Since the introduction of ULD (Upper-Layer Drivers), the MSI-X
deallocating path changed in cxgb4: the driver frees the interrupts
of ULD when unregistering it or on shutdown PCI handler.
Problem is that if a MSI-X is not freed before deallocated in the PCI
layer, it will trigger a BUG() due to still "alive" interrupt being
tentatively quiesced.
The below trace was observed when doing a simple unbind of Chelsio's
adapter PCI function, like:
"echo 001e:80:00.4 > /sys/bus/pci/drivers/cxgb4/unbind"
Trace:
kernel BUG at drivers/pci/msi.c:352!
Oops: Exception in kernel mode, sig: 5 [#1]
...
NIP [c0000000005a5e60] free_msi_irqs+0xa0/0x250
LR [c0000000005a5e50] free_msi_irqs+0x90/0x250
Call Trace:
[c0000000005a5e50] free_msi_irqs+0x90/0x250 (unreliable)
[c0000000005a72c4] pci_disable_msix+0x124/0x180
[d000000011e06708] disable_msi+0x88/0xb0 [cxgb4]
[d000000011e06948] free_some_resources+0xa8/0x160 [cxgb4]
[d000000011e06d60] remove_one+0x170/0x3c0 [cxgb4]
[c00000000058a910] pci_device_remove+0x70/0x110
[c00000000064ef04] device_release_driver_internal+0x1f4/0x2c0
...
This patch fixes the issue by refactoring the shutdown path of ULD on
cxgb4 driver, by properly freeing and disabling interrupts on PCI
remove handler too.
Fixes: 0fbc81b3ad ("Allocate resources dynamically for all cxgb4 ULD's")
Reported-by: Harsha Thyagaraja <hathyaga@in.ibm.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The option "h" (host order ) exists for ipv4 only.
Remove the h when printing ipv6 addresses.
Lead to the following smatch warning:
drivers/net/ethernet/qlogic/qed/qed_iwarp.c:585 qed_iwarp_print_tcp_ramrod()
warn: '%pI6' can only be followed by c
drivers/net/ethernet/qlogic/qed/qed_iwarp.c:1521 qed_iwarp_print_cm_info()
warn: '%pI6' can only be followed by c
Fixes commit 456a584947 ("qed: iWARP CM add passive side connect")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Passing (void*)val instead of &val would make a pointer out of an integer
and cause sock_setsockopt to -EFAULT.
See tools/testing/selftests/networking/timestamping/timestamping.c
for a working example.
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christophe JAILLET says:
====================
net: stmmac: Fixes and cleanups in 'alloc_dma_[rt]x_desc_resources()'
These patchs are all related to 'alloc_dma_[rt]x_desc_resources()' functions.
The 2 first fix an error path where some resources are leaking. I've
separated them into 2 patches because the issues have been introduced by
2 deferent commits.
The 3rd patch is just a clean-up.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
'alloc_dma_[rt]x_desc_resources()' functions look very close.
Remove a useless initialization and use the same label name for error
handling path in order to get them even closer.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the first 'kmalloc_array' within the loop fails, we should free what
as already been allocated, as done in all other error handling path.
Fixes: ce736788e8 ("net: stmmac: adding multiple buffers for TX")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the first 'kmalloc_array' within the loop fails, we should free what
as already been allocated, as done in all other error handling path.
Fixes: 54139cf3bb ("net: stmmac: adding multiple buffers for rx")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
if 'ioread32()' returns 0xFFFFFFF, we have to go through the error
handling path as done everywhere else in this function.
Move the 'err_free_wq' label to better match its name and its location
and add a new label 'err_disable_wq'.
Update the code accordingly.
Fixes: 373fb0873d ("enic: add devcmd2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan says:
====================
bnxt_en: Bug fixes.
3 bug fixes in this series. Fix a crash in bnxt_get_stats64() that can
happen if the device is closing and freeing the statistics block at the
same time. The 2nd one fixes ethtool -L failing when changing from
combined to non-combined mode or vice versa. The last one fixes SRIOV
failure on big-endian systems because we were setting a bitmap wrong in
a firmware message.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The PF driver sets up a list of firmware commands from the VF driver that
needs to be forwarded to the PF for approval. This list is a 256-bit
bitmap. The code that sets up the bitmap falls apart on big-endian
architecture. __set_bit() does not work because it operates on long types
whereas the firmware interface is defined in u32 types, causing bits in
the wrong 32-bit word to be set.
Fix it by setting the proper bits on an array of u32.
Fixes: de68f5de56 ("bnxt_en: Fix bitmap declaration to work on 32-bit arches.")
Reported-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When changing channels from combined to rx/tx or vice versa, the code
uses the wrong "sh" parameter to determine if we are reserving rings
for shared or non-shared mode. It should be using the ethtool requested
"sh" parameter instead of the current "sh" parameter.
Fix it by passing the "sh" parameter to bnxt_reserve_rings(). For
ethtool, we will pass in the requested "sh" parameter.
