Commit Graph

9041 Commits

Author SHA1 Message Date
Alexander A. Klimov ed757328c3 atm: Replace HTTP links with HTTPS ones
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-13 17:01:44 -07:00
David S. Miller 71930d6102 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
All conflicts seemed rather trivial, with some guidance from
Saeed Mameed on the tc_ct.c one.

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-11 00:46:00 -07:00
Linus Torvalds 5a764898af Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller:

 1) Restore previous behavior of CAP_SYS_ADMIN wrt loading networking
    BPF programs, from Maciej Żenczykowski.

 2) Fix dropped broadcasts in mac80211 code, from Seevalamuthu
    Mariappan.

 3) Slay memory leak in nl80211 bss color attribute parsing code, from
    Luca Coelho.

 4) Get route from skb properly in ip_route_use_hint(), from Miaohe Lin.

 5) Don't allow anything other than ARPHRD_ETHER in llc code, from Eric
    Dumazet.

 6) xsk code dips too deeply into DMA mapping implementation internals.
    Add dma_need_sync and use it. From Christoph Hellwig

 7) Enforce power-of-2 for BPF ringbuf sizes. From Andrii Nakryiko.

 8) Check for disallowed attributes when loading flow dissector BPF
    programs. From Lorenz Bauer.

 9) Correct packet injection to L3 tunnel devices via AF_PACKET, from
    Jason A. Donenfeld.

10) Don't advertise checksum offload on ipa devices that don't support
    it. From Alex Elder.

11) Resolve several issues in TCP MD5 signature support. Missing memory
    barriers, bogus options emitted when using syncookies, and failure
    to allow md5 key changes in established states. All from Eric
    Dumazet.

12) Fix interface leak in hsr code, from Taehee Yoo.

13) VF reset fixes in hns3 driver, from Huazhong Tan.

14) Make loopback work again with ipv6 anycast, from David Ahern.

15) Fix TX starvation under high load in fec driver, from Tobias
    Waldekranz.

16) MLD2 payload lengths not checked properly in bridge multicast code,
    from Linus Lüssing.

17) Packet scheduler code that wants to find the inner protocol
    currently only works for one level of VLAN encapsulation. Allow
    Q-in-Q situations to work properly here, from Toke
    Høiland-Jørgensen.

18) Fix route leak in l2tp, from Xin Long.

19) Resolve conflict between the sk->sk_user_data usage of bpf reuseport
    support and various protocols. From Martin KaFai Lau.

20) Fix socket cgroup v2 reference counting in some situations, from
    Cong Wang.

21) Cure memory leak in mlx5 connection tracking offload support, from
    Eli Britstein.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits)
  mlxsw: pci: Fix use-after-free in case of failed devlink reload
  mlxsw: spectrum_router: Remove inappropriate usage of WARN_ON()
  net: macb: fix call to pm_runtime in the suspend/resume functions
  net: macb: fix macb_suspend() by removing call to netif_carrier_off()
  net: macb: fix macb_get/set_wol() when moving to phylink
  net: macb: mark device wake capable when "magic-packet" property present
  net: macb: fix wakeup test in runtime suspend/resume routines
  bnxt_en: fix NULL dereference in case SR-IOV configuration fails
  libbpf: Fix libbpf hashmap on (I)LP32 architectures
  net/mlx5e: CT: Fix memory leak in cleanup
  net/mlx5e: Fix port buffers cell size value
  net/mlx5e: Fix 50G per lane indication
  net/mlx5e: Fix CPU mapping after function reload to avoid aRFS RX crash
  net/mlx5e: Fix VXLAN configuration restore after function reload
  net/mlx5e: Fix usage of rcu-protected pointer
  net/mxl5e: Verify that rpriv is not NULL
  net/mlx5: E-Switch, Fix vlan or qos setting in legacy mode
  net/mlx5: Fix eeprom support for SFP module
  cgroup: Fix sock_cgroup_data on big-endian.
  selftests: bpf: Fix detach from sockmap tests
  ...
2020-07-10 18:16:22 -07:00
Jakub Kicinski c7d759eb7b ethtool: add tunnel info interface
Add an interface to report offloaded UDP ports via ethtool netlink.

Now that core takes care of tracking which UDP tunnel ports the NICs
are aware of we can quite easily export this information out to
user space.

The responsibility of writing the netlink dumps is split between
ethtool code and udp_tunnel_nic.c - since udp_tunnel module may
not always be loaded, yet we should always report the capabilities
of the NIC.

$ ethtool --show-tunnels eth0
Tunnel information for eth0:
  UDP port table 0:
    Size: 4
    Types: vxlan
    No entries
  UDP port table 1:
    Size: 4
    Types: geneve, vxlan-gpe
    Entries (1):
        port 1230, vxlan-gpe

v4:
 - back to v2, build fix is now directly in udp_tunnel.h
v3:
 - don't compile ETHTOOL_MSG_TUNNEL_INFO_GET in if CONFIG_INET
   not set.
v2:
 - fix string set count,
 - reorder enums in the uAPI,
 - fix type of ETHTOOL_A_TUNNEL_UDP_TABLE_TYPES to bitset
   in docs and comments.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-10 13:54:00 -07:00
Linus Torvalds a581387e41 io_uring-5.8-2020-07-10
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl8IkFIQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgph7tEACdkJ9CupSjVQBJ35/2wBiUCU6lh0iUbru3
 oURuw9AdjzT75en68LOyrhfdGCkNX8xrIoHnh9pGukoPid//R3rAsk+5j4Doc7SY
 FBZuH7HbOC/gdTAzSd0tLyaddmf06eq0PPmlWQGUYu29Vy49nvLDM2V+455OgkT9
 csCNk/Fq/np7IKVZW56KZ1Iz90Dtp8BVwFJeFdzFK5cpCjKXTyvzS/5GEFqz0rc3
 AwvxkBCpDjXQqh5OOs2qM18QUeJAQV0PX1x+XjtASMB3dr4W8D5KDEhaQwiXiGOT
 j7yHX/JThtOYI41IiKpF/LP9EQAkavIT1n7ZjXwablq6ecQjj24DxCe0h1uwnKyW
 G5Hztjcb2YMhhDVj4q6m/uzD13+ccIeEmVoKjRuGj+0YDFETIBYK8U4GElu7VUIr
 yUKqy7jFEHKFZj5eQz5JDl08+zq/ocZHJctqZhCB3DWMbE5f+VCzNGEqGGs2IiRS
 J7/S8jB1j7Te8jFXBN3uaNpuj+U/JlYCPqO83fxF14ar3wZ1mblML4cw0sXUJazO
 1YI3LU91qBeCNK/9xUc43MzzG/SgdIKJjfoaYYPBPMG5SzVYAtRoUUiNf942UE1k
 7u8/leql+RqwSLedjU/AQqzs29p7wcK8nzFBApmTfiiBHYcRbJ6Fxp3/UwTOR3tQ
 kwmkUtivtQ==
 =31iz
 -----END PGP SIGNATURE-----

Merge tag 'io_uring-5.8-2020-07-10' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:

 - Fix memleak for error path in registered files (Yang)

 - Export CQ overflow state in flags, necessary to fix a case where
   liburing doesn't know if it needs to enter the kernel (Xiaoguang)

 - Fix for a regression in when user memory is accounted freed, causing
   issues with back-to-back ring exit + init if the ulimit -l setting is
   very tight.

* tag 'io_uring-5.8-2020-07-10' of git://git.kernel.dk/linux-block:
  io_uring: account user memory freed when exit has been queued
  io_uring: fix memleak in io_sqe_files_register()
  io_uring: fix memleak in __io_sqe_files_update()
  io_uring: export cq overflow status to userspace
2020-07-10 09:57:57 -07:00
Danielle Ratson a0f49b5486 devlink: Add a new devlink port split ability attribute and pass to netlink
Add a new attribute that indicates the split ability of devlink port.

Drivers are expected to set it via devlink_port_attrs_set(), before
registering the port.

Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09 13:15:30 -07:00
Danielle Ratson a21cf0a833 devlink: Add a new devlink port lanes attribute and pass to netlink
Add a new devlink port attribute that indicates the port's number of lanes.

Drivers are expected to set it via devlink_port_attrs_set(), before
registering the port.

The attribute is not passed to user space in case the number of lanes is
invalid (0).

Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09 13:15:29 -07:00
Paolo Abeni ac3b45f609 mptcp: add MPTCP socket diag interface
exposes basic inet socket attribute, plus some MPTCP socket
fields comprising PM status and MPTCP-level sequence numbers.

Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09 12:38:41 -07:00
Paolo Abeni 3f935c75eb inet_diag: support for wider protocol numbers
After commit bf9765145b ("sock: Make sk_protocol a 16-bit value")
the current size of 'sdiag_protocol' is not sufficient to represent
the possible protocol values.

This change introduces a new inet diag request attribute to let
user space specify the relevant protocol number using u32 values.

The attribute is parsed by inet diag core on get/dump command
and the extended protocol value, if available, is preferred to
'sdiag_protocol' to lookup the diag handler.

The parse attributed are exposed to all the diag handlers via
the cb->data.

Note that inet_diag_dump_one_icsk() is left unmodified, as it
will not be used by protocol using the extended attribute.

Suggested-by: David S. Miller <davem@davemloft.net>
Co-developed-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09 12:38:41 -07:00
Xiaoguang Wang 6d5f904904 io_uring: export cq overflow status to userspace
For those applications which are not willing to use io_uring_enter()
to reap and handle cqes, they may completely rely on liburing's
io_uring_peek_cqe(), but if cq ring has overflowed, currently because
io_uring_peek_cqe() is not aware of this overflow, it won't enter
kernel to flush cqes, below test program can reveal this bug:

static void test_cq_overflow(struct io_uring *ring)
{
        struct io_uring_cqe *cqe;
        struct io_uring_sqe *sqe;
        int issued = 0;
        int ret = 0;

        do {
                sqe = io_uring_get_sqe(ring);
                if (!sqe) {
                        fprintf(stderr, "get sqe failed\n");
                        break;;
                }
                ret = io_uring_submit(ring);
                if (ret <= 0) {
                        if (ret != -EBUSY)
                                fprintf(stderr, "sqe submit failed: %d\n", ret);
                        break;
                }
                issued++;
        } while (ret > 0);
        assert(ret == -EBUSY);

        printf("issued requests: %d\n", issued);

        while (issued) {
                ret = io_uring_peek_cqe(ring, &cqe);
                if (ret) {
                        if (ret != -EAGAIN) {
                                fprintf(stderr, "peek completion failed: %s\n",
                                        strerror(ret));
                                break;
                        }
                        printf("left requets: %d\n", issued);
                        continue;
                }
                io_uring_cqe_seen(ring, cqe);
                issued--;
                printf("left requets: %d\n", issued);
        }
}

int main(int argc, char *argv[])
{
        int ret;
        struct io_uring ring;

        ret = io_uring_queue_init(16, &ring, 0);
        if (ret) {
                fprintf(stderr, "ring setup failed: %d\n", ret);
                return 1;
        }

        test_cq_overflow(&ring);
        return 0;
}

To fix this issue, export cq overflow status to userspace by adding new
IORING_SQ_CQ_OVERFLOW flag, then helper functions() in liburing, such as
io_uring_peek_cqe, can be aware of this cq overflow and do flush accordingly.

Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-08 19:17:06 -06:00
Meir Lichtinger 065e0d42a0 ethtool: Add support for 100Gbps per lane link modes
Define 100G, 200G and 400G link modes using 100Gbps per lane

LR, ER and FR are defined as a single link mode because they are
using same technology and by design are fully interoperable.
EEPROM content indicates if the module is LR, ER, or FR, and the
user space ethtool decoder is planned to support decoding these
modes in the EEPROM.

Signed-off-by: Meir Lichtinger <meirl@mellanox.com>
CC: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08 15:30:42 -07:00
David S. Miller e80a07b244 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:

====================
Netfilter/IPVS updates for net-next

The following patchset contains Netfilter updates for net-next:

1) Support for rejecting packets from the prerouting chain, from
   Laura Garcia Liebana.

2) Remove useless assignment in pipapo, from Stefano Brivio.

3) On demand hook registration in IPVS, from Julian Anastasov.

4) Expire IPVS connection from process context to not overload
   timers, also from Julian.

5) Fallback to conntrack TCP tracker to handle connection reuse
   in IPVS, from Julian Anastasov.

6) Several patches to support for chain bindings.

7) Expose enum nft_chain_flags through UAPI.

8) Reject unsupported chain flags from the netlink control plane.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08 12:42:40 -07:00
David S. Miller f91c031e65 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:

====================
pull-request: bpf-next 2020-07-04

The following pull-request contains BPF updates for your *net-next* tree.

We've added 73 non-merge commits during the last 17 day(s) which contain
a total of 106 files changed, 5233 insertions(+), 1283 deletions(-).

The main changes are:

1) bpftool ability to show PIDs of processes having open file descriptors
   for BPF map/program/link/BTF objects, relying on BPF iterator progs
   to extract this info efficiently, from Andrii Nakryiko.

2) Addition of BPF iterator progs for dumping TCP and UDP sockets to
   seq_files, from Yonghong Song.

3) Support access to BPF map fields in struct bpf_map from programs
   through BTF struct access, from Andrey Ignatov.

4) Add a bpf_get_task_stack() helper to be able to dump /proc/*/stack
   via seq_file from BPF iterator progs, from Song Liu.

5) Make SO_KEEPALIVE and related options available to bpf_setsockopt()
   helper, from Dmitry Yakunin.

6) Optimize BPF sk_storage selection of its caching index, from Martin
   KaFai Lau.

7) Removal of redundant synchronize_rcu()s from BPF map destruction which
   has been a historic leftover, from Alexei Starovoitov.

8) Several improvements to test_progs to make it easier to create a shell
   loop that invokes each test individually which is useful for some CIs,
   from Jesper Dangaard Brouer.

9) Fix bpftool prog dump segfault when compiled without skeleton code on
   older clang versions, from John Fastabend.

10) Bunch of cleanups and minor improvements, from various others.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-04 17:48:34 -07:00
Pablo Neira Ayuso c1f79a2eef netfilter: nf_tables: reject unsupported chain flags
Bail out if userspace sends unsupported chain flags.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-07-04 02:51:28 +02:00
Pablo Neira Ayuso d0e2c7de92 netfilter: nf_tables: add NFT_CHAIN_BINDING
This new chain flag specifies that:

* the kernel dynamically allocates the chain name, if no chain name
  is specified.

* If the immediate expression that refers to this chain is removed,
  then this bound chain (and its content) is destroyed.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-07-04 01:22:14 +02:00
Pablo Neira Ayuso 67c49de4ad netfilter: nf_tables: expose enum nft_chain_flags through UAPI
This enum definition was never exposed through UAPI. Rename
NFT_BASE_CHAIN to NFT_CHAIN_BASE for consistency.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-07-04 01:18:41 +02:00
Pablo Neira Ayuso 51d70f181f netfilter: nf_tables: add NFTA_VERDICT_CHAIN_ID attribute
This netlink attribute allows you to identify the chain to jump/goto by
means of the chain ID.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-07-04 01:18:41 +02:00
Pablo Neira Ayuso 837830a4b4 netfilter: nf_tables: add NFTA_RULE_CHAIN_ID attribute
This new netlink attribute allows you to add rules to chains by the
chain ID.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-07-04 01:18:41 +02:00
Pablo Neira Ayuso 74cccc3d38 netfilter: nf_tables: add NFTA_CHAIN_ID attribute
This netlink attribute allows you to refer to chains inside a
transaction as an alternative to the name and the handle. The chain
binding support requires this new chain ID approach.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-07-04 01:18:41 +02:00
Horatiu Vultur 36a8e8e265 bridge: Extend br_fill_ifinfo to return MPR status
This patch extends the function br_fill_ifinfo to return also the MRP
status for each instance on a bridge. It also adds a new filter
RTEXT_FILTER_MRP to return the MRP status only when this is set, not to
interfer with the vlans. The MRP status is return only on the bridge
interfaces.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02 14:19:15 -07:00
Horatiu Vultur e4266b991f bridge: uapi: mrp: Extend MRP attributes to get the status
Add MRP attribute IFLA_BRIDGE_MRP_INFO to allow the userspace to get the
current state of the MRP instances. This is a nested attribute that
contains other attributes like, ring id, index of primary and secondary
port, priority, ring state, ring role.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02 14:19:15 -07:00
Song Liu fa28dcb82a bpf: Introduce helper bpf_get_task_stack()
Introduce helper bpf_get_task_stack(), which dumps stack trace of given
task. This is different to bpf_get_stack(), which gets stack track of
current task. One potential use case of bpf_get_task_stack() is to call
it from bpf_iter__task and dump all /proc/<pid>/stack to a seq_file.

bpf_get_task_stack() uses stack_trace_save_tsk() instead of
get_perf_callchain() for kernel stack. The benefit of this choice is that
stack_trace_save_tsk() doesn't require changes in arch/. The downside of
using stack_trace_save_tsk() is that stack_trace_save_tsk() dumps the
stack trace to unsigned long array. For 32-bit systems, we need to
translate it to u64 array.

Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200630062846.664389-3-songliubraving@fb.com
2020-07-01 08:23:19 -07:00
David S. Miller e708e2bd55 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2020-06-30

The following pull-request contains BPF updates for your *net* tree.

We've added 28 non-merge commits during the last 9 day(s) which contain
a total of 35 files changed, 486 insertions(+), 232 deletions(-).

The main changes are:

1) Fix an incorrect verifier branch elimination for PTR_TO_BTF_ID pointer
   types, from Yonghong Song.

2) Fix UAPI for sockmap and flow_dissector progs that were ignoring various
   arguments passed to BPF_PROG_{ATTACH,DETACH}, from Lorenz Bauer & Jakub Sitnicki.

3) Fix broken AF_XDP DMA hacks that are poking into dma-direct and swiotlb
   internals and integrate it properly into DMA core, from Christoph Hellwig.

4) Fix RCU splat from recent changes to avoid skipping ingress policy when
   kTLS is enabled, from John Fastabend.

5) Fix BPF ringbuf map to enforce size to be the power of 2 in order for its
   position masking to work, from Andrii Nakryiko.

6) Fix regression from CAP_BPF work to re-allow CAP_SYS_ADMIN for loading
   of network programs, from Maciej Żenczykowski.

7) Fix libbpf section name prefix for devmap progs, from Jesper Dangaard Brouer.

8) Fix formatting in UAPI documentation for BPF helpers, from Quentin Monnet.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-30 14:20:45 -07:00
David S. Miller d9b8b9845f This feature/cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
 
  - update mailing list URL, by Sven Eckelmann
 
  - fix typos and grammar in documentation, by Sven Eckelmann
 
  - introduce a configurable per interface hop penalty,
    by Linus Luessing
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCgA0FiEE1ilQI7G+y+fdhnrfoSvjmEKSnqEFAl769w8WHHN3QHNpbW9u
 d3VuZGVybGljaC5kZQAKCRChK+OYQpKeoatoEACN9O+fCwDIlIdxw/bUlGFw1J+V
 4rDReo5grIkl3BSdnLkkaPXTcazCWRoFhCdH6esTsF4/R/nwUa5AZuAbVd2NnCFU
 H+hVc7q/w0Hqppx5APT0AghgLcp8mFuHV9jqtJOjv9Kvd05Il6XwGkALT8QX2e2P
 ypMD+PBuQT1XCMl0v02lA0ki2TxvCtFYs1UznbAdl86GOGMua3t6fuRWQ2fpUMou
 t9251NnwSvSyeYuI8Zws7Wza2S4FOilX/CAjjGi02D0xf7T/JDs3FiPd6obdNfe/
 4j6R2dHWjxz1sb6bEdM3wfmUlU4StMQ+Vywpu1fh3gihLc2tmtMZhn6tJk3YjALt
 zlwDO2p/si7FLrizfMS7mUesZJH7Ji79BZtZWXsdW3p1zU1jlfJh5dc2ZaKwL9qk
 MSpd9DH2F459YC6ELcITLnhCymc7O/g3n3voNnSxi7uX4M5LsGt0mcx6g/iiFN16
 nPNHzXo7WJjgRcmLEQ3kYeD7Kjqh5XEogKLnwhThBxCFIQkNFF3OYqWtJyj5Sg5o
 +EredOAcq1Rc5CR//V43rQZLk4o1I9qQysKFqbjHohMIgLccz+47QAeBXrhku0ZT
 XU6k09Q0pkuo3iVPYnIUTDUkHtvFtsCKR98+8tB5xDR5F155OpFg7AXaKIx5Iym8
 4/eGrx22T+6TIeSGGg==
 =ceu6
 -----END PGP SIGNATURE-----

Merge tag 'batadv-next-for-davem-20200630' of git://git.open-mesh.org/linux-merge

Simon Wunderlich says:

====================
This feature/cleanup patchset includes the following patches:

 - bump version strings, by Simon Wunderlich

 - update mailing list URL, by Sven Eckelmann

 - fix typos and grammar in documentation, by Sven Eckelmann

 - introduce a configurable per interface hop penalty,
   by Linus Luessing
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-30 12:59:15 -07:00
Amit Cohen ecc31c6024 ethtool: Add link extended state
Currently, drivers can only tell whether the link is up/down using
LINKSTATE_GET, but no additional information is given.

Add attributes to LINKSTATE_GET command in order to allow drivers
to expose the user more information in addition to link state to ease
the debug process, for example, reason for link down state.

Extended state consists of two attributes - link_ext_state and
link_ext_substate. The idea is to avoid 'vendor specific' states in order
to prevent drivers to use specific link_ext_state that can be in the future
common link_ext_state.

The substates allows drivers to add more information to the common
link_ext_state. For example, vendor can expose 'Autoneg' as link_ext_state
and add 'No partner detected during force mode' as link_ext_substate.

If a driver cannot pinpoint the extended state with the substate
accuracy, it is free to expose only the extended state and omit the
substate attribute.

Signed-off-by: Amit Cohen <amitc@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-29 17:45:02 -07:00
Petr Machata aee9caa03f net: sched: sch_red: Add qevents "early_drop" and "mark"
In order to allow acting on dropped and/or ECN-marked packets, add two new
qevents to the RED qdisc: "early_drop" and "mark". Filters attached at
"early_drop" block are executed as packets are early-dropped, those
attached at the "mark" block are executed as packets are ECN-marked.

Two new attributes are introduced: TCA_RED_EARLY_DROP_BLOCK with the block
index for the "early_drop" qevent, and TCA_RED_MARK_BLOCK for the "mark"
qevent. Absence of these attributes signifies "don't care": no block is
allocated in that case, or the existing blocks are left intact in case of
the change callback.

For purposes of offloading, blocks attached to these qevents appear with
newly-introduced binder types, FLOW_BLOCK_BINDER_TYPE_RED_EARLY_DROP and
FLOW_BLOCK_BINDER_TYPE_RED_MARK.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-29 17:08:28 -07:00
Martin fe80536acf bareudp: Added attribute to enable & disable rx metadata collection
Metadata need not be collected in receive if the packet from bareudp
device is not targeted to openvswitch.

Signed-off-by: Martin <martin.varghese@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-28 20:48:20 -07:00
Linus Torvalds c322f5399f VFIO fixes for v5.8-rc3
- Fix double free of eventfd ctx (Alex Williamson)
 
  - Fix duplicate use of capability ID (Alex Williamson)
 
  - Fix SR-IOV VF memory enable handling (Alex Williamson)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJe91WIAAoJECObm247sIsiYxUP+wSMBfCKLaI/DWnfylBFGWXP
 2RKFhPYHBr7PYu3PS35UUK5mddpCAxjXjjrmSFy7VLbwGv1pBQylCqVdYO+z/P83
 x4ciasUxIN96Y14IBctZ18XCcv5KKsEjoyQYxtpdnShmMMBrLfmM6kqQmsEmYlod
 VkLYYJx2GcX+hz7ThZxh0FcemBv8I6kdkxAX5/xM7X07vu3xpA/Z5qbjREfNaNWS
 PSmBuneEB+4JVeJoyOffIwCC7wtPL2gNCdS3AeIWLHrLTUb3JK+cPxYaqzj3nfHg
 FipOcoN5q0R4Wc1sZRmvkn9cBE2qLDPwwdtNL8NApZpsOeA05/QwyEe/X/0wNqaF
 rqhjnQYTQ6I6yqmg7APiO7vTz7YAsplJtWoxSmsT2oLPn93ObCeDunDn/pBYuRWF
 tdc5G74ewOA/ee1jJqsMx9xK8U0I+pQQ9ig/opROEutV1qmG57/13tusAaSvNGy4
 OjFYx4LcR0zGjSF7YKFXs5EVPLt4EYLb4xnNKqunedlNvtjItuEhonSs8rpMKvK/
 MC/Aa3xA3RtbDOhnAH20PRYuGFzExUWosUVXdDfdViVZ+S6L2ZGfVocJUm6fF/WY
 zxDLQC9OaenXhHNop2egRqbZTTvvzI3O78sFGhDhBLdJa/gQbDh9Asy9n/0+BpX2
 TyW8LMfNzi70bX1LG64p
 =kuUL
 -----END PGP SIGNATURE-----

Merge tag 'vfio-v5.8-rc3' of git://github.com/awilliam/linux-vfio

Pull VFIO fixes from Alex Williamson:

 - Fix double free of eventfd ctx (Alex Williamson)

 - Fix duplicate use of capability ID (Alex Williamson)

 - Fix SR-IOV VF memory enable handling (Alex Williamson)

* tag 'vfio-v5.8-rc3' of git://github.com/awilliam/linux-vfio:
  vfio/pci: Fix SR-IOV VF handling with MMIO blocking
  vfio/type1: Fix migration info capability ID
  vfio/pci: Clear error and request eventfd ctx after releasing
2020-06-27 15:17:21 -07:00
Linus Torvalds 6a6c9b220a drm fixes for v5.8-rc3
core:
 - fix VT registration regression
 
 ttm:
 - fix two fence leaks
 
 amdgpu:
 - Fix missed mutex unlock in DC error path
 - Fix firmware leak for sdma5
 - DC bpc property fixes
 
 amdkfd:
 - Fix memleak in an error path
 
 radeon:
 - Fix copy paste typo in NI DPM spll validation
 
 rcar-du:
 - build fix
 
 tegra:
 - add missing zpos property
 - child driver registeration fix
 - debugfs cleanup fix
 - doc fix
 
 mcde:
 - reorder fbdev setup
 
 panel:
 - fix connector type
 - fix orienation for some panels
 
 sun4i:
 - fix dma/iommu configuration
 
 uvesafb:
 - respect blank flag
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJe9XhdAAoJEAx081l5xIa+9xEP/0xKWygNTFenNgr3cBTta882
 OrUXn4T3Kss4ZPsax6UnPUXEMnBs5/+98S2QKc1EHK7EBHBtZ2EKJqz/xSkeYaOK
 RecM0zCjJfr5ujQwUlCN7EoGbNYhBUfJWLCvvsO5/DaOf7m1p2gwoa9ElXkDB3/v
 r8zoWbkyAcWfTJrZmzJU8/h/ilVat19Z2PRpRA5lkne/dPLVJ36zF/Yi+yXZuVXN
 knU7f0fVa7u+xBxm0xMtKAD02HmLoIOnCkNj2X7vUbkxGcJK2OcRoUDk2rWel4Km
 IZkkzLKPwtEkvyD7sZNPU7EsJWKX2Kmy0PYYWRIKTwOV3JhgtOZkj2D5zbXAGzBr
 bE+tyJS0bhwuG87IeEaensZ2vM+hFzAa7tFaYNm2lYJnuJyLvYbFwABlGkTJ91VI
 ivciHzUga4yW20iSW+0udiL4ADOvgVLVtlu4GlspGUssWI6mWg7U9wu6WyX8zPE6
 j+cpMR4+x9KpmV92opU7BTiENE0Rn4AeKagOM54/th7R02TElHcKvgSnaE+JAPVz
 9B7VNWDBoPoEqPmeNWzsseNp850RMVylb/f1js3rVtjigfsrJyVIFZhdkJ0H33Iq
 4ZlOeX6wc4vvcx0OgNq7Gxt1zn1XRQqTLV+OSi4cmrABYhqNfpaInABIJi9AnZhg
 6B1xvnZ0lmSSmyWuFkP+
 =boAF
 -----END PGP SIGNATURE-----

Merge tag 'drm-fixes-2020-06-26' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "Usual rc3 pickup, lots of little fixes all over.

  The core VT registration regression fix is probably the largest,
  otherwise ttm, amdgpu and tegra are the bulk, with some minor driver
  fixes.

  No i915 pull this week which may or may not mean I get 2x of it next
  week, we'll see how it goes.

  core:
   - fix VT registration regression

  ttm:
   - fix two fence leaks

  amdgpu:
   - Fix missed mutex unlock in DC error path
   - Fix firmware leak for sdma5
   - DC bpc property fixes

  amdkfd:
   - Fix memleak in an error path

  radeon:
   - Fix copy paste typo in NI DPM spll validation

  rcar-du:
   - build fix

  tegra:
   - add missing zpos property
   - child driver registeration fix
   - debugfs cleanup fix
   - doc fix

  mcde:
   - reorder fbdev setup

  panel:
   - fix connector type
   - fix orienation for some panels

  sun4i:
   - fix dma/iommu configuration

  uvesafb:
   - respect blank flag"

* tag 'drm-fixes-2020-06-26' of git://anongit.freedesktop.org/drm/drm: (25 commits)
  drm/amd: fix potential memleak in err branch
  drm/amd/display: Fix ineffective setting of max bpc property
  drm/amd/display: Enable output_bpc property on all outputs
  drm/amdgpu: add fw release for sdma v5_0
  drm/fb-helper: Fix vt restore
  drm/radeon: fix fb_div check in ni_init_smc_spll_table()
  drm/amdgpu/display: Unlock mutex on error
  drm/sun4i: mixer: Call of_dma_configure if there's an IOMMU
  drm: panel-orientation-quirks: Use generic orientation-data for Acer S1003
  drm: panel-orientation-quirks: Add quirk for Asus T101HA panel
  video: fbdev: uvesafb: fix "noblank" option handling
  drm/panel-simple: fix connector type for newhaven_nhd_43_480272ef_atxl
  drm/panel-simple: fix connector type for LogicPD Type28 Display
  drm: rcar-du: Fix build error
  drm: mcde: Fix forgotten user of drm->dev_private
  drm: mcde: Fix display initialization problem
  drm/tegra: Add zpos property for cursor planes
  gpu: host1x: Detach driver on unregister
  gpu: host1x: Correct trivial kernel-doc inconsistencies
  drm/tegra: hub: Register child devices
  ...
2020-06-26 12:27:25 -07:00
Linus Lüssing 3bda14d09d batman-adv: Introduce a configurable per interface hop penalty
In some setups multiple hard interfaces with similar link qualities
or throughput values are available. But people have expressed the desire
to consider one of them as a backup only.

Some creative solutions are currently in use: Such people are
configuring multiple batman-adv mesh/soft interfaces, wire them
together with some veth pairs and then tune the hop penalty to achieve
an effect similar to a tunable per interface hop penalty.

This patch introduces a new, configurable, per hard interface hop penalty
to simplify such setups.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-06-26 10:37:11 +02:00
Sven Eckelmann bccb48c89f batman-adv: Fix typos and grammar in documentation
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-06-26 10:36:30 +02:00
Dave Airlie 687a0ed337 Short summary of fixes pull (less than what git shortlog provides):
* In mcde, set up fbdev after device registration and removde the last access
 to dev->dev_private. Fixes an error message and a segmentation fault.
 
  * Set the connector type for LogicPT Type 28 and newhaven_nhd_43_480272ef_atxl
 panels.
 
  * In uvesafb, fix the handling of the noblank option.
 
  * Fix panel orientation for Asus T101HA and Acer S1003.
 
  * Fix DMA configuration for sun4i if IOMMU is present.
 
  * Fix regression in VT restoration. Unbreaks userspace (i.e., Xorg) VT handling.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAl70X3MACgkQaA3BHVML
 eiPP+ggAnquBWHn4QYVrw4tlcI8supVJurQflcYYYBzPksiijheJAE+74nfCWwTB
 aijbyiPSp6tq8aP2NQpasW3pQdo0gQ2I9CwYzCxPTDk3X0iSxGEIToDieBTonmKn
 UrvUZCQ5L775XJASus2gH4/b34Y0zIrQfCLj1ECOOSNjUWvTLntWrbJDl8S9SISh
 teIAFZ1qAlcrTTNuAZ1lp+e+AlXEXKhi8+CqY0ltiV1q4JtO1SdOMnb5y0rxsYOy
 H/KVWbZWdWkgIrZpJ1v/+jio0Mkh0jDi1ldJ6UDxWAv5viQnExICUY1d88Qw2xVo
 73w4iJ/ujNIK3kDZQmvLMlVTjc1oSw==
 =GRqS
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-fixes-2020-06-25' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

Short summary of fixes pull (less than what git shortlog provides):

 * In mcde, set up fbdev after device registration and removde the last access
to dev->dev_private. Fixes an error message and a segmentation fault.

 * Set the connector type for LogicPT Type 28 and newhaven_nhd_43_480272ef_atxl
panels.

 * In uvesafb, fix the handling of the noblank option.

 * Fix panel orientation for Asus T101HA and Acer S1003.

 * Fix DMA configuration for sun4i if IOMMU is present.

 * Fix regression in VT restoration. Unbreaks userspace (i.e., Xorg) VT handling.

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200625082717.GA14856@linux-uq9g
2020-06-26 13:49:17 +10:00
David S. Miller 7bed145516 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Minor overlapping changes in xfrm_device.c, between the double
ESP trailing bug fix setting the XFRM_INIT flag and the changes
in net-next preparing for bonding encryption support.

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-25 19:29:51 -07:00
Linus Torvalds 4a21185cda Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller:

 1) Don't insert ESP trailer twice in IPSEC code, from Huy Nguyen.

 2) The default crypto algorithm selection in Kconfig for IPSEC is out
    of touch with modern reality, fix this up. From Eric Biggers.

 3) bpftool is missing an entry for BPF_MAP_TYPE_RINGBUF, from Andrii
    Nakryiko.

 4) Missing init of ->frame_sz in xdp_convert_zc_to_xdp_frame(), from
    Hangbin Liu.

 5) Adjust packet alignment handling in ax88179_178a driver to match
    what the hardware actually does. From Jeremy Kerr.

 6) register_netdevice can leak in the case one of the notifiers fail,
    from Yang Yingliang.

 7) Use after free in ip_tunnel_lookup(), from Taehee Yoo.

 8) VLAN checks in sja1105 DSA driver need adjustments, from Vladimir
    Oltean.

 9) tg3 driver can sleep forever when we get enough EEH errors, fix from
    David Christensen.

10) Missing {READ,WRITE}_ONCE() annotations in various Intel ethernet
    drivers, from Ciara Loftus.

11) Fix scanning loop break condition in of_mdiobus_register(), from
    Florian Fainelli.

12) MTU limit is incorrect in ibmveth driver, from Thomas Falcon.

13) Endianness fix in mlxsw, from Ido Schimmel.

14) Use after free in smsc95xx usbnet driver, from Tuomas Tynkkynen.

15) Missing bridge mrp configuration validation, from Horatiu Vultur.

16) Fix circular netns references in wireguard, from Jason A. Donenfeld.

17) PTP initialization on recovery is not done properly in qed driver,
    from Alexander Lobakin.

18) Endian conversion of L4 ports in filters of cxgb4 driver is wrong,
    from Rahul Lakkireddy.

19) Don't clear bound device TX queue of socket prematurely otherwise we
    get problems with ktls hw offloading, from Tariq Toukan.

20) ipset can do atomics on unaligned memory, fix from Russell King.

21) Align ethernet addresses properly in bridging code, from Thomas
    Martitz.

22) Don't advertise ipv4 addresses on SCTP sockets having ipv6only set,
    from Marcelo Ricardo Leitner.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (149 commits)
  rds: transport module should be auto loaded when transport is set
  sch_cake: fix a few style nits
  sch_cake: don't call diffserv parsing code when it is not needed
  sch_cake: don't try to reallocate or unshare skb unconditionally
  ethtool: fix error handling in linkstate_prepare_data()
  wil6210: account for napi_gro_receive never returning GRO_DROP
  hns: do not cast return value of napi_gro_receive to null
  socionext: account for napi_gro_receive never returning GRO_DROP
  wireguard: receive: account for napi_gro_receive never returning GRO_DROP
  vxlan: fix last fdb index during dump of fdb with nhid
  sctp: Don't advertise IPv4 addresses if ipv6only is set on the socket
  tc-testing: avoid action cookies with odd length.
  bpf: tcp: bpf_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT
  tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT
  net: dsa: sja1105: fix tc-gate schedule with single element
  net: dsa: sja1105: recalculate gating subschedule after deleting tc-gate rules
  net: dsa: sja1105: unconditionally free old gating config
  net: dsa: sja1105: move sja1105_compose_gating_subschedule at the top
  net: macb: free resources on failure path of at91ether_open()
  net: macb: call pm_runtime_put_sync on failure path
  ...
2020-06-25 18:27:40 -07:00
Rao Shoaib 4c342f778f rds: transport module should be auto loaded when transport is set
This enhancement auto loads transport module when the transport
is set via SO_RDS_TRANSPORT socket option.

Reviewed-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Rao Shoaib <rao.shoaib@oracle.com>
Signed-off-by: Somasundaram Krishnasamy <somasundaram.krishnasamy@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-25 16:26:25 -07:00
Yonghong Song 0d4fad3e57 bpf: Add bpf_skc_to_udp6_sock() helper
The helper is used in tracing programs to cast a socket
pointer to a udp6_sock pointer.
The return value could be NULL if the casting is illegal.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/bpf/20200623230815.3988481-1-yhs@fb.com
2020-06-24 18:37:59 -07:00
Yonghong Song 478cfbdf5f bpf: Add bpf_skc_to_{tcp, tcp_timewait, tcp_request}_sock() helpers
Three more helpers are added to cast a sock_common pointer to
an tcp_sock, tcp_timewait_sock or a tcp_request_sock for
tracing programs.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200623230811.3988277-1-yhs@fb.com
2020-06-24 18:37:59 -07:00
Yonghong Song af7ec13833 bpf: Add bpf_skc_to_tcp6_sock() helper
The helper is used in tracing programs to cast a socket
pointer to a tcp6_sock pointer.
The return value could be NULL if the casting is illegal.

A new helper return type RET_PTR_TO_BTF_ID_OR_NULL is added
so the verifier is able to deduce proper return types for the helper.

Different from the previous BTF_ID based helpers,
the bpf_skc_to_tcp6_sock() argument can be several possible
btf_ids. More specifically, all possible socket data structures
with sock_common appearing in the first in the memory layout.
This patch only added socket types related to tcp and udp.

All possible argument btf_id and return value btf_id
for helper bpf_skc_to_tcp6_sock() are pre-calculcated and
cached. In the future, it is even possible to precompute
these btf_id's at kernel build time.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200623230809.3988195-1-yhs@fb.com
2020-06-24 18:37:59 -07:00
Nikolay Aleksandrov b5f1d9ec28 net: bridge: add a flag to avoid refreshing fdb when changing/adding
When we modify or create a new fdb entry sometimes we want to avoid
refreshing its activity in order to track it properly. One example is
when a mac is received from EVPN multi-homing peer by FRR, which doesn't
want to change local activity accounting. It makes it static and sets a
flag to track its activity.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-24 14:36:33 -07:00
Nikolay Aleksandrov 31cbc39b63 net: bridge: add option to allow activity notifications for any fdb entries
This patch adds the ability to notify about activity of any entries
(static, permanent or ext_learn). EVPN multihoming peers need it to
properly and efficiently handle mac sync (peer active/locally active).
We add a new NFEA_ACTIVITY_NOTIFY attribute which is used to dump the
current activity state and to control if static entries should be monitored
at all. We use 2 bits - one to activate fdb entry tracking (disabled by
default) and the second to denote that an entry is inactive. We need
the second bit in order to avoid multiple notifications of inactivity.
Obviously this makes no difference for dynamic entries since at the time
of inactivity they get deleted, while the tracked non-dynamic entries get
the inactive bit set and get a notification.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-24 14:36:33 -07:00
Nikolay Aleksandrov 899426b3bd net: neighbor: add fdb extended attribute
Add an attribute to NDA which will contain all future fdb-specific
attributes in order to avoid polluting the NDA namespace with e.g.
bridge or vxlan specific attributes. The attribute is called
NDA_FDB_EXT_ATTRS and the structure would look like:
 [NDA_FDB_EXT_ATTRS] = {
    [NFEA_xxx]
 }

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-24 14:36:33 -07:00
Daniel Vetter dc5bdb68b5 drm/fb-helper: Fix vt restore
In the past we had a pile of hacks to orchestrate access between fbdev
emulation and native kms clients. We've tried to streamline this, by
always preferring the kms side above fbdev calls when a drm master
exists, because drm master controls access to the display resources.

Unfortunately this breaks existing userspace, specifically Xorg. When
exiting Xorg first restores the console to text mode using the KDSET
ioctl on the vt. This does nothing, because a drm master is still
around. Then it drops the drm master status, which again does nothing,
because logind is keeping additional drm fd open to be able to
orchestrate vt switches. In the past this is the point where fbdev was
restored, as part of the ->lastclose hook on the drm side.

Now to fix this regression we don't want to go back to letting fbdev
restore things whenever it feels like, or to the pile of hacks we've
had before. Instead try and go with a minimal exception to make the
KDSET case work again, and nothing else.

This means that if userspace does a KDSET call when switching between
graphical compositors, there will be some flickering with fbcon
showing up for a bit. But a) that's not a regression and b) userspace
can fix it by improving the vt switching dance - logind should have
all the information it needs.

While pondering all this I'm also wondering wheter we should have a
SWITCH_MASTER ioctl to allow race-free master status handover. But
that's for another day.

v2: Somehow forgot to cc all the fbdev people.

v3: Fix typo Alex spotted.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208179
Cc: shlomo@fastmail.com
Reported-and-Tested-by: shlomo@fastmail.com
Cc: Michel Dänzer <michel@daenzer.net>
Fixes: 64914da24e ("drm/fbdev-helper: don't force restores")
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.7+
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Qiujun Huang <hqjagain@gmail.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200624092910.3280448-1-daniel.vetter@ffwll.ch
2020-06-24 21:34:11 +02:00
Dmitry Yakunin f9bcf96837 bpf: Add SO_KEEPALIVE and related options to bpf_setsockopt
This patch adds support of SO_KEEPALIVE flag and TCP related options
to bpf_setsockopt() routine. This is helpful if we want to enable or tune
TCP keepalive for applications which don't do it in the userspace code.

v3:
  - update kernel-doc in uapi (Nikita Vetoshkin <nekto0n@yandex-team.ru>)

v4:
  - update kernel-doc in tools too (Alexei Starovoitov)
  - add test to selftests (Alexei Starovoitov)

Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200620153052.9439-3-zeil@yandex-team.ru
2020-06-24 11:21:03 -07:00
Quentin Monnet bcc7f554cf bpf: Fix formatting in documentation for BPF helpers
When producing the bpf-helpers.7 man page from the documentation from
the BPF user space header file, rst2man complains:

    <stdin>:2636: (ERROR/3) Unexpected indentation.
    <stdin>:2640: (WARNING/2) Block quote ends without a blank line; unexpected unindent.

Let's fix formatting for the relevant chunk (item list in
bpf_ringbuf_query()'s description), and for a couple other functions.

Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200623153935.6215-1-quentin@isovalent.com
2020-06-23 17:57:02 -07:00
Alexei Starovoitov 4e608675e7 Merge up to bpf_probe_read_kernel_str() fix into bpf-next 2020-06-23 15:33:41 -07:00
Andrii Nakryiko bdb7b79b4c bpf: Switch most helper return values from 32-bit int to 64-bit long
Switch most of BPF helper definitions from returning int to long. These
definitions are coming from comments in BPF UAPI header and are used to
generate bpf_helper_defs.h (under libbpf) to be later included and used from
BPF programs.

In actual in-kernel implementation, all the helpers are defined as returning
u64, but due to some historical reasons, most of them are actually defined as
returning int in UAPI (usually, to return 0 on success, and negative value on
error).

This actually causes Clang to quite often generate sub-optimal code, because
compiler believes that return value is 32-bit, and in a lot of cases has to be
up-converted (usually with a pair of 32-bit bit shifts) to 64-bit values,
before they can be used further in BPF code.

Besides just "polluting" the code, these 32-bit shifts quite often cause
problems for cases in which return value matters. This is especially the case
for the family of bpf_probe_read_str() functions. There are few other similar
helpers (e.g., bpf_read_branch_records()), in which return value is used by
BPF program logic to record variable-length data and process it. For such
cases, BPF program logic carefully manages offsets within some array or map to
read variable-length data. For such uses, it's crucial for BPF verifier to
track possible range of register values to prove that all the accesses happen
within given memory bounds. Those extraneous zero-extending bit shifts,
inserted by Clang (and quite often interleaved with other code, which makes
the issues even more challenging and sometimes requires employing extra
per-variable compiler barriers), throws off verifier logic and makes it mark
registers as having unknown variable offset. We'll study this pattern a bit
later below.

Another common pattern is to check return of BPF helper for non-zero state to
detect error conditions and attempt alternative actions in such case. Even in
this simple and straightforward case, this 32-bit vs BPF's native 64-bit mode
quite often leads to sub-optimal and unnecessary extra code. We'll look at
this pattern as well.

Clang's BPF target supports two modes of code generation: ALU32, in which it
is capable of using lower 32-bit parts of registers, and no-ALU32, in which
only full 64-bit registers are being used. ALU32 mode somewhat mitigates the
above described problems, but not in all cases.

This patch switches all the cases in which BPF helpers return 0 or negative
error from returning int to returning long. It is shown below that such change
in definition leads to equivalent or better code. No-ALU32 mode benefits more,
but ALU32 mode doesn't degrade or still gets improved code generation.

Another class of cases switched from int to long are bpf_probe_read_str()-like
helpers, which encode successful case as non-negative values, while still
returning negative value for errors.

In all of such cases, correctness is preserved due to two's complement
encoding of negative values and the fact that all helpers return values with
32-bit absolute value. Two's complement ensures that for negative values
higher 32 bits are all ones and when truncated, leave valid negative 32-bit
value with the same value. Non-negative values have upper 32 bits set to zero
and similarly preserve value when high 32 bits are truncated. This means that
just casting to int/u32 is correct and efficient (and in ALU32 mode doesn't
require any extra shifts).

To minimize the chances of regressions, two code patterns were investigated,
as mentioned above. For both patterns, BPF assembly was analyzed in
ALU32/NO-ALU32 compiler modes, both with current 32-bit int return type and
new 64-bit long return type.

Case 1. Variable-length data reading and concatenation. This is quite
ubiquitous pattern in tracing/monitoring applications, reading data like
process's environment variables, file path, etc. In such case, many pieces of
string-like variable-length data are read into a single big buffer, and at the
end of the process, only a part of array containing actual data is sent to
user-space for further processing. This case is tested in test_varlen.c
selftest (in the next patch). Code flow is roughly as follows:

  void *payload = &sample->payload;
  u64 len;

  len = bpf_probe_read_kernel_str(payload, MAX_SZ1, &source_data1);
  if (len <= MAX_SZ1) {
      payload += len;
      sample->len1 = len;
  }
  len = bpf_probe_read_kernel_str(payload, MAX_SZ2, &source_data2);
  if (len <= MAX_SZ2) {
      payload += len;
      sample->len2 = len;
  }
  /* and so on */
  sample->total_len = payload - &sample->payload;
  /* send over, e.g., perf buffer */

There could be two variations with slightly different code generated: when len
is 64-bit integer and when it is 32-bit integer. Both variations were analysed.
BPF assembly instructions between two successive invocations of
bpf_probe_read_kernel_str() were used to check code regressions. Results are
below, followed by short analysis. Left side is using helpers with int return
type, the right one is after the switch to long.

ALU32 + INT                                ALU32 + LONG
===========                                ============

64-BIT (13 insns):                         64-BIT (10 insns):
------------------------------------       ------------------------------------
  17:   call 115                             17:   call 115
  18:   if w0 > 256 goto +9 <LBB0_4>         18:   if r0 > 256 goto +6 <LBB0_4>
  19:   w1 = w0                              19:   r1 = 0 ll
  20:   r1 <<= 32                            21:   *(u64 *)(r1 + 0) = r0
  21:   r1 s>>= 32                           22:   r6 = 0 ll
  22:   r2 = 0 ll                            24:   r6 += r0
  24:   *(u64 *)(r2 + 0) = r1              00000000000000c8 <LBB0_4>:
  25:   r6 = 0 ll                            25:   r1 = r6
  27:   r6 += r1                             26:   w2 = 256
00000000000000e0 <LBB0_4>:                   27:   r3 = 0 ll
  28:   r1 = r6                              29:   call 115
  29:   w2 = 256
  30:   r3 = 0 ll
  32:   call 115

32-BIT (11 insns):                         32-BIT (12 insns):
------------------------------------       ------------------------------------
  17:   call 115                             17:   call 115
  18:   if w0 > 256 goto +7 <LBB1_4>         18:   if w0 > 256 goto +8 <LBB1_4>
  19:   r1 = 0 ll                            19:   r1 = 0 ll
  21:   *(u32 *)(r1 + 0) = r0                21:   *(u32 *)(r1 + 0) = r0
  22:   w1 = w0                              22:   r0 <<= 32
  23:   r6 = 0 ll                            23:   r0 >>= 32
  25:   r6 += r1                             24:   r6 = 0 ll
00000000000000d0 <LBB1_4>:                   26:   r6 += r0
  26:   r1 = r6                            00000000000000d8 <LBB1_4>:
  27:   w2 = 256                             27:   r1 = r6
  28:   r3 = 0 ll                            28:   w2 = 256
  30:   call 115                             29:   r3 = 0 ll
                                             31:   call 115

In ALU32 mode, the variant using 64-bit length variable clearly wins and
avoids unnecessary zero-extension bit shifts. In practice, this is even more
important and good, because BPF code won't need to do extra checks to "prove"
that payload/len are within good bounds.

32-bit len is one instruction longer. Clang decided to do 64-to-32 casting
with two bit shifts, instead of equivalent `w1 = w0` assignment. The former
uses extra register. The latter might potentially lose some range information,
but not for 32-bit value. So in this case, verifier infers that r0 is [0, 256]
after check at 18:, and shifting 32 bits left/right keeps that range intact.
We should probably look into Clang's logic and see why it chooses bitshifts
over sub-register assignments for this.

NO-ALU32 + INT                             NO-ALU32 + LONG
==============                             ===============

64-BIT (14 insns):                         64-BIT (10 insns):
------------------------------------       ------------------------------------
  17:   call 115                             17:   call 115
  18:   r0 <<= 32                            18:   if r0 > 256 goto +6 <LBB0_4>
  19:   r1 = r0                              19:   r1 = 0 ll
  20:   r1 >>= 32                            21:   *(u64 *)(r1 + 0) = r0
  21:   if r1 > 256 goto +7 <LBB0_4>         22:   r6 = 0 ll
  22:   r0 s>>= 32                           24:   r6 += r0
  23:   r1 = 0 ll                          00000000000000c8 <LBB0_4>:
  25:   *(u64 *)(r1 + 0) = r0                25:   r1 = r6
  26:   r6 = 0 ll                            26:   r2 = 256
  28:   r6 += r0                             27:   r3 = 0 ll
00000000000000e8 <LBB0_4>:                   29:   call 115
  29:   r1 = r6
  30:   r2 = 256
  31:   r3 = 0 ll
  33:   call 115

32-BIT (13 insns):                         32-BIT (13 insns):
------------------------------------       ------------------------------------
  17:   call 115                             17:   call 115
  18:   r1 = r0                              18:   r1 = r0
  19:   r1 <<= 32                            19:   r1 <<= 32
  20:   r1 >>= 32                            20:   r1 >>= 32
  21:   if r1 > 256 goto +6 <LBB1_4>         21:   if r1 > 256 goto +6 <LBB1_4>
  22:   r2 = 0 ll                            22:   r2 = 0 ll
  24:   *(u32 *)(r2 + 0) = r0                24:   *(u32 *)(r2 + 0) = r0
  25:   r6 = 0 ll                            25:   r6 = 0 ll
  27:   r6 += r1                             27:   r6 += r1
00000000000000e0 <LBB1_4>:                 00000000000000e0 <LBB1_4>:
  28:   r1 = r6                              28:   r1 = r6
  29:   r2 = 256                             29:   r2 = 256
  30:   r3 = 0 ll                            30:   r3 = 0 ll
  32:   call 115                             32:   call 115

In NO-ALU32 mode, for the case of 64-bit len variable, Clang generates much
superior code, as expected, eliminating unnecessary bit shifts. For 32-bit
len, code is identical.

So overall, only ALU-32 32-bit len case is more-or-less equivalent and the
difference stems from internal Clang decision, rather than compiler lacking
enough information about types.

Case 2. Let's look at the simpler case of checking return result of BPF helper
for errors. The code is very simple:

  long bla;
  if (bpf_probe_read_kenerl(&bla, sizeof(bla), 0))
      return 1;
  else
      return 0;

ALU32 + CHECK (9 insns)                    ALU32 + CHECK (9 insns)
====================================       ====================================
  0:    r1 = r10                             0:    r1 = r10
  1:    r1 += -8                             1:    r1 += -8
  2:    w2 = 8                               2:    w2 = 8
  3:    r3 = 0                               3:    r3 = 0
  4:    call 113                             4:    call 113
  5:    w1 = w0                              5:    r1 = r0
  6:    w0 = 1                               6:    w0 = 1
  7:    if w1 != 0 goto +1 <LBB2_2>          7:    if r1 != 0 goto +1 <LBB2_2>
  8:    w0 = 0                               8:    w0 = 0
0000000000000048 <LBB2_2>:                 0000000000000048 <LBB2_2>:
  9:    exit                                 9:    exit

Almost identical code, the only difference is the use of full register
assignment (r1 = r0) vs half-registers (w1 = w0) in instruction #5. On 32-bit
architectures, new BPF assembly might be slightly less optimal, in theory. But
one can argue that's not a big issue, given that use of full registers is
still prevalent (e.g., for parameter passing).

NO-ALU32 + CHECK (11 insns)                NO-ALU32 + CHECK (9 insns)
====================================       ====================================
  0:    r1 = r10                             0:    r1 = r10
  1:    r1 += -8                             1:    r1 += -8
  2:    r2 = 8                               2:    r2 = 8
  3:    r3 = 0                               3:    r3 = 0
  4:    call 113                             4:    call 113
  5:    r1 = r0                              5:    r1 = r0
  6:    r1 <<= 32                            6:    r0 = 1
  7:    r1 >>= 32                            7:    if r1 != 0 goto +1 <LBB2_2>
  8:    r0 = 1                               8:    r0 = 0
  9:    if r1 != 0 goto +1 <LBB2_2>        0000000000000048 <LBB2_2>:
 10:    r0 = 0                               9:    exit
0000000000000058 <LBB2_2>:
 11:    exit

NO-ALU32 is a clear improvement, getting rid of unnecessary zero-extension bit
shifts.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200623032224.4020118-1-andriin@fb.com
2020-06-24 00:04:36 +02:00
Horatiu Vultur 2464bc7c28 bridge: uapi: mrp: Fix MRP_PORT_ROLE
Currently the MRP_PORT_ROLE_NONE has the value 0x2 but this is in conflict
with the IEC 62439-2 standard. The standard defines the following port
roles: primary (0x0), secondary(0x1), interconnect(0x2).
Therefore remove the port role none.

Fixes: 4714d13791 ("bridge: uapi: mrp: Add mrp attributes.")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23 14:38:05 -07:00
Alexandre Cassen 79a28ddd18 rtnetlink: add keepalived rtm_protocol
Keepalived can set global static ip routes or virtual ip routes dynamically
following VRRP protocol states. Using a dedicated rtm_protocol will help
keeping track of it.

Changes in v2:
 - fix tab/space indenting

Signed-off-by: Alexandre Cassen <acassen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23 14:35:12 -07:00
Vasundhara Volam b5872cd0e8 devlink: Add support for board.serial_number to info_get cb.
Board serial number is a serial number, often available in PCI
*Vital Product Data*.

Also, update devlink-info.rst documentation file.

Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-22 16:15:04 -07:00
Parav Pandit 2a916ecc40 net/devlink: Support querying hardware address of port function
PCI PF and VF devlink port can manage the function represented by
a devlink port.

Enable users to query port function's hardware address.

Example of a PCI VF port which supports a port function:
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1
  function:
    hw_addr 00:11:22:33:44:66

$ devlink port show pci/0000:06:00.0/2 -jp
{
    "port": {
        "pci/0000:06:00.0/2": {
            "type": "eth",
            "netdev": "enp6s0pf0vf1",
            "flavour": "pcivf",
            "pfnum": 0,
            "vfnum": 1,
            "function": {
                "hw_addr": "00:11:22:33:44:66"
            }
        }
    }
}

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-22 15:29:19 -07:00