Commit Graph

913 Commits

Author SHA1 Message Date
Kuba Pawlak f6fc86f2c5 Bluetooth: Fix possible deadlock in btusb
commit 8f9d02f470 introduced spinlocks
in btusb_work. This is run in a context of a worqueue and can be interrupted
by hardware irq. If it happens while spinlock is held, we have a deadlock.
Solution is to use _irqsave/_resore version of locking

[  466.460560] =================================
[  466.460565] [ INFO: inconsistent lock state ]
[  466.460572] 4.3.0-rc6+ #1 Tainted: G        W
[  466.460576] ---------------------------------
[  466.460582] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
[  466.460589] kworker/0:2/94 [HC0[0]:SC0[0]:HE1:SE1] takes:
[  466.460595]  (&(&data->rxlock)->rlock){?.-...}, at: [<ffffffffa0526923>] btusb_work+0xa3/0x3fd [btusb]
[  466.460621] {IN-HARDIRQ-W} state was registered at:
[  466.460625]   [<ffffffff811021b5>] __lock_acquire+0xc45/0x1e80
[  466.460638]   [<ffffffff811040d5>] lock_acquire+0xe5/0x1f0
[  466.460646]   [<ffffffff8182f108>] _raw_spin_lock+0x38/0x50
[  466.460657]   [<ffffffffa0525448>] btusb_recv_intr+0x38/0x170 [btusb]
[  466.460668]   [<ffffffffa0525626>] btusb_intr_complete+0xa6/0x130 [btusb]
[  466.460679]   [<ffffffff815d8f1e>] __usb_hcd_giveback_urb+0x8e/0x160
[  466.460690]   [<ffffffff815d911f>] usb_hcd_giveback_urb+0x3f/0x120
[  466.460698]   [<ffffffff81606e4d>] uhci_giveback_urb+0xad/0x280
[  466.460706]   [<ffffffff81608f64>] uhci_scan_schedule.part.33+0x6b4/0xbe0
[  466.460714]   [<ffffffff81609b50>] uhci_irq+0xd0/0x180
[  466.460722]   [<ffffffff815d8296>] usb_hcd_irq+0x26/0x40
[  466.460729]   [<ffffffff81117d40>] handle_irq_event_percpu+0x40/0x300
[  466.460739]   [<ffffffff81118040>] handle_irq_event+0x40/0x60
[  466.460746]   [<ffffffff8111af39>] handle_fasteoi_irq+0x89/0x150
[  466.460754]   [<ffffffff8101e0f3>] handle_irq+0x73/0x120
[  466.460763]   [<ffffffff81832f11>] do_IRQ+0x61/0x120
[  466.460772]   [<ffffffff8183084c>] ret_from_intr+0x0/0x31
[  466.460780]   [<ffffffff81697a77>] cpuidle_enter+0x17/0x20
[  466.460790]   [<ffffffff810f62c2>] call_cpuidle+0x32/0x60
[  466.460800]   [<ffffffff810f65a8>] cpu_startup_entry+0x2b8/0x3f0
[  466.460807]   [<ffffffff818214ca>] rest_init+0x13a/0x140
[  466.460817]   [<ffffffff81f76029>] start_kernel+0x4a3/0x4c4
[  466.460827]   [<ffffffff81f75339>] x86_64_start_reservations+0x2a/0x2c
[  466.460837]   [<ffffffff81f75485>] x86_64_start_kernel+0x14a/0x16d
[  466.460846] irq event stamp: 754913
[  466.460851] hardirqs last  enabled at (754913): [<ffffffff8182f4cc>] _raw_spin_unlock_irq+0x2c/0x40
[  466.460861] hardirqs last disabled at (754912): [<ffffffff8182f28d>] _raw_spin_lock_irq+0x1d/0x60
[  466.460869] softirqs last  enabled at (753024): [<ffffffff810aeaa0>] __do_softirq+0x380/0x490
[  466.460880] softirqs last disabled at (753009): [<ffffffff810aedef>] irq_exit+0x10f/0x120
[  466.460888]
               other info that might help us debug this:
[  466.460894]  Possible unsafe locking scenario:

[  466.460899]        CPU0
[  466.460903]        ----
[  466.460907]   lock(&(&data->rxlock)->rlock);
[  466.460915]   <Interrupt>
[  466.460918]     lock(&(&data->rxlock)->rlock);
[  466.460926]
                *** DEADLOCK ***

