mirror of https://gitee.com/openkylin/linux.git
48 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Linus Torvalds
|
8a5be36b93 |
powerpc updates for 5.11
- Switch to the generic C VDSO, as well as some cleanups of our VDSO
setup/handling code.
- Support for KUAP (Kernel User Access Prevention) on systems using the hashed
page table MMU, using memory protection keys.
- Better handling of PowerVM SMT8 systems where all threads of a core do not
share an L2, allowing the scheduler to make better scheduling decisions.
- Further improvements to our machine check handling.
- Show registers when unwinding interrupt frames during stack traces.
- Improvements to our pseries (PowerVM) partition migration code.
- Several series from Christophe refactoring and cleaning up various parts of
the 32-bit code.
- Other smaller features, fixes & cleanups.
Thanks to:
Alan Modra, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Ard
Biesheuvel, Athira Rajeev, Balamuruhan S, Bill Wendling, Cédric Le Goater,
Christophe Leroy, Christophe Lombard, Colin Ian King, Daniel Axtens, David
Hildenbrand, Frederic Barrat, Ganesh Goudar, Gautham R. Shenoy, Geert
Uytterhoeven, Giuseppe Sacco, Greg Kurz, Harish, Jan Kratochvil, Jordan
Niethe, Kaixu Xia, Laurent Dufour, Leonardo Bras, Madhavan Srinivasan, Mahesh
Salgaonkar, Mathieu Desnoyers, Nathan Lynch, Nicholas Piggin, Oleg Nesterov,
Oliver O'Halloran, Oscar Salvador, Po-Hsu Lin, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sandipan Das, Sebastian Andrzej Siewior ,
Segher Boessenkool, Srikar Dronamraju, Tyrel Datwyler, Uwe Kleine-König,
Vincent Stehlé, Youling Tang, Zhang Xiaoxu.
-----BEGIN PGP SIGNATURE-----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=Ga3K
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Switch to the generic C VDSO, as well as some cleanups of our VDSO
setup/handling code.
- Support for KUAP (Kernel User Access Prevention) on systems using the
hashed page table MMU, using memory protection keys.
- Better handling of PowerVM SMT8 systems where all threads of a core
do not share an L2, allowing the scheduler to make better scheduling
decisions.
- Further improvements to our machine check handling.
- Show registers when unwinding interrupt frames during stack traces.
- Improvements to our pseries (PowerVM) partition migration code.
- Several series from Christophe refactoring and cleaning up various
parts of the 32-bit code.
- Other smaller features, fixes & cleanups.
Thanks to: Alan Modra, Alexey Kardashevskiy, Andrew Donnellan, Aneesh
Kumar K.V, Ard Biesheuvel, Athira Rajeev, Balamuruhan S, Bill Wendling,
Cédric Le Goater, Christophe Leroy, Christophe Lombard, Colin Ian King,
Daniel Axtens, David Hildenbrand, Frederic Barrat, Ganesh Goudar,
Gautham R. Shenoy, Geert Uytterhoeven, Giuseppe Sacco, Greg Kurz,
Harish, Jan Kratochvil, Jordan Niethe, Kaixu Xia, Laurent Dufour,
Leonardo Bras, Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu
Desnoyers, Nathan Lynch, Nicholas Piggin, Oleg Nesterov, Oliver
O'Halloran, Oscar Salvador, Po-Hsu Lin, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sandipan Das, Sebastian Andrzej
Siewior , Segher Boessenkool, Srikar Dronamraju, Tyrel Datwyler, Uwe
Kleine-König, Vincent Stehlé, Youling Tang, and Zhang Xiaoxu.
* tag 'powerpc-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (304 commits)
powerpc/32s: Fix cleanup_cpu_mmu_context() compile bug
powerpc: Add config fragment for disabling -Werror
powerpc/configs: Add ppc64le_allnoconfig target
powerpc/powernv: Rate limit opal-elog read failure message
powerpc/pseries/memhotplug: Quieten some DLPAR operations
powerpc/ps3: use dma_mapping_error()
powerpc: force inlining of csum_partial() to avoid multiple csum_partial() with GCC10
powerpc/perf: Fix Threshold Event Counter Multiplier width for P10
powerpc/mm: Fix hugetlb_free_pmd_range() and hugetlb_free_pud_range()
KVM: PPC: Book3S HV: Fix mask size for emulated msgsndp
KVM: PPC: fix comparison to bool warning
KVM: PPC: Book3S: Assign boolean values to a bool variable
powerpc: Inline setup_kup()
powerpc/64s: Mark the kuap/kuep functions non __init
KVM: PPC: Book3S HV: XIVE: Add a comment regarding VP numbering
powerpc/xive: Improve error reporting of OPAL calls
powerpc/xive: Simplify xive_do_source_eoi()
powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_EOI_FW
powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_MASK_FW
powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_SHIFT_BUG
...
|
|
|
Cédric Le Goater
|
b5277d18c6 |
powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_MASK_FW
This flag was used to support the PHB4 LSIs on P9 DD1 and we have stopped supporting this CPU when DD2 came out. See skiboot commit: https://github.com/open-power/skiboot/commit/0b0d15e3c170 Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201210171450.1933725-10-clg@kaod.org |
|
|
Cédric Le Goater
|
4f1c3f7b08 |
powerpc/xive: Rename XIVE_IRQ_NO_EOI to show its a flag
This is a simple cleanup to identify easily all flags of the XIVE interrupt structure. The interrupts flagged with XIVE_IRQ_FLAG_NO_EOI are the escalations used to wake up vCPUs in KVM. They are handled very differently from the rest. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201210171450.1933725-3-clg@kaod.org |
|
|
Cédric Le Goater
|
9898367500 |
KVM: PPC: Book3S HV: XIVE: Show detailed configuration in debug output
This is useful to track allocation of the HW resources on per guest basis. Making sure IPIs are local to the chip of the vCPUs reduces rerouting between interrupt controllers and gives better performance in case of pinning. Checking the distribution of VP structures on the chips also helps in reducing PowerBUS traffic. [ clg: resurrected show_sources and reworked ouput ] Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201210171450.1933725-2-clg@kaod.org |
|
|
Greg Kurz
|
f54db39fbe |
KVM: PPC: Book3S HV: XIVE: Fix vCPU id sanity check
Commit |
|
|
Greg Kurz
|
6a3163212f |
KVM: PPC: Book3S HV: XIVE: Fix typo in comment
Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/156219139988.578018.1046848908285019838.stgit@bahia.lan |
|
|
Greg Kurz
|
efe5ddcae4 |
KVM: PPC: Book3S HV: XIVE: Allow userspace to set the # of VPs
Add a new attribute to both XIVE and XICS-on-XIVE KVM devices so that userspace can tell how many interrupt servers it needs. If a VM needs less than the current default of KVM_MAX_VCPUS (2048), we can allocate less VPs in OPAL. Combined with a core stride (VSMT) that matches the number of guest threads per core, this may substantially increases the number of VMs that can run concurrently with an in-kernel XIVE device. Since the legacy XIVE KVM device is exposed to userspace through the XICS KVM API, a new attribute group is added to it for this purpose. While here, fix the syntax of the existing KVM_DEV_XICS_GRP_SOURCES in the XICS documentation. Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> |
|
|
Greg Kurz
|
062cfab706 |
KVM: PPC: Book3S HV: XIVE: Make VP block size configurable
The XIVE VP is an internal structure which allow the XIVE interrupt
controller to maintain the interrupt context state of vCPUs non
dispatched on HW threads.
When a guest is started, the XIVE KVM device allocates a block of
XIVE VPs in OPAL, enough to accommodate the highest possible vCPU
id KVM_MAX_VCPU_ID (16384) packed down to KVM_MAX_VCPUS (2048).
With a guest's core stride of 8 and a threading mode of 1 (QEMU's
default), a VM must run at least 256 vCPUs to actually need such a
range of VPs.
A POWER9 system has a limited XIVE VP space : 512k and KVM is
currently wasting this HW resource with large VP allocations,
especially since a typical VM likely runs with a lot less vCPUs.
Make the size of the VP block configurable. Add an nr_servers
field to the XIVE structure and a function to set it for this
purpose.
Split VP allocation out of the device create function. Since the
VP block isn't used before the first vCPU connects to the XIVE KVM
device, allocation is now performed by kvmppc_xive_connect_vcpu().
This gives the opportunity to set nr_servers in between:
kvmppc_xive_create() / kvmppc_xive_native_create()
.
.
kvmppc_xive_set_nr_servers()
.
.
kvmppc_xive_connect_vcpu() / kvmppc_xive_native_connect_vcpu()
The connect_vcpu() functions check that the vCPU id is below nr_servers
and if it is the first vCPU they allocate the VP block. This is protected
against a concurrent update of nr_servers by kvmppc_xive_set_nr_servers()
with the xive->lock mutex.
Also, the block is allocated once for the device lifetime: nr_servers
should stay constant otherwise connect_vcpu() could generate a boggus
VP id and likely crash OPAL. It is thus forbidden to update nr_servers
once the block is allocated.
If the VP allocation fail, return ENOSPC which seems more appropriate to
report the depletion of system wide HW resource than ENOMEM or ENXIO.
A VM using a stride of 8 and 1 thread per core with 32 vCPUs would hence
only need 256 VPs instead of 2048. If the stride is set to match the number
of threads per core, this goes further down to 32.
This will be exposed to userspace by a subsequent patch.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
|
Greg Kurz
|
8db29ea239 |
KVM: PPC: Book3S HV: XIVE: Compute the VP id in a common helper
Reduce code duplication by consolidating the checking of vCPU ids and VP ids to a common helper used by both legacy and native XIVE KVM devices. And explain the magic with a comment. Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> |
|
|
Greg Kurz
|
8a4e7597ba |
KVM: PPC: Book3S HV: XIVE: Show VP id in debugfs
Print out the VP id of each connected vCPU, this allow to see: - the VP block base in which OPAL encodes information that may be useful when debugging - the packed vCPU id which may differ from the raw vCPU id if the latter is >= KVM_MAX_VCPUS (2048) Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> |
|
|
Greg Kurz
|
e7d71c9430 |
KVM: PPC: Book3S HV: XIVE: Set kvm->arch.xive when VPs are allocated
If we cannot allocate the XIVE VPs in OPAL, the creation of a XIVE or
XICS-on-XIVE device is aborted as expected, but we leave kvm->arch.xive
set forever since the release method isn't called in this case. Any
subsequent tentative to create a XIVE or XICS-on-XIVE for this VM will
thus always fail (DoS). This is a problem for QEMU since it destroys
and re-creates these devices when the VM is reset: the VM would be
restricted to using the much slower emulated XIVE or XICS forever.
As an alternative to adding rollback, do not assign kvm->arch.xive before
making sure the XIVE VPs are allocated in OPAL.
Cc: stable@vger.kernel.org # v5.2
Fixes:
|
|
|
Greg Kurz
|
12ade69c1e |
KVM: PPC: Book3S HV: XIVE: Ensure VP isn't already in use
Connecting a vCPU to a XIVE KVM device means establishing a 1:1 association between a vCPU id and the offset (VP id) of a VP structure within a fixed size block of VPs. We currently try to enforce the 1:1 relationship by checking that a vCPU with the same id isn't already connected. This is good but unfortunately not enough because we don't map VP ids to raw vCPU ids but to packed vCPU ids, and the packing function kvmppc_pack_vcpu_id() isn't bijective by design. We got away with it because QEMU passes vCPU ids that fit well in the packing pattern. But nothing prevents userspace to come up with a forged vCPU id resulting in a packed id collision which causes the KVM device to associate two vCPUs to the same VP. This greatly confuses the irq layer and ultimately crashes the kernel, as shown below. Example: a guest with 1 guest thread per core, a core stride of 8 and 300 vCPUs has vCPU ids 0,8,16...2392. If QEMU is patched to inject at some point an invalid vCPU id 348, which is the packed version of itself and 2392, we get: genirq: Flags mismatch irq 199. 00010000 (kvm-2-2392) vs. 00010000 (kvm-2-348) CPU: 24 PID: 88176 Comm: qemu-system-ppc Not tainted 5.3.0-xive-nr-servers-5.3-gku+ #38 Call Trace: [c000003f7f9937e0] [c000000000c0110c] dump_stack+0xb0/0xf4 (unreliable) [c000003f7f993820] [c0000000001cb480] __setup_irq+0xa70/0xad0 [c000003f7f9938d0] [c0000000001cb75c] request_threaded_irq+0x13c/0x260 [c000003f7f993940] [c00800000d44e7ac] kvmppc_xive_attach_escalation+0x104/0x270 [kvm] [c000003f7f9939d0] [c00800000d45013c] kvmppc_xive_connect_vcpu+0x424/0x620 [kvm] [c000003f7f993ac0] [c00800000d444428] kvm_arch_vcpu_ioctl+0x260/0x448 [kvm] [c000003f7f993b90] [c00800000d43593c] kvm_vcpu_ioctl+0x154/0x7c8 [kvm] [c000003f7f993d00] [c0000000004840f0] do_vfs_ioctl+0xe0/0xc30 [c000003f7f993db0] [c000000000484d44] ksys_ioctl+0x104/0x120 [c000003f7f993e00] [c000000000484d88] sys_ioctl+0x28/0x80 [c000003f7f993e20] [c00000000000b278] system_call+0x5c/0x68 xive-kvm: Failed to request escalation interrupt for queue 0 of VCPU 2392 ------------[ cut here ]------------ remove_proc_entry: removing non-empty directory 'irq/199', leaking at least 'kvm-2-348' WARNING: CPU: 24 PID: 88176 at /home/greg/Work/linux/kernel-kvm-ppc/fs/proc/generic.c:684 remove_proc_entry+0x1ec/0x200 Modules linked in: kvm_hv kvm dm_mod vhost_net vhost tap xt_CHECKSUM iptable_mangle xt_MASQUERADE iptable_nat nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter squashfs loop fuse i2c_dev sg ofpart ocxl powernv_flash at24 xts mtd uio_pdrv_genirq vmx_crypto opal_prd ipmi_powernv uio ipmi_devintf ipmi_msghandler ibmpowernv ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables ext4 mbcache jbd2 raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq libcrc32c raid1 raid0 linear sd_mod ast i2c_algo_bit drm_vram_helper ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ahci libahci libata tg3 drm_panel_orientation_quirks [last unloaded: kvm] CPU: 24 PID: 88176 Comm: qemu-system-ppc Not tainted 5.3.0-xive-nr-servers-5.3-gku+ #38 NIP: c00000000053b0cc LR: c00000000053b0c8 CTR: c0000000000ba3b0 REGS: c000003f7f9934b0 TRAP: 0700 Not tainted (5.3.0-xive-nr-servers-5.3-gku+) MSR: 9000000000029033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 48228222 XER: 20040000 CFAR: c000000000131a50 IRQMASK: 0 GPR00: c00000000053b0c8 c000003f7f993740 c0000000015ec500 0000000000000057 GPR04: 0000000000000001 0000000000000000 000049fb98484262 0000000000001bcf GPR08: 0000000000000007 0000000000000007 0000000000000001 9000000000001033 GPR12: 0000000000008000 c000003ffffeb800 0000000000000000 000000012f4ce5a1 GPR16: 000000012ef5a0c8 0000000000000000 000000012f113bb0 0000000000000000 GPR20: 000000012f45d918 c000003f863758b0 c000003f86375870 0000000000000006 GPR24: c000003f86375a30 0000000000000007 c0002039373d9020 c0000000014c4a48 GPR28: 0000000000000001 c000003fe62a4f6b c00020394b2e9fab c000003fe62a4ec0 NIP [c00000000053b0cc] remove_proc_entry+0x1ec/0x200 LR [c00000000053b0c8] remove_proc_entry+0x1e8/0x200 Call Trace: [c000003f7f993740] [c00000000053b0c8] remove_proc_entry+0x1e8/0x200 (unreliable) [c000003f7f9937e0] [c0000000001d3654] unregister_irq_proc+0x114/0x150 [c000003f7f993880] [c0000000001c6284] free_desc+0x54/0xb0 [c000003f7f9938c0] [c0000000001c65ec] irq_free_descs+0xac/0x100 [c000003f7f993910] [c0000000001d1ff8] irq_dispose_mapping+0x68/0x80 [c000003f7f993940] [c00800000d44e8a4] kvmppc_xive_attach_escalation+0x1fc/0x270 [kvm] [c000003f7f9939d0] [c00800000d45013c] kvmppc_xive_connect_vcpu+0x424/0x620 [kvm] [c000003f7f993ac0] [c00800000d444428] kvm_arch_vcpu_ioctl+0x260/0x448 [kvm] [c000003f7f993b90] [c00800000d43593c] kvm_vcpu_ioctl+0x154/0x7c8 [kvm] [c000003f7f993d00] [c0000000004840f0] do_vfs_ioctl+0xe0/0xc30 [c000003f7f993db0] [c000000000484d44] ksys_ioctl+0x104/0x120 [c000003f7f993e00] [c000000000484d88] sys_ioctl+0x28/0x80 [c000003f7f993e20] [c00000000000b278] system_call+0x5c/0x68 Instruction dump: 2c230000 41820008 3923ff78 e8e900a0 3c82ff69 3c62ff8d 7fa6eb78 7fc5f378 3884f080 3863b948 4bbf6925 60000000 <0fe00000> 4bffff7c fba10088 4bbf6e41 ---[ end trace b925b67a74a1d8d1 ]--- BUG: Kernel NULL pointer dereference at 0x00000010 Faulting instruction address: 0xc00800000d44fc04 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix MMU=Hash SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: kvm_hv kvm dm_mod vhost_net vhost tap xt_CHECKSUM iptable_mangle xt_MASQUERADE iptable_nat nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter squashfs loop fuse i2c_dev sg ofpart ocxl powernv_flash at24 xts mtd uio_pdrv_genirq vmx_crypto opal_prd ipmi_powernv uio ipmi_devintf ipmi_msghandler ibmpowernv ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables ext4 mbcache jbd2 raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq libcrc32c raid1 raid0 linear sd_mod ast i2c_algo_bit drm_vram_helper ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ahci libahci libata tg3 drm_panel_orientation_quirks [last unloaded: kvm] CPU: 24 PID: 88176 Comm: qemu-system-ppc Tainted: G W 5.3.0-xive-nr-servers-5.3-gku+ #38 NIP: c00800000d44fc04 LR: c00800000d44fc00 CTR: c0000000001cd970 REGS: c000003f7f9938e0 TRAP: 0300 Tainted: G W (5.3.0-xive-nr-servers-5.3-gku+) MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 24228882 XER: 20040000 CFAR: c0000000001cd9ac DAR: 0000000000000010 DSISR: 40000000 IRQMASK: 0 GPR00: c00800000d44fc00 c000003f7f993b70 c00800000d468300 0000000000000000 GPR04: 00000000000000c7 0000000000000000 0000000000000000 c000003ffacd06d8 GPR08: 0000000000000000 c000003ffacd0738 0000000000000000 fffffffffffffffd GPR12: 0000000000000040 c000003ffffeb800 0000000000000000 000000012f4ce5a1 GPR16: 000000012ef5a0c8 0000000000000000 000000012f113bb0 0000000000000000 GPR20: 000000012f45d918 00007ffffe0d9a80 000000012f4f5df0 000000012ef8c9f8 GPR24: 0000000000000001 0000000000000000 c000003fe4501ed0 c000003f8b1d0000 GPR28: c0000033314689c0 c000003fe4501c00 c000003fe4501e70 c000003fe4501e90 NIP [c00800000d44fc04] kvmppc_xive_cleanup_vcpu+0xfc/0x210 [kvm] LR [c00800000d44fc00] kvmppc_xive_cleanup_vcpu+0xf8/0x210 [kvm] Call Trace: [c000003f7f993b70] [c00800000d44fc00] kvmppc_xive_cleanup_vcpu+0xf8/0x210 [kvm] (unreliable) [c000003f7f993bd0] [c00800000d450bd4] kvmppc_xive_release+0xdc/0x1b0 [kvm] [c000003f7f993c30] [c00800000d436a98] kvm_device_release+0xb0/0x110 [kvm] [c000003f7f993c70] [c00000000046730c] __fput+0xec/0x320 [c000003f7f993cd0] [c000000000164ae0] task_work_run+0x150/0x1c0 [c000003f7f993d30] [c000000000025034] do_notify_resume+0x304/0x440 [c000003f7f993e20] [c00000000000dcc4] ret_from_except_lite+0x70/0x74 Instruction dump: 3bff0008 7fbfd040 419e0054 847e0004 2fa30000 419effec e93d0000 8929203c 2f890000 419effb8 4800821d e8410018 <e9230010> e9490008 9b2a0039 7c0004ac ---[ end trace b925b67a74a1d8d2 ]--- Kernel panic - not syncing: Fatal exception This affects both XIVE and XICS-on-XIVE devices since the beginning. Check the VP id instead of the vCPU id when a new vCPU is connected. The allocation of the XIVE CPU structure in kvmppc_xive_connect_vcpu() is moved after the check to avoid the need for rollback. Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> |
|
|
Paul Mackerras
|
da15c03b04 |
powerpc/xive: Implement get_irqchip_state method for XIVE to fix shutdown race
Testing has revealed the existence of a race condition where a XIVE interrupt being shut down can be in one of the XIVE interrupt queues (of which there are up to 8 per CPU, one for each priority) at the point where free_irq() is called. If this happens, can return an interrupt number which has been shut down. This can lead to various symptoms: - irq_to_desc(irq) can be NULL. In this case, no end-of-interrupt function gets called, resulting in the CPU's elevated interrupt priority (numerically lowered CPPR) never gets reset. That then means that the CPU stops processing interrupts, causing device timeouts and other errors in various device drivers. - The irq descriptor or related data structures can be in the process of being freed as the interrupt code is using them. This typically leads to crashes due to bad pointer dereferences. This race is basically what commit |
|
|
Paul Mackerras
|
8d4ba9c931 |
KVM: PPC: Book3S HV: Don't push XIVE context when not using XIVE device
At present, when running a guest on POWER9 using HV KVM but not using
an in-kernel interrupt controller (XICS or XIVE), for example if QEMU
is run with the kernel_irqchip=off option, the guest entry code goes
ahead and tries to load the guest context into the XIVE hardware, even
though no context has been set up.
To fix this, we check that the "CAM word" is non-zero before pushing
it to the hardware. The CAM word is initialized to a non-zero value
in kvmppc_xive_connect_vcpu() and kvmppc_xive_native_connect_vcpu(),
and is now cleared in kvmppc_xive_{,native_}cleanup_vcpu.
Fixes:
|
|
|
Cédric Le Goater
|
237aed48c6 |
KVM: PPC: Book3S HV: XIVE: Free escalation interrupts before disabling the VP
When a vCPU is brought done, the XIVE VP (Virtual Processor) is first disabled and then the event notification queues are freed. When freeing the queues, we check for possible escalation interrupts and free them also. But when a XIVE VP is disabled, the underlying XIVE ENDs also are disabled in OPAL. When an END (Event Notification Descriptor) is disabled, its ESB pages (ESn and ESe) are disabled and loads return all 1s. Which means that any access on the ESB page of the escalation interrupt will return invalid values. When an interrupt is freed, the shutdown handler computes a 'saved_p' field from the value returned by a load in xive_do_source_set_mask(). This value is incorrect for escalation interrupts for the reason described above. This has no impact on Linux/KVM today because we don't make use of it but we will introduce in future changes a xive_get_irqchip_state() handler. This handler will use the 'saved_p' field to return the state of an interrupt and 'saved_p' being incorrect, softlockup will occur. Fix the vCPU cleanup sequence by first freeing the escalation interrupts if any, then disable the XIVE VP and last free the queues. Fixes: |
|
|
Cédric Le Goater
|
9798f4ea71 |
KVM: PPC: Book3S HV: XIVE: fix rollback when kvmppc_xive_create fails
The XIVE device structure is now allocated in kvmppc_xive_get_device()
and kfree'd in kvmppc_core_destroy_vm(). In case of an OPAL error when
allocating the XIVE VPs, the kfree() call in kvmppc_xive_*create()
will result in a double free and corrupt the host memory.
Fixes:
|
|
|
Thomas Gleixner
|
d2912cb15b |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Cédric Le Goater
|
ef97402040 |
KVM: PPC: Book3S HV: XIVE: Do not clear IRQ data of passthrough interrupts
The passthrough interrupts are defined at the host level and their IRQ
data should not be cleared unless specifically deconfigured (shutdown)
by the host. They differ from the IPI interrupts which are allocated
by the XIVE KVM device and reserved to the guest usage only.
This fixes a host crash when destroying a VM in which a PCI adapter
was passed-through. In this case, the interrupt is cleared and freed
by the KVM device and then shutdown by vfio at the host level.
[ 1007.360265] BUG: Kernel NULL pointer dereference at 0x00000d00
[ 1007.360285] Faulting instruction address: 0xc00000000009da34
[ 1007.360296] Oops: Kernel access of bad area, sig: 7 [#1]
[ 1007.360303] LE PAGE_SIZE=64K MMU=Radix MMU=Hash SMP NR_CPUS=2048 NUMA PowerNV
[ 1007.360314] Modules linked in: vhost_net vhost iptable_mangle ipt_MASQUERADE iptable_nat nf_nat xt_conntrack nf_conntrack nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4 tun bridge stp llc kvm_hv kvm xt_tcpudp iptable_filter squashfs fuse binfmt_misc vmx_crypto ib_iser rdma_cm iw_cm ib_cm libiscsi scsi_transport_iscsi nfsd ip_tables x_tables autofs4 btrfs zstd_decompress zstd_compress lzo_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq multipath mlx5_ib ib_uverbs ib_core crc32c_vpmsum mlx5_core
[ 1007.360425] CPU: 9 PID: 15576 Comm: CPU 18/KVM Kdump: loaded Not tainted 5.1.0-gad7e7d0ef #4
[ 1007.360454] NIP: c00000000009da34 LR: c00000000009e50c CTR: c00000000009e5d0
[ 1007.360482] REGS: c000007f24ccf330 TRAP: 0300 Not tainted (5.1.0-gad7e7d0ef)
[ 1007.360500] MSR: 900000000280b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24002484 XER: 00000000
[ 1007.360532] CFAR: c00000000009da10 DAR: 0000000000000d00 DSISR: 00080000 IRQMASK: 1
[ 1007.360532] GPR00: c00000000009e62c c000007f24ccf5c0 c000000001510600 c000007fe7f947c0
[ 1007.360532] GPR04: 0000000000000d00 0000000000000000 0000000000000000 c000005eff02d200
[ 1007.360532] GPR08: 0000000000400000 0000000000000000 0000000000000000 fffffffffffffffd
[ 1007.360532] GPR12: c00000000009e5d0 c000007fffff7b00 0000000000000031 000000012c345718
[ 1007.360532] GPR16: 0000000000000000 0000000000000008 0000000000418004 0000000000040100
[ 1007.360532] GPR20: 0000000000000000 0000000008430000 00000000003c0000 0000000000000027
[ 1007.360532] GPR24: 00000000000000ff 0000000000000000 00000000000000ff c000007faa90d98c
[ 1007.360532] GPR28: c000007faa90da40 00000000000fe040 ffffffffffffffff c000007fe7f947c0
[ 1007.360689] NIP [c00000000009da34] xive_esb_read+0x34/0x120
[ 1007.360706] LR [c00000000009e50c] xive_do_source_set_mask.part.0+0x2c/0x50
[ 1007.360732] Call Trace:
[ 1007.360738] [c000007f24ccf5c0] [c000000000a6383c] snooze_loop+0x15c/0x270 (unreliable)
[ 1007.360775] [c000007f24ccf5f0] [c00000000009e62c] xive_irq_shutdown+0x5c/0xe0
[ 1007.360795] [c000007f24ccf630] [c00000000019e4a0] irq_shutdown+0x60/0xe0
[ 1007.360813] [c000007f24ccf660] [c000000000198c44] __free_irq+0x3a4/0x420
[ 1007.360831] [c000007f24ccf700] [c000000000198dc8] free_irq+0x78/0xe0
[ 1007.360849] [c000007f24ccf730] [c00000000096c5a8] vfio_msi_set_vector_signal+0xa8/0x350
[ 1007.360878] [c000007f24ccf7f0] [c00000000096c938] vfio_msi_set_block+0xe8/0x1e0
[ 1007.360899] [c000007f24ccf850] [c00000000096cae0] vfio_msi_disable+0xb0/0x110
[ 1007.360912] [c000007f24ccf8a0] [c00000000096cd04] vfio_pci_set_msi_trigger+0x1c4/0x3d0
[ 1007.360922] [c000007f24ccf910] [c00000000096d910] vfio_pci_set_irqs_ioctl+0xa0/0x170
[ 1007.360941] [c000007f24ccf930] [c00000000096b400] vfio_pci_disable+0x80/0x5e0
[ 1007.360963] [c000007f24ccfa10] [c00000000096b9bc] vfio_pci_release+0x5c/0x90
[ 1007.360991] [c000007f24ccfa40] [c000000000963a9c] vfio_device_fops_release+0x3c/0x70
[ 1007.361012] [c000007f24ccfa70] [c0000000003b5668] __fput+0xc8/0x2b0
[ 1007.361040] [c000007f24ccfac0] [c0000000001409b0] task_work_run+0x140/0x1b0
[ 1007.361059] [c000007f24ccfb20] [c000000000118f8c] do_exit+0x3ac/0xd00
[ 1007.361076] [c000007f24ccfc00] [c0000000001199b0] do_group_exit+0x60/0x100
[ 1007.361094] [c000007f24ccfc40] [c00000000012b514] get_signal+0x1a4/0x8f0
[ 1007.361112] [c000007f24ccfd30] [c000000000021cc8] do_notify_resume+0x1a8/0x430
[ 1007.361141] [c000007f24ccfe20] [c00000000000e444] ret_from_except_lite+0x70/0x74
[ 1007.361159] Instruction dump:
[ 1007.361175] 38422c00 e9230000 712a0004 41820010 548a2036 7d442378 78840020 71290020
[ 1007.361194] 4082004c e9230010 7c892214 7c0004ac <e9240000> 0c090000 4c00012c 792a0022
Cc: stable@vger.kernel.org # v4.12+
Fixes:
|
|
|
Cédric Le Goater
|
7e10b9a6da |
KVM: PPC: Book3S HV: XIVE: Introduce a new mutex for the XIVE device
The XICS-on-XIVE KVM device needs to allocate XIVE event queues when a priority is used by the OS. This is referred as EQ provisioning and it is done under the hood when : 1. a CPU is hot-plugged in the VM 2. the "set-xive" is called at VM startup 3. sources are restored at VM restore The kvm->lock mutex is used to protect the different XIVE structures being modified but in some contexts, kvm->lock is taken under the vcpu->mutex which is not permitted by the KVM locking rules. Introduce a new mutex 'lock' for the KVM devices for them to synchronize accesses to the XIVE device structures. Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> |
|
|
Paul Mackerras
|
c395fe1d8e |
KVM: PPC: Book3S HV: Avoid touching arch.mmu_ready in XIVE release functions
Currently, kvmppc_xive_release() and kvmppc_xive_native_release() clear kvm->arch.mmu_ready and call kick_all_cpus_sync() as a way of ensuring that no vcpus are executing in the guest. However, future patches will change the mutex associated with kvm->arch.mmu_ready to a new mutex that nests inside the vcpu mutexes, making it difficult to continue to use this method. In fact, taking the vcpu mutex for a vcpu excludes execution of that vcpu, and we already take the vcpu mutex around the call to kvmppc_xive_[native_]cleanup_vcpu(). Once the cleanup function is done and we release the vcpu mutex, the vcpu can execute once again, but because we have cleared vcpu->arch.xive_vcpu, vcpu->arch.irq_type, vcpu->arch.xive_esc_vaddr and vcpu->arch.xive_esc_raddr, that vcpu will not be going into XIVE code any more. Thus, once we have cleaned up all of the vcpus, we are safe to clean up the rest of the XIVE state, and we don't need to use kvm->arch.mmu_ready to hold off vcpu execution. Signed-off-by: Paul Mackerras <paulus@ozlabs.org> |
|
|
Paul Mackerras
|
0caecf5b00 |
KVM: PPC: Book3S HV: XIVE: Clear escalation interrupt pointers on device close
This adds code to ensure that after a XIVE or XICS-on-XIVE KVM device is closed, KVM will not try to enable or disable any of the escalation interrupts for the VCPUs. We don't have to worry about races between clearing the pointers and use of the pointers by the XIVE context push/pull code, because the callers hold the vcpu->mutex, which is also taken by the KVM_RUN code. Therefore the vcpu cannot be entering or exiting the guest concurrently. Signed-off-by: Paul Mackerras <paulus@ozlabs.org> |
|
|
Paul Mackerras
|
6f868405fa |
KVM: PPC: Book3S HV: XIVE: Prevent races when releasing device
