mirror of https://gitee.com/openkylin/linux.git
4833 Commits
Author | SHA1 | Message | Date |
---|---|---|---|
Linus Torvalds | 5d6a1b84e0 |
gpio updates for v5.13
- new driver for the Realtek Otto GPIO controller - ACPI support for gpio-mpc8xxx - edge event support for gpio-sch (+ Kconfig fixes) - Kconfig improvements in gpio-ich - fixes to older issues in gpio-mockup - ACPI quirk for ignoring EC wakeups on Dell Venue 10 Pro 5055 - improve the GPIO aggregator code by using more generic interfaces instead of reimplementing them in the driver - convert the DT bindings for gpio-74x164 to yaml - documentation improvements - a slew of other minor fixes and improvements to GPIO drivers -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmCSptQACgkQEacuoBRx 13KFDQ/+NOkRQuJarKAvGuR5LJ81CbBfH72/m9gJMB9gwNBS7g+esNWrZG/riWVM BVs2fxlC52+ppN1rV7iMEaXSyREULrcidgoZ0H7X2vsI9MRkk/fjzpTRwbJbSLPo C+IXBAHHfuUC1FQNtQk1cuZXl7PToHd/A14KZIkLOBxLjQddpSo7TTkv23Ub1BA7 Se13EaDrBJxzfmLR900kAKCFDyM8VRnIt7/euhmlTcXCxOg/lCbGZ4eBpEZasUs5 UA9PQX0dnnwtMER4b4TQPIdQ345A0l+xqALr8X2leqQ0AqsWQ7kveMwfSRlXI5Hr zyuXRiA0e84h6HXIHE59kXqoa4LJVnW59hgjYx0D+fcZ5gNVnaRg/4LsztJmMd/f uVAZazE4jd81Cr/kbtpEu5mfGPjOVBeUCeDnKtRovnaSMi24HwqvHqIauI9sM8fN locTCYOdLfvxucAJHZ/BWe8yl301/+IlwiHiN+7+/3ljYB+HjAH42rdPwFpP1BWJ bpgd90KxLHezeqsv83U9CTTrVK9ZM2yisVunQUo3bVi6Ztxl2Juv16P5Qs0IJW2F mly+KNTa4M6NKCdP6luEnazmifFIsnreCzTMfPoa9w+eu/vpIw6lZDFpDAbePV+A 8XJ99TxV1Bk9kUjvKiEi2qx6uW7f5k8JIwvRvJWhRXkEzufJyUI= =5vLN -----END PGP SIGNATURE----- Merge tag 'gpio-updates-for-v5.13-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: - new driver for the Realtek Otto GPIO controller - ACPI support for gpio-mpc8xxx - edge event support for gpio-sch (+ Kconfig fixes) - Kconfig improvements in gpio-ich - fixes to older issues in gpio-mockup - ACPI quirk for ignoring EC wakeups on Dell Venue 10 Pro 5055 - improve the GPIO aggregator code by using more generic interfaces instead of reimplementing them in the driver - convert the DT bindings for gpio-74x164 to yaml - documentation improvements - a slew of other minor fixes and improvements to GPIO drivers * tag 'gpio-updates-for-v5.13-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (34 commits) dt-bindings: gpio: add YAML description for rockchip,gpio-bank gpio: mxs: remove useless function dt-bindings: gpio: fairchild,74hc595: Convert to json-schema gpio: it87: remove unused code gpio: 104-dio-48e: Fix coding style issues gpio: mpc8xxx: Add ACPI support gpio: ich: Switch to be dependent on LPC_ICH gpio: sch: Drop MFD_CORE selection gpio: sch: depends on LPC_SCH gpiolib: acpi: Add quirk to ignore EC wakeups on Dell Venue 10 Pro 5055 gpio: sch: Hook into ACPI GPE handler to catch GPIO edge events gpio: sch: Add edge event support gpio: aggregator: Replace custom get_arg() with a generic next_arg() lib/cmdline: Export next_arg() for being used in modules gpio: omap: Use device_get_match_data() helper gpio: Add Realtek Otto GPIO support dt-bindings: gpio: Binding for Realtek Otto GPIO docs: kernel-parameters: Add gpio_mockup_named_lines docs: kernel-parameters: Move gpio-mockup for alphabetic order lib: bitmap: provide devm_bitmap_alloc() and devm_bitmap_zalloc() ... |
|
Jiapeng Chong | e29eaf1c1a |
gpio: mxs: remove useless function
Fix the following gcc warning: drivers/gpio/gpio-mxs.c:63:19: warning: kernel/sys_ni.cunused function 'is_imx28_gpio'. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> |
|
Jiapeng Chong | 5fe7067308 |
gpio: it87: remove unused code
Fix the following clang warning: drivers/gpio/gpio-it87.c:128:20: warning: unused function 'superio_outw' [-Wunused-function]. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Acked-by: Simon Guinot <simon.guinot@sequanux.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> |
|
Barney Goette | abd7a8eab8 |
gpio: 104-dio-48e: Fix coding style issues
Fixed multiple bare uses of 'unsigned' without 'int'. Fixed space around "*" operator. Fixed function parameter alignment to opening parenthesis. Reported by checkpatch. Signed-off-by: Barney Goette <barneygoette@gmail.com> Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> |
|
Ran Wang | 76c47d1449 |
gpio: mpc8xxx: Add ACPI support
Current implementation only supports DT, now add ACPI support. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> |
|
Andy Shevchenko | ba134d29e9 |
gpio: ich: Switch to be dependent on LPC_ICH
Driver is neither dependent to PCI nor using MFD_CORE. Replace those dependency and selection by dependency on LPC_ICH. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
|
Andy Shevchenko | c6b4853fa2 |
gpio: sch: Drop MFD_CORE selection
Since we are depended on LPC_SCH, which selects MFD_CORE, we don't need to do it ourselves. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
|
Randy Dunlap | 71cf76d451 |
gpio: sch: depends on LPC_SCH
Since LPC_SCH provides GPIO functionality, GPIO_SCH should depend on LPC_SCH to prevent kconfig warning and build errors: WARNING: unmet direct dependencies detected for LPC_SCH Depends on [n]: HAS_IOMEM [=y] && PCI [=n] Selected by [y]: - GPIO_SCH [=y] && GPIOLIB [=y] && X86 [=y] && (X86 [=y] || COMPILE_TEST [=n]) && ACPI [=y] and ../drivers/mfd/lpc_sch.c:204:1: warning: data definition has no type or storage class module_pci_driver(lpc_sch_driver); ^~~~~~~~~~~~~~~~~ ../drivers/mfd/lpc_sch.c:204:1: error: type defaults to ‘int’ in declaration of ‘module_pci_driver’ [-Werror=implicit-int] ../drivers/mfd/lpc_sch.c:204:1: warning: parameter names (without types) in function declaration ../drivers/mfd/lpc_sch.c:197:26: warning: ‘lpc_sch_driver’ defined but not used [-Wunused-variable] static struct pci_driver lpc_sch_driver = { ^~~~~~~~~~~~~~ Fixes: 6c46215d6b62 ("gpio: sch: Hook into ACPI GPE handler to catch GPIO edge events") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Denis Turischev <denis@compulab.co.il> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
|
Hans de Goede | da91ece226 |
gpiolib: acpi: Add quirk to ignore EC wakeups on Dell Venue 10 Pro 5055
Like some other Bay and Cherry Trail SoC based devices the Dell Venue 10 Pro 5055 has an embedded-controller which uses ACPI GPIO events to report events instead of using the standard ACPI EC interface for this. The EC interrupt is only used to report battery-level changes and it keeps doing this while the system is suspended, causing the system to not stay suspended. Add an ignore-wake quirk for the GPIO pin used by the EC to fix the spurious wakeups from suspend. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
|
Andy Shevchenko | fdc1f5dfb9 |
gpio: sch: Hook into ACPI GPE handler to catch GPIO edge events
Neither the ACPI description on Intel Minnowboard (v1) platform provides the required information to establish a generic handling nor the hardware capable of doing it. According to the data sheet the hardware can generate SCI events. Therefore, we need to hook from the driver into GPE handler of the ACPI subsystem in order to catch and report GPIO-related events. Validated on the Inlel Minnowboard (v1) platform and Intel Galileo Gen 2. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> |
|
Jan Kiszka | 7a81638485 |
gpio: sch: Add edge event support
Add the required infrastructure to enable and report edge events of the pins to the GPIO core. The actual hook-up of the event interrupt will happen separately. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> |
|
Andy Shevchenko | ac505b6f5f |
gpio: aggregator: Replace custom get_arg() with a generic next_arg()
cmdline library provides next_arg() helper to traverse over parameters and their values given in command line. Replace custom approach in the driver by it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> |
|
Tian Tao | ca40daf39d |
gpio: omap: Use device_get_match_data() helper
Use the device_get_match_data() helper instead of open coding. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> |
|
Sander Vanheule | 0d82fb1127 |
gpio: Add Realtek Otto GPIO support
Realtek MIPS SoCs (platform name Otto) have GPIO controllers with up to 64 GPIOs, divided over two banks. Each bank has a set of registers for 32 GPIOs, with support for edge-triggered interrupts. Each GPIO bank consists of four 8-bit GPIO ports (ABCD and EFGH). Most registers pack one bit per GPIO, except for the IMR register, which packs two bits per GPIO (AB-CD). Although the byte order is currently assumed to have port A..D at offset 0x0..0x3, this has been observed to be reversed on other, Lexra-based, SoCs (e.g. RTL8196E/97D/97F). Interrupt support is disabled for the fallback devicetree-compatible 'realtek,otto-gpio'. This allows for quick support of GPIO banks in which the byte order would be unknown. In this case, the port ordering in the IMR registers may not match the reversed order in the other registers (DCBA, and BA-DC or DC-BA). Signed-off-by: Sander Vanheule <sander@svanheule.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> |
|
Linus Torvalds | 65ec0a7d24 |
This is the bulk of the pin control changes for the v5.13 kernel cycle
Core changes: - A semantic change to handle pinmux and pinconf in explicit order while up until now we depended on the semantic order in the device tree. The device tree is a functional programming language and does not imply any order, so the right thing is for the pin control core to provide these semantics. - Add a new pinmux-select debugfs file which makes it possible to go in and select functions for a pin manually (iteratively, at the prompt) for debugging purposes. - Fixes to gpio regmap handling for a new pin control driver making use of regmap-gpio. - Use octal permissions on debugfs files. New drivers: - A massive rewrite of the former custom pin control driver for MIPS Broadcom devices to instead use the pin control subsystem. New pin control drivers for BCM6345, BCM6328, BCM6358, BCM6362, BCM6368, BCM63268 and BCM6318 SoC variants are implemented. - Support for PM8350, PM8350B, PM8350C, PMK8350, PMR735A and PMR735B in the Qualcomm PMIC GPIO driver. Also the two GPIOs on PM8008 are supported. - Support for the Rockchip RK3568/RK3566 pin controller. - Support for Ingenic JZ4730, JZ4750, JZ4755, JZ4775 and X2000. - Support for Mediatek MTK8195. - Add a new Xilinx ZynqMP pin control driver. Driver improvements and non-urgent fixes: - Modularization and improvements of the Rockchip drivers. - Some new pins added to the description of new Renesas SoCs. - Clarifications of the GPIO base calculation in the Intel driver. - Fix the function names for the MPP54 and MPP55 pins in the Armada CP110 pin controller. - GPIO wakeup interrupt map for Qualcomm SC7280 and SM8350. - Support for ACPI probing of the Qualcomm SC8180x. - Fix interrupt clear status on rockchip - Fix some missing pins on the Ingenic JZ4770, some semantic fixes for the behaviour of the Ingenic pin controller. Add DMIC pins for JZ4780, X1000, X1500 and X1830. - A slew of janitorial like of_node_put() calls. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmCL5sAACgkQQRCzN7AZ XXNX5RAAtdPvDrPzzWdeqNLyodnJu/SyeA2xbmsvywrSvgpSx3FojFW9AXY/sr7w RuhGGA5KhnrovwiabRKoZ0d0lC/JtKdx5g2o9ePFHDy+7BzFnVacBjL38UftSKy0 4QpDNJ3zock/XTUgJdaJEsbHhP/N4fOF/SbLpguYzGz7JpybNrZ+2M73yeQSL6uE yuhn/AgFMLgWS47nSAH91Yt387+XCEfB75nftXyFSN9GpQ9i3VixWsG3Um/Stoma aR7IIknvHdpCrOHH1IKohYcdlOkE7Wh2wHXSJVv26M49Ri5KSXu17lsUknebQ/oq UeDYdd/2q/wFjxdEbG2tqinEYHs3e1RPmatVesgyibtYHGwjnSFo/G6UtG4948ii 1exwBi+0fw58YWLu/z4bhnNtZx6VsOev6mJ5GF7pyYzGIJy3r5J/9KCDzOJEoLom YTVmgZRjzJuH/i0rPgyg3lSxlP/pdvdk1YUMlIYN1zWdPnRqj7/q+qaxPOkltqD+ 20NFkvhQuuq+dLn4jtNK9xr2+vIKxIRPClT3D/lAihEPC5MUaFw/+y/V7c1hEJfS d1dh5DwgHK7i55/lqLFaXeNNYsmY/SiFecoB8xyFnOJFsHlSHe/6NfjmRhOMUn6V IX2GG4CBAzaheIWtN/ub/DcQ1vwA2n9hO5WX+Y3CXkIxXUFPmJY= =QrEn -----END PGP SIGNATURE----- Merge tag 'pinctrl-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "There is a lot going on! Core changes: - A semantic change to handle pinmux and pinconf in explicit order while up until now we depended on the semantic order in the device tree. The device tree is a functional programming language and does not imply any order, so the right thing is for the pin control core to provide these semantics. - Add a new pinmux-select debugfs file which makes it possible to go in and select functions for a pin manually (iteratively, at the prompt) for debugging purposes. - Fixes to gpio regmap handling for a new pin control driver making use of regmap-gpio. - Use octal permissions on debugfs files. New drivers: - A massive rewrite of the former custom pin control driver for MIPS Broadcom devices to instead use the pin control subsystem. New pin control drivers for BCM6345, BCM6328, BCM6358, BCM6362, BCM6368, BCM63268 and BCM6318 SoC variants are implemented. - Support for PM8350, PM8350B, PM8350C, PMK8350, PMR735A and PMR735B in the Qualcomm PMIC GPIO driver. Also the two GPIOs on PM8008 are supported. - Support for the Rockchip RK3568/RK3566 pin controller. - Support for Ingenic JZ4730, JZ4750, JZ4755, JZ4775 and X2000. - Support for Mediatek MTK8195. - Add a new Xilinx ZynqMP pin control driver. Driver improvements and non-urgent fixes: - Modularization and improvements of the Rockchip drivers. - Some new pins added to the description of new Renesas SoCs. - Clarifications of the GPIO base calculation in the Intel driver. - Fix the function names for the MPP54 and MPP55 pins in the Armada CP110 pin controller. - GPIO wakeup interrupt map for Qualcomm SC7280 and SM8350. - Support for ACPI probing of the Qualcomm SC8180x. - Fix interrupt clear status on rockchip - Fix some missing pins on the Ingenic JZ4770, some semantic fixes for the behaviour of the Ingenic pin controller. Add DMIC pins for JZ4780, X1000, X1500 and X1830. - A slew of janitorial like of_node_put() calls" * tag 'pinctrl-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits) pinctrl: Add Xilinx ZynqMP pinctrl driver support firmware: xilinx: Add pinctrl support pinctrl: rockchip: do coding style for mux route struct pinctrl: Add PIN_CONFIG_MODE_PWM to enum pin_config_param pinctrl: Introduce MODE group in enum pin_config_param pinctrl: Keep enum pin_config_param ordered by name dt-bindings: pinctrl: Add binding for ZynqMP pinctrl driver pinctrl: core: Fix kernel doc string for pin_get_name() pinctrl: mediatek: use spin lock in mtk_rmw pinctrl: add drive for I2C related pins on MT8195 pinctrl: add pinctrl driver on mt8195 dt-bindings: pinctrl: mt8195: add pinctrl file and binding document pinctrl: Ingenic: Add pinctrl driver for X2000. pinctrl: Ingenic: Add pinctrl driver for JZ4775. pinctrl: Ingenic: Add pinctrl driver for JZ4755. pinctrl: Ingenic: Add pinctrl driver for JZ4750. pinctrl: Ingenic: Add pinctrl driver for JZ4730. dt-bindings: pinctrl: Add bindings for new Ingenic SoCs. pinctrl: Ingenic: Reformat the code. pinctrl: Ingenic: Add DMIC pins support for Ingenic SoCs. ... |
|
Linus Torvalds | 71a5cc28e8 |
- Core Frameworks
- Add support for Software Nodes to MFD Core - Remove support for Device Properties from MFD Core - Use standard APIs in MFD Core - New Drivers - Add support for ROHM BD9576MUF and BD9573MUF PMICs - Add support for Netronix Embedded Controller, PWM and RTC - Add support for Actions Semi ATC260x PMICs and OnKey - New Device Support - Add support for DG1 PCIe Graphics Card to Intel PMT - Add support for ROHM BD71815 PMIC to ROHM BD71828 - Add support for Tolino Shine 2 HD to Netronix Embedded Controller - Add support for AX10 BMC Secure Updates to Intel M10 BMC - Removed Device Support - Remove Arizona Extcon support from MFD - Remove ST-E AB8500 Power Supply code from MFD - Remove AB3100 altogether - New Functionality - Add support for SMBus and I2C modes to Dialog DA9063 - Switch to using Software Nodes in Intel (various) - New/converted Device Tree bindings; rohm,bd71815-pmic, rohm,bd9576-pmic, netronix,ntxec, actions,atc260x, ricoh,rn5t618, qcom-pm8xxx - Fix-ups - Fix error handling/path; intel_pmt - Simplify code; rohm-bd718x7, ab8500-core, intel-m10-bmc - Trivial clean-ups (reordering, spelling); rohm-generic, rn5t618, max8997 - Use correct data-type; db8500-prcmu - Remove superfluous code; lp87565, intel_quark_i2c_gpi, lpc_sch, twl - Use generic APIs/defines; lm3533-core, intel_quark_i2c_gpio - Regmap related fix-ups; intel-m10-bmc, sec-core - Reorder resource freeing during remove; intel_quark_i2c_gpio - Make table indexing more robust; intel_quark_i2c_gpio - Fix reference imbalances; arizona-irq - Staticify and (un)constify things; arizona-spi, stmpe, ene-kb3930, intel-lpss-acpi, intel-lpss-pci, atc260x-i2c, intel_quark_i2c_gpio - Bug Fixes - Fix incorrect (register) values; intel-m10-bmc - Kconfig related fixes; ABX500_CORE - Do not clear the Auto Reload Register; stm32-timers -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmCJIPEACgkQUa+KL4f8 d2FRZA//Xu9f8u2uLuIfuhxIjUUXOqIjRAFnkhKlgGZhKsY8BohjQ80Tj9yp6UKy St6ABwACO0hJap4zL4FxPW9+HXTmqZvAibnvHnvZdYSQ3ai6x9h6kTNvhSNLeRQU fuY7eN8kpAHHiHNKNJCsQLQMvcIyP7+0KAP6qir5GYsMjiXspWq7THUnfBi2JXC6 y60guDo9XrgmQTO+pB870UJrKLM/h+iiohNRGxLFlShKhFCgbTB/wyw6bFeKy1SB 0/6XuY6fOt1IQyBDuzw383Q2faMWO9U+es29bwvFxdqJDK0MHQXC47zBba2q94wL /9i/HSoz9dRHnTJNYUKWsVcPv4T84w/Iq7scyDvE00ubehJ+oo/M7Au3M6Tt3M1/ 6lBAwFYXiwhQnp9EP3nwPwgJF6JzX1IGuMOsUAqrVFOEMuIkZKbRdUlatUhqepJT spV4/TOfztAhY/7BzEOZLnF8cFNjmL5sn42/UzSRW708V5SxuTNsS48KJ4l0c7Er CZSTlR/T1rKkWqf7ejaS2TNqMCdYyB3vZW0quDxZTHTZHv9huNUvtbKPR7jmd+4p mrMIik7EE4BzC5m8tBPnXXZl+Og0keeYv4LUDBuLDX1agrxYIErl4ITvQTqqMfX1 Jt14SIjSO56iu2ngQuvGWwegVK4/urO2kBJKUAH1QN1OocNaajQ= =IJSL -----END PGP SIGNATURE----- Merge tag 'mfd-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Framework: - Add support for Software Nodes to MFD Core - Remove support for Device Properties from MFD Core - Use standard APIs in MFD Core New Drivers: - Add support for ROHM BD9576MUF and BD9573MUF PMICs - Add support for Netronix Embedded Controller, PWM and RTC - Add support for Actions Semi ATC260x PMICs and OnKey New Device Support: - Add support for DG1 PCIe Graphics Card to Intel PMT - Add support for ROHM BD71815 PMIC to ROHM BD71828 - Add support for Tolino Shine 2 HD to Netronix Embedded Controller - Add support for AX10 BMC Secure Updates to Intel M10 BMC Removed Device Support: - Remove Arizona Extcon support from MFD - Remove ST-E AB8500 Power Supply code from MFD - Remove AB3100 altogether New Functionality: - Add support for SMBus and I2C modes to Dialog DA9063 - Switch to using Software Nodes in Intel (various) New/converted Device Tree bindings: - rohm bd71815-pmic, rohm bd9576-pmic, netronix ntxec, actions atc260x, ricoh rn5t618, qcom pm8xxx - Fix-ups: - Fix error handling/path; intel_pmt - Simplify code; rohm-bd718x7, ab8500-core, intel-m10-bmc - Trivial clean-ups (reordering, spelling); rohm-generic, rn5t618, max8997 - Use correct data-type; db8500-prcmu - Remove superfluous code; lp87565, intel_quark_i2c_gpi, lpc_sch, twl - Use generic APIs/defines; lm3533-core, intel_quark_i2c_gpio - Regmap related fix-ups; intel-m10-bmc, sec-core - Reorder resource freeing during remove; intel_quark_i2c_gpio - Make table indexing more robust; intel_quark_i2c_gpio - Fix reference imbalances; arizona-irq - Staticify and (un)constify things; arizona-spi, stmpe, ene-kb3930, intel-lpss-acpi, intel-lpss-pci, atc260x-i2c, intel_quark_i2c_gpio Bug Fixes: - Fix incorrect (register) values; intel-m10-bmc - Kconfig related fixes; ABX500_CORE - Do not clear the Auto Reload Register; stm32-timers" * tag 'mfd-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (84 commits) mfd: intel-m10-bmc: Add support for MAX10 BMC Secure Updates Revert "mfd: max8997: Add of_compatible to Extcon and Charger mfd_cell" mfd: twl: Remove unused inline function twl4030charger_usb_en() dt-bindings: mfd: Convert pm8xxx bindings to yaml dt-bindings: mfd: Add compatible for pmk8350 rtc i2c: designware: Get rid of legacy platform data mfd: intel_quark_i2c_gpio: Convert I²C to use software nodes mfd: lpc_sch: Partially revert "Add support for Intel Quark X1000" mfd: arizona: Fix rumtime PM imbalance on error mfd: max8997: Replace 8998 with 8997 mfd: core: Use acpi_find_child_device() for child devices lookup mfd: intel_quark_i2c_gpio: Don't play dirty trick with const mfd: intel_quark_i2c_gpio: Enable MSI interrupt mfd: intel_quark_i2c_gpio: Reuse BAR definitions for MFD cell indexing mfd: ntxec: Support for EC in Tolino Shine 2 HD mfd: stm32-timers: Avoid clearing auto reload register mfd: intel_quark_i2c_gpio: Replace I²C speeds with descriptive definitions mfd: intel_quark_i2c_gpio: Remove unused struct device member mfd: intel_quark_i2c_gpio: Unregister resources in reversed order mfd: Kconfig: ABX500_CORE should depend on ARCH_U8500 ... |
|
Linus Torvalds | 37f00ab4a0 |
ARM: SoC drivers for v5.13
Updates for SoC specific drivers include a few subsystems that have their own maintainers but send them through the soc tree: TEE/OP-TEE: - Add tracepoints around calls to secure world Memory controller drivers: - Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms - Add debug statistics to Tegra20 memory controller - Update Tegra bindings and convert to dtschema ARM SCMI Firmware: - Support for modular SCMI protocols and vendor specific extensions - New SCMI IIO driver - Per-cpu DVFS The other driver changes are all from the platform maintainers directly and reflect the drivers that don't fit into any other subsystem as well as treewide changes for a particular platform. SoCFPGA: - Various cleanups contributed by Krzysztof Kozlowski Mediatek: - add MT8183 support to mutex driver - MMSYS: use per SoC array to describe the possible routing - add MMSYS support for MT8183 and MT8167 - add support for PMIC wrapper with integrated arbiter - add support for MT8192/MT6873 Tegra: - Bug fixes to PMC and clock drivers NXP/i.MX: - Update SCU power domain driver to keep console domain power on. - Add missing ADC1 power domain to SCU power domain driver. - Update comments for single global power domain in SCU power domain driver. - Add i.MX51/i.MX53 unique id support to i.MX SoC driver. NXP/FSL SoC driver updates for v5.13 - Add ACPI support for RCPM driver - Use generic io{read,write} for QE drivers after performance optimized for PowerPC - Fix QBMAN probe to cleanup HW states correctly for kexec - Various cleanup and style fix for QBMAN/QE/GUTS drivers OMAP: - Preparation to use devicetree for genpd - ti-sysc needs iorange check improved when the interconnect target module has no control registers listed - ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid issues with missing resources and unnecessary deferred probe - ti-sysc debug option can now detect more devices - ti-sysc now warns if an old incomplete devicetree data is found as we now rely on it being complete for am3 and 4 - soc init code needs to check for prcm and prm nodes for omap4/5 and dra7 - omap-prm driver needs to enable autoidle retention support for omap4 - omap5 clocks are missing gpmc and ocmc clock registers - pci-dra7xx now needs to use builtin_platform_driver instead of using builtin_platform_driver_probe for deferred probe to work Raspberry Pi: - Fix-up all RPi firmware drivers so as for unbind to happen in an orderly fashion - Support for RPi's PoE hat PWM bus Qualcomm - Improved detection for SCM calling conventions - Support for OEM specific wifi firmware path - Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP Signed-off-by: Arnd Bergmann <arnd@arndb.de> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmCC2JwACgkQmmx57+YA GNkgRg//cBtq2NyDbjiNABxFSkmGCfcc0w0C2wjVzr4cfg6BLTbuvvlpZxI912pu P1G2sbsdfQJ8sSeIyZos+PilWK0zHrqlaGZfKI19US45dMjpteDBgsPd7wNZwBjQ jbops3YLjztZK1HpY4dIdvMnfxt7yRqhBWaTbPuCwQ35c5KsOM8NHB3cP3BUINWK x1uuBCv9svppzwdDiPxneV93WKEzabOUo+WBMPyh5vnyvmW17Iif4BA/VKQxzymm mWUi8HHpKBpvntJOKwAD2hnLAdpR3SwX20SLOpyLhnJMotbzNUEqq3LdRxDNPdHk ry+rarJ78JGlYfpcfegf2bLf5ITNMfOyRGkjtzeYpcZIXPjufOg9DA9YtAy37k0u L0T/9gQ+tQ01WGMca77OyUtIqJKdblZrQMfuH/yGlR99bqFQMV7rNc7GNlX1MXp/ zw4aOYrRWGtGEeAjx5JJWcYydvMSJpCrqxTz3YhgeJECHB2iA6YkV3NROR4TLW// tfxaKqxR/KmSqE6hoVOAuuQ0BLXNlql/+4EE6MKsAOBiKPJclvmJg4CyuY8G21ev 9Su0zJnXMzai7gNu32v1pizGj26+AOhxCEgAG0mGgk2jlQSn24CKgm5e7kCUewcF j/1XksNPT95v/K8MsLpXe5xGvF3jhA1BlFfvjJNZOrcZywBXRxg= =iidq -----END PGP SIGNATURE----- Merge tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "Updates for SoC specific drivers include a few subsystems that have their own maintainers but send them through the soc tree: TEE/OP-TEE: - Add tracepoints around calls to secure world Memory controller drivers: - Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms - Add debug statistics to Tegra20 memory controller - Update Tegra bindings and convert to dtschema ARM SCMI Firmware: - Support for modular SCMI protocols and vendor specific extensions - New SCMI IIO driver - Per-cpu DVFS The other driver changes are all from the platform maintainers directly and reflect the drivers that don't fit into any other subsystem as well as treewide changes for a particular platform. SoCFPGA: - Various cleanups contributed by Krzysztof Kozlowski Mediatek: - add MT8183 support to mutex driver - MMSYS: use per SoC array to describe the possible routing - add MMSYS support for MT8183 and MT8167 - add support for PMIC wrapper with integrated arbiter - add support for MT8192/MT6873 Tegra: - Bug fixes to PMC and clock drivers NXP/i.MX: - Update SCU power domain driver to keep console domain power on. - Add missing ADC1 power domain to SCU power domain driver. - Update comments for single global power domain in SCU power domain driver. - Add i.MX51/i.MX53 unique id support to i.MX SoC driver. NXP/FSL SoC driver updates for v5.13 - Add ACPI support for RCPM driver - Use generic io{read,write} for QE drivers after performance optimized for PowerPC - Fix QBMAN probe to cleanup HW states correctly for kexec - Various cleanup and style fix for QBMAN/QE/GUTS drivers OMAP: - Preparation to use devicetree for genpd - ti-sysc needs iorange check improved when the interconnect target module has no control registers listed - ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid issues with missing resources and unnecessary deferred probe - ti-sysc debug option can now detect more devices - ti-sysc now warns if an old incomplete devicetree data is found as we now rely on it being complete for am3 and 4 - soc init code needs to check for prcm and prm nodes for omap4/5 and dra7 - omap-prm driver needs to enable autoidle retention support for omap4 - omap5 clocks are missing gpmc and ocmc clock registers - pci-dra7xx now needs to use builtin_platform_driver instead of using builtin_platform_driver_probe for deferred probe to work Raspberry Pi: - Fix-up all RPi firmware drivers so as for unbind to happen in an orderly fashion - Support for RPi's PoE hat PWM bus Qualcomm - Improved detection for SCM calling conventions - Support for OEM specific wifi firmware path - Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP" * tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits) soc: aspeed: fix a ternary sign expansion bug memory: mtk-smi: Add device-link between smi-larb and smi-common memory: samsung: exynos5422-dmc: handle clk_set_parent() failure memory: renesas-rpc-if: fix possible NULL pointer dereference of resource clk: socfpga: fix iomem pointer cast on 64-bit soc: aspeed: Adapt to new LPC device tree layout pinctrl: aspeed-g5: Adapt to new LPC device tree layout ipmi: kcs: aspeed: Adapt to new LPC DTS layout ARM: dts: Remove LPC BMC and Host partitions dt-bindings: aspeed-lpc: Remove LPC partitioning soc: fsl: enable acpi support in RCPM driver soc: qcom: mdt_loader: Detect truncated read of segments soc: qcom: mdt_loader: Validate that p_filesz < p_memsz soc: qcom: pdr: Fix error return code in pdr_register_listener firmware: qcom_scm: Fix kernel-doc function names to match firmware: qcom_scm: Suppress sysfs bind attributes firmware: qcom_scm: Workaround lack of "is available" call on SC7180 firmware: qcom_scm: Reduce locking section for __get_convention() firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers" ... |
|
Linus Torvalds | 22c4e5bcd3 |
gpio fixes for v5.12
- save and restore the sysconfig register in gpio-omap -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmCCfxYACgkQEacuoBRx 13LsuRAAg2Bjg5FBtR50WPtq368S/0zgYpEYHdK65b3m/hJnopJYRWjVfHHu/Kgr L2073YWqBGHfOvY8JoGN+n1V0sLthf6fCUgkJ+hoe1TjohGDIa2+n1nByklgb7kJ kAZwqxJPw3KnVskVaszPPO+AAo4nIBlHM/Bt6DldF5A9O25d56/1f5JqXLfOCVCl qeJbH+pDknh3J64EVJOCt65ESSK0soeDKX1oKMgBMgCddFFBI/E5mhSjSGBuW7Cw +WT7gQoGerUW5vKeGPjHjz//S+NuxeIIEFHQZROezLAoyRw9MIhmr1LGQMwvnoFg nrWFOoQw0Bd8Yd0K31q2mKa4K7kMUmr1PJY7rjID/jG97j0pqJTTdlFFySq+Q4Np IyCfg7S5l9EBeuJnKrAyuBWBy0y4UgTALBtsCxbwcbMSPh4o0dngjURQL/GaJFaG /7SZKBYYDHLe6pMAz96Bqm1In5B5qLC6U5MuRUqZUjLmszO6OHtfItP+ccUILat9 BGMGOpgsdNXC7T0eAReEAaIpFHmiJREBnK1d78YmGoCy/2oN9r+zPc12tSfIiOFk FaKClkI84jlLMYS2eU/6MWxpTjjspw8Af/OonkDKf8D+nAoavo2i2L1SLHwjmae8 6lLHnQWQS9aZyJW5gAMlvWpyy8M9hKV+8yEn3+NoAil1sxFEqOo= =zaJj -----END PGP SIGNATURE----- Merge tag 'gpio-fixes-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fix from Bartosz Golaszewski: "Save and restore the sysconfig register in gpio-omap to fix a power-management issue" * tag 'gpio-fixes-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: omap: Save and restore sysconfig |
|
Tony Lindgren | ddd8d94ca3 |
gpio: omap: Save and restore sysconfig
As we are using cpu_pm to save and restore context, we must also save and
restore the GPIO sysconfig register. This is needed because we are not
calling PM runtime functions at all with cpu_pm.
We need to save the sysconfig on idle as it's value can get reconfigured by
PM runtime and can be different from the init time value. Device specific
flags like "ti,no-idle-on-init" can affect the init value.
Fixes:
|
|
Linus Torvalds | 33f0d9d94a |
gpio fixes for v5.12-rc8
- do not allow exporting GPIO lines which were marked invalid by the driver -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmB4RdwACgkQEacuoBRx 13ItChAAydlxfHgcH0GFnOHOy6Ezp1hgxZF9Chu+YniFM7tNGRmA+Kty4J3o1dp7 j7d0+wZ7Ju3CJ6bO2Eun2NW7BN3UlFOpl0At2UjN6xybY+IrCZBq3w4RrmhI+xrJ Xbx0GuJKKqtCj8SRg6fAwLMopiHzO7UYd95NOEVpl3zAfHoxMi1dIxUs6vjxWL9f Hem/QcuMHZtYI62LAPHlNGUCxDavj1jWD7UNmLPLHJ1NagVqdXxhRhCuFCwt7nq/ ss0HvIATRoKKS6e28hNTOQTdI4FJViqflCleeGnXTEKK4DcwltcC3Ka+4Qsm3/Uz vIFAvi9FKctPCzc1JajyrQTd2oabTJ+bvv8AkxeDYYwdXZHCxIku/s4cmg7ioKn6 xLXM9OOpzc5x4nRksK6hPo/Q6iKh2Iy9lRYu2I9bgaJiL3tig3aSSOQLgin0dr4p E7Rr6yXCvQxyVQyyakgznFFTahaA61x2UdgPKM+Z6qjSbCLhS3yxZDaEaOxk0JyL OrFctItSkgtQoNecjS9pQ6msfJDFjS7qFuvwMZ+Tk91sOnseLCfD4HfxIjpiPJjh DeQ6+/dxnU8OGg7VQwI4DfATBc0g+2v5MlUUKPGrDdy3jAo9SlLqo9HFZ6HImEZZ Z0w4Vb8Q1vC6TlS7n+N2CAyrN2EaIRENG9/WBXv0lMggK58wz5A= =GnR0 -----END PGP SIGNATURE----- Merge tag 'gpio-fixes-for-v5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fix from Bartosz Golaszewski: "A single fix for an older problem with the sysfs interface: do not allow exporting GPIO lines which were marked invalid by the driver" * tag 'gpio-fixes-for-v5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: sysfs: Obey valid_mask |
|
Lee Jones | 1658d6242a |
Immutable branch between MFD, Clock, GPIO, Regulator and RTC due for the v5.13 merge window
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmB2tEoACgkQUa+KL4f8 d2GqwRAAoslBlgvaQy5UB/dD1sVFzNNeqUhXJIYHMN0AvC5BRiysEBUqWotf0CKp ywl34SRiEyZ7RAgyYZpZ3gR7pmx8tPSf8PzKMLyZgzOfj5JjEM35Qu7oxPpi7Cnl g6kRvlUyVHeFS0uNkUORg7pG3MA43kx6u2SjjEHIyPdDgjmT9QWHH8/8sQdv++Hs AOFvsqe5rIpyDKvY0h/xG018AMq8Gr3kZNCg2rYPoxzzjXWZK5CPInzbLnrkZ0Nh HEehgtEYN+QmFp6tU1AdJXDReEckQkyOGJ1jSy5sPAKWJ0NKKzaTjwcP8T0KN7Nw 03VYhA6iom9U4oQGVxZLKKm20QRvevx2ZzYU8yK9qEamwsGADBwlNxO1v3C4dYUT AC1xrmu570Hr7EaZYQkU0s4kjqIyZfm9JOTcsltOGYACvE34tgIMiIR5qu1VXnmX OcOBUGiQqFovu+zYgHvMhggjclTYu5xM+DH7coi9iFLc7FftbjXF+T8Q/EV/qAfL SaVbCQ1XYMefA92pI4kntHMhTe+eNSEDHodc1Tuw/dN4kEJ82R13WpCojH5L739I VXaB7GO11W6iVD1wgmv03pf2Ce+TLifHZE90t8GSh5zztND1qI60c3Mc4KOSkGHU i5qbGdyFph2MYnWzydPJgSNXoCzLsT/sHwABprOIa7/05mNfEyc= =7O9a -----END PGP SIGNATURE----- mergetag object |
|
Matti Vaittinen | 703b288f3e |
gpio: Support ROHM BD71815 GPOs
Support GPO(s) found from ROHM BD71815 power management IC. The IC has two GPO pins but only one is properly documented in the data-sheet. The driver exposes by default only the documented GPO. The second GPO is connected to E5 pin and is marked as GND in the data-sheet. Control for this undocumented pin can be enabled using a special DT property. This driver is derived from work by Peter Yang <yanglsh@embest-tech.com> although not so much of the original is left. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
|
Marek Behún | b37c384843 |
treewide: change my e-mail address, fix my name
Change my e-mail address to kabel@kernel.org, and fix my name in non-code parts (add diacritical mark). Link: https://lkml.kernel.org/r/20210325171123.28093-2-kabel@kernel.org Signed-off-by: Marek Behún <kabel@kernel.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jassi Brar <jassisinghbrar@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
Matti Vaittinen | 23cf00ddd2 |
gpio: sysfs: Obey valid_mask
Do not allow exporting GPIOs which are set invalid
by the driver's valid mask.
Fixes:
|
|
Álvaro Fernández Rojas | d46bf9ec45 |
gpio: regmap: set gpio_chip of_node
This is needed for properly registering GPIO regmap as a child of a regmap pin controller. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Michael Walle <michael@walle.cc> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20210324081923.20379-3-noltari@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
|
Andy Shevchenko | e5391a02bc |
gpio: mockup: Drop duplicate NULL check in gpio_mockup_unregister_pdevs()
Since platform_device_unregister() is NULL-aware, we don't need to duplicate this check. Remove it and fold the rest of the code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> |
|
Andy Shevchenko | 266315fb7c |
gpiolib: Fold conditionals into a simple ternary operator
It's quite spread code to initialize IRQ domain options. Let's fold it into a simple oneliner. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> |
|
Andy Shevchenko | 5c63a9dbab |
gpiolib: Reuse device's fwnode to create IRQ domain
When IRQ domain is created for an ACPI case, the name of it becomes unknown-%d since for now it utilizes of_node member only and doesn't consider fwnode case. Convert IRQ domain creation code to utilize fwnode instead. Before/After the change on Intel Galileo Gen 2 with two GPIO (IRQ) controllers: unknown-1 ==> \_SB.PCI0.GIP0.GPO unknown-2 ==> \_SB.NIO3 Due to the nature of this change we may also deduplicate the WARN():s because in either case (DT or ACPI) the fwnode will be set correctly and %pfw is an equivalent to what the current code prints as a prefix. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> |
|
Andy Shevchenko | 515321acb5 |
gpiolib: Introduce acpi_gpio_dev_init() and call it from core
In the ACPI case we may use the firmware node in the similar way as it's done for OF case. We may use that fwnode for other purposes in the future. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> |
|
Andy Shevchenko | 1df62542e0 |
gpiolib: Move of_node operations to gpiolib-of and correct fwnode use
The initial value of the OF node based on presence of parent, but at the same time this operation somehow appeared separately from others that handle the OF case. On the other hand there is no need to assign dev->fwnode in the OF case if code properly retrieves fwnode, i.e. via dev_fwnode() helper. Amend gpiolib.c and gpiolib-of.c code in order to group OF operations. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> |
|
Andy Shevchenko | 944f4b0af9 |
gpiolib: Unify the checks on fwnode type
We have (historically) different approaches how we identify the type of a given fwnode. Let's standardize them across the library code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> |
|
Nicolas Saenz Julienne | 0e3333b29c |
gpio: raspberrypi-exp: Release firmware handle on unbind
Use devm_rpi_firmware_get() so as to make sure we release RPi's firmware interface when unbinding the device. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> |
|
Andy Shevchenko | 6cb59afe9e |
gpiolib: Assign fwnode to parent's if no primary one provided
In case when the properties are supplied in the secondary fwnode
(for example, built-in device properties) the fwnode pointer left
unassigned. This makes unable to retrieve them.
Assign fwnode to parent's if no primary one provided.
Fixes:
|
|
Wei Yongjun | 3875721e82 |
gpiolib: Fix error return code in gpiolib_dev_init()
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes:
|
|
Andy Shevchenko | b41ba2ec54 |
gpiolib: Read "gpio-line-names" from a firmware node
On STM32MP1, the GPIO banks are subnodes of pin-controller@50002000,
see arch/arm/boot/dts/stm32mp151.dtsi. The driver for
pin-controller@50002000 is in drivers/pinctrl/stm32/pinctrl-stm32.c
and iterates over all of its DT subnodes when registering each GPIO
bank gpiochip. Each gpiochip has:
- gpio_chip.parent = dev,
where dev is the device node of the pin controller
- gpio_chip.of_node = np,
which is the OF node of the GPIO bank
Therefore, dev_fwnode(chip->parent) != of_fwnode_handle(chip.of_node),
i.e. pin-controller@50002000 != pin-controller@50002000/gpio@5000*000.
The original code behaved correctly, as it extracted the "gpio-line-names"
from of_fwnode_handle(chip.of_node) = pin-controller@50002000/gpio@5000*000.
To achieve the same behaviour, read property from the firmware node.
Fixes:
|
|
Andy Shevchenko | eb441337c7 |
gpio: pca953x: Set IRQ type when handle Intel Galileo Gen 2
The commit |
|
Andy Shevchenko | 809390219f |
gpiolib: acpi: Allow to find GpioInt() resource by name and index
Currently only search by index is supported. However, in some cases we might need to pass the quirks to the acpi_dev_gpio_irq_get(). For this, split out acpi_dev_gpio_irq_get_by() and replace acpi_dev_gpio_irq_get() by calling above with NULL for name parameter. Fixes: |
|
Andy Shevchenko | 62d5247d23 |
gpiolib: acpi: Add ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER quirk
On some systems the ACPI tables has wrong pin number and instead of having a relative one it provides an absolute one in the global GPIO number space. Add ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER quirk to cope with such cases. Fixes: |
|
Yang Li | 6e5d579173 |
gpiolib: acpi: Add missing IRQF_ONESHOT
fixed the following coccicheck: ./drivers/gpio/gpiolib-acpi.c:176:7-27: ERROR: Threaded IRQ with no primary handler requested without IRQF_ONESHOT Make sure threaded IRQs without a primary handler are always request with IRQF_ONESHOT Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
|
Johan Hovold | cf25ef6b63 |
gpio: fix gpio-device list corruption
Make sure to hold the gpio_lock when removing the gpio device from the
gpio_devices list (when dropping the last reference) to avoid corrupting
the list when there are concurrent accesses.
Fixes:
|
|
Johan Hovold | a6112998ee |
gpio: fix NULL-deref-on-deregistration regression
Fix a NULL-pointer deference when deregistering the gpio character
device that was introduced by the recent stub-driver hack. When the new
"driver" is unbound as part of deregistration, driver core clears the
driver-data pointer which is used to retrieve the struct gpio_device in
its release callback.
Fix this by using container_of() in the release callback as should have
been done all along.
Fixes:
|
|
Linus Torvalds | 7ac1161c27 |
Driver core / debugfs update for 5.12-rc1
Here is the "big" driver core and debugfs update for 5.12-rc1 This set of driver core patches caused a bunch of problems in linux-next for the past few weeks, when Saravana tried to set fw_devlink=on as the default functionality. This caused a number of systems to stop booting, and lots of bugs were fixed in this area for almost all of the reported systems, but this option is not ready to be turned on just yet for the default operation based on this testing, so I've reverted that change at the very end so we don't have to worry about regressions in 5.12. We will try to turn this on for 5.13 if testing goes better over the next few months. Other than the fixes caused by the fw_devlink testing in here, there's not much more: - debugfs fixes for invalid input into debugfs_lookup() - kerneldoc cleanups - warn message if platform drivers return an error on their remove callback (a futile effort, but good to catch). All of these have been in linux-next for a while now, and the regressions have gone away with the revert of the fw_devlink change. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYDZhzA8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ylS2wCfU28FxDWNwcWhPFVfRT8Mb3OxZ50An1sR4lNR t5Ie4aztMUjVJhI9bq6g =3NSB -----END PGP SIGNATURE----- Merge tag 'driver-core-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core / debugfs update from Greg KH: "Here is the "big" driver core and debugfs update for 5.12-rc1 This set of driver core patches caused a bunch of problems in linux-next for the past few weeks, when Saravana tried to set fw_devlink=on as the default functionality. This caused a number of systems to stop booting, and lots of bugs were fixed in this area for almost all of the reported systems, but this option is not ready to be turned on just yet for the default operation based on this testing, so I've reverted that change at the very end so we don't have to worry about regressions in 5.12 We will try to turn this on for 5.13 if testing goes better over the next few months. Other than the fixes caused by the fw_devlink testing in here, there's not much more: - debugfs fixes for invalid input into debugfs_lookup() - kerneldoc cleanups - warn message if platform drivers return an error on their remove callback (a futile effort, but good to catch). All of these have been in linux-next for a while now, and the regressions have gone away with the revert of the fw_devlink change" * tag 'driver-core-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (35 commits) Revert "driver core: Set fw_devlink=on by default" of: property: fw_devlink: Ignore interrupts property for some configs debugfs: do not attempt to create a new file before the filesystem is initalized debugfs: be more robust at handling improper input in debugfs_lookup() driver core: auxiliary bus: Fix calling stage for auxiliary bus init of: irq: Fix the return value for of_irq_parse_one() stub of: irq: make a stub for of_irq_parse_one() clk: Mark fwnodes when their clock provider is added/removed PM: domains: Mark fwnodes when their powerdomain is added/removed irqdomain: Mark fwnodes when their irqdomain is added/removed driver core: fw_devlink: Handle suppliers that don't use driver core of: property: Add fw_devlink support for optional properties driver core: Add fw_devlink.strict kernel param of: property: Don't add links to absent suppliers driver core: fw_devlink: Detect supplier devices that will never be added driver core: platform: Emit a warning if a remove callback returned non-zero of: property: Fix fw_devlink handling of interrupts/interrupts-extended gpiolib: Don't probe gpio_device if it's not the primary device device.h: Remove bogus "the" in kerneldoc gpiolib: Bind gpio_device to a driver to enable fw_devlink=on by default ... |
|
Linus Torvalds | 882d6edfc4 |
gpio updates for v5.12
- new driver for the Toshiba Visconti platform - rework of interrupt handling in gpio-tegra - updates for GPIO selftests: we're now using the character device to perform the subsystem checks - support for a new rcar variant + some code refactoring - refactoring of gpio-ep93xx - SPDX License identifier has been updated in the uapi header so that userspace programs bundling it can become fully REUSE-compliant - improvements to pwm handling in gpio-mvebu - support for interrupt handling and power management for gpio-xilinx as well as some code refactoring - support for a new chip variant in gpio-pca953x - removal of drivers: zte xs & intel-mid and removal of leftovers from intel-msic - impovements to intel drivers pulled from Andy Shevchenko - improvements to the gpio-aggregator virtual GPIO driver - and several minor tweaks and fixes to code and documentation all over the place -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmAzzkgACgkQEacuoBRx 13K9xA//ZjxuUdX+q3tcfcljMrSAYWVK0PwxiHtjMRCcMX5Mkg/VP0Aqig0/CAWv b/98JNBLX8GxWhy4WlIVgkK2NZTrPAs3c1sYxufb7AgqmhOaqA6d1xZ0oYdhPykc H5yy55AEhiNMZCwEFWJXZSisWKsZ+Nnz+XZl5wWEsTWcvQgOGveK/+nxk//UW2Kj ymtO4LnivC7vABd/gBSZshJwjE45/os8QBS2HTKw3bcHa7p9Sd72e0zYthXzIS9J nECOSBdHMnfcIthFrQWXOXZz72xf3KjpoouztDEKqTOVFUplxQ0BxgwfrjjNd3qJ sHXtIzb3ZsGXc8yDoSmSE7ahspsP/x/uYfTxDr7dn9m9obSTWwy5vXK9xJaGGk0r TLnPZTESXqu/Eoek22ll7345RNSFlz8g0bCbO1avdtWYTxg/oaWxr1SEvznEiDZ5 I36K8XGPye1P2dZ3v08cjIUW6QGx9HEZmN3Djzh/pnMvhF72BDy/fipR4fnIJGOc ptmrHK0BWvU0fyj58TqeOXkafAulrqoKIu5sOTEkVUQlRqVF6E7pp5/KcxJv8xJs zbcmu/26MYkJYeo/AGpshhTD6EDnKnlab1VHrHgSkA5zKdVghRqqd4EGyRKUyQ5e WxEpPPG67RUIAZrmqA3eYMWncUhvD1LRTILN8ZLPlES1/9YUlIE= =OZtR -----END PGP SIGNATURE----- Merge tag 'gpio-updates-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: "It's been a relatively calm release cycle and we're actually removing more code than we're adding. Summary: - new driver for the Toshiba Visconti platform - rework of interrupt handling in gpio-tegra - updates for GPIO selftests: we're now using the character device to perform the subsystem checks - support for a new rcar variant + some code refactoring - refactoring of gpio-ep93xx - SPDX License identifier has been updated in the uapi header so that userspace programs bundling it can become fully REUSE-compliant - improvements to pwm handling in gpio-mvebu - support for interrupt handling and power management for gpio-xilinx as well as some code refactoring - support for a new chip variant in gpio-pca953x - removal of drivers: zte xs & intel-mid and removal of leftovers from intel-msic - impovements to intel drivers pulled from Andy Shevchenko - improvements to the gpio-aggregator virtual GPIO driver - and several minor tweaks and fixes to code and documentation all over the place" * tag 'gpio-updates-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (71 commits) gpio: pcf857x: Fix missing first interrupt gpio: ep93xx: refactor base IRQ number gpio: ep93xx: refactor ep93xx_gpio_add_bank gpio: ep93xx: Fix typo s/hierarchial/hierarchical gpio: ep93xx: drop to_irq binding gpio: ep93xx: Fix wrong irq numbers in port F gpio: uapi: use the preferred SPDX license identifier gpio: gpio-xilinx: Add check if width exceeds 32 gpio: gpio-xilinx: Add support for suspend and resume gpio: gpio-xilinx: Add interrupt support gpio: gpio-xilinx: Reduce spinlock array to array gpio: gpio-xilinx: Simplify with dev_err_probe() gpio: msic: Drop driver from Makefile gpio: wcove: Split out to_ireg() helper and deduplicate the code gpio: wcove: Switch to use regmap_set_bits(), regmap_clear_bits() gpio: wcove: Get rid of error prone casting in IRQ handler gpio: intel-mid: Remove driver for deprecated platform gpio: msic: Remove driver for deprecated platform gpio: aggregator: Remove trailing comma in terminator entries gpio: aggregator: Use compound literal from the header ... |
|
Linus Torvalds | f158bbee94 |
- Core Frameworks
- Standardise MFD_CELL_* helpers - New Drivers - Add support for Acer Iconia Tab A500 Embedded Controller - New Device Support - Add support for ROHM BD9574MWF to BD9571MWV - Add support for Intel Alder Lake PCH-P PCI to LPSS - Add support for Intel Alder Lake PCH-S PCI to LPSS - New Functionality - Support ACPI enumeration; arizona - Fix-ups - Managed resources; bd9571mwv - DT additions/fix-ups; bd9571mwv, iqs62x, max8997, gateworks-gsc, ene-kb930 - Convert to SPDX; bd9571mw - Fix return values/error handling; sunxi - Provide SOFTDEP; arizona - Make use of DIV_ROUND_UP; mcp-sa11x0 - Use generic APIs; arizona - Add MAC address sysfs entries; intel-m10-bmc - Trivial: Coding-style fix-ups; iqs62x - Trivial: Remove superflouous code; iqs62x - Clear-up naming conventions; iqs62x - Bug Fixes - Fix 'pointer from integer' error; altera-sysmgr - Convert SGI_MFD_IOC3 from tristate to bool; Kconfig - Fix interrupt handling; gateworks-gsc - Extend required delay; iqs62x - Do not use I2C polling during calibration; iqs62x - Do no adjust clock frequency during calibration; iqs62x - Fix use-after-free; wm831x-auxad -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmAr4agACgkQUa+KL4f8 d2GcqhAAkfGRWU7RVWlOK2NcYIDGiSU5kAJgirwIpDxkZM+kNjYITm+jt5JYBdIc B1ShJSgc3kgcs62nTUTqkGjL6IQyI6aPsI4oF57XnN6nmIGzSQ84cCSbBn7eXUIP wF2/4V0L+eE7i6TaZNcyZ4EltkKvo06MCs35eUATyFLB/9ZfhBCRjQlk5z4YOG6n Mc3VJiLSpNv8PWTL+tw76RMk8mScUFaKwra8fYK4OVG/zjJ43tsADu4G6gF7FkZE Erlp+fvFFmSR5STEri8cY0AFjHYHGWrST7lQ0HUsgM72A+TjFsy2X6WsDZzwVp+Z Ymk0T4NAQWJ/QBu2kwws0L2EieYTtzY1DjKJV6MIiwp1OWIK+TQGV9zPgkXFq404 Rcw6LZjkEgeMJFx/4ljK5xC/y6CKGguxrXCYDVj0aeU+OcC1nnjx9KJwYWCsfwWU 0QUIPK0Fy0m2L0Jy/MeDakHtdkPzBLWOe5ybE9EmY8EV+RUorH6bEWVA6cmsJNgq ycUlx8hK0nO+yIOMFua8Tk4+0gpcS9QrSGNoz3Iw/sZa6knX4vyvHxyebu/91qas VwnU//s8LzpeiYu8hsjlbZsZTlP4Gnc2QhaWW757hTwykwMjhlHLAo/CZ85LVzCg mmd1xybdMsQFAAoemp6D1HixLG/cMP5bflqCB+hZ8SUhHOiPZNU= =ieAS -----END PGP SIGNATURE----- Merge tag 'mfd-next-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Frameworks: - Standardise MFD_CELL_* helpers New Drivers: - Add support for Acer Iconia Tab A500 Embedded Controller New Device Support: - Add support for ROHM BD9574MWF to BD9571MWV - Add support for Intel Alder Lake PCH-P PCI to LPSS - Add support for Intel Alder Lake PCH-S PCI to LPSS New Functionality: - Support ACPI enumeration; arizona Fix-ups: - Managed resources; bd9571mwv - DT additions/fix-ups; bd9571mwv, iqs62x, max8997, gateworks-gsc, ene-kb930 - Convert to SPDX; bd9571mw - Fix return values/error handling; sunxi - Provide SOFTDEP; arizona - Make use of DIV_ROUND_UP; mcp-sa11x0 - Use generic APIs; arizona - Add MAC address sysfs entries; intel-m10-bmc - Trivial: Coding-style fix-ups; iqs62x - Trivial: Remove superflouous code; iqs62x - Clear-up naming conventions; iqs62x Bug Fixes: - Fix 'pointer from integer' error; altera-sysmgr - Convert SGI_MFD_IOC3 from tristate to bool; Kconfig - Fix interrupt handling; gateworks-gsc - Extend required delay; iqs62x - Do not use I2C polling during calibration; iqs62x - Do no adjust clock frequency during calibration; iqs62x - Fix use-after-free; wm831x-auxad" * tag 'mfd-next-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (32 commits) mfd: wm831x-auxadc: Prevent use after free in wm831x_auxadc_read_irq() mfd: iqs62x: Do not change clock frequency during ATI mfd: iqs62x: Do not poll during ATI mfd: iqs62x: Increase interrupt handler return delay mfd: iqs62x: Rename regmap_config struct mfd: iqs62x: Remove unused bit mask mfd: iqs62x: Remove superfluous whitespace above fallthroughs mfd: intel-lpss: Add Intel Alder Lake PCH-S PCI IDs mfd: intel-m10-bmc: Expose MAC address and count mfd: Add driver for Embedded Controller found on Acer Iconia Tab A500 dt-bindings: mfd: Add ENE KB930 Embedded Controller binding dt-bindings: mfd: gateworks-gsc: Add fan-tach mode mfd: intel-lpss: Add Intel Alder Lake PCH-P PCI IDs mfd: gateworks-gsc: Fix interrupt type mfd: Standardise MFD_CELL_* helper names mfd: mcp-sa11x0: Use DIV_ROUND_UP to calculate rw_timeout mfd: max8997: Add of_compatible to Extcon and Charger mfd_cell dt-bindings: mfd: Correct the node name of the panel LED mfd: sgi-ioc3: Turn Kconfig option into a bool mfd: altera-sysmgr: Fix physical address storing more ... |
|
Linus Torvalds | 32c080c4b5 |
Merge branch 'i2c/for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang: - mostly driver updates. Bigger ones for mlxcpld and iproc. But most of them are all over the place. - removal of the efm32, sirf, u300, and zte zx bus drivers because of platform removal. So, we have a pleasant diffstat this time. - first set of cleanups in the I2C core as preparation to increase maximum length of SMBus transfers to 255 (as specified in the new standard). Better documentation of struct i2c_msg and its flags stand out here. - the testunit can now respond to SMBus block process calls which is the testcase when implementing the above new maximum length. * 'i2c/for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (62 commits) i2c: remove redundant error print in stm32f7_i2c_probe i2c: testunit: add support for block process calls i2c: busses: Replace spin_lock_irqsave with spin_lock in hard IRQ dt-bindings: eeprom: at24: Document ROHM BR24G01 i2c: i801: Add support for Intel Alder Lake PCH-P i2c: mv64xxx: Fix check for missing clock after adding RPM i2c: mux: mlxcpld: Add callback to notify mux creation completion i2c: mux: mlxcpld: Extend supported mux number i2c: mux: mlxcpld: Extend driver to support word address space devices i2c: mux: mlxcpld: Get rid of adapter numbers enforcement i2c: mux: mlxcpld: Prepare mux selection infrastructure for two-byte support i2c: mux: mlxcpld: Convert driver to platform driver i2c: imx: Synthesize end of transaction events without idle interrupts i2c: i2c-qcom-geni: Add shutdown callback for i2c i2c: mv64xxx: Add runtime PM support i2c: amd-mp2: Remove unused macro i2c: amd-mp2: convert to PCI logging functions i2c: mux: mlxcpld: Move header file out of x86 realm platform/x86: mlxcpld: Update module license i2c: mux: mlxcpld: Update module license ... |
|
Linus Torvalds | 983e4adae0 |
platform-drivers-x86 for v5.12-1
- Microsoft Surface devices System Aggregator Module support - SW_TABLET_MODE reporting improvements - thinkpad_acpi keyboard language setting support - platform / DPTF profile settings support - Base / userspace API parts merged from Rafael's acpi-platform branch - thinkpad_acpi and ideapad-laptop support through pdx86 - Remove support for some obsolete Intel MID platforms through merging of the shared intel-mid-removal branch - Big cleanup of the ideapad-laptop driver - Misc. other fixes / new hw support / quirks The following is an automated git shortlog grouped by driver: ACPI: - platform-profile: Fix possible deadlock in platform_profile_remove() - platform-profile: Introduce object pointers to callbacks - platform-profile: Drop const qualifier for cur_profile - platform: Add platform profile support Documentation: - Add documentation for new platform_profile sysfs attribute Documentation/ABI: - sysfs-platform-ideapad-laptop: conservation_mode attribute - sysfs-platform-ideapad-laptop: update device attribute paths Kconfig: - add missing selects for ideapad-laptop MAINTAINERS: - update email address for Henrique de Moraes Holschuh Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans: - Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans Merge remote-tracking branch 'linux-pm/acpi-platform' into review-hans: - Merge remote-tracking branch 'linux-pm/acpi-platform' into review-hans Merge tag 'ib-drm-gpio-pdx86-rtc-wdt-v5.12-1' into for-next: - Merge tag 'ib-drm-gpio-pdx86-rtc-wdt-v5.12-1' into for-next Move all dell drivers to their own subdirectory: - Move all dell drivers to their own subdirectory Platform: - OLPC: Constify static struct regulator_ops - OLPC: Specify the enable time - OLPC: Remove dcon_rdev from olpc_ec_priv - OLPC: Fix probe error handling Revert "platform/x86: - ideapad-laptop: Switch touchpad attribute to be RO" acer-wmi: - Don't use ACPI_EXCEPTION() amd-pmc: - put device on error paths - Fix CONFIG_DEBUG_FS check dell-wmi-sysman: - fix a NULL pointer dereference docs: - driver-api: Add Surface Aggregator subsystem documentation drm/gma500: - Get rid of duplicate NULL checks - Convert to use new SCU IPC API gpio: - msic: Remove driver for deprecated platform - intel-mid: Remove driver for deprecated platform hp-wmi: - Disable tablet-mode reporting by default - Don't log a warning on HPWMI_RET_UNKNOWN_COMMAND errors i2c-multi-instantiate: - Don't create platform device for INT3515 ACPI nodes ideapad-laptop: - add "always on USB charging" control support - add keyboard backlight control support - send notification about touchpad state change to sysfs - fix checkpatch warnings, more consistent style - change 'cfg' debugfs file format - change 'status' debugfs file format - check for touchpad support in _CFG - check for Fn-lock support in HALS - rework is_visible() logic - rework and create new ACPI helpers - group and separate (un)related constants into enums - misc. device attribute changes - always propagate error codes from device attributes' show() callback - convert ACPI helpers to return -EIO in case of failure - use dev_{err,warn} or appropriate variant to display log messages - use msecs_to_jiffies() helper instead of hand-crafted formula - use for_each_set_bit() helper to simplify event processing - use kobj_to_dev() - use device_{add,remove}_group - use sysfs_emit() - add missing call to submodule destructor - sort includes lexicographically - use appropriately typed variable to store the return value of ACPI methods - remove unnecessary NULL checks - remove unnecessary dev_set_drvdata() call - DYTC Platform profile support - Disable touchpad_switch for ELAN0634 intel-vbtn: - Eval VBDL after registering our notifier - Add alternative method to enable switches - Create 2 separate input-devs for buttons and switches - Rework wakeup handling in notify_handler() - Drop HP Stream x360 Convertible PC 11 from allow-list - Support for tablet mode on Dell Inspiron 7352 intel_mid_powerbtn: - Remove driver for deprecated platform - Remove driver for deprecated platform intel_mid_thermal: - Remove driver for deprecated platform - Remove driver for deprecated platform intel_pmt: - Make INTEL_PMT_CLASS non-user-selectable intel_pmt_crashlog: - Add dependency on MFD_INTEL_PMT intel_pmt_telemetry: - Add dependency on MFD_INTEL_PMT intel_scu_ipc: - Increase virtual timeout from 3 to 5 seconds intel_scu_wdt: - Drop mistakenly added const - Get rid of custom x86 model comparison - Drop SCU notification - Move driver from arch/x86 msi-wmi: - Fix variable 'status' set but not used compiler warning platform/surface: - aggregator: Fix access of unaligned value - Add Surface Hot-Plug driver - surface3-wmi: Fix variable 'status' set but not used compiler warning - aggregator: Fix braces in if condition with unlikely() macro - aggregator: Fix kernel-doc references - aggregator: fix a kernel-doc markup - aggregator_cdev: Add comments regarding unchecked allocation size - aggregator_cdev: Fix access of uninitialized variables - fix potential integer overflow on shift of a int - Add Surface ACPI Notify driver - Add Surface Aggregator user-space interface - aggregator: Add dedicated bus and device type - aggregator: Add error injection capabilities - aggregator: Add trace points - aggregator: Add event item allocation caching - aggregator: Add control packet allocation caching - Add Surface Aggregator subsystem - SURFACE_PLATFORMS should depend on ACPI - surface_gpe: Fix non-PM_SLEEP build warnings platform/x86/intel-uncore-freq: - Add Sapphire Rapids server support rtc: - mrst: Remove driver for deprecated platform sony-laptop: - Remove unneeded semicolon thinkpad_acpi: - Replace ifdef CONFIG_ACPI_PLATFORM_PROFILE with depends on - Fix 'warning: no previous prototype for' warnings - Add platform profile support - fixed warning and incorporated review comments - rectify length of title underline - Don't register keyboard_lang unnecessarily - set keyboard language - Add P53/73 firmware to fan_quirk_table for dual fan control - correct palmsensor error checking tools/power/x86/intel-speed-select: - Update version to 1.8 - Add new command to get/set TRL - Add new command turbo-mode - Set higher of cpuinfo_max_freq or base_frequency - Set scaling_max_freq to base_frequency touchscreen_dmi: - Add info for the Jumper EZpad 7 tablet - Add swap-x-y quirk for Goodix touchscreen on Estar Beauty HD tablet watchdog: - intel-mid_wdt: Postpone IRQ handler registration till SCU is ready - intel_scu_watchdog: Remove driver for deprecated platform -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmAqZ5cUHGhkZWdvZWRl QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zmuwf/XLoZzs6oW7Ps9DhkyU5lk7D79rti DY4AabVnWZhJ+Yl5+qMCTjC0R0nJYoq9PCDU5q20HHSFq7PXV0fPEVo7ZOp8tPng wdzb2glbtGjSWksjj3c8eB/jjPP0tpsWptH+9jlTv9yXwQNVh/rPVltmD+z8y69U qNzySltQMtoKmQKNbktUeHA12jBldnH+QlkL8KUp5ZEVDd7gukkmAovpzEcnwk5U lrza7I52c9Ggu1pD2OCX7an9tk6N7mQ6Rk2/c6GzRsOYa6SC5Aj7fi2bs0LRdGGx Kz/gtKS3dRIreEs4LGmL8byVi7a/YvCQoTfO+MxKq/btedBwxO2edDDsRg== =B+Fz -----END PGP SIGNATURE----- Merge tag 'platform-drivers-x86-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: "Highlights: - Microsoft Surface devices System Aggregator Module support - SW_TABLET_MODE reporting improvements - thinkpad_acpi keyboard language setting support - platform / DPTF profile settings support: - Base / userspace API parts merged from Rafael's acpi-platform branch - thinkpad_acpi and ideapad-laptop support through pdx86 - Remove support for some obsolete Intel MID platforms through merging of the shared intel-mid-removal branch - Big cleanup of the ideapad-laptop driver - Misc other fixes / new hw support / quirks" * tag 'platform-drivers-x86-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (99 commits) platform/x86: intel_scu_ipc: Increase virtual timeout from 3 to 5 seconds platform/surface: aggregator: Fix access of unaligned value tools/power/x86/intel-speed-select: Update version to 1.8 tools/power/x86/intel-speed-select: Add new command to get/set TRL tools/power/x86/intel-speed-select: Add new command turbo-mode Platform: OLPC: Constify static struct regulator_ops platform/surface: Add Surface Hot-Plug driver platform/x86: intel_scu_wdt: Drop mistakenly added const platform/x86: Kconfig: add missing selects for ideapad-laptop platform/x86: acer-wmi: Don't use ACPI_EXCEPTION() platform/x86: thinkpad_acpi: Replace ifdef CONFIG_ACPI_PLATFORM_PROFILE with depends on platform/x86: thinkpad_acpi: Fix 'warning: no previous prototype for' warnings platform/x86: msi-wmi: Fix variable 'status' set but not used compiler warning platform/surface: surface3-wmi: Fix variable 'status' set but not used compiler warning platform/x86: Move all dell drivers to their own subdirectory Documentation/ABI: sysfs-platform-ideapad-laptop: conservation_mode attribute Documentation/ABI: sysfs-platform-ideapad-laptop: update device attribute paths platform/x86: ideapad-laptop: add "always on USB charging" control support platform/x86: ideapad-laptop: add keyboard backlight control support platform/x86: ideapad-laptop: send notification about touchpad state change to sysfs ... |
|
Maxim Kiselev | a8002a3593 |
gpio: pcf857x: Fix missing first interrupt
If no n_latch value will be provided at driver probe then all pins will
be used as an input:
gpio->out = ~n_latch;
In that case initial state for all pins is "one":
gpio->status = gpio->out;
So if pcf857x IRQ happens with change pin value from "zero" to "one"
then we miss it, because of "one" from IRQ and "one" from initial state
leaves corresponding pin unchanged:
change = (gpio->status ^ status) & gpio->irq_enabled;
The right solution will be to read actual state at driver probe.
Cc: stable@vger.kernel.org
Fixes:
|
|
Nikita Shubin | 35d9e69592 |
gpio: ep93xx: refactor base IRQ number
- use predefined constants instead of plain numbers - use provided bank IRQ number instead of defined constant for port F Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> |
|
Nikita Shubin | f6b6154186 |
gpio: ep93xx: refactor ep93xx_gpio_add_bank
- replace plain numbers with girq->num_parents in devm_kcalloc - replace plain numbers with girq->num_parents for port F - refactor i - 1 to i + 1 to make loop more readable - combine getting IRQ's loop and setting handler's into single loop Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> |
|
Nikita Shubin | 78f85c73e6 |
gpio: ep93xx: Fix typo s/hierarchial/hierarchical
Fix typo in comment. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> |