[  466.460935] 2 locks held by kworker/0:2/94:
[  466.460939]  #0:  ("events"){.+.+.+}, at: [<ffffffff810c69bb>] process_one_work+0x16b/0x660
[  466.460958]  #1:  ((&data->work)){+.+...}, at: [<ffffffff810c69bb>] process_one_work+0x16b/0x660
[  466.460974]

Signed-off-by: Kuba Pawlak <kubax.t.pawlak@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-05 04:03:11 +01:00
Julia Lawall c0859e2f4c Bluetooth: btmrvl: add missing of_node_put
for_each_compatible_node performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.

A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):

// <smpl>
@@
expression e;
local idexpression n;
@@

 for_each_compatible_node(n, ...) {
   ... when != of_node_put(n)
       when != e = n
(
   return n;
|
+  of_node_put(n);
?  return ...;
)
   ...
 }
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-25 21:03:29 +01:00
Dan Carpenter a1857390e2 Bluetooth: hci_bcm: checking for ERR_PTR instead of NULL
bt_skb_alloc() returns NULL on error, it never returns an ERR_PTR.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-22 11:32:47 +02:00
Marcel Holtmann 213445b2b4 Bluetooth: btintel: Enable extra Intel vendor events
The Intel Bluetooth controllers can emit extra vendor specific events in
error conditions or for debugging purposes. To make the life easier for
engineers, enable them by default. When the vendor_diag options has been
enabled, then additional debug events are also enabled.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-21 07:34:11 +03:00
Marcel Holtmann e4c534bbac Bluetooth: btusb: Set manufacturer for Intel bootloader devices
For Intel bootloader devices, set the manufacturer information so that
it becomes possible to decode the boot process.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-21 07:32:12 +03:00
Marcel Holtmann aee61f7aa8 Bluetooth: hci_uart: Provide initial manufacturer information
Provide an early indication about the manufacturer information so that
it can be forwarded into monitor channel.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-21 07:20:44 +03:00
Marcel Holtmann 22f8e9dbf6 Bluetooth: btusb: Add support for latest Apple controllers
The latest Apple Bluetooth controllers with Broadcom chip in it have
a small design change. Instead of including a USB hub with mouse and
keyboard devices, they are now HID interfaces on the same device.

T:  Bus=04 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 39 Spd=12   MxCh= 0
D:  Ver= 2.01 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=05ac ProdID=8290 Rev= 0.79
S:  Manufacturer=Broadcom Corp.
S:  Product=Bluetooth USB Host Controller
C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=  0mA
A:  FirstIf#= 2 IfCount= 4 Cls=ff(vend.) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=01 Driver=usbhid
E:  Ad=85(I) Atr=03(Int.) MxPS=   8 Ivl=10ms
I:* If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=usbhid
E:  Ad=86(I) Atr=03(Int.) MxPS=   8 Ivl=10ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 3 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 3 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 3 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 3 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 3 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb
E:  Ad=84(I) Atr=02(Bulk) MxPS=  32 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=  32 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)

The general layout of Bluetooth devices is that interface 0 is the main
interface and interface 1 is for audio data. This design obviously moves
it to main interface 2 and audio data on interface 3.

Starting with the MacBookPro12,1 (early 2015 models) the new Broadcom
BCM943602CS cards are used which show this interface layout.

usb 4-1.5: New USB device found, idVendor=05ac, idProduct=8290
usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1.5: Product: Bluetooth USB Host Controller
usb 4-1.5: Manufacturer: Broadcom Corp.
Bluetooth: hci0: BCM: chip id 102 build 0243
Bluetooth: hci0: BCM: product 05ac:8290
Bluetooth: hci0: BCM20703A1 Generic USB UHE Apple 20Mhz fcbga_X87

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-21 00:49:24 +02:00
Marcel Holtmann 49a5f782d0 Bluetooth: btusb: Set early vendor info for Intel and Broadcom
For the controllers from Intel and Broadcom (including Apple), it is
helpful to have the information about the manufacturer send out early.

This patch sets the hdev->manufacturer information which will be send
out before actually calling the vendor specific hdev->setup driver
callback.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-21 00:49:23 +02:00
Dmitry Tunin 18e0afab8c Bluetooth: ath3k: Add support of AR3012 0cf3:817b device
T: Bus=04 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0cf3 ProdID=817b Rev=00.02
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

BugLink: https://bugs.launchpad.net/bugs/1506615

Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
2015-10-21 00:49:23 +02:00
Dmitry Tunin cd355ff071 Bluetooth: ath3k: Add new AR3012 0930:021c id
This adapter works with the existing linux-firmware.

T:  Bus=01 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0930 ProdID=021c Rev=00.01
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

BugLink: https://bugs.launchpad.net/bugs/1502781

Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
2015-10-21 00:49:23 +02:00
Santtu Rekilä 2faf71ce90 Bluetooth: btusb: Add support for Foxconn/Lenovo BCM43142A0 (105b:e065)
Recently salvaged this 'BCM43142A0' WiFi/Bluetooth module from a Lenovo laptop
and noticed it doesn't work automatically, because the USB IDs are missing
from btusb.c.

Plugging in the adapter on Linux 4.1 (dmesg):
usb 3-3.3.3: new full-speed USB device number 90 using xhci_hcd
usb 3-3.3.3: New USB device found, idVendor=105b, idProduct=e065
usb 3-3.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3.3.3: Product: BCM43142A0
usb 3-3.3.3: Manufacturer: Broadcom Corp
usb 3-3.3.3: SerialNumber: 0090A286559E

/sys/kernel/debug/usb/devices:
T:  Bus=03 Lev=03 Prnt=22 Port=02 Cnt=02 Dev#= 90 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=105b ProdID=e065 Rev= 1.12
S:  Manufacturer=Broadcom Corp
S:  Product=BCM43142A0
S:  SerialNumber=0090A286559E
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=84(I) Atr=02(Bulk) MxPS=  32 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=  32 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)

Support for the chipset was added in commit 88f9b65 and a similar BCM43142
based device was added in commit 8f0c304.

To work around the issue, I got the firmware
(BCM43142A0_001.001.011.0122.0153) off a Windows installation of Broadcom
bluetooth driver and converted it to a .hcd -file via. hex2hcd and placed it
in /lib/firmware/brcm/BCM.hcd. After that:

$ echo "105b e065 0 19ff 0239" > /sys/bus/usb/drivers/btusb/new_id
...(plug in the adapter)
usb 3-3.3.3: new full-speed USB device number 91 using xhci_hcd
usb 3-3.3.3: New USB device found, idVendor=105b, idProduct=e065
usb 3-3.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3.3.3: Product: BCM43142A0
usb 3-3.3.3: Manufacturer: Broadcom Corp
usb 3-3.3.3: SerialNumber: 0090A286559E
Bluetooth: hci0: BCM: chip id 70
Bluetooth: hci0: BCM (001.001.011) build 0000
bluetooth hci0: firmware: direct-loading firmware brcm/BCM.hcd
Bluetooth: hci0: BCM (001.001.011) build 0154

Bam, now it works for me!

/sys/kernel/debug/usb/devices:
T:  Bus=03 Lev=03 Prnt=22 Port=02 Cnt=02 Dev#= 92 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=105b ProdID=e065 Rev= 1.12
S:  Manufacturer=Broadcom Corp
S:  Product=BCM43142A0
S:  SerialNumber=0090A286559E
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=84(I) Atr=02(Bulk) MxPS=  32 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=  32 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)

Signed-off-by: Santtu Rekilä <sare@r00t3d.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-21 00:49:23 +02:00
Marcel Holtmann 34cea41e84 Bluetooth: btbcm: Read USB product information for Apple devices
For the Apple Bluetooth devices, read the USB product information and
print them. This allows for easy mapping of chip and USB details.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-21 00:49:23 +02:00
Marcel Holtmann 8045ce2197 Bluetooth: btbcm: Fix firmware version number calculation
The calculation for the firmware version number is off by one bit.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-21 00:49:22 +02:00
Marcel Holtmann 6c9d435d35 Bluetooth: btusb: Mark BCM2045 devices to have broken link key commands
The BCM2045 seems to have a problem with the stored link key commands
and thus just mark them as broken.

