Commit Graph

796711 Commits

Author SHA1 Message Date
Changwei Ge 9e98578775 ocfs2: don't use iocb when EIOCBQUEUED returns
When -EIOCBQUEUED returns, it means that aio_complete() will be called
from dio_complete(), which is an asynchronous progress against
write_iter.  Generally, IO is a very slow progress than executing
instruction, but we still can't take the risk to access a freed iocb.

And we do face a BUG crash issue.  Using the crash tool, iocb is
obviously freed already.

  crash> struct -x kiocb ffff881a350f5900
  struct kiocb {
    ki_filp = 0xffff881a350f5a80,
    ki_pos = 0x0,
    ki_complete = 0x0,
    private = 0x0,
    ki_flags = 0x0
  }

And the backtrace shows:
  ocfs2_file_write_iter+0xcaa/0xd00 [ocfs2]
  aio_run_iocb+0x229/0x2f0
  do_io_submit+0x291/0x540
  SyS_io_submit+0x10/0x20
  system_call_fastpath+0x16/0x75

Link: http://lkml.kernel.org/r/1523361653-14439-1-git-send-email-ge.changwei@h3c.com
Signed-off-by: Changwei Ge <ge.changwei@h3c.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-03 10:09:37 -07:00
Guozhonghua 21158ca85b ocfs2: without quota support, avoid calling quota recovery
During one dead node's recovery by other node, quota recovery work will
be queued.  We should avoid calling quota when it is not supported, so
check the quota flags.

Link: http://lkml.kernel.org/r/71604351584F6A4EBAE558C676F37CA401071AC9FB@H3CMLB12-EX.srv.huawei-3com.com
Signed-off-by: guozhonghua <guozhonghua@h3c.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-03 10:09:37 -07:00
Gang He a634644751 ocfs2: remove ocfs2_is_o2cb_active()
Remove ocfs2_is_o2cb_active().  We have similar functions to identify
which cluster stack is being used via osb->osb_cluster_stack.

Secondly, the current implementation of ocfs2_is_o2cb_active() is not
totally safe.  Based on the design of stackglue, we need to get
ocfs2_stack_lock before using ocfs2_stack related data structures, and
that active_stack pointer can be NULL in the case of mount failure.

Link: http://lkml.kernel.org/r/1495441079-11708-1-git-send-email-ghe@suse.com
Signed-off-by: Gang He <ghe@suse.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Reviewed-by: Eric Ren <zren@suse.com>
Acked-by: Changwei Ge <ge.changwei@h3c.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-03 10:09:37 -07:00
Andrea Arcangeli ac5b2c1891 mm: thp: relax __GFP_THISNODE for MADV_HUGEPAGE mappings
THP allocation might be really disruptive when allocated on NUMA system
with the local node full or hard to reclaim.  Stefan has posted an
allocation stall report on 4.12 based SLES kernel which suggests the
same issue:

  kvm: page allocation stalls for 194572ms, order:9, mode:0x4740ca(__GFP_HIGHMEM|__GFP_IO|__GFP_FS|__GFP_COMP|__GFP_NOMEMALLOC|__GFP_HARDWALL|__GFP_THISNODE|__GFP_MOVABLE|__GFP_DIRECT_RECLAIM), nodemask=(null)
  kvm cpuset=/ mems_allowed=0-1
  CPU: 10 PID: 84752 Comm: kvm Tainted: G        W 4.12.0+98-ph <a href="/view.php?id=1" title="[geschlossen] Integration Ramdisk" class="resolved">0000001</a> SLE15 (unreleased)
  Hardware name: Supermicro SYS-1029P-WTRT/X11DDW-NT, BIOS 2.0 12/05/2017
  Call Trace:
   dump_stack+0x5c/0x84
   warn_alloc+0xe0/0x180
   __alloc_pages_slowpath+0x820/0xc90
   __alloc_pages_nodemask+0x1cc/0x210
   alloc_pages_vma+0x1e5/0x280
   do_huge_pmd_wp_page+0x83f/0xf00
   __handle_mm_fault+0x93d/0x1060
   handle_mm_fault+0xc6/0x1b0
   __do_page_fault+0x230/0x430
   do_page_fault+0x2a/0x70
   page_fault+0x7b/0x80
   [...]
  Mem-Info:
  active_anon:126315487 inactive_anon:1612476 isolated_anon:5
   active_file:60183 inactive_file:245285 isolated_file:0
   unevictable:15657 dirty:286 writeback:1 unstable:0
   slab_reclaimable:75543 slab_unreclaimable:2509111
   mapped:81814 shmem:31764 pagetables:370616 bounce:0
   free:32294031 free_pcp:6233 free_cma:0
  Node 0 active_anon:254680388kB inactive_anon:1112760kB active_file:240648kB inactive_file:981168kB unevictable:13368kB isolated(anon):0kB isolated(file):0kB mapped:280240kB dirty:1144kB writeback:0kB shmem:95832kB shmem_thp: 0kB shmem_pmdmapped: 0kB anon_thp: 81225728kB writeback_tmp:0kB unstable:0kB all_unreclaimable? no
  Node 1 active_anon:250583072kB inactive_anon:5337144kB active_file:84kB inactive_file:0kB unevictable:49260kB isolated(anon):20kB isolated(file):0kB mapped:47016kB dirty:0kB writeback:4kB shmem:31224kB shmem_thp: 0kB shmem_pmdmapped: 0kB anon_thp: 31897600kB writeback_tmp:0kB unstable:0kB all_unreclaimable? no

The defrag mode is "madvise" and from the above report it is clear that
the THP has been allocated for MADV_HUGEPAGA vma.

Andrea has identified that the main source of the problem is
__GFP_THISNODE usage:

: The problem is that direct compaction combined with the NUMA
: __GFP_THISNODE logic in mempolicy.c is telling reclaim to swap very
: hard the local node, instead of failing the allocation if there's no
: THP available in the local node.
:
: Such logic was ok until __GFP_THISNODE was added to the THP allocation
: path even with MPOL_DEFAULT.
:
: The idea behind the __GFP_THISNODE addition, is that it is better to
: provide local memory in PAGE_SIZE units than to use remote NUMA THP
: backed memory. That largely depends on the remote latency though, on
: threadrippers for example the overhead is relatively low in my
: experience.
:
: The combination of __GFP_THISNODE and __GFP_DIRECT_RECLAIM results in
: extremely slow qemu startup with vfio, if the VM is larger than the
: size of one host NUMA node. This is because it will try very hard to
: unsuccessfully swapout get_user_pages pinned pages as result of the
: __GFP_THISNODE being set, instead of falling back to PAGE_SIZE
: allocations and instead of trying to allocate THP on other nodes (it
: would be even worse without vfio type1 GUP pins of course, except it'd
: be swapping heavily instead).

Fix this by removing __GFP_THISNODE for THP requests which are
requesting the direct reclaim.  This effectivelly reverts 5265047ac3
on the grounds that the zone/node reclaim was known to be disruptive due
to premature reclaim when there was memory free.  While it made sense at
the time for HPC workloads without NUMA awareness on rare machines, it
was ultimately harmful in the majority of cases.  The existing behaviour
is similar, if not as widespare as it applies to a corner case but
crucially, it cannot be tuned around like zone_reclaim_mode can.  The
default behaviour should always be to cause the least harm for the
common case.

If there are specialised use cases out there that want zone_reclaim_mode
in specific cases, then it can be built on top.  Longterm we should
consider a memory policy which allows for the node reclaim like behavior
for the specific memory ranges which would allow a

[1] http://lkml.kernel.org/r/20180820032204.9591-1-aarcange@redhat.com

Mel said:

: Both patches look correct to me but I'm responding to this one because
: it's the fix.  The change makes sense and moves further away from the
: severe stalling behaviour we used to see with both THP and zone reclaim
: mode.
:
: I put together a basic experiment with usemem configured to reference a
: buffer multiple times that is 80% the size of main memory on a 2-socket
: box with symmetric node sizes and defrag set to "always".  The defrag
: setting is not the default but it would be functionally similar to
: accessing a buffer with madvise(MADV_HUGEPAGE).  Usemem is configured to
: reference the buffer multiple times and while it's not an interesting
: workload, it would be expected to complete reasonably quickly as it fits
: within memory.  The results were;
:
: usemem
:                                   vanilla           noreclaim-v1
: Amean     Elapsd-1       42.78 (   0.00%)       26.87 (  37.18%)
: Amean     Elapsd-3       27.55 (   0.00%)        7.44 (  73.00%)
: Amean     Elapsd-4        5.72 (   0.00%)        5.69 (   0.45%)
:
: This shows the elapsed time in seconds for 1 thread, 3 threads and 4
: threads referencing buffers 80% the size of memory.  With the patches
: applied, it's 37.18% faster for the single thread and 73% faster with two
: threads.  Note that 4 threads showing little difference does not indicate
: the problem is related to thread counts.  It's simply the case that 4
: threads gets spread so their workload mostly fits in one node.
:
: The overall view from /proc/vmstats is more startling
:
:                          4.19.0-rc1  4.19.0-rc1
:                             vanillanoreclaim-v1r1
: Minor Faults               35593425      708164
: Major Faults                 484088          36
: Swap Ins                    3772837           0
: Swap Outs                   3932295           0
:
: Massive amounts of swap in/out without the patch
:
: Direct pages scanned        6013214           0
: Kswapd pages scanned              0           0
: Kswapd pages reclaimed            0           0
: Direct pages reclaimed      4033009           0
:
: Lots of reclaim activity without the patch
:
: Kswapd efficiency              100%        100%
: Kswapd velocity               0.000       0.000
: Direct efficiency               67%        100%
: Direct velocity           11191.956       0.000
:
: Mostly from direct reclaim context as you'd expect without the patch.
:
: Page writes by reclaim  3932314.000       0.000
: Page writes file                 19           0
: Page writes anon            3932295           0
: Page reclaim immediate        42336           0
:
: Writes from reclaim context is never good but the patch eliminates it.
:
: We should never have default behaviour to thrash the system for such a
: basic workload.  If zone reclaim mode behaviour is ever desired but on a
: single task instead of a global basis then the sensible option is to build
: a mempolicy that enforces that behaviour.

This was a severe regression compared to previous kernels that made
important workloads unusable and it starts when __GFP_THISNODE was
added to THP allocations under MADV_HUGEPAGE.  It is not a significant
risk to go to the previous behavior before __GFP_THISNODE was added, it
worked like that for years.

This was simply an optimization to some lucky workloads that can fit in
a single node, but it ended up breaking the VM for others that can't
possibly fit in a single node, so going back is safe.

[mhocko@suse.com: rewrote the changelog based on the one from Andrea]
Link: http://lkml.kernel.org/r/20180925120326.24392-2-mhocko@kernel.org
Fixes: 5265047ac3 ("mm, thp: really limit transparent hugepage allocation to local node")
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Stefan Priebe <s.priebe@profihost.ag>
Debugged-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Mel Gorman <mgorman@techsingularity.net>
Tested-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: <stable@vger.kernel.org>	[4.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-03 10:09:37 -07:00
Sam Protsenko 94e297c50b include/linux/notifier.h: SRCU: fix ctags
ctags indexing ("make tags" command) throws this warning:

    ctags: Warning: include/linux/notifier.h:125:
    null expansion of name pattern "\1"

This is the result of DEFINE_PER_CPU() macro expansion.  Fix that by
getting rid of line break.

Similar fix was already done in commit 25528213fe ("tags: Fix
DEFINE_PER_CPU expansions"), but this one probably wasn't noticed.

Link: http://lkml.kernel.org/r/20181030202808.28027-1-semen.protsenko@linaro.org
Fixes: 9c80172b90 ("kernel/SRCU: provide a static initializer")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-03 10:09:37 -07:00
Roman Gushchin e68599a3c3 mm: handle no memcg case in memcg_kmem_charge() properly
Mike Galbraith reported a regression caused by the commit 9b6f7e163c
("mm: rework memcg kernel stack accounting") on a system with
"cgroup_disable=memory" boot option: the system panics with the following
stack trace:

  BUG: unable to handle kernel NULL pointer dereference at 00000000000000f8
  PGD 0 P4D 0
  Oops: 0002 [#1] PREEMPT SMP PTI
  CPU: 0 PID: 1 Comm: systemd Not tainted 4.19.0-preempt+ #410
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20180531_142017-buildhw-08.phx2.fed4
  RIP: 0010:page_counter_try_charge+0x22/0xc0
  Code: 41 5d c3 c3 0f 1f 40 00 0f 1f 44 00 00 48 85 ff 0f 84 a7 00 00 00 41 56 48 89 f8 49 89 fe 49
  Call Trace:
   try_charge+0xcb/0x780
   memcg_kmem_charge_memcg+0x28/0x80
   memcg_kmem_charge+0x8b/0x1d0
   copy_process.part.41+0x1ca/0x2070
   _do_fork+0xd7/0x3d0
   do_syscall_64+0x5a/0x180
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

The problem occurs because get_mem_cgroup_from_current() returns the NULL
pointer if memory controller is disabled.  Let's check if this is a case
at the beginning of memcg_kmem_charge() and just return 0 if
mem_cgroup_disabled() returns true.  This is how we handle this case in
many other places in the memory controller code.

Link: http://lkml.kernel.org/r/20181029215123.17830-1-guro@fb.com
Fixes: 9b6f7e163c ("mm: rework memcg kernel stack accounting")
Signed-off-by: Roman Gushchin <guro@fb.com>
Reported-by: Mike Galbraith <efault@gmx.de>
Acked-by: Rik van Riel <riel@surriel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-03 10:09:37 -07:00
Vasily Khoruzhick f393808dc6 netfilter: conntrack: fix calculation of next bucket number in early_drop
If there's no entry to drop in bucket that corresponds to the hash,
early_drop() should look for it in other buckets. But since it increments
hash instead of bucket number, it actually looks in the same bucket 8
times: hsize is 16k by default (14 bits) and hash is 32-bit value, so
reciprocal_scale(hash, hsize) returns the same value for hash..hash+7 in
most cases.

Fix it by increasing bucket number instead of hash and rename _hash
to bucket to avoid future confusion.

Fixes: 3e86638e9a ("netfilter: conntrack: consider ct netns in early_drop logic")
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Vasily Khoruzhick <vasilykh@arista.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-11-03 14:16:28 +01:00
Florian Westphal e4844c9c62 netfilter: nft_compat: ebtables 'nat' table is normal chain type
Unlike ip(6)tables, the ebtables nat table has no special properties.
This bug causes 'ebtables -A' to fail when using a target such as
'snat' (ebt_snat target sets ".table = "nat"').  Targets that have
no table restrictions work fine.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-11-03 13:28:03 +01:00
Pablo Neira Ayuso 8866df9264 netfilter: nfnetlink_cttimeout: pass default timeout policy to obj_to_nlattr
Otherwise, we hit a NULL pointer deference since handlers always assume
default timeout policy is passed.

  netlink: 24 bytes leftover after parsing attributes in process `syz-executor2'.
  kasan: CONFIG_KASAN_INLINE enabled
  kasan: GPF could be caused by NULL-ptr deref or user memory access
  general protection fault: 0000 [#1] PREEMPT SMP KASAN
  CPU: 0 PID: 9575 Comm: syz-executor1 Not tainted 4.19.0+ #312
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  RIP: 0010:icmp_timeout_obj_to_nlattr+0x77/0x170 net/netfilter/nf_conntrack_proto_icmp.c:297

Fixes: c779e84960 ("netfilter: conntrack: remove get_timeout() indirection")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-11-03 13:28:03 +01:00
Pablo Neira Ayuso a95a7774d5 netfilter: conntrack: add nf_{tcp,udp,sctp,icmp,dccp,icmpv6,generic}_pernet()
Expose these functions to access conntrack protocol tracker netns area,
nfnetlink_cttimeout needs this.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-11-03 13:28:02 +01:00
Jozsef Kadlecsik 8a02bdd50b netfilter: ipset: Fix calling ip_set() macro at dumping
The ip_set() macro is called when either ip_set_ref_lock held only
or no lock/nfnl mutex is held at dumping. Take this into account
properly. Also, use Pablo's suggestion to use rcu_dereference_raw(),
the ref_netlink protects the set.

