Commit Graph

30 Commits

Author SHA1 Message Date
Jiri Olsa 5500fa5119 ftrace, perf: Add filter support for function trace event
Adding support to filter function trace event via perf
interface. It is now possible to use filter interface
in the perf tool like:

  perf record -e ftrace:function --filter="(ip == mm_*)" ls

The filter syntax is restricted to the the 'ip' field only,
and following operators are accepted '==' '!=' '||', ending
up with the filter strings like:

  ip == f1[, ]f2 ... || ip != f3[, ]f4 ...

with comma ',' or space ' ' as a function separator. If the
space ' ' is used as a separator, the right side of the
assignment needs to be enclosed in double quotes '"', e.g.:

  perf record -e ftrace:function --filter '(ip == do_execve,sys_*,ext*)' ls
  perf record -e ftrace:function --filter '(ip == "do_execve,sys_*,ext*")' ls
  perf record -e ftrace:function --filter '(ip == "do_execve sys_* ext*")' ls

The '==' operator adds trace filter with same effect as would
be added via set_ftrace_filter file.

The '!=' operator adds trace filter with same effect as would
be added via set_ftrace_notrace file.

The right side of the '!=', '==' operators is list of functions
or regexp. to be added to filter separated by space.

The '||' operator is used for connecting multiple filter definitions
together. It is possible to have more than one '==' and '!='
operators within one filter string.

Link: http://lkml.kernel.org/r/1329317514-8131-8-git-send-email-jolsa@redhat.com

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-21 11:08:30 -05:00
Jiri Olsa ced39002f5 ftrace, perf: Add support to use function tracepoint in perf
Adding perf registration support for the ftrace function event,
so it is now possible to register it via perf interface.

The perf_event struct statically contains ftrace_ops as a handle
for function tracer. The function tracer is registered/unregistered
in open/close actions.

To be efficient, we enable/disable ftrace_ops each time the traced
process is scheduled in/out (via TRACE_REG_PERF_(ADD|DELL) handlers).
This way tracing is enabled only when the process is running.
Intentionally using this way instead of the event's hw state
PERF_HES_STOPPED, which would not disable the ftrace_ops.

It is now possible to use function trace within perf commands
like:

  perf record -e ftrace:function ls
  perf stat -e ftrace:function ls

Allowed only for root.

Link: http://lkml.kernel.org/r/1329317514-8131-6-git-send-email-jolsa@redhat.com

Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-21 11:08:27 -05:00
Jiri Olsa 489c75c3b3 ftrace, perf: Add add/del tracepoint perf registration actions
Adding TRACE_REG_PERF_ADD and TRACE_REG_PERF_DEL to handle
perf event schedule in/out actions.

The add action is invoked for when the perf event is scheduled in,
while the del action is invoked when the event is scheduled out.

Link: http://lkml.kernel.org/r/1329317514-8131-4-git-send-email-jolsa@redhat.com

Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-21 11:08:25 -05:00
Jiri Olsa ceec0b6fc7 ftrace, perf: Add open/close tracepoint perf registration actions
Adding TRACE_REG_PERF_OPEN and TRACE_REG_PERF_CLOSE to differentiate
register/unregister from open/close actions.

The register/unregister actions are invoked for the first/last
tracepoint user when opening/closing the event.

The open/close actions are invoked for each tracepoint user when
opening/closing the event.

Link: http://lkml.kernel.org/r/1329317514-8131-3-git-send-email-jolsa@redhat.com

Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-21 11:08:24 -05:00
Frederic Weisbecker 61c32659b1 tracing: New flag to allow non privileged users to use a trace event
This adds a new trace event internal flag that allows them to be
used in perf by non privileged users in case of task bound tracing.

This is desired for syscalls tracepoint because they don't leak
global system informations, like some other tracepoints.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Jason Baron <jbaron@redhat.com>
2010-11-18 14:37:40 +01:00
Peter Zijlstra a4eaf7f146 perf: Rework the PMU methods
Replace pmu::{enable,disable,start,stop,unthrottle} with
pmu::{add,del,start,stop}, all of which take a flags argument.

The new interface extends the capability to stop a counter while
keeping it scheduled on the PMU. We replace the throttled state with
the generic stopped state.

