In 'dma_pool_create()', we return -ENOMEM, but don't release the resources
already allocated, as in all the other error handling paths.
Go to 'err_res_free' instead of returning directly.
Fixes: 0177947397 ("dmaengine: ti: k3-udma: Initial support for K3 BCDMA")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20210124070923.724479-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The UDMA and BCDMA can provide higher throughput if the burst_size of the
channel is changed from it's default (which is 64 bytes) for Ultra-high
and high capacity channels.
This performance benefit is even more visible when the buffers are aligned
with the burst_size configuration.
The am654 does not have a way to change the burst size, but it is using
64 bytes burst, so increasing the copy_align from 8 bytes to 64 (and
clients taking that into account) can increase the throughput as well.
Numbers gathered on j721e:
echo 8000000 > /sys/module/dmatest/parameters/test_buf_size
echo 2000 > /sys/module/dmatest/parameters/timeout
echo 50 > /sys/module/dmatest/parameters/iterations
echo 1 > /sys/module/dmatest/parameters/max_channels
Prior this patch: ~1.3 GB/s
After this patch: ~1.8 GB/s
with 1 byte alignment: ~1.7 GB/s
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20210113114923.9231-3-peter.ujfalusi@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
BCDMA RX channels have one flow per channel, therefore set the rflow_cnt
to rchan_cnt.
Without this patch, request for BCDMA RX channel allocation fails as
rflow_cnt is 0 thus fails to reserve a rflow for the channel.
Fixes: 8844898028 ("dmaengine: ti: k3-udma: Add support for BCDMA channel TPL handling")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20210112141403.30286-1-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Instead of initializing the rchan_tpl the initial commit re-initialized
the tchan_tpl.
Fixes: d2abc98233 ("dmaengine: ti: k3-udma: Initial support for K3 PKTDMA")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20201216154833.20821-1-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
New drivers/devices
- Qualcomm ADM driver
- Qualcomm GPI driver
- Allwinner A100 DMA support
- Microchip Sama7g5 support
- Mediatek MT8516 apdma
- Updates:
- more updates to idxd driver and support for IAX config
- runtime PM support for dw driver
- TI keystone drivers for 5.11 included here due to dependency for TI
drivers
-----BEGIN PGP SIGNATURE-----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=uNBn
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"The last dmaengine updates for this year :)
This contains couple of new drivers, new device support and updates to
bunch of drivers.
New drivers/devices:
- Qualcomm ADM driver
- Qualcomm GPI driver
- Allwinner A100 DMA support
- Microchip Sama7g5 support
- Mediatek MT8516 apdma
Updates:
- more updates to idxd driver and support for IAX config
- runtime PM support for dw driver
- TI drivers"
* tag 'dmaengine-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (75 commits)
soc: ti: k3-ringacc: Use correct error casting in k3_ringacc_dmarings_init
dmaengine: ti: k3-udma-glue: Add support for K3 PKTDMA
dmaengine: ti: k3-udma: Initial support for K3 PKTDMA
dmaengine: ti: k3-udma: Add support for BCDMA channel TPL handling
dmaengine: ti: k3-udma: Initial support for K3 BCDMA
soc: ti: k3-ringacc: add AM64 DMA rings support.
dmaengine: ti: Add support for k3 event routers
dmaengine: ti: k3-psil: Add initial map for AM64
dmaengine: ti: k3-psil: Extend psil_endpoint_config for K3 PKTDMA
dt-bindings: dma: ti: Add document for K3 PKTDMA
dt-bindings: dma: ti: Add document for K3 BCDMA
dmaengine: dmatest: Use dmaengine_get_dma_device
dmaengine: doc: client: Update for dmaengine_get_dma_device() usage
dmaengine: Add support for per channel coherency handling
dmaengine: of-dma: Add support for optional router configuration callback
dmaengine: ti: k3-udma-glue: Configure the dma_dev for rings
dmaengine: ti: k3-udma-glue: Get the ringacc from udma_dev
dmaengine: ti: k3-udma-glue: Add function to get device pointer for DMA API
dmaengine: ti: k3-udma: Add support for second resource range from sysfw
dmaengine: ti: k3-udma: Wait for peer teardown completion if supported
...
This commit adds support for PKTDMA in k3-udma glue driver. Use new
psil_endpoint_config struct to get static data for a given channel or a
flow during setup. Make sure that the RX flows being mapped to a RX
channel is within the range of flows that is been allocated to that RX
channel.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20201208090440.31792-21-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
One of the DMAs introduced with AM64 is the Packet DMA (PKTDMA).
