mirror of https://gitee.com/openkylin/linux.git
1555 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Eric Whitney
|
a627b0a7c1 |
ext4: remove unused metadata accounting variables
Two variables in ext4_inode_info, i_reserved_meta_blocks and i_allocated_meta_blocks, are unused. Removing them saves a little memory per in-memory inode and cleans up clutter in several tracepoints. Adjust tracepoint output from ext4_alloc_da_blocks() for consistency and fix a typo and whitespace near these changes. Signed-off-by: Eric Whitney <enwlinux@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> |
|
|
Michal Hocko
|
dcda9b0471 |
mm, tree wide: replace __GFP_REPEAT by __GFP_RETRY_MAYFAIL with more useful semantic
__GFP_REPEAT was designed to allow retry-but-eventually-fail semantic to the page allocator. This has been true but only for allocations requests larger than PAGE_ALLOC_COSTLY_ORDER. It has been always ignored for smaller sizes. This is a bit unfortunate because there is no way to express the same semantic for those requests and they are considered too important to fail so they might end up looping in the page allocator for ever, similarly to GFP_NOFAIL requests. Now that the whole tree has been cleaned up and accidental or misled usage of __GFP_REPEAT flag has been removed for !costly requests we can give the original flag a better name and more importantly a more useful semantic. Let's rename it to __GFP_RETRY_MAYFAIL which tells the user that the allocator would try really hard but there is no promise of a success. This will work independent of the order and overrides the default allocator behavior. Page allocator users have several levels of guarantee vs. cost options (take GFP_KERNEL as an example) - GFP_KERNEL & ~__GFP_RECLAIM - optimistic allocation without _any_ attempt to free memory at all. The most light weight mode which even doesn't kick the background reclaim. Should be used carefully because it might deplete the memory and the next user might hit the more aggressive reclaim - GFP_KERNEL & ~__GFP_DIRECT_RECLAIM (or GFP_NOWAIT)- optimistic allocation without any attempt to free memory from the current context but can wake kswapd to reclaim memory if the zone is below the low watermark. Can be used from either atomic contexts or when the request is a performance optimization and there is another fallback for a slow path. - (GFP_KERNEL|__GFP_HIGH) & ~__GFP_DIRECT_RECLAIM (aka GFP_ATOMIC) - non sleeping allocation with an expensive fallback so it can access some portion of memory reserves. Usually used from interrupt/bh context with an expensive slow path fallback. - GFP_KERNEL - both background and direct reclaim are allowed and the _default_ page allocator behavior is used. That means that !costly allocation requests are basically nofail but there is no guarantee of that behavior so failures have to be checked properly by callers (e.g. OOM killer victim is allowed to fail currently). - GFP_KERNEL | __GFP_NORETRY - overrides the default allocator behavior and all allocation requests fail early rather than cause disruptive reclaim (one round of reclaim in this implementation). The OOM killer is not invoked. - GFP_KERNEL | __GFP_RETRY_MAYFAIL - overrides the default allocator behavior and all allocation requests try really hard. The request will fail if the reclaim cannot make any progress. The OOM killer won't be triggered. - GFP_KERNEL | __GFP_NOFAIL - overrides the default allocator behavior and all allocation requests will loop endlessly until they succeed. This might be really dangerous especially for larger orders. Existing users of __GFP_REPEAT are changed to __GFP_RETRY_MAYFAIL because they already had their semantic. No new users are added. __alloc_pages_slowpath is changed to bail out for __GFP_RETRY_MAYFAIL if there is no progress and we have already passed the OOM point. This means that all the reclaim opportunities have been exhausted except the most disruptive one (the OOM killer) and a user defined fallback behavior is more sensible than keep retrying in the page allocator. [akpm@linux-foundation.org: fix arch/sparc/kernel/mdesc.c] [mhocko@suse.com: semantic fix] Link: http://lkml.kernel.org/r/20170626123847.GM11534@dhcp22.suse.cz [mhocko@kernel.org: address other thing spotted by Vlastimil] Link: http://lkml.kernel.org/r/20170626124233.GN11534@dhcp22.suse.cz Link: http://lkml.kernel.org/r/20170623085345.11304-3-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Alex Belits <alex.belits@cavium.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: David Daney <david.daney@cavium.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: NeilBrown <neilb@suse.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Linus Torvalds
|
235b84fc86 |
Merge branch 'i2c/for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"This pull request contains:
- i2c core reorganization. One source file became too monolithic. It
is now split up, yet we still have the same named object as the
final output. This should ease maintenance.
- new drivers: ZTE ZX2967 family, ASPEED 24XX/25XX
- designware driver gained slave mode support
- xgene-slimpro driver gained ACPI support
- bigger overhaul for pca-platform driver
- the algo-bit module now supports messages with enforced STOP
- slightly bigger than usual set of driver updates and improvements
and with much appreciated quality assurance from Andy Shevchenko"
* 'i2c/for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (51 commits)
i2c: Provide a stub for i2c_detect_slave_mode()
i2c: designware: Let slave adapter support be optional
i2c: designware: Make HW init functions static
i2c: designware: fix spelling mistakes
i2c: pca-platform: propagate error from i2c_pca_add_numbered_bus
i2c: pca-platform: correctly set algo_data.reset_chip
i2c: acpi: Do not create i2c-clients for LNXVIDEO ACPI devices
i2c: designware: enable SLAVE in platform module
i2c: designware: add SLAVE mode functions
i2c: zx2967: drop COMPILE_TEST dependency
i2c: zx2967: always use the same device when printing errors
i2c: pca-platform: use dev_warn/dev_info instead of printk
i2c: pca-platform: use device managed allocations
i2c: pca-platform: add devicetree awareness
i2c: pca-platform: switch to struct gpio_desc
dt-bindings: add bindings for i2c-pca-platform
i2c: cadance: fix ctrl/addr reg write order
i2c: zx2967: add i2c controller driver for ZTE's zx2967 family
dt: bindings: add documentation for zx2967 family i2c controller
i2c: algo-bit: add support for I2C_M_STOP
...
|
|
|
Linus Torvalds
|
9967468c0a |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: - most of the rest of MM - KASAN updates - lib/ updates - checkpatch updates - some binfmt_elf changes - various misc bits * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (115 commits) kernel/exit.c: avoid undefined behaviour when calling wait4() kernel/signal.c: avoid undefined behaviour in kill_something_info binfmt_elf: safely increment argv pointers s390: reduce ELF_ET_DYN_BASE powerpc: move ELF_ET_DYN_BASE to 4GB / 4MB arm64: move ELF_ET_DYN_BASE to 4GB / 4MB arm: move ELF_ET_DYN_BASE to 4MB binfmt_elf: use ELF_ET_DYN_BASE only for PIE fs, epoll: short circuit fetching events if thread has been killed checkpatch: improve multi-line alignment test checkpatch: improve macro reuse test checkpatch: change format of --color argument to --color[=WHEN] checkpatch: silence perl 5.26.0 unescaped left brace warnings checkpatch: improve tests for multiple line function definitions checkpatch: remove false warning for commit reference checkpatch: fix stepping through statements with $stat and ctx_statement_block checkpatch: [HLP]LIST_HEAD is also declaration checkpatch: warn when a MAINTAINERS entry isn't [A-Z]:\t checkpatch: improve the unnecessary OOM message test lib/bsearch.c: micro-optimize pivot position calculation ... |
|
|
Roman Gushchin
|
422580c3ce |
mm/oom_kill.c: add tracepoints for oom reaper-related events
During the debugging of the problem described in https://lkml.org/lkml/2017/5/17/542 and fixed by Tetsuo Handa in https://lkml.org/lkml/2017/5/19/383 , I've found that the existing debug output is not really useful to understand issues related to the oom reaper. So, I assume, that adding some tracepoints might help with debugging of similar issues. Trace the following events: 1) a process is marked as an oom victim, 2) a process is added to the oom reaper list, 3) the oom reaper starts reaping process's mm, 4) the oom reaper finished reaping, 5) the oom reaper skips reaping. How it works in practice? Below is an example which show how the problem mentioned above can be found: one process is added twice to the oom_reaper list: $ cd /sys/kernel/debug/tracing $ echo "oom:mark_victim" > set_event $ echo "oom:wake_reaper" >> set_event $ echo "oom:skip_task_reaping" >> set_event $ echo "oom:start_task_reaping" >> set_event $ echo "oom:finish_task_reaping" >> set_event $ cat trace_pipe allocate-502 [001] .... 91.836405: mark_victim: pid=502 allocate-502 [001] .N.. 91.837356: wake_reaper: pid=502 allocate-502 [000] .N.. 91.871149: wake_reaper: pid=502 oom_reaper-23 [000] .... 91.871177: start_task_reaping: pid=502 oom_reaper-23 [000] .N.. 91.879511: finish_task_reaping: pid=502 oom_reaper-23 [000] .... 91.879580: skip_task_reaping: pid=502 Link: http://lkml.kernel.org/r/20170530185231.GA13412@castle Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Steven Rostedt (VMware)
|
7ab0e50ad0 |
oom, trace: remove ENUM evaluation of COMPACTION_FEEDBACK
After enabling CONFIG_TRACE_ENUM_MAP_FILE (which will soon be renamed to
CONFIG_TRACE_EVAL_MAP_FILE), I am able to examine the enums that have
been evaluated:
# cat /sys/kernel/debug/tracing/enum_map
(which will soon be renamed to eval_map)
And it showed some interesting results:
[..]
ZONE_MOVABLE 3 (oom)
ZONE_NORMAL 2 (oom)
ZONE_DMA32 1 (oom)
ZONE_DMA 0 (oom)
3 3 (oom)
2 2 (oom)
1 1 (oom)
COMPACT_PRIO_ASYNC 2 (oom)
COMPACT_PRIO_SYNC_LIGHT 1 (oom)
COMPACT_PRIO_SYNC_FULL 0 (oom)
[..]
ZONE_DMA 0 (vmscan)
3 3 (vmscan)
2 2 (vmscan)
1 1 (vmscan)
COMPACT_PRIO_ASYNC 2 (vmscan)
[..]
ZONE_DMA 0 (kmem)
3 3 (kmem)
2 2 (kmem)
1 1 (kmem)
COMPACT_PRIO_ASYNC 2 (kmem)
[..]
ZONE_DMA 0 (compaction)
3 3 (compaction)
2 2 (compaction)
1 1 (compaction)
COMPACT_PRIO_ASYNC 2 (compaction)
[..]
The name within the parenthesis are the trace systems that the enum/eval
maps are associated with. When there's a number evaluated to another
number, that tells me that the TRACE_DEFINE_ENUM() was used on a #define
and not an enum. As #defines get converted normally, they are not needed
to be evaluated.
Each of the above trace systems with the number to number evaluation
included the file include/trace/events/mmflags.h which has:
/* High-level compaction status feedback */
#define COMPACTION_FAILED 1
#define COMPACTION_WITHDRAWN 2
#define COMPACTION_PROGRESS 3
[..]
#define COMPACTION_FEEDBACK \
EM(COMPACTION_FAILED, "failed") \
EM(COMPACTION_WITHDRAWN, "withdrawn") \
EMe(COMPACTION_PROGRESS, "progress")
Which is still needed for the __print_symbolic() usage in the
trace_event. But it is not needed to be evaluated.
Removing the evaluation part removes the unnecessary evaluations of
numbers to numbers.
Link: http://lkml.kernel.org/r/20170615074944.7be9a647@gandalf.local.home
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Linus Torvalds
|
5cdd4c0468 |
for-f2fs-4.13
In this round, we've added new features such as disk quota and statx, and
modified internal bio management flow to merge more IOs depending on block
types. We've also made internal threads freezeable for Android battery life.
In addition to them, there are some patches to avoid lock contention as well
as a couple of deadlock conditions.
= Enhancement
- support usrquota, grpquota, and statx
- manage DATA/NODE typed bios separately to serialize more IOs
- modify f2fs_lock_op/wio_mutex to avoid lock contention
- prevent lock contention in migratepage
= Bug fix
- miss to load written inode flag
- fix worst case victim selection in GC
- freezeable GC and discard threads for Android battery life
- sanitize f2fs metadata to deal with security hole
- clean up sysfs-related code and docs
-----BEGIN PGP SIGNATURE-----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=N4GZ
-----END PGP SIGNATURE-----
Merge tag 'for-f2fs-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've added new features such as disk quota and statx,
and modified internal bio management flow to merge more IOs depending
on block types. We've also made internal threads freezeable for
Android battery life. In addition to them, there are some patches to
avoid lock contention as well as a couple of deadlock conditions.
Enhancements:
- support usrquota, grpquota, and statx
- manage DATA/NODE typed bios separately to serialize more IOs
- modify f2fs_lock_op/wio_mutex to avoid lock contention
- prevent lock contention in migratepage
Bug fixes:
- fix missing load of written inode flag
- fix worst case victim selection in GC
- freezeable GC and discard threads for Android battery life
- sanitize f2fs metadata to deal with security hole
- clean up sysfs-related code and docs"
* tag 'for-f2fs-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (59 commits)
f2fs: support plain user/group quota
f2fs: avoid deadlock caused by lock order of page and lock_op
f2fs: use spin_{,un}lock_irq{save,restore}
f2fs: relax migratepage for atomic written page
f2fs: don't count inode block in in-memory inode.i_blocks
Revert "f2fs: fix to clean previous mount option when remount_fs"
f2fs: do not set LOST_PINO for renamed dir
f2fs: do not set LOST_PINO for newly created dir
f2fs: skip ->writepages for {mete,node}_inode during recovery
f2fs: introduce __check_sit_bitmap
f2fs: stop gc/discard thread in prior during umount
f2fs: introduce reserved_blocks in sysfs
f2fs: avoid redundant f2fs_flush after remount
f2fs: report # of free inodes more precisely
f2fs: add ioctl to do gc with target block address
f2fs: don't need to check encrypted inode for partial truncation
f2fs: measure inode.i_blocks as generic filesystem
f2fs: set CP_TRIMMED_FLAG correctly
f2fs: require key for truncate(2) of encrypted file
f2fs: move sysfs code from super.c to fs/f2fs/sysfs.c
...
|
|
|
Linus Torvalds
|
088737f44b |
Writeback error handling fixes (pile #2)
-----BEGIN PGP SIGNATURE-----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=3Z93
-----END PGP SIGNATURE-----
Merge tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull Writeback error handling updates from Jeff Layton:
"This pile represents the bulk of the writeback error handling fixes
that I have for this cycle. Some of the earlier patches in this pile
may look trivial but they are prerequisites for later patches in the
series.
The aim of this set is to improve how we track and report writeback
errors to userland. Most applications that care about data integrity
will periodically call fsync/fdatasync/msync to ensure that their
writes have made it to the backing store.
For a very long time, we have tracked writeback errors using two flags
in the address_space: AS_EIO and AS_ENOSPC. Those flags are set when a
writeback error occurs (via mapping_set_error) and are cleared as a
side-effect of filemap_check_errors (as you noted yesterday). This
model really sucks for userland.
Only the first task to call fsync (or msync or fdatasync) will see the
error. Any subsequent task calling fsync on a file will get back 0
(unless another writeback error occurs in the interim). If I have
several tasks writing to a file and calling fsync to ensure that their
writes got stored, then I need to have them coordinate with one
another. That's difficult enough, but in a world of containerized
setups that coordination may even not be possible.
But wait...it gets worse!
The calls to filemap_check_errors can be buried pretty far down in the
call stack, and there are internal callers of filemap_write_and_wait
and the like that also end up clearing those errors. Many of those
callers ignore the error return from that function or return it to
userland at nonsensical times (e.g. truncate() or stat()). If I get
back -EIO on a truncate, there is no reason to think that it was
because some previous writeback failed, and a subsequent fsync() will
(incorrectly) return 0.
This pile aims to do three things:
1) ensure that when a writeback error occurs that that error will be
reported to userland on a subsequent fsync/fdatasync/msync call,
regardless of what internal callers are doing
2) report writeback errors on all file descriptions that were open at
the time that the error occurred. This is a user-visible change,
but I think most applications are written to assume this behavior
anyway. Those that aren't are unlikely to be hurt by it.
3) document what filesystems should do when there is a writeback
error. Today, there is very little consistency between them, and a
lot of cargo-cult copying. We need to make it very clear what
filesystems should do in this situation.
To achieve this, the set adds a new data type (errseq_t) and then
builds new writeback error tracking infrastructure around that. Once
all of that is in place, we change the filesystems to use the new
infrastructure for reporting wb errors to userland.
Note that this is just the initial foray into cleaning up this mess.
There is a lot of work remaining here:
1) convert the rest of the filesystems in a similar fashion. Once the
initial set is in, then I think most other fs' will be fairly
simple to convert. Hopefully most of those can in via individual
filesystem trees.
2) convert internal waiters on writeback to use errseq_t for
detecting errors instead of relying on the AS_* flags. I have some
draft patches for this for ext4, but they are not quite ready for
prime time yet.
This was a discussion topic this year at LSF/MM too. If you're
interested in the gory details, LWN has some good articles about this:
https://lwn.net/Articles/718734/
https://lwn.net/Articles/724307/"
* tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
btrfs: minimal conversion to errseq_t writeback error reporting on fsync
xfs: minimal conversion to errseq_t writeback error reporting
ext4: use errseq_t based error handling for reporting data writeback errors
fs: convert __generic_file_fsync to use errseq_t based reporting
block: convert to errseq_t based writeback error tracking
dax: set errors in mapping when writeback fails
Documentation: flesh out the section in vfs.txt on storing and reporting writeback errors
mm: set both AS_EIO/AS_ENOSPC and errseq_t in mapping_set_error
fs: new infrastructure for writeback error handling and reporting
lib: add errseq_t type and infrastructure for handling it
mm: don't TestClearPageError in __filemap_fdatawait_range
mm: clear AS_EIO/AS_ENOSPC when writeback initiation fails
jbd2: don't clear and reset errors after waiting on writeback
buffer: set errors in mapping at the time that the error occurs
fs: check for writeback errors after syncing out buffers in generic_file_fsync
buffer: use mapping_set_error instead of setting the flag
mm: fix mapping_set_error call in me_pagecache_dirty
|
|
|
Linus Torvalds
|
2074006dac |
The new features of this release:
- Added TRACE_DEFINE_SIZEOF() which allows trace events that use
sizeof() it the TP_printk() to be converted to the actual size such
that trace-cmd and perf can parse them correctly.
- Some rework of the TRACE_DEFINE_ENUM() such that the above
TRACE_DEFINE_SIZEOF() could reuse the same code.
- Recording of tgid (Thread Group ID). This is similar to how
task COMMs are recorded (cached at sched_switch), where it is
in a table and used on output of the trace and trace_pipe files.
- Have ":mod:<module>" be cached when written into set_ftrace_filter.
Then the functions of the module will be traced at module load.
- Some random clean ups and small fixes.
-----BEGIN PGP SIGNATURE-----
iQExBAABCAAbBQJZXjYuFBxyb3N0ZWR0QGdvb2RtaXMub3JnAAoJEMm5BfJq2Y3L
fsgIAKUvhpn2igoYCR9tWqu+DovEmwxCIumbCzmCFQcRKlLttRte94yY5+W9hnV0
JPzd9T9zBDVqq1fI7iIop1SuTwEfKW6lJom0usZ8AFpK+YKm6FHnQ28POlvHzre2
lzO41tpRWiehLQsITZ47eByhsvEfhx86mYT/oM1JSR6Pii1OpjyNYmDMw6BaMNBT
kSCQFgIhzAhVuHjwAnB/S++E/ou7M5bCwCb5CNh7MubKubV5upHpoJcgYGO+WWa6
56H/iEhff4EECTGJVefd8e78MtJPL8EsuM0nAcMPlnl8AaiOpP7XCdlgTwdefLvP
b3o+nP15voSHkARGXC6eM6gH0po=
=rvGB
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"The new features of this release:
- Added TRACE_DEFINE_SIZEOF() which allows trace events that use
sizeof() it the TP_printk() to be converted to the actual size such
that trace-cmd and perf can parse them correctly.
- Some rework of the TRACE_DEFINE_ENUM() such that the above
TRACE_DEFINE_SIZEOF() could reuse the same code.
- Recording of tgid (Thread Group ID). This is similar to how task
COMMs are recorded (cached at sched_switch), where it is in a table
and used on output of the trace and trace_pipe files.
- Have ":mod:<module>" be cached when written into set_ftrace_filter.
Then the functions of the module will be traced at module load.
- Some random clean ups and small fixes"
* tag 'trace-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (26 commits)
ftrace: Test for NULL iter->tr in regex for stack_trace_filter changes
ftrace: Decrement count for dyn_ftrace_total_info for init functions
ftrace: Unlock hash mutex on failed allocation in process_mod_list()
tracing: Add support for display of tgid in trace output
tracing: Add support for recording tgid of tasks
ftrace: Decrement count for dyn_ftrace_total_info file
ftrace: Remove unused function ftrace_arch_read_dyn_info()
sh/ftrace: Remove only user of ftrace_arch_read_dyn_info()
ftrace: Have cached module filters be an active filter
ftrace: Implement cached modules tracing on module load
ftrace: Have the cached module list show in set_ftrace_filter
ftrace: Add :mod: caching infrastructure to trace_array
tracing: Show address when function names are not found
ftrace: Add missing comment for FTRACE_OPS_FL_RCU
tracing: Rename update the enum_map file
tracing: Add TRACE_DEFINE_SIZEOF() macros
tracing: define TRACE_DEFINE_SIZEOF() macro to map sizeof's to their values
tracing: Rename enum_replace to eval_replace
trace: rename enum_map functions
trace: rename trace.c enum functions
...
|
|
|
Linus Torvalds
|
a4c20b9a57 |
Merge branch 'for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Pull percpu updates from Tejun Heo: "These are the percpu changes for the v4.13-rc1 merge window. There are a couple visibility related changes - tracepoints and allocator stats through debugfs, along with __ro_after_init markings and a cosmetic rename in percpu_counter. Please note that the simple O(#elements_in_the_chunk) area allocator used by percpu allocator is again showing scalability issues, primarily with bpf allocating and freeing large number of counters. Dennis is working on the replacement allocator and the percpu allocator will be seeing increased churns in the coming cycles" * 'for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: fix static checker warnings in pcpu_destroy_chunk percpu: fix early calls for spinlock in pcpu_stats percpu: resolve err may not be initialized in pcpu_alloc percpu_counter: Rename __percpu_counter_add to percpu_counter_add_batch percpu: add tracepoint support for percpu memory percpu: expose statistics about percpu memory via debugfs percpu: migrate percpu data structures to internal header percpu: add missing lockdep_assert_held to func pcpu_free_area mark most percpu globals as __ro_after_init |
|
|
Jeff Layton
|
5660e13d2f |
fs: new infrastructure for writeback error handling and reporting
Most filesystems currently use mapping_set_error and filemap_check_errors for setting and reporting/clearing writeback errors at the mapping level. filemap_check_errors is indirectly called from most of the filemap_fdatawait_* functions and from filemap_write_and_wait*. These functions are called from all sorts of contexts to wait on writeback to finish -- e.g. mostly in fsync, but also in truncate calls, getattr, etc. The non-fsync callers are problematic. We should be reporting writeback errors during fsync, but many places spread over the tree clear out errors before they can be properly reported, or report errors at nonsensical times. If I get -EIO on a stat() call, there is no reason for me to assume that it is because some previous writeback failed. The fact that it also clears out the error such that a subsequent fsync returns 0 is a bug, and a nasty one since that's potentially silent data corruption. This patch adds a small bit of new infrastructure for setting and reporting errors during address_space writeback. While the above was my original impetus for adding this, I think it's also the case that current fsync semantics are just problematic for userland. Most applications that call fsync do so to ensure that the data they wrote has hit the backing store. In the case where there are multiple writers to the file at the same time, this is really hard to determine. The first one to call fsync will see any stored error, and the rest get back 0. The processes with open fds may not be associated with one another in any way. They could even be in different containers, so ensuring coordination between all fsync callers is not really an option. One way to remedy this would be to track what file descriptor was used to dirty the file, but that's rather cumbersome and would likely be slow. However, there is a simpler way to improve the semantics here without incurring too much overhead. This set adds an errseq_t to struct address_space, and a corresponding one is added to struct file. Writeback errors are recorded in the mapping's errseq_t, and the one in struct file is used as the "since" value. This changes the semantics of the Linux fsync implementation such that applications can now use it to determine whether there were any writeback errors since fsync(fd) was last called (or since the file was opened in the case of fsync having never been called). Note that those writeback errors may have occurred when writing data that was dirtied via an entirely different fd, but that's the case now with the current mapping_set_error/filemap_check_error infrastructure. This will at least prevent you from getting a false report of success. The new behavior is still consistent with the POSIX spec, and is more reliable for application developers. This patch just adds some basic infrastructure for doing this, and ensures that the f_wb_err "cursor" is properly set when a file is opened. Later patches will change the existing code to use this new infrastructure for reporting errors at fsync time. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> |
|
|
Linus Torvalds
|
8c27cb3566 |
Merge branch 'for-4.13-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"The core updates improve error handling (mostly related to bios), with
the usual incremental work on the GFP_NOFS (mis)use removal,
refactoring or cleanups. Except the two top patches, all have been in
for-next for an extensive amount of time.
User visible changes:
- statx support
- quota override tunable
- improved compression thresholds
- obsoleted mount option alloc_start
Core updates:
- bio-related updates:
- faster bio cloning
- no allocation failures
- preallocated flush bios
- more kvzalloc use, memalloc_nofs protections, GFP_NOFS updates
- prep work for btree_inode removal
- dir-item validation
- qgoup fixes and updates
- cleanups:
- removed unused struct members, unused code, refactoring
- argument refactoring (fs_info/root, caller -> callee sink)
- SEARCH_TREE ioctl docs"
* 'for-4.13-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (115 commits)
btrfs: Remove false alert when fiemap range is smaller than on-disk extent
btrfs: Don't clear SGID when inheriting ACLs
btrfs: fix integer overflow in calc_reclaim_items_nr
btrfs: scrub: fix target device intialization while setting up scrub context
btrfs: qgroup: Fix qgroup reserved space underflow by only freeing reserved ranges
btrfs: qgroup: Introduce extent changeset for qgroup reserve functions
btrfs: qgroup: Fix qgroup reserved space underflow caused by buffered write and quotas being enabled
btrfs: qgroup: Return actually freed bytes for qgroup release or free data
btrfs: qgroup: Cleanup btrfs_qgroup_prepare_account_extents function
btrfs: qgroup: Add quick exit for non-fs extents
Btrfs: rework delayed ref total_bytes_pinned accounting
Btrfs: return old and new total ref mods when adding delayed refs
Btrfs: always account pinned bytes when dropping a tree block ref
Btrfs: update total_bytes_pinned when pinning down extents
Btrfs: make BUG_ON() in add_pinned_bytes() an ASSERT()
Btrfs: make add_pinned_bytes() take an s64 num_bytes instead of u64
btrfs: fix validation of XATTR_ITEM dir items
btrfs: Verify dir_item in iterate_object_props
btrfs: Check name_len before in btrfs_del_root_ref
btrfs: Check name_len before reading btrfs_get_name
...
|
|
|
Linus Torvalds
|
5518b69b76 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
"Reasonably busy this cycle, but perhaps not as busy as in the 4.12
merge window:
1) Several optimizations for UDP processing under high load from
Paolo Abeni.
2) Support pacing internally in TCP when using the sch_fq packet
scheduler for this is not practical. From Eric Dumazet.
3) Support mutliple filter chains per qdisc, from Jiri Pirko.
4) Move to 1ms TCP timestamp clock, from Eric Dumazet.
5) Add batch dequeueing to vhost_net, from Jason Wang.
6) Flesh out more completely SCTP checksum offload support, from
Davide Caratti.
7) More plumbing of extended netlink ACKs, from David Ahern, Pablo
Neira Ayuso, and Matthias Schiffer.
8) Add devlink support to nfp driver, from Simon Horman.
9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa
Prabhu.
10) Add stack depth tracking to BPF verifier and use this information
in the various eBPF JITs. From Alexei Starovoitov.
11) Support XDP on qed device VFs, from Yuval Mintz.
12) Introduce BPF PROG ID for better introspection of installed BPF
programs. From Martin KaFai Lau.
13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann.
14) For loads, allow narrower accesses in bpf verifier checking, from
Yonghong Song.
15) Support MIPS in the BPF selftests and samples infrastructure, the
MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David
Daney.
16) Support kernel based TLS, from Dave Watson and others.
17) Remove completely DST garbage collection, from Wei Wang.
18) Allow installing TCP MD5 rules using prefixes, from Ivan
Delalande.
19) Add XDP support to Intel i40e driver, from Björn Töpel
20) Add support for TC flower offload in nfp driver, from Simon
Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub
Kicinski, and Bert van Leeuwen.
21) IPSEC offloading support in mlx5, from Ilan Tayari.
22) Add HW PTP support to macb driver, from Rafal Ozieblo.
23) Networking refcount_t conversions, From Elena Reshetova.
24) Add sock_ops support to BPF, from Lawrence Brako. This is useful
for tuning the TCP sockopt settings of a group of applications,
currently via CGROUPs"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits)
net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap
dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap
cxgb4: Support for get_ts_info ethtool method
cxgb4: Add PTP Hardware Clock (PHC) support
cxgb4: time stamping interface for PTP
nfp: default to chained metadata prepend format
nfp: remove legacy MAC address lookup
nfp: improve order of interfaces in breakout mode
net: macb: remove extraneous return when MACB_EXT_DESC is defined
bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case
bpf: fix return in load_bpf_file
mpls: fix rtm policy in mpls_getroute
net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t
net, ax25: convert ax25_route.refcount from atomic_t to refcount_t
net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t
net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t
...
|
|
|
Linus Torvalds
|
b39de277b0 |
spi: Updates for v4.13
There's only one big change in this release but it's a very big change,
Geert Uytterhoeven has implemented support for SPI slave mode. This
feature has been on the cards since the subsystem was originally merged
back in the mists of time so it's great that Geert stepped up and
finally implemented it.
- SPI slave support, together with wholesale renaming of SPI
controllers from master to controller which went surprisingly
smoothly. This is already used with Renesas SoCs and support is in
the works for i.MX too.
- New drivers for Meson SPICC and ST STM32
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAllbsdwTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0F1/B/4jzpT5JSSKxoC0upLswKQPqOsmkugF
n/ne5TofpH8YdchFgH1IRa6KhIBXW4aYCHkGnZvsc8hQcGfu1juEmC1YlDTwm2fB
/z7LUG0O7BCRQuvxRy2Sj2m+/hLLBhs1AGu1Ht0yj4rbAewJMEJLAL+DB13Oy2Iv
Tm0TASU0t/1FHXuCBsy4cpOnyrZuvMdnP5WOxfZjL738gk1EmmTgjKKGA9wiRYLF
NedOC1Tlaam27jXGvysLcRkrIf6HKDTYl39UuSBAeFZnPwxbvCYLe8Ft2xPRaynn
WbgqxZdrntv9KIduRnUpiA1EqIVovZ94sNgRpo8eAn1xIcIrYgAO6+wR
=NkAY
-----END PGP SIGNATURE-----
Merge tag 'spi-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"There's only one big change in this release but it's a very big
change: Geert Uytterhoeven has implemented support for SPI slave mode.
This feature has been on the cards since the subsystem was originally
merged back in the mists of time so it's great that Geert stepped up
and finally implemented it.
- SPI slave support, together with wholesale renaming of SPI
controllers from master to controller which went surprisingly
smoothly. This is already used with Renesas SoCs and support is in
the works for i.MX too.
- New drivers for Meson SPICC and ST STM32"
* tag 'spi-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (57 commits)
spi: loopback-test: Fix kfree() NULL pointer error.
spi: loopback-test: fix spelling mistake: "reruning" -> "rerunning"
spi: sirf: fix spelling mistake: "registerred" -> "registered"
spi: stm32: fix potential dereference null return value
spi: stm32: enhance DMA error management
spi: stm32: add runtime PM support
spi: stm32: use normal conditional statements instead of ternary operator
spi: stm32: replace st, spi-midi with st, spi-midi-ns to fit bindings
spi: stm32: fix example with st, spi-midi-ns property
spi: stm32: fix compatible to fit with new bindings
spi: stm32: use SoC specific compatible
spi: rockchip: Disable Runtime PM when chip select is asserted
spi: rockchip: Set GPIO_SS flag to enable Slave Select with GPIO CS
spi: atmel: fix corrupted data issue on SAM9 family SoCs
spi: stm32: fix error check on mbr being -ve
spi: add driver for STM32 SPI controller
spi: Document the STM32 SPI bindings
spi/bcm63xx: Fix checkpatch warnings
spi: imx: Check for allocation failure earlier
spi: mediatek: add spi support for mt2712 IC
...
|
|
|
Linus Torvalds
|
f4dd029ee0 |
Char/Misc patches for 4.13-rc1
Here is the "big" char/misc driver patchset for 4.13-rc1. Lots of stuff in here, a large thunderbolt update, w1 driver header reorg, the new mux driver subsystem, google firmware driver updates, and a raft of other smaller things. Full details in the shortlog. All of these have been in linux-next for a while with the only reported issue being a merge problem with this tree and the jc-docs tree in the w1 documentation area. The fix should be obvious for what to do when it happens, if not, we can send a follow-up patch for it afterward. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWVpXKA8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynLrQCdG9SxRjAbOd6pT9Fr2NAzpUG84YsAoLw+I3iO EMi60UXWqAFJbtVMS9Aj =yrSq -----END PGP SIGNATURE----- Merge tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the "big" char/misc driver patchset for 4.13-rc1. Lots of stuff in here, a large thunderbolt update, w1 driver header reorg, the new mux driver subsystem, google firmware driver updates, and a raft of other smaller things. Full details in the shortlog. All of these have been in linux-next for a while with the only reported issue being a merge problem with this tree and the jc-docs tree in the w1 documentation area" * tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (147 commits) misc: apds990x: Use sysfs_match_string() helper mei: drop unreachable code in mei_start mei: validate the message header only in first fragment. DocBook: w1: Update W1 file locations and names in DocBook mux: adg792a: always require I2C support nvmem: rockchip-efuse: add support for rk322x-efuse nvmem: core: add locking to nvmem_find_cell nvmem: core: Call put_device() in nvmem_unregister() nvmem: core: fix leaks on registration errors nvmem: correct Broadcom OTP controller driver writes w1: Add subsystem kernel public interface drivers/fsi: Add module license to core driver drivers/fsi: Use asynchronous slave mode drivers/fsi: Add hub master support drivers/fsi: Add SCOM FSI client device driver drivers/fsi/gpio: Add tracepoints for GPIO master drivers/fsi: Add GPIO based FSI master drivers/fsi: Document FSI master sysfs files in ABI drivers/fsi: Add error handling for slave drivers/fsi: Add tracepoints for low-level operations ... |
|
|
Dennis Zhou
|
df95e795a7 |
percpu: add tracepoint support for percpu memory
Add support for tracepoints to the following events: chunk allocation, chunk free, area allocation, area free, and area allocation failure. This should let us replay percpu memory requests and evaluate corresponding decisions. Signed-off-by: Dennis Zhou <dennisz@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org> |
|
|
Anand Jain
|
62b163f077 |
btrfs: cleanup unused qgroup trace event
Commit
|
|
|
Jeremy Linton
|
ff910cfdc6 |
tracing: Add TRACE_DEFINE_SIZEOF() macros
There are a few places in the kernel where sizeof() is already being used. Update those locations with TRACE_DEFINE_SIZEOF. Link: http://lkml.kernel.org/r/20170531215653.3240-12-jeremy.linton@arm.com Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
|
|
Jeremy Linton
|
4f0dfd76e9 |
tracing: define TRACE_DEFINE_SIZEOF() macro to map sizeof's to their values
Perf has a problem that if sizeof() macros are used within TRACE_EVENT() macro's they end up in userspace as "sizeof(kernel structure)" which cannot properly be parsed. Add a macro which can forward this data through the eval_map for userspace utilization. Link: http://lkml.kernel.org/r/20170531215653.3240-10-jeremy.linton@arm.com Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
|
|
Jeremy Linton
|
00f4b652b6 |
trace: rename trace_enum_map to trace_eval_map
Each enum is loaded into the trace_enum_map, as we are now using this for more than enums rename it. Link: http://lkml.kernel.org/r/20170531215653.3240-3-jeremy.linton@arm.com Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
|
|
Jeremy Linton
|
02fd7f68f5 |
trace: rename kernel enum section to eval
The kernel and its modules have sections containing the enum string to value conversions. Rename this section because we intend to store more than enums in it. Link: http://lkml.kernel.org/r/20170531215653.3240-2-jeremy.linton@arm.com Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
|
|
Geert Uytterhoeven
|
8caab75fd2 |
spi: Generalize SPI "master" to "controller"
Now struct spi_master is used for both SPI master and slave controllers,
it makes sense to rename it to struct spi_controller, and replace
"master" by "controller" where appropriate.
For now this conversion is done for SPI core infrastructure only.
Wrappers are provided for backwards compatibility, until all SPI drivers
have been converted.
Noteworthy details:
- SPI_MASTER_GPIO_SS is retained, as it only makes sense for SPI
master controllers,
- spi_busnum_to_master() is retained, as it looks up masters only,
- A new field spi_device.controller is added, but spi_device.master is
retained for compatibility (both are always initialized by
spi_alloc_device()),
- spi_flash_read() is used by SPI masters only.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
Jeremy Kerr
|
1247cf7ab8 |
drivers/fsi/gpio: Add tracepoints for GPIO master
Trace low level input/output GPIO operations. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Jeremy Kerr
|
66433b05a3 |
drivers/fsi: Add tracepoints for low-level operations
Trace low level read and write FSI bus operations. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Paul E. McKenney
|
f92c734f02 |
rcu: Prevent rcu_barrier() from starting needless grace periods
Currently rcu_barrier() uses call_rcu() to enqueue new callbacks on each CPU with a non-empty callback list. This works, but means that rcu_barrier() forces grace periods that are not otherwise needed. The key point is that rcu_barrier() never needs to wait for a grace period, but instead only for all pre-existing callbacks to be invoked. This means that rcu_barrier()'s new callbacks should be placed in the callback-list segment containing the last pre-existing callback. This commit makes this change using the new rcu_segcblist_entrain() function. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> |
|
|
David Howells
|
4e255721d1 |
rxrpc: Add service upgrade support for client connections
Make it possible for a client to use AuriStor's service upgrade facility.
The client does this by adding an RXRPC_UPGRADE_SERVICE control message to
the first sendmsg() of a call. This takes no parameters.
When recvmsg() starts returning data from the call, the service ID field in
the returned msg_name will reflect the result of the upgrade attempt. If
the upgrade was ignored, srx_service will match what was set in the
sendmsg(); if the upgrade happened the srx_service will be altered to
indicate the service the server upgraded to.
Note that:
(1) The choice of upgrade service is up to the server
(2) Further client calls to the same server that would share a connection
are blocked if an upgrade probe is in progress.
(3) This should only be used to probe the service. Clients should then
use the returned service ID in all subsequent communications with that
server (and not set the upgrade). Note that the kernel will not
retain this information should the connection expire from its cache.
(4) If a server that supports upgrading is replaced by one that doesn't,
whilst a connection is live, and if the replacement is running, say,
OpenAFS 1.6.4 or older or an older IBM AFS, then the replacement
server will not respond to packets sent to the upgraded connection.
At this point, calls will time out and the server must be reprobed.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
|
Wolfram Sang
|
22c78d1cce |
i2c: break out smbus support into separate file
Break out the exported SMBus functions and the emulation layer into a separate file. This also involved splitting up the tracing header into an I2C and an SMBus part. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> |
|
|
Jaegeuk Kim
|
a912b54d3a |
f2fs: split bio cache
Split DATA/NODE type bio cache according to different temperature, so write IOs with the same temperature can be merged in corresponding bio cache as much as possible, otherwise, different temperature write IOs submitting into one bio cache will always cause split of bio. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
|
|
Jaegeuk Kim
|
b9109b0e49 |
f2fs: remove unnecessary read cases in merged IO flow
Merged IO flow doesn't need to care about read IOs. f2fs_submit_merged_bio -> f2fs_submit_merged_write f2fs_submit_merged_bios -> f2fs_submit_merged_writes f2fs_submit_merged_bio_cond -> f2fs_submit_merged_write_cond Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
|
|
Linus Torvalds
|
6a776e47a0 |
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management updates from Zhang Rui: - Fix a problem where orderly_shutdown() is called for multiple times due to multiple critical overheating events raised in a short period by platform thermal driver. (Keerthy) - Introduce a backup thermal shutdown mechanism, which invokes kernel_power_off()/emergency_restart() directly, after orderly_shutdown() being issued for certain amount of time(specified via Kconfig). This is useful in certain conditions that userspace may be unable to power off the system in a clean manner and leaves the system in a critical state, like in the middle of driver probing phase. (Keerthy) - Introduce a new interface in thermal devfreq_cooling code so that the driver can provide more precise data regarding actual power to the thermal governor every time the power budget is calculated. (Lukasz Luba) - Introduce BCM 2835 soc thermal driver and northstar thermal driver, within a new sub-folder. (Rafał Miłecki) - Introduce DA9062/61 thermal driver. (Steve Twiss) - Remove non-DT booting on TI-SoC driver. Also add support to fetching coefficients from DT. (Keerthy) - Refactorf RCAR Gen3 thermal driver. (Niklas Söderlund) - Small fix on MTK and intel-soc-dts thermal driver. (Dawei Chien, Brian Bian) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (25 commits) thermal: core: Add a back up thermal shutdown mechanism thermal: core: Allow orderly_poweroff to be called only once Thermal: Intel SoC DTS: Change interrupt request behavior trace: thermal: add another parameter 'power' to the tracing function thermal: devfreq_cooling: add new interface for direct power read thermal: devfreq_cooling: refactor code and add get_voltage function thermal: mt8173: minor mtk_thermal.c cleanups thermal: bcm2835: move to the broadcom subdirectory thermal: broadcom: ns: specify myself as MODULE_AUTHOR thermal: da9062/61: Thermal junction temperature monitoring driver Documentation: devicetree: thermal: da9062/61 TJUNC temperature binding thermal: broadcom: add Northstar thermal driver dt-bindings: thermal: add support for Broadcom's Northstar thermal thermal: bcm2835: add thermal driver for bcm2835 SoC dt-bindings: Add thermal zone to bcm2835-thermal example thermal: rcar_gen3_thermal: add suspend and resume support thermal: rcar_gen3_thermal: store device match data in private structure thermal: rcar_gen3_thermal: enable hardware interrupts for trip points thermal: rcar_gen3_thermal: record and check number of TSCs found thermal: rcar_gen3_thermal: check that TSC exists before memory allocation ... |
|
|
Linus Torvalds
|
1176032cb1 |
Merge branch 'for-linus-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs updates from Chris Mason: "This has fixes and cleanups Dave Sterba collected for the merge window. The biggest functional fixes are between btrfs raid5/6 and scrub, and raid5/6 and device replacement. Some of our pending qgroup fixes are included as well while I bash on the rest in testing. We also have the usual set of cleanups, including one that makes __btrfs_map_block() much more maintainable, and conversions from atomic_t to refcount_t" * 'for-linus-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (71 commits) btrfs: fix the gfp_mask for the reada_zones radix tree Btrfs: fix reported number of inode blocks Btrfs: send, fix file hole not being preserved due to inline extent Btrfs: fix extent map leak during fallocate error path Btrfs: fix incorrect space accounting after failure to insert inline extent Btrfs: fix invalid attempt to free reserved space on failure to cow range btrfs: Handle delalloc error correctly to avoid ordered extent hang btrfs: Fix metadata underflow caused by btrfs_reloc_clone_csum error btrfs: check if the device is flush capable btrfs: delete unused member nobarriers btrfs: scrub: Fix RAID56 recovery race condition btrfs: scrub: Introduce full stripe lock for RAID56 btrfs: Use ktime_get_real_ts for root ctime Btrfs: handle only applicable errors returned by btrfs_get_extent btrfs: qgroup: Fix qgroup corruption caused by inode_cache mount option btrfs: use q which is already obtained from bdev_get_queue Btrfs: switch to div64_u64 if with a u64 divisor Btrfs: update scrub_parity to use u64 stripe_len Btrfs: enable repair during read for raid56 profile btrfs: use clear_page where appropriate ... |
|
|
Linus Torvalds
|
28b47809b2 |
IOMMU Updates for Linux v4.12
This includes: * Some code optimizations for the Intel VT-d driver * Code to switch off a previously enabled Intel IOMMU * Support for 'struct iommu_device' for OMAP, Rockchip and Mediatek IOMMUs * Some header optimizations for IOMMU core code headers and a few fixes that became necessary in other parts of the kernel because of that * ACPI/IORT updates and fixes * Some Exynos IOMMU optimizations * Code updates for the IOMMU dma-api code to bring it closer to use per-cpu iova caches * New command-line option to set default domain type allocated by the iommu core code * Another command line option to allow the Intel IOMMU switched off in a tboot environment * ARM/SMMU: TLB sync optimisations for SMMUv2, Support for using an IDENTITY domain in conjunction with DMA ops, Support for SMR masking, Support for 16-bit ASIDs (was previously broken) * Various other small fixes and improvements -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABAgAGBQJZEY4XAAoJECvwRC2XARrjth0QAKV56zjnFclv39aDo6eCq9CT 51+XT4bPY5VKQ2+Jx76TBNObHmGK+8KEMHfT9khpWJtFCDyy25SGckLry1nYqmZs tSTsbj4sOeCyKzOLITlRN9/OzKXkjKAxYuq+sQZZFDFYf3kCM/eag0dGAU6aVLNp tkIal3CSpGjCQ9M5JohrtQ1mwiGqCIkMIgvnBjRw+bfpLnQNG+VL6VU2G3RAkV2b 5Vbdoy+P7ZQnJSZr/bibYL2BaQs2diR4gOppT5YbsfniMq4QYSjheu1xBboGX8b7 sx8yuPi4370irSan0BDvlvdQdjBKIRiDjfGEKDhRwPhtvN6JREGakhEOC8MySQ37 mP96B72Lmd+a7DEl5udOL7tQILA0DcUCX0aOyF714khnZuFU5tVlCotb/36xeJ+T FPc3RbEVQ90m8dYU6MNJ+ahtb/ZapxGTRfisIigB6wlnZa0Evabp9EJSce6oJMkm whbBhDubeEU18n9XAaofMbu+P2LAzq8cxiRMlsDvT4mIy7jO86jjCmhpu1Tfn2GY 4wrEQZdWOMvhUsIhObXA0aC3BzC506uvnKPW3qy041RaxBuelWiBi29qzYbhxzkr DLDpWbUZNYPyFJjttpavyQb2/XRduBTJdVP1pQpkJNDsW5jLiBkpSqm9xNADapRY vLSYRX0JCIquaD+PAuxn =3aE8 -----END PGP SIGNATURE----- Merge tag 'iommu-updates-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - code optimizations for the Intel VT-d driver - ability to switch off a previously enabled Intel IOMMU - support for 'struct iommu_device' for OMAP, Rockchip and Mediatek IOMMUs - header optimizations for IOMMU core code headers and a few fixes that became necessary in other parts of the kernel because of that - ACPI/IORT updates and fixes - Exynos IOMMU optimizations - updates for the IOMMU dma-api code to bring it closer to use per-cpu iova caches - new command-line option to set default domain type allocated by the iommu core code - another command line option to allow the Intel IOMMU switched off in a tboot environment - ARM/SMMU: TLB sync optimisations for SMMUv2, Support for using an IDENTITY domain in conjunction with DMA ops, Support for SMR masking, Support for 16-bit ASIDs (was previously broken) - various other small fixes and improvements * tag 'iommu-updates-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (63 commits) soc/qbman: Move dma-mapping.h include to qman_priv.h soc/qbman: Fix implicit header dependency now causing build fails iommu: Remove trace-events include from iommu.h iommu: Remove pci.h include from trace/events/iommu.h arm: dma-mapping: Don't override dma_ops in arch_setup_dma_ops() ACPI/IORT: Fix CONFIG_IOMMU_API dependency iommu/vt-d: Don't print the failure message when booting non-kdump kernel iommu: Move report_iommu_fault() to iommu.c iommu: Include device.h in iommu.h x86, iommu/vt-d: Add an option to disable Intel IOMMU force on iommu/arm-smmu: Return IOVA in iova_to_phys when SMMU is bypassed iommu/arm-smmu: Correct sid to mask iommu/amd: Fix incorrect error handling in amd_iommu_bind_pasid() iommu: Make iommu_bus_notifier return NOTIFY_DONE rather than error code omap3isp: Remove iommu_group related code iommu/omap: Add iommu-group support iommu/omap: Make use of 'struct iommu_device' iommu/omap: Store iommu_dev pointer in arch_data iommu/omap: Move data structures to omap-iommu.h iommu/omap: Drop legacy-style device support ... |
|
|
Linus Torvalds
|
bf5f89463f |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:
- the rest of MM
- various misc things
- procfs updates
- lib/ updates
- checkpatch updates
- kdump/kexec updates
- add kvmalloc helpers, use them
- time helper updates for Y2038 issues. We're almost ready to remove
current_fs_time() but that awaits a btrfs merge.
- add tracepoints to DAX
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (114 commits)
drivers/staging/ccree/ssi_hash.c: fix build with gcc-4.4.4
selftests/vm: add a test for virtual address range mapping
dax: add tracepoint to dax_insert_mapping()
dax: add tracepoint to dax_writeback_one()
dax: add tracepoints to dax_writeback_mapping_range()
dax: add tracepoints to dax_load_hole()
dax: add tracepoints to dax_pfn_mkwrite()
dax: add tracepoints to dax_iomap_pte_fault()
mtd: nand: nandsim: convert to memalloc_noreclaim_*()
treewide: convert PF_MEMALLOC manipulations to new helpers
mm: introduce memalloc_noreclaim_{save,restore}
mm: prevent potential recursive reclaim due to clearing PF_MEMALLOC
mm/huge_memory.c: deposit a pgtable for DAX PMD faults when required
mm/huge_memory.c: use zap_deposited_table() more
time: delete CURRENT_TIME_SEC and CURRENT_TIME
gfs2: replace CURRENT_TIME with current_time
apparmorfs: replace CURRENT_TIME with current_time()
lustre: replace CURRENT_TIME macro
fs: ubifs: replace CURRENT_TIME_SEC with current_time
fs: ufs: use ktime_get_real_ts64() for birthtime
...
|
|
|
Ross Zwisler
|
b444073458 |
dax: add tracepoint to dax_insert_mapping()
Add a tracepoint to dax_insert_mapping(), following the same logging conventions as the rest of DAX. This tracepoint, along with the one in dax_load_hole(), lets us know how a DAX PTE fault was serviced. Here is an example DAX fault that inserts a PTE mapping: small-1126 [007] .... 145.451604: dax_pte_fault: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10420000 pgoff 0x220 small-1126 [007] .... 145.452317: dax_insert_mapping: dev 259:0 ino 0x1003 shared write address 0x10420000 radix_entry 0x100006 small-1126 [007] .... 145.452399: dax_pte_fault_done: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10420000 pgoff 0x220 MAJOR|NOPAGE Link: http://lkml.kernel.org/r/20170221195116.13278-7-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Ross Zwisler
|
f9bc3a0753 |
dax: add tracepoint to dax_writeback_one()
Add a tracepoint to dax_writeback_one(), following the same logging conventions as the rest of DAX. Here is an example range writeback which ends up flushing one PMD and one PTE: test-1265 [003] .... 496.615250: dax_writeback_range: dev 259:0 ino 0x1003 pgoff 0x0-0x7ffffffffffff test-1265 [003] .... 496.616263: dax_writeback_one: dev 259:0 ino 0x1003 pgoff 0x0 pglen 0x200 test-1265 [003] .... 496.616270: dax_writeback_one: dev 259:0 ino 0x1003 pgoff 0x305 pglen 0x1 test-1265 [003] .... 496.616272: dax_writeback_range_done: dev 259:0 ino 0x1003 pgoff 0x0-0x7ffffffffffff [akpm@linux-foundation.org: struct blk_dax_ctl has disappeared] Link: http://lkml.kernel.org/r/20170221195116.13278-6-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Ross Zwisler
|
d14a3f48a1 |
dax: add tracepoints to dax_writeback_mapping_range()
Add tracepoints to dax_writeback_mapping_range(), following the same logging conventions as the rest of DAX. Here is an example writeback call: msync-1085 [006] .... 200.902565: dax_writeback_range: dev 259:0 ino 0x1003 pgoff 0x200-0x2ff msync-1085 [006] .... 200.902579: dax_writeback_range_done: dev 259:0 ino 0x1003 pgoff 0x200-0x2ff [ross.zwisler@linux.intel.com: fix regression in dax_writeback_mapping_range()] Link: http://lkml.kernel.org/r/20170314215358.31451-1-ross.zwisler@linux.intel.com Link: http://lkml.kernel.org/r/20170221195116.13278-5-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Ross Zwisler
|
678c9fd043 |
dax: add tracepoints to dax_load_hole()
Add tracepoints to dax_load_hole(), following the same logging conventions
as the rest of DAX.
Here is the logging generated by a PTE read from a hole:
read-1075 [002] ....
62.362108: dax_pte_fault: dev 259:0 ino 0x1003 shared ALLOW_RETRY|KILLABLE|USER address 0x10480000 pgoff 0x280
read-1075 [002] ....
62.362140: dax_load_hole: dev 259:0 ino 0x1003 shared ALLOW_RETRY|KILLABLE|USER address 0x10480000 pgoff 0x280 NOPAGE
read-1075 [002] ....
62.362141: dax_pte_fault_done: dev 259:0 ino 0x1003 shared ALLOW_RETRY|KILLABLE|USER address 0x10480000 pgoff 0x280 NOPAGE
Link: http://lkml.kernel.org/r/20170221195116.13278-4-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Ross Zwisler
|
c3ff68d7d1 |
dax: add tracepoints to dax_pfn_mkwrite()
Add tracepoints to dax_pfn_mkwrite(), following the same logging conventions as the rest of DAX. Here is an example PTE fault followed by a pfn_mkwrite: small_aligned-1094 [002] .... 374.084998: dax_pte_fault: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10400000 pgoff 0x200 small_aligned-1094 [002] .... 374.085145: dax_pte_fault_done: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10400000 pgoff 0x200 MAJOR|NOPAGE small_aligned-1094 [002] .... 374.085165: dax_pfn_mkwrite: dev 259:0 ino 0x1003 shared WRITE|MKWRITE|ALLOW_RETRY|KILLABLE|USER address 0x10400000 pgoff 0x200 NOPAGE Link: http://lkml.kernel.org/r/20170221195116.13278-3-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Ross Zwisler
|
a9c42b33ed |
dax: add tracepoints to dax_iomap_pte_fault()
Patch series "second round of tracepoints for DAX".
This second round of DAX tracepoint patches adds tracing to the PTE
fault path (dax_iomap_pte_fault(), dax_pfn_mkwrite(), dax_load_hole(),
dax_insert_mapping()) and to the writeback path
(dax_writeback_mapping_range(), dax_writeback_one()).
The purpose of this tracing is to give us a high level view of what DAX
is doing, whether faults are being serviced by PMDs or PTEs, and by real
storage or by zero pages covering holes.
I do have some patches nearly ready which also add tracing to
grab_mapping_entry() and dax_insert_mapping_entry(). These are more
targeted at logging how we are interacting with the radix tree, how we
use empty entries for locking, whether we "downgrade" huge zero pages to
4k PTE sized allocations, etc. In the end it seemed to me that this
might be too detailed to have as constantly present tracepoints, but if
anyone sees value in having tracepoints like this in the DAX code
permanently (Jan?), please let me know and I'll add those last two
patches.
All these tracepoints were done to be consistent with the style of the
XFS tracepoints and with the existing DAX PMD tracepoints.
This patch (of 6):
Add tracepoints to dax_iomap_pte_fault(), following the same logging
conventions as the rest of DAX.
Here is an example fault that initially tries to be serviced by the PMD
fault handler but which falls back to PTEs because the VMA isn't large
enough to hold a PMD:
small-1086 [005] ....
71.140014: xfs_filemap_huge_fault: dev 259:0 ino 0x1003
small-1086 [005] ....
71.140027: dax_pmd_fault: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10420000 vm_start 0x10200000 vm_end 0x10500000 pgoff 0x220 max_pgoff 0x1400
small-1086 [005] ....
71.140028: dax_pmd_fault_done: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10420000 vm_start 0x10200000 vm_end 0x10500000 pgoff 0x220 max_pgoff 0x1400 FALLBACK
small-1086 [005] ....
71.140035: dax_pte_fault: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10420000 pgoff 0x220
small-1086 [005] ....
71.140396: dax_pte_fault_done: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10420000 pgoff 0x220 MAJOR|NOPAGE
Link: http://lkml.kernel.org/r/20170221195116.13278-2-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Linus Torvalds
|
70ef8f0d37 |
for-f2fs-4.12
In this round, we've focused on enhancing performance with regards to block
allocation, GC, and discard/in-place-update IO controls. There are a bunch
of clean-ups as well as minor bug fixes.
= Enhancement
- disable heap-based allocation by default
- issue small-sized discard commands by default
- change the policy of data hotness for logging
- distinguish IOs in terms of size and wbc type
- start SSR earlier to avoid foreground GC
- enhance data structures managing discard commands
- enhance in-place update flow
- add some more fault injection routines
- secure one more xattr entry
= Bug fix
- calculate victim cost for GC correctly
- remain correct victim segment number for GC
- race condition in nid allocator and initializer
- stale pointer produced by atomic_writes
- fix missing REQ_SYNC for flush commands
- handle missing errors in more corner cases
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=SBUb
-----END PGP SIGNATURE-----
Merge tag 'for-f2fs-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've focused on enhancing performance with regards to
block allocation, GC, and discard/in-place-update IO controls. There
are a bunch of clean-ups as well as minor bug fixes.
Enhancements:
- disable heap-based allocation by default
- issue small-sized discard commands by default
- change the policy of data hotness for logging
- distinguish IOs in terms of size and wbc type
- start SSR earlier to avoid foreground GC
- enhance data structures managing discard commands
- enhance in-place update flow
- add some more fault injection routines
- secure one more xattr entry
Bug fixes:
- calculate victim cost for GC correctly
- remain correct victim segment number for GC
- race condition in nid allocator and initializer
- stale pointer produced by atomic_writes
- fix missing REQ_SYNC for flush commands
- handle missing errors in more corner cases"
* tag 'for-f2fs-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (111 commits)
f2fs: fix a mount fail for wrong next_scan_nid
f2fs: enhance scalability of trace macro
f2fs: relocate inode_{,un}lock in F2FS_IOC_SETFLAGS
f2fs: Make flush bios explicitely sync
f2fs: show available_nids in f2fs/status
f2fs: flush dirty nats periodically
f2fs: introduce CP_TRIMMED_FLAG to avoid unneeded discard
f2fs: allow cpc->reason to indicate more than one reason
f2fs: release cp and dnode lock before IPU
f2fs: shrink size of struct discard_cmd
f2fs: don't hold cmd_lock during waiting discard command
f2fs: nullify fio->encrypted_page for each writes
f2fs: sanity check segment count
f2fs: introduce valid_ipu_blkaddr to clean up
f2fs: lookup extent cache first under IPU scenario
f2fs: reconstruct code to write a data page
f2fs: introduce __wait_discard_cmd
f2fs: introduce __issue_discard_cmd
f2fs: enable small discard by default
f2fs: delay awaking discard thread
...
|
|
|
Linus Torvalds
|
dd727dad37 |
Add GETFSMAP support; some performance improvements for very large
file systems and for random write workloads into a preallocated file; bug fixes and cleanups. -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlkPYB8ACgkQ8vlZVpUN gaP1HwgApoMQGegtRIbCZKUzKBJ2S6vwIoPAMz62JuwngOyWygJ1T1TliKTitG04 XvijKpUHtEggMO/ZsUOCoyr2LzJlpVvvrJZsavEubO12LKreYMpvNraZF1GACYTb lIZpdWkpcEz5WnPV/PXW/dEMcSMhnKe8tbmHXMyAouSC6a55F5Wp456KF/plqkHU zkWTCDbEOtHThzpL8cthUL71ji62I3Op5jn/qOfKCm6/JtUlw5pYjWkRUNqqjSQE uQqMpqLxI/VjOdEiBPxEF6A+ZudZmoBQKY15ibWCcHUPFOPqk4RdYz6VivRI7zrg KrrKcdFT29MtKnRfAAoJcc0nJ4e1Iw== =il74 -----END PGP SIGNATURE----- Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: - add GETFSMAP support - some performance improvements for very large file systems and for random write workloads into a preallocated file - bug fixes and cleanups. * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: jbd2: cleanup write flags handling from jbd2_write_superblock() ext4: mark superblock writes synchronous for nobarrier mounts ext4: inherit encryption xattr before other xattrs ext4: replace BUG_ON with WARN_ONCE in ext4_end_bio() ext4: avoid unnecessary transaction stalls during writeback ext4: preload block group descriptors ext4: make ext4_shutdown() static ext4: support GETFSMAP ioctls vfs: add common GETFSMAP ioctl definitions ext4: evict inline data when writing to memory map ext4: remove ext4_xattr_check_entry() ext4: rename ext4_xattr_check_names() to ext4_xattr_check_entries() ext4: merge ext4_xattr_list() into ext4_listxattr() ext4: constify static data that is never modified ext4: trim return value and 'dir' argument from ext4_insert_dentry() jbd2: fix dbench4 performance regression for 'nobarrier' mounts jbd2: Fix lockdep splat with generic/270 test mm: retry writepages() on ENOMEM when doing an data integrity writeback |
|
|
Linus Torvalds
|
e87d51ac61 |
media updates for v4.12-rc1
-----BEGIN PGP SIGNATURE-----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=Snzj
-----END PGP SIGNATURE-----
Merge tag 'media/v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
"Media updates for v4.12-rc1:
- new driver to support mediatek jpeg in hardware codec
- rc-lirc, s5p-cec and st-cec staging drivers got promoted
- hardware histogram support for vsp1 driver
- added Virtual Media Controller driver, to make easier to test the
media controller
- added a new CEC driver (rainshadow-cec)
- removed two staging LIRC drivers for obscure hardware that are too
obsolete
- added support for Intel SR300 Depth camera
- some improvements at CEC and RC core
- lots of driver cleanups, improvements all over the tree
With this series, we're finally getting rid of the LIRC staging
driver. There's just one left (lirc_zilog), with require more care,
as part of its functionality (IR RX) is already provided by another
driver. Work in progress to convert it on the proper way"
* tag 'media/v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (304 commits)
[media] ov2640: print error if devm_*_optional*() fails
[media] atmel-isc: Fix the static checker warning
[media] ov2640: add support for MEDIA_BUS_FMT_YVYU8_2X8 and MEDIA_BUS_FMT_VYUY8_2X8
[media] ov2640: fix vflip control
[media] ov2640: fix duplicate width+height returning from ov2640_select_win()
[media] ov2640: add missing write to size change preamble
[media] ov2640: add information about DSP register 0xc7
[media] ov2640: improve banding filter register definitions/documentation
[media] ov2640: fix init sequence alignment
[media] ov2640: make GPIOLIB an optional dependency
[media] xc5000: fix spelling mistake: "calibration"
[media] vidioc-queryctrl.rst: fix menu/int menu references
[media] media-entity: only call dev_dbg_obj if mdev is not NULL
[media] pixfmt-meta-vsp1-hgo.rst: remove spurious '-'
[media] mtk-vcodec: avoid warnings because of empty macros
[media] coda: bump maximum number of internal framebuffers to 17
[media] media: mtk-vcodec: remove informative log
[media] subdev-formats.rst: remove spurious '-'
[media] dw2102: limit messages to buffer size
[media] ttusb2: limit messages to buffer size
...
|
|
|
Lukasz Luba
|
771ffa14ea |
trace: thermal: add another parameter 'power' to the tracing function
This patch adds another parameter to the trace function: trace_thermal_power_devfreq_get_power(). In case when we call directly driver's code for the real power, we do not have static/dynamic_power values. Instead we get total power in the '*power' value. The 'static_power' and 'dynamic_power' are set to 0. Therefore, we have to trace that '*power' value in this scenario. CC: Steven Rostedt <rostedt@goodmis.org> CC: Ingo Molnar <mingo@redhat.com> CC: Zhang Rui <rui.zhang@intel.com> CC: Eduardo Valentin <edubezval@gmail.com> Acked-by: Javi Merino <javi.merino@kernel.org> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> |
|
|
Chao Yu
|
baaabbb72b |
f2fs: enhance scalability of trace macro
Use __print_flags in show_bio_op_flags and show_cpreason instead of __print_symbolic, it enables tracer function traverses and shows all bits in the flag. Additionally, add missing REQ_FUA into F2FS_OP_FLAGS. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
|
|
Chao Yu
|
1f43e2ad7b |
f2fs: introduce CP_TRIMMED_FLAG to avoid unneeded discard
Introduce CP_TRIMMED_FLAG to indicate all invalid block were trimmed before umount, so once we do mount with image which contain the flag, we don't record invalid blocks as undiscard one, when fstrim is being triggered, we can avoid issuing redundant discard commands. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
|
|
Linus Torvalds
|
8d65b08deb |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Millar:
"Here are some highlights from the 2065 networking commits that
happened this development cycle:
1) XDP support for IXGBE (John Fastabend) and thunderx (Sunil Kowuri)
2) Add a generic XDP driver, so that anyone can test XDP even if they
lack a networking device whose driver has explicit XDP support
(me).
3) Sparc64 now has an eBPF JIT too (me)
4) Add a BPF program testing framework via BPF_PROG_TEST_RUN (Alexei
Starovoitov)
5) Make netfitler network namespace teardown less expensive (Florian
Westphal)
6) Add symmetric hashing support to nft_hash (Laura Garcia Liebana)
7) Implement NAPI and GRO in netvsc driver (Stephen Hemminger)
8) Support TC flower offload statistics in mlxsw (Arkadi Sharshevsky)
9) Multiqueue support in stmmac driver (Joao Pinto)
10) Remove TCP timewait recycling, it never really could possibly work
well in the real world and timestamp randomization really zaps any
hint of usability this feature had (Soheil Hassas Yeganeh)
11) Support level3 vs level4 ECMP route hashing in ipv4 (Nikolay
Aleksandrov)
12) Add socket busy poll support to epoll (Sridhar Samudrala)
13) Netlink extended ACK support (Johannes Berg, Pablo Neira Ayuso,
and several others)
14) IPSEC hw offload infrastructure (Steffen Klassert)"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2065 commits)
tipc: refactor function tipc_sk_recv_stream()
tipc: refactor function tipc_sk_recvmsg()
net: thunderx: Optimize page recycling for XDP
net: thunderx: Support for XDP header adjustment
net: thunderx: Add support for XDP_TX
net: thunderx: Add support for XDP_DROP
net: thunderx: Add basic XDP support
net: thunderx: Cleanup receive buffer allocation
net: thunderx: Optimize CQE_TX handling
net: thunderx: Optimize RBDR descriptor handling
net: thunderx: Support for page recycling
ipx: call ipxitf_put() in ioctl error path
net: sched: add helpers to handle extended actions
qed*: Fix issues in the ptp filter config implementation.
qede: Fix concurrency issue in PTP Tx path processing.
stmmac: Add support for SIMATIC IOT2000 platform
net: hns: fix ethtool_get_strings overflow in hns driver
tcp: fix wraparound issue in tcp_lp
bpf, arm64: fix jit branch offset related to ldimm64
bpf, arm64: implement jiting of BPF_XADD
...
|
|
|
Linus Torvalds
|
d3b5d35290 |
Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Ingo Molnar:
"The main x86 MM changes in this cycle were:
- continued native kernel PCID support preparation patches to the TLB
flushing code (Andy Lutomirski)
- various fixes related to 32-bit compat syscall returning address
over 4Gb in applications, launched from 64-bit binaries - motivated
by C/R frameworks such as Virtuozzo. (Dmitry Safonov)
- continued Intel 5-level paging enablement: in particular the
conversion of x86 GUP to the generic GUP code. (Kirill A. Shutemov)
- x86/mpx ABI corner case fixes/enhancements (Joerg Roedel)
- ... plus misc updates, fixes and cleanups"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits)
mm, zone_device: Replace {get, put}_zone_device_page() with a single reference to fix pmem crash
x86/mm: Fix flush_tlb_page() on Xen
x86/mm: Make flush_tlb_mm_range() more predictable
x86/mm: Remove flush_tlb() and flush_tlb_current_task()
x86/vm86/32: Switch to flush_tlb_mm_range() in mark_screen_rdonly()
x86/mm/64: Fix crash in remove_pagetable()
Revert "x86/mm/gup: Switch GUP to the generic get_user_page_fast() implementation"
x86/boot/e820: Remove a redundant self assignment
x86/mm: Fix dump pagetables for 4 levels of page tables
x86/mpx, selftests: Only check bounds-vs-shadow when we keep shadow
x86/mpx: Correctly report do_mpx_bt_fault() failures to user-space
Revert "x86/mm/numa: Remove numa_nodemask_from_meminfo()"
x86/espfix: Add support for 5-level paging
x86/kasan: Extend KASAN to support 5-level paging
x86/mm: Add basic defines/helpers for CONFIG_X86_5LEVEL=y
x86/paravirt: Add 5-level support to the paravirt code
x86/mm: Define virtual memory map for 5-level paging
x86/asm: Remove __VIRTUAL_MASK_SHIFT==47 assert
x86/boot: Detect 5-level paging support
x86/mm/numa: Remove numa_nodemask_from_meminfo()
...
|
|
|
Linus Torvalds
|
207fb8c304 |
Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"The main changes in this cycle were:
- a big round of FUTEX_UNLOCK_PI improvements, fixes, cleanups and
general restructuring
- lockdep updates such as new checks for lock_downgrade()
- introduce the new atomic_try_cmpxchg() locking API and use it to
optimize refcount code generation
- ... plus misc fixes, updates and cleanups"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
MAINTAINERS: Add FUTEX SUBSYSTEM
futex: Clarify mark_wake_futex memory barrier usage
futex: Fix small (and harmless looking) inconsistencies
futex: Avoid freeing an active timer
rtmutex: Plug preempt count leak in rt_mutex_futex_unlock()
rtmutex: Fix more prio comparisons
rtmutex: Fix PI chain order integrity
sched,tracing: Update trace_sched_pi_setprio()
sched/rtmutex: Refactor rt_mutex_setprio()
rtmutex: Clean up
sched/deadline/rtmutex: Dont miss the dl_runtime/dl_period update
sched/rtmutex/deadline: Fix a PI crash for deadline tasks
rtmutex: Deboost before waking up the top waiter
locking/ww-mutex: Limit stress test to 2 seconds
locking/atomic: Fix atomic_try_cmpxchg() semantics
lockdep: Fix per-cpu static objects
futex: Drop hb->lock before enqueueing on the rtmutex
futex: Futex_unlock_pi() determinism
futex: Rework futex_lock_pi() to use rt_mutex_*_proxy_lock()
futex,rt_mutex: Restructure rt_mutex_finish_proxy_lock()
...
|
|
|
Darrick J. Wong
|
0c9ec4beec |
ext4: support GETFSMAP ioctls
Support the GETFSMAP ioctls so that we can use the xfs free space management tools to probe ext4 as well. Note that this is a partial implementation -- we only report fixed-location metadata and free space; everything else is reported as "unknown". Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> |
|
|
Joerg Roedel
|
461a6946b1 |
iommu: Remove pci.h include from trace/events/iommu.h
The include file does not need any PCI specifics, so remove that include. Also fix the places that relied on it. Signed-off-by: Joerg Roedel <jroedel@suse.de> |