Here are a number of USB fixes for 3.11-rc3.
Lots of little things, nothing major. A number of new device ids, build
fixes for DMA, and a bunch of other minor things. All of these have
been in the linux-next tree.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlHyp6cACgkQMUfUDdst+ynfQACfb+akG9GYjNpdjkiun0dh2DG2
hDYAoKuhkL1L63vDcIjfFOdZpVKetjPi
=71aA
-----END PGP SIGNATURE-----
Merge tag 'usb-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of USB fixes for 3.11-rc3.
Lots of little things, nothing major. A number of new device ids,
build fixes for DMA, and a bunch of other minor things. All of these
have been in the linux-next tree"
* tag 'usb-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits)
usb: Clear both buffers when clearing a control transfer TT buffer.
usb/gadget: free opts struct on error recovery
USB: mos7840: fix memory leak in open
usb: serial: option.c: remove ONDA MT825UP product ID fromdriver
usb: serial: option: add Olivetti Olicard 200
usb: serial: option: blacklist ONDA MT689DC QMI interface
xhci: fix null pointer dereference on ring_doorbell_for_active_rings
usb: host: xhci: Enable XHCI_SPURIOUS_SUCCESS for all controllers with xhci 1.0
usb: fix build warning in pci-quirks.h when CONFIG_PCI is not enabled
usb: xhci: Mark two functions __maybe_unused
xhci: Avoid NULL pointer deref when host dies.
usb: serial: option: Add ONYX 3G device support
USB: ti_usb_3410_5052: fix dynamic-id matching
usb: option: add TP-LINK MA260
USB: option: add D-Link DWM-152/C1 and DWM-156/C1
USB: EHCI: Fix resume signalling on remote wakeup
USB: cp210x: add MMB and PI ZigBee USB Device Support
usb: cp210x support SEL C662 Vendor/Device
USB: option: append Petatel NP10T device to GSM modems list
USB: misc: Add Manhattan Hi-Speed USB DVI Converter to sisusbvga
...
Here are 3 fixes for TTY and serial issues that have been reported.
Nothing huge, but nice to get fixed.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlHyqbQACgkQMUfUDdst+ylRnACgxsIFAvjVszn4nIjPtrsP+SUD
dooAnjL/xGoi6MdJ92mrjTZ4rjUQgw2Z
=bJyY
-----END PGP SIGNATURE-----
Merge tag 'tty-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are 3 fixes for TTY and serial issues that have been reported.
Nothing huge, but nice to get fixed"
* tag 'tty-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: tegra: correct help message in Kconfig from 'ttyHS' to 'ttyTHS'
tty/8250_early: Don't truncate last character of options
TTY: snyclinkmp: calculating wrong addresses
Here are some tiny drivers/staging/ fixes for 3.11-rc3
A number of bugfixes, all pretty tiny, but resolve issues that have been
reported (the kstrtos32 change fixes a data corruption problem that Dan
found.) And a MAINTAINERS file update for the comedi drivers.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlHyqLIACgkQMUfUDdst+ylR1gCglBMx4nQjWc7Bp5653TQFqveg
F6cAnRnDxVutdUv1WJwhLH7JJT+HQniN
=/dxc
-----END PGP SIGNATURE-----
Merge tag 'staging-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging fixes from Greg KH:
"Here are some tiny drivers/staging/ fixes for 3.11-rc3
A number of bugfixes, all pretty tiny, but resolve issues that have
been reported (the kstrtos32 change fixes a data corruption problem
that Dan found). And a MAINTAINERS file update for the comedi
drivers"
* tag 'staging-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
MAINTAINERS: Update the list of maintainers for staging/comedi driver.
staging: tidspbridge: replace strict_strtol() with kstrtos32()
staging: android: logger: Correct write offset reset on error
staging: zram: protect zram_reset_device() call
staging: gdm72xx: potential use after free in send_qos_list()
staging: drm/imx: drop "select OF_VIDEOMODE"
staging: frontier: use after free in disconnect()
staging: comedi: fix a race between do_cmd_ioctl() and read/write
staging: comedi: COMEDI_CANCEL ioctl should wake up read/write
Here are some char/misc patches for 3.11-rc3. It's pretty much just:
- mei fixes
- hyperv fixes
- new ja_JP translation update
all tiny stuff, but fixes for issues people have reported.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlHyqBcACgkQMUfUDdst+ylMswCgoppo0tfChc0KfyAcsgWwJr2o
iTsAoLEJ2sg8GIGYI765UMXWAkzJyCxR
=oHJj
-----END PGP SIGNATURE-----
Merge tag 'char-misc-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc patches from Greg KH:
"Here are some char/misc patches for 3.11-rc3. It's pretty much just:
- mei fixes
- hyperv fixes
- new ja_JP translation update
all tiny stuff, but fixes for issues people have reported."
* tag 'char-misc-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
HOWTO ja_JP sync
mei: me: fix waiting for hw ready
mei: don't have to clean the state on power up
mei: me: fix reset state machine
mei: hbm: fix typo in error message
Tools: hv: KVP: Fix a bug in IPV6 subnet enumeration
Drivers: hv: balloon: Do not post pressure status if interrupted
Drivers: hv: balloon: Fix a bug in the hot-add code
Drivers: hv: vmbus: incorrect device name is printed when child device is unregistered
Just a handfull of regression and small fixes in ASoC, HD-audio
and USB-audio drivers.
- Sigmetal HD-audio codec regression fixes
- A copule of XRUN indication fixes for usb-audio devices
- ASoC: ep93xx build fix, sgtl5000 fix for probe order changes,
max98088 register access fix, etc
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=7CQ7
-----END PGP SIGNATURE-----
Merge tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a handful of regression and small fixes in ASoC, HD-audio and
USB-audio drivers.
- Sigmetal HD-audio codec regression fixes
- A copule of XRUN indication fixes for usb-audio devices
- ASoC: ep93xx build fix, sgtl5000 fix for probe order changes,
max98088 register access fix, etc"
* tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hiface: return correct XRUN indication
ASoC: tegra: correct playback_dma_data setup
ASoC: core: double free in snd_soc_add_platform()
ALSA: usb-audio: 6fire: return correct XRUN indication
ASoC: ep93xx: fix build of ep93xx-ac97.c
ALSA: hda - Remove NO_PRESENCE bit override for Dell 1420n Laptop
ALSA: hda - Fix EAPD GPIO control for Sigmatel codecs
ASoC: atmel-ssc: remove clk_disable_unprepare call from critical section
ASoC: sgtl5000: defer the probe if clock is not found
ASoC: max98088 - fix element type of the register cache.
- fix for regression in commit cca9f93a52, recovery causing filesystem
corruption after a crash
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=hrYY
-----END PGP SIGNATURE-----
Merge tag 'for-linus-v3.11-rc3' of git://oss.sgi.com/xfs/xfs
Pull xfs fix from Ben Myers:
"Fix for regression in commit cca9f93a52 ("xfs: don't do IO when
creating an new inode"), recovery causing filesystem corruption after
a crash"
* tag 'for-linus-v3.11-rc3' of git://oss.sgi.com/xfs/xfs:
xfs: di_flushiter considered harmful
Pull nfsd fix from Bruce Fields:
"One more nfsd bugfix for 3.11"
* 'for-3.11' of git://linux-nfs.org/~bfields/linux:
nfsd: nfsd_open: when dentry_open returns an error do not propagate as struct file
Both marked for -stable, both since 3.3. I guess I should spend more
time testing...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=68H7
-----END PGP SIGNATURE-----
Merge tag 'md/3.11-fixes' of git://neil.brown.name/md
Pull md fixes from Neil Brown:
"Two more bugfixes for md in 3.11
Both marked for -stable, both since 3.3. I guess I should spend more
time testing..."
* tag 'md/3.11-fixes' of git://neil.brown.name/md:
md/raid5: fix interaction of 'replace' and 'recovery'.
md/raid10: remove use-after-free bug.
Pull libata fixes from Tejun Heo:
"Assorted libata updates.
The most critical one is a fix for ahci oops during boot. Also, a new
smallish platform ahci driver is added and sata_inic162x is marked
clearly as experimental (it whines during boot too) as data corruption
seems rather common on the device and it's unlikely to get any love in
the foreseeable future. If the whining doesn't draw any attention, I
think we'd probably be better of making the driver depend on BROKEN in
a couple releases"
This is v2 of this pull request with fixed dependencies for ahci_imx.
* 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
ahci_imx: depend on CONFIG_MFD_SYSCON
ahci_imx: add ahci sata support on imx platforms
ARM: imx6q: update the sata bits definitions of gpr13
ahci: fix Null pointer dereference in achi_host_active()
libata: make it clear that sata_inic162x is experimental
libata: replace strict_strtol() with kstrtol()
ata: Fix DVD not dectected at some platform with Wellsburg PCH
We attempted to address a regression introduced by commit a57f7f9
(ACPICA: Add Windows8/Server2012 string for _OSI method.) after which
ACPI video backlight support doesn't work on a number of systems,
because the relevant AML methods in the ACPI tables in their BIOSes
become useless after the BIOS has been told that the OS is compatible
with Windows 8. That problem is tracked by the bug entry at:
https://bugzilla.kernel.org/show_bug.cgi?id=51231
Commit 8c5bd7a (ACPI / video / i915: No ACPI backlight if firmware
expects Windows 8) introduced for this purpose essentially prevented
the ACPI backlight support from being used if the BIOS had been told
that the OS was compatible with Windows 8 and the i915 driver was
loaded, in which case the backlight would always be handled by i915.
Unfortunately, however, that turned out to cause problems with
backlight to appear on multiple systems with symptoms indicating that
i915 was unable to control the backlight on those systems as
expected.
For this reason, revert commit 8c5bd7a, but leave the function
acpi_video_backlight_quirks() introduced by it, because another
commit on top of it uses that function.
References: https://lkml.org/lkml/2013/7/21/119
References: https://lkml.org/lkml/2013/7/22/261
References: https://lkml.org/lkml/2013/7/23/429
References: https://lkml.org/lkml/2013/7/23/459
References: https://lkml.org/lkml/2013/7/23/81
References: https://lkml.org/lkml/2013/7/24/27
Reported-and-tested-by: James Hogan <james@albanarts.com>
Reported-and-tested-by: Kamal Mostafa <kamal@canonical.com>
Reported-and-tested-by: Jörg Otte <jrg.otte@gmail.com>
Reported-and-tested-by: Steven Newbury <steve@snewbury.org.uk>
Reported-by: Martin Steigerwald <Martin@lichtvoll.de>
Reported-by: Kalle Valo <kvalo@adurom.com>
Tested-by: Joerg Platte <jplatte@naasa.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ahci_imx makes use of regmap but the dependency wasn't specified in
Kconfig leading build failures if CONFIG_AHCI_IMX is enabled but
CONFIG_MFD_SYSCON is not. Add the Kconfig dependency.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Commit a82274151a "tracing: Protect ftrace_trace_arrays list in trace_events.c"
added taking the trace_types_lock mutex in trace_events.c as there were
several locations that needed it for protection. Unfortunately, it also
encapsulated a call to tracing_reset_all_online_cpus() which also takes
the trace_types_lock, causing a deadlock.
This happens when a module has tracepoints and has been traced. When the
module is removed, the trace events module notifier will grab the
trace_types_lock, do a bunch of clean ups, and also clears the buffer
by calling tracing_reset_all_online_cpus. This doesn't happen often
which explains why it wasn't caught right away.
Commit a82274151a was marked for stable, which means this must be
sent to stable too.
Link: http://lkml.kernel.org/r/51EEC646.7070306@broadcom.com
Reported-by: Arend van Spril <arend@broadcom.com>
Tested-by: Arend van Spriel <arend@broadcom.com>
Cc: Alexander Z Lam <azl@google.com>
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: David Sharp <dhsharp@google.com>
Cc: stable@vger.kernel.org # 3.10
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Written by Catalin Marinas, tested by APM on storm platform. This is needed
because of the failures encountered when running SpecWeb benchmark test.
Signed-off-by: Feng Kan <fkan@apm.com>
Acked-by: Kumar Sankaran <ksankaran@apm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Brown-paper-bag pull request here. The snb rc6 fix from the last pull
broke forcewake BIOS dirt cleanup, which with fixed. But that fix broke
the spinlock init sequence, which results in an ugly BUG when spinlock
debugging is enabled :( So I get to throw another patch at cc: stable to
fix up the mess ...
* tag 'drm-intel-fixes-2013-07-25' of git://people.freedesktop.org/~danvet/drm-intel:
drm/i915: initialize gt_lock early with other spin locks
drm/i915: fix hdmi portclock limits
r600 dpm fixes, old school card dac fixes, lockup fixes
endian fixes
* 'drm-fixes-3.11' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon/dpm: fix r600_enable_sclk_control()
drm/radeon/dpm: implement force performance levels for rv6xx
drm/radeon/dpm: fix displaygap programming on rv6xx
drm/radeon/dpm: fix a typo in the rv6xx mclk setup
drm/radeon: fix combios tables on older cards
drm/radeon: improve dac adjust heuristics for legacy pdac
drm/radeon: Another card with wrong primary dac adj
drm/radeon: fix endian issues with DP handling (v3)
drm/radeon/vm: only align the pt base to 32k
drm/radeon: wait for 3D idle before using CP DMA
The device-tree enablement for max8925 has several problems, but besides
the bindings being wrong (and not having seen review) there's also some
bad coding practices on how to fill in the platform_data from device tree.
I came across this since it causes a warning when compiling
mmp2_defconfig, and instead of doing the minimal fix to silence the
warning, I restructured the code a bit.
This silences the warning:
drivers/video/backlight/max8925_bl.c: In function 'max8925_backlight_probe':
drivers/video/backlight/max8925_bl.c:177:3: warning: statement with no effect [-Wunused-value]
Note that the bindings themselves need to be revisited too, but that will
affect more than just the backlight driver and is best done separately;
this just fixes the bad code for the backlight driver.
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Need to use the driver state rather than the register
state since the displays may not be enabled when the
power state is programmed.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is the driver for Xillybus, which is a general-purpose interface for
data communication with FPGAs (programmable logic). Please refer to the
README included in this patch for a detailed explanation.
It was previously submitted for misc-devices, but it appears like noone's
willing to review the code (which I can understand, given its magnitude).
Hence submitted as a staging driver.
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DBG_PORT80 is always defined as empty macro
because VIAWET_DEBUG is never defined. Remove
it and VIAWET_DEBUG.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ASSERT is always defined as empty macro
because VIAWET_DEBUG is never defined.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg spotted that said driver is not subscribing to the automagic
mechanism of auto-loading if a user tries to open /dev/zram.
This fixes it.
CC: Minchan Kim <minchan@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The resolution of msleep is related to HZ, so with HZ set to
100 any msleep of less then 10ms will become ~10ms. This is
not what we want. Use usleep_range to get more control of
what is happening here.
Signed-off-by: Jens Frederich <jfrederich@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There was some code that cleared the dma_mask when dma was disabled in
the driver. Given that clearing the mask doesn't actually tell the usb
core we're not using dma, and a previous commit explicitely sets the
hcd->self.uses_dma value, it seems these values are unneeded and can
only potentially cause problems (when reloading a module, for example).
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This thing seems to do some kind of delayed setup. Really, real kms
drivers shouldn't do that at all. Either stuff needs to be dynamically
hotplugged or the driver setup sequence needs to be fixed.
This patch here just moves the setup at the very end of the driver
load callback, with the locking adjusted accordingly.
v2: Also move the corresponding put from ->lastclose to ->unload.
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
clk_prepare_enable() may fail, so let's check its return value and propagate it
in the case of error.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As devm_ioremap_resource() is used on probe, there is no need to explicitly
check the return value from platform_get_resource(), as this is something that
devm_ioremap_resource() takes care by itself.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LVDS Display Bridge is currently supported, so remove it from the missing
features list.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
IPUv3 has a total of 3 flows (one synchronous flow and 2 asynchronous flows).
Let's add a definition for such number in order to let the code easier to
understand.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No need to have braces for a single line 'if' block
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When building imx_v6_v7_defconfig with imx-drm drivers selected as modules, we
get the following build error:
ERROR: "imx_drm_encoder_get_mux_id" [drivers/staging/imx-drm/imx-ldb.ko] undefined!
Export the required function to avoid this problem.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sparc64 allmodconfig:
drivers/staging/comedi/drivers/addi_apci_2032.c: In function 'apci2032_auto_attach':
drivers/staging/comedi/drivers/addi_apci_2032.c:328:3: error: implicit declaration of function 'kzalloc' [-Werror=implicit-function-declaration]
drivers/staging/comedi/drivers/addi_apci_2032.c:328:11: warning: assignment makes pointer from integer without a cast [enabled by default]
drivers/staging/comedi/drivers/addi_apci_2032.c: In function 'apci2032_detach':
drivers/staging/comedi/drivers/addi_apci_2032.c:350:3: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration]
drivers/staging/comedi/drivers/amplc_pci224.c: In function 'pci224_attach_common':
drivers/staging/comedi/drivers/amplc_pci224.c:1289:2: error: implicit declaration of function 'kmalloc' [-Werror=implicit-function-declaration]
drivers/staging/comedi/drivers/amplc_pci224.c:1289:23: warning: assignment makes pointer from integer without a cast [enabled by default]
drivers/staging/comedi/drivers/amplc_pci224.c:1296:24: warning: assignment makes pointer from integer without a cast [enabled by default]
drivers/staging/comedi/drivers/amplc_pci224.c:1303:25: warning: assignment makes pointer from integer without a cast [enabled by default]
drivers/staging/comedi/drivers/amplc_pci224.c:1348:42: warning: assignment makes pointer from integer without a cast [enabled by default]
drivers/staging/comedi/drivers/amplc_pci224.c: In function 'pci224_detach':
drivers/staging/comedi/drivers/amplc_pci224.c:1474:3: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration]
Introduced by commit 0bdab509bf ("staging:
comedi: use comedi_alloc_devpriv()"), which removed some inclusions of
<linux/slab.h>.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tidy up the multi-line comments at the beginning of the file and
remove any irrelevant information.
Fix the II20K_ID_PCI200341M_1 define, there are one to many 0's.
Rename all the remaining pci20xxx_* to ii20k_*. The "pci" just adds
confusion, this is not a PCI board.
Remove the private (*detach) function. It's safe to call the comedi
core provided comedi_legacy_detach() even if there is nothing to
cleanup.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PCI-200341M-1 module can both provide an analog input subdevice
in this driver. The module provides four differential input channels
with four programmable gains.
Currently the gain is configured as an option passed when the board
is attached. Rewrite the ai subdevice support functions to properly
handle the programmable gain.
For aesthetics, redefine the memory map for the module.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PCI-20006M-1 and PCI-20006M-2 modules can both provide an
analog output subdevice in this driver. Fix the module init code
to detect both of them.
The analog output can support +/-5, 0-10, or +/-10 volt ranges
depending on jumpers on the board. Report all the ranges to the
user instead of relying on the configuration options to set the
range. The user can then select the appropriate range depending
on how they have configured the hardware.
Tidy up the (*insn_{read,write})() functions to work like the
comedi core expects.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The union used for the subdevice private data just adds confusion.
Split the union into two separate private data structs.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'iobase' can be calculated when needed. Remove it from the
subdevice private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the carrier board id to determine if a module is installed for
a given subdevice.
Consolidate the module init code into ii20k_init_module().
For aesthetic reasons, rename the subdevice functions to remove
'pci' from them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For asethetics, redefine the register map for the carrier board.
The 'PCI*' names lead one to think this is a PCI board not a
legacy ISA board.
Remove the #if 0'd out pci20xxx_{do,di}() functions. They are not
needed.
Rename, and fix, the pci20xxx_dio_config() function. The control
and direction registers are not readable. Use the new register map
defines instead of the crazy bit shifts.
Rename, and fix, the pci20xxx_dio_insn_config() function. This
function should treat data[0] as the 'instruction' to handle not
just use it to determine if the port is an input or output.
Rename, and tix, the pci20xxx_dio_insn_bits() function. The 'state'
only needs to be updated if the 'mask' indicates.
For aesthetics, abosrb the pci20xxx_dio_init() into the (*attach)
function.
Fix the carrier board id detect in the (*attach). There are two carrier
board types, one with 32 dio channels and one without. Use this info
when setting up the dio subdevice.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro is not used, and it looks to much like the comedi CR_CHAN
macro. Just remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetic reasons, move the static const data to the head of
the file.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move a couple functions to remove the need for the last forward
declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the pci20xxx_dio_*() functions to remove the need for some of
the forward declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds