Enable VCN powergate status report on Raven.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN is widely used in new ASICs and different from tranditional
UVD and VCE.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Coccinelle reports a path that the array "data" is never initialized.
The path skips the checks in the conditional branches when either
of callback functions, read_wave_vgprs and read_wave_sgprs, is not
registered. Later, the uninitialized "data" array is read
in the while-loop below and passed to put_user().
Fix the path by allocating the array with kcalloc().
The patch is simplier than adding a fall-back branch that explicitly
calls memset(data, 0, ...). Also it does not need the multiplication
1024*sizeof(*data) as the size parameter for memset() though there is
no risk of integer overflow.
Signed-off-by: Wang Xiayang <xywang.sjtu@sjtu.edu.cn>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We always need to drop the ctx reference and should check
for errors first and then dereference the fence pointer.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Building the privcmd code as a loadable module on ARM, we get
a link error due to the private cache management functions:
ERROR: "__sync_icache_dcache" [drivers/xen/xen-privcmd.ko] undefined!
Move the code into a new that is always built in when Xen is enabled,
as suggested by Juergen Gross and Boris Ostrovsky.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
'commit df9bde015a ("xen/gntdev.c: convert to use vm_map_pages()")'
breaks gntdev driver. If vma->vm_pgoff > 0, vm_map_pages()
will:
- use map->pages starting at vma->vm_pgoff instead of 0
- verify map->count against vma_pages()+vma->vm_pgoff instead of just
vma_pages().
In practice, this breaks using a single gntdev FD for mapping multiple
grants.
relevant strace output:
[pid 857] ioctl(7, IOCTL_GNTDEV_MAP_GRANT_REF, 0x7ffd3407b6d0) = 0
[pid 857] mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, 7, 0) =
0x777f1211b000
[pid 857] ioctl(7, IOCTL_GNTDEV_SET_UNMAP_NOTIFY, 0x7ffd3407b710) = 0
[pid 857] ioctl(7, IOCTL_GNTDEV_MAP_GRANT_REF, 0x7ffd3407b6d0) = 0
[pid 857] mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, 7,
0x1000) = -1 ENXIO (No such device or address)
details here:
https://github.com/QubesOS/qubes-issues/issues/5199
The reason is -> ( copying Marek's word from discussion)
vma->vm_pgoff is used as index passed to gntdev_find_map_index. It's
basically using this parameter for "which grant reference to map".
map struct returned by gntdev_find_map_index() describes just the pages
to be mapped. Specifically map->pages[0] should be mapped at
vma->vm_start, not vma->vm_start+vma->vm_pgoff*PAGE_SIZE.
When trying to map grant with index (aka vma->vm_pgoff) > 1,
__vm_map_pages() will refuse to map it because it will expect map->count
to be at least vma_pages(vma)+vma->vm_pgoff, while it is exactly
vma_pages(vma).
Converting vm_map_pages() to use vm_map_pages_zero() will fix the
problem.
Marek has tested and confirmed the same.
Cc: stable@vger.kernel.org # v5.2+
Fixes: df9bde015a ("xen/gntdev.c: convert to use vm_map_pages()")
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
DPM state relates are not supported on the new SW SMU ASICs. But still
it's not OK to trigger null pointer dereference on accessing them.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The PCI revision id determines the sku.
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
in this patch,
drm/amd/powerplay: add callback function of get_thermal_temperature_range
the driver missed temperature granularity change on other temperature.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. the thermal temperature is asic related data, move the code logic to
xxx_ppt.c.
2. replace data structure PP_TemperatureRange with
smu_temperature_range.
3. change temperature uint from temp*1000 to temp (temperature uint).
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was missed during the addition of VegaM support
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We already have tested it before. The second one should be removed.
With this change, the performance should have little improvement.
Link: http://lkml.kernel.org/r/20190730140850.7927-1-changbin.du@gmail.com
Cc: stable@vger.kernel.org
Fixes: 9cd2992f2d ("fgraph: Have set_graph_notrace only affect function_graph tracer")
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
These include guards are broken.
Match the #if !define() and #define lines so that they work correctly.
Link: http://lkml.kernel.org/r/20190720103943.16982-1-yamada.masahiro@socionext.com
Fixes: f54d186700 ("dma-buf: Rename struct fence to dma_fence")
Fixes: 2e26ca7150 ("tracing: Fix tracepoint.h DECLARE_TRACE() to allow more than one header")
Fixes: e543002f77 ("qdisc: add tracepoint qdisc:qdisc_dequeue for dequeued SKBs")
Fixes: 95f295f9fe ("dmaengine: tegra: add tracepoints to driver")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull dax fix from Dan Williams:
"Fix a botched manual patch update that got dropped between testing and
application"
* 'dax-fix-5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: Fix missed wakeup in put_unlocked_entry()
If a device doesn't support DAX its 'dax_dev' is NULL. Fix
device_synchronous() to first check if dax_dev is NULL before
dereferencing it.
