The same function is used by idmap, gss and blocklayout code. Make it
generic.
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Cc: stable@kernel.org [3.0]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Make the status field explicitly 32 bits. "...it's unlikely that the kernel
and userspace would differ on the size of an int here, but it might be a
good idea to go ahead and make that explicitly 32 bits in case we end up
dealing with more exotic arches at some point in the future."
Suggested-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Cc: stable@kernel.org [3.0]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Always return PTR_ERR, not NULL, from nfs4_blk_get_deviceinfo and
nfs4_blk_decode_device.
Check for IS_ERR, not NULL, in bl_set_layoutdriver when calling
nfs4_blk_get_deviceinfo.
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Cc: stable@kernel.org [3.0]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
nfs_find_and_lock_request will take a reference to the nfs_page and
will then put it if the req is already locked. It's possible though
that the reference will be the last one. That put then can kick off
a whole series of reference puts:
nfs_page
nfs_open_context
dentry
inode
If the inode ends up being deleted, then the VFS will call
truncate_inode_pages. That function will try to take the page lock, but
it was already locked when migrate_page was called. The code
deadlocks.
Fix this by simply refusing the migration request if PagePrivate is
already set, indicating that the page is already associated with an
active read or write request.
We've had a customer test a backported version of this patch and
the preliminary results seem good.
Cc: stable@kernel.org
Cc: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Harshula Jayasuriya <harshula@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The result from ipv6_addr_scope() always not be a single SCOPE,
so we can't use equal to compare the result with IPV6_ADDR_SCOPE_LINKLOCAL
at nfs_sockaddr_match_ipaddr6.
This patch fixs the problem, and lets checking address before scope_id.
Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
commit 420e3646 allowed the kernel to reduce the number of unnecessary
commit calls by skipping the commit when there are a large number of
outstanding pages.
However, the current test in nfs_commit_unstable_pages does not handle
the edge condition properly. When ncommit == 0, then that means that the
kernel doesn't need to do anything more for the inode. The current test
though in the WB_SYNC_NONE case will return true, and the inode will end
up being marked dirty. Once that happens the inode will never be clean
until there's a WB_SYNC_ALL flush.
Fix this by immediately returning from nfs_commit_unstable_pages when
ncommit == 0.
Mike noticed this problem initially in RHEL5 (2.6.18-based kernel) which
has a backported version of 420e3646. The inode cache there was growing
very large. The inode cache was unable to be shrunk since the inodes
were all marked dirty. Calling sync() would essentially "fix" the
problem -- the WB_SYNC_ALL flush would result in the inodes all being
marked clean.
What I'm not clear on is how big a problem this is in mainline kernels
as the writeback code there is very different. Either way, it seems
incorrect to re-mark the inode dirty in this case.
Reported-by: Mike McLean <mikem@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Cc: stable@kernel.org [2.6.34+]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This reverts commit b80c3cb628.
The reverted commit was rendered obsolete by a VFS fix: commit
5547e8aac6 (writeback: Update dirty flags in
two steps). We now no longer need to worry about writeback_single_inode()
missing our marking the inode for COMMIT in 'do_writepages()' call.
Reverting this patch, fixes a performance regression in which the inode
would continuously get queued to the dirty list, causing the writeback
code to unnecessarily try to send a COMMIT.
Signed-off-by: Trond Myklebust <Trond.Myklebust>
Tested-by: Simon Kirby <sim@hostway.ca>
Cc: stable@kernel.org [2.6.35+]
The concensus seems to be that system calls such as stat() etc should
not trigger an automount. Neither should the l* versions.
This patch therefore adds a LOOKUP_AUTOMOUNT flag to tag those lookups
that _should_ trigger an automount on the last path element.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
[ Edited to leave out the cases that are already covered by LOOKUP_OPEN,
LOOKUP_DIRECTORY and LOOKUP_CREATE - all of which also fundamentally
force automounting for their own reasons - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Do not allow multiple mounts on same mountpoint when using -o noac
When you normally attempt to mount a share twice on the same mountpoint,
a check in do_add_mount causes it to return an error
# mount localhost:/nfsv3 /mnt
# mount localhost:/nfsv3 /mnt
mount.nfs: /mnt is already mounted or busy
However when using the option 'noac', the user is able to mount the same
share on the same mountpoint multiple times. This happens because a
share mounted with the noac option is automatically assigned the 'sync'
flag MS_SYNCHRONOUS in nfs_initialise_sb(). This flag is set after the
check for already existing superblocks is done in sget(). The check for
the mount flags in nfs_compare_mount_options() does not take into
account the 'sync' flag applied later on in the code path. This means
that when using 'noac', a new superblock structure is assigned for every
new mount of the same share and multiple shares on the same mountpoint
are allowed.
ie.
# mount -onoac localhost:/nfsv3 /mnt
can be run multiple times.
The patch checks for noac and assigns the sync flag before sget() is
called to obtain an already existing superblock structure.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Fix a typo which causes an Oops in the RPC layer, when using wsize < 4k.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Tested-by: Sricharan R <r.sricharan@ti.com>
The NFSv4 spec does not specify that the server must repeat that error,
so in order to avoid having the delegations revoked, we should handle
it immediately.
Also note that NFS4ERR_CB_PATH_DOWN does in fact renew the lease...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
RFC3530 states that if the client holds a delegation, then it is obliged
to continue to send RENEW calls once every lease period in order to allow
the server to return NFS4ERR_CB_PATH_DOWN if the callback path is
unreachable.
This is not required for NFSv4.1, since the server can at any time set
the SEQ4_STATUS_CB_PATH_DOWN_SESSION in any SEQUENCE operation.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4.1: Return NFS4ERR_BADSESSION to callbacks during session resets
NFSv4.1: Fix the callback 'highest_used_slotid' behaviour
pnfs-obj: Fix the comp_index != 0 case
pnfs-obj: Bug when we are running out of bio
nfs: add missing prefetch.h include
Just like files-layout, blocks & objects layouts are part of the
NFS 4.1 protocol and should be automatically selected if NFS_4_1
is selected. The small problem is that these depend on other
Kernel support being present, while files only depends on NFS
itself.
This patch removes from the user choice the presence of objects
and blocks layout. But makes sure these are selected only if
the depended subsystems are present in the Kernel.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Acked-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
PNFS_BLOCK needs BLK_DEV_DM/MD, which is not a dependency for other
pnfs layout drivers. Seperate it out so others can still build when
BLK_DEV_DM/MD is not enabled.
Also change select to depends on to avoid build failures.
Reported-and-tested-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Peng Tao <peng_tao@emc.com>
Acked-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the client is in the process of resetting the session when it receives
a callback, then returning NFS4ERR_DELAY may cause a deadlock with the
DESTROY_SESSION call.
Basically, if the client returns NFS4ERR_DELAY in response to the
CB_SEQUENCE call, then the server is entitled to believe that the
client is busy because it is already processing that call. In that
case, the server is perfectly entitled to respond with a
NFS4ERR_BACK_CHAN_BUSY to any DESTROY_SESSION call.
Fix this by having the client reply with a NFS4ERR_BADSESSION in
response to the callback if it is resetting the session.
Cc: stable@kernel.org [2.6.38+]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently, there is no guarantee that we will call nfs4_cb_take_slot() even
though nfs4_callback_compound() will consistently call
nfs4_cb_free_slot() provided the cb_process_state has set the 'clp' field.
The result is that we can trigger the BUG_ON() upon the next call to
nfs4_cb_take_slot().
This patch fixes the above problem by using the slot id that was taken in
the CB_SEQUENCE operation as a flag for whether or not we need to call
nfs4_cb_free_slot().
It also fixes an atomicity problem: we need to set tbl->highest_used_slotid
atomically with the check for NFS4_SESSION_DRAINING, otherwise we end up
racing with the various tests in nfs4_begin_drain_session().
Cc: stable@kernel.org [2.6.38+]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
There were bugs in the case of partial layout where olo_comp_index
is not zero. This used to work and was tested but one of the later
cleanup SQUASHMEs broke it and was not tested since.
Also add a dprint that specify those received layout parameters.
Everything else was already printed.
[Needed in v3.0]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When we have a situation that the number of pages we want
to encode is bigger then the size of the bio. (Which can
currently happen only when all IO is going to a single device
.e.g group_width==1) then the IO is submitted short and we
report back only the amount of bytes we actually wrote/read
and all is fine. BUT ...
There was a bug that the current length counter was advanced
before the fail to add the extra page, and we come to a situation
that the CDB length was one-page longer then the actual bio size,
which is of course rejected by the osd-target.
While here also fix the bio size calculation, in the case
that we received more then one group of devices.
CC: Stable Tree <stable@kernel.org>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Fix this compile error on s390:
CC [M] fs/nfs/blocklayout/blocklayout.o
fs/nfs/blocklayout/blocklayout.c: In function 'bl_end_io_read':
fs/nfs/blocklayout/blocklayout.c:201:4: error: implicit declaration of function 'prefetchw'
Introduced with 9549ec01 "pnfsblock: bl_read_pagelist".
Cc: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
xfs: Fix build breakage in xfs_iops.c when CONFIG_FS_POSIX_ACL is not set
VFS: Reorganise shrink_dcache_for_umount_subtree() after demise of dcache_lock
VFS: Remove dentry->d_lock locking from shrink_dcache_for_umount_subtree()
VFS: Remove detached-dentry counter from shrink_dcache_for_umount_subtree()
switch posix_acl_chmod() to umode_t
switch posix_acl_from_mode() to umode_t
switch posix_acl_equiv_mode() to umode_t *
switch posix_acl_create() to umode_t *
block: initialise bd_super in bdget()
vfs: avoid call to inode_lru_list_del() if possible
vfs: avoid taking inode_hash_lock on pipes and sockets
vfs: conditionally call inode_wb_list_del()
VFS: Fix automount for negative autofs dentries
Btrfs: load the key from the dir item in readdir into a fake dentry
devtmpfs: missing initialialization in never-hit case
hppfs: missing include
For invalid extents, find other pages in the same fsblock and write them out.
[pnfsblock: write_begin]
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Note: When upper layer's read/write request cannot be fulfilled, the block
layout driver shouldn't silently mark the page as error. It should do
what can be done and leave the rest to the upper layer. To do so, we
should set rdata/wdata->res.count properly.
When upper layer re-send the read/write request to finish the rest
part of the request, pgbase is the position where we should start at.
[pnfsblock: bl_write_pagelist support functions]
[pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS]
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
[pnfsblock: handle errors when read or write pagelist.]
Signed-off-by: Zhang Jingwang <yyalone@gmail.com>
[pnfs-block: use new write_pagelist api]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Jim Rees <rees@umich.edu>
[SQUASHME: pnfsblock: mds_offset is set in the generic layer]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
[pnfsblock: mark IO error with NFS_LAYOUT_{RW|RO}_FAILED]
Signed-off-by: Peng Tao <peng_tao@emc.com>
[pnfsblock: SQUASHME: adjust to API change]
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
[pnfsblock: fixup blksize alignment in bl_setup_layoutcommit]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
[pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS]
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
[pnfsblock: handle errors when read or write pagelist.]
Signed-off-by: Zhang Jingwang <yyalone@gmail.com>
[pnfs-block: use new write_pagelist api]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Note: When upper layer's read/write request cannot be fulfilled, the block
layout driver shouldn't silently mark the page as error. It should do
what can be done and leave the rest to the upper layer. To do so, we
should set rdata/wdata->res.count properly.
When upper layer re-send the read/write request to finish the rest
part of the request, pgbase is the position where we should start at.
[pnfsblock: mark IO error with NFS_LAYOUT_{RW|RO}_FAILED]
Signed-off-by: Peng Tao <peng_tao@emc.com>
[pnfsblock: read path error handling]
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
[pnfsblock: handle errors when read or write pagelist.]
Signed-off-by: Zhang Jingwang <yyalone@gmail.com>
[pnfs-block: use new read_pagelist api]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In blocklayout driver. There are two things happening
while layoutcommit/cleanup.
1. the modified extents are encoded.
2. On cleanup the extents are put back on the layout rw
extents list, for reads.
In the new system where actual xdr encoding is done in
encode_layoutcommit() directly into xdr buffer, these are
the new commit stages:
1. On setup_layoutcommit, the range is adjusted as before
and a structure is allocated for communication with
bl_encode_layoutcommit && bl_cleanup_layoutcommit
(Generic layer provides a void-star to hang it on)
2. bl_encode_layoutcommit is called to do the actual
encoding directly into xdr. The commit-extent-list is not
freed and is stored on above structure.
FIXME: The code is not yet converted to the new XDR cleanup
3. On cleanup the commit-extent-list is put back by a call
to set_to_rw() as before, but with no need for XDR decoding
of the list as before. And the commit-extent-list is freed.
Finally allocated structure is freed.
[rm inode and pnfs_layout_hdr args from cleanup_layoutcommit()]
Signed-off-by: Jim Rees <rees@umich.edu>
[pnfsblock: introduce bl_committing list]
Signed-off-by: Peng Tao <peng_tao@emc.com>
[pnfsblock: SQUASHME: adjust to API change]
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
[blocklayout: encode_layoutcommit implementation]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
[pnfsblock: fix bug setting up layoutcommit.]
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
[pnfsblock: cleanup_layoutcommit wants a status parameter]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In blocklayout driver. There are two things happening
while layoutcommit/cleanup.
1. the modified extents are encoded.
2. On cleanup the extents are put back on the layout rw
extents list, for reads.
In the new system where actual xdr encoding is done in
encode_layoutcommit() directly into xdr buffer, these are
the new commit stages:
1. On setup_layoutcommit, the range is adjusted as before
and a structure is allocated for communication with
bl_encode_layoutcommit && bl_cleanup_layoutcommit
(Generic layer provides a void-star to hang it on)
2. bl_encode_layoutcommit is called to do the actual
encoding directly into xdr. The commit-extent-list is not
freed and is stored on above structure.
FIXME: The code is not yet converted to the new XDR cleanup
3. On cleanup the commit-extent-list is put back by a call
to set_to_rw() as before, but with no need for XDR decoding
of the list as before. And the commit-extent-list is freed.
Finally allocated structure is freed.
[rm inode and pnfs_layout_hdr args from cleanup_layoutcommit()]
[pnfsblock: get rid of deprecated xdr macros]
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
[blocklayout: encode_layoutcommit implementation]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
[pnfsblock: fix bug setting up layoutcommit.]
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
[pnfsblock: prevent commit list corruption]
[pnfsblock: fix layoutcommit with an empty opaque]
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Adds working implementations of various support functions
to handle INVAL extents, needed by writes, such as
bl_mark_sectors_init and bl_is_sector_init.
[pnfsblock: fix 64-bit compiler warnings for extent manipulation]
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
[Implement release_inval_marks]
Signed-off-by: Zhang Jingwang <zhangjingwang@nrchpc.ac.cn>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Implement bl_find_get_extent(), one of the core extent manipulation
routines.
[pnfsblock: Lookup list entry of layouts and tags in reverse order]
Signed-off-by: Zhang Jingwang <zhangjingwang@nrchpc.ac.cn>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Jim Rees <rees@umich.edu>
pnfsblock: fix print format warnings for sector_t and size_t
gcc spews warnings about these on x86_64, e.g.:
fs/nfs/blocklayout/blocklayout.c:74: warning: format ‘%Lu’ expects type ‘long long unsigned int’, but argument 2 has type ‘sector_t’
fs/nfs/blocklayout/blocklayout.c:388: warning: format ‘%d’ expects type ‘int’, but argument 5 has type ‘size_t’
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
XDR decodes the block layout payload sent in LAYOUTGET result, storing
the result in an extent list.
[pnfsblock: get rid of deprecated xdr macros]
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
[pnfsblock: fix bug getting pnfs_layout_type in translate_devid().]
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Call GETDEVICELIST during mount, then call and parse GETDEVICEINFO
for each device returned.
[pnfsblock: get rid of deprecated xdr macros]
Signed-off-by: Jim Rees <rees@umich.edu>
[pnfsblock: fix pnfs_deviceid references]
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
[pnfsblock: fix print format warnings for sector_t and size_t]
[pnfs-block: #include <linux/vmalloc.h>]
[pnfsblock: no PNFS_NFS_SERVER]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[pnfsblock: fix bug determining size of striped volume]
[pnfsblock: fix oops when using multiple devices]
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
[pnfsblock: get rid of vmap and deviceid->area structure]
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Replace a stub, so that extents underlying the layouts are properly
added, merged, or ignored as necessary.
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
[pnfsblock: delete the new node before put it]
Signed-off-by: Mingyang Guo <guomingyang@nrchpc.ac.cn>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This gives layout driver a chance to cleanup structures they put in at
encode_layoutcommit.
Signed-off-by: Andy Adamson <andros@netapp.com>
[fixup layout header pointer for layoutcommit]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
[rm inode and pnfs_layout_hdr args from cleanup_layoutcommit()]
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
To allow layout driver to issue getdevicelist at mount time, and clean up
at umount time.
[fixup non NFS_V4_1 set_pnfs_layoutdriver definition]
[pnfs: pass mntfh down the init_pnfs path]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Using NFS4_MAX_UINT64 will break current protocol.
[Needed in v3.0]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Peng Tao