* GICv4.1 support
* 32bit host removal
PPC:
* secure (encrypted) using under the Protected Execution Framework
ultravisor
s390:
* allow disabling GISA (hardware interrupt injection) and protected
VMs/ultravisor support.
x86:
* New dirty bitmap flag that sets all bits in the bitmap when dirty
page logging is enabled; this is faster because it doesn't require bulk
modification of the page tables.
* Initial work on making nested SVM event injection more similar to VMX,
and less buggy.
* Various cleanups to MMU code (though the big ones and related
optimizations were delayed to 5.8). Instead of using cr3 in function
names which occasionally means eptp, KVM too has standardized on "pgd".
* A large refactoring of CPUID features, which now use an array that
parallels the core x86_features.
* Some removal of pointer chasing from kvm_x86_ops, which will also be
switched to static calls as soon as they are available.
* New Tigerlake CPUID features.
* More bugfixes, optimizations and cleanups.
Generic:
* selftests: cleanups, new MMU notifier stress test, steal-time test
* CSV output for kvm_stat.
KVM/MIPS has been broken since 5.5, it does not compile due to a patch committed
by MIPS maintainers. I had already prepared a fix, but the MIPS maintainers
prefer to fix it in generic code rather than KVM so they are taking care of it.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl6GOnIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMfxwf/ZKLZiRoaovXCOG71M/eHtQb8ZIqU
3MPy+On3eC5Sk/aBxWUL9EFZsbYG6kYdbZ1VOvG9XPBoLlnkDSm/IR0kaELHtnjj
oGVda/tvGn46Ne39y8xBptmb91WDcWH0vFthT/CwlMxAw3xjr+gG7Qyo+8F2CW6m
SSSuLiHSBnyO1cQKruBTHZ8qnR8LlnfXEqtd6Y4LFLic0LbLIoIdRcT3wjQrcZrm
Djd7wbTEYZjUfoqZ72ekwEDUsONcDLDSKcguDO9pSMSCGhpxCVT5Vy68KRpoIMs2
nzNWDKjvqQo5zb2+GWxJgkd12Hv+n7PCXZMbVrWBu1pQsewUns9m4mkpGw==
=6fGt
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- GICv4.1 support
- 32bit host removal
PPC:
- secure (encrypted) using under the Protected Execution Framework
ultravisor
s390:
- allow disabling GISA (hardware interrupt injection) and protected
VMs/ultravisor support.
x86:
- New dirty bitmap flag that sets all bits in the bitmap when dirty
page logging is enabled; this is faster because it doesn't require
bulk modification of the page tables.
- Initial work on making nested SVM event injection more similar to
VMX, and less buggy.
- Various cleanups to MMU code (though the big ones and related
optimizations were delayed to 5.8). Instead of using cr3 in
function names which occasionally means eptp, KVM too has
standardized on "pgd".
- A large refactoring of CPUID features, which now use an array that
parallels the core x86_features.
- Some removal of pointer chasing from kvm_x86_ops, which will also
be switched to static calls as soon as they are available.
- New Tigerlake CPUID features.
- More bugfixes, optimizations and cleanups.
Generic:
- selftests: cleanups, new MMU notifier stress test, steal-time test
- CSV output for kvm_stat"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (277 commits)
x86/kvm: fix a missing-prototypes "vmread_error"
KVM: x86: Fix BUILD_BUG() in __cpuid_entry_get_reg() w/ CONFIG_UBSAN=y
KVM: VMX: Add a trampoline to fix VMREAD error handling
KVM: SVM: Annotate svm_x86_ops as __initdata
KVM: VMX: Annotate vmx_x86_ops as __initdata
KVM: x86: Drop __exit from kvm_x86_ops' hardware_unsetup()
KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection
KVM: x86: Set kvm_x86_ops only after ->hardware_setup() completes
KVM: VMX: Configure runtime hooks using vmx_x86_ops
KVM: VMX: Move hardware_setup() definition below vmx_x86_ops
KVM: x86: Move init-only kvm_x86_ops to separate struct
KVM: Pass kvm_init()'s opaque param to additional arch funcs
s390/gmap: return proper error code on ksm unsharing
KVM: selftests: Fix cosmetic copy-paste error in vm_mem_region_move()
KVM: Fix out of range accesses to memslots
KVM: X86: Micro-optimize IPI fastpath delay
KVM: X86: Delay read msr data iff writes ICR MSR
KVM: PPC: Book3S HV: Add a capability for enabling secure guests
KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs
KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs
...
