As inode64 is the default option now, and was also made remountable
previously, inode32 can also be remounted on-the-fly when it is needed.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
To make inode32 a remountable option, xfs_set_inode32() should be able
to make a transition from inode64 option, disabling inode allocation on
higher AGs.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
With the changes made on xfs_set_inode64(), to make it behave as
xfs_set_inode32() (now leaving to the caller the responsibility to update
mp->m_maxagi), we use the return value of xfs_set_inode64() to update
mp->m_maxagi during remount.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Add xfs_set_inode32() to be used to enable inode32 allocation mode. this
will reduce the amount of duplicated code needed to mount/remount a
filesystem with inode32 option. This patch also changes
xfs_set_inode64() to return the maximum AG number that inodes can be
allocated instead of set mp->m_maxagi by itself, so that the behaviour
is the same as xfs_set_inode32(). This simplifies code that calls these
functions and needs to know the maximum AG that inodes can be allocated
in.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
since 64-bit inodes can be accessed while using inode32, and these can
also be used on 32-bit kernels, there is no reason to still keep inode32
as the default mount option. If the filesystem cannot handle 64bit
inode numbers (i.e CONFIG_LBDAF is not enabled and BITS_PER_LONG == 32),
XFS_MOUNT_SMALL_INUMS will still be set by default, so inode64 is not an
unconditional default value.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Actually, there is no reason about why a user must umount and mount a
XFS filesystem to enable 'inode64' option. So, this patch makes this a
remountable option.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Cancel work of the xfs_sync_worker before teardown of the log in
xfs_unmountfs. This prevents occasional crashes on unmount like so:
PID: 21602 TASK: ee9df060 CPU: 0 COMMAND: "kworker/0:3"
#0 [c5377d28] crash_kexec at c0292c94
#1 [c5377d80] oops_end at c07090c2
#2 [c5377d98] no_context at c06f614e
#3 [c5377dbc] __bad_area_nosemaphore at c06f6281
#4 [c5377df4] bad_area_nosemaphore at c06f629b
#5 [c5377e00] do_page_fault at c070b0cb
#6 [c5377e7c] error_code (via page_fault) at c070892c
EAX: f300c6a8 EBX: f300c6a8 ECX: 000000c0 EDX: 000000c0 EBP: c5377ed0
DS: 007b ESI: 00000000 ES: 007b EDI: 00000001 GS: ffffad20
CS: 0060 EIP: c0481ad0 ERR: ffffffff EFLAGS: 00010246
#7 [c5377eb0] atomic64_read_cx8 at c0481ad0
#8 [c5377ebc] xlog_assign_tail_lsn_locked at f7cc7c6e [xfs]
#9 [c5377ed4] xfs_trans_ail_delete_bulk at f7ccd520 [xfs]
#10 [c5377f0c] xfs_buf_iodone at f7ccb602 [xfs]
#11 [c5377f24] xfs_buf_do_callbacks at f7cca524 [xfs]
#12 [c5377f30] xfs_buf_iodone_callbacks at f7cca5da [xfs]
#13 [c5377f4c] xfs_buf_iodone_work at f7c718d0 [xfs]
#14 [c5377f58] process_one_work at c024ee4c
#15 [c5377f98] worker_thread at c024f43d
#16 [c5377fbc] kthread at c025326b
#17 [c5377fe8] kernel_thread_helper at c070e834
PID: 26653 TASK: e79143b0 CPU: 3 COMMAND: "umount"
#0 [cde0fda0] __schedule at c0706595
#1 [cde0fe28] schedule at c0706b89
#2 [cde0fe30] schedule_timeout at c0705600
#3 [cde0fe94] __down_common at c0706098
#4 [cde0fec8] __down at c0706122
#5 [cde0fed0] down at c025936f
#6 [cde0fee0] xfs_buf_lock at f7c7131d [xfs]
#7 [cde0ff00] xfs_freesb at f7cc2236 [xfs]
#8 [cde0ff10] xfs_fs_put_super at f7c80f21 [xfs]
#9 [cde0ff1c] generic_shutdown_super at c0333d7a
#10 [cde0ff38] kill_block_super at c0333e0f
#11 [cde0ff48] deactivate_locked_super at c0334218
#12 [cde0ff58] deactivate_super at c033495d
#13 [cde0ff68] mntput_no_expire at c034bc13
#14 [cde0ff7c] sys_umount at c034cc69
#15 [cde0ffa0] sys_oldumount at c034ccd4
#16 [cde0ffb0] system_call at c0707e66
commit 11159a05 added this to xfs_log_unmount and needs to be cleaned up
at a later date.
