Introduce types and configs for bpf programs that can be attached to
LSM hooks. The programs can be enabled by the config option
CONFIG_BPF_LSM.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: Florent Revest <revest@google.com>
Reviewed-by: Thomas Garnier <thgarnie@google.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Link: https://lore.kernel.org/bpf/20200329004356.27286-2-kpsingh@chromium.org
This adds a test to exercise the new bpf_map__set_initial_value() function.
The test simply overrides the global data section with all zeroes, and
checks that the new value makes it into the kernel map on load.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200329132253.232541-2-toke@redhat.com
For internal maps (most notably the maps backing global variables), libbpf
uses an internal mmaped area to store the data after opening the object.
This data is subsequently copied into the kernel map when the object is
loaded.
This adds a function to set a new value for that data, which can be used to
before it is loaded into the kernel. This is especially relevant for RODATA
maps, since those are frozen on load.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200329132253.232541-1-toke@redhat.com
This adds a new function to set the XDP fd while specifying the FD of the
program to replace, using the newly added IFLA_XDP_EXPECTED_FD netlink
parameter. The new function uses the opts struct mechanism to be extendable
in the future.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158515700857.92963.7052131201257841700.stgit@toke.dk
Fix a sharp edge in xsk_umem__create and xsk_socket__create. Almost all of
the members of the ring buffer structs are initialized, but the "cached_xxx"
variables are not all initialized. The caller is required to zero them.
This is needlessly dangerous. The results if you don't do it can be very bad.
For example, they can cause xsk_prod_nb_free and xsk_cons_nb_avail to return
values greater than the size of the queue. xsk_ring_cons__peek can return an
index that does not refer to an item that has been queued.
I have confirmed that without this change, my program misbehaves unless I
memset the ring buffers to zero before calling the function. Afterwards,
my program works without (or with) the memset.
Signed-off-by: Fletcher Dunn <fletcherd@valvesoftware.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/85f12913cde94b19bfcb598344701c38@valvesoftware.com
it's not really different from e.g. __sanitizer_cov_trace_cmp4();
as it is, the switches that generate an array of labels get
rejected by objtool, while slightly different set of cases
that gets compiled into a series of comparisons is accepted.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Enable the bpf_get_current_cgroup_id() helper for connect(), sendmsg(),
recvmsg() and bind-related hooks in order to retrieve the cgroup v2
context which can then be used as part of the key for BPF map lookups,
for example. Given these hooks operate in process context 'current' is
always valid and pointing to the app that is performing mentioned
syscalls if it's subject to a v2 cgroup. Also with same motivation of
commit 7723628101 ("bpf: Introduce bpf_skb_ancestor_cgroup_id helper")
enable retrieval of ancestor from current so the cgroup id can be used
for policy lookups which can then forbid connect() / bind(), for example.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/d2a7ef42530ad299e3cbb245e6c12374b72145ef.1585323121.git.daniel@iogearbox.net
In Cilium we're mainly using BPF cgroup hooks today in order to implement
kube-proxy free Kubernetes service translation for ClusterIP, NodePort (*),
ExternalIP, and LoadBalancer as well as HostPort mapping [0] for all traffic
between Cilium managed nodes. While this works in its current shape and avoids
packet-level NAT for inter Cilium managed node traffic, there is one major
limitation we're facing today, that is, lack of netns awareness.
In Kubernetes, the concept of Pods (which hold one or multiple containers)
has been built around network namespaces, so while we can use the global scope
of attaching to root BPF cgroup hooks also to our advantage (e.g. for exposing
NodePort ports on loopback addresses), we also have the need to differentiate
between initial network namespaces and non-initial one. For example, ExternalIP
services mandate that non-local service IPs are not to be translated from the
host (initial) network namespace as one example. Right now, we have an ugly
work-around in place where non-local service IPs for ExternalIP services are
not xlated from connect() and friends BPF hooks but instead via less efficient
packet-level NAT on the veth tc ingress hook for Pod traffic.
On top of determining whether we're in initial or non-initial network namespace
we also have a need for a socket-cookie like mechanism for network namespaces
scope. Socket cookies have the nice property that they can be combined as part
of the key structure e.g. for BPF LRU maps without having to worry that the
cookie could be recycled. We are planning to use this for our sessionAffinity
implementation for services. Therefore, add a new bpf_get_netns_cookie() helper
which would resolve both use cases at once: bpf_get_netns_cookie(NULL) would
provide the cookie for the initial network namespace while passing the context
instead of NULL would provide the cookie from the application's network namespace.
We're using a hole, so no size increase; the assignment happens only once.
Therefore this allows for a comparison on initial namespace as well as regular
cookie usage as we have today with socket cookies. We could later on enable
this helper for other program types as well as we would see need.
(*) Both externalTrafficPolicy={Local|Cluster} types
[0] https://github.com/cilium/cilium/blob/master/bpf/bpf_sock.c
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/c47d2346982693a9cf9da0e12690453aded4c788.1585323121.git.daniel@iogearbox.net
Commit 0161a94e2d ("tools: gpio: Correctly add make dependencies for
gpio_utils") added a make rule for gpio-utils-in.o but used $(output)
instead of the correct $(OUTPUT) for the output directory, breaking
out-of-tree build (O=xx) with the following error:
No rule to make target 'out/tools/gpio/gpio-utils-in.o', needed by 'out/tools/gpio/lsgpio-in.o'. Stop.
Fix that.
Fixes: 0161a94e2d ("tools: gpio: Correctly add make dependencies for gpio_utils")
Cc: <stable@vger.kernel.org>
Cc: Laura Abbott <labbott@redhat.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Link: https://lore.kernel.org/r/20200325103154.32235-1-anssi.hannula@bitwise.fi
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
A new file was added to the tracing directory that will allow a user to
place a PID into it and the task associated to that PID will not have its
events traced. If the event-fork option is enabled, then neither will the
children of that task have its events traced.
Cc: linux-kselftest@vger.kernel.org
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
A new file was added to the tracing directory that will allow a user to
place a PID into it and the task associated to that PID will not be traced
by the function tracer. If the function-fork option is enabled, then neither
will the children of that task be traced by the function tracer.
Cc: linux-kselftest@vger.kernel.org
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add to the "x86 instruction decoder - new instructions" test the
following instructions:
incsspd
incsspq
rdsspd
rdsspq
saveprevssp
rstorssp
wrssd
wrssq
wrussd
wrussq
setssbsy
clrssbsy
endbr32
endbr64
And the "notrack" prefix for indirect calls and jumps.
For information about the instructions, refer Intel Control-flow
Enforcement Technology Specification May 2019 (334525-003).
Committer testing:
$ perf test instr
67: x86 instruction decoder - new instructions : Ok
$
Then use verbose mode and check one of those new instructions:
$ perf test -v instr |& grep saveprevssp
Decoded ok: f3 0f 01 ea saveprevssp
Decoded ok: f3 0f 01 ea saveprevssp
$
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi v. Shankar <ravi.v.shankar@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20200204171425.28073-3-yu-cheng.yu@intel.com
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the following CET instructions to the opcode map:
INCSSP:
Increment Shadow Stack pointer (SSP).
RDSSP:
Read SSP into a GPR.
SAVEPREVSSP:
Use "previous ssp" token at top of current Shadow Stack (SHSTK) to
create a "restore token" on the previous (outgoing) SHSTK.
RSTORSSP:
Restore from a "restore token" to SSP.
WRSS:
Write to kernel-mode SHSTK (kernel-mode instruction).
WRUSS:
Write to user-mode SHSTK (kernel-mode instruction).
SETSSBSY:
Verify the "supervisor token" pointed by MSR_IA32_PL0_SSP, set the
token busy, and set then Shadow Stack pointer(SSP) to the value of
MSR_IA32_PL0_SSP.
CLRSSBSY:
Verify the "supervisor token" and clear its busy bit.
ENDBR64/ENDBR32:
Mark a valid 64/32 bit control transfer endpoint.
Detailed information of CET instructions can be found in Intel Software
Developer's Manual.
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi v. Shankar <ravi.v.shankar@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20200204171425.28073-2-yu-cheng.yu@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds a new MACsec offloading option, MACSEC_OFFLOAD_MAC,
allowing a user to select a MAC as a provider for MACsec offloading
operations.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement the .snapshot region operation for the dummy data region. This
enables a region snapshot to be taken upon request via the new
DEVLINK_CMD_REGION_SNAPSHOT command.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the test checks the observable effect of skbedit priority:
queueing of packets at the correct qdisc band. It therefore misses the fact
that the counters for offloaded rules are not updated. Add an extra check
for the counter.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add local header dependency in lib.mk. This enforces the dependency
blindly even when a test doesn't include the file, with the benefit
of a simpler common logic without requiring individual tests to have
special rule for it.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fix memfd to support relocatable build (O=objdir). This calls out
source files necessary to build tests and simplfies the dependency
enforcement.
Tested the following:
Note that cross-build for fuse_mnt has dependency on -lfuse.
make all
make clean
make kselftest-install O=/arm64_build/ ARCH=arm64 HOSTCC=gcc \
CROSS_COMPILE=aarch64-linux-gnu- TARGETS=memfd
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fix seccomp relocatable builds. This is a simple fix to use the
right lib.mk variable TEST_GEN_PROGS. Local header dependency
is addressed in a change to lib.mk as a framework change that
enforces the dependency without requiring changes to individual
tests.
The following use-cases work with this change:
In seccomp directory:
make all and make clean
From top level from main Makefile:
make kselftest-install O=objdir ARCH=arm64 HOSTCC=gcc \
CROSS_COMPILE=aarch64-linux-gnu- TARGETS=seccomp
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When a selftest would timeout before, the program would just fall over
and no accounting of failures would be reported (i.e. it would result in
an incomplete TAP report). Instead, add an explicit SIGALRM handler to
cleanly catch and report the timeout.
