mirror of https://gitee.com/openkylin/linux.git
69721 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Baoquan He
|
669280a152 |
kexec: take the segment adding out of locate_mem_hole functions
In locate_mem_hole functions, a memory hole is located and added as kexec_segment. But from the name of locate_mem_hole, it should only take responsibility of searching a available memory hole to contain data of a specified size. So in this patch add a new field 'mem' into kexec_buf, then take that kexec segment adding code out of locate_mem_hole_top_down and locate_mem_hole_bottom_up. This make clear of the functionality of locate_mem_hole just like it declars to do. And by this locate_mem_hole_callback chould be used later if anyone want to locate a memory hole for other use. Meanwhile Vivek suggested opening code function __kexec_add_segment(), that way we have to retreive ksegment pointer once and it is easy to read. So just do it in this patch and remove __kexec_add_segment() since no one use it anymore. Signed-off-by: Baoquan He <bhe@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Oleg Nesterov
|
1c3bea0e71 |
signal: use BUILD_BUG() instead of _NSIG_WORDS_is_unsupported_size()
Kill _NSIG_WORDS_is_unsupported_size(), use BUILD_BUG() instead. This simplifies the code, avoids the nested-externs warnings, and this way we do not defer the problem to linker. Also, fix the indentation in _SIG_SET_BINOP() and _SIG_SET_OP(). Note: this patch assumes that the code like "if (0) BUILD_BUG();" is valid. If not (say __compiletime_error() is not defined and thus __compiletime_error_fallback() uses a negative array) we should fix BUILD_BUG() and/or BUILD_BUG_ON_MSG(). This code should be fine by definition, this is the documented purpose of BUILD_BUG(). [sfr@canb.auug.org.au: fix powerpc build failures] Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Lai Jiangshan
|
6de8ab68bc |
lib: remove prio_heap
The prio_heap code is unused since commit
|
|
|
Masahiro Yamada
|
8b21d9ca17 |
list: include linux/kernel.h
linux/list.h uses container_of, therefore it depends on linux/kernel.h. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Marek Szyprowski
|
de9e14eebf |
drivers: dma-contiguous: add initialization from device tree
Add a function to create CMA region from previously reserved memory and add support for handling 'shared-dma-pool' reserved-memory device tree nodes. Based on previous code provided by Josh Cartwright <joshc@codeaurora.org> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Josh Cartwright <joshc@codeaurora.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Sasha Levin
|
71458cfc78 |
kernel: add support for gcc 5
We're missing include/linux/compiler-gcc5.h which is required now because gcc branched off to v5 in trunk. Just copy the relevant bits out of include/linux/compiler-gcc4.h, no new code is added as of now. This fixes a build error when using gcc 5. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Linus Torvalds
|
faafcba3b5 |
Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle were:
- Optimized support for Intel "Cluster-on-Die" (CoD) topologies (Dave
Hansen)
- Various sched/idle refinements for better idle handling (Nicolas
Pitre, Daniel Lezcano, Chuansheng Liu, Vincent Guittot)
- sched/numa updates and optimizations (Rik van Riel)
- sysbench speedup (Vincent Guittot)
- capacity calculation cleanups/refactoring (Vincent Guittot)
- Various cleanups to thread group iteration (Oleg Nesterov)
- Double-rq-lock removal optimization and various refactorings
(Kirill Tkhai)
- various sched/deadline fixes
... and lots of other changes"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
sched/dl: Use dl_bw_of() under rcu_read_lock_sched()
sched/fair: Delete resched_cpu() from idle_balance()
sched, time: Fix build error with 64 bit cputime_t on 32 bit systems
sched: Improve sysbench performance by fixing spurious active migration
sched/x86: Fix up typo in topology detection
x86, sched: Add new topology for multi-NUMA-node CPUs
sched/rt: Use resched_curr() in task_tick_rt()
sched: Use rq->rd in sched_setaffinity() under RCU read lock
sched: cleanup: Rename 'out_unlock' to 'out_free_new_mask'
sched: Use dl_bw_of() under RCU read lock
sched/fair: Remove duplicate code from can_migrate_task()
sched, mips, ia64: Remove __ARCH_WANT_UNLOCKED_CTXSW
sched: print_rq(): Don't use tasklist_lock
sched: normalize_rt_tasks(): Don't use _irqsave for tasklist_lock, use task_rq_lock()
sched: Fix the task-group check in tg_has_rt_tasks()
sched/fair: Leverage the idle state info when choosing the "idlest" cpu
sched: Let the scheduler see CPU idle states
sched/deadline: Fix inter- exclusive cpusets migrations
sched/deadline: Clear dl_entity params when setscheduling to different class
sched/numa: Kill the wrong/dead TASK_DEAD check in task_numa_fault()
...
|
|
|
Linus Torvalds
|
9d9420f120 |
Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"Kernel side updates:
- Fix and enhance poll support (Jiri Olsa)
- Re-enable inheritance optimization (Jiri Olsa)
- Enhance Intel memory events support (Stephane Eranian)
- Refactor the Intel uncore driver to be more maintainable (Zheng
Yan)
- Enhance and fix Intel CPU and uncore PMU drivers (Peter Zijlstra,
Andi Kleen)
- [ plus various smaller fixes/cleanups ]
User visible tooling updates:
- Add +field argument support for --field option, so that one can add
fields to the default list of fields to show, ie now one can just
do:
perf report --fields +pid
And the pid will appear in addition to the default fields (Jiri
Olsa)
- Add +field argument support for --sort option (Jiri Olsa)
- Honour -w in the report tools (report, top), allowing to specify
the widths for the histogram entries columns (Namhyung Kim)
- Properly show submicrosecond times in 'perf kvm stat' (Christian
Borntraeger)
- Add beautifier for mremap flags param in 'trace' (Alex Snast)
- perf script: Allow callchains if any event samples them
- Don't truncate Intel style addresses in 'annotate' (Alex Converse)
- Allow profiling when kptr_restrict == 1 for non root users, kernel
samples will just remain unresolved (Andi Kleen)
- Allow configuring default options for callchains in config file
(Namhyung Kim)
- Support operations for shared futexes. (Davidlohr Bueso)
- "perf kvm stat report" improvements by Alexander Yarygin:
- Save pid string in opts.target.pid
- Enable the target.system_wide flag
- Unify the title bar output
- [ plus lots of other fixes and small improvements. ]
Tooling infrastructure changes:
- Refactor unit and scale function parameters for PMU parsing
routines (Matt Fleming)
- Improve DSO long names lookup with rbtree, resulting in great
speedup for workloads with lots of DSOs (Waiman Long)
- We were not handling POLLHUP notifications for event file
descriptors
Fix it by filtering entries in the events file descriptor array
after poll() returns, refcounting mmaps so that when the last fd
pointing to a perf mmap goes away we do the unmap (Arnaldo Carvalho
de Melo)
- Intel PT prep work, from Adrian Hunter, including:
- Let a user specify a PMU event without any config terms
- Add perf-with-kcore script
- Let default config be defined for a PMU
- Add perf_pmu__scan_file()
- Add a 'perf test' for tracking with sched_switch
- Add 'flush' callback to scripting API
- Use ring buffer consume method to look like other tools (Arnaldo
Carvalho de Melo)
- hists browser (used in top and report) refactorings, getting rid of
unused variables and reducing source code size by handling similar
cases in a fewer functions (Namhyung Kim).
- Replace thread unsafe strerror() with strerror_r() accross the
whole tools/perf/ tree (Masami Hiramatsu)
- Rename ordered_samples to ordered_events and allow setting a queue
size for ordering events (Jiri Olsa)
- [ plus lots of fixes, cleanups and other improvements ]"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (198 commits)
perf/x86: Tone down kernel messages when the PMU check fails in a virtual environment
perf/x86/intel/uncore: Fix minor race in box set up
perf record: Fix error message for --filter option not coming after tracepoint
perf tools: Fix build breakage on arm64 targets
perf symbols: Improve DSO long names lookup speed with rbtree
perf symbols: Encapsulate dsos list head into struct dsos
perf bench futex: Sanitize -q option in requeue
perf bench futex: Support operations for shared futexes
perf trace: Fix mmap return address truncation to 32-bit
perf tools: Refactor unit and scale function parameters
perf tools: Fix line number in the config file error message
perf tools: Convert {record,top}.call-graph option to call-graph.record-mode
perf tools: Introduce perf_callchain_config()
perf callchain: Move some parser functions to callchain.c
perf tools: Move callchain config from record_opts to callchain_param
perf hists browser: Fix callchain print bug on TUI
perf tools: Use ACCESS_ONCE() instead of volatile cast
perf tools: Modify error code for when perf_session__new() fails
perf tools: Fix perf record as non root with kptr_restrict == 1
perf stat: Fix --per-core on multi socket systems
...
|
|
|
Linus Torvalds
|
6d5f0ebfc0 |
Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core locking updates from Ingo Molnar:
"The main updates in this cycle were:
- mutex MCS refactoring finishing touches: improve comments, refactor
and clean up code, reduce debug data structure footprint, etc.
- qrwlock finishing touches: remove old code, self-test updates.
- small rwsem optimization
- various smaller fixes/cleanups"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Revert qrwlock recusive stuff
locking/rwsem: Avoid double checking before try acquiring write lock
locking/rwsem: Move EXPORT_SYMBOL() lines to follow function definition
locking/rwlock, x86: Delete unused asm/rwlock.h and rwlock.S
locking/rwlock, x86: Clean up asm/spinlock*.h to remove old rwlock code
locking/semaphore: Resolve some shadow warnings
locking/selftest: Support queued rwlock
locking/lockdep: Restrict the use of recursive read_lock() with qrwlock
locking/spinlocks: Always evaluate the second argument of spin_lock_nested()
locking/Documentation: Update locking/mutex-design.txt disadvantages
locking/Documentation: Move locking related docs into Documentation/locking/
locking/mutexes: Use MUTEX_SPIN_ON_OWNER when appropriate
locking/mutexes: Refactor optimistic spinning code
locking/mcs: Remove obsolete comment
locking/mutexes: Document quick lock release when unlocking
locking/mutexes: Standardize arguments in lock/unlock slowpaths
locking: Remove deprecated smp_mb__() barriers
|
|
|
Linus Torvalds
|
dbb885fecc |
Merge branch 'locking-arch-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull arch atomic cleanups from Ingo Molnar:
"This is a series kept separate from the main locking tree, which
cleans up and improves various details in the atomics type handling:
- Remove the unused atomic_or_long() method
- Consolidate and compress atomic ops implementations between
architectures, to reduce linecount and to make it easier to add new
ops.
- Rewrite generic atomic support to only require cmpxchg() from an
architecture - generate all other methods from that"
* 'locking-arch-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
locking,arch: Use ACCESS_ONCE() instead of cast to volatile in atomic_read()
locking, mips: Fix atomics
locking, sparc64: Fix atomics
locking,arch: Rewrite generic atomic support
locking,arch,xtensa: Fold atomic_ops
locking,arch,sparc: Fold atomic_ops
locking,arch,sh: Fold atomic_ops
locking,arch,powerpc: Fold atomic_ops
locking,arch,parisc: Fold atomic_ops
locking,arch,mn10300: Fold atomic_ops
locking,arch,mips: Fold atomic_ops
locking,arch,metag: Fold atomic_ops
locking,arch,m68k: Fold atomic_ops
locking,arch,m32r: Fold atomic_ops
locking,arch,ia64: Fold atomic_ops
locking,arch,hexagon: Fold atomic_ops
locking,arch,cris: Fold atomic_ops
locking,arch,avr32: Fold atomic_ops
locking,arch,arm64: Fold atomic_ops
locking,arch,arm: Fold atomic_ops
...
|
|
|
Linus Torvalds
|
d6dd50e07c |
Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar: "The main changes in this cycle were: - changes related to No-CBs CPUs and NO_HZ_FULL - RCU-tasks implementation - torture-test updates - miscellaneous fixes - locktorture updates - RCU documentation updates" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (81 commits) workqueue: Use cond_resched_rcu_qs macro workqueue: Add quiescent state between work items locktorture: Cleanup header usage locktorture: Cannot hold read and write lock locktorture: Fix __acquire annotation for spinlock irq locktorture: Support rwlocks rcu: Eliminate deadlock between CPU hotplug and expedited grace periods locktorture: Document boot/module parameters rcutorture: Rename rcutorture_runnable parameter locktorture: Add test scenario for rwsem_lock locktorture: Add test scenario for mutex_lock locktorture: Make torture scripting account for new _runnable name locktorture: Introduce torture context locktorture: Support rwsems locktorture: Add infrastructure for torturing read locks torture: Address race in module cleanup locktorture: Make statistics generic locktorture: Teach about lock debugging locktorture: Support mutexes locktorture: Add documentation ... |
|
|
Linus Torvalds
|
77c688ac87 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro: "The big thing in this pile is Eric's unmount-on-rmdir series; we finally have everything we need for that. The final piece of prereqs is delayed mntput() - now filesystem shutdown always happens on shallow stack. Other than that, we have several new primitives for iov_iter (Matt Wilcox, culled from his XIP-related series) pushing the conversion to ->read_iter()/ ->write_iter() a bit more, a bunch of fs/dcache.c cleanups and fixes (including the external name refcounting, which gives consistent behaviour of d_move() wrt procfs symlinks for long and short names alike) and assorted cleanups and fixes all over the place. This is just the first pile; there's a lot of stuff from various people that ought to go in this window. Starting with unionmount/overlayfs mess... ;-/" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (60 commits) fs/file_table.c: Update alloc_file() comment vfs: Deduplicate code shared by xattr system calls operating on paths reiserfs: remove pointless forward declaration of struct nameidata don't need that forward declaration of struct nameidata in dcache.h anymore take dname_external() into fs/dcache.c let path_init() failures treated the same way as subsequent link_path_walk() fix misuses of f_count() in ppp and netlink ncpfs: use list_for_each_entry() for d_subdirs walk vfs: move getname() from callers to do_mount() gfs2_atomic_open(): skip lookups on hashed dentry [infiniband] remove pointless assignments gadgetfs: saner API for gadgetfs_create_file() f_fs: saner API for ffs_sb_create_file() jfs: don't hash direct inode [s390] remove pointless assignment of ->f_op in vmlogrdr ->open() ecryptfs: ->f_op is never NULL android: ->f_op is never NULL nouveau: __iomem misannotations missing annotation in fs/file.c fs: namespace: suppress 'may be used uninitialized' warnings ... |
|
|
Al Viro
|
7b600f2abb |
don't need that forward declaration of struct nameidata in dcache.h anymore
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
|
|
Al Viro
|
810bb17267 |
take dname_external() into fs/dcache.c
never used outside and it's too low-level for legitimate uses outside of fs/dcache.c anyway Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
|
|
Linus Torvalds
|
5e40d331bd |
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris. Mostly ima, selinux, smack and key handling updates. * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (65 commits) integrity: do zero padding of the key id KEYS: output last portion of fingerprint in /proc/keys KEYS: strip 'id:' from ca_keyid KEYS: use swapped SKID for performing partial matching KEYS: Restore partial ID matching functionality for asymmetric keys X.509: If available, use the raw subjKeyId to form the key description KEYS: handle error code encoded in pointer selinux: normalize audit log formatting selinux: cleanup error reporting in selinux_nlmsg_perm() KEYS: Check hex2bin()'s return when generating an asymmetric key ID ima: detect violations for mmaped files ima: fix race condition on ima_rdwr_violation_check and process_measurement ima: added ima_policy_flag variable ima: return an error code from ima_add_boot_aggregate() ima: provide 'ima_appraise=log' kernel option ima: move keyring initialization to ima_init() PKCS#7: Handle PKCS#7 messages that contain no X.509 certs PKCS#7: Better handling of unsupported crypto KEYS: Overhaul key identification when searching for asymmetric keys KEYS: Implement binary asymmetric key ID handling ... |
|
|
Linus Torvalds
|
9837acff77 |
This set has a few minor updates, but the big change is the redesign
of the trampoline logic. The trampoline logic of 3.17 required a descriptor for every function that is registered to be traced and uses a trampoline. Currently, only the function graph tracer uses a trampoline, but if you were to trace all 32,000 (give or take a few thousand) functions with the function graph tracer, it would create 32,000 descriptors to let us know that there's a trampoline associated with it. This takes up a bit of memory when there's a better way to do it. The redesign now reuses the ftrace_ops' (what registers the function graph tracer) hash tables. The hash tables tell ftrace what the tracer wants to trace or doesn't want to trace. There's two of them: one that tells us what to trace, the other tells us what not to trace. If the first one is empty, it means all functions should be traced, otherwise only the ones that are listed should be. The second hash table tells us what not to trace, and if it is empty, all functions may be traced, and if there's any listed, then those should not be traced even if they exist in the first hash table. It took a bit of massaging, but now these hashes can be used to keep track of what has a trampoline and what does not, and allows the ftrace accounting to work. Now we can trace all functions when using the function graph trampoline, and avoid needing to create any special descriptors to hold all the functions that are being traced. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJUMwp6AAoJEKQekfcNnQGuIoAIAIsqvTYAnULyzKKCweEZYUfb XJzz6cN5FPGSXkoeda1ZvnfOlHjFRrWNXzXMB0jZYR2hU++pe3xjtghaNzvbRcyV wlwDUTsnz235OcOuFEspIwBamhtah96Coiwf/2z/2q6srXlHd/1TrqXB+Fpj1tEK BkAViGDUEdq/eLZX7nGen36cTb5gpNqV9NjY1CVAK6bSkU/xXk/ArqFy1qy0MPnc z/9bXdIf+Z6VnG/IzwRc2rwiMFuD1+lpjLuHEqagoHp1D4teCjWPSJl1EKCVAS40 GaCOTUZi92zIVgx8Bb28TglSla9MN65CO3E8dw6hlXUIsNz1p0eavpctnC6ac/Y= =vDpP -----END PGP SIGNATURE----- Merge tag 'trace-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "This set has a few minor updates, but the big change is the redesign of the trampoline logic. The trampoline logic of 3.17 required a descriptor for every function that is registered to be traced and uses a trampoline. Currently, only the function graph tracer uses a trampoline, but if you were to trace all 32,000 (give or take a few thousand) functions with the function graph tracer, it would create 32,000 descriptors to let us know that there's a trampoline associated with it. This takes up a bit of memory when there's a better way to do it. The redesign now reuses the ftrace_ops' (what registers the function graph tracer) hash tables. The hash tables tell ftrace what the tracer wants to trace or doesn't want to trace. There's two of them: one that tells us what to trace, the other tells us what not to trace. If the first one is empty, it means all functions should be traced, otherwise only the ones that are listed should be. The second hash table tells us what not to trace, and if it is empty, all functions may be traced, and if there's any listed, then those should not be traced even if they exist in the first hash table. It took a bit of massaging, but now these hashes can be used to keep track of what has a trampoline and what does not, and allows the ftrace accounting to work. Now we can trace all functions when using the function graph trampoline, and avoid needing to create any special descriptors to hold all the functions that are being traced" * tag 'trace-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Only disable ftrace_enabled to test buffer in selftest ftrace: Add sanity check when unregistering last ftrace_ops kernel: trace_syscalls: Replace rcu_assign_pointer() with RCU_INIT_POINTER() tracing: generate RCU warnings even when tracepoints are disabled ftrace: Replace tramp_hash with old_*_hash to save space ftrace: Annotate the ops operation on update ftrace: Grab any ops for a rec for enabled_functions output ftrace: Remove freeing of old_hash from ftrace_hash_move() ftrace: Set callback to ftrace_stub when no ops are registered ftrace: Add helper function ftrace_ops_get_func() ftrace: Add separate function for non recursive callbacks |
|
|
Linus Torvalds
|
ca321885b0 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
"This set fixes a bunch of fallout from the changes that went in during
this merge window, particularly:
- Fix fsl_pq_mdio (Claudiu Manoil) and fm10k (Pranith Kumar) build
failures.
- Several networking drivers do atomic_set() on page counts where
that's not exactly legal. From Eric Dumazet.
- Make __skb_flow_get_ports() work cleanly with unaligned data, from
Alexander Duyck.
- Fix some kernel-doc buglets in rfkill and netlabel, from Fabian
Frederick.
- Unbalanced enable_irq_wake usage in bcmgenet and systemport
drivers, from Florian Fainelli.
- pxa168_eth needs to depend on HAS_DMA, from Geert Uytterhoeven.