It serves similar purpose as K3 UDMAP channels in packet mode, but with
notable differences, like tflow support and channels being allocated to
service specific peripherals.
The rings for the PKTDMA is integrated within the DMA itself instead of
using rings from the general purpose ringacc.
PKTDMA can be used to service PSI-L peripherals, similarly to
K3 UDMA channels.
Most of the driver code can be reused for PKTDMA tchan/rchan support but
new setup and allocation functions are needed to handle the differences
between the DMAs.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20201208090440.31792-20-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Unlike UDMAP the BCDMA defines the channel TPL levels per channel type.
In UDMAP the number of high and ultra-high channels applies to both tchan
and rchan.
BCDMA defines the TPL per channel types: bchan, tchan and rchan can have
different number of high and ultra-high channels.
In order to support BCDMA channel TPL we need to move the tpl information
as per channel type property for the DMAs.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20201208090440.31792-19-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
One of the DMAs introduced with AM64 is the Block Copy DMA (BCDMA).
It serves similar purpose as K3 UDMAP channels in TR mode.
The rings for the BCDMA is integrated within the DMA itself instead of
using rings from the general purpose ringacc.
A BCDMA have two different type of channels:
- Block Copy Channels (bchan)
- Split Channels (tchan and rchan)
tchan and rchan can be used to service PSI-L peripherals, similarly to
K3 UDMA channels.
bchan can be only used for block copy operation (TR type15) like the
paired K3 UDMA tchan/rchan configured in block copy mode.
bchans can be also used to service peripherals directly if an external
trigger is selected for the channel.
Most of the driver code can be reused for BCDMA bchan/tchan/rchan support
but new setup and allocation functions are needed to handle the
differences between the DMAs.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20201208090440.31792-18-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Rings in RING mode should be using the DMA device for DMA API as in this
mode the ringacc will not access the ring memory in any ways, but the DMA
is.
Fix up the ring configuration and set the dma_dev unconditionally and let
the ringacc driver to select the correct device to use for DMA API.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20201208090440.31792-7-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
If of_xudma_dev_get() returns with the valid udma_dev then the driver
already got the ringacc, there is no need to execute
of_k3_ringacc_get_by_phandle() for each channel via the glue layer.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20201208090440.31792-6-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Glue layer users should use the device of the DMA for DMA mapping and
allocations as it is the DMA which accesses to descriptors and buffers,
not the clients
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20201208090440.31792-5-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Resource allocation via sysfw can use up to two ranges per resource subtype
to support more complex resource assignment, mainly for DMA channels.
Take the second range also into consideration when setting up the maps for
available resources.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20201208090440.31792-4-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Set the TDTYPE if it is supported on the platform (j721e) which will cause
UDMAP to wait for the remote peer to finish the teardown before returning
the teardown completed message.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20201208090440.31792-3-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
According to different sections of the TRM, the hchan_cnt of CAP3 includes
the number of uchan in UDMA, thus the start offset of the normal channels
are hchan_cnt.
Fixes: daf4ad0499 ("dmaengine: ti: k3-udma: Query throughput level information from hardware")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20201208090440.31792-2-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver can match only via the DT table so the main table should be
always used and the of_match_ptr does not have any sense (this also
allows ACPI matching via PRP0001, even though it is not relevant here).
The secondary match of_device_id tables (passed to of_match_node) should
be marked as maybe unused to fix compile testing (!CONFIG_OF on x86_64)
warnings:
drivers/dma/ti/dma-crossbar.c:125:34: warning:
‘ti_am335x_master_match’ defined but not used [-Wunused-const-variable=]
drivers/dma/ti/dma-crossbar.c:22:34: warning:
‘ti_dma_xbar_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201120162303.482126-6-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
We now use cpu_pm for saving and restoring device context for deeper SoC
idle states. But for omap3, we must also block idle if SDMA is busy.
If we don't block idle when SDMA is busy, we eventually end up saving and
restoring SDMA register state on PER domain idle while SDMA is active and
that causes at least audio playback to fail.
Fixes: 4c74ecf792 ("dmaengine: ti: omap-dma: Add device tree match data and use it for cpu_pm")
Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20201109154013.11950-1-tony@atomide.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Running in hardIRQ, disabling IRQ is redundant since hardIRQ has disabled
IRQ. This patch removes the irqsave and irqstore to save some instruction
cycles.
