The patch affect SMSC LAN generation 4 chips with integrated PHY (LAN9221).
It is possible that PHY could enter power-down mode (ENERGYON clear),
between ENERGYON bit check in smsc911x_phy_disable_energy_detect and SRST
bit set in smsc911x_soft_reset. This could happen, for example, if someone
disconnect ethernet cable between the checks. The PHY in a power-down mode
would prevent the MAC portion of chip to be software reseted.
Initially found by code review, confirmed later using test case.
This is low probability issue, and in order to reproduce it you have to
run the script:
while true; do
ifconfig eth0 down
ifconfig eth0 up || break
done
While the script is running you have to plug/unplug ethernet cable many
times (using gpio controlled ethernet switch, for example) until get:
[ 4516.477783] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4516.512207] smsc911x smsc911x.0: eth0: SMSC911x/921x identified at 0xce006000, IRQ: 336
[ 4516.524658] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4516.559082] smsc911x smsc911x.0: eth0: SMSC911x/921x identified at 0xce006000, IRQ: 336
[ 4516.571990] ADDRCONF(NETDEV_UP): eth0: link is not ready
ifconfig: SIOCSIFFLAGS: Input/output error
The patch was reviewed by Steve Glendinning and Microchip Team.
Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
Acked-by: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Refactored all macros used in cxgb4i as part of previously started cxgb4 macro
names cleanup. Makes them more uniform and avoids namespace collision.
Minor changes in other drivers where required as some of these macros are used
by multiple drivers, affected drivers are iw_cxgb4, cxgb4(vf) & csiostor
Signed-off-by: Anish Bhatt <anish@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes two issues after using iovec iterators:
- vlan_offset should be initialized to zero, otherwise unexpected offset
will be used in skb_copy_datagram_iter()
- advance iovec iterator when vnet_hdr_sz is greater than sizeof(gso), this
is the case when mergeable rx buffer were enabled for a virt guest.
Fixes e0b46d0ee9 ("tun: Use iovec iterators")
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/ipv4/fou.c: In function ‘ip_tunnel_encap_del_fou_ops’:
net/ipv4/fou.c:861:1: warning: no return statement in function returning non-void [-Wreturn-type]
Fixes: a8c5f90fb5 ("ip_tunnel: Ops registration for secondary encap (fou, gue)")
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
kick_requests() can put linger requests on the notarget list. This
means we need to clear the much-overloaded req->r_req_lru_item in
__unregister_linger_request() as well, or we get an assertion failure
in ceph_osdc_release_request() - !list_empty(&req->r_req_lru_item).
AFAICT the assumption was that registered linger requests cannot be on
any of req->r_req_lru_item lists, but that's clearly not the case.
Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Requests have to be unlinked from both osd->o_requests (normal
requests) and osd->o_linger_requests (linger requests) lists when
clearing req->r_osd. Otherwise __unregister_linger_request() gets
confused and we trip over a !list_empty(&osd->o_linger_requests)
assert in __remove_osd().
MON=1 OSD=1:
# cat remove-osd.sh
#!/bin/bash
rbd create --size 1 test
DEV=$(rbd map test)
ceph osd out 0
sleep 3
rbd map dne/dne # obtain a new osdmap as a side effect
rbd unmap $DEV & # will block
sleep 3
ceph osd in 0
Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
Reviewed-by: Alex Elder <elder@linaro.org>
TID of cap flush ack is 64 bits, but ceph_inode_info::flushing_cap_tid
is only 16 bits. 16 bits should be plenty to let the cap flush updates
pipeline appropriately, but we need to cast in the proper direction when
comparing these differently-sized versions. So downcast the 64-bits one
to 16 bits.
Reflects ceph.git commit a5184cf46a6e867287e24aeb731634828467cd98.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@redhat.com>
Things get calming down, now we have only a few fix patches:
a trivial fix for memory leak in usb-audio, a patch for the new
HD-audio PCI id, a device-specific mute-LED fix, and a slightly big
patch to cover the missing COEF inits of various Realtek codecs.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=EhoH
-----END PGP SIGNATURE-----
Merge tag 'sound-3.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Things get calming down, now we have only a few fix patches: a trivial
fix for memory leak in usb-audio, a patch for the new HD-audio PCI id,
a device-specific mute-LED fix, and a slightly big patch to cover the
missing COEF inits of various Realtek codecs"
* tag 'sound-3.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Add mute LED control for Lenovo Ideapad Z560
ALSA: hda/realtek - Change EAPD to verb control
ALSA: usb-audio: Fix memory leak in FTU quirk
ALSA: hda_intel: Add DeviceIDs for Sunrise Point-LP
Pull SELinux fixlet from James Morris:
"WARN_ONCE() here will unnecessarily terrify users"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
selinux: convert WARN_ONCE() to printk() in selinux_nlmsg_perm()
Pull audit fixes from Paul Moore:
"After he sent the initial audit pull request for 3.18, Eric asked me
to take over the management of the audit tree, hence this pull request
to fix a couple of problems with audit.
As you can see below, the changes are minimal: adding some whitespace
to a string so userspace parses it correctly, and fixing a problem
with audit's usage of fsnotify that was causing audit watch rules to
be lost. Neither of these patches were very controversial on the
mailing lists and they fix real problems, getting them into 3.18 would
be a good thing"
* 'stable-3.18' of git://git.infradead.org/users/pcmoore/audit:
audit: keep inode pinned
audit: AUDIT_FEATURE_CHANGE message format missing delimiting space
. stable fix for a dm-cache related bug in dm-btree walking code that
results from using very large fast device (e.g. 4T) with a very small
cache blocksize (e.g. 32K) -- this is a very uncommon configuration
. a couple fixes for dm-raid (one for stable and the other addresses a
crash in 3.18-rc1 code)
. stable fix for dm-thinp that addresses a very rare dm-bufio bug having
to do with memory reclaimation (via shrinker) when using dm-thinp
ontop of loopback devices
. fix a leak in dm-stripe target constructor's error path
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUY/p7AAoJEMUj8QotnQNaxPEIAJsmJC5ujQAIdm5yUxsOWruU
Y/36HbPvlmV8fgWqGyjaubBrzqgWry/yW/u/Sv9+9rE3Zh6JSVLVrCA6uZZ3Yr+j
HKYEPjm/O0zVJepfEDKtjG6dxeaql47+luwU1iP1bAYeZE3zmKn1oFT2GW5gTbxO
2n3MiN/dyX8v0cTw6r0O69luIAu93CSY0XDk+1ynfKlKKVmgcAUPvKuobF+yHXoF
Rd7KTqFoK6HgRhdUHvUQnCGDandZ9MHjt3oW9p3dv3ezvW1cNUARoVHMRGG6Awfu
WZkQ/VORDeaJT+bhjGfPIla1HbgxEKJrgzTUlpj+P6K2uPK2f6ECEyBpDLWKy9g=
=lkSu
-----END PGP SIGNATURE-----
Merge tag 'dm-3.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- stable fix for dm-thin that avoids normal IO racing with discard
- stable fix for a dm-cache related bug in dm-btree walking code that
results from using very large fast device (eg 4T) with a very small
cache blocksize (eg 32K) -- this is a very uncommon configuration
- a couple fixes for dm-raid (one for stable and the other addresses a
crash in 3.18-rc1 code)
- stable fix for dm-thinp that addresses a very rare dm-bufio bug
having to do with memory reclaimation (via shrinker) when using
dm-thinp ontop of loopback devices
- fix a leak in dm-stripe target constructor's error path
* tag 'dm-3.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm btree: fix a recursion depth bug in btree walking code
dm thin: grab a virtual cell before looking up the mapping
dm raid: fix inaccessible superblocks causing oops in configure_discard_support
dm raid: ensure superblock's size matches device's logical block size
dm bufio: change __GFP_IO to __GFP_FS in shrinker callbacks
dm stripe: fix potential for leak in stripe_ctr error path
Lenovo Ideapad Z560 has a mute LED that is controlled via EAPD pin
0x1b on CX20585 codec. (EAPD bit on corresponds to mute LED on.)
The machine doesn't need other EAPD, so the fixup concentrates on
controlling EAPD 0x1b following the vmaster state (but inversely).
Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=665315
Reported-by: Szymon Kowalczyk <fazerxlo@o2.pl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit f5866db6 (virtio_console: enable VQs early) tried to make
sure that DRIVER_OK was set when virtio_console started using its
virtqueues. Doing this in add_port(), however, means that we try
to set DRIVER_OK again when when a port is dynamically added after
the probe function is done.
Let's move virtio_device_ready() to the probe function just before
trying to use the virtqueues instead. This is fine as nothing can
fail inbetween.
Reported-by: Thomas Graf <tgraf@suug.ch>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With commit d75b1ade56 ("net: less interrupt masking in NAPI") napi
repoll is done only when work_done == budget. bcm_sysport_tx_poll()
always returns 0 whether or not we completed the poll quantum.
Fix this by returning either 0 when we did complete the TX ring reclaim,
or budget to trigger a repoll.
Fixes: d75b1ade56 ("net: less interrupt masking in NAPI")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With the commit d75b1ade56 ("net: less interrupt masking in NAPI") napi repoll
is done only when work_done == budget. In tx napi poll we always return 0.
So tx napi is not called again and we do not clean up the tx ring.
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the build failures that result from the use of pr_debug
without the referenced char * arrays being defined.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
calming down on the KVM front at last.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJUYhy6AAoJEL/70l94x66DZqoIAIw85ikZG9ZewjwbttRhQf/l
8a3iAzY3fChNDvJInVWpmpuZV3gkPcf0ISKvh5bh7VvirdxtpgaR+fTUeK7YxuNP
z8H6StnSM6rtmwsq5vwWWX6lCFOEEnkKJQidi51/o7G7O4EvxFwclTp3WKAeuPTs
7WmAnofDVUkfXK96DeoOKiWP7jkN97Q2lLcSaogP/jiKSKjMT95ZTA+E0fZNhE18
8pMZhrI7xrgEc0LQiEki8M9hNT+EBsZfhFjdLuuPP7KbfkZtTxPqdfS0VltAx95x
5xcr3fTANCqmmW8S2lV0Jbi35Na0roG1wbNhky39Iqe5i7xJ98zSwzW86dCbCI8=
=ITDE
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Two fixes --- one of them not exactly a one liner, but things are
calming down on the KVM front at last"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Fix uninitialized op->type for some immediate values
KVM: s390: virtio_ccw: remove unused variable
- fix umount syscall;
- fix ISS and xtfpga Kconfig dependencies so that more randconfigs are buildable
- add seccomp, getrandom, and memfd_create syscalls;
- add defconfigs for KC705 and SMP LX200;
- implement pgprot_noncached.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=XwDs
-----END PGP SIGNATURE-----
Merge tag 'xtensa-20141109' of git://github.com/czankel/xtensa-linux
Pull Xtensa fixes from Chris Zankel:
- fix umount syscall
- fix ISS and xtfpga Kconfig dependencies so that more randconfigs are
buildable
- add seccomp, getrandom, and memfd_create syscalls
- add defconfigs for KC705 and SMP LX200
- implement pgprot_noncached
* tag 'xtensa-20141109' of git://github.com/czankel/xtensa-linux:
xtensa: xtfpga: add lx200 SMP DTS and defconfig
xtensa: xtfpga: add generic KC705 board config
xtensa: re-wire umount syscall to sys_oldumount
xtensa: xtfpga: only select ethoc when ethernet is available
xtensa: add seccomp, getrandom, and memfd_create syscalls
xtensa: ISS: add BLOCK dependency to BLK_DEV_SIMDISK
xtensa: implement pgprot_noncached
xtensa/uapi: Add definition of TIOC[SG]RS485
Pull crypto fixes from Herbert Xu:
- stack corruption fix for pseries hwrng driver
- add missing DMA unmap in caam crypto driver
- fix NUMA crash in qat crypto driver
- fix buggy mapping of zero-length associated data in qat crypto driver
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
hwrng: pseries - port to new read API and fix stack corruption
crypto: caam - fix missing dma unmap on error path
crypto: qat - Enforce valid numa configuration
crypto: qat - Prevent dma mapping zero length assoc data
in the kernel. The splice logic wants a full page from the ring buffer
but the ring_buffer_wait() returns when there's any data in the ring buffer.
The splice code would then continue the loop waiting for a full page.
But if a full page never happens, the splice code will never sleep and
just continue to loop.
There's another case that Rabin fixed that could loop if there's no memory
and kmalloc() constantly returns NULL.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUYgiFAAoJEEjnJuOKh9ldRuoIAMHOx/TgIYSPuVQBWuljoELZ
Mbaq5EGPkJ0fdwP9+X3JPG7pFazcP8+xZx7iVKYihazgS7BkF/khbxsgPl5ZSGOf
j39kSoWK1ZzKIbM3MMjIBgZ2LF8wL1VoRu/dyI7GXWeBt9Dnj7vDtkoSGCYjDJ9B
UBK2E3vjwNxc4Z9U3YRZj7U4GEKwMkpddKv0DIfAmzA4tF1CryuGmvpkRtGi6wc0
vs6OV1jqFa300v8ckFvTrO/UdBVnisVWHmBrP6XXB/Likz/6+56pphCRvoc/LskG
kFHCsjXXJ/tI+/RdhQt/dqgKDl7Cs3nIhXwMZ/TbaxGdFT6kbq3xbVpRk1L90/U=
=v5/I
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-v3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Rabin Vincent found a way that tracing could cause an infinite loop in
the kernel. The splice logic wants a full page from the ring buffer
but the ring_buffer_wait() returns when there's any data in the ring
buffer. The splice code would then continue the loop waiting for a
full page. But if a full page never happens, the splice code will
never sleep and just continue to loop.
There's another case that Rabin fixed that could loop if there's no
memory and kmalloc() constantly returns NULL"
* tag 'trace-fixes-v3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Do not risk busy looping in buffer splice
tracing: Do not busy wait in buffer splice
If the host uses packet encapsulation feature, the MTU may be reduced by the
host due to headroom reservation for encapsulation. This patch handles this
new MTU value.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull thermal driver fixes from Eduardo Valentin:
"This week we have few fixes:
- fix in IMX thermal driver to do the correct loading sequence with
CPUfreq
- fix in Exynos related to TMU_CONTROL offset in Exynos5260
- fix the unit conversion in int3403"
[ Still pulling from Eduardo as Rui Zhang is on a business trip and has
troubles with his machine ]
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
imx: thermal: imx_get_temp might be called before sensor clock is prepared
thermal: exynos: use correct offset for TMU_CONTROL register on Exynos5260
thermal: imx: correct driver load sequence for cpu cooling
Thermal/int3403: Fix thermal hysteresis unit conversion
Convert WARN_ONCE() to printk() in selinux_nlmsg_perm().
After conversion from audit_log() in commit e173fb26, WARN_ONCE() was
deemed too alarmist, so switch it to printk().
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: Changed to printk(WARNING) so we catch all of the different
invalid netlink messages. In Richard's defense, he brought this
point up earlier, but I didn't understand his point at the time.]
Signed-off-by: Paul Moore <pmoore@redhat.com>
Pull drm fixes from Dave Airlie:
"Radeon and i915 fixes.
I probably should have sent these earlier, but nothing too urgent in
them:
- i915:
blackscreen and corruption fixes
- radeon:
oops, locking and stability"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: add missing crtc unlock when setting up the MC
drm/radeon: use gart for DMA IB tests
drm/radeon: make sure mode init is complete in bandwidth_update
drm/radeon: set correct CE ram size for CIK
drm/i915: safeguard against too high minimum brightness
drm/i915: vlv: fix gunit HW state corruption during S4 suspend
drm/i915: Disable caches for Global GTT.
Even if netlink_kernel_cfg::unbind is implemented the unbind() method is
not called, because cfg->unbind is omitted in __netlink_kernel_create().
And fix wrong argument of test_bit() and off by one problem.
At this point, no unbind() method is implemented, so there is no real
issue.
Fixes: 4f52090052 ("netlink: have netlink per-protocol bind function return an error code.")
Signed-off-by: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com>
Cc: Richard Guy Briggs <rgb@redhat.com>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change the types of the descriptor entries in the xgbe_ring_desc struct
from u32 to __le32 to fix endian warnings issued by sparse.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is to ensure the net_device's dev.parent is set before we used it
in dma_zalloc_coherent() from init_hash_table().
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit ae5c6c6d "ptp: Classify ptp over ip over vlan packets" changed the
code in two drivers that matches time stamps with PTP frames, with the goal
of allowing VLAN tagged PTP packets to receive hardware time stamps.
However, that commit failed to account for the VLAN header when parsing
IPv4 packets. This patch fixes those two drivers to correctly match VLAN
tagged IPv4/UDP PTP messages with their time stamps.
This patch should also be applied to v3.17.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix static checker warning that got introduced in commit e2ac962895
("cxgb4: Cleanup macros so they follow the same style and look consistent, part
2") due to accidental checkin of bogus line.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of calling fou and gue functions directly from ip_tunnel
use ops for these that were previously registered. This patch adds the
logic to add and remove encapsulation operations for ip_tunnel,
and modified fou (and gue) to register with ip_tunnels.
This patch also addresses a circular dependency between ip_tunnel
and fou that was causing link errors when CONFIG_NET_IP_TUNNEL=y
and CONFIG_NET_FOU=m. References to fou an gue have been removed from
ip_tunnel.c
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* In LLD_MANAGED mode, traffic classes were being returned in reverse order to
lldp agent.
* Priotype of strict is no longer the default returned.
* Change behaviour of getdcbx() based on discussions on lldp-devel
These were missed as there was no working fetch interface for open-lldp when
running in LLD_MANAGED mode till now.
Fixes: 76bcb31efc ("cxgb4 : Add DCBx support codebase and dcbnl_ops")
Signed-off-by: Anish Bhatt <anish@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Standardize function pointer uses.
Convert calling style from:
(*foo)(args...);
to:
foo(args...);
Other miscellanea:
o Add braces around loops with single ifs on multiple lines
o Realign arguments around these functions
o Invert logic in if to return immediately.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hayes Wang says:
====================
Code adjustment
v3:
Remove the test_bit for patch #2.
v2:
Correct the spelling error for the comment of patch #3.
v1:
Adjust some codes to make them more reasonable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If the device is unplugged or !netif_running(), the workqueue
doesn't need to wake the device, and could return directly.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clear the flag of SCHEDULE_TASKLET in bottom_half() to avoid
re-schedule the tasklet again by workqueue.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The INIT_LIST_HEAD(&tp->rx_done) would be done in rtl_start_rx(),
so remove the unnecessary one in alloc_all_mem().
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli says:
====================
net: phy: bcm7xxx: workaround updates
This patch series contains some updates to the Broadcom BCM7xxx internal
PHY driver, including:
- removing an annonying print that would appear during interface up/down and
suspend/resume cycles
- drop a workaround sequence for a non-production PHY revision
- add new workarounds for the latest and greatest PHY devices found out there
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
PHY revisions E0 and F0 share the same shorter workaround initialization
sequence. Dedicate a special function for these two PHY revisions to
perform the needed workaround sequence.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PHY revision D0 requires a specific workaround sequence which needs to
be applied to get the HW to behave properly in all corner cases
conditions. Do this based on the revision we just read out of the HW
using a specific function.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This function performs a R/RC calibration reset and will start being
used by more than one function in the next patches, create a helper
function to factor code.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bcm7445_config_init() was working around non-production version of the
PHY HW block, so just remove it entirely.
bcm7xxx_28nm_afe_config_init() was running for all PHY revisions greater
than B0, but this workaround sequence is really specific to the B0 PHY
revision, so rename the function accordingly and update the GPHY macro
to use the generic config_init callback.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bcm7xxx_28nm_config_init() can be called as frequently as needed by the
PHY library upon suspend/resume cycles and interface bring up/down, just
print the PHY revision once and for all in order not to spam kernel
logs.
Fixes: d8ebfed3f1 ("net: phy: bcm7xxx: utilize PHY revision in config_init")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the normal kernel debugging mechanism which also
enables dynamic_debug at the same time.
Other miscellanea:
o Remove sysctl for irda_debug
o Remove function tracing like uses (use ftrace instead)
o Coalesce formats
o Realign arguments
o Remove unnecessary OOM messages
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold says:
====================
net: phy: micrel: refactoring and KSZ8081/KSZ8091 features
This series cleans up and refactors parts of the micrel PHY driver, and
adds support for broadcast-address-disable and led-mode configuration
for KSZ8081 and KSZ8091 PHYs.
Specifically, this enables dual KSZ8081 setups (which are limited to
using address 0 and 3).
A follow up series will add device-type abstraction which will allow for
further refactoring and shared initialisation code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Kochetkov