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-11-03 13:28:01 +01:00
Taehee Yoo 54451f60c8 netfilter: xt_IDLETIMER: add sysfs filename checking routine
When IDLETIMER rule is added, sysfs file is created under
/sys/class/xt_idletimer/timers/
But some label name shouldn't be used.
".", "..", "power", "uevent", "subsystem", etc...
So that sysfs filename checking routine is needed.

test commands:
   %iptables -I INPUT -j IDLETIMER --timeout 1 --label "power"

splat looks like:
[95765.423132] sysfs: cannot create duplicate filename '/devices/virtual/xt_idletimer/timers/power'
[95765.433418] CPU: 0 PID: 8446 Comm: iptables Not tainted 4.19.0-rc6+ #20
[95765.449755] Call Trace:
[95765.449755]  dump_stack+0xc9/0x16b
[95765.449755]  ? show_regs_print_info+0x5/0x5
[95765.449755]  sysfs_warn_dup+0x74/0x90
[95765.449755]  sysfs_add_file_mode_ns+0x352/0x500
[95765.449755]  sysfs_create_file_ns+0x179/0x270
[95765.449755]  ? sysfs_add_file_mode_ns+0x500/0x500
[95765.449755]  ? idletimer_tg_checkentry+0x3e5/0xb1b [xt_IDLETIMER]
[95765.449755]  ? rcu_read_lock_sched_held+0x114/0x130
[95765.449755]  ? __kmalloc_track_caller+0x211/0x2b0
[95765.449755]  ? memcpy+0x34/0x50
[95765.449755]  idletimer_tg_checkentry+0x4e2/0xb1b [xt_IDLETIMER]
[ ... ]

Fixes: 0902b469bd ("netfilter: xtables: idletimer target implementation")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-11-03 13:28:01 +01:00
Jozsef Kadlecsik 17b8b74c0f netfilter: ipset: Correct rcu_dereference() call in ip_set_put_comment()
The function is called when rcu_read_lock() is held and not
when rcu_read_lock_bh() is held.

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-11-03 13:27:50 +01:00
David S. Miller 265ad0632f Merge branch 'net-timeout-fixes-for-GENET-and-SYSTEMPORT'
Florian Fainelli says:

====================
net: timeout fixes for GENET and SYSTEMPORT

This patch series fixes occasional transmit timeout around the time
the system goes into suspend. GENET and SYSTEMPORT have nearly the same
logic in that regard and were both affected in the same way.

Please queue up for stable, thanks!
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03 00:03:40 -07:00
Florian Fainelli 7cb6a2a2c7 net: systemport: Protect stop from timeout
A timing hazard exists when the network interface is stopped that
allows a watchdog timeout to be processed by a separate core in
parallel. This creates the potential for the timeout handler to
wake the queues while the driver is shutting down, or access
registers after their clocks have been removed.

The more common case is that the watchdog timeout will produce a
warning message which doesn't lead to a crash. The chances of this
are greatly increased by the fact that bcm_sysport_netif_stop stops
the transmit queues which can easily precipitate a watchdog time-
out because of stale trans_start data in the queues.

This commit corrects the behavior by ensuring that the watchdog
timeout is disabled before enterring bcm_sysport_netif_stop. There
are currently only two users of the bcm_sysport_netif_stop function:
close and suspend.

The close case already handles the issue by exiting the RUNNING
state before invoking the driver close service.

The suspend case now performs the netif_device_detach to exit the
PRESENT state before the call to bcm_sysport_netif_stop rather than
after it.

These behaviors prevent any future scheduling of the driver timeout
service during the window. The netif_tx_stop_all_queues function
in bcm_sysport_netif_stop is replaced with netif_tx_disable to ensure
synchronization with any transmit or timeout threads that may
already be executing on other cores.

For symmetry, the netif_device_attach call upon resume is moved to
after the call to bcm_sysport_netif_start. Since it wakes the transmit
queues it is not necessary to invoke netif_tx_start_all_queues from
bcm_sysport_netif_start so it is moved into the driver open service.

Fixes: 40755a0fce ("net: systemport: add suspend and resume support")
Fixes: 80105befdb ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03 00:03:40 -07:00
Doug Berger 09e805d257 net: bcmgenet: protect stop from timeout
A timing hazard exists when the network interface is stopped that
allows a watchdog timeout to be processed by a separate core in
parallel. This creates the potential for the timeout handler to
wake the queues while the driver is shutting down, or access
registers after their clocks have been removed.

The more common case is that the watchdog timeout will produce a
warning message which doesn't lead to a crash. The chances of this
are greatly increased by the fact that bcmgenet_netif_stop stops
the transmit queues which can easily precipitate a watchdog time-
out because of stale trans_start data in the queues.

This commit corrects the behavior by ensuring that the watchdog
timeout is disabled before enterring bcmgenet_netif_stop. There
are currently only two users of the bcmgenet_netif_stop function:
close and suspend.

The close case already handles the issue by exiting the RUNNING
state before invoking the driver close service.

The suspend case now performs the netif_device_detach to exit the
PRESENT state before the call to bcmgenet_netif_stop rather than
after it.

These behaviors prevent any future scheduling of the driver timeout
service during the window. The netif_tx_stop_all_queues function
in bcmgenet_netif_stop is replaced with netif_tx_disable to ensure
synchronization with any transmit or timeout threads that may
already be executing on other cores.

For symmetry, the netif_device_attach call upon resume is moved to
after the call to bcmgenet_netif_start. Since it wakes the transmit
queues it is not necessary to invoke netif_tx_start_all_queues from
bcmgenet_netif_start so it is moved into the driver open service.

Fixes: 1c1008c793 ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03 00:03:39 -07:00
David Howells c7e86acfce rxrpc: Fix lockup due to no error backoff after ack transmit error
If the network becomes (partially) unavailable, say by disabling IPv6, the
background ACK transmission routine can get itself into a tizzy by
proposing immediate ACK retransmission.  Since we're in the call event
processor, that happens immediately without returning to the workqueue
manager.

The condition should clear after a while when either the network comes back
or the call times out.

Fix this by:

 (1) When re-proposing an ACK on failed Tx, don't schedule it immediately.
     This will allow a certain amount of time to elapse before we try
     again.

 (2) Enforce a return to the workqueue manager after a certain number of
     iterations of the call processing loop.

 (3) Add a backoff delay that increases the delay on deferred ACKs by a
     jiffy per failed transmission to a limit of HZ.  The backoff delay is
     cleared on a successful return from kernel_sendmsg().

 (4) Cancel calls immediately if the opening sendmsg fails.  The layer
     above can arrange retransmission or rotate to another server.

Fixes: 248f219cb8 ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-02 23:59:26 -07:00
Tristram Ha 284fb78ed7 net: dsa: microchip: initialize mutex before use
Initialize mutex before use.  Avoid kernel complaint when
CONFIG_DEBUG_LOCK_ALLOC is enabled.

Fixes: b987e98e50 ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-02 23:56:34 -07:00
Jeff Barnhill 2384d02520 net/ipv6: Add anycast addresses to a global hashtable
icmp6_send() function is expensive on systems with a large number of
interfaces. Every time it’s called, it has to verify that the source
address does not correspond to an existing anycast address by looping
through every device and every anycast address on the device.  This can
result in significant delays for a CPU when there are a large number of
neighbors and ND timers are frequently timing out and calling
neigh_invalidate().

Add anycast addresses to a global hashtable to allow quick searching for
matching anycast addresses.  This is based on inet6_addr_lst in addrconf.c.

Signed-off-by: Jeff Barnhill <0xeffeff@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-02 23:54:56 -07:00
Frieder Schrempf 7b900ead6c usbnet: smsc95xx: disable carrier check while suspending
We need to make sure, that the carrier check polling is disabled
while suspending. Otherwise we can end up with usbnet_read_cmd()
being issued when only usbnet_read_cmd_nopm() is allowed. If this
happens, read operations lock up.

Fixes: d69d169493 ("usbnet: smsc95xx: fix link detection for disabled autonegotiation")
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Raghuram Chary J <RaghuramChary.Jallipalli@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-02 23:49:15 -07:00
Mathieu Malaterre 49682bfa1e net: document skb parameter in function 'skb_gso_size_check'
Remove kernel-doc warning:

  net/core/skbuff.c:4953: warning: Function parameter or member 'skb' not described in 'skb_gso_size_check'

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-02 23:34:37 -07:00
Olof Johansson 8008cc78d3 Fix for omap1 ams-delta irq
We need to use IRQ_NOTCONNECTED instead of -EINVAL for
 ams_delta_modem_ports irq.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAlvIw3IRHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXNdhhAAn/zKiWJlWJSdOp2cgO3YfTfxIBukW/7Y
 x9tNjVFYoxuTs280ONg0TcoXs3dC/5D+wybvM+S6AX0oLRpYCn1Yh+MJpqp7XlVE
 k7bRo8yXv596DLhSgCUc/h7dYWQwH9GsawV5zAEX7O/s42YJLi8gLkk6ziXwY6Vc
 CxWP0XtO/Qf8ROpWiMoSk0Uz6lAHBtch+Lm0NA2ndR8gZDq/ek/7sBire5r8YR9q
 HW/pRsCQiXULxlSdEN8C+Yg5eg2S32mCvIKOaoUrkqGjb/RLg6aMbF2ntwEG4NCs
 g1gYcmmGBkGfisZjH35xj6KjhWC6cPKiijVhJf8bRhqrprYcb5rycHyyube6Eooh
 O1DCxomNjvKGYSLsgSXM3IMk4AmnAounCV4yWX87L+Cj88te8l17hSPDR2vJgxk9
 1QjHokx2yl4eswqioOcTYlkNjqf1zAVk2sPin6gddyRanaOJjI798cfjPii20hXn
 BaEB3COEcYyuSaQx8umRkTFsTk6qd6kXgAcYmgHdUDffdQ4UVlPkHcsYHNE2db9D
 NFViYybFrR93MQMcDTwtkgEc5UXpyczdtGB6mENukYGhEQhjKgQH7OhKK4V6v0Mc
 zmxLtNqDqsNo5chGTL4KOMvoFZNhNA+Sb3dTwYnd27cEdTYalIO3rHcxXR/q2bQm
 JpkSZFsLI5c=
 =SgVo
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v4.20/omap1-fix-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Fix for omap1 ams-delta irq

We need to use IRQ_NOTCONNECTED instead of -EINVAL for
ams_delta_modem_ports irq.

* tag 'omap-for-v4.20/omap1-fix-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP1: ams-delta: Fix impossible .irq < 0

Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-02 22:31:40 -07:00
Alexandre Torgue 00a6a845c0 ARM: dts: stm32: update HASH1 dmas property on stm32mp157c
Remove unused parameter from HASH1 dmas property on stm32mp157c SoC.

Fixes: 1e726a40e0 ("ARM: dts: stm32: Add HASH support on stm32mp157c")
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
[Olof: Bug doesn't cause any harm, so shouldn't need stable backport]
Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-02 22:31:25 -07:00
Arnd Bergmann d4f79cb872 ARM: orion: avoid VLA in orion_mpp_conf
Testing randconfig builds found an instance of a VLA that was
missed when determining that we have removed them all:

arch/arm/plat-orion/mpp.c: In function 'orion_mpp_conf':
arch/arm/plat-orion/mpp.c:31:2: error: ISO C90 forbids variable length array 'mpp_ctrl' [-Werror=vla]

This one is fairly straightforward: we know what all three
callers are, and the maximum length is not very long.

Fixes: 68664695ae57 ("Makefile: Globally enable VLA warning")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-02 22:31:24 -07:00
Marc Zyngier 2cbfdf4df5 iov_iter: Fix 9p virtio breakage
When switching to the new iovec accessors, a negation got subtly
dropped, leading to 9p being remarkably broken (here with kvmtool):

[    7.430941] VFS: Mounted root (9p filesystem) on device 0:15.
[    7.432080] devtmpfs: mounted
[    7.432717] Freeing unused kernel memory: 1344K
[    7.433658] Run /virt/init as init process
  Warning: unable to translate guest address 0x7e00902ff000 to host
  Warning: unable to translate guest address 0x7e00902fefc0 to host
  Warning: unable to translate guest address 0x7e00902ff000 to host
  Warning: unable to translate guest address 0x7e008febef80 to host
  Warning: unable to translate guest address 0x7e008febf000 to host
  Warning: unable to translate guest address 0x7e008febef00 to host
  Warning: unable to translate guest address 0x7e008febf000 to host
[    7.436376] Kernel panic - not syncing: Requested init /virt/init failed (error -8).
[    7.437554] CPU: 29 PID: 1 Comm: swapper/0 Not tainted 4.19.0-rc8-02267-g00e23707442a #291
[    7.439006] Hardware name: linux,dummy-virt (DT)
[    7.439902] Call trace:
[    7.440387]  dump_backtrace+0x0/0x148
[    7.441104]  show_stack+0x14/0x20
[    7.441768]  dump_stack+0x90/0xb4
[    7.442425]  panic+0x120/0x27c
[    7.443036]  kernel_init+0xa4/0x100
[    7.443725]  ret_from_fork+0x10/0x18
[    7.444444] SMP: stopping secondary CPUs
[    7.445391] Kernel Offset: disabled
[    7.446169] CPU features: 0x0,23000438
[    7.446974] Memory Limit: none
[    7.447645] ---[ end Kernel panic - not syncing: Requested init /virt/init failed (error -8). ]---

Restoring the missing "!" brings the guest back to life.

Fixes: 00e2370744 ("iov_iter: Use accessor function")
Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-11-02 19:45:01 -04:00
Thomas Gleixner bff9a1076a Merge branch 'clockevents/4.20-rc1' of https://git.linaro.org/people/daniel.lezcano/linux into timers/urgent
Pull clockevent update from Daniel Lezcano:

 - Add the per cpu timer for the c-sky architecture (Guo Ren)

 - Add the global timer for the c-sky architecture (Guo Ren)
2018-11-02 21:58:39 +01:00
Daniel Borkmann 28c2fae726 bpf: fix bpf_prog_get_info_by_fd to return 0 func_lens for unpriv
While dbecd73884 ("bpf: get kernel symbol addresses via syscall")
zeroed info.nr_jited_ksyms in bpf_prog_get_info_by_fd() for queries
from unprivileged users, commit 815581c11c ("bpf: get JITed image
lengths of functions via syscall") forgot about doing so and therefore
returns the #elems of the user set up buffer which is incorrect. It
also needs to indicate a info.nr_jited_func_lens of zero.

Fixes: 815581c11c ("bpf: get JITed image lengths of functions via syscall")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Sandipan Das <sandipan@linux.vnet.ibm.com>
Cc: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-02 13:51:15 -07:00
Daniel Borkmann b0970f235f Merge branch 'bpf-accurate-prog-addr'
Song Liu says:

====================
Changes v1 -> v2:
1. Added main program length to bpf_prog_info->jited_fun_lens (3/3).
2. Updated commit message of 1/3 and 2/3 with more background about the
   address masking, and why it is still save after the changes.
3. Replace "ulong" with "unsigned long".

This set improves bpf program address showed in /proc/kallsyms and in
bpf_prog_info. First, real program address is showed instead of page
address. Second, when there is no subprogram, bpf_prog_info->jited_ksyms
and bpf_prog_info->jited_fun_lens returns the main prog address and
length.
====================

Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-11-02 21:39:03 +01:00
Song Liu ff1889fc53 bpf: show main program address and length in bpf_prog_info
Currently, when there is no subprog (prog->aux->func_cnt == 0),
bpf_prog_info does not return any jited_ksyms or jited_func_lens. This
patch adds main program address (prog->bpf_func) and main program
length (prog->jited_len) to bpf_prog_info.

Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-11-02 21:39:01 +01:00
Song Liu de57e99ceb bpf: show real jited address in bpf_prog_info->jited_ksyms
Currently, jited_ksyms in bpf_prog_info shows page addresses of jited
bpf program. The main reason here is to not expose randomized start
address. However, this is not ideal for detailed profiling (find hot
instructions from stack traces). This patch replaces the page address
with real prog start address.

This change is OK because bpf_prog_get_info_by_fd() is only available
to root.

Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-11-02 21:39:01 +01:00
Song Liu df0734702a bpf: show real jited prog address in /proc/kallsyms
Currently, /proc/kallsyms shows page address of jited bpf program. The
main reason here is to not expose randomized start address. However,
This is not ideal for detailed profiling (find hot instructions from
stack traces). This patch replaces the page address with real prog start
address.

This change is OK because these addresses are still protected by sysctl
kptr_restrict (see kallsyms_show_value()), and only programs loaded by
root are added to kallsyms (see bpf_prog_kallsyms_add()).

Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-11-02 21:39:01 +01:00
Steve French b98e26df07 cifs: fix signed/unsigned mismatch on aio_read patch
The patch "CIFS: Add support for direct I/O read" had
a signed/unsigned mismatch (ssize_t vs. size_t) in the
return from one function.  Similar trivial change
in aio_write

Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
2018-11-02 14:09:42 -05:00
Colin Ian King 8c6c9bed87 cifs: don't dereference smb_file_target before null check
There is a null check on dst_file->private data which suggests
it can be potentially null. However, before this check, pointer
smb_file_target is derived from dst_file->private and dereferenced
in the call to tlink_tcon, hence there is a potential null pointer
deference.

Fix this by assigning smb_file_target and target_tcon after the
null pointer sanity checks.

Detected by CoverityScan, CID#1475302 ("Dereference before null check")

Fixes: 04b38d6012 ("vfs: pull btrfs clone API to vfs layer")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2018-11-02 14:09:42 -05:00
Long Li be4eb68846 CIFS: Add direct I/O functions to file_operations
With direct read/write functions implemented, add them to file_operations.

Dircet I/O is used under two conditions:
1. When mounting with "cache=none", CIFS uses direct I/O for all user file
data transfer.
2. When opening a file with O_DIRECT, CIFS uses direct I/O for all data
transfer on this file.

Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-11-02 14:09:42 -05:00
Long Li 8c5f9c1ab7 CIFS: Add support for direct I/O write
With direct I/O write, user supplied buffers are pinned to the memory and data
are transferred directly from user buffers to the transport layer.

Change in v3: add support for kernel AIO

Change in v4:
Refactor common write code to __cifs_writev for direct and non-direct I/O.
Retry on direct I/O failure.

Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2018-11-02 14:09:42 -05:00
Long Li 6e6e2b86c2 CIFS: Add support for direct I/O read
With direct I/O read, we transfer the data directly from transport layer to
the user data buffer.

Change in v3: add support for kernel AIO

Change in v4:
Refactor common read code to __cifs_readv for direct and non-direct I/O.
Retry on direct I/O failure.

Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2018-11-02 14:09:41 -05:00
Steve French 0df444a00f smb3: missing defines and structs for reparse point handling
We were missing some structs from MS-FSCC relating to
reparse point handling.  Add them to protocol defines
in smb2pdu.h

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
2018-11-02 14:09:41 -05:00
Steve French dfe33f9abc smb3: allow more detailed protocol info on open files for debugging
In order to debug complex problems it is often helpful to
have detailed information on the client and server view
of the open file information.  Add the ability for root to
view the list of smb3 open files and dump the persistent
handle and other info so that it can be more easily
correlated with server logs.

Sample output from "cat /proc/fs/cifs/open_files"

 # Version:1
 # Format:
 # <tree id> <persistent fid> <flags> <count> <pid> <uid> <filename> <mid>
 0x5 0x800000378 0x8000 1 7704 0 some-file 0x14
 0xcb903c0c 0x84412e67 0x8000 1 7754 1001 rofile 0x1a6d
 0xcb903c0c 0x9526b767 0x8000 1 7720 1000 file 0x1a5b
 0xcb903c0c 0x9ce41a21 0x8000 1 7715 0 smallfile 0xd67

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-11-02 14:09:41 -05:00
Steve French 926674de67 smb3: on kerberos mount if server doesn't specify auth type use krb5
Some servers (e.g. Azure) do not include a spnego blob in the SMB3
negotiate protocol response, so on kerberos mounts ("sec=krb5")
we can fail, as we expected the server to list its supported
auth types (OIDs in the spnego blob in the negprot response).
Change this so that on krb5 mounts we default to trying krb5 if the
server doesn't list its supported protocol mechanisms.

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
2018-11-02 14:09:41 -05:00
Steve French f8af49dd17 smb3: add trace point for tree connection
In debugging certain scenarios, especially reconnect cases,
it can be helpful to have a dynamic trace point for the
result of tree connect.  See sample output below
from a reconnect event. The new event is 'smb3_tcon'

            TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
               | |       |   ||||       |         |
           cifsd-6071  [001] ....  2659.897923: smb3_reconnect: server=localhost current_mid=0xa
     kworker/1:1-71    [001] ....  2666.026342: smb3_cmd_done: 	sid=0x0 tid=0x0 cmd=0 mid=0
     kworker/1:1-71    [001] ....  2666.026576: smb3_cmd_err: 	sid=0xc49e1787 tid=0x0 cmd=1 mid=1 status=0xc0000016 rc=-5
     kworker/1:1-71    [001] ....  2666.031677: smb3_cmd_done: 	sid=0xc49e1787 tid=0x0 cmd=1 mid=2
     kworker/1:1-71    [001] ....  2666.031921: smb3_cmd_done: 	sid=0xc49e1787 tid=0x6e78f05f cmd=3 mid=3
     kworker/1:1-71    [001] ....  2666.031923: smb3_tcon: xid=0 sid=0xc49e1787 tid=0x0 unc_name=\\localhost\test rc=0
     kworker/1:1-71    [001] ....  2666.032097: smb3_cmd_done: 	sid=0xc49e1787 tid=0x6e78f05f cmd=11 mid=4
     kworker/1:1-71    [001] ....  2666.032265: smb3_cmd_done: 	sid=0xc49e1787 tid=0x7912332f cmd=3 mid=5
     kworker/1:1-71    [001] ....  2666.032266: smb3_tcon: xid=0 sid=0xc49e1787 tid=0x0 unc_name=\\localhost\IPC$ rc=0
     kworker/1:1-71    [001] ....  2666.032386: smb3_cmd_done: 	sid=0xc49e1787 tid=0x7912332f cmd=11 mid=6

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-11-02 14:09:41 -05:00
Colin Ian King 413d610081 cifs: fix spelling mistake, EACCESS -> EACCES
Trivial fix to a spelling mistake of the error access name EACCESS,
rename to EACCES

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2018-11-02 14:09:41 -05:00
Ronnie Sahlberg 0c5d6cb664 cifs: fix return value for cifs_listxattr
If the application buffer was too small to fit all the names
we would still count the number of bytes and return this for
listxattr. This would then trigger a BUG in usercopy.c

Fix the computation of the size so that we return -ERANGE
correctly when the buffer is too small.

This fixes the kernel BUG for xfstest generic/377

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
2018-11-02 14:09:41 -05:00
Guo Ren ab1e77c3f5 dt-bindings: timer: gx6605s SOC timer
Dt-bindings doc for gx6605s SOC's system timer.

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-11-02 19:41:50 +01:00
Guo Ren 33745c3cc5 clocksource/drivers/c-sky: Add gx6605s SOC system timer
The driver is for gx6605s SOC system timer and there are two
same timers in gx6605s. We use one for clkevt and another one for
clksrc.

The timer is mmio map to access, so we need give mmio address in dts.

The counter at 0x0  offset is clock event.
The counter at 0x40 offset is clock source.

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-11-02 19:41:12 +01:00
Guo Ren 732e5dca37 dt-bindings: timer: C-SKY Multi-processor timer
Dt-bingdings doc for C-SKY SMP system setting.

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-11-02 19:41:05 +01:00
Guo Ren a7ad38b0dd clocksource/drivers/c-sky: Add C-SKY SMP timer
The driver is for C-SKY SMP timer. It only supports oneshot event
and 32bit overflow for clocksource. Per cpu core has one timer and
all timers share one clock-counter-input from the same clocksource.

This use mfcr&mtcr instructions to access the regs.

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-11-02 19:39:54 +01:00
Linus Walleij 513eb98595 ARM: defconfig: Update multi_v7 to use PREEMPT
Using CONFIG_PREEMPT as preemption model for ARMv7 systems
appear to be the most reasonable default.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-02 11:39:52 -07:00
John Garry 7f3d08f525 arm64: defconfig: Enable some IPMI configs
The arm64 port now runs on servers which use IPMI. This patch enables
relevant core configs to save manually enabling them when testing
mainline.

Signed-off-by: John Garry <john.garry@huawei.com>
[olof: Switched to =m instead of =y]
Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-02 11:39:50 -07:00
Christoph Hellwig f62717551b arm64: fix warnings without CONFIG_IOMMU_DMA
__swiotlb_get_sgtable_page and __swiotlb_mmap_pfn are not only misnamed
but also only used if CONFIG_IOMMU_DMA is set.  Just add a simple ifdef
for now, given that we plan to remove them entirely for the next merge
window.

Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Will Deacon <will.deacon@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2018-11-02 19:27:22 +01:00
Linus Torvalds 5f21585384 for-linus-20181102
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAlvchGgQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpj/1D/4kEQx4ncnFoZk8QshHV1L++rH3BbcLjQDd
 Wbh9ZSIQdI/gHTzS6bE7x3YfcbpMWPMO3+jFawdfRiFTEjlF8vQ+mnJ+Btb3z4D6
 mGEeFGVhHExlp2a0x/Ma8YWVNlMB7BE8Tq73bZEVMY+9lbpmDW/vp7Sfa87LBDKQ
 ZmY+My+VdHN7qLtQ7t3W/HtpbU+kcXMMd3ICjK4i+ofXy6mynk4+oQ2jwyXc5L86
 UCJCsTsSRr3CgbnkW/uprHo0XHk8i7O/4C3oR+x4pAIxCCa9g+vmw0EO9fvi/2iQ
 qe8jKdm7Y09xu/TiPBa7iz45tdh0cNMJKo3OezmSF9Np+r69KL5C/U4GRPKN3Iwm
 keoqn14ScABkYMSe4ys1AdEgKD6bNUaW3r/lJxTH2oUR23mjnCLp7c4WD/G+MlbB
 CzoakQyCHTZmDFLr2Kc8bkjmpil2T2UFfmLIDAu30LWIYeSGpiIO/V+g1foJMF2f
 06ERltNvgX1BJjoh4NSWySLEf1ZtkUU60NeATRol6gwhnIyLrHsgfm6OEhqlW/7x
 Xc1BWyzX7K6c3Dskk/u5aSRyXOyRC9KkMt3/2XexeDNHkte9yMH0IgSvopPBuER8
 +iPvPjNp7ychTKZB3zpSnlqGgePTjbufIEBtO3OyUmDZKjUqxahtxkQfmPhoclu+
 XdR4ArcqNg==
 =0zM4
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20181102' of git://git.kernel.dk/linux-block

Pull block layer fixes from Jens Axboe:
 "The biggest part of this pull request is the revert of the blkcg
  cleanup series. It had one fix earlier for a stacked device issue, but
  another one was reported. Rather than play whack-a-mole with this,
  revert the entire series and try again for the next kernel release.

  Apart from that, only small fixes/changes.

  Summary:

   - Indentation fixup for mtip32xx (Colin Ian King)

   - The blkcg cleanup series revert (Dennis Zhou)

   - Two NVMe fixes. One fixing a regression in the nvme request
     initialization in this merge window, causing nvme-fc to not work.
     The other is a suspend/resume p2p resource issue (James, Keith)

   - Fix sg discard merge, allowing us to merge in cases where we didn't
     before (Jianchao Wang)

   - Call rq_qos_exit() after the queue is frozen, preventing a hang
     (Ming)

   - Fix brd queue setup, fixing an oops if we fail setting up all
     devices (Ming)"

* tag 'for-linus-20181102' of git://git.kernel.dk/linux-block:
  nvme-pci: fix conflicting p2p resource adds
  nvme-fc: fix request private initialization
  blkcg: revert blkcg cleanups series
  block: brd: associate with queue until adding disk
  block: call rq_qos_exit() after queue is frozen
  mtip32xx: clean an indentation issue, remove extraneous tabs
  block: fix the DISCARD request merge
2018-11-02 11:25:48 -07:00