Before:
[==========] Running 2 tests from 2 test cases.
[ RUN ] timeout.finish
[ OK ] timeout.finish
[ RUN ] timeout.too_long
Alarm clock
After:
[==========] Running 2 tests from 2 test cases.
[ RUN ] timeout.finish
[ OK ] timeout.finish
[ RUN ] timeout.too_long
timeout.too_long: Test terminated by timeout
[ FAIL ] timeout.too_long
[==========] 1 / 2 tests passed.
[ FAILED ]
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In order to better handle timeout failures, rearrange the child waiting
logic into a separate function. This is mostly a copy/paste with an
indentation change. To handle pid tracking, a new field is added for
the child pid. Also move the alarm() pairing into the function.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a missing raw dmesg test log to test the kunit_tool's dmesg parser.
test_prefix_poundsign and test_output_with_prefix_isolated_correctly
fail without this test log.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Introduce KUNIT_SUBTEST_INDENT macro which corresponds to 4-space
indentation and KUNIT_SUBSUBTEST_INDENT macro which corresponds to
8-space indentation in line with TAP spec (e.g. see "Subtests"
section of https://node-tap.org/tap-protocol/).
Use these macros in place of one or two tabs in strings to clarify
why we are indenting.
Suggested-by: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
A fixed y-axis scale was missed during a change to autoscale.
Correct it.
Fixes: 709bd70d07 ("tools/power/x86/intel_pstate_tracer: change several graphs to autoscale y-axis")
Signed-off-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When DSCP is updated through an offloaded pedit action, DSCP rewrite on
egress should be disabled. Add a test that check that it is so.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test that runs packets with dsfield set, and test that pedit adjusts
the DSCP or ECN parts or the whole field.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The $(CC) passed to arch_errno_names.sh may include a series of parameters
along with gcc itself. To avoid overwriting the following parameters of
arch_errno_names.sh and break the build like below, we just pick up the
first word of the $(CC).
find: unknown predicate `-m64/arch'
x86_64-wrs-linux-gcc: warning: '-x c' after last input file has no effect
x86_64-wrs-linux-gcc: error: unrecognized command line option '-m64/include/uapi/asm-generic/errno.h'
x86_64-wrs-linux-gcc: fatal error: no input files
Signed-off-by: He Zhe <zhe.he@windriver.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/1581618066-187262-2-git-send-email-zhe.he@windriver.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Terms may have a NULL config in which case a strcmp will SEGV. This can
be reproduced with:
perf stat -e '*/event=?,nr/' sleep 1
Add a NULL check to avoid this. This was caught by LLVM's libfuzzer.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20200325164022.41385-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add to the "x86 instruction decoder - new instructions" test the following
instructions:
incsspd
incsspq
rdsspd
rdsspq
saveprevssp
rstorssp
wrssd
wrssq
wrussd
wrussq
setssbsy
clrssbsy
endbr32
endbr64
And the notrack prefix for indirect calls and jumps.
For information about the instructions, refer Intel Control-flow
Enforcement Technology Specification May 2019 (334525-003).
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lkml.kernel.org/r/20200204171425.28073-3-yu-cheng.yu@intel.com
Add the following CET instructions to the opcode map:
INCSSP:
Increment Shadow Stack pointer (SSP).
RDSSP:
Read SSP into a GPR.
SAVEPREVSSP:
Use "previous ssp" token at top of current Shadow Stack (SHSTK) to
create a "restore token" on the previous (outgoing) SHSTK.
RSTORSSP:
Restore from a "restore token" to SSP.
WRSS:
Write to kernel-mode SHSTK (kernel-mode instruction).
WRUSS:
Write to user-mode SHSTK (kernel-mode instruction).
SETSSBSY:
Verify the "supervisor token" pointed by MSR_IA32_PL0_SSP, set the
token busy, and set then Shadow Stack pointer(SSP) to the value of
MSR_IA32_PL0_SSP.
CLRSSBSY:
Verify the "supervisor token" and clear its busy bit.
ENDBR64/ENDBR32:
Mark a valid 64/32 bit control transfer endpoint.
Detailed information of CET instructions can be found in Intel Software
Developer's Manual.
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lkml.kernel.org/r/20200204171425.28073-2-yu-cheng.yu@intel.com
Fix a copy-paste typo in a comment and error message.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320205546.2396-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After changes to add update_reg_bounds after ALU ops and adding ALU32
bounds tracking the error message is changed in the 32-bit right shift
tests.
Test "#70/u bounds check after 32-bit right shift with 64-bit input FAIL"
now fails with,
Unexpected error message!
EXP: R0 invalid mem access
RES: func#0 @0
7: (b7) r1 = 2
8: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=invP2 R10=fp0 fp-8_w=mmmmmmmm
8: (67) r1 <<= 31
9: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=invP4294967296 R10=fp0 fp-8_w=mmmmmmmm
9: (74) w1 >>= 31
10: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=invP0 R10=fp0 fp-8_w=mmmmmmmm
10: (14) w1 -= 2
11: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=invP4294967294 R10=fp0 fp-8_w=mmmmmmmm
11: (0f) r0 += r1
math between map_value pointer and 4294967294 is not allowed
And test "#70/p bounds check after 32-bit right shift with 64-bit input
FAIL" now fails with,
Unexpected error message!
EXP: R0 invalid mem access
RES: func#0 @0
7: (b7) r1 = 2
8: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv2 R10=fp0 fp-8_w=mmmmmmmm
8: (67) r1 <<= 31
9: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv4294967296 R10=fp0 fp-8_w=mmmmmmmm
9: (74) w1 >>= 31
10: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv0 R10=fp0 fp-8_w=mmmmmmmm
10: (14) w1 -= 2
11: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv4294967294 R10=fp0 fp-8_w=mmmmmmmm
11: (0f) r0 += r1
last_idx 11 first_idx 0
regs=2 stack=0 before 10: (14) w1 -= 2
regs=2 stack=0 before 9: (74) w1 >>= 31
regs=2 stack=0 before 8: (67) r1 <<= 31
regs=2 stack=0 before 7: (b7) r1 = 2
math between map_value pointer and 4294967294 is not allowed
Before this series we did not trip the "math between map_value pointer..."
error because check_reg_sane_offset is never called in
adjust_ptr_min_max_vals(). Instead we have a register state that looks
like this at line 11*,
11: R0_w=map_value(id=0,off=0,ks=8,vs=8,
smin_value=0,smax_value=0,
umin_value=0,umax_value=0,
var_off=(0x0; 0x0))
R1_w=invP(id=0,
smin_value=0,smax_value=4294967295,
umin_value=0,umax_value=4294967295,
var_off=(0xfffffffe; 0x0))
R10=fp(id=0,off=0,
smin_value=0,smax_value=0,
umin_value=0,umax_value=0,
var_off=(0x0; 0x0)) fp-8_w=mmmmmmmm
11: (0f) r0 += r1
In R1 'smin_val != smax_val' yet we have a tnum_const as seen
by 'var_off(0xfffffffe; 0x0))' with a 0x0 mask. So we hit this check
in adjust_ptr_min_max_vals()
if ((known && (smin_val != smax_val || umin_val != umax_val)) ||
smin_val > smax_val || umin_val > umax_val) {
/* Taint dst register if offset had invalid bounds derived from
* e.g. dead branches.
*/
__mark_reg_unknown(env, dst_reg);
return 0;
}
So we don't throw an error here and instead only throw an error
later in the verification when the memory access is made.
The root cause in verifier without alu32 bounds tracking is having
'umin_value = 0' and 'umax_value = U64_MAX' from BPF_SUB which we set
when 'umin_value < umax_val' here,
if (dst_reg->umin_value < umax_val) {
/* Overflow possible, we know nothing */
dst_reg->umin_value = 0;
dst_reg->umax_value = U64_MAX;
} else { ...}
Later in adjust_calar_min_max_vals we previously did a
coerce_reg_to_size() which will clamp the U64_MAX to U32_MAX by
truncating to 32bits. But either way without a call to update_reg_bounds
the less precise bounds tracking will fall out of the alu op
verification.
After latest changes we now exit adjust_scalar_min_max_vals with the
more precise umin value, due to zero extension propogating bounds from
alu32 bounds into alu64 bounds and then calling update_reg_bounds.
This then causes the verifier to trigger an earlier error and we get
the error in the output above.
This patch updates tests to reflect new error message.
* I have a local patch to print entire verifier state regardless if we
believe it is a constant so we can get a full picture of the state.
Usually if tnum_is_const() then bounds are also smin=smax, etc. but
this is not always true and is a bit subtle. Being able to see these
states helps understand dataflow imo. Let me know if we want something
similar upstream.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158507161475.15666.3061518385241144063.stgit@john-Precision-5820-Tower
Overlapping header include additions in macsec.c
A bug fix in 'net' overlapping with the removal of 'version'
string in ena_netdev.c
Overlapping test additions in selftests Makefile
Overlapping PCI ID table adjustments in iwlwifi driver.
Signed-off-by: David S. Miller <davem@davemloft.net>
For each prog/btf load we allocate and free 16 megs of verifier buffer.
On production systems it doesn't really make sense because the
programs/btf have gone through extensive testing and (mostly) guaranteed
to successfully load.
Let's assume successful case by default and skip buffer allocation
on the first try. If there is an error, start with BPF_LOG_BUF_SIZE
and double it on each ENOSPC iteration.
v3:
* Return -ENOMEM when can't allocate log buffer (Andrii Nakryiko)
v2:
* Don't allocate the buffer at all on the first try (Andrii Nakryiko)
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200325195521.112210-1-sdf@google.com
Has been unused since commit ef99b02b23 ("libbpf: capture value in BTF
type info for BTF-defined map defs").
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200325113655.19341-1-tklauser@distanz.ch
Pull networking fixes from David Miller:
1) Fix deadlock in bpf_send_signal() from Yonghong Song.
