Commit Graph

187 Commits

Author SHA1 Message Date
Breno Leitao 402e172a2c powerpc/xmon: Check before calling xive functions
Currently xmon could call XIVE functions from OPAL even if the XIVE is
disabled or does not exist in the system, as in POWER8 machines. This
causes the following exception:

 1:mon> dx
 cpu 0x1: Vector: 700 (Program Check) at [c000000423c93450]
     pc: c00000000009cfa4: opal_xive_dump+0x50/0x68
     lr: c0000000000997b8: opal_return+0x0/0x50

This patch simply checks if XIVE is enabled before calling XIVE
functions.

Fixes: 243e25112d ("powerpc/xive: Native exploitation of the XIVE interrupt controller")
Suggested-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-22 12:08:31 +02:00
Guilherme G. Piccoli 59d3391e8c powerpc/xmon: Add option to show uptime information
It might be useful to quickly get the uptime of a running system on
xmon, without needing to grab data from memory and doing math on
struct addresses.

For example, it'd be useful to check for how long after a crash a
system is on xmon shell or if some test was started after the first
test crashed (and this 2nd test crashed too into xmon).

This small patch adds the 'U' command, to accomplish this.

Suggested-by: Murilo Fossa Vicentini <muvic@linux.vnet.ibm.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
[mpe: Display units (seconds), add sync()/__delay() sequence]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-06 20:46:38 +11:00
Nicholas Piggin 064996d62a powerpc/xmon: Avoid tripping SMP hardlockup watchdog
The SMP hardlockup watchdog cross-checks other CPUs for lockups, which
causes xmon headaches because it's assuming interrupts hard disabled
means no watchdog troubles. Try to improve that by calling
touch_nmi_watchdog() in obvious places where secondaries are spinning.

Also annotate these spin loops with spin_begin/end calls.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-04 11:26:23 +11:00
Balbir Singh d1e1b351f5 powerpc/xmon: Add ISA v3.0 SPRs to SPR dump
Add support for printing the PIDR/TIDR for ISA 300 and PSSCR and PTCR
in ISA 3.0 hypervisor mode.

SPRN_PSSCR_PR is the privileged mode access and is used when we are
not in hypervisor mode.

Signed-off-by: Balbir Singh <bsingharora@gmail.com>
[mpe: Split out of larger patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-31 14:26:45 +10:00
Balbir Singh 64d66aa051 powerpc/xmon: Add AMR, UAMOR, AMOR, IAMR to SPR dump
This patch adds support to xmon for dumping the AMR, UAMOR, AMOR and
IAMR SPRs based on their supported ISA revisions.

Signed-off-by: Balbir Singh <bsingharora@gmail.com>
[mpe: Split out of larger patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-31 14:26:44 +10:00
Balbir Singh cf9159c36c powerpc/xmon: Dump all 64 bits of HDEC
ISA 3.0 defines hypervisor decrementer to be 64 bits in length.
This patch extends the print format for to be 64 bits.

Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-31 14:26:43 +10:00
Balbir Singh c47a94031e powerpc/xmon: Fix display of SPRs
Convert 0.16x to 0.16lx. Otherwise we lose the top 8 nibbles and
effectively print only the last 32 bits.

Fixes: 1846193b17 ("powerpc/xmon: Dump ISA 2.06 SPRs")
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-31 14:26:13 +10:00
Naveen N. Rao e12d94f806 powerpc/xmon: Exclude all of xmon from ftrace
Exclude core xmon files from ftrace (along with an xmon xive helper
outside of xmon/) to minimize impact of ftrace while within xmon.

Before:
  /sys/kernel/debug/tracing# grep -ci xmon available_filter_functions
  26

After:
  /sys/kernel/debug/tracing# grep -ci xmon available_filter_functions
  0

Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
[mpe: Use $(subst ..) on KBUILD_CFLAGS rather than CFLAGS_REMOVE_xxx]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-15 15:30:17 +10:00
Breno Leitao ed49f7fd64 powerpc/xmon: Disable tracing when entering xmon
If tracing is enabled and you get into xmon, the tracing buffer
continues to be updated, causing possible loss of data and unnecessary
tracing information coming from xmon functions.

This patch simple disables tracing when entering xmon, and re-enables it
if the kernel is resumed (with 'x').

Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-14 21:57:57 +10:00
Breno Leitao 4125d012ff powerpc/xmon: Dump ftrace buffers for the current CPU only
Current xmon 'dt' command dumps the tracing buffer for all the CPUs,
which makes it very hard to read due to the fact that most of
powerpc machines currently have many CPUs. Other than that, the CPU
lines are interleaved in the ftrace log.

This new option just dumps the ftrace buffer for the current CPU.

Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-14 21:57:56 +10:00
Balbir Singh efe4fbb1ac powerpc/xmon: Add patch_instruction() support for xmon
Move from mwrite() to patch_instruction() for xmon for
breakpoint addition and removal.

Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-03 23:12:19 +10:00
Nicholas Piggin 09b6c1129f powerpc/xmon: Fix compile error with PPC_8xx=y
Rearrange the code so that mode and badaddr are only defined when
they're used.

Also unsplit the string for easier grepping, and switch from CONFIG_8xx
which is deprecated to CONFIG_PPC_8xx.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-05-30 14:59:51 +10:00
Michael Neuling 8915bcd68b powerpc/xmon: Teach xmon oops about radix vectors
Currently if we take an oops caused by an 0x380 or 0x480 exception, we get a
print which assumes SLB problems. With radix, these vectors have different
meanings.

This patch updates the oops message to reflect these different meanings.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-05-01 18:52:58 +10:00
Nicholas Piggin 1cd6ed7c2e powerpc/xmon: Wait for secondaries before IPI'ing on system reset
An externally triggered system reset (e.g., via QEMU nmi command, or pseries
reset button) can cause system reset interrupts on all CPUs. In case this causes
xmon to be entered, it is undesirable for the primary (first) CPU into xmon to
trigger an NMI IPI to others, because this may cause a nested system reset
interrupt.

So spin for a time waiting for secondaries to join xmon before performing the
NMI IPI, similarly to what the crash dump code does.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Only do it when we come in from system reset, not via sysrq etc.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-28 21:26:46 +10:00
Nicholas Piggin b1ee8a3de5 powerpc/64s: Dedicated system reset interrupt stack
The system reset interrupt is used for crash/debug situations, so it is
desirable to have as little impact on the normal state of the system as
possible.

Currently it uses the current kernel stack to process the exception.
This stores into the stack which may be involved with the crash. The
stack pointer may be corrupted, or it may have overflowed.

Avoid or minimise these problems by creating a dedicated NMI stack for
the system reset interrupt to use.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-28 21:02:25 +10:00
Nicholas Piggin c4f3b52ce7 powerpc/64s: Disallow system reset vs system reset reentrancy
In preparation for using a dedicated stack for system reset interrupts,
prevent a nested system reset from recovering, in order to simplify
code that is called in crash/debug path. This allows a system reset
interrupt to just use the base stack pointer.

Keep an in_nmi nesting counter similarly to the in_mce counter. Consider
the interrrupt non-recoverable if it is taken inside another system
reset.

Interrupt nesting could be allowed similarly to MCE, but system reset
is a special case that's not for normal operation, so simplicity wins
until there is requirement for nested system reset interrupts.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-28 21:02:25 +10:00
Michael Ellerman 8567364668 powerpc/xmon: Deindent the SLB dumping logic
Currently the code that dumps SLB entries uses a double-nested if. This
means the actual dumping logic is a bit squashed. Deindent it by using
continue.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-25 00:24:59 +10:00
Michael Ellerman 3c19d5ada1 Merge branch 'topic/xive' (early part) into next
This merges the arch part of the XIVE support, leaving the final commit
with the KVM specific pieces dangling on the branch for Paul to merge
via the kvm-ppc tree.
2017-04-12 22:31:37 +10:00
Michael Ellerman 7644d5819c powerpc: Create asm/debugfs.h and move powerpc_debugfs_root there
powerpc_debugfs_root is the dentry representing the root of the
"powerpc" directory tree in debugfs.

Currently it sits in asm/debug.h, a long with some other things that
have "debug" in the name, but are otherwise unrelated.

Pull it out into a separate header, which also includes linux/debugfs.h,
and convert all the users to include debugfs.h instead of debug.h.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-11 07:46:03 +10:00
Benjamin Herrenschmidt 243e25112d powerpc/xive: Native exploitation of the XIVE interrupt controller
The XIVE interrupt controller is the new interrupt controller
found in POWER9. It supports advanced virtualization capabilities
among other things.

Currently we use a set of firmware calls that simulate the old
"XICS" interrupt controller but this is fairly inefficient.

This adds the framework for using XIVE along with a native
backend which OPAL for configuration. Later, a backend allowing
the use in a KVM or PowerVM guest will also be provided.

This disables some fast path for interrupts in KVM when XIVE is
enabled as these rely on the firmware emulation code which is no
longer available when the XIVE is used natively by Linux.

A latter patch will make KVM also directly exploit the XIVE, thus
recovering the lost performance (and more).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Fixup pr_xxx("XIVE:"...), don't split pr_xxx() strings,
 tweak Kconfig so XIVE_NATIVE selects XIVE and depends on POWERNV,
 fix build errors when SMP=n, fold in fixes from Ben:
   Don't call cpu_online() on an invalid CPU number
   Fix irq target selection returning out of bounds cpu#
   Extra sanity checks on cpu numbers
 ]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-10 21:41:34 +10:00
Guilherme G. Piccoli de78ae6c9e powerpc/xmon: add debugfs entry for xmon
Currently the xmon debugger is set only via kernel boot command-line.
It's disabled by default, and can be enabled with "xmon=on" on the
command-line. Also, xmon may be accessed via sysrq mechanism.
But we cannot enable/disable xmon in runtime, it needs kernel reload.

This patch introduces a debugfs entry for xmon, allowing user to query
its current state and change it if desired. Basically, the "xmon" file
to read from/write to is under the debugfs mount point, on powerpc
directory. It's a simple attribute, value 0 meaning xmon is disabled
and value 1 the opposite. Writing these states to the file will take
immediate effect in the debugger.

Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-28 10:52:01 +11:00
Guilherme G. Piccoli b561783c7b powerpc/xmon: drop the nobt option from xmon plus minor fixes
The xmon parameter nobt was added long time ago, by commit 26c8af5f01
("[POWERPC] print backtrace when entering xmon"). The problem that time
was that during a crash in a machine with USB keyboard, xmon wouldn't
respond to commands from the keyboard, so printing the backtrace wouldn't
be possible.

Idea then was to show automatically the backtrace on xmon crash for the
first time it's invoked (if it recovers, next time xmon won't show
backtrace automatically). The nobt parameter was added _only_ to prevent
this automatic trace show. Seems long time ago USB keyboards didn't work
that well!

We don't need this parameter anymore, the feature of auto showing the
backtrace is interesting (imagine a case of auto-reboot script),
so this patch extends the functionality, by always showing the backtrace
automatically when xmon is invoked; it removes the nobt parameter too.

Also, this patch fixes __initdata placement on xmon_early and replaces
__initcall() with modern device_initcall() on sysrq handler.

Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-28 10:52:01 +11:00
Pan Xinhui 3b5bf42b81 powerpc/xmon: Fix an unexpected xmon on/off state change
Once xmon is triggered by sysrq-x, it is enabled always afterwards even
if it is disabled during boot. This will cause a system reset interrupt
fail to dump. So keep xmon in its original state after exit.

We have several ways to set xmon on or off.
1) by a build config CONFIG_XMON_DEFAULT.
2) by a boot cmdline with xmon or xmon=early or xmon=on to enable xmon
and xmon=off to disable xmon. This value will override that in step 1.
3) by a debugfs interface, as proposed in this patchset.
And this value can override those in step 1 and 2.

Signed-off-by: Pan Xinhui <xinhui.pan@linux.vnet.ibm.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-28 10:52:00 +11:00
Ingo Molnar 3f07c01441 sched/headers: Prepare for new header dependencies before moving code to <linux/sched/signal.h>
We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/signal.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:29 +01:00
Linus Torvalds b286cedd47 powerpc updates for 4.11 part 2
Highlights include:
 
  - An update of the disassembly code used by xmon to the latest versions in
    binutils. We've received permission from all the authors of the relevant
    binutils changes to relicense their changes to the relevant files from GPLv3
    to GPLv2, for inclusion in Linux. Thanks to Peter Bergner for doing the leg
    work to get permission from everyone.
 
  - Addition of the "architected" Power9 CPU table entry, allowing us to boot
    in Power9 architected mode under a hypervisor.
 
  - Updates to the Power9 PMU code.
 
  - Implementation of clear_bit_unlock_is_negative_byte() to optimise
    unlock_page().
 
  - Freescale updates from Scott: "Highlights include 8xx breakpoints and perf,
    t1042rdb display support, and board updates."
 
 Thanks to:
   Al Viro, Andrew Donnellan, Aneesh Kumar K.V, Balbir Singh, Douglas Miller,
   Frédéric Weisbecker, Gavin Shan, Madhavan Srinivasan, Michael Roth, Nathan
   Fontenot, Naveen N. Rao, Nicholas Piggin, Peter Bergner, Paul E. McKenney,
   Rashmica Gupta, Russell Currey, Sahil Mehta, Stewart Smith.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYthsKAAoJEFHr6jzI4aWAaWMQAJ7mAwX98ncoYschPgRmmIun
 f6DtE4IonrxiZ22gp1ct4+c9OFtA+B5FXMcEhOKpfh93lg38PTDjHs9e5kfauD7+
 oTQ2Bg1eXaL48FKdmC5Vs4Kt+/J8e9guGafUC1OVIpTyyRPoZeUDH0lx+kSPV5bd
 PkL+wY/k3W0Njo8WgD1P9u3W15+BxISo/k8c7ajzKTHGBZlAvj5h2gO6XUBNMLyy
 YClB/qIymjZriSB+AeWYD79k8gPbBZPsmZG0ZF1hY060894LgqLB9mPOJdffx/DY
 H7/uP6jcsRDOXTOmyueW1SEmPoQbtysiMd1lNrCXKtC/Okr5uhn2cUhi88AsgWvd
 1QFly2lobcDAKPah/yB7YQGMAcmYvGGNuqrWaosaV2T7r0KprzUYYgCOqzvC3WSJ
 QtVatBzMIqRTMYq+3U4G1aHeCXlRazVQHDuvPby8RdR5b2gIexiqMab2eS7tSMIH
 mCOIunRIvT14g/7wxUV7tahN+ifncNxzAk4DvPO+Wc4FQ4sy7wArv2YipSaWRWtE
 u7tNdBkEwlDkKhJgRU5T0Op2PyMbHwCP8pWuz7PQIhKIcgwmP9wb07BIWG/GGIqn
 07TxJYX2ItabyEMZMsYhzILZqjLyiAaCARANB7ScbQbdP8wdcGZcwismhwnfROIU
 NuxsZg63BUDMoxk7Sauu
 =rspd
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull more powerpc updates from Michael Ellerman:
 "Highlights include:

   - an update of the disassembly code used by xmon to the latest
     versions in binutils. We've received permission from all the
     authors of the relevant binutils changes to relicense their changes
     to the relevant files from GPLv3 to GPLv2, for inclusion in Linux.
     Thanks to Peter Bergner for doing the leg work to get permission
     from everyone.

   - addition of the "architected" Power9 CPU table entry, allowing us
     to boot in Power9 architected mode under a hypervisor.

   - updates to the Power9 PMU code.

   - implementation of clear_bit_unlock_is_negative_byte() to optimise
     unlock_page().

   - Freescale updates from Scott: "Highlights include 8xx breakpoints
     and perf, t1042rdb display support, and board updates."

  Thanks to:
    Al Viro, Andrew Donnellan, Aneesh Kumar K.V, Balbir Singh, Douglas
    Miller, Frédéric Weisbecker, Gavin Shan, Madhavan Srinivasan,
    Michael Roth, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Peter
    Bergner, Paul E. McKenney, Rashmica Gupta, Russell Currey, Sahil
    Mehta, Stewart Smith"

* tag 'powerpc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (48 commits)
  powerpc: Remove leftover cputime_to_nsecs call causing build error
  powerpc/mm/hash: Always clear UPRT and Host Radix bits when setting up CPU
  powerpc/optprobes: Fix TOC handling in optprobes trampoline
  powerpc/pseries: Advertise Hot Plug Event support to firmware
  cxl: fix nested locking hang during EEH hotplug
  powerpc/xmon: Dump memory in CPU endian format
  powerpc/pseries: Revert 'Auto-online hotplugged memory'
  powerpc/powernv: Make PCI non-optional
  powerpc/64: Implement clear_bit_unlock_is_negative_byte()
  powerpc/powernv: Remove unused variable in pnv_pci_sriov_disable()
  powerpc/kernel: Remove error message in pcibios_setup_phb_resources()
  powerpc/mm: Fix typo in set_pte_at()
  pci/hotplug/pnv-php: Disable MSI and PCI device properly
  pci/hotplug/pnv-php: Disable surprise hotplug capability on conflicts
  pci/hotplug/pnv-php: Remove WARN_ON() in pnv_php_put_slot()
  powerpc: Add POWER9 architected mode to cputable
  powerpc/perf: use is_kernel_addr macro in perf_get_misc_flags()
  powerpc/perf: Avoid FAB_*_MATCH checks for power9
  powerpc/perf: Add restrictions to PMC5 in power9 DD1
  powerpc/perf: Use Instruction Counter value
  ...
2017-03-01 10:10:16 -08:00
Masahiro Yamada 9332ef9dbd scripts/spelling.txt: add "an user" pattern and fix typo instances
Fix typos and add the following to the scripts/spelling.txt:

  an user||a user
  an userspace||a userspace

I also added "userspace" to the list since it is a common word in Linux.
I found some instances for "an userfaultfd", but I did not add it to the
list.  I felt it is endless to find words that start with "user" such as
"userland" etc., so must draw a line somewhere.

Link: http://lkml.kernel.org/r/1481573103-11329-4-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:46 -08:00
Michal Hocko 9af744d743 lib/show_mem.c: teach show_mem to work with the given nodemask
show_mem() allows to filter out node specific data which is irrelevant
to the allocation request via SHOW_MEM_FILTER_NODES.  The filtering is
done in skip_free_areas_node which skips all nodes which are not in the
mems_allowed of the current process.  This works most of the time as
expected because the nodemask shouldn't be outside of the allocating
task but there are some exceptions.  E.g.  memory hotplug might want to
request allocations from outside of the allowed nodes (see
new_node_page).

Get rid of this hardcoded behavior and push the allocation mask down the
show_mem path and use it instead of cpuset_current_mems_allowed.  NULL
nodemask is interpreted as cpuset_current_mems_allowed.

[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20170117091543.25850-5-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 16:41:30 -08:00
Linus Torvalds 38705613b7 powerpc updates for 4.11 part 1.
Highlights include:
 
  - Support for direct mapped LPC on POWER9, giving Linux direct access to
    devices that may be on there such as a UART.
 
  - Memory hotplug support for the Power9 Radix MMU.
 
  - Add new AUX vectors describing the processor's cache geometry, to be used by
    glibc.
 
  - The ability for a guest to ask the hypervisor to resize the guest's hash
    table, and in addition support for doing so automatically when memory is
    hotplugged into/out-of the guest. This allows the hash table to be sized
    based on the current memory usage of the guest, rather than the maximum
    possible memory usage.
 
  - Implementation of optprobes (kprobe optimisation) for powerpc.
 
 In addition there's the topic branch shared with the KVM tree, which includes
 support for guests to use the Radix MMU on Power9.
 
 Thanks to:
   Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T, Anton Blanchard,
   Benjamin Herrenschmidt, Chris Packham, Daniel Axtens, Daniel Borkmann, David
   Gibson, Finn Thain, Gautham R. Shenoy, Gavin Shan, Greg Kurz, Joel Stanley,
   John Allen, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Michael
   Neuling, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Paul Mackerras, Ravi
   Bangoria, Reza Arbab, Shailendra Singh, Vaibhav Jain, Wei Yongjun.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYrWj0AAoJEFHr6jzI4aWAsn4P/08Kz3TtOvDuuPGVNoO7fWOn
 ag5/zVt8R4FuCALqWpAZbVqMuUU4wLxG0RuWlmBNYYhrjMC6JxHpOSjQXxM2D7YT
 CdGTJxG414r6HMOeToL9i/z33o0m+KT07tscer+QMKlXVKCR2z0fEJch+zoPBHYA
 5eVBFpLLTtbNiX9UnrcM/vYz61d56kT4YJey9/8qbAkTAc1rMPa8ucU5UiKYJ7yX
 mF8cd7WE+7aqif9V8yN59G2rcbz+h3pbMw/gzImiYsYrUj4fLjU+VTKL5PPT+UFy
 WWBXD3MAMm1dksMMZi3hgoo2BZhDn3RkymeYi6Jo4kDknNMPZzkMxGyvaJ8Eq5H/
 bIYXdS1AbTtvaaEEuWqDFjpnChOEvj/8IeqitU0jjlql8BVjNKg/ESaaKucZr+pO
 pk2Mfvw0Tb/lxJT5qj27yq4aRsxJwdFOoPYCN7MquPp/wV2Tg5M6h4nVQ4T6Wl0S
 tMFQeCqXflhDWh0Xgr2UXpF66/YTj3Du5LasOTkgGeU30Z8TcNGFEmDWShKP3cEm
 e0oQE+OHhIGN4WSBXBAto/Gw8/0v3pXlMs+VEfeHqenwPss2sWtSwXWe8khmiy9e
 DJ48sTzj75/Zx1fiqRldw9YEnrL+NK0eOOpvzxeyKpfvdUytc+chFfEqUmO6kl3Z
 DW2UmlZxmW+b0SfexCHL
 =Icle
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Highlights include:

   - Support for direct mapped LPC on POWER9, giving Linux direct access
     to devices that may be on there such as a UART.

   - Memory hotplug support for the Power9 Radix MMU.

   - Add new AUX vectors describing the processor's cache geometry, to
     be used by glibc.

   - The ability for a guest to ask the hypervisor to resize the guest's
     hash table, and in addition support for doing so automatically when
     memory is hotplugged into/out-of the guest. This allows the hash
     table to be sized based on the current memory usage of the guest,
     rather than the maximum possible memory usage.

   - Implementation of optprobes (kprobe optimisation) for powerpc.

  In addition there's the topic branch shared with the KVM tree, which
  includes support for guests to use the Radix MMU on Power9.

  Thanks to:
    Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T, Anton
    Blanchard, Benjamin Herrenschmidt, Chris Packham, Daniel Axtens,
    Daniel Borkmann, David Gibson, Finn Thain, Gautham R. Shenoy, Gavin
    Shan, Greg Kurz, Joel Stanley, John Allen, Madhavan Srinivasan,
    Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Nathan Fontenot,
    Naveen N. Rao, Nicholas Piggin, Paul Mackerras, Ravi Bangoria, Reza
    Arbab, Shailendra Singh, Vaibhav Jain, Wei Yongjun"

* tag 'powerpc-4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (129 commits)
  powerpc/mm/radix: Skip ptesync in pte update helpers
  powerpc/mm/radix: Use ptep_get_and_clear_full when clearing pte for full mm
  powerpc/mm/radix: Update pte update sequence for pte clear case
  powerpc/mm: Update PROTFAULT handling in the page fault path
  powerpc/xmon: Fix data-breakpoint
  powerpc/mm: Fix build break with BOOK3S_64=n and MEMORY_HOTPLUG=y
  powerpc/mm: Fix build break when CMA=n && SPAPR_TCE_IOMMU=y
  powerpc/mm: Fix build break with RADIX=y & HUGETLBFS=n
  powerpc/pseries: Fix typo in parameter description
  powerpc/kprobes: Remove kprobe_exceptions_notify()
  kprobes: Introduce weak variant of kprobe_exceptions_notify()
  powerpc/ftrace: Fix confusing help text for DISABLE_MPROFILE_KERNEL
  powerpc/powernv: Fix opal_exit tracepoint opcode
  powerpc: Add a prototype for mcount() so it can be versioned
  powerpc: Drop GPL from of_node_to_nid() export to match other arches
  powerpc/kprobes: Optimize kprobe in kretprobe_trampoline()
  powerpc/kprobes: Implement Optprobes
  powerpc/kprobes: Fixes for kprobe_lookup_name() on BE
  powerpc: Add helper to check if offset is within relative branch range
  powerpc/bpf: Introduce __PPC_SH64()
  ...
2017-02-22 10:30:38 -08:00
Douglas Miller 5e48dc0aa4 powerpc/xmon: Dump memory in CPU endian format
Extend the dump command to allow display of 2, 4, and 8 byte words in
CPU endian format. Also adds dump command for "1 byte values" for the
sake of symmetry. New commands are:

  d1	dump 1 byte values
  d2	dump 2 byte values
  d4	dump 4 byte values
  d8	dump 8 byte values

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
2017-02-21 16:00:21 +11:00
Balbir Singh 5b102782c7 powerpc/xmon: Enable disassembly files (compilation changes)
After updating ppc-dis.c, ppc-opc.c and ppc.h the following changes were
made to enable compilation and working of xmon:

  1.  Remove all disassembler_info
  2.  Use xmon's printf/print_address to output data and addresses
      respectively.
  3.  All bfd_* types and casts have been removed.
  4.  Optimizations related to opcd_indices have been removed.
  5.  The dialect is set based on cpu features.
  6.  PPC_OPCODE_CLASSIC is no longer supported in the new
      disassembler.
  7.  VLE opcode parsing and printing has been stripped.
  8.  Coding style conventions used for those routines has
      been retained and it does not match our CodingStyle.
  9.  The highest supported dialect is POWER9.
  10. Defined ATTRIBUTE_UNUSED in ppc-dis.c.
  11. Defined _(x) in ppc-dis.c.

Finally, we remove the dependency on BROKEN so that XMON_DISASSEMBLY can
be enabled again.

Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-15 20:02:42 +11:00
Balbir Singh 08d96e0b12 powerpc/xmon: Apply binutils changes to upgrade disassembly
The following commit-ids from the binutils project were applied on the
xmon branch and relicensed with the permission of the authors under
GPLv2 for the following files:

  ppc-opc.c
  ppc-dis.c
  ppc.h

Working off of binutils commit 65b650b4c746 we have now moved up to
binutils commit a5721ba270dd.

Some commit logs have been taken verbatim, some are summarized for ease
of understanding.

Here is a summary of the commits:

 33e8d5ac613d PPC7450 New.  (powerpc_opcodes): Use it in dcba.
 c3d65c1ced61 New opcodes and mask
 8dbcd839b1bb Instruction Sorting
 91eb7075e370 (powerpc_opcodes): Fix the first two operands of dquaiq.
 548b1dcfcbab ppc-opc.c (powerpc_opcodes): Remove the dcffix and dcffix.
 930bb4cfae30 Support optional L form mtmsr.
 de866fccd87d (powerpc_opcodes): Order and format.
 19a6653ce8c6 ppc e500mc support
 fa452fa6833c (ppc_cpu_t): New typedef.
 c8187e1509b2 (parse_cpu): Handle -m464.
 081ba1b3c08b Define. (PPC_OPERAND_FSL, PPC_OPERAND_FCR, PPC_OPERAND_UDI)
 9b4e57660d38 Rename altivec_or_spe to retain_flags. Handle -mvsx and -mpower7.
 899d85beadd0 (powerpc_opcodes): Enable rfci, mfpmr, mtpmr for e300.
 e1c93c699b7d (extract_sprg): Correct operand range check.
 2f3bb96af796 (powerpc_init_dialect): Do not set PPC_OPCODE_BOOKE
 1cb0a7674666 (ppc_setup_opcodes): Remove PPC_OPCODE_NOPOWER4 test
 21169fcfadfa (print_insn_powerpc): Skip insn if it is deprecated
 80890a619b85 ("dcbt", "dcbtst")
 0e55be1624c2 ("lfdepx", "stfdepx")
 066be9f7bd8e (parse_cpu): Extend -mpower7 to accept power7 and isel instructions.
 c72ab5f2c55d (powerpc_opcodes): Reorder the opcode table so that instructions
 69fe9ce501f5 (ppc_parse_cpu): New function. 	(powerpc_init_dialect)
 e401b04ca7cd (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and E500MC entries.
 70dc4e324b9a (powerpc_init_dialect): Do not choose a default dialect due to -many/-Many.
 858d7a6db20b (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva", "tlbilx"
 bdc7fcfe59f1 (powerpc_macros <extrdi>): Allow n+b of 64
 e0d602ecffb0 (md_show_usage): Document -mpcca2
 b961e85b6ebe (ppc_cpu_t): Typedef to uint64_t
 8765b5569284 (powerpc_opcodes): Remove support for the the "lxsdux", "lxvd2ux"
 634b50f2a623 Rename "ppca2" to "a2"
 9fe54b1ca1c0 (md_show_usage): Document -m476
 0dc9305793c8 Add bfd_mach_ppc_e500mc64
 ce3d2015b21b Define. bfd/ 	* archures.c (bfd_mach_ppc_titan)
 cdc51b0748c4 Add -mpwr4, -mpwr5, -mpwr5x, -mpwr6 and -mpwr7
 63d0fa4e9e57 Add PPC_OPCODE_E500MC for "e500mc64"
 cee62821d472 New Define. ("dccci"): Enable for PPCA2
 85d4ac0b3c0b Correct wclr encoding.
 51b5d4a8c5e5 (powerpc_opcodes): Enable divdeu, devweu, divde, divwe, divdeuo
 e01d869a3be2 (md_assemble): Emit APUinfo section for PPC_OPCODE_E500
 09a8ad8d8f56 (powerpc_opcodes): Revert deprecation of mfocrf, mtcrf and mtocrf on EFS.
 f2bae120dcef (PPC_OPCODE_COMMON): Expand comment.
 81a0b7e2ae09 (PPCPWR2): Add PPC_OPCODE_COMMON. (powerpc_opcodes): Add "subc"
 bdc70b4a03fd (PPC_OPCODE_32, PPC_OPCODE_BOOKE64, PPC_OPCODE_CLASSIC)
 7102e95e4943 (ppc_set_cpu): Cast PPC_OPCODE_xxx to ppc_cpu_t before inverting
 f383de6633cb (powerpc_opcodes) [lswx,lswi,stswx,stswi]: Deprecate on E500 and E500MC
 6b069ee70de3 Remove PPC_OPCODE_PPCPS
 2f7f77101279 (powerpc_opcodes): Enable icswx for POWER7
 989993d80a97 (insert_nbi, insert_rbx, FRAp, FRBp, FRSp, FRTp, NBI, RAX, RBX)
 a08fc94222d1 <drrndq, drrndq., dtstexq, dctqpq, dctqpq., dctfixq, dctfixq.
 8ebac3aae962 (ISA_V2): Define and use for relevant BO field tests
 aea77599d0db Add PPC_OPCODE_ALTIVEC2, PPC_OPCODE_E6500, PPC_OPCODE_TMR
 b240011aba98 (disassemble_init_for_target): Handle ppc init.
 d668828207c2 (powerpc_opcd_indices): Bump array size
 b9c361e0ad33 Add support for PowerPC VLE.
 e1dad58d73dc (has_tls_reloc, has_tls_get_addr_call, has_vle_insns, is_ppc_vle)
 df7b86aa4cb6 Add check that sysdep.h has been included before
 98c76446ea6b (extract_sprg): Use ALLOW8_SPRG to include VLE.
 a4ebc835cbcb (powerpc_macros): Add entries for e_extlwi to e_clrlslwi
 94caa966375d (has_vle_insns, is_ppc_vle): Delete
 c7a8dbf91f37 Change RA to RA0
 d908c8af5a1d Add necessary casts for printing integer values
 03edbe3bfb93 Add/remove PPCVLE for some 32-bit insns
 9f6a6cc022e1 <xnop, yield, mdoio, mdoom>: New extended mnemonics
 588925d06545 <RSQ, RTQ>: Use PPC_OPERAND_GPR
 8baf7b78b5d9 <"lswx">: Use RAX for the second and RBX for the third operand
 e67ed0e885d6 Changed opcode for vabsdub, vabsduh, vabsduw, mviwsplt
 fb048c26f19f (UIMM4, UIMM3, UIMM2, VXVA_MASK, VXVB_MASK, VXVAVB_MASK, VXVDVA_MASK
 382c72e90441 (VXASHB_MASK): New define
 c7a5aa9c64fc (ppc_opts) <altivec>: Use PPC_OPCODE_ALTIVEC2
 ab4437c3224f <vcfpsxws>: Fix opcode spelling
 62082a42b9cd "lfdp" and "stfdp" use DS offset.
 776fc41826bb (ppc_parse_cpu): Update prototype
 943d398f4c52 (insert_sci8, extract_sci8): Rewrite.
 5817ffd1f81c New define (PPC_OPCODE_HTM/POWER8)
 9f0682fe89d9 (extract_vlesi): Properly sign extend
 c0637f3af686 (powerpc_init_dialect): Set default dialect to power8.
 58ae08f29af8 (powerpc_opcodes): Add tdui, twui, tdu, twu, tui, tu
 4f6ffcd38d90 (powerpc_init_dialect): Use ppc_parse_cpu() to set dialect
 4b95cf5c0c75 Update copyright years
 a47622ac1bad Allow both signed and unsigned fields in PowerPC cmpli insn
 12e87fac5c76 ppc: enable msgclr and msgsnd on Power8
 8514e4db84cc Don't deprecate powerpc mftb insn
 db76a70026ab Power4 should treat mftb as extended mfspr mnemonic
 b90efa5b79ac ChangeLog rotatation and copyright year update
 c4e676f19656 powerpc: Add slbfee. instruction
 27c49e9a8fc0 powerpc: Only initialise opcode indices once
 4fff86c517ab DCBT_EO): New define
 4bc0608a8b69 Fix some PPC assembler errors
 dc302c00611b Add hwsync extended mnemonic
 99a2c5612124 Remove unused MTMSRD_L macro and re-add accidentally deleted comment
 11a0cf2ec0ed Allow for optional operands with non-zero default values
 7b9341139a69 PPC sync instruction accepts invalid and incompatible operands
 ef5a96d564a2 Remove ppc860, ppc750cl, ppc7450 insns from common ppc
 43e65147c07b Remove trailing spaces in opcodes
 6dca4fd141fd Add dscr and ctrl SPR mnemonics
 b6518b387185 Fix compile time warnings generated when compiling with clang
 36f7a9411dcd Patches for illegal ppc 500 instructions
 a680de9a980e Add assembler, disassembler and linker support for power9
 dd2887fc3de4 Reorder some power9 insns
 b817670b52b7 Enable 2 operand form of powerpc mfcr with -many
 6f2750feaf28 Copyright update for binutils
 afa8d4054b8e Delete opcodes that have been removed from ISA 3.0
 1178da445ad5 Accept valid one byte signed and unsigned values for the IMM8 operand
 e43de63c8fd1 Fix powerpc subis range
 514e58b72633 Correct "Fix powerpc subis range"
 19dfcc89e8d9 Add support for new POWER ISA 3.0 instructions
 1fe0971e41a4 add more extern C
 026122a67044 Re-add support for lbarx, lharx, stbcx. and sthcx. insns back to the E6500 cpu
 14b57c7c6a53 PowerPC VLE
 6fd3a02da554 Add support for yet some more new ISA 3.0 instructions
 dfdaec14b0db Fix some PowerPC VLE BFD issues and add some PowerPC VLE instructions
 fd486b633e87 Modify POWER9 support to match final ISA 3.0 documentation
 a5721ba270dd Disallow 3-operand cmp[l][i] for ppc64

This updates the disassembly capabilities to add support for newer
processors.

Signed-off-by: Balbir Singh <bsingharora@gmail.com>
[mpe: Reformat commit list for brevity]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-15 20:02:42 +11:00
Balbir Singh cc7639ce18 powerpc/xmon: Update ppc-dis/opc.c and ppc.h
Upgrade ppc-opc.c, ppc-dis.c and ppc.h to the versions belonging to the
following binutils commit:

  65b650b4c7463f4508bed523c24ab0031a5ae5cd
  * ppc-dis.c (print_insn_powerpc): Don't skip all operands after
    setting skip_optional.

That is the last version of those files that were licensed under GPLv2.

This leaves the code in a state that does not compile, because the
binutils code needs to be tweaked to work in the kernel. We don't fix
that in this commit, because we want to import more binutils changes in
subsequent commits. So for now we mark XMON_DISASSEMBLY as BROKEN, so it
can't be built.

Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-15 20:02:41 +11:00
Madhavan Srinivasan e71ff89c71 powerpc/xmon: Cleanup to use is_kernel_addr macro
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-02 16:44:14 +11:00
Frederic Weisbecker f828c3d0ae sched/cputime, powerpc: Migrate stolen_time field to the accounting structure
That in order to gather all cputime accumulation to the same place.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Link: http://lkml.kernel.org/r/1483636310-6557-7-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-14 09:54:12 +01:00
Frederic Weisbecker 8c8b73c481 sched/cputime, powerpc: Prepare accounting structure for cputime flush on tick
In order to prepare for CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y to delay
cputime accounting to the tick, provide finegrained accumulators to
powerpc in order to store the cputime until flushing.

While at it, normalize the name of several fields according to common
cputime naming.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Link: http://lkml.kernel.org/r/1483636310-6557-6-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-14 09:54:12 +01:00
Michael Ellerman 56144ec7c9 powerpc/xmon: Add 'dt' command to dump trace buffers
There is a nice interface for asking ftrace to dump all its tracing
buffers. The only down side for use in xmon is that it uses printk.
Depending on circumstances printk may not work when in xmon, but it also
may, so add a 'dt' command which dumps the ftrace buffers, and add a
note to the help to mentiont that it uses printk.

Calling this routine also disables tracing, which is problematic if you
return from xmon and expect the system to keep operating normally. So
after we do the dump turn tracing back on.

Both functions already have nop versions defined for when ftrace is not
enabled, so we don't need any extra #ifdefs.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-25 14:30:27 +11:00
Michael Ellerman b42d9023a3 powerpc/xmon: Don't use ld on 32-bit
In commit 31cdd0c39c ("powerpc/xmon: Fix SPR read/write commands and
add command to dump SPRs") I added two uses of the "ld" instruction in
spr_access.S. "ld" is a 64-bit instruction, so shouldn't be used on
32-bit CPUs.

Replace it with PPC_LL which is a macro that gives us either "ld" or
"lwz" depending on whether we're 64 or 32-bit.

Fixes: 31cdd0c39c ("powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs")
Cc: stable@vger.kernel.org # v4.7+
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-13 17:37:02 +10:00
Kevin Hao b92a226e52 powerpc: Move cpu_has_feature() to a separate file
We plan to use jump label for cpu_has_feature(). In order to implement
this we need to include the linux/jump_label.h in asm/cputable.h.

Unfortunately if we do that it leads to an include loop. The root of the
problem seems to be that reg.h needs cputable.h (for CPU_FTRs), and then
cputable.h via jump_label.h eventually pulls in hw_irq.h which needs
reg.h (for MSR_EE).

So move cpu_has_feature() to a separate file on its own.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Rename to cpu_has_feature.h and flesh out change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-01 11:15:03 +10:00
Michael Ellerman 719dbb2df7 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux into next
Freescale updates from Scott:

"Highlights include more 8xx optimizations, device tree updates,
and MVME7100 support."
2016-07-30 13:43:19 +10:00
Michael Ellerman e0ddf7a245 powerpc/xmon: Dump ISA 2.07 SPRs
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-14 20:26:24 +10:00
Michael Ellerman 1846193b17 powerpc/xmon: Dump ISA 2.06 SPRs
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-14 20:26:24 +10:00
Michael Ellerman 56346ad88d powerpc/xmon: Adjust spacing of existing SPRs to make room for more
Purely to make it pleasing to the eye.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-14 20:26:23 +10:00
Michael Ellerman 13629dad1e powerpc/xmon: Move static regno into its only user
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-14 20:26:23 +10:00
Michael Ellerman 5b71eff782 powerpc/xmon: Remove unused externs
None of these are used, or have been since we merged ppc & ppc64.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-14 20:26:22 +10:00
Christophe Leroy c223c90386 powerpc32: provide VIRT_CPU_ACCOUNTING
This patch provides VIRT_CPU_ACCOUTING to PPC32 architecture.
PPC32 doesn't have the PACA structure, so we use the task_info
structure to store the accounting data.

In order to reuse on PPC32 the PPC64 functions, all u64 data has
been replaced by 'unsigned long' so that it is u32 on PPC32 and
u64 on PPC64

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <oss@buserror.net>
2016-07-09 01:43:50 -05:00
Paul Mackerras 31cdd0c39c powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs
xmon has commands for reading and writing SPRs, but they don't work
currently for several reasons. They attempt to synthesize a small
function containing an mfspr or mtspr instruction and call it. However,
the instructions are on the stack, which is usually not executable.
Also, for 64-bit we set up a procedure descriptor, which is fine for the
big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the
infrastructure for catching memory errors, but that only catches data
storage interrupts and machine check interrupts, but a failed
mfspr/mtspr can generate a program interrupt or a hypervisor emulation
assist interrupt, or be a no-op.

Instead of trying to synthesize a function on the fly, this adds two new
functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an
argument and read or write the SPR. Because there is no Power ISA
instruction which takes an SPR number in a register, we have to generate
one of each possible mfspr and mtspr instruction, for all 1024 possible
SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr()
and xmon_mtspr(). However, this 16kB of code pales in comparison to the
> 130kB of PPC opcode tables used by the xmon disassembler.

To catch interrupts caused by the mfspr/mtspr instructions, we add a new
'catch_spr_faults' flag. If an interrupt occurs while it is set, we come
back into xmon() via program_check_interrupt(), _exception() and die(),
see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back
into read_spr() or write_spr().

This adds a couple of other nice features: first, a "Sa" command that
attempts to read and print out the value of all 1024 SPRs. If any mfspr
instruction acts as a no-op, then the SPR is not implemented and not
printed.

Secondly, the Sr and Sw commands detect when an SPR is not
implemented (i.e. mfspr is a no-op) and print a message to that effect
rather than printing a bogus value.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11 21:54:07 +10:00
Aneesh Kumar K.V caca285e5a powerpc/mm/radix: Use STD_MMU_64 to properly isolate hash related code
We also use MMU_FTR_RADIX to branch out from code path specific to
hash.

No functionality change.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11 21:53:45 +10:00
Douglas Miller 6dfb54049f powerpc/xmon: Add xmon command to dump process/task similar to ps(1)
Add 'P' command with optional task_struct address to dump all/one task's
information: task pointer, kernel stack pointer, PID, PPID, state
(interpreted), CPU where (last) running, and command.

Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-10 10:22:04 +11:00
Andrew Donnellan fde93a0f77 powerpc/xmon: add command to dump OPAL msglog
Add the 'do' command to dump the OPAL msglog in xmon.

Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
[mpe: Reduce the amount of ifdefery required]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-09 21:03:39 +11:00
Andrew Donnellan 2e34057929 powerpc/xmon: fix typo in usage message
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-08 22:34:52 +11:00