mirror of https://gitee.com/openkylin/linux.git
24247 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Linus Torvalds
|
4c3de7e5bf |
Merge branch 'stable-4.11' of git://git.infradead.org/users/pcmoore/audit
Pull audit fix from Paul Moore: "We've got an audit fix, and unfortunately it is big. While I'm not excited that we need to be sending you something this large during the -rcX phase, it does fix some very real, and very tangled, problems relating to locking, backlog queues, and the audit daemon connection. This code has passed our testsuite without problem and it has held up to my ad-hoc stress tests (arguably better than the existing code), please consider pulling this as fix for the next v4.11-rcX tag" * 'stable-4.11' of git://git.infradead.org/users/pcmoore/audit: audit: fix auditd/kernel connection state tracking |
|
|
Linus Torvalds
|
ebe64824e9 |
Power management fixes for v4.11-rc4
- Make intel_pstate use one set of global P-state limits in the
active mode regardless of the scaling_governor settings for
individual CPUs instead of switching back and forth between two
of them in a way that is hard to control (Rafael Wysocki).
- Drop a useless function from intel_pstate to prevent it from
modifying the maximum supported frequency value unexpectedly
which may confuse the cpufreq core (Rafael Wysocki).
- Fix the cpufreq core to restore policy limits on CPU online so
that the limits are not reset over system suspend/resume, among
other things (Viresh Kumar).
- Fix the initialization of the schedutil cpufreq governor to
make the IO-wait boosting mechanism in it actually work on
systems with one CPU per cpufreq policy (Rafael Wysocki).
- Add a sanity check to the cpuidle core to prevent crashes from
happening if the architecture code initialization fails to set
up things as expected (Vaidyanathan Srinivasan).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=jy4C
-----END PGP SIGNATURE-----
Merge tag 'pm-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"One of these is an intel_pstate regression fix and it is not a small
change, but it mostly removes code that shouldn't be there. That code
was acquired by mistake and has been a source of constant pain since
then, so the time has come to get rid of it finally. We have not seen
problems with this change in the lab, so fingers crossed.
The rest is more usual: one more intel_pstate commit removing useless
code, a cpufreq core fix to make it restore policy limits on CPU
online (which prevents the limits from being reset over system
suspend/resume), a schedutil cpufreq governor initialization fix to
make it actually work as advertised on all systems and an extra sanity
check in the cpuidle core to prevent crashes from happening if the
arch code messes things up.
Specifics:
- Make intel_pstate use one set of global P-state limits in the
active mode regardless of the scaling_governor settings for
individual CPUs instead of switching back and forth between two of
them in a way that is hard to control (Rafael Wysocki).
- Drop a useless function from intel_pstate to prevent it from
modifying the maximum supported frequency value unexpectedly which
may confuse the cpufreq core (Rafael Wysocki).
- Fix the cpufreq core to restore policy limits on CPU online so that
the limits are not reset over system suspend/resume, among other
things (Viresh Kumar).
- Fix the initialization of the schedutil cpufreq governor to make
the IO-wait boosting mechanism in it actually work on systems with
one CPU per cpufreq policy (Rafael Wysocki).
- Add a sanity check to the cpuidle core to prevent crashes from
happening if the architecture code initialization fails to set up
things as expected (Vaidyanathan Srinivasan)"
* tag 'pm-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Restore policy min/max limits on CPU online
cpuidle: Validate cpu_dev in cpuidle_add_sysfs()
cpufreq: intel_pstate: Fix policy data management in passive mode
cpufreq: schedutil: Fix per-CPU structure initialization in sugov_start()
cpufreq: intel_pstate: One set of global limits in active mode
|
|
|
Linus Torvalds
|
f341d9f08a |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Several netfilter fixes from Pablo and the crew:
- Handle fragmented packets properly in netfilter conntrack, from
Florian Westphal.
- Fix SCTP ICMP packet handling, from Ying Xue.
- Fix big-endian bug in nftables, from Liping Zhang.
- Fix alignment of fake conntrack entry, from Steven Rostedt.
2) Fix feature flags setting in fjes driver, from Taku Izumi.
3) Openvswitch ipv6 tunnel source address not set properly, from Or
Gerlitz.
4) Fix jumbo MTU handling in amd-xgbe driver, from Thomas Lendacky.
5) sk->sk_frag.page not released properly in some cases, from Eric
Dumazet.
6) Fix RTNL deadlocks in nl80211, from Johannes Berg.
7) Fix erroneous RTNL lockdep splat in crypto, from Herbert Xu.
8) Cure improper inflight handling during AF_UNIX GC, from Andrey
Ulanov.
9) sch_dsmark doesn't write to packet headers properly, from Eric
Dumazet.
10) Fix SCM_TIMESTAMPING_OPT_STATS handling in TCP, from Soheil Hassas
Yeganeh.
11) Add some IDs for Motorola qmi_wwan chips, from Tony Lindgren.
12) Fix nametbl deadlock in tipc, from Ying Xue.
13) GRO and LRO packets not counted correctly in mlx5 driver, from Gal
Pressman.
14) Fix reset of internal PHYs in bcmgenet, from Doug Berger.
15) Fix hashmap allocation handling, from Alexei Starovoitov.
16) nl_fib_input() needs stronger netlink message length checking, from
Eric Dumazet.
17) Fix double-free of sk->sk_filter during sock clone, from Daniel
Borkmann.
18) Fix RX checksum offloading in aquantia driver, from Pavel Belous.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (85 commits)
net:ethernet:aquantia: Fix for RX checksum offload.
amd-xgbe: Fix the ECC-related bit position definitions
sfc: cleanup a condition in efx_udp_tunnel_del()
Bluetooth: btqcomsmd: fix compile-test dependency
inet: frag: release spinlock before calling icmp_send()
tcp: initialize icsk_ack.lrcvtime at session start time
genetlink: fix counting regression on ctrl_dumpfamily()
socket, bpf: fix sk_filter use after free in sk_clone_lock
ipv4: provide stronger user input validation in nl_fib_input()
bpf: fix hashmap extra_elems logic
enic: update enic maintainers
net: bcmgenet: remove bcmgenet_internal_phy_setup()
ipv6: make sure to initialize sockc.tsflags before first use
fjes: Do not load fjes driver if extended socket device is not power on.
fjes: Do not load fjes driver if system does not have extended socket device.
net/mlx5e: Count LRO packets correctly
net/mlx5e: Count GSO packets correctly
net/mlx5: Increase number of max QPs in default profile
net/mlx5e: Avoid supporting udp tunnel port ndo for VF reps
net/mlx5e: Use the proper UAPI values when offloading TC vlan actions
...
|
|
|
Alexei Starovoitov
|
8c290e60fa |
bpf: fix hashmap extra_elems logic
In both kmalloc and prealloc mode the bpf_map_update_elem() is using per-cpu extra_elems to do atomic update when the map is full. There are two issues with it. The logic can be misused, since it allows max_entries+num_cpus elements to be present in the map. And alloc_extra_elems() at map creation time can fail percpu alloc for large map values with a warn: WARNING: CPU: 3 PID: 2752 at ../mm/percpu.c:892 pcpu_alloc+0x119/0xa60 illegal size (32824) or align (8) for percpu allocation The fixes for both of these issues are different for kmalloc and prealloc modes. For prealloc mode allocate extra num_possible_cpus elements and store their pointers into extra_elems array instead of actual elements. Hence we can use these hidden(spare) elements not only when the map is full but during bpf_map_update_elem() that replaces existing element too. That also improves performance, since pcpu_freelist_pop/push is avoided. Unfortunately this approach cannot be used for kmalloc mode which needs to kfree elements after rcu grace period. Therefore switch it back to normal kmalloc even when full and old element exists like it was prior to commit |
|
|
Paul Moore
|
5b52330bbf |
audit: fix auditd/kernel connection state tracking
What started as a rather straightforward race condition reported by Dmitry using the syzkaller fuzzer ended up revealing some major problems with how the audit subsystem managed its netlink sockets and its connection with the userspace audit daemon. Fixing this properly had quite the cascading effect and what we are left with is this rather large and complicated patch. My initial goal was to try and decompose this patch into multiple smaller patches, but the way these changes are intertwined makes it difficult to split these changes into meaningful pieces that don't break or somehow make things worse for the intermediate states. The patch makes a number of changes, but the most significant are highlighted below: * The auditd tracking variables, e.g. audit_sock, are now gone and replaced by a RCU/spin_lock protected variable auditd_conn which is a structure containing all of the auditd tracking information. * We no longer track the auditd sock directly, instead we track it via the network namespace in which it resides and we use the audit socket associated with that namespace. In spirit, this is what the code was trying to do prior to this patch (at least I think that is what the original authors intended), but it was done rather poorly and added a layer of obfuscation that only masked the underlying problems. * Big backlog queue cleanup, again. In v4.10 we made some pretty big changes to how the audit backlog queues work, here we haven't changed the queue design so much as cleaned up the implementation. Brought about by the locking changes, we've simplified kauditd_thread() quite a bit by consolidating the queue handling into a new helper function, kauditd_send_queue(), which allows us to eliminate a lot of very similar code and makes the looping logic in kauditd_thread() clearer. * All netlink messages sent to auditd are now sent via auditd_send_unicast_skb(). Other than just making sense, this makes the lock handling easier. * Change the audit_log_start() sleep behavior so that we never sleep on auditd events (unchanged) or if the caller is holding the audit_cmd_mutex (changed). Previously we didn't sleep if the caller was auditd or if the message type fell between a certain range; the type check was a poor effort of doing what the cmd_mutex check now does. Richard Guy Briggs originally proposed not sleeping the cmd_mutex owner several years ago but his patch wasn't acceptable at the time. At least the idea lives on here. * A problem with the lost record counter has been resolved. Steve Grubb and I both happened to notice this problem and according to some quick testing by Steve, this problem goes back quite some time. It's largely a harmless problem, although it may have left some careful sysadmins quite puzzled. Cc: <stable@vger.kernel.org> # 4.10.x- Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Paul Moore <paul@paul-moore.com> |
|
|
Rafael J. Wysocki
|
4296f23ed4 |
cpufreq: schedutil: Fix per-CPU structure initialization in sugov_start()
sugov_start() only initializes struct sugov_cpu per-CPU structures
for shared policies, but it should do that for single-CPU policies too.
That in particular makes the IO-wait boost mechanism work in the
cases when cpufreq policies correspond to individual CPUs.
Fixes:
|
|
|
Linus Torvalds
|
3e51f893de |
Merge branch 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug fix from Thomas Gleixner: "A single fix preventing the concurrent execution of the CPU hotplug callback install/invocation machinery. Long standing bug caused by a massive brain slip of that Gleixner dude, which went unnoticed for almost a year" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Serialize callback invocations proper |
|
|
Linus Torvalds
|
a7fc726bb2 |
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"A set of perf related fixes:
- fix a CR4.PCE propagation issue caused by usage of mm instead of
active_mm and therefore propagated the wrong value.
- perf core fixes, which plug a use-after-free issue and make the
event inheritance on fork more robust.
- a tooling fix for symbol handling"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf symbols: Fix symbols__fixup_end heuristic for corner cases
x86/perf: Clarify why x86_pmu_event_mapped() isn't racy
x86/perf: Fix CR4.PCE propagation to use active_mm instead of mm
perf/core: Better explain the inherit magic
perf/core: Simplify perf_event_free_task()
perf/core: Fix event inheritance on fork()
perf/core: Fix use-after-free in perf_release()
|
|
|
Linus Torvalds
|
cd21debe53 |
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"From the scheduler departement:
- a bunch of sched deadline related fixes which deal with various
buglets and corner cases.
- two fixes for the loadavg spikes which are caused by the delayed
NOHZ accounting"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Use deadline instead of period when calculating overflow
sched/deadline: Throttle a constrained deadline task activated after the deadline
sched/deadline: Make sure the replenishment timer fires in the next period
sched/loadavg: Use {READ,WRITE}_ONCE() for sample window
sched/loadavg: Avoid loadavg spikes caused by delayed NO_HZ accounting
sched/deadline: Add missing update_rq_clock() in dl_task_timer()
|
|
|
Linus Torvalds
|
b5f13082b1 |
Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"Three fixes related to locking:
- fix a SIGKILL issue for RWSEM_GENERIC_SPINLOCK which has been fixed
for the XCHGADD variant already
- plug a potential use after free in the futex code
- prevent leaking a held spinlock in an futex error handling code
path"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwsem: Fix down_write_killable() for CONFIG_RWSEM_GENERIC_SPINLOCK=y
futex: Add missing error handling to FUTEX_REQUEUE_PI
futex: Fix potential use-after-free in FUTEX_REQUEUE_PI
|
|
|
Heiko Carstens
|
55adc1d05d |
mm: add private lock to serialize memory hotplug operations
Commit |
|
|
Peter Zijlstra
|
d8a8cfc769 |
perf/core: Better explain the inherit magic
While going through the event inheritance code Oleg got confused. Add some comments to better explain the silent dissapearance of orphaned events. So what happens is that at perf_event_release_kernel() time; when an event looses its connection to userspace (and ceases to exist from the user's perspective) we can still have an arbitrary amount of inherited copies of the event. We want to synchronously find and remove all these child events. Since that requires a bit of lock juggling, there is the possibility that concurrent clone()s will create new child events. Therefore we first mark the parent event as DEAD, which marks all the extant child events as orphaned. We then avoid copying orphaned events; in order to avoid getting more of them. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: fweisbec@gmail.com Link: http://lkml.kernel.org/r/20170316125823.289567442@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Peter Zijlstra
|
15121c789e |
perf/core: Simplify perf_event_free_task()
We have ctx->event_list that contains all events; no need to repeatedly iterate the group lists to find them all. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: fweisbec@gmail.com Link: http://lkml.kernel.org/r/20170316125823.239678244@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Peter Zijlstra
|
e7cc4865f0 |
perf/core: Fix event inheritance on fork()
While hunting for clues to a use-after-free, Oleg spotted that
perf_event_init_context() can loose an error value with the result
that fork() can succeed even though we did not fully inherit the perf
event context.