2) Fix off by one in kTLS offload of mlx5, from Tariq Toukan.
3) Add missing locking in iwlwifi mvm code, from Avraham Stern.
4) Fix MSG_WAITALL handling in rxrpc, from David Howells.
5) Need to hold RTNL mutex in tcindex_partial_destroy_work(), from Cong
Wang.
6) Fix producer race condition in AF_PACKET, from Willem de Bruijn.
7) cls_route removes the wrong filter during change operations, from
Cong Wang.
8) Reject unrecognized request flags in ethtool netlink code, from
Michal Kubecek.
9) Need to keep MAC in reset until PHY is up in bcmgenet driver, from
Doug Berger.
10) Don't leak ct zone template in act_ct during replace, from Paul
Blakey.
11) Fix flushing of offloaded netfilter flowtable flows, also from Paul
Blakey.
12) Fix throughput drop during tx backpressure in cxgb4, from Rahul
Lakkireddy.
13) Don't let a non-NULL skb->dev leave the TCP stack, from Eric
Dumazet.
14) TCP_QUEUE_SEQ socket option has to update tp->copied_seq as well,
also from Eric Dumazet.
15) Restrict macsec to ethernet devices, from Willem de Bruijn.
16) Fix reference leak in some ethtool *_SET handlers, from Michal
Kubecek.
17) Fix accidental disabling of MSI for some r8169 chips, from Heiner
Kallweit.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (138 commits)
net: Fix CONFIG_NET_CLS_ACT=n and CONFIG_NFT_FWD_NETDEV={y, m} build
net: ena: Add PCI shutdown handler to allow safe kexec
selftests/net/forwarding: define libs as TEST_PROGS_EXTENDED
selftests/net: add missing tests to Makefile
r8169: re-enable MSI on RTL8168c
net: phy: mdio-bcm-unimac: Fix clock handling
cxgb4/ptp: pass the sign of offset delta in FW CMD
net: dsa: tag_8021q: replace dsa_8021q_remove_header with __skb_vlan_pop
net: cbs: Fix software cbs to consider packet sending time
net/mlx5e: Do not recover from a non-fatal syndrome
net/mlx5e: Fix ICOSQ recovery flow with Striding RQ
net/mlx5e: Fix missing reset of SW metadata in Striding RQ reset
net/mlx5e: Enhance ICOSQ WQE info fields
net/mlx5_core: Set IB capability mask1 to fix ib_srpt connection failure
selftests: netfilter: add nfqueue test case
netfilter: nft_fwd_netdev: allow to redirect to ifb via ingress
netfilter: nft_fwd_netdev: validate family and chain type
netfilter: nft_set_rbtree: Detect partial overlaps on insertion
netfilter: nft_set_rbtree: Introduce and use nft_rbtree_interval_start()
netfilter: nft_set_pipapo: Separate partial and complete overlap cases on insertion
...
The method of unwinding for kernel space is defined by the kernel
config, not by the value of --call-graph. Improve the documentation to
reflect this.
Signed-off-by: Tony Jones <tonyj@suse.de>
Link: http://lore.kernel.org/lkml/20200325164053.10177-1-tonyj@suse.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The lib files should not be defined as TEST_PROGS, or we will run them
in run_kselftest.sh.
Also remove ethtool_lib.sh exec permission.
Fixes: 81573b18f2 ("selftests/net/forwarding: add Makefile to install tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Find some tests are missed in Makefile by running:
for file in $(ls *.sh); do grep -q $file Makefile || echo $file; done
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rework kunit_tool in order to allow .kunitconfig files to better enforce
that disabled items in .kunitconfig are disabled in the generated
.config.
Previously, kunit_tool simply enforced that any line present in
.kunitconfig was also present in .config, but this could cause problems
if a config option was disabled in .kunitconfig, but not listed in .config
due to (for example) having disabled dependencies.
To fix this, re-work the parser to track config names and values, and
require values to match unless they are explicitly disabled with the
"CONFIG_x is not set" comment (or by setting its value to 'n'). Those
"disabled" values will pass validation if omitted from the .config, but
not if they have a different value.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In preparation to adding a vmlinux.o specific pass, rearrange some
code. No functional changes intended.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.924304616@infradead.org
Perf shows there is significant time in find_rela_by_dest(); this is
because we have to iterate the address space per byte, looking for
relocation entries.
Optimize this by reducing the address space granularity.
This reduces objtool on vmlinux.o runtime from 4.8 to 4.4 seconds.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.861321325@infradead.org
Perf shows we spend a measurable amount of time spend cleaning up
right before we exit anyway. Avoid the needsless work and just
terminate.
This reduces objtool on vmlinux.o runtime from 5.4s to 4.8s
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.800720170@infradead.org
Perf showed that __hash_init() is a significant portion of
read_sections(), so instead of doing a per section rela_hash, use an
elf-wide rela_hash.
Statistics show us there are about 1.1 million relas, so size it
accordingly.
This reduces the objtool on vmlinux.o runtime to a third, from 15 to 5
seconds.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.739153726@infradead.org
Perf showed that find_symbol_by_name() takes time; add a symbol name
hash.
This shaves another second off of objtool on vmlinux.o runtime, down
to 15 seconds.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.676865656@infradead.org
Perf shows we're spending a lot of time in find_insn() and the
statistics show we have around 3.2 million instruction. Increase the
hash table size to reduce the bucket load from around 50 to 3.
This shaves about 2s off of objtool on vmlinux.o runtime, down to 16s.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.617882545@infradead.org
All of:
read_symbols(), find_symbol_by_offset(), find_symbol_containing(),
find_containing_func()
do a linear search of the symbols. Add an RB tree to make it go
faster.
This about halves objtool runtime on vmlinux.o, from 34s to 18s.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.499016559@infradead.org
In order to avoid yet another linear search of (20k) sections, add a
name based hash.
This reduces objtool runtime on vmlinux.o by some 10s to around 35s.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.440174280@infradead.org
In order to avoid a linear search (over 20k entries), add an
section_hash to the elf object.
This reduces objtool on vmlinux.o from a few minutes to around 45
seconds.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.381249993@infradead.org
Have it print a few numbers which can be used to size the hashtables.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.321381240@infradead.org
The symbol index is object wide, not per section, so it makes no sense
to have the symbol_hash be part of the section object. By moving it to
the elf object we avoid the linear sections iteration.
This reduces the runtime of objtool on vmlinux.o from over 3 hours (I
gave up) to a few minutes. The defconfig vmlinux.o has around 20k
sections.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.261852348@infradead.org
Now that func_for_each_insn() is available, rename
func_for_each_insn_all(). This gets us:
sym_for_each_insn() - iterate on symbol offset/len
func_for_each_insn() - iterate on insn->func
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.083720147@infradead.org
There is func_for_each_insn() and func_for_each_insn_all(), the both
iterate the instructions, but the first uses symbol offset/length
while the second uses insn->func.
Rename func_for_each_insn() to sym_for_eac_insn() because it iterates
on symbol information.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.024341229@infradead.org
Trivial 'cleanup' to save one indentation level and match
validate_call().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160923.963996225@infradead.org
This adds test cases for ptrace deadlocks.
Additionally fixes a compile problem in get_syscall_info.c,
observed with gcc-4.8.4:
get_syscall_info.c: In function 'get_syscall_info':
get_syscall_info.c:93:3: error: 'for' loop initial declarations are only
allowed in C99 mode
for (unsigned int i = 0; i < ARRAY_SIZE(args); ++i) {
^
get_syscall_info.c:93:3: note: use option -std=c99 or -std=gnu99 to compile
your code
Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
We recently regressed (cf. [1] and its corresponding fix in [2]) returning
ENOMEM when trying to create a process in a pid namespace whose init
process/child subreaper has already died. This has caused confusion at
least once before that (cf. [3]). Let's add a simple regression test to
catch this in the future.
[1]: 49cb2fc42c ("fork: extend clone3() to support setting a PID")
[2]: b26ebfe12f ("pid: Fix error return value in some cases")
[3]: 35f71bc0a0 ("fork: report pid reservation failure properly")
Cc: Corey Minyard <cminyard@mvista.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Adrian Reber <areber@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
"retain good changes" means that I left the help string split up instead
of having this weird thing where it tries to merge together the last three
lines and it looks **really** bad
Signed-off-by: Gabriel Ravier <gabravier@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
There is a spelling mistake in an error message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
If '-o' was used more than 64 times in a single invocation of gpio-hammer,
this could lead to an overflow of the 'lines' array. This commit fixes
this by avoiding the overflow and giving a proper diagnostic back to the
user
Signed-off-by: Gabriel Ravier <gabravier@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Some specific tests in powerpc can take longer than the default 45
seconds that added in commit 852c8cbf34 ("selftests/kselftest/runner.sh:
Add 45 second timeout per test") to run, the following test result was
collected across 2 Power8 nodes and 1 Power9 node in our pool:
powerpc/benchmarks/futex_bench - 52s
powerpc/dscr/dscr_sysfs_test - 116s
powerpc/signal/signal_fuzzer - 88s
powerpc/tm/tm_unavailable_test - 168s
powerpc/tm/tm-poison - 240s
Thus they will fail with TIMEOUT error. Disable the timeout setting
for these sub-tests to allow them finish properly.
https://bugs.launchpad.net/bugs/1864642
Fixes: 852c8cbf34 ("selftests/kselftest/runner.sh: Add 45 second timeout per test")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200318060004.10685-1-po-hsu.lin@canonical.com
The test case tm-signal-context-force-tm expects a segfault to happen
on returning from signal handler, and then does a setcontext() to run
the test again. However, the test doesn't always segfault, causing the
test to run a single time.
This patch fixes the test by putting it within a loop and jumping, via
setcontext, just prior to the loop in case it segfaults. This way we
get the desired behavior (run the test COUNT_MAX times) regardless if
it segfaults or not. This also reduces the use of setcontext for
control flow logic, keeping it only in the segfault handler.