  HCI Event: Command Complete (0x0e) plen 12
     Read Local Supported Features (0x04|0x0003) ncmd 1
     status 0x00
     Features: 0xff 0xff 0x8d 0xfe 0x8f 0xf9 0x00 0x80
  HCI Event: Command Complete (0x0e) plen 12
     Read Local Version Information (0x04|0x0001) ncmd 1
     status 0x00
     HCI Version: 2.0 (0x3) HCI Revision: 0x2000
     LMP Version: 2.0 (0x3) LMP Subversion: 0x410d
     Manufacturer: Broadcom Corporation (15)
  HCI Event: Command Complete (0x0e) plen 11
     Read Buffer Size (0x04|0x0005) ncmd 1
     status 0x00
     ACL MTU 1017:8 SCO MTU 64:0
  HCI Event: Command Complete (0x0e) plen 68
     Read Local Supported Commands (0x04|0x0002) ncmd 1
     status 0x00
     Commands: ffffff03feffcfffffffffff0300f8ff07
  HCI Event: Command Complete (0x0e) plen 4
     Delete Stored Link Key (0x03|0x0012) ncmd 1
     status 0x11 deleted 2048
     Error: Unsupported Feature or Parameter Value

From the looks of it, this device seems genuine and not one of the
devices that are neither Broadcom nor CSR devices in reality.

T: Bus=04 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0a5c ProdID=2045 Rev= 1.12
S: Manufacturer=Broadcom Corp
S: Product=BCM2045A
S: SerialNumber=000000000000
C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none)

Reported-and-tested-by: Julio González Mejías <juliolokooo@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-21 00:49:22 +02:00
Marcel Holtmann 3e24767b78 Bluetooth: btintel: Add diagnostic support for older controllers
For the older controllers like Wilkens Peak and Stone Peak, enabling the
traces requires to switch into manufacturer mode first. This patch does
exactly that, but only for these older controllers.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-21 00:49:22 +02:00
Marcel Holtmann d8270fbb3f Bluetooth: btintel: Set quirk for non-persistent diagnostic settings
For Intel controllers the diagnostics settings are not persistent over
HCI Reset. So set the quirk to programm them again on every power up.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-21 00:49:22 +02:00
Arnd Bergmann 7841d06e43 Bluetooth: bpa10x: fix BT_HCIUART dependency
The change to bpa10x to use the h4_recv_buf helper added a dependency
on BT_HCIUART. This was incorrectly added to Kconfig by adding a
'select' statement, which now in turn causes build failures
when CONFIG_TTY is not set:

warning: (BT_HCIBPA10X) selects BT_HCIUART which has unmet direct dependencies (NET && BT && TTY)
vers/built-in.o: In function `hci_uart_tty_receive':
fpga-mgr.c:(.text+0x282824): undefined reference to `tty_unthrottle'
drivers/built-in.o: In function `hci_uart_tty_ioctl':
fpga-mgr.c:(.text+0x282aa0): undefined reference to `n_tty_ioctl_helper'
drivers/built-in.o: In function `hci_uart_flush':

This replaces the 'select BT_HCIUART' dependency with 'depends on', which
does not have this kind of problem. Alternatively, one could add 'depends
on TTY', but avoiding 'select' on user-visible options is generally the
preferred choice as that does not introduce the potential for dependency
loops or incomplete dependency chains.

Fixes: 9148991924 ("Bluetooth: bpa10x: Fix missing BT_HCIUART dependency")
Fixes: 943cc59219 ("Bluetooth: bpa10x: Use h4_recv_buf helper for frame reassembly")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-21 00:49:22 +02:00
Marcel Holtmann 2220994e71 Bluetooth: btusb: Print information of Intel SfP lock states
The lock states from Intel SfP controllers can only be read once before
loading the firmware. So for debugging purposes, print them out.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-21 00:49:22 +02:00
Marcel Holtmann 6d2e50d240 Bluetooth: btintel: Add support for enabling tracing functionality
For Intel controllers with firmware that allows tracing of baseband
functionality this allows enabling it via set_diag driver callback.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-21 00:49:21 +02:00
Marcel Holtmann 9d08f50401 Bluetooth: btusb: Add support for Broadcom LM_DIAG interface
The Broadcom Bluetooth USB devices have a third interface that is
dedicated for LM_DIAG messages. The If#= 2 describes this interface
and it consists of one bulk in and one bulk endpoint.

T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 38 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=19ff ProdID=0239 Rev= 1.12
S:  Manufacturer=Broadcom Corp
S:  Product=BCM20702A0
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb
E:  Ad=84(I) Atr=02(Bulk) MxPS=  32 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=  32 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)

For all Broadcom based devices with this interface, the driver now
claims it and schedules URBs for it. This allows to capture the
LM_DIAG messages and allows forwarding them via hci_recv_diag into
the diagnostic channel of the Bluetooth subsystem.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-21 00:49:21 +02:00
Marcel Holtmann 9148991924 Bluetooth: bpa10x: Fix missing BT_HCIUART dependency
Selecting just BT_HCIUART_H4 is not enough and it also needs to select
BT_HCIUART to avoid this warning:

warning: (BT_HCIBPA10X) selects BT_HCIUART_H4 which has unmet direct
dependencies (NET && BT && BT_HCIUART)

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-21 00:48:13 +02:00
Marcel Holtmann 943cc59219 Bluetooth: bpa10x: Use h4_recv_buf helper for frame reassembly
The manually coded frame reassembly is actually broken. The h4_recv_buf
helper from the UART driver is a perfect fit for frame reassembly for
this driver. So just export that function and use it here as well.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-08 10:04:27 +03:00
Marcel Holtmann 881f7e86a1 Bluetooth: bpa10x: Add support for set_diag driver callback
The BPA-10x devices support tracing operation. Use the set_diag driver
callback to allow enabling and disabling that functionality.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-08 10:03:02 +03:00
Marcel Holtmann ddd68ec8f4 Bluetooth: bpa10x: Read revision information in setup stage
For debugging pruposes, read the revision string of the BPA-10x devices
and print it. For example one of the latest devices respond with the
string SNIF_102,BB930,02/01/18,10:37:56.

  < HCI Command: Vendor (0x3f|0x000e) plen 1
          07                                               .
  > HCI Event: Command Complete (0x0e) plen 49
        Vendor (0x3f|0x000e) ncmd 1
          Status: Success (0x00)
          53 4e 49 46 5f 31 30 32 2c 42 42 39 33 30 2c 30  SNIF_102,BB930,0
          32 2f 30 31 2f 31 38 2c 31 30 3a 33 37 3a 35 36  2/01/18,10:37:56
          00 00 00 00 00 00 00 00 00 00 00 00 00           .............

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-08 10:01:25 +03:00
Marcel Holtmann 075e1f5e6c Bluetooth: hci_bcm: Enable support for set_diag driver callback
The set_diag driver callback allows enabling and disabling the vendor
specific diagnostic information. Since Broadcom chips have support for
a dedicated LM_DIAG channel, hook it up accordingly.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-08 09:59:16 +03:00
Marcel Holtmann 94c58132c0 Bluetooth: hci_bcm: Enable parsing of LM_DIAG messages
The Broadcom UART based controllers can send LM_DIAG messages with the
identifier 0x07 inside the HCI stream. These messages are 63 octets in
size and have no variable payload or length indicator.

This patch adds correct parsing information for the h4_recv_buf handler
and in case these packets are received, they are forwarded to the
Bluetooth core via hci_recv_diag interface.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-08 09:53:16 +03:00
Marcel Holtmann 9bc63ca090 Bluetooth: btbcm: Read the local name in setup stage
The Broadcom Bluetooth controllers have the chip name included in the
ROM firmware or later in the patchram firmware. For debugging purposes
read the local name and print it out. This is only done during setup
stage and only once before loading the firmware and once after loading
the firmware.

For the Broadcom based controllers from Apple, the name is only read once
after determining the chip id.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-07 07:41:11 +03:00
Marcel Holtmann e9ca8bf157 Bluetooth: Move handling of HCI_RUNNING flag into core
Setting and clearing of HCI_RUNNING flag in each and every driver is
just duplicating the same code all over the place. So instead of having
the driver do it in their hdev->open and hdev->close callbacks, set it
globally in the core transport handling.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-05 10:30:25 +03:00
Marcel Holtmann 73d0d3c867 Bluetooth: Move HCI_RUNNING check into hci_send_frame
In all callbacks for hdev->send the status of HCI_RUNNING is checked. So
instead of repeating that code in every driver, move the check into the
hci_send_frame function before calling hdev->send.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-05 10:30:10 +03:00
Marcel Holtmann b224d3ff71 Bluetooth: btbcm: Send HCI Reset before sending Apple specific commands
The commit 7bee8b08c4 allows the Read Verbose Config Info to fail
gracefully and not cause the controller setup to abort. It seems the
reason that command failed in the first place was the missing HCI Reset
to bring the controller in full Bluetooth mode.