Spotted-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: oleg@redhat.com
Cc: stable@vger.kernel.org
Fixes:
|
|
|
Peter Zijlstra
|
e552a8389a |
perf/core: Fix use-after-free in perf_release()
Dmitry reported syzcaller tripped a use-after-free in perf_release().
After much puzzlement Oleg spotted the below scenario:
Task1 Task2
fork()
perf_event_init_task()
/* ... */
goto bad_fork_$foo;
/* ... */
perf_event_free_task()
mutex_lock(ctx->lock)
perf_free_event(B)
perf_event_release_kernel(A)
mutex_lock(A->child_mutex)
list_for_each_entry(child, ...) {
/* child == B */
ctx = B->ctx;
get_ctx(ctx);
mutex_unlock(A->child_mutex);
mutex_lock(A->child_mutex)
list_del_init(B->child_list)
mutex_unlock(A->child_mutex)
/* ... */
mutex_unlock(ctx->lock);
put_ctx() /* >0 */
free_task();
mutex_lock(ctx->lock);
mutex_lock(A->child_mutex);
/* ... */
mutex_unlock(A->child_mutex);
mutex_unlock(ctx->lock)
put_ctx() /* 0 */
ctx->task && !TOMBSTONE
put_task_struct() /* UAF */
This patch closes the hole by making perf_event_free_task() destroy the
task <-> ctx relation such that perf_event_release_kernel() will no longer
observe the now dead task.
Spotted-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: fweisbec@gmail.com
Cc: oleg@redhat.com
Cc: stable@vger.kernel.org
Fixes:
|
|
|
Steven Rostedt (VMware)
|
2317d5f1c3 |
sched/deadline: Use deadline instead of period when calculating overflow
I was testing Daniel's changes with his test case, and tweaked it a little. Instead of having the runtime equal to the deadline, I increased the deadline ten fold. Daniel's test case had: attr.sched_runtime = 2 * 1000 * 1000; /* 2 ms */ attr.sched_deadline = 2 * 1000 * 1000; /* 2 ms */ attr.sched_period = 2 * 1000 * 1000 * 1000; /* 2 s */ To make it more interesting, I changed it to: attr.sched_runtime = 2 * 1000 * 1000; /* 2 ms */ attr.sched_deadline = 20 * 1000 * 1000; /* 20 ms */ attr.sched_period = 2 * 1000 * 1000 * 1000; /* 2 s */ The results were rather surprising. The behavior that Daniel's patch was fixing came back. The task started using much more than .1% of the CPU. More like 20%. Looking into this I found that it was due to the dl_entity_overflow() constantly returning true. That's because it uses the relative period against relative runtime vs the absolute deadline against absolute runtime. runtime / (deadline - t) > dl_runtime / dl_period There's even a comment mentioning this, and saying that when relative deadline equals relative period, that the equation is the same as using deadline instead of period. That comment is backwards! What we really want is: runtime / (deadline - t) > dl_runtime / dl_deadline We care about if the runtime can make its deadline, not its period. And then we can say "when the deadline equals the period, the equation is the same as using dl_period instead of dl_deadline". After correcting this, now when the task gets enqueued, it can throttle correctly, and Daniel's fix to the throttling of sleeping deadline tasks works even when the runtime and deadline are not the same. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com> Cc: Juri Lelli <juri.lelli@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luca Abeni <luca.abeni@santannapisa.it> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Romulo Silva de Oliveira <romulo.deoliveira@ufsc.br> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tommaso Cucinotta <tommaso.cucinotta@sssup.it> Link: http://lkml.kernel.org/r/02135a27f1ae3fe5fd032568a5a2f370e190e8d7.1488392936.git.bristot@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Daniel Bristot de Oliveira
|
df8eac8caf |
sched/deadline: Throttle a constrained deadline task activated after the deadline
During the activation, CBS checks if it can reuse the current task's
runtime and period. If the deadline of the task is in the past, CBS
cannot use the runtime, and so it replenishes the task. This rule
works fine for implicit deadline tasks (deadline == period), and the
CBS was designed for implicit deadline tasks. However, a task with
constrained deadline (deadine < period) might be awakened after the
deadline, but before the next period. In this case, replenishing the
task would allow it to run for runtime / deadline. As in this case
deadline < period, CBS enables a task to run for more than the
runtime / period. In a very loaded system, this can cause a domino
effect, making other tasks miss their deadlines.
To avoid this problem, in the activation of a constrained deadline
task after the deadline but before the next period, throttle the
task and set the replenishing timer to the begin of the next period,
unless it is boosted.
Reproducer:
--------------- %< ---------------
int main (int argc, char **argv)
{
int ret;
int flags = 0;
unsigned long l = 0;
struct timespec ts;
struct sched_attr attr;
memset(&attr, 0, sizeof(attr));
attr.size = sizeof(attr);
attr.sched_policy = SCHED_DEADLINE;
attr.sched_runtime = 2 * 1000 * 1000; /* 2 ms */
attr.sched_deadline = 2 * 1000 * 1000; /* 2 ms */
attr.sched_period = 2 * 1000 * 1000 * 1000; /* 2 s */
ts.tv_sec = 0;
ts.tv_nsec = 2000 * 1000; /* 2 ms */
ret = sched_setattr(0, &attr, flags);
if (ret < 0) {
perror("sched_setattr");
exit(-1);
}
for(;;) {
/* XXX: you may need to adjust the loop */
for (l = 0; l < 150000; l++);
/*
* The ideia is to go to sleep right before the deadline
* and then wake up before the next period to receive
* a new replenishment.
*/
nanosleep(&ts, NULL);
}
exit(0);
}
--------------- >% ---------------
On my box, this reproducer uses almost 50% of the CPU time, which is
obviously wrong for a task with 2/2000 reservation.