Now that we have the possibility of a XIVE or XICS-on-XIVE device being released while the VM is still running, we need to be careful about races and potential use-after-free bugs. Although the kvmppc_xive struct is not freed, but kept around for re-use, the kvmppc_xive_vcpu structs are freed, and they are used extensively in both the XIVE native and XICS-on-XIVE code. There are various ways in which XIVE code gets invoked: - VCPU entry and exit, which do push and pull operations on the XIVE hardware - one_reg get and set functions (vcpu->mutex is held) - XICS hypercalls (but only inside guest execution, not from kvmppc_pseries_do_hcall) - device creation calls (kvm->lock is held) - device callbacks - get/set attribute, mmap, pagefault, release/destroy - set_mapped/clr_mapped calls (kvm->lock is held) - connect_vcpu calls - debugfs file read callbacks Inside a device release function, we know that userspace cannot have an open file descriptor referring to the device, nor can it have any mmapped regions from the device. Therefore the device callbacks are excluded, as are the connect_vcpu calls (since they need a fd for the device). Further, since the caller holds the kvm->lock mutex, no other device creation calls or set/clr_mapped calls can be executing concurrently. To exclude VCPU execution and XICS hypercalls, we temporarily set kvm->arch.mmu_ready to 0. This forces any VCPU task that is trying to enter the guest to take the kvm->lock mutex, which is held by the caller of the release function. Then, sending an IPI to all other CPUs forces any VCPU currently executing in the guest to exit. Finally, we take the vcpu->mutex for each VCPU around the process of cleaning up and freeing its XIVE data structures, in order to exclude any one_reg get/set calls. To exclude the debugfs read callbacks, we just need to ensure that debugfs_remove is called before freeing any data structures. Once it returns we know that no CPU can be executing the callbacks (for our kvmppc_xive instance). Signed-off-by: Paul Mackerras <paulus@ozlabs.org> |
|
|
Cédric Le Goater
|
5422e95103 |
KVM: PPC: Book3S HV: XIVE: Replace the 'destroy' method by a 'release' method
When a P9 sPAPR VM boots, the CAS negotiation process determines which interrupt mode to use (XICS legacy or XIVE native) and invokes a machine reset to activate the chosen mode. We introduce 'release' methods for the XICS-on-XIVE and the XIVE native KVM devices which are called when the file descriptor of the device is closed after the TIMA and ESB pages have been unmapped. They perform the necessary cleanups : clear the vCPU interrupt presenters that could be attached and then destroy the device. The 'release' methods replace the 'destroy' methods as 'destroy' is not called anymore once 'release' is. Compatibility with older QEMU is nevertheless maintained. This is not considered as a safe operation as the vCPUs are still running and could be referencing the KVM device through their presenters. To protect the system from any breakage, the kvmppc_xive objects representing both KVM devices are now stored in an array under the VM. Allocation is performed on first usage and memory is freed only when the VM exits. [paulus@ozlabs.org - Moved freeing of xive structures to book3s.c, put it under #ifdef CONFIG_KVM_XICS.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> |
|
|
Cédric Le Goater
|
232b984b7d |
KVM: PPC: Book3S HV: XIVE: Add passthrough support
The KVM XICS-over-XIVE device and the proposed KVM XIVE native device implement an IRQ space for the guest using the generic IPI interrupts of the XIVE IC controller. These interrupts are allocated at the OPAL level and "mapped" into the guest IRQ number space in the range 0-0x1FFF. Interrupt management is performed in the XIVE way: using loads and stores on the addresses of the XIVE IPI interrupt ESB pages. Both KVM devices share the same internal structure caching information on the interrupts, among which the xive_irq_data struct containing the addresses of the IPI ESB pages and an extra one in case of pass-through. The later contains the addresses of the ESB pages of the underlying HW controller interrupts, PHB4 in all cases for now. A guest, when running in the XICS legacy interrupt mode, lets the KVM XICS-over-XIVE device "handle" interrupt management, that is to perform the loads and stores on the addresses of the ESB pages of the guest interrupts. However, when running in XIVE native exploitation mode, the KVM XIVE native device exposes the interrupt ESB pages to the guest and lets the guest perform directly the loads and stores. The VMA exposing the ESB pages make use of a custom VM fault handler which role is to populate the VMA with appropriate pages. When a fault occurs, the guest IRQ number is deduced from the offset, and the ESB pages of associated XIVE IPI interrupt are inserted in the VMA (using the internal structure caching information on the interrupts). Supporting device passthrough in the guest running in XIVE native exploitation mode adds some extra refinements because the ESB pages of a different HW controller (PHB4) need to be exposed to the guest along with the initial IPI ESB pages of the XIVE IC controller. But the overall mechanic is the same. When the device HW irqs are mapped into or unmapped from the guest IRQ number space, the passthru_irq helpers, kvmppc_xive_set_mapped() and kvmppc_xive_clr_mapped(), are called to record or clear the passthrough interrupt information and to perform the switch. The approach taken by this patch is to clear the ESB pages of the guest IRQ number being mapped and let the VM fault handler repopulate. The handler will insert the ESB page corresponding to the HW interrupt of the device being passed-through or the initial IPI ESB page if the device is being removed. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> |
|
|
Cédric Le Goater
|
13ce3297c5 |
KVM: PPC: Book3S HV: XIVE: Add controls for the EQ configuration
These controls will be used by the H_INT_SET_QUEUE_CONFIG and H_INT_GET_QUEUE_CONFIG hcalls from QEMU to configure the underlying Event Queue in the XIVE IC. They will also be used to restore the configuration of the XIVE EQs and to capture the internal run-time state of the EQs. Both 'get' and 'set' rely on an OPAL call to access the EQ toggle bit and EQ index which are updated by the XIVE IC when event notifications are enqueued in the EQ. The value of the guest physical address of the event queue is saved in the XIVE internal xive_q structure for later use. That is when migration needs to mark the EQ pages dirty to capture a consistent memory state of the VM. To be noted that H_INT_SET_QUEUE_CONFIG does not require the extra OPAL call setting the EQ toggle bit and EQ index to configure the EQ, but restoring the EQ state will. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> |
|
|
Cédric Le Goater
|
e8676ce50e |
KVM: PPC: Book3S HV: XIVE: Add a control to configure a source
This control will be used by the H_INT_SET_SOURCE_CONFIG hcall from QEMU to configure the target of a source and also to restore the configuration of a source when migrating the VM. The XIVE source interrupt structure is extended with the value of the Effective Interrupt Source Number. The EISN is the interrupt number pushed in the event queue that the guest OS will use to dispatch events internally. Caching the EISN value in KVM eases the test when checking if a reconfiguration is indeed needed. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> |
|
|
Cédric Le Goater
|
4131f83c3d |
KVM: PPC: Book3S HV: XIVE: add a control to initialize a source
The XIVE KVM device maintains a list of interrupt sources for the VM which are allocated in the pool of generic interrupts (IPIs) of the main XIVE IC controller. These are used for the CPU IPIs as well as for virtual device interrupts. The IRQ number space is defined by QEMU. The XIVE device reuses the source structures of the XICS-on-XIVE device for the source blocks (2-level tree) and for the source interrupts. Under XIVE native, the source interrupt caches mostly configuration information and is less used than under the XICS-on-XIVE device in which hcalls are still necessary at run-time. When a source is initialized in KVM, an IPI interrupt source is simply allocated at the OPAL level and then MASKED. KVM only needs to know about its type: LSI or MSI. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> |
|
|
Cédric Le Goater
|
eacc56bb9d |
KVM: PPC: Book3S HV: XIVE: Introduce a new capability KVM_CAP_PPC_IRQ_XIVE
The user interface exposes a new capability KVM_CAP_PPC_IRQ_XIVE to let QEMU connect the vCPU presenters to the XIVE KVM device if required. The capability is not advertised for now as the full support for the XIVE native exploitation mode is not yet available. When this is case, the capability will be advertised on PowerNV Hypervisors only. Nested guests (pseries KVM Hypervisor) are not supported. Internally, the interface to the new KVM device is protected with a new interrupt mode: KVMPPC_IRQ_XIVE. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> |
|
|
Yangtao Li
|
0f6ddf34be |
KVM: PPC: Book3S HV: Change to use DEFINE_SHOW_ATTRIBUTE macro
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> |
|
|
Paul Mackerras
|
95a6432ce9 |
KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests
This creates an alternative guest entry/exit path which is used for radix guests on POWER9 systems when we have indep_threads_mode=Y. In these circumstances there is exactly one vcpu per vcore and there is no coordination required between vcpus or vcores; the vcpu can enter the guest without needing to synchronize with anything else. The new fast path is implemented almost entirely in C in book3s_hv.c and runs with the MMU on until the guest is entered. On guest exit we use the existing path until the point where we are committed to exiting the guest (as distinct from handling an interrupt in the low-level code and returning to the guest) and we have pulled the guest context from the XIVE. At that point we check a flag in the stack frame to see whether we came in via the old path and the new path; if we came in via the new path then we go back to C code to do the rest of the process of saving the guest context and restoring the host context. The C code is split into separate functions for handling the OS-accessible state and the hypervisor state, with the idea that the latter can be replaced by a hypercall when we implement nested virtualization. Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [mpe: Fix CONFIG_ALTIVEC=n build] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> |
|
|
Finn Thain
|
3cc97bea60 |
treewide: correct "differenciate" and "instanciate" typos
Also add these typos to spelling.txt so checkpatch.pl will look for them. Link: http://lkml.kernel.org/r/88af06b9de34d870cb0afc46cfd24e0458be2575.1529471371.git.fthain@telegraphics.com.au Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Sam Bobroff
|
1e175d2e07 |
KVM: PPC: Book3S HV: Pack VCORE IDs to access full VCPU ID space
It is not currently possible to create the full number of possible VCPUs (KVM_MAX_VCPUS) on Power9 with KVM-HV when the guest uses fewer threads per core than its core stride (or "VSMT mode"). This is because the VCORE ID and XIVE offsets grow beyond KVM_MAX_VCPUS even though the VCPU ID is less than KVM_MAX_VCPU_ID. To address this, "pack" the VCORE ID and XIVE offsets by using knowledge of the way the VCPU IDs will be used when there are fewer guest threads per core than the core stride. The primary thread of each core will always be used first. Then, if the guest uses more than one thread per core, these secondary threads will sequentially follow the primary in each core. So, the only way an ID above KVM_MAX_VCPUS can be seen, is if the VCPUs are being spaced apart, so at least half of each core is empty, and IDs between KVM_MAX_VCPUS and (KVM_MAX_VCPUS * 2) can be mapped into the second half of each core (4..7, in an 8-thread core). Similarly, if IDs above KVM_MAX_VCPUS * 2 are seen, at least 3/4 of each core is being left empty, and we can map down into the second and third quarters of each core (2, 3 and 5, 6 in an 8-thread core). Lastly, if IDs above KVM_MAX_VCPUS * 4 are seen, only the primary threads are being used and 7/8 of the core is empty, allowing use of the 1, 5, 3 and 7 thread slots. (Strides less than 8 are handled similarly.) This allows the VCORE ID or offset to be calculated quickly from the VCPU ID or XIVE server numbers, without access to the VCPU structure. [paulus@ozlabs.org - tidied up comment a little, changed some WARN_ONCE to pr_devel, wrapped line, fixed id check.] Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> |
|
|
Ingo Molnar
|
ed7158bae4 |
treewide/trivial: Remove ';;$' typo noise
On lkml suggestions were made to split up such trivial typo fixes into per subsystem
patches:
--- a/arch/x86/boot/compressed/eboot.c
+++ b/arch/x86/boot/compressed/eboot.c
@@ -439,7 +439,7 @@ setup_uga32(void **uga_handle, unsigned long size, u32 *width, u32 *height)
struct efi_uga_draw_protocol *uga = NULL, *first_uga;
efi_guid_t uga_proto = EFI_UGA_PROTOCOL_GUID;
unsigned long nr_ugas;
- u32 *handles = (u32 *)uga_handle;;
+ u32 *handles = (u32 *)uga_handle;
efi_status_t status = EFI_INVALID_PARAMETER;
int i;
This patch is the result of the following script:
$ sed -i 's/;;$/;/g' $(git grep -E ';;$' | grep "\.[ch]:" | grep -vwE 'for|ia64' | cut -d: -f1 | sort | uniq)
... followed by manual review to make sure it's all good.
Splitting this up is just crazy talk, let's get over with this and just do it.
Reported-by: Pavel Machek <pavel@ucw.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
|
Linus Torvalds
|
15303ba5d1 |
KVM changes for 4.16
ARM:
- Include icache invalidation optimizations, improving VM startup time
- Support for forwarded level-triggered interrupts, improving
performance for timers and passthrough platform devices
- A small fix for power-management notifiers, and some cosmetic changes
PPC:
- Add MMIO emulation for vector loads and stores
- Allow HPT guests to run on a radix host on POWER9 v2.2 CPUs without
requiring the complex thread synchronization of older CPU versions
- Improve the handling of escalation interrupts with the XIVE interrupt
controller
- Support decrement register migration
- Various cleanups and bugfixes.
s390:
- Cornelia Huck passed maintainership to Janosch Frank
- Exitless interrupts for emulated devices
- Cleanup of cpuflag handling
- kvm_stat counter improvements
- VSIE improvements
- mm cleanup
x86:
- Hypervisor part of SEV
- UMIP, RDPID, and MSR_SMI_COUNT emulation
- Paravirtualized TLB shootdown using the new KVM_VCPU_PREEMPTED bit
- Allow guests to see TOPOEXT, GFNI, VAES, VPCLMULQDQ, and more AVX512
features
- Show vcpu id in its anonymous inode name
- Many fixes and cleanups
- Per-VCPU MSR bitmaps (already merged through x86/pti branch)
- Stable KVM clock when nesting on Hyper-V (merged through x86/hyperv)
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJafvMtAAoJEED/6hsPKofo6YcH/Rzf2RmshrWaC3q82yfIV0Qz
Z8N8yJHSaSdc3Jo6cmiVj0zelwAxdQcyjwlT7vxt5SL2yML+/Q0st9Hc3EgGGXPm
Il99eJEl+2MYpZgYZqV8ff3mHS5s5Jms+7BITAeh6Rgt+DyNbykEAvzt+MCHK9cP
xtsIZQlvRF7HIrpOlaRzOPp3sK2/MDZJ1RBE7wYItK3CUAmsHim/LVYKzZkRTij3
/9b4LP1yMMbziG+Yxt1o682EwJB5YIat6fmDG9uFeEVI5rWWN7WFubqs8gCjYy/p
FX+BjpOdgTRnX+1m9GIj0Jlc/HKMXryDfSZS07Zy4FbGEwSiI5SfKECub4mDhuE=
=C/uD
-----END PGP SIGNATURE-----
Merge tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Radim Krčmář:
"ARM:
- icache invalidation optimizations, improving VM startup time
- support for forwarded level-triggered interrupts, improving
performance for timers and passthrough platform devices
- a small fix for power-management notifiers, and some cosmetic
changes
PPC:
- add MMIO emulation for vector loads and stores
- allow HPT guests to run on a radix host on POWER9 v2.2 CPUs without
requiring the complex thread synchronization of older CPU versions
- improve the handling of escalation interrupts with the XIVE
interrupt controller
- support decrement register migration
- various cleanups and bugfixes.