Fixes: 391be5c273 ("bnxt_en: Implement new scheme to reserve tx rings.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
.ndo_get_stats64() may not be protected by RTNL and can race with
.ndo_stop() or other ethtool operations that can free the statistics
memory. Fix it by setting a new flag BNXT_STATE_READ_STATS and then
proceeding to read statistics memory only if the state is OPEN. The
close path that frees the memory clears the OPEN state and then waits
for the BNXT_STATE_READ_STATS to clear before proceeding to free the
statistics memory.
Fixes: c0c050c58d ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The new IPSec offload code introduced a build error:
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_rxtx.o: In function `mlx5e_ipsec_build_inverse_table':
ipsec_rxtx.c:(.text+0x556): undefined reference
Another patch was added on top to fix the build error, but
that introduced a new bug, as we now use the remainder of
the division rather than the result.
This makes it use the correct helper function instead.
Fixes: 5dfd87b67c ("net/mlx5: IPSec, Fix 64-bit division on 32-bit builds")
Fixes: 2ac9cfe782 ("net/mlx5e: IPSec, Add Innova IPSec offload TX data path")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This series includes fixes to mlx5 driver:
- Compilation warnings and issues introduced on v4.12
- Initialize CEE's getpermhwaddr address buffer to 0xff
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZYiE3AAoJEEg/ir3gV/o+/GYH/1qly/TNGUbmLyxFmx5dHBlI
1V98Rxrrk/Y2eA+PtcgHzJKcZ/vcAYhwAY/3JIY3qfiWyD/GAfK3hPcemMpNNyCj
va9C9SUEcGr6JEZ0UgGQDcmU3aWs1yslMe7+ZiW9k1EcG0HvEmaB2BPLRmVKxUWX
6gF0qdIGuj0wu7PL/ly5CZQ5jl8r6oKp665YJxvaJlVCaZYyZZgzuXK/MHuCZRbK
ziIONkmtGzfBb/Yocxgr2lSR+1PIFpDtRysBbhYJDlsMCPo3XMT+M+xJI92kH6ZP
pj8NxDvUTCHtyrmAk5aUxRzta71uqY6XgjR+PBwecG47jJ/+0kryxj1MU008diA=
=ebzr
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2017-07-09' of https://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-fixes-2017-07-09
This series includes fixes to mlx5 driver:
- Compilation warnings and issues introduced on v4.12
- Initialize CEE's getpermhwaddr address buffer to 0xff
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull MD update from Shaohua Li:
- fixed deadlock in MD suspend and a potential bug in bio allocation
(Neil Brown)
- fixed signal issue (Mikulas Patocka)
- fixed typo in FailFast test (Guoqing Jiang)
- other trival fixes
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
MD: fix sleep in atomic
MD: fix a null dereference
md: use a separate bio_set for synchronous IO.
md: change the initialization value for a spare device spot to MD_DISK_ROLE_SPARE
md/raid1: remove unused bio in sync_request_write
md/raid10: fix FailFast test for wrong device
md: don't use flush_signals in userspace processes
md: fix deadlock between mddev_suspend() and md_write_start()
Pull input updates from Dmitry Torokhov:
- a new driver for STM FingerTip touchscreen
- a new driver for D-Link DIR-685 touch keys
- updated list of supported devices in xpad driver
- other assorted updates and fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (23 commits)
MAINTAINERS: update input subsystem patterns
Input: introduce KEY_ASSISTANT
Input: xpad - sync supported devices with XBCD
Input: xpad - sync supported devices with 360Controller
Input: xen-kbdfront - use string constants from PV protocol
Input: stmfts - mark all PM functions as __maybe_unused
Input: add support for the STMicroelectronics FingerTip touchscreen
Input: add D-Link DIR-685 touchkeys driver
Input: s3c2410_ts - handle return value of clk_prepare_enable
Input: axp20x-pek - add wakeup support
Input: synaptics-rmi4 - use %phN to form F34 configuration ID
Input: synaptics-rmi4 - change a char type to u8
Input: sparse-keymap - remove sparse_keymap_free()
Input: tsc2007 - move header file out of I2C realm
Input: mms114 - move header file out of I2C realm
Input: mcs - move header file out of I2C realm
Input: lm8323 - move header file out of I2C realm
Input: elantech - force relative mode on a certain module
Input: elan_i2c - add support for fetching chip type on newer hardware
Input: elan_i2c - check if device is there before really probing
...
- removal of AVR32 support in dw driver as AVR32 is gone
- new driver for Broadcom stream buffer accelerator (SBA) RAID driver
- add support for Faraday Technology FTDMAC020 in amba-pl08x driver
- IOMMU support in pl330 driver
- updates to bunch of drivers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=srPZ
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-4.13-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
- removal of AVR32 support in dw driver as AVR32 is gone
- new driver for Broadcom stream buffer accelerator (SBA) RAID driver
- add support for Faraday Technology FTDMAC020 in amba-pl08x driver
- IOMMU support in pl330 driver
- updates to bunch of drivers
* tag 'dmaengine-4.13-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (36 commits)
dmaengine: qcom_hidma: correct API violation for submit
dmaengine: zynqmp_dma: Remove max len check in zynqmp_dma_prep_memcpy
dmaengine: tegra-apb: Really fix runtime-pm usage
dmaengine: fsl_raid: make of_device_ids const.
dmaengine: qcom_hidma: allow ACPI/DT parameters to be overridden
dmaengine: fsldma: set BWC, DAHTS and SAHTS values correctly
dmaengine: Kconfig: Simplify the help text for MXS_DMA
dmaengine: pl330: Delete unused functions
dmaengine: Replace WARN_TAINT_ONCE() with pr_warn_once()
dmaengine: Kconfig: Extend the dependency for MXS_DMA
dmaengine: mxs: Use %zu for printing a size_t variable
dmaengine: ste_dma40: Cleanup scatterlist layering violations
dmaengine: imx-dma: cleanup scatterlist layering violations
dmaengine: use proper name for the R-Car SoC
dmaengine: imx-sdma: Fix compilation warning.
dmaengine: imx-sdma: Handle return value of clk_prepare_enable
dmaengine: pl330: Add IOMMU support to slave tranfers
dmaengine: DW DMAC: Handle return value of clk_prepare_enable
dmaengine: pl08x: use GENMASK() to create bitmasks
dmaengine: pl08x: Add support for Faraday Technology FTDMAC020
...
Pull ARM updates from Russell King:
- add support for ftrace-with-registers, which is needed for kgraft and
other ftrace tools
- support for mremap() for the sigpage/vDSO so that checkpoint/restore
can work
- add timestamps to each line of the register dump output
- remove the unused KTHREAD_SIZE from nommu
- align the ARM bitops APIs with the generic API (using unsigned long
pointers rather than void pointers)
- make the configuration of userspace Thumb support an expert option so
that we can default it on, and avoid some hard to debug userspace
crashes
* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8684/1: NOMMU: Remove unused KTHREAD_SIZE definition
ARM: 8683/1: ARM32: Support mremap() for sigpage/vDSO
ARM: 8679/1: bitops: Align prototypes to generic API
ARM: 8678/1: ftrace: Adds support for CONFIG_DYNAMIC_FTRACE_WITH_REGS
ARM: make configuration of userspace Thumb support an expert option
ARM: 8673/1: Fix __show_regs output timestamps
Pull sparc updates from David Miller:
1) Queued spinlocks and rwlocks for sparc64, from Babu Moger.
2) Some const'ification from Arvind Yadav.
3) LDC/VIO driver infrastructure changes to facilitate future upcoming
drivers, from Jag Raman.
4) Initialize sched_clock() et al. early so that the initial printk
timestamps are all done while the implementation is available and
functioning. From Pavel Tatashin.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next: (38 commits)
sparc: kernel: pmc: make of_device_ids const.
sparc64: fix typo in property
sparc64: add port_id to VIO device metadata
sparc64: Enhance search for VIO device in MDESC
sparc64: enhance VIO device probing
sparc64: check if a client is allowed to register for MDESC notifications
sparc64: remove restriction on VIO device name size
sparc64: refactor code to obtain cfg_handle property from MDESC
sparc64: add MDESC node name property to VIO device metadata
sparc64: mdesc: use __GFP_REPEAT action modifier for VM allocation
sparc64: expand MDESC interface
sparc64: skip handshake for LDC channels in RAW mode
sparc64: specify the device class in VIO version info. packet
sparc64: ensure VIO operations are defined while being used
sparc: kernel: apc: make of_device_ids const
sparc/time: make of_device_ids const
sparc64: broken %tick frequency on spitfire cpus
sparc64: use prom interface to get %stick frequency
sparc64: optimize functions that access tick
sparc64: add hot-patched and inlined get_tick()
...
Pull networking fixes from David Miller:
"Mostly fixing some light fallout from the changes that went into the
merge window.
1) Fix memory leaks on network namespace teardown in netfilter, from
Liping Zhang.
2) When comparing ipv6 nexthops, we have to take the lightweight
tunnel state into account as well. From David Ahern.
3) Fix socket option object length check in the new TLS code, from
Matthias Rosenfelder.
4) Fix memory leak in nfp driver flower support, from Jakub Kicinski.
5) Several netlink attribute validation fixes in cfg80211, from
Srinivas Dasari.
6) Fix context array leak in virtio_net, from Jason Wang.
7) SKB use after free in hns driver, from Yusheng Lin.
8) Fix socket leak on accept() in RDS, from Sowmini Varadhan. Also
add a WARN_ON() to sock_graft() so other protocol stacks don't
trip over this as well"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits)
net: ethernet: mediatek: remove useless code in mtk_probe()
mpls: fix uninitialized in_label var warning in mpls_getroute
doc: SKB_GSO_[IPIP|SIT] have been replaced
bonding: avoid NETDEV_CHANGEMTU event when unregistering slave
net/sock: add WARN_ON(parent->sk) in sock_graft()
rds: tcp: use sock_create_lite() to create the accept socket
net: hns: Fix a skb used after free bug
net: hns: Fix a wrong op phy C45 code
net: macb: Adding Support for Jumbo Frames up to 10240 Bytes in SAMA5D3
net: Update networking MAINTAINERS entry.
virtio-net: fix leaking of ctx array
cfg80211: Validate frequencies nested in NL80211_ATTR_SCAN_FREQUENCIES
cfg80211: Define nla_policy for NL80211_ATTR_LOCAL_MESH_POWER_MODE
cfg80211: Check if NAN service ID is of expected size
cfg80211: Check if PMKID attribute is of expected size
arcnet: com20020-pci: Fix an error handling path in 'com20020pci_probe()'
nfp: flower: add missing clean up call to avoid memory leaks
vrf: fix bug_on triggered by rx when destroying a vrf
ptp: dte: Use LL suffix for 64-bit constants
sctp: set the value of flowi6_oif to sk_bound_dev_if to make sctp_v6_get_dst to find the correct route entry.
