- support for rbd object-map and fast-diff features (myself). This
will speed up reads, discards and things like snap diffs on sparse
images.
- ceph.snap.btime vxattr to expose snapshot creation time (David
Disseldorp). This will be used to integrate with "Restore Previous
Versions" feature added in Windows 7 for folks who reexport ceph
through SMB.
- security xattrs for ceph (Zheng Yan). Only selinux is supported
for now due to the limitations of ->dentry_init_security().
- support for MSG_ADDR2, FS_BTIME and FS_CHANGE_ATTR features (Jeff
Layton). This is actually a single feature bit which was missing
because of the filesystem pieces. With this in, the kernel client
will finally be reported as "luminous" by "ceph features" -- it is
still being reported as "jewel" even though all required Luminous
features were implemented in 4.13.
- stop NULL-terminating ceph vxattrs (Jeff Layton). The convention
with xattrs is to not terminate and this was causing inconsistencies
with ceph-fuse.
- change filesystem time granularity from 1 us to 1 ns, again fixing
an inconsistency with ceph-fuse (Luis Henriques).
On top of this there are some additional dentry name handling and cap
flushing fixes from Zheng. Finally, Jeff is formally taking over for
Zheng as the filesystem maintainer.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl0u+X8THGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi9byB/9fIxzoxtDMvixtJabuGSJRtlijDlWF
GlO6yIWCXl/8v8easR2PCF75U/xv0+QFQmze8PVi8u4Xz589P247NnEuyEZ9n84i
aCavARho6QLZPEL+B04NaqoHBl+ORKQTA6eKGhyKwRp/rn83z5Ubuw2tN7krHT3b
kCY61FuTQGxNY2o/WKv/iLwINYr7H23hCf0WwyyKH1bp7OegiQ14Ebn1NtfS3sMx
hS6h8Ya826vmUW0bCSS/9kzKYBCjksTig0HphUOHq6BoZJs++0b7GukIulRyuLfD
J9Gr9HGPoDCVzdmFfpn2FSlxdmqfO9amUSagd0ftLQfFlPlrpoULi0GW
=Bgxr
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.3-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"Lots of exciting things this time!
- support for rbd object-map and fast-diff features (myself). This
will speed up reads, discards and things like snap diffs on sparse
images.
- ceph.snap.btime vxattr to expose snapshot creation time (David
Disseldorp). This will be used to integrate with "Restore Previous
Versions" feature added in Windows 7 for folks who reexport ceph
through SMB.
- security xattrs for ceph (Zheng Yan). Only selinux is supported for
now due to the limitations of ->dentry_init_security().
- support for MSG_ADDR2, FS_BTIME and FS_CHANGE_ATTR features (Jeff
Layton). This is actually a single feature bit which was missing
because of the filesystem pieces. With this in, the kernel client
will finally be reported as "luminous" by "ceph features" -- it is
still being reported as "jewel" even though all required Luminous
features were implemented in 4.13.
- stop NULL-terminating ceph vxattrs (Jeff Layton). The convention
with xattrs is to not terminate and this was causing
inconsistencies with ceph-fuse.
- change filesystem time granularity from 1 us to 1 ns, again fixing
an inconsistency with ceph-fuse (Luis Henriques).
On top of this there are some additional dentry name handling and cap
flushing fixes from Zheng. Finally, Jeff is formally taking over for
Zheng as the filesystem maintainer"
* tag 'ceph-for-5.3-rc1' of git://github.com/ceph/ceph-client: (71 commits)
ceph: fix end offset in truncate_inode_pages_range call
ceph: use generic_delete_inode() for ->drop_inode
ceph: use ceph_evict_inode to cleanup inode's resource
ceph: initialize superblock s_time_gran to 1
MAINTAINERS: take over for Zheng as CephFS kernel client maintainer
rbd: setallochint only if object doesn't exist
rbd: support for object-map and fast-diff
rbd: call rbd_dev_mapping_set() from rbd_dev_image_probe()
libceph: export osd_req_op_data() macro
libceph: change ceph_osdc_call() to take page vector for response
libceph: bump CEPH_MSG_MAX_DATA_LEN (again)
rbd: new exclusive lock wait/wake code
rbd: quiescing lock should wait for image requests
rbd: lock should be quiesced on reacquire
rbd: introduce copyup state machine
rbd: rename rbd_obj_setup_*() to rbd_obj_init_*()
rbd: move OSD request allocation into object request state machines
rbd: factor out __rbd_osd_setup_discard_ops()
rbd: factor out rbd_osd_setup_copyup()
rbd: introduce obj_req->osd_reqs list
...
Commit e450f4d1a5 ("ceph: pass inclusive lend parameter to
filemap_write_and_wait_range()") fixed the end offset parameter used to
call filemap_write_and_wait_range and invalidate_inode_pages2_range.
Unfortunately it missed truncate_inode_pages_range, introducing a
regression that is easily detected by xfstest generic/130.
The problem is that when doing direct IO it is possible that an extra page
is truncated from the page cache when the end offset is page aligned.
This can cause data loss if that page hasn't been sync'ed to the OSDs.
While there, change code to use PAGE_ALIGN macro instead.
Cc: stable@vger.kernel.org
Fixes: e450f4d1a5 ("ceph: pass inclusive lend parameter to filemap_write_and_wait_range()")
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This list item remained from when we had safe and unsafe replies
(commit vs ack). It has since become a private list item for use by
clients.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
We don't set SB_I_VERSION on ceph since we need to manage it ourselves,
so we must increment it whenever we update the file times.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When creating new file/directory, use security_dentry_init_security() to
prepare selinux context for the new inode, then send openc/mkdir request
to MDS, together with selinux xattr.
security_dentry_init_security() only supports single security module and
only selinux has dentry_init_security hook. So only selinux is supported
for now. We can add support for other security modules once kernel has a
generic version of dentry_init_security()
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Also rename ceph_release_acls_info() to ceph_release_acl_sec_ctx().
And move their definitions to different files. This is preparation
for security label support.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
We want to enable cross-filesystem copy_file_range functionality
where possible, so push the "same superblock only" checks down to
the individual filesystem callouts so they can make their own
decisions about cross-superblock copy offload and fallack to
generic_copy_file_range() for cross-superblock copy.
[Amir] We do not call ->remap_file_range() in case the files are not
on the same sb and do not call ->copy_file_range() in case the files
do not belong to the same filesystem driver.
This changes behavior of the copy_file_range(2) syscall, which will
now allow cross filesystem in-kernel copy. CIFS already supports
cross-superblock copy, between two shares to the same server. This
functionality will now be available via the copy_file_range(2) syscall.
Cc: Steve French <stfrench@microsoft.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that we have generic_copy_file_range(), remove it as a fallback
case when offloads fail. This puts the responsibility for executing
fallbacks on the filesystems that implement ->copy_file_range and
allows us to add operational validity checks to
generic_copy_file_range().
Rework vfs_copy_file_range() to call a new do_copy_file_range()
helper to execute the copying callout, and move calls to
generic_file_copy_range() into filesystem methods where they
currently return failures.
[Amir] overlayfs is not responsible of executing the fallback.
It is the responsibility of the underlying filesystem.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We have three workqueue for inode works. Later patch will introduce
one more work for inode. It's not good to introcuce more workqueue
and add more 'struct work_struct' to 'struct ceph_inode_info'.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
- a fix to enforce quotas set above the mount point (Luis Henriques)
- support for exporting snapshots through NFS (Zheng Yan)
- proper statx implementation (Jeff Layton). statx flags are mapped
to MDS caps, with AT_STATX_{DONT,FORCE}_SYNC taken into account.
- some follow-up dentry name handling fixes, in particular elimination
of our hand-rolled helper and the switch to __getname() as suggested
by Al (Jeff Layton)
- a set of MDS client cleanups in preparation for async MDS requests
in the future (Jeff Layton)
- a fix to sync the filesystem before remounting (Jeff Layton)
On the rbd side, work is on-going on object-map and fast-diff image
features.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAlzdgEkTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi2w0B/9AsskuQezu8HP0NumCNfdgfI02r6d1
1ZixMp6q8AAtOZYHP0bmiLzaETwC3+sRkD+8nX5DWuFISyjkTlRn8f7wnoziWkBT
bBmL21fufkSKXN41VFCdolAbUPCKuA8+Fr7YE2hCl517ejbf47W+htv7+a56eTiR
iAiDyVYokB8sj7WTVW6ET4HJTvJly1Z4QUNmy9Ljfzc8AvL2LFLOe6FRsJtIThdx
aE00RX9EQsKO2v9ROd6jDmZocg50TvFmgF14A5GFfMmFrxJuri2yEI4iZd3hSKu2
yZ+fBWmRy4E9w5E20qufrM+bSVjA+Zi7aiTMriaBm54aYtflgJ5gxhFI
=68dZ
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.2-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"On the filesystem side we have:
- a fix to enforce quotas set above the mount point (Luis Henriques)
- support for exporting snapshots through NFS (Zheng Yan)
- proper statx implementation (Jeff Layton). statx flags are mapped
to MDS caps, with AT_STATX_{DONT,FORCE}_SYNC taken into account.
- some follow-up dentry name handling fixes, in particular
elimination of our hand-rolled helper and the switch to __getname()
as suggested by Al (Jeff Layton)
- a set of MDS client cleanups in preparation for async MDS requests
in the future (Jeff Layton)
- a fix to sync the filesystem before remounting (Jeff Layton)
On the rbd side, work is on-going on object-map and fast-diff image
features"
* tag 'ceph-for-5.2-rc1' of git://github.com/ceph/ceph-client: (29 commits)
ceph: flush dirty inodes before proceeding with remount
ceph: fix unaligned access in ceph_send_cap_releases
libceph: make ceph_pr_addr take an struct ceph_entity_addr pointer
libceph: fix unaligned accesses in ceph_entity_addr handling
rbd: don't assert on writes to snapshots
rbd: client_mutex is never nested
ceph: print inode number in __caps_issued_mask debugging messages
ceph: just call get_session in __ceph_lookup_mds_session
ceph: simplify arguments and return semantics of try_get_cap_refs
ceph: fix comment over ceph_drop_caps_for_unlink
ceph: move wait for mds request into helper function
ceph: have ceph_mdsc_do_request call ceph_mdsc_submit_request
ceph: after an MDS request, do callback and completions
ceph: use pathlen values returned by set_request_path_attr
ceph: use __getname/__putname in ceph_mdsc_build_path
ceph: use ceph_mdsc_build_path instead of clone_dentry_name
ceph: fix potential use-after-free in ceph_mdsc_build_path
ceph: dump granular cap info in "caps" debugfs file
ceph: make iterate_session_caps a public symbol
ceph: fix NULL pointer deref when debugging is enabled
...
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
This patch fixes the following warnings:
fs/affs/affs.h:124:38: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/configfs/dir.c:1692:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/configfs/dir.c:1694:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ceph/file.c:249:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext4/hash.c:233:15: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext4/hash.c:246:15: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext2/inode.c:1237:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext2/inode.c:1244:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext4/indirect.c:1182:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext4/indirect.c:1188:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext4/indirect.c:1432:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext4/indirect.c:1440:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/f2fs/node.c:618:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/f2fs/node.c:620:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/btrfs/ref-verify.c:522:15: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/gfs2/bmap.c:711:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/gfs2/bmap.c:722:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/jffs2/fs.c:339:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/nfsd/nfs4proc.c:429:12: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ufs/util.h:62:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ufs/util.h:43:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/fcntl.c:770:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/seq_file.c:319:10: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/libfs.c:148:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/libfs.c:150:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/signalfd.c:178:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/locks.c:1473:16: warning: this statement may fall through [-Wimplicit-fallthrough=]
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enabling
-Wimplicit-fallthrough.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
The 'lend' parameter of filemap_write_and_wait_range is required to be
inclusive, so follow the rule. Same for invalidate_inode_pages2_range.
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If we try to copy into a file that was just written, any data that is
remote copied will be overwritten by our buffered writes once they are
flushed. When this happens, the call to invalidate_inode_pages2_range
will also return a -EBUSY error.
This patch fixes this by also sync'ing the destination file before
starting any copy.
Fixes: 503f82a993 ("ceph: support copy_file_range file operation")
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Pull AFS updates from Al Viro:
"AFS series, with some iov_iter bits included"
* 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits)
missing bits of "iov_iter: Separate type from direction and use accessor functions"
afs: Probe multiple fileservers simultaneously
afs: Fix callback handling
afs: Eliminate the address pointer from the address list cursor
afs: Allow dumping of server cursor on operation failure
afs: Implement YFS support in the fs client
afs: Expand data structure fields to support YFS
afs: Get the target vnode in afs_rmdir() and get a callback on it
afs: Calc callback expiry in op reply delivery
afs: Fix FS.FetchStatus delivery from updating wrong vnode
afs: Implement the YFS cache manager service
afs: Remove callback details from afs_callback_break struct
afs: Commit the status on a new file/dir/symlink
afs: Increase to 64-bit volume ID and 96-bit vnode ID for YFS
afs: Don't invoke the server to read data beyond EOF
afs: Add a couple of tracepoints to log I/O errors
afs: Handle EIO from delivery function
afs: Fix TTL on VL server and address lists
afs: Implement VL server rotation
afs: Improve FS server rotation error handling
...
In the iov_iter struct, separate the iterator type from the iterator
direction and use accessor functions to access them in most places.
Convert a bunch of places to use switch-statements to access them rather
then chains of bitwise-AND statements. This makes it easier to add further
iterator types. Also, this can be more efficient as to implement a switch
of small contiguous integers, the compiler can use ~50% fewer compare
instructions than it has to use bitwise-and instructions.
Further, cease passing the iterator type into the iterator setup function.
The iterator function can set that itself. Only the direction is required.
Signed-off-by: David Howells <dhowells@redhat.com>
Use accessor functions to access an iterator's type and direction. This
allows for the possibility of using some other method of determining the
type of iterator than if-chains with bitwise-AND conditions.
Signed-off-by: David Howells <dhowells@redhat.com>
Add a new mount option 'nocopyfrom' that will prevent the usage of the
RADOS 'copy-from' operation in cephfs. This could be useful, for example,
for an administrator to temporarily mitigate any possible bugs in the
'copy-from' implementation.
Currently, only copy_file_range uses this RADOS operation. Setting this
mount option will result in this syscall reverting to the default VFS
implementation, i.e. to perform the copies locally instead of doing remote
object copies.
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This commit implements support for the copy_file_range syscall in cephfs.
It is implemented using the RADOS 'copy-from' operation, which allows to
do a remote object copy, without the need to download/upload data from/to
the OSDs.
Some manual copy may however be required if the source/destination file
offsets aren't object aligned or if the copy length is smaller than the
object size.
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The current requirement is that ceph_osdc_alloc_messages() should be
called after oid and oloc are known. In preparation for preallocating
message data items, move ceph_osdc_alloc_messages() further down, so
that it is called when OSD op codes are known.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Current implementation of cephfs fallocate isn't correct as it doesn't
really reserve the space in the cluster, which means that a subsequent
call to a write may actually fail due to lack of space. In fact, it is
currently possible to fallocate an amount space that is larger than the
free space in the cluster. It has behaved this way since the initial
commit ad7a60de88 ("ceph: punch hole support").
Since there's no easy solution to fix this at the moment, this patch
simply removes support for all fallocate operations but
FALLOC_FL_PUNCH_HOLE (which implies FALLOC_FL_KEEP_SIZE).
Link: https://tracker.ceph.com/issues/36317
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Avoid allocating memory for the entire user request: striped_read()
does a synchronous OSD request per object, so it doesn't need more than
object size worth of pages at a time.
[ Preserve the comment, changelog. ]
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
basic support for rbd images within namespaces (myself). Also included
y2038 conversion patches from Arnd, a pile of miscellaneous fixes from
Chengguang and Zheng's feature bit infrastructure for the filesystem.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAlt62CkTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzizfhB/0c/rz6frunc6EcZMWuBNzlOIOktJ/m
MEbPGjCxMAsmidO1rqHHYF4iEN5hr+3AWTbtIL2m6wkqYVdg3FjmNaAYB27AdQMG
kH9bLfrKIew72/NZqXfm25yjY/86kIt8t91kay4Lchc97tSYhnFSnku7iAX2HTND
TMhq/1O/GvEyw/RmqnenJEQqFJvKnfgPPQm6W8sM2bH0T5j+EXmDT/Rv+90LogFR
J4+pZkHqDfvyMb1WJ5MkumohytbRVzRNKcMpOvjquJSqUgtgZa2JdrIsypDqSNKY
nUT6jGGlxoSbHCqRwDJoFEJOlh5A9RwKqYxNuM2a/vs9u7HpvdCK/Iah
=AtgY
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-4.19-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"The main things are support for cephx v2 authentication protocol and
basic support for rbd images within namespaces (myself).
Also included are y2038 conversion patches from Arnd, a pile of
miscellaneous fixes from Chengguang and Zheng's feature bit
infrastructure for the filesystem"
* tag 'ceph-for-4.19-rc1' of git://github.com/ceph/ceph-client: (40 commits)
ceph: don't drop message if it contains more data than expected
ceph: support cephfs' own feature bits
crush: fix using plain integer as NULL warning
libceph: remove unnecessary non NULL check for request_key
ceph: refactor error handling code in ceph_reserve_caps()
ceph: refactor ceph_unreserve_caps()
ceph: change to void return type for __do_request()
ceph: compare fsc->max_file_size and inode->i_size for max file size limit
ceph: add additional size check in ceph_setattr()
ceph: add additional offset check in ceph_write_iter()
ceph: add additional range check in ceph_fallocate()
ceph: add new field max_file_size in ceph_fs_client
libceph: weaken sizeof check in ceph_x_verify_authorizer_reply()
libceph: check authorizer reply/challenge length before reading
libceph: implement CEPHX_V2 calculation mode
libceph: add authorizer challenge
libceph: factor out encrypt_authorizer()
libceph: factor out __ceph_x_decrypt()
libceph: factor out __prepare_write_connect()
libceph: store ceph_auth_handshake pointer in ceph_connection
...
In ceph_llseek(), we compare fsc->max_file_size and inode->i_size to
choose max file size limit.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If the offset is larger or equal to both real file size and
max file size, then return -EFBIG.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If the range is larger than both real file size and limit of
max file size, then return -EFBIG.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The request mtime field is used all over ceph, and is currently
represented as a 'timespec' structure in Linux. This changes it to
timespec64 to allow times beyond 2038, modifying all users at the
same time.
[ Remove now redundant ts variable in writepage_nounlock(). ]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Parallel to FILE_CREATED, goes into ->f_mode instead of *opened.
NFS is a bit of a wart here - it doesn't have file at the point
where FILE_CREATED used to be set, so we need to propagate it
there (for now). IMA is another one (here and everywhere)...
Note that this needs do_dentry_open() to leave old bits in ->f_mode
alone - we want it to preserve FMODE_CREATED if it had been already
set (no other bit can be there).
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This is a late set of changes from Deepa Dinamani doing an automated
treewide conversion of the inode and iattr structures from 'timespec'
to 'timespec64', to push the conversion from the VFS layer into the
individual file systems.
There were no conflicts between this and the contents of linux-next
until just before the merge window, when we saw multiple problems:
- A minor conflict with my own y2038 fixes, which I could address
by adding another patch on top here.
- One semantic conflict with late changes to the NFS tree. I addressed
this by merging Deepa's original branch on top of the changes that
now got merged into mainline and making sure the merge commit includes
the necessary changes as produced by coccinelle.
- A trivial conflict against the removal of staging/lustre.
- Multiple conflicts against the VFS changes in the overlayfs tree.
These are still part of linux-next, but apparently this is no longer
intended for 4.18 [1], so I am ignoring that part.
As Deepa writes:
The series aims to switch vfs timestamps to use struct timespec64.
Currently vfs uses struct timespec, which is not y2038 safe.
The series involves the following:
1. Add vfs helper functions for supporting struct timepec64 timestamps.
2. Cast prints of vfs timestamps to avoid warnings after the switch.
3. Simplify code using vfs timestamps so that the actual
replacement becomes easy.
4. Convert vfs timestamps to use struct timespec64 using a script.
This is a flag day patch.
Next steps:
1. Convert APIs that can handle timespec64, instead of converting
timestamps at the boundaries.
2. Update internal data structures to avoid timestamp conversions.
Thomas Gleixner adds:
I think there is no point to drag that out for the next merge window.
The whole thing needs to be done in one go for the core changes which
means that you're going to play that catchup game forever. Let's get
over with it towards the end of the merge window.
[1] https://www.spinics.net/lists/linux-fsdevel/msg128294.html
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CZX2
-----END PGP SIGNATURE-----
Merge tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground
Pull inode timestamps conversion to timespec64 from Arnd Bergmann:
"This is a late set of changes from Deepa Dinamani doing an automated
treewide conversion of the inode and iattr structures from 'timespec'
to 'timespec64', to push the conversion from the VFS layer into the
individual file systems.
As Deepa writes:
'The series aims to switch vfs timestamps to use struct timespec64.
Currently vfs uses struct timespec, which is not y2038 safe.
The series involves the following:
1. Add vfs helper functions for supporting struct timepec64
timestamps.
2. Cast prints of vfs timestamps to avoid warnings after the switch.
3. Simplify code using vfs timestamps so that the actual replacement
becomes easy.
4. Convert vfs timestamps to use struct timespec64 using a script.
This is a flag day patch.
Next steps:
1. Convert APIs that can handle timespec64, instead of converting
timestamps at the boundaries.
2. Update internal data structures to avoid timestamp conversions'
Thomas Gleixner adds:
'I think there is no point to drag that out for the next merge
window. The whole thing needs to be done in one go for the core
changes which means that you're going to play that catchup game
forever. Let's get over with it towards the end of the merge window'"
* tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground:
pstore: Remove bogus format string definition
vfs: change inode times to use struct timespec64
pstore: Convert internal records to timespec64
udf: Simplify calls to udf_disk_stamp_to_time
fs: nfs: get rid of memcpys for inode times
ceph: make inode time prints to be long long
lustre: Use long long type to print inode time
fs: add timespec64_truncate()
The intent behind making it a per-request setting was that it would be
set for writes, but not for reads. As it is, the flag is set for all
fs/ceph requests except for pool perm check stat request (technically
a read).
ceph_osdc_abort_on_full() skips reads since the previous commit and
I don't see a use case for marking individual requests.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
dio_get_pagev_size() and dio_get_pages_alloc() introduced in commit
b5b98989dc ("ceph: combine as many iovec as possile into one OSD
request") assume that the passed iov_iter is ITER_IOVEC. This isn't
the case with splice where it ends up poking into the guts of ITER_BVEC
or ITER_PIPE iterators, causing lockups and crashes easily reproduced
with generic/095.
Rather than trying to figure out gap alignment and stuff pages into
a page vector, add a helper for going from iov_iter to a bio_vec array
and make use of the new CEPH_OSD_DATA_TYPE_BVECS code.
Fixes: b5b98989dc ("ceph: combine as many iovec as possile into one OSD request")
Link: http://tracker.ceph.com/issues/18130
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Tested-by: Luis Henriques <lhenriques@suse.com>
rsize/wsize cap should be applied before ceph_osdc_new_request() is
called. Otherwise, if the size is limited by the cap instead of the
stripe unit, ceph_osdc_new_request() would setup an extent op that is
bigger than what dio_get_pages_alloc() would pin and add to the page
vector, triggering asserts in the messenger.
Cc: stable@vger.kernel.org
Fixes: 95cca2b44e ("ceph: limit osd write size")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
When we're reaching the ceph.quota.max_bytes limit, i.e., when writing
more than 1/16th of the space left in a quota realm, update the MDS with
the new file size.
This mirrors the fuse-client approach with commit 122c50315ed1 ("client:
Inform mds file size when approaching quota limit"), in the ceph git tree.
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This patch adds support for the max_files quota. It hooks into all the
ceph functions that add new filesystem objects that need to be checked
against the quota limits. When these limits are hit, -EDQUOT is returned.
Note that we're not checking quotas on ceph_link(). ceph_link doesn't
really create a new inode, and since the MDS doesn't update the directory
statistics when a new (hard) link is created (only with symlinks), they
are not accounted as a new file.
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In current code, regular file and directory use same struct
ceph_file_info to store fs specific data so the struct has to
include some fields which are only used for directory
(e.g., readdir related info), when having plenty of regular files,
it will lead to memory waste.
This patch introduces dedicated ceph_dir_file_info cache for
readdir related thins. So that regular file does not include those
unused fields anymore.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Variable name ci is mostly used for ceph_inode_info.
Variable name fi is mostly used for ceph_file_info.
Variable name cf is mostly used for ceph_cap_flush.
Change variable name to follow above common rules
in case of confusing.
Signed-off-by: Chengguang Xu <cgxu519@icloud.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Some of dout format do not include newline in the end,
fix for the files which are in fs/ceph and net/ceph directories,
and changing printk to dout for printing debug info in super.c
Signed-off-by: Chengguang Xu <cgxu519@icloud.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If a page is already locked, attempting to dirty it leads to a deadlock
in lock_page(). This is what currently happens to ITER_BVEC pages when
a dio-enabled loop device is backed by ceph:
$ losetup --direct-io /dev/loop0 /mnt/cephfs/img
$ xfs_io -c 'pread 0 4k' /dev/loop0
Follow other file systems and only dirty ITER_IOVEC pages.
Cc: stable@kernel.org
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Previously ceph_read_iter() uses current->journal to pass context info
to ceph_readpages(), so that ceph_readpages() can distinguish read(2)
from readahead(2)/fadvise(2)/madvise(2). The problem is that page fault
can happen when copying data to userspace memory. Page fault may call
other filesystem's page_mkwrite() if the userspace memory is mapped to a
file. The later filesystem may also want to use current->journal.
The fix is define a on-stack data structure in ceph_read_iter(), add it
to context list in ceph_file_info. ceph_readpages() searches the list,
find if there is a context belongs to current thread.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
MDS need to rdlock directory inode's authlock when handling these
requests. Voluntarily dropping CEPH_CAP_AUTH_EXCL avoids a cap revoke
message.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The script “checkpatch.pl” pointed information out like the following.
Comparison to NULL could be written ...
Thus fix the affected source code places.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When a user requests SEEK_HOLE or SEEK_DATA with a negative offset
ceph_llseek should return -ENXIO. Currently -EINVAL is being returned for
SEEK_DATA and 0 for SEEK_HOLE.
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Inode can be moved between snap realms. It's possible inode is moved
into a snap realm whose seq number is smaller than old snap realm's.
So there is no guarantee that seq number inode's snap context always
increases.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Linus Torvalds