This also allows us to efficiently stop/start counters over certain
code paths (like IRQ handlers).

It also allows scheduling a counter without it starting, allowing for
a generic frozen state (useful for rotating stopped counters).

The stopped state is implemented in two different ways, depending on
how the architecture implemented the throttled state:

 1) We disable the counter:
    a) the pmu has per-counter enable bits, we flip that
    b) we program a NOP event, preserving the counter state

 2) We store the counter state and ignore all read/overflow events

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-09 20:46:30 +02:00
Ingo Molnar 2aa61274ef Merge branch 'perf/urgent' into perf/core
Merge reason: Pick up pending fixes before applying dependent new changes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-09 20:40:08 +02:00
Li Zefan 9cb627d5f3 perf, trace: Fix module leak
Commit 1c024eca (perf, trace: Optimize tracepoints by using
per-tracepoint-per-cpu hlist to track events) caused a module
refcount leak.

Reported-And-Tested-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4C7E1F12.8030304@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-09 20:38:51 +02:00
Namhyung Kim 6016ee13db perf, tracing: add missing __percpu markups
ftrace_event_call->perf_events, perf_trace_buf,
fgraph_data->cpu_data and some local variables are percpu pointers
missing __percpu markups. Add them.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1281498479-28551-1-git-send-email-namhyung@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-08-19 01:33:05 +02:00
Frederic Weisbecker 7ae07ea3a4 perf: Humanize the number of contexts
Instead of hardcoding the number of contexts for the recursions
barriers, define a cpp constant to make the code more
self-explanatory.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
2010-08-19 01:32:53 +02:00
Frederic Weisbecker 669336e4cf perf: Use tracepoint_synchronize_unregister() to flush any pending tracepoint call
We use synchronize_sched() to ensure a tracepoint won't be called
while/after we release the perf buffers it references.

But the tracepoint API has its own API for that:
tracepoint_synchronize_unregister(). Use it instead as it's
self-explanatory and eases maintainance.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
2010-08-02 01:30:56 +02:00
Steven Rostedt a1d0ce8213 tracing: Use class->reg() for all registering of events
Because kprobes and syscalls need special processing to register
events, the class->reg() method was created to handle the differences.

But instead of creating a default ->reg for perf and ftrace events,
the code was scattered with:

	if (class->reg)
		class->reg();
	else
		default_reg();

This is messy and can also lead to bugs.

This patch cleans up this code and creates a default reg() entry for
the events allowing for the code to directly call the class->reg()
without the condition.

Reported-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-06-28 21:13:14 -04:00
Thomas Gleixner f384c954c9 Merge branch 'linus' into perf/core
Reason: Further changes conflict with upstream fixes

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-06-28 22:33:24 +02:00
Steven Rostedt a8fb260805 perf/tracing: Fix regression of perf losing kprobe events
With the addition of the code to shrink the kernel tracepoint
infrastructure, we lost kprobes being traced by perf. The reason
is that I tested if the "tp_event->class->perf_probe" existed before
enabling it. This prevents "ftrace only" events (like the function
trace events) from being enabled by perf.

Unfortunately, kprobe events do not use perf_probe. This causes
kprobes to be missed by perf. To fix this, we add the test to
see if "tp_event->class->reg" exists as well as perf_probe.

Normal trace events have only "perf_probe" but no "reg" function,
and kprobes and syscalls have the "reg" but no "perf_probe".
The ftrace unique events do not have either, so this is a valid
test. If a kprobe or syscall is not to be probed by perf, the
"reg" function is called anyway, and will return a failure and
prevent perf from probing it.

Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-06-10 20:56:54 -04:00
Ingo Molnar c726b61c6a Merge branch 'perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into perf/core 2010-06-09 18:55:57 +02:00
Frederic Weisbecker b0f82b81fe perf: Drop the skip argument from perf_arch_fetch_regs_caller
Drop this argument now that we always want to rewind only to the
state of the first caller.
It means frame pointers are not necessary anymore to reliably get
the source of an event. But this also means we need this helper
to be a macro now, as an inline function is not an option since
we need to know when to provide a default implentation.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: David Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-06-08 23:31:27 +02:00
Peter Zijlstra 2e97942fe5 perf_events, trace: Fix perf_trace_destroy(), mutex went missing
Steve spotted I forgot to do the destroy under event_mutex.

Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1274451913.1674.1707.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-31 08:46:09 +02:00
Peter Zijlstra 3771f07711 perf_events, trace: Fix probe unregister race
tracepoint_probe_unregister() does not synchronize against the probe
callbacks, so do that explicitly. This properly serializes the callbacks
and the free of the data used therein.

Also, use this_cpu_ptr() where possible.

Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1274438476.1674.1702.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-31 08:46:09 +02:00
Peter Zijlstra 87f44bbc24 perf, trace: Fix !x86 build bug
Patch b7e2ecef92 (perf, trace: Optimize tracepoints by removing
IRQ-disable from perf/tracepoint interaction) made the
unfortunate mistake of assuming the world is x86 only, correct
this.

The problem was that perf_fetch_caller_regs() did
local_save_flags() into regs->flags, and I re-used that to
remove another local_save_flags(), forgetting !x86 doesn't have
regs->flags.

Do the reverse, remove the local_save_flags() from
perf_fetch_caller_regs() and let the ftrace site do the
local_save_flags() instead.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Cc: acme@redhat.com
Cc: efault@gmx.de
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
LKML-Reference: <1274778175.5882.623.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-25 11:28:49 +02:00
Steven Rostedt ff5f149b6a Merge branch 'perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip into trace/tip/tracing/core-7
Conflicts:
	include/linux/ftrace_event.h
	include/trace/ftrace.h
	kernel/trace/trace_event_perf.c
	kernel/trace/trace_kprobe.c
	kernel/trace/trace_syscalls.c

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-21 11:49:57 -04:00
Peter Zijlstra 1c024eca51 perf, trace: Optimize tracepoints by using per-tracepoint-per-cpu hlist to track events
Avoid the swevent hash-table by using per-tracepoint
hlists.

Also, avoid conditionals on the fast path by ordering
with probe unregister so that we should never get on
the callback path without the data being there.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100521090710.473188012@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-21 11:37:56 +02:00
Peter Zijlstra b7e2ecef92 perf, trace: Optimize tracepoints by removing IRQ-disable from perf/tracepoint interaction
Improves performance.

Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1274259525.5605.10352.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-21 11:37:56 +02:00
Peter Zijlstra 4f41c013f5 perf/ftrace: Optimize perf/tracepoint interaction for single events
When we've got but a single event per tracepoint
there is no reason to try and multiplex it so don't.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-18 18:35:46 +02:00
Steven Rostedt 32c0edaeaa tracing: Remove duplicate id information in event structure
Now that the trace_event structure is embedded in the ftrace_event_call
structure, there is no need for the ftrace_event_call id field.
The id field is the same as the trace_event type field.

Removing the id and re-arranging the structure brings down the tracepoint
footprint by another 5K.

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4895024	1023812	 861512	6780348	 6775bc	vmlinux.print
4894944	1018052	 861512	6774508	 675eec	vmlinux.id

Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-14 14:33:15 -04:00
Steven Rostedt 2239291aeb tracing: Remove per event trace registering
This patch removes the register functions of TRACE_EVENT() to enable
and disable tracepoints. The registering of a event is now down
directly in the trace_events.c file. The tracepoint_probe_register()
is now called directly.

The prototypes are no longer type checked, but this should not be
an issue since the tracepoints are created automatically by the
macros. If a prototype is incorrect in the TRACE_EVENT() macro, then
other macros will catch it.

The trace_event_class structure now holds the probes to be called
by the callbacks. This removes needing to have each event have
a separate pointer for the probe.

To handle kprobes and syscalls, since they register probes in a
different manner, a "reg" field is added to the ftrace_event_class
structure. If the "reg" field is assigned, then it will be called for
enabling and disabling of the probe for either ftrace or perf. To let
the reg function know what is happening, a new enum (trace_reg) is
created that has the type of control that is needed.

With this new rework, the 82 kernel events and 618 syscall events
has their footprint dramatically lowered:

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4914025	1088868	 861512	6864405	 68be15	vmlinux.class
4918492	1084612	 861512	6864616	 68bee8	vmlinux.tracepoint
4900252	1057412	 861512	6819176	 680d68	vmlinux.regs

The size went from 6863829 to 6819176, that's a total of 44K
in savings. With tracepoints being continuously added, this is
critical that the footprint becomes minimal.

v5: Added #ifdef CONFIG_PERF_EVENTS around a reference to perf
    specific structure in trace_events.c.

v4: Fixed trace self tests to check probe because regfunc no longer
    exists.

v3: Updated to handle void *data in beginning of probe parameters.
    Also added the tracepoint: check_trace_callback_type_##call().

v2: Changed the callback probes to pass void * and typecast the
    value within the function.

Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-14 14:19:14 -04:00
Frederic Weisbecker eb1e79611c perf: Correctly align perf event tracing buffer
The trace event buffer used by perf to record raw sample events
is typed as an array of char and may then not be aligned to 8
by alloc_percpu().

But we need it to be aligned to 8 in sparc64 because we cast
this buffer into a random structure type built by the TRACE_EVENT()
macro to store the traces. So if a random 64 bits field is accessed
inside, it may be not under an expected good alignment.

Use an array of long instead to force the appropriate alignment, and
perform a compile time check to ensure the size in byte of the buffer
is a multiple of sizeof(long) so that its actual size doesn't get
shrinked under us.

This fixes unaligned accesses reported while using perf lock
in sparc 64.

Suggested-by: David Miller <davem@davemloft.net>
Suggested-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
2010-04-01 08:26:30 +02:00
Linus Torvalds f82c37e7bb Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (35 commits)
  perf: Fix unexported generic perf_arch_fetch_caller_regs
  perf record: Don't try to find buildids in a zero sized file
  perf: export perf_trace_regs and perf_arch_fetch_caller_regs
  perf, x86: Fix hw_perf_enable() event assignment
  perf, ppc: Fix compile error due to new cpu notifiers
  perf: Make the install relative to DESTDIR if specified
  kprobes: Calculate the index correctly when freeing the out-of-line execution slot
  perf tools: Fix sparse CPU numbering related bugs
  perf_event: Fix oops triggered by cpu offline/online
  perf: Drop the obsolete profile naming for trace events
  perf: Take a hot regs snapshot for trace events
  perf: Introduce new perf_fetch_caller_regs() for hot regs snapshot
  perf/x86-64: Use frame pointer to walk on irq and process stacks
  lockdep: Move lock events under lockdep recursion protection
  perf report: Print the map table just after samples for which no map was found
  perf report: Add multiple event support
  perf session: Change perf_session post processing functions to take histogram tree
  perf session: Add storage for seperating event types in report
  perf session: Change add_hist_entry to take the tree root instead of session
  perf record: Add ID and to recorded event data when recording multiple events
  ...
2010-03-18 16:52:46 -07:00
Frederic Weisbecker dcd5c1662d perf: Fix unexported generic perf_arch_fetch_caller_regs
perf_arch_fetch_caller_regs() is exported for the overriden x86
version, but not for the generic weak version.

As a general rule, weak functions should not have their symbol
exported in the same file they are defined.

So let's export it on trace_event_perf.c as it is used by trace
events only.

This fixes:

	ERROR: ".perf_arch_fetch_caller_regs" [fs/xfs/xfs.ko] undefined!
	ERROR: ".perf_arch_fetch_caller_regs" [arch/powerpc/platforms/cell/spufs/spufs.ko] undefined!

-v2: And also only build it if trace events are enabled.
-v3: Fix changelog mistake

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1268697902-9518-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-17 12:26:49 +01:00
Xiao Guangrong 639fe4b12f perf: export perf_trace_regs and perf_arch_fetch_caller_regs
Export perf_trace_regs and perf_arch_fetch_caller_regs since module will
use these.

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
[ use EXPORT_PER_CPU_SYMBOL_GPL() ]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4B989C1B.2090407@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 15:21:29 +01:00
Frederic Weisbecker 97d5a22005 perf: Drop the obsolete profile naming for trace events
Drop the obsolete "profile" naming used by perf for trace events.
Perf can now do more than simple events counting, so generalize
the API naming.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
2010-03-10 14:47:18 +01:00