...
Pull misc filesystem updates from Al Viro:
"Assorted normal VFS / filesystems stuff..."
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
dentry name snapshots
Make statfs properly return read-only state after emergency remount
fs/dcache: init in_lookup_hashtable
minix: Deinline get_block, save 2691 bytes
fs: Reorder inode_owner_or_capable() to avoid needless
fs: warn in case userspace lied about modprobe return
Pull spi uaccess delousing from Al Viro:
"Getting rid of pointless __get_user() and friends in drivers/spi.
[ the only reason it's on a separate branch is that I hoped it would
be picked by spi folks; looks like mail asking them to grab it got
lost and I hadn't followed up on that ]"
* 'for-spi' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
spidev: quit messing with access_ok()
Pull __copy_in_user removal from Al Viro:
"There used to be 6 places in the entire tree calling __copy_in_user(),
all of them bogus.
Four got killed off in work.drm branch, this takes care of the
remaining ones and kills the definition of that sucker"
* 'work.__copy_in_user' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
kill __copy_in_user()
sanitize do_i2c_smbus_ioctl()
Remove useless local variables _match_, _soc_ and the code related.
Notice that
const struct of_device_id of_mtk_match[] = {
{ .compatible = "mediatek,mt2701-eth" },
{},
};
So match->data is NULL.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the below warning generated by static checker:
net/mpls/af_mpls.c:2111 mpls_getroute()
error: uninitialized symbol 'in_label'."
Fixes: 397fc9e5ce ("mpls: route get support")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Those enum values don't exist anymore.
Fixes: 7e13318daa ("net: define gso types for IPx over IPv4 and IPv6")
CC: Tom Herbert <tom@herbertland.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As Hongjun/Nicolas summarized in their original patch:
"
When a device changes from one netns to another, it's first unregistered,
then the netns reference is updated and the dev is registered in the new
netns. Thus, when a slave moves to another netns, it is first
unregistered. This triggers a NETDEV_UNREGISTER event which is caught by
the bonding driver. The driver calls bond_release(), which calls
dev_set_mtu() and thus triggers NETDEV_CHANGEMTU (the device is still in
the old netns).
"
This is a very special case, because the device is being unregistered
no one should still care about the NETDEV_CHANGEMTU event triggered
at this point, we can avoid broadcasting this event on this path,
and avoid touching inetdev_event()/addrconf_notify() path.
It requires to export __dev_set_mtu() to bonding driver.
Reported-by: Hongjun Li <hongjun.li@6wind.com>
Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sowmini Varadhan says:
====================
rds-tcp: sock_graft() leak
Following up on the discussion at
https://www.spinics.net/lists/netdev/msg442859.html
- make rds_tcp_accept_one() call sock_create_lite()
- add a WARN_ON() to sock_graft()
Tested by running an infinite while() loop that does
(module-load; rds-stress; module-unload) and monitors
TCP slabinfo while the test is running.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
sock_graft() unilaterally sets up parent->sk based on the
assumption that the existing parent->sk is null. If this
condition is not true, then the existing parent->sk would
be leaked, so add a WARN_ON() to alert callers who may fall
in this category.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two problems with calling sock_create_kern() from
rds_tcp_accept_one()
1. it sets up a new_sock->sk that is wasteful, because this ->sk
is going to get replaced by inet_accept() in the subsequent ->accept()
2. The new_sock->sk is a leaked reference in sock_graft() which
expects to find a null parent->sk
Avoid these problems by calling sock_create_lite().
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lin Yun Sheng says:
====================
Bugfixs for hns ethernet driver
This patchset fix skb used after free and C45 op code issues
in hns driver.
Patch V2:
1. Remove ndev->feature checking in TX description patch.
2. Add Fixes: Tag in patch description.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
As the user manual described, the second step to write to C45 phy
by mdio should be data, but not address. Here we should fix this
issue.
Fixes: 5b904d3940 ("net: add Hisilicon Network Subsystem MDIO support")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: lipeng <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As per the SAMA5D3 device specification it supports Jumbo frames.
But the suggested flag and length of bytes it supports was not updated
in this driver config_structure.
The maximum jumbo frames the device supports :
10240 bytes as per the device spec.
While changing the MTU value greater than 1500, it threw error:
sudo ifconfig eth1 mtu 9000
SIOCSIFMTU: Invalid argument
Add this support to driver so that it works as expected and designed.
Signed-off-by: vishnuvardhan <vardhanraj4143@gmail.com>
[nicolas.ferre@microchip.com: modify slightly commit msg]
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull read/write fix from Al Viro:
"file_start_write()/file_end_write() got mixed into vfs_iter_write() by
accident; that's a deadlock for all existing callers - they already do
that, some - quite a bit outside.
Easily fixed, fortunately"
* 'work.read_write' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
move file_{start,end}_write() out of do_iter_write()
Pull iov_iter hardening from Al Viro:
"This is the iov_iter/uaccess/hardening pile.
For one thing, it trims the inline part of copy_to_user/copy_from_user
to the minimum that *does* need to be inlined - object size checks,
basically. For another, it sanitizes the checks for iov_iter
primitives. There are 4 groups of checks: access_ok(), might_fault(),
object size and KASAN.
- access_ok() had been verified by whoever had set the iov_iter up.
However, that has happened in a function far away, so proving that
there's no path to actual copying bypassing those checks is hard
and proving that iov_iter has not been buggered in the meanwhile is
also not pleasant. So we want those redone in actual
copyin/copyout.
- might_fault() is better off consolidated - we know whether it needs
to be checked as soon as we enter iov_iter primitive and observe
the iov_iter flavour. No need to wait until the copyin/copyout. The
call chains are short enough to make sure we won't miss anything -
in fact, it's more robust that way, since there are cases where we
do e.g. forced fault-in before getting to copyin/copyout. It's not
quite what we need to check (in particular, combination of
iovec-backed and set_fs(KERNEL_DS) is almost certainly a bug, not a
cause to skip checks), but that's for later series. For now let's
keep might_fault().
- KASAN checks belong in copyin/copyout - at the same level where
other iov_iter flavours would've hit them in memcpy().
- object size checks should apply to *all* iov_iter flavours, not
just iovec-backed ones.
There are two groups of primitives - one gets the kernel object
described as pointer + size (copy_to_iter(), etc.) while another gets
it as page + offset + size (copy_page_to_iter(), etc.)
For the first group the checks are best done where we actually have a
chance to find the object size. In other words, those belong in inline
wrappers in uio.h, before calling into iov_iter.c. Same kind as we
have for inlined part of copy_to_user().
For the second group there is no object to look at - offset in page is
just a number, it bears no type information. So we do them in the
common helper called by iov_iter.c primitives of that kind. All it
currently does is checking that we are not trying to access outside of
the compound page; eventually we might want to add some sanity checks
on the page involved.
So the things we need in copyin/copyout part of iov_iter.c do not
quite match anything in uaccess.h (we want no zeroing, we *do* want
access_ok() and KASAN and we want no might_fault() or object size
checks done on that level). OTOH, these needs are simple enough to
provide a couple of helpers (static in iov_iter.c) doing just what we
need..."
* 'uaccess-work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
iov_iter: saner checks on copyin/copyout
iov_iter: sanity checks for copy to/from page primitives
iov_iter/hardening: move object size checks to inlined part
copy_{to,from}_user(): consolidate object size checks
copy_{from,to}_user(): move kasan checks and might_fault() out-of-line
To avoid pathological stack usage or the need to special-case setuid
execs, just limit all arg stack usage to at most 75% of _STK_LIM (6MB).
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=3Z93
-----END PGP SIGNATURE-----
Merge tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull Writeback error handling updates from Jeff Layton:
"This pile represents the bulk of the writeback error handling fixes
that I have for this cycle. Some of the earlier patches in this pile
may look trivial but they are prerequisites for later patches in the
series.
The aim of this set is to improve how we track and report writeback
errors to userland. Most applications that care about data integrity
will periodically call fsync/fdatasync/msync to ensure that their
writes have made it to the backing store.
For a very long time, we have tracked writeback errors using two flags
in the address_space: AS_EIO and AS_ENOSPC. Those flags are set when a
writeback error occurs (via mapping_set_error) and are cleared as a
side-effect of filemap_check_errors (as you noted yesterday). This
model really sucks for userland.
Only the first task to call fsync (or msync or fdatasync) will see the
error. Any subsequent task calling fsync on a file will get back 0
(unless another writeback error occurs in the interim). If I have
several tasks writing to a file and calling fsync to ensure that their
writes got stored, then I need to have them coordinate with one
another. That's difficult enough, but in a world of containerized
setups that coordination may even not be possible.
But wait...it gets worse!
The calls to filemap_check_errors can be buried pretty far down in the
call stack, and there are internal callers of filemap_write_and_wait
and the like that also end up clearing those errors. Many of those
callers ignore the error return from that function or return it to
userland at nonsensical times (e.g. truncate() or stat()). If I get
back -EIO on a truncate, there is no reason to think that it was
because some previous writeback failed, and a subsequent fsync() will
(incorrectly) return 0.
This pile aims to do three things:
1) ensure that when a writeback error occurs that that error will be
reported to userland on a subsequent fsync/fdatasync/msync call,
regardless of what internal callers are doing
2) report writeback errors on all file descriptions that were open at
the time that the error occurred. This is a user-visible change,
but I think most applications are written to assume this behavior
anyway. Those that aren't are unlikely to be hurt by it.
3) document what filesystems should do when there is a writeback
error. Today, there is very little consistency between them, and a
lot of cargo-cult copying. We need to make it very clear what
filesystems should do in this situation.
To achieve this, the set adds a new data type (errseq_t) and then
builds new writeback error tracking infrastructure around that. Once
all of that is in place, we change the filesystems to use the new
infrastructure for reporting wb errors to userland.
Note that this is just the initial foray into cleaning up this mess.
There is a lot of work remaining here:
1) convert the rest of the filesystems in a similar fashion. Once the
initial set is in, then I think most other fs' will be fairly
simple to convert. Hopefully most of those can in via individual
filesystem trees.
2) convert internal waiters on writeback to use errseq_t for
detecting errors instead of relying on the AS_* flags. I have some
draft patches for this for ext4, but they are not quite ready for
prime time yet.
This was a discussion topic this year at LSF/MM too. If you're
interested in the gory details, LWN has some good articles about this:
https://lwn.net/Articles/718734/https://lwn.net/Articles/724307/"
* tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
btrfs: minimal conversion to errseq_t writeback error reporting on fsync
xfs: minimal conversion to errseq_t writeback error reporting
ext4: use errseq_t based error handling for reporting data writeback errors
fs: convert __generic_file_fsync to use errseq_t based reporting
block: convert to errseq_t based writeback error tracking
dax: set errors in mapping when writeback fails
Documentation: flesh out the section in vfs.txt on storing and reporting writeback errors
mm: set both AS_EIO/AS_ENOSPC and errseq_t in mapping_set_error
fs: new infrastructure for writeback error handling and reporting
lib: add errseq_t type and infrastructure for handling it
mm: don't TestClearPageError in __filemap_fdatawait_range
mm: clear AS_EIO/AS_ENOSPC when writeback initiation fails
jbd2: don't clear and reset errors after waiting on writeback
buffer: set errors in mapping at the time that the error occurs
fs: check for writeback errors after syncing out buffers in generic_file_fsync
buffer: use mapping_set_error instead of setting the flag
mm: fix mapping_set_error call in me_pagecache_dirty
-----BEGIN PGP SIGNATURE-----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=jRrj
-----END PGP SIGNATURE-----
Merge tag 'for-linus-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull Writeback error handling fixes from Jeff Layton:
"The main rationale for all of these changes is to tighten up writeback
error reporting to userland. There are many ways now that writeback
errors can be lost, such that fsync/fdatasync/msync return 0 when
writeback actually failed.
This pile contains a small set of cleanups and writeback error
handling fixes that I was able to break off from the main pile (#2).
Two of the patches in this pile are trivial. The exceptions are the
patch to fix up error handling in write_one_page, and the patch to
make JFS pay attention to write_one_page errors"
* tag 'for-linus-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
fs: remove call_fsync helper function
mm: clean up error handling in write_one_page
JFS: do not ignore return code from write_one_page()
mm: drop "wait" parameter from write_one_page()
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=XSvA
-----END PGP SIGNATURE-----
Merge tag 'cifs-bug-fixes-for-4.13' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"First set of CIFS/SMB3 fixes for the merge window. Also improves POSIX
character mapping for SMB3"
* tag 'cifs-bug-fixes-for-4.13' of git://git.samba.org/sfrench/cifs-2.6:
CIFS: fix circular locking dependency
cifs: set oparms.create_options rather than or'ing in CREATE_OPEN_BACKUP_INTENT
cifs: Do not modify mid entry after submitting I/O in cifs_call_async
CIFS: add SFM mapping for 0x01-0x1F
cifs: hide unused functions
cifs: Use smb 2 - 3 and cifsacl mount options getacl functions
cifs: prototype declaration and definition for smb 2 - 3 and cifsacl mount options
CIFS: add CONFIG_CIFS_DEBUG_KEYS to dump encryption keys
cifs: set mapping error when page writeback fails in writepage or launder_pages
SMB3: Enable encryption for SMB3.1.1
introduced by commit 88ffbf3e03. Some code was reverted that
should not have been. This patch from Andreas Gruenbacher adds
it back in.
gfs2: Fix glock rhashtable rcu bug
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZX9rXAAoJENeLYdPf93o7aoIIAIAGxnkPj+uHoaHkOKWWJ28g
mjaRhPdMxFEdK7U06jJdqI5+nPZjZ9/W4J894ERBkAa685LjOGagkd4oIBHBJ99M
kD1xIrkNIZC5ThuGbBjnYVq57EoFpsgLgvsLwZ+nYRYCFcphT+IO8hj/fLylayWq
4LSNGMD8TrbTInVhtEGgFV1M8XI6RY2rQJm0wsYcdcAU+VEVtz25RGR0DMnmnh3m
t4G1tmUByWfXEr4DCuEqYp9qbJb4sPG/JSoQQCiU/KrWYsm/6nJhXN2rlKNieimL
/qasyP4LmFEAm5QuTdB0DNSkNTO7ZXm3C1dFwA5i+iNwY7efAeOVIRMSd1Yy4dE=
=vcj3
-----END PGP SIGNATURE-----
Merge tag 'gfs2-4.13.fixes.addendum' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull GFS2 fix from Bob Peterson:
"Sorry for the additional merge request, but Andreas discovered this
problem soon after you processed our last gfs2 merge.
