- Restore terminal stack frame records. Their previous removal caused
traces which cross secondary_start_kernel to terminate one entry too
late, with a spurious "0" entry.
- Fix boot warning with pseudo-NMI due to the way we manipulate the PMR
register.
- ACPI fixes: avoid corruption of interrupt mappings on watchdog probe
failure (GTDT), prevent unregistering of GIC SGIs.
- Force SPARSEMEM_VMEMMAP as the only memory model, it saves with having
to test all the other combinations.
- Documentation fixes and updates: tagged address ABI exceptions on
brk/mmap/mremap(), event stream frequency, update booting requirements
on the configuration of traps.
-----BEGIN PGP SIGNATURE-----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=vYok
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull more arm64 updates from Catalin Marinas:
"A mix of fixes and clean-ups that turned up too late for the first
pull request:
- Restore terminal stack frame records. Their previous removal caused
traces which cross secondary_start_kernel to terminate one entry
too late, with a spurious "0" entry.
- Fix boot warning with pseudo-NMI due to the way we manipulate the
PMR register.
- ACPI fixes: avoid corruption of interrupt mappings on watchdog
probe failure (GTDT), prevent unregistering of GIC SGIs.
- Force SPARSEMEM_VMEMMAP as the only memory model, it saves with
having to test all the other combinations.
- Documentation fixes and updates: tagged address ABI exceptions on
brk/mmap/mremap(), event stream frequency, update booting
requirements on the configuration of traps"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kernel: Update the stale comment
arm64: Fix the documented event stream frequency
arm64: entry: always set GIC_PRIO_PSR_I_SET during entry
arm64: Explicitly document boot requirements for SVE
arm64: Explicitly require that FPSIMD instructions do not trap
arm64: Relax booting requirements for configuration of traps
arm64: cpufeatures: use min and max
arm64: stacktrace: restore terminal records
arm64/vdso: Discard .note.gnu.property sections in vDSO
arm64: doc: Add brk/mmap/mremap() to the Tagged Address ABI Exceptions
psci: Remove unneeded semicolon
ACPI: irq: Prevent unregistering of GIC SGIs
ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure
arm64: Show three registers per line
arm64: remove HAVE_DEBUG_BUGVERBOSE
arm64: alternative: simplify passing alt_region
arm64: Force SPARSEMEM_VMEMMAP as the only memory management model
arm64: vdso32: drop -no-integrated-as flag
- Revent recent commit related to the handling of ACPI power
resources during initialization, because it turned out to cause
problems to occur on some systems (Rafael Wysocki).
- Fix potential use-after-free and potential memory leak in the
ACPI "custom method" debugfs interface (Mark Langsdorf).
- Update ACPI GPIO properties documentation to cover assumptions
regarding GPIO polarity (Andy Shevchenko).
-----BEGIN PGP SIGNATURE-----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=hm7T
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.13-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These revert one recent commit that turned out to be problematic,
address two issues in the ACPI "custom method" interface and update
GPIO properties documentation.
Specifics:
- Revent recent commit related to the handling of ACPI power
resources during initialization, because it turned out to cause
problems to occur on some systems (Rafael Wysocki).
- Fix potential use-after-free and potential memory leak in the ACPI
"custom method" debugfs interface (Mark Langsdorf).
- Update ACPI GPIO properties documentation to cover assumptions
regarding GPIO polarity (Andy Shevchenko)"
* tag 'acpi-5.13-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI: scan: Turn off unused power resources during initialization"
ACPI: custom_method: fix a possible memory leak
ACPI: custom_method: fix potential use-after-free issue
Documentation: firmware-guide: gpio-properties: Add note to SPI CS case
* acpi-pm:
Revert "ACPI: scan: Turn off unused power resources during initialization"
* acpi-docs:
Documentation: firmware-guide: gpio-properties: Add note to SPI CS case
Merge more updates from Andrew Morton:
"The remainder of the main mm/ queue.
143 patches.
Subsystems affected by this patch series (all mm): pagecache, hugetlb,
userfaultfd, vmscan, compaction, migration, cma, ksm, vmstat, mmap,
kconfig, util, memory-hotplug, zswap, zsmalloc, highmem, cleanups, and
kfence"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (143 commits)
kfence: use power-efficient work queue to run delayed work
kfence: maximize allocation wait timeout duration
kfence: await for allocation using wait_event
kfence: zero guard page after out-of-bounds access
mm/process_vm_access.c: remove duplicate include
mm/mempool: minor coding style tweaks
mm/highmem.c: fix coding style issue
btrfs: use memzero_page() instead of open coded kmap pattern
iov_iter: lift memzero_page() to highmem.h
mm/zsmalloc: use BUG_ON instead of if condition followed by BUG.
mm/zswap.c: switch from strlcpy to strscpy
arm64/Kconfig: introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
x86/Kconfig: introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
mm,memory_hotplug: add kernel boot option to enable memmap_on_memory
acpi,memhotplug: enable MHP_MEMMAP_ON_MEMORY when supported
mm,memory_hotplug: allocate memmap from the added memory range
mm,memory_hotplug: factor out adjusting present pages into adjust_present_page_count()
mm,memory_hotplug: relax fully spanned sections check
drivers/base/memory: introduce memory_block_{online,offline}
mm/memory_hotplug: remove broken locking of zone PCP structures during hot remove
...
Let the caller check whether it can pass MHP_MEMMAP_ON_MEMORY by
checking mhp_supports_memmap_on_memory(). MHP_MEMMAP_ON_MEMORY can only
be set in case ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE is enabled, the
architecture supports altmap, and the range to be added spans a single
memory block.
Link: https://lkml.kernel.org/r/20210421102701.25051-6-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Including:
- Big cleanup of almost unsused parts of the IOMMU API by
Christoph Hellwig. This mostly affects the Freescale PAMU
driver.
- New IOMMU driver for Unisoc SOCs
- ARM SMMU Updates from Will:
- SMMUv3: Drop vestigial PREFETCH_ADDR support
- SMMUv3: Elide TLB sync logic for empty gather
- SMMUv3: Fix "Service Failure Mode" handling
- SMMUv2: New Qualcomm compatible string
- Removal of the AMD IOMMU performance counter writeable check
on AMD. It caused long boot delays on some machines and is
only needed to work around an errata on some older (possibly
pre-production) chips. If someone is still hit by this
hardware issue anyway the performance counters will just
return 0.
- Support for targeted invalidations in the AMD IOMMU driver.
Before that the driver only invalidated a single 4k page or the
whole IO/TLB for an address space. This has been extended now
and is mostly useful for emulated AMD IOMMUs.
- Several fixes for the Shared Virtual Memory support in the
Intel VT-d driver
- Mediatek drivers can now be built as modules
- Re-introduction of the forcedac boot option which got lost
when converting the Intel VT-d driver to the common dma-iommu
implementation.
- Extension of the IOMMU device registration interface and
support iommu_ops to be const again when drivers are built as
modules.
-----BEGIN PGP SIGNATURE-----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=qF2C
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Big cleanup of almost unsused parts of the IOMMU API by Christoph
Hellwig. This mostly affects the Freescale PAMU driver.
- New IOMMU driver for Unisoc SOCs
- ARM SMMU Updates from Will:
- Drop vestigial PREFETCH_ADDR support (SMMUv3)
- Elide TLB sync logic for empty gather (SMMUv3)
- Fix "Service Failure Mode" handling (SMMUv3)
- New Qualcomm compatible string (SMMUv2)
- Removal of the AMD IOMMU performance counter writeable check on AMD.
It caused long boot delays on some machines and is only needed to
work around an errata on some older (possibly pre-production) chips.
If someone is still hit by this hardware issue anyway the performance
counters will just return 0.
- Support for targeted invalidations in the AMD IOMMU driver. Before
that the driver only invalidated a single 4k page or the whole IO/TLB
for an address space. This has been extended now and is mostly useful
for emulated AMD IOMMUs.
- Several fixes for the Shared Virtual Memory support in the Intel VT-d
driver
- Mediatek drivers can now be built as modules
- Re-introduction of the forcedac boot option which got lost when
converting the Intel VT-d driver to the common dma-iommu
implementation.
- Extension of the IOMMU device registration interface and support
iommu_ops to be const again when drivers are built as modules.
* tag 'iommu-updates-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (84 commits)
iommu: Streamline registration interface
iommu: Statically set module owner
iommu/mediatek-v1: Add error handle for mtk_iommu_probe
iommu/mediatek-v1: Avoid build fail when build as module
iommu/mediatek: Always enable the clk on resume
iommu/fsl-pamu: Fix uninitialized variable warning
iommu/vt-d: Force to flush iotlb before creating superpage
iommu/amd: Put newline after closing bracket in warning
iommu/vt-d: Fix an error handling path in 'intel_prepare_irq_remapping()'
iommu/vt-d: Fix build error of pasid_enable_wpe() with !X86
iommu/amd: Remove performance counter pre-initialization test
Revert "iommu/amd: Fix performance counter initialization"
iommu/amd: Remove duplicate check of devid
iommu/exynos: Remove unneeded local variable initialization
iommu/amd: Page-specific invalidations for more than one page
iommu/arm-smmu-v3: Remove the unused fields for PREFETCH_CONFIG command
iommu/vt-d: Avoid unnecessary cache flush in pasid entry teardown
iommu/vt-d: Invalidate PASID cache when root/context entry changed
iommu/vt-d: Remove WO permissions on second-level paging entries
iommu/vt-d: Report the right page fault address
...
Revert commit 4b9ee772ea ("ACPI: scan: Turn off unused power
resources during initialization") that is reported to cause
initialization issues to occur.
Reported-by: Shujun Wang <wsj20369@163.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In cm_write(), if the 'buf' is allocated memory but not fully consumed,
it is possible to reallocate the buffer without freeing it by passing
'*ppos' as 0 on a subsequent call.
Add an explicit kfree() before kzalloc() to prevent the possible memory
leak.
Fixes: 526b4af47f ("ACPI: Split out custom_method functionality into an own driver")
Signed-off-by: Mark Langsdorf <mlangsdo@redhat.com>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In cm_write(), buf is always freed when reaching the end of the
function. If the requested count is less than table.length, the
allocated buffer will be freed but subsequent calls to cm_write() will
still try to access it.
Remove the unconditional kfree(buf) at the end of the function and
set the buf to NULL in the -EINVAL error path to match the rest of
function.
Fixes: 03d1571d95 ("ACPI: custom_method: fix memory leaks")
Signed-off-by: Mark Langsdorf <mlangsdo@redhat.com>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Clean up list_sort prototypes (Sami Tolvanen)
- Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)
-----BEGIN PGP SIGNATURE-----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=wU6U
-----END PGP SIGNATURE-----
Merge tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull CFI on arm64 support from Kees Cook:
"This builds on last cycle's LTO work, and allows the arm64 kernels to
be built with Clang's Control Flow Integrity feature. This feature has
happily lived in Android kernels for almost 3 years[1], so I'm excited
to have it ready for upstream.
The wide diffstat is mainly due to the treewide fixing of mismatched
list_sort prototypes. Other things in core kernel are to address
various CFI corner cases. The largest code portion is the CFI runtime
implementation itself (which will be shared by all architectures
implementing support for CFI). The arm64 pieces are Acked by arm64
maintainers rather than coming through the arm64 tree since carrying
this tree over there was going to be awkward.
CFI support for x86 is still under development, but is pretty close.
There are a handful of corner cases on x86 that need some improvements
to Clang and objtool, but otherwise works well.
Summary:
- Clean up list_sort prototypes (Sami Tolvanen)
- Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)"
* tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
arm64: allow CONFIG_CFI_CLANG to be selected
KVM: arm64: Disable CFI for nVHE
arm64: ftrace: use function_nocfi for ftrace_call
arm64: add __nocfi to __apply_alternatives
arm64: add __nocfi to functions that jump to a physical address
arm64: use function_nocfi with __pa_symbol
arm64: implement function_nocfi
psci: use function_nocfi for cpu_resume
lkdtm: use function_nocfi
treewide: Change list_sort to use const pointers
bpf: disable CFI in dispatcher functions
kallsyms: strip ThinLTO hashes from static functions
kthread: use WARN_ON_FUNCTION_MISMATCH
workqueue: use WARN_ON_FUNCTION_MISMATCH
module: ensure __cfi_check alignment
mm: add generic function_nocfi macro
cfi: add __cficanonical
add support for Clang CFI
* acpi-misc:
ACPI: dock: fix some coding style issues
ACPI: sysfs: fix some coding style issues
ACPI: PM: add a missed blank line after declarations
ACPI: custom_method: fix a coding style issue
ACPI: CPPC: fix some coding style issues
ACPI: button: fix some coding style issues
ACPI: battery: fix some coding style issues
ACPI: acpi_pad: add a missed blank line after declarations
ACPI: LPSS: add a missed blank line after declarations
ACPI: ipmi: remove useless return statement for void function
ACPI: processor: fix some coding style issues
ACPI: APD: fix a block comment align issue
ACPI: AC: fix some coding style issues
ACPI: fix various typos in comments
* acpi-scan:
ACPI: bus: Introduce acpi_dev_get() and reuse it in ACPI code
ACPI: scan: Utilize match_string() API
ACPI: scan: Call acpi_get_object_info() from acpi_set_pnp_ids()
ACPI: scan: Drop sta argument from acpi_init_device_object()
ACPI: scan: Drop sta argument from acpi_add_single_object()
ACPI: scan: Rearrange checks in acpi_bus_check_add()
ACPI: scan: Fold acpi_bus_type_and_status() into its caller
* acpi-drivers:
ACPI: HED: Drop unused ACPI_MODULE_NAME() definition
* acpi-pm:
ACPI: power: Turn off unused power resources unconditionally
ACPI: scan: Turn off unused power resources during initialization
* acpi-resources:
resource: Prevent irqresource_disabled() from erasing flags
* acpi-messages:
hwmon: acpi_power_meter: Get rid of ACPICA message printing
IIO: acpi-als: Get rid of ACPICA message printing
ACPI: utils: Introduce acpi_evaluation_failure_warn()
ACPI: Drop unused ACPI_*_COMPONENT definitions and update documentation
ACPI: sysfs: Get rid of ACPICA message printing
* acpi-pci:
ACPI: PCI: Replace direct printk() invocations in pci_link.c
ACPI: PCI: Drop ACPI_PCI_COMPONENT that is not used any more
ACPI: PCI: Replace ACPI_DEBUG_PRINT() and ACPI_EXCEPTION()
ACPI: PCI: IRQ: Consolidate printing diagnostic messages
* acpi-processor:
ACPI: processor: perflib: Eliminate redundant status check
ACPI: processor: Get rid of ACPICA message printing
ACPI: processor: idle: Drop extra prefix from pr_notice()
ACPI: processor: Remove initialization of static variable
When using ACPI on arm64, which implies the GIC IRQ model, no
table should ever provide a GSI number in the range [0:15],
as these are reserved for IPIs.
However, drivers tend to call acpi_unregister_gsi() with any
random GSI number provided by half baked tables, which results
in an exploding kernel when its IPIs have been unconfigured.
In order to catch this, check for the silly case early, warn
that something is going wrong and avoid the above disaster.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: dann frazier <dann.frazier@canonical.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20210421164317.1718831-3-maz@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When failing the driver probe because of invalid firmware properties,
the GTDT driver unmaps the interrupt that it mapped earlier.
However, it never checks whether the mapping of the interrupt actially
succeeded. Even more, should the firmware report an illegal interrupt
number that overlaps with the GIC SGI range, this can result in an
IPI being unmapped, and subsequent fireworks (as reported by Dann
Frazier).
Rework the driver to have a slightly saner behaviour and actually
check whether the interrupt has been mapped before unmapping things.
Reported-by: dann frazier <dann.frazier@canonical.com>
Fixes: ca9ae5ec4e ("acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/YH87dtTfwYgavusz@xps13.dannf
Cc: <stable@vger.kernel.org>
Cc: Fu Wei <wefu@redhat.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: dann frazier <dann.frazier@canonical.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20210421164317.1718831-2-maz@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Force backlight control in these models to use the native interface
at /sys/class/backlight/amdgpu_bl0.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The variable rc is being assigned a value that is never read,
the assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The PCIe controller in Tegra194 SoC is not ECAM-compliant. With the
current hardware design, ECAM can be enabled only for one controller (the
C5 controller) with bus numbers starting from 160 instead of 0. A different
approach is taken to avoid this abnormal way of enabling ECAM for just one
controller but to enable configuration space access for all the other
controllers. In this approach, ops are added through MCFG quirk mechanism
which access the configuration spaces by dynamically programming iATU
(internal AddressTranslation Unit) to generate respective configuration
accesses just like the way it is done in DesignWare core sub-system.
This issue is specific to Tegra194 and it would be fixed in the future
generations of Tegra SoCs.
Link: https://lore.kernel.org/r/20210416134537.19474-1-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The DSDT and ACPI should be capitalized.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The macro requires to call acpi_dev_put() on each iteration.
Due to this it doesn't tolerate sudden disappearence of the devices.
Document all these nuances to prevent users blindly call it without
understanding the possible issues.
While at it, add the note to the acpi_dev_get_next_match_dev() and
advertise acpi_dev_put() instead of put_device() in the whole family
of the helper functions.
Fixes: bf263f64e8 ("media: ACPI / bus: Add acpi_dev_get_next_match_dev() and helper macro")
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Introduce acpi_dev_get() to have a symmetrical API with acpi_dev_put()
and reuse both in ACPI code in drivers/acpi/.
While at it, use acpi_bus_put_acpi_device() in one place instead of
the above.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We have already an API to match a string in the array of strings.
Utilize it instead of open coded analogues.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
list_sort() internally casts the comparison function passed to it
to a different type with constant struct list_head pointers, and
uses this pointer to call the functions, which trips indirect call
Control-Flow Integrity (CFI) checking.
Instead of removing the consts, this change defines the
list_cmp_func_t type and changes the comparison function types of
all list_sort() callers to use const pointers, thus avoiding type
mismatches.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-10-samitolvanen@google.com
All of the CPPC sysfs show functions are called via indirect call in
kobj_attr_show(), where they should be of type
ssize_t (*show)(struct kobject *kobj, struct kobj_attribute *attr, char *buf);
because that is the type of the ->show() member in
'struct kobj_attribute' but they are actually of type
ssize_t (*show)(struct kobject *kobj, struct attribute *attr, char *buf);
because of the ->show() member in 'struct cppc_attr', resulting in a
Control Flow Integrity violation [1].
$ cat /sys/devices/system/cpu/cpu0/acpi_cppc/highest_perf
3400
$ dmesg | grep "CFI failure"
[ 175.970559] CFI failure (target: show_highest_perf+0x0/0x8):
As far as I can tell, the only difference between 'struct cppc_attr'
and 'struct kobj_attribute' aside from the type of the attr parameter
is the type of the count parameter in the ->store() member (ssize_t vs.
size_t), which does not actually matter because all of these nodes are
read-only.
Eliminate 'struct cppc_attr' in favor of 'struct kobj_attribute' to fix
the violation.
[1]: https://lore.kernel.org/r/20210401233216.2540591-1-samitolvanen@google.com/
Fixes: 158c998ea4 ("ACPI / CPPC: add sysfs support to compute delivered performance")
Link: https://github.com/ClangBuiltLinux/linux/issues/1343
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Notice that it is not necessary to call acpi_get_object_info() from
acpi_add_single_object() in order to pass the pointer returned by it
to acpi_init_device_object() and from there to acpi_set_pnp_ids().
It is more straightforward to call acpi_get_object_info() from
acpi_set_pnp_ids() and avoid unnecessary pointer passing, so change
the code accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Use the observation that the initial status check for
ACPI_BUS_TYPE_PROCESSOR objects can be carried out in the same way
as for ACPI_BUS_TYPE_DEVICE objects and it is not necessary to fail
acpi_add_single_object() if acpi_bus_get_status_handle() returns an
error for a processor (its status can be set to 0 instead) to
simplify acpi_add_single_object().
Accordingly, drop the "sta" argument from acpi_init_device_object()
as it can always set the initial status to ACPI_STA_DEFAULT and let
its caller correct that later on.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Move the initial status check for ACPI_BUS_TYPE_PROCESSOR objects
into acpi_add_single_object() so it is not necessary to pass the
"sta" argument to it, get rid of that argument from there and update
the callers of that function accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Rearrange the checks in acpi_bus_check_add() to avoid checking
the "type" twice and take "check_dep" into account only for
ACPI_TYPE_DEVICE objects.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
There is only one caller of acpi_bus_type_and_status() which is
acpi_bus_check_add(), so fold the former into the latter and use
the observation that the initial status of the device is
ACPI_STA_DEFAULT in all cases except for ACPI_BUS_TYPE_PROCESSOR
to simplify the code.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Starting with Windows 8, Windows no longer uses the ACPI-video interface
for backlight control by default. Instead backlight control is left up
to the GPU drivers and these are typically directly accessing the GPU
for this instead of going through ACPI.
This means that the ACPI video interface is no longer being tested by
many vendors, which leads to false-positive /sys/class/backlight entries
on devices which don't have a backlight at all such as desktops or
top-set boxes. These false-positives causes desktop environments to show
a non functional brightness slider in various places.
Checking the LCD flag greatly reduces the amount of false-positives,
so commit 5928c28152 ("ACPI / video: Default lcd_only to true on
Win8-ready and newer machines") enabled the checking of this flag
by default on all win8 BIOS-es. But this let to regressions on some
models, so the check was made stricter adding a DMI chassis-type check
to only enable the LCD flag checking on desktop/server chassis.
Unfortunately the chassis-type reported in the DMI strings is not always
reliable. One class of devices where this is a problem is Intel Bay Trail-T
based top-set boxes / mini PCs / HDMI sticks. These are based on reference
designs which were targetets and the reference design BIOS code
is often used without changing the chassis-type to something more
appropriate.
There are many, many Bay Trail-T based devices affected by this, so DMI
quirking our way out of this is a bad idea. This patch takes a different
approach, Bay Trail-T (unlike regular Bay Trail) is an ACPI-reduced-hw
platform and ACPI-reduced-hw platforms generally don't have
an embedded-controller and thus will use a native (GPU specific) backlight
interface. This patch enables Checking the LCD flag by default on
ACPI-reduced-hw platforms with a win8 BIOS independent of the reported
chassis-type, fixing the false positive /sys/class/backlight entries
on these devices.
Note in hindsight I should have never added the DMI chassis-type check
when the enabling of LCD flag checking on Windows 8 BIOS-es let to some
regressions. Instead I should have added DMI quirks for the (presumably
few) models where the LCD flag check let to issues. But I'm afraid that
it is too late to change this now, changing this now will likely lead to
a bunch of regressions.
This patch was tested on a Mele PCG03 mini PC.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a getter for the acpi_gbl_reduced_hardware variable so that modules
can check if they are running on an ACPI reduced-hw platform or not.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix some coding style issues reported by checkpatch.pl, including
following types:
WARNING: Missing a blank line after declarations
ERROR: spaces required around that ':'
WARNING: Statements should start on a tabstop
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix some coding style issues reported by checkpatch.pl, including
following types:
WARNING: Missing a blank line after declarations
WARNING: Block comments should align the * on each line
ERROR: open brace '{' following function definitions go on the next line
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a missed blank line after declarations, reported by checkpatch.pl.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix the following coding style issue reported by checkpatch.pl
ERROR: "foo * bar" should be "foo *bar"
FILE: drivers/acpi/custom_method.c:22:
+static ssize_t cm_write(struct file *file, const char __user * user_buf,
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix some coding style issues reported by checkpatch.pl, including the
following types:
WARNING: Missing a blank line after declarations
WARNING: unnecessary whitespace before a quoted newline
ERROR: spaces required around that '>='
ERROR: switch and case should be at the same indent
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix some coding style issues reported by checkpatch.pl, including the
following types:
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line
ERROR: code indent should use tabs where possible
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix some coding style issues reported by checkpatch.pl, including the
following types:
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line
ERROR: code indent should use tabs where possible
WARNING: Missing a blank line after declarations
ERROR: spaces required around that '?' (ctx:WxV)
WARNING: Block comments should align the * on each line
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a missed blank line after declarations, reported by checkpatch.pl.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a missed blank line after declarations, reported by checkpatch.pl.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Remove useless return statement for void function, reported by
checkpatch.pl.
WARNING: void function return statements are not generally useful
FILE: drivers/acpi/acpi_ipmi.c:482:
+ return;
+}
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix some coding style issues reported by checkpatch.pl, including the
following types:
ERROR: code indent should use tabs where possible
WARNING: Block comments use a trailing */ on a separate line
WARNING: Missing a blank line after declarations
WARNING: labels should not be indented
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix the following coding style issue reported by checkpatch.pl:
WARNING: Block comments should align the * on each line
+/**
+* Create platform device during acpi scan attach handle.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix some coding style issues reported by checkpatch.pl, including the
following types:
ERROR: "foo * bar" should be "foo *bar"
ERROR: code indent should use tabs where possible
WARNING: Block comments use a trailing */ on a separate line
WARNING: braces {} are not necessary for single statement blocks
WARNING: void function return statements are not generally useful
WARNING: CVS style keyword markers, these will _not_ be updated
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This commit the result of squashing the following:
ACPICA commit 21a316fdaa46b3fb245a1920f3829cb05d6ced6e
ACPICA commit f5506fc7dad08c2a25ef52cf836c2d67385a612c
Link: https://github.com/acpica/acpica/commit/21a316fd
Link: https://github.com/acpica/acpica/commit/f5506fc7
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linus Torvalds