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20201027215252.25820-3-song.bao.hua@hisilicon.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The NAVSS UDMA will stuck if target IP module is disabled by PM while PSI-L
threads are paired UDMA<->IP and no further transfers is possible. This
could be the case for IPs J721E Main CPSW (cpsw9g).
Hence, to avoid such situation do PSI-L threads pairing only when UDMA
channel is going to be enabled as at this time DMA consumer module expected
to be active already.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20201030203000.4281-1-grygorii.strashko@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
gcc warns about a mismatch argument type when passing
'false' into a function that expects an enum:
drivers/dma/ti/k3-udma-private.c: In function 'xudma_tchan_get':
drivers/dma/ti/k3-udma-private.c:86:34: warning: implicit conversion from 'enum <anonymous>' to 'enum udma_tp_level' [-Wenum-conversion]
86 | return __udma_reserve_##res(ud, false, id); \
| ^~~~~
drivers/dma/ti/k3-udma-private.c:95:1: note: in expansion of macro 'XUDMA_GET_PUT_RESOURCE'
95 | XUDMA_GET_PUT_RESOURCE(tchan);
| ^~~~~~~~~~~~~~~~~~~~~~
In this case, false has the same numerical value as
UDMA_TP_NORMAL, so passing that is most likely the correct
way to avoid the warning without changing the behavior.
Fixes: d702419134 ("dmaengine: ti: k3-udma: Add glue layer for non DMAengine users")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20201026160123.3704531-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Various driver updates for platforms. A bulk of this is smaller fixes or
cleanups, but some of the new material this time around is:
- Support for Nvidia Tegra234 SoC
- Ring accelerator support for TI AM65x
- PRUSS driver for TI platforms
- Renesas support for R-Car V3U SoC
- Reset support for Cortex-M4 processor on i.MX8MQ
There are also new socinfo entries for a handful of different SoCs
and platforms.
-----BEGIN PGP SIGNATURE-----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=tfPb
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC-related driver updates from Olof Johansson:
"Various driver updates for platforms. A bulk of this is smaller fixes
or cleanups, but some of the new material this time around is:
- Support for Nvidia Tegra234 SoC
- Ring accelerator support for TI AM65x
- PRUSS driver for TI platforms
- Renesas support for R-Car V3U SoC
- Reset support for Cortex-M4 processor on i.MX8MQ
There are also new socinfo entries for a handful of different SoCs and
platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits)
drm/mediatek: reduce clear event
soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api
soc: mediatek: cmdq: add jump function
soc: mediatek: cmdq: add write_s_mask value function
soc: mediatek: cmdq: add write_s value function
soc: mediatek: cmdq: add read_s function
soc: mediatek: cmdq: add write_s_mask function
soc: mediatek: cmdq: add write_s function
soc: mediatek: cmdq: add address shift in jump
soc: mediatek: mtk-infracfg: Fix kerneldoc
soc: amlogic: pm-domains: use always-on flag
reset: sti: reset-syscfg: fix struct description warnings
reset: imx7: add the cm4 reset for i.MX8MQ
dt-bindings: reset: imx8mq: add m4 reset
reset: Fix and extend kerneldoc
reset: reset-zynqmp: Added support for Versal platform
dt-bindings: reset: Updated binding for Versal reset driver
reset: imx7: Support module build
soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk
soc: fsl: qman: convert to use be32_add_cpu()
...
Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200921093701.102208-1-zhangqilong3@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Now the K3 UDMA glue layer enable functions perform RMW operation on UDMA
RX/TX RT_CTL registers to set EN bit and enable channel, which is
incorrect, because only EN bit has to be set in those registers to enable
channel (all other bits should be cleared 0).
More over, this causes issues when bootloader leaves UDMA channel RX/TX
RT_CTL registers in incorrect state - TDOWN bit set, for example. As
result, UDMA channel will just perform teardown right after it's enabled.
Hence, fix it by writing correct values (EN=1) directly in UDMA channel
RX/TX RT_CTL registers in k3_udma_glue_enable_tx/rx_chn() functions.
Fixes: d702419134 ("dmaengine: ti: k3-udma: Add glue layer for non DMAengine users")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200916120955.7963-1-grygorii.strashko@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200831103542.305571-36-allen.lkml@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The original commit mixed up the forward and completion ring IDs for the
rx flow configuration.