Apple Bluetooth controllers start out in HID mode and when in that mode
the Read Verbose Config Info command is not allowed. Sending HCI Reset
switches the controller into full HCI mode.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-05 10:28:41 +03:00
Loic Poulain d06f107bcd Bluetooth: btintel: Add iBT register access over HCI support
Add regmap ibt to support Intel Bluetooth silicon register access
over HCI. Intel BT/FM combo chip allows to read/write some registers
(e.g. FM registers) via its HCI interface.

Read/Write operations are performed via a HCI transaction composed of
a HCI command (host->controller) followed by a HCI command complete
event (controller->host). Read/Write Command opcodes can be specified
to the regmap init function.
We define data formats which are intel/vendor specific.

Register Read/Write HCI command payload (Host):
Field: | REG ADDR | MODE | DATA_LEN | DATA... |
size:  |   32b    |  8b  |    8b    |  8b*    |

Register Read HCI command complete event payload (Controller):
Field: | CMD STATUS | REG ADDR | DATA... |
size:  |     8b     |   32b    |  8b*    |

Register Write HCI command complete event payload (Controller):
Field: | CMD_STATUS |
size:  |     8b     |

Since this payload is HCI encapsulated, Little Endian byte order is
used.

Write/Read Example:

If we write 0x0000002a at address 0x00008c04, with opcode_write 0xfc5d,
The resulting transaction is (btmon trace):

< HCI Command (0x3f|0x005d) plen 10 [hci0]
        04 8c 00 00 02 04 2a 00 00 00
> HCI Event (0x0e) plen 4
      Unknown (0x3f|0x005d) ncmd 1
        00

Then, if we read the same register with opcode_read 0xfc5e:

< HCI Command (0x3f|0x005e) plen 6 [hci0]
        04 8c 00 00 02 04
> HCI Event (0x0e) plen 12 [hci0]
      Unknown (0x3f|0x005e) ncmd 1
        00 04 8c 00 00 2a 00 00 00

Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-03 19:03:15 +02:00
Jarkko Nikula e98d6d6203 Bluetooth: hci_bcm: Do not test ACPI companion in bcm_acpi_probe()
This device has always ACPI companion because driver supports only ACPI
enumeration. Therefore there is no need to test it in bcm_acpi_probe() and
we can pass it directly to acpi_dev_get_resources() (which will return
-EINVAL in case of NULL argument is passed).

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-01 10:03:38 +02:00
Jarkko Nikula 4d1c455802 Bluetooth: hci_bcm: Remove needless looking code
Tree wide grep for "hci_bcm" doesn't reveal there is any code registering
this platform device and "struct acpi_device_id" use for passing the
platform data looks a debug/test code leftover to me.

I'm assuming this driver effectively supports only ACPI enumeration and
thus test for ACPI_HANDLE() and platform data can be removed.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-01 10:03:37 +02:00
Jarkko Nikula 5fbae60d43 Bluetooth: hci_bcm: Remove needless acpi_match_device() call
There is no need to call acpi_match_device() in driver's probe path and
verify does it find a match to given ACPI _HIDs in .acpi_match_table as
driver/platform/acpi core code has found the match prior calling the probe.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-01 10:03:37 +02:00
Jarkko Nikula 5be00284dc Bluetooth: hci_bcm: Handle possible error from acpi_dev_get_resources()
Driver doesn't handle possible error from acpi_dev_get_resources(). Test it
and return the error code in case of error.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-01 10:03:37 +02:00
Jarkko Nikula 09dbf1b784 Bluetooth: hci_bcm: Add missing acpi_dev_free_resource_list()
Caller of acpi_dev_get_resources() should free the constructed resource
list by calling the acpi_dev_free_resource_list() in order to avoid memory
leak.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-01 10:03:37 +02:00
Jarkko Nikula 23270e160d Bluetooth: hci_intel: Cleanup the device probe code
There is some unneeded code in "hci_intel" probing. First
acpi_match_device() call is needless as driver/platform/acpi core code has
already done the matching before calling the probe and the driver does not
use the returned pointer to matching _HID other than checking is it NULL.

Then tree wide grep for "hci_intel" doesn't reveal that there is any code
registering this platform device so it looks this device is always backed
with ACPI companion so also ACPI_HANDLE() test can be removed.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-01 08:55:42 +02:00
Prasanna Karthik 4a2fa2b8a8 Bluetooth: hci_h5: clean up hci_h5 code
This patch fixes checkpatch warnings:
- Comparison to NULL could be re-written
- no space required after a cast

Signed-off-by: Prasanna Karthik <mkarthi3@visteon.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-30 16:12:17 +02:00
Prasanna Karthik 239ede3c02 Bluetooth: btuart_cs: remove obsolete header
Use <linux/io.h> instead of <asm/io.h>, fixes checkpatch
Warning;

Signed-off-by: Prasanna Karthik <mkarthi3@visteon.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-30 15:26:12 +02:00
Prasanna Karthik a913718812 Bluetooth: hci_qca: Changed unsigned long to bool
'retransmit' being set in HCI_IBS_TX_WAKING case, using bool would be
efficient. Initialize local bool to false.

Signed-off-by: Prasanna Karthik <mkarthi3@visteon.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-28 13:06:13 +02:00
Prasanna Karthik 1f438c6138 Bluetooth: btmrvl: Comparison to NULL re-written
NOT NULL comparison modified to be readable, reported
by checkpatch.

Signed-off-by: Prasanna Karthik <mkarthi3@visteon.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-25 21:39:04 +02:00
Prasanna Karthik 05bd7762fa Bluetooth: btuart_cs: Comparison to NULL re-written
NOT NULL comparison modified to be readable, reported
by checkpatch.

Signed-off-by: Prasanna Karthik <mkarthi3@visteon.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-25 16:32:12 +02:00
Prasanna Karthik 7a1dc788e5 Bluetooth: bt3c_cs: Comparison to NULL re-written
NOT NULL comparison modified to be readable, reported
by checkpatch.

Signed-off-by: Prasanna Karthik <mkarthi3@visteon.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-25 16:31:36 +02:00
Prasanna Karthik 54b5b34ede Bluetooth: bluecard: Comparison to NULL could be re-written
replaced 'not null' comparison that is readable, reported by checkpatch.

Signed-off-by: Prasanna Karthik <mkarthi3@visteon.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-25 10:19:03 +02:00
Frederic Danis e88ab30d36 Bluetooth: hci_bcm: Add suspend/resume runtime PM functions
Adds autosuspend runtime functionality to BCM UART driver.
Autosuspend is enabled at end of bcm_setup.

bcm_device_lock is used for system sleep functions as they can be
called at any time.
bcm_device_lock is not held for runtime suspend functions as this
is only enabled as long as platform device is opened.

Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-24 16:25:44 +02:00
Frederic Danis 7649faff1c Bluetooth: Remove useless rx_lock spinlock
rx_lock spinlock is only used in hci_uart_tty_receive() which is the
receive_buf ldisc callback.

hci_uart_tty_receive() is protected from re-entrance by its only
caller (flush_to_ldisc() in drivers/tty/tty_buffer.c) which held a
mutex (buf->lock) for this section.
This lock allows "safe use of the line discipline's receive_buf()
method by excluding the buffer work and any pending flush from using
the flip buffer." (comments from tty_buffer_lock_exclusive() in
drivers/tty/tty_buffer.c)

So, no need to double protect this resource with rx_lock.

Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-24 16:25:44 +02:00
Frederic Danis b7a622a249 Bluetooth: hci_bcm: Prepare PM runtime support
Change some CONFIG_PM_SLEEP to CONFIG_PM as hu and is_suspended parameters
will be used during PM runtime callbacks.

Add bcm_suspend_device() and bcm_resume_device() which performs link
management for PM callbacks.
These functions will be used for runtime management.

Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-24 16:25:44 +02:00
Frederic Danis 5cebdfea32 Bluetooth: hci_bcm: Fix IRQ polarity for T100
ACPI table for BCM2E39 of T100TA is not correct.
Set correct irq_polarity for this device.

Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-24 16:25:44 +02:00
Amitkumar Karwar f0ef67485f Bluetooth: btmrvl: add sd8997 chipset support
This patch adds support for Marvell's new chipset SD8997.
Register offsets and supported feature flags are updated.

Signed-off-by: Zhaoyang Liu <liuzy@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22 11:51:24 +02:00
Amitkumar Karwar 53d6cfa581 Bluetooth: btmrvl: remove extra space in cast
Coding style fix, extra spaces are removed to make casting
consistent.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22 11:51:24 +02:00