mirror of https://gitee.com/openkylin/linux.git
456 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Linus Torvalds
|
e2ae634014 |
RISC-V Patches for the 5.11 Merge Window, Part 1
We have a handful of new kernel features for 5.11:
* Support for the contiguous memory allocator.
* Support for IRQ Time Accounting
* Support for stack tracing
* Support for strict /dev/mem
* Support for kernel section protection
I'm being a bit conservative on the cutoff for this round due to the
timing, so this is all the new development I'm going to take for this
cycle (even if some of it probably normally would have been OK). There
are, however, some fixes on the list that I will likely be sending along
either later this week or early next week.
There is one issue in here: one of my test configurations
(PREEMPT{,_DEBUG}=y) fails to boot on QEMU 5.0.0 (from April) as of the
.text.init alignment patch. With any luck we'll sort out the issue, but
given how many bugs get fixed all over the place and how unrelated those
features seem my guess is that we're just running into something that's
been lurking for a while and has already been fixed in the newer QEMU
(though I wouldn't be surprised if it's one of these implicit
assumptions we have in the boot flow). If it was hardware I'd be
strongly inclined to look more closely, but given that users can upgrade
their simulators I'm less worried about it.
There are two merge conflicts, both in build files. They're both a bit
clunky: arch/riscv/Kconfig is out of order (I have a script that's
supposed to keep them in order, I'll fix it) and lib/Makefile is out of
order (though GENERIC_LIB here doesn't mean quite what it does above).
-----BEGIN PGP SIGNATURE-----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=GWIH
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.11-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"We have a handful of new kernel features for 5.11:
- Support for the contiguous memory allocator.
- Support for IRQ Time Accounting
- Support for stack tracing
- Support for strict /dev/mem
- Support for kernel section protection
I'm being a bit conservative on the cutoff for this round due to the
timing, so this is all the new development I'm going to take for this
cycle (even if some of it probably normally would have been OK). There
are, however, some fixes on the list that I will likely be sending
along either later this week or early next week.
There is one issue in here: one of my test configurations
(PREEMPT{,_DEBUG}=y) fails to boot on QEMU 5.0.0 (from April) as of
the .text.init alignment patch.
With any luck we'll sort out the issue, but given how many bugs get
fixed all over the place and how unrelated those features seem my
guess is that we're just running into something that's been lurking
for a while and has already been fixed in the newer QEMU (though I
wouldn't be surprised if it's one of these implicit assumptions we
have in the boot flow). If it was hardware I'd be strongly inclined to
look more closely, but given that users can upgrade their simulators
I'm less worried about it"
* tag 'riscv-for-linus-5.11-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
arm64: Use the generic devmem_is_allowed()
arm: Use the generic devmem_is_allowed()
RISC-V: Use the new generic devmem_is_allowed()
lib: Add a generic version of devmem_is_allowed()
riscv: Fixed kernel test robot warning
riscv: kernel: Drop unused clean rule
riscv: provide memmove implementation
RISC-V: Move dynamic relocation section under __init
RISC-V: Protect all kernel sections including init early
RISC-V: Align the .init.text section
RISC-V: Initialize SBI early
riscv: Enable ARCH_STACKWALK
riscv: Make stack walk callback consistent with generic code
riscv: Cleanup stacktrace
riscv: Add HAVE_IRQ_TIME_ACCOUNTING
riscv: Enable CMA support
riscv: Ignore Image.* and loader.bin
riscv: Clean up boot dir
riscv: Fix compressed Image formats build
RISC-V: Add kernel image sections to the resource tree
|
|
|
Andy Shevchenko
|
7546861a8c |
lib/cmdline_kunit: add a new test suite for cmdline API
Test get_option() for a starter which is provided by cmdline.c. [akpm@linux-foundation.org: fix warning by constifying cmdline_test_values] [andriy.shevchenko@linux.intel.com: type of expected returned values should be int] Link: https://lkml.kernel.org/r/20201116104244.15472-1-andriy.shevchenko@linux.intel.com [andriy.shevchenko@linux.intel.com: provide meaningful MODULE_LICENSE()] Link: https://lkml.kernel.org/r/20201116104257.15527-1-andriy.shevchenko@linux.intel.com Link: https://lkml.kernel.org/r/20201112180732.75589-6-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Vitor Massaru Iha <vitor@massaru.org> Cc: Mark Brown <broonie@kernel.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Gow <davidgow@google.com> Cc: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Arnd Bergmann
|
84edc2eff8 |
selftest/fpu: avoid clang warning
With extra warnings enabled, clang complains about the redundant
-mhard-float argument:
clang: error: argument unused during compilation: '-mhard-float' [-Werror,-Wunused-command-line-argument]
Move this into the gcc-only part of the Makefile.
Link: https://lkml.kernel.org/r/20201203223652.1320700-1-arnd@kernel.org
Fixes:
|
|
|
Palmer Dabbelt
|
7d95a88f92
|
Add and use a generic version of devmem_is_allowed()
As part of adding STRICT_DEVMEM support to the RISC-V port, Zong provided an implementation of devmem_is_allowed() that's exactly the same as the version in a handful of other ports. Rather than duplicate code, I've put a generic version of this in lib/ and used it for the RISC-V port. * palmer/generic-devmem: arm64: Use the generic devmem_is_allowed() arm: Use the generic devmem_is_allowed() RISC-V: Use the new generic devmem_is_allowed() lib: Add a generic version of devmem_is_allowed() |
|
|
Palmer Dabbelt
|
527701eda5
|
lib: Add a generic version of devmem_is_allowed()
As part of adding support for STRICT_DEVMEM to the RISC-V port, Zong provided a devmem_is_allowed() implementation that's exactly the same as all the others I checked. Instead I'm adding a generic version, which will soon be used. Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> |
|
|
Linus Torvalds
|
7cf726a594 |
linux-kselftest-kunit-5.10-rc1
This Kunit update for Linux 5.10-rc1 consists of: - add Kunit to kernel_init() and remove KUnit from init calls entirely. This addresses the concern Kunit would not work correctly during late init phase. - add a linker section where KUnit can put references to its test suites. This patch is the first step in transitioning to dispatching all KUnit tests from a centralized executor rather than having each as its own separate late_initcall. - add a centralized executor to dispatch tests rather than relying on late_initcall to schedule each test suite separately. Centralized execution is for built-in tests only; modules will execute tests when loaded. - convert bitfield test to use KUnit framework - Documentation updates for naming guidelines and how kunit_test_suite() works. - add test plan to KUnit TAP format -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAl+Mr68ACgkQCwJExA0N Qxy7HxAAuToPP6uUHwTC3KzVVE4hjP9a3t4hiD7kP/gI0umN+2nrccm6Vx6E+r9t Jkjiv9Yxj3riOkE5jJ8KriAx228mwz3N1yBEDfpp+8iCWOK3iOuFKKTTWOoZY4hf Enlf7n4Yp2TOEmIH0xwh/H67zl0+3FwT3fGWC6DDPXHuw+X+mGphCl9XPB70rZcT q/s0dwx1CmWBm30MgFXN+SZ7CgLP13lRAvkVO4t56/O1SkTbpCe7U1zqT2p5UoOY x7qvzs3pdCaWbpCsAqFWr46iECDHuVQjIgLuddOF/OgWVcCZlv7T7ESd7IDPHUPx DD3zYG0ODV0jKZHmpwkSojSbu3z6v5FnfhLpAcaHoEMBeRu5UIar7EjPHwqrqiU7 JqE7dBECmcD308sr9u0w44DK15nmsD3+njrBQ/AJmsWdg0wtnMvA01nAHKObbk0n 33aIu4Iny1dH35/rt9dV2DKT09f5r0ANCjoJMX8gu/li66FHGfULOaqr6KLLqi5X VPgHCKzyT9nD+Bc2LYzRWmhhAj+5Iwyglgpe9ZiOlPQ5i+hLvfPPAZxVYSbVA1Sk aVZi+ibKUqHSBfXcaLf/OKX7Csf4zni3F+WfFT5ZIC4Y6iEF+0tvS2HW2/pcUAN/ OSPYYmyqhwYIl8tvbQENgBsyU/K1rECxJpqWAznJLRCebkY5a/s= =0Sco -----END PGP SIGNATURE----- Merge tag 'linux-kselftest-kunit-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull more Kunit updates from Shuah Khan: - add Kunit to kernel_init() and remove KUnit from init calls entirely. This addresses the concern that Kunit would not work correctly during late init phase. - add a linker section where KUnit can put references to its test suites. This is the first step in transitioning to dispatching all KUnit tests from a centralized executor rather than having each as its own separate late_initcall. - add a centralized executor to dispatch tests rather than relying on late_initcall to schedule each test suite separately. Centralized execution is for built-in tests only; modules will execute tests when loaded. - convert bitfield test to use KUnit framework - Documentation updates for naming guidelines and how kunit_test_suite() works. - add test plan to KUnit TAP format * tag 'linux-kselftest-kunit-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: lib: kunit: Fix compilation test when using TEST_BIT_FIELD_COMPILE lib: kunit: add bitfield test conversion to KUnit Documentation: kunit: add a brief blurb about kunit_test_suite kunit: test: add test plan to KUnit TAP format init: main: add KUnit to kernel init kunit: test: create a single centralized executor for all tests vmlinux.lds.h: add linker section for KUnit test suites Documentation: kunit: Add naming guidelines |
|
|
Albert van der Linde
|
2c739ced58 |
lib, include/linux: add usercopy failure capability
Patch series "add fault injection to user memory access", v3. The goal of this series is to improve testing of fault-tolerance in usages of user memory access functions, by adding support for fault injection. syzkaller/syzbot are using the existing fault injection modes and will use this particular feature also. The first patch adds failure injection capability for usercopy functions. The second changes usercopy functions to use this new failure capability (copy_from_user, ...). The third patch adds get/put/clear_user failures to x86. This patch (of 3): Add a failure injection capability to improve testing of fault-tolerance in usages of user memory access functions. Add CONFIG_FAULT_INJECTION_USERCOPY to enable faults in usercopy functions. The should_fail_usercopy function is to be called by these functions (copy_from_user, get_user, ...) in order to fail or not. Signed-off-by: Albert van der Linde <alinde@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20200831171733.955393-1-alinde@google.com Link: http://lkml.kernel.org/r/20200831171733.955393-2-alinde@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Matthew Wilcox (Oracle)
|
e320d3012d |
mm/page_alloc.c: fix freeing non-compound pages
Here is a very rare race which leaks memory:
Page P0 is allocated to the page cache. Page P1 is free.
Thread A Thread B Thread C
find_get_entry():
xas_load() returns P0
Removes P0 from page cache
P0 finds its buddy P1
alloc_pages(GFP_KERNEL, 1) returns P0
P0 has refcount 1
page_cache_get_speculative(P0)
P0 has refcount 2
__free_pages(P0)
P0 has refcount 1
put_page(P0)
P1 is not freed
Fix this by freeing all the pages in __free_pages() that won't be freed
by the call to put_page(). It's usually not a good idea to split a page,
but this is a very unlikely scenario.
Fixes:
|
|
|
Patricia Alfonso
|
73228c7ecc |
KASAN: port KASAN Tests to KUnit
Transfer all previous tests for KASAN to KUnit so they can be run more easily. Using kunit_tool, developers can run these tests with their other KUnit tests and see "pass" or "fail" with the appropriate KASAN report instead of needing to parse each KASAN report to test KASAN functionalities. All KASAN reports are still printed to dmesg. Stack tests do not work properly when KASAN_STACK is enabled so those tests use a check for "if IS_ENABLED(CONFIG_KASAN_STACK)" so they only run if stack instrumentation is enabled. If KASAN_STACK is not enabled, KUnit will print a statement to let the user know this test was not run with KASAN_STACK enabled. copy_user_test and kasan_rcu_uaf cannot be run in KUnit so there is a separate test file for those tests, which can be run as before as a module. [trishalfonso@google.com: v14] Link: https://lkml.kernel.org/r/20200915035828.570483-4-davidgow@google.com Signed-off-by: Patricia Alfonso <trishalfonso@google.com> Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Shuah Khan <shuah@kernel.org> Cc: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lkml.kernel.org/r/20200910070331.3358048-4-davidgow@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Vitor Massaru Iha
|
d2585f5164 |
lib: kunit: add bitfield test conversion to KUnit
This adds the conversion of the runtime tests of test_bitfield, from `lib/test_bitfield.c` to KUnit tests. Code Style Documentation: [0] Signed-off-by: Vitor Massaru Iha <vitor@massaru.org> Link: [0] https://lore.kernel.org/linux-kselftest/20200620054944.167330-1-davidgow@google.com/T/#u Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
|
|
Arvind Sankar
|
33d0f96ffd |
lib/string.c: Use freestanding environment
gcc can transform the loop in a naive implementation of memset/memcpy etc into a call to the function itself. This optimization is enabled by -ftree-loop-distribute-patterns. This has been the case for a while, but gcc-10.x enables this option at -O2 rather than -O3 as in previous versions. Add -ffreestanding, which implicitly disables this optimization with gcc. It is unclear whether clang performs such optimizations, but hopefully it will also not do so in a freestanding environment. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=56888 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Rikard Falkeborn
|
6d511020e1 |
lib/test_bits.c: add tests of GENMASK
Add tests of GENMASK and GENMASK_ULL. A few test cases that should fail compilation are provided under #ifdef TEST_GENMASK_FAILURES [rd.dunlap@gmail.com: add MODULE_LICENSE()] Link: http://lkml.kernel.org/r/dfc74524-0789-2827-4eff-476ddab65699@gmail.com [weiyongjun1@huawei.com: make some functions static] Link: http://lkml.kernel.org/r/20200702150336.4756-1-weiyongjun1@huawei.com Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: Randy Dunlap <rd.dunlap@gmail.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: Syed Nayyar Waris <syednwaris@gmail.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Link: http://lkml.kernel.org/r/20200621054210.14804-2-rikard.falkeborn@gmail.com Link: http://lkml.kernel.org/r/20200608221823.35799-2-rikard.falkeborn@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Linus Torvalds
|
fc80c51fd4 |
Kbuild updates for v5.9
- run the checker (e.g. sparse) after the compiler - remove unneeded cc-option tests for old compiler flags - fix tar-pkg to install dtbs - introduce ccflags-remove-y and asflags-remove-y syntax - allow to trace functions in sub-directories of lib/ - introduce hostprogs-always-y and userprogs-always-y syntax - various Makefile cleanups -----BEGIN PGP SIGNATURE----- iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl8wJXEVHG1hc2FoaXJv eUBrZXJuZWwub3JnAAoJED2LAQed4NsGMGEP/0jDq/WafbfPN0aU83EqEWLt/sKg bluzmf/6HGx3XVRnuAzsHNNqysUx77WJiDsU/jbC/zdH8Iox3Sc1diE2sELLNAfY iJmQ8NBPggyU74aYG3OJdpDjz8T9EX/nVaYrjyFlbuXElM+Qvo8Z4Fz6NpWqKWlA gU+yGxEPPdX6MLHcSPSIu1hGWx7UT4fgfx3zDFTI2qvbQgQjKtzyTjAH5Cm3o87h rfomvHSSoAUg+Fh1LediRh1tJlkdVO+w7c+LNwCswmdBtkZuxecj1bQGUTS8GaLl CCWOKYfWp0KsVf1veXNNNaX/ecbp+Y34WErFq3V9Fdq5RmVlp+FPSGMyjDMRiQ/p LGvzbJLPpG586MnK8of0dOj6Es6tVPuq6WH2HuvsyTGcZJDpFTTxRcK3HDkE8ig6 ZtuM3owB/Mep8IzwY2yWQiDrc7TX5Fz8S4hzGPU1zG9cfj4VT6TBqHGAy1Eql/0l txj6vJpnbQSdXiIX8MIU3yH35Y7eW3JYWgspTZH5Woj1S/wAWwuG93Fuuxq6mQIJ q6LSkMavtOfuCjOA9vJBZewpKXRU6yo0CzWNL/5EZ6z/r/I+DGtfb/qka8oYUDjX 9H0cecL37AQxDHRPTxCZDQF0TpYiFJ6bmnMftK9NKNuIdvsk9DF7UBa3EdUNIj38 yKS3rI7Lw55xWuY3 =bkNQ -----END PGP SIGNATURE----- Merge tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - run the checker (e.g. sparse) after the compiler - remove unneeded cc-option tests for old compiler flags - fix tar-pkg to install dtbs - introduce ccflags-remove-y and asflags-remove-y syntax - allow to trace functions in sub-directories of lib/ - introduce hostprogs-always-y and userprogs-always-y syntax - various Makefile cleanups * tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: stop filtering out $(GCC_PLUGINS_CFLAGS) from cc-option base kbuild: include scripts/Makefile.* only when relevant CONFIG is enabled kbuild: introduce hostprogs-always-y and userprogs-always-y kbuild: sort hostprogs before passing it to ifneq kbuild: move host .so build rules to scripts/gcc-plugins/Makefile kbuild: Replace HTTP links with HTTPS ones kbuild: trace functions in subdirectories of lib/ kbuild: introduce ccflags-remove-y and asflags-remove-y kbuild: do not export LDFLAGS_vmlinux kbuild: always create directories of targets powerpc/boot: add DTB to 'targets' kbuild: buildtar: add dtbs support kbuild: remove cc-option test of -ffreestanding kbuild: remove cc-option test of -fno-stack-protector Revert "kbuild: Create directory for target DTB" kbuild: run the checker after the compiler |
|
|
Masahiro Yamada
|
15d5761ad3 |
kbuild: introduce ccflags-remove-y and asflags-remove-y
CFLAGS_REMOVE_<file>.o filters out flags when compiling a particular
object, but there is no convenient way to do that for every object in
a directory.
Add ccflags-remove-y and asflags-remove-y to make it easily.
Use ccflags-remove-y to clean up some Makefiles.
The add/remove order works as follows:
[1] KBUILD_CFLAGS specifies compiler flags used globally
[2] ccflags-y adds compiler flags for all objects in the
current Makefile
[3] ccflags-remove-y removes compiler flags for all objects in the
current Makefile (New feature)
[4] CFLAGS_<file> adds compiler flags per file.
[5] CFLAGS_REMOVE_<file> removes compiler flags per file.
Having [3] before [4] allows us to remove flags from most (but not all)
objects in the current Makefile.
For example, kernel/trace/Makefile removes $(CC_FLAGS_FTRACE)
from all objects in the directory, then adds it back to
trace_selftest_dynamic.o and CFLAGS_trace_kprobe_selftest.o
The same applies to lib/livepatch/Makefile.
Please note ccflags-remove-y has no effect to the sub-directories.
In contrast, the previous notation got rid of compiler flags also from
all the sub-directories.
The following are not affected because they have no sub-directories:
arch/arm/boot/compressed/
arch/powerpc/xmon/
arch/sh/
kernel/trace/
However, lib/ has several sub-directories.
To keep the behavior, I added ccflags-remove-y to all Makefiles
in subdirectories of lib/, except the following:
lib/vdso/Makefile - Kbuild does not descend into this Makefile
lib/raid/test/Makefile - This is not used for the kernel build
I think commit
|
|
|
Mike Rapoport
|
ab05eabfa1 |
mm: move lib/ioremap.c to mm/
The functionality in lib/ioremap.c deals with pagetables, vmalloc and caches, so it naturally belongs to mm/ Moving it there will also allow declaring p?d_alloc_track functions in an header file inside mm/ rather than having those declarations in include/linux/mm.h Suggested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Pekka Enberg <penberg@kernel.org> Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Joerg Roedel <joro@8bytes.org> Cc: Joerg Roedel <jroedel@suse.de> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Cc: Stafford Horne <shorne@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Matthew Wilcox <willy@infradead.org> Link: http://lkml.kernel.org/r/20200627143453.31835-8-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Linus Torvalds
|
47ec5303d7 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from David Miller:
1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.
2) Support UDP segmentation in code TSO code, from Eric Dumazet.
3) Allow flashing different flash images in cxgb4 driver, from Vishal
Kulkarni.
4) Add drop frames counter and flow status to tc flower offloading,
from Po Liu.
5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.
6) Various new indirect call avoidance, from Eric Dumazet and Brian
Vazquez.
7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
Yonghong Song.
8) Support querying and setting hardware address of a port function via
devlink, use this in mlx5, from Parav Pandit.
9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.
10) Switch qca8k driver over to phylink, from Jonathan McDowell.
11) In bpftool, show list of processes holding BPF FD references to
maps, programs, links, and btf objects. From Andrii Nakryiko.
12) Several conversions over to generic power management, from Vaibhav
Gupta.
13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
Yakunin.
14) Various https url conversions, from Alexander A. Klimov.
15) Timestamping and PHC support for mscc PHY driver, from Antoine
Tenart.
16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.
17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.
18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.
19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
drivers. From Luc Van Oostenryck.
20) XDP support for xen-netfront, from Denis Kirjanov.
21) Support receive buffer autotuning in MPTCP, from Florian Westphal.
22) Support EF100 chip in sfc driver, from Edward Cree.
23) Add XDP support to mvpp2 driver, from Matteo Croce.
24) Support MPTCP in sock_diag, from Paolo Abeni.
25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
infrastructure, from Jakub Kicinski.
26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.
27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.
28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.
29) Refactor a lot of networking socket option handling code in order to
avoid set_fs() calls, from Christoph Hellwig.
30) Add rfc4884 support to icmp code, from Willem de Bruijn.
31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.
32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.
33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.
34) Support TCP syncookies in MPTCP, from Flowian Westphal.
35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
Brivio.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
net: thunderx: initialize VF's mailbox mutex before first usage
usb: hso: remove bogus check for EINPROGRESS
usb: hso: no complaint about kmalloc failure
hso: fix bailout in error case of probe
ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
selftests/net: relax cpu affinity requirement in msg_zerocopy test
mptcp: be careful on subflow creation
selftests: rtnetlink: make kci_test_encap() return sub-test result
selftests: rtnetlink: correct the final return value for the test
net: dsa: sja1105: use detected device id instead of DT one on mismatch
tipc: set ub->ifindex for local ipv6 address
ipv6: add ipv6_dev_find()
net: openvswitch: silence suspicious RCU usage warning
Revert "vxlan: fix tos value before xmit"
ptp: only allow phase values lower than 1 period
farsync: switch from 'pci_' to 'dma_' API
wan: wanxl: switch from 'pci_' to 'dma_' API
hv_netvsc: do not use VF device if link is down
dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
net: macb: Properly handle phylink on at91sam9x
...
|
|
|
Linus Torvalds
|
0a897743ac |
A single commit that adds the /sys/kernel/debug/selftest_helpers/test_fpu FPU self-test.
Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl8oUawRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1iIxw//dFlYF9W5W5dBOK0keLlUiHr2WG77Emwz I1+sGfTIZAkWCrbCYhVBSOr3tfQ+aJ/HHNlVLHYX9USah297z3gLUZJ+pVdvPPO7 Sb56KwZ/0d6usiuullirSe2btCV+qEtxGJVVqeR9YpcEW6If9Nhp2r1eLzqjo9up M6MJKtGeLBuifjPU5zyay7cAE1fW4LxA92fEWtG5GXbMSCndrU0defwge4iQFYD+ RnbAuDf/L9pe8dbOfvnH6K12mBeoD6Z3MnMXiUTu6zvivp4hQshfKw24BCKBKlRZ kkZ16pVKX48sXulhI89ppVUJGUhmhSF/1mrPZSi1PbZltZcS+oCH5GEGTM9KCHfR HKsUl1lxNjTKU3cTZLyYMQqniiPj51h53h7DhDyTdh3RW+Dh6wp2DhoaRpZw0Nd+ 8VUpbMSNKlEbPzuHT5z8XjcwPIynoxxLCo2AGRbEuoeuY9Sv337ST/pvXdPbdRX+ 1Y8PPOpB3xgBnFZur3VXHdIFz0CwS7XoX56ZLY7ahWzBHNP+BHhICPY//QhyWfMf mVeJSRdSHlF30Sle/xDoy6up5EqlbhclUUwhpQwFaSqPMBo6ygb6Xtya/tLXmDUz bl4qJNVs2RFaH+68XTlCh7lUnDaSDjBXlA6Ymo3qF9AE0FJoqvfzzKRPKs68YVu8 a38VxITW1sI= =mdhI -----END PGP SIGNATURE----- Merge tag 'x86-fpu-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 FPU selftest from Ingo Molnar: "Add the /sys/kernel/debug/selftest_helpers/test_fpu FPU self-test" * tag 'x86-fpu-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: selftests/fpu: Add an FPU selftest |
|
|
Nick Terrell
|
4963bb2b89 |
lib: Add zstd support to decompress
- Add unzstd() and the zstd decompress interface. - Add zstd support to decompress_method(). The decompress_method() and unzstd() functions are used to decompress the initramfs and the initrd. The __decompress() function is used in the preboot environment to decompress a zstd compressed kernel. The zstd decompression function allows the input and output buffers to overlap because that is used by x86 kernel decompression. Signed-off-by: Nick Terrell <terrelln@fb.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20200730190841.2071656-3-nickrterrell@gmail.com |
|
|
Jacob Keller
|
b8265621f4 |
Add pldmfw library for PLDM firmware update
The pldmfw library is used to implement common logic needed to flash devices based on firmware files using the format described by the PLDM for Firmware Update standard. This library consists of logic to parse the PLDM file format from a firmware file object, as well as common logic for sending the relevant PLDM header data to the device firmware. A simple ops table is provided so that device drivers can implement device specific hardware interactions while keeping the common logic to the pldmfw library. This library will be used by the Intel ice networking driver as part of implementing device flash update via devlink. The library aims to be vendor and device agnostic. For this reason, it has been placed in lib/pldmfw, in the hopes that other devices which use the PLDM firmware file format may benefit from it in the future. However, do note that not all features defined in the PLDM standard have been implemented. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Masahiro Yamada
|
893ab00439 |
kbuild: remove cc-option test of -fno-stack-protector
Some Makefiles already pass -fno-stack-protector unconditionally. For example, arch/arm64/kernel/vdso/Makefile, arch/x86/xen/Makefile. No problem report so far about hard-coding this option. So, we can assume all supported compilers know -fno-stack-protector. GCC 4.8 and Clang support this option (https://godbolt.org/z/_HDGzN) Get rid of cc-option from -fno-stack-protector. Remove CONFIG_CC_HAS_STACKPROTECTOR_NONE, which is always 'y'. Note: arch/mips/vdso/Makefile adds -fno-stack-protector twice, first unconditionally, and second conditionally. I removed the second one. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> |
|
|
Petteri Aimonen
|
4185b3b927 |
selftests/fpu: Add an FPU selftest
Add a selftest for the usage of FPU code in kernel mode.
Currently only implemented for x86. In the future, kernel FPU testing
could be unified between the different architectures supporting it.
[ bp:
- Split out from a conglomerate patch, put comments over statements.
- run the test only on debugfs write.
- Add bare-minimum run_test_fpu.sh, run 1000 iterations on all CPUs
by default.
- Add conditionally -msse2 so that clang doesn't generate library
calls.
- Use cc-option to detect gcc 7.1 not supporting -mpreferred-stack-boundary=3 (amluto).
- Document stuff so that we don't forget.
- Fix:
ld: lib/test_fpu.o: in function `test_fpu_get':
>> test_fpu.c:(.text+0x16e): undefined reference to `__sanitizer_cov_trace_cmpd'
>> ld: test_fpu.c:(.text+0x1a7): undefined reference to `__sanitizer_cov_trace_cmpd'
ld: test_fpu.c:(.text+0x1e0): undefined reference to `__sanitizer_cov_trace_cmpd'
]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Petteri Aimonen <jpa@git.mail.kapsi.fi>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lkml.kernel.org/r/20200624114646.28953-3-bp@alien8.de
|
|
|
Thomas Gleixner
|
37d1a04b13 |
Rebase locking/kcsan to locking/urgent
Merge the state of the locking kcsan branch before the read/write_once() and the atomics modifications got merged. Squash the fallout of the rebase on top of the read/write once and atomic fallback work into the merge. The history of the original branch is preserved in tag locking-kcsan-2020-06-02. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
|
|
Orson Zhai
|
ceabef7dd7 |
dynamic_debug: add an option to enable dynamic debug for modules only
Instead of enabling dynamic debug globally with CONFIG_DYNAMIC_DEBUG, CONFIG_DYNAMIC_DEBUG_CORE will only enable core function of dynamic debug. With the DYNAMIC_DEBUG_MODULE defined for any modules, dynamic debug will be tied to them. This is useful for people who only want to enable dynamic debug for kernel modules without worrying about kernel image size and memory consumption is increasing too much. [orson.zhai@unisoc.com: v2] Link: http://lkml.kernel.org/r/1587408228-10861-1-git-send-email-orson.unisoc@gmail.com Signed-off-by: Orson Zhai <orson.zhai@unisoc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Petr Mladek <pmladek@suse.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jason Baron <jbaron@akamai.com> Cc: Randy Dunlap <rdunlap@infradead.org> Link: http://lkml.kernel.org/r/1586521984-5890-1-git-send-email-orson.unisoc@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Jesse Brandeburg
|
c348c16305 |
lib: make a test module with set/clear bit
Test some bit clears/sets to make sure assembly doesn't change, and that the set_bit and clear_bit functions work and don't cause sparse warnings. Instruct Kbuild to build this file with extra warning level -Wextra, to catch new issues, and also doesn't hurt to build with C=1. This was used to test changes to arch/x86/include/asm/bitops.h. In particular, sparse (C=1) was very concerned when the last bit before a natural boundary, like 7, or 31, was being tested, as this causes sign extension (0xffffff7f) for instance when clearing bit 7. Recommended usage: make defconfig scripts/config -m CONFIG_TEST_BITOPS make modules_prepare make C=1 W=1 lib/test_bitops.ko objdump -S -d lib/test_bitops.ko insmod lib/test_bitops.ko rmmod lib/test_bitops.ko <check dmesg>, there should be no compiler/sparse warnings and no error messages in log. Link: http://lkml.kernel.org/r/20200310221747.2848474-2-jesse.brandeburg@intel.com Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> CcL Ingo Molnar <mingo@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Linus Torvalds
|
cfa3b8068b |
hmm related patches for 5.8
This series adds a selftest for hmm_range_fault() and several of the
DEVICE_PRIVATE migration related actions, and another simplification for
hmm_range_fault()'s API.
- Simplify hmm_range_fault() with a simpler return code, no
HMM_PFN_SPECIAL, and no customizable output PFN format
- Add a selftest for hmm_range_fault() and DEVICE_PRIVATE related
functionality
-----BEGIN PGP SIGNATURE-----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=twev
-----END PGP SIGNATURE-----
Merge tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull hmm updates from Jason Gunthorpe:
"This series adds a selftest for hmm_range_fault() and several of the
DEVICE_PRIVATE migration related actions, and another simplification
for hmm_range_fault()'s API.
- Simplify hmm_range_fault() with a simpler return code, no
HMM_PFN_SPECIAL, and no customizable output PFN format
- Add a selftest for hmm_range_fault() and DEVICE_PRIVATE related
functionality"
* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
MAINTAINERS: add HMM selftests
mm/hmm/test: add selftests for HMM
mm/hmm/test: add selftest driver for HMM
mm/hmm: remove the customizable pfn format from hmm_range_fault
mm/hmm: remove HMM_PFN_SPECIAL
drm/amdgpu: remove dead code after hmm_range_fault()
mm/hmm: make hmm_range_fault return 0 or -1
|
|
|
Ralph Campbell
|
b2ef9f5a5c |
mm/hmm/test: add selftest driver for HMM
This driver is for testing device private memory migration and devices which use hmm_range_fault() to access system memory via device page tables. Link: https://lore.kernel.org/r/20200422195028.3684-2-rcampbell@nvidia.com Link: https://lore.kernel.org/r/20200516010424.2013-1-rcampbell@nvidia.com Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Link: https://lore.kernel.org/r/20200509030225.14592-1-weiyongjun1@huawei.com Link: https://lore.kernel.org/r/20200509030234.14747-1-weiyongjun1@huawei.com Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20200511183704.GA225608@mwanda Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> |
|
|
Matti Vaittinen
|
33d599f052
|
lib/test_linear_ranges: add a test for the 'linear_ranges'
Add a KUnit test for the linear_ranges helper. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Link: https://lore.kernel.org/r/311fea741bafdcd33804d3187c1642e24275e3e5.1588944082.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org> |
|
|
Matti Vaittinen
|
d2218d4e4a
|
lib: add linear ranges helpers
Many devices have control registers which control some measurable property. Often a register contains control field so that change in this field causes linear change in the controlled property. It is not a rare case that user wants to give 'meaningful' control values and driver needs to convert them to register field values. Even more often user wants to 'see' the currently set value - again in meaningful units - and driver needs to convert the values it reads from register to these meaningful units. Examples of this include: - regulators, voltage/current configurations - power, voltage/current configurations - clk(?) NCOs and maybe others I can't think of right now. Provide a linear_range helper which can do conversion from user value to register value 'selector'. The idea here is stolen from regulator framework and patches refactoring the regulator helpers to use this are following. Current implementation does not support inversely proportional ranges but it might be useful if we could support also inversely proportional ranges? Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/59259bc475e0c800eb4bb163f02528c7c01f7b3a.1588944082.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org> |
|
|
Ingo Molnar
|
3b02a051d2 |
Linux 5.7-rc1
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl6TbaUeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhgkH/iWpiKvosA20HJjC rBqYeJPxQsgZTuBieWJ+MeVxbpcF7RlM4c+glyvg3QJhHwIEG58dl6LBrQbAyBAR aFHNojr1iAYOruVCGnU3pA008YZiwUIDv/ZQ4DF8fmIU2vI2mJ6qHBv3XDl4G2uR Nwz8Eu9AgIwZM5coomVOSmoWyFy7Vxmb7W+3t5VmKsvOWx4ib9kyQtOIkvQDEl7j XCbWfI0xDQr6LFOm4jnCi5R/LhJ2LIqqIvHHrunbpszM8IwK797jCXz4im+dmd5Y +km46N7a8pDqri36xXz1gdBAU3eG7Pt1NyvfjwRVTdX4GquQ2MT0GoojxbLxUP3y 3pEsQuE= =whbL -----END PGP SIGNATURE----- Merge tag 'v5.7-rc1' into locking/kcsan, to resolve conflicts and refresh Resolve these conflicts: arch/x86/Kconfig arch/x86/kernel/Makefile Do a minor "evil merge" to move the KCSAN entry up a bit by a few lines in the Kconfig to reduce the probability of future conflicts. Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Kees Cook
|
0887a7ebc9 |
ubsan: add trap instrumentation option
Patch series "ubsan: Split out bounds checker", v5.
This splits out the bounds checker so it can be individually used. This
is enabled in Android and hopefully for syzbot. Includes LKDTM tests for
behavioral corner-cases (beyond just the bounds checker), and adjusts
ubsan and kasan slightly for correct panic handling.
This patch (of 6):
The Undefined Behavior Sanitizer can operate in two modes: warning
reporting mode via lib/ubsan.c handler calls, or trap mode, which uses
__builtin_trap() as the handler. Using lib/ubsan.c means the kernel image
is about 5% larger (due to all the debugging text and reporting structures
to capture details about the warning conditions). Using the trap mode,
the image size changes are much smaller, though at the loss of the
"warning only" mode.
In order to give greater flexibility to system builders that want minimal
changes to image size and are prepared to deal with kernel code being
aborted and potentially destabilizing the system, this introduces
CONFIG_UBSAN_TRAP. The resulting image sizes comparison:
text data bss dec hex filename
19533663 6183037 18554956 44271656 2a38828 vmlinux.stock
19991849 7618513 18874448 46484810 2c54d4a vmlinux.ubsan
19712181 6284181 18366540 44362902
|
|
|
Alexander Potapenko
|
7b65942fb2 |
lib/stackdepot.c: build with -fno-builtin
Clang may replace stackdepot_memcmp() with a call to instrumented bcmp(), which is exactly what we wanted to avoid creating stackdepot_memcmp(). Building the file with -fno-builtin prevents such optimizations. This patch has been previously mailed as part of KMSAN RFC patch series. Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Link: http://lkml.kernel.org/r/20200220141916.55455-2-glider@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Kees Cook
|
9cf016e6b4 |
lib: test_stackinit.c: XFAIL switch variable init tests
The tests for initializing a variable defined between a switch statement's test and its first "case" statement are currently not initialized in Clang[1] nor the proposed auto-initialization feature in GCC. We should retain the test (so that we can evaluate compiler fixes), but mark it as an "expected fail". The rest of the kernel source will be adjusted to avoid this corner case. Also disable -Wswitch-unreachable for the test so that the intentionally broken code won't trigger warnings for GCC (nor future Clang) when initialization happens this unhandled place. [1] https://bugs.llvm.org/show_bug.cgi?id=44916 Suggested-by: Alexander Potapenko <glider@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Jann Horn <jannh@google.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Link: http://lkml.kernel.org/r/202002191358.2897A07C6@keescook Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Konstantin Khlebnikov
|
30428ef5d1 |
lib/test_lockup: test module to generate lockups
CONFIG_TEST_LOCKUP=m adds module "test_lockup" that helps to make sure
that watchdogs and lockup detectors are working properly.
Depending on module parameters test_lockup could emulate soft or hard
lockup, "hung task", hold arbitrary lock, allocate bunch of pages.
Also it could generate series of lockups with cooling-down periods, in
this way it could be used as "ping" for locks or page allocator. Loop
checks signals between iteration thus could be stopped by ^C.
# modinfo test_lockup
...
parm: time_secs:lockup time in seconds, default 0 (uint)
parm: time_nsecs:nanoseconds part of lockup time, default 0 (uint)
parm: cooldown_secs:cooldown time between iterations in seconds, default 0 (uint)
parm: cooldown_nsecs:nanoseconds part of cooldown, default 0 (uint)
parm: iterations:lockup iterations, default 1 (uint)
parm: all_cpus:trigger lockup at all cpus at once (bool)
parm: state:wait in 'R' running (default), 'D' uninterruptible, 'K' killable, 'S' interruptible state (charp)
parm: use_hrtimer:use high-resolution timer for sleeping (bool)
parm: iowait:account sleep time as iowait (bool)
parm: lock_read:lock read-write locks for read (bool)
parm: lock_single:acquire locks only at one cpu (bool)
parm: reacquire_locks:release and reacquire locks/irq/preempt between iterations (bool)
parm: touch_softlockup:touch soft-lockup watchdog between iterations (bool)
parm: touch_hardlockup:touch hard-lockup watchdog between iterations (bool)
parm: call_cond_resched:call cond_resched() between iterations (bool)
parm: measure_lock_wait:measure lock wait time (bool)
parm: lock_wait_threshold:print lock wait time longer than this in nanoseconds, default off (ulong)
parm: disable_irq:disable interrupts: generate hard-lockups (bool)
parm: disable_softirq:disable bottom-half irq handlers (bool)
parm: disable_preempt:disable preemption: generate soft-lockups (bool)
parm: lock_rcu:grab rcu_read_lock: generate rcu stalls (bool)
parm: lock_mmap_sem:lock mm->mmap_sem: block procfs interfaces (bool)
parm: lock_rwsem_ptr:lock rw_semaphore at address (ulong)
parm: lock_mutex_ptr:lock mutex at address (ulong)
parm: lock_spinlock_ptr:lock spinlock at address (ulong)
parm: lock_rwlock_ptr:lock rwlock at address (ulong)
parm: alloc_pages_nr:allocate and free pages under locks (uint)
parm: alloc_pages_order:page order to allocate (uint)
parm: alloc_pages_gfp:allocate pages with this gfp_mask, default GFP_KERNEL (uint)
parm: alloc_pages_atomic:allocate pages with GFP_ATOMIC (bool)
parm: reallocate_pages:free and allocate pages between iterations (bool)
Parameters for locking by address are unsafe and taints kernel. With
CONFIG_DEBUG_SPINLOCK=y they at least check magics for embedded spinlocks.
Examples:
task hang in D-state:
modprobe test_lockup time_secs=1 iterations=60 state=D
task hang in io-wait D-state:
modprobe test_lockup time_secs=1 iterations=60 state=D iowait
softlockup:
modprobe test_lockup time_secs=1 iterations=60 state=R
hardlockup:
modprobe test_lockup time_secs=1 iterations=60 state=R disable_irq
system-wide hardlockup:
modprobe test_lockup time_secs=1 iterations=60 state=R \
disable_irq all_cpus
rcu stall:
modprobe test_lockup time_secs=1 iterations=60 state=R \
lock_rcu touch_softlockup
lock mmap_sem / block procfs interfaces:
modprobe test_lockup time_secs=1 iterations=60 state=S lock_mmap_sem
lock tasklist_lock for read / block forks:
TASKLIST_LOCK=$(awk '$3 == "tasklist_lock" {print "0x"$1}' /proc/kallsyms)
modprobe test_lockup time_secs=1 iterations=60 state=R \
disable_irq lock_read lock_rwlock_ptr=$TASKLIST_LOCK
lock namespace_sem / block vfs mount operations:
NAMESPACE_SEM=$(awk '$3 == "namespace_sem" {print "0x"$1}' /proc/kallsyms)
modprobe test_lockup time_secs=1 iterations=60 state=S \
lock_rwsem_ptr=$NAMESPACE_SEM
lock cgroup mutex / block cgroup operations:
CGROUP_MUTEX=$(awk '$3 == "cgroup_mutex" {print "0x"$1}' /proc/kallsyms)
modprobe test_lockup time_secs=1 iterations=60 state=S \
lock_mutex_ptr=$CGROUP_MUTEX
ping cgroup_mutex every second and measure maximum lock wait time:
modprobe test_lockup cooldown_secs=1 iterations=60 state=S \
lock_mutex_ptr=$CGROUP_MUTEX reacquire_locks measure_lock_wait
[linux@roeck-us.net: rename disable_irq to fix build error]
Link: http://lkml.kernel.org/r/20200317133614.23152-1-linux@roeck-us.net
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Link: http://lkml.kernel.org/r/158132859146.2797.525923171323227836.stgit@buzz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Ingo Molnar
|
a4654e9bde |
Merge branch 'x86/kdump' into locking/kcsan, to resolve conflicts
Conflicts: arch/x86/purgatory/Makefile Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Ian Rogers
|
6e24628d78 |
lib: Introduce generic min-heap
Supports push, pop and converting an array into a heap. If the sense of the compare function is inverted then it can provide a max-heap. Based-on-work-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ian Rogers <irogers@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200214075133.181299-3-irogers@google.com |
|
|
Linus Torvalds
|
61a7595403 |
Various fixes:
- Fix an uninitialized variable
- Fix compile bug to bootconfig userspace tool (in tools directory)
- Suppress some error messages of bootconfig userspace tool
- Remove unneded CONFIG_LIBXBC from bootconfig
- Allocate bootconfig xbc_nodes dynamically.
To ease complaints about taking up static memory at boot up
- Use of parse_args() to parse bootconfig instead of strstr() usage
Prevents issues of double quotes containing the interested string
- Fix missing ring_buffer_nest_end() on synthetic event error path
- Return zero not -EINVAL on soft disabled synthetic event
(soft disabling must be the same as hard disabling, which returns zero)
- Consolidate synthetic event code (remove duplicate code)
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXkMTwRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnJQAQD5aKiD6jx+zGtLsFTuZMcEGvhhUuJ6
oUaSvhKO3UqezwD/V5avKuuC0wWt//gOWDY+0+4QNjmvn1GLnaNYohs6fg0=
=NLT9
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Various fixes:
- Fix an uninitialized variable
- Fix compile bug to bootconfig userspace tool (in tools directory)
- Suppress some error messages of bootconfig userspace tool
- Remove unneded CONFIG_LIBXBC from bootconfig
- Allocate bootconfig xbc_nodes dynamically. To ease complaints about
taking up static memory at boot up
- Use of parse_args() to parse bootconfig instead of strstr() usage
Prevents issues of double quotes containing the interested string
- Fix missing ring_buffer_nest_end() on synthetic event error path
- Return zero not -EINVAL on soft disabled synthetic event (soft
disabling must be the same as hard disabling, which returns zero)
- Consolidate synthetic event code (remove duplicate code)"
* tag 'trace-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Consolidate trace() functions
tracing: Don't return -EINVAL when tracing soft disabled synth events
tracing: Add missing nest end to synth_event_trace_start() error case
tools/bootconfig: Suppress non-error messages
bootconfig: Allocate xbc_nodes array dynamically
bootconfig: Use parse_args() to find bootconfig and '--'
tracing/kprobe: Fix uninitialized variable bug
bootconfig: Remove unneeded CONFIG_LIBXBC
tools/bootconfig: Fix wrong __VA_ARGS__ usage
|
|
|
Masami Hiramatsu
|
26445f98ea |
bootconfig: Remove unneeded CONFIG_LIBXBC
Since there is no user except CONFIG_BOOT_CONFIG and no plan to use it from other functions, CONFIG_LIBXBC can be removed and we can use CONFIG_BOOT_CONFIG directly. Link: http://lkml.kernel.org/r/158098769281.939.16293492056419481105.stgit@devnote2 Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
|
|
Linus Torvalds
|
89a47dd1af |
Kbuild updates for v5.6 (2nd)
- fix randconfig to generate a sane .config
- rename hostprogs-y / always to hostprogs / always-y, which are
more natual syntax.
- optimize scripts/kallsyms
- fix yes2modconfig and mod2yesconfig
- make multiple directory targets ('make foo/ bar/') work
-----BEGIN PGP SIGNATURE-----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=sv4U
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix randconfig to generate a sane .config
- rename hostprogs-y / always to hostprogs / always-y, which are more
natual syntax.
- optimize scripts/kallsyms
- fix yes2modconfig and mod2yesconfig
- make multiple directory targets ('make foo/ bar/') work
* tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: make multiple directory targets work
kconfig: Invalidate all symbols after changing to y or m.
kallsyms: fix type of kallsyms_token_table[]
scripts/kallsyms: change table to store (strcut sym_entry *)
scripts/kallsyms: rename local variables in read_symbol()
kbuild: rename hostprogs-y/always to hostprogs/always-y
kbuild: fix the document to use extra-y for vmlinux.lds
kconfig: fix broken dependency in randconfig-generated .config
|
|
|
Linus Torvalds
|
e310396bb8 |
Tracing updates:
- Added new "bootconfig".
Looks for a file appended to initrd to add boot config options.
This has been discussed thoroughly at Linux Plumbers.
Very useful for adding kprobes at bootup.
Only enabled if "bootconfig" is on the real kernel command line.
- Created dynamic event creation.
Merges common code between creating synthetic events and
kprobe events.
- Rename perf "ring_buffer" structure to "perf_buffer"
- Rename ftrace "ring_buffer" structure to "trace_buffer"
Had to rename existing "trace_buffer" to "array_buffer"
- Allow trace_printk() to work withing (some) tracing code.
- Sort of tracing configs to be a little better organized
- Fixed bug where ftrace_graph hash was not being protected properly
- Various other small fixes and clean ups
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXjtAURQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qshOAQDzopQmvAVrrI6oogghr8JQA30Z2yqT
i+Ld7vPWL2MV9wEA1S+zLGDSYrj8f/vsCq6BxRYT1ApO+YtmY6LTXiUejwg=
=WNds
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Added new "bootconfig".
This looks for a file appended to initrd to add boot config options,
and has been discussed thoroughly at Linux Plumbers.
Very useful for adding kprobes at bootup.
Only enabled if "bootconfig" is on the real kernel command line.
- Created dynamic event creation.
Merges common code between creating synthetic events and kprobe
events.
- Rename perf "ring_buffer" structure to "perf_buffer"
- Rename ftrace "ring_buffer" structure to "trace_buffer"
Had to rename existing "trace_buffer" to "array_buffer"
- Allow trace_printk() to work withing (some) tracing code.
- Sort of tracing configs to be a little better organized
- Fixed bug where ftrace_graph hash was not being protected properly
- Various other small fixes and clean ups
* tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (88 commits)
bootconfig: Show the number of nodes on boot message
tools/bootconfig: Show the number of bootconfig nodes
bootconfig: Add more parse error messages
bootconfig: Use bootconfig instead of boot config
ftrace: Protect ftrace_graph_hash with ftrace_sync
ftrace: Add comment to why rcu_dereference_sched() is open coded
tracing: Annotate ftrace_graph_notrace_hash pointer with __rcu
tracing: Annotate ftrace_graph_hash pointer with __rcu
bootconfig: Only load bootconfig if "bootconfig" is on the kernel cmdline
tracing: Use seq_buf for building dynevent_cmd string
tracing: Remove useless code in dynevent_arg_pair_add()
tracing: Remove check_arg() callbacks from dynevent args
tracing: Consolidate some synth_event_trace code
tracing: Fix now invalid var_ref_vals assumption in trace action
tracing: Change trace_boot to use synth_event interface
tracing: Move tracing selftests to bottom of menu
tracing: Move mmio tracer config up with the other tracers
tracing: Move tracing test module configs together
tracing: Move all function tracing configs together
tracing: Documentation for in-kernel synthetic event API
...
|
|
|
Masahiro Yamada
|
5f2fb52fac |
kbuild: rename hostprogs-y/always to hostprogs/always-y
In old days, the "host-progs" syntax was used for specifying host
programs. It was renamed to the current "hostprogs-y" in 2004.
It is typically useful in scripts/Makefile because it allows Kbuild to
selectively compile host programs based on the kernel configuration.
This commit renames like follows:
always -> always-y
hostprogs-y -> hostprogs
So, scripts/Makefile will look like this:
always-$(CONFIG_BUILD_BIN2C) += ...
always-$(CONFIG_KALLSYMS) += ...
...
hostprogs := $(always-y) $(always-m)
I think this makes more sense because a host program is always a host
program, irrespective of the kernel configuration. We want to specify
which ones to compile by CONFIG options, so always-y will be handier.
The "always", "hostprogs-y", "hostprogs-m" will be kept for backward
compatibility for a while.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
|
Dmitry Vyukov
|
43e76af85f |
kcov: ignore fault-inject and stacktrace
Don't instrument 3 more files that contain debugging facilities and produce large amounts of uninteresting coverage for every syscall. The following snippets are sprinkled all over the place in kcov traces in a debugging kernel. We already try to disable instrumentation of stack unwinding code and of most debug facilities. I guess we did not use fault-inject.c at the time, and stacktrace.c was somehow missed (or something has changed in kernel/configs). This change both speeds up kcov (kernel doesn't need to store these PCs, user-space doesn't need to process them) and frees trace buffer capacity for more useful coverage. should_fail lib/fault-inject.c:149 fail_dump lib/fault-inject.c:45 stack_trace_save kernel/stacktrace.c:124 stack_trace_consume_entry kernel/stacktrace.c:86 stack_trace_consume_entry kernel/stacktrace.c:89 ... a hundred frames skipped ... stack_trace_consume_entry kernel/stacktrace.c:93 stack_trace_consume_entry kernel/stacktrace.c:86 Link: http://lkml.kernel.org/r/20200116111449.217744-1-dvyukov@gmail.com Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Mikhail Zaslonko
|
aa5b395b69 |
lib/zlib: add s390 hardware support for kernel zlib_deflate
Patch series "S390 hardware support for kernel zlib", v3. With IBM z15 mainframe the new DFLTCC instruction is available. It implements deflate algorithm in hardware (Nest Acceleration Unit - NXU) with estimated compression and decompression performance orders of magnitude faster than the current zlib. This patchset adds s390 hardware compression support to kernel zlib. The code is based on the userspace zlib implementation: https://github.com/madler/zlib/pull/410 The coding style is also preserved for future maintainability. There is only limited set of userspace zlib functions represented in kernel. Apart from that, all the memory allocation should be performed in advance. Thus, the workarea structures are extended with the parameter lists required for the DEFLATE CONVENTION CALL instruction. Since kernel zlib itself does not support gzip headers, only Adler-32 checksum is processed (also can be produced by DFLTCC facility). Like it was implemented for userspace, kernel zlib will compress in hardware on level 1, and in software on all other levels. Decompression will always happen in hardware (when enabled). Two DFLTCC compression calls produce the same results only when they both are made on machines of the same generation, and when the respective buffers have the same offset relative to the start of the page. Therefore care should be taken when using hardware compression when reproducible results are desired. However it does always produce the standard conform output which can be inflated anyway. The new kernel command line parameter 'dfltcc' is introduced to configure s390 zlib hardware support: Format: { on | off | def_only | inf_only | always } on: s390 zlib hardware support for compression on level 1 and decompression (default) off: No s390 zlib hardware support def_only: s390 zlib hardware support for deflate only (compression on level 1) inf_only: s390 zlib hardware support for inflate only (decompression) always: Same as 'on' but ignores the selected compression level always using hardware support (used for debugging) The main purpose of the integration of the NXU support into the kernel zlib is the use of hardware deflate in btrfs filesystem with on-the-fly compression enabled. Apart from that, hardware support can also be used during boot for decompressing the kernel or the ramdisk image With the patch for btrfs expanding zlib buffer from 1 to 4 pages (patch 6) the following performance results have been achieved using the ramdisk with btrfs. These are relative numbers based on throughput rate and compression ratio for zlib level 1: Input data Deflate rate Inflate rate Compression ratio NXU/Software NXU/Software NXU/Software stream of zeroes 1.46 1.02 1.00 random ASCII data 10.44 3.00 0.96 ASCII text (dickens) 6,21 3.33 0.94 binary data (vmlinux) 8,37 3.90 1.02 This means that s390 hardware deflate can provide up to 10 times faster compression (on level 1) and up to 4 times faster decompression (refers to all compression levels) for btrfs zlib. Disclaimer: Performance results are based on IBM internal tests using DD command-line utility on btrfs on a Fedora 30 based internal driver in native LPAR on a z15 system. Results may vary based on individual workload, configuration and software levels. This patch (of 9): Create zlib_dfltcc library with the s390 DEFLATE CONVERSION CALL implementation and related compression functions. Update zlib_deflate functions with the hooks for s390 hardware support and adjust workspace structures with extra parameter lists required for hardware deflate. Link: http://lkml.kernel.org/r/20200103223334.20669-2-zaslonko@linux.ibm.com Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Co-developed-by: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Chris Mason <clm@fb.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Sterba <dsterba@suse.com> Cc: Eduard Shishkin <edward6@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Ingo Molnar
|
7add7875a8 |
Merge branch 'kcsan.2020.01.07a' into locking/kcsan
Pull KCSAN updates from Paul E. McKenney: - UBSAN fixes - inlining updates - documentation updates Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Masami Hiramatsu
|
76db5a27a8 |
bootconfig: Add Extra Boot Config support
Extra Boot Config (XBC) allows admin to pass a tree-structured
boot configuration file when boot up the kernel. This extends
the kernel command line in an efficient way.
Boot config will contain some key-value commands, e.g.
key.word = value1
another.key.word = value2
It can fold same keys with braces, also you can write array
data. For example,
key {
word1 {
setting1 = data
setting2
}
word2.array = "val1", "val2"
}
User can access these key-value pair and tree structure via
SKC APIs.
Link: http://lkml.kernel.org/r/157867221257.17873.1775090991929862549.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
|
AKASHI Takahiro
|
c273a2bd8a |
libfdt: include fdt_addresses.c
In the implementation of kexec_file_loaded-based kdump for arm64, fdt_appendprop_addrrange() will be needed. So include fdt_addresses.c in making libfdt. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Signed-off-by: Will Deacon <will@kernel.org> |
|
|
Marco Elver
|
d47715f50e |
kcsan, ubsan: Make KCSAN+UBSAN work together
Context: http://lkml.kernel.org/r/fb7e25d8-aba4-3dcf-7761-cb7ecb3ebb71@infradead.org Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Marco Elver <elver@google.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Paul E. McKenney <paulmck@kernel.org> |
|
|
Ingo Molnar
|
28336be568 |
Linux 5.5-rc4
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl4JNtkeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGdN0H/3UI6LHOx1ol3/7L TwgMibg2pNxNU05bowDjQt92+Hgj9JM0TeFBsfr5hLaeKBgeVCPr5xK/vH09NlKu otVGbhBLpl9OAUu9znTfbt4bcqhJKlr/K0mS5e1vPsXvZ3wdHS27trwjgyu16/pP NJwkcs5/VRYVC/SrZay2NvheKN+DoGSd4+ZlJprwtAAVMdbEvoaGqRLGKLfLeDMc Z04w8AKhnKIxSkt+eEmuW9+pAQJUAkk4QVjixcJe8q0QpA1XIj965yvE8+XpjbLo eFxupmZq4S2JdCjsa+iBferJ5juR1FVhbHSbZtLsTtkPVegI9ug911WQ+KiCqErI VkiKUl8= =rNsn -----END PGP SIGNATURE----- Merge tag 'v5.5-rc4' into locking/kcsan, to resolve conflicts Conflicts: init/main.c lib/Kconfig.debug Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Linus Torvalds
|
ec939e4c94 |
ARM: SoC-related driver updates
Various driver updates for platforms:
- A larger set of work on Tegra 2/3 around memory controller and
regulator features, some fuse cleanups, etc..
- MMP platform drivers, in particular for USB PHY, and other smaller
additions.
- Samsung Exynos 5422 driver for DMC (dynamic memory configuration),
and ASV (adaptive voltage), allowing the platform to run at more
optimal operating points.
- Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas
- Clock/reset control driver for TI/OMAP
- Meson-A1 reset controller support
- Qualcomm sdm845 and sda845 SoC IDs for socinfo
-----BEGIN PGP SIGNATURE-----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=dk7w
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Olof Johansson:
"Various driver updates for platforms:
- A larger set of work on Tegra 2/3 around memory controller and
regulator features, some fuse cleanups, etc..
- MMP platform drivers, in particular for USB PHY, and other smaller
additions.
- Samsung Exynos 5422 driver for DMC (dynamic memory configuration),
and ASV (adaptive voltage), allowing the platform to run at more
optimal operating points.
- Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas
- Clock/reset control driver for TI/OMAP
- Meson-A1 reset controller support
- Qualcomm sdm845 and sda845 SoC IDs for socinfo"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (150 commits)
firmware: arm_scmi: Fix doorbell ring logic for !CONFIG_64BIT
soc: fsl: add RCPM driver
dt-bindings: fsl: rcpm: Add 'little-endian' and update Chassis definition
memory: tegra: Consolidate registers definition into common header
memory: tegra: Ensure timing control debug features are disabled
memory: tegra: Introduce Tegra30 EMC driver
memory: tegra: Do not handle error from wait_for_completion_timeout()
memory: tegra: Increase handshake timeout on Tegra20
memory: tegra: Print a brief info message about EMC timings
memory: tegra: Pre-configure debug register on Tegra20
memory: tegra: Include io.h instead of iopoll.h
memory: tegra: Adapt for Tegra20 clock driver changes
memory: tegra: Don't set EMC rate to maximum on probe for Tegra20
memory: tegra: Add gr2d and gr3d to DRM IOMMU group
memory: tegra: Set DMA mask based on supported address bits
soc: at91: Add Atmel SFR SN (Serial Number) support
memory: atmel-ebi: switch to SPDX license identifiers
memory: atmel-ebi: move NUM_CS definition inside EBI driver
soc: mediatek: Refactor bus protection control
soc: mediatek: Refactor sram control
...
|
|
|
Linus Torvalds
|
6e9f879684 |
ACPI updates for 5.5-rc1
- Update the ACPICA code in the kernel to upstream revision 20191018
including:
* Fixes for Clang warnings (Bob Moore).
* Fix for possible overflow in get_tick_count() (Bob Moore).
* Introduction of acpi_unload_table() (Bob Moore).
* Debugger and utilities updates (Erik Schmauss).
* Fix for unloading tables loaded via configfs (Nikolaus Voss).
- Add support for EFI specific purpose memory to optionally allow
either application-exclusive or core-kernel-mm managed access to
differentiated memory (Dan Williams).
- Fix and clean up processing of the HMAT table (Brice Goglin,
Qian Cai, Tao Xu).
- Update the ACPI EC driver to make it work on systems with
hardware-reduced ACPI (Daniel Drake).
- Always build in support for the Generic Event Device (GED) to
allow one kernel binary to work both on systems with full
hardware ACPI and hardware-reduced ACPI (Arjan van de Ven).
- Fix the table unload mechanism to unregister platform devices
created when the given table was loaded (Andy Shevchenko).
- Rework the lid blacklist handling in the button driver and add
more lid quirks to it (Hans de Goede).
- Improve ACPI-based device enumeration for some platforms based
on Intel BayTrail SoCs (Hans de Goede).
- Add an OpRegion driver for the Cherry Trail Crystal Cove PMIC
and prevent handlers from being registered for unhandled PMIC
OpRegions (Hans de Goede).
- Unify ACPI _HID/_UID matching (Andy Shevchenko).
- Clean up documentation and comments (Cao jin, James Pack, Kacper
Piwiński).
-----BEGIN PGP SIGNATURE-----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=7Cqr
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream revision
20191018, add support for EFI specific purpose memory, update the ACPI
EC driver to make it work on systems with hardware-reduced ACPI,
improve ACPI-based device enumeration for some platforms, rework the
lid blacklist handling in the button driver and add more lid quirks to
it, unify ACPI _HID/_UID matching, fix assorted issues and clean up
the code and documentation.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20191018
including:
* Fixes for Clang warnings (Bob Moore)
* Fix for possible overflow in get_tick_count() (Bob Moore)
* Introduction of acpi_unload_table() (Bob Moore)
* Debugger and utilities updates (Erik Schmauss)
* Fix for unloading tables loaded via configfs (Nikolaus Voss)
- Add support for EFI specific purpose memory to optionally allow
either application-exclusive or core-kernel-mm managed access to
differentiated memory (Dan Williams)
- Fix and clean up processing of the HMAT table (Brice Goglin, Qian
Cai, Tao Xu)
- Update the ACPI EC driver to make it work on systems with
hardware-reduced ACPI (Daniel Drake)
- Always build in support for the Generic Event Device (GED) to allow
one kernel binary to work both on systems with full hardware ACPI
and hardware-reduced ACPI (Arjan van de Ven)
- Fix the table unload mechanism to unregister platform devices
created when the given table was loaded (Andy Shevchenko)
- Rework the lid blacklist handling in the button driver and add more
lid quirks to it (Hans de Goede)
- Improve ACPI-based device enumeration for some platforms based on
Intel BayTrail SoCs (Hans de Goede)
- Add an OpRegion driver for the Cherry Trail Crystal Cove PMIC and
prevent handlers from being registered for unhandled PMIC OpRegions
(Hans de Goede)
- Unify ACPI _HID/_UID matching (Andy Shevchenko)
- Clean up documentation and comments (Cao jin, James Pack, Kacper
Piwiński)"
* tag 'acpi-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (52 commits)
ACPI: OSI: Shoot duplicate word
ACPI: HMAT: use %u instead of %d to print u32 values
ACPI: NUMA: HMAT: fix a section mismatch
ACPI: HMAT: don't mix pxm and nid when setting memory target processor_pxm
ACPI: NUMA: HMAT: Register "soft reserved" memory as an "hmem" device
ACPI: NUMA: HMAT: Register HMAT at device_initcall level
device-dax: Add a driver for "hmem" devices
dax: Fix alloc_dax_region() compile warning
lib: Uplevel the pmem "region" ida to a global allocator
x86/efi: Add efi_fake_mem support for EFI_MEMORY_SP
arm/efi: EFI soft reservation to memblock
x86/efi: EFI soft reservation to E820 enumeration
efi: Common enable/disable infrastructure for EFI soft reservation
x86/efi: Push EFI_MEMMAP check into leaf routines
efi: Enumerate EFI_MEMORY_SP
ACPI: NUMA: Establish a new drivers/acpi/numa/ directory
ACPICA: Update version to 20191018
ACPICA: debugger: remove leading whitespaces when converting a string to a buffer
ACPICA: acpiexec: initialize all simple types and field units from user input
ACPICA: debugger: add field unit support for acpi_db_get_next_token
...
|
|
|
Linus Torvalds
|
642356cb5f |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add library interfaces of certain crypto algorithms for WireGuard
- Remove the obsolete ablkcipher and blkcipher interfaces
- Move add_early_randomness() out of rng_mutex
Algorithms:
- Add blake2b shash algorithm
- Add blake2s shash algorithm
- Add curve25519 kpp algorithm
- Implement 4 way interleave in arm64/gcm-ce
- Implement ciphertext stealing in powerpc/spe-xts
- Add Eric Biggers's scalar accelerated ChaCha code for ARM
- Add accelerated 32r2 code from Zinc for MIPS
- Add OpenSSL/CRYPTOGRAMS poly1305 implementation for ARM and MIPS
Drivers:
- Fix entropy reading failures in ks-sa
- Add support for sam9x60 in atmel
- Add crypto accelerator for amlogic GXL
- Add sun8i-ce Crypto Engine
- Add sun8i-ss cryptographic offloader
- Add a host of algorithms to inside-secure
- Add NPCM RNG driver
- add HiSilicon HPRE accelerator
- Add HiSilicon TRNG driver"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (285 commits)
crypto: vmx - Avoid weird build failures
crypto: lib/chacha20poly1305 - use chacha20_crypt()
crypto: x86/chacha - only unregister algorithms if registered
crypto: chacha_generic - remove unnecessary setkey() functions
crypto: amlogic - enable working on big endian kernel
crypto: sun8i-ce - enable working on big endian
crypto: mips/chacha - select CRYPTO_SKCIPHER, not CRYPTO_BLKCIPHER
hwrng: ks-sa - Enable COMPILE_TEST
crypto: essiv - remove redundant null pointer check before kfree
crypto: atmel-aes - Change data type for "lastc" buffer
crypto: atmel-tdes - Set the IV after {en,de}crypt
crypto: sun4i-ss - fix big endian issues
crypto: sun4i-ss - hide the Invalid keylen message
crypto: sun4i-ss - use crypto_ahash_digestsize
crypto: sun4i-ss - remove dependency on not 64BIT
crypto: sun4i-ss - Fix 64-bit size_t warnings on sun4i-ss-hash.c
MAINTAINERS: Add maintainer for HiSilicon SEC V2 driver
crypto: hisilicon - add DebugFS for HiSilicon SEC
Documentation: add DebugFS doc for HiSilicon SEC
crypto: hisilicon - add SRIOV for HiSilicon SEC
...
|