Pass the process identifiers of the triggering processes to fanotify
listeners: this information is useful for event filtering and logging.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Eric Paris <eparis@redhat.com>
Code cleanup which does the fd creation work seperately from the userspace
metadata creation. It fits better with the other code.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Eric Paris <eparis@redhat.com>
Please note that you need the patch below in addition, otherwise the
syscall wrapper stuff won't work on those 32 bit architectures which enable
the wrappers.
When enabled the syscall wrapper defines always take long parameters and then
cast them to whatever is needed. This approach doesn't work for the 32 bit
case where the original syscall takes a long long parameter, since we would
lose the upper 32 bits.
So syscalls with 64 bit arguments are special cases wrt to syscall wrappers
and enp up in the ugliness below (see also sys_fallocate). In addition these
special cased syscall wrappers have the drawback that ftrace syscall tracing
doesn't work on them, since they don't get defined by using the usual macros.
Signed-off-by: Eric Paris <eparis@redhat.com>
fanotify references anon_inode_getfd(), which is only available with
ANON_INODES enabled. Presently this bails out with the following:
LD vmlinux
fs/built-in.o: In function `sys_fanotify_init':
(.text+0x26d1c): undefined reference to `anon_inode_getfd'
make: *** [vmlinux] Error 1
which is trivially corrected by adding an ANON_INODES select.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Eric Paris <eparis@redhat.com>
Send events to userspace by reading the file descriptor from fanotify_init().
One will get blocks of data which look like:
struct fanotify_event_metadata {
__u32 event_len;
__u32 vers;
__s32 fd;
__u64 mask;
__s64 pid;
__u64 cookie;
} __attribute__ ((packed));
Simple code to retrieve and deal with events is below
while ((len = read(fan_fd, buf, sizeof(buf))) > 0) {
struct fanotify_event_metadata *metadata;
metadata = (void *)buf;
while(FAN_EVENT_OK(metadata, len)) {
[PROCESS HERE!!]
if (metadata->fd >= 0 && close(metadata->fd) != 0)
goto fail;
metadata = FAN_EVENT_NEXT(metadata, len);
}
}
Signed-off-by: Eric Paris <eparis@redhat.com>
NAME
fanotify_mark - add, remove, or modify an fanotify mark on a
filesystem object
SYNOPSIS
int fanotify_mark(int fanotify_fd, unsigned int flags, u64 mask,
int dfd, const char *pathname)
DESCRIPTION
fanotify_mark() is used to add remove or modify a mark on a filesystem
object. Marks are used to indicate that the fanotify group is
interested in events which occur on that object. At this point in
time marks may only be added to files and directories.
fanotify_fd must be a file descriptor returned by fanotify_init()
The flags field must contain exactly one of the following:
FAN_MARK_ADD - or the bits in mask and ignored mask into the mark
FAN_MARK_REMOVE - bitwise remove the bits in mask and ignored mark
from the mark
The following values can be OR'd into the flags field:
FAN_MARK_DONT_FOLLOW - same meaning as O_NOFOLLOW as described in open(2)
FAN_MARK_ONLYDIR - same meaning as O_DIRECTORY as described in open(2)
dfd may be any of the following:
AT_FDCWD: the object will be lookup up based on pathname similar
to open(2)
file descriptor of a directory: if pathname is not NULL the
object to modify will be lookup up similar to openat(2)
file descriptor of the final object: if pathname is NULL the
object to modify will be the object referenced by dfd
The mask is the bitwise OR of the set of events of interest such as:
FAN_ACCESS - object was accessed (read)
FAN_MODIFY - object was modified (write)
FAN_CLOSE_WRITE - object was writable and was closed
FAN_CLOSE_NOWRITE - object was read only and was closed
FAN_OPEN - object was opened
FAN_EVENT_ON_CHILD - interested in objected that happen to
children. Only relavent when the object
is a directory
FAN_Q_OVERFLOW - event queue overflowed (not implemented)
RETURN VALUE
On success, this system call returns 0. On error, -1 is
returned, and errno is set to indicate the error.
ERRORS
EINVAL An invalid value was specified in flags.
EINVAL An invalid value was specified in mask.
EINVAL An invalid value was specified in ignored_mask.
EINVAL fanotify_fd is not a file descriptor as returned by
fanotify_init()
EBADF fanotify_fd is not a valid file descriptor
EBADF dfd is not a valid file descriptor and path is NULL.
ENOTDIR dfd is not a directory and path is not NULL
EACCESS no search permissions on some part of the path
ENENT file not found
ENOMEM Insufficient kernel memory is available.
CONFORMING TO
These system calls are Linux-specific.
Signed-off-by: Eric Paris <eparis@redhat.com>
This patch simply declares the new sys_fanotify_mark syscall
int fanotify_mark(int fanotify_fd, unsigned int flags, u64_mask,
int dfd const char *pathname)
Signed-off-by: Eric Paris <eparis@redhat.com>
NAME
fanotify_init - initialize an fanotify group
SYNOPSIS
int fanotify_init(unsigned int flags, unsigned int event_f_flags, int priority);
DESCRIPTION
fanotify_init() initializes a new fanotify instance and returns a file
descriptor associated with the new fanotify event queue.
The following values can be OR'd into the flags field:
FAN_NONBLOCK Set the O_NONBLOCK file status flag on the new open file description.
Using this flag saves extra calls to fcntl(2) to achieve the same
result.
FAN_CLOEXEC Set the close-on-exec (FD_CLOEXEC) flag on the new file descriptor.
See the description of the O_CLOEXEC flag in open(2) for reasons why
this may be useful.
The event_f_flags argument is unused and must be set to 0
The priority argument is unused and must be set to 0
RETURN VALUE
On success, this system call return a new file descriptor. On error, -1 is
returned, and errno is set to indicate the error.
ERRORS
EINVAL An invalid value was specified in flags.
EINVAL A non-zero valid was passed in event_f_flags or in priority
ENFILE The system limit on the total number of file descriptors has been reached.
ENOMEM Insufficient kernel memory is available.
CONFORMING TO
These system calls are Linux-specific.
Signed-off-by: Eric Paris <eparis@redhat.com>
This patch defines a new syscall fanotify_init() of the form:
int sys_fanotify_init(unsigned int flags, unsigned int event_f_flags,
unsigned int priority)
This syscall is used to create and fanotify group. This is very similar to
the inotify_init() syscall.
Signed-off-by: Eric Paris <eparis@redhat.com>
Currently if 2 events are going to be merged on the notication queue with
different masks the second event will be cloned and will replace the first
event. However if this notification queue is the only place referencing
the event in question there is no reason not to just update the event in
place. We can tell this if the event->refcnt == 1. Since we hold a
reference for each queue this event is on we know that when refcnt == 1
this is the only queue. The other concern is that it might be about to be
added to a new queue, but this can't be the case since fsnotify holds a
reference on the event until it is finished adding it to queues.
Signed-off-by: Eric Paris <eparis@redhat.com>
Instead of just merging fanotify events if they are exactly the same, merge
notification events with different masks. To do this we have to clone the
old event, update the mask in the new event with the new merged mask, and
put the new event in place of the old event.
Signed-off-by: Eric Paris <eparis@redhat.com>
fanotify listeners get an open file descriptor to the object in question so
the ordering of operations is not as important as in other notification
systems. inotify will drop events if the last event in the event FIFO is
the same as the current event. This patch will drop fanotify events if
they are the same as another event anywhere in the event FIFO.
Signed-off-by: Eric Paris <eparis@redhat.com>
fanotify is a novel file notification system which bases notification on
giving userspace both an event type (open, close, read, write) and an open
file descriptor to the object in question. This should address a number of
races and problems with other notification systems like inotify and dnotify
and should allow the future implementation of blocking or access controlled
notification. These are useful for on access scanners or hierachical storage
management schemes.
This patch just implements the basics of the fsnotify functions.
Signed-off-by: Eric Paris <eparis@redhat.com>
All callers to fsnotify_find_mark_entry() except one take and
release inode->i_lock around the call. Take the lock inside
fsnotify_find_mark_entry() instead.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Eric Paris <eparis@redhat.com>
nomenclature change. Used to call things 'entries' but now we just call
them 'marks.' Do those changes for dnotify.
Signed-off-by: Eric Paris <eparis@redhat.com>
previously I used mark_entry when talking about marks on inodes. The
_entry is pretty useless. Just use "mark" instead.
Signed-off-by: Eric Paris <eparis@redhat.com>
Some fsnotify operations send a struct file. This is more information than
we technically need. We instead send a struct path in all cases instead of
sometimes a path and sometimes a file.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Eric Paris <eparis@redhat.com>
To differentiate between inode and vfsmount (or other future) types of
marks we add a flags field and set the inode bit on inode marks (the only
currently supported type of mark)
Signed-off-by: Eric Paris <eparis@redhat.com>
The addition of marks on vfs mounts will be simplified if the inode
specific parts of a mark and the vfsmnt specific parts of a mark are
actually in a union so naming can be easy. This patch just implements the
inode struct and the union.
Signed-off-by: Eric Paris <eparis@redhat.com>
To ensure that a group will not duplicate events when it receives it based
on the vfsmount and the inode should_send_event test we should distinguish
those two cases. We pass a vfsmount to this function so groups can make
their own determinations.
Signed-off-by: Eric Paris <eparis@redhat.com>
currently all of the notification systems implemented select which inodes
they care about and receive messages only about those inodes (or the
children of those inodes.) This patch begins to flesh out fsnotify support
for the concept of listeners that want to hear notification for an inode
accessed below a given monut point. This patch implements a second list
of fsnotify groups to hold these types of groups and a second global mask
to hold the events of interest for this type of group.
The reason we want a second group list and mask is because the inode based
notification should_send_event support which makes each group look for a mark
on the given inode. With one nfsmount listener that means that every group would
have to take the inode->i_lock, look for their mark, not find one, and return
for every operation. By seperating vfsmount from inode listeners only when
there is a inode listener will the inode groups have to look for their
mark and take the inode lock. vfsmount listeners will have to grab the lock and
look for a mark but there should be fewer of them, and one vfsmount listener
won't cause the i_lock to be grabbed and released for every fsnotify group
on every io operation.
Signed-off-by: Eric Paris <eparis@redhat.com>
Currently all fsnotify groups are added immediately to the
fsnotify_inode_groups list upon creation. This means, even groups with no
watches (common for audit) will be on the global tracking list and will
get checked for every event. This patch adds groups to the global list on
when the first inode mark is added to the group.
Signed-of-by: Eric Paris <eparis@redhat.com>
Currently the comments say that group->num_marks is held because the group
is on the fsnotify_group list. This isn't strictly the case, we really
just hold the num_marks for the life of the group (any time group->refcnt
is != 0) This patch moves the initialization stuff and makes it clear when
it is really being held.
Signed-off-by: Eric Paris <eparis@redhat.com>
Simple renaming patch. fsnotify is about to support mount point listeners
so I am renaming fsnotify_groups and fsnotify_mask to indicate these are lists
used only for groups which have watches on inodes.
Signed-off-by: Eric Paris <eparis@redhat.com>
fsnotify_obtain_group was intended to be able to find an already existing
group. Nothing uses that functionality. This just renames it to
fsnotify_alloc_group so it is clear what it is doing.
Signed-off-by: Eric Paris <eparis@redhat.com>
fsnotify_obtain_group uses kzalloc but then proceedes to set things to 0.
This patch just deletes those useless lines.
Signed-off-by: Eric Paris <eparis@redhat.com>
The original fsnotify interface has a group-num which was intended to be
able to find a group after it was added. I no longer think this is a
necessary thing to do and so we remove the group_num.
Signed-off-by: Eric Paris <eparis@redhat.com>
fsnotify_replace_event need to lock both the old and the new event. This
causes lockdep to get all pissed off since it dosn't know this is safe.
It's safe in this case since the new event is impossible to be reached from
other places in the kernel.
Signed-off-by: Eric Paris <eparis@redhat.com>
fanotify would like to clone events already on its notification list, make
changes to the new event, and then replace the old event on the list with
the new event. This patch implements the replace functionality of that
process.
Signed-off-by: Eric Paris <eparis@redhat.com>
fsnotify_clone_event will take an event, clone it, and return the cloned
event to the caller. Since events may be in use by multiple fsnotify
groups simultaneously certain event entries (such as the mask) cannot be
changed after the event was created. Since fanotify would like to merge
events happening on the same file it needs a new clean event to work with
so it can change any fields it wishes.
Signed-off-by: Eric Paris <eparis@redhat.com>
inotify only wishes to merge a new event with the last event on the
notification fifo. fanotify is willing to merge any events including by
means of bitwise OR masks of multiple events together. This patch moves
the inotify event merging logic out of the generic fsnotify notification.c
and into the inotify code. This allows each use of fsnotify to provide
their own merge functionality.
Signed-off-by: Eric Paris <eparis@redhat.com>
fanotify needs a path in order to open an fd to the object which changed.
Currently notifications to inode's parents are done using only the inode.
For some parental notification we have the entire file, send that so
fanotify can use it.
Signed-off-by: Eric Paris <eparis@redhat.com>
fanotify is going to need to look at file->private_data to know if an event
should be sent or not. This passes the data (which might be a file,
dentry, inode, or none) to the should_send function calls so fanotify can
get that information when available
Signed-off-by: Eric Paris <eparis@redhat.com>
fanotify is only interested in event types which contain enough information
to open the original file in the context of the fanotify listener. Since
fanotify may not want to send events if that data isn't present we pass
the data type to the should_send_event function call so fanotify can express
its lack of interest.
Signed-off-by: Eric Paris <eparis@redhat.com>
inotify was supposed to have a dmesg printk ratelimitor which would cause
inotify to only emit one message per boot. The static bool was never set
so it kept firing messages. This patch correctly limits warnings in multiple
places.
Signed-off-by: Eric Paris <eparis@redhat.com>
Prior to 2.6.31 inotify would not reuse watch descriptors until all of
them had been used at least once. After the rewrite inotify would reuse
watch descriptors. The selinux utility 'restorecond' was found to have
problems when watch descriptors were reused. This patch reverts to the
pre inotify rewrite behavior to not reuse watch descriptors.
Signed-off-by: Eric Paris <eparis@redhat.com>
fsnotify event initialization is done entry by entry with almost everything
set to either 0 or NULL. Use kmem_cache_zalloc and only initialize things
that need non-zero initialization. Also means we don't have to change
initialization entries based on the config options.
Signed-off-by: Eric Paris <eparis@redhat.com>
inotify_free_mark casts directly from an fsnotify_mark_entry to an
inotify_inode_mark_entry. This works, but should use container_of instead
for future proofing.
Signed-off-by: Eric Paris <eparis@redhat.com>
Currently fsnotify defines a static fsnotify event which is sent when a
group overflows its allotted queue length. This patch just allocates that
event from the event cache rather than defining it statically. There is no
known reason that the current implementation is wrong, but this makes sure the
event is initialized and created like any other.
Signed-off-by: Eric Paris <eparis@redhat.com>
This patch allows a task to add a second fsnotify mark to an inode for the
same group. This mark will be added to the end of the inode's list and
this will never be found by the stand fsnotify_find_mark() function. This
is useful if a user wants to add a new mark before removing the old one.
Signed-off-by: Eric Paris <eparis@redhat.com>
Simple copy fsnotify information from one mark to another in preparation
for the second mark to replace the first.
Signed-off-by: Eric Paris <eparis@redhat.com>
This patch moves all of the idr editing operations into their own idr
functions. It makes it easier to prove locking correctness and to to
understand the code flow.
Signed-off-by: Eric Paris <eparis@redhat.com>
Make sure that s_umount is acquired *before* we drop the final
active reference; we still have the fast path (atomic_dec_unless)
and we have gotten rid of the window between the moment when
s_active hits zero and s_umount is acquired. Which simplifies
the living hell out of grab_super() and inotify pin_to_kill()
stuff.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* 'for-linus' of git://git.infradead.org/users/eparis/notify:
inotify: don't leak user struct on inotify release
inotify: race use after free/double free in inotify inode marks
inotify: clean up the inotify_add_watch out path
Inotify: undefined reference to `anon_inode_getfd'
Manual merge to remove duplicate "select ANON_INODES" from Kconfig file
inotify_new_group() receives a get_uid-ed user_struct and saves the
reference on group->inotify_data.user. The problem is that free_uid() is
never called on it.
Issue seem to be introduced by 63c882a0 (inotify: reimplement inotify
using fsnotify) after 2.6.30.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Eric Paris <eparis@parisplace.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Eric Paris <eparis@redhat.com>
There is a race in the inotify add/rm watch code. A task can find and
remove a mark which doesn't have all of it's references. This can
result in a use after free/double free situation.
Task A Task B
------------ -----------
inotify_new_watch()
allocate a mark (refcnt == 1)
add it to the idr
inotify_rm_watch()
inotify_remove_from_idr()
fsnotify_put_mark()
refcnt hits 0, free
take reference because we are on idr
[at this point it is a use after free]
[time goes on]
refcnt may hit 0 again, double free
The fix is to take the reference BEFORE the object can be found in the
idr.
Signed-off-by: Eric Paris <eparis@redhat.com>
Cc: <stable@kernel.org>
inotify_add_watch explictly frees the unused inode mark, but it can just
use the generic code. Just do that.
Signed-off-by: Eric Paris <eparis@redhat.com>
Fix:
fs/built-in.o: In function `sys_inotify_init1':
summary.c:(.text+0x347a4): undefined reference to `anon_inode_getfd'
found by kautobuild with arms bcmring_defconfig, which ends up with
INOTIFY_USER enabled (through the 'default y') but leaves ANON_INODES
unset. However, inotify_user.c uses anon_inode_getfd().
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Eric Paris <eparis@redhat.com>
CONFIG_INOTIFY_USER defined but CONFIG_ANON_INODES undefined will result
in the following build failure:
LD vmlinux
fs/built-in.o: In function 'sys_inotify_init1':
(.text.sys_inotify_init1+0x22c): undefined reference to 'anon_inode_getfd'
fs/built-in.o: In function `sys_inotify_init1':
(.text.sys_inotify_init1+0x22c): relocation truncated to fit: R_MIPS_26 against 'anon_inode_getfd'
make[2]: *** [vmlinux] Error 1
make[1]: *** [sub-make] Error 2
make: *** [all] Error 2
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
inotify will WARN() if it finds that the idr and the fsnotify internals
somehow got out of sync. It was only supposed to do this once but due
to this stupid bug it would warn every single time a problem was
detected.
Signed-off-by: Eric Paris <eparis@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 7e790dd5fc ("inotify: fix
error paths in inotify_update_watch") inotify changed the manor in which
it gave watch descriptors back to userspace. Previous to this commit
inotify acted like the following:
inotify_add_watch(X, Y, Z) = 1
inotify_rm_watch(X, 1);
inotify_add_watch(X, Y, Z) = 2
but after this patch inotify would return watch descriptors like so:
inotify_add_watch(X, Y, Z) = 1
inotify_rm_watch(X, 1);
inotify_add_watch(X, Y, Z) = 1
which I saw as equivalent to opening an fd where
open(file) = 1;
close(1);
open(file) = 1;
seemed perfectly reasonable. The issue is that quite a bit of userspace
apparently relies on the behavior in which watch descriptors will not be
quickly reused. KDE relies on it, I know some selinux packages rely on
it, and I have heard complaints from other random sources such as debian
bug 558981.
Although the man page implies what we do is ok, we broke userspace so
this patch almost reverts us to the old behavior. It is still slightly
racey and I have patches that would fix that, but they are rather large
and this will fix it for all real world cases. The race is as follows:
- task1 creates a watch and blocks in idr_new_watch() before it updates
the hint.
- task2 creates a watch and updates the hint.
- task1 updates the hint with it's older wd
- task removes the watch created by task2
- task adds a new watch and will reuse the wd originally given to task2
it requires moving some locking around the hint (last_wd) but this should
solve it for the real world and be -stable safe.
As a side effect this patch papers over a bug in the lib/idr code which
is causing a large number WARN's to pop on people's system and many
reports in kerneloops.org. I'm working on the root cause of that idr
bug seperately but this should make inotify immune to that issue.
Signed-off-by: Eric Paris <eparis@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For consistency drop & in front of every proc_handler. Explicity
taking the address is unnecessary and it prevents optimizations
like stubbing the proc_handlers to NULL.
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Now that sys_sysctl is a generic wrapper around /proc/sys .ctl_name
and .strategy members of sysctl tables are dead code. Remove them.
Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
If we do rename a dir entry, like this:
rename("/tmp/ino7UrgoJ.rename1", "/tmp/ino7UrgoJ.rename2")
rename("/tmp/ino7UrgoJ.rename2", "/tmp/ino7UrgoJ")
The duplicate events should be coalesced into a single event. But those two
events do not be coalesced into a single event, due to some bad check in
event_compare(). It can not match the two NULL inodes as the same event.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
fsnotify_add_mark is supposed to add a mark to the g_list and i_list and to
set the group and inode for the mark. fsnotify_destroy_mark_by_entry uses
the fact that ->group != NULL to know if this group should be destroyed or
if it's already been done.
But fsnotify_add_mark sets the group and inode before it actually adds the
mark to the i_list and g_list. This can result in a race in inotify, it
requires 3 threads.
sys_inotify_add_watch("file") sys_inotify_add_watch("file") sys_inotify_rm_watch([a])
inotify_update_watch()
inotify_new_watch()
inotify_add_to_idr()
^--- returns wd = [a]
inotfiy_update_watch()
inotify_new_watch()
inotify_add_to_idr()
fsnotify_add_mark()
^--- returns wd = [b]
returns to userspace;
inotify_idr_find([a])
^--- gives us the pointer from task 1
fsnotify_add_mark()
^--- this is going to set the mark->group and mark->inode fields, but will
return -EEXIST because of the race with [b].
fsnotify_destroy_mark()
^--- since ->group != NULL we call back
into inotify_freeing_mark() which calls
inotify_remove_from_idr([a])
since fsnotify_add_mark() failed we call:
inotify_remove_from_idr([a]) <------WHOOPS it's not in the idr, this could
have been any entry added later!
The fix is to make sure we don't set mark->group until we are sure the mark is
on the inode and fsnotify_add_mark will return success.
Signed-off-by: Eric Paris <eparis@redhat.com>
Seperating the addition and update of marks in inotify resulted in a
regression in that inotify never gets events. The inotify group mask is
always 0. This mask should be updated any time a new mark is added.
Signed-off-by: Eric Paris <eparis@redhat.com>
0db501bd06 introduced a regresion in that it now sends a nul
terminator but the length accounting when checking for space or
reporting to userspace did not take this into account. This corrects
all of the rounding logic.
Signed-off-by: Eric Paris <eparis@redhat.com>
When an event has no pathname, there's no need to pad it with a null byte and
therefore generate an inotify_event sized block of zeros. This fixes a
regression introduced by commit 0db501bd06 where
my system wouldn't finish booting because some process was being confused by
this.
Signed-off-by: Brian Rogers <brian@xyzw.org>
Signed-off-by: Eric Paris <eparis@redhat.com>
Before the rewrite copy_event_to_user always wrote a terqminating '\0'
byte to user space after the filename. Since the rewrite that
terminating byte was skipped if your filename is exactly a multiple of
event_size. Ouch!
So add one byte to name_size before we round up and use clear_user to
set userspace to zero like /dev/zero does instead of copying the
strange nul_inotify_event. I can't quite convince myself len_to_zero
will never exceed 16 and even if it doesn't clear_user should be more
efficient and a more accurate reflection of what the code is trying to
do.
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
The are races around the idr storage of inotify watches. It's possible
that a watch could be found from sys_inotify_rm_watch() in the idr, but it
could be removed from the idr before that code does it's removal. Move the
locking and the refcnt'ing so that these have to happen atomically.
Signed-off-by: Eric Paris <eparis@redhat.com>
If an inotify watch is left in the idr when an fsnotify group is destroyed
this will lead to a BUG. This is not a dangerous situation and really
indicates a programming bug and leak of memory. This patch changes it to
use a WARN and a printk rather than killing people's boxes.
Signed-off-by: Eric Paris <eparis@redhat.com>
There is nothing known wrong with the inotify watch addition/modification
but this patch seperates the two code paths to make them each easy to
verify as correct.
Signed-off-by: Eric Paris <eparis@redhat.com>
The inotify_add_watch man page specifies that inotify_add_watch() will
return a non-negative integer. However, historically the inotify
watches started at 1, not at 0.
Turns out that the inotifywait program provided by the inotify-tools
package doesn't properly handle a 0 watch descriptor. In 7e790dd5 we
changed from starting at 1 to starting at 0. This patch starts at 1,
just like in previous kernels, but also just like in previous kernels
it's possible for it to wrap back to 0. This preserves the kernel
functionality exactly like it was before the patch (neither method broke
the spec)
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In f44aebcc the tail drop logic of events with no file backing
(q_overflow and in_ignored) was reversed so IN_IGNORED events would
never be tail dropped. This now means that Q_OVERFLOW events are NOT
tail dropped. The fix is to not tail drop IN_IGNORED, but to tail drop
Q_OVERFLOW.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
inotify decides if private data it passed to get added to an event was
used by checking list_empty(). But it's possible that the event may
have been dequeued and the private event removed so it would look empty.
The fix is to use the return code from fsnotify_add_notify_event rather
than looking at the list.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
inotify can have a watchs removed under filesystem reclaim.
=================================
[ INFO: inconsistent lock state ]
2.6.31-rc2 #16
---------------------------------
inconsistent {IN-RECLAIM_FS-W} -> {RECLAIM_FS-ON-W} usage.
khubd/217 [HC0[0]:SC0[0]:HE1:SE1] takes:
(iprune_mutex){+.+.?.}, at: [<c10ba899>] invalidate_inodes+0x20/0xe3
{IN-RECLAIM_FS-W} state was registered at:
[<c10536ab>] __lock_acquire+0x2c9/0xac4
[<c1053f45>] lock_acquire+0x9f/0xc2
[<c1308872>] __mutex_lock_common+0x2d/0x323
[<c1308c00>] mutex_lock_nested+0x2e/0x36
[<c10ba6ff>] shrink_icache_memory+0x38/0x1b2
[<c108bfb6>] shrink_slab+0xe2/0x13c
[<c108c3e1>] kswapd+0x3d1/0x55d
[<c10449b5>] kthread+0x66/0x6b
[<c1003fdf>] kernel_thread_helper+0x7/0x10
[<ffffffff>] 0xffffffff
Two things are needed to fix this. First we need a method to tell
fsnotify_create_event() to use GFP_NOFS and second we need to stop using
one global IN_IGNORED event and allocate them one at a time. This solves
current issues with multiple IN_IGNORED on a queue having tail drop
problems and simplifies the allocations since we don't have to worry about
two tasks opperating on the IGNORED event concurrently.
Signed-off-by: Eric Paris <eparis@redhat.com>
fsnotify drops new events when they are the same as the tail event on the
queue to be sent to userspace. The problem is that if the event comes with
a path we forget to break out of the switch statement and fall into the
code path which matches on events that do not have any type of file backed
information (things like IN_UNMOUNT and IN_Q_OVERFLOW). The problem is
that this code thinks all such events should be dropped. Fix is to add a
break.
Signed-off-by: Eric Paris <eparis@redhat.com>
inotify drops events if the last event on the queue is the same as the
current event. But it does 2 things wrong. First it is comparing old->inode
with new->inode. But after an event if put on the queue the ->inode is no
longer allowed to be used. It's possible between the last event and this new
event the inode could be reused and we would falsely match the inode's memory
address between two differing events.
The second problem is that when a file is removed fsnotify is passed the
negative dentry for the removed object rather than the postive dentry from
immediately before the removal. This mean the (broken) inotify tail drop code
was matching the NULL ->inode of differing events.
The fix is to check the file name which is stored with events when doing the
tail drop instead of wrongly checking the address of the stored ->inode.
Reported-by: Scott James Remnant <scott@ubuntu.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
fsnotify doens't give the user anything. If someone chooses inotify or
dnotify it should build fsnotify, if they don't select one it shouldn't be
built. This patch changes fsnotify to be a def_bool=n and makes everything
else select it. Also fixes the issue people complained about on lwn where
gdm hung because they didn't have inotify and they didn't get the inotify
build option.....
Signed-off-by: Eric Paris <eparis@redhat.com>
inotify_update_watch could leave things in a horrid state on a number of
error paths. We could try to remove idr entries that didn't exist, we
could send an IN_IGNORED to userspace for watches that don't exist, and a
bit of other stupidity. Clean these up by doing the idr addition before we
put the mark on the inode since we can clean that up on error and getting
off the inode's mark list is hard.
Signed-off-by: Eric Paris <eparis@redhat.com>
inotify_add_watch had a couple of problems. The biggest being that if
inotify_add_watch was called on the same inode twice (to update or change the
event mask) a refence was taken on the original inode mark by
fsnotify_find_mark_entry but was not being dropped at the end of the
inotify_add_watch call. Thus if inotify_rm_watch was called although the mark
was removed from the inode, the refcnt wouldn't hit zero and we would leak
memory.
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
The inotify rewrite forgot to drop the inotify watch use cound when a watch
was removed. This means that a single inotify fd can only ever register a
maximum of /proc/sys/fs/max_user_watches even if some of those had been
freed.
Signed-off-by: Eric Paris <eparis@redhat.com>
The per-user inotify_devs value is incremented each time a new file is
allocated, but never decremented. This led to inotify_init failing after a
limited number of calls.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
inotify_destroy_mark_entry could get called twice for the same mark since it
is called directly in inotify_rm_watch and when the mark is being destroyed for
another reason. As an example assume that the file being watched was just
deleted so inotify_destroy_mark_entry would get called from the path
fsnotify_inoderemove() -> fsnotify_destroy_marks_by_inode() ->
fsnotify_destroy_mark_entry() -> inotify_destroy_mark_entry(). If this
happened at the same time as userspace tried to remove a watch via
inotify_rm_watch we could attempt to remove the mark from the idr twice and
could thus double dec the ref cnt and potentially could be in a use after
free/double free situation. The fix is to have inotify_rm_watch use the
generic recursive safe fsnotify_destroy_mark_by_entry() so we are sure the
inotify_destroy_mark_entry() function can only be called one.
This patch also renames the function to inotify_ingored_remove_idr() so it is
clear what is actually going on in the function.
Hopefully this fixes:
[ 20.342058] idr_remove called for id=20 which is not allocated.
[ 20.348000] Pid: 1860, comm: udevd Not tainted 2.6.30-tip #1077
[ 20.353933] Call Trace:
[ 20.356410] [<ffffffff811a82b7>] idr_remove+0x115/0x18f
[ 20.361737] [<ffffffff8134259d>] ? _spin_lock+0x6d/0x75
[ 20.367061] [<ffffffff8111640a>] ? inotify_destroy_mark_entry+0xa3/0xcf
[ 20.373771] [<ffffffff8111641e>] inotify_destroy_mark_entry+0xb7/0xcf
[ 20.380306] [<ffffffff81115913>] inotify_freeing_mark+0xe/0x10
[ 20.386238] [<ffffffff8111410d>] fsnotify_destroy_mark_by_entry+0x143/0x170
[ 20.393293] [<ffffffff811163a3>] inotify_destroy_mark_entry+0x3c/0xcf
[ 20.399829] [<ffffffff811164d1>] sys_inotify_rm_watch+0x9b/0xc6
[ 20.405850] [<ffffffff8100bcdb>] system_call_fastpath+0x16/0x1b
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Eric Paris <eparis@redhat.com>
Tested-by: Peter Ziljlstra <peterz@infradead.org>
Most fsnotify listeners (all but inotify) do not care about marks being
freed. Allow groups to set freeing_mark to null and do not call any
function if it is set that way.
Signed-off-by: Eric Paris <eparis@redhat.com>
inotify and dnotify will both indicate that they want any event which came
from a child inode. The fix is to mask off FS_EVENT_ON_CHILD when deciding
if inotify or dnotify is interested in a given event.
Signed-off-by: Eric Paris <eparis@redhat.com>
entry->lock is needed to make sure entry->mask does not change while
manipulating it. In dnotify_should_send_event() we don't care if we get an
old or a new mask value out of this entry so there is no point it taking
the lock.
Signed-off-by: Eric Paris <eparis@redhat.com>
dnotify_should send event assigned a bool using ?true:false when computing
a bit operation. This is poitless and the bool type does this for us.
Signed-off-by: Eric Paris <eparis@redhat.com>
Reimplement inotify_user using fsnotify. This should be feature for feature
exactly the same as the original inotify_user. This does not make any changes
to the in kernel inotify feature used by audit. Those patches (and the eventual
removal of in kernel inotify) will come after the new inotify_user proves to be
working correctly.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
When an fs is unmounted with an fsnotify mark entry attached to one of its
inodes we need to destroy that mark entry and we also (like inotify) send
an unmount event.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
This patch pins any inodes with an fsnotify mark in core. The idea is that
as soon as the mark is removed from the inode->fsnotify_mark_entries list
the inode will be iput. In reality is doesn't quite work exactly this way.
The igrab will happen when the mark is added to an inode, but the iput will
happen when the inode pointer is NULL'd inside the mark.
It's possible that 2 racing things will try to remove the mark from
different directions. One may try to remove the mark because of an
explicit request and one might try to remove it because the inode was
deleted. It's possible that the removal because of inode deletion will
remove the mark from the inode's list, but the removal by explicit request
will actually set entry->inode == NULL; and call the iput. This is safe.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
inotify needs per group information attached to events. This patch allows
groups to attach private information and implements a callback so that
information can be freed when an event is being destroyed.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
As part of the standard inotify events it includes a correlation cookie
between two dentry move operations. This patch includes the same behaviour
in fsnotify events. It is needed so that inotify userspace can be
implemented on top of fsnotify.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
When inotify wants to send events to a directory about a child it includes
the name of the original file. This patch collects that filename and makes
it available for notification.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
inotify needs to do asyc notification in which event information is stored
on a queue until the listener is ready to receive it. This patch
implements a generic notification queue for inotify (and later fanotify) to
store events to be sent at a later time.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Reimplement dnotify using fsnotify.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
inotify and dnotify both use a similar parent notification mechanism. We
add a generic parent notification mechanism to fsnotify for both of these
to use. This new machanism also adds the dentry flag optimization which
exists for inotify to dnotify.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
This patch creates a way for fsnotify groups to attach marks to inodes.
These marks have little meaning to the generic fsnotify infrastructure
and thus their meaning should be interpreted by the group that attached
them to the inode's list.
dnotify and inotify will make use of these markings to indicate which
inodes are of interest to their respective groups. But this implementation
has the useful property that in the future other listeners could actually
use the marks for the exact opposite reason, aka to indicate which inodes
it had NO interest in.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
fsnotify is a backend for filesystem notification. fsnotify does
not provide any userspace interface but does provide the basis
needed for other notification schemes such as dnotify. fsnotify
can be extended to be the backend for inotify or the upcoming
fanotify. fsnotify provides a mechanism for "groups" to register for
some set of filesystem events and to then deliver those events to
those groups for processing.
fsnotify has a number of benefits, the first being actually shrinking the size
of an inode. Before fsnotify to support both dnotify and inotify an inode had
unsigned long i_dnotify_mask; /* Directory notify events */
struct dnotify_struct *i_dnotify; /* for directory notifications */
struct list_head inotify_watches; /* watches on this inode */
struct mutex inotify_mutex; /* protects the watches list
But with fsnotify this same functionallity (and more) is done with just
__u32 i_fsnotify_mask; /* all events for this inode */
struct hlist_head i_fsnotify_mark_entries; /* marks on this inode */
That's right, inotify, dnotify, and fanotify all in 64 bits. We used that
much space just in inotify_watches alone, before this patch set.
fsnotify object lifetime and locking is MUCH better than what we have today.
inotify locking is incredibly complex. See 8f7b0ba1c8 as an example of
what's been busted since inception. inotify needs to know internal semantics
of superblock destruction and unmounting to function. The inode pinning and
vfs contortions are horrible.
no fsnotify implementers do allocation under locks. This means things like
f04b30de3 which (due to an overabundance of caution) changes GFP_KERNEL to
GFP_NOFS can be reverted. There are no longer any allocation rules when using
or implementing your own fsnotify listener.
fsnotify paves the way for fanotify. In brief fanotify is a notification
mechanism that delivers the lisener both an 'event' and an open file descriptor
to the object in question. This means that fanotify is pathname agnostic.
Some on lkml may not care for the original companies or users that pushed for
TALPA, but fanotify was designed with flexibility and input for other users in
mind. The readahead group expressed interest in fanotify as it could be used
to profile disk access on boot without breaking the audit system. The desktop
search groups have also expressed interest in fanotify as it solves a number
of the race conditions and problems present with managing inotify when more
than a limited number of specific files are of interest. fanotify can provide
for a userspace access control system which makes it a clean interface for AV
vendors to hook without trying to do binary patching on the syscall table,
LSM, and everywhere else they do their things today. With this patch series
fanotify can be implemented in less than 1200 lines of easy to review code.
Almost all of which is the socket based user interface.
This patch series builds fsnotify to the point that it can implement
dnotify and inotify_user. Patches exist and will be sent soon after
acceptance to finish the in kernel inotify conversion (audit) and implement
fanotify.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
There is what we believe to be a false positive reported by lockdep.
inotify_inode_queue_event() => take inotify_mutex => kernel_event() =>
kmalloc() => SLOB => alloc_pages_node() => page reclaim => slab reclaim =>
dcache reclaim => inotify_inode_is_dead => take inotify_mutex => deadlock
The plan is to fix this via lockdep annotation, but that is proving to be
quite involved.
The patch flips the allocation over to GFP_NFS to shut the warning up, for
the 2.6.30 release.
Hopefully we will fix this for real in 2.6.31. I'll queue a patch in -mm
to switch it back to GFP_KERNEL so we don't forget.
=================================
[ INFO: inconsistent lock state ]
2.6.30-rc2-next-20090417 #203
---------------------------------
inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage.
kswapd0/380 [HC0[0]:SC0[0]:HE1:SE1] takes:
(&inode->inotify_mutex){+.+.?.}, at: [<ffffffff8112f1b5>] inotify_inode_is_dead+0x35/0xb0
{RECLAIM_FS-ON-W} state was registered at:
[<ffffffff81079188>] mark_held_locks+0x68/0x90
[<ffffffff810792a5>] lockdep_trace_alloc+0xf5/0x100
[<ffffffff810f5261>] __kmalloc_node+0x31/0x1e0
[<ffffffff81130652>] kernel_event+0xe2/0x190
[<ffffffff81130826>] inotify_dev_queue_event+0x126/0x230
[<ffffffff8112f096>] inotify_inode_queue_event+0xc6/0x110
[<ffffffff8110444d>] vfs_create+0xcd/0x140
[<ffffffff8110825d>] do_filp_open+0x88d/0xa20
[<ffffffff810f6b68>] do_sys_open+0x98/0x140
[<ffffffff810f6c50>] sys_open+0x20/0x30
[<ffffffff8100c272>] system_call_fastpath+0x16/0x1b
[<ffffffffffffffff>] 0xffffffffffffffff
irq event stamp: 690455
hardirqs last enabled at (690455): [<ffffffff81564fe4>] _spin_unlock_irqrestore+0x44/0x80
hardirqs last disabled at (690454): [<ffffffff81565372>] _spin_lock_irqsave+0x32/0xa0
softirqs last enabled at (690178): [<ffffffff81052282>] __do_softirq+0x202/0x220
softirqs last disabled at (690157): [<ffffffff8100d50c>] call_softirq+0x1c/0x50
other info that might help us debug this:
2 locks held by kswapd0/380:
#0: (shrinker_rwsem){++++..}, at: [<ffffffff810d0bd7>] shrink_slab+0x37/0x180
#1: (&type->s_umount_key#17){++++..}, at: [<ffffffff8110cfbf>] shrink_dcache_memory+0x11f/0x1e0
stack backtrace:
Pid: 380, comm: kswapd0 Not tainted 2.6.30-rc2-next-20090417 #203
Call Trace:
[<ffffffff810789ef>] print_usage_bug+0x19f/0x200
[<ffffffff81018bff>] ? save_stack_trace+0x2f/0x50
[<ffffffff81078f0b>] mark_lock+0x4bb/0x6d0
[<ffffffff810799e0>] ? check_usage_forwards+0x0/0xc0
[<ffffffff8107b142>] __lock_acquire+0xc62/0x1ae0
[<ffffffff810f478c>] ? slob_free+0x10c/0x370
[<ffffffff8107c0a1>] lock_acquire+0xe1/0x120
[<ffffffff8112f1b5>] ? inotify_inode_is_dead+0x35/0xb0
[<ffffffff81562d43>] mutex_lock_nested+0x63/0x420
[<ffffffff8112f1b5>] ? inotify_inode_is_dead+0x35/0xb0
[<ffffffff8112f1b5>] ? inotify_inode_is_dead+0x35/0xb0
[<ffffffff81012fe9>] ? sched_clock+0x9/0x10
[<ffffffff81077165>] ? lock_release_holdtime+0x35/0x1c0
[<ffffffff8112f1b5>] inotify_inode_is_dead+0x35/0xb0
[<ffffffff8110c9dc>] dentry_iput+0xbc/0xe0
[<ffffffff8110cb23>] d_kill+0x33/0x60
[<ffffffff8110ce23>] __shrink_dcache_sb+0x2d3/0x350
[<ffffffff8110cffa>] shrink_dcache_memory+0x15a/0x1e0
[<ffffffff810d0cc5>] shrink_slab+0x125/0x180
[<ffffffff810d1540>] kswapd+0x560/0x7a0
[<ffffffff810ce160>] ? isolate_pages_global+0x0/0x2c0
[<ffffffff81065a30>] ? autoremove_wake_function+0x0/0x40
[<ffffffff8107953d>] ? trace_hardirqs_on+0xd/0x10
[<ffffffff810d0fe0>] ? kswapd+0x0/0x7a0
[<ffffffff8106555b>] kthread+0x5b/0xa0
[<ffffffff8100d40a>] child_rip+0xa/0x20
[<ffffffff8100cdd0>] ? restore_args+0x0/0x30
[<ffffffff81065500>] ? kthread+0x0/0xa0
[<ffffffff8100d400>] ? child_rip+0x0/0x20
[eparis@redhat.com: fix audit too]
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To be on the safe side, it should be less fragile to exclude I_NEW inodes
from inode list scans by default (unless there is an important reason to
have them).
Normally they will get excluded (eg. by zero refcount or writecount etc),
however it is a bit fragile for list walkers to know exactly what parts of
the inode state is set up and valid to test when in I_NEW. So along these
lines, move I_NEW checks upward as well (sometimes taking I_FREEING etc
checks with them too -- this shouldn't be a problem should it?)
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If userspace supplies an invalid pointer to a read() of an inotify
instance, the inotify device's event list mutex is unlocked twice.
This causes an unbalance which effectively leaves the data structure
unprotected, and we can trigger oopses by accessing the inotify
instance from different tasks concurrently.
The best fix (contributed largely by Linus) is a total rewrite
of the function in question:
On Thu, Jan 22, 2009 at 7:05 AM, Linus Torvalds wrote:
> The thing to notice is that:
>
> - locking is done in just one place, and there is no question about it
> not having an unlock.
>
> - that whole double-while(1)-loop thing is gone.
>
> - use multiple functions to make nesting and error handling sane
>
> - do error testing after doing the things you always need to do, ie do
> this:
>
> mutex_lock(..)
> ret = function_call();
> mutex_unlock(..)
>
> .. test ret here ..
>
> instead of doing conditional exits with unlocking or freeing.
>
> So if the code is written in this way, it may still be buggy, but at least
> it's not buggy because of subtle "forgot to unlock" or "forgot to free"
> issues.
>
> This _always_ unlocks if it locked, and it always frees if it got a
> non-error kevent.
Cc: John McCutchan <ttb@tentacle.dhs.org>
Cc: Robert Love <rlove@google.com>
Cc: <stable@kernel.org>
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The problems lie in the types used for some inotify interfaces, both at the kernel level and at the glibc level. This mail addresses the kernel problem. I will follow up with some suggestions for glibc changes.
For the sys_inotify_rm_watch() interface, the type of the 'wd' argument is
currently 'u32', it should be '__s32' . That is Robert's suggestion, and
is consistent with the other declarations of watch descriptors in the
kernel source, in particular, the inotify_event structure in
include/linux/inotify.h:
struct inotify_event {
__s32 wd; /* watch descriptor */
__u32 mask; /* watch mask */
__u32 cookie; /* cookie to synchronize two events */
__u32 len; /* length (including nulls) of name */
char name[0]; /* stub for possible name */
};
The patch makes the changes needed for inotify_rm_watch().
Signed-off-by: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: Robert Love <rlove@google.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Creating a generic filesystem notification interface, fsnotify, which will be
used by inotify, dnotify, and eventually fanotify is really starting to
clutter the fs directory. This patch simply moves inotify and dnotify into
fs/notify/inotify and fs/notify/dnotify respectively to make both current fs/
and future notification tidier.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Andreas Gruenbacher