Commit Graph

3140 Commits

Author SHA1 Message Date
Ido Schimmel 94d302deae selftests: mlxsw: Add a test for VxLAN flooding
The device stores flood records in a singly linked list where each
record stores up to three IPv4 addresses of remote VTEPs. The test
verifies that packets are correctly flooded in various cases such as
deletion of a record in the middle of the list.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-19 17:59:44 -08:00
Ido Schimmel 99c9b084f0 selftests: mlxsw: Add a test for VxLAN configuration
Test various aspects of VxLAN offloading which are specific to mlxsw,
such as sanitization of invalid configurations and offload indication.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-19 17:59:44 -08:00
Petr Machata 3485f87cb7 selftests: forwarding: vxlan_bridge_1d_port_8472: New test
This simple wrapper reruns the VXLAN ping test with a port number of
8472.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-19 17:59:44 -08:00
Petr Machata a0b61f3d8e selftests: forwarding: vxlan_bridge_1d: Add an ECN decap test
Test that when decapsulating from VXLAN, the values of inner and outer
TOS are handled appropriately. Because VXLAN driver on its own won't
produce the arbitrary TOS combinations necessary to test this feature,
simply open-code a single ICMP packet and have mausezahn assemble it.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-19 17:59:44 -08:00
Petr Machata 1e5abfb3ff selftests: forwarding: vxlan_bridge_1d: Add an ECN encap test
Test that ECN bits in the VXLAN envelope are correctly deduced from the
overlay packet.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-19 17:59:44 -08:00
Petr Machata d417ecf533 selftests: forwarding: vxlan_bridge_1d: Add a TOS test
Test that TOS is inherited from the tunneled packet into the envelope as
configured at the VXLAN device.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-19 17:59:44 -08:00
Petr Machata b3a7ee74ee selftests: forwarding: vxlan_bridge_1d: Add a TTL test
This tests whether TTL of VXLAN envelope packets is properly set based
on the device configuration.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-19 17:59:44 -08:00
Petr Machata 50a02b0825 selftests: forwarding: vxlan_bridge_1d: Reconfigure & rerun tests
The ordering of the topology creation can have impact on whether a
driver is successful in offloading VXLAN. Therefore add a pseudo-test
that reshuffles bits of the topology, and then reruns the same suite of
tests again to make sure that the new setup is supported as well.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-19 17:59:44 -08:00
Petr Machata bfd1e27038 selftests: forwarding: vxlan_bridge_1d: Add unicast test
Test that when sending traffic to a learned MAC address, the traffic is
forwarded accurately only to the right endpoint.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-19 17:59:44 -08:00
Petr Machata edaa117efe selftests: forwarding: vxlan_bridge_1d: Add flood test
Test that when sending traffic to an unlearned MAC address, the traffic
is flooded to both remote VXLAN endpoints.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-19 17:59:44 -08:00
Petr Machata 5852fd07c4 selftests: forwarding: vxlan_bridge_1d: Add ping test
Test end-to-end reachability between local and remote endpoints.

Note that because learning is disabled on the VXLAN device, the ICMP
requests will end up being flooded to all remotes.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-19 17:59:44 -08:00
Petr Machata fd64d5a2e3 selftests: forwarding: Add a skeleton of vxlan_bridge_1d
This skeleton sets up a topology with three VXLAN endpoints: one
"local", possibly offloaded, and two "remote", formed using veth pairs
and likely purely software bridges. The "local" endpoint is connected to
host systems by a VLAN-unaware bridge.

Since VXLAN tunnels must be unique per namespace, each of the "remote"
endpoints is in its own namespace. H3 forms the bridge between the three
domains.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-19 17:59:43 -08:00
Petr Machata d1038cd0f6 selftests: forwarding: lib: Add link_stats_rx_errors_get()
Such a function will be useful for counting malformed packets in the ECN
decap test.

To that end, introduce a common handler for handling stat-fetching, and
reuse it in link_stats_tx_packets_get() and link_stats_rx_errors_get().

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-19 17:59:43 -08:00
Petr Machata d20b0f214a selftests: forwarding: ping{6, }_do(): Allow passing ping arguments
Make the ping routine more generic by allowing passing arbitrary ping
command-line arguments.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-19 17:59:43 -08:00
Petr Machata 58c7a2d19e selftests: forwarding: ping{6, }_test(): Add description argument
Have ping_test() recognize an optional argument with a description of
the test. This is handy if there are several ping test, to make it clear
which is which.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-19 17:59:43 -08:00
Petr Machata d0540d1706 selftests: forwarding: lib: Add in_ns()
In order to run a certain command inside another network namespace, it's
possible to use "ip netns exec ns command". However then one can't use
functions defined in lib.sh or a test suite.

One option is to do "ip netns exec ns bash -c command", provided that
all functions that one wishes to use (and their dependencies) are
published using "export -f". That may not be practical.

Therefore, introduce a helper in_ns(), which wraps a given command in a
boilerplate of "ip netns exec" and "source lib.sh", thus making all
library functions available. (Custom functions that a script wishes to
run within a namespace still need to be exported.)

Because quotes in "$@" aren't recognized in heredoc, hand-expand the
array in an explicit for loop, leveraging printf %q to handle proper
quoting.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-19 17:59:43 -08:00
Petr Machata 601bc1c139 selftests: forwarding: lib: Support NUM_NETIFS of 0
So far the case of NUM_NETIFS of 0 has not been interesting. However if
one wishes to reuse the lib.sh routines in a setup of a separate
namespace, being able to import like this is handy.

Therefore replace the {1..$NUM_NETIFS} references, which cause iteration
over 1 and 0, with an explicit for loop like we do in setup_wait() and
tc_offload_check(), so that for NUM_NETIFS of 0 no iteration is done.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-19 17:59:43 -08:00
David S. Miller f2be6d710d Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2018-11-19 10:55:00 -08:00
Linus Torvalds f2ce1065e7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Fix some potentially uninitialized variables and use-after-free in
    kvaser_usb can drier, from Jimmy Assarsson.

 2) Fix leaks in qed driver, from Denis Bolotin.

 3) Socket leak in l2tp, from Xin Long.

 4) RSS context allocation fix in bnxt_en from Michael Chan.

 5) Fix cxgb4 build errors, from Ganesh Goudar.

 6) Route leaks in ipv6 when removing exceptions, from Xin Long.

 7) Memory leak in IDR allocation handling of act_pedit, from Davide
    Caratti.

 8) Use-after-free of bridge vlan stats, from Nikolay Aleksandrov.

 9) When MTU is locked, do not force DF bit on ipv4 tunnels. From
    Sabrina Dubroca.

10) When NAPI cached skb is reused, we must set it to the proper initial
    state which includes skb->pkt_type. From Eric Dumazet.

11) Lockdep and non-linear SKB handling fix in tipc from Jon Maloy.

12) Set RX queue properly in various tuntap receive paths, from Matthew
    Cover.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits)
  tuntap: fix multiqueue rx
  ipv6: Fix PMTU updates for UDP/raw sockets in presence of VRF
  tipc: don't assume linear buffer when reading ancillary data
  tipc: fix lockdep warning when reinitilaizing sockets
  net-gro: reset skb->pkt_type in napi_reuse_skb()
  tc-testing: tdc.py: Guard against lack of returncode in executed command
  tc-testing: tdc.py: ignore errors when decoding stdout/stderr
  ip_tunnel: don't force DF when MTU is locked
  MAINTAINERS: Add entry for CAKE qdisc
  net: bridge: fix vlan stats use-after-free on destruction
  socket: do a generic_file_splice_read when proto_ops has no splice_read
  net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs
  Revert "net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs"
  net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs
  net/sched: act_pedit: fix memory leak when IDR allocation fails
  net: lantiq: Fix returned value in case of error in 'xrx200_probe()'
  ipv6: fix a dst leak when removing its exception
  net: mvneta: Don't advertise 2.5G modes
  drivers/net/ethernet/qlogic/qed/qed_rdma.h: fix typo
  net/mlx4: Fix UBSAN warning of signed integer overflow
  ...
2018-11-19 09:24:04 -08:00
Linus Torvalds 25e19c1fe4 libnvdimm 4.20-rc3
- Address Range Scrub overflow continuation handling has been broken
   since it was initially merged. It was only recently that error injection
   and platform-BIOS support enabled this corner case to be exercised.
 
 - The recent attempt to provide more isolation for the kernel Address
   Range Scrub state machine from userapace initiated sessions triggers a
   lockdep report. Revert and try again at the next merge window.
 
 - Fix a kasan reported buffer overflow in libnvdimm unit test
   infrastrucutre (nfit_test)
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJb8MdUAAoJEB7SkWpmfYgCifYP/A+OQ19HybqcY2nfvqXUdQum
 Q5x3qcKmGmEbKbnCUMOHZJpEjW4c/Cpm6OKhuFDQJ4tijn1XG3/ATSi7PXrZxs/o
 CRK8MIg5Wz/mMvYRvypIkCHHHr9+Y1NjqmQynM4LLzNG24GMXaeHHuZUTnrZCDmu
 0+jBTylNgVYdykoIxgHDYDB+cd6w4NtAP5OD9D46pdsmzX9ac+OQyZMyNB3glUhd
 /ZFAoywVNfvfJVWEci9RoHiKttWxgVoCuNbSlCs2Y6ymepA44ApR9AgLHtaC9pFO
 DrPkfCzPSmf4PVSxLJd79+/sw9YOcBD7LZ5IxzozxRMuRn5pIofdZIsBg9PlwT5B
 NL9jQK87XPiG0vNxhJu3wzP+FlyCXxGxkWfApp7w4rlWBV7RgugOZHyH051rdKzQ
 44JAPzLLCfA5Mj4o2tIbSx42f2JNX93XDEX8fkUB+qs3GzyOcMtlcmz9UjmnrT0R
 o9KHKhDn81Vivxh33Ts2G0iHktO83XSUBDWApSd6erjEUXMsCLY0D8y+nDGTOMUh
 kVcY8q93sgZGLVbcxt0eGc8Q7osZYawQGRGucflTETFcxNwMyLL4F9lWgPirGeYF
 i1JDWeTrhcImYufNj8o78LsbT5xh6YjbZZ8Q1obIgPXpDtxHNIXO6COId49Zp2cK
 obftWyVp+7kYe79NWzmD
 =sfNx
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-fixes-4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm fixes from Dan Williams:
 "A small batch of fixes for v4.20-rc3.

  The overflow continuation fix addresses something that has been broken
  for several releases. Arguably it could wait even longer, but it's a
  one line fix and this finishes the last of the known address range
  scrub bug reports. The revert addresses a lockdep regression. The unit
  tests are not critical to fix, but no reason to hold this fix back.

  Summary:

   - Address Range Scrub overflow continuation handling has been broken
     since it was initially merged. It was only recently that error
     injection and platform-BIOS support enabled this corner case to be
     exercised.

   - The recent attempt to provide more isolation for the kernel Address
     Range Scrub state machine from userapace initiated sessions
     triggers a lockdep report. Revert and try again at the next merge
     window.

   - Fix a kasan reported buffer overflow in libnvdimm unit test
     infrastrucutre (nfit_test)"

* tag 'libnvdimm-fixes-4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  Revert "acpi, nfit: Further restrict userspace ARS start requests"
  acpi, nfit: Fix ARS overflow continuation
  tools/testing/nvdimm: Fix the array size for dimm devices.
2018-11-18 12:21:09 -08:00
Brenda J. Butler c6cecf4ae4 tc-testing: tdc.py: Guard against lack of returncode in executed command
Add some defensive coding in case one of the subprocesses created by tdc
returns nothing. If no object is returned from exec_cmd, then tdc will
halt with an unhandled exception.

Signed-off-by: Brenda J. Butler <bjb@mojatatu.com>
Signed-off-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-17 21:54:53 -08:00
Lucas Bates 5aaf642852 tc-testing: tdc.py: ignore errors when decoding stdout/stderr
Prevent exceptions from being raised while decoding output
from an executed command. There is no impact on tdc's
execution and the verify command phase would fail the pattern
match.

Signed-off-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-17 21:54:53 -08:00
Paolo Abeni 9c549a6b05 selftests: add explicit test for multiple concurrent GRO sockets
This covers for proper accounting of encap needed static keys

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-16 23:03:20 -08:00
Jiri Pirko 3b423271b8 selftests: mlxsw: spectrum-2: Add simple delta test
Track the basic codepaths of delta handling, using objagg tracepoints.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15 14:43:43 -08:00
Jiri Pirko 7dc5a0eeea selftests: Adjust spectrum-2 ctcam_two_atcam_masks_test
In order for this to behave as required with delta bits, change the mask
for rule with handle 103.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15 14:43:43 -08:00
Jiri Pirko 36107c485f selftests: Adjust spectrum-2 two_mask_test
In order for this to behave as required with delta bits, change the mask
for rule with handle 103.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15 14:43:43 -08:00
Gustavo Romero b2fed34a62 selftests/powerpc: Adjust wild_bctr to build with old binutils
Currently the selftest wild_bctr can fail to build when an old gcc is
used, notably on gcc using a binutils version <= 2.27, because the
assembler does not support the integer suffix UL.

This patch adjusts the wild_bctr test so the REG_POISON value is still
treated as an unsigned long for the shifts on compilation but the UL
suffix is absent on the stringification, so the inline asm code
generated has no UL suffixes.

Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com>
[mpe: Wrap long line]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-15 23:05:17 +11:00
Michael Ellerman 2c7645b0f7 selftests/powerpc: Fix wild_bctr test to work on ppc64
The selftest I recently added to test branching to an out-of-bounds
NIP doesn't work on 64-bit big endian. It does fail but not in the
right way. That is it SEGVs trying to load from the opd at BAD_NIP,
but it never gets as far as branching to BAD_NIP.

To fix it we need to create an opd which is reachable but which holds
the bad address.

Fixes: b7683fc66e ("selftests/powerpc: Add a test of wild bctr")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-12 14:47:54 +11:00
Stefano Brivio 56fd865f46 selftests: pmtu: Introduce FoU and GUE PMTU exceptions tests
Introduce eight tests, for FoU and GUE, with IPv4 and IPv6 payload,
on IPv4 and IPv6 transport, that check that PMTU exceptions are created
with the right value when exceeding the MTU on a link of the path.

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08 17:13:08 -08:00
Stefano Brivio ce7336610c selftests: pmtu: Introduce tests for IPv4/IPv6 over GENEVE over IPv4/IPv6
Use a router between endpoints, implemented via namespaces, set a low MTU
between router and destination endpoint, exceed it and check PMTU value in
route exceptions.

v2:
- Introduce IPv4 tests right away, if iproute2 doesn't support the 'df'
  link option they will be skipped (David Ahern)

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08 17:13:08 -08:00
Stefano Brivio 582888792f selftests: pmtu: Introduce tests for IPv4/IPv6 over VXLAN over IPv4/IPv6
Use a router between endpoints, implemented via namespaces, set a low MTU
between router and destination endpoint, exceed it and check PMTU value in
route exceptions.

v2:
- Change all occurrences of VxLAN to VXLAN (Jiri Benc)
- Introduce IPv4 tests right away, if iproute2 doesn't support the 'df'
  link option they will be skipped (David Ahern)