Invert and rename the kvm_cpuid() param that controls out-of-range logic
to better reflect the semantics of the affected callers, i.e. callers
that bypass the out-of-range logic do so because they are looking up an
exact guest CPUID entry, e.g. to query the maxphyaddr.
Similarly, rename kvm_cpuid()'s internal "found" to "exact" to clarify
that it tracks whether or not the exact requested leaf was found, as
opposed to any usable leaf being found.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rework the masking in the out-of-range CPUID logic to handle the
Hypervisor sub-classes, as well as the Centaur class if the guest
virtual CPU vendor is Centaur.
Masking against 0x80000000 only handles basic and extended leafs, which
results in Hypervisor range checks being performed against the basic
CPUID class, and Centuar range checks being performed against the
Extended class. E.g. if CPUID.0x40000000.EAX returns 0x4000000A and
there is no entry for CPUID.0x40000006, then function 0x40000006 would
be incorrectly reported as out of bounds.
While there is no official definition of what constitutes a class, the
convention established for Hypervisor classes effectively uses bits 31:8
as the mask by virtue of checking for different bases in increments of
0x100, e.g. KVM advertises its CPUID functions starting at 0x40000100
when HyperV features are advertised at the default base of 0x40000000.
The bad range check doesn't cause functional problems for any known VMM
because out-of-range semantics only come into play if the exact entry
isn't found, and VMMs either support a very limited Hypervisor range,
e.g. the official KVM range is 0x40000000-0x40000001 (effectively no
room for undefined leafs) or explicitly defines gaps to be zero, e.g.
Qemu explicitly creates zeroed entries up to the Centaur and Hypervisor
limits (the latter comes into play when providing HyperV features).
The bad behavior can be visually confirmed by dumping CPUID output in
the guest when running Qemu with a stable TSC, as Qemu extends the limit
of range 0x40000000 to 0x40000010 to advertise VMware's cpuid_freq,
without defining zeroed entries for 0x40000002 - 0x4000000f.
Note, documentation of Centaur/VIA CPUs is hard to come by. Designating
0xc0000000 - 0xcfffffff as the Centaur class is a best guess as to the
behavior of a real Centaur/VIA CPU.
Fixes: 43561123ab ("kvm: x86: Improve emulation of CPUID leaves 0BH and 1FH")
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add helpers to provide CPUID-based guest vendor checks, i.e. to do the
ugly register comparisons. Use the new helpers to check for an AMD
guest vendor in guest_cpuid_is_amd() as well as in the existing emulator
flows.
Using the new helpers fixes a _very_ theoretical bug where
guest_cpuid_is_amd() would get a false positive on a non-AMD virtual CPU
with a vendor string beginning with "Auth" due to the previous logic
only checking EBX. It also fixes a marginally less theoretically bug
where guest_cpuid_is_amd() would incorrectly return false for a guest
CPU with "AMDisbetter!" as its vendor string.
Fixes: a0c0feb579 ("KVM: x86: reserve bit 8 of non-leaf PDPEs and PML4Es in 64-bit mode on AMD")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Shuffle a few operand structs to the end of struct x86_emulate_ctxt and
update the cache creation to whitelist only the region of the emulation
context that is expected to be copied to/from user memory, e.g. the
instruction operands, registers, and fetch/io/mem caches.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the emulation context is dynamically allocated and not embedded
in struct kvm_vcpu, move its header, kvm_emulate.h, out of the public
asm directory and into KVM's private x86 directory.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds