The messenger fault was clearing the BUSY bit, for reasons unclear. This
made it possible for the con->ops->fault function to reopen the connection,
and requeue work in the workqueue--even though the current thread was
already in con_work.
This avoids a problem where the client busy loops with connection failures
on an unreachable OSD, but doesn't address the root cause of that problem.
Signed-off-by: Sage Weil <sage@newdream.net>
Prevent duplicate 'mds0 caps stale' message from spamming the console every
few seconds while the MDS restarts. Set s_renew_requested earlier, so that
we only print the message once, even if we don't send an actual request.
Signed-off-by: Sage Weil <sage@newdream.net>
The incremental map decoding of pg pool updates wasn't skipping
the snaps and removed_snaps vectors. This caused osd requests
to stall when pool snapshots were created or fs snapshots were
deleted. Use a common helper for full and incremental map
decoders that decodes pools properly.
Signed-off-by: Sage Weil <sage@newdream.net>
The wait_unsafe_requests() helper dropped the mdsc mutex to wait
for each request to complete, and then examined r_node to get the
next request after retaking the lock. But the request completion
removes the request from the tree, so r_node was always undefined
at this point. Since it's a small race, it usually led to a
valid request, but not always. The result was an occasional
crash in rb_next() while dereferencing node->rb_left.
Fix this by clearing the rb_node when removing the request from
the request tree, and not walking off into the weeds when we
are done waiting for a request. Since the request we waited on
will _always_ be out of the request tree, take a ref on the next
request, in the hopes that it won't be. But if it is, it's ok:
we can start over from the beginning (and traverse over older read
requests again).
Signed-off-by: Sage Weil <sage@newdream.net>
We were releasing used caps (e.g. FILE_CACHE) from encode_inode_release
with MDS requests (e.g. setattr). We don't carry refs on most caps, so
this code worked most of the time, but for setattr (utimes) we try to
drop Fscr.
This causes cap state to get slightly out of sync with reality, and may
result in subsequent mds revoke messages getting ignored.
Fix by only releasing unused caps.
Signed-off-by: Sage Weil <sage@newdream.net>
Drop session mutex unconditionally in handle_cap_grant, and do the
check_caps from the handle_cap_grant helper. This avoids using a magic
return value.
Also avoid using a flag variable in the IMPORT case and call
check_caps at the appropriate point.
Signed-off-by: Sage Weil <sage@newdream.net>
Passing a session pointer to ceph_check_caps() used to mean it would leave
the session mutex locked. That wasn't always possible if it wasn't passed
CHECK_CAPS_AUTHONLY. If could unlock the passed session and lock a
differet session mutex, which was clearly wrong, and also emitted a
warning when it a racing CPU retook it and we did an unlock from the wrong
context.
This was only a problem when there was more than one MDS.
First, make ceph_check_caps unconditionally drop the session mutex, so that
it is free to lock other sessions as needed. Then adjust the one caller
that passes in a session (handle_cap_grant) accordingly.
Signed-off-by: Sage Weil <sage@newdream.net>
This causes an oops when debug output is enabled and we kick
an osd request with no current r_osd (sometime after an osd
failure). Check the pointer before dereferencing.
Signed-off-by: Sage Weil <sage@newdream.net>
Previously we would decode state directly into our current ticket_handler.
This is problematic if for some reason we fail to decode, because we end
up with half new state and half old state.
We are probably already in bad shape if we get an update we can't decode,
but we may as well be tidy anyway. Decode into new_* temporaries and
update the ticket_handler only on success.
Signed-off-by: Sage Weil <sage@newdream.net>
Commit 27943620cb introduced spurious
IRQ handling but it has a race condition where valid completion can be
lost while trying to clear spurious IRQ leading to occassional command
timeouts.
This patch improves SFF interrupt handler such that
1. Once BMDMA HSM is stopped, the condition is never considered
spurious. As there's no way to resume stopped BMDMA HSM, if device
status doesn't agree with BMDMA status, the only way out is
aborting the command (otherwise, it will just end up timing out).
2. ap->ops->sff_check_status() can be safely called to clear spurious
device IRQ as it atomically returns completion status but BMDMA IRQ
status can't be cleared in safe way if command is in flight. After
a spurious IRQ, call ap->ops->sff_irq_clear() only if the
respective device is idle and retry completion if
sff_check_status() indicates command completion.
Please note that ata_piix uses bmdma_status for sff_irq_check() and #2
won't weaken spurious IRQ handling even with in-flight command because
if bmdma_status indicates IRQ pending but device status is not on
spurious check, the next IRQ handler invocation will abort the command
due to #1.
This fixes bko#15537.
https://bugzilla.kernel.org/show_bug.cgi?id=15537
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andrew Benton <b3nton@gmail.com>
Cc: Petr Uzel <petr.uzel@centrum.cz>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
The parent rb_node needs to be initialized to shut up the compiler, even
though we're unlikely to ever hit this issue at run time.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
select_idle_routine() and register_sh_pmu() both needed their annotations
fixed up to silence section mismatch warnings.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
set_pmb_entry() is now only used by a function that is wrapped in #ifdef
CONFIG_PM, so wrap set_pmb_entry() in CONFIG_PM too.
Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Setting the TI in MMUCR causes all the TLB bits in MMUCR to be
cleared. Unfortunately, the TLB wired bits are also cleared when setting
the TI bit, causing any wired TLB entries to become unwired.
Use local_flush_tlb_all() which implements TLB flushing in a safer
manner by using the memory-mapped TLB registers. As each CPU has its own
PMB the modifications in pmb_init() only affect the local CPU, so only
flush the local CPU's TLB.
Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
flush_tlb_page() can be used to flush TLB entries that map executable
pages. Therefore, we need to ensure that the ITLB is also flushed in
local_flush_tlb_page().
Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
interruptible_sleep_on() is referenced for use in the mid_sched macro
which is not used anywhere. Remove reference and macro as well as the
comment which appears to belong with them.
Signed-off-by: Andreas Bombe <aeb@debian.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This warning has been introduced during the SCI DMA support developmenr and is
not needed any more.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
The follwing commit breaks SH-Mobile on non-ARM platforms:
"8a77b8d serial: sh-sci: Support ARM-based SH-Mobile CPUs."
The commit assumed that CONFIG_ARCH_SHMOBILE only was set
on ARM platforms, but it turns out that this kconfig is also
set by all SH-based SoCs. Sh7724 and other older SH-Mobile
SoCs are all broken without this fix.
This patch converts the "defined(CONFIG_ARCH_SHMOBILE)" into
one "defined()" per SoC model - similar to existing SH code.
Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
i2c_put_adapter is needed after i2c_get_adapter
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
I haven't been able to get link up on a NX_P3_B1 since 2.6.31. The
driver complains about a firmware hang instead. When I asked I was
told rev 0x41 was a preproduction rev. So disable support in the
driver so no one is surprised the code doesn't work.
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
v2: update according to Frans' comments.
Currently, if we leave spaces before dst port,
netconsole will silently accept it as 0. Warn about this.
Also, when spaces appear in other places, make them
visible in error messages.
Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: David Miller <davem@davemloft.net>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MMR bits are being moved to this header, so include it.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 45575f5a42 ("ppc64 sys_ipc breakage in 2.6.34-rc2") fixed the
definition of the sys_ipc() helper, but didn't fix the prototype in
<linux/syscalls.h>
Reported-and-tested-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix I2C-drivers which missed setting clientdata to NULL before freeing the
structure it points to. Also fix drivers which do this _after_ the structure
was freed already.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Given x=0,1,2, current implementation of BUCK_VOL_CHANGE_SHIFT(x) returns 0,4,8.
The correct return value should be 0,4,6.
This patch fix the logic.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
In lp3971_ldo_set_voltage function, it requires val to left shift 4
bits for LDO2 and LDO4.
This patch fix this issue.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
WARNING: at kernel/lockdep.c:2706 sysfs_add_file_mode+0x4c/0xa8()
Difference between v1 and v2:
Moved sysfs_attr_init() call as first one to access the structure.
Signed-off-by: Ameya Palande <ameya.palande@nokia.com>
CC: Liam Girdwood <lrg@slimlogic.co.uk>
CC: Mark Brown <broonie@opensource.wolfsonmicro.com>
CC: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Return -ENOMEM if kcalloc() fails
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
It is a good tone to reset driver data after unbinding the device.
Also change find_regulator_info() fro inline to __devinit - let compiler
figure out if it wants it to be inlined or not.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Commit 8ccb92ad (netfilter: xt_recent: fix false match) fixed supposedly
false matches in rules using a zero hit_count. As it turns out there is
nothing false about these matches and people are actually using entries
with a hit_count of zero to make rules dependant on addresses inserted
manually through /proc.
Since this slipped past the eyes of three reviewers, instead of
reverting the commit in question, this patch explicitly checks
for a hit_count of zero to make the intentions more clear.
Reported-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Tested-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Cc: stable@kernel.org
Signed-off-by: Patrick McHardy <kaber@trash.net>
alloc_skb() can return NULL.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio: console: Check if port is valid in resize_console
virtio: console: Generate a kobject CHANGE event on adding 'name' attribute
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (38 commits)
ip_gre: include route header_len in max_headroom calculation
if_tunnel.h: add missing ams/byteorder.h include
ipv4: Don't drop redirected route cache entry unless PTMU actually expired
net: suppress lockdep-RCU false positive in FIB trie.
Bluetooth: Fix kernel crash on L2CAP stress tests
Bluetooth: Convert debug files to actually use debugfs instead of sysfs
Bluetooth: Fix potential bad memory access with sysfs files
netfilter: ctnetlink: fix reliable event delivery if message building fails
netlink: fix NETLINK_RECV_NO_ENOBUFS in netlink_set_err()
NET_DMA: free skbs periodically
netlink: fix unaligned access in nla_get_be64()
tcp: Fix tcp_mark_head_lost() with packets == 0
net: ipmr/ip6mr: fix potential out-of-bounds vif_table access
KS8695: update ksp->next_rx_desc_read at the end of rx loop
igb: Add support for 82576 ET2 Quad Port Server Adapter
ixgbevf: Message formatting cleanups
ixgbevf: Shorten up delay timer for watchdog task
ixgbevf: Fix VF Stats accounting after reset
ixgbe: Set IXGBE_RSC_CB(skb)->DMA field to zero after unmapping the address
ixgbe: fix for real_num_tx_queues update issue
...
It seems clear from the surrounding code that xpermits is allowed to be
NULL here.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I chased down a fail on ppc64 on 2.6.34-rc2 where an application that
uses shared memory was getting a SEGV.
Commit baed7fc9b5 ("Add generic sys_ipc
wrapper") changed the second argument from an unsigned long to an int.
When we call shmget the system call wrappers for sys_ipc will sign
extend second (ie the size) which truncates it. It took a while to
track down because the call succeeds and strace shows the untruncated
size :)
The patch below changes second from an int to an unsigned long which
fixes shmget on ppc64 (and I assume s390, sparc64 and mips64).
Signed-off-by: Anton Blanchard <anton@samba.org>
--
I assume the function prototypes for the other IPC methods would cause us
to sign or zero extend second where appropriate (avoiding any security
issues). Come to think of it, the syscall wrappers for each method should do
that for us as well.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 3f6da39053
(perf: Rework and fix the arch CPU-hotplug hooks) broke suspend to
RAM on my HP nx6325 (and most likely on other AMD-based boxes too)
by allowing amd_pmu_cpu_offline() to be executed for CPUs that are
going offline as part of the suspend process. The problem is that
cpuhw->amd_nb may be NULL already, so the function should make sure
it's not NULL before accessing the object pointed to by it.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Print the CPU associated with the error only when the field is valid.
Cc: <stable@kernel.org> # .32.x .33.x
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
The size calculation is not correct. It should be end - start + 1.
Use resource_size() to caculate it.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
The console port could have been hot-unplugged. Check if it is valid
before working on it.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the host lets us know what 'name' a port is assigned, we create the
sysfs 'name' attribute. Generate a 'change' event after this so that
udev wakes up and acts on the rules for virtio-ports (currently there's
only one rule that creates a symlink from the 'name' to the actual char
device).
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>