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08 17:13:08 -08:00
Paolo Abeni 3327a9c463 selftests: add functionals test for UDP GRO
Extends the existing udp programs to allow checking for proper
GRO aggregation/GSO size, and run the tests via a shell script, using
a veth pair with XDP program attached to trigger the GRO code path.

rfc v3 -> v1:
 - use ip route to attach the xdp helper to the veth

rfc v2 -> rfc v3:
 - add missing test program options documentation
 - fix sporatic test failures (receiver faster than sender)

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07 16:23:05 -08:00
Paolo Abeni e87f53b4fa selftests: add some benchmark for UDP GRO
Run on top of veth pair, using a dummy XDP program to enable the GRO.

 rfc v3 -> v1:
  - use ip route to attach the xdp helper to the veth

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07 16:23:05 -08:00
Paolo Abeni bd8e1afe64 selftests: add dummy xdp test helper
This trivial XDP program does nothing, but will be used by the
next patch to test the GRO path in a net namespace, leveraging
the veth XDP implementation.

It's added here, despite its 'net' usage, to avoid the duplication
of the llc-related makefile boilerplate.

rfc v3 -> v1:
 - move the helper implementation into the bpf directory, don't
   touch udpgso_bench_rx

rfc v2 -> rfc v3:
 - move 'x' option handling here

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07 16:23:05 -08:00
Paolo Abeni 0a9ac2e954 selftests: add GRO support to udp bench rx program
And fix a couple of buglets (port option processing,
clean termination on SIGINT). This is preparatory work
for GRO tests.

rfc v2 -> rfc v3:
 - use ETH_MAX_MTU

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07 16:23:05 -08:00
Masayoshi Mizuma af31b04b67 tools/testing/nvdimm: Fix the array size for dimm devices.
KASAN reports following global out of bounds access while
nfit_test is being loaded. The out of bound access happens
the following reference to dimm_fail_cmd_flags[dimm]. 'dimm' is
over than the index value, NUM_DCR (==5).

  static int override_return_code(int dimm, unsigned int func, int rc)
  {
          if ((1 << func) & dimm_fail_cmd_flags[dimm]) {

dimm_fail_cmd_flags[] definition:
  static unsigned long dimm_fail_cmd_flags[NUM_DCR];

'dimm' is the return value of get_dimm(), and get_dimm() returns
the index of handle[] array. The handle[] has 7 index. Let's use
ARRAY_SIZE(handle) as the array size.

KASAN report:

==================================================================
BUG: KASAN: global-out-of-bounds in nfit_test_ctl+0x47bb/0x55b0 [nfit_test]
Read of size 8 at addr ffffffffc10cbbe8 by task kworker/u41:0/8
...
Call Trace:
 dump_stack+0xea/0x1b0
 ? dump_stack_print_info.cold.0+0x1b/0x1b
 ? kmsg_dump_rewind_nolock+0xd9/0xd9
 print_address_description+0x65/0x22e
 ? nfit_test_ctl+0x47bb/0x55b0 [nfit_test]
 kasan_report.cold.6+0x92/0x1a6
 nfit_test_ctl+0x47bb/0x55b0 [nfit_test]
...
The buggy address belongs to the variable:
 dimm_fail_cmd_flags+0x28/0xffffffffffffa440 [nfit_test]
==================================================================

Fixes: 39611e83a2 ("tools/testing/nvdimm: Make DSM failure code injection...")
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-11-05 11:34:08 -08:00
Linus Torvalds b69f9e17a5 powerpc fixes for 4.20 #2
Some things that I missed due to travel, or that came in late.
 
 Two fixes also going to stable:
 
  - A revert of a buggy change to the 8xx TLB miss handlers.
 
  - Our flushing of SPE (Signal Processing Engine) registers on fork was broken.
 
 Other changes:
 
  - A change to the KVM decrementer emulation to use proper APIs.
 
  - Some cleanups to the way we do code patching in the 8xx code.
 
  - Expose the maximum possible memory for the system in /proc/powerpc/lparcfg.
 
  - Merge some updates from Scott: "a couple device tree updates, and a fix for a
    missing prototype warning."
 
 A few other minor fixes and a handful of fixes for our selftests.
 
 Thanks to:
   Aravinda Prasad, Breno Leitao, Camelia Groza, Christophe Leroy, Felipe Rechia,
   Joel Stanley, Naveen N. Rao, Paul Mackerras, Scott Wood, Tyrel Datwyler.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJb3C+uAAoJEFHr6jzI4aWAPJgQAIX0aD/PiYfEUI/rm/Q0vnJI
 HO3FCKroi+LVF/URU24+NLA/1KGCBfO9by9m6D/nnmHl+vi2P69fFgokywO0Ajru
 nf9a+9Gx53IbO7EEUf1fZVwxCMobBqU8eWq1hIBndd5HTz9QEftc/RXgpgqZcQ/x
 x8xN1FNMSUT9NwMk750QDO7CFBrSfSjFC+/WrkViBaMiRWx2rwle+2tDipQ/fegY
 Tsu4wg0qEzWMT//MFP4yOlkcLV8M6d2Sw65Km59rWHA1I2wqsTek1yQ68Epo9Co0
 RdJh9Nt1kjLC5XXteneFhe18UUPKRmrXbYDFByw5CUhs5VI99Dq4w5kamh197XLr
 +jA3XHAeAyaXf21I9zmmZXbhHanowCPZGyzZqZXWJ86bVJp5v328wXmnxtKrb0Nz
 pH7fjQ6zjzsZgIcN9i2CFpIvuDQ/z1A/QyHdBnRvJ8HoXlTerZCn22JTgY7d2VJu
 XJn1n+VABG2BrzJexW/7quY3Z7V6tvdkloWwOA3PdAwkcoImd4BfYq9K2DU//diN
 BnXPnDs2K7JwDG9s+cgUEHnrP6DOKsxT+mmYpqXf0Ta0wtyoZJ1zgSdfZAUOmjnb
 MhcK46l+F4E891qjnsuuVNnspqI4yPMLmAGmife5OUrfcoFdm/vFbM75FaXameBx
 cMOmidrJJhO6z5eWSKvO
 =VCkW
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
 "Some things that I missed due to travel, or that came in late.

  Two fixes also going to stable:

   - A revert of a buggy change to the 8xx TLB miss handlers.

   - Our flushing of SPE (Signal Processing Engine) registers on fork
     was broken.

  Other changes:

   - A change to the KVM decrementer emulation to use proper APIs.

   - Some cleanups to the way we do code patching in the 8xx code.

   - Expose the maximum possible memory for the system in
     /proc/powerpc/lparcfg.

   - Merge some updates from Scott: "a couple device tree updates, and a
     fix for a missing prototype warning"

  A few other minor fixes and a handful of fixes for our selftests.

  Thanks to: Aravinda Prasad, Breno Leitao, Camelia Groza, Christophe
  Leroy, Felipe Rechia, Joel Stanley, Naveen N. Rao, Paul Mackerras,
  Scott Wood, Tyrel Datwyler"

* tag 'powerpc-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (21 commits)
  selftests/powerpc: Fix compilation issue due to asm label
  selftests/powerpc/cache_shape: Fix out-of-tree build
  selftests/powerpc/switch_endian: Fix out-of-tree build
  selftests/powerpc/pmu: Link ebb tests with -no-pie
  selftests/powerpc/signal: Fix out-of-tree build
  selftests/powerpc/ptrace: Fix out-of-tree build
  powerpc/xmon: Relax frame size for clang
  selftests: powerpc: Fix warning for security subdir
  selftests/powerpc: Relax L1d miss targets for rfi_flush test
  powerpc/process: Fix flush_all_to_thread for SPE
  powerpc/pseries: add missing cpumask.h include file
  selftests/powerpc: Fix ptrace tm failure
  KVM: PPC: Use exported tb_to_ns() function in decrementer emulation
  powerpc/pseries: Export maximum memory value
  powerpc/8xx: Use patch_site for perf counters setup
  powerpc/8xx: Use patch_site for memory setup patching
  powerpc/code-patching: Add a helper to get the address of a patch_site
  Revert "powerpc/8xx: Use L1 entry APG to handle _PAGE_ACCESSED for CONFIG_SWAP"
  powerpc/8xx: add missing header in 8xx_mmu.c
  powerpc/8xx: Add DT node for using the SEC engine of the MPC885
  ...
2018-11-02 09:19:35 -07:00
Linus Torvalds 82aa467151 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) BPF verifier fixes from Daniel Borkmann.

 2) HNS driver fixes from Huazhong Tan.

 3) FDB only works for ethernet devices, reject attempts to install FDB
    rules for others. From Ido Schimmel.

 4) Fix spectre V1 in vhost, from Jason Wang.

 5) Don't pass on-stack object to irq_set_affinity_hint() in mvpp2
    driver, from Marc Zyngier.

 6) Fix mlx5e checksum handling when RXFCS is enabled, from Eric
    Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (49 commits)
  openvswitch: Fix push/pop ethernet validation
  net: stmmac: Fix stmmac_mdio_reset() when building stmmac as modules
  bpf: test make sure to run unpriv test cases in test_verifier
  bpf: add various test cases to test_verifier
  bpf: don't set id on after map lookup with ptr_to_map_val return
  bpf: fix partial copy of map_ptr when dst is scalar
  libbpf: Fix compile error in libbpf_attach_type_by_name
  kselftests/bpf: use ping6 as the default ipv6 ping binary if it exists
  selftests: mlxsw: qos_mc_aware: Add a test for UC awareness
  selftests: mlxsw: qos_mc_aware: Tweak for min shaper
  mlxsw: spectrum: Set minimum shaper on MC TCs
  mlxsw: reg: QEEC: Add minimum shaper fields
  net: hns3: bugfix for rtnl_lock's range in the hclgevf_reset()
  net: hns3: bugfix for rtnl_lock's range in the hclge_reset()
  net: hns3: bugfix for handling mailbox while the command queue reinitialized
  net: hns3: fix incorrect return value/type of some functions
  net: hns3: bugfix for hclge_mdio_write and hclge_mdio_read
  net: hns3: bugfix for is_valid_csq_clean_head()
  net: hns3: remove unnecessary queue reset in the hns3_uninit_all_ring()
  net: hns3: bugfix for the initialization of command queue's spin lock
  ...
2018-11-01 09:16:01 -07:00
David S. Miller df975da4e5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2018-11-01

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix tcp_bpf_recvmsg() to return -EAGAIN instead of 0 in non-blocking
   case when no data is available yet, from John.

2) Fix a compilation error in libbpf_attach_type_by_name() when compiled
   with clang 3.8, from Andrey.

3) Fix a partial copy of map pointer on scalar alu and remove id
   generation for RET_PTR_TO_MAP_VALUE return types, from Daniel.

4) Add unlimited memlock limit for kernel selftest's flow_dissector_load
   program, from Yonghong.

5) Fix ping for some BPF shell based kselftests where distro does not
   ship "ping -6" anymore, from Li.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 17:34:08 -07:00
Daniel Borkmann 832c6f2c29 bpf: test make sure to run unpriv test cases in test_verifier
Right now unprivileged tests are never executed as a BPF test run,
only loaded. Allow for running them as well so that we can check
the outcome and probe for regressions.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-31 16:53:17 -07:00
Daniel Borkmann 2683f4128c bpf: add various test cases to test_verifier
Add some more map related test cases to test_verifier kselftest
to improve test coverage. Summary: 1012 PASSED, 0 SKIPPED, 0 FAILED

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-31 16:53:17 -07:00
Naveen N. Rao 1936f094e1 selftests/powerpc: Fix compilation issue due to asm label
We are using 'dscr_insn' as a label in inline asm to identify if a
SIGILL was generated by the mtspr instruction at that point. However,
with inline assembly, the compiler is still free to duplicate the asm
statement for optimization purposes, which results in the label being
defined twice with the error:
	/tmp/ccerQCql.s:874: Error: symbol `dscr_insn' is already defined

With different compiler versions, we may also see:
	/tmp/ccJzLDlN.o:(.toc+0x0): undefined reference to `dscr_insn'

Remove the use of the label in the inline assembly. Instead, just look
for the offending instruction in the signal handler.

Fixes: d2bf793237 ("selftests/powerpc: Add test to verify rfi flush across a system call")
Reported-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Tested-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-01 10:06:03 +11:00
Li Zhijian deee2cae27 kselftests/bpf: use ping6 as the default ipv6 ping binary if it exists
ping binary on some distros doesn't support "ping -6" anymore.

Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-31 23:05:30 +01:00
Petr Machata a5ee171d08 selftests: mlxsw: qos_mc_aware: Add a test for UC awareness
In a previous patch, mlxsw was updated to configure a minimum bandwidth
allowance on MC TCs. Test that this indeed fixes the problem of UC
traffic overload pushing out all MC traffic.

Fixes: b5638d46c9 ("selftests: mlxsw: Add a test for UC behavior under MC flood")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:56:59 -07:00
Petr Machata 8f3f09358c selftests: mlxsw: qos_mc_aware: Tweak for min shaper
Since the minimum shaper is now being enabled for MC TCs, it's
unreasonable to expect no UC traffic loss. Minimal min shaper value is
200Mbps, which is 20% of the 1Gbps that this test configures on egress.
To cover for glitches, tolerate up to 25% UC degradation under MC
overload.

Fixes: b5638d46c9 ("selftests: mlxsw: Add a test for UC behavior under MC flood")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:56:59 -07:00
Michael Ellerman 69f8117f17 selftests/powerpc/cache_shape: Fix out-of-tree build
Use TEST_GEN_PROGS and don't redefine all, this makes the out-of-tree
build work. We need to move the extra dependencies below the include
of lib.mk, because it adds the $(OUTPUT) prefix if it's defined.

We can also drop the clean rule, lib.mk does it for us.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-31 23:56:22 +11:00
Michael Ellerman 266bac361d selftests/powerpc/switch_endian: Fix out-of-tree build
For the out-of-tree build to work we need to tell switch_endian_test
to look for check-reversed.S in $(OUTPUT).

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-31 23:56:21 +11:00
Joel Stanley 98415da03a selftests/powerpc/pmu: Link ebb tests with -no-pie
When running the ebb tests after building on a ppc64le Ubuntu machine:

 $ pmu/ebb/reg_access_test: error while loading shared libraries:
 R_PPC64_ADDR16_HI reloc at 0x000000013a965130 for symbol `' out of
 range

This is because the Ubuntu toolchain builds has PIE enabled by default.
Change it to be always off instead.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-31 23:56:21 +11:00
Joel Stanley 27825349d7 selftests/powerpc/signal: Fix out-of-tree build
We should use TEST_GEN_PROGS, not TEST_PROGS. That tells the selftests
makefile (lib.mk) that those tests are generated (built), and so it
adds the $(OUTPUT) prefix for us, making the out-of-tree build work
correctly.

It also means we don't need our own clean rule, lib.mk does it.

We also have to update the signal_tm rule to use $(OUTPUT).

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-31 23:56:20 +11:00
Joel Stanley c39b79082a selftests/powerpc/ptrace: Fix out-of-tree build
We should use TEST_GEN_PROGS, not TEST_PROGS. That tells the selftests
makefile (lib.mk) that those tests are generated (built), and so it
adds the $(OUTPUT) prefix for us, making the out-of-tree build work
correctly.

It also means we don't need our own clean rule, lib.mk does it.

We also have to update the ptrace-pkey and core-pkey rules to use
$(OUTPUT).

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-31 23:56:19 +11:00