Also, since 'count' is changed within the signal handler, it is
declared as volatile to prevent any compiler optimization getting
confused with asynchronous changes.
Signed-off-by: Gustavo Luiz Duarte <gustavold@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200211033831.11165-3-gustavold@linux.ibm.com
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) A new selftest for nf_queue, from Florian Westphal. This test
covers two recent fixes: 07f8e4d0fd ("tcp: also NULL skb->dev
when copy was needed") and b738a185be ("tcp: ensure skb->dev is
NULL before leaving TCP stack").
2) The fwd action breaks with ifb. For safety in next extensions,
make sure the fwd action only runs from ingress until it is extended
to be used from a different hook.
3) The pipapo set type now reports EEXIST in case of subrange overlaps.
Update the rbtree set to validate range overlaps, so far this
validation is only done only from userspace. From Stefano Brivio.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test case to check nf queue infrastructure.
Could be extended in the future to also cover serialization of
conntrack, uid and secctx attributes in nfqueue.
For now, this checks that 'queue bypass' works, that a queue rule with
no bypass option blocks traffic and that userspace receives the expected
number of packets.
For this we add two queues and hook all of
prerouting/input/forward/output/postrouting.
Packets get queued twice with a dummy base chain in between:
This passes with current nf tree, but reverting
commit 946c0d8e6e ("netfilter: nf_queue: fix reinject verdict handling")
makes this trip (it processes 30 instead of expected 20 packets).
v2: update config file with queue and other options missing/needed for
other tests.
v3: also test with tcp, this reveals problem with commit
28f8bfd1ac ("netfilter: Support iif matches in POSTROUTING"), due to
skb->dev pointing at another skb in the retransmit rbtree (skb->dev
aliases to rbnode child).
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull perf tooling fixes from Ingo Molnar:
"A handful of tooling fixes all across the map, no kernel changes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools headers uapi: Update linux/in.h copy
perf probe: Do not depend on dwfl_module_addrsym()
perf probe: Fix to delete multiple probe event
perf parse-events: Fix reading of invalid memory in event parsing
perf python: Fix clang detection when using CC=clang-version
perf map: Fix off by one in strncpy() size argument
tools: Let O= makes handle a relative path with -C option
Perf gets dso details from two different sources. 1st, from builid
headers in perf.data and 2nd from MMAP2 samples. Dso from buildid
header does not have dso_id detail. And dso from MMAP2 samples does
not have buildid information. If detail of the same dso is present
at both the places, filename is common.
Previously, __dsos__findnew_link_by_longname_id() used to compare only
long or short names, but Commit 0e3149f86b ("perf dso: Move dso_id
from 'struct map' to 'struct dso'") also added a dso_id comparison.
Because of that, now perf is creating two different dso objects of the
same file, one from buildid header (with dso_id but without buildid)
and second from MMAP2 sample (with buildid but without dso_id).
This is causing issues with archive, buildid-list etc subcommands. Fix
this by comparing dso_id only when it's present. And incase dso is
present in 'dsos' list without dso_id, inject dso_id detail as well.
Before:
$ sudo ./perf buildid-list -H
0000000000000000000000000000000000000000 /usr/bin/ls
0000000000000000000000000000000000000000 /usr/lib64/ld-2.30.so
0000000000000000000000000000000000000000 /usr/lib64/libc-2.30.so
$ ./perf archive
perf archive: no build-ids found
After:
$ ./perf buildid-list -H
b6b1291d0cead046ed0fa5734037fa87a579adee /usr/bin/ls
641f0c90cfa15779352f12c0ec3c7a2b2b6f41e8 /usr/lib64/ld-2.30.so
675ace3ca07a0b863df01f461a7b0984c65c8b37 /usr/lib64/libc-2.30.so
$ ./perf archive
Now please run:
$ tar xvf perf.data.tar.bz2 -C ~/.debug
wherever you need to run 'perf report' on.
Committer notes:
Renamed is_empty_dso_id() to dso_id__empty() and inject_dso_id() to
dso__inject_id() to keep namespacing consistent.
Fixes: 0e3149f86b ("perf dso: Move dso_id from 'struct map' to 'struct dso'")
Reported-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200324042424.68366-1-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'snprintf' returns the number of characters which would be generated for
the given input.
If the returned value is *greater than* or equal to the buffer size, it
means that the output has been truncated.
Fix the overflow test accordingly.
Fixes: 7780c25bae ("perf tools: Allow ability to map cpus to nodes easily")
Fixes: 92a7e12780 ("perf cpumap: Add cpu__max_present_cpu()")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: He Zhe <zhe.he@windriver.com>
Cc: Jan Stancek <jstancek@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200324070319.10901-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add creating event aliases to the pmu-events test.
So currently we verify that the generated pmu-events.c is as expected for
some test events. Now test that we generate aliases as expected for those
events during normal operation.
For that, we cycle through each HW PMU in the system, and use the test
events to create aliases, and verify those against known, expected values.
For core PMUs, we should create an alias for every event in
test_cpu_events[].
However, for uncore PMUs, they need to be matched by the pmu_event.pmu
member, so use test_uncore_events[]; so check the match beforehand with
pmu_uncore_alias_match().
A sample run is as follows for my x86 machine:
john@linux-3c19:~/linux> tools/perf/perf test -vv 10
10: PMU events :
--- start ---
...
testing PMU uncore_arb aliases: no events to match
testing PMU cstate_pkg aliases: no events to match
skipping testing PMU breakpoint
testing aliases PMU uncore_cbox_1: matched event unc_cbo_xsnp_response.miss_eviction
testing PMU uncore_cbox_1 aliases: pass
testing PMU power aliases: no events to match
testing aliases PMU cpu: matched event bp_l1_btb_correct
testing aliases PMU cpu: matched event bp_l2_btb_correct
testing aliases PMU cpu: matched event segment_reg_loads.any
testing aliases PMU cpu: matched event dispatch_blocked.any
testing aliases PMU cpu: matched event eist_trans
testing PMU cpu aliases: pass
testing PMU intel_pt aliases: no events to match
skipping testing PMU software
skipping testing PMU intel_bts
testing PMU uncore_imc aliases: no events to match
testing aliases PMU uncore_cbox_0: matched event unc_cbo_xsnp_response.miss_eviction
testing PMU uncore_cbox_0 aliases: pass
testing PMU cstate_core aliases: no events to match
skipping testing PMU tracepoint
testing PMU msr aliases: no events to match
test child finished with 0
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linuxarm@huawei.com
Link: http://lore.kernel.org/lkml/1584442939-8911-8-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf pmu-events test will want to use pmu_uncore_alias_match(), so
make it public.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linuxarm@huawei.com
Link: http://lore.kernel.org/lkml/1584442939-8911-7-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a function to decide whether a PMU is a core PMU.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linuxarm@huawei.com
Link: http://lore.kernel.org/lkml/1584442939-8911-6-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The initial test will verify that the test tables in generated pmu-events.c
match against known, expected values.
For known events added in pmu-events/arch/test, we need to add an entry
in test_cpu_aliases_events[] or test_uncore_events[].
A sample run is as follows for x86:
john@linux-3c19:~/linux> tools/perf/perf test -vv 10
10: PMU event aliases :
--- start ---
test child forked, pid 5316
testing event table bp_l1_btb_correct: pass
testing event table bp_l2_btb_correct: pass
testing event table segment_reg_loads.any: pass
testing event table dispatch_blocked.any: pass
testing event table eist_trans: pass
testing event table uncore_hisi_ddrc.flux_wcmd: pass
testing event table unc_cbo_xsnp_response.miss_eviction: pass
test child finished with 0
---- end ----
PMU event aliases: Ok
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linuxarm@huawei.com
[ Fixup test_cpu_events[] and test_uncore_events[] sentinels to initialize one of its members to NULL, fixing the build in older compilers ]
Link: http://lore.kernel.org/lkml/1584442939-8911-5-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Create pmu_add_cpu_aliases_map() from pmu_add_cpu_aliases(), so the caller
can pass the map; the pmu-events test would use this since there would
be no CPUID matching to a mapfile there.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linuxarm@huawei.com
Link: http://lore.kernel.org/lkml/1584442939-8911-4-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With the goal of supporting pmu-events test case, introduce support for
a test events folder.
These test events can be used for testing generation of pmu-event tables
and alias creation for any arch.
When running the pmu-events test case, these test events will be used as
the platform-agnostic events, so aliases can be created per-PMU and
validated against known expected values.
To support the test events, add a "testcpu" entry in pmu_events_map[].
The pmu-events test will be able to lookup the events map for "testcpu",
to verify the generated tables against expected values.
The resultant generated pmu-events.c will now look like the following:
struct pmu_event pme_ampere_emag[] = {
{
.name = "ldrex_spec",
.event = "event=0x6c",
.desc = "Exclusive operation spe...",
.topic = "intrinsic",
.long_desc = "Exclusive operation ...",
},
...
};
struct pmu_event pme_test_cpu[] = {
{
.name = "uncore_hisi_ddrc.flux_wcmd",
.event = "event=0x2",
.desc = "DDRC write commands. Unit: hisi_sccl,ddrc ",
.topic = "uncore",
.long_desc = "DDRC write commands",
.pmu = "hisi_sccl,ddrc",
},
{
.name = "unc_cbo_xsnp_response.miss_eviction",
.event = "umask=0x81,event=0x22",
.desc = "Unit: uncore_cbox A cross-core snoop resulted ...",
.topic = "uncore",
.long_desc = "A cross-core snoop resulted from L3 ...",
.pmu = "uncore_cbox",
},
{
.name = "eist_trans",
.event = "umask=0x0,period=200000,event=0x3a",
.desc = "Number of Enhanced Intel SpeedStep(R) ...",
.topic = "other",
},
{
.name = 0,
},
};
struct pmu_events_map pmu_events_map[] = {
...
{
.cpuid = "0x00000000500f0000",
.version = "v1",
.type = "core",
.table = pme_ampere_emag
},
...
{
.cpuid = "testcpu",
.version = "v1",
.type = "core",
.table = pme_test_cpu,
},
{
.cpuid = 0,
.version = 0,
.type = 0,
.table = 0,
},
};
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linuxarm@huawei.com
Link: http://lore.kernel.org/lkml/1584442939-8911-3-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add some test PMU events. The events are randomly chosen from x86 and
arm64 JSONs. The events include CPU and uncore events.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linuxarm@huawei.com
Link: http://lore.kernel.org/lkml/1584442939-8911-2-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get the changes in:
2677625387 ("seg6: fix SRv6 L2 tunnels to use IANA-assigned protocol number")
That ends up automatically adding the new IPPROTO_ETHERNET to the socket
args beautifiers:
$ tools/perf/trace/beauty/socket_ipproto.sh > before
Apply this patch:
$ tools/perf/trace/beauty/socket_ipproto.sh > after
$ diff -u before after
--- before 2020-03-19 11:48:36.876673819 -0300
+++ after 2020-03-19 11:49:00.148541377 -0300
@@ -6,6 +6,7 @@
[132] = "SCTP",
[136] = "UDPLITE",
[137] = "MPLS",
+ [143] = "ETHERNET",
[17] = "UDP",
[1] = "ICMP",
[22] = "IDP",
$
Addresses this tools/perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h'
diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h
Cc: David S. Miller <davem@davemloft.net>
Cc: Paolo Lungaroni <paolo.lungaroni@cnit.it>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch updates the PMCs for AMD Zen1 core based processors (Family
17h; Models 0 through 2F) to be in accordance with PMCs as
documented in the latest versions of the AMD Processor Programming
Reference [1], [2] and [3]. Note that some events, such as FPU pipe
assignment are missing in [1], and therefore [3] is included for full
coverage of events.
PMCs added:
fpu_pipe_assignment.dual{0|1|2|3}
fpu_pipe_assignment.total{0|1|2|3}
ls_mab_alloc.dc_prefetcher
ls_mab_alloc.stores
ls_mab_alloc.loads
bp_dyn_ind_pred
bp_de_redirect
PMC removed:
ex_ret_cond_misp
Cumulative counts, fpu_pipe_assignment.total and
fpu_pipe_assignment.dual, existed in v1, but did expose port-level
counters.
ex_ret_cond_misp has been removed as it has been removed from the latest
versions of the PPR, and when tested, always seems to sample zero as
tested on a Ryzen 3400G system.
[1]: Processor Programming Reference (PPR) for AMD Family 17h Models
01h,08h, Revision B2 Processors, 54945 Rev 3.03 - Jun 14, 2019.
[2]: Processor Programming Reference (PPR) for AMD Family 17h Model 18h,
Revision B1 Processors, 55570-B1 Rev 3.14 - Sep 26, 2019.
[3]: OSRR for AMD Family 17h processors, Models 00h-2Fh, 56255 Rev 3.03 - July, 2018
All of the PPRs can be found at:
https://bugzilla.kernel.org/show_bug.cgi?id=206537
Signed-off-by: Vijay Thakkar <vijaythakkar@me.com>
Acked-by: Kim Phillips <kim.phillips@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jon Grimm <jon.grimm@amd.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: vijay thakkar <vijaythakkar@me.com>
Link: http://lore.kernel.org/lkml/20200318190002.307290-4-vijaythakkar@me.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch changes the previous blanket detection of AMD Family 17h
processors to be more specific to Zen1 core based products only by
replacing model detection regex pattern [[:xdigit:]]+ with
([12][0-9A-F]|[0-9A-F]), restricting to models 0 though 2f only.
This change is required to allow for the addition of separate PMU events
for Zen2 core based models in the following patches as those belong to
family 17h but have different PMCs. Current PMU events directory has
also been renamed to "amdzen1" from "amdfam17h" to reflect this
specificity.
Note that although this change does not break PMU counters for existing
zen1 based systems, it does disable the current set of counters for zen2
based systems. Counters for zen2 have been added in the following
patches in this patchset.
Signed-off-by: Vijay Thakkar <vijaythakkar@me.com>
Acked-by: Kim Phillips <kim.phillips@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jon Grimm <jon.grimm@amd.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200318190002.307290-2-vijaythakkar@me.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit f01642e491 ("perf metricgroup: Support multiple events for
metricgroup") introduced support for multiple events in a metric group.
But with the current upstream, metric events names are not printed
properly incase we try to run multiple metric groups with overlapping
event.
With current upstream version, incase of overlapping metric events issue
is, we always start our comparision logic from start. So, the events
which already matched with some metric group also take part in
comparision logic. Because of that when we have overlapping events, we
end up matching current metric group event with already matched one.
For example, in skylake machine we have metric event CoreIPC and
Instructions. Both of them need 'inst_retired.any' event value. As
events in Instructions is subset of events in CoreIPC, they endup in
pointing to same 'inst_retired.any' value.
In skylake platform:
command:# ./perf stat -M CoreIPC,Instructions -C 0 sleep 1
Performance counter stats for 'CPU(s) 0':
1,254,992,790 inst_retired.any # 1254992790.0
Instructions
# 1.3 CoreIPC
977,172,805 cycles
1,254,992,756 inst_retired.any
1.000802596 seconds time elapsed
command:# sudo ./perf stat -M UPI,IPC sleep 1
Performance counter stats for 'sleep 1':
948,650 uops_retired.retire_slots
866,182 inst_retired.any # 0.7 IPC
866,182 inst_retired.any
1,175,671 cpu_clk_unhalted.thread
Patch fixes the issue by adding a new bool pointer 'evlist_used' to keep
track of events which already matched with some group by setting it
true. So, we skip all used events in list when we start comparision
logic. Patch also make some changes in comparision logic, incase we get
a match miss, we discard the whole match and start again with first
event id in metric event.
With this patch:
In skylake platform:
command:# ./perf stat -M CoreIPC,Instructions -C 0 sleep 1
Performance counter stats for 'CPU(s) 0':
3,348,415 inst_retired.any # 0.3 CoreIPC
11,779,026 cycles
3,348,381 inst_retired.any # 3348381.0
Instructions
1.001649056 seconds time elapsed
command:# ./perf stat -M UPI,IPC sleep 1
Performance counter stats for 'sleep 1':
1,023,148 uops_retired.retire_slots # 1.1 UPI
924,976 inst_retired.any
924,976 inst_retired.any # 0.6 IPC
1,489,414 cpu_clk_unhalted.thread
1.003064672 seconds time elapsed
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200221101121.28920-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is a slight misalignment in -A -I output.
For example:
# perf stat -e cpu/event=cpu-cycles/ -a -A -I 1000
# time CPU counts unit events
1.000440863 CPU0 1,068,388 cpu/event=cpu-cycles/
1.000440863 CPU1 875,954 cpu/event=cpu-cycles/
1.000440863 CPU2 3,072,538 cpu/event=cpu-cycles/
1.000440863 CPU3 4,026,870 cpu/event=cpu-cycles/
1.000440863 CPU4 5,919,630 cpu/event=cpu-cycles/
1.000440863 CPU5 2,714,260 cpu/event=cpu-cycles/
1.000440863 CPU6 2,219,240 cpu/event=cpu-cycles/
1.000440863 CPU7 1,299,232 cpu/event=cpu-cycles/
The value of counts is not aligned with the column "counts" and
the event name is not aligned with the column "events".
With this patch, the output is,
# perf stat -e cpu/event=cpu-cycles/ -a -A -I 1000
# time CPU counts unit events
1.000423009 CPU0 997,421 cpu/event=cpu-cycles/
1.000423009 CPU1 1,422,042 cpu/event=cpu-cycles/
1.000423009 CPU2 484,651 cpu/event=cpu-cycles/
1.000423009 CPU3 525,791 cpu/event=cpu-cycles/
1.000423009 CPU4 1,370,100 cpu/event=cpu-cycles/
1.000423009 CPU5 442,072 cpu/event=cpu-cycles/
1.000423009 CPU6 205,643 cpu/event=cpu-cycles/
1.000423009 CPU7 1,302,250 cpu/event=cpu-cycles/
Now output is aligned.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200218071614.25736-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When performing "perf report --group", it shows the event group information
together. In previous patch, we have supported a new option "--group-sort-idx"
to sort the output by the event at the index n in event group.
It would be nice if we can use a hotkey in browser to select a event
to sort.
For example,
# perf report --group
Samples: 12K of events 'cpu/instructions,period=2000003/, cpu/cpu-cycles,period=200003/, ...
Overhead Command Shared Object Symbol
92.19% 98.68% 0.00% 93.30% mgen mgen [.] LOOP1
3.12% 0.29% 0.00% 0.16% gsd-color libglib-2.0.so.0.5600.4 [.] 0x0000000000049515
1.56% 0.03% 0.00% 0.04% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494b7
1.56% 0.01% 0.00% 0.00% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494ce
1.56% 0.00% 0.00% 0.00% mgen [kernel.kallsyms] [k] task_tick_fair
0.00% 0.15% 0.00% 0.04% perf [kernel.kallsyms] [k] smp_call_function_single
0.00% 0.13% 0.00% 6.08% swapper [kernel.kallsyms] [k] intel_idle
0.00% 0.03% 0.00% 0.00% gsd-color libglib-2.0.so.0.5600.4 [.] g_main_context_check
0.00% 0.03% 0.00% 0.00% swapper [kernel.kallsyms] [k] apic_timer_interrupt
0.00% 0.03% 0.00% 0.00% swapper [kernel.kallsyms] [k] check_preempt_curr
When user press hotkey '3' (event index, starting from 0), it indicates
to sort output by the forth event in group.
Samples: 12K of events 'cpu/instructions,period=2000003/, cpu/cpu-cycles,period=200003/, ...
Overhead Command Shared Object Symbol
92.19% 98.68% 0.00% 93.30% mgen mgen [.] LOOP1
0.00% 0.13% 0.00% 6.08% swapper [kernel.kallsyms] [k] intel_idle
3.12% 0.29% 0.00% 0.16% gsd-color libglib-2.0.so.0.5600.4 [.] 0x0000000000049515
0.00% 0.00% 0.00% 0.06% swapper [kernel.kallsyms] [k] hrtimer_start_range_ns
1.56% 0.03% 0.00% 0.04% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494b7
0.00% 0.15% 0.00% 0.04% perf [kernel.kallsyms] [k] smp_call_function_single
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] update_curr
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] apic_timer_interrupt
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] native_apic_msr_eoi_write
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] __update_load_avg_se
v6:
---
Jiri provided a good improvement to eliminate unneeded refresh.
This improvement is added to v6.
v2:
---
1. Report warning at helpline when index is invalid.
2. Report warning at helpline when it's not group event.
3. Use "case '0' ... '9'" to refine the code
4. Split K_RELOAD implementation to another patch.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200220013616.19916-4-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sometimes we may need to reload the browser to update the output since
some options are changed.
This patch creates a new key K_RELOAD. Once the __cmd_report() returns
K_RELOAD, it would repeat the whole process, such as, read samples from
data file, sort the data and display in the browser.
v5:
---
1. Fix the 'make NO_SLANG=1' error. Define K_RELOAD in util/hist.h.
2. Skip setup_sorting() in repeat path if last key is K_RELOAD.
v4:
---
Need to quit in perf_evsel_menu__run if key is K_RELOAD.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200220013616.19916-3-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When performing "perf report --group", it shows the event group
information together. By default, the output is sorted by the first
event in group.
It would be nice for user to select any event for sorting. This patch
introduces a new option "--group-sort-idx" to sort the output by the
event at the index n in event group.
For example,
Before:
# perf report --group --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 12K of events 'cpu/instructions,period=2000003/, cpu/cpu-cycles,period=200003/, BR_MISP_RETIRED.ALL_BRANCHES:pp, cpu/event=0xc0,umask=1,cmask=1,
# Event count (approx.): 6451235635
#
# Overhead Command Shared Object Symbol
# ................................ ......... ....................... ...................................
#
92.19% 98.68% 0.00% 93.30% mgen mgen [.] LOOP1
3.12% 0.29% 0.00% 0.16% gsd-color libglib-2.0.so.0.5600.4 [.] 0x0000000000049515
1.56% 0.03% 0.00% 0.04% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494b7
1.56% 0.01% 0.00% 0.00% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494ce
1.56% 0.00% 0.00% 0.00% mgen [kernel.kallsyms] [k] task_tick_fair
0.00% 0.15% 0.00% 0.04% perf [kernel.kallsyms] [k] smp_call_function_single
0.00% 0.13% 0.00% 6.08% swapper [kernel.kallsyms] [k] intel_idle
0.00% 0.03% 0.00% 0.00% gsd-color libglib-2.0.so.0.5600.4 [.] g_main_context_check
0.00% 0.03% 0.00% 0.00% swapper [kernel.kallsyms] [k] apic_timer_interrupt
...
After:
# perf report --group --stdio --group-sort-idx 3
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 12K of events 'cpu/instructions,period=2000003/, cpu/cpu-cycles,period=200003/, BR_MISP_RETIRED.ALL_BRANCHES:pp, cpu/event=0xc0,umask=1,cmask=1,
# Event count (approx.): 6451235635
#
# Overhead Command Shared Object Symbol
# ................................ ......... ....................... ...................................
#
92.19% 98.68% 0.00% 93.30% mgen mgen [.] LOOP1
0.00% 0.13% 0.00% 6.08% swapper [kernel.kallsyms] [k] intel_idle
3.12% 0.29% 0.00% 0.16% gsd-color libglib-2.0.so.0.5600.4 [.] 0x0000000000049515
0.00% 0.00% 0.00% 0.06% swapper [kernel.kallsyms] [k] hrtimer_start_range_ns
1.56% 0.03% 0.00% 0.04% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494b7
0.00% 0.15% 0.00% 0.04% perf [kernel.kallsyms] [k] smp_call_function_single
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] update_curr
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] apic_timer_interrupt
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] native_apic_msr_eoi_write
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] __update_load_avg_se
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] scheduler_tick
Now the output is sorted by the fourth event in group.
v7:
---
Rebase to latest perf/core, no other change.
v4:
---
1. Update Documentation/perf-report.txt to mention
'--group-sort-idx' support multiple groups with different
amount of events and it should be used on grouped events.
2. Update __hpp__group_sort_idx(), just return when the
idx is out of limit.
3. Return failure on symbol_conf.group_sort_idx && !session->evlist->nr_groups.
So now we don't need to use together with --group.
v3:
---
Refine the code in __hpp__group_sort_idx().
Before:
for (i = 1; i < nr_members; i++) {
if (i == idx) {
ret = field_cmp(fields_a[i], fields_b[i]);
if (ret)
goto out;
}
}
After:
if (idx >= 1 && idx < nr_members) {
ret = field_cmp(fields_a[idx], fields_b[idx]);
if (ret)
goto out;
}
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200220013616.19916-2-yao.jin@linux.intel.com
[ Renamed pair_fields_alloc() to hist_entry__new_pair() and combined decl + assignment of vars ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In previous patch, we have supported the annotation functionality even
without symbols.
For this patch, it supports the hotkey 'a' on address in report view.
Note that, for branch mode, we only support the annotation for "branch
to" address.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200227043939.4403-4-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For perf report on stripped binaries it is currently impossible to do
annotation. The annotation state is all tied to symbols, but there are
either no symbols, or symbols are not covering all the code.
We should support the annotation functionality even without symbols.
This patch fakes a symbol and the symbol name is the string of address.
After that, we just follow current annotation working flow.
For example,
1. perf report
Overhead Command Shared Object Symbol
20.67% div libc-2.27.so [.] __random_r
17.29% div libc-2.27.so [.] __random
10.59% div div [.] 0x0000000000000628
9.25% div div [.] 0x0000000000000612
6.11% div div [.] 0x0000000000000645
2. Select the line of "10.59% div div [.] 0x0000000000000628" and ENTER.
Annotate 0x0000000000000628
Zoom into div thread
Zoom into div DSO (use the 'k' hotkey to zoom directly into the kernel)
Browse map details
Run scripts for samples of symbol [0x0000000000000628]
Run scripts for all samples
Switch to another data file in PWD
Exit
3. Select the "Annotate 0x0000000000000628" and ENTER.
Percent│
│
│
│ Disassembly of section .text:
│
│ 0000000000000628 <.text+0x68>:
│ divsd %xmm4,%xmm0
│ divsd %xmm3,%xmm1
│ movsd (%rsp),%xmm2
│ addsd %xmm1,%xmm0
│ addsd %xmm2,%xmm0
│ movsd %xmm0,(%rsp)
Now we can see the dump of object starting from 0x628.
v5:
---
Remove the hotkey 'a' implementation from this patch. It
will be moved to a separate patch.
v4:
---
1. Support the hotkey 'a'. When we press 'a' on address,
now it supports the annotation.
2. Change the patch title from
"Support interactive annotation of code without symbols" to
"perf report: Support interactive annotation of code without symbols"
v3:
---
Keep just the ANNOTATION_DUMMY_LEN, and remove the
opts->annotate_dummy_len since it's the "maybe in future
we will provide" feature.
v2:
---
Fix a crash issue when annotating an address in "unknown" object.
The steps to reproduce this issue:
perf record -e cycles:u ls
perf report
75.29% ls ld-2.27.so [.] do_lookup_x
23.64% ls ld-2.27.so [.] __GI___tunables_init
1.04% ls [unknown] [k] 0xffffffff85c01210
0.03% ls ld-2.27.so [.] _start
When annotating 0xffffffff85c01210, the crash happens.
v2 adds checking for ms->map in add_annotate_opt(). If the object is
"unknown", ms->map is NULL.
Committer notes:
Renamed new_annotate_sym() to symbol__new_unresolved().
Use PRIx64 to fix this issue in some 32-bit arches:
ui/browsers/hists.c: In function 'symbol__new_unresolved':
ui/browsers/hists.c:2474:38: error: format '%lx' expects argument of type 'long unsigned int', but argument 5 has type 'u64' {aka 'long long unsigned int'} [-Werror=format=]
snprintf(name, sizeof(name), "%-#.*lx", BITS_PER_LONG / 4, addr);
~~~~~~^ ~~~~
%-#.*llx
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200227043939.4403-3-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull RCU changes from Paul E. McKenney:
- Make kfree_rcu() use kfree_bulk() for added performance
- RCU updates
- Callback-overload handling updates
- Tasks-RCU KCSAN and sparse updates
- Locking torture test and RCU torture test updates
- Documentation updates
- Miscellaneous fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add missing Makefile for net/forwarding tests and include it to
the targets list, otherwise forwarding tests are not installed
in case of cross-compilation.
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
The kunit.py utility builds an ARCH=um kernel and then runs it. Add
optional --make_options flag to kunit.py allowing for the operator to
specify extra build options.
This allows use of the clang compiler for kunit:
tools/testing/kunit/kunit.py run --defconfig \
--make_options CC=clang --make_options HOSTCC=clang
Signed-off-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: David Gow <davidgow@google.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
To reduce the reliance of trace samples (trace*_user) on bpf_load,
move read_trace_pipe to trace_helpers. By moving this bpf_loader helper
elsewhere, trace functions can be easily migrated to libbbpf.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200321100424.1593964-2-danieltimlee@gmail.com
This patch adds test to exercise the bpf_sk_storage_get()
and bpf_sk_storage_delete() helper from the bpf_dctcp.c.
The setup and check on the sk_storage is done immediately
before and after the connect().
This patch also takes this chance to move the pthread_create()
after the connect() has been done. That will remove the need of
the "wait_thread" label.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200320152107.2169904-1-kafai@fb.com
Add an alternative format that can be more easily used for further
processing later on.
Note that we add a timestamp in the first column for both, the regular
and the new csv format.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Message-Id: <20200306114250.57585-5-raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This now controls both, the refresh rate of the interactive mode as well
as the logging mode. Which, as a consequence, means that the default of
logging mode is now 3s, too (use command line switch '-s' to adjust to
your liking).
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Message-Id: <20200306114250.57585-4-raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
optparse is deprecated for a while, hence switching over to argparse
(which also works with python2).
As a consequence, help output has some subtle changes, the most
significant one being that the options are all listed explicitly
instead of a universal '[options]' indicator. Also, some of the error
messages are phrased slightly different.
While at it, squashed a number of minor PEP8 issues.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Message-Id: <20200306114250.57585-3-raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make sure command line arguments are sorted alphabetically
everywhere, and adjusted existing texts for interactive command 's' to
become consistent with the long form --set-delay.
Throwing in some PEP8 fixes (all cosmetics) for good measure.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Message-Id: <20200306114250.57585-2-raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After copying Arm64's perf archive with object files and perf.data file
to x86 laptop, the x86's perf kernel symbol resolution fails. It
outputs 'unknown' for all symbols parsing.
This issue is root caused by the function elf__needs_adjust_symbols(),
x86 perf tool uses one weak version, Arm64 (and powerpc) has rewritten
their own version. elf__needs_adjust_symbols() decides if need to parse
symbols with the relative offset address; but x86 building uses the weak
function which misses to check for the elf type 'ET_DYN', so that it
cannot parse symbols in Arm DSOs due to the wrong result from
elf__needs_adjust_symbols().
The DSO parsing should not depend on any specific architecture perf
building; e.g. x86 perf tool can parse Arm and Arm64 DSOs, vice versa.
And confirmed by Naveen N. Rao that powerpc64 kernels are not being
built as ET_DYN anymore and change to ET_EXEC.
This patch removes the arch specific functions for Arm64 and powerpc and
changes elf__needs_adjust_symbols() as a common function.
In the common elf__needs_adjust_symbols(), it checks an extra condition
'ET_DYN' for elf header type. With this fixing, the Arm64 DSO can be
parsed properly with x86's perf tool.
Before:
# perf script
main 3258 1 branches: 0 [unknown] ([unknown]) => ffff800010c4665c [unknown] ([kernel.kallsyms])
main 3258 1 branches: ffff800010c46670 [unknown] ([kernel.kallsyms]) => ffff800010c4eaec [unknown] ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eaec [unknown] ([kernel.kallsyms]) => ffff800010c4eb00 [unknown] ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eb08 [unknown] ([kernel.kallsyms]) => ffff800010c4e780 [unknown] ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4e7a0 [unknown] ([kernel.kallsyms]) => ffff800010c4eeac [unknown] ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eebc [unknown] ([kernel.kallsyms]) => ffff800010c4ed80 [unknown] ([kernel.kallsyms])
After:
# perf script
main 3258 1 branches: 0 [unknown] ([unknown]) => ffff800010c4665c coresight_timeout+0x54 ([kernel.kallsyms])
main 3258 1 branches: ffff800010c46670 coresight_timeout+0x68 ([kernel.kallsyms]) => ffff800010c4eaec etm4_enable_hw+0x3cc ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eaec etm4_enable_hw+0x3cc ([kernel.kallsyms]) => ffff800010c4eb00 etm4_enable_hw+0x3e0 ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eb08 etm4_enable_hw+0x3e8 ([kernel.kallsyms]) => ffff800010c4e780 etm4_enable_hw+0x60 ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4e7a0 etm4_enable_hw+0x80 ([kernel.kallsyms]) => ffff800010c4eeac etm4_enable+0x2d4 ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eebc etm4_enable+0x2e4 ([kernel.kallsyms]) => ffff800010c4ed80 etm4_enable+0x1a8 ([kernel.kallsyms])
v3: Changed to check for ET_DYN across all architectures.
v2: Fixed Arm64 and powerpc native building.
Reported-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Enrico Weigelt <info@metux.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lore.kernel.org/lkml/20200306015759.10084-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reproducible with a clang asan build and then running perf test in
particular 'Parse event definition strings'.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20200314170356.62914-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Handy for testing with distro kernels.
Warn that the resulting module is completely unsupported,
and isn't intended for production use.
Usage:
make oot # builds vhost_test.ko, vhost.ko
make oot-clean # cleans out files created
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Many systems build/test up-to-date kernels with older libcs, and
an older glibc (2.17) lacks the definition of SOL_DCCP in
/usr/include/bits/socket.h (it was added in the 4.6 timeframe).
Adding the definition to the test program avoids a compilation
failure that gets in the way of building tools/testing/selftests/net.
The test itself will work once the definition is added; either
skipping due to DCCP not being configured in the kernel under test
or passing, so there are no other more up-to-date glibc dependencies
here it seems beyond that missing definition.
Fixes: 11fb60d108 ("selftests: net: reuseport_addr_any: add DCCP")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Statistics on timestamps is useful to quantify average and tail latency.
Print timestamp statistics in count/avg/min/max format.
Signed-off-by: Jian Yang <jianyang@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the following new flags:
-e: use level-triggered epoll() instead of poll().
-E: use event-triggered epoll() instead of poll().
Signed-off-by: Jian Yang <jianyang@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A longer sleep duration between sendmsg()s makes more cachelines to be
evicted and results in higher latency. Making the duration configurable.
Add the following new flags:
-S: Configurable sleep duration.
-b: Busy loop instead of poll().
Remove the following flag:
-D: No delay between packets: subsumed by -S.
Signed-off-by: Jian Yang <jianyang@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Txtimestamp reports latencies in uses resolution, while nsec is needed
in cases such as measuring latencies on localhost.
Add the following new flag:
-N: print timestamps and durations in nsec (instead of usec)
Signed-off-by: Jian Yang <jianyang@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The wrapper script txtimestamp.sh executes a pre-defined list of testcases
sequentially without configuration options available.
Add an option (-r/--run) to setup the test namespace and pass remaining
arguments to txtimestamp binary. The script still runs all tests when no
argument is passed.
Signed-off-by: Jian Yang <jianyang@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Continue what commit:
d820ac4c2f ("locking: rename trace_softirq_[enter|exit] => lockdep_softirq_[enter|exit]")
started, rename these to avoid confusing them with tracepoints.
git grep -l "trace_\(soft\|hard\)\(irq_context\|irqs_enabled\)" | while read file;
do
sed -ie 's/trace_\(soft\|hard\)\(irq_context\|irqs_enabled\)/lockdep_\1\2/g' $file;
done
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20200320115859.178626842@infradead.org
Continue what commit:
d820ac4c2f ("locking: rename trace_softirq_[enter|exit] => lockdep_softirq_[enter|exit]")
started, rename these to avoid confusing them with tracepoints.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20200320115859.060481361@infradead.org
Implemented the functionality to run all KUnit tests through kunit_tool
by specifying an --alltests flag, which builds UML with allyesconfig
enabled, and consequently runs every KUnit test. A new function was
added to kunit_kernel: make_allyesconfig.
Firstly, if --alltests is specified, kunit.py triggers build_um_kernel
which call make_allyesconfig. This function calls the make command,
disables the broken configs that would otherwise prevent UML from
building, then starts the kernel with all possible configurations
enabled. All stdout and stderr is sent to test.log and read from there
then fed through kunit_parser to parse the tests to the user. Also added
a signal_handler in case kunit is interrupted while running.
Tested: Run under different conditions such as testing with
--raw_output, testing program interrupt then immediately running kunit
again without --alltests and making sure to clean the console.
Signed-off-by: Heidi Fahim <heidifahim@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Previously, kunit_parser did not properly handle kunit TAP output that
- had any prefixes (generated from different configs e.g.
CONFIG_PRINTK_TIME)
- had unrelated kernel output mixed in the middle of
it, which has shown up when testing with allyesconfig
To remove prefixes, the parser looks for the first line that includes
TAP output, "TAP version 14". It then determines the length of the
string before this sequence, and strips that number of characters off
the beginning of the following lines until the last KUnit output line is
reached.
These fixes have been tested with additional tests in the
KUnitParseTest and their associated logs have also been added.
Signed-off-by: Heidi Fahim <heidifahim@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Clang's -Wmisleading-indentation warns about misleading indentations if
there's a mixture of spaces and tabs. Remove extraneous spaces.
Signed-off-by: Bill Wendling <morbo@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200320201510.217169-1-morbo@google.com
This patch adds struct_ops support to the bpftool.
To recap a bit on the recent bpf_struct_ops feature on the kernel side:
It currently supports "struct tcp_congestion_ops" to be implemented
in bpf. At a high level, bpf_struct_ops is struct_ops map populated
with a number of bpf progs. bpf_struct_ops currently supports the
"struct tcp_congestion_ops". However, the bpf_struct_ops design is
generic enough that other kernel struct ops can be supported in
the future.
Although struct_ops is map+progs at a high lever, there are differences
in details. For example,
1) After registering a struct_ops, the struct_ops is held by the kernel
subsystem (e.g. tcp-cc). Thus, there is no need to pin a
struct_ops map or its progs in order to keep them around.
2) To iterate all struct_ops in a system, it iterates all maps
in type BPF_MAP_TYPE_STRUCT_OPS. BPF_MAP_TYPE_STRUCT_OPS is
the current usual filter. In the future, it may need to
filter by other struct_ops specific properties. e.g. filter by
tcp_congestion_ops or other kernel subsystem ops in the future.
3) struct_ops requires the running kernel having BTF info. That allows
more flexibility in handling other kernel structs. e.g. it can
always dump the latest bpf_map_info.
4) Also, "struct_ops" command is not intended to repeat all features
already provided by "map" or "prog". For example, if there really
is a need to pin the struct_ops map, the user can use the "map" cmd
to do that.
While the first attempt was to reuse parts from map/prog.c, it ended up
not a lot to share. The only obvious item is the map_parse_fds() but
that still requires modifications to accommodate struct_ops map specific
filtering (for the immediate and the future needs). Together with the
earlier mentioned differences, it is better to part away from map/prog.c.
The initial set of subcmds are, register, unregister, show, and dump.
For register, it registers all struct_ops maps that can be found in an
obj file. Option can be added in the future to specify a particular
struct_ops map. Also, the common bpf_tcp_cc is stateless (e.g.
bpf_cubic.c and bpf_dctcp.c). The "reuse map" feature is not
implemented in this patch and it can be considered later also.
For other subcmds, please see the man doc for details.
A sample output of dump:
[root@arch-fb-vm1 bpf]# bpftool struct_ops dump name cubic
[{
"bpf_map_info": {
"type": 26,
"id": 64,
"key_size": 4,
"value_size": 256,
"max_entries": 1,
"map_flags": 0,
"name": "cubic",
"ifindex": 0,
"btf_vmlinux_value_type_id": 18452,
"netns_dev": 0,
"netns_ino": 0,
"btf_id": 52,
"btf_key_type_id": 0,
"btf_value_type_id": 0
}
},{
"bpf_struct_ops_tcp_congestion_ops": {
"refcnt": {
"refs": {
"counter": 1
}
},
"state": "BPF_STRUCT_OPS_STATE_INUSE",
"data": {
"list": {
"next": 0,
"prev": 0
},
"key": 0,
"flags": 0,
"init": "void (struct sock *) bictcp_init/prog_id:138",
"release": "void (struct sock *) 0",
"ssthresh": "u32 (struct sock *) bictcp_recalc_ssthresh/prog_id:141",
"cong_avoid": "void (struct sock *, u32, u32) bictcp_cong_avoid/prog_id:140",
"set_state": "void (struct sock *, u8) bictcp_state/prog_id:142",
"cwnd_event": "void (struct sock *, enum tcp_ca_event) bictcp_cwnd_event/prog_id:139",
"in_ack_event": "void (struct sock *, u32) 0",
"undo_cwnd": "u32 (struct sock *) tcp_reno_undo_cwnd/prog_id:144",
"pkts_acked": "void (struct sock *, const struct ack_sample *) bictcp_acked/prog_id:143",
"min_tso_segs": "u32 (struct sock *) 0",
"sndbuf_expand": "u32 (struct sock *) 0",
"cong_control": "void (struct sock *, const struct rate_sample *) 0",
"get_info": "size_t (struct sock *, u32, int *, union tcp_cc_info *) 0",
"name": "bpf_cubic",
"owner": 0
}
}
}
]
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200318171656.129650-1-kafai@fb.com
The kernel struct_ops obj has kernel's func ptrs implemented by bpf_progs.
The bpf prog_id is stored as the value of the func ptr for introspection
purpose. In the latter patch, a struct_ops dump subcmd will be added
to introspect these func ptrs. It is desired to print the actual bpf
prog_name instead of only printing the prog_id.
Since struct_ops is the only usecase storing prog_id in the func ptr,
this patch adds a prog_id_as_func_ptr bool (default is false) to
"struct btf_dumper" in order not to mis-interpret the ptr value
for the other existing use-cases.
While printing a func_ptr as a bpf prog_name,
this patch also prefix the bpf prog_name with the ptr's func_proto.
[ Note that it is the ptr's func_proto instead of the bpf prog's
func_proto ]
It reuses the current btf_dump_func() to obtain the ptr's func_proto
string.
Here is an example from the bpf_cubic.c:
"void (struct sock *, u32, u32) bictcp_cong_avoid/prog_id:140"
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200318171650.129252-1-kafai@fb.com
A char[] is currently printed as an integer array.
This patch will print it as a string when
1) The array element type is an one byte int
2) The array element type has a BTF_INT_CHAR encoding or
the array element type's name is "char"
3) All characters is between (0x1f, 0x7f) and it is terminated
by a null character.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200318171643.129021-1-kafai@fb.com
This patch prints the enum's name if there is one found in
the array of btf_enum.
The commit 9eea984979 ("bpf: fix BTF verification of enums")
has details about an enum could have any power-of-2 size (up to 8 bytes).
This patch also takes this chance to accommodate these non 4 byte
enums.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200318171637.128862-1-kafai@fb.com
Add tests cases for checking the new firmware_request_platform api.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20200115163554.101315-7-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fix a spelling typo in error message.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fair number of changes including bug fixes done to change version.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
For platforms where multiple packages/die, this makes "Package-" key
duplicate. To make unique, add die and cpu id to key name.
So "Package-0" key name will change to "Package-0-die-x:cpu-x".
For example:
$sudo ./intel-speed-select -f json perf-profile info
Intel(R) Speed Select Technology
Executing on CPU model:106[0x6a]
{
"package-0:die-0:cpu-0": {
"perf-profile-level-0": {
"cpu-count": "32",
"enable-cpu-count": "32",
...
...
"package-1:die-0:cpu-16": {
"perf-profile-level-0": {
"cpu-count": "32",
"enable-cpu-count": "32",
"enable-cpu-mask": "ffff0000,ffff0000",
...
...
For non json format, there is no change. Here when print_package_info()
is called, it will return the level to print for other information.
This level is used formatting. Also in some function duplicate code
was there to print package,die and CPU information. Replace all that
code with a call to print_package_info().
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
In addition to total CPU count also display "enabled-cpu-count" for
perf-profile info command. This will show number of CPUs in the
"enable-cpu-mask".
For example:
perf-profile-level-4
cpu-count:32
enable-cpu-count:16
enable-cpu-mask:e42d0000,e42d0000
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When user specifies invalid option, display "Unknown Option: ignore",
instead of "no match". Also display error for garbage on the command
line.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Specifying "avx2" and "avx512" option for display filter doesn't work
with short option "-r", only works with --try-type. Also compare full
6 characters for "avx512" string.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
CLX doesn't have capability to change the feature in the hardware, but
this acts as "--auto | -a" option. So even if user didn't specify the
option, use this as --auto | -a to set cpufreq scaling frequency limits.
Also remove perror with debug_printf as they don't bring any value.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When --cpu or -c is used to specify target CPUs and non of them are valid,
display error.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This change adds improved error display and handling for commands related
to core-power feature. The changes include:
- Replace perror with helpful error message
- Use ordered priority for SKX based platform by default as the
proportional priority is not supported
- Don't show weight and epp in help and also give error when user
tries to set them in SKX based platforms
- Range check for epp and weights and display error
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Treat a case when mailbox/mmio command can't be handled by the kernel
drivers when the module is removed or send a command which no driver can
handle. In this case ENOTTY result is returned, so print error.
Also when the isst_if_mmio module is removed, we can't send CLOS message
messages via Mailbox on non SKX based platforms. When this module is
removed, isst_platform_info.mmio_supported is set to 0. So it can't be
used as a condition to send via mailbox. Here replace check for Skylake
based platform to send via mailbox, other platforms can't use mailbox in
lieu of MMIO.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This change adds improved error display and handling for commands related
to turbo-freq feature. The changes include:
- Replace perror/fprintf with helpful error message
- Error for not specifying TDP level when required
- Show error for invalid bucket number
- Show message to enable core-power before enabling turbo-freq feature
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This change adds improved error display and handling for commands related
to base-freq feature. The changes include:
- Replace perror/fprintf with helpful error message
- Error for not specifying TDP level when required
- For CLX show help which shows limitation
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Improve output of perf-profile commands:
get-config-enabled
get-lock-status
Instead of showing 0/1, show meaningful strings. Also show error when
command is failed.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Enhance help to specify CPU and clos by an example.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When priority type for core-power enable command is anything more than 1
display error before change to 1, which is ordered priority.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Before looking for information about the base-freq or turbo-freq details,
first check if the feature is supported at that level. If not print error
and return.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This change adds improved error display and handling for commands related
to perf-profile feature. The changes include:
- When invalid TDP level is passed. display error and exit
- Replace perror with helpful error message
- Show error when TDP level can't be set
- Print error when information can't be read for a level
- Validate user options for invalid level
- Display error for TDP lock status
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add a common API which can be used to print all error and information
messages. In this way a common format can be used.
For json output an error index in suffixed to make unique error key.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add additional information, which will allow user to detect available
features. This will allow users to check presence of features before
continue to test.
A sample output:
$sudo ./intel-speed-select --info
Intel(R) Speed Select Technology
Executing on CPU model:85[0x55]
Platform: API version : 1
Platform: Driver version : 1
Platform: mbox supported : 1
Platform: mmio supported : 0
Intel(R) SST-PP (feature perf-profile) is not supported
Only performance level 0 (base level) is present
TDP level change control is locked
Intel(R) SST-TF (feature turbo-freq) is supported
Intel(R) SST-BF (feature base-freq) is supported
Intel(R) SST-CP (feature core-power) is supported
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Enhance help message which adds some example. The changes include:
- Print help when options are not recognized.
- For CLX, display only options which are applicable.
- Sort options in alphatical order.
- Disply help() instead of error:
"Feature name and|or command not specified"
- Remove duplicate display of
Intel(R) Speed Select Technology
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When the device file "/dev/isst_interface" is not present, instead of
failing on access, check at the start and print a helpful warning.
Here CLX platform is an exception, which doesn't depend on the device
file. So continue for CLX platform.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
KP Singh