This fixes a regression introduced by a patch we did in mid-2015
(commit 88ffbf3e037e: "GFS2: Use resizable hash table for glocks"), so
best to get it fixed. Some code was reverted that should not have
been.
The patch from Andreas Gruenbacher just re-adds code that had been
there originally"
* tag 'gfs2-4.13.fixes.addendum' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix glock rhashtable rcu bug
take_dentry_name_snapshot() takes a safe snapshot of dentry name;
if the name is a short one, it gets copied into caller-supplied
structure, otherwise an extra reference to external name is grabbed
(those are never modified). In either case the pointer to stable
string is stored into the same structure.
dentry must be held by the caller of take_dentry_name_snapshot(),
but may be freely dropped afterwards - the snapshot will stay
until destroyed by release_dentry_name_snapshot().
Intended use:
struct name_snapshot s;
take_dentry_name_snapshot(&s, dentry);
...
access s.name
...
release_dentry_name_snapshot(&s);
Replaces fsnotify_oldname_...(), gets used in fsnotify to obtain the name
to pass down with event.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull security layer fixes from James Morris:
"Bugfixes for TPM and SELinux"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
IB/core: Fix static analysis warning in ib_policy_change_task
IB/core: Fix uninitialized variable use in check_qp_port_pkey_settings
tpm: do not suspend/resume if power stays on
tpm: use tpm2_pcr_read() in tpm2_do_selftest()
tpm: use tpm_buf functions in tpm2_pcr_read()
tpm_tis: make ilb_base_addr static
tpm: consolidate the TPM startup code
tpm: Enable CLKRUN protocol for Braswell systems
tpm/tpm_crb: fix priv->cmd_size initialisation
tpm: fix a kernel memory leak in tpm-sysfs.c
tpm: Issue a TPM2_Shutdown for TPM2 devices.
Add "shutdown" to "struct class".
Thin archives migration by Nicholas Piggin.
THIN_ARCHIVES has been available for a while as an optional feature
only for PowerPC architecture, but we do not need two different
intermediate-artifact schemes.
Using thin archives instead of conventional incremental linking has
various advantages:
- save disk space for builds
- speed-up building a little
- fix some link issues (for example, allyesconfig on ARM) due to
more flexibility for the final linking
- work better with dead code elimination we are planning
As discussed before, this migration has been done unconditionally
so that any problems caused by this will show up with "git bisect".
With testing with 0-day and linux-next, some architectures actually
showed up problems, but they were trivial and all fixed now.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJZXsiSAAoJED2LAQed4NsGfqUQAIxbR4JcFCeGNNqgOV1q7Ban
CaMzVZWPum0Mq+JWzknHrCJQzBE+4BPLbOtZH4Y0YhjXVfc2/M8QkzEzSWyEPm03
FyaQ6WTq479mv7Ot2nAwaRSUYNSOuvlCx5KUOxITMJ/VmxwXXc9fCuT3ORu9opdK
4iyh0P2D+IeABQlrS5k1Rj+y4u/BtpiGY9U5RDssn7u8sjEgBHWFXFfE2fQ0No+0
1lzwa5EVyPHuq0XTBeZkPSDNxtou4iZzQC9QeNIYlyiod1G9deE4lzB55s+Qtkk0
h6rN9WF+Rvy7/hjFUJy0TDPNx0io2kdJxMaMKp2HaES49w5fHv7NAgxuipFC91vE
5UKs1sXxBe8dpPjfZWY7QSQ/JQv6NuG7NWcSGM29BWy3yFefSAXCggM+nn5IWzLH
pSutfOBGeceJdyKMcdn3AgcHCj0wddFxX8AXst+ZebnqVoNxR/Nu6HGmyaucwyp3
6fFTkbZ6DvOlu9MKbK0HSqrsT3DlAas2YWZKZ4Cc20wM99Z0OtFZlmpMCRIdiYtx
hZBwze/ElheUbZu6igH6UX2lpOlat0V6nT5vKHGGeOJlwkxduKi3Kj6zVSkCHic5
w3NLXr5FDWdkrMiC6/Z0Uae5mtAWOYyt6z1CwjgVmFrAkqlL8aWNagOcDCSFc1qR
+3Cv7pZQSRWy2TaaLMzo
=PAWi
-----END PGP SIGNATURE-----
Merge tag 'kbuild-thinar-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild thin archives updates from Masahiro Yamada:
"Thin archives migration by Nicholas Piggin.
THIN_ARCHIVES has been available for a while as an optional feature
only for PowerPC architecture, but we do not need two different
intermediate-artifact schemes.
Using thin archives instead of conventional incremental linking has
various advantages:
- save disk space for builds
- speed-up building a little
- fix some link issues (for example, allyesconfig on ARM) due to more
flexibility for the final linking
- work better with dead code elimination we are planning
As discussed before, this migration has been done unconditionally so
that any problems caused by this will show up with "git bisect".
With testing with 0-day and linux-next, some architectures actually
showed up problems, but they were trivial and all fixed now"
* tag 'kbuild-thinar-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
tile: remove unneeded extra-y in Makefile
kbuild: thin archives make default for all archs
x86/um: thin archives build fix
tile: thin archives fix linking
ia64: thin archives fix linking
sh: thin archives fix linking
kbuild: handle libs-y archives separately from built-in.o archives
kbuild: thin archives use P option to ar
kbuild: thin archives final link close --whole-archives option
ia64: remove unneeded extra-y in Makefile.gate
tile: fix dependency and .*.cmd inclusion for incremental build
sparc64: Use indirect calls in hamming weight stubs
- Use more portable shebang for Perl scripts
- Remove trailing spaces from GCC version in kernel log
- Make initramfs generation deterministic
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=C+WJ
-----END PGP SIGNATURE-----
Merge tag 'kbuild-misc-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull misc Kbuild updates from Masahiro Yamada:
- Use more portable shebang for Perl scripts
- Remove trailing spaces from GCC version in kernel log
- Make initramfs generation deterministic
* tag 'kbuild-misc-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: create deterministic initramfs directory listings
scripts/mkcompile_h: Remove trailing spaces from compiler version
scripts: Switch to more portable Perl shebang
This update consists of:
-- TAP13 framework and changes to some tests to convert to TAP13.
Converting kselftest output to standard format will help identify
run to run differences and pin point failures easily. TAP13 format
has been in use for several years and the output is human friendly.
Please find the specification:
https://testanything.org/tap-version-13-specification.html
Credit goes to Tim Bird for recommending TAP13 as a suitable format,
and to Grag KH for kick starting the work with help from Paul Elder
and Alice Ferrazzi
The first phase of the TAp13 conversion is included in this update.
Future updates will include updates to rest of the tests.
-- Masami Hiramatsu fixed ftrace to run on 4.9 stable kernels.
-- Kselftest documnetation has been converted to ReST format. Document
now has a new home under Documentation/dev-tools.
-- kselftest_harness.h is now available for general use as a result of
Mickaël Salaün's work.
-- Several fixes to skip and/or fail tests gracefully on older releases.
-----BEGIN PGP SIGNATURE-----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=j1Um
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.13-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
"This update consists of:
- TAP13 framework and changes to some tests to convert to TAP13.
Converting kselftest output to standard format will help identify
run to run differences and pin point failures easily. TAP13 format
has been in use for several years and the output is human friendly.
Please find the specification:
https://testanything.org/tap-version-13-specification.html
Credit goes to Tim Bird for recommending TAP13 as a suitable
format, and to Grag KH for kick starting the work with help from
Paul Elder and Alice Ferrazzi
The first phase of the TAp13 conversion is included in this update.
Future updates will include updates to rest of the tests.
- Masami Hiramatsu fixed ftrace to run on 4.9 stable kernels.
- Kselftest documnetation has been converted to ReST format. Document
now has a new home under Documentation/dev-tools.
- kselftest_harness.h is now available for general use as a result of
Mickaël Salaün's work.
- Several fixes to skip and/or fail tests gracefully on older
releases"
* tag 'linux-kselftest-4.13-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (48 commits)
selftests: membarrier: use ksft_* var arg msg api
selftests: breakpoints: breakpoint_test_arm64: convert test to use TAP13
selftests: breakpoints: step_after_suspend_test use ksft_* var arg msg api
selftests: breakpoint_test: use ksft_* var arg msg api
kselftest: add ksft_print_msg() function to output general information
kselftest: make ksft_* output functions variadic
selftests/capabilities: Fix the test_execve test
selftests: intel_pstate: add .gitignore
selftests: fix memory-hotplug test
selftests: add missing test name in memory-hotplug test
selftests: check percentage range for memory-hotplug test
selftests: check hot-pluggagble memory for memory-hotplug test
selftests: typo correction for memory-hotplug test
selftests: ftrace: Use md5sum to take less time of checking logs
tools/testing/selftests/sysctl: Add pre-check to the value of writes_strict
kselftest.rst: do some adjustments after ReST conversion
selftest/net/Makefile: Specify output with $(OUTPUT)
selftest/intel_pstate/aperf: Use LDLIBS instead of LDFLAGS
selftest/memfd/Makefile: Fix build error
selftests: lib: Skip tests on missing test modules
...
-----BEGIN PGP SIGNATURE-----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=aihT
-----END PGP SIGNATURE-----
Merge tag 'openrisc-for-linus' of git://github.com/openrisc/linux
Pull OpenRISC updates from Stafford Horne:
"Openrisc fixes for this 4.13 merge window, there is not really much
here:
- include cleanups, one with should reduce build time slightly
- switch to new toolchain to new (>2 year old) toolchain prefix"
* tag 'openrisc-for-linus' of git://github.com/openrisc/linux:
openrisc: defconfig: Cleanup from old Kconfig options
openrisc: explicitly include linux/bug.h in asm/fixmap.h
openrisc: Switch to use export.h instead of module.h
openrisc: Change toolchain from or32- to or1k-
Guilherme G. Piccoli