The following call chains indicate that chnl_net_open() is under
rtnl_lock protection as __dev_open() is protected by rtnl_lock.
So if __dev_get_by_index() instead of dev_get_by_index() is used
to find interface handler in it, this would help us avoid to change
interface reference counter.
__dev_open()
chnl_net_open()
Cc: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The following call chains indicate that batadv_is_on_batman_iface()
is always under rtnl_lock protection as call_netdevice_notifier()
is protected by rtnl_lock. So if __dev_get_by_index() rather than
dev_get_by_index() is used to find interface handler in it, this
would help us avoid to change interface reference counter.
call_netdevice_notifier()
batadv_hard_if_event()
batadv_hardif_add_interface()
batadv_is_valid_iface()
batadv_is_on_batman_iface()
Cc: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The following call chain we can identify that dn_cache_getroute() is
protected under rtnl_lock. So if we use __dev_get_by_index() instead
of dev_get_by_index() to find interface handlers in it, this would help
us avoid to change interface reference counter.
rtnetlink_rcv()
rtnl_lock()
netlink_rcv_skb()
dn_cache_getroute()
rtnl_unlock()
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The following call chain indicates that dcb_doit() is protected
under rtnl_lock. So if we use __dev_get_by_name() instead of
dev_get_by_name() to find interface handlers in it, this would
help us avoid to change interface reference counter.
rtnetlink_rcv()
rtnl_lock()
netlink_rcv_skb()
dcb_doit()
rtnl_unlock()
Cc: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change move anycast_src_echo_reply sysctl with other ipv6 sysctls.
Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Francois-Xavier Le Bail <fx.lebail@yahoo.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
It confuses Smatch when we check "sinit" for NULL and then non-NULL and
that causes a false positive warning later.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bob Falken reported that after 4G packets, multicast forwarding stopped
working. This was because of a rule reference counter overflow which
freed the rule as soon as the overflow happend.
This patch solves this by adding the FIB_LOOKUP_NOREF flag to
fib_rules_lookup calls. This is safe even from non-rcu locked sections
as in this case the flag only implies not taking a reference to the rule,
which we don't need at all.
Rules only hold references to the namespace, which are guaranteed to be
available during the call of the non-rcu protected function reg_vif_xmit
because of the interface reference which itself holds a reference to
the net namespace.
Fixes: f0ad0860d0 ("ipv4: ipmr: support multiple tables")
Fixes: d1db275dd3 ("ipv6: ip6mr: support multiple tables")
Reported-by: Bob Falken <NetFestivalHaveFun@gmx.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: Julian Anastasov <ja@ssi.bg>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix a memory leak in the ieee802154_add_iface() error handling path.
Detected by Coverity: CID 710490.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes the net_random and net_srandom macros and replaces
them with direct calls to the prandom ones. As new commits only seem to
use prandom_u32 there is no use to keep them around.
This change makes it easier to grep for users of prandom_u32.
Signed-off-by: Aruna-Hewapathirane <aruna.hewapathirane@gmail.com>
Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Suggested-by: Simon Schneider <simon-schneider@gmx.net>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We still need this notifier even when we don't config
PROC_FS.
It should be rare to have a kernel without PROC_FS,
so just for completeness.
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The existing net/netif_rx and net/netif_receive_skb trace events
provide little information about the skb, nor do they indicate how it
entered the stack.
Add trace events at entry of each of the exported functions, including
most fields that are likely to be interesting for debugging driver
datapath behaviour. Split netif_rx() and netif_receive_skb() so that
internal calls are not traced.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The existing net/net_dev_xmit trace event provides little information
about the skb that has been passed to the driver, and it is not
simple to add more since the skb may already have been freed at
the point the event is emitted.
Add a separate trace event before the skb is passed to the driver,
including most fields that are likely to be interesting for debugging
driver datapath behaviour.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a function to set up the partial checksum offset for IP
packets (and optionally re-calculate the pseudo-header checksum) into the
core network code.
The implementation was previously private and duplicated between xen-netback
and xen-netfront, however it is not xen-specific and is potentially useful
to any network driver.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 1d49144c0a ("netfilter: nf_tables: add "inet" table for
IPv4/IPv6") allows creation of non-IPV6 enabled .config files that
will fail to configure/link as follows:
warning: (NF_TABLES_INET) selects NF_TABLES_IPV6 which has unmet direct dependencies (NET && INET && IPV6 && NETFILTER && NF_TABLES)
warning: (NF_TABLES_INET) selects NF_TABLES_IPV6 which has unmet direct dependencies (NET && INET && IPV6 && NETFILTER && NF_TABLES)
warning: (NF_TABLES_INET) selects NF_TABLES_IPV6 which has unmet direct dependencies (NET && INET && IPV6 && NETFILTER && NF_TABLES)
net/built-in.o: In function `nft_reject_eval':
nft_reject.c:(.text+0x651e8): undefined reference to `nf_ip6_checksum'
nft_reject.c:(.text+0x65270): undefined reference to `ip6_route_output'
nft_reject.c:(.text+0x656c4): undefined reference to `ip6_dst_hoplimit'
make: *** [vmlinux] Error 1
Since the feature is to allow for a mixed IPV4 and IPV6 table, it
seems sensible to make it depend on IPV6.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The check that makes sure that we have enough memory allocated to read
in the entire header of the message in question is currently busted.
It compares front_len of the incoming message with iov_len field of
ceph_msg::front structure, which is used primarily to indicate the
amount of data already read in, and not the size of the allocated
buffer. Under certain conditions (e.g. a short read from a socket
followed by that socket's shutdown and owning ceph_connection reset)
this results in a warning similar to
[85688.975866] libceph: get_reply front 198 > preallocated 122 (4#0)
and, through another bug, leads to forever hung tasks and forced
reboots. Fix this by comparing front_len with front_alloc_len field of
struct ceph_msg, which stores the actual size of the buffer.
Fixes: http://tracker.ceph.com/issues/5425
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Rename front local variable to front_len in get_reply() to make its
purpose more clear.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Rename front_max field of struct ceph_msg to front_alloc_len to make
its purpose more clear.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
And it can become static.
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
net/xfrm/xfrm_policy.c
Steffen Klassert says:
====================
This pull request has a merge conflict between commits be7928d20b
("net: xfrm: xfrm_policy: fix inline not at beginning of declaration") and
da7c224b1b ("net: xfrm: xfrm_policy: silence compiler warning") from
the net-next tree and commit 2f3ea9a95c ("xfrm: checkpatch erros with
inline keyword position") from the ipsec-next tree.
The version from net-next can be used, like it is done in linux-next.
1) Checkpatch cleanups, from Weilong Chen.
2) Fix lockdep complaints when pktgen is used with IPsec,
from Fan Du.
3) Update pktgen to allow any combination of IPsec transport/tunnel mode
and AH/ESP/IPcomp type, from Fan Du.
4) Make pktgen_dst_metrics static, Fengguang Wu.
5) Compile fix for pktgen when CONFIG_XFRM is not set,
from Fan Du.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix inet_diag_dump_icsk() to reflect the fact that both TCP_TIME_WAIT
and TCP_FIN_WAIT2 connections are represented by inet_timewait_sock
(not just TIME_WAIT), and for such sockets the tw_substate field holds
the real state, which can be either TCP_TIME_WAIT or TCP_FIN_WAIT2.
This brings the inet_diag state-matching code in line with the field
it uses to populate idiag_state. This is also analogous to the info
exported in /proc/net/tcp, where get_tcp4_sock() exports sk->sk_state
and get_timewait4_sock() exports tw->tw_substate.
Before fixing this, (a) neither "ss -nemoi" nor "ss -nemoi state
fin-wait-2" would return a socket in TCP_FIN_WAIT2; and (b) "ss -nemoi
state time-wait" would also return sockets in state TCP_FIN_WAIT2.
This is an old bug that predates 05dbc7b ("tcp/dccp: remove twchain").
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- drop dependency against CRC16
- move to new release version
- add size check at compile time for packet structs
- update copyright years in every file
- implement new bonding/interface alternation feature
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=BKos
-----END PGP SIGNATURE-----
Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-merge
Included changes:
- drop dependency against CRC16
- move to new release version
- add size check at compile time for packet structs
- update copyright years in every file
- implement new bonding/interface alternation feature
Signed-off-by: David S. Miller <davem@davemloft.net>
Right now the sessionid value in the kernel is a combination of u32,
int, and unsigned int. Just use unsigned int throughout.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Currently, after changing the MTU for a device, dev_set_mtu() calls
NETDEV_CHANGEMTU notification, however doesn't verify it's return code -
which can be NOTIFY_BAD - i.e. some of the net notifier blocks refused this
change, and continues nevertheless.
To fix this, verify the return code, and if it's an error - then revert the
MTU to the original one, notify again and pass the error code.
CC: Jiri Pirko <jiri@resnulli.us>
CC: "David S. Miller" <davem@davemloft.net>
CC: Eric Dumazet <edumazet@google.com>
CC: Alexander Duyck <alexander.h.duyck@intel.com>
CC: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Reviewed-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid needless export of local functions
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the GRE header length calculation in gre_gso_segment().
Switch to an approach that is simpler, faster, and more general. The
new approach will continue to be correct even if we add support for
the optional variable-length routing info that may be present in a GRE
header.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: H.K. Jerry Chu <hkchu@google.com>
Cc: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is not necessary at all.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tp->root is a void* pointer, no need to cast it.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcf_match_indev() is called in fast path, it is not wise to
search for a netdev by ifindex and then compare by its name,
just compare the ifindex.
Also, dev->name could be changed by user-space, therefore
the match would be always fail, but dev->ifindex could
be consistent.
BTW, this will also save some bytes from the core struct of u32.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It will be needed by the next patch.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Refactor tcf_add_notify() and factor out tcf_del_notify().
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no need to store the index separatedly
since tcf_hashinfo is allocated statically too.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The REGULATORY_CUSTOM_REG can be used during early init with
the goal of overriding the wiphy's default regulatory settings
in case the alpha2 of the device is not known. In the case that
the alpha2 becomes known lets avoid having drivers having to
clear the REGULATORY_CUSTOM_REG flag by doing it for them
when regulatory_hint() is used.
Cc: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
GRO layer has a limit of 8 flows being held in GRO list,
for performance reason.
When a packet comes for a flow not yet in the list,
and list is full, we immediately give it to upper
stacks, lowering aggregation performance.
With TSO auto sizing and FQ packet scheduler, this situation
happens more often.
This patch changes strategy to simply evict the oldest flow of
the list. This works better because of the nature of packet
trains for which GRO is efficient. This also has the effect
of lowering the GRO latency if many flows are competing.
Tested :
Used a 40Gbps NIC, with 4 RX queues, and 200 concurrent TCP_STREAM
netperf.
Before patch, aggregate rate is 11Gbps (while a single flow can reach
30Gbps)
After patch, line rate is reached.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jerry Chu <hkchu@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following sparse warning:
net/ipv4/gre_offload.c:253:5: warning:
symbol 'gre_gro_complete' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
It includes:
* A new NFC driver for Marvell's 8897, and a few NCI fixes and
improvements needed to support this chipset.
* An LLCP fix for how we were setting the default MIU on a p2p link. If
there is no explicit MIU extension announced at connection time, we
must use the default one and not the one announced at LLCP link
establishement time.
* A pn544 EEPROM config update. Some of the currently EEPROM configured
values are overwriting the firmware ones while other should not be set
by the driver itself.
* Some NFC digital stack fixes and improvements. Asynchronous functions
are better documented, RF technologies and CRC functions are set upon
PSL_REQ reception, and a few minor bugs are fixed.
* Minor and miscelaneous pn533, mei_phy and port100 fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=ydBy
-----END PGP SIGNATURE-----
Merge tag 'nfc-next-3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next
Samuel Ortiz <sameo@linux.intel.com> says:
"This is the first NFC pull request for 3.14
It includes:
* A new NFC driver for Marvell's 8897, and a few NCI fixes and
improvements needed to support this chipset.
* An LLCP fix for how we were setting the default MIU on a p2p link. If
there is no explicit MIU extension announced at connection time, we
must use the default one and not the one announced at LLCP link
establishement time.
* A pn544 EEPROM config update. Some of the currently EEPROM configured
values are overwriting the firmware ones while other should not be set
by the driver itself.
* Some NFC digital stack fixes and improvements. Asynchronous functions
are better documented, RF technologies and CRC functions are set upon
PSL_REQ reception, and a few minor bugs are fixed.
* Minor and miscelaneous pn533, mei_phy and port100 fixes."
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This new ip_no_pmtu_disc mode only allowes fragmentation-needed errors
to be honored by protocols which do more stringent validation on the
ICMP's packet payload. This knob is useful for people who e.g. want to
run an unmodified DNS server in a namespace where they need to use pmtu
for TCP connections (as they are used for zone transfers or fallback
for requests) but don't want to use possibly spoofed UDP pmtu information.
Currently the whitelisted protocols are TCP, SCTP and DCCP as they check
if the returned packet is in the window or if the association is valid.
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: John Heffner <johnwheffner@gmail.com>
Suggested-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the IPv6 forwarding path we are only concerend about the outgoing
interface MTU, but also respect locked MTUs on routes. Tunnel provider
or IPSEC already have to recheck and if needed send PtB notifications
to the sending host in case the data does not fit into the packet with
added headers (we only know the final header sizes there, while also
using path MTU information).
The reason for this change is, that path MTU information can be injected
into the kernel via e.g. icmp_err protocol handler without verification
of local sockets. As such, this could cause the IPv6 forwarding path to
wrongfully emit Packet-too-Big errors and drop IPv6 packets.
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: John Heffner <johnwheffner@gmail.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
While forwarding we should not use the protocol path mtu to calculate
the mtu for a forwarded packet but instead use the interface mtu.
We mark forwarded skbs in ip_forward with IPSKB_FORWARDED, which was
introduced for multicast forwarding. But as it does not conflict with
our usage in unicast code path it is perfect for reuse.
I moved the functions ip_sk_accept_pmtu, ip_sk_use_pmtu and ip_skb_dst_mtu
along with the new ip_dst_mtu_maybe_forward to net/ip.h to fix circular
dependencies because of IPSKB_FORWARDED.
Because someone might have written a software which does probe
destinations manually and expects the kernel to honour those path mtus
I introduced a new per-namespace "ip_forward_use_pmtu" knob so someone
can disable this new behaviour. We also still use mtus which are locked on a
route for forwarding.
The reason for this change is, that path mtus information can be injected
into the kernel via e.g. icmp_err protocol handler without verification
of local sockets. As such, this could cause the IPv4 forwarding path to
wrongfully emit fragmentation needed notifications or start to fragment
packets along a path.
Tunnel and ipsec output paths clear IPCB again, thus IPSKB_FORWARDED
won't be set and further fragmentation logic will use the path mtu to
determine the fragmentation size. They also recheck packet size with
help of path mtu discovery and report appropriate errors.
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: John Heffner <johnwheffner@gmail.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is to be compatible with the use of "get_time" (i.e. default
time unit in us) in iproute2 patch for HHF as requested by Stephen.
Signed-off-by: Terry Lam <vtlam@google.com>
Acked-by: Nandita Dukkipati <nanditad@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The only valid use of preempt_enable_no_resched() is if the very next
line is schedule() or if we know preemption cannot actually be enabled
by that statement due to known more preempt_count 'refs'.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: rjw@rjwysocki.net
Cc: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: rui.zhang@intel.com
Cc: jacob.jun.pan@linux.intel.com
Cc: Mike Galbraith <bitbucket@online.de>
Cc: hpa@zytor.com
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: lenb@kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20131119151338.GF3694@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The crc16 functionality is not used anymore, therefore
we can safely remove the dependency in the Kbuild file.
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
With unrolling the batadv_header into the respective structures, the
offsetof checks are now useless. Instead, add build checks for all
packet types which go over the wire to avoid problems with wrong sizes
or compatibility issues on some architectures which don't use every day.
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Return at the end of void functions is not needed.
Since most of the void functions in the code do not do so,
make all the others consistent by removing the useless
returns. Actually all the functions to be "fixed" are in
network-coding.h only.
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Show tables for the multi interface operation. Originator tables
are added per hard interface.
This patch also changes the API by adding the interface to the
bat_orig_print() parameters.
Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
To show information per interface, add a debugfs hardif structure
similar to the system in sysfs. Hard interface folders will be created
in "$debugfs/batman-adv/". Files are not yet added.
Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
With the new interface alternating, the first hop may send packets
in a round robin fashion to it's neighbors because it has multiple
valid routes built by the multi interface optimization. This patch
enables the feature if bonding is selected. Note that unlike the
bonding implemented before, this version is much simpler and may
even enable multi path routing to a certain degree.
Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
The current OGM sending an aggregation functionality decides on
which interfaces a packet should be sent when it parses the forward
packet struct. However, with the network wide multi interface
optimization the outgoing interface is decided by the OGM processing
function.
This is reflected by moving the decision in the OGM processing function
and add the outgoing interface in the forwarding packet struct. This
practically implies that an OGM may be added multiple times (once per
outgoing interface), and this also affects aggregation which needs to
consider the outgoing interface as well.
Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
If the same interface is used for sending and receiving, there might be
throughput degradation on half-duplex interfaces such as WiFi. Add a
penalty if the same interface is used to reflect this problem in the
metric. At the same time, change the hop penalty from 30 to 15 so there
will be no change for single wifi mesh network. the effective hop
penalty will stay at 30 due to the new wifi penalty for these networks.
Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
For the network wide multi interface optimization there are different
routers for each outgoing interface (outgoing from the OGM perspective,
incoming for payload traffic). To reflect this, change the router and
associated data to a list of routers.
While at it, rename batadv_orig_node_get_router() to
batadv_orig_router_get() to follow the new naming scheme.
Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
For the network wide multi interface optimization it is required to save
metrics per outgoing interface in one neighbor. Therefore a new type is
introduced to keep interface-specific information. This also requires
some changes in access and list management.
The compare and equiv_or_better API calls are changed to take the
outgoing interface into consideration.
Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Remove bonding and interface alternating code - it will be replaced
by a new, network-wide multi interface optimization which enables
both bonding and interface alternating in a better way.
Keep the sysfs and find router function though, this will be needed
later.
Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
- substitute FSF address with URL
- deselect current bat-GW when GW-client mode gets deactivated
- send every DHCP packet using bat-unicast messages when GW-client mode is
enabled
- implement the Extended Isolation mechanism (it is an enhancement of the
already existing batman-AP-isolation). This mechanism allows the user to drop
packets exchanged by selected clients by using netfilter marks.
- fix typ0 in header guard
- minor code cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=6EjB
-----END PGP SIGNATURE-----
Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-merge
Included changes:
- substitute FSF address with URL
- deselect current bat-GW when GW-client mode gets deactivated
- send every DHCP packet using bat-unicast messages when GW-client mode is
enabled
- implement the Extended Isolation mechanism (it is an enhancement of the
already existing batman-AP-isolation). This mechanism allows the user to drop
packets exchanged by selected clients by using netfilter marks.
- fix typ0 in header guard
- minor code cleanups
Signed-off-by: David S. Miller <davem@davemloft.net>
We want to be able to get/del tcp-metrics based on the src IP. This
patch adds the necessary parsing of the netlink attribute and if the
source address is set, it will match on this one too.
Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
As we now can have multiple entries per destination-IP, the "ip
tcp_metrics delete address ADDRESS" command deletes all of them.
Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a new netlink attribute for the source-IP and appends it
to the netlink reply. Now, iproute2 can have access to the source-IP.
Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
We add the source-address to the tcp-metrics, so that different metrics
will be used per source/destination-pair. We use the destination-hash to
store the metric inside the hash-table. That way, deleting and dumping
via "ip tcp_metrics" is easy.
Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
As we will add also the source-address, we rename all accesses to the
tcp-metrics address to use "daddr".
Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
John W. Linville says:
====================
Please pull these updates for the 3.14 stream!
For the mac80211 bits, Johannes says:
"Felix adds some helper functions for P2P NoA software tracking, Joe
fixes alignment (but as this apparently never caused issues I didn't
send it to 3.13), Kyeyoon/Jouni add QoS-mapping support (a Hotspot 2.0
feature), Weilong fixed a bunch of checkpatch errors and I get to play
fire-fighter or so and clean up other people's locking issues. I also
added nl80211 vendor-specific events, as we'd discussed at the wireless
summit."
For the iwlwifi bits, Emmanuel says:
"I have here a rework of the interrupt handling to meet RT kernel
requirements - basically we don't take any lock in the primary interrupt
handler. This gave me a good reason to clean things up a bit on the way.
There is also a fix of the QoS mapping along with a few workarounds for
hardware / firmware issues that are hard to hit.
Three fixes suggested by static analyzers, and other various stuff.
Most importantly, I update the Copyright note to include the new year."
For the bluetooth bits, Gustavo says:
"More patches to 3.14. The bulk of changes here is the 6LoWPAN support for
Bluetooth LE Devices. The commits that touches net/ieee802154/ are already
acked by David Miller. Other than that we have some RFCOMM fixes and
improvements plus fixes and clean ups all over the tree."
Beyond that, ath9k, brcmfmac, mwifiex, and wil6210 get their usual
level of attention. The wl1251 driver gets a number of updates,
and there are a handful of other bits here and there.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
This batch contains one single patch with the l2tp match
for xtables, from James Chapman.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the tx queue were selected implicitly in ndo_dfwd_start_xmit(). The
will cause several issues:
- NETIF_F_LLTX were removed for macvlan, so txq lock were done for macvlan
instead of lower device which misses the necessary txq synchronization for
lower device such as txq stopping or frozen required by dev watchdog or
control path.
- dev_hard_start_xmit() was called with NULL txq which bypasses the net device
watchdog.
- dev_hard_start_xmit() does not check txq everywhere which will lead a crash
when tso is disabled for lower device.
Fix this by explicitly introducing a new param for .ndo_select_queue() for just
selecting queues in the case of l2 forwarding offload. netdev_pick_tx() was also
extended to accept this parameter and dev_queue_xmit_accel() was used to do l2
forwarding transmission.
With this fixes, NETIF_F_LLTX could be preserved for macvlan and there's no need
to check txq against NULL in dev_hard_start_xmit(). Also there's no need to keep
a dedicated ndo_dfwd_start_xmit() and we can just reuse the code of
dev_queue_xmit() to do the transmission.
In the future, it was also required for macvtap l2 forwarding support since it
provides a necessary synchronization method.
Cc: John Fastabend <john.r.fastabend@intel.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: e1000-devel@lists.sourceforge.net
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John W. Linville says:
====================
For the mac80211 bits, Johannes says:
"I have a fix from Javier for mac80211_hwsim when used with wmediumd
userspace, and a fix from Felix for buffering in AP mode."
For the NFC bits, Samuel says:
"This pull request only contains one fix for a regression introduced with
commit e29a9e2ae1. Without this fix, we can not establish a p2p link
in target mode. Only initiator mode works."
For the iwlwifi bits, Emmanuel says:
"It only includes new device IDs so it's not vital. If you have a pull
request to net.git anyway, I'd happy to have this in."
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When fetching the policy attribute, the byteorder conversion was
missing, breaking the chain policy setting.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If a uAPSD service period ends with an MMPDU, we currently just
send that MMPDU, but it obviously won't get the EOSP bit set as
it doesn't have a QoS header. This contradicts the standard, so
add a QoS-nulldata frame after the MMPDU to properly terminate
the service period with a frame that has EOSP set.
Also fix a bug wrt. the TID for the MMPDU, it shouldn't be set
to 0 unconditionally but use the actual TID that was assigned.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The temporary TX info flags need to be cleared if the frame will
be processed through the TX handlers again, otherwise it can get
messed up. This fixes a bug that happened when an aggregation
session was stopped while the station was sleeping - some frames
might get transmitted marked as aggregation erroneously without
this fix.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When a response for PS-Poll or a uAPSD trigger frame is sent, the
more-data bit should be set according to 802.11-2012 11.2.1.5 h),
meaning that it should indicate more data on the relevant ACs
(delivery-enabled or nondelivery-enabled for uAPSD or PS-Poll.)
In, for example, the following scenario:
* 1 frame on VO queue (either in driver or in mac80211)
* at least 1 frame on VI queue (in the driver)
* both VO/VI are delivery-enabled
* uAPSD trigger frame received
The more-data flag to the driver would not be set, even though
it should be.
While fixing this, I noticed that we should really release frames
from multiple ACs where there's data buffered in the driver for
the corresponding TIDs.
To address all this, restructure the code a bit to consider all
ACs if we only release driver frames or only buffered frames.
This also addresses the more-data bug described above as now the
TIDs will all be marked as released, so the driver will have to
check the number of frames.
While at it, clarify some code and comments and remove the found
variable, replacing it with the appropriate sw/hw release check.
Reported-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Using ffs() for the PS-Poll release TID is wrong, it will cause
frames to be released in order 0 1 2 3 4 5 6 7 instead of the
correct 7 6 5 4 3 0 2 1. Fix this by adding a new function that
implements "highest priority TID" properly.
Reported-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
0-DAY kernel build testing backend reported below error:
All error/warnings:
net/core/pktgen.c: In function 'pktgen_if_write':
>> >> net/core/pktgen.c:1487:10: error: 'struct pktgen_dev' has no member named 'spi'
>> >> net/core/pktgen.c:1488:43: error: 'struct pktgen_dev' has no member named 'spi'
Fix this by encapuslating the code with CONFIG_XFRM.
Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Fan Du <fan.du@windriver.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In the past the IFA_PERMANENT flag indicated, that the valid and preferred
lifetime where ignored. Since change fad8da3e08 ("ipv6 addrconf: fix
preferred lifetime state-changing behavior while valid_lft is infinity")
we honour at least the preferred lifetime on those addresses. As such
the valid lifetime gets recalculated and updated to 0.
If loopback address is added manually this problem does not occur.
Also if NetworkManager manages IPv6, those addresses will get added via
inet6_rtm_newaddr and thus will have a correct lifetime, too.
Reported-by: François-Xavier Le Bail <fx.lebail@yahoo.com>
Reported-by: Damien Wyart <damien.wyart@gmail.com>
Fixes: fad8da3e08 ("ipv6 addrconf: fix preferred lifetime state-changing behavior while valid_lft is infinity")
Cc: Yasushi Asano <yasushi.asano@jp.fujitsu.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
nf_tables updates for net-next
The following patchset contains the following nf_tables updates,
mostly updates from Patrick McHardy, they are:
* Add the "inet" table and filter chain type for this new netfilter
family: NFPROTO_INET. This special table/chain allows IPv4 and IPv6
rules, this should help to simplify the burden in the administration
of dual stack firewalls. This also includes several patches to prepare
the infrastructure for this new table and a new meta extension to
match the layer 3 and 4 protocol numbers, from Patrick McHardy.
* Load both IPv4 and IPv6 conntrack modules in nft_ct if the rule is used
in NFPROTO_INET, as we don't certainly know which one would be used,
also from Patrick McHardy.
* Do not allow to delete a table that contains sets, otherwise these
sets become orphan, from Patrick McHardy.
* Hold a reference to the corresponding nf_tables family module when
creating a table of that family type, to avoid the module deletion
when in use, from Patrick McHardy.
* Update chain counters before setting the chain policy to ensure that
we don't leave the chain in inconsistent state in case of errors (aka.
restore chain atomicity). This also fixes a possible leak if it fails
to allocate the chain counters if no counters are passed to be restored,
from Patrick McHardy.
* Don't check for overflows in the table counter if we are just renaming
a chain, from Patrick McHardy.
* Replay the netlink request after dropping the nfnl lock to load the
module that supports provides a chain type, from Patrick.
* Fix chain type module references, from Patrick.
* Several cleanups, function renames, constification and code
refactorizations also from Patrick McHardy.
* Add support to set the connmark, this can be used to set it based on
the meta mark (similar feature to -j CONNMARK --restore), from
Kristian Evensen.
* A couple of fixes to the recently added meta/set support and nft_reject,
and fix missing chain type unregistration if we fail to register our
the family table/filter chain type, from myself.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce an xtables add-on for matching L2TP packets. Supports L2TPv2
and L2TPv3 over IPv4 and IPv6. As well as filtering on L2TP tunnel-id
and session-id, the filtering decision can also include the L2TP
packet type (control or data), protocol version (2 or 3) and
encapsulation type (UDP or IP).
The most common use for this will likely be to filter L2TP data
packets of individual L2TP tunnels or sessions. While a u32 match can
be used, the L2TP protocol headers are such that field offsets differ
depending on bits set in the header, making rules for matching generic
L2TP connections cumbersome. This match extension takes care of all
that.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fixes the following sparse warning:
net/ipv4/ip_tunnel.c:116:18: warning:
symbol 'tunnel_dst_check' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
memory allocated by kmem_cache_alloc() should be freed using
kmem_cache_free(), not kfree().
Fixes: e298e50570 ('openvswitch: Per cpu flow stats.')
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We don't encode argument types into function names and since besides
nft_do_chain() there are only AF-specific versions, there is no risk
of confusion.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We currently leak the set memory when deleting a table that still has
sets in it. Return EBUSY when attempting to delete a table with sets.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The table refers to data of the AF module, so we need to make sure the
module isn't unloaded while the table exists.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Simplifies error handling. Additionally use the correct type u32 for the
host byte order flags value.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Minor nf_chain_type cleanups:
- reorder struct to plug a hoe
- rename struct module member to "owner" for consistency
- rename nf_hookfn array to "hooks" for consistency
- reorder initializers for better readability
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
To avoid races, we need to replay to request after dropping the nfnl_mutex
to auto-load the chain type module.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In some cases we neither take a reference to the AF info nor to the
chain type, allowing the module to be unloaded while in use.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The chain type module reference handling makes no sense at all: we take
a reference immediately when the module is registered, preventing the
module from ever being unloaded.
Fix by taking a reference when we're actually creating a chain of the
chain type and release the reference when destroying the chain.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The table use counter is only increased for new chains, so move the check
to the correct position.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Chain counter validation is performed after the chain policy has
potentially been changed. Move counter validation/setting before
changing of the chain policy to fix this.
Additionally fix a memory leak if chain counter allocation fails
for new chains, remove an unnecessary free_percpu() and move
counter allocation for new chains
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Currently nf_tables_newchain() atomicity is broken because of having
validation of some netlink attributes performed after changing attributes
of the chain. The chain policy is (currently) fine, but split it up as
preparation for the following fixes and to avoid future mistakes.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We have to validate that the input register is in the range of
allowed registers, otherwise we can take a incorrect register
value as input that may lead us to a crash.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch adds kernel support for setting properties of tracked
connections. Currently, only connmark is supported. One use-case
for this feature is to provide the same functionality as
-j CONNMARK --save-mark in iptables.
Some restructuring was needed to implement the set op. The new
structure follows that of nft_meta.
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Block setting the wrong values through iwconfig retry
command. Add sanity checking before sending the retry
limit to the driver.
Signed-off-by: Ujjal Roy <royujjal@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a utility function to get the number of channels supported by
the device, and update the places in the code that need this data.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
[replace another occurrence in libertas, fix kernel-doc, fix bugs]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains three Netfilter updates, they are:
* Fix wrong usage of skb_header_pointer in the DCCP protocol helper that
has been there for quite some time. It was resulting in copying the dccp
header to a pointer allocated in the stack. Fortunately, this pointer
provides room for the dccp header is 4 bytes long, so no crashes have been
reported so far. From Daniel Borkmann.
* Use format string to print in the invocation of nf_log_packet(), again
in the DCCP helper. Also from Daniel Borkmann.
* Revert "netfilter: avoid get_random_bytes call" as prandom32 does not
guarantee enough entropy when being calling this at boot time, that may
happen when reloading the rule.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If a broadcast packet is coming from a client marked as
isolated, then mark the skb using the isolation mark so
that netfilter (or any other application) can recognise
them.
The mark is written in the skb based on the mask value:
only bits set in the mask are substitued by those in the
mark value
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
The AP isolation status may be evaluated in different spots.
Create an helper function to avoid code duplication.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Change the AP isolation mechanism to not only "isolate" WIFI
clients but also all those marked with the more generic
"isolation flag" (BATADV_TT_CLIENT_ISOLA).
The result is that when AP isolation is on any unicast
packet originated by an "isolated" client and directed to
another "isolated" client is dropped at the source node.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Print the new BATADV_TT_CLIENT_ISOLA flag properly in the
Local and Global Translation Table output.
The character 'I' is used in the flags column to indicate
that the entry is marked as isolated.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
A client sending packets which mark matches the value
configured via sysfs has to be identified as isolated using
the TT_CLIENT_ISOLA flag.
The match is mask based, meaning that only bits set in the
mask are compared with those in the mark value.
If the configured mask is equal to 0 no operation is
performed.
Such flag is then advertised within the classic client
announcement mechanism.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
This attribute can be used to set and read the value and the
mask of the skb mark which will be used to classify the
source non-mesh client as ISOLATED. In this way a client can
be advertised as such and the mark can potentially be
restored at the receiving node before delivering the skb.
This can be helpful for creating network wide netfilter
policies.
This sysfs file expects a string of the shape "$mark/$mask".
Where $mark has to be a 32-bit number in any base, while
$mask must be a 32bit mask expressed in hex base. Only bits
in $mark covered by the bitmask are really stored.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
In different situations it is possible that the DHCP server
or client uses broadcast Ethernet frames to send messages
to each other. The GW component in batman-adv takes care of
using bat-unicast packets to bring broadcast DHCP
Discover/Requests to the "best" server.
On the way back the DHCP server usually sends unicasts,
but upon client request it may decide to use broadcasts as
well.
This patch improves the GW component so that it now snoops
and sends as unicast all the DHCP packets, no matter if they
were generated by a DHCP server or client.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Remove parenthesis around return expression as suggested by
checkpatch.
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
The function batadv_gw_deselect() is actually not deselecting
anything. It is just informing the GW code to perform a
re-election procedure when possible.
The current gateway is not being touched at all and therefore
the name of this function is rather misleading.
Rename it to batadv_gw_reselect() to batadv_gw_reselect()
to make its behaviour easier to grasp.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
When switching from gw_mode client to either off or server
the current selected gateway has to be deselected.
In this way when client mode is enabled again a gateway
re-election is forced and a GW_ADD event is consequently
sent.
The current behaviour instead is to keep the current gateway
leading to no GW_ADD event when gw_mode client is selected
for a second time
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
As suggested by checkpatch, remove all the references to the
FSF address since the kernel already has one reference in
its documentation.
In this way it is easier to update it in case of future
changes.
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
If possible, operations like ntohs/ntohl should not be
performed too often. Use a variable to locally store the
converted value and then use it.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
It only contains one fix for a regression introduced with commit
e29a9e2ae1. Without this fix, we can not establish a p2p link in
target mode. Only initiator mode works.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=YkKJ
-----END PGP SIGNATURE-----
Merge tag 'nfc-fixes-3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-fixes
Samuel Ortiz <sameo@linux.intel.com> says:
"This is the first NFC fixes pull request for 3.13.
It only contains one fix for a regression introduced with commit
e29a9e2ae1. Without this fix, we can not establish a p2p link in
target mode. Only initiator mode works."
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Fix below compiler warning:
net/xfrm/xfrm_policy.c:1644:12: warning: ‘xfrm_dst_alloc_copy’ defined but not used [-Wunused-function]
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a link is created we delay the start event by launching it
to be executed later in a tasklet. As we hold all the
necessary locks at the moment of creation, and there is no risk
of deadlock or contention, this delay serves no purpose in the
current code.
We remove this obsolete indirection step, and the associated function
link_start(). At the same time, we rename the function tipc_link_stop()
to the more appropriate tipc_link_purge_queues().
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, only 'bearer_lock' is used to protect struct link_req in
the function disc_timeout(). This is unsafe, since the member fields
'num_nodes' and 'timer_intv' might be accessed by below three different
threads simultaneously, none of them grabbing bearer_lock in the
critical region:
link_activate()
tipc_bearer_add_dest()
tipc_disc_add_dest()
req->num_nodes++;
tipc_link_reset()
tipc_bearer_remove_dest()
tipc_disc_remove_dest()
req->num_nodes--
disc_update()
read req->num_nodes
write req->timer_intv
disc_timeout()
read req->num_nodes
read/write req->timer_intv
Without lock protection, the only symptom of a race is that discovery
messages occasionally may not be sent out. This is not fatal, since such
messages are best-effort anyway. On the other hand, since discovery
messages are not time critical, adding a protecting lock brings no
serious overhead either. So we add a new, dedicated spinlock in
order to guarantee absolute data consistency in link_req objects.
This also helps reduce the overall role of the bearer_lock, which
we want to remove completely in a later commit series.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The flag 'has_redundant_link' is defined only in RESET and ACTIVATE
protocol messages. Due to an ambiguity in the protocol specification it
is currently also transferred in STATE messages. Its value is used to
initialize a link state variable, 'permit_changeover', which is used
to inhibit futile link failover attempts when it is known that the
peer node has no working links at the moment, although the local node
may still think it has one.
The fact that 'has_redundant_link' incorrectly is read from STATE
messages has the effect that 'permit_changeover' sometimes gets a wrong
value, and permanently blocks any links from being re-established. Such
failures can only occur in in dual-link systems, and are extremely rare.
This bug seems to have always been present in the code.
Furthermore, since commit b4b5610223
("tipc: Ensure both nodes recognize loss of contact between them"),
the 'permit_changeover' field serves no purpose any more. The task of
enforcing 'lost contact' cycles at both peer endpoints is now taken
by a new mechanism, using the flags WAIT_NODE_DOWN and WAIT_PEER_DOWN
in struct tipc_node to abort unnecessary failover attempts.
We therefore remove the 'has_redundant_link' flag from STATE messages,
as well as the now redundant 'permit_changeover' variable.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The functionality related to link addition and failover is unnecessarily
hard to understand and maintain. We try to improve this by renaming
some of the functions, at the same time adding or improving the
explanatory comments around them. Names such as "tipc_rcv()" etc. also
align better with what is used in other networking components.
The changes in this commit are purely cosmetic, no functional changes
are made.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
The following patchset contains two patches:
* fix the IRC NAT helper which was broken when adding (incomplete) IPv6
support, from Daniel Borkmann.
* Refine the previous bugtrap that Jesper added to catch problems for the
usage of the sequence adjustment extension in IPVs in Dec 16th, it may
spam messages in case of finding a real bug.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix three warnings related to:
net/xfrm/xfrm_policy.c:1644:1: warning: 'inline' is not at beginning of declaration [-Wold-style-declaration]
net/xfrm/xfrm_policy.c:1656:1: warning: 'inline' is not at beginning of declaration [-Wold-style-declaration]
net/xfrm/xfrm_policy.c:1668:1: warning: 'inline' is not at beginning of declaration [-Wold-style-declaration]
Just removing the inline keyword is sufficient as the compiler will
decide on its own about inlining or not.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ct expression can currently not be used in the inet family since
we don't have a conntrack module for NFPROTO_INET, so
nf_ct_l3proto_try_module_get() fails. Add some manual handling to
load the modules for both NFPROTO_IPV4 and NFPROTO_IPV6 if the
ct expression is used in the inet family.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
For L3-proto independant rules we need to get at the L4 protocol value
directly. Add it to the nft_pktinfo struct and use the meta expression
to retrieve it.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Needed by multi-family tables to distinguish IPv4 and IPv6 packets.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch adds a new table family and a new filter chain that you can
use to attach IPv4 and IPv6 rules. This should help to simplify
rule-set maintainance in dual-stack setups.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add support to register chains to multiple hooks for different address
families for mixed IPv4/IPv6 tables.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Multi-family tables need the AF from the hook ops. Add a pointer to the
hook ops and replace usage of the hooknum member in struct nft_pktinfo.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Currently the AF-specific hook functions override the chain-type specific
hook functions. That doesn't make too much sense since the chain types
are a special case of the AF-specific hooks.
Make the AF-specific hook functions the default and make the optional
chain type hooks override them.
As a side effect, the necessary code restructuring reduces the code size,
f.i. in case of nf_tables_ipv4.o:
nf_tables_ipv4_init_net | -24
nft_do_chain_ipv4 | -113
2 functions changed, 137 bytes removed, diff: -137
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
net/netfilter/nft_reject.c: In function 'nft_reject_eval':
net/netfilter/nft_reject.c:37:14: warning: unused variable 'net' [-Wunused-variable]
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch built on top of Commit 299603e837
("net-gro: Prepare GRO stack for the upcoming tunneling support") to add
the support of the standard GRE (RFC1701/RFC2784/RFC2890) to the GRO
stack. It also serves as an example for supporting other encapsulation
protocols in the GRO stack in the future.
The patch supports version 0 and all the flags (key, csum, seq#) but
will flush any pkt with the S (seq#) flag. This is because the S flag
is not support by GSO, and a GRO pkt may end up in the forwarding path,
thus requiring GSO support to break it up correctly.
Currently the "packet_offload" structure only contains L3 (ETH_P_IP/
ETH_P_IPV6) GRO offload support so the encapped pkts are limited to
IP pkts (i.e., w/o L2 hdr). But support for other protocol type can
be easily added, so is the support for GRE variations like NVGRE.
The patch also support csum offload. Specifically if the csum flag is on
and the h/w is capable of checksumming the payload (CHECKSUM_COMPLETE),
the code will take advantage of the csum computed by the h/w when
validating the GRE csum.
Note that commit 60769a5dcd "ipv4: gre:
add GRO capability" already introduces GRO capability to IPv4 GRE
tunnels, using the gro_cells infrastructure. But GRO is done after
GRE hdr has been removed (i.e., decapped). The following patch applies
GRO when pkts first come in (before hitting the GRE tunnel code). There
is some performance advantage for applying GRO as early as possible.
Also this approach is transparent to other subsystem like Open vSwitch
where GRE decap is handled outside of the IP stack hence making it
harder for the gro_cells stuff to apply. On the other hand, some NICs
are still not capable of hashing on the inner hdr of a GRE pkt (RSS).
In that case the GRO processing of pkts from the same remote host will
all happen on the same CPU and the performance may be suboptimal.
I'm including some rough preliminary performance numbers below. Note
that the performance will be highly dependent on traffic load, mix as
usual. Moreover it also depends on NIC offload features hence the
following is by no means a comprehesive study. Local testing and tuning
will be needed to decide the best setting.
All tests spawned 50 copies of netperf TCP_STREAM and ran for 30 secs.
(super_netperf 50 -H 192.168.1.18 -l 30)
An IP GRE tunnel with only the key flag on (e.g., ip tunnel add gre1
mode gre local 10.246.17.18 remote 10.246.17.17 ttl 255 key 123)
is configured.
The GRO support for pkts AFTER decap are controlled through the device
feature of the GRE device (e.g., ethtool -K gre1 gro on/off).
1.1 ethtool -K gre1 gro off; ethtool -K eth0 gro off
thruput: 9.16Gbps
CPU utilization: 19%
1.2 ethtool -K gre1 gro on; ethtool -K eth0 gro off
thruput: 5.9Gbps
CPU utilization: 15%
1.3 ethtool -K gre1 gro off; ethtool -K eth0 gro on
thruput: 9.26Gbps
CPU utilization: 12-13%
1.4 ethtool -K gre1 gro on; ethtool -K eth0 gro on
thruput: 9.26Gbps
CPU utilization: 10%
The following tests were performed on a different NIC that is capable of
csum offload. I.e., the h/w is capable of computing IP payload csum
(CHECKSUM_COMPLETE).
2.1 ethtool -K gre1 gro on (hence will use gro_cells)
2.1.1 ethtool -K eth0 gro off; csum offload disabled
thruput: 8.53Gbps
CPU utilization: 9%
2.1.2 ethtool -K eth0 gro off; csum offload enabled
thruput: 8.97Gbps
CPU utilization: 7-8%
2.1.3 ethtool -K eth0 gro on; csum offload disabled
thruput: 8.83Gbps
CPU utilization: 5-6%
2.1.4 ethtool -K eth0 gro on; csum offload enabled
thruput: 8.98Gbps
CPU utilization: 5%
2.2 ethtool -K gre1 gro off
2.2.1 ethtool -K eth0 gro off; csum offload disabled
thruput: 5.93Gbps
CPU utilization: 9%
2.2.2 ethtool -K eth0 gro off; csum offload enabled
thruput: 5.62Gbps
CPU utilization: 8%
2.2.3 ethtool -K eth0 gro on; csum offload disabled
thruput: 7.69Gbps
CPU utilization: 8%
2.2.4 ethtool -K eth0 gro on; csum offload enabled
thruput: 8.96Gbps
CPU utilization: 5-6%
Signed-off-by: H.K. Jerry Chu <hkchu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are many cases where this feature does not improve performance or even
reduces it.
For example, here are the results from tests that I've run using 3.12.6 on one
Intel Xeon W3565 and one i7 920 connected by ixgbe adapters. The results are
from the Xeon, but they're similar on the i7. All numbers report the
mean±stddev over 10 runs of 10s.
1) latency tests similar to what is described in "c6e1a0d net: Allow no-cache
copy from user on transmit"
There is no statistically significant difference between tx-nocache-copy
on/off.
nic irqs spread out (one queue per cpu)
200x netperf -r 1400,1
tx-nocache-copy off
692000±1000 tps
50/90/95/99% latency (us): 275±2/643.8±0.4/799±1/2474.4±0.3
tx-nocache-copy on
693000±1000 tps
50/90/95/99% latency (us): 274±1/644.1±0.7/800±2/2474.5±0.7
200x netperf -r 14000,14000
tx-nocache-copy off
86450±80 tps
50/90/95/99% latency (us): 334.37±0.02/838±1/2100±20/3990±40
tx-nocache-copy on
86110±60 tps
50/90/95/99% latency (us): 334.28±0.01/837±2/2110±20/3990±20
2) single stream throughput tests
tx-nocache-copy leads to higher service demand
throughput cpu0 cpu1 demand
(Gb/s) (Gcycle) (Gcycle) (cycle/B)
nic irqs and netperf on cpu0 (1x netperf -T0,0 -t omni -- -d send)
tx-nocache-copy off 9402±5 9.4±0.2 0.80±0.01
tx-nocache-copy on 9403±3 9.85±0.04 0.838±0.004
nic irqs on cpu0, netperf on cpu1 (1x netperf -T1,1 -t omni -- -d send)
tx-nocache-copy off 9401±5 5.83±0.03 5.0±0.1 0.923±0.007
tx-nocache-copy on 9404±2 5.74±0.03 5.523±0.009 0.958±0.002
As a second example, here are some results from Eric Dumazet with latest
net-next.
tx-nocache-copy also leads to higher service demand
(cpu is Intel(R) Xeon(R) CPU X5660 @ 2.80GHz)
lpq83:~# ./ethtool -K eth0 tx-nocache-copy on
lpq83:~# perf stat ./netperf -H lpq84 -c
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to lpq84.prod.google.com () port 0 AF_INET
Recv Send Send Utilization Service Demand
Socket Socket Message Elapsed Send Recv Send Recv
Size Size Size Time Throughput local remote local remote
bytes bytes bytes secs. 10^6bits/s % S % U us/KB us/KB
87380 16384 16384 10.00 9407.44 2.50 -1.00 0.522 -1.000
Performance counter stats for './netperf -H lpq84 -c':
4282.648396 task-clock # 0.423 CPUs utilized
9,348 context-switches # 0.002 M/sec
88 CPU-migrations # 0.021 K/sec
355 page-faults # 0.083 K/sec
11,812,797,651 cycles # 2.758 GHz [82.79%]
9,020,522,817 stalled-cycles-frontend # 76.36% frontend cycles idle [82.54%]
4,579,889,681 stalled-cycles-backend # 38.77% backend cycles idle [67.33%]
6,053,172,792 instructions # 0.51 insns per cycle
# 1.49 stalled cycles per insn [83.64%]
597,275,583 branches # 139.464 M/sec [83.70%]
8,960,541 branch-misses # 1.50% of all branches [83.65%]
10.128990264 seconds time elapsed
lpq83:~# ./ethtool -K eth0 tx-nocache-copy off
lpq83:~# perf stat ./netperf -H lpq84 -c
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to lpq84.prod.google.com () port 0 AF_INET
Recv Send Send Utilization Service Demand
Socket Socket Message Elapsed Send Recv Send Recv
Size Size Size Time Throughput local remote local remote
bytes bytes bytes secs. 10^6bits/s % S % U us/KB us/KB
87380 16384 16384 10.00 9412.45 2.15 -1.00 0.449 -1.000
Performance counter stats for './netperf -H lpq84 -c':
2847.375441 task-clock # 0.281 CPUs utilized
11,632 context-switches # 0.004 M/sec
49 CPU-migrations # 0.017 K/sec
354 page-faults # 0.124 K/sec
7,646,889,749 cycles # 2.686 GHz [83.34%]
6,115,050,032 stalled-cycles-frontend # 79.97% frontend cycles idle [83.31%]
1,726,460,071 stalled-cycles-backend # 22.58% backend cycles idle [66.55%]
2,079,702,453 instructions # 0.27 insns per cycle
# 2.94 stalled cycles per insn [83.22%]
363,773,213 branches # 127.757 M/sec [83.29%]
4,242,732 branch-misses # 1.17% of all branches [83.51%]
10.128449949 seconds time elapsed
CC: Tom Herbert <therbert@google.com>
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we pull a received packet from a link's 'deferred packets' queue
for processing, its 'next' pointer is not cleared, and still refers to
the next packet in that queue, if any. This is incorrect, but caused
no harm before commit 40ba3cdf54 ("tipc:
message reassembly using fragment chain") was introduced. After that
commit, it may sometimes lead to the following oops:
general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC
Modules linked in: tipc
CPU: 4 PID: 0 Comm: swapper/4 Tainted: G W 3.13.0-rc2+ #6
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
task: ffff880017af4880 ti: ffff880017aee000 task.ti: ffff880017aee000
RIP: 0010:[<ffffffff81710694>] [<ffffffff81710694>] skb_try_coalesce+0x44/0x3d0
RSP: 0018:ffff880016603a78 EFLAGS: 00010212
RAX: 6b6b6b6bd6d6d6d6 RBX: ffff880013106ac0 RCX: ffff880016603ad0
RDX: ffff880016603ad7 RSI: ffff88001223ed00 RDI: ffff880013106ac0
RBP: ffff880016603ab8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: ffff88001223ed00
R13: ffff880016603ad0 R14: 000000000000058c R15: ffff880012297650
FS: 0000000000000000(0000) GS:ffff880016600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 000000000805b000 CR3: 0000000011f5d000 CR4: 00000000000006e0
Stack:
ffff880016603a88 ffffffff810a38ed ffff880016603aa8 ffff88001223ed00
0000000000000001 ffff880012297648 ffff880016603b68 ffff880012297650
ffff880016603b08 ffffffffa0006c51 ffff880016603b08 00ffffffa00005fc
Call Trace:
<IRQ>
[<ffffffff810a38ed>] ? trace_hardirqs_on+0xd/0x10
[<ffffffffa0006c51>] tipc_link_recv_fragment+0xd1/0x1b0 [tipc]
[<ffffffffa0007214>] tipc_recv_msg+0x4e4/0x920 [tipc]
[<ffffffffa00016f0>] ? tipc_l2_rcv_msg+0x40/0x250 [tipc]
[<ffffffffa000177c>] tipc_l2_rcv_msg+0xcc/0x250 [tipc]
[<ffffffffa00016f0>] ? tipc_l2_rcv_msg+0x40/0x250 [tipc]
[<ffffffff8171e65b>] __netif_receive_skb_core+0x80b/0xd00
[<ffffffff8171df94>] ? __netif_receive_skb_core+0x144/0xd00
[<ffffffff8171eb76>] __netif_receive_skb+0x26/0x70
[<ffffffff8171ed6d>] netif_receive_skb+0x2d/0x200
[<ffffffff8171fe70>] napi_gro_receive+0xb0/0x130
[<ffffffff815647c2>] e1000_clean_rx_irq+0x2c2/0x530
[<ffffffff81565986>] e1000_clean+0x266/0x9c0
[<ffffffff81985f7b>] ? notifier_call_chain+0x2b/0x160
[<ffffffff8171f971>] net_rx_action+0x141/0x310
[<ffffffff81051c1b>] __do_softirq+0xeb/0x480
[<ffffffff819817bb>] ? _raw_spin_unlock+0x2b/0x40
[<ffffffff810b8c42>] ? handle_fasteoi_irq+0x72/0x100
[<ffffffff81052346>] irq_exit+0x96/0xc0
[<ffffffff8198cbc3>] do_IRQ+0x63/0xe0
[<ffffffff81981def>] common_interrupt+0x6f/0x6f
<EOI>
This happens when the last fragment of a message has passed through the
the receiving link's 'deferred packets' queue, and at least one other
packet was added to that queue while it was there. After the fragment
chain with the complete message has been successfully delivered to the
receiving socket, it is released. Since 'next' pointer of the last
fragment in the released chain now is non-NULL, we get the crash shown
above.
We fix this by clearing the 'next' pointer of all received packets,
including those being pulled from the 'deferred' queue, before they
undergo any further processing.
Fixes: 40ba3cdf54 ("tipc: message reassembly using fragment chain")
Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
Reported-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When lo is brought up, new ifa is created. Then, devconf and neigh values
bitfield should be set so later changes of default values would not
affect lo values.
Note that the same behaviour is in ipv6. Also note that this is likely
not an issue in many distros (for example Fedora 19) because userspace
sets address to lo manually before bringing it up.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change allows to follow a recommandation of RFC4942.
- Add "anycast_src_echo_reply" sysctl to control the use of anycast addresses
as source addresses for ICMPv6 echo reply. This sysctl is false by default
to preserve existing behavior.
- Add inline check ipv6_anycast_destination().
- Use them in icmpv6_echo_reply().
Reference:
RFC4942 - IPv6 Transition/Coexistence Security Considerations
(http://tools.ietf.org/html/rfc4942#section-2.1.6)
2.1.6. Anycast Traffic Identification and Security
[...]
To avoid exposing knowledge about the internal structure of the
network, it is recommended that anycast servers now take advantage of
the ability to return responses with the anycast address as the
source address if possible.
Signed-off-by: Francois-Xavier Le Bail <fx.lebail@yahoo.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch sets the correct rf tech value and crc functions in target
mode when receiving a PSL_REQ, as done when receiving an ATR_REQ.
Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The curr_protocol field of nfc_digital_dev structure used to determine
if a target is currently active was set too soon, immediately when a
target is found. This is not good since there is no other way than
deactivate_target() to reset curr_protocol and if activate_target() is
not called, the target remains active and it's not possible to put the
device in poll mode anymore.
With this patch curr_protocol is set when nfc core activates a target,
puts a device up, or when an ATR_REQ is received in target mode.
Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Convert to the safer gpiod_* family of API functions.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In managed mode, we should not ask for OFF mode because the
power settings may still require DYNAMIC. In AP mode, this
should be allowed since the default settings is OFF and
AUTOMATIC is not allowed.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Using an int with 0/1 is not very common, make the function
return a bool instead with the same values (false/true).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
No need to assign the return value of prepare_for_handlers
to a variable if the only usage is to test it.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This patch fixed several typo in printk from various
part of kernel source.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch fixes peer address lookup for 6loWPAN over Bluetooth Low
Energy links.
ADDR_LE_DEV_PUBLIC, and ADDR_LE_DEV_RANDOM are the values allowed for
"dst_type" field in the hci_conn struct for LE links.
Signed-off-by: Claudio Takahasi <claudio.takahasi@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch fixes the Bluetooth Low Energy Address type checking when
setting Universal/Local bit for the 6loWPAN network device or for the
peer device connection.
ADDR_LE_DEV_PUBLIC or ADDR_LE_DEV_RANDOM are the values allowed for
"src_type" and "dst_type" in the hci_conn struct. The Bluetooth link
type can be obtainned reading the "type" field in the same struct.
Signed-off-by: Claudio Takahasi <claudio.takahasi@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
GRO/GSO layers can be enabled on a node, even if said
node is only forwarding packets.
This patch permits GSO (and upcoming GRO) support for GRE
encapsulated packets, even if the host has no GRE tunnel setup.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: H.K. Jerry Chu <hkchu@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesse Gross says:
====================
[GIT net-next] Open vSwitch
Open vSwitch changes for net-next/3.14. Highlights are:
* Performance improvements in the mechanism to get packets to userspace
using memory mapped netlink and skb zero copy where appropriate.
* Per-cpu flow stats in situations where flows are likely to be shared
across CPUs. Standard flow stats are used in other situations to save
memory and allocation time.
* A handful of code cleanups and rationalization.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This API can be used by drivers to send their custom
configuration using SET_CONFIG NCI command to the device.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Some drivers require special configuration while initializing.
This patch adds setup handler for this custom configuration.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Local general bytes returned by nfc_get_local_general_bytes()
are already in correct order. We don't need to reverse them.
Remove local_gb[] local array as it's not needed any more.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Several functions and datastructures could be local
Found with 'make namespacecheck'
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Jesse Gross <jesse@nicira.com>
The copy & csum optimization is no longer present with zerocopy
enabled. Compute the checksum in skb_gso_segment() directly by
dropping the HW CSUM capability from the features passed in.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Use of skb_zerocopy() can avoid the expensive call to memcpy()
when copying the packet data into the Netlink skb. Completes
checksum through skb_checksum_help() if not already done in
GSO segmentation.
Zerocopy is only performed if user space supported unaligned
Netlink messages. memory mapped netlink i/o is preferred over
zerocopy if it is set up.
Cost of upcall is significantly reduced from:
+ 7.48% vhost-8471 [k] memcpy
+ 5.57% ovs-vswitchd [k] memcpy
+ 2.81% vhost-8471 [k] csum_partial_copy_generic
to:
+ 5.72% ovs-vswitchd [k] memcpy
+ 3.32% vhost-5153 [k] memcpy
+ 0.68% vhost-5153 [k] skb_zerocopy
(megaflows disabled)
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Allows removing the net and dp_ifindex argument and simplify the
code.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Drop user features if an outdated user space instance that does not
understand the concept of user_features attempted to create a new
datapath.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Make the skb zerocopy logic written for nfnetlink queue available for
use by other modules.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Reviewed-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jesse Gross <jesse@nicira.com>
As we're only doing a kfree() anyway in the RCU callback, we can
simply use kfree_rcu, which does the same job, and remove the
function rcu_free_sw_flow_mask_cb() and rcu_free_acts_callback().
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
With mega flow implementation ovs flow can be shared between
multiple CPUs which makes stats updates highly contended
operation. This patch uses per-CPU stats in cases where a flow
is likely to be shared (if there is a wildcard in the 5-tuple
and therefore likely to be spread by RSS). In other situations,
it uses the current strategy, saving memory and allocation time.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
An insufficent ring frame size configuration can lead to an
unnecessary skb allocation for every Netlink message. Check frame
size before taking the queue lock and allocating the skb and
re-check with lock to be safe.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Reviewed-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Allocates a new sk_buff large enough to cover the specified payload
plus required Netlink headers. Will check receiving socket for
memory mapped i/o capability and use it if enabled. Will fall back
to non-mapped skb if message size exceeds the frame size of the ring.
Signed-of-by: Thomas Graf <tgraf@suug.ch>
Reviewed-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Flow lookup can happen either in packet processing context or userspace
context but it was annotated as requiring RCU read lock to be held. This
also allows OVS mutex to be held without causing warnings.
Reported-by: Justin Pettit <jpettit@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Reviewed-by: Thomas Graf <tgraf@redhat.com>
API changes only for code readability. No functional chnages.
This patch removes the underscored version. Added a new API
ovs_flow_tbl_lookup_stats() that returns the n_mask_hits.
Reported by: Ben Pfaff <blp@nicira.com>
Reviewed-by: Thomas Graf <tgraf@redhat.com>
Signed-off-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
We won't normally have a ton of flow masks but using a size_t to store
values no bigger than sizeof(struct sw_flow_key) seems excessive.
This reduces sw_flow_key_range and sw_flow_mask by 4 bytes on 32-bit
systems. On 64-bit systems it shrinks sw_flow_key_range by 12 bytes but
sw_flow_mask only by 8 bytes due to padding.
Compile tested only.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Conflicts:
drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c
net/ipv6/ip6_tunnel.c
net/ipv6/ip6_vti.c
ipv6 tunnel statistic bug fixes conflicting with consolidation into
generic sw per-cpu net stats.
qlogic conflict between queue counting bug fix and the addition
of multiple MAC address support.
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the rfcomm_carrier_raised() definition as that function isn't
used anymore.
Signed-off-by: Gianluca Anzolin <gianluca@sottospazio.it>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch fixes two regressions introduced with the recent rfcomm tty
rework.
The current code uses the carrier_raised() method to wait for the
bluetooth connection when a process opens the tty.
However processes may open the port with the O_NONBLOCK flag or set the
CLOCAL termios flag: in these cases the open() syscall returns
immediately without waiting for the bluetooth connection to
complete.
This behaviour confuses userspace which expects an established bluetooth
connection.
The patch restores the old behaviour by waiting for the connection in
rfcomm_dev_activate() and removes carrier_raised() from the tty_port ops.
As a side effect the new code also fixes the case in which the rfcomm
tty device is created with the flag RFCOMM_REUSE_DLC: the old code
didn't call device_move() and ModemManager skipped the detection
probe. Now device_move() is always called inside rfcomm_dev_activate().
Signed-off-by: Gianluca Anzolin <gianluca@sottospazio.it>
Reported-by: Andrey Vihrov <andrey.vihrov@gmail.com>
Reported-by: Beson Chow <blc+bluez@mail.vanade.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This is a preparatory patch which moves the rfcomm_get_device()
definition before rfcomm_dev_activate() where it will be used.
Signed-off-by: Gianluca Anzolin <gianluca@sottospazio.it>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch fixes a userspace regression introduced by the commit
29cd718b.
If the rfcomm device was created with the flag RFCOMM_RELEASE_ONHUP the
user space expects that the tty_port is released as soon as the last
process closes the tty.
The current code attempts to release the port in the function
rfcomm_dev_state_change(). However it won't get a reference to the
relevant tty to send a HUP: at that point the tty is already destroyed
and therefore NULL.
This patch fixes the regression by taking over the tty refcount in the
tty install method(). This way the tty_port is automatically released as
soon as the tty is destroyed.
As a consequence the check for RFCOMM_RELEASE_ONHUP flag in the hangup()
method is now redundant. Instead we have to be careful with the reference
counting in the rfcomm_release_dev() function.
Signed-off-by: Gianluca Anzolin <gianluca@sottospazio.it>
Reported-by: Alexander Holler <holler@ahsoftware.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
action flushing missaccounting
Account only for deleted actions
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove unnecessary checks for act->ops
(suggested by Eric Dumazet).
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use DEVICE_ATTR_RO/RW macros to simplify bridge sysfs attribute definitions.
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
br_multicast_set_hash_max() is called from process context in
net/bridge/br_sysfs_br.c by the sysfs store_hash_max() function.
br_multicast_set_hash_max() calls spin_lock(&br->multicast_lock),
which can deadlock the CPU if a softirq that also tries to take the
same lock interrupts br_multicast_set_hash_max() while the lock is
held . This can happen quite easily when any of the bridge multicast
timers expire, which try to take the same lock.
The fix here is to use spin_lock_bh(), preventing other softirqs from
executing on this CPU.
Steps to reproduce:
1. Create a bridge with several interfaces (I used 4).
2. Set the "multicast query interval" to a low number, like 2.
3. Enable the bridge as a multicast querier.
4. Repeatedly set the bridge hash_max parameter via sysfs.
# brctl addbr br0
# brctl addif br0 eth1 eth2 eth3 eth4
# brctl setmcqi br0 2
# brctl setmcquerier br0 1
# while true ; do echo 4096 > /sys/class/net/br0/bridge/hash_max; done
Signed-off-by: Curt Brune <curt@cumulusnetworks.com>
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP out_of_order_queue lock is not used, as queue manipulation
happens with socket lock held and we therefore use the lockless
skb queue routines (as __skb_queue_head())
We can use __skb_queue_head_init() instead of skb_queue_head_init()
to make this more consistent.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It does not make sense to create an anycast address for an /128-prefix.
Suppress it.
As 32019e651c ("ipv6: Do not leave router anycast address for /127
prefixes.") shows we also may not leave them, because we could accidentally
remove an anycast address the user has allocated or got added via another
prefix.
Cc: François-Xavier Le Bail <fx.lebail@yahoo.com>
Cc: Thomas Haller <thaller@redhat.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can achieve the same result with a cmpxchg(). This also fixes a
potential race in use_gss_proxy(). The value of sn->use_gss_proxy could
go from -1 to 1 just after we check it in use_gss_proxy() but before we
acquire the spinlock. The procfile write would end up returning success
but the value would flip to 0 soon afterward. With this method we not
only avoid locking but the first "setter" always wins.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
An nfsd thread can call use_gss_proxy and find it set to '1' but find
gssp_clnt still NULL, so that when it attempts the upcall the result
will be an unnecessary -EIO.
So, ensure that gssp_clnt is created first, and set the use_gss_proxy
variable only if that succeeds.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It doesn't make much sense to make reads from this procfile hang. As
far as I can tell, only gssproxy itself will open this file and it
never reads from it. Change it to just give the present setting of
sn->use_gss_proxy without waiting for anything.
Note that we do not want to call use_gss_proxy() in this codepath
since an inopportune read of this file could cause it to be disabled
prematurely.
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Proportional Integral controller Enhanced (PIE) is a scheduler to address the
bufferbloat problem.
>From the IETF draft below:
" Bufferbloat is a phenomenon where excess buffers in the network cause high
latency and jitter. As more and more interactive applications (e.g. voice over
IP, real time video streaming and financial transactions) run in the Internet,
high latency and jitter degrade application performance. There is a pressing
need to design intelligent queue management schemes that can control latency and
jitter; and hence provide desirable quality of service to users.
We present here a lightweight design, PIE(Proportional Integral controller
Enhanced) that can effectively control the average queueing latency to a target
value. Simulation results, theoretical analysis and Linux testbed results have
shown that PIE can ensure low latency and achieve high link utilization under
various congestion situations. The design does not require per-packet
timestamp, so it incurs very small overhead and is simple enough to implement
in both hardware and software. "
Many thanks to Dave Taht for extensive feedback, reviews, testing and
suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and
suggestions. Naeem Khademi and Dave Taht independently contributed to ECN
support.
For more information, please see technical paper about PIE in the IEEE
Conference on High Performance Switching and Routing 2013. A copy of the paper
can be found at ftp://ftpeng.cisco.com/pie/.
Please also refer to the IETF draft submission at
http://tools.ietf.org/html/draft-pan-tsvwg-pie-00
All relevant code, documents and test scripts and results can be found at
ftp://ftpeng.cisco.com/pie/.
For problems with the iproute2/tc or Linux kernel code, please contact Vijay
Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu
(mysuryan@cisco.com)
Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com>
Signed-off-by: Mythili Prabhu <mysuryan@cisco.com>
CC: Dave Taht <dave.taht@bufferbloat.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
On starting a mesh or AP BSS, the interface dtim_count
countdown should match that of the driver TSF.
Signed-off-by: Thomas Pedersen <twpedersen@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
While getting the retry limit, wext-compat returns the value
without updating the flag for retry->flags is 0. Also in this
case, it updates long retry flag when short and long retry
value are unequal.
So, iwconfig never showing "Retry short limit" and showing
"Retry long limit" when both values are unequal.
Updated the flags and corrected the condition properly.
Signed-off-by: Ujjal Roy <royujjal@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
net/netfilter/nfnetlink_queue_core.c: In function 'nfqnl_put_sk_uidgid':
net/netfilter/nfnetlink_queue_core.c:304:35: error: 'TCP_TIME_WAIT' undeclared (first use in this function)
net/netfilter/nfnetlink_queue_core.c:304:35: note: each undeclared identifier is reported only once for each function it appears in
make[3]: *** [net/netfilter/nfnetlink_queue_core.o] Error 1
Just a missing include of net/tcp_states.h
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says: <pablo@netfilter.org>
====================
nftables updates for net-next
The following patchset contains nftables updates for your net-next tree,
they are:
* Add set operation to the meta expression by means of the select_ops()
infrastructure, this allows us to set the packet mark among other things.
From Arturo Borrero Gonzalez.
* Fix wrong format in sscanf in nf_tables_set_alloc_name(), from Daniel
Borkmann.
* Add new queue expression to nf_tables. These comes with two previous patches
to prepare this new feature, one to add mask in nf_tables_core to
evaluate the queue verdict appropriately and another to refactor common
code with xt_NFQUEUE, from Eric Leblond.
* Do not hide nftables from Kconfig if nfnetlink is not enabled, also from
Eric Leblond.
* Add the reject expression to nf_tables, this adds the missing TCP RST
support. It comes with an initial patch to refactor common code with
xt_NFQUEUE, again from Eric Leblond.
* Remove an unused variable assignment in nf_tables_dump_set(), from Michal
Nazarewicz.
* Remove the nft_meta_target code, now that Arturo added the set operation
to the meta expression, from me.
* Add help information for nf_tables to Kconfig, also from me.
* Allow to dump all sets by specifying NFPROTO_UNSPEC, similar feature is
available to other nf_tables objects, requested by Arturo, from me.
* Expose the table usage counter, so we can know how many chains are using
this table without dumping the list of chains, from Tomasz Bursztyka.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
L2CAP RAW sockets can be used for things which do not involve
establishing actual connection oriented L2CAP channels. One example of
such usage is the l2ping tool. The default security level for L2CAP
sockets is LOW, which implies that for SSP based connection
authentication is still requested (although with no MITM requirement),
which is not what we want (or need) for things like l2ping. Therefore,
default to one lower level, i.e. BT_SECURITY_SDP, for L2CAP RAW sockets
in order not to trigger unwanted authentication requests.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Enable the WME for peer mesh STA so that the driver,
such as wcn36xx, will pick this up and enabling it in HW.
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some occurences in the netfilter tree use skb_header_pointer() in
the following way ...
struct dccp_hdr _dh, *dh;
...
skb_header_pointer(skb, dataoff, sizeof(_dh), &dh);
... where dh itself is a pointer that is being passed as the copy
buffer. Instead, we need to use &_dh as the forth argument so that
we're copying the data into an actual buffer that sits on the stack.
Currently, we probably could overwrite memory on the stack (e.g.
with a possibly mal-formed DCCP packet), but unintentionally, as
we only want the buffer to be placed into _dh variable.
Fixes: 2bc780499a ("[NETFILTER]: nf_conntrack: add DCCP protocol support")
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Move the internal scan request allocation below the last
sanity check in ieee80211_register_hw() to avoid leaking
memory if the sanity check actually triggers.
Reported-by: ZHAO Gang <gamerh2o@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the station's TX latency data structures need to be
allocated, handle failures properly and also free all the
structures if there are any other problems.
Move the allocation code up so that allocation failures
don't trigger rate control algorithm calls.
Reported-by: ZHAO Gang <gamerh2o@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Clean up the file macros a bit and use that to remove the
unnecessary format function for the tkip MIC test file
that really is write-only.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Avoid potentially spamming the kernel log with WARN splash messages
when catching wrong usage of seqadj, by simply using WARN_ONCE.
This is a followup to commit db12cf2743 (netfilter: WARN about
wrong usage of sequence number adjustments)
Suggested-by: Flavio Leitner <fbl@redhat.com>
Suggested-by: Daniel Borkmann <dborkman@redhat.com>
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Ying Xue