Signed-off-by: Ben Myers <bpm@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Cancel work of the xfs_sync_worker before teardown of the log in
xfs_unmountfs. This prevents occasional crashes on unmount like so:
PID: 21602 TASK: ee9df060 CPU: 0 COMMAND: "kworker/0:3"
#0 [c5377d28] crash_kexec at c0292c94
#1 [c5377d80] oops_end at c07090c2
#2 [c5377d98] no_context at c06f614e
#3 [c5377dbc] __bad_area_nosemaphore at c06f6281
#4 [c5377df4] bad_area_nosemaphore at c06f629b
#5 [c5377e00] do_page_fault at c070b0cb
#6 [c5377e7c] error_code (via page_fault) at c070892c
EAX: f300c6a8 EBX: f300c6a8 ECX: 000000c0 EDX: 000000c0 EBP: c5377ed0
DS: 007b ESI: 00000000 ES: 007b EDI: 00000001 GS: ffffad20
CS: 0060 EIP: c0481ad0 ERR: ffffffff EFLAGS: 00010246
#7 [c5377eb0] atomic64_read_cx8 at c0481ad0
#8 [c5377ebc] xlog_assign_tail_lsn_locked at f7cc7c6e [xfs]
#9 [c5377ed4] xfs_trans_ail_delete_bulk at f7ccd520 [xfs]
#10 [c5377f0c] xfs_buf_iodone at f7ccb602 [xfs]
#11 [c5377f24] xfs_buf_do_callbacks at f7cca524 [xfs]
#12 [c5377f30] xfs_buf_iodone_callbacks at f7cca5da [xfs]
#13 [c5377f4c] xfs_buf_iodone_work at f7c718d0 [xfs]
#14 [c5377f58] process_one_work at c024ee4c
#15 [c5377f98] worker_thread at c024f43d
#16 [c5377fbc] kthread at c025326b
#17 [c5377fe8] kernel_thread_helper at c070e834
PID: 26653 TASK: e79143b0 CPU: 3 COMMAND: "umount"
#0 [cde0fda0] __schedule at c0706595
#1 [cde0fe28] schedule at c0706b89
#2 [cde0fe30] schedule_timeout at c0705600
#3 [cde0fe94] __down_common at c0706098
#4 [cde0fec8] __down at c0706122
#5 [cde0fed0] down at c025936f
#6 [cde0fee0] xfs_buf_lock at f7c7131d [xfs]
#7 [cde0ff00] xfs_freesb at f7cc2236 [xfs]
#8 [cde0ff10] xfs_fs_put_super at f7c80f21 [xfs]
#9 [cde0ff1c] generic_shutdown_super at c0333d7a
#10 [cde0ff38] kill_block_super at c0333e0f
#11 [cde0ff48] deactivate_locked_super at c0334218
#12 [cde0ff58] deactivate_super at c033495d
#13 [cde0ff68] mntput_no_expire at c034bc13
#14 [cde0ff7c] sys_umount at c034cc69
#15 [cde0ffa0] sys_oldumount at c034ccd4
#16 [cde0ffb0] system_call at c0707e66
commit 11159a05 added this to xfs_log_unmount and needs to be cleaned up
at a later date.
Signed-off-by: Ben Myers <bpm@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
flush[_delayed]_work_sync() are now spurious. Mark them deprecated
and convert all users to flush[_delayed]_work().
If you're cc'd and wondering what's going on: Now all workqueues are
non-reentrant and the regular flushes guarantee that the work item is
not pending or running on any CPU on return, so there's no reason to
use the sync flushes at all and they're going away.
This patch doesn't make any functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mattia Dongili <malattia@linux.it>
Cc: Kent Yoder <key@linux.vnet.ibm.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Bryan Wu <bryan.wu@canonical.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-wireless@vger.kernel.org
Cc: Anton Vorontsov <cbou@mail.ru>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Petr Vandrovec <petr@vandrovec.name>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Avi Kivity <avi@redhat.com>
Content-Disposition: inline; filename=xfs-remove-iolock-classes
Now that we never take the iolock during inode reclaim we don't need
to play games with lock classes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Use this new method to replace our hacky use of ->dirty_inode. An additional
benefit is that we can now propagate errors up the stack.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The struct xfs_dabuf now only tracks a single xfs_buf and all the
information it holds can be gained directly from the xfs_buf. Hence
we can remove the struct dabuf and pass the xfs_buf around
everywhere.
Kill the struct dabuf and the associated infrastructure.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
The struct xfs_buf_log_format wants to think the dirty bitmap is
variable sized. In fact, it is variable size on disk simply due to
the way we map it from the in-memory structure, but we still just
use a fixed size memory allocation for the in-memory structure.
Hence it makes no sense to set the function up as a variable sized
structure when we already know it's maximum size, and we always
allocate it as such. Simplify the structure by making the dirty
bitmap a fixed sized array and just using the size of the structure
for the allocation size.
This will make it much simpler to allocate and manipulate an array
of format structures for discontiguous buffer support.
The previous struct xfs_buf_log_item size according to
/proc/slabinfo was 224 bytes. pahole doesn't give the same size
because of the variable size definition. With this modification,
pahole reports the same as /proc/slabinfo:
/* size: 224, cachelines: 4, members: 6 */
Because the xfs_buf_log_item size is now determined by the maximum
supported block size we introduce a dependency on xfs_alloc_btree.h.
Avoid this dependency by moving the idefines for the maximum block
sizes supported to xfs_types.h with all the other max/min type
defines to avoid any new dependencies.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=oLXf
-----END PGP SIGNATURE-----
Merge tag 'writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux
Pull writeback tree from Wu Fengguang:
"Mainly from Jan Kara to avoid iput() in the flusher threads."
* tag 'writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
writeback: Avoid iput() from flusher thread
vfs: Rename end_writeback() to clear_inode()
vfs: Move waiting for inode writeback from end_writeback() to evict_inode()
writeback: Refactor writeback_single_inode()
writeback: Remove wb->list_lock from writeback_single_inode()
writeback: Separate inode requeueing after writeback
writeback: Move I_DIRTY_PAGES handling
writeback: Move requeueing when I_SYNC set to writeback_sb_inodes()
writeback: Move clearing of I_SYNC into inode_sync_complete()
writeback: initialize global_dirty_limit
fs: remove 8 bytes of padding from struct writeback_control on 64 bit builds
mm: page-writeback.c: local functions should not be exposed globally
With the removal of xfs_rw.h and other changes over time, xfs_bit.h
is being included in many files that don't actually need it. Clean
up the includes as necessary.
Also move the only-used-once xfs_ialloc_find_free() static inline
function out of a header file that is widely included to reduce
the number of needless dependencies on xfs_bit.h.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Doing background CIL flushes adds significant latency to whatever
async transaction that triggers it. To avoid blocking async
transactions on things like waiting for log buffer IO to complete,
move the CIL push off into a workqueue. By moving the push work
into a workqueue, we remove all the latency that the commit adds
from the foreground transaction commit path. This also means that
single threaded workloads won't do the CIL push procssing, leaving
them more CPU to do more async transactions.
To do this, we need to keep track of the sequence number we have
pushed work for. This avoids having many transaction commits
attempting to schedule work for the same sequence, and ensures that
we only ever have one push (background or forced) in progress at a
time. It also means that we don't need to take the CIL lock in write
mode to check for potential background push races, which reduces
lock contention.
To avoid potential issues with "smart" IO schedulers, don't use the
workqueue for log force triggered flushes. Instead, do them directly
so that the log IO is done directly by the process issuing the log
force and so doesn't get stuck on IO elevator queue idling
incorrectly delaying the log IO from the workqueue.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Queue delwri buffers on a local on-stack list instead of a per-buftarg one,
and write back the buffers per-process instead of by waking up xfsbufd.
This is now easily doable given that we have very few places left that write
delwri buffers:
- log recovery:
Only done at mount time, and already forcing out the buffers
synchronously using xfs_flush_buftarg
- quotacheck:
Same story.
- dquot reclaim:
Writes out dirty dquots on the LRU under memory pressure. We might
want to look into doing more of this via xfsaild, but it's already
more optimal than the synchronous inode reclaim that writes each
buffer synchronously.
- xfsaild:
This is the main beneficiary of the change. By keeping a local list
of buffers to write we reduce latency of writing out buffers, and
more importably we can remove all the delwri list promotions which
were hitting the buffer cache hard under sustained metadata loads.
The implementation is very straight forward - xfs_buf_delwri_queue now gets
a new list_head pointer that it adds the delwri buffers to, and all callers
need to eventually submit the list using xfs_buf_delwi_submit or
xfs_buf_delwi_submit_nowait. Buffers that already are on a delwri list are
skipped in xfs_buf_delwri_queue, assuming they already are on another delwri
list. The biggest change to pass down the buffer list was done to the AIL
pushing. Now that we operate on buffers the trylock, push and pushbuf log
item methods are merged into a single push routine, which tries to lock the
item, and if possible add the buffer that needs writeback to the buffer list.
This leads to much simpler code than the previous split but requires the
individual IOP_PUSH instances to unlock and reacquire the AIL around calls
to blocking routines.
Given that xfsailds now also handle writing out buffers, the conditions for
log forcing and the sleep times needed some small changes. The most
important one is that we consider an AIL busy as long we still have buffers
to push, and the other one is that we do increment the pushed LSN for
buffers that are under flushing at this moment, but still count them towards
the stuck items for restart purposes. Without this we could hammer on stuck
items without ever forcing the log and not make progress under heavy random
delete workloads on fast flash storage devices.
[ Dave Chinner:
- rebase on previous patches.
- improved comments for XBF_DELWRI_Q handling
- fix XBF_ASYNC handling in queue submission (test 106 failure)
- rename delwri submit function buffer list parameters for clarity
- xfs_efd_item_push() should return XFS_ITEM_PINNED ]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Issuing a block device flush request in transaction context using GFP_KERNEL
directly can cause deadlocks due to memory reclaim recursion. Use GFP_NOFS to
avoid recursion from reclaim context.
Signed-off-by: Shaohua Li <shli@fusionio.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
After we moved inode_sync_wait() from end_writeback() it doesn't make sense
to call the function end_writeback() anymore. Rename it to clear_inode()
which well says what the function really does - set I_CLEAR flag.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Because the mount process can run a quotacheck and consume lots of
inodes, we need to be able to run periodic inode reclaim during the
mount process. This will prevent running the system out of memory
during quota checks.
This essentially reverts 2bcf6e97, but that is safe to do now that
the quota sync code that was causing problems during long quotacheck
executions is now gone.
The reclaim work is currently protected from running during the
unmount process by a check against MS_ACTIVE. Unfortunately, this
also means that the reclaim work cannot run during mount. The
unmount process should stop the reclaim cleanly before freeing
anything that the reclaim work depends on, so there is no need to
have this guard in place.
Also, the inode reclaim work is demand driven, so there is no need
to start it immediately during mount. It will be started the moment
an inode is queued for reclaim, so qutoacheck will trigger it just
fine.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Check if the project quota is running or not before performing
xfs_qm_statvfs(), just return if not. Otherwise the ASSERT
XFS_IS_QUOTA_RUNNING in xfs_qm_dqget will be popped.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Pull XFS update (part 2) from Ben Myers:
"Fixes for tracing of xfs_name strings, flag handling in
open_by_handle, a log space hang with freeze/unfreeze, fstrim offset
calculations, a section mismatch with xfs_qm_exit, an oops in
xlog_recover_process_iunlinks, and a deadlock in xfs_rtfree_extent.
There are also additional trace points for attributes, and the
addition of a workqueue for allocation to work around kernel stack
size limitations."
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
xfs: add lots of attribute trace points
xfs: Fix oops on IO error during xlog_recover_process_iunlinks()
xfs: fix fstrim offset calculations
xfs: Account log unmount transaction correctly
xfs: don't cache inodes read through bulkstat
xfs: trace xfs_name strings correctly
xfs: introduce an allocation workqueue
xfs: Fix open flag handling in open_by_handle code
xfs: fix deadlock in xfs_rtfree_extent
fs: xfs: fix section mismatch in linux-next
When we read inodes via bulkstat, we generally only read them once
and then throw them away - they never get used again. If we retain
them in cache, then it simply causes the working set of inodes and
other cached items to be reclaimed just so the inode cache can grow.
Avoid this problem by marking inodes read by bulkstat not to be
cached and check this flag in .drop_inode to determine whether the
inode should be added to the VFS LRU or not. If the inode lookup
hits an already cached inode, then don't set the flag. If the inode
lookup hits an inode marked with no cache flag, remove the flag and
allow it to be cached once the current reference goes away.
Inodes marked as not cached will get cleaned up by the background
inode reclaim or via memory pressure, so they will still generate
some short term cache pressure. They will, however, be reclaimed
much sooner and in preference to cache hot inodes.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Pull XFS updates from Ben Myers:
"Scalability improvements for dquots, log grant code cleanups, plus
bugfixes and cleanups large and small"
Fix up various trivial conflicts that were due to some of the earlier
patches already having been integrated into v3.3 as bugfixes, and then
there were development patches on top of those. Easily merged by just
taking the newer version from the pulled branch.
* 'for-linus' of git://oss.sgi.com/xfs/xfs: (45 commits)
xfs: fallback to vmalloc for large buffers in xfs_getbmap
xfs: fallback to vmalloc for large buffers in xfs_attrmulti_attr_get
xfs: remove remaining scraps of struct xfs_iomap
xfs: fix inode lookup race
xfs: clean up minor sparse warnings
xfs: remove the global xfs_Gqm structure
xfs: remove the per-filesystem list of dquots
xfs: use per-filesystem radix trees for dquot lookup
xfs: per-filesystem dquot LRU lists
xfs: use common code for quota statistics
xfs: reimplement fdatasync support
xfs: split in-core and on-disk inode log item fields
xfs: make xfs_inode_item_size idempotent
xfs: log timestamp updates
xfs: log file size updates at I/O completion time
xfs: log file size updates as part of unwritten extent conversion
xfs: do not require an ioend for new EOF calculation
xfs: use per-filesystem I/O completion workqueues
quota: make Q_XQUOTASYNC a noop
xfs: include reservations in quota reporting
...
We currently have significant issues with the amount of stack that
allocation in XFS uses, especially in the writeback path. We can
easily consume 4k of stack between mapping the page, manipulating
the bmap btree and allocating blocks from the free list. Not to
mention btree block readahead and other functionality that issues IO
in the allocation path.
As a result, we can no longer fit allocation in the writeback path
in the stack space provided on x86_64. To alleviate this problem,
introduce an allocation workqueue and move all allocations to a
seperate context. This can be easily added as an interposing layer
into xfs_alloc_vextent(), which takes a single argument structure
and does not return until the allocation is complete or has failed.
To do this, add a work structure and a completion to the allocation
args structure. This allows xfs_alloc_vextent to queue the args onto
the workqueue and wait for it to be completed by the worker. This
can be done completely transparently to the caller.
The worker function needs to ensure that it sets and clears the
PF_TRANS flag appropriately as it is being run in an active
transaction context. Work can also be queued in a memory reclaim
context, so a rescuer is needed for the workqueue.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
New field of struct super_block - ->s_max_links. Maximal allowed
value of ->i_nlink or 0; in the latter case all checks still need
to be done in ->link/->mkdir/->rename instances. Note that this
limit applies both to directoris and to non-directories.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If we initialize the slab caches for the quota code when XFS is loaded there
is no need for a global and reference counted quota manager structure. Drop
all this overhead and also fix the error handling during quota initialization.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Add an in-memory only flag to say we logged timestamps only, and use it to
check if fdatasync can optimize away the log force.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Timestamps on regular files are the last metadata that XFS does not update
transactionally. Now that we use the delaylog mode exclusively and made
the log scode scale extremly well there is no need to bypass that code for
timestamp updates. Logging all updates allows to drop a lot of code, and
will allow for further performance improvements later on.
Note that this patch drops optimized handling of fdatasync - it will be
added back in a separate commit.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The new concurrency managed workqueues are cheap enough that we can create
per-filesystem instead of global workqueues. This allows us to remove the
trylock or defer scheme on the ilock, which is not helpful once we have
outstanding log reservations until finishing a size update.
Also allow the default concurrency on this workqueues so that I/O completions
blocking on the ilock for one inode do not block process for another inode.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Define new macro XFS_ALL_QUOTA_ACTIVE and simply some usage
of quota macros.
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Replace i_pin_wait, which is only used during synchronous inode flushing
with a bit waitqueue. This trades off a much smaller inode against
slightly slower wakeup performance, and saves 12 (32-bit) or 20 (64-bit)
bytes in the XFS inode.
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
We almost never block on i_flock, the exception is synchronous inode
flushing. Instead of bloating the inode with a 16/24-byte completion
that we abuse as a semaphore just implement it as a bitlock that uses
a bit waitqueue for the rare sleeping path. This primarily is a
tradeoff between a much smaller inode and a faster non-blocking
path vs faster wakeups, and we are much better off with the former.
A small downside is that we will lose lockdep checking for i_flock, but
given that it's always taken inside the ilock that should be acceptable.
Note that for example the inode writeback locking is implemented in a
very similar way.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
* 'for-linus' of git://oss.sgi.com/xfs/xfs: (22 commits)
xfs: mark the xfssyncd workqueue as non-reentrant
xfs: simplify xfs_qm_detach_gdquots
xfs: fix acl count validation in xfs_acl_from_disk()
xfs: remove unused XBT_FORCE_SLEEP bit
xfs: remove XFS_QMOPT_DQSUSER
xfs: kill xfs_qm_idtodq
xfs: merge xfs_qm_dqinit_core into the only caller
xfs: add a xfs_dqhold helper
xfs: simplify xfs_qm_dqattach_grouphint
xfs: nest qm_dqfrlist_lock inside the dquot qlock
xfs: flatten the dquot lock ordering
xfs: implement lazy removal for the dquot freelist
xfs: remove XFS_DQ_INACTIVE
xfs: cleanup xfs_qm_dqlookup
xfs: cleanup dquot locking helpers
xfs: remove the sync_mode argument to xfs_qm_dqflush_all
xfs: remove xfs_qm_sync
xfs: make sure to really flush all dquots in xfs_qm_quotacheck
xfs: untangle SYNC_WAIT and SYNC_TRYLOCK meanings for xfs_qm_dqflush
xfs: remove the lid_size field in struct log_item_desc
...
Fix up trivial conflict in fs/xfs/xfs_sync.c
Since Linux 2.6.36 the writeback code has introduces various measures for
live lock prevention during sync(). Unfortunately some of these are
actively harmful for the XFS model, where the inode gets marked dirty for
metadata from the data I/O handler.
The older_than_this checks that are now more strictly enforced since
writeback: avoid livelocking WB_SYNC_ALL writeback
by only calling into __writeback_inodes_sb and thus only sampling the
current cut off time once. But on a slow enough devices the previous
asynchronous sync pass might not have fully completed yet, and thus XFS
might mark metadata dirty only after that sampling of the cut off time for
the blocking pass already happened. I have not myself reproduced this
myself on a real system, but by introducing artificial delay into the
XFS I/O completion workqueues it can be reproduced easily.
Fix this by iterating over all XFS inodes in ->sync_fs and log all that
are dirty. This might log inode that only got redirtied after the
previous pass, but given how cheap delayed logging of inodes is it
isn't a major concern for performance.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Tested-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
If the writeback code writes back an inode because it has expired we currently
use the non-blockin ->write_inode path. This means any inode that is pinned
is skipped. With delayed logging and a workload that has very little log
traffic otherwise it is very likely that an inode that gets constantly
written to is always pinned, and thus we keep refusing to write it. The VM
writeback code at that point redirties it and doesn't try to write it again
for another 30 seconds. This means under certain scenarious time based
metadata writeback never happens.
Fix this by calling into xfs_log_inode for kupdate in addition to data
integrity syncs, and thus transfer the inode to the log ASAP.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Tested-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
On a system with lots of memory pressure that is stuck on synchronous inode
reclaim the workqueue code will run one instance of the inode reclaim work
item on every CPU. which is not what we want. Make sure to mark the
xfssyncd workqueue as non-reentrant to make sure there only is one instace
of each running globally. Also stop using special paramater for the
workqueue; now that we guarantee each fs has only running one of each works
at a time there is no need to artificially lower max_active and compensate
for that by setting the WQ_CPU_INTENSIVE flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Now that we can't have any dirty dquots around that aren't in the AIL we
can get rid of the explicit dquot syncing from xfssyncd and xfs_fs_sync_fs
and instead rely on AIL pushing to write out any quota updates.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The delaylog mode has been the default for a long time, and the nodelaylog
option has been scheduled for removal in Linux 3.3. Remove it and code
only used by it now that we have opened the 3.3 window.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Resolved conflicts:
fs/xfs/xfs_trans_priv.h:
- deleted struct xfs_ail field xa_flags
- kept field xa_log_flush in struct xfs_ail
fs/xfs/xfs_trans_ail.c:
- in xfsaild_push(), in XFS_ITEM_PUSHBUF case, replaced
"flush_log = 1" with "ailp->xa_log_flush++"
Signed-off-by: Alex Elder <aelder@sgi.com>
There is no reason to keep a reference to the inode even if we unlock
it during transaction commit because we never drop a reference between
the ijoin and commit. Also use this fact to merge xfs_trans_ijoin_ref
back into xfs_trans_ijoin - the third argument decides if an unlock
is needed now.
I'm actually starting to wonder if allowing inodes to be unlocked
at transaction commit really is worth the effort. The only real
benefit is that they can be unlocked earlier when commiting a
synchronous transactions, but that could be solved by doing the
log force manually after the unlock, too.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
We now have an i_dio_count filed and surrounding infrastructure to wait
for direct I/O completion instead of i_icount, and we have never needed
to iocount waits for buffered I/O given that we only set the page uptodate
after finishing all required work. Thus remove i_iocount, and replace
the actually needed waits with calls to inode_dio_wait.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Currently we have a few issues with the way the workqueue code is used to
implement AIL pushing:
- it accidentally uses the same workqueue as the syncer action, and thus
can be prevented from running if there are enough sync actions active
in the system.
- it doesn't use the HIGHPRI flag to queue at the head of the queue of
work items
At this point I'm not confident enough in getting all the workqueue flags and
tweaks right to provide a perfectly reliable execution context for AIL
pushing, which is the most important piece in XFS to make forward progress
when the log fills.
Revert back to use a kthread per filesystem which fixes all the above issues
at the cost of having a task struct and stack around for each mounted
filesystem. In addition this also gives us much better ways to diagnose
any issues involving hung AIL pushing and removes a small amount of code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Stefan Priebe <s.priebe@profihost.ag>
Tested-by: Stefan Priebe <s.priebe@profihost.ag>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Currently we always redirty an inode that was attempted to be written out
synchronously but has been cleaned by an AIL pushed internall, which is
rather bogus. Fix that by doing the i_update_core check early on and
return 0 for it. Also include async calls for it, as doing any work for
those is just as pointless. While we're at it also fix the sign for the
EIO return in case of a filesystem shutdown, and fix the completely
non-sensical locking around xfs_log_inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
(cherry picked from commit 297db93bb74cf687510313eb235a7aec14d67e97)
Signed-off-by: Alex Elder <aelder@sgi.com>
Use the move from Linux 2.6 to Linux 3.x as an excuse to kill the
annoying subdirectories in the XFS source code. Besides the large
amount of file rename the only changes are to the Makefile, a few
files including headers with the subdirectory prefix, and the binary
sysctl compat code that includes a header under fs/xfs/ from
kernel/.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Carlos Maiolino