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luca Abeni <luca.abeni@santannapisa.it>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Romulo Silva de Oliveira <romulo.deoliveira@ufsc.br>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tommaso Cucinotta <tommaso.cucinotta@sssup.it>
Link: http://lkml.kernel.org/r/edf58354e01db46bf42df8d2dd32418833f68c89.1488392936.git.bristot@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
|
Daniel Bristot de Oliveira
|
5ac69d3778 |
sched/deadline: Make sure the replenishment timer fires in the next period
Currently, the replenishment timer is set to fire at the deadline
of a task. Although that works for implicit deadline tasks because the
deadline is equals to the begin of the next period, that is not correct
for constrained deadline tasks (deadline < period).
For instance:
f.c:
--------------- %< ---------------
int main (void)
{
for(;;);
}
--------------- >% ---------------
# gcc -o f f.c
# trace-cmd record -e sched:sched_switch \
-e syscalls:sys_exit_sched_setattr \
chrt -d --sched-runtime 490000000 \
--sched-deadline 500000000 \
--sched-period 1000000000 0 ./f
# trace-cmd report | grep "{pid of ./f}"
After setting parameters, the task is replenished and continue running
until being throttled:
f-11295 [003] 13322.113776: sys_exit_sched_setattr: 0x0
The task is throttled after running 492318 ms, as expected:
f-11295 [003] 13322.606094: sched_switch: f:11295 [-1] R ==> watchdog/3:32 [0]
But then, the task is replenished 500719 ms after the first
replenishment:
<idle>-0 [003] 13322.614495: sched_switch: swapper/3:0 [120] R ==> f:11295 [-1]
Running for 490277 ms:
f-11295 [003] 13323.104772: sched_switch: f:11295 [-1] R ==> swapper/3:0 [120]
Hence, in the first period, the task runs 2 * runtime, and that is a bug.
During the first replenishment, the next deadline is set one period away.
So the runtime / period starts to be respected. However, as the second
replenishment took place in the wrong instant, the next replenishment
will also be held in a wrong instant of time. Rather than occurring in
the nth period away from the first activation, it is taking place
in the (nth period - relative deadline).
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Luca Abeni <luca.abeni@santannapisa.it>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Romulo Silva de Oliveira <romulo.deoliveira@ufsc.br>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tommaso Cucinotta <tommaso.cucinotta@sssup.it>
Link: http://lkml.kernel.org/r/ac50d89887c25285b47465638354b63362f8adff.1488392936.git.bristot@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
|
Niklas Cassel
|
17fcbd590d |
locking/rwsem: Fix down_write_killable() for CONFIG_RWSEM_GENERIC_SPINLOCK=y
We hang if SIGKILL has been sent, but the task is stuck in down_read() (after do_exit()), even though no task is doing down_write() on the rwsem in question: INFO: task libupnp:21868 blocked for more than 120 seconds. libupnp D 0 21868 1 0x08100008 ... Call Trace: __schedule() schedule() __down_read() do_exit() do_group_exit() __wake_up_parent() This bug has already been fixed for CONFIG_RWSEM_XCHGADD_ALGORITHM=y in the following commit: |
|
|
Matt Fleming
|
caeb588297 |
sched/loadavg: Use {READ,WRITE}_ONCE() for sample window
'calc_load_update' is accessed without any kind of locking and there's a clear assumption in the code that only a single value is read or written. Make this explicit by using READ_ONCE() and WRITE_ONCE(), and avoid unintentionally seeing multiple values, or having the load/stores split. Technically the loads in calc_global_*() don't require this since those are the only functions that update 'calc_load_update', but I've added the READ_ONCE() for consistency. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Mike Galbraith <umgwanakikbuti@gmail.com> Cc: Morten Rasmussen <morten.rasmussen@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincent Guittot <vincent.guittot@linaro.org> Link: http://lkml.kernel.org/r/20170217120731.11868-3-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Matt Fleming
|
6e5f32f7a4 |
sched/loadavg: Avoid loadavg spikes caused by delayed NO_HZ accounting
If we crossed a sample window while in NO_HZ we will add LOAD_FREQ to the pending sample window time on exit, setting the next update not one window into the future, but two. This situation on exiting NO_HZ is described by: this_rq->calc_load_update < jiffies < calc_load_update In this scenario, what we should be doing is: this_rq->calc_load_update = calc_load_update [ next window ] But what we actually do is: this_rq->calc_load_update = calc_load_update + LOAD_FREQ [ next+1 window ] This has the effect of delaying load average updates for potentially up to ~9seconds. This can result in huge spikes in the load average values due to per-cpu uninterruptible task counts being out of sync when accumulated across all CPUs. It's safe to update the per-cpu active count if we wake between sample windows because any load that we left in 'calc_load_idle' will have been zero'd when the idle load was folded in calc_global_load(). This issue is easy to reproduce before, commit |
|
|
Wanpeng Li
|
dcc3b5ffe1 |
sched/deadline: Add missing update_rq_clock() in dl_task_timer()
The following warning can be triggered by hot-unplugging the CPU on which an active SCHED_DEADLINE task is running on: ------------[ cut here ]------------ WARNING: CPU: 7 PID: 0 at kernel/sched/sched.h:833 replenish_dl_entity+0x71e/0xc40 rq->clock_update_flags < RQCF_ACT_SKIP CPU: 7 PID: 0 Comm: swapper/7 Tainted: G B 4.11.0-rc1+ #24 Hardware name: LENOVO ThinkCentre M8500t-N000/SHARKBAY, BIOS FBKTC1AUS 02/16/2016 Call Trace: <IRQ> dump_stack+0x85/0xc4 __warn+0x172/0x1b0 warn_slowpath_fmt+0xb4/0xf0 ? __warn+0x1b0/0x1b0 ? debug_check_no_locks_freed+0x2c0/0x2c0 ? cpudl_set+0x3d/0x2b0 replenish_dl_entity+0x71e/0xc40 enqueue_task_dl+0x2ea/0x12e0 ? dl_task_timer+0x777/0x990 ? __hrtimer_run_queues+0x270/0xa50 dl_task_timer+0x316/0x990 ? enqueue_task_dl+0x12e0/0x12e0 ? enqueue_task_dl+0x12e0/0x12e0 __hrtimer_run_queues+0x270/0xa50 ? hrtimer_cancel+0x20/0x20 ? hrtimer_interrupt+0x119/0x600 hrtimer_interrupt+0x19c/0x600 ? trace_hardirqs_off+0xd/0x10 local_apic_timer_interrupt+0x74/0xe0 smp_apic_timer_interrupt+0x76/0xa0 apic_timer_interrupt+0x93/0xa0 The DL task will be migrated to a suitable later deadline rq once the DL timer fires and currnet rq is offline. The rq clock of the new rq should be updated. This patch fixes it by updating the rq clock after holding the new rq's rq lock. Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk> Cc: Juri Lelli <juri.lelli@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1488865888-15894-1-git-send-email-wanpeng.li@hotmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Linus Torvalds
|
ae50dfd616 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Ensure that mtu is at least IPV6_MIN_MTU in ipv6 VTI tunnel driver,
from Steffen Klassert.
2) Fix crashes when user tries to get_next_key on an LPM bpf map, from
Alexei Starovoitov.
3) Fix detection of VLAN fitlering feature for bnx2x VF devices, from
Michal Schmidt.
4) We can get a divide by zero when TCP socket are morphed into
listening state, fix from Eric Dumazet.
5) Fix socket refcounting bugs in skb_complete_wifi_ack() and
skb_complete_tx_timestamp(). From Eric Dumazet.
6) Use after free in dccp_feat_activate_values(), also from Eric
Dumazet.
7) Like bonding team needs to use ETH_MAX_MTU as netdev->max_mtu, from
Jarod Wilson.
8) Fix use after free in vrf_xmit(), from David Ahern.
9) Don't do UDP Fragmentation Offload on IPComp ipsec packets, from
Alexey Kodanev.
10) Properly check napi_complete_done() return value in order to decide
whether to re-enable IRQs or not in amd-xgbe driver, from Thomas
Lendacky.
11) Fix double free of hwmon device in marvell phy driver, from Andrew
Lunn.
12) Don't crash on malformed netlink attributes in act_connmark, from
Etienne Noss.
13) Don't remove routes with a higher metric in ipv6 ECMP route replace,
from Sabrina Dubroca.
14) Don't write into a cloned SKB in ipv6 fragmentation handling, from
Florian Westphal.
15) Fix routing redirect races in dccp and tcp, basically the ICMP
handler can't modify the socket's cached route in it's locked by the
user at this moment. From Jon Maxwell.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (108 commits)
qed: Enable iSCSI Out-of-Order
qed: Correct out-of-bound access in OOO history
qed: Fix interrupt flags on Rx LL2
qed: Free previous connections when releasing iSCSI
qed: Fix mapping leak on LL2 rx flow
qed: Prevent creation of too-big u32-chains
qed: Align CIDs according to DORQ requirement
mlxsw: reg: Fix SPVMLR max record count
mlxsw: reg: Fix SPVM max record count
net: Resend IGMP memberships upon peer notification.
dccp: fix memory leak during tear-down of unsuccessful connection request
tun: fix premature POLLOUT notification on tun devices
dccp/tcp: fix routing redirect race
ucc/hdlc: fix two little issue
vxlan: fix ovs support
net: use net->count to check whether a netns is alive or not
bridge: drop netfilter fake rtable unconditionally
ipv6: avoid write to a possibly cloned skb
net: wimax/i2400m: fix NULL-deref at probe
isdn/gigaset: fix NULL-deref at probe
...
|
|
|
Linus Torvalds
|
352526f453 |
Merge branch 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"Three cgroup fixes. Nothing critical:
- the pids controller could trigger suspicious RCU warning
spuriously. Fixed.
- in the debug controller, %p -> %pK to protect kernel pointer
from getting exposed.
- documentation formatting fix"
* 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroups: censor kernel pointer in debug files
cgroup/pids: remove spurious suspicious RCU usage warning
cgroup: Fix indenting in PID controller documentation
|
|
|
Linus Torvalds
|
bc25887935 |
Merge branch 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fix from Tejun Heo: "If a delayed work is queued with NULL @wq, workqueue code explodes after the timer expires at which point it's difficult to tell who the culprit was. This actually happened and the offender was net/smc this time. Add an explicit sanity check for it in the queueing path" * 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: trigger WARN if queue_delayed_work() is called with NULL @wq |
|
|
Peter Zijlstra
|
9bbb25afeb |
futex: Add missing error handling to FUTEX_REQUEUE_PI
Thomas spotted that fixup_pi_state_owner() can return errors and we fail to unlock the rt_mutex in that case. Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Cc: juri.lelli@arm.com Cc: bigeasy@linutronix.de Cc: xlpang@redhat.com Cc: rostedt@goodmis.org Cc: mathieu.desnoyers@efficios.com Cc: jdesfossez@efficios.com Cc: dvhart@infradead.org Cc: bristot@redhat.com Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20170304093558.867401760@infradead.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
|
|
Peter Zijlstra
|
c236c8e95a |
futex: Fix potential use-after-free in FUTEX_REQUEUE_PI
While working on the futex code, I stumbled over this potential use-after-free scenario. Dmitry triggered it later with syzkaller. pi_mutex is a pointer into pi_state, which we drop the reference on in unqueue_me_pi(). So any access to that pointer after that is bad. Since other sites already do rt_mutex_unlock() with hb->lock held, see for example futex_lock_pi(), simply move the unlock before unqueue_me_pi(). Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Cc: juri.lelli@arm.com Cc: bigeasy@linutronix.de Cc: xlpang@redhat.com Cc: rostedt@goodmis.org Cc: mathieu.desnoyers@efficios.com Cc: jdesfossez@efficios.com Cc: dvhart@infradead.org Cc: bristot@redhat.com Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20170304093558.801744246@infradead.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
|
|
Sebastian Andrzej Siewior
|
dc434e056f |
cpu/hotplug: Serialize callback invocations proper
The setup/remove_state/instance() functions in the hotplug core code are
serialized against concurrent CPU hotplug, but unfortunately not serialized
against themself.
As a consequence a concurrent invocation of these function results in
corruption of the callback machinery because two instances try to invoke
callbacks on remote cpus at the same time. This results in missing callback
invocations and initiator threads waiting forever on the completion.
The obvious solution to replace get_cpu_online() with cpu_hotplug_begin()
is not possible because at least one callsite calls into these functions
from a get_online_cpu() locked region.
Extend the protection scope of the cpuhp_state_mutex from solely protecting
the state arrays to cover the callback invocation machinery as well.
Fixes:
|
|
|
Linus Torvalds
|
5a45a5a881 |
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner: - a fix for the kexec/purgatory regression which was introduced in the merge window via an innocent sparse fix. We could have reverted that commit, but on deeper inspection it turned out that the whole machinery is neither documented nor robust. So a proper cleanup was done instead - the fix for the TLB flush issue which was discovered recently - a simple typo fix for a reboot quirk * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tlb: Fix tlb flushing when lguest clears PGE kexec, x86/purgatory: Unbreak it and clean it up x86/reboot/quirks: Fix typo in ASUS EeeBook X205TA reboot quirk |
|
|
Thomas Gleixner
|
40c50c1fec |
kexec, x86/purgatory: Unbreak it and clean it up
The purgatory code defines global variables which are referenced via a
symbol lookup in the kexec code (core and arch).
A recent commit addressing sparse warnings made these static and thereby
broke kexec_file.
Why did this happen? Simply because the whole machinery is undocumented and
lacks any form of forward declarations. The variable names are unspecific
and lack a prefix, so adding forward declarations creates shadow variables
in the core code. Aside of that the code relies on magic constants and
duplicate struct definitions with no way to ensure that these things stay
in sync. The section placement of the purgatory variables happened by
chance and not by design.
Unbreak kexec and cleanup the mess:
- Add proper forward declarations and document the usage
- Use common struct definition
- Use the proper common defines instead of magic constants
- Add a purgatory_ prefix to have a proper name space
- Use ARRAY_SIZE() instead of a homebrewn reimplementation
- Add proper sections to the purgatory variables [ From Mike ]
Fixes:
|
|
|
Linus Torvalds
|
8fe3ccaed0 |
Merge branch 'akpm' (patches from Andrew)
Merge fixes from Andrew Morton: "26 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (26 commits) userfaultfd: remove wrong comment from userfaultfd_ctx_get() fat: fix using uninitialized fields of fat_inode/fsinfo_inode sh: cayman: IDE support fix kasan: fix races in quarantine_remove_cache() kasan: resched in quarantine_remove_cache() mm: do not call mem_cgroup_free() from within mem_cgroup_alloc() thp: fix another corner case of munlock() vs. THPs rmap: fix NULL-pointer dereference on THP munlocking mm/memblock.c: fix memblock_next_valid_pfn() userfaultfd: selftest: vm: allow to build in vm/ directory userfaultfd: non-cooperative: userfaultfd_remove revalidate vma in MADV_DONTNEED userfaultfd: non-cooperative: fix fork fctx->new memleak mm/cgroup: avoid panic when init with low memory drivers/md/bcache/util.h: remove duplicate inclusion of blkdev.h mm/vmstats: add thp_split_pud event for clarity include/linux/fs.h: fix unsigned enum warning with gcc-4.2 userfaultfd: non-cooperative: release all ctx in dup_userfaultfd_complete userfaultfd: non-cooperative: robustness check userfaultfd: non-cooperative: rollback userfaultfd_exit x86, mm: unify exit paths in gup_pte_range() ... |
|
|
Andrea Arcangeli
|
dd0db88d80 |
userfaultfd: non-cooperative: rollback userfaultfd_exit
Patch series "userfaultfd non-cooperative further update for 4.11 merge
window".
Unfortunately I noticed one relevant bug in userfaultfd_exit while doing
more testing. I've been doing testing before and this was also tested
by kbuild bot and exercised by the selftest, but this bug never
reproduced before.
I dropped userfaultfd_exit as result. I dropped it because of
implementation difficulty in receiving signals in __mmput and because I
think -ENOSPC as result from the background UFFDIO_COPY should be enough
already.
Before I decided to remove userfaultfd_exit, I noticed userfaultfd_exit
wasn't exercised by the selftest and when I tried to exercise it, after
moving it to a more correct place in __mmput where it would make more
sense and where the vma list is stable, it resulted in the
event_wait_completion in D state. So then I added the second patch to
be sure even if we call userfaultfd_event_wait_completion too late
during task exit(), we won't risk to generate tasks in D state. The
same check exists in handle_userfault() for the same reason, except it
makes a difference there, while here is just a robustness check and it's
run under WARN_ON_ONCE.
While looking at the userfaultfd_event_wait_completion() function I
looked back at its callers too while at it and I think it's not ok to
stop executing dup_fctx on the fcs list because we relay on
userfaultfd_event_wait_completion to execute
userfaultfd_ctx_put(fctx->orig) which is paired against
userfaultfd_ctx_get(fctx->orig) in dup_userfault just before
list_add(fcs). This change only takes care of fctx->orig but this area
also needs further review looking for similar problems in fctx->new.
The only patch that is urgent is the first because it's an use after
free during a SMP race condition that affects all processes if
CONFIG_USERFAULTFD=y. Very hard to reproduce though and probably
impossible without SLUB poisoning enabled.
This patch (of 3):
I once reproduced this oops with the userfaultfd selftest, it's not
easily reproducible and it requires SLUB poisoning to reproduce.
general protection fault: 0000 [#1] SMP
Modules linked in:
CPU: 2 PID: 18421 Comm: userfaultfd Tainted: G ------------ T 3.10.0+ #15
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.1-0-g8891697-prebuilt.qemu-project.org 04/01/2014
task: ffff8801f83b9440 ti: ffff8801f833c000 task.ti: ffff8801f833c000
RIP: 0010:[<ffffffff81451299>] [<ffffffff81451299>] userfaultfd_exit+0x29/0xa0
RSP: 0018:ffff8801f833fe80 EFLAGS: 00010202
RAX: ffff8801f833ffd8 RBX: 6b6b6b6b6b6b6b6b RCX: ffff8801f83b9440
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8800baf18600
RBP: ffff8801f833fee8 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: ffffffff8127ceb3 R12: 0000000000000000
R13: ffff8800baf186b0 R14: ffff8801f83b99f8 R15: 00007faed746c700
FS: 0000000000000000(0000) GS:ffff88023fc80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00007faf0966f028 CR3: 0000000001bc6000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Call Trace:
do_exit+0x297/0xd10
SyS_exit+0x17/0x20
tracesys+0xdd/0xe2
Code: 00 00 66 66 66 66 90 55 48 89 e5 41 54 53 48 83 ec 58 48 8b 1f 48 85 db 75 11 eb 73 66 0f 1f 44 00 00 48 8b 5b 10 48 85 db 74 64 <4c> 8b a3 b8 00 00 00 4d 85 e4 74 eb 41 f6 84 24 2c 01 00 00 80
RIP [<ffffffff81451299>] userfaultfd_exit+0x29/0xa0
RSP <ffff8801f833fe80>
---[ end trace 9fecd6dcb442846a ]---
In the debugger I located the "mm" pointer in the stack and walking
mm->mmap->vm_next through the end shows the vma->vm_next list is fully
consistent and it is null terminated list as expected. So this has to
be an SMP race condition where userfaultfd_exit was running while the
vma list was being modified by another CPU.
When userfaultfd_exit() run one of the ->vm_next pointers pointed to
SLAB_POISON (RBX is the vma pointer and is 0x6b6b..).
The reason is that it's not running in __mmput but while there are still
other threads running and it's not holding the mmap_sem (it can't as it
has to wait the even to be received by the manager). So this is an use
after free that was happening for all processes.
One more implementation problem aside from the race condition:
userfaultfd_exit has really to check a flag in mm->flags before walking
the vma or it's going to slowdown the exit() path for regular tasks.
One more implementation problem: at that point signals can't be
delivered so it would also create a task in D state if the manager
doesn't read the event.
The major design issue: it overall looks superfluous as the manager can
check for -ENOSPC in the background transfer:
if (mmget_not_zero(ctx->mm)) {
[..]
} else {
return -ENOSPC;
}
It's safer to roll it back and re-introduce it later if at all.
[rppt@linux.vnet.ibm.com: documentation fixup after removal of UFFD_EVENT_EXIT]
Link: http://lkml.kernel.org/r/1488345437-4364-1-git-send-email-rppt@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/20170224181957.19736-2-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Masahiro Yamada
|
505d3085d7 |
scripts/spelling.txt: add "overide" pattern and fix typo instances
Fix typos and add the following to the scripts/spelling.txt: overide||override While we are here, fix the doubled "address" in the touched line Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt. Also, fix the comment block style in the touched hunks in drivers/media/dvb-frontends/drx39xyj/drx_driver.h. Link: http://lkml.kernel.org/r/1481573103-11329-21-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Masahiro Yamada
|
8a1115ff6b |
scripts/spelling.txt: add "disble(d)" pattern and fix typo instances
Fix typos and add the following to the scripts/spelling.txt: disble||disable disbled||disabled I kept the TSL2563_INT_DISBLED in /drivers/iio/light/tsl2563.c untouched. The macro is not referenced at all, but this commit is touching only comment blocks just in case. Link: http://lkml.kernel.org/r/1481573103-11329-20-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Linus Torvalds
|
c1aa905a30 |
Power management updates for v4.11-rc2
- Three fixes for intel_pstate problems related to the passive
mode (in which it acts as a regular cpufreq scaling driver), two
for the handling of global P-state limits and one for the handling
of the cpu_frequency tracepoint in that mode (Rafael Wysocki).
- Three fixes for the handling of P-state limits in intel_pstate in
the active mode (Rafael Wysocki).
- Introduction of a new cpufreq.off=1 kernel command line argument
that will disable cpufreq entirely if passed to the kernel and
is simply hooked up to the existing code used by Xen (Len Brown).
- Fix for the schedutil cpufreq governor to prevent it from using
stale raw frequency values in configurations with mutiple CPUs
sharing one policy object and a cleanup for it reducing its
overhead slightly (Viresh Kumar).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Gwp7
-----END PGP SIGNATURE-----
Merge tag 'pm-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix several issues in the intel_pstate driver and one issue in
the schedutil cpufreq governor, clean up that governor a bit and hook
up existing code for disabling cpufreq to a new kernel command line
option.
Specifics:
- Three fixes for intel_pstate problems related to the passive mode
(in which it acts as a regular cpufreq scaling driver), two for the
handling of global P-state limits and one for the handling of the
cpu_frequency tracepoint in that mode (Rafael Wysocki).
- Three fixes for the handling of P-state limits in intel_pstate in
the active mode (Rafael Wysocki).
- Introduction of a new cpufreq.off=1 kernel command line argument
that will disable cpufreq entirely if passed to the kernel and is
simply hooked up to the existing code used by Xen (Len Brown).
- Fix for the schedutil cpufreq governor to prevent it from using
stale raw frequency values in configurations with mutiple CPUs
sharing one policy object and a cleanup for it reducing its
overhead slightly (Viresh Kumar)"
* tag 'pm-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Do not reinit performance limits in ->setpolicy
cpufreq: intel_pstate: Fix intel_pstate_verify_policy()
cpufreq: intel_pstate: Fix global settings in active mode
cpufreq: Add the "cpufreq.off=1" cmdline option
cpufreq: schedutil: Pass sg_policy to get_next_freq()
cpufreq: schedutil: move cached_raw_freq to struct sugov_policy
cpufreq: intel_pstate: Avoid triggering cpu_frequency tracepoint unnecessarily
cpufreq: intel_pstate: Fix intel_cpufreq_verify_policy()
cpufreq: intel_pstate: Do not use performance_limits in passive mode
|
|
|
Alexei Starovoitov
|
4fe8435909 |
bpf: convert htab map to hlist_nulls
when all map elements are pre-allocated one cpu can delete and reuse htab_elem
while another cpu is still walking the hlist. In such case the lookup may
miss the element. Convert hlist to hlist_nulls to avoid such scenario.
When bucket lock is taken there is no need to take such precautions,
so only convert map_lookup and map_get_next to nulls.
The race window is extremely small and only reproducible with explicit
udelay() inside lookup_nulls_elem_raw()
Similar to hlist add hlist_nulls_for_each_entry_safe() and
hlist_nulls_entry_safe() helpers.
Fixes:
|
|
|
Alexei Starovoitov
|
9f691549f7 |
bpf: fix struct htab_elem layout
when htab_elem is removed from the bucket list the htab_elem.hash_node.next
field should not be overridden too early otherwise we have a tiny race window
between lookup and delete.
The bug was discovered by manual code analysis and reproducible
only with explicit udelay() in lookup_elem_raw().
Fixes:
|
|
|
Linus Torvalds
|
bd0f9b356d |
sched/headers: fix up header file dependency on <linux/sched/signal.h>
The scheduler header file split and cleanups ended up exposing a few
nasty header file dependencies, and in particular it showed how we in
<linux/wait.h> ended up depending on "signal_pending()", which now comes
from <linux/sched/signal.h>.
