The -lgcc command-line argument is placed poorly in the build options,
which can result in build failures, for exapmle, on ARM when uidiv()
is required. This commit therefore places the -lgcc argument after the
source files.
Fixes: b94ec36896 ("rcutorture: Make use of nolibc when available")
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com> [arm64]
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
RCU's rcutree.use_softirq=0 kernel boot parameter substitutes the per-CPU
rcuc kthreads for softirq, which is used in real-time installations.
However, none of the rcutorture scenarios test this parameter.
This commit therefore adds rcutree.use_softirq=0 to the RUDE01 and
TASKS01 rcutorture scenarios, both of which indirectly exercise RCU.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The sizes of vmlinux files built with KASAN enabled can approach a full
gigabyte, which can result in disk overflow sooner rather than later.
Fortunately, the xz command compresses them by almost an order of
magnitude. This commit therefore uses xz to compress vmlinux file built
by torture.sh with KASAN enabled.
However, xz is not the fastest thing in the world. In fact, it is way
slower than rotating-rust mass storage. This commit therefore also adds a
--compress-kasan-vmlinux argument to specify the degree of xz concurrency,
which defaults to using all available CPUs if there are that many files in
need of compression.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In 2020, running KCSAN often requires careful choice of compiler.
This commit therefore adds a --kcsan-kmake-arg parameter to torture.sh
to allow specifying (for example) "CC=clang" to the kernel build process
to correctly build a KCSAN-enabled kernel.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds the command and arguments to the torture.sh log file, and
also outputs the results directory. This latter allows impatient users
to quickly find the results that are being generated by the current run.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds --configs-rcutorture, --configs-locktorture, and
--configs-scftorture arguments to torture.sh, allowing the desired
set of scenarios to be passed to each. The default for each has been
changed from a large-system-appropriate set to just CFLIST for each.
Users are encouraged to create scripts that provide appropriate settings
for their specific systems.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Now that kvm.sh puts all the relevant details in the "log" file,
there is no need for torture.sh to generate a separate "log.long"
file. This commit therefore drops this from torture.sh.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit causes torture.sh to check for zero-length runs and to take
the cowardly option of refusing to run them, logging its cowardice for
later inspection.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit causes torture.sh to use the torture.verbose_sleep_frequency
kernel boot parameter to throttle verbose refscale output on large systems.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit places "---" markers in the torture.sh script's allmodconfig
output, and uses "<<" to avoid overwriting earlier output from this
build test.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit saves a few lines of code by creating a doyesno helper bash
function for argument parsing.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
On large systems, the refscale printk() rate can overrun the file system's
ability to accept console log messages. This commit therefore uses the
new verbose_batched module parameter to rate-limit some of the higher-rate
printk() calls.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The .mod.c files created by allmodconfig builds interfers with the approach
torture.sh uses to enumerate types of rcuscale and refscale runs. This
commit therefore tightens the pattern matching to avoid this interference.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit uncomments the argument checking for the --duration argument
to torture.sh. While in the area, it also corrects the duration units
from seconds to minutes.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit improves torture.sh flexibility by autoscaling the number
of CPUs to be used in variable-CPUs torture tests, including scftorture,
refscale, rcuscale, and kvfree.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds the ability to do "make allmodconfig" to torture.sh,
given that normal rcutorture runs do not normally catch missing exports.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The bash "eval" command enables Bobby Tables attacks, which might not
be a concern in torture testing by themselves, but one could imagine
these combined with a cut-and-paste attack. This commit therefore gets
rid of them. This comes at a price in terms of bash quoting not working
nicely, so the "--bootargs" argument lists are now passed to torture_one
via a bash-variable side channel. This might be a bit ugly, but it will
also allow torture.sh to grow its own --bootargs parameter.
While in the area, add proper header comments for the bash functions.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit makes torture.sh use the new bash functions get_starttime()
and get_starttime_duration() created for kvm.sh.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Although tailoring a specific set of kvm.sh runs has served rcutorture
testing well over many years, it requires a relatively distraction-free
environment, which is not always available. This commit therefore
adds a prototype torture.sh script that by default tortures pretty much
everything the rcutorture scripting is designed to torture, and which
can be given command-line arguments to take a more focused approach.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds periodic toggling of 7 of 8 CPUs every second to TREE01
in order to test NOCB toggle code.
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Inspired-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, if a scenario is repeated as in "--configs '4*TREE01'",
the Kconfig analysis is performed for each occurrance (four times in
this example) and each analysis places the exact same data into the
exact same files. This is not really an issue in this repetition-four
example, but it can needlessly consume tens of seconds of wallclock time
for something like "--config '128*TINY01'".
This commit therefore does Kconfig analysis only once per set of
repeats of a given scenario, courtesy of the "sort -u" command and an
automatically generated awk script.
While in the area, this commit also wordsmiths a comment.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Normally, kvm-recheck.sh is run from kvm.sh, which provides the
TORTURE_TRUST_MAKE environment variable that, if a non-empty string,
indicates that the --trust-make command-line parameter has been passed
to kvm.sh. If there was no --trust-make, kvm-recheck.sh insists
that the Make.out file contain at least one "CC" command. Thus, when
kvm-recheck.sh is run standalone to evaluate a prior --trust-make run,
it will incorrectly insist that a proper kernel build did not happen.
This commit therefore causes kvm-recheck.sh to also search the "log"
file in the top-level results directory for the string "--trust-make".
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Commit 757055ae8d ("init/console: Use ttynull as a fallback when
there is no console") results in the string "Warning: Failed to add
ttynull console. No stdin, stdout, and stderr for the init process!"
appearing on the console, which the rcutorture scripting interprets as
a warning, which causes every rcutorture run to be flagged. However,
the rcutorture init process never attempts to do any I/O, and thus does
not care that it has no stdin, stdout, or stderr.
This commit therefore causes the rcutorture scripting to ignore this
message.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit simplifies exit-code plumbing. It makes kvm-recheck.sh return
the value 1 for a build error and 2 for a runtime error. It also makes
kvm-find-errors.sh avoid checking runtime files for --build-only runs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit changes the "STOP" file that is used to cleanly halt a running
rcutorture run to "STOP.1" because no scenario directory will ever end
with ".1". If there really was a scenario named "STOP", its directories
would instead be named "STOP", "STOP.2", "STOP.3", and so on. While in
the area, the commit also changes the kernel-run-time checks for this
file to look directly in the directory above $resdir, thus avoiding the
need to pass the TORTURE_STOPFILE environment variable to remote systems.
While in the area, move the STOP.1 file to the top-level directory
covering all of the scenarios.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When all of the remote systems have the same number of CPUs, one
approach is to use one "--buildonly" run and one "--dryrun sched" run,
and then distributing the batches out one per remote system. However,
the output of "--dryrun sched" is not made for parsing, so this commit
adds a "--dryrun batches" that provides the same information in easily
parsed form.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
By default, the "panic" kernel parameter is zero, which causes the kernel
to loop indefinitely after a panic(). The rcutorture scripting will
eventually kill the corresponding qemu process, but only after waiting
for the full run duration plus a few minutes. This works, but delays
notifying the developer of the failure.
This commit therefore causes the rcutorture scripting to pass the
"panic=-1" kernel parameter, which caused the kernel to instead
unceremoniously shut down immediately. This in turn causes qemu to
terminate, so that if all of the runs in a given batch panic(), the
rcutorture scripting can immediately proceed to the next batch.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds the test summary to the end of the log in the top-level
directory containing the kvm.sh test artifacts. While in the area, it adds
the kvm.sh exit code to this test summary.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, passing something like "--kconfig CONFIG_NR_CPUS=2" to kvm.sh
has no effect on scenario scheduling. For scenarios that do not specify
the number of CPUs, this can result in kvm.sh wastefully scheduling only
one scenario at a time even when the --kconfig argument would allow
a number to be run concurrently. This commit therefore makes kvm.sh
consider the --kconfig arguments when scheduling scenarios across the
available CPUs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The kvm.sh script uses kvm-find-errors.sh to evaluate whether or not
a build failed. Unfortunately, kvm-find-errors.sh returns success if
there are no failed runs (including when there are no runs at all) even if
there are build failures. This commit therefore makes kvm-find-errors.sh
return failure in response to build failures.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Given that kvm.sh in invoked from scripts, it is only natural for
different levels of scripting to provide their own Kconfig option values,
for example. Unfortunately, right now, the last such argument on the
command line wins.
This commit therefore makes the --bootargs, --configs, --kconfigs,
--kmake-args, and --qemu-args argument values accumulate. For example,
where "--configs TREE01 --configs TREE02" would previously have run only
scenario TREE02, now it will run both scenarios.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, the "date" command producing the output on the kvm.sh "Test
Summary" line is executed at the beginning of the test, which produces a
date that is less than helpful to someone wanting to know the duration
of the test. This commit therefore defers this command's execution to
the end of the test.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcutorture scripts' identify_qemu_vcpus() function expects `lscpu`
to have a "CPU: " line, for example:
CPU(s): 8
But different local language settings can give different results:
Processeur(s) : 8
As a result, identify_qemu_vcpus() may return an empty string, resulting
in the following warning (with the same local language settings):
kvm-test-1-run.sh: ligne 138 : test: : nombre entier attendu comme expression
This commit therefore changes identify_qemu_vcpus() to use getconf,
which produces local-language-independend output.
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: rcu@vger.kernel.org
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a config2csv.sh script that converts the specified
torture-test scenarios' Kconfig options and kernel-boot parameters to
.csv format. This allows easier comparison of scenarios when one fails
and another does not.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Distributed execution of rcutorture is eased if the qemu execution can
be split from the building of the kernel, as this allows target systems
to be used that are not set up to build kernels. It also avoids issues
with toolchain version skew across the cluster, aside of course from
qemu and KVM version skew.
This commit therefore records needed data as comments in the qemu-cmd file
and moves recording of the starting time to just before qemu is launched.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Scripts like kvm-check-branches.sh group runs under a single directory
in resdir in order to allow easier retrospective analysis. However, they
do this by letting kvm.sh create a directory as usual and then moving it
after the run. This can be very confusing when looking at the results
while kvm-check-branches.sh is running. This commit therefore enables
--datestamp to hand subdirectories to kvm.sh.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Knowing the number of builds that kvm.sh will split a run into allows
estimation of the duration of a test, give or take build duration.
This commit therefore adds a line of output to "--dryrun sched" that
gives the number of builds that will be run. This excludes "builds"
for repeated scenarios that reuse an earlier build.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Knowing the number of batches that kvm.sh will split a run into allows
estimation of the duration of a test, give or take the number of builds.
This commit therefore adds a line of output to "--dryrun sched" that
gives the number of batches that will be run.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The --kcsan argument to kvm.sh adds CONFIG_KCSAN_VERBOSE=y in order to
get more detail from the KCSAN reports. However, this Kconfig option
requires lockdep to be enabled. This commit therefore causes --kcsan
to also enable lockdep.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
For the rcutorture test summary log file console.log of virtual machines is
parsed. When a console.log contains "DEBUG", BUG counter is incremented
because regular expression does not handle to ignore DEBUG.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Reviewed-by: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently the kvm-check-branches.sh script calculates the number of CPUs
and passes this to the kvm.sh --cpus command-line argument. This works,
but this commit saves a line by instead using the new kvm.sh --allcpus
command-line argument.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit allows --build-only as a synonym for --buildonly, --kconfigs
for --kconfig, and --kmake-args for --kmake-arg.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The "--duration <minutes>" has worked well for a very long time, but
it can be inconvenient to compute the minutes for (say) a 28-hour run.
It can also be annoying to have to let a simple boot test run for a full
minute. This commit therefore permits an "s" suffix to specify seconds,
"m" to specify minutes (which remains the default), "h" suffix to specify
hours, and "d" to specify days.
With this change, "--duration 5" still specifies that each scenario
run for five minutes, but "--duration 30s" runs for only 30 seconds,
"--duration 8h" runs for eight hours, and "--duration 2d" runs for
two days.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Although the rcutorture scripting now deals correctly with full-up
security-induced pointer obfuscation, it is still counter-productive for
kernel hackers who are analyzing console output. This commit therefore
sets the debug_boot_weak_hash kernel boot parameter, which enables
printing of weak-hashed pointers for torture-test runs.
Please note that this change applies only to runs initiated by the
kvm.sh scripting. If you are instead using modprobe and rmmod, it is
your responsibility to build and boot the underlying kernel to your taste.
Please note further that this change does not result in a security hole
in normal use. The rcutorture testing runs with a negligible userspace,
no networking, and no user interaction. Besides which, there is no data
of value that can be extracted from an rcutorture guest OS that could
not also be extracted from the host that this guest is running on.
Suggested-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Even when the kernel panics and qemu dies, runs with jitter enabled will
continue uselessly until the jitter.sh processes terminate. This can
be annoying if a planned one-hour run instead dies during boot.
This commit therefore kills the jitter.sh processes when the run ends
more than one minute prior to the termination time specified by the
kvm.sh --duration argument or its default.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The SRCU-u scenario expects to enable lockdep but to also disable the
CONFIG_PREEMPT_COUNT kconfig option. This no longer works. This commit
therefore instead enables lockdep in SRCU-t, which then allows SRCU-u
to disable CONFIG_PREEMPT_COUNT.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Ingo Molnar