When system is suspended with active audio playback to HDMI/DP, two
alternative sequences can happen at resume:
a) monitor is detected first and ALSA prepare follows normal
stream setup sequence, or
b) ALSA prepare is called first, but monitor is not yet detected,
so PCM is restarted without a pin,
In case of (b), on i915 systems, haswell_verify_D0() is not called at
resume and the pin power state may be incorrect. Result is lack of audio
after resume with no error reported back to user-space.
Fix the problem by always verifying converter and pin state in the
i915_pin_cvt_fixup().
BugLink: https://github.com/thesofproject/linux/issues/2388
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200826170306.701566-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Tegra HDA codec HW implementation has an issue related to not
swapping the 2 channel Audio Sample Packet(ASP) channel mapping.
Whatever the FL and FR mapping specified the left channel always
comes out of left speaker and right channel on right speaker. So
add condition to disallow the swapping of FL,FR during the playback.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Acked-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20200825052415.20626-2-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There's another HP desktop has buggy BIOS which flags the Port
Connectivity bit as no connection.
Apply force connectivity quirk to enable DP/HDMI audio.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200811095336.32396-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HDMI on some platforms doesn't enable audio support because its Port
Connectivity [31:30] is set to AC_JACK_PORT_NONE:
Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0b000094: OUT Detect HBR HDMI DP
Pin Default 0x58560010: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Devices: 0
Connection: 3
0x02 0x03* 0x04
For now, use a quirk to force connectivity based on SSID. If there are
more platforms affected by the same issue, we can eye for a more generic
solution.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200804155836.16252-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It's been reported that, when neither nouveau nor Nvidia graphics
driver is used, the screen starts flickering. And, after comparing
between the working case (stable 4.4.x) and the broken case, it turned
out that the problem comes from the audio component binding. The
Nvidia and AMD audio binding code clears the bus->keep_power flag
whenever snd_hdac_acomp_init() succeeds. But this doesn't mean that
the component is actually bound, but it merely indicates that it's
ready for binding. So, when both nouveau and Nvidia are blacklisted
or not ready, the driver keeps running without the audio component but
also with bus->keep_power = false. This made the driver runtime PM
kicked in and powering down when unused, which results in flickering
in the graphics side, as it seems.
For fixing the bug, this patch moves the bus->keep_power flag change
into generic_acomp_notifier_set() that is the function called from the
master_bind callback of component ops; i.e. it's guaranteed that the
binding succeeded.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208609
Fixes: 5a858e79c9 ("ALSA: hda - Disable audio component for legacy Nvidia HDMI codecs")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200728082033.23933-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
External HDMI receivers have analog circuitry that needs to be powered-on
when exiting standby, and a mechanism to detect PCM v. IEC61937 data.
These two steps take time and up to 2-3 seconds of audio may be muted
when starting playback.
Intel hardware (Haswell and beyond) can keep the link active
with a 'silent stream', so that the receiver does not go through those
two steps when valid audio is transmitted. This mechanism relies
on an setting the channel_id as 0xf, sending info packet and preventing
the codec from going to D3, which will increase the platform
static power consumption. The info packet assumes a basic 2ch stereo,
and the silent stream is enabled when connecting a monitor.
In case of format changes the detection of PCM v. IEC61937 needs to
be re-run. In this case there is no way to avoid the 2-3s mute.
The silent stream is enabled with a Kconfig option, as well as a kernel
parameter should there be a need to override the build time default.
This approach is used based on the power_save capability as an example,
but in the future, it may be used with a kcontrol,
depending on UCM support for HDaudio legacy.
Signed-off-by: Harsha Priya <harshapriya.n@intel.com>
Signed-off-by: Emmanuel Jillela <emmanuel.jillela@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/1594068797-14011-1-git-send-email-harshapriya.n@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HDMI codec driver has two debug traces printed from different
functions but with identical message content:
"HDMI: hinfo 000000006a6b84d9 not registered"
Fix this duplication and also add a bit more context in addition to raw
object pointer, to help analysis of kernel logs.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200703153818.2808592-2-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When HDMI PCM devices are opened in a specific order, with at least one
HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the
connected monitor, on recent Intel platforms (ICL/JSL and newer). While
this is not a typical sequence, at least Pulseaudio does this every time
when it is started, to discover the available PCMs.
The rootcause is an invalid assumption in hdmi_add_pin(), where the
total number of converters is assumed to be known at the time the
function is called. On older Intel platforms this held true, but after
ICL/JSL, the order how pins and converters are in the subnode list as
returned by snd_hda_get_sub_nodes(), was changed. As a result,
information for some converters was not stored to per_pin->mux_nids.
And this means some pins cannot be connected to all converters, and
application instead gets -EBUSY instead at open.
The assumption that converters are always before pins in the subnode
list, is not really a valid one. Fix the problem in hdmi_parse_codec()
by introducing separate loops for discovering converters and pins.
BugLink: https://github.com/thesofproject/linux/issues/1978
BugLink: https://github.com/thesofproject/linux/issues/2216
BugLink: https://github.com/thesofproject/linux/issues/2217
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These IDs are for upcoming NVIDIA chips with audio functions that are largely
similar to the existing ones.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200611180845.39942-1-aplattner@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This has been another very active release with a bunch of new drivers,
lots of fixes everywhere and continued core improvements from
Morimoto-san:
- Lots of core cleanups and refactorings from Morimoto-san, factoring
out common operations and making the card abstraction more solid.
- Continued work on cleaning up and improving the Intel drivers, along
with some new platform support for them.
- Fixes to make the Marvell SSPA driver work upstream.
- Support for AMD Renoir ACP, Dialog DA7212, Freescale EASRC and
i.MX8M, Intel Elkhard Lake, Maxim MAX98390, Nuvoton NAU8812 and
NAU8814 and Realtek RT1016.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl7U8IoTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0PkwB/0UF8YoNrLFb9wqo62sUAPYp2d9t6AW
qDmRdNoULlT+diyr3ufQOaW7yMgVfSN1ek2btl/IDhuy96lIVb1tVPs7mJvxDOqk
P/a5jxl0mWn0bmuMaajShtPc/IL2GAnYoLGIWZS+2U5CCQonKUL95DdlMcWn44lt
lMa6jK9KfCMMbaocic24XmZDYfyxhRBpKWQC7Mq/i6pw3yZgOTSUCkS42Koy6NXs
aDMHgCZKutigzEEZEDWDJ9LWqplALAQAiEUoKDWXBDBQ94nWbKkwjig4WDtC8Wao
sgCubdWM4fvLf102PcAkn0xYDC68zNSS3NuZTp7k5gyXzkepoyCfKviX
=8UOT
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.8' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.8
This has been another very active release with a bunch of new drivers,
lots of fixes everywhere and continued core improvements from
Morimoto-san:
- Lots of core cleanups and refactorings from Morimoto-san, factoring
out common operations and making the card abstraction more solid.
- Continued work on cleaning up and improving the Intel drivers, along
with some new platform support for them.
- Fixes to make the Marvell SSPA driver work upstream.
- Support for AMD Renoir ACP, Dialog DA7212, Freescale EASRC and
i.MX8M, Intel Elkhard Lake, Maxim MAX98390, Nuvoton NAU8812 and
NAU8814 and Realtek RT1016.
Fix the following coccicheck warning:
sound/pci/hda/patch_hdmi.c:1852:2-8: preceding lock on line 1846
After add sanity check to pass klockwork check,
The spdif_mutex should be unlock before return true
in check_non_pcm_per_cvt().
Fixes: 960a581e22 ("ALSA: hda: fix some klockwork scan warnings")
Signed-off-by: Wu Bo <wubo40@huawei.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1587907042-694161-1-git-send-email-wubo40@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A race exists between build_pcms() and build_controls() phases of codec
setup. Build_pcms() sets up notifier for jack events. If a monitor event
is received before build_controls() is run, the initial jack state is
lost and never reported via mixer controls.
The problem can be hit at least with SOF as the controller driver. SOF
calls snd_hda_codec_build_controls() in its workqueue-based probe and
this can be delayed enough to hit the race condition.
Fix the issue by invalidating the per-pin ELD information when
build_controls() is called. The existing call to hdmi_present_sense()
will update the ELD contents. This ensures initial monitor state is
correctly reflected via mixer controls.
BugLink: https://github.com/thesofproject/linux/issues/1687
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200428123836.24512-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a final step of the cleanup series: move the HDMI ELD parser
call into update_eld() function so that we can unify the calls.
The ELD validity check is unified in update_eld(), too.
Along with it, the repoll scheduling is moved to update_eld() as well,
where sync_eld_via_acomp() just passes 0 for skipping it.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Nikhil Mahale <nmahale@nvidia.com>
Link: https://lore.kernel.org/r/20200206162804.4734-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For improving the readability, move the runtime PM handling code from
hdmi_present_sense() to hdmi_present_sense_via_verbs(). Now
hdmi_present_sense() became symmetric for both audio-component and
legacy cases.
Just a minor code refactoring.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Nikhil Mahale <nmahale@nvidia.com>
Link: https://lore.kernel.org/r/20200206162804.4734-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current HDMI codec driver code manages the jack detection in two
different ways: for Intel codecs with audio component, the driver
creates snd_jack objects by itself while the standard hda_jack stuff
is used for the rest. This was basically because the audio component
doesn't need the pin sense reading and the unsol event handling, hence
it just needs to report the corresponding jacks directly.
It was a bit messy but not too messy until the driver got DP-MST
support for Nvidia that re-uses the part of dyn_pcm_assign feature
while keeping the pin sense and the unsol event handling. Now, for
DP-MST, we use hda_jack for pin sensing and unsol events but use the
own snd_jack objects. Meanwhile for non-DP-MST, hda_jack is used for
pin sense and unsol events, and the jacks are bound on hda_jack.
Moreover, there is a polling mode support where the unsol event isn't
used. For those, we also have special handling.
For simplifying those messes, this patch unifies the snd_jack handling
over all generic HDMI codes. The driver creates snd_jack objects just
like Intel codecs did in the past but now for all devices. For the
system without audio component binding, we still need the pin sense
and the unsol event handling, and those are still done with the
hda_jack table as before. But hda_jack is no longer used for the
actual snd_jack handling.
Since the hda_jack is no longer used for jack reporting, we removed
snd_hda_jack_report_sync() calls, which also allowed to simplify the
return type of hda_present_sense() and co. pin_idx_to_pcm_jack() was
simplified as well because it behaves same for all cases now.
Note that the hda_jack is still used for the simple HDMI codecs; they
are really simple enough, so no big reason to change intrusively.
Reviewed-by: Nikhil Mahale <nmahale@nvidia.com>
Link: https://lore.kernel.org/r/20200206162804.4734-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pass hda_jack_tbl object to hdmi_intrinsic_event() along with res from
hdmi_unsol_event() so that we can reduce the lookup of the same
hda_jack_tbl object again.
Minor code refactoring.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Nikhil Mahale <nmahale@nvidia.com>
Link: https://lore.kernel.org/r/20200206162804.4734-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If dyn_pcm_assign is set, different jack objects are being created
for pcm and pins.
If dyn_pcm_assign is set, generic_hdmi_build_jack() calls into
add_hdmi_jack_kctl() to create and track separate jack object for
pcm. Like sync_eld_via_acomp(), hdmi_present_sense_via_verbs() also
need to report status change of the pcm jack.
Rename pin_idx_to_jack() to pin_idx_to_pcm_jack(). Update
hdmi_present_sense_via_verbs() to report plug state of pcm jack
object. Unlike sync_eld_via_acomp(), for !acomp drivers the pcm
jack's plug state must be consistent with plug state
of pin's jack.
Fixes: 5398e94fb7 ("ALSA: hda - Add DP-MST support for NVIDIA codecs")
Reported-and-tested-by: Martin Regner <martin@larkos.de>
Signed-off-by: Nikhil Mahale <nmahale@nvidia.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200204102746.1356-1-nmahale@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The initial snd_hda_get_sub_node() can fail on certain
devices (e.g. some Chromebook models using Intel GLK).
The failure rate is very low, but as this is is part of
the probe process, end-user impact is high.
In observed cases, related hardware status registers have
expected values, but the node query still fails. Retrying
the node query does seem to help, so fix the problem by
adding retry logic to the query. This does not impact
non-Intel platforms.
BugLink: https://github.com/thesofproject/linux/issues/1642
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200120160117.29130-4-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
make W=1 reports the following warnings, fix as suggested
sound/pci/hda/patch_hdmi.c: In function ‘hdmi_non_intrinsic_event’:
sound/pci/hda/patch_hdmi.c:824:3: warning: suggest braces around empty
body in an ‘if’ statement [-Wempty-body]
824 | ;
| ^
sound/pci/hda/patch_hdmi.c:826:3: warning: suggest braces around empty
body in an ‘if’ statement [-Wempty-body]
826 | ;
| ^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200113211405.28070-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In the commit 8e85def572 ("ALSA: hda: enable regmap internal
locking"), we re-enabled the regmap lock due to the reported
regression that showed the possible concurrent accesses. It was a
temporary workaround, and there are still a few opened races even
after the revert. In this patch, we cover those still opened windows
with a proper mutex lock and disable the regmap internal lock again.
First off, the patch introduces a new snd_hdac_device.regmap_lock
mutex that is applied for each snd_hdac_regmap_*() call, including
read, write and update helpers. The mutex is applied carefully so
that it won't block the self-power-up procedure in the helper
function. Also, this assures the protection for the accesses without
regmap, too.
The snd_hdac_regmap_update_raw() is refactored to use the standard
regmap_update_bits_check() function instead of the open-code. The
non-regmap case is still open-coded but it's an easy part. The all
read and write operations are in the single mutex protection, so it's
now race-free.
In addition, a couple of new helper functions are added:
snd_hdac_regmap_update_raw_once() and snd_hdac_regmap_sync(). Both
are called from HD-audio legacy driver. The former is to initialize
the given verb bits but only once when it's not initialized yet. Due
to this condition, the function invokes regcache_cache_only(), and
it's now performed inside the regmap_lock (formerly it was racy) too.
The latter function is for simply invoking regcache_sync() inside the
regmap_lock, which is called from the codec resume call path.
Along with that, the HD-audio codec driver code is slightly modified /
simplified to adapt those new functions.
And finally, snd_hdac_regmap_read_raw(), *_write_raw(), etc are
rewritten with the helper macro. It's just for simplification because
the code logic is identical among all those functions.
Tested-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200109090104.26073-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current implementation of ALSA control API fully relies on the
callbacks of each driver, and there is no verification of the values
passed via API. This patch is an attempt to improve the situation
slightly by adding the validation code for the values stored via info
and get callbacks.
The patch adds a new kconfig, CONFIG_SND_CTL_VALIDATION. It depends
on CONFIG_SND_DEBUG and off as default since the validation would
require a slight overhead including the additional call of info
callback at each get callback invocation.
When this config is enabled, the values stored by each info callback
invocation are verified, namely:
- Whether the info type is valid
- Whether the number of enum items is non-zero
- Whether the given info count is within the allowed boundary
Similarly, the values stored at each get callback are verified as
well:
- Whether the values are within the given range
- Whether the values are aligned with the given step
- Whether any further changes are seen in the data array over the
given info count
The last point helps identifying a possibly invalid data type access,
typically a case where the info callback declares the type being
SNDRV_CTL_ELEM_TYPE_ENUMERATED while the get/put callbacks store
the values in value.integer.value[] array.
When a validation fails, the ALSA core logs an error message including
the device and the control ID, and the API call also returns an
error. So, with the new validation turned on, the driver behavior
difference may be visible on user-space, too -- it's intentional,
though, so that we can catch an error more clearly.
The patch also introduces a new ctl access type,
SNDRV_CTL_ELEM_ACCESS_SKIP_CHECK. A driver may pass this flag with
other access bits to indicate that the ctl element won't be verified.
It's useful when a driver code is specially written to access the data
greater than info->count size by some reason. For example, this flag
is actually set now in HD-audio HDMI codec driver which needs to clear
the data array in the case of the disconnected monitor.
Also, the PCM channel-map helper code is slightly modified to avoid
the false-positive hit by this validation code, too.
Link: https://lore.kernel.org/r/20200104083556.27789-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit e38e486d66 ("ALSA: hda: Modify stream stripe mask only
when needed") tried to address the regression by the unconditional
application of the stripe mask, but this caused yet another
regression for the previously working devices. Namely, the patch
clears the azx_dev->stripe flag at snd_hdac_stream_clear(), but this
may be called multiple times before restarting the stream, so this
ended up with clearance of the flag for the whole time.
This patch fixes the regression by moving the azx_dev->stripe flag
clearance at the counter-part, the close callback of HDMI codec
driver instead.
Fixes: e38e486d66 ("ALSA: hda: Modify stream stripe mask only when needed")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205855
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204477
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191214175217.31852-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit 609f548534 ("ALSA: hda: hdmi - preserve non-MST PCM
routing for Intel platforms") tried to restore the old behavior wrt
assignment of the PCM slot for Intel platforms, but this didn't do it
right. As found in the later discussion, a positive pipe id on Intel
platforms can be passed for single monitor attachment case.
This patch reverts the previous attempt and applies a simpler
workaround instead. Actually, for Intel platforms, we can handle as
if per_pin->dev_id=0, assign the primary slot at the first try. This
assures the compatible behavior with the previous versions regarding
the slot assignment.
Fixes: 609f548534 ("ALSA: hda: hdmi - preserve non-MST PCM routing for Intel platforms")
Link: https://lore.kernel.org/r/20191203154105.30414-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent commit in HD-audio stream management for changing the
stripe control seems causing a regression on some platforms. The
stripe control is currently used only by HDMI codec, and applying the
stripe mask unconditionally may lead to scratchy and static noises as
seen on some MacBooks.
For addressing the regression, this patch changes the stream
management code to apply the stripe mask conditionally only when the
codec driver requested.
Fixes: 9b6f7e7a29 ("ALSA: hda: program stripe bits for controller")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204477
Tested-by: Michael Pobega <mpobega@neverware.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191202074947.1617-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit 5398e94fb7 ("ALSA: hda - Add DP-MST support for NVIDIA codecs")
introduced a slight change of behaviour how non-MST monitors are
assigned to PCMs on Intel platforms.
In the drm_audio_component.h interface, the third parameter
to pin_eld_notify() is pipe number. On Intel platforms, this value
is -1 for MST. On other platforms, a non-zero pipe id is used to
signal MST use.
This difference leads to some subtle differences in hdmi_find_pcm_slot()
with regards to how non-MST monitors are assigned to PCMs.
This patch restores the original behaviour on Intel platforms while
keeping the new allocation policy on other platforms.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20191129143756.23941-2-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add additional check in hdmi_find_pcm_slot() to not return
a pcm index that points to unallocated pcm. This could happen
if codec driver is set up in codec->mst_no_extra_pcms mode.
On some platforms, this leads to a kernel oops in snd_ctl_notify(),
called via update_eld().
BugLink: https://github.com/thesofproject/linux/issues/1536
Fixes: 5398e94fb7 ALSA: hda - Add DP-MST support for NVIDIA codecs
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20191129143756.23941-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix regression in how intel_haswell_fixup_connect_list()
results are used in hda_read_pin_conn(). Use of
snd_hda_get_raw_connections() in hda_read_pin_conn() bypasses
the cache and thus also bypasses the overridden pin connection
list. On platforms that require the connection list fixup,
mux list will be empty and HDMI playback will fail to -EBUSY
at open.
Fix the regression in hda_read_pinn_conn(). Simplify code
as suggested by Takashi Iwai to remove old
intel_haswell_fixup_connect_list() and copy the cvt_nid list
directly and not use snd_hda_override_conn_list() at all.
Fixes: 9c32fea836 ("ALSA: hda - Add DP-MST support for non-acomp codecs")
BugLink: https://github.com/thesofproject/linux/issues/1537
Cc: Nikhil Mahale <nmahale@nvidia.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20191127161240.17026-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
So that we can power down the GPU and audio to save power.
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20191122214353.582899-5-alexander.deucher@amd.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HDMI codec may leave codec->relaxed_resume flag set even after
unbinding. Clear it unconditionally.
It's very unlikely that this actually matters in the real use case,
so just a fix for consistency.
Fixes: ade49db337 ("ALSA: hda/hdmi - Allow audio component for AMD/ATI and Nvidia HDMI")
Link: https://lore.kernel.org/r/20191122132624.5482-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The old Nvidia chips have multiple HD-audio codecs on the same
HD-audio controller, and this doesn't work as expected with the current
audio component binding that is implemented under the one-codec-per-
controller assumption; at the probe time, the driver leads to several
kernel WARNING messages.
For the proper support, we may change the pin2port and port2pin to
traverse the codec list per the given pin number, but this needs more
development and testing.
As a quick workaround, instead, this patch drops the binding in the
audio side for these legacy chips since the audio component support in
nouveau graphics driver is still not merged (hence it's basically
unused).
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205625
Fixes: ade49db337 ("ALSA: hda/hdmi - Allow audio component for AMD/ATI and Nvidia HDMI")
Link: https://lore.kernel.org/r/20191122132000.4460-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds DP-MST support for GK104+ NVIDIA codecs.
GK104+ NVIDIA codecs support DP-MST audio. These codecs have 4
output converters and 4 pin widgets, with 4 device entries per pin
widget for a total of 16 device entries.
This patch moves the existing patch_nvhdmi() definition to
patch_nvhdmi_legacy(), used by pre-GK104 NVIDIA codecs. Redefine
patch_nvhdmi() to enable DP-MST support by setting codec->dp_mst and
spec->dyn_pcm_assign.
Introduce fresh logic for dynamic pcm assignment, making
sure that new pcm assignments are compatible with the legacy static
per_pin-pmc assignment that existed in the days before DP-MST.
Signed-off-by: Nikhil Mahale <nmahale@nvidia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Link: https://lore.kernel.org/r/20191119084710.29267-5-nmahale@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch make it possible for non-acomp codecs to set
dyn_pcm_assign/dp_mst and get DP-MST audio support.
Document change notification HDA040-A for the Intel High Definition
Audio 1.0a specification introduces a Device Select verb for Digital
Display Pin Widgets that are multi-stream capable. This verb selects
a Device Entry that is used by subsequent Pin Widget verbs.
Once the Device Entry is selected, all subsequent Pin Widget verbs
controlling the sink device will be directed to the selected Device
Entry until the Device Select verb is updated with a new value.
These Pin Widget verbs include:
* Connection Select
* Get Connection List Entry
* Amplifier Gain/Mute
* Power State
* Pin Widget Control
* ELD Data
* DIP-Size
* DIP-Index
* DIP-Data
* DIP-XmitCtrl
* Content Protection Control
* ASP Channel Mapping
This patch adds calls to snd_hda_set_dev_select() to direct each of
these Pin Widget control verbs to the correct Device Entry.
snd_hda_get_connections() does not return per-device connection
list, therefore make use snd_hda_get_raw_connections() instead of
snd_hda_get_connections().
Signed-off-by: Nikhil Mahale <nmahale@nvidia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Link: https://lore.kernel.org/r/20191119084710.29267-4-nmahale@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds DP-MST jack support which will be used on NVIDIA
platforms. Today, DP-MST audio is supported only if the codec has
acomp support. This patch makes it possible to add DP-MST support
for non-acomp codecs.
For the codecs supporting DP-MST audio, each pin can contain several
device entries. Each device entry is a virtual pin, described by
pin_nid and dev_id in struct hdmi_spec_per_pin. For monitor hotplug
event handling, non-acomp codecs enable and register jack-detection
for every hdmi_spec_per_pin.
This patch updates every relevant function in hda_jack.h and its
implementation in hda_jack.c, to consider dev_id along with pin_nid.
Changes to the HD Audio specification to support DP-MST audio are
described in the Intel Document Change Notification (DCN) number
HDA040-A.
From HDA040-A, "For the case of multi stream capable Digital Display
Pin Widget, [the Get Pin Sense verb] can be used to read a specific
Device Entry state as reported in Get Device List Entry verb." This
patch updates the read_pin_sense() function to take the dev_id as an
argument and pass it as a parameter to the Get Pin Sense verb.
Bits 15 through 20 from the Unsolicited Response for intrinsic
events contain the index of the Device Entry that generated the
event. This patch updates the Unsolicited Response event handlers to
extract the device entry index from the response and pass it to
snd_hda_jack_tbl_get_from_tag().
This patch updates snd_hda_jack_tbl_new() to take a dev_id argument
and store it in the jack structure, and to make sure not to generate
a different tag when called more than once for the same nid.
Signed-off-by: Nikhil Mahale <nmahale@nvidia.com>
Link: https://lore.kernel.org/r/20191119084710.29267-3-nmahale@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
s/snd_hda_pin_sense/snd_hda_jack_pin_sense/g
This aligns the snd_hda_pin_sense function name with the names of
other functions in hda_jack.h.
Signed-off-by: Nikhil Mahale <nmahale@nvidia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Link: https://lore.kernel.org/r/20191119084710.29267-2-nmahale@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Semantics of port#0 differ between ICL and TGL:
ICL port#0 -> never used for HDAudio
ICL port#1 -> should be mapped to first pin (0x04)
TGL port#0 -> typically not used, but HW has the support,
so should be mapped to first pin (0x04)
TGL port#1 -> should be mapped to 2nd pin (0x06)
Refactor the port mapping logic to allow to take the above
differences into account. Fixes issues with HDAudio on some
TGL platforms.
Co-developed-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20191115124449.20512-2-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Introduce a new flag in hdmi_spec to indicate the Intel platform-
specific fixups so that we can get rid of the lengthy codec ID
checks. The flag is set in intel_hsw_common_init() commonly.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20191111190937.19186-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply same logic to pin setup as on previous platforms. Fixes
errors in HDMI/DP playback.
Tested with both snd-hda-intel and SOF drivers.
Fixes: 9a11ba7388 ("ALSA: hda: hdmi - add Tigerlake support")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20191111133838.21213-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some big changes in the core but more about cleanps and refactorings
than new features, plus a collection of new drivers and lots of small
fixes and improvements to existing ones.
- Lots more cleanups from Morimoto-san. Now that everything is a
component this is mostly about refactorings to clarify and simplify
the core, a combination of things that are no longer required due to
refactorings and spotting similarities.
- Many fixes to the Sound Open Firmware code.
- Wake on voice support for Chromebooks.
- SPI support for RT5677.
- New drivers for Analog Devices ADAU7118, Intel Cannonlake systems
with RT1011 and RT5682, Texas Instruments TAS2562 and TAS2770.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl3EFLYTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0JCuB/40P/KPRGlEFBSJAwTfCkjQxzvQUGBy
Y3w9QeMq3ONhCJt5BusmeuFqdkanzYqnl+NveGYKdKNTAwh6vEMGiMbGSB8dgrR5
R7PLNBDRJi7ZUDdOZle7VrdUiZWyieaZk/ecWxfTPKfqzoBjnM3XYSa30i55hvbQ
A2MTimFsO7nf0caLNBLqEqBjy68IHQ3tuHH27kA0MIpVNsYVrjaWfM400ot3odbg
0vMpNTM+PDcQGkWcq3sKJBOVVjmGg2Xs1yM5hv6Mu+q1zXLCtCKj+Pv+ZXC3BT6e
Yyxv/arpgvtjIU79Tv9RamVRC4jN6ZJRkThP9UW6JrX7tPCjvD+ygzPn
=4FMp
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v5.5
Some big changes in the core but more about cleanps and refactorings
than new features, plus a collection of new drivers and lots of small
fixes and improvements to existing ones.
- Lots more cleanups from Morimoto-san. Now that everything is a
component this is mostly about refactorings to clarify and simplify
the core, a combination of things that are no longer required due to
refactorings and spotting similarities.
- Many fixes to the Sound Open Firmware code.
- Wake on voice support for Chromebooks.
- SPI support for RT5677.
- New drivers for Analog Devices ADAU7118, Intel Cannonlake systems
with RT1011 and RT5682, Texas Instruments TAS2562 and TAS2770.
Rander Wang