Use a Coccinelle spatch to replace CM helper functions with IBA_GET/SET
versions. Applied with
$ spatch --sp-file edits.sp --in-place drivers/infiniband/core/cm.c
The spatch file was generated using the template pattern:
@@
expression val;
{struct} *msg;
@@
- {old_setter}
+ IBA_SET({new_name}, msg, val)
@@
{struct} *msg;
@@
- {old_getter}
+ IBA_GET({new_name}, msg)
Iterated for every IBA_CHECK_GET()/IBA_CHECK_GET() pairing. Touched up
with clang-format after.
Link: https://lore.kernel.org/r/20200116170037.30109-4-jgg@ziepe.ca
Tested-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no separation between RDMA-CM wire format as it is declared in
IBTA and kernel logic which implements needed support. Such situation
causes to many mistakes in conversion between big-endian (wire format)
and CPU format used by kernel. It also mixes RDMA core code with
combination of uXX and beXX variables.
The idea that all accesses to IBA definitions will go through special
GET/SET macros to ensure that no conversion mistakes are made. The
shifting and masking required to read the value is automatically deduced
using the field offset description from the tables in the IBA
specification.
This starts with the CM MADs described in IBTA release 1.3 volume 1.
To confirm that the new macros behave the same as the old accessors a
self-test is included in this patch.
Each macro replacing a straightforward struct field compile-time tests
that the new field has the same offsetof() and width as the old field.
For the fields with accessor functions a runtime test, the 'all ones'
value is placed in a dummy message and read back in several ways to
confirm that both approaches give identical results.
Later patches in this series delete the self test.
This creates a tested table of new field name, old field name(s) and some
meta information like BE coding for the functions which will be used in
the next patches.
Link: https://lore.kernel.org/r/20200116170037.30109-3-jgg@ziepe.ca
Link: https://lore.kernel.org/r/20191212093830.316934-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Tested-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Access the two fields through wrappers, like all other fields, to make it
clearer what is happening.
Link: https://lore.kernel.org/r/20200116170037.30109-2-jgg@ziepe.ca
Tested-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
A user can change the operational GUID (a.k.a affective GUID) through
link/infiniband. Therefore it is preferred to return the currently set
GUID if it exists instead of the operational.
This way the PF can query which VF GUID will be set in the next bind. In
order to align with MAC address, zero is returned if administrative GUID
is not set.
For example, before setting administrative GUID:
$ ip link show
ib0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 4092 qdisc mq state UP mode DEFAULT group default qlen 256
link/infiniband 00:00:00:08:fe:80:00:00:00:00:00:00:52:54:00:c0:fe:12:34:55 brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
vf 0 link/infiniband 00:00:00:08:fe:80:00:00:00:00:00:00:52:54:00:c0:fe:12:34:55 brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff,
spoof checking off, NODE_GUID 00:00:00:00:00:00:00:00, PORT_GUID 00:00:00:00:00:00:00:00, link-state auto, trust off, query_rss off
Then:
$ ip link set ib0 vf 0 node_guid 11:00:af:21:cb:05:11:00
$ ip link set ib0 vf 0 port_guid 22:11:af:21:cb:05:11:00
After setting administrative GUID:
$ ip link show
ib0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 4092 qdisc mq state UP mode DEFAULT group default qlen 256
link/infiniband 00:00:00:08:fe:80:00:00:00:00:00:00:52:54:00:c0:fe:12:34:55 brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
vf 0 link/infiniband 00:00:00:08:fe:80:00:00:00:00:00:00:52:54:00:c0:fe:12:34:55 brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff,
spoof checking off, NODE_GUID 11:00:af:21:cb:05:11:00, PORT_GUID 22:11:af:21:cb:05:11:00, link-state auto, trust off, query_rss off
Fixes: 9c0015ef09 ("IB/mlx5: Implement callbacks for getting VFs GUID attributes")
Link: https://lore.kernel.org/r/20200116120048.12744-1-leon@kernel.org
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The set of entry->driver_removed is missing locking, protect it with
xa_lock() which is held by the only reader.
Otherwise readers may continue to see driver_removed = false after
rdma_user_mmap_entry_remove() returns and may continue to try and
establish new mmaps.
Fixes: 3411f9f01b ("RDMA/core: Create mmap database and cookie helper functions")
Link: https://lore.kernel.org/r/20200115202041.GA17199@ziepe.ca
Reviewed-by: Gal Pressman <galpress@amazon.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The following series extends MR creation routines to allow creation of
user MRs through kernel ULPs as a proxy. The immediate use case is to
allow RDS to work over FS-DAX, which requires ODP (on-demand-paging)
MRs to be created and such MRs were not possible to create prior this
series.
The first part of this patchset extends RDMA to have special verb
ib_reg_user_mr(). The common use case that uses this function is a
userspace application that allocates memory for HCA access but the
responsibility to register the memory at the HCA is on an kernel ULP.
This ULP acts as an agent for the userspace application.
The second part provides advise MR functionality for ULPs. This is
integral part of ODP flows and used to trigger pagefaults in advance
to prepare memory before running working set.
The third part is actual user of those in-kernel APIs.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQT1m3YD37UfMCUQBNwp8NhrnBAZsQUCXiVO8AAKCRAp8NhrnBAZ
scTrAP9gb0d3qv0IOtHw5aGI1DAgjTUn/SzUOnsjDEn7DIoh9gEA2+ZmaEyLXKrl
+UcZb31auy5P8ueJYokRLhLAyRcOIAg=
=yaHb
-----END PGP SIGNATURE-----
Merge tag 'rds-odp-for-5.5' into rdma.git for-next
From https://git.kernel.org/pub/scm/linux/kernel/git/leon/linux-rdma
Leon Romanovsky says:
====================
Use ODP MRs for kernel ULPs
The following series extends MR creation routines to allow creation of
user MRs through kernel ULPs as a proxy. The immediate use case is to
allow RDS to work over FS-DAX, which requires ODP (on-demand-paging)
MRs to be created and such MRs were not possible to create prior this
series.
The first part of this patchset extends RDMA to have special verb
ib_reg_user_mr(). The common use case that uses this function is a
userspace application that allocates memory for HCA access but the
responsibility to register the memory at the HCA is on an kernel ULP.
This ULP acts as an agent for the userspace application.
The second part provides advise MR functionality for ULPs. This is
integral part of ODP flows and used to trigger pagefaults in advance
to prepare memory before running working set.
The third part is actual user of those in-kernel APIs.
====================
* tag 'rds-odp-for-5.5':
net/rds: Use prefetch for On-Demand-Paging MR
net/rds: Handle ODP mr registration/unregistration
net/rds: Detect need of On-Demand-Paging memory registration
RDMA/mlx5: Fix handling of IOVA != user_va in ODP paths
IB/mlx5: Mask out unsupported ODP capabilities for kernel QPs
RDMA/mlx5: Don't fake udata for kernel path
IB/mlx5: Add ODP WQE handlers for kernel QPs
IB/core: Add interface to advise_mr for kernel users
IB/core: Introduce ib_reg_user_mr
IB: Allow calls to ib_umem_get from kernel ULPs
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The following series extends MR creation routines to allow creation of
user MRs through kernel ULPs as a proxy. The immediate use case is to
allow RDS to work over FS-DAX, which requires ODP (on-demand-paging)
MRs to be created and such MRs were not possible to create prior this
series.
The first part of this patchset extends RDMA to have special verb
ib_reg_user_mr(). The common use case that uses this function is a
userspace application that allocates memory for HCA access but the
responsibility to register the memory at the HCA is on an kernel ULP.
This ULP acts as an agent for the userspace application.
The second part provides advise MR functionality for ULPs. This is
integral part of ODP flows and used to trigger pagefaults in advance
to prepare memory before running working set.
The third part is actual user of those in-kernel APIs.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQT1m3YD37UfMCUQBNwp8NhrnBAZsQUCXiVO8AAKCRAp8NhrnBAZ
scTrAP9gb0d3qv0IOtHw5aGI1DAgjTUn/SzUOnsjDEn7DIoh9gEA2+ZmaEyLXKrl
+UcZb31auy5P8ueJYokRLhLAyRcOIAg=
=yaHb
-----END PGP SIGNATURE-----
Merge tag 'rds-odp-for-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/leon/linux-rdma
Leon Romanovsky says:
====================
Use ODP MRs for kernel ULPs
The following series extends MR creation routines to allow creation of
user MRs through kernel ULPs as a proxy. The immediate use case is to
allow RDS to work over FS-DAX, which requires ODP (on-demand-paging)
MRs to be created and such MRs were not possible to create prior this
series.
The first part of this patchset extends RDMA to have special verb
ib_reg_user_mr(). The common use case that uses this function is a
userspace application that allocates memory for HCA access but the
responsibility to register the memory at the HCA is on an kernel ULP.
This ULP acts as an agent for the userspace application.
The second part provides advise MR functionality for ULPs. This is
integral part of ODP flows and used to trigger pagefaults in advance
to prepare memory before running working set.
The third part is actual user of those in-kernel APIs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
iscsit_close_connection() calls isert_wait_conn(). Due to commit
e9d3009cb9 both functions call target_wait_for_sess_cmds() although that
last function should be called only once. Fix this by removing the
target_wait_for_sess_cmds() call from isert_wait_conn() and by only calling
isert_wait_conn() after target_wait_for_sess_cmds().
Fixes: e9d3009cb9 ("scsi: target: iscsi: Wait for all commands to finish before freeing a session").
Link: https://lore.kernel.org/r/20200116044737.19507-1-bvanassche@acm.org
Reported-by: Rahul Kundu <rahul.kundu@chelsio.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This merge syncs with mlx5-next latest HW bits and layout updates for next
features, in addition one patch that improves
mlx5_create_auto_grouped_flow_table() API across all mlx5 users.
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Refactor mlx5_create_auto_grouped_flow_table
net/mlx5e: Add discard counters per priority
net/mlx5e: Expose FEC feilds and related capability bit
net/mlx5: Add mlx5_ifc definitions for connection tracking support
net/mlx5: Add copy header action struct layout
net/mlx5: Expose resource dump register mapping
net/mlx5: Add structures and defines for MIRC register
net/mlx5: Read MCAM register groups 1 and 2
net/mlx5: Add structures layout for new MCAM access reg groups
net/mlx5: Expose vDPA emulation device capabilities
net/mlx5: Add Virtio Emulation related device capabilities
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Refactor mlx5_create_auto_grouped_flow_table() to use ft_attr param
which already carries the max_fte, prio and flags memebers, and is
used the same in similar mlx5_create_flow_table() function.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
In procedure mlx4_ib_add_gid(), if the driver is unable to update the FW
gid table, there is a memory leak in the driver's copy of the gid table:
the gid entry's context buffer is not freed.
If such an error occurs, free the entry's context buffer, and mark the
entry as available (by setting its context pointer to NULL).
Fixes: e26be1bfef ("IB/mlx4: Implement ib_device callbacks")
Link: https://lore.kernel.org/r/20200115085050.73746-1-leon@kernel.org
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce the following RoCE accelerator counters:
* roce_adp_retrans - number of adaptive retransmission for RoCE traffic.
* roce_adp_retrans_to - number of times RoCE traffic reached time out
due to adaptive retransmission.
* roce_slow_restart - number of times RoCE slow restart was used.
* roce_slow_restart_cnps - number of times RoCE slow restart
generate CNP packets.
* roce_slow_restart_trans - number of times RoCE slow restart change
state to slow restart.
Link: https://lore.kernel.org/r/20200115145459.83280-3-leon@kernel.org
Signed-off-by: Avihai Horon <avihaih@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Enable relaxed ordering in the mkey context when requested. As relaxed
ordering is not currently supported in UMR, disable UMR usage for relaxed
ordering MRs.
Link: https://lore.kernel.org/r/1578506740-22188-11-git-send-email-yishaih@mellanox.com
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add the core support field to METHOD_GET_CONTEXT, this field should
represent capabilities that are not device-specific.
Return support for optional access flags for memory regions. User-space
will use this capability to mask the optional access flags for
unsupporting kernels.
Link: https://lore.kernel.org/r/1578506740-22188-10-git-send-email-yishaih@mellanox.com
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
As part of adding a range of optional access flags that drivers need to be
able to accept, mask this range inside efa driver. This will prevent the
driver from failing when an access flag from that range is passed.
Link: https://lore.kernel.org/r/1578506740-22188-8-git-send-email-yishaih@mellanox.com
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Allow future extensions of the get context command through the uverbs
ioctl kabi.
Unlike the uverbs version this does not return an async_fd as well, that
has to be done with another command.
Link: https://lore.kernel.org/r/1578506740-22188-5-git-send-email-yishaih@mellanox.com
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This lock only serializes ucontext creation. Instead of checking the
ucontext_lock during destruction hold the existing hw_destroy_rwsem during
creation, which is the standard pattern for object creation.
The simplification of locking is needed for the next patch.
Link: https://lore.kernel.org/r/1578506740-22188-4-git-send-email-yishaih@mellanox.com
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Allow the async FD to be allocated separately from the context.
This is necessary to introduce the ioctl to create a context, as an ioctl
should only ever create a single uobject at a time.
If multiple async FDs are created then the first one is used to deliver
affiliated events from any ib_uevent_object, with all subsequent ones will
receive only unaffiliated events.
Link: https://lore.kernel.org/r/1578506740-22188-3-git-send-email-yishaih@mellanox.com
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Till recently it was not possible for userspace to specify a different
IOVA, but with the new ibv_reg_mr_iova() library call this can be done.
To compute the user_va we must compute:
user_va = (iova - iova_start) + user_va_start
while being cautious of overflow and other math problems.
The iova is not reliably stored in the mmkey when the MR is created. Only
the cached creation path (the common one) set it, so it must also be set
when creating uncached MRs.
Fix the weird use of iova when computing the starting page index in the
MR. In the normal case, when iova == umem.address:
iova & (~(BIT(page_shift) - 1)) ==
ALIGN_DOWN(umem.address, odp->page_size) ==
ib_umem_start(odp)
And when iova is different using it in math with a user_va is wrong.
Finally, do not allow an implicit ODP to be created with a non-zero IOVA
as we have no support for that.
Fixes: 7bdf65d411 ("IB/mlx5: Handle page faults")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The ODP handler for WQEs in RQ or SRQ is not implented for kernel QPs.
Therefore don't report support in these if query comes from a kernel user.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
One of the steps in ODP page fault handler for WQEs is to read a WQE
from a QP send queue or receive queue buffer at a specific index.
Since the implementation of this buffer is different between kernel and
user QP the implementation of the handler needs to be aware of that and
handle it in a different way.
ODP for kernel MRs is currently supported only for RDMA_READ
and RDMA_WRITE operations so change the handler to
- read a WQE from a kernel QP send queue
- fail if access to receive queue or shared receive queue is
required for a kernel QP
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Allow ULPs to call advise_mr, so they can control ODP regions
in the same way as user space applications.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Add ib_reg_user_mr() for kernel ULPs to register user MRs.
The common use case that uses this function is a userspace application
that allocates memory for HCA access but the responsibility to register
the memory at the HCA is on an kernel ULP. This ULP that acts as an agent
for the userspace application.
This function is intended to be used without a user context so vendor
drivers need to be aware of calling reg_user_mr() device operation with
udata equal to NULL.
Among all drivers, i40iw is the only driver which relies on presence
of udata, so check udata existence for that driver.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
So far the assumption was that ib_umem_get() and ib_umem_odp_get()
are called from flows that start in UVERBS and therefore has a user
context. This assumption restricts flows that are initiated by ULPs
and need the service that ib_umem_get() provides.
This patch changes ib_umem_get() and ib_umem_odp_get() to get IB device
directly by relying on the fact that both UVERBS and ULPs sets that
field correctly.
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Some SRP targets that do not support specification SRP-2, put the garbage
to the reserved bits of the SRP login response. The problem was not
detected for a long time because the SRP initiator ignored those bits. But
now one of them is used as SRP_LOGIN_RSP_IMMED_SUPP. And it causes a
critical error on the target when the initiator sends immediate data.
The ib_srp module has a use_imm_date parameter to enable or disable
immediate data manually. But it does not help in the above case, because
use_imm_date is ignored at handling the SRP login response. The problem is
definitely caused by a bug on the target side, but the initiator's
behavior also does not look correct. The initiator should not use
immediate data if use_imm_date is disabled by a user.
This commit adds an additional checking of use_imm_date at the handling of
SRP login response to avoid unexpected use of immediate data.
Fixes: 882981f4a4 ("RDMA/srp: Add support for immediate data")
Link: https://lore.kernel.org/r/20200115133055.30232-1-sergeygo@mellanox.com
Signed-off-by: Sergey Gorenko <sergeygo@mellanox.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The SGE buffer size and max_inline data should be derived from the size of
the WQE. Each value individually sets the WQE size, so compute the actual
sizes based on the actual WQE size and configure the QP with the maximums.
Also fix the missing return of the actual maximum capability to the caller.
Link: https://lore.kernel.org/r/1578962480-17814-3-git-send-email-rao.shoaib@oracle.com
Signed-off-by: Rao Shoaib <rao.shoaib@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The ucontext parameter is unused, remove it.
Link: https://lore.kernel.org/r/20200114085706.82229-6-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The {} brackets are not needed according to the Linux coding style.
Link: https://lore.kernel.org/r/20200114085706.82229-5-galpress@amazon.com
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Firas JahJah <firasj@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Various clarifications and updates to the documentation of the device
definitions.
No functional changes in this patch.
