Commit Graph

12 Commits

Author SHA1 Message Date
Lv Zheng 8b48463f89 ACPI: Clean up inclusions of ACPI header files
Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and
<acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h>
inclusions and remove some inclusions of those files that aren't
necessary.

First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>
should not be included directly from any files that are built for
CONFIG_ACPI unset, because that generally leads to build warnings about
undefined symbols in !CONFIG_ACPI builds.  For CONFIG_ACPI set,
<linux/acpi.h> includes those files and for CONFIG_ACPI unset it
provides stub ACPI symbols to be used in that case.

Second, there are ordering dependencies between those files that always
have to be met.  Namely, it is required that <acpi/acpi_bus.h> be included
prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the
latter depends on are always there.  And <acpi/acpi.h> which provides
basic ACPICA type declarations should always be included prior to any other
ACPI headers in CONFIG_ACPI builds.  That also is taken care of including
<linux/acpi.h> as appropriate.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff)
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-07 01:03:14 +01:00
Joe Perches 283c0972d5 xen: Convert printks to pr_<level>
Convert printks to pr_<level> (excludes printk(KERN_DEBUG...)
to be more consistent throughout the xen subsystem.

Add pr_fmt with KBUILD_MODNAME or "xen:" KBUILD_MODNAME
Coalesce formats and add missing word spaces
Add missing newlines
Align arguments and reflow to 80 columns
Remove DRV_NAME from formats as pr_fmt adds the same content

This does change some of the prefixes of these messages
but it also does make them more consistent.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-06-28 11:19:58 -04:00
Ben Guthro 18c0025b69 xen: resolve section mismatch warnings in xen-acpi-processor
The following resolves a section mismatch warning below in xen-acpi-processor introduced by
3fac10145b [13/13] xen: Re-upload processor PM data to hypervisor after S3 resume (v2)

Warning:
WARNING: drivers/xen/built-in.o(.text+0x2056a): Section mismatch in reference from the function xen_upload_processor_pm_data() to the function .init.text:read_acpi_id()
   The function xen_upload_processor_pm_data() references
   the function __init read_acpi_id().
   This is often because xen_upload_processor_pm_data lacks a __init
   annotation or the annotation of read_acpi_id is wrong.

Reported-by: kbuild test robot <fengguang.wu@intel.com>

Signed-off-by: Ben Guthro <benjamin.guthro@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-04-19 10:44:23 -04:00
Ben Guthro 3fac10145b xen: Re-upload processor PM data to hypervisor after S3 resume (v2)
Upon resume, it was found that ACPI C-states were missing from non-boot CPUs.
This change registers a syscore_ops handler for this case, and re-uploads the
PM information to the hypervisor to properly reset the C-state on these
processors.

v2:
v1 did not go through the check_acpi_ids() code-path, and missed some cases when
xen was running with the dom0_max_vcpus= command line parameter.

Signed-Off-By: Ben Guthro <benjamin.guthro@citrix.com>
[v3: Ate some tabs, s/printk/pr_info/]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-04-17 10:43:56 -04:00
Konrad Rzeszutek Wilk 949dd8c14f xen/acpi-processor: Don't dereference struct acpi_processor on all CPUs.
With git commit c705c78c0d
"acpi: Export the acpi_processor_get_performance_info" we are now
using a different mechanism to access the P-states.

The acpi_processor per-cpu structure is set and filtered by the
core ACPI code which shrinks the per_cpu contents to only online CPUs.
In the past we would call acpi_processor_register_performance()
which would have not tried to dereference offline cpus.

With the new patch and the fact that the loop we take is for
for_all_possible_cpus we end up crashing on some machines.
We could modify the loop to be for online_cpus - but all the other
loops in the code use possible_cpus (for a good reason) - so lets
leave it as so and just check if per_cpu(processor) is NULL.

With this patch we will bypass the !online but possible CPUs.
This fixes:

IP: [<ffffffffa00d13b5>] xen_acpi_processor_init+0x1b6/0xe01 [xen_acpi_processor]
PGD 4126e6067 PUD 4126e3067 PMD 0
Oops: 0002 [#1] SMP
Pid: 432, comm: modprobe Not tainted 3.9.0-rc3+ #28 To be filled by O.E.M. To be filled by O.E.M./M5A97
RIP: e030:[<ffffffffa00d13b5>]  [<ffffffffa00d13b5>] xen_acpi_processor_init+0x1b6/0xe01 [xen_acpi_processor]
RSP: e02b:ffff88040c8a3ce8  EFLAGS: 00010282
.. snip..
Call Trace:
 [<ffffffffa00d11ff>] ? read_acpi_id+0x12b/0x12b [xen_acpi_processor]
 [<ffffffff8100215a>] do_one_initcall+0x12a/0x180
 [<ffffffff810c42c3>] load_module+0x1cd3/0x2870
 [<ffffffff81319b70>] ? ddebug_proc_open+0xc0/0xc0
 [<ffffffff810c4f37>] sys_init_module+0xd7/0x120
 [<ffffffff8166ce19>] system_call_fastpath+0x16/0x1b

on some machines.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-03-22 08:23:11 -04:00
Konrad Rzeszutek Wilk c705c78c0d acpi: Export the acpi_processor_get_performance_info
The git commit d5aaffa9dd
(cpufreq: handle cpufreq being disabled for all exported function)
tightens the cpufreq API by returning errors when disable_cpufreq()
had been called.

The problem we are hitting is that the module xen-acpi-processor which
uses the ACPI's functions: acpi_processor_register_performance,
acpi_processor_preregister_performance, and acpi_processor_notify_smm
fails at acpi_processor_register_performance with -22.

Note that earlier during bootup in arch/x86/xen/setup.c there is also
an call to cpufreq's API: disable_cpufreq().

This is b/c we want the Linux kernel to parse the ACPI data, but leave
the cpufreq decisions to the hypervisor.

In v3.9 all the checks that d5aaffa9dd
added are now hit and the calls to cpufreq_register_notifier will now
fail. This means that acpi_processor_ppc_init ends up printing:

"Warning: Processor Platform Limit not supported"

and the acpi_processor_ppc_status is not set.

The repercussions of that is that the call to
acpi_processor_register_performance fails right away at:

	if (!(acpi_processor_ppc_status & PPC_REGISTERED))

and we don't progress any further on parsing and extracting the _P*
objects.

The only reason the Xen code called that function was b/c it was
exported and the only way to gather the P-states. But we can also
just make acpi_processor_get_performance_info be exported and not
use acpi_processor_register_performance. This patch does so.

Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-03-06 10:00:34 -05:00
Daniel Lezcano c59687f846 cpuidle / ACPI : remove power from acpi_processor_cx structure
Remove the unused power field from struct struct acpi_processor_cx.

[rjw: Modified changelog.]

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-05 15:13:48 +02:00
Konrad Rzeszutek Wilk 17f9b896b0 xen/acpi: Fix potential memory leak.
Coverity points out that we do not free in one case the
pr_backup - and sure enough we forgot.

Found by Coverity (CID 401970)

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-07-19 15:51:42 -04:00
H. Peter Anvin 323f90a608 xen-acpi-processor: Add missing #include <xen/xen.h>
This file depends on <xen/xen.h>, but the dependency was hidden due
to: <asm/acpi.h> -> <asm/trampoline.h> -> <asm/io.h> -> <xen/xen.h>

With the removal of <asm/trampoline.h>, this exposed the missing

Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-05-17 10:03:02 -07:00
Konrad Rzeszutek Wilk b930fe5e1f xen/acpi: Workaround broken BIOSes exporting non-existing C-states.
We did a similar check for the P-states but did not do it for
the C-states. What we want to do is ignore cases where the DSDT
has definition for sixteen CPUs, but the machine only has eight
CPUs and we get:
xen-acpi-processor: (CX): Hypervisor error (-22) for ACPI CPU14

Reported-by: Tobias Geiger <tobias.geiger@vido.info>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-04-26 22:07:28 -04:00
Konrad Rzeszutek Wilk 27257fc07c xen/acpi: Remove the WARN's as they just create noise.
When booting the kernel under machines that do not have P-states
we would end up with:

------------[ cut here ]------------
 WARNING: at drivers/xen/xen-acpi-processor.c:504
 xen_acpi_processor_init+0x286/0
 x2e0()
 Hardware name: ProLiant BL460c G6
 Modules linked in:
 Pid: 1, comm: swapper Not tainted 2.6.39-200.0.3.el5uek #1
 Call Trace:
  [<ffffffff8191d056>] ? xen_acpi_processor_init+0x286/0x2e0
  [<ffffffff81068300>] warn_slowpath_common+0x90/0xc0
  [<ffffffff8191cdd0>] ? check_acpi_ids+0x1e0/0x1e0
  [<ffffffff8106834a>] warn_slowpath_null+0x1a/0x20
  [<ffffffff8191d056>] xen_acpi_processor_init+0x286/0x2e0
  [<ffffffff8191cdd0>] ? check_acpi_ids+0x1e0/0x1e0
  [<ffffffff81002168>] do_one_initcall+0xe8/0x130

.. snip..

Which is OK - the machines do not have P-states, so we fail to register
to process the _PXX states. But there is no need to WARN the user
of it.

Oracle BZ# 13871288
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-03-21 12:17:22 -04:00
Konrad Rzeszutek Wilk 59a5680291 xen/acpi-processor: C and P-state driver that uploads said data to hypervisor.
This driver solves three problems:
 1). Parse and upload ACPI0007 (or PROCESSOR_TYPE) information to the
     hypervisor - aka P-states (cpufreq data).
 2). Upload the the Cx state information (cpuidle data).
 3). Inhibit CPU frequency scaling drivers from loading.

The reason for wanting to solve 1) and 2) is such that the Xen hypervisor
is the only one that knows the CPU usage of different guests and can
make the proper decision of when to put CPUs and packages in proper states.
Unfortunately the hypervisor has no support to parse ACPI DSDT tables, hence it
needs help from the initial domain to provide this information. The reason
for 3) is that we do not want the initial domain to change P-states while the
hypervisor is doing it as well - it causes rather some funny cases of P-states
transitions.

For this to work, the driver parses the Power Management data and uploads said
information to the Xen hypervisor. It also calls acpi_processor_notify_smm()
to inhibit the other CPU frequency scaling drivers from being loaded.

Everything revolves around the 'struct acpi_processor' structure which
gets updated during the bootup cycle in different stages. At the startup, when
the ACPI parser starts, the C-state information is processed (processor_idle)
and saved in said structure as 'power' element. Later on, the CPU frequency
scaling driver (powernow-k8 or acpi_cpufreq), would call the the
acpi_processor_* (processor_perflib functions) to parse P-states information
and populate in the said structure the 'performance' element.

Since we do not want the CPU frequency scaling drivers from loading
we have to call the acpi_processor_* functions to parse the P-states and
call "acpi_processor_notify_smm" to stop them from loading.

There is also one oddity in this driver which is that under Xen, the
physical online CPU count can be different from the virtual online CPU count.
Meaning that the macros 'for_[online|possible]_cpu' would process only
up to virtual online CPU count. We on the other hand want to process
the full amount of physical CPUs. For that, the driver checks if the ACPI IDs
count is different from the APIC ID count - which can happen if the user
choose to use dom0_max_vcpu argument. In such a case a backup of the PM
structure is used and uploaded to the hypervisor.

[v1-v2: Initial RFC implementations that were posted]
[v3: Changed the name to passthru suggested by Pasi Kärkkäinen <pasik@iki.fi>]
[v4: Added vCPU != pCPU support - aka dom0_max_vcpus support]
[v5: Cleaned up the driver, fix bug under Athlon XP]
[v6: Changed the driver to a CPU frequency governor]
[v7: Jan Beulich <jbeulich@suse.com> suggestion to make it a cpufreq scaling driver
     made me rework it as driver that inhibits cpufreq scaling driver]
[v8: Per Jan's review comments, fixed up the driver]
[v9: Allow to continue even if acpi_processor_preregister_perf.. fails]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-03-14 12:35:42 -04:00