s390:
- Cornelia Huck passed maintainership to Janosch Frank
- exitless interrupts for emulated devices
- cleanup of cpuflag handling
- kvm_stat counter improvements
- VSIE improvements
- mm cleanup
x86:
- hypervisor part of SEV
- UMIP, RDPID, and MSR_SMI_COUNT emulation
- paravirtualized TLB shootdown using the new KVM_VCPU_PREEMPTED bit
- allow guests to see TOPOEXT, GFNI, VAES, VPCLMULQDQ, and more
AVX512 features
- show vcpu id in its anonymous inode name
- many fixes and cleanups
- per-VCPU MSR bitmaps (already merged through x86/pti branch)
- stable KVM clock when nesting on Hyper-V (merged through
x86/hyperv)"
* tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (197 commits)
KVM: PPC: Book3S: Add MMIO emulation for VMX instructions
KVM: PPC: Book3S HV: Branch inside feature section
KVM: PPC: Book3S HV: Make HPT resizing work on POWER9
KVM: PPC: Book3S HV: Fix handling of secondary HPTEG in HPT resizing code
KVM: PPC: Book3S PR: Fix broken select due to misspelling
KVM: x86: don't forget vcpu_put() in kvm_arch_vcpu_ioctl_set_sregs()
KVM: PPC: Book3S PR: Fix svcpu copying with preemption enabled
KVM: PPC: Book3S HV: Drop locks before reading guest memory
kvm: x86: remove efer_reload entry in kvm_vcpu_stat
KVM: x86: AMD Processor Topology Information
x86/kvm/vmx: do not use vm-exit instruction length for fast MMIO when running nested
kvm: embed vcpu id to dentry of vcpu anon inode
kvm: Map PFN-type memory regions as writable (if possible)
x86/kvm: Make it compile on 32bit and with HYPYERVISOR_GUEST=n
KVM: arm/arm64: Fixup userspace irqchip static key optimization
KVM: arm/arm64: Fix userspace_irqchip_in_use counting
KVM: arm/arm64: Fix incorrect timer_is_pending logic
MAINTAINERS: update KVM/s390 maintainers
MAINTAINERS: add Halil as additional vfio-ccw maintainer
MAINTAINERS: add David as a reviewer for KVM/s390
...
|
|
|
Radim Krčmář
|
d2b9b2079e |
PPC KVM update for 4.16
- Allow HPT guests to run on a radix host on POWER9 v2.2 CPUs without requiring the complex thread synchronization that earlier CPU versions required. - A series from Ben Herrenschmidt to improve the handling of escalation interrupts with the XIVE interrupt controller. - Provide for the decrementer register to be copied across on migration. - Various minor cleanups and bugfixes. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJaYXViAAoJEJ2a6ncsY3GfDhgIAIDVBZH/Ftq7eJiUSxDpqyCQ DF/x7fNKzK/J33pu+3ntOI2gZsldExAy7vH2M27I4qLIkbI5y3vu4v8l3CDlS1LK 9dKi72zg7baozoVF5mGUNm0B1sSvZiIQlC/kaami2aPTF1GcrJ561GthzfZwxENX TSLqOA4LkeUZh2tUsvbcUrPi6v+E4Em2lgacQcx2ioMblWz56sZu79VsUbSSw/a3 P8+pIv7EbHw+TrOZMehjCbZkOdBeZ3IRLJsdlIAfe7y4vWME/5b9uVnQS/+XQj/B 6f3rQrduGvF2P6GMjsm8gDkgE5oZ1zbKlgO4i5WApnu80MMLFlfEUN+GWuGJ95Q= =OjGs -----END PGP SIGNATURE----- Merge tag 'kvm-ppc-next-4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc PPC KVM update for 4.16 - Allow HPT guests to run on a radix host on POWER9 v2.2 CPUs without requiring the complex thread synchronization that earlier CPU versions required. - A series from Ben Herrenschmidt to improve the handling of escalation interrupts with the XIVE interrupt controller. - Provide for the decrementer register to be copied across on migration. - Various minor cleanups and bugfixes. |
|
|
Linus Torvalds
|
40b9672a2f |
Merge branch 'work.whack-a-mole' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull asm/uaccess.h whack-a-mole from Al Viro: "It's linux/uaccess.h, damnit... Oh, well - eventually they'll stop cropping up..." * 'work.whack-a-mole' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: asm-prototypes.h: use linux/uaccess.h, not asm/uaccess.h riscv: use linux/uaccess.h, not asm/uaccess.h... ppc: for put_user() pull linux/uaccess.h, not asm/uaccess.h |
|
|
Benjamin Herrenschmidt
|
9b9b13a6d1 |
KVM: PPC: Book3S HV: Keep XIVE escalation interrupt masked unless ceded
This works on top of the single escalation support. When in single escalation, with this change, we will keep the escalation interrupt disabled unless the VCPU is in H_CEDE (idle). In any other case, we know the VCPU will be rescheduled and thus there is no need to take escalation interrupts in the host whenever a guest interrupt fires. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> |
|
|
Benjamin Herrenschmidt
|
2267ea7661 |
KVM: PPC: Book3S HV: Don't use existing "prodded" flag for XIVE escalations
The prodded flag is only cleared at the beginning of H_CEDE, so every time we have an escalation, we will cause the *next* H_CEDE to return immediately. Instead use a dedicated "irq_pending" flag to indicate that a guest interrupt is pending for the VCPU. We don't reuse the existing exception bitmap so as to avoid expensive atomic ops. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> |
|
|
Benjamin Herrenschmidt
|
bf4159da47 |
KVM: PPC: Book3S HV: Enable use of the new XIVE "single escalation" feature
That feature, provided by Power9 DD2.0 and later, when supported by newer OPAL versions, allows us to sacrifice a queue (priority 7) in favor of merging all the escalation interrupts of the queues of a single VP into a single interrupt. This reduces the number of host interrupts used up by KVM guests especially when those guests use multiple priorities. It will also enable a future change to control the masking of the escalation interrupts more precisely to avoid spurious ones. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> |
|
|
Benjamin Herrenschmidt
|
c424c10823 |
KVM: PPC: Book3S HV: Add more info about XIVE queues in debugfs
Add details about enabled queues and escalation interrupts. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> |
|
|
Laurent Vivier
|
7333b5aca4 |
KVM: PPC: Book3S HV: Fix pending_pri value in kvmppc_xive_get_icp()
When we migrate a VM from a POWER8 host (XICS) to a POWER9 host
(XICS-on-XIVE), we have an error:
qemu-kvm: Unable to restore KVM interrupt controller state \
(0xff000000) for CPU 0: Invalid argument
This is because kvmppc_xics_set_icp() checks the new state
is internaly consistent, and especially:
...
1129 if (xisr == 0) {
1130 if (pending_pri != 0xff)
1131 return -EINVAL;
...
On the other side, kvmppc_xive_get_icp() doesn't set
neither the pending_pri value, nor the xisr value (set to 0)
(and kvmppc_xive_set_icp() ignores the pending_pri value)
As xisr is 0, pending_pri must be set to 0xff.
Fixes:
|
|
|
Cédric Le Goater
|
dc1c4165d1 |
KVM: PPC: Book3S: fix XIVE migration of pending interrupts
When restoring a pending interrupt, we are setting the Q bit to force
a retrigger in xive_finish_unmask(). But we also need to force an EOI
in this case to reach the same initial state : P=1, Q=0.
This can be done by not setting 'old_p' for pending interrupts which
will inform xive_finish_unmask() that an EOI needs to be sent.
Fixes:
|
|
|
Al Viro
|
5bb866de17 |
ppc: for put_user() pull linux/uaccess.h, not asm/uaccess.h
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
|
|
Sam Bobroff
|
2fb1e94645 |
KVM: PPC: Book3S: Fix server always zero from kvmppc_xive_get_xive()
In KVM's XICS-on-XIVE emulation, kvmppc_xive_get_xive() returns the
value of state->guest_server as "server". However, this value is not
set by it's counterpart kvmppc_xive_set_xive(). When the guest uses
this interface to migrate interrupts away from a CPU that is going
offline, it sees all interrupts as belonging to CPU 0, so they are
left assigned to (now) offline CPUs.
This patch removes the guest_server field from the state, and returns
act_server in it's place (that is, the CPU actually handling the
interrupt, which may differ from the one requested).
Fixes:
|
|
|
Benjamin Herrenschmidt
|
d222af0723 |
KVM: PPC: Book3S HV: Don't access XIVE PIPR register using byte accesses
The XIVE interrupt controller on POWER9 machines doesn't support byte
accesses to any register in the thread management area other than the
CPPR (current processor priority register). In particular, when
reading the PIPR (pending interrupt priority register), we need to
do a 32-bit or 64-bit load.
Cc: stable@vger.kernel.org # v4.13
Fixes:
|
|
|
Paul Mackerras
|
00c14757f6 |
KVM: PPC: Book3S: Fix typo in XICS-on-XIVE state saving code
This fixes a typo where the wrong loop index was used to index
the kvmppc_xive_vcpu.queues[] array in xive_pre_save_scan().
The variable i contains the vcpu number; we need to index queues[]
using j, which iterates from 0 to KVMPPC_XIVE_Q_COUNT-1.
The effect of this bug is that things that save the interrupt
controller state, such as "virsh dump", on a VM with more than
8 vCPUs, result in xive_pre_save_queue() getting called on a
bogus queue structure, usually resulting in a crash like this:
[ 501.821107] Unable to handle kernel paging request for data at address 0x00000084
[ 501.821212] Faulting instruction address: 0xc008000004c7c6f8
[ 501.821234] Oops: Kernel access of bad area, sig: 11 [#1]
[ 501.821305] SMP NR_CPUS=1024
[ 501.821307] NUMA
[ 501.821376] PowerNV
[ 501.821470] Modules linked in: vhost_net vhost tap xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_mangle ip6table_security ip6table_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack libcrc32c iptable_mangle iptable_security iptable_raw ebtable_filter ebtables ip6table_filter ip6_tables ses enclosure scsi_transport_sas ipmi_powernv ipmi_devintf ipmi_msghandler powernv_op_panel kvm_hv nfsd auth_rpcgss oid_registry nfs_acl lockd grace sunrpc kvm tg3 ptp pps_core
[ 501.822477] CPU: 3 PID: 3934 Comm: live_migration Not tainted 4.11.0-4.git8caa70f.el7.centos.ppc64le #1
[ 501.822633] task: c0000003f9e3ae80 task.stack: c0000003f9ed4000
[ 501.822745] NIP: c008000004c7c6f8 LR: c008000004c7c628 CTR: 0000000030058018
[ 501.822877] REGS: c0000003f9ed7980 TRAP: 0300 Not tainted (4.11.0-4.git8caa70f.el7.centos.ppc64le)
[ 501.823030] MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE>
[ 501.823047] CR: 28022244 XER: 00000000
[ 501.823203] CFAR: c008000004c7c77c DAR: 0000000000000084 DSISR: 40000000 SOFTE: 1
[ 501.823203] GPR00: c008000004c7c628 c0000003f9ed7c00 c008000004c91450 00000000000000ff
[ 501.823203] GPR04: c0000003f5580000 c0000003f559bf98 9000000000009033 0000000000000000
[ 501.823203] GPR08: 0000000000000084 0000000000000000 00000000000001e0 9000000000001003
[ 501.823203] GPR12: c00000000008a7d0 c00000000fdc1b00 000000000a9a0000 0000000000000000
[ 501.823203] GPR16: 00000000402954e8 000000000a9a0000 0000000000000004 0000000000000000
[ 501.823203] GPR20: 0000000000000008 c000000002e8f180 c000000002e8f1e0 0000000000000001
[ 501.823203] GPR24: 0000000000000008 c0000003f5580008 c0000003f4564018 c000000002e8f1e8
[ 501.823203] GPR28: 00003ff6e58bdc28 c0000003f4564000 0000000000000000 0000000000000000
[ 501.825441] NIP [c008000004c7c6f8] xive_get_attr+0x3b8/0x5b0 [kvm]
[ 501.825671] LR [c008000004c7c628] xive_get_attr+0x2e8/0x5b0 [kvm]
[ 501.825887] Call Trace:
[ 501.825991] [c0000003f9ed7c00] [c008000004c7c628] xive_get_attr+0x2e8/0x5b0 [kvm] (unreliable)
[ 501.826312] [c0000003f9ed7cd0] [c008000004c62ec4] kvm_device_ioctl_attr+0x64/0xa0 [kvm]
[ 501.826581] [c0000003f9ed7d20] [c008000004c62fcc] kvm_device_ioctl+0xcc/0xf0 [kvm]
[ 501.826843] [c0000003f9ed7d40] [c000000000350c70] do_vfs_ioctl+0xd0/0x8c0
[ 501.827060] [c0000003f9ed7de0] [c000000000351534] SyS_ioctl+0xd4/0xf0
[ 501.827282] [c0000003f9ed7e30] [c00000000000b8e0] system_call+0x38/0xfc
[ 501.827496] Instruction dump:
[ 501.827632] 419e0078 3b760008 e9160008 83fb000c 83db0010 80fb0008 2f280000 60000000
[ 501.827901] 60000000 60420000 419a0050 7be91764 <7d284c2c> 552a0ffe 7f8af040 419e003c
[ 501.828176] ---[ end trace 2d0529a5bbbbafed ]---
Cc: stable@vger.kernel.org
Fixes:
|
|
|
Paolo Bonzini
|
4415b33528 |
Merge branch 'kvm-ppc-next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD
The main thing here is a new implementation of the in-kernel XICS interrupt controller emulation for POWER9 machines, from Ben Herrenschmidt. POWER9 has a new interrupt controller called XIVE (eXternal Interrupt Virtualization Engine) which is able to deliver interrupts directly to guest virtual CPUs in hardware without hypervisor intervention. With this new code, the guest still sees the old XICS interface but performance is better because the XICS emulation in the host uses the XIVE directly rather than going through a XICS emulation in firmware. Conflicts: arch/powerpc/kernel/cpu_setup_power.S [cherry-picked fix] arch/powerpc/kvm/book3s_xive.c [include asm/debugfs.h] |
|
|
Benjamin Herrenschmidt
|
5af5099385 |
KVM: PPC: Book3S HV: Native usage of the XIVE interrupt controller
This patch makes KVM capable of using the XIVE interrupt controller to provide the standard PAPR "XICS" style hypercalls. It is necessary for proper operations when the host uses XIVE natively. This has been lightly tested on an actual system, including PCI pass-through with a TG3 device. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Cleanup pr_xxx(), unsplit pr_xxx() strings, etc., fix build failures by adding KVM_XIVE which depends on KVM_XICS and XIVE, and adding empty stubs for the kvm_xive_xxx() routines, fixup subject, integrate fixes from Paul for building PR=y HV=n] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> |