Acked-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Fixes: 4927b1ab20 ("dmaengine: ti: k3-udma: Switch to k3_ringacc_request_rings_pair")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Use separate data for SoC dependent parameters. These parameters depends
on the DMA integration (either in HW or in SYSFW), the DMA controller
itself remains compatible with either the am654 or j721e variant.
j7200 have the same DMA as j721e with different number of channels, which
can be queried from HW, but SYSFW defines different rchan_oes_offset
number for j7200 (0x80) compared to j721e (0x400).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200910124329.21206-1-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
SYSFW ABI 3.0 has changed the rchan_oes_offset value for am654 to support
SR2.
Since the kernel now needs SYSFW API 3.0 to work because the merged irqchip
update, we need to also update the am654 rchan_oes_offset.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200831091019.25273-1-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The direction has been already validated in the main callback and there is
no need to check it again in the TR mode handlers for slave_sg and cyclic.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200824120120.9270-1-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The TR which needs to be initialized for the next sg entry is indexed by
tr_idx and not by the running i counter.
In case any sub element in the SG needs more than one TR, the code would
corrupt an already configured TR.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200824120108.9178-1-peter.ujfalusi@ti.com
Fixes: 6cf668a4ef ("dmaengine: ti: k3-udma: Use the TR counter helper for slave_sg and cyclic")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The security accelerator within MCU domain supports two ports similarly
to the SA2UL in MAIN domain.
Add endpoint configuration for the two ingress and one egress threads of
the second port.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200803100724.19003-1-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add new PSI-L map file for the new TI j7200 SoC.
The DMA hardware in j7200 is the same as in j721e with different
set of peripherals resulting different PSI-L thread map compered
to j721e.
See J7200 Technical Reference Manual (SPRUIU1, June 2020)
for further details: https://www.ti.com/lit/pdf/spruiu1
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200803125713.17829-3-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Instead of separate of_machine_is_compatible() it is better to use
soc_device_match() and soc_device_attribute struct to get the PSI-L map
for the booted device.
By using soc_device_match() it is easier to add support for new devices.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200803125713.17829-2-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The of_device_id is included unconditionally by of.h header and used
in the driver as well. Remove of_match_ptr to fix W=1 compile test
warning with !CONFIG_OF:
drivers/dma/ti/omap-dma.c:1892:34: warning: 'omap_dma_match' defined but not used [-Wunused-const-variable=]
1892 | static const struct of_device_id omap_dma_match[] = {
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20200728170939.28278-1-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Core:
- Support out of order dma completion
- Support for repeating transaction
New controllers:
- Support for Actions S700 DMA engine
- Renesas R8A774E1, r8a7742 controller binding
- New driver for Xilinx DPDMA controller
Others:
- Support of out of order dma completion in idxd driver
- W=1 warning cleanup of subsystem
- Updates to ti-k3-dma, dw, idxd drivers
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAl8s6voACgkQfBQHDyUj
g0f7Aw/+NjqyWAMZ4WpP6p2AN+5Evs7MY0fhhJMkU7ShbQlBM1GKrrNpMhaOaMw2
KB7xWvsfMnpKhxcq5LL2ymMnzJgJHVi0Zp9aRwNQXmJfHyCTDoqv54ljd5ADaL/O
XLBLBWc6h5WbAsWmpiovb/EQ58RAU/bvlPD7gntK9Y8n5ha32c+jFnOg+Fd3uINl
x9uSHKUOWFVRvIJgOrFcFwl2eT0erFcme7WyCWuNfSFDZlJqOdfVf1TfTVcfyAYY
8r6VWPOyiAc97SPN1hVYMUqqTtRAEDlsPRfeyvUm2pnRJnbyJdHbvbA0l/OMvzH5
3q5SBXz6NgoZsO6GPiSEV679K0nsuZOCqfevNb6+UQUrO7f5JyEbwGTrWju6F3fg
UVTENto8XW7KCE+oTkJBgZ6utbDtK5dpoKghX59lN3nKogqzGi3JUlgTtlSIF+AY
CnmESWM37f1jw1Ew58gmSYRFfKQV2fLwcAePnaV4HaNV70uFoYnhPvVenSvgYeky
24D8O5fzzhRHsSqUPTLTZ/u4cGJtOiBzQWdWcUXig/mfHKpu9i4nejHmuA2x64l0
oFc3nKwd7XrGVg2l4XMx1T0x69+1dlc0eEkZ7lRGzZgDCMKeHEsLOBGaid+bMO09
4IMzxoQxINui6l8csX5ctbRdXfUFZKZaZU36RxQeysidLE6QDGk=
=OfZv
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"Core:
- Support out of order dma completion
- Support for repeating transaction
New controllers:
- Support for Actions S700 DMA engine
- Renesas R8A774E1, r8a7742 controller binding
- New driver for Xilinx DPDMA controller
Other:
- Support of out of order dma completion in idxd driver
- W=1 warning cleanup of subsystem
- Updates to ti-k3-dma, dw, idxd drivers"
* tag 'dmaengine-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (68 commits)
dmaengine: dw: Don't include unneeded header to platform data header
dmaengine: Actions: Add support for S700 DMA engine
dmaengine: Actions: get rid of bit fields from dma descriptor
dt-bindings: dmaengine: convert Actions Semi Owl SoCs bindings to yaml
dmaengine: idxd: add missing invalid flags field to completion
dmaengine: dw: Initialize max_sg_burst capability
dmaengine: dw: Introduce max burst length hw config
dmaengine: dw: Initialize min and max burst DMA device capability
dmaengine: dw: Set DMA device max segment size parameter
dmaengine: dw: Take HC_LLP flag into account for noLLP auto-config
dmaengine: Introduce DMA-device device_caps callback
dmaengine: Introduce max SG burst capability
dmaengine: Introduce min burst length capability
dt-bindings: dma: dw: Add max burst transaction length property
dt-bindings: dma: dw: Convert DW DMAC to DT binding
dmaengine: ti: k3-udma: Query throughput level information from hardware
dmaengine: ti: k3-udma: Use defines for capabilities register parsing
dmaengine: xilinx: dpdma: Fix kerneldoc warning
dmaengine: xilinx: dpdma: add missing kernel doc
dmaengine: xilinx: dpdma: remove comparison of unsigned expression
...
A couple of subsystems have their own subsystem maintainers but choose
to have the code merged through the soc tree as upstream, as the code
tends to be used across multiple SoCs or has SoC specific drivers itself:
- memory controllers:
Krzysztof Kozlowski takes ownership of the drivers/memory
subsystem and its drivers, starting out with a set of cleanup
patches.
A larger driver for the Tegra memory controller that was accidentally
missed for v5.8 is now added.
- reset controllers:
Only minor updates to drivers/reset this time
- firmware:
The "turris mox" firmware driver gains support for signed firmware blobs
The tegra firmware driver gets extended to export some debug information
Various updates to i.MX firmware drivers, mostly cosmetic
- ARM SCMI/SCPI:
A new mechanism for platform notifications is added, among a number
of minor changes.
- optee:
Probing of the TEE bus is rewritten to better support detection of
devices that depend on the tee-supplicant user space.
A new firmware based trusted platform module (fTPM) driver is added
based on OP-TEE
- SoC attributes:
A new driver is added to provide a generic soc_device for identifying
a machine through the SMCCC ARCH_SOC_ID firmware interface rather than
by probing SoC family specific registers.
The series also contains some cleanups to the common soc_device code.
There are also a number of updates to SoC specific drivers,
the main ones are:
- Mediatek cmdq driver gains a few in-kernel interfaces
- Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding
support for additional SoC variants
- The Qualcomm GENI core code gains interconnect path voting and
performance level support, and integrating this into a number of
device drivers.
- A new driver for Samsung Exynos5800 voltage coupler for
- Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC
specific device drivers
- Updates to the TI K3 Ring Accelerator driver
-----BEGIN PGP SIGNATURE-----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=nezz
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"A couple of subsystems have their own subsystem maintainers but choose
to have the code merged through the soc tree as upstream, as the code
tends to be used across multiple SoCs or has SoC specific drivers
itself:
- memory controllers:
Krzysztof Kozlowski takes ownership of the drivers/memory subsystem
and its drivers, starting out with a set of cleanup patches.
A larger driver for the Tegra memory controller that was
accidentally missed for v5.8 is now added.
- reset controllers:
Only minor updates to drivers/reset this time
- firmware:
The "turris mox" firmware driver gains support for signed firmware
blobs The tegra firmware driver gets extended to export some debug
information Various updates to i.MX firmware drivers, mostly
cosmetic
- ARM SCMI/SCPI:
A new mechanism for platform notifications is added, among a number
of minor changes.
- optee:
Probing of the TEE bus is rewritten to better support detection of
devices that depend on the tee-supplicant user space. A new
firmware based trusted platform module (fTPM) driver is added based
on OP-TEE
- SoC attributes:
A new driver is added to provide a generic soc_device for
identifying a machine through the SMCCC ARCH_SOC_ID firmware
interface rather than by probing SoC family specific registers.
The series also contains some cleanups to the common soc_device
code.
There are also a number of updates to SoC specific drivers, the main
ones are:
- Mediatek cmdq driver gains a few in-kernel interfaces
- Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding
support for additional SoC variants
- The Qualcomm GENI core code gains interconnect path voting and
performance level support, and integrating this into a number of
device drivers.
- A new driver for Samsung Exynos5800 voltage coupler for
- Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC
specific device drivers
- Updates to the TI K3 Ring Accelerator driver"
* tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (164 commits)
soc: qcom: geni: Fix unused label warning
soc: qcom: smd-rpm: Fix kerneldoc
memory: jz4780_nemc: Only request IO memory the driver will use
soc: qcom: pdr: Reorder the PD state indication ack
MAINTAINERS: Add Git repository for memory controller drivers
memory: brcmstb_dpfe: Fix language typo
memory: samsung: exynos5422-dmc: Correct white space issues
memory: samsung: exynos-srom: Correct alignment
memory: pl172: Enclose macro argument usage in parenthesis
memory: of: Correct kerneldoc
memory: omap-gpmc: Fix language typo
memory: omap-gpmc: Correct white space issues
memory: omap-gpmc: Use 'unsigned int' for consistency
memory: omap-gpmc: Enclose macro argument usage in parenthesis
memory: omap-gpmc: Correct kerneldoc
memory: mvebu-devbus: Align with open parenthesis
memory: mvebu-devbus: Add missing braces to all arms of if statement
memory: bt1-l2-ctl: Add blank lines after declarations
soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static
firmware: ti_sci: Replace HTTP links with HTTPS ones
...
- TI K3 Ring Accelerator updates
- Few non critical warining fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Y8Sq
-----END PGP SIGNATURE-----
Merge tag 'drivers_soc_for_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/drivers
SOC: TI Keystone driver update for v5.9
- TI K3 Ring Accelerator updates
- Few non critical warining fixes
* tag 'drivers_soc_for_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static
firmware: ti_sci: Replace HTTP links with HTTPS ones
soc: ti/ti_sci_protocol.h: drop a duplicated word + clarify
soc: ti: k3: fix semicolon.cocci warnings
soc: ti: k3-ringacc: fix: warn: variable dereferenced before check 'ring'
dmaengine: ti: k3-udma: Switch to k3_ringacc_request_rings_pair
soc: ti: k3-ringacc: separate soc specific initialization
soc: ti: k3-ringacc: add request pair of rings api.
soc: ti: k3-ringacc: add ring's flags to dump
soc: ti: k3-ringacc: Move state tracking variables under a struct
dt-bindings: soc: ti: k3-ringacc: convert bindings to json-schema
Link: https://lore.kernel.org/r/1595711814-7015-1-git-send-email-santosh.shilimkar@oracle.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The CAP3 register contains information about the number of
HCHAN (High Capacity) and UCHAN (Ultra High Capacity) channels in UDMAP.
Based on this information the start indexes of the levels can be calculated
without a need of a table in the match data.
On am654 the CAP3 does not contain information about the number different
channels. Set up the tpl information based on the available documentation.
This change will allow to use the same compatible for different SoCs where
the only difference is the number of channel types.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200717120903.8774-3-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
We only request ring pairs via K3 DMA driver, switch to use the new
k3_ringacc_request_rings_pair() to simplify the code.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Addresses-KSPP-ID: https://github.com/KSPP/linux/issues/83
Link: https://lore.kernel.org/r/20200619224334.GA7857@embeddedor
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Move the uc->tchan/rchan checks to the IO wrappers itself instead of
calling the functions with tchan/rchan directly.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20200707102352.28773-6-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Instead of using higher level wrappers (udma_rchanrt/tchanrt read/write),
use the underlying register access functions directly.
This will allow changes in the higher level wrappers within the DMAengine
driver.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20200707102352.28773-5-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The register offsets and functions are the same among TCHAN and RCHAN.
Use generic, common names for them.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20200707102352.28773-4-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Linus Torvalds