Link: https://lore.kernel.org/r/20200114085706.82229-4-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
To support extended atomic operations including cmp & swap and fetch & add
of 8 bytes, 16 bytes, 32 bytes, 64 bytes in userspace, some field in qpc
should be configured.
Link: https://lore.kernel.org/r/1579052546-11746-1-git-send-email-liweihang@huawei.com
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Get pf capabilities from firmware according to different hardwares, if it
fails, all capabilities will be set with a default value.
Link: https://lore.kernel.org/r/1578738761-3176-4-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
pf capabilities are set by default for hip08 previously which should
depends on different types of hardware. So add new interfaces to get them
from firmware.
Link: https://lore.kernel.org/r/1578738761-3176-3-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In struct hns_roce_caps, max_srq_sg and max_srqwqes is unused, and
max_srqs has the same effect with num_srqs. So remove them from this
structrue.
Link: https://lore.kernel.org/r/1578738761-3176-2-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The writer for async_file holds the ucontext_lock, while the readers are
left unlocked. Most readers rely on an implicit locking, either by having
a uobject (which cannot be created before a context) or by holding the
ib_ufile kref.
However ib_uverbs_free_hw_resources() has no implicit lock and has a
possible race. Make this all clear and sane by using READ_ONCE
consistently.
Link: https://lore.kernel.org/r/1578504126-9400-15-git-send-email-yishaih@mellanox.com
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This makes async events aligned with completion events as both are full
uobjects of FD type and use the same uobject lifecycle.
A bunch of duplicate code is consolidated and the general flow between the
two FDs is now very similar.
Link: https://lore.kernel.org/r/1578504126-9400-14-git-send-email-yishaih@mellanox.com
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that all callers provide a non-NULL attrs the ufile is redundant.
Adjust things so that the context handling is done inside alloc_uobj,
and the ib_uverbs_get_ucontext_file() is avoided if we already have the
context.
Link: https://lore.kernel.org/r/1578504126-9400-13-git-send-email-yishaih@mellanox.com
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This function works on an ib_uverbs_async_file. Accept that as a parameter
instead of the struct ib_uverbs_file.
Consoldiate all the callers working from an ib_uevent_object to a single
function and locate the async_file directly from the struct ib_uobject
instead of using context_ptr.
Link: https://lore.kernel.org/r/1578504126-9400-11-git-send-email-yishaih@mellanox.com
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Any uobject that sends events into the async_event_file should be using
ib_uevent_object so it can use the standard uevent based helper
functions. CQ pushes events into both the async_event and the comp_channel
in an open coded way. Move the async events related stuff to
ib_uevent_object.
Link: https://lore.kernel.org/r/1578504126-9400-6-git-send-email-yishaih@mellanox.com
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This is a left over from an earlier version that creates a lot of
complexity for error unwind, particularly for FD uobjects.
The only reason this was done is so that anon_inode_get_file() could be
called with the final fops and a fully setup uobject. Both need to be
setup since unwinding anon_inode_get_file() via fput will call the
driver's release().
Now that the driver does not provide release, we no longer need to worry
about this complicated sequence, simply create the struct file at the
start and allow the core code's release function to deal with the abort
case.
This allows all the confusing error paths around commit to be removed.
Link: https://lore.kernel.org/r/1578504126-9400-5-git-send-email-yishaih@mellanox.com
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
With the new FD structure the async commands do not need to hold any
references while running. The existing mlx5_cmd_exec_cb() and
mlx5_cmd_cleanup_async_ctx() provide enough synchronization to ensure
that all outstanding commands are completed before the uobject can be
destructed.
Remove the now confusing get_file() and the type erasure of the
devx_async_cmd_event_file.
Link: https://lore.kernel.org/r/1578504126-9400-4-git-send-email-yishaih@mellanox.com
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
FD uobjects have a weird split between the struct file and uobject
world. Simplify this to make them pure uobjects and use a generic release
method for all struct file operations.
This fixes the control flow so that mlx5_cmd_cleanup_async_ctx() is always
called before erasing the linked list contents to make the concurrancy
simpler to understand.
For this to work the uobject destruction must fence anything that it is
cleaning up - the design must not rely on struct file lifetime.
Only deliver_event() relies on the struct file to when adding new events
to the queue, add a is_destroyed check under lock to block it.
Link: https://lore.kernel.org/r/1578504126-9400-3-git-send-email-yishaih@mellanox.com
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
dispatch_event_fd() runs from a notifier with minimal locking, and relies
on RCU and a file refcount to keep the uobject and eventfd alive.
As the next patch wants to remove the file_operations release function
from the drivers, re-organize things so that the devx_event_notifier()
path uses the existing RCU to manage the lifetime of the uobject and
eventfd.
Move the refcount puts to a call_rcu so that the objects are guaranteed to
exist and remove the indirect file refcount.
Link: https://lore.kernel.org/r/1578504126-9400-2-git-send-email-yishaih@mellanox.com
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
After device disassociation the uapi_objects are destroyed and freed,
however it is still possible that core code can be holding a kref on the
uobject. When it finally goes to uverbs_uobject_free() via the kref_put()
it can trigger a use-after-free on the uapi_object.
Since needs_kfree_rcu is a micro optimization that only benefits file
uobjects, just get rid of it. There is no harm in using kfree_rcu even if
it isn't required, and the number of involved objects is small.
Link: https://lore.kernel.org/r/20200113143306.GA28717@ziepe.ca
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add mmap support for VAR, it uses the 'offset' command mode with
involvement of IB core APIs to find the previously allocated mmap entry.
Link: https://lore.kernel.org/r/20191212110928.334995-6-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce VAR object and its alloc/destroy KABI methods. The internal
implementation uses the IB core API to manage mmap/munamp calls.
Link: https://lore.kernel.org/r/20191212110928.334995-5-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When hardware is in resetting stage, we may can't poll back all the
expected work completions as the hardware won't generate cqe anymore.
This patch allows the driver to compose the expected wc instead of the
hardware during resetting stage. Once the hardware finished resetting, we
can poll cq from hardware again.
Link: https://lore.kernel.org/r/1578572412-25756-1-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Driver should first check whether the sge is valid, then fill the valid
sge and the caculated total into hardware, otherwise invalid sges will
cause an error.
Fixes: 52e3b42a2f ("RDMA/hns: Filter for zero length of sge in hip08 kernel mode")
Fixes: 7bdee4158b ("RDMA/hns: Fill sq wqe context of ud type in hip08")
Link: https://lore.kernel.org/r/1578571852-13704-1-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This counter, RxShrErr, is required for error analysis and debug.
Fixes: 7724105686 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20200106134235.119356.29123.stgit@awfm-01.aw.intel.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
All other code paths increment some form of drop counter.
This was missed in the original implementation.
Fixes: 82c2611daa ("staging/rdma/hfi1: Handle packets with invalid RHF on context 0")
Link: https://lore.kernel.org/r/20200106134228.119356.96828.stgit@awfm-01.aw.intel.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Packet receiving functions returns int value, and yet the return values
are not used at all.
This patch converts the functions to return void.
Link: https://lore.kernel.org/r/20200106134222.119356.84098.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
IRQ name was connected to IRQ type, this is not sufficient and it would be
better to use name as argument to msix_request_irq instead of assigning it
to variables when function is called.
Index argument was required to generate name and now it can be removed.
To generate name correctly helpers function were added and updated.
Link: https://lore.kernel.org/r/20200106134216.119356.44478.stgit@awfm-01.aw.intel.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add an auto activate routine for use by the interrupt handler.
Link: https://lore.kernel.org/r/20200106134210.119356.43079.stgit@awfm-01.aw.intel.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch pushes special case drop logic into an API to be shared by all
interrupt handlers.
Additionally, convert do_drop to a bool.
Link: https://lore.kernel.org/r/20200106134203.119356.36962.stgit@awfm-01.aw.intel.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Tracing interrupts, incrementing interrupt counter and ASPM are part that
will be reused by HFI1 receive IRQ handlers.
Create common function to have shared code in one place.
Link: https://lore.kernel.org/r/20200106134157.119356.32656.stgit@awfm-01.aw.intel.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch eliminate special cases by adding a fast_handler member to the
receive context and changes to the fast handler as specified in the new
variable. Initialize the variable as soon as the setting for dma tail is
known when the context is created.
Setting fast path is called every time when any context has entered slow
path. Add function to check if contexts is using fast path and do not set
fast path when it is already done to improve RCD fastpath setting.
Link: https://lore.kernel.org/r/20200106134150.119356.87558.stgit@awfm-01.aw.intel.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Move routines and defines associated with hdrq size validation to a chip
specific routine since the limits are specific to the device.
Fix incorrect value for min size 2 -> 32
CSR writes should also be in chip.c.
Create a chip routine to write the hdrq specific CSRs and call as
appropriate.
Link: https://lore.kernel.org/r/20200106134144.119356.74312.stgit@awfm-01.aw.intel.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This should not be using ib_dev to test for disassociation, during
disassociation is_closed is set under lock and the waitq is triggered.
Instead check is_closed and be sure to re-obtain the lock to test the
value after the wait_event returns.
Fixes: 036b106357 ("IB/uverbs: Enable device removal when there are active user space applications")
Link: https://lore.kernel.org/r/1578504126-9400-12-git-send-email-yishaih@mellanox.com
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
HPAGE_SHIFT is only defined on architectures that support hugepages:
drivers/infiniband/core/umem_odp.c: In function 'ib_umem_odp_get':
drivers/infiniband/core/umem_odp.c:245:26: error: 'HPAGE_SHIFT' undeclared (first use in this function); did you mean 'PAGE_SHIFT'?
Enclose this in an #ifdef.
Fixes: 9ff1b6466a ("IB/core: Fix ODP with IB_ACCESS_HUGETLB handling")
Link: https://lore.kernel.org/r/20200109084740.2872079-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This lock is used to protect the qp->open_list linked list. As a side
effect it seems to also globally serialize the qp event_handler, but it
isn't clear if that is a deliberate design.
Link: https://lore.kernel.org/r/20191212113024.336702-5-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Given that ib_cache structure has only single member now, merge the cache
lock directly in the ib_device.
Link: https://lore.kernel.org/r/20191212113024.336702-4-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently when the low level driver notifies Pkey, GID, and port change
events they are notified to the registered handlers in the order they are
registered.
IB core and other ULPs such as IPoIB are interested in GID, LID, Pkey
change events.
Since all GID queries done by ULPs are serviced by IB core, and the IB
core deferes cache updates to a work queue, it is possible for other
clients to see stale cache data when they handle their own events.
For example, the below call tree shows how ipoib will call
rdma_query_gid() concurrently with the update to the cache sitting in the
WQ.
mlx5_ib_handle_event()
ib_dispatch_event()
ib_cache_event()
queue_work() -> slow cache update
[..]
ipoib_event()
queue_work()
[..]
work handler
ipoib_ib_dev_flush_light()
__ipoib_ib_dev_flush()
ipoib_dev_addr_changed_valid()
rdma_query_gid() <- Returns old GID, cache not updated.
Move all the event dispatch to a work queue so that the cache update is
always done before any clients are notified.
Fixes: f35faa4ba9 ("IB/core: Simplify ib_query_gid to always refer to cache")
Link: https://lore.kernel.org/r/20191212113024.336702-3-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When IB device profile initialization completes, device is marked as
active.
However, IB device is not marked inactive, during device removal flow. It
should be the mirror of the add flow.
Hence, mark it inactive during remove sequence.
Link: https://lore.kernel.org/r/20191212113024.336702-2-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fix some coding style issuses without changing logic of codes, most of the
modification is unreasonable line breaks and alignments.
Link: https://lore.kernel.org/r/1578313276-29080-8-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There are already necessary prints in outer function, prints in
hns_roce_function_clear() may confuse users. So these prints is removed.
Link: https://lore.kernel.org/r/1578313276-29080-6-git-send-email-liweihang@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Current state and new state of qp won't be configured when modifying qp,
so these two redundant parameters should be removed.
Link: https://lore.kernel.org/r/1578313276-29080-5-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The values used to represent service type of RC and UD should be
interchanged according to design of hardware. And it's better to define
these types in enumeration than macros.
Link: https://lore.kernel.org/r/1578313276-29080-4-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
hns_roce_init_eq_table() is an unused function that only retains its
declaration in driver.
Link: https://lore.kernel.org/r/1578313276-29080-3-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Sample trace events:
kworker/u29:0-300 [007] 120.042217: cq_alloc: cq.id=4 nr_cqe=161 comp_vector=2 poll_ctx=WORKQUEUE
<idle>-0 [002] 120.056292: cq_schedule: cq.id=4
kworker/2:1H-482 [002] 120.056402: cq_process: cq.id=4 wake-up took 109 [us] from interrupt
kworker/2:1H-482 [002] 120.056407: cq_poll: cq.id=4 requested 16, returned 1
<idle>-0 [002] 120.067503: cq_schedule: cq.id=4
kworker/2:1H-482 [002] 120.067537: cq_process: cq.id=4 wake-up took 34 [us] from interrupt
kworker/2:1H-482 [002] 120.067541: cq_poll: cq.id=4 requested 16, returned 1
<idle>-0 [002] 120.067657: cq_schedule: cq.id=4
kworker/2:1H-482 [002] 120.067672: cq_process: cq.id=4 wake-up took 15 [us] from interrupt
kworker/2:1H-482 [002] 120.067674: cq_poll: cq.id=4 requested 16, returned 1
...
systemd-1 [002] 122.392653: cq_schedule: cq.id=4
kworker/2:1H-482 [002] 122.392688: cq_process: cq.id=4 wake-up took 35 [us] from interrupt
kworker/2:1H-482 [002] 122.392693: cq_poll: cq.id=4 requested 16, returned 16
kworker/2:1H-482 [002] 122.392836: cq_poll: cq.id=4 requested 16, returned 16
kworker/2:1H-482 [002] 122.392970: cq_poll: cq.id=4 requested 16, returned 16
kworker/2:1H-482 [002] 122.393083: cq_poll: cq.id=4 requested 16, returned 16
kworker/2:1H-482 [002] 122.393195: cq_poll: cq.id=4 requested 16, returned 3
Several features to note in this output:
- The WCE count and context type are reported at allocation time
- The CPU and kworker for each CQ is evident
- The CQ's restracker ID is tagged on each trace event
- CQ poll scheduling latency is measured
- Details about how often single completions occur versus multiple
completions are evident
- The cost of the ULP's completion handler is recorded
Link: https://lore.kernel.org/r/20191218201815.30584.3481.stgit@manet.1015granger.net
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Record state transitions as each connection is established. The IP address
of both peers and the Type of Service is reported. These trace points are
not in performance hot paths.
Also, record each cm_event_handler call to ULPs. This eliminates the need
for each ULP to add its own similar trace point in its CM event handler
function.
These new trace points appear in a new trace subsystem called "rdma_cma".
Sample events:
<...>-220 [004] 121.430733: cm_id_create: cm.id=0
<...>-472 [003] 121.430991: cm_event_handler: cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0 ADDR_RESOLVED (0/0)
<...>-472 [003] 121.430995: cm_event_done: cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0 result=0
<...>-472 [003] 121.431172: cm_event_handler: cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0 ROUTE_RESOLVED (2/0)
<...>-472 [003] 121.431174: cm_event_done: cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0 result=0
<...>-220 [004] 121.433480: cm_qp_create: cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0 pd.id=2 qp_type=RC send_wr=4091 recv_wr=256 qp_num=521 rc=0
<...>-220 [004] 121.433577: cm_send_req: cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0 qp_num=521
kworker/1:2-973 [001] 121.436190: cm_send_mra: cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0
kworker/1:2-973 [001] 121.436340: cm_send_rtu: cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0
kworker/1:2-973 [001] 121.436359: cm_event_handler: cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0 ESTABLISHED (9/0)
kworker/1:2-973 [001] 121.436365: cm_event_done: cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0 result=0
<...>-1975 [005] 123.161954: cm_disconnect: cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0
<...>-1975 [005] 123.161974: cm_sent_dreq: cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0
<...>-220 [004] 123.162102: cm_disconnect: cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0
kworker/0:1-13 [000] 123.162391: cm_event_handler: cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0 DISCONNECTED (10/0)
kworker/0:1-13 [000] 123.162393: cm_event_done: cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0 result=0
<...>-220 [004] 123.164456: cm_qp_destroy: cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0 qp_num=521
<...>-220 [004] 123.165290: cm_id_destroy: cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0
Some features to note:
- restracker ID of the rdma_cm_id is tagged on each trace event
- The source and destination IP addresses and TOS are reported
- CM event upcalls are shown with decoded event and status
- CM state transitions are reported
- rdma_cm_id lifetime events are captured
- The latency of ULP CM event handlers is reported
- Lifetime events of associated QPs are reported
- Device removal and insertion is reported
This patch is based on previous work by:
Saeed Mahameed <saeedm@mellanox.com>
Mukesh Kacker <mukesh.kacker@oracle.com>
Ajaykumar Hotchandani <ajaykumar.hotchandani@oracle.com>
Aron Silverton <aron.silverton@oracle.com>
Avinash Repaka <avinash.repaka@oracle.com>
Somasundaram Krishnasamy <somasundaram.krishnasamy@oracle.com>
Link: https://lore.kernel.org/r/20191218201810.30584.3052.stgit@manet.1015granger.net
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
vm_ops is now initialized in ib_uverbs_mmap() with the recent rdma mmap
API changes. Earlier it was done in rdma_umap_priv_init() which would not
be called unless a driver called rdma_user_mmap_io() in its mmap.
i40iw does not use the rdma_user_mmap_io API but sets the vma's
vm_private_data to a driver object. This now conflicts with the vm_op
rdma_umap_close as priv pointer points to the i40iw driver object instead
of the private data setup by core when rdma_user_mmap_io is called. This
leads to a crash in rdma_umap_close with a mmap put being called when it
should not have.
Remove the redundant setting of the vma private_data in i40iw as it is not
used. Also move i40iw over to use the rdma_user_mmap_io API. This gives
the extra protection of having the mappings zapped when the context is
detsroyed.
BUG: unable to handle page fault for address: 0000000100000001
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] SMP PTI
CPU: 6 PID: 9528 Comm: rping Kdump: loaded Not tainted 5.5.0-rc4+ #117
Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Q87M-D2H, BIOS F7 01/17/2014
RIP: 0010:rdma_user_mmap_entry_put+0xa/0x30 [ib_core]
RSP: 0018:ffffb340c04c7c38 EFLAGS: 00010202
RAX: 00000000ffffffff RBX: ffff9308e7be2a00 RCX: 000000000000cec0
RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000100000001
RBP: ffff9308dc7641f0 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: ffffffff8d4414d8 R12: ffff93075182c780
R13: 0000000000000001 R14: ffff93075182d2a8 R15: ffff9308e2ddc840
FS: 0000000000000000(0000) GS:ffff9308fdc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000100000001 CR3: 00000002e0412004 CR4: 00000000001606e0
Call Trace:
rdma_umap_close+0x40/0x90 [ib_uverbs]
remove_vma+0x43/0x80
exit_mmap+0xfd/0x1b0
mmput+0x6e/0x130
do_exit+0x290/0xcc0
? get_signal+0x152/0xc40
do_group_exit+0x46/0xc0
get_signal+0x1bd/0xc40
? prepare_to_wait_event+0x97/0x190
do_signal+0x36/0x630
? remove_wait_queue+0x60/0x60
? __audit_syscall_exit+0x1d9/0x290
? rcu_read_lock_sched_held+0x52/0x90
? kfree+0x21c/0x2e0
exit_to_usermode_loop+0x4f/0xc3
do_syscall_64+0x1ed/0x270
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7fae715a81fd
Code: Bad RIP value.
RSP: 002b:00007fae6e163cb0 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
RAX: fffffffffffffe00 RBX: 00007fae6e163d30 RCX: 00007fae715a81fd
RDX: 0000000000000010 RSI: 00007fae6e163cf0 RDI: 0000000000000003
RBP: 00000000013413a0 R08: 00007fae68000000 R09: 0000000000000017
R10: 0000000000000001 R11: 0000000000000293 R12: 00007fae680008c0
R13: 00007fae6e163cf0 R14: 00007fae717c9804 R15: 00007fae6e163ed0
CR2: 0000000100000001
---[ end trace b33d58d3a06782cb ]---
RIP: 0010:rdma_user_mmap_entry_put+0xa/0x30 [ib_core]
Fixes: b86deba977 ("RDMA/core: Move core content from ib_uverbs to ib_core")
Link: https://lore.kernel.org/r/20200107162223.1745-1-shiraz.saleem@intel.com
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Clean the code by deleting ARP functions, which are not called anyway.
Link: https://lore.kernel.org/r/20191212093830.316934-46-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Clean the code by deleting LAP functions, which are not called anyway.
Link: https://lore.kernel.org/r/20191212093830.316934-43-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
A NULL pointer can be returned by in_dev_get(). Thus add a corresponding
check so that a NULL pointer dereference will be avoided at this place.
Fixes: 8e06af711b ("i40iw: add main, hdr, status")
Link: https://lore.kernel.org/r/1577672668-46499-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The type of mmap_offset should be u64 instead of int to match the type of
mminfo.offset. If otherwise, after we create several thousands of CQs, it
will run into overflow issues.
Link: https://lore.kernel.org/r/20191227113613.5020-1-kejiewei.cn@gmail.com
Signed-off-by: Jiewei Ke <kejiewei.cn@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fixes coccicheck warning:
drivers/infiniband/hw/mlx5/mr.c:150:2-26: WARNING: Assignment of 0/1 to bool variable
drivers/infiniband/hw/mlx5/mr.c:1455:2-26: WARNING: Assignment of 0/1 to bool variable
drivers/infiniband/hw/mlx5/qp.c:1874:6-20: WARNING: Assignment of 0/1 to bool variable
Link: https://lore.kernel.org/r/1577176812-2238-6-git-send-email-zhengbin13@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
As VMAs for a given range might not be available as part of the
registration phase in ODP.
ib_init_umem_odp() considered the expected page shift value that was
previously set and initializes its internals accordingly.
If memory isn't backed by physical contiguous pages aligned to a hugepage
boundary an error will be set as part of the page fault flow and come back
to the user as some failed RDMA operation.
Fixes: 0008b84ea9 ("IB/umem: Add support to huge ODP")
Link: https://lore.kernel.org/r/20191222124649.52300-4-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The nr_pages argument of get_user_pages_remote() should always be in terms
of the system page size, not the MR page size. Use PAGE_SIZE instead of
umem_odp->page_shift.
Fixes: 403cd12e2c ("IB/umem: Add contiguous ODP support")
Link: https://lore.kernel.org/r/20191222124649.52300-3-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Building MR translation table in the ODP case requires additional
flexibility, namely random access to DMA addresses. Make both direct and
indirect ODP MR use same code path, separated from the non-ODP MR code
path.
With the restructuring the correct page_shift is now used around
__mlx5_ib_populate_pas().
Fixes: d2183c6f19 ("RDMA/umem: Move page_shift from ib_umem to ib_odp_umem")
Link: https://lore.kernel.org/r/20191222124649.52300-2-leon@kernel.org
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When a TID RDMA ACK to RESYNC request is received, the flow PSNs for
pending TID RDMA WRITE segments will be adjusted with the next flow
generation number, based on the resync_psn value extracted from the flow
PSN of the TID RDMA ACK packet. The resync_psn value indicates the last
flow PSN for which a TID RDMA WRITE DATA packet has been received by the
responder and the requester should resend TID RDMA WRITE DATA packets,
starting from the next flow PSN.
However, if resync_psn points to the last flow PSN for a segment and the
next segment flow PSN starts with a new generation number, use of the old
resync_psn to adjust the flow PSN for the next segment will lead to
miscalculation, resulting in WARN_ON and sge rewinding errors:
WARNING: CPU: 4 PID: 146961 at /nfs/site/home/phcvs2/gitrepo/ifs-all/components/Drivers/tmp/rpmbuild/BUILD/ifs-kernel-updates-3.10.0_957.el7.x86_64/hfi1/tid_rdma.c:4764 hfi1_rc_rcv_tid_rdma_ack+0x8f6/0xa90 [hfi1]
Modules linked in: ib_ipoib(OE) hfi1(OE) rdmavt(OE) rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfsv3 nfs_acl nfs lockd grace fscache iTCO_wdt iTCO_vendor_support skx_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm irqbypass crc32_pclmul ghash_clmulni_intel ib_isert iscsi_target_mod target_core_mod aesni_intel lrw gf128mul glue_helper ablk_helper cryptd rpcrdma sunrpc opa_vnic ast ttm ib_iser libiscsi drm_kms_helper scsi_transport_iscsi ipmi_ssif syscopyarea sysfillrect sysimgblt fb_sys_fops drm joydev ipmi_si pcspkr sg drm_panel_orientation_quirks ipmi_devintf lpc_ich i2c_i801 ipmi_msghandler wmi rdma_ucm ib_ucm ib_uverbs acpi_cpufreq acpi_power_meter ib_umad rdma_cm ib_cm iw_cm ip_tables ext4 mbcache jbd2 sd_mod crc_t10dif crct10dif_generic crct10dif_pclmul i2c_algo_bit crct10dif_common
crc32c_intel e1000e ib_core ahci libahci ptp libata pps_core nfit libnvdimm [last unloaded: rdmavt]
CPU: 4 PID: 146961 Comm: kworker/4:0H Kdump: loaded Tainted: G W OE ------------ 3.10.0-957.el7.x86_64 #1
Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.0X.02.0117.040420182310 04/04/2018
Workqueue: hfi0_0 _hfi1_do_tid_send [hfi1]
Call Trace:
<IRQ> [<ffffffff9e361dc1>] dump_stack+0x19/0x1b
[<ffffffff9dc97648>] __warn+0xd8/0x100
[<ffffffff9dc9778d>] warn_slowpath_null+0x1d/0x20
[<ffffffffc05d28c6>] hfi1_rc_rcv_tid_rdma_ack+0x8f6/0xa90 [hfi1]
[<ffffffffc05c21cc>] hfi1_kdeth_eager_rcv+0x1dc/0x210 [hfi1]
[<ffffffffc05c23ef>] ? hfi1_kdeth_expected_rcv+0x1ef/0x210 [hfi1]
[<ffffffffc0574f15>] kdeth_process_eager+0x35/0x90 [hfi1]
[<ffffffffc0575b5a>] handle_receive_interrupt_nodma_rtail+0x17a/0x2b0 [hfi1]
[<ffffffffc056a623>] receive_context_interrupt+0x23/0x40 [hfi1]
[<ffffffff9dd4a294>] __handle_irq_event_percpu+0x44/0x1c0
[<ffffffff9dd4a442>] handle_irq_event_percpu+0x32/0x80
[<ffffffff9dd4a4cc>] handle_irq_event+0x3c/0x60
[<ffffffff9dd4d27f>] handle_edge_irq+0x7f/0x150
[<ffffffff9dc2e554>] handle_irq+0xe4/0x1a0
[<ffffffff9e3795dd>] do_IRQ+0x4d/0xf0
[<ffffffff9e36b362>] common_interrupt+0x162/0x162
<EOI> [<ffffffff9dfa0f79>] ? swiotlb_map_page+0x49/0x150
[<ffffffffc05c2ed1>] hfi1_verbs_send_dma+0x291/0xb70 [hfi1]
[<ffffffffc05c2c40>] ? hfi1_wait_kmem+0xf0/0xf0 [hfi1]
[<ffffffffc05c3f26>] hfi1_verbs_send+0x126/0x2b0 [hfi1]
[<ffffffffc05ce683>] _hfi1_do_tid_send+0x1d3/0x320 [hfi1]
[<ffffffff9dcb9d4f>] process_one_work+0x17f/0x440
[<ffffffff9dcbade6>] worker_thread+0x126/0x3c0
[<ffffffff9dcbacc0>] ? manage_workers.isra.25+0x2a0/0x2a0
[<ffffffff9dcc1c31>] kthread+0xd1/0xe0
[<ffffffff9dcc1b60>] ? insert_kthread_work+0x40/0x40
[<ffffffff9e374c1d>] ret_from_fork_nospec_begin+0x7/0x21
[<ffffffff9dcc1b60>] ? insert_kthread_work+0x40/0x40
This patch fixes the issue by adjusting the resync_psn first if the flow
generation has been advanced for a pending segment.
Fixes: 9e93e967f7 ("IB/hfi1: Add a function to receive TID RDMA ACK packet")
Link: https://lore.kernel.org/r/20191219231920.51069.37147.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Comments need to be with the definition of rvt_restart_sge().
Other comments were duplicated in sw/rdmavt/rc.c and were removed.
Fixes: 385156c5f2 ("IB/hfi: Move RC functions into a header file")
Link: https://lore.kernel.org/r/20191219211934.58387.88014.stgit@awfm-01.aw.intel.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The current debugfs output for receive contexts (rcds), stops after the
kernel receive contexts have been displayed. This is not enough
information to fully diagnose packet drops.
Display all of the receive contexts.
Augment the output with some more context information.
Limit the ring buffer header output to 5 entries to avoid overextending
the sequential file output.
Fixes: bf808b5039 ("IB/hfi1: Add kernel receive context info to debugfs")
Link: https://lore.kernel.org/r/20191219211928.58387.20737.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe