Commit Graph

376 Commits

Author SHA1 Message Date
Hartmut Knaack 25fcf2b7f1 gpio-pca953x: fix gpio_base
gpio_base was set to 0 if no system platform data or open firmware
platform data was provided. This led to conflicts, if any other gpiochip
with a gpiobase of 0 was instantiated already. Setting it to -1 will
automatically use the first one available.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-13 13:49:37 -06:00
Janusz Krzysztofik 78a4315872 gpio/omap: fix build error with certain OMAP1 configs
With commit f64ad1a0e2, "gpio/omap: cleanup _set_gpio_wakeup(), remove
ifdefs", access to build time conditionally omitted 'suspend_wakeup'
member of the 'gpio_bank' structure has been placed unconditionally in
function _set_gpio_wakeup(), which is always built. This resulted in the
driver compilation broken for certain OMAP1, i.e., non-OMAP16xx,
configurations.

Really required or not in previously excluded cases, define this
structure member unconditionally as a fix.

Tested with a custom OMAP1510 only configuration.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: Kevin Hilman <khilman@ti.com>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-13 11:48:25 -06:00
Russell King 4f5b04800a drivers/gpio/gpio-generic.c: fix build errors
Building a kernel with hotplug disabled results in a link failure:

  `bgpio_remove' referenced in section `___ksymtab_gpl+bgpio_remove' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o

This is because of bgpio_remove() is exported.  It is illegal to export
symbols which are discarded either at link time or as part of an
init/exit section.

Fix this by dropping the __devexit attributation from bgpio_remove().
Also drop the __devinit attributation from bgpio_init().

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-14 18:09:38 -07:00
Linus Torvalds 4a2d732f5d Merge branch 'gpio/next' of git://git.secretlab.ca/git/linux-2.6
* 'gpio/next' of git://git.secretlab.ca/git/linux-2.6:
  gpio_msm: Move Qualcomm MSM v2 gpio driver into drivers
  gpio_msm: Move Qualcomm v6 MSM driver into drivers
  msm: gpio: Fold register defs into C file
  msm: gpiomux: Move public API to public header
  msm: gpio: Remove ifdefs on gpio chip registers
  msm: gpio: Remove chip-specific register definitions
  msm: Remove chip-ifdefs for GPIO io mappings
  msm: gpio: Remove unsupported devices
  gpio: ab8500: fix MODULE_ALIAS for ab8500
  of/gpio: export of_gpio_simple_xlate
2011-08-01 06:13:48 -10:00
Grant Likely 867f503d58 Merge branch 'msm-move-gpio' of git://codeaurora.org/quic/kernel/davidb/linux-msm into gpio/next
Conflicts:
	drivers/gpio/Kconfig
	drivers/gpio/Makefile
2011-08-01 15:16:05 +01:00
David Brown 1a5ab4b3e6 gpio_msm: Move Qualcomm MSM v2 gpio driver into drivers
Migrate the driver for the v7-based MSM chips into drivers/gpio.  The
driver is unchanged, only moved.

Change-Id: I810db5b50b71cdca4e869aa0d0310f7f48781a55
Signed-off-by: David Brown <davidb@codeaurora.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-08-01 04:58:00 -07:00
David Brown 74d10d7461 gpio_msm: Move Qualcomm v6 MSM driver into drivers
Migrate the driver for the v6-based MSM chips into drivers/gpio.  The
driver is unchanged, only moved.

Change-Id: I03ba597b95b4d62b42da112a8efac88d67aa40f9
Signed-off-by: David Brown <davidb@codeaurora.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-08-01 04:58:00 -07:00
Margarita Olaya 668a6cc710 tps65912: gpio: add gpio driver
TPS65912 has five GPIOs that can be configured for different
purposes.

Signed-off-by: Margarita Olaya Cabrera <magi@slimlogic.co.uk>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:22 +02:00
Axel Lin 5b8ce5eb81 gpio: ab8500: fix MODULE_ALIAS for ab8500
Since 43cc71eed1 (platform: prefix MODALIAS
with "platform:"), the platform modalias is prefixed with "platform:".

This patch changes the MODULE_ALIAS to "platform:ab8500-gpio".

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-28 16:19:23 -06:00
Linus Torvalds d3ec4844d4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
  fs: Merge split strings
  treewide: fix potentially dangerous trailing ';' in #defined values/expressions
  uwb: Fix misspelling of neighbourhood in comment
  net, netfilter: Remove redundant goto in ebt_ulog_packet
  trivial: don't touch files that are removed in the staging tree
  lib/vsprintf: replace link to Draft by final RFC number
  doc: Kconfig: `to be' -> `be'
  doc: Kconfig: Typo: square -> squared
  doc: Konfig: Documentation/power/{pm => apm-acpi}.txt
  drivers/net: static should be at beginning of declaration
  drivers/media: static should be at beginning of declaration
  drivers/i2c: static should be at beginning of declaration
  XTENSA: static should be at beginning of declaration
  SH: static should be at beginning of declaration
  MIPS: static should be at beginning of declaration
  ARM: static should be at beginning of declaration
  rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check
  Update my e-mail address
  PCIe ASPM: forcedly -> forcibly
  gma500: push through device driver tree
  ...

Fix up trivial conflicts:
 - arch/arm/mach-ep93xx/dma-m2p.c (deleted)
 - drivers/gpio/gpio-ep93xx.c (renamed and context nearby)
 - drivers/net/r8169.c (just context changes)
2011-07-25 13:56:39 -07:00
Linus Torvalds c7c8518498 Merge branch 'gpio/next' of git://git.secretlab.ca/git/linux-2.6
* 'gpio/next' of git://git.secretlab.ca/git/linux-2.6: (61 commits)
  gpio/mxc/mxs: fix build error introduced by the irq_gc_ack() renaming
  mcp23s08: add i2c support
  mcp23s08: isolate spi specific parts
  mcp23s08: get rid of setup/teardown callbacks
  gpio/tegra: dt: add binding for gpio polarity
  mcp23s08: remove unused work queue
  gpio/da9052: remove a redundant assignment for gpio->da9052
  gpio/mxc: add device tree probe support
  ARM: mxc: use ARCH_NR_GPIOS to define gpio number
  gpio/mxc: get rid of the uses of cpu_is_mx()
  gpio/mxc: add missing initialization of basic_mmio_gpio shadow variables
  gpio: Move mpc5200 gpio driver to drivers/gpio
  GPIO: DA9052 GPIO module v3
  gpio/tegra: Use engineering names in DT compatible property
  of/gpio: Add new method for getting gpios under different property names
  gpio/dt: Refine GPIO device tree binding
  gpio/ml-ioh: fix off-by-one for displaying variable i in dev_err
  gpio/pca953x: Deprecate meaningless device-tree bindings
  gpio/pca953x: Remove dynamic platform data pointer
  gpio/pca953x: Fix IRQ support.
  ...
2011-07-22 14:50:57 -07:00
Shawn Guo 591567a5ea gpio/mxc/mxs: fix build error introduced by the irq_gc_ack() renaming
The following commit renames irq_gc_ack() to irq_gc_ack_set_bit(),
and makes gpio-mxc and gpio-mxs fail to build.

  659fb32d1b
  genirq: replace irq_gc_ack() with {set,clr}_bit variants (fwd)

The patch fixed a couple of typo of comma to semicolon.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-19 13:10:02 -06:00
Axel Lin 164d5c3988 gpio: wm831x: add a missing break in wm831x_gpio_dbg_show
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-15 14:03:30 -06:00
Peter Korsgaard 752ad5e82d mcp23s08: add i2c support
Add i2c bindings for the mcp230xx devices. This is quite a lot simpler
than the spi one as there's no funky sub addressing done (one struct
i2c_client per struct gpio_chip).

The mcp23s08_platform_data structure is reused for i2c, even though
only a single mcp23s08_chip_info structure is needed.

To use, simply fill out a platform_data structure and pass it in
i2c_board_info, E.G.:

static const struct mcp23s08_platform_data mcp23017_data = {
	.chip[0] = {
		.pullups = 0x00ff,
	},
	.base = 240,
};

static struct i2c_board_info __initdata i2c_devs[] = {
	{ I2C_BOARD_INFO("mcp23017", 0x20),
	  .platform_data = &smartview_mcp23017_data, },
	...
};

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-15 13:54:18 -06:00
Peter Korsgaard d62b98f305 mcp23s08: isolate spi specific parts
Change spi member of struct mcp23s08 to be a ops-specific opaque data
pointer, and move spi specific knowledge out of mcp23s08_probe_one().

No functional change, but is needed to add i2c support.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-15 13:54:18 -06:00
Peter Korsgaard 1bb6f9b042 mcp23s08: get rid of setup/teardown callbacks
There's no in-tree users, and bus notifiers are more generic anyway.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-15 13:54:17 -06:00
Peter Korsgaard 8ff37c38a2 mcp23s08: remove unused work queue
Never accessed anywhere.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-14 19:44:10 -06:00
Axel Lin cd27918dc9 gpio/da9052: remove a redundant assignment for gpio->da9052
We just set it twice in da9052_gpio_probe.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-14 12:41:53 +09:00
Jiri Kosina b7e9c223be Merge branch 'master' into for-next
Sync with Linus' tree to be able to apply pending patches that
are based on newer code already present upstream.
2011-07-11 14:15:55 +02:00
Shawn Guo 8937cb602b gpio/mxc: add device tree probe support
The patch adds device tree probe support for gpio-mxc driver.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-08 12:38:18 -06:00
Shawn Guo e7fc6ae744 gpio/mxc: get rid of the uses of cpu_is_mx()
The patch removes all the uses of cpu_is_mx().  Instead, it utilizes
platform_device_id to distinguish the different gpio types, IMX1_GPIO
on i.mx1, IMX21_GPIO on i.mx21 and i.mx27, IMX31_GPIO on all other
i.mx SoCs.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-08 12:38:12 -06:00
Mathias Nyman 2345b20fd9 gpio/langwell_gpio: ack the correct bit for langwell gpio interrupts
The wrong bit was masked when acking langwell gpio interrupts.

Reason for maskig the wrong bit was probably because__ffs() and ffs() functions
return bit indexes differently (0..31 vs 1..32)

This fixes langwell based devices from hanging when a gpio interrupt is
triggered and undoes the breakage which occurred in change set
732063b92b

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-08 09:32:01 -06:00
Lothar Waßmann fb14921862 gpio/mxc: add missing initialization of basic_mmio_gpio shadow variables
The bgpio_init() function does not initialise the shadow register for
the GPIO direction register. Thus, when configuring the first GPIO with
gpio_set_direction() all other GPIOs of the same bank will be
configured as inputs. Since the bgpio layer cannot know whether the
register is readable, the initialisation should be done by the caller
of bgpio_init().

Also, the 'data' shadow variable that is used inside basic_mmio_gpio
to cache the current value of the GPIO_DR register is initialised from
the GPIO_PSR register within bgpio_init(). Thus when setting the
output value of a certain GPIO, the other GPIO outputs of the same
bank will be set or cleared depending on the pin state of the GPIO
inputs during bgpio_init().

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-07 12:42:50 -06:00
Michael Büsch eb032b9837 Update my e-mail address
Signed-off-by: Michael Buesch <m@bues.ch>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-07 15:18:01 +02:00
Grant Likely 6eae1ace68 gpio: Move mpc5200 gpio driver to drivers/gpio
GPIO drivers are getting consolidated into drivers/gpio.  While at it,
change the driver name to mpc5200-gpio* to avoid collisions.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-06 11:57:15 -06:00
ashishj3 07bfc91523 GPIO: DA9052 GPIO module v3
DA9052 PMIC has 16 bit GPIO bus for peripheral control.

This patch add support for the GPIO pins on the DA9052.

Signed-off-by: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-06 10:31:58 -06:00
Stephen Warren f7f678a063 gpio/tegra: Use engineering names in DT compatible property
Engineering names are more stable than marketing names. Hence, use them
for Device Tree compatible properties instead.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-05 23:36:32 -06:00
Axel Lin 58956ba23e gpio: tps65910: add missing breaks in tps65910_gpio_init
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-05 23:17:08 -06:00
Vitaliy Ivanov e44ba033c5 treewide: remove duplicate includes
Many stupid corrections of duplicated includes based on the output of
scripts/checkincludes.pl.

Signed-off-by: Vitaliy Ivanov <vitalivanov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-20 16:08:19 +02:00
Axel Lin 33300571b1 gpio/ml-ioh: fix off-by-one for displaying variable i in dev_err
with the "for (; i != 0; i--)" sytax, i-- will be executed after the iteration.
thus dev_err shows wrong i value.
Switch to "while(--i >= 0)" which is better in readability.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-16 13:44:29 -06:00
David Jander a57339b4b5 gpio/pca953x: Deprecate meaningless device-tree bindings
The property 'polarity' is handled by the GPIO core, and the 'gpio-base'
should be assigned automatically. It is meaningless in the device-tree,
since GPIO's are identified by the "chip-name"/offset pair.
This way, the whole pca953x_get_alt_pdata() can hopefully soon go away.
We still need to check whether we really want GPIO-interrupt functionality
by simply looking if the I2C node has an interrupts property defined, since
this property is not used for anything else.

Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-16 13:41:50 -06:00
David Jander c6dcf59243 gpio/pca953x: Remove dynamic platform data pointer
In the case that we obtain device-tree data to fill in platform_data, the new
platform data struct was dynamically allocated, but the pointer to it was not
used everywhere it should. It seems easier to fix this issue by removing the
dynamic allocation altogether since its data is only used during driver
probing.

Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-16 13:41:49 -06:00
David Jander c609c05db1 gpio/pca953x: Fix IRQ support.
It seems that in the normal case, IRQ_NOREQUEST needs to be explicitly
cleared, otherwise claiming the interrupt fails.
In the case of sparse interrupts, the descriptor needs to be allocated
first.

Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-16 13:41:48 -06:00
Grant Likely 8e46ea3ec8 Merge branch 'for_3.1/gpio-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into gpio/next 2011-06-16 13:31:42 -06:00
Kevin Hilman e5ff4440cf gpio/omap: cleanup show revision, remove cpu_is checks, display only once
Remove cpu_is_* checks from gpio_show_revision() by passing in the
revision address offset from platform data.  SoCs with no revision
register (15xx, 7xx, and all MPUIOs) use -1 (actually, USHRT_MAX) to
signify no register.

While here, all GPIO banks are assumed to be the same revision, so fix
show_revision() to only show the revision for the first bank it finds.
This removes duplicate GPIO revision prints during boot.

Thanks to Charulatha V <charu@ti.com> for finding/fixing a few -1s
that were missed in the original patch.

Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-06-16 11:14:13 -07:00
Kevin Hilman 9942da0e4b gpio/omap: debounce remove SoC specific registers, use pdata
Use register offsets passed in from pdata for accessing debounce registers.

Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-06-16 11:14:09 -07:00
Kevin Hilman f64ad1a0e2 gpio/omap: cleanup _set_gpio_wakeup(), remove ifdefs
Make _set_gpio_wakeup() generic by removing ifdefs.  Code for the
various SoCs/bank-methods was already the same, except for the
non-wakeup GPIO checking.  But that flag is set on a per-SoC basis, so
can be used for all SoCs.

While here, use dev_err() and remove GPIO bank calculation assumption
based on subtracting bank pointers.

Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-06-16 11:14:05 -07:00
Kevin Hilman 7a6f8416e2 gpio/omap: remove useless gpio_valid() & check_gpio() checks
These functions are useless.  They are only called in a few places,
and where they are called, the GPIO has already been converted from an
IRQ or masked, so these functions will never fail.

Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-06-16 11:14:00 -07:00
Kevin Hilman f8b46b5834 gpio/omap: convert MPUIO IRQ over to generic irq_chip
MPUIO banks have their own dedicated IRQ chip interface, separate from
the "normal" GPIO banks.   Convert the MPUIO IRQ chip over to using
the new generic IRQ chip interface.

Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-06-16 11:13:54 -07:00
Kevin Hilman 28f3b5a073 gpio/omap: conslidate enable/disable of GPIO IRQs, remove ifdefs
Cleanup GPIO IRQ enable/disable handling by removing SoC-specific

Also split enable/disable IRQ into separate functions for better
readability and also facilitate potentially moving to generic irq_chip
in the future.

Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-06-16 11:13:51 -07:00
Kevin Hilman eef4bec7bf gpio/omap: consolidate IRQ status handling, remove #ifdefs
Cleanup IRQ status handling by passing IRQ status register offsets
via platform data.

Cleans up clearing of GPIO IRQ status and GPIO ISR handler.

Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-06-16 11:13:46 -07:00
Kevin Hilman fa87931acb gpio/omap: consolidate direction, input, output, remove #ifdefs
Add register offset fields to GPIO platform_data for registers.

This patch adds registers that control direction, input and output
data.  Using these register offsets in the common driver allows
removal of #ifdefs and greatly improves readability.

Also create dedicated data out functions: one for banks with dedicated
set/clear registers, and another for banks with a single mask
register.

Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-06-16 11:13:42 -07:00
Charulatha V a8be8dafd0 gpio/omap: remove get_gpio_bank()
use chip info to get the pointer to the struct gpio_bank for a
given GPIO bank and remove get_gpio_bank().

Signed-off-by: Charulatha V <charu@ti.com>
2011-06-16 11:13:37 -07:00
Kevin Hilman 129fd22307 gpio/omap: replace get_gpio_index() by using bank width
The get_gpio_index() function, littered with cpu_is_* checks can be easily
replaced by using bitops based on the GPIO bank width.  Do so.

Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-06-16 11:13:32 -07:00
Kevin Hilman c390aad033 gpio/omap: _get_gpio_irqbank_mask: replace hard-coded mask with bank->width
Replace hard-coded mask values with bank->width which is already coming
from platform_data.

Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-06-16 11:13:18 -07:00
Kevin Hilman d5f46247e7 gpio/omap: move bank width into struct gpio_bank
Rather than having a file-global bank_width variable, move it into
struct gpio_bank so it can be bank-specific.   Note the bank width
is already passed per-bank via platform_data, so current code would
be incorrect if any banks had different width.

Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-06-16 11:13:13 -07:00
Kevin Hilman bdba15db4d gpio/omap: remove MPUIO handling from _clear_gpio_irqbank()
Remove the OMAP1 #ifdef and MPUIO special case for _clear_gpio_irqbank()

The MPUIOs do not need a register access to ack/clear the IRQ status,
since reading the IRQ status clears it.  In addition, the MPUIO
irq_chip has an empty ack method, so _clear_gpio_irqbank() is never
used for MPUIOs.

Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-06-16 11:13:02 -07:00
Kevin Hilman df3c851716 gpio/omap: _clear_gpio_irqbank: fix flushing of posted write
In commit 78a1a6d341 (ARM: OMAP4: Update
the GPIO support) braces were mistakenly added to included the
register read-back inside the cpu_is_* checking.

Remove the braces, ensuring that a register read-back is done, even
when the IRQSTATUS2 register is not written.

Note that the register read-back might be IRQSTATUS1 or IRQSTATUS2
depending on the CPU, but a read-back of any register in that region
will cause a flush of the posted writes.

Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-06-16 11:12:42 -07:00
Ambresh K 55b220cafa gpio/omap4: Fix missing interrupts during device wakeup due to IOPAD.
If gpio pins from bank[2-5] are marked as wakeup enable and if the wake is
through gpio IO pad wakeup, then that wakeup gpio interrupt is lost.

In the current implementation, GPIO driver stores the context of DATAIN of
all the gpio in the bank. During GPIO resuming, it checks DATAIN with wakeup
enabled pins of gpio bank. If there is status change, then manually toggle
GPIO_LEVELDETECT to generate pseudo interrupt.

Reported-by: Philippe Mazet <p-mazet@ti.com>
Tested-by: Philippe Mazet <p-mazet@ti.com>
Signed-off-by: Ambresh K <ambresh@ti.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-16 08:40:43 -06:00
Grant Likely 2bc7c85210 Merge branch 'gpio/next-tegra' into gpio/next
Conflicts:
	drivers/gpio/Kconfig
	drivers/gpio/Makefile
2011-06-15 14:57:39 -06:00