The kAPI cec-pin.h header also defined data structures that did
not belong here but were private to the CEC core code.
Split that part off into a cec-pin-priv.h header.
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This addresses the wrong behavior of decoder stop command by
rewriting it. These new implementation enqueue an empty buffer
on the decoder input buffer queue to signal end-of-stream. The
client should stop queuing buffers on the V4L2 Output queue
and continue queuing/dequeuing buffers on Capture queue. This
process will continue until the client receives a buffer with
V4L2_BUF_FLAG_LAST flag raised, which means that this is last
decoded buffer with data.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org> # for v4.13 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
In case of error, the function platform_device_register_data() returns
ERR_PTR() and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This fixes wrongly filled bytesused field of v4l2_plane structure
by include data_offset in the plane, Also fill data_offset and
bytesused for capture type of buffers only.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org> # for v4.13 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
To improve the readability of code, split the format array into two,
one for the format description, other for the register configuration.
Meanwhile, add the flag member to indicate the format can be achieved
from the sensor or be produced by the controller, and rename members
related to the register configuration.
Also add more formats support: GREY, ARGB444, ARGB555 and ARGB32.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Remove the memeber *config from the isc_subdev_entity struct,
the member is useless afterward.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
To meet the relationship, enable the HCLOCK and ispck during the
device probe, "isc_pck frequency is less than or equal to isc_ispck,
and isc_ispck is greater than or equal to HCLOCK."
Meanwhile, call the pm_runtime_enable() in the right place.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
A software write operation to the ISC_CLKEN or ISC_CLKDIS register
requires double clock domain synchronization and is not permitted
when the ISC_SR.SIP is asserted. So add the .prepare and .unprepare
ops to make sure the ISC_CLKSR.SIP is unasserted before the write
operation to the ISC_CLKEN or ISC_CLKDIS register.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add the spin lock for the clock enable and disable operations.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This change will fix an issue with dma_free size found with
DMA API debug enabled.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org> # for v4.13 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Instead of relying on a mix of runtime PM and the s_power() callback, drop
the s_power() callback altogether and use runtime PM solely.
As device access is required during device power-on and power-off
sequences, runtime PM alone cannot tell whether the device is available.
Thus the "active" field is introduced in struct smiapp_sensor to tell
whether it is safe to write to the device.
Consequently there is no need to power on the device whenever a file
handle is open. This functionality is removed as well. The user may still
control the device power management through sysfs. Autosuspend remains
enabled, with 1 s delay.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Use unlocked __v4l2_ctrl_handler_setup() in order to make the
control setup atomic.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* commit '3728e6a255b5': (904 commits)
Linux 4.14-rc5
x86/microcode: Do the family check first
locking/lockdep: Disable cross-release features for now
x86/mm: Flush more aggressively in lazy TLB mode
mm, swap: use page-cluster as max window of VMA based swap readahead
mm: page_vma_mapped: ensure pmd is loaded with READ_ONCE outside of lock
kmemleak: clear stale pointers from task stacks
fs/binfmt_misc.c: node could be NULL when evicting inode
fs/mpage.c: fix mpage_writepage() for pages with buffers
linux/kernel.h: add/correct kernel-doc notation
tty: fall back to N_NULL if switching to N_TTY fails during hangup
Revert "vmalloc: back off when the current task is killed"
mm/cma.c: take __GFP_NOWARN into account in cma_alloc()
scripts/kallsyms.c: ignore symbol type 'n'
userfaultfd: selftest: exercise -EEXIST only in background transfer
mm: only display online cpus of the numa node
mm: remove unnecessary WARN_ONCE in page_vma_mapped_walk().
mm/mempolicy: fix NUMA_INTERLEAVE_HIT counter
include/linux/of.h: provide of_n_{addr,size}_cells wrappers for !CONFIG_OF
mm/madvise.c: add description for MADV_WIPEONFORK and MADV_KEEPONFORK
...
-----BEGIN PGP SIGNATURE-----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=VOJs
-----END PGP SIGNATURE-----
Merge tag 'media/v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"Core fixes:
- cec: Respond to unregistered initiators, when applicable
- dvb_frontend: only use kref after initialized
Driver-specific fixes:
- qcom, camss: Make function vfe_set_selection static
- qcom: VIDEO_QCOM_CAMSS should depend on HAS_DMA
- s5p-cec: add NACK detection support
- media: staging/imx: Fix uninitialized variable warning
- dib3000mc: i2c transfers over usb cannot be done from stack
- venus: init registered list on streamoff"
* tag 'media/v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: dvb_frontend: only use kref after initialized
media: platform: VIDEO_QCOM_CAMSS should depend on HAS_DMA
media: cec: Respond to unregistered initiators, when applicable
media: s5p-cec: add NACK detection support
media: staging/imx: Fix uninitialized variable warning
media: qcom: camss: Make function vfe_set_selection static
media: venus: init registered list on streamoff
media: dvb: i2c transfers over usb cannot be done from stack
Most devices do not support lane reordering and in many cases the
documentation of the data-lanes property is incomplete for such devices.
Document that in case the lane reordering isn't supported, monotonically
incremented values from 0 or 1 shall be used.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Port and endpoint numbering has been omitted in DT binding documentation
for a large number of devices. Also common properties the device uses have
been missed in binding documentation. Make it explicit that these things
need to be documented.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The script “checkpatch.pl” pointed information out like the following.
Comparison to NULL could be written...
Thus fix the affected source code places.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Replace the specification of a data structure by a pointer dereference
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Omit an extra message for a memory allocation failure in s5p_mfc_probe()
function. This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The hardware rotation limits of gsc depends on SOC (Exynos
5250/5420/5433). Distinguish them and add them to the driver data.
[s.nawrocki@samsung.com: corrected num_entities in 5420 variant data]
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Exynos 5250 and 5420 have different hardware rotation limits.
Since we have to distinguish between these two, we add different
compatible: samsung,exynos5250-gsc and samsung,exynos5420-gsc.
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Rockchip RGA is a separate 2D raster graphic acceleration unit. It
accelerates 2D graphics operations, such as point/line drawing, image
scaling, rotation, BitBLT, alpha blending and image blur/sharpness
The driver supports various operations from the rendering pipeline.
- copy
- fast solid color fill
- rotation
- flip
- alpha blending
The code in rga-hw.c is used to configure regs according to operations
The code in rga-buf.c is used to create private mmu table for RGA.
Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Here are 4 patches to resolve some char/misc driver issues found these
past weeks.
One of them is a mei bugfix and another is a new mei device id. There
is also a hyper-v fix for a reported issue, and a binder issue fix for a
problem reported by a few people.
All of these have been in my tree for a while, I don't know if
linux-next is really testing much this month. But 0-day is happy with
them :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWeNCTw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykNOQCgzskhoji+7Fsl+xc3SX/3ntJwoecAnAz5xQIA
grpH4IOHq/0aPbQj8g3Y
=F3xc
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are 4 patches to resolve some char/misc driver issues found these
past weeks.
One of them is a mei bugfix and another is a new mei device id. There
is also a hyper-v fix for a reported issue, and a binder issue fix for
a problem reported by a few people.
All of these have been in my tree for a while, I don't know if
linux-next is really testing much this month. But 0-day is happy with
them :)"
* tag 'char-misc-4.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
binder: fix use-after-free in binder_transaction()
Drivers: hv: vmbus: Fix bugs in rescind handling
mei: me: add gemini lake devices id
mei: always use domain runtime pm callbacks.
Here are a handful of USB driver fixes for 4.14-rc5.
There is the "usual" usb-serial fixes and device ids, USB gadget fixes,
and some more fixes found by the fuzz testing that is happening on the
USB layer right now.
All of these have been in my tree this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWeNDHw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yngbQCbBhbyMDZskwrjemqopL4ML1pGrAkAoKwcX2VK
lq1pOJB2GCMeWuUrFLzr
=MIeM
-----END PGP SIGNATURE-----
Merge tag 'usb-4.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a handful of USB driver fixes for 4.14-rc5.
There is the "usual" usb-serial fixes and device ids, USB gadget
fixes, and some more fixes found by the fuzz testing that is happening
on the USB layer right now.
All of these have been in my tree this week with no reported issues"
* tag 'usb-4.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: usbtest: fix NULL pointer dereference
usb: gadget: configfs: Fix memory leak of interface directory data
usb: gadget: composite: Fix use-after-free in usb_composite_overwrite_options
usb: misc: usbtest: Fix overflow in usbtest_do_ioctl()
usb: renesas_usbhs: Fix DMAC sequence for receiving zero-length packet
USB: dummy-hcd: Fix deadlock caused by disconnect detection
usb: phy: tegra: Fix phy suspend for UDC
USB: serial: console: fix use-after-free after failed setup
USB: serial: console: fix use-after-free on disconnect
USB: serial: qcserial: add Dell DW5818, DW5819
USB: serial: cp210x: add support for ELV TFD500
USB: serial: cp210x: fix partnum regression
USB: serial: option: add support for TP-Link LTE module
USB: serial: ftdi_sio: add id for Cypress WICED dev board
Pull x86 fixes from Ingo Molnar:
"A landry list of fixes:
- fix reboot breakage on some PCID-enabled system
- fix crashes/hangs on some PCID-enabled systems
- fix microcode loading on certain older CPUs
- various unwinder fixes
- extend an APIC quirk to more hardware systems and disable APIC
related warning on virtualized systems
- various Hyper-V fixes
- a macro definition robustness fix
- remove jprobes IRQ disabling
- various mem-encryption fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Do the family check first
x86/mm: Flush more aggressively in lazy TLB mode
x86/apic: Update TSC_DEADLINE quirk with additional SKX stepping
x86/apic: Silence "FW_BUG TSC_DEADLINE disabled due to Errata" on hypervisors
x86/mm: Disable various instrumentations of mm/mem_encrypt.c and mm/tlb.c
x86/hyperv: Fix hypercalls with extended CPU ranges for TLB flushing
x86/hyperv: Don't use percpu areas for pcpu_flush/pcpu_flush_ex structures
x86/hyperv: Clear vCPU banks between calls to avoid flushing unneeded vCPUs
x86/unwind: Disable unwinder warnings on 32-bit
x86/unwind: Align stack pointer in unwinder dump
x86/unwind: Use MSB for frame pointer encoding on 32-bit
x86/unwind: Fix dereference of untrusted pointer
x86/alternatives: Fix alt_max_short macro to really be a max()
x86/mm/64: Fix reboot interaction with CR4.PCIDE
kprobes/x86: Remove IRQ disabling from jprobe handlers
kprobes/x86: Set up frame pointer in kprobe trampoline
Pull RAS fixes from Ingo Molnar:
"A boot parameter fix, plus a header export fix"
* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Hide mca_cfg
RAS/CEC: Use the right length for "cec_disable"
Pull perf fixes from Ingo Molnar:
"Some tooling fixes plus three kernel fixes: a memory leak fix, a
statistics fix and a crash fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Fix memory leaks on allocation failures
perf/core: Fix cgroup time when scheduling descendants
perf/core: Avoid freeing static PMU contexts when PMU is unregistered
tools include uapi bpf.h: Sync kernel ABI header with tooling header
perf pmu: Unbreak perf record for arm/arm64 with events with explicit PMU
perf script: Add missing separator for "-F ip,brstack" (and brstackoff)
perf callchain: Compare dsos (as well) for CCKEY_FUNCTION
Pull locking fixes from Ingo Molnar:
"Two lockdep fixes for bugs introduced by the cross-release dependency
tracking feature - plus a commit that disables it because performance
regressed in an absymal fashion on some systems"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Disable cross-release features for now
locking/selftest: Avoid false BUG report
locking/lockdep: Fix stacktrace mess
Pull irq fixes from Ingo Molnar:
"A CPU hotplug related fix, plus two related sanity checks"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/cpuhotplug: Enforce affinity setting on startup of managed irqs
genirq/cpuhotplug: Add sanity check for effective affinity mask
genirq: Warn when effective affinity is not updated
Pull objtool fix from Ingo Molnar:
"A single objtool fix: avoid silently broken ORC debuginfo builds and
error out instead"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Upgrade libelf-devel warning to error for CONFIG_ORC_UNWINDER
On CPUs like AMD's Geode, for example, we shouldn't even try to load
microcode because they do not support the modern microcode loading
interface.
However, we do the family check *after* the other checks whether the
loader has been disabled on the command line or whether we're running in
a guest.
So move the family checks first in order to exit early if we're being
loaded on an unsupported family.
Reported-and-tested-by: Sven Glodowski <glodi1@arcor.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org> # 4.11..
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://bugzilla.suse.com/show_bug.cgi?id=1061396
Link: http://lkml.kernel.org/r/20171012112316.977-1-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Johan Hovold reported a big lockdep slowdown on his system, caused by lockdep:
> I had noticed that the BeagleBone Black boot time appeared to have
> increased significantly with 4.14 and yesterday I finally had time to
> investigate it.
>
> Boot time (from "Linux version" to login prompt) had in fact doubled
> since 4.13 where it took 17 seconds (with my current config) compared to
> the 35 seconds I now see with 4.14-rc4.
>
> I quick bisect pointed to lockdep and specifically the following commit:
>
> 28a903f63e ("locking/lockdep: Handle non(or multi)-acquisition of a crosslock")
Because the final v4.14 release is close, disable the cross-release lockdep
features for now.
Bisected-by: Johan Hovold <johan@kernel.org>
Debugged-by: Johan Hovold <johan@kernel.org>
Reported-by: Johan Hovold <johan@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Lindgren <tony@atomide.com>
Cc: kernel-team@lge.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mm@kvack.org
Cc: linux-omap@vger.kernel.org
Link: http://lkml.kernel.org/r/20171014072659.f2yr6mhm5ha3eou7@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull MIPS fixes from Ralf Baechle:
"More MIPS fixes for 4.14:
- Loongson 1: Set the default number of RX and TX queues to
accomodate for recent changes of stmmac driver.
- BPF: Fix uninitialised target compiler error.
- Fix cmpxchg on 32 bit signed ints for 64 bit kernels with
!kernel_uses_llsc
- Fix generic-board-config.sh for builds using O=
- Remove pr_err() calls from fpu_emu() for a case which is not a
kernel error"
* '4.14-fixes' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: math-emu: Remove pr_err() calls from fpu_emu()
MIPS: Fix generic-board-config.sh for builds using O=
MIPS: Fix cmpxchg on 32b signed ints for 64b kernel with !kernel_uses_llsc
MIPS: loongson1: set default number of rx and tx queues for stmmac
MIPS: bpf: Fix uninitialised target compiler error
Since commit:
94b1b03b51 ("x86/mm: Rework lazy TLB mode and TLB freshness tracking")
x86's lazy TLB mode has been all the way lazy: when running a kernel thread
(including the idle thread), the kernel keeps using the last user mm's
page tables without attempting to maintain user TLB coherence at all.
From a pure semantic perspective, this is fine -- kernel threads won't
attempt to access user pages, so having stale TLB entries doesn't matter.
Unfortunately, I forgot about a subtlety. By skipping TLB flushes,
we also allow any paging-structure caches that may exist on the CPU
to become incoherent. This means that we can have a
paging-structure cache entry that references a freed page table, and
the CPU is within its rights to do a speculative page walk starting
at the freed page table.
I can imagine this causing two different problems:
- A speculative page walk starting from a bogus page table could read
IO addresses. I haven't seen any reports of this causing problems.
- A speculative page walk that involves a bogus page table can install
garbage in the TLB. Such garbage would always be at a user VA, but
some AMD CPUs have logic that triggers a machine check when it notices
these bogus entries. I've seen a couple reports of this.
Boris further explains the failure mode:
> It is actually more of an optimization which assumes that paging-structure
> entries are in WB DRAM:
>
> "TlbCacheDis: cacheable memory disable. Read-write. 0=Enables
> performance optimization that assumes PML4, PDP, PDE, and PTE entries
> are in cacheable WB-DRAM; memory type checks may be bypassed, and
> addresses outside of WB-DRAM may result in undefined behavior or NB
> protocol errors. 1=Disables performance optimization and allows PML4,
> PDP, PDE and PTE entries to be in any memory type. Operating systems
> that maintain page tables in memory types other than WB- DRAM must set
> TlbCacheDis to insure proper operation."
>
> The MCE generated is an NB protocol error to signal that
>
> "Link: A specific coherent-only packet from a CPU was issued to an
> IO link. This may be caused by software which addresses page table
> structures in a memory type other than cacheable WB-DRAM without
> properly configuring MSRC001_0015[TlbCacheDis]. This may occur, for
> example, when page table structure addresses are above top of memory. In
> such cases, the NB will generate an MCE if it sees a mismatch between
> the memory operation generated by the core and the link type."
>
> I'm assuming coherent-only packets don't go out on IO links, thus the
> error.
To fix this, reinstate TLB coherence in lazy mode. With this patch
applied, we do it in one of two ways:
- If we have PCID, we simply switch back to init_mm's page tables
when we enter a kernel thread -- this seems to be quite cheap
except for the cost of serializing the CPU.
- If we don't have PCID, then we set a flag and switch to init_mm
the first time we would otherwise need to flush the TLB.
The /sys/kernel/debug/x86/tlb_use_lazy_mode debug switch can be changed
to override the default mode for benchmarking.
In theory, we could optimize this better by only flushing the TLB in
lazy CPUs when a page table is freed. Doing that would require
auditing the mm code to make sure that all page table freeing goes
through tlb_remove_page() as well as reworking some data structures
to implement the improved flush logic.
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Reported-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Johannes Hirte <johannes.hirte@datenkhaos.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Roman Kagan <rkagan@virtuozzo.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 94b1b03b51 ("x86/mm: Rework lazy TLB mode and TLB freshness tracking")
Link: http://lkml.kernel.org/r/20171009170231.fkpraqokz6e4zeco@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=yrkB
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-for-v4.14-rc5' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Couple of the arm people seem to wake up so this has imx and msm
fixes, along with a bunch of i915 stable bounds fixes and an amdgpu
regression fix.
All seems pretty okay for now"
* tag 'drm-fixes-for-v4.14-rc5' of git://people.freedesktop.org/~airlied/linux:
drm/msm: fix _NO_IMPLICIT fencing case
drm/msm: fix error path cleanup
drm/msm/mdp5: Remove extra pm_runtime_put call in mdp5_crtc_cursor_set()
drm/msm/dsi: Use correct pm_runtime_put variant during host_init
drm/msm: fix return value check in _msm_gem_kernel_new()
drm/msm: use proper memory barriers for updating tail/head
drm/msm/mdp5: add missing max size for 8x74 v1
drm/amdgpu: fix placement flags in amdgpu_ttm_bind
drm/i915/bios: parse DDI ports also for CHV for HDMI DDC pin and DP AUX channel
gpu: ipu-v3: pre: implement workaround for ERR009624
gpu: ipu-v3: prg: wait for double buffers to be filled on channel startup
gpu: ipu-v3: Allow channel burst locking on i.MX6 only
drm/i915: Read timings from the correct transcoder in intel_crtc_mode_get()
drm/i915: Order two completing nop_submit_request
drm/i915: Silence compiler warning for hsw_power_well_enable()
drm/i915: Use crtc_state_is_legacy_gamma in intel_color_check
drm/i915/edp: Increase the T12 delay quirk to 1300ms
drm/i915/edp: Get the Panel Power Off timestamp after panel is off
sync_file: Return consistent status in SYNC_IOC_FILE_INFO
drm/atomic: Unref duplicated drm_atomic_state in drm_atomic_helper_resume()
drm/i915 fixes for 4.14-rc5:
Three fixes for stable:
- Use crtc_state_is_legacy_gamma in intel_color_check (Maarten)
- Read timings from the correct transcoder (Ville).
- Fix HDMI on BSW (Jani).
Other fixes:
- eDP fixes (Manasi)
- Silence compiler warnings (Chris)
- Order two completing nop_submit_request (Chris)
* tag 'drm-intel-fixes-2017-10-11' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915/bios: parse DDI ports also for CHV for HDMI DDC pin and DP AUX channel
drm/i915: Read timings from the correct transcoder in intel_crtc_mode_get()
drm/i915: Order two completing nop_submit_request
drm/i915: Silence compiler warning for hsw_power_well_enable()
drm/i915: Use crtc_state_is_legacy_gamma in intel_color_check
drm/i915/edp: Increase the T12 delay quirk to 1300ms
drm/i915/edp: Get the Panel Power Off timestamp after panel is off
bunch of msm fixes
* 'msm-fixes-4.14-rc4' of git://people.freedesktop.org/~robclark/linux:
drm/msm: fix _NO_IMPLICIT fencing case
drm/msm: fix error path cleanup
drm/msm/mdp5: Remove extra pm_runtime_put call in mdp5_crtc_cursor_set()
drm/msm/dsi: Use correct pm_runtime_put variant during host_init
drm/msm: fix return value check in _msm_gem_kernel_new()
drm/msm: use proper memory barriers for updating tail/head
drm/msm/mdp5: add missing max size for 8x74 v1
Merge misc fixes from Andrew Morton:
"18 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm, swap: use page-cluster as max window of VMA based swap readahead
mm: page_vma_mapped: ensure pmd is loaded with READ_ONCE outside of lock
kmemleak: clear stale pointers from task stacks
fs/binfmt_misc.c: node could be NULL when evicting inode
fs/mpage.c: fix mpage_writepage() for pages with buffers
linux/kernel.h: add/correct kernel-doc notation
tty: fall back to N_NULL if switching to N_TTY fails during hangup
Revert "vmalloc: back off when the current task is killed"
mm/cma.c: take __GFP_NOWARN into account in cma_alloc()
scripts/kallsyms.c: ignore symbol type 'n'
userfaultfd: selftest: exercise -EEXIST only in background transfer
mm: only display online cpus of the numa node
mm: remove unnecessary WARN_ONCE in page_vma_mapped_walk().
mm/mempolicy: fix NUMA_INTERLEAVE_HIT counter
include/linux/of.h: provide of_n_{addr,size}_cells wrappers for !CONFIG_OF
mm/madvise.c: add description for MADV_WIPEONFORK and MADV_KEEPONFORK
lib/Kconfig.debug: kernel hacking menu: runtime testing: keep tests together
mm/migrate: fix indexing bug (off by one) and avoid out of bound access
When the VMA based swap readahead was introduced, a new knob
/sys/kernel/mm/swap/vma_ra_max_order
was added as the max window of VMA swap readahead. This is to make it
possible to use different max window for VMA based readahead and
original physical readahead. But Minchan Kim pointed out that this will
cause a regression because setting page-cluster sysctl to zero cannot
disable swap readahead with the change.
To fix the regression, the page-cluster sysctl is used as the max window
of both the VMA based swap readahead and original physical swap
readahead. If more fine grained control is needed in the future, more
knobs can be added as the subordinate knobs of the page-cluster sysctl.
The vma_ra_max_order knob is deleted. Because the knob was introduced
in v4.14-rc1, and this patch is targeting being merged before v4.14
releasing, there should be no existing users of this newly added ABI.
Link: http://lkml.kernel.org/r/20171011070847.16003-1-ying.huang@intel.com
Fixes: ec560175c0 ("mm, swap: VMA based swap readahead")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reported-by: Minchan Kim <minchan@kernel.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Loading the pmd without holding the pmd_lock exposes us to races with
concurrent updaters of the page tables but, worse still, it also allows
the compiler to cache the pmd value in a register and reuse it later on,
even if we've performed a READ_ONCE in between and seen a more recent
value.
In the case of page_vma_mapped_walk, this leads to the following crash
when the pmd loaded for the initial pmd_trans_huge check is all zeroes
and a subsequent valid table entry is loaded by check_pmd. We then
proceed into map_pte, but the compiler re-uses the zero entry inside
pte_offset_map, resulting in a junk pointer being installed in
pvmw->pte:
PC is at check_pte+0x20/0x170
LR is at page_vma_mapped_walk+0x2e0/0x540
[...]
Process doio (pid: 2463, stack limit = 0xffff00000f2e8000)
Call trace:
check_pte+0x20/0x170
page_vma_mapped_walk+0x2e0/0x540
page_mkclean_one+0xac/0x278
rmap_walk_file+0xf0/0x238
rmap_walk+0x64/0xa0
page_mkclean+0x90/0xa8
clear_page_dirty_for_io+0x84/0x2a8
mpage_submit_page+0x34/0x98
mpage_process_page_bufs+0x164/0x170
mpage_prepare_extent_to_map+0x134/0x2b8
ext4_writepages+0x484/0xe30
do_writepages+0x44/0xe8
__filemap_fdatawrite_range+0xbc/0x110
file_write_and_wait_range+0x48/0xd8
ext4_sync_file+0x80/0x4b8
vfs_fsync_range+0x64/0xc0
SyS_msync+0x194/0x1e8
This patch fixes the problem by ensuring that READ_ONCE is used before
the initial checks on the pmd, and this value is subsequently used when
checking whether or not the pmd is present. pmd_check is removed and
the pmd_present check is inlined directly.
Link: http://lkml.kernel.org/r/1507222630-5839-1-git-send-email-will.deacon@arm.com
Fixes: f27176cfc3 ("mm: convert page_mkclean_one() to use page_vma_mapped_walk()")
Signed-off-by: Will Deacon <will.deacon@arm.com>
Tested-by: Yury Norov <ynorov@caviumnetworks.com>
Tested-by: Richard Ruigrok <rruigrok@codeaurora.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
inode->i_private is assigned by a Node pointer only after registering a
new binary format, so it could be NULL if inode was created by
bm_fill_super() (or iput() was called by the error path in
bm_register_write()), and this could result in NULL pointer dereference
when evicting such an inode. e.g. mount binfmt_misc filesystem then
umount it immediately:
mount -t binfmt_misc binfmt_misc /proc/sys/fs/binfmt_misc
umount /proc/sys/fs/binfmt_misc
will result in
BUG: unable to handle kernel NULL pointer dereference at 0000000000000013
IP: bm_evict_inode+0x16/0x40 [binfmt_misc]
...
Call Trace:
evict+0xd3/0x1a0
iput+0x17d/0x1d0
dentry_unlink_inode+0xb9/0xf0
__dentry_kill+0xc7/0x170
shrink_dentry_list+0x122/0x280
shrink_dcache_parent+0x39/0x90
do_one_tree+0x12/0x40
shrink_dcache_for_umount+0x2d/0x90
generic_shutdown_super+0x1f/0x120
kill_litter_super+0x29/0x40
deactivate_locked_super+0x43/0x70
deactivate_super+0x45/0x60
cleanup_mnt+0x3f/0x70
__cleanup_mnt+0x12/0x20
task_work_run+0x86/0xa0
exit_to_usermode_loop+0x6d/0x99
syscall_return_slowpath+0xba/0xf0
entry_SYSCALL_64_fastpath+0xa3/0xa
Fix it by making sure Node (e) is not NULL.
Link: http://lkml.kernel.org/r/20171010100642.31786-1-eguan@redhat.com
Fixes: 83f918274e ("exec: binfmt_misc: shift filp_close(interp_file) from kill_node() to bm_evict_inode()")
Signed-off-by: Eryu Guan <eguan@redhat.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When using FAT on a block device which supports rw_page, we can hit
BUG_ON(!PageLocked(page)) in try_to_free_buffers(). This is because we
call clean_buffers() after unlocking the page we've written. Introduce
a new clean_page_buffers() which cleans all buffers associated with a
page and call it from within bdev_write_page().
[akpm@linux-foundation.org: s/PAGE_SIZE/~0U/ per Linus and Matthew]
Link: http://lkml.kernel.org/r/20171006211541.GA7409@bombadil.infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reported-by: Toshi Kani <toshi.kani@hpe.com>
Reported-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Tested-by: Toshi Kani <toshi.kani@hpe.com>
Acked-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add kernel-doc notation for some macros. Correct kernel-doc comments &
typos for a few macros.
Link: http://lkml.kernel.org/r/76fa1403-1511-be4c-e9c4-456b43edfad3@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hans Verkuil