That's a very subtle and annoying dependency, which already caused a
semantic merge conflict (see commit
|
|
|
Linus Torvalds
|
8a9172356f |
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar: "This includes a fix for lockups caused by incorrect nsecs related cleanup, and a capabilities check fix for timerfd" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: jiffies: Revert bogus conversion of NSEC_PER_SEC to TICK_NSEC timerfd: Only check CAP_WAKE_ALARM when it is needed |
|
|
Linus Torvalds
|
609b07b72d |
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar: "A fix for KVM's scheduler clock which (erroneously) was always marked unstable, a fix for RT/DL load balancing, plus latency fixes" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/clock, x86/tsc: Rework the x86 'unstable' sched_clock() interface sched/core: Fix pick_next_task() for RT,DL sched/fair: Make select_idle_cpu() more aggressive |
|
|
Linus Torvalds
|
c3abcabe81 |
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar: "This includes a fix for a crash if certain special addresses are kprobed, plus does a rename of two Kconfig variables that were a minor misnomer" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Rename CONFIG_[UK]PROBE_EVENT to CONFIG_[UK]PROBE_EVENTS kprobes/x86: Fix kernel panic when certain exception-handling addresses are probed |
|
|
Linus Torvalds
|
500e1af252 |
Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar: - Change the new refcount_t warnings from WARN() to WARN_ONCE() - two ww_mutex fixes - plus a new lockdep self-consistency check for a bug that triggered in practice * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/ww_mutex: Adjust the lock number for stress test locking/lockdep: Add nest_lock integrity test locking/ww_mutex: Replace cpu_relax() with cond_resched() for tests locking/refcounts: Change WARN() to WARN_ONCE() |
|
|
Linus Torvalds
|
304362a8bc |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull namespace fix from Eric Biederman: "This fixes a race between put_ucounts and get_ucounts that can cause a use after free. The fix works by simplifying the code and so there is not even a temptation to be clever and play spinlock vs atomic reference games" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: ucount: Remove the atomicity from ucount->count |
|
|
Linus Torvalds
|
f26db9649a |
There was some breakage with the changes for jump labels in the 4.11 merge
window. Namely powerpc broke as jump labels uses the two LSB bits as flags
in initialization. A check was added to make sure that all jump label
entries were 4 bytes aligned, but powerpc didn't work that way for modules.
Adding an alignment in the module linker script appeared to be the best
solution.
Jump labels also added an anonymous union to access those LSB bits as a
normal long. But because this structure had static initialization, it broke
older compilers that could not statically initialize anonymous unions
without brackets.
The command line parameter for setting function graph filter broke the
"EMPTY_HASH" descriptor by modifying it instead of creating a new hash to
hold the entries.
The command line parameter ftrace_graph_max_depth was added to allow its
setting at boot time. It uses existing code and only the command line hook
was added. This is not really a fix, but as it uses existing code without
affecting anything else, I added it to this release. It was ready before the
merge window closed, but I wanted to let it sit in linux-next for a couple
of days first.
-----BEGIN PGP SIGNATURE-----
iQExBAABCAAbBQJYvNrAFBxyb3N0ZWR0QGdvb2RtaXMub3JnAAoJEMm5BfJq2Y3L
JGQIAMkayeZ0OCyYHRPR4EcCrdE3fATmt1huJWHrMPnT4/fLabL8XQqrOpnOBMq1
GFZb1SMkBmvGtAHF4GbvCxnIUfDQko6BTQAd8EMea1WM8+Kb66/BLgJawjWIU9I0
dNYre9ONgR2NOzkz6nfKRXnmy0lRcOweBb09YYGSzY11Md7d8T3T4TUrPNZdYrO9
8ZMbF4qRd9KLMRHcsWqvhWhBISxWnmtUSlthfweukKgDMy8OKpb7pR0ckjtYwsWX
RF41jqLqzSUqtd/nE2Sj/aT8XOP4pfrKEUuNM4SBj8q5jmNcZuqi8Q9wItu3LWR2
jqM/9UKTzaCr9cchwuvUC0i+jWc=
=kDql
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"There was some breakage with the changes for jump labels in the 4.11
merge window:
- powerpc broke as jump labels uses the two LSB bits as flags in
initialization.
A check was added to make sure that all jump label entries were 4
bytes aligned, but powerpc didn't work that way for modules. Adding
an alignment in the module linker script appeared to be the best
solution.
- Jump labels also added an anonymous union to access those LSB bits
as a normal long. But because this structure had static
initialization, it broke older compilers that could not statically
initialize anonymous unions without brackets.
- The command line parameter for setting function graph filter broke
the "EMPTY_HASH" descriptor by modifying it instead of creating a
new hash to hold the entries.
- The command line parameter ftrace_graph_max_depth was added to
allow its setting at boot time. It uses existing code and only the
command line hook was added.
This is not really a fix, but as it uses existing code without
affecting anything else, I added it to this release. It was ready
before the merge window closed, but I wanted to let it sit in
linux-next for a couple of days first"
* tag 'trace-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace/graph: Add ftrace_graph_max_depth kernel parameter
tracing: Add #undef to fix compile error
jump_label: Add comment about initialization order for anonymous unions
jump_label: Fix anonymous union initialization
module: set __jump_table alignment to 8
ftrace/graph: Do not modify the EMPTY_HASH for the function_graph filter
tracing: Fix code comment for ftrace_ops_get_func()
|
|
|
Frederic Weisbecker
|
fa3aa7a54f |
jiffies: Revert bogus conversion of NSEC_PER_SEC to TICK_NSEC
commit |
|
|
Eric W. Biederman
|
040757f738 |
ucount: Remove the atomicity from ucount->count
Always increment/decrement ucount->count under the ucounts_lock. The
increments are there already and moving the decrements there means the
locking logic of the code is simpler. This simplification in the
locking logic fixes a race between put_ucounts and get_ucounts that
could result in a use-after-free because the count could go zero then
be found by get_ucounts and then be freed by put_ucounts.
A bug presumably this one was found by a combination of syzkaller and
KASAN. JongWhan Kim reported the syzkaller failure and Dmitry Vyukov
spotted the race in the code.
Cc: stable@vger.kernel.org
Fixes:
|
|
|
Tejun Heo
|
637fdbae60 |
workqueue: trigger WARN if queue_delayed_work() is called with NULL @wq
If queue_delayed_work() gets called with NULL @wq, the kernel will oops asynchronuosly on timer expiration which isn't too helpful in tracking down the offender. This actually happened with smc. __queue_delayed_work() already does several input sanity checks synchronously. Add NULL @wq check. Reported-by: Dave Jones <davej@codemonkey.org.uk> Link: http://lkml.kernel.org/r/20170227171439.jshx3qplflyrgcv7@codemonkey.org.uk Signed-off-by: Tejun Heo <tj@kernel.org> |
|
|
Kees Cook
|
b6a6759daf |
cgroups: censor kernel pointer in debug files
As found in grsecurity, this avoids exposing a kernel pointer through the cgroup debug entries. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Tejun Heo <tj@kernel.org> |
|
|
Tejun Heo
|
1d18c2747f |
cgroup/pids: remove spurious suspicious RCU usage warning
pids_can_fork() is special in that the css association is guaranteed to be stable throughout the function and thus doesn't need RCU protection around task_css access. When determining the css to charge the pid, task_css_check() is used to override the RCU sanity check. While adding a warning message on fork rejection from pids limit, |
|
|
Alexei Starovoitov
|
f38837b08d |
bpf: add get_next_key callback to LPM map
map_get_next_key callback is mandatory. Supply dummy handler.
Fixes:
|