Fixes: 2e9ee0955d ("dm: enable synchronous dax")
Reported-by: jencce.kernel@gmail.com
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The generic VDSO implementation uses the Y2038 safe clock_gettime64() and
clock_getres_time64() syscalls as fallback for 32bit VDSO. This breaks
seccomp setups because these syscalls might be not (yet) allowed.
Implement the 32bit variants which use the legacy syscalls and select the
variant in the core library.
The 64bit time variants are not removed because they are required for the
time64 based vdso accessors.
Fixes: 00b26474c2 ("lib/vdso: Provide generic VDSO implementation")
Reported-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lkml.kernel.org/r/20190728131648.971361611@linutronix.de
The generic VDSO implementation uses the Y2038 safe clock_gettime64() and
clock_getres_time64() syscalls as fallback for 32bit VDSO. This breaks
seccomp setups because these syscalls might be not (yet) allowed.
Implement the 32bit variants which use the legacy syscalls and select the
variant in the core library.
The 64bit time variants are not removed because they are required for the
time64 based vdso accessors.
Fixes: 7ac8707479 ("x86/vdso: Switch to generic vDSO implementation")
Reported-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20190728131648.879156507@linutronix.de
To address the regression which causes seccomp to deny applications the
access to clock_gettime64() and clock_getres64() syscalls because they
are not enabled in the existing filters.
That trips over the fact that 32bit VDSOs use the new clock_gettime64() and
clock_getres64() syscalls in the fallback path.
Add a conditional to invoke the 32bit legacy fallback syscalls instead of
the new 64bit variants. The conditional can go away once all architectures
are converted.
Fixes: 00b26474c2 ("lib/vdso: Provide generic VDSO implementation")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907301134470.1738@nanos.tec.linutronix.de
To allow syscall fallbacks using the legacy 32bit syscall for 32bit VDSO
builds, move the fallback invocation out into the callers.
Split the common code out of __cvdso_clock_gettime/getres() and invoke the
syscall fallback in the 64bit and 32bit variants.
Preparatory work for using legacy syscalls in 32bit VDSO. No functional
change.
Fixes: 00b26474c2 ("lib/vdso: Provide generic VDSO implementation")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lkml.kernel.org/r/20190728131648.695579736@linutronix.de
The 32bit variants of vdso_clock_gettime()/getres() have a NULL pointer
check for the timespec pointer. That's inconsistent vs. 64bit.
But the vdso implementation will never be consistent versus the syscall
because the only case which it can handle is NULL. Any other invalid
pointer will cause a segfault. So special casing NULL is not really useful.
Remove it along with the superflouos syscall fallback invocation as that
will return -EFAULT anyway. That also gets rid of the dubious typecast
which only works because the pointer is NULL.
Fixes: 00b26474c2 ("lib/vdso: Provide generic VDSO implementation")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20190728131648.587523358@linutronix.de
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXUCO6AAKCRCRxhvAZXjc
ojpPAP9w0DAQbItLqcgdsad3fbHibUs5Ix7TUy0qIRgan2QF2AEAzWmo2DVGvRk3
yI+NnzVXX63iUqv5hBtCNy68TUWyXgc=
=WSnj
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20190730' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull pidfd fixes from Christian Brauner:
"This makes setting the exit_state in exit_notify() consistent after
fixing the pidfd polling race pre-rc1. Related to the race fix, this
adds a WARN_ON() to do_notify_pidfd() to catch any future exit_state
races.
Last, this removes an obsolete comment from the pidfd tests"
* tag 'for-linus-20190730' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
exit: make setting exit_state consistent
pidfd: Add warning if exit_state is 0 during notification
pidfd: remove obsolete comments from test
This set of patches adjust to follow recent setflags changes and fix two
regression introduced since 5.4-rc1.
-----BEGIN PGP SIGNATURE-----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=TSfD
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs fixes from Jaegeuk Kim:
"This set of patches adjust to follow recent setflags changes and fix
two regressions"
* tag 'f2fs-for-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: use EINVAL for superblock with invalid magic
f2fs: fix to read source block before invalidating it
f2fs: remove redundant check from f2fs_setflags_common()
f2fs: use generic checking function for FS_IOC_FSSETXATTR
f2fs: use generic checking and prep function for FS_IOC_SETFLAGS
This Kselftest update for Linux 5.3-rc3 consists of minor fixes to
tests and one major fix to livepatch test to add skip handling to
avoid false fail reports when livepatch is disabled.
-----BEGIN PGP SIGNATURE-----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=qYbT
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Minor fixes to tests and one major fix to livepatch test to add skip
handling to avoid false fail reports when livepatch is disabled"
* tag 'linux-kselftest-5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/livepatch: add test skip handling
selftests: mlxsw: Fix typo in qos_mc_aware.sh
selftests/x86: fix spelling mistake "FAILT" -> "FAIL"
selftests: kmod: Fix typo in kmod.sh
A few regression and bug fixes for the patches merged in the last cycle:
- hns fixes a subtle crash from the ib core SGL rework
- hfi1 fixes various error handling, oops and protocol errors
- bnxt_re fixes a regression where nvmeof doesn't work on some
configurations
- mlx5 fixes a serious 'use after free' bug in how MR caching is handled
- Some edge case crashers in the new statistic core code
- More siw static checker fixups
-----BEGIN PGP SIGNATURE-----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=tRje
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"A few regression and bug fixes for the patches merged in the last
cycle:
- hns fixes a subtle crash from the ib core SGL rework
- hfi1 fixes various error handling, oops and protocol errors
- bnxt_re fixes a regression where nvmeof doesn't work on some
configurations
- mlx5 fixes a serious 'use after free' bug in how MR caching is
handled
- some edge case crashers in the new statistic core code
- more siw static checker fixups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/mlx5: Fix RSS Toeplitz setup to be aligned with the HW specification
IB/counters: Always initialize the port counter object
IB/core: Fix querying total rdma stats
IB/mlx5: Prevent concurrent MR updates during invalidation
IB/mlx5: Fix clean_mr() to work in the expected order
IB/mlx5: Move MRs to a kernel PD when freeing them to the MR cache
IB/mlx5: Use direct mkey destroy command upon UMR unreg failure
IB/mlx5: Fix unreg_umr to ignore the mkey state
RDMA/siw: Remove set but not used variables 'rv'
IB/mlx5: Replace kfree with kvfree
RDMA/bnxt_re: Honor vlan_id in GID entry comparison
IB/hfi1: Drop all TID RDMA READ RESP packets after r_next_psn
IB/hfi1: Field not zero-ed when allocating TID flow memory
IB/hfi1: Unreserve a flushed OPFN request
IB/hfi1: Check for error on call to alloc_rsm_map_table
RDMA/hns: Fix sg offset non-zero issue
RDMA/siw: Fix error return code in siw_init_module()
Fix the locking around nouveau's use of the hmm_range_* APIs. It works
correctly in the success case, but many of the the edge cases have missing
unlocks or double unlocks.
-----BEGIN PGP SIGNATURE-----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=ZdrW
-----END PGP SIGNATURE-----
Merge tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull HMM fixes from Jason Gunthorpe:
"Fix the locking around nouveau's use of the hmm_range_* APIs. It works
correctly in the success case, but many of the the edge cases have
missing unlocks or double unlocks.
The diffstat is a bit big as Christoph did a comprehensive job to move
the obsolete API from the core header and into the driver before
fixing its flow, but the risk of regression from this code motion is
low"
* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
nouveau: unlock mmap_sem on all errors from nouveau_range_fault
nouveau: remove the block parameter to nouveau_range_fault
mm/hmm: move hmm_vma_range_done and hmm_vma_fault to nouveau
mm/hmm: always return EBUSY for invalid ranges in hmm_range_{fault,snapshot}
Commit 33ec3e53e7 ("loop: Don't change loop device under exclusive
opener") made LOOP_SET_FD ioctl acquire exclusive block device reference
while it updates loop device binding. However this can make perfectly
valid mount(2) fail with EBUSY due to racing LOOP_SET_FD holding
temporarily the exclusive bdev reference in cases like this:
for i in {a..z}{a..z}; do
dd if=/dev/zero of=$i.image bs=1k count=0 seek=1024
mkfs.ext2 $i.image
mkdir mnt$i
done
echo "Run"
for i in {a..z}{a..z}; do
mount -o loop -t ext2 $i.image mnt$i &
done
Fix the problem by not getting full exclusive bdev reference in
LOOP_SET_FD but instead just mark the bdev as being claimed while we
update the binding information. This just blocks new exclusive openers
instead of failing them with EBUSY thus fixing the problem.
Fixes: 33ec3e53e7 ("loop: Don't change loop device under exclusive opener")
Cc: stable@vger.kernel.org
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In xchk_da_btree_block_check_sibling(), there is an if statement on
line 274 to check whether ds->state->altpath.blk[level].bp is NULL:
if (ds->state->altpath.blk[level].bp)
When ds->state->altpath.blk[level].bp is NULL, it is used on line 281:
xfs_trans_brelse(..., ds->state->altpath.blk[level].bp);
struct xfs_buf_log_item *bip = bp->b_log_item;
ASSERT(bp->b_transp == tp);
Thus, possible null-pointer dereferences may occur.
To fix these bugs, ds->state->altpath.blk[level].bp is checked before
being used.
These bugs are found by a static analysis tool STCheck written by us.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Since commit b191d6491b ("pidfd: fix a poll race when setting exit_state")
we unconditionally set exit_state to EXIT_ZOMBIE before calling into
do_notify_parent(). This was done to eliminate a race when querying
exit_state in do_notify_pidfd().
Back then we decided to do the absolute minimal thing to fix this and
not touch the rest of the exit_notify() function where exit_state is
set.
Since this fix has not caused any issues change the setting of
exit_state to EXIT_DEAD in the autoreap case to account for the fact hat
exit_state is set to EXIT_ZOMBIE unconditionally. This fix was planned
but also explicitly requested in [1] and makes the whole code more
consistent.
/* References */
[1]: https://lore.kernel.org/lkml/CAHk-=wigcxGFR2szue4wavJtH5cYTTeNES=toUBVGsmX0rzX+g@mail.gmail.com
Signed-off-by: Christian Brauner <christian@brauner.io>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
In qla2x00_alloc_fcport(), fcport is assigned to NULL in the error
handling code on line 4880:
fcport = NULL;
Then fcport is used on lines 4883-4886:
INIT_WORK(&fcport->del_work, qla24xx_delete_sess_fn);
INIT_WORK(&fcport->reg_work, qla_register_fcport_fn);
INIT_LIST_HEAD(&fcport->gnl_entry);
INIT_LIST_HEAD(&fcport->list);
Thus, possible null-pointer dereferences may occur.
To fix these bugs, qla2x00_alloc_fcport() directly returns NULL
in the error handling code.
These bugs are found by a static analysis tool STCheck written by us.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Although SAS3 & SAS3.5 IT HBA controllers support 64-bit DMA addressing, as
per hardware design, if DMA-able range contains all 64-bits
set (0xFFFFFFFF-FFFFFFFF) then it results in a firmware fault.
E.g. SGE's start address is 0xFFFFFFFF-FFFF000 and data length is 0x1000
bytes. when HBA tries to DMA the data at 0xFFFFFFFF-FFFFFFFF location then
HBA will fault the firmware.
Driver will set 63-bit DMA mask to ensure the above address will not be
used.
Cc: <stable@vger.kernel.org> # 5.1.20+
Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove racy printing of internal commands. Completion thread can be
cleaning up the command in parallel.
Reviewed-by: Bader Ali - Saleh <bader.alisaleh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bader Ali - Saleh <bader.alisaleh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The fiemap handler locks a file range that can have unflushed delalloc,
and after locking the range, it tries to attach to a running transaction.
If the running transaction started its commit, that is, it is in state
TRANS_STATE_COMMIT_START, and either the filesystem was mounted with the
flushoncommit option or the transaction is creating a snapshot for the
subvolume that contains the file that fiemap is operating on, we end up
deadlocking. This happens because fiemap is blocked on the transaction,
waiting for it to complete, and the transaction is waiting for the flushed
dealloc to complete, which requires locking the file range that the fiemap
task already locked. The following stack traces serve as an example of
when this deadlock happens:
(...)
[404571.515510] Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs]
[404571.515956] Call Trace:
[404571.516360] ? __schedule+0x3ae/0x7b0
[404571.516730] schedule+0x3a/0xb0
[404571.517104] lock_extent_bits+0x1ec/0x2a0 [btrfs]
[404571.517465] ? remove_wait_queue+0x60/0x60
[404571.517832] btrfs_finish_ordered_io+0x292/0x800 [btrfs]
[404571.518202] normal_work_helper+0xea/0x530 [btrfs]
[404571.518566] process_one_work+0x21e/0x5c0
[404571.518990] worker_thread+0x4f/0x3b0
[404571.519413] ? process_one_work+0x5c0/0x5c0
[404571.519829] kthread+0x103/0x140
[404571.520191] ? kthread_create_worker_on_cpu+0x70/0x70
[404571.520565] ret_from_fork+0x3a/0x50
[404571.520915] kworker/u8:6 D 0 31651 2 0x80004000
[404571.521290] Workqueue: btrfs-flush_delalloc btrfs_flush_delalloc_helper [btrfs]
(...)
[404571.537000] fsstress D 0 13117 13115 0x00004000
[404571.537263] Call Trace:
[404571.537524] ? __schedule+0x3ae/0x7b0
[404571.537788] schedule+0x3a/0xb0
[404571.538066] wait_current_trans+0xc8/0x100 [btrfs]
[404571.538349] ? remove_wait_queue+0x60/0x60
[404571.538680] start_transaction+0x33c/0x500 [btrfs]
[404571.539076] btrfs_check_shared+0xa3/0x1f0 [btrfs]
[404571.539513] ? extent_fiemap+0x2ce/0x650 [btrfs]
[404571.539866] extent_fiemap+0x2ce/0x650 [btrfs]
[404571.540170] do_vfs_ioctl+0x526/0x6f0
[404571.540436] ksys_ioctl+0x70/0x80
[404571.540734] __x64_sys_ioctl+0x16/0x20
[404571.540997] do_syscall_64+0x60/0x1d0
[404571.541279] entry_SYSCALL_64_after_hwframe+0x49/0xbe
(...)
[404571.543729] btrfs D 0 14210 14208 0x00004000
[404571.544023] Call Trace:
[404571.544275] ? __schedule+0x3ae/0x7b0
[404571.544526] ? wait_for_completion+0x112/0x1a0
[404571.544795] schedule+0x3a/0xb0
[404571.545064] schedule_timeout+0x1ff/0x390
[404571.545351] ? lock_acquire+0xa6/0x190
[404571.545638] ? wait_for_completion+0x49/0x1a0
[404571.545890] ? wait_for_completion+0x112/0x1a0
[404571.546228] wait_for_completion+0x131/0x1a0
[404571.546503] ? wake_up_q+0x70/0x70
[404571.546775] btrfs_wait_ordered_extents+0x27c/0x400 [btrfs]
[404571.547159] btrfs_commit_transaction+0x3b0/0xae0 [btrfs]
[404571.547449] ? btrfs_mksubvol+0x4a4/0x640 [btrfs]
[404571.547703] ? remove_wait_queue+0x60/0x60
[404571.547969] btrfs_mksubvol+0x605/0x640 [btrfs]
[404571.548226] ? __sb_start_write+0xd4/0x1c0
[404571.548512] ? mnt_want_write_file+0x24/0x50
[404571.548789] btrfs_ioctl_snap_create_transid+0x169/0x1a0 [btrfs]
[404571.549048] btrfs_ioctl_snap_create_v2+0x11d/0x170 [btrfs]
[404571.549307] btrfs_ioctl+0x133f/0x3150 [btrfs]
[404571.549549] ? mem_cgroup_charge_statistics+0x4c/0xd0
[404571.549792] ? mem_cgroup_commit_charge+0x84/0x4b0
[404571.550064] ? __handle_mm_fault+0xe3e/0x11f0
[404571.550306] ? do_raw_spin_unlock+0x49/0xc0
[404571.550608] ? _raw_spin_unlock+0x24/0x30
[404571.550976] ? __handle_mm_fault+0xedf/0x11f0
[404571.551319] ? do_vfs_ioctl+0xa2/0x6f0
[404571.551659] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs]
[404571.552087] do_vfs_ioctl+0xa2/0x6f0
[404571.552355] ksys_ioctl+0x70/0x80
[404571.552621] __x64_sys_ioctl+0x16/0x20
[404571.552864] do_syscall_64+0x60/0x1d0
[404571.553104] entry_SYSCALL_64_after_hwframe+0x49/0xbe
(...)
If we were joining the transaction instead of attaching to it, we would
not risk a deadlock because a join only blocks if the transaction is in a
state greater then or equals to TRANS_STATE_COMMIT_DOING, and the delalloc
flush performed by a transaction is done before it reaches that state,
when it is in the state TRANS_STATE_COMMIT_START. However a transaction
join is intended for use cases where we do modify the filesystem, and
fiemap only needs to peek at delayed references from the current
transaction in order to determine if extents are shared, and, besides
that, when there is no current transaction or when it blocks to wait for
a current committing transaction to complete, it creates a new transaction
without reserving any space. Such unnecessary transactions, besides doing
unnecessary IO, can cause transaction aborts (-ENOSPC) and unnecessary
rotation of the precious backup roots.
So fix this by adding a new transaction join variant, named join_nostart,
which behaves like the regular join, but it does not create a transaction
when none currently exists or after waiting for a committing transaction
to complete.
Fixes: 03628cdbc6 ("Btrfs: do not start a transaction during fiemap")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When one transaction is finishing its commit, it is possible for another
transaction to start and enter its initial commit phase as well. If the
first ends up getting aborted, we have a small time window where the second
transaction commit does not notice that the previous transaction aborted
and ends up committing, writing a superblock that points to btrees that
reference extent buffers (nodes and leafs) that were not persisted to disk.
The consequence is that after mounting the filesystem again, we will be
unable to load some btree nodes/leafs, either because the content on disk
is either garbage (or just zeroes) or corresponds to the old content of a
previouly COWed or deleted node/leaf, resulting in the well known error
messages "parent transid verify failed on ...".
The following sequence diagram illustrates how this can happen.
CPU 1 CPU 2
<at transaction N>
btrfs_commit_transaction()
(...)
--> sets transaction state to
TRANS_STATE_UNBLOCKED
--> sets fs_info->running_transaction
to NULL
(...)
btrfs_start_transaction()
start_transaction()
wait_current_trans()
--> returns immediately
because
fs_info->running_transaction
is NULL
join_transaction()
--> creates transaction N + 1
--> sets
fs_info->running_transaction
to transaction N + 1
--> adds transaction N + 1 to
the fs_info->trans_list list
--> returns transaction handle
pointing to the new
transaction N + 1
(...)
btrfs_sync_file()
btrfs_start_transaction()
--> returns handle to
transaction N + 1
(...)
btrfs_write_and_wait_transaction()
--> writeback of some extent
buffer fails, returns an
error
btrfs_handle_fs_error()
--> sets BTRFS_FS_STATE_ERROR in
fs_info->fs_state
--> jumps to label "scrub_continue"
cleanup_transaction()
btrfs_abort_transaction(N)
--> sets BTRFS_FS_STATE_TRANS_ABORTED
flag in fs_info->fs_state
--> sets aborted field in the
transaction and transaction
handle structures, for
transaction N only
--> removes transaction from the
list fs_info->trans_list
btrfs_commit_transaction(N + 1)
--> transaction N + 1 was not
aborted, so it proceeds
(...)
--> sets the transaction's state
to TRANS_STATE_COMMIT_START
--> does not find the previous
transaction (N) in the
fs_info->trans_list, so it
doesn't know that transaction
was aborted, and the commit
of transaction N + 1 proceeds
(...)
--> sets transaction N + 1 state
to TRANS_STATE_UNBLOCKED
btrfs_write_and_wait_transaction()
--> succeeds writing all extent
buffers created in the
transaction N + 1
write_all_supers()
--> succeeds
--> we now have a superblock on
disk that points to trees
that refer to at least one
extent buffer that was
never persisted
So fix this by updating the transaction commit path to check if the flag
BTRFS_FS_STATE_TRANS_ABORTED is set on fs_info->fs_state if after setting
the transaction to the TRANS_STATE_COMMIT_START we do not find any previous
transaction in the fs_info->trans_list. If the flag is set, just fail the
transaction commit with -EROFS, as we do in other places. The exact error
code for the previous transaction abort was already logged and reported.
Fixes: 49b25e0540 ("btrfs: enhance transaction abort infrastructure")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When doing an incremental send operation we can fail if we previously did
deduplication operations against a file that exists in both snapshots. In
that case we will fail the send operation with -EIO and print a message
to dmesg/syslog like the following:
BTRFS error (device sdc): Send: inconsistent snapshot, found updated \
extent for inode 257 without updated inode item, send root is 258, \
parent root is 257
This requires that we deduplicate to the same file in both snapshots for
the same amount of times on each snapshot. The issue happens because a
deduplication only updates the iversion of an inode and does not update
any other field of the inode, therefore if we deduplicate the file on
each snapshot for the same amount of time, the inode will have the same
iversion value (stored as the "sequence" field on the inode item) on both
snapshots, therefore it will be seen as unchanged between in the send
snapshot while there are new/updated/deleted extent items when comparing
to the parent snapshot. This makes the send operation return -EIO and
print an error message.
Example reproducer:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
# Create our first file. The first half of the file has several 64Kb
# extents while the second half as a single 512Kb extent.
$ xfs_io -f -s -c "pwrite -S 0xb8 -b 64K 0 512K" /mnt/foo
$ xfs_io -c "pwrite -S 0xb8 512K 512K" /mnt/foo
# Create the base snapshot and the parent send stream from it.
$ btrfs subvolume snapshot -r /mnt /mnt/mysnap1
$ btrfs send -f /tmp/1.snap /mnt/mysnap1
# Create our second file, that has exactly the same data as the first
# file.
$ xfs_io -f -c "pwrite -S 0xb8 0 1M" /mnt/bar
# Create the second snapshot, used for the incremental send, before
# doing the file deduplication.
$ btrfs subvolume snapshot -r /mnt /mnt/mysnap2
# Now before creating the incremental send stream:
#
# 1) Deduplicate into a subrange of file foo in snapshot mysnap1. This
# will drop several extent items and add a new one, also updating
# the inode's iversion (sequence field in inode item) by 1, but not
# any other field of the inode;
#
# 2) Deduplicate into a different subrange of file foo in snapshot
# mysnap2. This will replace an extent item with a new one, also
# updating the inode's iversion by 1 but not any other field of the
# inode.
#
# After these two deduplication operations, the inode items, for file
# foo, are identical in both snapshots, but we have different extent
# items for this inode in both snapshots. We want to check this doesn't
# cause send to fail with an error or produce an incorrect stream.
$ xfs_io -r -c "dedupe /mnt/bar 0 0 512K" /mnt/mysnap1/foo
$ xfs_io -r -c "dedupe /mnt/bar 512K 512K 512K" /mnt/mysnap2/foo
# Create the incremental send stream.
$ btrfs send -p /mnt/mysnap1 -f /tmp/2.snap /mnt/mysnap2
ERROR: send ioctl failed with -5: Input/output error
This issue started happening back in 2015 when deduplication was updated
to not update the inode's ctime and mtime and update only the iversion.
Back then we would hit a BUG_ON() in send, but later in 2016 send was
updated to return -EIO and print the error message instead of doing the
BUG_ON().
A test case for fstests follows soon.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203933
Fixes: 1c919a5e13 ("btrfs: don't update mtime/ctime on deduped inodes")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
CLANG_FLAGS is initialized by the following line:
CLANG_FLAGS := --target=$(notdir $(CROSS_COMPILE:%-=%))
..., which is run only when CROSS_COMPILE is set.
Some build targets (bindeb-pkg etc.) recurse to the top Makefile.
When you build the kernel with Clang but without CROSS_COMPILE,
the same compiler flags such as -no-integrated-as are accumulated
into CLANG_FLAGS.
If you run 'make CC=clang' and then 'make CC=clang bindeb-pkg',
Kbuild will recompile everything needlessly due to the build command
change.
Fix this by correctly initializing CLANG_FLAGS.
Fixes: 238bcbc4e0 ("kbuild: consolidate Clang compiler flags")
Cc: <stable@vger.kernel.org> # v5.0+
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Mark switch cases where we are expecting to fall through.
Fixes errors such as below, seen with mpc85xx_defconfig:
arch/powerpc/kernel/align.c: In function 'emulate_spe':
arch/powerpc/kernel/align.c:178:8: error: this statement may fall through
ret |= __get_user_inatomic(temp.v[3], p++);
^~
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190730141917.21817-1-mpe@ellerman.id.au
If CONFIG_DRM_TOSHIBA_TC358764=y but CONFIG_DRM_KMS_HELPER=m,
building fails:
drivers/gpu/drm/bridge/tc358764.o:(.rodata+0x228): undefined reference to `drm_atomic_helper_connector_reset'
drivers/gpu/drm/bridge/tc358764.o:(.rodata+0x240): undefined reference to `drm_helper_probe_single_connector_modes'
drivers/gpu/drm/bridge/tc358764.o:(.rodata+0x268): undefined reference to `drm_atomic_helper_connector_duplicate_state'
drivers/gpu/drm/bridge/tc358764.o:(.rodata+0x270): undefined reference to `drm_atomic_helper_connector_destroy_state'
Like TC358767, select DRM_KMS_HELPER to fix this, and
change to select DRM_PANEL to avoid recursive dependency.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: f38b7cca6d ("drm/bridge: tc358764: Add DSI to LVDS bridge driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190729090520.25968-1-yuehaibing@huawei.com
If DRM_LVDS_ENCODER=y but CONFIG_DRM_KMS_HELPER=m,
build fails:
drivers/gpu/drm/bridge/lvds-encoder.o: In function `lvds_encoder_probe':
lvds-encoder.c:(.text+0x155): undefined reference to `devm_drm_panel_bridge_add'
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: dbb58bfd9a ("drm/bridge: Fix lvds-encoder since the panel_bridge rework.")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190729071216.27488-1-yuehaibing@huawei.com
Currently, nvdimm subsystem expects the device numa node for SCM device to be
an online node. It also doesn't try to bring the device numa node online. Hence
if we use a non-online numa node as device node we hit crashes like below. This
is because we try to access uninitialized NODE_DATA in different code paths.
cpu 0x0: Vector: 300 (Data Access) at [c0000000fac53170]
pc: c0000000004bbc50: ___slab_alloc+0x120/0xca0
lr: c0000000004bc834: __slab_alloc+0x64/0xc0
sp: c0000000fac53400
msr: 8000000002009033
dar: 73e8
dsisr: 80000
current = 0xc0000000fabb6d80
paca = 0xc000000003870000 irqmask: 0x03 irq_happened: 0x01
pid = 7, comm = kworker/u16:0
Linux version 5.2.0-06234-g76bd729b2644 (kvaneesh@ltc-boston123) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #135 SMP Thu Jul 11 05:36:30 CDT 2019
enter ? for help
[link register ] c0000000004bc834 __slab_alloc+0x64/0xc0
[c0000000fac53400] c0000000fac53480 (unreliable)
[c0000000fac53500] c0000000004bc818 __slab_alloc+0x48/0xc0
[c0000000fac53560] c0000000004c30a0 __kmalloc_node_track_caller+0x3c0/0x6b0
[c0000000fac535d0] c000000000cfafe4 devm_kmalloc+0x74/0xc0
[c0000000fac53600] c000000000d69434 nd_region_activate+0x144/0x560
[c0000000fac536d0] c000000000d6b19c nd_region_probe+0x17c/0x370
[c0000000fac537b0] c000000000d6349c nvdimm_bus_probe+0x10c/0x230
[c0000000fac53840] c000000000cf3cc4 really_probe+0x254/0x4e0
[c0000000fac538d0] c000000000cf429c driver_probe_device+0x16c/0x1e0
[c0000000fac53950] c000000000cf0b44 bus_for_each_drv+0x94/0x130
[c0000000fac539b0] c000000000cf392c __device_attach+0xdc/0x200
[c0000000fac53a50] c000000000cf231c bus_probe_device+0x4c/0xf0
[c0000000fac53a90] c000000000ced268 device_add+0x528/0x810
[c0000000fac53b60] c000000000d62a58 nd_async_device_register+0x28/0xa0
[c0000000fac53bd0] c0000000001ccb8c async_run_entry_fn+0xcc/0x1f0
[c0000000fac53c50] c0000000001bcd9c process_one_work+0x46c/0x860
[c0000000fac53d20] c0000000001bd4f4 worker_thread+0x364/0x5f0
[c0000000fac53db0] c0000000001c7260 kthread+0x1b0/0x1c0
[c0000000fac53e20] c00000000000b954 ret_from_kernel_thread+0x5c/0x68
The patch tries to fix this by picking the nearest online node as the SCM node.
This does have a problem of us losing the information that SCM node is
equidistant from two other online nodes. If applications need to understand these
fine-grained details we should express then like x86 does via
/sys/devices/system/node/nodeX/accessY/initiators/
With the patch we get
# numactl -H
available: 2 nodes (0-1)
node 0 cpus:
node 0 size: 0 MB
node 0 free: 0 MB
node 1 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
node 1 size: 130865 MB
node 1 free: 129130 MB
node distances:
node 0 1
0: 10 20
1: 20 10
# cat /sys/bus/nd/devices/region0/numa_node
0
# dmesg | grep papr_scm
[ 91.332305] papr_scm ibm,persistent-memory:ibm,pmemory@44104001: Region registered with target node 2 and online node 0
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190729095128.23707-1-aneesh.kumar@linux.ibm.com
syzbot found the following crash on:
general protection fault: 0000 [#1] SMP KASAN
RIP: 0010:snd_usb_pipe_sanity_check+0x80/0x130 sound/usb/helper.c:75
Call Trace:
snd_usb_motu_microbookii_communicate.constprop.0+0xa0/0x2fb sound/usb/quirks.c:1007
snd_usb_motu_microbookii_boot_quirk sound/usb/quirks.c:1051 [inline]
snd_usb_apply_boot_quirk.cold+0x163/0x370 sound/usb/quirks.c:1280
usb_audio_probe+0x2ec/0x2010 sound/usb/card.c:576
usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361
really_probe+0x281/0x650 drivers/base/dd.c:548
....
It was introduced in commit 801ebf1043 for checking pipe and endpoint
types. It is fixed by adding a check of the ep pointer in question.
BugLink: https://syzkaller.appspot.com/bug?extid=d59c4387bfb6eced94e2
Reported-by: syzbot <syzbot+d59c4387bfb6eced94e2@syzkaller.appspotmail.com>
Fixes: 801ebf1043 ("ALSA: usb-audio: Sanity checks for each pipe and EP types")
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Windows guest can't run after force-TDR with host log:
...
gvt: vgpu 1: workload shadow ppgtt isn't ready
gvt: vgpu 1: fail to dispatch workload, skip
...
The error is raised by set_context_ppgtt_from_shadow(), when it checks
and found the shadow_mm isn't marked as shadowed.
In work thread before each submission, a shadow_mm is set to shadowed in:
shadow_ppgtt_mm()
<-intel_vgpu_pin_mm()
<-prepare_workload()
<-dispatch_workload()
<-workload_thread()
However checking whether or not shadow_mm is shadowed is prior to it:
set_context_ppgtt_from_shadow()
<-dispatch_workload()
<-workload_thread()
In normal case, create workload will check the existence of shadow_mm,
if not it will create a new one and marked as shadowed. If already exist
it will reuse the old one. Since shadow_mm is reused, checking of shadowed
in set_context_ppgtt_from_shadow() actually always see the state set in
creation, but not the state set in intel_vgpu_pin_mm().
When force-TDR, all engines are reset, since it's not dmlr level, all
ppgtt_mm are invalidated but not destroyed. Invalidation will mark all
reused shadow_mm as not shadowed but still keeps in ppgtt_mm_list_head.
If workload submission phase those shadow_mm are reused with shadowed
not set, then set_context_ppgtt_from_shadow() will report error.
Pin for context after shadow_mm pinned and shadow pdps settled.
v2:
Move set_context_ppgtt_from_shadow() after prepare_workload(). (zhenyu)
v3:
Move set_context_ppgtt_from_shadow() after shadow pdps updated.(zhenyu)
Fixes: 4f15665ccb ("drm/i915: Add ppgtt to GVT GEM context")
Cc: stable@vger.kernel.org
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
GPU hang observed during the guest OCL conformance test which is caused
by THP GTT feature used durning the test.
It was observed the same GFN with different size (4K and 2M) requested
from the guest in GVT. So during the guest page dma map stage, it is
required to unmap first with orginal size and then remap again with
requested size.
Fixes: b901b252b6 ("drm/i915/gvt: Add 2M huge gtt support")
Cc: stable@vger.kernel.org
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Workload contains RB and WA_CTX which are in ggtt space,
if they aren't in valid ggtt space, the workload shouldn't be
shadowed and scanned. So checking them earlier to avoid shadow
them.
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Instead of silently return virtual ggtt entries that guest is allowed
to access, this patch add extra range check. If guest read out of
range, it will print a warning and return 0. If guest write out
of range, the write will be dropped without any message.
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Evan Quan