- Multi-dequeue in the qdisc layer severely bypasses the fairness
limits the previous code used to enforce, reintroduce in a way that
at the same time doesn't compromise bulk dequeue opportunities.
From Jesper Dangaard Brouer.
- macvlan receive path unnecessarily hops through a softirq by using
netif_rx() instead of netif_receive_skb(). From Jason Baron"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (51 commits)
net: systemport: avoid unbalanced enable_irq_wake calls
net: bcmgenet: avoid unbalanced enable_irq_wake calls
net: bcmgenet: fix off-by-one in incrementing read pointer
net: fix races in page->_count manipulation
mlx4: fix race accessing page->_count
ixgbe: fix race accessing page->_count
igb: fix race accessing page->_count
fm10k: fix race accessing page->_count
net/phy: micrel: Add clock support for KSZ8021/KSZ8031
flow-dissector: Fix alignment issue in __skb_flow_get_ports
net: filter: fix the comments
Documentation: replace __sk_run_filter with __bpf_prog_run
macvlan: optimize the receive path
macvlan: pass 'bool' type to macvlan_count_rx()
drivers: net: xgene: Add 10GbE ethtool support
drivers: net: xgene: Add 10GbE support
drivers: net: xgene: Preparing for adding 10GbE support
dtb: Add 10GbE node to APM X-Gene SoC device tree
Documentation: dts: Update section header for APM X-Gene
MAINTAINERS: Update APM X-Gene section
...
|
|
|
Linus Torvalds
|
fd9879b9bb |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux
Pull powerpc updates from Michael Ellerman: "Here's a first pull request for powerpc updates for 3.18. The bulk of the additions are for the "cxl" driver, for IBM's Coherent Accelerator Processor Interface (CAPI). Most of it's in drivers/misc, which Greg & Arnd maintain, Greg said he was happy for us to take it through our tree. There's the usual minor cleanups and fixes, including a bit of noise in drivers from some of those. A bunch of updates to our EEH code, which has been getting more testing. Several nice speedups from Anton, including 20% in clear_page(). And a bunch of updates for freescale from Scott" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (130 commits) cxl: Fix afu_read() not doing finish_wait() on signal or non-blocking cxl: Add documentation for userspace APIs cxl: Add driver to Kbuild and Makefiles cxl: Add userspace header file cxl: Driver code for powernv PCIe based cards for userspace access cxl: Add base builtin support powerpc/mm: Add hooks for cxl powerpc/opal: Add PHB to cxl mode call powerpc/mm: Add new hash_page_mm() powerpc/powerpc: Add new PCIe functions for allocating cxl interrupts cxl: Add new header for call backs and structs powerpc/powernv: Split out set MSI IRQ chip code powerpc/mm: Export mmu_kernel_ssize and mmu_linear_psize powerpc/msi: Improve IRQ bitmap allocator powerpc/cell: Make spu_flush_all_slbs() generic powerpc/cell: Move data segment faulting code out of cell platform powerpc/cell: Move spu_handle_mm_fault() out of cell platform powerpc/pseries: Use new defines when calling H_SET_MODE powerpc: Update contact info in Documentation files powerpc/perf/hv-24x7: Simplify catalog_read() ... |
|
|
Linus Torvalds
|
81ae31d782 |
xen: features and fixes for 3.18-rc0
- Add pvscsi frontend and backend drivers.
- Remove _PAGE_IOMAP PTE flag, freeing it for alternate uses.
- Try and keep memory contiguous during PV memory setup (reduces
SWIOTLB usage).
- Allow front/back drivers to use threaded irqs.
- Support large initrds in PV guests.
- Fix PVH guests in preparation for Xen 4.5
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJUNonmAAoJEFxbo/MsZsTRHAQH/inCjpCT+pkvTB0YAVfVvgMI
gUogT8G+iB2MuCNpMffGIt8TAVXwcVtnOLH9ABH3IBVehzgipIbIiVEM9YhjrYvU
1rgIKBpmZqSpjDHoIHpdHeCH67cVnRzA/PyoxZWLxPNmQ0t6bNf9yeAcCXK9PfUc
7EAblUDmPGSx9x/EUnOKNNaZSEiUJZHDBXbMBLllk1+5H1vfKnpFCRGMG0IrfI44
KVP2NX9Gfa05edMZYtH887FYyjFe2KNV6LJvE7+w7h2Dy0yIzf7y86t0l4n8gETb
plvEUJ/lu9RYzTiZY/RxgBFYVTV59EqT45brSUtoe2Jcp8GSwiHslTHdfyFBwSo=
=gw4d
-----END PGP SIGNATURE-----
Merge tag 'stable/for-linus-3.18-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull Xen updates from David Vrabel:
"Features and fixes:
- Add pvscsi frontend and backend drivers.
- Remove _PAGE_IOMAP PTE flag, freeing it for alternate uses.
- Try and keep memory contiguous during PV memory setup (reduces
SWIOTLB usage).
- Allow front/back drivers to use threaded irqs.
- Support large initrds in PV guests.
- Fix PVH guests in preparation for Xen 4.5"
* tag 'stable/for-linus-3.18-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (22 commits)
xen: remove DEFINE_XENBUS_DRIVER() macro
xen/xenbus: Remove BUG_ON() when error string trucated
xen/xenbus: Correct the comments for xenbus_grant_ring()
x86/xen: Set EFER.NX and EFER.SCE in PVH guests
xen: eliminate scalability issues from initrd handling
xen: sync some headers with xen tree
xen: make pvscsi frontend dependant on xenbus frontend
arm{,64}/xen: Remove "EXPERIMENTAL" in the description of the Xen options
xen-scsifront: don't deadlock if the ring becomes full
x86: remove the Xen-specific _PAGE_IOMAP PTE flag
x86/xen: do not use _PAGE_IOMAP PTE flag for I/O mappings
x86: skip check for spurious faults for non-present faults
xen/efi: Directly include needed headers
xen-scsiback: clean up a type issue in scsiback_make_tpg()
xen-scsifront: use GFP_ATOMIC under spin_lock
MAINTAINERS: Add xen pvscsi maintainer
xen-scsiback: Add Xen PV SCSI backend driver
xen-scsifront: Add Xen PV SCSI frontend driver
xen: Add Xen pvSCSI protocol description
xen/events: support threaded irqs for interdomain event channels
...
|
|
|
Linus Torvalds
|
ef4a48c513 |
File locking related changes for v3.18 (pile #1)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJUNZK4AAoJEAAOaEEZVoIVI08P/iM7eaIVRnqaqtWw/JBzxiba
EMDlJYUBSlv6lYk9s8RJT4bMmcmGAKSYzVAHSoPahzNcqTDdFLeDTLGxJ8uKBbjf
d1qRRdH1yZHGUzCvJq3mEendjfXn435Y3YburUxjLfmzrzW7EbMvndiQsS5dhAm9
PEZ+wrKF/zFL7LuXa1YznYrbqOD/GRsJAXGEWc3kNwfS9avephVG/RI3GtpI2PJj
RY1mf8P7+WOlrShYoEuUo5aqs01MnU70LbqGHzY8/QKH+Cb0SOkCHZPZyClpiA+G
MMJ+o2XWcif3BZYz+dobwz/FpNZ0Bar102xvm2E8fqByr/T20JFjzooTKsQ+PtCk
DetQptrU2gtyZDKtInJUQSDPrs4cvA13TW+OEB1tT8rKBnmyEbY3/TxBpBTB9E6j
eb/V3iuWnywR3iE+yyvx24Qe7Pov6deM31s46+Vj+GQDuWmAUJXemhfzPtZiYpMT
exMXTyDS3j+W+kKqHblfU5f+Bh1eYGpG2m43wJVMLXKV7NwDf8nVV+Wea962ga+w
BAM3ia4JRVgRWJBPsnre3lvGT5kKPyfTZsoG+kOfRxiorus2OABoK+SIZBZ+c65V
Xh8VH5p3qyCUBOynXlHJWFqYWe2wH0LfbPrwe9dQwTwON51WF082EMG5zxTG0Ymf
J2z9Shz68zu0ok8cuSlo
=Hhee
-----END PGP SIGNATURE-----
Merge tag 'locks-v3.18-1' of git://git.samba.org/jlayton/linux
Pull file locking related changes from Jeff Layton:
"This release is a little more busy for file locking changes than the
last:
- a set of patches from Kinglong Mee to fix the lockowner handling in
knfsd
- a pile of cleanups to the internal file lease API. This should get
us a bit closer to allowing for setlease methods that can block.
There are some dependencies between mine and Bruce's trees this cycle,
and I based my tree on top of the requisite patches in Bruce's tree"
* tag 'locks-v3.18-1' of git://git.samba.org/jlayton/linux: (26 commits)
locks: fix fcntl_setlease/getlease return when !CONFIG_FILE_LOCKING
locks: flock_make_lock should return a struct file_lock (or PTR_ERR)
locks: set fl_owner for leases to filp instead of current->files
locks: give lm_break a return value
locks: __break_lease cleanup in preparation of allowing direct removal of leases
locks: remove i_have_this_lease check from __break_lease
locks: move freeing of leases outside of i_lock
locks: move i_lock acquisition into generic_*_lease handlers
locks: define a lm_setup handler for leases
locks: plumb a "priv" pointer into the setlease routines
nfsd: don't keep a pointer to the lease in nfs4_file
locks: clean up vfs_setlease kerneldoc comments
locks: generic_delete_lease doesn't need a file_lock at all
nfsd: fix potential lease memory leak in nfs4_setlease
locks: close potential race in lease_get_mtime
security: make security_file_set_fowner, f_setown and __f_setown void return
locks: consolidate "nolease" routines
locks: remove lock_may_read and lock_may_write
lockd: rip out deferred lock handling from testlock codepath
NFSD: Get reference of lockowner when coping file_lock
...
|
|
|
Linus Torvalds
|
90d0c376f5 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs updates from Chris Mason: "The largest set of changes here come from Miao Xie. He's cleaning up and improving read recovery/repair for raid, and has a number of related fixes. I've merged another set of fsync fixes from Filipe, and he's also improved the way we handle metadata write errors to make sure we force the FS readonly if things go wrong. Otherwise we have a collection of fixes and cleanups. Dave Sterba gets a cookie for removing the most lines (thanks Dave)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (139 commits) btrfs: Fix compile error when CONFIG_SECURITY is not set. Btrfs: fix compiles when CONFIG_BTRFS_FS_RUN_SANITY_TESTS is off btrfs: Make btrfs handle security mount options internally to avoid losing security label. Btrfs: send, don't delay dir move if there's a new parent inode btrfs: add more superblock checks Btrfs: fix race in WAIT_SYNC ioctl Btrfs: be aware of btree inode write errors to avoid fs corruption Btrfs: remove redundant btrfs_verify_qgroup_counts declaration. btrfs: fix shadow warning on cmp Btrfs: fix compilation errors under DEBUG Btrfs: fix crash of btrfs_release_extent_buffer_page Btrfs: add missing end_page_writeback on submit_extent_page failure btrfs: Fix the wrong condition judgment about subset extent map Btrfs: fix build_backref_tree issue with multiple shared blocks Btrfs: cleanup error handling in build_backref_tree btrfs: move checks for DUMMY_ROOT into a helper btrfs: new define for the inline extent data start btrfs: kill extent_buffer_page helper btrfs: drop constant param from btrfs_release_extent_buffer_page btrfs: hide typecast to definition of BTRFS_SEND_TRANS_STUB ... |
|
|
Linus Torvalds
|
27a9716bc8 |
VFIO updates for v3.18-rc1
- Nested IOMMU extension to type1 (Will Deacon) - Restore MSIx message before enabling (Gavin Shan) - Fix remove path locking (Alex Williamson) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJUOOETAAoJECObm247sIsihDQP/jADEe9KFu4ymWu7rqi24w1L 81hGNLXlfx2PPomluN3jENpyueo7vWdP5yZ8q/bi6oF6UbShL8Po01UKHOJzJJwW 8GW86YcNsmPz/jl8Jcdbkex3dKvT1OzrDjFjCiKTJBHxE9nEdtWlRV8mO1pwd00t YFiXF8xFbkpHExMiQNU36rq/fzZCTOu4ZpCK9kDT7Sy+lsKAnGoXuM1IZK+7DGJo jcsMF32DVDmji6riy3uHHPc0qprP24QNVy6FfOmLEUvuOEIUOxMAYM9je9mmsHeS CeR/NHexr4RgYQE33jL1w8A1saT0rbu7DSKSa7OQebnY2Zte+oncLtqFZR2/Wylh jBU5r7P3PdxM6ykqEeC/3ytx7iFX6c7jc0SU4I5m8bFexmUQXqOko28gGIt0OL3n R8CmNF/MDs3gqYprhW6MvSJI1diY1+pX7pX0e7k7lDAoZ1QOjPNSGv+YOfF3H1YB AggIVxIKXW0T0bQ/hKcQiDKkxQ88vi1hld2LknbiBW9nMNLjNkxl2RZSGunFvWWN LzOYkBgR6rrTbhTvsWApsfYguYtGkgAGGJZSR1oev0BJnx4UHOfL1bykJRyUHdUd KDSBEni5TY65087IKD93nkyRhassszOa9XHmRDwQLxQeJCKRZi6bQRSzFZVheXIO O3XINOo2wNF1bIrfD/vR =s2+/ -----END PGP SIGNATURE----- Merge tag 'vfio-v3.18-rc1' of git://github.com/awilliam/linux-vfio Pull VFIO updates from Alex Williamson: - Nested IOMMU extension to type1 (Will Deacon) - Restore MSIx message before enabling (Gavin Shan) - Fix remove path locking (Alex Williamson) * tag 'vfio-v3.18-rc1' of git://github.com/awilliam/linux-vfio: vfio-pci: Fix remove path locking drivers/vfio: Export vfio_spapr_iommu_eeh_ioctl() with GPL vfio/pci: Restore MSIx message prior to enabling PCI: Export MSI message relevant functions vfio/iommu_type1: add new VFIO_TYPE1_NESTING_IOMMU IOMMU type iommu: introduce domain attribute for nesting IOMMUs |
|
|
Linus Torvalds
|
e98d6e7f76 |
Devicetree changes for v3.18
This branch contains bug fixes and new features for the devicetree code. Most of the changes are either new testcases for the selftest code or documentation changes. The most notable change is the addition of a phandle resolver for use when grafting in a second device tree blob into the core tree. The resolver isn't currently used by anything other than the selftest module, but it will be used to support device tree overlays; probably in the v3.19 timeframe. Also note that I've moved my normal tree from git.secretlab.ca to git.kernel.org. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJUOEytAAoJEMWQL496c2LNq9AP/RPbMr7rPLX3flHJbWOeHCF7 U1TzAZDoBdl7xHFCrsLF5yQlt5rGleJinMxphf8XK9Aui7L18NO4LDqoYGeGOC/u hYPcfpLuyRJiBr2xVyt+e0zivPe62P5618wUP4DmqZq7rQ3IYR71bR/g2K4N33VG LLD4HmQUCfAUpsF9ruijSShM9ez21oloURSR02xD+yvCfqpXjaysp5XLDJJQLfql O2E084QOk0d5LI+buTdmenMzuOAa8TrmDwdEKpbL4maf4Frr7H5QQnQ7xrIkUR0w Lu9XxjGhmNG4iLSQcH4lmWpzf6N9nHvfVmjhCZ3UdpYc651v6sb0Lyi8rYWMne2E rUoOSpfmUgQ1WlAsFp5R6USUyrJd1Xe0hlqwCwVl97psNLBcZrYmi7YEYWugAAep IBHrJk80exBVASErUXr4dgRI257AuHMhIiJxlyaec+mSGJBIzjdjrJbZDtdKVPWw liY0PthfFPJUWTjmWiiDK00m3dtpoxnw/ugTAYAKuQGCyXdgcMKNJxwJtpts8kxY jDCaNpr1Jf69b0nn1HSlmI40QVgjOnPfNvXGVbQBMxzHorxb1GEiv/uGFavw2bzo aEZjxq1/uKMWyvkbJSsGQjGQXuKKwyj5iJ0sSd6U2JfD4Pze+1o+FaWMGo6Bcz7o tpbR+vQRBIV2f6pc4PzR =VYfI -----END PGP SIGNATURE----- Merge tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux Pull devicetree changes from Grant Likely: "This branch contains bug fixes and new features for the devicetree code. Most of the changes are either new testcases for the selftest code or documentation changes. The most notable change is the addition of a phandle resolver for use when grafting in a second device tree blob into the core tree. The resolver isn't currently used by anything other than the selftest module, but it will be used to support device tree overlays; probably in the v3.19 timeframe. Also note that I've moved my normal tree from git.secretlab.ca to git.kernel.org" * tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux: of/selftest: Move hash table off stack to fix large frame size To remove non-ascii characters in of_selftest.txt of/selftest: Use the resolver to fixup phandles of: Introduce Device Tree resolve support. of/selftest: Add a test for duplicate phandles of: Don't try to search when phandle == 0 of/selftest: Test structure of device tree of: Fix NULL dereference in selftest removal code of: add vendor prefix for Chipidea of: Add vendor prefix for Innolux Corporation of: Add vendor prefix for Sitronix devicetree: bindings: Document Gateworks vendor prefix of: Add vendor prefix for Energy Micro dt/documentation: add specification of dma bus information |
|
|
Linus Torvalds
|
f43b179bbd |
MMC core:
- Fix SDIO IRQ bug. - MMC regulator improvements. - Fix slot-gpio card detect bug. - Add support for Driver Stage Register. - Convert the common MMC OF parser to use GPIO descriptors. - Convert MMC_CAP2_NO_MULTI_READ into a callback, ->multi_io_quirk(). - Some additional minor fixes. MMC host: - mmci: Support Qualcomm specific DML layer for DMA. - dw_mmc: Use common MMC regulators. - dw_mmc: Add support for Rock-chips RK3288. - tmio: Enable runtime PM support. - tmio: Add support for R-Car Gen2 SoCs. - tmio: Several fixes and improvements. - omap_hsmmc: Removed Balaji from MAINTAINERS. - jz4740: add DMA and pre/post support. - sdhci: Add support for Intel Braswell. - sdhci: Several fixes and improvements. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJUNoFRAAoJEP4mhCVzWIwp+oQP/3a9Rs85+lKwnaDtCotCnvps LF2R1qiFbeTgQ4XwJvOctuX0VX3/9/XTRhXq+/txA8phlXzqL5BarbXv8WfLILJJ DgXDt/lTeW1NzJ9WYjrmV/rsH7qlbyIq6I+7kXVT15M86Qqx40DF0hSx/idDKDc4 1ly4trLh0ZeqsM10AR9nu6h/ykVBblHOLSnMZXbBhtmIVshvNg+5KRQkSmwtvTKy /DswgxmuM1H1Z0T+qNejh4AZSCvxYPlwN06eqYzpYrGuoPH+SafJVws5o1G9z9SX t/A9i1QDxFtvDP0u1twEAYv0R4e3H24OPit3R8p2tgMUw683576DPYkF2A13Yzxj c3mYiTAPK8UfRc9kWxCRSkaI38URna1+t7hHRuT/Ha6DBlAvHpRL+wIu+/25XVh+ vNwOmECtT9DzmL2UP+SHLQtyyy3guAFSsFP5RJzuA5wcYeLpNYobcJJCGuziLNYi PZ55O+2HRtd7my4A7NiXAib+CXTPs4VY0XY1tBgaWHl2sxFj/mULILaf+3zxpiWg Jc8rWkUMpy1nP1OXUrCRBKbgr/loghUOEM6hozggeisDwpjh7Rm5OXZRj6JdO4QT DLCl8NQKL8Ex33XoS45LoF2uuTfLt/E52CT0Sic4JdpwvIDTwlhxQR/Yo5gWuCnQ L+J+zbclHjORG5EuIUsw =VFRY -----END PGP SIGNATURE----- Merge tag 'mmc-v3.18-1' of git://git.linaro.org/people/ulf.hansson/mmc Pull MMC updates from Ulf Hansson: "MMC core: - Fix SDIO IRQ bug - MMC regulator improvements - Fix slot-gpio card detect bug - Add support for Driver Stage Register - Convert the common MMC OF parser to use GPIO descriptors - Convert MMC_CAP2_NO_MULTI_READ into a callback, ->multi_io_quirk() - Some additional minor fixes MMC host: - mmci: Support Qualcomm specific DML layer for DMA - dw_mmc: Use common MMC regulators - dw_mmc: Add support for Rock-chips RK3288 - tmio: Enable runtime PM support - tmio: Add support for R-Car Gen2 SoCs - tmio: Several fixes and improvements - omap_hsmmc: Removed Balaji from MAINTAINERS - jz4740: add DMA and pre/post support - sdhci: Add support for Intel Braswell - sdhci: Several fixes and improvements" * tag 'mmc-v3.18-1' of git://git.linaro.org/people/ulf.hansson/mmc: (119 commits) ARM: dts: fix MMC2 regulators for Exynos5420 Arndale Octa board mmc: sdhci-acpi: Fix Braswell eMMC timeout clock frequency mmc: sdhci-acpi: Pass HID and UID to probe_slot mmc: sdhci-acpi: Get UID directly from acpi_device mmc, sdhci, bcm-kona, LLVMLinux: Remove use of __initconst mmc: sdhci-pci: Fix Braswell eMMC timeout clock frequency mmc: sdhci: Let a driver override timeout clock frequency mmc: sdhci-pci: Add Bay Trail and Braswell SD card detect mmc: sdhci-pci: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel BYT host controllers mmc: sdhci-acpi: Add a HID and UID for a SD Card host controller mmc: sdhci-acpi: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel host controllers mmc: sdhci: Add quirk for always getting TC with stop cmd mmc: core: restore detect line inversion semantics mmc: Fix incorrect warning when setting 0 Hz via debugfs mmc: Fix use of wrong device in mmc_gpiod_free_cd() mmc: atmel-mci: fix mismatched section on atmci_cleanup_slot mmc: rtsx_pci: Set power related cap2 macros mmc: core: Add new power_mode MMC_POWER_UNDEFINED mmc: sdhci: execute tuning when device is not busy mmc: atmel-mci: Release mmc resources on failure in probe .. |
|
|
Linus Torvalds
|
a2ce35273c |
sound updates for 3.18-rc1
This time it's a relatively calm update batch, but the amount isn't
too small in the end. Here we go over some highlights:
- ALSA core
- One major change is the support of nonatomic PCM operations.
This allows the trigger and other callbacks to call schedule(),
which would be useful for mailbox type communications. Already
some drivers (Digigram ones) have been converted to use together
with threaded irqs as an example.
- Improvement / fixes of DSD PCM format support
- HD-audio
- Large volume of rewrites are found in Realtek codec driver for
converting Dell and HP quirks to generic forms.
- Inverted dmic code cleanup from David.
- Realtek COEF access has been optimized.
- Now HD-audio jack infrastructure allows multiple callbacks, which
fixes / simplifies the jack-dependent power controls on STAC/IDT
and VIA codecs.
- Many additional device-specific fixups as usual
- A few deadcode cleanups, CA0132 code cleanup, etc.
- ASoC
- More componentization work from Lars-Peter, this time mainly
cleaning up the suspend and bias level transition callbacks.
- Real system support for the Intel drivers and a bunch of fixes
and enhancements for the associated CODEC drivers, this is going
to need a lot quirks over time due to the lack of any firmware
description of the boards.
- Jack detect support for simple card from Dylan Reid.
- A bunch of small fixes and enhancements for the Freescale
drivers.
- New drivers for Analog Devices SSM4567, Cirrus Logic CS35L32,
Everest Semiconductor ES8328 and Freescale cards using the ASRC
in newer i.MX processors.
- A few simple-card fixes, mostly cleanups but also a fix for
- interaction between GPIO 0 and simple-card.
- Misc
- Virtuoso / Oxygen updates by Clemens
- USB-audio: Yamaha MOTIF XF MIDI port name fixes
- Conversion of kernel messages to standard dev_*() in ctxfi
driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABAgAGBQJUNrU8AAoJEGwxgFQ9KSmkxZYQAI7DgkrCx2S1dIHij99jtJGz
FjhFSO/x8Jj0lgXkoCLRHXFgtq3iYjbyS9s0aokIpvAewD9SreVE977DsMqqZVJz
9FPOkv4keuxyJZ46mxJpYswDeazCjEYNFVbkYHhwsCiiyce8HyWMpe38tWrQfwSV
loJYbnEfjpTxFc4JPaQK3pIICRofQCZJonWv20K25pm7L8yG29jtqFsMQWjDCONb
ZVNwnvW61gl6ouuHincGGqVtj8pmkgKlU0l0bMgRNflRqRusrpQdobW56OEoM13H
Tq7xMp5Yxzg7j9sM/QzL+VAksHc1u1aBzg8XZKXjk9PsmH26h1gq98W2BDKQkMzF
U7MQaUks4x+apJcVVDoi5+15AOsyGoxNq9ahc0fe4ADTMSe94or78GaKptWMR+NK
pA2pX2zwvool4TYj+AtcK8SNwfVeBjSua9eNnNpaNTKuwPIX6Vch0O6jaEbQZSaC
92JYhqiC6HsW5tbhN3afTmeHxelBCpQfWPLVtgEl/eIhY3B72/1ZXWCCqwY+Ur8E
D3OCtuAjFnzvzr/gdHZWEnMu3HGt/xqOMVE0EHTQWokQpX2E3IF724YcttAzQakw
wS1ppeWSO5l+TkplqcqurEA7Bq1mN6bO/q9UK+iduIiYmvtNI3fDPTlXXy2SxRUz
QuIEpsIKuZFFumFksQd9
=S4IQ
-----END PGP SIGNATURE-----
Merge tag 'sound-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This time it's a relatively calm update batch, but the amount isn't
too small in the end. Here we go over some highlights:
ALSA core:
- One major change is the support of nonatomic PCM operations. This
allows the trigger and other callbacks to call schedule(), which
would be useful for mailbox type communications. Already some
drivers (Digigram ones) have been converted to use together with
threaded irqs as an example.
- Improvement / fixes of DSD PCM format support
HD-audio:
- Large volume of rewrites are found in Realtek codec driver for
converting Dell and HP quirks to generic forms.
- Inverted dmic code cleanup from David.
- Realtek COEF access has been optimized.
- Now HD-audio jack infrastructure allows multiple callbacks, which
fixes / simplifies the jack-dependent power controls on STAC/IDT
and VIA codecs.
- Many additional device-specific fixups as usual
- A few deadcode cleanups, CA0132 code cleanup, etc.
ASoC:
- More componentization work from Lars-Peter, this time mainly
cleaning up the suspend and bias level transition callbacks.
- Real system support for the Intel drivers and a bunch of fixes and
enhancements for the associated CODEC drivers, this is going to
need a lot quirks over time due to the lack of any firmware
description of the boards.
- Jack detect support for simple card from Dylan Reid.
- A bunch of small fixes and enhancements for the Freescale drivers.
- New drivers for Analog Devices SSM4567, Cirrus Logic CS35L32,
Everest Semiconductor ES8328 and Freescale cards using the ASRC in
newer i.MX processors.
- A few simple-card fixes, mostly cleanups but also a fix for
interaction between GPIO 0 and simple-card.
Misc:
- Virtuoso / Oxygen updates by Clemens
- USB-audio: Yamaha MOTIF XF MIDI port name fixes
- Conversion of kernel messages to standard dev_*() in ctxfi driver"
* tag 'sound-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (251 commits)
ASoC: mc13783: Ensure we only try to dereference valid of_nodes
ASoC: rockchip-i2s: fix infinite loop in rockchip_snd_txctrl
ALSA: hda - Add dock port support to Thinkpad L440 (71aa:501e)
ALSA: Allow pass NULL dev for snd_pci_quirk_lookup()
ASoC: imx-es8328: Fix of_node_put() call with uninitialized object
ASoC: soc-pcm: fix sig_bits determination in soc_pcm_apply_msb()
ASoC: simple-card: Initialize headphone and mic GPIO numbers
ASoC: imx-es8328: Fix missing return code in imx_es8328_probe()
ALSA: hda - Add dock support for Thinkpad T440 (17aa:2212)
ALSA: usb: caiaq: check for cdev->n_streams > 1
ASoC: 88pm860x-codec: Fix possibly missing string termination
ASoC: core: fix use after free in snd_soc_remove_platform()
ASoC: soc-dapm: fix use after free
ALSA: hda - Make the inv dmic handling for Realtek use generic parser
ALSA: hda - Add Inverted Internal mic for Samsung Ativ book 9 (NP900X3G)
ALSA: hda - Add inverted internal mic for Asus Aspire 4830T
ASoC: Intel: byt-rt5640: fix coccinelle warnings
ASoC: fsl_esai doc: Add "fsl,vf610-esai" as compatible string
ASoC: da732x: Remove unnecessary KERN_ERR in pr_err()
ASoC: simple-card: Fix detect gpio documentation.
...
|
|
|
Linus Torvalds
|
bf65dea87e |
edac updates for v3.18-rc1
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJUNsUKAAoJEAhfPr2O5OEVXSMQAJ953vtyqmMEi02NMf24NpA+ OuTmoe5c8RT7/+YD2edHzG7VgYIE1L4evVOm71XLoPwI3mmGwuAIYZAFvVXsYPtB U7xfWHpC5r29DlTQen7L0doD1NnRTQfOWFUtsHnd5ygdrzmIHToXqqN1IjoQudpK i8ttU5zshSMt1IPwFh+CXMHkp8wA11hGX4LyonmJ0WD/bCeu8kreilRrK/ehZtAU sBjzEif2+xtqAWBaxyZ0IzWBJdYBjo6u68jyifK0liM8oBZ8vov11i6cCZBuGGAy eNG6lNBmak77U187yUeeyqjbdhnPy7NPLEvvfDN/C5voGHqPkrKEjH64j54ayeaR TQ6u6VlPJ+3RXeqtRfYbMOgHAsxNMpJZLkKx0NNty073RQc2qgX8Xxs4t33+9B37 TfkoL8fnkh7Mq9x8czRw4n5X4qiw2ZeDDNX4TZPdGP2QQwP3JVDfMOzyr6x+BhMp 4TwCp+Sr9PeohyGYZ8InjRdxkA3yTrc1CbqSC00lXBe0lt9Pw4aQ9HGFQWSXxYH3 uZ8PoqBpxy3C5xvcwDQ8kjmu6y0GPtsRHAdb0G3HW3bjMiLuQbVohTxILEvg9HWr 2tSyKSfUZXJaTckXfWOVelyexkh3IHvQ0AoQFtG6qXQh2HF12S1OV7EoGxTua2Ye /XDAjKzdi12tRLlY172L =FRmr -----END PGP SIGNATURE----- Merge tag 'edac/v3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac Pull edac updates from Mauro Carvalho Chehab: "Nothing really exiting here: just one bug fix at sb_edac, and some changes to allow other drivers to use some shared PCI addresses" * tag 'edac/v3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: sb_edac: Claim a different PCI device Move Intel SNB device ids from sb_edac to pci_ids.h sb_edac: avoid INTERNAL ERROR message in EDAC with unspecified channel |
|
|
Linus Torvalds
|
4d9708ea5e |
media updates for v3.18-rc1
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJUNr9iAAoJEAhfPr2O5OEVSygP/iVpHK7JZCFSvy1ly67gUcIw zeO2q0Exm3WwApchaCNX0b9qB9A6jeaRiJtuqOgR7L8ksYorku7k12g0IrveK8e4 UhwscWw1HkYvTR3JG4Z2a8LoYiUatQCgcknICgjJ12fo2fCg2SnzbGp9jKiLqJew dx1zOgn5Hslqy+PWQULtkLo/XxdlAX8YNUhXU5q5gxCfhciaJ7Kq+tvM9NodobHG u94b10fmOclLug37b+Vpg01pxjqe+X+HbrHzbOsL7dvxW84igqzpyb9+WNH8FGZZ +oSu66faokH8rVxzkPyODT8TSwHuqafVF1IFafsFFJpYYfRWiY0SttMACVMuuB3z m6kVM9pTApmh736xvzB4JP4i/+aIu2qQftYTybQkTpn1AIy2kw8b09pOWbhEgdjl 5CfI7I2iSkSviZXMrIe51znIhdxohF7gEN8PyaPto3N1LHVnHAd7/J43nolSSnke DE0lQGk+NaGFv/MiESiKC8lSiEGzqpMkrxpOIeDZAsKxQ3ihxKai3kqAYYiPt2+n 2HVhLsmfMqdd23DGSf7LjhhLqjXKhEC/+LDsLl105keRYLN/TYZuQxieJEDikRF/ NLJcuuXUQkcsdgrAChAonu1K3roAsgZ8E6BP+814CWZ5LM4xW0kQqqKN6S88eKx2 HcIz2xwveR6sZBNZE7Kl =DUbD -----END PGP SIGNATURE----- Merge tag 'media/v3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new IR driver: hix5hd2-ir - the virtual test driver (vivi) was replaced by vivid, with has an almost complete set of features to emulate most v4l2 devices and properly test all sorts of userspace apps - the as102 driver had several bugs fixed and was properly split into a frontend and a core driver. With that, it got promoted from staging into mainstream - one new CI driver got added for CIMaX SP2/SP2HF (sp2 driver) - one new frontend driver for Toshiba ISDB-T/ISDB-S demod (tc90522) - one new PCI driver for ISDB-T/ISDB-S (pt3 driver) - saa7134 driver got support for go7007-based devices - added a new PCI driver for Techwell 68xx chipsets (tw68) - a new platform driver was added (coda) - new tuner drivers: mxl301rf and qm1d1c0042 - a new DVB USB driver was added for DVBSky S860 & similar devices - added a new SDR driver (hackrf) - usbtv got audio support - several platform drivers are now compiled with COMPILE_TEST - a series of compiler fixup patches, making sparse/spatch happier with the media stuff and removing several warnings, especially on those platform drivers that didn't use to compile on x86 - Support for several new modern devices got added - lots of other fixes, improvements and cleanups * tag 'media/v3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (544 commits) [media] ir-hix5hd2: fix build on c6x arch [media] pt3: fix DTV FE I2C driver load error paths Revert "[media] media: em28xx - remove reset_resume interface" [media] exynos4-is: fix some warnings when compiling on arm64 [media] usb drivers: use %zu instead of %zd [media] pci drivers: use %zu instead of %zd [media] dvb-frontends: use %zu instead of %zd [media] s5p-mfc: Fix several printk warnings [media] s5p_mfc_opr: Fix warnings [media] ti-vpe: Fix typecast [media] s3c-camif: fix dma_addr_t printks [media] s5p_mfc_opr_v6: get rid of warnings when compiled with 64 bits [media] s5p_mfc_opr_v5: Fix lots of warnings on x86_64 [media] em28xx: Fix identation [media] drxd: remove a dead code [media] saa7146: remove return after BUG() [media] cx88: remove return after BUG() [media] cx88: fix cards table CodingStyle [media] radio-sf16fmr2: declare some structs as static [media] radio-sf16fmi: declare pnp_attached as static ... |
|
|
Linus Torvalds
|
754c780953 |
Merge branch 'for-v3.18' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping
Pull dma-mapping update from Marek Szyprowski:
"Provide the dma write coherent api (available previously on ARM
architecture) for all other architectures, which use dma_ops-based dma
mapping implementation.
This lets one to use the same code in the device drivers regardless of
the selected architecture"
* 'for-v3.18' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
dma-mapping: Provide write-combine allocations
s390: Implement dma_{alloc,free}_attrs()
|
|
|
Linus Torvalds
|
93834c6419 |
Immutable branch with restart handler patches for v3.18
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJUJQ8/AAoJEMsfJm/On5mBMNgP+QEUHpRKJaOGU3jX/ftHH/t3 EoNUx7lZt6Q0c9MB2ySAxILYpWUujc9N0tDkRDyW7mTWunF8gEGiRN+iKaSbzcUN Y4VffRAbxBasIaBqRtpDl08ycODh6Xu1t8sAao03DdhnMNLGNNO79s3UFHsubdTC cXx9mfYR/2SHV/0BXiFvKi8ovdqUspdp9cyZO/qc0PVFGbsADx3MNGGzkvWfgvcE 6vXnKnUkZrNl5JPiG77kTKZnDsjEMXggmA9DGWKijFCJjGIbuLiuIDf63Zp+eQ52 mJMRA+ViP/dDgAxY1dkWBcF5nOBT1vTYwLfy69jEoQeHzcomiHVoDKmCSBOpeAEH G8VoasWKWYpYnlcOJb+XgkA3QTe6mOPgAPzNsbYr0Ep7hMFw66mOQgKbgi6k4Qts HHimG9pnBYpPlBUfvNh+6K4dHAm0C2IyoZyMhKWsyFH6hkhS8TVM8j0gPR8rTTmk 0a9/e2vxcFnfBe3UAJaqzWRVFsBkOHrTNpG1hvID3Oq8IeywSBXw2VMSR93+mwaB sa/GCZKlqHGpOfmtILlhiXQX0E/tTHmcrI2VqyCpX0J2CW+MiGvkcGOwKHOJciSA Cj9D68y837QU/DCpMQ6ec/5wqWqZKz8yQb8kxb6vJcL19JcVKdAiPzbuOI49C3Ux YxDWoUutzDfVoUD5RhcJ =cP1w -----END PGP SIGNATURE----- Merge tag 'restart-handler-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull restart handler infrastructure from Guenter Roeck: "This series was supposed to be pulled through various trees using it, and I did not plan to send a separate pull request. As it turns out, the pinctrl tree did not merge with it, is now upstream, and uses it, meaning there are now build failures. Please pull this series directly to fix those build failures" * tag 'restart-handler-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: arm/arm64: unexport restart handlers watchdog: sunxi: register restart handler with kernel restart handler watchdog: alim7101: register restart handler with kernel restart handler watchdog: moxart: register restart handler with kernel restart handler arm: support restart through restart handler call chain arm64: support restart through restart handler call chain power/restart: call machine_restart instead of arm_pm_restart kernel: add support for kernel restart handler call chain |
|
|
Sascha Hauer
|
1fadee0c36 |
net/phy: micrel: Add clock support for KSZ8021/KSZ8031
The KSZ8021 and KSZ8031 support RMII reference input clocks of 25MHz and 50MHz. Both PHYs differ in the default frequency they expect after reset. If this differs from the actual input clock, then register 0x1f bit 7 must be changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
David S. Miller
|
7b6fa1eef6 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says: ==================== Netfilter fixes for net-next This batch contains two fixes for what you have in your net-next, they are: 1) Remove nf_send_reset6() from header file. This function now resides in the nf_reject_ipv6 module. Reported by Eric Dumazet. 2) Fix wrong NFT_REJECT_ICMPX_MAX definition and adjust code to fix errors reported by Dan Carpenter's static analysis tools. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Linus Torvalds
|
c798360cd1 |
Merge branch 'for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Pull percpu updates from Tejun Heo:
"A lot of activities on percpu front. Notable changes are...
- percpu allocator now can take @gfp. If @gfp doesn't contain
GFP_KERNEL, it tries to allocate from what's already available to
the allocator and a work item tries to keep the reserve around
certain level so that these atomic allocations usually succeed.
This will replace the ad-hoc percpu memory pool used by
blk-throttle and also be used by the planned blkcg support for
writeback IOs.
Please note that I noticed a bug in how @gfp is interpreted while
preparing this pull request and applied the fix
|
|
|
Linus Torvalds
|
b211e9d7c8 |
Merge branch 'for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo: "Nothing too interesting. Just a handful of cleanup patches" * 'for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: Revert "cgroup: remove redundant variable in cgroup_mount()" cgroup: remove redundant variable in cgroup_mount() cgroup: fix missing unlock in cgroup_release_agent() cgroup: remove CGRP_RELEASABLE flag perf/cgroup: Remove perf_put_cgroup() cgroup: remove redundant check in cgroup_ino() cpuset: simplify proc_cpuset_show() cgroup: simplify proc_cgroup_show() cgroup: use a per-cgroup work for release agent cgroup: remove bogus comments cgroup: remove redundant code in cgroup_rmdir() cgroup: remove some useless forward declarations cgroup: fix a typo in comment. |
|
|
Linus Torvalds
|
d9428f0976 |
Merge branch 'for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata update from Tejun Heo: "AHCI is getting per-port irq handling and locks for better scalability. The gain is not huge but measureable with multiple high iops devices connected to the same host; however, the value of threaded IRQ handling seems negligible for AHCI and it likely will revert to non-threaded handling soon. Another noteworthy change is George Spelvin's "libata: Un-break ATA blacklist". During 3.17 devel cycle, the libata blacklist glob matching got generalized and rewritten; unfortunately, the patch forgot to swap arguments to match the new match function and ended up breaking blacklist matching completely. It got noticed only a couple days ago so it couldn't make for-3.17-fixes either. :( Other than the above two, nothing too interesting - the usual cleanup churns and device-specific changes" * 'for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (22 commits) pata_serverworks: disable 64-KB DMA transfers on Broadcom OSB4 IDE Controller libata: Un-break ATA blacklist AHCI: Do not acquire ata_host::lock from single IRQ handler AHCI: Optimize single IRQ interrupt processing AHCI: Do not read HOST_IRQ_STAT reg in multi-MSI mode AHCI: Make few function names more descriptive AHCI: Move host activation code into ahci_host_activate() AHCI: Move ahci_host_activate() function to libahci.c AHCI: Pass SCSI host template as arg to ahci_host_activate() ata: pata_imx: Use the SIMPLE_DEV_PM_OPS() macro AHCI: Cleanup checking of multiple MSIs/SLM modes libata-sff: Fix controllers with no ctl port ahci_xgene: Fix the error print invalid resource for APM X-Gene SoC AHCI SATA Host Controller driver. libata: change ata_<foo>_printk routines to return void ata: qcom: Add device tree bindings information ahci-platform: Bump max number of clocks to 5 ahci: ahci_p5wdh_workaround - constify DMI table libahci_platform: Staticize ahci_platform_<en/dis>able_phys() pata_platform: Remove useless irq_flags field pata_of_platform: Remove "electra-ide" quirk ... |
|
|
Linus Torvalds
|
0cf744bc7a |
Merge branch 'akpm' (fixes from Andrew Morton)
Merge patch-bomb from Andrew Morton:
- part of OCFS2 (review is laggy again)
- procfs
- slab
- all of MM
- zram, zbud
- various other random things: arch, filesystems.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (164 commits)
nosave: consolidate __nosave_{begin,end} in <asm/sections.h>
include/linux/screen_info.h: remove unused ORIG_* macros
kernel/sys.c: compat sysinfo syscall: fix undefined behavior
kernel/sys.c: whitespace fixes
acct: eliminate compile warning
kernel/async.c: switch to pr_foo()
include/linux/blkdev.h: use NULL instead of zero
include/linux/kernel.h: deduplicate code implementing clamp* macros
include/linux/kernel.h: rewrite min3, max3 and clamp using min and max
alpha: use Kbuild logic to include <asm-generic/sections.h>
frv: remove deprecated IRQF_DISABLED
frv: remove unused cpuinfo_frv and friends to fix future build error
zbud: avoid accessing last unused freelist
zsmalloc: simplify init_zspage free obj linking
mm/zsmalloc.c: correct comment for fullness group computation
zram: use notify_free to account all free notifications
zram: report maximum used memory
zram: zram memory size limitation
zsmalloc: change return value unit of zs_get_total_size_bytes
zsmalloc: move pages_allocated to zs_pool
...
|
|
|
Geert Uytterhoeven
|
7f8998c7ae |
nosave: consolidate __nosave_{begin,end} in <asm/sections.h>
The different architectures used their own (and different) declarations:
extern __visible const void __nosave_begin, __nosave_end;
extern const void __nosave_begin, __nosave_end;
extern long __nosave_begin, __nosave_end;
Consolidate them using the first variant in <asm/sections.h>.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Geert Uytterhoeven
|
578b25dfce |
include/linux/screen_info.h: remove unused ORIG_* macros
The ORIG_* macros definitions to access struct screen_info members and all of their users were removed 7 years ago by commit |
|
|
Michele Curti
|
61a04e5b30 |
include/linux/blkdev.h: use NULL instead of zero
Quite useless but it shuts up some warnings. Signed-off-by: Michele Curti <michele.curti@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Michal Nazarewicz
|
c185b07fc9 |
include/linux/kernel.h: deduplicate code implementing clamp* macros
Instead of open-coding clamp_t macro min_t and max_t the way clamp macro does and instead of open-coding clamp_val simply use clamp_t. Furthermore, normalise argument naming in the macros to be lo and hi. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Cc: Mark Rustad <mark.d.rustad@intel.com> Cc: "Kirsher, Jeffrey T" <jeffrey.t.kirsher@intel.com> Cc: Hagen Paul Pfeifer <hagen@jauu.net> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Michal Nazarewicz
|
2e1d06e1c0 |
include/linux/kernel.h: rewrite min3, max3 and clamp using min and max
It appears that gcc is better at optimising a double call to min and max
rather than open coded min3 and max3. This can be observed here:
$ cat min-max.c
#define min(x, y) ({ \
typeof(x) _min1 = (x); \
typeof(y) _min2 = (y); \
(void) (&_min1 == &_min2); \
_min1 < _min2 ? _min1 : _min2; })
#define min3(x, y, z) ({ \
typeof(x) _min1 = (x); \
typeof(y) _min2 = (y); \
typeof(z) _min3 = (z); \
(void) (&_min1 == &_min2); \
(void) (&_min1 == &_min3); \
_min1 < _min2 ? (_min1 < _min3 ? _min1 : _min3) : \
(_min2 < _min3 ? _min2 : _min3); })
int fmin3(int x, int y, int z) { return min3(x, y, z); }
int fmin2(int x, int y, int z) { return min(min(x, y), z); }
$ gcc -O2 -o min-max.s -S min-max.c; cat min-max.s
.file "min-max.c"
.text
.p2align 4,,15
.globl fmin3
.type fmin3, @function
fmin3:
.LFB0:
.cfi_startproc
cmpl %esi, %edi
jl .L5
cmpl %esi, %edx
movl %esi, %eax
cmovle %edx, %eax
ret
.p2align 4,,10
.p2align 3
.L5:
cmpl %edi, %edx
movl %edi, %eax
cmovle %edx, %eax
ret
.cfi_endproc
.LFE0:
.size fmin3, .-fmin3
.p2align 4,,15
.globl fmin2
.type fmin2, @function
fmin2:
.LFB1:
.cfi_startproc
cmpl %edi, %esi
movl %edx, %eax
cmovle %esi, %edi
cmpl %edx, %edi
cmovle %edi, %eax
ret
.cfi_endproc
.LFE1:
.size fmin2, .-fmin2
.ident "GCC: (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3"
.section .note.GNU-stack,"",@progbits
fmin3 function, which uses open-coded min3 macro, is compiled into total
of ten instructions including a conditional branch, whereas fmin2
function, which uses two calls to min2 macro, is compiled into six
instructions with no branches.
Similarly, open-coded clamp produces the same code as clamp using min and
max macros, but the latter is much shorter:
$ cat clamp.c
#define clamp(val, min, max) ({ \
typeof(val) __val = (val); \
typeof(min) __min = (min); \
typeof(max) __max = (max); \
(void) (&__val == &__min); \
(void) (&__val == &__max); \
__val = __val < __min ? __min: __val; \
__val > __max ? __max: __val; })
#define min(x, y) ({ \
typeof(x) _min1 = (x); \
typeof(y) _min2 = (y); \
(void) (&_min1 == &_min2); \
_min1 < _min2 ? _min1 : _min2; })
#define max(x, y) ({ \
typeof(x) _max1 = (x); \
typeof(y) _max2 = (y); \
(void) (&_max1 == &_max2); \
_max1 > _max2 ? _max1 : _max2; })
int fclamp(int v, int min, int max) { return clamp(v, min, max); }
int fclampmm(int v, int min, int max) { return min(max(v, min), max); }
$ gcc -O2 -o clamp.s -S clamp.c; cat clamp.s
.file "clamp.c"
.text
.p2align 4,,15
.globl fclamp
.type fclamp, @function
fclamp:
.LFB0:
.cfi_startproc
cmpl %edi, %esi
movl %edx, %eax
cmovge %esi, %edi
cmpl %edx, %edi
cmovle %edi, %eax
ret
.cfi_endproc
.LFE0:
.size fclamp, .-fclamp
.p2align 4,,15
.globl fclampmm
.type fclampmm, @function
fclampmm:
.LFB1:
.cfi_startproc
cmpl %edi, %esi
cmovge %esi, %edi
cmpl %edi, %edx
movl %edi, %eax
cmovle %edx, %eax
ret
.cfi_endproc
.LFE1:
.size fclampmm, .-fclampmm
.ident "GCC: (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3"
.section .note.GNU-stack,"",@progbits
Linux mpn-glaptop 3.13.0-29-generic #53~precise1-Ubuntu SMP Wed Jun 4 22:06:25 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-rwx------ 1 mpn eng 51224656 Jun 17 14:15 vmlinux.before
-rwx------ 1 mpn eng 51224608 Jun 17 13:57 vmlinux.after
48 bytes reduction. The do_fault_around was a few instruction shorter
and as far as I can tell saved 12 bytes on the stack, i.e.:
$ grep -e rsp -e pop -e push do_fault_around.*
do_fault_around.before.s:push %rbp
do_fault_around.before.s:mov %rsp,%rbp
do_fault_around.before.s:push %r13
do_fault_around.before.s:push %r12
do_fault_around.before.s:push %rbx
do_fault_around.before.s:sub $0x38,%rsp
do_fault_around.before.s:add $0x38,%rsp
do_fault_around.before.s:pop %rbx
do_fault_around.before.s:pop %r12
do_fault_around.before.s:pop %r13
do_fault_around.before.s:pop %rbp
do_fault_around.after.s:push %rbp
do_fault_around.after.s:mov %rsp,%rbp
do_fault_around.after.s:push %r12
do_fault_around.after.s:push %rbx
do_fault_around.after.s:sub $0x30,%rsp
do_fault_around.after.s:add $0x30,%rsp
do_fault_around.after.s:pop %rbx
do_fault_around.after.s:pop %r12
do_fault_around.after.s:pop %rbp
or here side-by-side:
Before After
push %rbp push %rbp
mov %rsp,%rbp mov %rsp,%rbp
push %r13
push %r12 push %r12
push %rbx push %rbx
sub $0x38,%rsp sub $0x30,%rsp
add $0x38,%rsp add $0x30,%rsp
pop %rbx pop %rbx
pop %r12 pop %r12
pop %r13
pop %rbp pop %rbp
There are also fewer branches:
$ grep ^j do_fault_around.*
do_fault_around.before.s:jae ffffffff812079b7
do_fault_around.before.s:jmp ffffffff812079c5
do_fault_around.before.s:jmp ffffffff81207a14
do_fault_around.before.s:ja ffffffff812079f9
do_fault_around.before.s:jb ffffffff81207a10
do_fault_around.before.s:jmp ffffffff81207a63
do_fault_around.before.s:jne ffffffff812079df
do_fault_around.after.s:jmp ffffffff812079fd
do_fault_around.after.s:ja ffffffff812079e2
do_fault_around.after.s:jb ffffffff812079f9
do_fault_around.after.s:jmp ffffffff81207a4c
do_fault_around.after.s:jne ffffffff812079c8
And here's with allyesconfig on a different machine:
$ uname -a; gcc --version; ls -l vmlinux.*
Linux erwin 3.14.7-mn #54 SMP Sun Jun 15 11:25:08 CEST 2014 x86_64 AMD Phenom(tm) II X3 710 Processor AuthenticAMD GNU/Linux
gcc (GCC) 4.8.3
Copyright (C) 2013 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-rwx------ 1 mpn eng 437027411 Jun 20 16:04 vmlinux.before
-rwx------ 1 mpn eng 437026881 Jun 20 15:30 vmlinux.after
530 bytes reduction.
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Hagen Paul Pfeifer <hagen@jauu.net>
Cc: David Rientjes <rientjes@google.com>
Cc: "Rustad, Mark D" <mark.d.rustad@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Minchan Kim
|
722cdc1723 |
zsmalloc: change return value unit of zs_get_total_size_bytes
zs_get_total_size_bytes returns a amount of memory zsmalloc consumed with *byte unit* but zsmalloc operates *page unit* rather than byte unit so let's change the API so benefit we could get is that reduce unnecessary overhead (ie, change page unit with byte unit) in zsmalloc. Since return type is pages, "zs_get_total_pages" is better than "zs_get_total_size_bytes". Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Dan Streetman <ddstreet@ieee.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: <juno.choi@lge.com> Cc: <seungho1.park@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: David Horner <ds2horner@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Konstantin Khlebnikov
|
09316c09dd |
mm/balloon_compaction: add vmstat counters and kpageflags bit
Always mark pages with PageBalloon even if balloon compaction is disabled and expose this mark in /proc/kpageflags as KPF_BALLOON. Also this patch adds three counters into /proc/vmstat: "balloon_inflate", "balloon_deflate" and "balloon_migrate". They accumulate balloon activity. Current size of balloon is (balloon_inflate - balloon_deflate) pages. All generic balloon code now gathered under option CONFIG_MEMORY_BALLOON. It should be selected by ballooning driver which wants use this feature. Currently virtio-balloon is the only user. Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Konstantin Khlebnikov
|
9d1ba80564 |
mm/balloon_compaction: remove balloon mapping and flag AS_BALLOON_MAP
Now ballooned pages are detected using PageBalloon(). Fake mapping is no longer required. This patch links ballooned pages to balloon device using field page->private instead of page->mapping. Also this patch embeds balloon_dev_info directly into struct virtio_balloon. Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Konstantin Khlebnikov
|
d6d86c0a7f |
mm/balloon_compaction: redesign ballooned pages management
Sasha Levin reported KASAN splash inside isolate_migratepages_range(). Problem is in the function __is_movable_balloon_page() which tests AS_BALLOON_MAP in page->mapping->flags. This function has no protection against anonymous pages. As result it tried to check address space flags inside struct anon_vma. Further investigation shows more problems in current implementation: * Special branch in __unmap_and_move() never works: balloon_page_movable() checks page flags and page_count. In __unmap_and_move() page is locked, reference counter is elevated, thus balloon_page_movable() always fails. As a result execution goes to the normal migration path. virtballoon_migratepage() returns MIGRATEPAGE_BALLOON_SUCCESS instead of MIGRATEPAGE_SUCCESS, move_to_new_page() thinks this is an error code and assigns newpage->mapping to NULL. Newly migrated page lose connectivity with balloon an all ability for further migration. * lru_lock erroneously required in isolate_migratepages_range() for isolation ballooned page. This function releases lru_lock periodically, this makes migration mostly impossible for some pages. * balloon_page_dequeue have a tight race with balloon_page_isolate: balloon_page_isolate could be executed in parallel with dequeue between picking page from list and locking page_lock. Race is rare because they use trylock_page() for locking. This patch fixes all of them. Instead of fake mapping with special flag this patch uses special state of page->_mapcount: PAGE_BALLOON_MAPCOUNT_VALUE = -256. Buddy allocator uses PAGE_BUDDY_MAPCOUNT_VALUE = -128 for similar purpose. Storing mark directly in struct page makes everything safer and easier. PagePrivate is used to mark pages present in page list (i.e. not isolated, like PageLRU for normal pages). It replaces special rules for reference counter and makes balloon migration similar to migration of normal pages. This flag is protected by page_lock together with link to the balloon device. Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Link: http://lkml.kernel.org/p/53E6CEAA.9020105@oracle.com Cc: Rafael Aquini <aquini@redhat.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: <stable@vger.kernel.org> [3.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Johannes Weiner
|
b70a2a21dc |
mm: memcontrol: fix transparent huge page allocations under pressure
In a memcg with even just moderate cache pressure, success rates for
transparent huge page allocations drop to zero, wasting a lot of effort
that the allocator puts into assembling these pages.
The reason for this is that the memcg reclaim code was never designed for
higher-order charges. It reclaims in small batches until there is room
for at least one page. Huge page charges only succeed when these batches
add up over a series of huge faults, which is unlikely under any
significant load involving order-0 allocations in the group.
Remove that loop on the memcg side in favor of passing the actual reclaim
goal to direct reclaim, which is already set up and optimized to meet
higher-order goals efficiently.
This brings memcg's THP policy in line with the system policy: if the
allocator painstakingly assembles a hugepage, memcg will at least make an
honest effort to charge it. As a result, transparent hugepage allocation
rates amid cache activity are drastically improved:
vanilla patched
pgalloc 4717530.80 ( +0.00%) 4451376.40 ( -5.64%)
pgfault 491370.60 ( +0.00%) 225477.40 ( -54.11%)
pgmajfault 2.00 ( +0.00%) 1.80 ( -6.67%)
thp_fault_alloc 0.00 ( +0.00%) 531.60 (+100.00%)
thp_fault_fallback 749.00 ( +0.00%) 217.40 ( -70.88%)
[ Note: this may in turn increase memory consumption from internal
fragmentation, which is an inherent risk of transparent hugepages.
Some setups may have to adjust the memcg limits accordingly to
accomodate this - or, if the machine is already packed to capacity,
disable the transparent huge page feature. ]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Dave Hansen <dave@sr71.net>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Vladimir Davydov
|
6f817f4cda |
memcg: move memcg_update_cache_size() to slab_common.c
`While growing per memcg caches arrays, we jump between memcontrol.c and
slab_common.c in a weird way:
memcg_alloc_cache_id - memcontrol.c
memcg_update_all_caches - slab_common.c
memcg_update_cache_size - memcontrol.c
There's absolutely no reason why memcg_update_cache_size can't live on the
slab's side though. So let's move it there and settle it comfortably amid
per-memcg cache allocation functions.
Besides, this patch cleans this function up a bit, removing all the
useless comments from it, and renames it to memcg_update_cache_params to
conform to memcg_alloc/free_cache_params, which we already have in
slab_common.c.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Glauber Costa <glommer@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Vladimir Davydov
|
33a690c45b |
memcg: move memcg_{alloc,free}_cache_params to slab_common.c
The only reason why they live in memcontrol.c is that we get/put css
reference to the owner memory cgroup in them. However, we can do that in
memcg_{un,}register_cache. OTOH, there are several reasons to move them
to slab_common.c.
First, I think that the less public interface functions we have in
memcontrol.h the better. Since the functions I move don't depend on
memcontrol, I think it's worth making them private to slab, especially
taking into account that the arrays are defined on the slab's side too.
Second, the way how per-memcg arrays are updated looks rather awkward: it
proceeds from memcontrol.c (__memcg_activate_kmem) to slab_common.c
(memcg_update_all_caches) and back to memcontrol.c again
(memcg_update_array_size). In the following patches I move the function
relocating the arrays (memcg_update_array_size) to slab_common.c and
therefore get rid this circular call path. I think we should have the
cache allocation stuff in the same place where we have relocation, because
it's easier to follow the code then. So I move arrays alloc/free
functions to slab_common.c too.
The third point isn't obvious. I'm going to make the list_lru structure
per-memcg to allow targeted kmem reclaim. That means we will have
per-memcg arrays in list_lrus too. It turns out that it's much easier to
update these arrays in list_lru.c rather than in memcontrol.c, because all
the stuff we need is defined there. This patch makes memcg caches arrays
allocation path conform that of the upcoming list_lru.
So let's move these functions to slab_common.c and make them static.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Glauber Costa <glommer@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Sasha Levin
|
31c9afa6db |
mm: introduce VM_BUG_ON_MM
Very similar to VM_BUG_ON_PAGE and VM_BUG_ON_VMA, dump struct_mm when the bug is hit. [akpm@linux-foundation.org: coding-style fixes] [mhocko@suse.cz: fix build] [mhocko@suse.cz: fix build some more] [akpm@linux-foundation.org: do strange things to avoid doing strange things for the comma separators] Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Dave Jones <davej@redhat.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Junxiao Bi
|
934f3072c1 |
mm: clear __GFP_FS when PF_MEMALLOC_NOIO is set
commit
|
|
|
Johannes Weiner
|
5705465174 |
mm: clean up zone flags
Page reclaim tests zone_is_reclaim_dirty(), but the site that actually sets this state does zone_set_flag(zone, ZONE_TAIL_LRU_DIRTY), sending the reader through layers indirection just to track down a simple bit. Remove all zone flag wrappers and just use bitops against zone->flags directly. It's just as readable and the lines are barely any longer. Also rename ZONE_TAIL_LRU_DIRTY to ZONE_DIRTY to match ZONE_WRITEBACK, and remove the zone_flags_t typedef. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |