openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
900,402 Commits 19 Branches 27 Tags 3.4 GiB
Commit Graph

10809 Commits

Author SHA1 Message Date
Stephen Hemminger 3127642dc1 netem: change mailing list 
The old netem mailing list was inactive and recently was targeted by
spammers. Switch to just using netdev mailing list which is where all
the real change happens.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2020-01-28 10:54:55 +01:00
Ingo Molnar 74777eaf7a Merge branch 'core/documentation' into core/urgent, to pick up single commit 
Signed-off-by: Ingo Molnar <mingo@kernel.org>
 2020-01-28 07:53:12 +01:00
Linus Torvalds 3d3b44a61a The interrupt departement provides: 
- A mechanism to shield isolated tasks from managed interrupts:
 
    The affinity of managed interrupts is completely controlled by the
    kernel and user space has no influence on them. The reason is that
    the automatically assigned affinity correlates to the multi-queue
    CPU handling of block devices.
 
    If the generated affinity mask spaws both housekeeping and isolated CPUs
    the interrupt could be routed to an isolated CPU which would then be
    disturbed by I/O submitted by a housekeeping CPU.
 
    The new mechamism ensures that as long as one housekeeping CPU is online
    in the assigned affinity mask the interrupt is routed to a housekeeping
    CPU.
 
    If there is no online housekeeping CPU in the affinity mask, then the
    interrupt is routed to an isolated CPU to keep the device queue intact,
    but unless the isolated CPU submits I/O by itself these interrupts are
    not raised.
 
  - A small addon to the device tree irqdomain core code to avoid
    duplication in irq chip drivers
 
  - Conversion of the SiFive PLIC to hierarchical domains
 
  - The usual pile of new irq chip drivers: SiFive GPIO, Aspeed SCI, NXP
    INTMUX, Meson A1 GPIO
 
  - The first cut of support for the new ARM GICv4.1
 
  - The usual pile of fixes and improvements in core and driver code
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl4vcbETHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoezyEADBPf0ipu5+KeTtCR+DjRAO8o0wM0J/
 JNkRkSrS/qENSda/d6pZE2AWpqlDOs6apg+SNGkv0knM+1Xy94nLOf4zJBsR+GW0
 w2jw68egnyB2QZtm/BvOJL+qCoixcObg5sLt0165pDdKzyDNWeCMtRU+QAw42T/l
 WC2QrhjKKqYST1m+UgDf1UXz8TDGIW4muRP9UiG0Uwc0LU6cG2H4OmGn0bYissaT
 JTG75pzGqUH3kZ1a1qD28nGyoY85BXz1iV5/IvIPaQbkQARbvfMbh1KvAnGhJj7N
 96rjMpOGv2/kv1FI+4FUy6w5Wn4EyW2OaCtB/oUCFNcZvrNNgvglxCRQkkO8yb3D
 VOOm595ICm3EnIfxBpSzhgvVl5MY39g6qRb6Rpnna+8eRtrYnytMBdvhY0OGlG8/
 cZYZDay0nzhY6vq023iw1YMDKqft7TR1R+6w1iPL7nXHXW99Dhv87d1Fjt0CqphD
 NIoNDgxciIyfMbMBvcg1qPe/g3L8+cAKNzGsIwIU9GneEZFBk3/piGcBlFpoEEOK
 2QKvks3QRXMx+qVWkIqy3LZKV9EAQlb9Lpjaa1ec5d4m/EdACm19OpZpqoCljPtw
 9vdaMz4ZxvUbwjih3VnVPklZCiVGiKj1j0iw5v3FCHh4MUljzCrxNMqK/U9CR8H0
 uid3EX8YMi+DXA==
 =E2VR
 -----END PGP SIGNATURE-----

Merge tag 'irq-core-2020-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq updates from Thomas Gleixner:
 "The interrupt departement provides:

   - A mechanism to shield isolated tasks from managed interrupts:

     The affinity of managed interrupts is completely controlled by the
     kernel and user space has no influence on them. The reason is that
     the automatically assigned affinity correlates to the multi-queue
     CPU handling of block devices.

     If the generated affinity mask spaws both housekeeping and isolated
     CPUs the interrupt could be routed to an isolated CPU which would
     then be disturbed by I/O submitted by a housekeeping CPU.

     The new mechamism ensures that as long as one housekeeping CPU is
     online in the assigned affinity mask the interrupt is routed to a
     housekeeping CPU.

     If there is no online housekeeping CPU in the affinity mask, then
     the interrupt is routed to an isolated CPU to keep the device queue
     intact, but unless the isolated CPU submits I/O by itself these
     interrupts are not raised.

   - A small addon to the device tree irqdomain core code to avoid
     duplication in irq chip drivers

   - Conversion of the SiFive PLIC to hierarchical domains

   - The usual pile of new irq chip drivers: SiFive GPIO, Aspeed SCI,
     NXP INTMUX, Meson A1 GPIO

   - The first cut of support for the new ARM GICv4.1

   - The usual pile of fixes and improvements in core and driver code"

* tag 'irq-core-2020-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
  genirq, sched/isolation: Isolate from handling managed interrupts
  irqchip/gic-v4.1: Allow direct invalidation of VLPIs
  irqchip/gic-v4.1: Suppress per-VLPI doorbell
  irqchip/gic-v4.1: Add VPE INVALL callback
  irqchip/gic-v4.1: Add VPE eviction callback
  irqchip/gic-v4.1: Add VPE residency callback
  irqchip/gic-v4.1: Add mask/unmask doorbell callbacks
  irqchip/gic-v4.1: Plumb skeletal VPE irqchip
  irqchip/gic-v4.1: Implement the v4.1 flavour of VMOVP
  irqchip/gic-v4.1: Don't use the VPE proxy if RVPEID is set
  irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP
  irqchip/gic-v4.1: VPE table (aka GICR_VPROPBASER) allocation
  irqchip/gic-v3: Add GICv4.1 VPEID size discovery
  irqchip/gic-v3: Detect GICv4.1 supporting RVPEID
  irqchip/gic-v3-its: Fix get_vlpi_map() breakage with doorbells
  irqdomain: Fix a memory leak in irq_domain_push_irq()
  irqchip: Add NXP INTMUX interrupt multiplexer support
  dt-bindings: interrupt-controller: Add binding for NXP INTMUX interrupt multiplexer
  irqchip: Define EXYNOS_IRQ_COMBINER
  irqchip/meson-gpio: Add support for meson a1 SoCs
  ...
 2020-01-27 17:22:21 -08:00
Linus Torvalds e279160f49 The timekeeping and timers departement provides: 
- Time namespace support:
 
     If a container migrates from one host to another then it expects that
     clocks based on MONOTONIC and BOOTTIME are not subject to
     disruption. Due to different boot time and non-suspended runtime these
     clocks can differ significantly on two hosts, in the worst case time
     goes backwards which is a violation of the POSIX requirements.
 
     The time namespace addresses this problem. It allows to set offsets for
     clock MONOTONIC and BOOTTIME once after creation and before tasks are
     associated with the namespace. These offsets are taken into account by
     timers and timekeeping including the VDSO.
 
     Offsets for wall clock based clocks (REALTIME/TAI) are not provided by
     this mechanism. While in theory possible, the overhead and code
     complexity would be immense and not justified by the esoteric potential
     use cases which were discussed at Plumbers '18.
 
     The overhead for tasks in the root namespace (host time offsets = 0) is
     in the noise and great effort was made to ensure that especially in the
     VDSO. If time namespace is disabled in the kernel configuration the
     code is compiled out.
 
     Kudos to Andrei Vagin and Dmitry Sofanov who implemented this feature
     and kept on for more than a year addressing review comments, finding
     better solutions. A pleasant experience.
 
   - Overhaul of the alarmtimer device dependency handling to ensure that
     the init/suspend/resume ordering is correct.
 
   - A new clocksource/event driver for Microchip PIT64
 
   - Suspend/resume support for the Hyper-V clocksource
 
   - The usual pile of fixes, updates and improvements mostly in the
     driver code.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl4vbTcTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoXT2D/96iJ3G9Snn2khEQP3XS2rYmtDGw7NO
 m1n96falwWeGe6zreU80R2Jge5nLxQtNhRoMPLLee1GpHwRC6lvqEqgdZ4LMBrD2
 JqV7Gzg8Urmdh+hpDsyTCpeEWEzoMKxiFOX8PxwctqUhM4szEe5iQg2YQsg85Jw2
 vG6M93N2xwDILh4rhEMbKjo+5ZmYn7c1RQvpGOSmpKOj940W/N7H2HBsFhdaJ1Kw
 FW5pFv1211PaU5RV2YNb2dMeeMTT1N3e2VN4Dkadoxp47pb+725gNHEBEjmV9poG
 Lp4IhzGAPnj8zVD88icQZSTaK3gUHMClxprJ0Pf84WEtiH7SeGu8BPYyu77+oNDe
 yzcctDJNyCWXkzmaP/fe/HLc0TStbvNAJ5Tagp4BC75gzebeb4/n8RtRT0fKeDYL
 pxpDPKDAPU7p1JSjxiWAtshqjBycWNY3Z49bA7/VhKBhnv8BDyBPGlYd7/4xrbGr
 RK7DQNXJwaJaiNJ7p5PiaFxGzNyB0B9sThD/slSlEInIKb4h9YzWr0TV+NB62VnB
 sDcN+tpLbRPz5/5cHGGfxR0+zKWpfyai8pzbmmaXEaKssjRYwyvcac5EZdgbWpbK
 k7CqAjoWLA2P+tGeePNJOf5JYK6Vmdyh4clmuwM0zOiRJ9NlWUyMf3z7QYILs4RO
 UAI+6opYlZEPAw==
 =x3qT
 -----END PGP SIGNATURE-----

Merge tag 'timers-core-2020-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer updates from Thomas Gleixner:
 "The timekeeping and timers departement provides:

   - Time namespace support:

     If a container migrates from one host to another then it expects
     that clocks based on MONOTONIC and BOOTTIME are not subject to
     disruption. Due to different boot time and non-suspended runtime
     these clocks can differ significantly on two hosts, in the worst
     case time goes backwards which is a violation of the POSIX
     requirements.

     The time namespace addresses this problem. It allows to set offsets
     for clock MONOTONIC and BOOTTIME once after creation and before
     tasks are associated with the namespace. These offsets are taken
     into account by timers and timekeeping including the VDSO.

     Offsets for wall clock based clocks (REALTIME/TAI) are not provided
     by this mechanism. While in theory possible, the overhead and code
     complexity would be immense and not justified by the esoteric
     potential use cases which were discussed at Plumbers '18.

     The overhead for tasks in the root namespace (ie where host time
     offsets = 0) is in the noise and great effort was made to ensure
     that especially in the VDSO. If time namespace is disabled in the
     kernel configuration the code is compiled out.

     Kudos to Andrei Vagin and Dmitry Sofanov who implemented this
     feature and kept on for more than a year addressing review
     comments, finding better solutions. A pleasant experience.

   - Overhaul of the alarmtimer device dependency handling to ensure
     that the init/suspend/resume ordering is correct.

   - A new clocksource/event driver for Microchip PIT64

   - Suspend/resume support for the Hyper-V clocksource

   - The usual pile of fixes, updates and improvements mostly in the
     driver code"

* tag 'timers-core-2020-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits)
  alarmtimer: Make alarmtimer_get_rtcdev() a stub when CONFIG_RTC_CLASS=n
  alarmtimer: Use wakeup source from alarmtimer platform device
  alarmtimer: Make alarmtimer platform device child of RTC device
  alarmtimer: Update alarmtimer_get_rtcdev() docs to reflect reality
  hrtimer: Add missing sparse annotation for __run_timer()
  lib/vdso: Only read hrtimer_res when needed in __cvdso_clock_getres()
  MIPS: vdso: Define BUILD_VDSO32 when building a 32bit kernel
  clocksource/drivers/hyper-v: Set TSC clocksource as default w/ InvariantTSC
  clocksource/drivers/hyper-v: Untangle stimers and timesync from clocksources
  clocksource/drivers/timer-microchip-pit64b: Fix sparse warning
  clocksource/drivers/exynos_mct: Rename Exynos to lowercase
  clocksource/drivers/timer-ti-dm: Fix uninitialized pointer access
  clocksource/drivers/timer-ti-dm: Switch to platform_get_irq
  clocksource/drivers/timer-ti-dm: Convert to devm_platform_ioremap_resource
  clocksource/drivers/em_sti: Fix variable declaration in em_sti_probe
  clocksource/drivers/em_sti: Convert to devm_platform_ioremap_resource
  clocksource/drivers/bcm2835_timer: Fix memory leak of timer
  clocksource/drivers/cadence-ttc: Use ttc driver as platform driver
  clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support
  clocksource/drivers/hyper-v: Reserve PAGE_SIZE space for tsc page
  ...
 2020-01-27 16:47:05 -08:00
Linus Torvalds b1dba24731 selinux/stable-5.6 PR 20200127 
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAl4vRu8UHHBhdWxAcGF1
 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXPE1BAA0yg0npafRIrjIMU5IkpDh8TvywWF
 DDcarqBXNSIXJtl3EWr7LynvKKqBs4jN7R0ZRMYc5e/6LrSUBvds4GTPm7dOOW4C
 cIlAjXTlek2LvHf1/6aNE2SdlkNBYOYo//ifVH+zAn6VOQHGZXBd31oxwPLNW5mP
 vVS7OIGhWPcviUebxD7mNmgS/ODoZS/ZL434RK07FhMnN/jEdfuNnu87uz7WAK1p
 MWmqzB2tkwrj5uN5wRU6+9R82xYGbo6Xq5uEsFidMrlrn+cguuf+xPrrejT1qVnU
 8r72MKKRjfObMRj1fQt3VC0feFt2WyC0qAk3XwKljmllGXZIzV1IPmrui9pLD5Ti
 IhLgIEBtMpJgrYhFwl3yMe1EUwdQ/WAlbf8GnoIWyzm0oOo0kaN5BfrvlYtYYmN3
 i2xpDOcQ0J4I3tA7zXMpD5tWzDzePxxadZ367qtwRp/AhbL4bnqbvP7vaPtZczz2
 pTEGFYIbeqfLCwy2PWHZOVYj83bidmC0lQ3PTFsC26Upui750MdFa7toQV70Hiqo
 EdpOzxUHbn6pPuGy7Rey26ybOiZPkL1q1Czoa6jbNyutv8ts2eZNyuCL25QKKzvE
 42AvSzA0lt8taDbSbNu+FiexR619oEt15hSrHrRslunecumYfNjJyk85ZCloh+XL
 dnD1bPytgl1G4i8=
 =2jFm
 -----END PGP SIGNATURE-----

Merge tag 'selinux-pr-20200127' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux

Pull SELinux update from Paul Moore:
 "This is one of the bigger SELinux pull requests in recent years with
  28 patches. Everything is passing our test suite and the highlights
  are below:

   - Mark CONFIG_SECURITY_SELINUX_DISABLE as deprecated. We're some time
     away from actually attempting to remove this in the kernel, but the
     only distro we know that still uses it (Fedora) is working on
     moving away from this so we want to at least let people know we are
     planning to remove it.

   - Reorder the SELinux hooks to help prevent bad things when SELinux
     is disabled at runtime. The proper fix is to remove the
     CONFIG_SECURITY_SELINUX_DISABLE functionality (see above) and just
     take care of it at boot time (e.g. "selinux=0").

   - Add SELinux controls for the kernel lockdown functionality,
     introducing a new SELinux class/permissions: "lockdown { integrity
     confidentiality }".

   - Add a SELinux control for move_mount(2) that reuses the "file {
     mounton }" permission.

   - Improvements to the SELinux security label data store lookup
     functions to speed up translations between our internal label
     representations and the visible string labels (both directions).

   - Revisit a previous fix related to SELinux inode auditing and
     permission caching and do it correctly this time.

   - Fix the SELinux access decision cache to cleanup properly on error.
     In some extreme cases this could limit the cache size and result in
     a decrease in performance.

   - Enable SELinux per-file labeling for binderfs.

   - The SELinux initialized and disabled flags were wrapped with
     accessors to ensure they are accessed correctly.

   - Mark several key SELinux structures with __randomize_layout.

   - Changes to the LSM build configuration to only build
     security/lsm_audit.c when needed.

   - Changes to the SELinux build configuration to only build the IB
     object cache when CONFIG_SECURITY_INFINIBAND is enabled.

   - Move a number of single-caller functions into their callers.

   - Documentation fixes (/selinux -> /sys/fs/selinux).

   - A handful of cleanup patches that aren't worth mentioning on their
     own, the individual descriptions have plenty of detail"

* tag 'selinux-pr-20200127' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: (28 commits)
  selinux: fix regression introduced by move_mount(2) syscall
  selinux: do not allocate ancillary buffer on first load
  selinux: remove redundant allocation and helper functions
  selinux: remove redundant selinux_nlmsg_perm
  selinux: fix wrong buffer types in policydb.c
  selinux: reorder hooks to make runtime disable less broken
  selinux: treat atomic flags more carefully
  selinux: make default_noexec read-only after init
  selinux: move ibpkeys code under CONFIG_SECURITY_INFINIBAND.
  selinux: remove redundant msg_msg_alloc_security
  Documentation,selinux: fix references to old selinuxfs mount point
  selinux: deprecate disabling SELinux and runtime
  selinux: allow per-file labelling for binderfs
  selinuxfs: use scnprintf to get real length for inode
  selinux: remove set but not used variable 'sidtab'
  selinux: ensure the policy has been loaded before reading the sidtab stats
  selinux: ensure we cleanup the internal AVC counters on error in avc_update()
  selinux: randomize layout of key structures
  selinux: clean up selinux_enabled/disabled/enforcing_boot
  selinux: remove unnecessary selinux cred request
  ...
 2020-01-27 15:38:15 -08:00
Linus Torvalds 55816dc1a5 ACPI updates for 5.6-rc1 
- Update the ACPICA code in the kernel to upstream revision
    20200110 including:
 
    * Update of copyright notices to 2020 (Bob Moore).
 
    * Dispatcher fix to always generate buffer objects for the ASL
      create_field() operator (Maximilian Luz).
 
    * Debugger cleanup (Colin Ian King).
 
    * Disassembler change to create buffer fields in
      ACPI_PARSE_LOAD_PASS1 (Erik Kaneda).
 
    * UNIX line ending support for non-windows builds in acpisrc
      (Erik Kaneda).
 
  - Update the list of ACPICA maintainers (Rafael Wysocki).
 
  - Add Intel Tiger Lake ACPI device IDs to the ACPI DPTF, ACPI fan,
    int340x_thermal and intel-hid drivers (Gayatri Kammela).
 
  - Make the ACPI fan driver create additional sysfs attributes to
    expose power states information for fans (Srinivas Pandruvada).
 
  - Fix up the ACPI battery driver to deal with unexpected battery
    capacity information in a better way (Hans de Goede).
 
  - Add ACPI backlight quirks for Lenovo E41-25/45 and MSI MS-7721
    boards (Aaron Ma, Hans de Goede).
 
  - Add DMI quirk for Razer Blade Stealth 13 late 2019 lid switch
    to the ACPI button driver (Jason Ekstrand).
 
  - Drop TIMER_DEFERRABLE from the GHES polling mode timer function
    flags to make it run precisely at the configured time (Bhaskar
    Upadhaya).
 
  - Fix race condition related to the reference counting of query
    handlers in the ACPI EC driver (Rafael Wysocki).
 
  - Fix ACPI tools build issue (Zhengyuan Liu).
 
  - Replace dma_request_slave_channel() with dma_request_chan() in the
    firmware guide documentation for ACPI (Peter Ujfalusi).
 
  - Fix typo in a comment and clean up function parameter data type
    inconsistencies (Kacper Piwiński, Tian Tao).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl4u2n8SHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxT6MP/jjGgOHOLiw7pUxR0PZ0pr8VZ8NcSxp6
 8YpqfD5ABu/Y+/FYUacMRpMXQ1Jy6KMLLzb2uLInBi2f+BksucDpwpQoK1uRc6u3
 JS7Q78OrOr7RZHqWsUHWVdI1A+bpyhbkwyw2b45HRfY4tLRe9+X7s2Dh+i3qip4E
 A7jPM2fcHgkJV6V0EPwG2BG5bKudlfvWLvySsHl8d0AwDf+GbLrrGY7hbPArQW1C
 tBxt5DG/5WUT8RqJoXaCMHbuqGdihs71WHxU9nIOww04In6MfQHYgt7+FVT1J329
 KZXFfvJaJWBNO9u7QoUvSe8qpHLFpUC2/ZW9TawSkHXrYhAsIO8jKoJXZGSncKZZ
 huU4owh6cHhPJ3YMFj84I5C5YSUaMeX3sbZu0vqObTPMcwB4HIrkHyMAR5zgu+Zb
 kBDTTExeRSdSN6IzfvC2xbpW2G6Q3WuuyVd7klNN7E+7ZRkQAOuq5Pr+gdMejlza
 BrYkK0UdRN+V1YnjENxf+86hAbuTiD329tYNiQxzgyb+Y8dLrugLb9n0P5RWfLbt
 r2r/tBKMEq2Pzis55ICTEwMfSXixomJDdQ8+XWmV8Evdbq7O1zq1KHRZbFFYVclS
 aqWXimFCfSwPdXfvwN7xPa2khNtaKxcsKb7mxq3R31Thzs29iFmJMxFf6ousaMdf
 VoYkCQiwQTpC
 =qOut
 -----END PGP SIGNATURE-----

Merge tag 'acpi-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "These update the ACPICA code in the kernel to the most recent upstream
  revision (20200110), add new hardware support to a handful of ACPI
  drivers, make the ACPI fan driver expose power states information for
  fans, add some more quirks, fix bugs and clean up assorted things.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20200110
     including:
      - Update of copyright notices to 2020 (Bob Moore).
      - Dispatcher fix to always generate buffer objects for the ASL
        create_field() operator (Maximilian Luz).
      - Debugger cleanup (Colin Ian King).
      - Disassembler change to create buffer fields in
        ACPI_PARSE_LOAD_PASS1 (Erik Kaneda).
      - UNIX line ending support for non-windows builds in acpisrc (Erik
        Kaneda).

   - Update the list of ACPICA maintainers (Rafael Wysocki).

   - Add Intel Tiger Lake ACPI device IDs to the ACPI DPTF, ACPI fan,
     int340x_thermal and intel-hid drivers (Gayatri Kammela).

   - Make the ACPI fan driver create additional sysfs attributes to
     expose power states information for fans (Srinivas Pandruvada).

   - Fix up the ACPI battery driver to deal with unexpected battery
     capacity information in a better way (Hans de Goede).

   - Add ACPI backlight quirks for Lenovo E41-25/45 and MSI MS-7721
     boards (Aaron Ma, Hans de Goede).

   - Add DMI quirk for Razer Blade Stealth 13 late 2019 lid switch to
     the ACPI button driver (Jason Ekstrand).

   - Drop TIMER_DEFERRABLE from the GHES polling mode timer function
     flags to make it run precisely at the configured time (Bhaskar
     Upadhaya).

   - Fix race condition related to the reference counting of query
     handlers in the ACPI EC driver (Rafael Wysocki).

   - Fix ACPI tools build issue (Zhengyuan Liu).

   - Replace dma_request_slave_channel() with dma_request_chan() in the
     firmware guide documentation for ACPI (Peter Ujfalusi).

   - Fix typo in a comment and clean up function parameter data type
     inconsistencies (Kacper Piwiński, Tian Tao)"

* tag 'acpi-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (25 commits)
  ACPICA: Update version to 20200110
  ACPICA: All acpica: Update copyrights to 2020 Including tool signons.
  apei/ghes: Do not delay GHES polling
  ACPI: button: Add DMI quirk for Razer Blade Stealth 13 late 2019 lid switch
  ACPI: PPTT: Consistently use unsigned int as parameter type
  ACPI: EC: Reference count query handlers under lock
  ACPICA: Update the list of maintainers
  ACPICA: Update version to 20191213
  ACPICA: Dispatcher: always generate buffer objects for ASL create_field() operator
  ACPICA: acpisrc: add unix line ending support for non-windows build
  ACPICA: Disassembler: create buffer fields in ACPI_PARSE_LOAD_PASS1
  ACPICA: debugger: fix spelling mistake "adress" -> "address"
  ACPI: video: Do not export a non working backlight interface on MSI MS-7721 boards
  docs: firmware-guide: ACPI: Replace dma_request_slave_channel() with dma_request_chan()
  thermal: int340x_thermal: Add Tiger Lake ACPI device IDs
  platform/x86: intel-hid: Add Tiger Lake ACPI device ID
  ACPI: fan: Add Tiger Lake ACPI device ID
  ACPI: DPTF: Add Tiger Lake ACPI device IDs
  ACPI: fan: Expose fan performance state information
  tools/power/acpi: fix compilation error
  ...
 2020-01-27 11:48:47 -08:00
Linus Torvalds 6d277aca48 Power management updates for 5.6-rc1 
- Update the ACPI processor driver in order to export
    acpi_processor_evaluate_cst() to the code outside of it, add
    ACPI support to the intel_idle driver based on that and clean
    up that driver somewhat (Rafael Wysocki).
 
  - Add an admin guide document for the intel_idle driver (Rafael
    Wysocki).
 
  - Clean up cpuidle core and drivers, enable compilation testing
    for some of them (Benjamin Gaignard, Krzysztof Kozlowski, Rafael
    Wysocki, Yangtao Li).
 
  - Fix reference counting of OPP (operating performance points) table
    structures (Viresh Kumar).
 
  - Add support for CPR (Core Power Reduction) to the AVS (Adaptive
    Voltage Scaling) subsystem (Niklas Cassel, Colin Ian King,
    YueHaibing).
 
  - Add support for TigerLake Mobile and JasperLake to the Intel RAPL
    power capping driver (Zhang Rui).
 
  - Update cpufreq drivers:
 
    * Add i.MX8MP support to imx-cpufreq-dt (Anson Huang).
 
    * Fix usage of a macro in loongson2_cpufreq (Alexandre Oliva).
 
    * Fix cpufreq policy reference counting issues in s3c and
      brcmstb-avs (chenqiwu).
 
    * Fix ACPI table reference counting issue and HiSilicon quirk
      handling in the CPPC driver (Hanjun Guo).
 
    * Clean up spelling mistake in intel_pstate (Harry Pan).
 
    * Convert the kirkwood and tegra186 drivers to using
      devm_platform_ioremap_resource() (Yangtao Li).
 
  - Update devfreq core:
 
    * Add 'name' sysfs attribute for devfreq devices (Chanwoo Choi).
 
    * Clean up the handing of transition statistics and allow them
      to be reset by writing 0 to the 'trans_stat' devfreq device
      attribute in sysfs (Kamil Konieczny).
 
    * Add 'devfreq_summary' to debugfs (Chanwoo Choi).
 
    * Clean up kerneldoc comments and Kconfig indentation (Krzysztof
      Kozlowski, Randy Dunlap).
 
  - Update devfreq drivers:
 
    * Add dynamic scaling for the imx8m DDR controller and clean up
      imx8m-ddrc (Leonard Crestez, YueHaibing).
 
    * Fix DT node reference counting and nitialization error code path
      in rk3399_dmc and add COMPILE_TEST and HAVE_ARM_SMCCC dependency
      for it (Chanwoo Choi, Yangtao Li).
 
    * Fix DT node reference counting in rockchip-dfi and make it use
      devm_platform_ioremap_resource() (Yangtao Li).
 
    * Fix excessive stack usage in exynos-ppmu (Arnd Bergmann).
 
    * Fix initialization error code paths in exynos-bus (Yangtao Li).
 
    * Clean up exynos-bus and exynos somewhat (Artur Świgoń, Krzysztof
      Kozlowski).
 
  - Add tracepoints for tracking usage_count updates unrelated to
    status changes in PM-runtime (Michał Mirosław).
 
  - Add sysfs attribute to control the "sync on suspend" behavior
    during system-wide suspend (Jonas Meurer).
 
  - Switch system-wide suspend tests over to 64-bit time (Alexandre
    Belloni).
 
  - Make wakeup sources statistics in debugfs cover deleted ones which
    used to be the case some time ago (zhuguangqing).
 
  - Clean up computations carried out during hibernation, update
    messages related to hibernation and fix a spelling mistake in one
    of them (Wen Yang, Luigi Semenzato, Colin Ian King).
 
  - Add mailmap entry for maintainer e-mail address that has not been
    functional for several years (Rafael Wysocki).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl4u2fESHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxvlkP/j5vDzyNUNJjnD6+897c8W+z5dwdiQfU
 QNtoopFXgw/fpOhGXRdj2mA4e6RtpU9aCCiHR6/qdh3/1qSnR5Y9R/51/gmdkwhY
 YakSxmgpgGrOJru94ApI1o/35eWwN/GxjajbfNY5ScrPQl/L0DF3iJWRsAOR5534
 p9e2gQqKecoE+MEn5JcGAXApA5xBLXuUmtWPUn5UGyhaz+jdmsf1zkDEOEvxREay
 hLGH1y6BY8HS/jytyNzISs9iDeBvg2fHmG8SskDiXVMke5sHBTU9MilgpnCFfQ0l
 OF/eNnTXTU7mAJhlnjBUt2rIe5peGSuhgg+Ur7s86xYqbj2SfsVM4UHjU0A6t9Jm
 sauWQh/Nbzw6XaCNzYKxP+dREAg0g/aq7xFqQi3bWx7YvzLk/hvNWi2+bv3adzx7
 Z3fvOki4xMXzLLrh0f1ipC8BKTsdioDZPAy06B80a0luv6ROdr6bPL7did14mWt2
 eCuPuZyXKhdV+PkjZHF+c4XT7N9NfGtE0WUQf54Q4VT00hDagGDliwXpm4ht1pjJ
 iO7uUJevXKSxMaV2xPZ+nWZaOeCVrMMTA1Ec1ELgC1n8WROZJ+SfhehgMQGp7BHS
 Hz4QO1HjTsCDnT+OU7JFeCRrkyXIlh75MOndWOOH6eTEXCAI9PihstB+UGXeNsK0
 BesNQz1sYY1O
 =g48u
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These add ACPI support to the intel_idle driver along with an admin
  guide document for it, add support for CPR (Core Power Reduction) to
  the AVS (Adaptive Voltage Scaling) subsystem, add new hardware support
  in a few places, add some new sysfs attributes, debugfs files and
  tracepoints, fix bugs and clean up a bunch of things all over.

  Specifics:

   - Update the ACPI processor driver in order to export
     acpi_processor_evaluate_cst() to the code outside of it, add ACPI
     support to the intel_idle driver based on that and clean up that
     driver somewhat (Rafael Wysocki).

   - Add an admin guide document for the intel_idle driver (Rafael
     Wysocki).

   - Clean up cpuidle core and drivers, enable compilation testing for
     some of them (Benjamin Gaignard, Krzysztof Kozlowski, Rafael
     Wysocki, Yangtao Li).

   - Fix reference counting of OPP (operating performance points) table
     structures (Viresh Kumar).

   - Add support for CPR (Core Power Reduction) to the AVS (Adaptive
     Voltage Scaling) subsystem (Niklas Cassel, Colin Ian King,
     YueHaibing).

   - Add support for TigerLake Mobile and JasperLake to the Intel RAPL
     power capping driver (Zhang Rui).

   - Update cpufreq drivers:
      - Add i.MX8MP support to imx-cpufreq-dt (Anson Huang).
      - Fix usage of a macro in loongson2_cpufreq (Alexandre Oliva).
      - Fix cpufreq policy reference counting issues in s3c and
        brcmstb-avs (chenqiwu).
      - Fix ACPI table reference counting issue and HiSilicon quirk
        handling in the CPPC driver (Hanjun Guo).
      - Clean up spelling mistake in intel_pstate (Harry Pan).
      - Convert the kirkwood and tegra186 drivers to using
        devm_platform_ioremap_resource() (Yangtao Li).

   - Update devfreq core:
      - Add 'name' sysfs attribute for devfreq devices (Chanwoo Choi).
      - Clean up the handing of transition statistics and allow them to
        be reset by writing 0 to the 'trans_stat' devfreq device
        attribute in sysfs (Kamil Konieczny).
      - Add 'devfreq_summary' to debugfs (Chanwoo Choi).
      - Clean up kerneldoc comments and Kconfig indentation (Krzysztof
        Kozlowski, Randy Dunlap).

   - Update devfreq drivers:
      - Add dynamic scaling for the imx8m DDR controller and clean up
        imx8m-ddrc (Leonard Crestez, YueHaibing).
      - Fix DT node reference counting and nitialization error code path
        in rk3399_dmc and add COMPILE_TEST and HAVE_ARM_SMCCC dependency
        for it (Chanwoo Choi, Yangtao Li).
      - Fix DT node reference counting in rockchip-dfi and make it use
        devm_platform_ioremap_resource() (Yangtao Li).
      - Fix excessive stack usage in exynos-ppmu (Arnd Bergmann).
      - Fix initialization error code paths in exynos-bus (Yangtao Li).
      - Clean up exynos-bus and exynos somewhat (Artur Świgoń, Krzysztof
        Kozlowski).

   - Add tracepoints for tracking usage_count updates unrelated to
     status changes in PM-runtime (Michał Mirosław).

   - Add sysfs attribute to control the "sync on suspend" behavior
     during system-wide suspend (Jonas Meurer).

   - Switch system-wide suspend tests over to 64-bit time (Alexandre
     Belloni).

   - Make wakeup sources statistics in debugfs cover deleted ones which
     used to be the case some time ago (zhuguangqing).

   - Clean up computations carried out during hibernation, update
     messages related to hibernation and fix a spelling mistake in one
     of them (Wen Yang, Luigi Semenzato, Colin Ian King).

   - Add mailmap entry for maintainer e-mail address that has not been
     functional for several years (Rafael Wysocki)"

* tag 'pm-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (83 commits)
  cpufreq: loongson2_cpufreq: adjust cpufreq uses of LOONGSON_CHIPCFG
  intel_idle: Clean up irtl_2_usec()
  intel_idle: Move 3 functions closer to their callers
  intel_idle: Annotate initialization code and data structures
  intel_idle: Move and clean up intel_idle_cpuidle_devices_uninit()
  intel_idle: Rearrange intel_idle_cpuidle_driver_init()
  intel_idle: Clean up NULL pointer check in intel_idle_init()
  intel_idle: Fold intel_idle_probe() into intel_idle_init()
  intel_idle: Eliminate __setup_broadcast_timer()
  cpuidle: fix cpuidle_find_deepest_state() kerneldoc warnings
  cpuidle: sysfs: fix warnings when compiling with W=1
  cpuidle: coupled: fix warnings when compiling with W=1
  cpufreq: brcmstb-avs: fix imbalance of cpufreq policy refcount
  PM: suspend: Add sysfs attribute to control the "sync on suspend" behavior
  PM / devfreq: Add debugfs support with devfreq_summary file
  Documentation: admin-guide: PM: Add intel_idle document
  cpuidle: arm: Enable compile testing for some of drivers
  PM-runtime: add tracepoints for usage_count changes
  cpufreq: intel_pstate: fix spelling mistake: "Whethet" -> "Whether"
  PM: hibernate: fix spelling mistake "shapshot" -> "snapshot"
  ...
 2020-01-27 11:23:54 -08:00
Linus Torvalds aae1464f46 regulator: Updates for v5.6 
Hardly anything going on in the core this time around with the regulator
 API and pretty quiet on the driver front:
 
  - An API for comparing regulators, useful for devices that need to
    check if supply voltages exactly match rather than just nominally
    match.
  - Conversion of several DT bindings to YAML format.
  - Conversion of I2C drivers to probe_new().
  - New drivers for Monolithic MPQ7920 and MP8859, and Rohm BD71828.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl4vH54THGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0J3sB/9vdpvQa2ei2jyEna4w0ynscV/6HFbF
 br6U3E7gDzeyNHCz11x8q8cJidD20t44ICitSJkVsjbiJenRbDmrwUpCccCTS/fH
 byhirQTr+j9+4I/F4U26dpUU3ApOdT2Lsgm3C/SSQHjXg9BuyfdQYXIZjGpPns5F
 hD/ujf4n+2rPACnWiZC37a781Uct42OHM+ewRCMNdi7pm8lZuEE5edZ+HE+ipT/e
 QE9ZTXuNvpKOT1LRenXGiv03y3SJHFqRynjWBI5PLTFTO3dg5gY+mEWusLoSufas
 F3fZtOw0Q1kI7R/SPteYDT5l/htnKJA2g2VHTgwvgObUFSdwM4Eq4efj
 =++OR
 -----END PGP SIGNATURE-----

Merge tag 'regulator-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "Hardly anything going on in the core this time around with the
  regulator API and pretty quiet on the driver front:

   - An API for comparing regulators, useful for devices that need to
     check if supply voltages exactly match rather than just nominally
     match.

   - Conversion of several DT bindings to YAML format.

   - Conversion of I2C drivers to probe_new().

   - New drivers for Monolithic MPQ7920 and MP8859, and Rohm BD71828"

* tag 'regulator-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (34 commits)
  dt-bindings: regulator: add document bindings for mpq7920
  regulator: core: Fix exported symbols to the exported GPL version
  regulator: mpq7920: Fix incorrect defines
  regulator: vqmmc-ipq4019: Fix platform_no_drv_owner.cocci warnings
  regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage
  regulator fix for "regulator: core: Add regulator_is_equal() helper"
  regulator: core: Add regulator_is_equal() helper
  regulator: mpq7920: Convert to use .probe_new
  regulator: mpq7920: Remove unneeded fields from struct mpq7920_regulator_info
  regulator: vqmmc-ipq4019: Trivial clean up
  regulator: vqmmc-ipq4019: Remove ipq4019_regulator_remove
  regulator: bindings: Drop document bindings for mpq7920
  dt-bindings: Drop entry for Monolithic Power System, MPS
  regulator: bd718x7: Simplify the code by removing struct bd718xx_pmic_inits
  regulator: add IPQ4019 SDHCI VQMMC LDO driver
  regulator: Convert i2c drivers to use .probe_new
  regulator: mpq7920: Check the correct variable in mpq7920_regulator_register()
  regulator: mpq7920: Fix Woverflow warning on conversion
  regulator: mp8859: tidy up white space in probe
  regulator: mpq7920: add mpq7920 regulator driver
  ...
 2020-01-27 11:18:55 -08:00
Linus Torvalds 1e1ab4ba47 spi: Updates for v5.6 
Not much going on in the core for SPI this time but a reasonable amount
 of change in the drivers:
 
  - Removal of dmal_request_slave_channel() from Peter Ujfalusi.
  - More conversions of drivers to GPIO descriptors from Linus Walleij.
  - A big rework of the sh-msiof driver from Geert Uytterhoeven moving it
    over to the generic native chipselect support.
  - DMA support for the uniphier driver from Kunihiko Hayashi.
  - New driver support for HiSilcon v3xx SPI NOR controllers from John
    Garry.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl4vF48THGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0F9iB/9UPRQgtoC3ezq7eW/1zYWMhoEYoGqX
 DwqMwucUMdxh/xnxCu6TTZKUPJ0lceZJ/MZNAh5aHd/iWQKRYs8hJEyoDIGAchs8
 dGJE5DTo+M/PJKtC99s/9mrIKObexHY9QPkIc8tTVWWNBLoZs0JdfHh1XySHEyNv
 /tXbVetuSTMfvm15mPWzeM+lBpvsII9FA70vQKXPYLTnGoNSc3Xx90GDFsNEMXQO
 CN1+FOSXZepKqhAw+YcKdzOM7yOx5xksvQNIbzLYXnIygXRjqf5sGR6ZJhAGoAGB
 BhqRihNERn2KlWR733QVe7uDTwGIkQuVJC5mqNRZkYEbOHHKS2jX9F9L
 =Hlbb
 -----END PGP SIGNATURE-----

Merge tag 'spi-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "Not much going on in the core for SPI this time but a reasonable
  amount of change in the drivers:

   - Removal of dmal_request_slave_channel() from Peter Ujfalusi.

   - More conversions of drivers to GPIO descriptors from Linus Walleij.

   - A big rework of the sh-msiof driver from Geert Uytterhoeven moving
     it over to the generic native chipselect support.

   - DMA support for the uniphier driver from Kunihiko Hayashi.

   - New driver support for HiSilcon v3xx SPI NOR controllers from John
     Garry"

* tag 'spi-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (52 commits)
  dt-binding: spi: add NPCM PSPI reset binding
  spi: pxa2xx: Avoid touching SSCR0_SSE on MMP2
  spi: spi-fsl-qspi: Ensure width is respected in spi-mem operations
  spi: npcm-pspi: modify reset support
  spi: npcm-pspi: improve spi transfer performance
  spi: spi-ti-qspi: fix warning
  spi: npcm-pspi: fix 16 bit send and receive support
  spi: pxa2xx: Add support for Intel Comet Lake PCH-V
  spi: fsl: simplify error path in of_fsl_spi_probe()
  spi: fsl-lpspi: fix only one cs-gpio working
  spi: spi-ti-qspi: optimize byte-transfers
  spi: spi-ti-qspi: support large flash devices
  spi: spi-qcom-qspi: Use device managed memory for clk_bulk_data
  MAINTAINERS: Add a maintainer for the HiSilicon v3xx SFC driver
  spi: Add HiSilicon v3xx SPI NOR flash controller driver
  dt-bindings: spi_atmel: add microchip,sam9x60-spi
  spi: bcm2835: Raise maximum number of slaves to 4
  spi: sh-msiof: Do not redefine STR while compile testing
  spi: rspi: Add support for GPIO chip selects
  spi: rspi: Add support for multiple native chip selects
  ...
 2020-01-27 11:15:34 -08:00
Linus Torvalds a5b871c91d dmaengine updates for v5.6-rc1 
- Core:
    - Support for dynamic channels
    - Removal of various slave wrappers
    - Make few slave request APIs as private to dmaengine
    - Symlinks between channels and slaves
    - Support for hotplug of controllers
    - Support for metadata_ops for dma_async_tx_descriptor
    - Reporting DMA cached data amount
    - Virtual dma channel locking updates
 
  - New drivers/device/feature support support:
    - Driver for Intel data accelerators
    - Driver for TI K3 UDMA
    - Driver for PLX DMA engine
    - Driver for hisilicon Kunpeng DMA engine
    - Support for eDMA support for QorIQ LS1028A in fsl edma driver
    - Support for cyclic dma in sun4i driver
    - Support for X1830 in JZ4780 driver
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAl4u+QkACgkQfBQHDyUj
 g0cCcg//awBruofTHIrBOwHmCX1a09mw5WmkFG48N7tYp4fvaI1aOgs3hH9PZiBG
 fFZUktodwYpEKg6JJOfm1RnLBuKm0+3zmaKGPdK1RcbaDURh8G9qhW65f4mfImvB
 GXlgw59WKtgPAM9zWW9UxjugAk4DBte5xVKYJUsI0t4P7k9TM4i0Fv0VmMUhhDuo
 buPD1cM/GWFHbE7OYJ51aGRtrOHV1nPgQaHBkWaT7EotzGsZ3gtWYzteI3BRXRV/
 IkSgxOefMkIgu1j3KIxFZ1CJDHCZSnx2B+AEMCcp63osyeHBOYoL7KQxo6tBjaRV
 fbCasbkTkvvJUjyZdtOdU2wqf7ZqoDkD+n5nkpENf4G1M8J5RiHmrFq96m3HRonE
 V1bmMslXhsJlvtoT6ec2iJFchiq0nx1XHyST6faUOK+0cd1lzbogWwztydQH4fwd
 TxfEd+eYlFFu3lGDfRp14Tz7fAcFNPZ2bJQhZkF6RpwUW3y3L0cJc3Y0AcWmNkvJ
 oStvTlbbUvgRgO7rvEyAmdPb31lE6PLaA0WCahcvf4zQxxNMyYyaWP73MegvqJGO
 pfJXBOWBTTKwu0fDR5UHJd3tEDABvcZnwBaCSYrpI5f9bJ4NRI3f4DIMwLBnw9IK
 aH6pzwo4gTAMuvxzq8KeTp3hU7kszyUN8q8hiTZlgVozMLKXhQY=
 =mv1v
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:
 "This time we have a bunch of core changes to support dynamic channels,
  hotplug of controllers, new apis for metadata ops etc along with new
  drivers for Intel data accelerators, TI K3 UDMA, PLX DMA engine and
  hisilicon Kunpeng DMA engine. Also usual assorted updates to drivers.

  Core:
   - Support for dynamic channels
   - Removal of various slave wrappers
   - Make few slave request APIs as private to dmaengine
   - Symlinks between channels and slaves
   - Support for hotplug of controllers
   - Support for metadata_ops for dma_async_tx_descriptor
   - Reporting DMA cached data amount
   - Virtual dma channel locking updates

  New drivers/device/feature support support:
   - Driver for Intel data accelerators
   - Driver for TI K3 UDMA
   - Driver for PLX DMA engine
   - Driver for hisilicon Kunpeng DMA engine
   - Support for eDMA support for QorIQ LS1028A in fsl edma driver
   - Support for cyclic dma in sun4i driver
   - Support for X1830 in JZ4780 driver"

* tag 'dmaengine-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (62 commits)
  dmaengine: Create symlinks between DMA channels and slaves
  dmaengine: hisilicon: Add Kunpeng DMA engine support
  dmaengine: idxd: add char driver to expose submission portal to userland
  dmaengine: idxd: connect idxd to dmaengine subsystem
  dmaengine: idxd: add descriptor manipulation routines
  dmaengine: idxd: add sysfs ABI for idxd driver
  dmaengine: idxd: add configuration component of driver
  dmaengine: idxd: Init and probe for Intel data accelerators
  dmaengine: add support to dynamic register/unregister of channels
  dmaengine: break out channel registration
  x86/asm: add iosubmit_cmds512() based on MOVDIR64B CPU instruction
  dmaengine: ti: k3-udma: fix spelling mistake "limted" -> "limited"
  dmaengine: s3c24xx-dma: fix spelling mistake "to" -> "too"
  dmaengine: Move dma_get_{,any_}slave_channel() to private dmaengine.h
  dmaengine: Remove dma_request_slave_channel_compat() wrapper
  dmaengine: Remove dma_device_satisfies_mask() wrapper
  dt-bindings: fsl-imx-sdma: Add i.MX8MM/i.MX8MN/i.MX8MP compatible string
  dmaengine: zynqmp_dma: fix burst length configuration
  dmaengine: sun4i: Add support for cyclic requests with dedicated DMA
  dmaengine: fsl-qdma: fix duplicated argument to &&
  ...
 2020-01-27 10:55:50 -08:00
Linus Torvalds 08c49dc135 platform-drivers-x86 for v5.6-1 
* Enable thermal policy for ASUS TUF FX705DY/FX505DY
 * Support left round button on ASUS N56VB
 * Support new Mellanox platforms of basic class VMOD0009 and VMOD0010
 * Intel Comet Lake, Tiger Lake and Elkhart Lake support in the PMC driver
 * Big clean up to Intel PMC core, PMC IPC and SCU IPC drivers
 * Touchscreen support for the PiPO W11 tablet
 
 The following is an automated git shortlog grouped by driver:
 
 asus-nb-wmi:
  -  Support left round button on N56VB
 
 asus-wmi:
  -  Fix keyboard brightness cannot be set to 0
  -  Set throttle thermal policy to default
  -  Support throttle thermal policy
 
 Documentation/ABI:
  -  Add new attribute for mlxreg-io sysfs interfaces
  -  Style changes
  -  Add missed attribute for mlxreg-io sysfs interfaces
  -  Fix documentation inconsistency for mlxreg-io sysfs interfaces
 
 GPD pocket fan:
  -  Allow somewhat lower/higher temperature limits
  -  Use default values when wrong modparams are given
 
 intel_atomisp2_pm:
  -  Spelling fixes
  -  Refactor timeout loop
 
 intel_mid_powerbtn:
  -  Take a copy of ddata
 
 intel_pmc_core:
  -  update Comet Lake platform driver
  -  Fix spelling of MHz unit
  -  Fix indentation in function definitions
  -  Put more stuff under #ifdef DEBUG_FS
  -  Respect error code of kstrtou32_from_user()
  -  Add Intel Elkhart Lake support
  -  Add Intel Tiger Lake support
  -  Make debugfs entry for pch_ip_power_gating_status conditional
  -  Create platform dependent bitmap structs
  -  Remove unnecessary assignments
  -  Clean up: Remove comma after the termination line
 
 intel_pmc_ipc:
  -  Switch to use driver->dev_groups
  -  Propagate error from kstrtoul()
  -  Use octal permissions in sysfs attributes
  -  Get rid of unnecessary includes
  -  Drop ipc_data_readb()
  -  Drop intel_pmc_gcr_read() and intel_pmc_gcr_write()
  -  Make intel_pmc_ipc_raw_cmd() static
  -  Make intel_pmc_ipc_simple_command() static
  -  Make intel_pmc_gcr_update() static
 
 intel_scu_ipc:
  -  Reformat kernel-doc comments of exported functions
  -  Drop intel_scu_ipc_raw_command()
  -  Drop intel_scu_ipc_io[read|write][8|16]()
  -  Drop unused macros
  -  Drop unused prototype intel_scu_ipc_fw_update()
  -  Sleeping is fine when polling
  -  Drop intel_scu_ipc_i2c_cntrl()
  -  Remove Lincroft support
  -  Add constants for register offsets
  -  Fix interrupt support
 
 intel_scu_ipcutil:
  -  Remove default y from Kconfig
 
 intel_telemetry_debugfs:
  -  Respect error code of kstrtou32_from_user()
 
 intel_telemetry_pltdrv:
  -  use devm_platform_ioremap_resource()
 
 mlx-platform:
  -  Add support for next generation systems
  -  Add support for new capability register
  -  Add support for new system type
  -  Set system mux configuration based on system type
  -  Add more definitions for system attributes
  -  Cosmetic changes
 
 platform/mellanox:
  -  mlxreg-hotplug: Add support for new capability register
  -  fix potential deadlock in the tmfifo driver
 
 tools/power/x86/intel-speed-select:
  -  Update version
  -  Change the order for clos disable
  -  Fix result display for turbo-freq auto mode
  -  Add support for core-power discovery
  -  Allow additional core-power mailbox commands
  -  Update MAINTAINERS for the intel uncore frequency control
  -  Add support for Uncore frequency control
 
 touchscreen_dmi:
  -  Fix indentation in several places
  -  Add info for the PiPO W11 tablet
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEqaflIX74DDDzMJJtb7wzTHR8rCgFAl4uxRcACgkQb7wzTHR8
 rCjV3xAArz8e4FmFRe77LF83BHduBYkMjnobDFqWa+BhUicapezU4121K/k1cSBi
 MRhYOK3+lZvMqFTbjFatgkCapjma34+6xMJztrT/drCgmxHzsLQgJsmJ3pXWqnYM
 t4CcPOjvjmZbNJT0NdKjeNyCwFGG6Lupf82fVfIXIshtaKE3xw51242+PJEI978i
 2VL3Ck0NL1stgUkKf/ppHkqsjLb0s6IBtgWv052s/0SlHT7RlFAonsCBxIktVa5L
 divCtnWJKRhbalCPnKOJ1Q6/kpR/BSNq6OddcgaACKH9i0d5KwtdNDdQ66FkEidN
 4rKK3gYMLRpgpLjApH91n7jWMQUaJawVN/3WuRfdnwQOcJ/PVY5vosv2yHKMy3yB
 mFLG0G2v3cXEmvRNEyeKBpSkOrAnsoylFt8zLN6/OP3cQ/jdrnq+UpurxRnBEGkm
 ZDbs5FYqjAPMyjL+/ldhndIdIqvusVgrl2V93BuAzN080UvkQ2FKjLnk0Dkc/xmZ
 XbXUAn+BCUpmABstLa7NJGruV3O9IdiSLHW5Cr0NZC74h4nHqDS57At7LkQbphkC
 Pt/+7tirpaEvSbgQZsVI0WfOwDjJf79FT4dYtCY1GkmSvmvF+OUgKicfEZsfuDan
 hLez0resoJkHLeJtcrF1lW3l3kyMaokBmkUhB1skOYlLUvcsOwg=
 =rMop
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v5.6-1' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver updates from Andy Shevchenko:

 - Enable thermal policy for ASUS TUF FX705DY/FX505DY

 - Support left round button on ASUS N56VB

 - Support new Mellanox platforms of basic class VMOD0009 and VMOD0010

 - Intel Comet Lake, Tiger Lake and Elkhart Lake support in the PMC
   driver

 - Big clean-up to Intel PMC core, PMC IPC and SCU IPC drivers

 - Touchscreen support for the PiPO W11 tablet

* tag 'platform-drivers-x86-v5.6-1' of git://git.infradead.org/linux-platform-drivers-x86: (64 commits)
  platform/x86: intel_pmc_ipc: Switch to use driver->dev_groups
  platform/x86: intel_pmc_ipc: Propagate error from kstrtoul()
  platform/x86: intel_pmc_ipc: Use octal permissions in sysfs attributes
  platform/x86: intel_pmc_ipc: Get rid of unnecessary includes
  platform/x86: intel_pmc_ipc: Drop ipc_data_readb()
  platform/x86: intel_pmc_ipc: Drop intel_pmc_gcr_read() and intel_pmc_gcr_write()
  platform/x86: intel_pmc_ipc: Make intel_pmc_ipc_raw_cmd() static
  platform/x86: intel_pmc_ipc: Make intel_pmc_ipc_simple_command() static
  platform/x86: intel_pmc_ipc: Make intel_pmc_gcr_update() static
  platform/x86: intel_scu_ipc: Reformat kernel-doc comments of exported functions
  platform/x86: intel_scu_ipc: Drop intel_scu_ipc_raw_command()
  platform/x86: intel_scu_ipc: Drop intel_scu_ipc_io[read|write][8|16]()
  platform/x86: intel_scu_ipc: Drop unused macros
  platform/x86: intel_scu_ipc: Drop unused prototype intel_scu_ipc_fw_update()
  platform/x86: intel_scu_ipc: Sleeping is fine when polling
  platform/x86: intel_scu_ipc: Drop intel_scu_ipc_i2c_cntrl()
  platform/x86: intel_scu_ipc: Remove Lincroft support
  platform/x86: intel_scu_ipc: Add constants for register offsets
  platform/x86: intel_scu_ipc: Fix interrupt support
  platform/x86: intel_scu_ipcutil: Remove default y from Kconfig
  ...
 2020-01-27 10:42:35 -08:00
Linus Torvalds 9e1af7567b MMC core: 
- Convert to reasonable timeouts for all CMD6 commands (updates for BKOPS,
    CACHE_FLUSH and INAND_CMD38_ARG_EXT_CSD) for eMMC
  - Respect f_max clock rate at card initialization
  - Add gpiod_toggle_active_low() API
  - Consolidate slot-gpio code by using gpiod_toggle_active_low()
 
 MMC host:
  - Add pinctrl_select_default_state() API
  - Consolidate pintctrl code by using pinctrl_select_default_state()
  - mmci: Support any block sizes for SDIO for some variants
  - mmci: Enable reset control for stm32_sdmmc
  - mmc_spi: Toggle SPI_CS_HIGH polarity rather than hard-coding it
  - renesas_sdhi: Add support for the r8a77961 variant
  - renesas_sdhi: A few minor improvements
  - rockchip-dw-mshc: Add support for the rk3308 variant
  - sdhci: Enable support for external DMA controllers
  - sdhci: Fixup error path when sending CMD12
  - sdhci-brcmstb: Add support for 7216b0 variant
  - sdhci-brcmstb: Add support for command queuing (CQHCI)
  - sdhci-brcmstb: Add support for eMMC HS400ES mode
  - sdhci-msm: Add support for the sc7180 variant
  - sdhci-msm: Add support for command queuing (CQHCI)
  - sdhci-of-at91: Add support for the SAM9x60 variant
  - sdhci-of-at91: Improve support for tunings
  - sdhci-of-esdhc: A few fixups for some clock related issues
  - sdhci-omap: Add support for the am335x and the am437x variants
  - sdhci-omap: Improve support for erase operations
  - sdhci-omap: Add support for external DMA
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAl4uww8XHHVsZi5oYW5z
 c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjClg8w/+Iv7Emp5oBmj0aY9BA2rWpOVj
 rNPynDbRPI0qrrQPqXrZ/UdGDc6lgWHoeHdtv70u8WK8UEgi/OYw7PlE3eij9DGB
 VcOnMyDg+Q6+Hq3vjvADWZzNrHGjdvjcGLxx386DHpTCsc1zD3EL2AG5e6i2/dfH
 /FiSdfxVtRKw4GEn5jIDhHh63Av8mMCaPPfLw0DKxMQIuJ3atMvplgsr1KXIAydo
 QTjKWxDJDJnKddtdHcnjP9Tck+ksrATDHHHQ9qGVFuOr3Yy9TgvOMlLo8vxJ364l
 3bIwYfbaeE4/NKvqJGDzIF1jr4R5JoHZhvHLGqr+hUwMzxnwcbyCUSghk87oOqMt
 FKAfKqwdEvVyq8QnmV9ArPXRnVmW4ElJN3edTeC00/7MoxWIx2TRHvEO5HejqPkq
 +kw0NEIqWWiztV3/aa5zFJtlp8QphwsopvLzwEAJB+1G0tiSiNcfokrJ0AyODC5/
 K4kXTGfQh28RSIr6ait7FNphyOug1WAvXqvt3ydY1lQPH0G36DMzLMx06mjgTA4O
 DNYXzLoLPzRaPU4NvpHu3/axgRLYCN3CbGdx3U8GT9wgmerRyY/jW9ldSF7w6Wim
 W0Zx1j3SdvmgafMXVsFcxMUC0IvfOFiMzXJ6DOus37xTYLRKW40wttg9SSxtm+9E
 3IfRRlXnlkHVvTZ1ewI=
 =L0cJ
 -----END PGP SIGNATURE-----

Merge tag 'mmc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "There are no updates for the MEMSTICK subsystem this time. But note
  that I am also carrying a patch from the pinctrl tree, which has been
  shared through an immutable branch.

  Summary:

  MMC core:
   - Convert to reasonable timeouts for all CMD6 commands (updates for
     BKOPS, CACHE_FLUSH and INAND_CMD38_ARG_EXT_CSD) for eMMC
   - Respect f_max clock rate at card initialization
   - Add gpiod_toggle_active_low() API
   - Consolidate slot-gpio code by using gpiod_toggle_active_low()

  MMC host:
   - Add pinctrl_select_default_state() API
   - Consolidate pintctrl code by using pinctrl_select_default_state()
   - mmci: Support any block sizes for SDIO for some variants
   - mmci: Enable reset control for stm32_sdmmc
   - mmc_spi: Toggle SPI_CS_HIGH polarity rather than hard-coding it
   - renesas_sdhi: Add support for the r8a77961 variant
   - renesas_sdhi: A few minor improvements
   - rockchip-dw-mshc: Add support for the rk3308 variant
   - sdhci: Enable support for external DMA controllers
   - sdhci: Fixup error path when sending CMD12
   - sdhci-brcmstb: Add support for 7216b0 variant
   - sdhci-brcmstb: Add support for command queuing (CQHCI)
   - sdhci-brcmstb: Add support for eMMC HS400ES mode
   - sdhci-msm: Add support for the sc7180 variant
   - sdhci-msm: Add support for command queuing (CQHCI)
   - sdhci-of-at91: Add support for the SAM9x60 variant
   - sdhci-of-at91: Improve support for tunings
   - sdhci-of-esdhc: A few fixups for some clock related issues
   - sdhci-omap: Add support for the am335x and the am437x variants
   - sdhci-omap: Improve support for erase operations
   - sdhci-omap: Add support for external DMA"

* tag 'mmc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (89 commits)
  mmc: core: Default to generic_cmd6_time as timeout in __mmc_switch()
  mmc: block: Use generic_cmd6_time when modifying INAND_CMD38_ARG_EXT_CSD
  mmc: core: Specify timeouts for BKOPS and CACHE_FLUSH for eMMC
  mmc: sdhci-cadence: remove unneeded 'inline' marker
  dt-bindings: mmc: rockchip-dw-mshc: add description for rk3308
  dt-bindings: mmc: convert rockchip dw-mshc bindings to yaml
  dt-bindings: mmc: convert synopsys dw-mshc bindings to yaml
  mmc: sdhci-msm: Add CQHCI support for sdhci-msm
  mmc: sdhci: Let a vendor driver supply and update ADMA descriptor size
  mmc: sdhci-of-esdhc: fix serious issue clock is always disabled
  mmc: sdhci-of-esdhc: fix transfer mode register reading
  mmc: sdhci-brcmstb: Fix incorrect switch to HS mode
  mmc: sdhci-brcmstb: Add support for Command Queuing (CQE)
  mmc: sdhci-brcmstb: Add shutdown callback
  mmc: sdhci-brcmstb: Fix driver to defer on clk_get defer
  mmc: sdhci-brcmstb: Add ability to use HS400ES transfer mode
  dt-bindings: mmc: brcm,sdhci-brcmstb: Add support for 7216b0
  mmc: core: limit probe clock frequency to configured f_max
  mmc: sdhci-milbeaut: Remove redundant platform_get_irq error message
  mmc: sdhci: fix an issue of mixing different types
  ...
 2020-01-27 10:30:42 -08:00
Linus Torvalds b9b627a449 * Core changes: 
- Make i3c_bus_set_mode() static
 
 * Driver changes:
   - Add a per-SoC data_hold_delay property to the Cadence driver
   - Fix formatting issues in the 'CADENCE I3C MASTER IP' MAINTAINERS entry
   - Use devm_platform_ioremap_resource() where appropriate
   - Adjust DesignWare reattach logic
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEKmCqpbOU668PNA69Ze02AX4ItwAFAl4un/cACgkQZe02AX4I
 twAdDRAApE2zF/mFpKWsEeRMslBUIu5Ke1sPC/gWqQ0NcisW1jVvbFQxoXBLJ3f2
 z41cqEtwKVGXGZGWRvMeHZhlllZ+c9gO+fnCN4CLfjr03ECZ/JUpBmgpjjfFKKu9
 Y3DzXBWX73KFZbZWUDE+JsufhdJCIjr7ozk5PXniZ9nAfrFxG50pZYHtZeF3KoCl
 GLSA+emCRfQA08Kks7JGB1zPsC7gNluK2DkdU/cIRIBE8LL2VZTHpKBUPcAZOryA
 ju/0U3DGyMxrnjPoa134/EaUBpXhAuMLOxgS9nf+Jd8I1AMm4BeG5Bw2g30Bp50D
 BTq3FNZX2Ihb+tEeZQaVFRazTHyMXwVCg9v26NXI89BIpDPFI7dsFd2C3lO/DtCM
 kEUpk0oplxTYV6ryOgDaBpE9CsS6mxayaxVnKvB7dXobU6/F4Qu23n1BrjlxYrmK
 wuIwcGMLzvlbBjm6EVPvFlJXGmDB5ndwMVVdqEEyFVzAB5xonN4gKXsQb7vcOQTn
 fh7/zvN/isr6g9BwyDl5qmq94ibTBu7ruhgkl1xiSsTHYHp2UipeiOY6ixveJt4U
 9WPBZeDVpcz+k+5Y4BPSRnXAIA3N/GM1BwS9Ku1oE1FeoavG8ziLHkcTL7MHeGKp
 RUfvxA4k8PioHERX1aZIg88MYqRBp4PTVh/g4HPw4gTfBOvGnX8=
 =LbKo
 -----END PGP SIGNATURE-----

Merge tag 'i3c/for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux

Pull i3c updates from Boris Brezillon:
 "Core changes:

   - Make i3c_bus_set_mode() static

  Driver changes:

   - Add a per-SoC data_hold_delay property to the Cadence driver

   - Fix formatting issues in the 'CADENCE I3C MASTER IP' MAINTAINERS
     entry

   - Use devm_platform_ioremap_resource() where appropriate

   - Adjust DesignWare reattach logic"

* tag 'i3c/for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: master: dw: reattach device on first available location of address table
  i3c: master: cdns: convert to devm_platform_ioremap_resource
  i3c: master: dw: convert to devm_platform_ioremap_resource
  MAINTAINERS: fix style in CADENCE I3C MASTER IP entry
  i3c: master: make i3c_bus_set_mode static
  i3c: master: cdns: add data hold delay support
 2020-01-27 10:28:43 -08:00
Linus Torvalds 35417d57ef hwmon updates for v5.6 
core:
 - Add support for enable attributes to hwmon core
 - Add intrusion templates
 
 pmbus:
 - Support for Infineon Multi-phase xdpe122 family controllers
 - Support for Intel IMVP9 and AMD 6.25mV modes
 - Support for vid mode detection per page bases
 - Detect if chip is write protected
 - Support for MAX20730, MAX20734, MAX20743, MAX20796, UCD90320, TPS53688
 - Various improvements to ibm-cffps driver
 
 k10temp:
 - Support for additional temperature sensors as well as voltage and
   current telemetry for Zen CPUs
 
 w83627ehf:
 - Remove support for NCT6775, NCT6776 (they have their own driver)
 
 New drivers:
 - ADM1177
 - MAX31730
 - Driver for disk and solid state drives with temperature sensors
 
 Other:
 - pwm-fan: stop fan on shutdown
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiHPvMQj9QTOCiqgVyx8mb86fmYEFAl4s++oACgkQyx8mb86f
 mYFzzhAAjh2FQ2T6TPe+C+JA68ysLGsMCtlfGFWK3GS/pF0CUvr+/nA2FPwQ6ydX
 Sj+RzjS/CjgrAhabmUvpmRxJZUFFfu96LXCn6p4eaOnIqNMz2UIb+4xIZYMqn+CD
 kJH3dse7EOlWDk+gHyvkwFtOaye9xV/L9F4C7cKWwKdFYhQad3xA0eARHpNVCaA5
 BG33q+PVDx1gc/8C4JwLfqiF/IXExt9RV7akhoHMYHyJEpF4lD8X+/oTPjc/jbo7
 EfpIY6/0zBt3+TVMXRd7Kg1IcTDt8iePd7tVOFrL8ZIel+Elv/Fy7HyXm9dFC6zM
 r3b008XfVWSrk10ezOc7YOYKCv0mODuDzute8rzEA+LJSNIMRSorFzo3BezFex1L
 GZTZfThpeZXZ2pwu0BMkO8teYP1JpVaxgsE/PDKkgcpfGCloISoNft8DkPIdhB9K
 lf3iuPT+kX5h6/AMb6XD4PlA1bXb9Uj4FCS9KonbTKqEjwu6N2lE9kCA3Q7nvyaE
 PbEl/AF3DRGZXMAv/C6yJomsmOlUodolZEOa4tGXsTh1clSvgHOEllGtCLLTPkYS
 FOYmoReA54oz562e6WdhUtaMaS/O7pZRK9rwufng6qq+81VM1Ta5HcOSoK0kZrW4
 fs93B0TfmdP7szMr3HaFH1Xlh6eYGj/dYUabNuAfCKAKMTBdgmI=
 =rfbE
 -----END PGP SIGNATURE-----

Merge tag 'hwmon-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "core:
   - Add support for enable attributes to hwmon core
   - Add intrusion templates

  pmbus:
   - Support for Infineon Multi-phase xdpe122 family controllers
   - Support for Intel IMVP9 and AMD 6.25mV modes
   - Support for vid mode detection per page bases
   - Detect if chip is write protected
   - Support for MAX20730, MAX20734, MAX20743, MAX20796, UCD90320,
     TPS53688
   - Various improvements to ibm-cffps driver

  k10temp:
   - Support for additional temperature sensors as well as voltage and
     current telemetry for Zen CPUs

  w83627ehf:
   - Remove support for NCT6775, NCT6776 (they have their own driver)

  New drivers:
   - ADM1177
   - MAX31730
   - Driver for disk and solid state drives with temperature sensors

  Other:
   - pwm-fan: stop fan on shutdown"

* tag 'hwmon-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (35 commits)
  hwmon: (k10temp) Display up to eight sets of CCD temperatures
  hwmon: (k10temp) Add debugfs support
  hwmon: (k10temp) Don't show temperature limits on Ryzen (Zen) CPUs
  hwmon: (k10temp) Show core and SoC current and voltages on Ryzen CPUs
  hwmon: (k10temp) Report temperatures per CPU die
  hmon: (k10temp) Convert to use devm_hwmon_device_register_with_info
  hwmon: (k10temp) Use bitops
  hwmon: (pwm-fan) stop fan on shutdown
  MAINTAINERS: add entry for ADM1177 driver
  dt-binding: hwmon: Add documentation for ADM1177
  hwmon: (adm1177) Add ADM1177 Hot Swap Controller and Digital Power Monitor driver
  docs: hwmon: Include 'xdpe12284.rst' into docs
  hwmon: (pmbus) Add support for Infineon Multi-phase xdpe122 family controllers
  hwmon: (pmbus/tps53679) Extend device list supported by driver
  hwmon: (pmbus/core) Add support for Intel IMVP9 and AMD 6.25mV modes
  hwmon: (pmbus/core) Add support for vid mode detection per page bases
  hwmon: (pmbus/ibm-cffps) Prevent writing on_off_config with bad data
  hwmon: (w83627ehf) Remove set but not used variable 'fan4min'
  hwmon: Driver for disk and solid state drives with temperature sensors
  hwmon: (pmbus/ibm-cffps) Fix the LED behavior when turned off
  ...
 2020-01-27 09:14:11 -08:00
Sunil Goutham 688b3e829d MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver 
Added maintainers entry for Marvell OcteonTX2 SOC's physical
function NIC driver.

Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2020-01-27 14:33:40 +01:00
Sunil Goutham 493aeb26e1 Documentation: net: octeontx2: Add RVU HW and drivers overview 
Added high level overview of OcteonTx2 RVU HW and functionality of
various drivers which will be upstreamed.

Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2020-01-27 14:33:40 +01:00
Rafael J. Wysocki c95d9c140c Merge branches 'pm-core', 'powercap', 'pm-opp', 'pm-avs' and 'pm-misc' 
* pm-core:
  PM-runtime: add tracepoints for usage_count changes

* powercap:
  powercap/intel_rapl: add support for JasperLake
  x86/cpu: Add Jasper Lake to Intel family
  powercap/intel_rapl: add support for TigerLake Mobile

* pm-opp:
  opp: Replace list_kref with a local counter
  opp: Free static OPPs on errors while adding them

* pm-avs:
  power: avs: qcom-cpr: remove duplicated include from qcom-cpr.c
  power: avs: fix uninitialized error return on failed cpr_read_fuse_uV() call
  power: avs: qcom-cpr: make cpr_get_opp_hz_for_req() static
  power: avs: qcom-cpr: remove set but unused variable
  power: avs: qcom-cpr: make sure that regmap is available
  power: avs: qcom-cpr: fix unsigned expression compared with zero
  power: avs: qcom-cpr: fix invalid printk specifier in debug print
  power: avs: Add support for CPR (Core Power Reduction)
  dt-bindings: power: avs: Add support for CPR (Core Power Reduction)

* pm-misc:
  mailmap: Add entry for <rjw@sisk.pl>
 2020-01-27 11:30:13 +01:00
David S. Miller 82bc2e4a26 wireless-drivers-next patches for v5.6 
Second set of patches for v5.6. Nothing special standing out, smaller
 new features and fixes allover.
 
 Major changes:
 
 ar5523
 
 * add support for SMCWUSBT-G2 USB device
 
 iwlwifi
 
 * support new versions of the FTM FW APIs
 
 * support new version of the beacon template FW API
 
 * print some extra information when the driver is loaded
 
 rtw88
 
 * support wowlan feature for 8822c
 
 * add support for WIPHY_WOWLAN_NET_DETECT
 
 brcmfmac
 
 * add initial support for monitor mode
 
 qtnfmac
 
 * add module parameter to enable DFS offloading in firmware
 
 * add support for STA HE rates
 
 * add support for TWT responder and spatial reuse
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJeLcWsAAoJEG4XJFUm622bDGUIAJuhM4LiDAzOGnDjH5cMosOC
 /qwDpGD19cEeVAhNSMKUn7Uo9+qbQYIleiO7XXxzCuJceYbxbT5s3Vb/fWsRUPjS
 cBDmGuK8/giqMQJshXvfCTsoF83CyirCjY/MJvomK2BRlXM8hQ3s6hAcfU0zQ96e
 OU1akcfZzUwjaBKaDYLncxLuGbeUXMy8AZwFdgQlQRMoObpen/IIwx6jDK/A+3l6
 VCOJF+JTkDytfNWmTpZ65uJrYEXoLe6G4028FjOI4BDFmEgvdHC5vTm7VOBhrkuB
 9tsKcYNvECCNn2WI96V+etD8kaZPscQIW8hgOrYyGxw43lJg5zH4Z9eWAmHojxE=
 =UOhb
 -----END PGP SIGNATURE-----

Merge tag 'wireless-drivers-next-2020-01-26' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for v5.6

Second set of patches for v5.6. Nothing special standing out, smaller
new features and fixes allover.

Major changes:

ar5523

* add support for SMCWUSBT-G2 USB device

iwlwifi

* support new versions of the FTM FW APIs

* support new version of the beacon template FW API

* print some extra information when the driver is loaded

rtw88

* support wowlan feature for 8822c

* add support for WIPHY_WOWLAN_NET_DETECT

brcmfmac

* add initial support for monitor mode

qtnfmac

* add module parameter to enable DFS offloading in firmware

* add support for STA HE rates

* add support for TWT responder and spatial reuse
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
 2020-01-27 11:25:36 +01:00
Rafael J. Wysocki ff7a672f83 Merge branch 'acpica' 
* acpica:
  ACPICA: Update version to 20200110
  ACPICA: All acpica: Update copyrights to 2020 Including tool signons.
  ACPICA: Update the list of maintainers
  ACPICA: Update version to 20191213
  ACPICA: Dispatcher: always generate buffer objects for ASL create_field() operator
  ACPICA: acpisrc: add unix line ending support for non-windows build
  ACPICA: Disassembler: create buffer fields in ACPI_PARSE_LOAD_PASS1
  ACPICA: debugger: fix spelling mistake "adress" -> "address"
 2020-01-27 10:56:49 +01:00
Yangtao Li dccc5c3b6f thermal/drivers/sun8i: Add thermal driver for H6/H5/H3/A64/A83T/R40 
This patch adds the support for allwinner thermal sensor, within
allwinner SoC. It will register sensors for thermal framework
and use device tree to bind cooling device.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191219172823.1652600-2-anarsoul@gmail.com
 2020-01-27 10:24:32 +01:00
Daniel Lezcano 23affa2e29 thermal/drivers/cpu_cooling: Rename to cpufreq_cooling 
As we introduced the idle injection cooling device called
cpuidle_cooling, let's be consistent and rename the cpu_cooling to
cpufreq_cooling as this one mitigates with OPPs changes.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Link: https://lore.kernel.org/r/20191219225317.17158-3-daniel.lezcano@linaro.org
 2020-01-27 10:24:32 +01:00
Daniel Lezcano a4c428e523 thermal/drivers/cpu_cooling: Introduce the cpu idle cooling driver 
The cpu idle cooling device offers a new method to cool down a CPU by
injecting idle cycles at runtime.

It has some similarities with the intel power clamp driver but it is
actually designed to be more generic and relying on the idle injection
powercap framework.

The idle injection duration is fixed while the running duration is
variable. That allows to have control on the device reactivity for the
user experience.

An idle state powering down the CPU or the cluster will allow to drop
the static leakage, thus restoring the heat capacity of the SoC. It
can be set with a trip point between the hot and the critical points,
giving the opportunity to prevent a hard reset of the system when the
cpufreq cooling fails to cool down the CPU.

With more sophisticated boards having a per core sensor, the idle
cooling device allows to cool down a single core without throttling
the compute capacity of several cpus belonging to the same clock line,
so it could be used in collaboration with the cpufreq cooling device.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20191219225317.17158-2-daniel.lezcano@linaro.org
 2020-01-27 10:24:32 +01:00
Ganapathi Bhat d04bf42891 MAINTAINERS: update for mwifiex driver maintainers 
Remove Nishant Sarmukadam from Maintainer list, as he is no
longer working in NXP.

Signed-off-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
 2020-01-26 13:37:40 +02:00
David S. Miller 4d8773b68e Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 
Minor conflict in mlx5 because changes happened to code that has
moved meanwhile.

Signed-off-by: David S. Miller <davem@davemloft.net>
 2020-01-26 10:40:21 +01:00
Jon Maloy 61b1f2aff4 tipc: change maintainer email address 
Reflecting new realities.

Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2020-01-25 10:18:02 +01:00
Thomas Gleixner 43ee74487b irqchip updates for Linux 5.6: 
- Conversion of the SiFive PLIC to hierarchical domains
 - New SiFive GPIO irqchip driver
 - New Aspeed SCI irqchip driver
 - New NXP INTMUX irqchip driver
 - Additional support for the Meson A1 GPIO irqchip
 - First part of the GICv4.1 support
 - Assorted fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAl4rKn0PHG1hekBrZXJu
 ZWwub3JnAAoJECPQ0LrRPXpDHVoQALTTYQol+5Gz5pLxnROYEAdFjzrVrCarsK/b
 Cl4uVa5efOTCItSO3L9cEo1zoB++aJxPSOaKqX9hryPwPLTZzDiHYtVQ870tZB+k
 233cTvtT8+iw7/JPKnA8706TYDk1FUkJQ87V0gMLrnVH00dmJ8LvjW1bCdXV8iIa
 Ln78XIF+Ass+qJjSpCDRaOukDm6Qs+sZKAY0+nLXM8Ge564fdX7bPkDGN4tq9DLz
 74ZxY6s3rI5FoPceS270dtDf4Ib8gH+T8Bqd5AYSj/tcRE23s4muGb/O3Kez5Oko
 eEiuSadpep/kPQhgZlpX0tJgtEqHNfi6K8AIMscQQDFmJyuCqgR9/5as+UKX1V0M
 kPlOQtYCAVZmTnlOP6rA2V3RUFurVkFPkwUGzVYlCYxxrARvsH+vPxYqAPH/EEFq
 lGUo+2Z7Z+1ubPsnR8WKs8heC6qJidegGUtKoKYWroJl+tiuT6EtCP3J0QZPhdXT
 lVOBVnR6DHNIURuAEmag/eNYsBIj7PdmlByoMkBFn9LPE7Fn+OExJgbyVsu1IaTe
 AcUHmXR9QpcAKnDLmNSqFvhWsLo8CJ607rH3tL8vqnfijOHyt4AvKeE1R4QSavPx
 0F3FFNdo7Y1FAlJ9Ibw0gLvoIa6uP6FpdI3rht0iRaOZJlnDTbn+B8UayY0Ajvyp
 aGIjx7tY
 =8iz1
 -----END PGP SIGNATURE-----

Merge tag 'irqchip-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core

Pull irqchip updates from Marc Zyngier:

- Conversion of the SiFive PLIC to hierarchical domains
- New SiFive GPIO irqchip driver
- New Aspeed SCI irqchip driver
- New NXP INTMUX irqchip driver
- Additional support for the Meson A1 GPIO irqchip
- First part of the GICv4.1 support
- Assorted fixes
 2020-01-24 20:08:51 +01:00
Florian Westphal 048d19d444 mptcp: add basic kselftest for mptcp 
Add mptcp_connect tool:
xmit two files back and forth between two processes, several net
namespaces including some adding delays, losses and reordering.
Wrapper script tests that data was transmitted without corruption.

The "-c" command line option for mptcp_connect.sh is there for debugging:

The script will use tcpdump to create one .pcap file per test case, named
according to the namespaces, protocols, and connect address in use.
For example, the first test case writes the capture to
ns1-ns1-MPTCP-MPTCP-10.0.1.1.pcap.

The stderr output from tcpdump is printed after the test completes to
show tcpdump's "packets dropped by kernel" information.

Also check that userspace can't create MPTCP sockets when mptcp.enabled
sysctl is off.

The "-b" option allows to tune/lower send buffer size.
"-m mmap" can be used to test blocking io.  Default is non-blocking
io using read/write/poll.

Will run automatically on "make kselftest".

Note that the default timeout of 45 seconds is used even if there is a
"settings" changing it to 450. 45 seconds should be enough in most cases
but this depends on the machine running the tests.

A fix to correctly read the "settings" file has been proposed upstream
but not applied yet. It is not blocking the execution of these new tests
but it would be nice to have it:

  https://patchwork.kernel.org/patch/11204935/

Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2020-01-24 13:44:08 +01:00
Mat Martineau f870fa0b57 mptcp: Add MPTCP socket stubs 
Implements the infrastructure for MPTCP sockets.

MPTCP sockets open one in-kernel TCP socket per subflow. These subflow
sockets are only managed by the MPTCP socket that owns them and are not
visible from userspace. This commit allows a userspace program to open
an MPTCP socket with:

  sock = socket(AF_INET, SOCK_STREAM, IPPROTO_MPTCP);

The resulting socket is simply a wrapper around a single regular TCP
socket, without any of the MPTCP protocol implemented over the wire.

Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Co-developed-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2020-01-24 13:44:07 +01:00
Johan Jonker 1eece23dba dt-bindings: mmc: convert rockchip dw-mshc bindings to yaml 
Current dts files with 'dwmmc' nodes are manually verified.
In order to automate this process rockchip-dw-mshc.txt
has to be converted to yaml. In the new setup
rockchip-dw-mshc.yaml will inherit properties from
mmc-controller.yaml and synopsys-dw-mshc-common.yaml.
'dwmmc' will no longer be a valid name for a node and
should be changed to 'mmc'.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200116152230.29831-2-jbx6244@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
 2020-01-24 12:11:48 +01:00
Dave Jiang bfe1d56091 dmaengine: idxd: Init and probe for Intel data accelerators 
The idxd driver introduces the Intel Data Stream Accelerator [1] that will
be available on future Intel Xeon CPUs. One of the kernel access
point for the driver is through the dmaengine subsystem. It will initially
provide the DMA copy service to the kernel.

Some of the main functionality introduced with this accelerator
are: shared virtual memory (SVM) support, and descriptor submission using
Intel CPU instructions movdir64b and enqcmds. There will be additional
accelerator devices that share the same driver with variations to
capabilities.

This commit introduces the probe and initialization component of the
driver.

[1]: https://software.intel.com/en-us/download/intel-data-streaming-accelerator-preliminary-architecture-specification

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/157965023991.73301.6186843973135311580.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
 2020-01-24 11:18:45 +05:30
Beniamin Bia 05592bea7a MAINTAINERS: add entry for ADM1177 driver 
Add Beniamin Bia and Michael Hennerich as a maintainer for ADM1177 ADC.

Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Link: https://lore.kernel.org/r/20200114112159.25998-3-beniamin.bia@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2020-01-23 13:15:11 -08:00
Rob Herring e1ac611f57 dt-bindings: PCI: Convert generic host binding to DT schema 
Convert the generic PCI host binding to DT schema. The derivative Juno,
PLDA XpressRICH3-AXI, and Designware ECAM bindings all just vary in
their compatible strings. The simplest way to convert those to
schema is just add them into the common generic PCI host schema.

The HiSilicon ECAM and Cavium ThunderX PEM bindings have an additional
'reg' entry, but are otherwise the same binding as well.

Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Andrew Murray <andrew.murray@arm.com>
Cc: Zhou Wang <wangzhou1@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: David Daney <david.daney@cavium.com>
Signed-off-by: Rob Herring <robh@kernel.org>
 2020-01-23 15:04:07 -06:00
Rob Herring 919ba6e739 dt-bindings: PCI: Convert Arm Versatile binding to DT schema 
Convert the Arm Versatile PCI host binding to a DT schema.

Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Andrew Murray <andrew.murray@arm.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
 2020-01-23 15:03:55 -06:00
Ooi, Joyce 81563bed1e MAINTAINERS: Replace Tien Hock Loh as Altera PIO maintainer 
This patch is to replace Tien Hock Loh as Altera PIO maintainer as he
has moved to a different role.

Signed-off-by: Ooi, Joyce <joyce.ooi@intel.com>
Link: https://lore.kernel.org/r/20200103170155.100743-1-joyce.ooi@intel.com
Acked-by: Tien Hock Loh <tien.hock.loh@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
 2020-01-23 16:33:16 +01:00
Linus Walleij a1dd4bfb14 intel-pinctrl for v5.6-1 
* Tiger Lake appears to have _HID enumeration, thus driver has been updated
 * Coffee Lake-S has the same IP as Sunrisepoint, thus ID has been added
 * Baytrail has got more clean ups and bug fixes, such as direct IRQ handling
 * Lynxpoint GPIO has been converted to true pin control driver
 * The common driver now uses IRQ chip enumeration via GPIO chip
 
 The following is an automated git shortlog grouped by driver:
 
 baytrail:
  -  Replace WARN with dev_info_once when setting direct-irq pin to output
  -  Do not clear IRQ flags on direct-irq enabled pins
  -  Reuse struct intel_pinctrl in the driver
  -  Use local variable to keep device pointer
  -  Keep pointer to struct device instead of its container
  -  Use GPIO direction definitions
  -  Move IRQ valid mask initialization to a dedicated callback
  -  Group GPIO IRQ chip initialization
  -  Allocate IRQ chip dynamic
 
 cherryview:
  -  Use GPIO direction definitions
 
 intel:
  -  Pass irqchip when adding gpiochip
  -  Add GPIO <-> pin mapping ranges via callback
  -  Share struct intel_pinctrl for wider use
  -  Use GPIO direction definitions
 
 lynxpoint:
  -  Update summary in the driver
  -  Switch to pin control API
  -  Add GPIO <-> pin mapping ranges via callback
  -  Implement ->pin_dbg_show()
  -  Add pin control operations
  -  Reuse struct intel_pinctrl in the driver
  -  Add pin control data structures
  -  Implement intel_gpio_get_direction callback
  -  Implement ->irq_ack() callback
  -  Move ownership check to IRQ chip
  -  Move lp_irq_type() closer to IRQ related routines
  -  Move ->remove closer to ->probe()
  -  Extract lp_gpio_acpi_use() for future use
  -  Convert unsigned to unsigned int
  -  Switch to memory mapped IO accessors
  -  Keep pointer to struct device instead of its container
  -  Relax GPIO request rules
  -  Assume 2 bits for mode selector
  -  Use standard pattern for memory allocation
  -  Use %pR to print IO resource
  -  Drop useless assignment
  -  Correct amount of pins
  -  Use raw_spinlock for locking
  -  Move GPIO driver to pin controller folder
 
 sunrisepoint:
  -  Add Coffee Lake-S ACPI ID
  -  Add missing Interrupt Status register offset
 
 tigerlake:
  -  Tiger Lake uses _HID enumeration
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEqaflIX74DDDzMJJtb7wzTHR8rCgFAl4lfB4ACgkQb7wzTHR8
 rCgy3g//VHTbsBk7+6NFXbI5iXgbU1sr9F9cIYbzawA3YLbR1Ioq9P89U3JPCeCz
 zaoxtd9HAxOxQrUFJGZKbsof6jS7Ee80mcvm0KQt2GNBmM4bZGS6qHofj5FAOxuz
 4MBjGINrlIntzG1RqjYxD+p2xuQ3p9H2yQIds9UTM1NB+hBIDLPx+3HUM2qbbf4s
 rbLQRc+kmVHoapmse6lV4lA2OyOW9BmgiTxeMaua/E6zyZ6WVNXLxXx+yXrEtUjj
 Q9M6moNZd4OP3pN/mGCyClLTMFyOcmaah6wdXy3GJRZ7/YD5+AnqbVTGsYLKy6To
 1w25Z6e6ygzbL8sqr5JwMiX9GnX6FeGEleY63zxvZ+WCC3TGWRzPWaTJuQIRToAz
 K3pdYWXOoK/J1fyzdjdkYHbqBbqjpB5oT/dWFx7Ii50kv41b8TEXPhDrWZSqvn9I
 J0KW/vICbsqPk8TBsQQ83nV6ILSTY5KakI8Qs5ngDov5oeKl0F/cLT9KqcY9nQdJ
 2mhJU5mn8cq4SvtyPD/NSRQHxX5xHx6Yi4KG2cXw0wJTZ+jP8rpl2di8ogDCFUK4
 fkQ/g+PhcPsW36kTKvLv57vhTqZ2u9rf9BcaJ7LGo9wsOjpGH6d4RCTiJ0VSn++T
 rkomWdFVgfMKmnsUwykyIV39mQzDy5e4vNO45wMs7LCimiRSkMA=
 =+ZAJ
 -----END PGP SIGNATURE-----

Merge tag 'intel-pinctrl-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel

intel-pinctrl for v5.6-1

* Tiger Lake appears to have _HID enumeration, thus driver has been updated
* Coffee Lake-S has the same IP as Sunrisepoint, thus ID has been added
* Baytrail has got more clean ups and bug fixes, such as direct IRQ handling
* Lynxpoint GPIO has been converted to true pin control driver
* The common driver now uses IRQ chip enumeration via GPIO chip

The following is an automated git shortlog grouped by driver:

baytrail:
 -  Replace WARN with dev_info_once when setting direct-irq pin to output
 -  Do not clear IRQ flags on direct-irq enabled pins
 -  Reuse struct intel_pinctrl in the driver
 -  Use local variable to keep device pointer
 -  Keep pointer to struct device instead of its container
 -  Use GPIO direction definitions
 -  Move IRQ valid mask initialization to a dedicated callback
 -  Group GPIO IRQ chip initialization
 -  Allocate IRQ chip dynamic

cherryview:
 -  Use GPIO direction definitions

intel:
 -  Pass irqchip when adding gpiochip
 -  Add GPIO <-> pin mapping ranges via callback
 -  Share struct intel_pinctrl for wider use
 -  Use GPIO direction definitions

lynxpoint:
 -  Update summary in the driver
 -  Switch to pin control API
 -  Add GPIO <-> pin mapping ranges via callback
 -  Implement ->pin_dbg_show()
 -  Add pin control operations
 -  Reuse struct intel_pinctrl in the driver
 -  Add pin control data structures
 -  Implement intel_gpio_get_direction callback
 -  Implement ->irq_ack() callback
 -  Move ownership check to IRQ chip
 -  Move lp_irq_type() closer to IRQ related routines
 -  Move ->remove closer to ->probe()
 -  Extract lp_gpio_acpi_use() for future use
 -  Convert unsigned to unsigned int
 -  Switch to memory mapped IO accessors
 -  Keep pointer to struct device instead of its container
 -  Relax GPIO request rules
 -  Assume 2 bits for mode selector
 -  Use standard pattern for memory allocation
 -  Use %pR to print IO resource
 -  Drop useless assignment
 -  Correct amount of pins
 -  Use raw_spinlock for locking
 -  Move GPIO driver to pin controller folder

sunrisepoint:
 -  Add Coffee Lake-S ACPI ID
 -  Add missing Interrupt Status register offset

tigerlake:
 -  Tiger Lake uses _HID enumeration
 2020-01-23 15:44:29 +01:00
David S. Miller 5169adbc98 wireless-drivers fixes for v5.5 
Second set of fixes for v5.5. There are quite a few patches,
 especially on iwlwifi, due to me being on a long break. Libertas also
 has a security fix and mt76 a build fix.
 
 iwlwifi
 
 * don't send the PPAG command when PPAG is disabled, since it can cause problems
 
 * a few fixes for a HW bug
 
 * a fix for RS offload;
 
 * a fix for 3168 devices where the NVM tables where the wrong tables were being read
 
 * fix a couple of potential memory leaks in TXQ code
 
 * disable L0S states in all hardware since our hardware doesn't
  officially support them anymore (and older versions of the hardware
  had instability in these states)
 
 * remove lar_disable parameter since it has been causing issues for
   some people who erroneously disable it
 
 * force the debug monitor HW to stop also when debug is disabled,
   since it sometimes stays on and prevents low system power states
 
 * don't send IWL_MVM_RXQ_NSSN_SYNC notification due to DMA problems
 
 libertas
 
 * fix two buffer overflows
 
 mt76
 
 * build fix related to CONFIG_MT76_LEDS
 
 * fix off by one in bitrates handling
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJeKX2wAAoJEG4XJFUm622bG8QH/3+QXaSJAVqzbQh2boy7aS88
 xhrrnh+bSqWY0ChMk0Z73RF8Ek0WlO+os4uN1cbWIWujrdQUPbTBtOwX4d0TzTue
 E3tBFPiHTlVtU43z1bsprA+6EE7fqt/H2lWtlxk0IHzeiQY9NcB6BlDKKCzk5Hib
 aMb5HCQy4JmSK83E60HLM9L4nEmEP+yveaKL7uaAZw+qkmyk2mT6um0TlmOYVoNG
 9V6k3OZto8LvyV6jKPZgVI6QBATnwHDxlWgooYRj54PuCj9hTbR2mcuUL2QyQeze
 AX2QNI+1kWIrAiDaU/lOj8579SiUl36iqtuKmtLhDnSe1GxDkrzmawtz3aGDm4k=
 =VZox
 -----END PGP SIGNATURE-----

Merge tag 'wireless-drivers-2020-01-23' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for v5.5

Second set of fixes for v5.5. There are quite a few patches,
especially on iwlwifi, due to me being on a long break. Libertas also
has a security fix and mt76 a build fix.

iwlwifi

* don't send the PPAG command when PPAG is disabled, since it can cause problems

* a few fixes for a HW bug

* a fix for RS offload;

* a fix for 3168 devices where the NVM tables where the wrong tables were being read

* fix a couple of potential memory leaks in TXQ code

* disable L0S states in all hardware since our hardware doesn't
 officially support them anymore (and older versions of the hardware
 had instability in these states)

* remove lar_disable parameter since it has been causing issues for
  some people who erroneously disable it

* force the debug monitor HW to stop also when debug is disabled,
  since it sometimes stays on and prevents low system power states

* don't send IWL_MVM_RXQ_NSSN_SYNC notification due to DMA problems

libertas

* fix two buffer overflows

mt76

* build fix related to CONFIG_MT76_LEDS

* fix off by one in bitrates handling
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
 2020-01-23 14:30:20 +01:00
Mark Brown 754a36a58c
Merge branch 'spi-5.6' into spi-next 2020-01-23 12:37:18 +00:00
Mark Brown 9909f7986a
Merge branch 'regulator-5.6' into regulator-next 2020-01-23 12:37:06 +00:00
Andrew Lunn 3adb4eaa1b MAINTAINERS: Make Russell King designated reviewer of phylib 
phylink and phylib are interconnected. It makes sense for phylib and
phy driver patches to be also reviewed by the phylink maintainer.
So add Russell King as a designed reviewer of phylib.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2020-01-23 08:25:53 +01:00
David S. Miller bda6a35505 net: Add Jakub to MAINTAINERS for networking general. 
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
 2020-01-22 20:38:39 +01:00
Andrew Murray 216bbaa337 MAINTAINERS: Update my email address 
I will lose access to my @arm.com email address next week, so
let's update the MAINTAINERS file and map it correctly in
.mailmap

Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
 2020-01-22 10:45:45 +00:00
Greg Kroah-Hartman c318f074d9 Merge 5.5-rc7 into staging-next 
We want the staging fixes in here as well

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2020-01-22 09:05:34 +01:00
Greg Kroah-Hartman dd7d99dc68 Merge 5.5-rc7 into usb-next 
We need the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2020-01-21 19:36:59 +01:00
Olof Johansson 96b34bac41 This pull request contains Broadcom SoCs MAINTAINERS file updates for 
5.6, please pull the following:
 
 - Nicolas adds an entry for the Broadcom STB PCIe Root Complex files for
   both BCM7xxx (actual STB SoCs) and BCM2711 (Raspberry Pi 4).
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAl4iepcACgkQh9CWnEQH
 BwT3jg/+K9+5zXLbbbmd2hkMTtOaNcKBX3vVTQoYCENSv+PXqhIc3z8be/wH+2bT
 wOWwYL1EP0Fjhnpe5JM/r1Z7wpGukNCCFmwu33ly5gc25albr4XLEI8/kXgFZPSQ
 Tg/IdFttY0VaIjXrUDh6lCTb3OJkR2vuprivZQpKUZO0pi2wfNNgmQVJOsdVtvEB
 9H6OUIV3CP79tJbEPchM7AV0aoOXMY3tfubKNgBzgW6hr9p4MsQWQiQfiLmCqB+H
 EcMTogFJ63Z239cnH/bCd363PGKJacI3BMB4FQ+7otI8Pl2pN1e39iYKF8Ch5+vt
 JFdh5eOfmVnJ/FInDKYt/u+lsPGYMt1aseZrJZlgwO1ZSR8/kpyr0bzsy5E9Koyh
 LW7NOIF1xXhmOip2CXArAeyfIV5toGyVIFvqLB21Mv5u9Xgzo7kq5nJi7AtnVEns
 1LWKMG7qD9dVQT3nVKlxGeE0SXuxANVxgRI7OJ+++6l1XUeSuG0ZU5hRIRGBwKbg
 6zFSyp94VolF/cx3BripJVYNWBBDeRDiE2fSAcvxGO5almRB0k0V7Cf4r/c8uYtC
 NYtk7LUZb2Gz8kUUoJv7Uoa8G6oGECYRZ92kBtsk9vRKPUQWNYakrRCxXbTLRDkj
 1/l98A1iHUqDpEOfSVO+0RdFCbmNAkmyPBVz1eS4wBxUWYHk29M=
 =OIMI
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-5.6/maintainers' of https://github.com/Broadcom/stblinux into arm/drivers

This pull request contains Broadcom SoCs MAINTAINERS file updates for
5.6, please pull the following:

- Nicolas adds an entry for the Broadcom STB PCIe Root Complex files for
  both BCM7xxx (actual STB SoCs) and BCM2711 (Raspberry Pi 4).

* tag 'arm-soc/for-5.6/maintainers' of https://github.com/Broadcom/stblinux:
  MAINTAINERS: Add brcmstb PCIe controller entry

Link: https://lore.kernel.org/r/20200118032935.1346-1-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
 2020-01-20 11:22:49 -08:00
Eddie James 04f605906f irqchip: Add Aspeed SCU interrupt controller 
The Aspeed SOCs provide some interrupts through the System Control
Unit registers. Add an interrupt controller that provides these
interrupts to the system.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/1579123790-6894-3-git-send-email-eajames@linux.ibm.com
 2020-01-20 19:10:04 +00:00
Eddie James 5350a237b4 dt-bindings: interrupt-controller: Add Aspeed SCU interrupt controller 
Document the Aspeed SCU interrupt controller and add an include file
for the interrupts it provides.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/1579123790-6894-2-git-send-email-eajames@linux.ibm.com
 2020-01-20 19:10:03 +00:00
Dave Airlie 3d4743131b Linux 5.5-rc7 
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl4k7i8eHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGvk0IAKRenVOdiudY77SQ
 VZjsteyrYTTQtPPv494ToIRjR0XQ+gYp8vyWzXTUC5Nm9Y9U3VzDqUPUjWszrSXE
 6mU+tzcMc9qwuUxnIFn8zfg64ygw+37sn/w3xqeH4QmF9Z5Wl3EX3SdXTs7jp3RS
 VxiztkUNI5ZBV2GDtla5K/9qLPqCQnUYXIiyi5lAtBtiitZDVXFp7dy7hMgEiaEO
 +78K5Kh3xlt5ndDsBFOlwIb2Oof3KL7bBXntdbSBc/bjol6IRvAgln48HWCv59G2
 jzAp2tj2KobX9GRAEPj+v4TQZEW0SXDNDi8MgQsM+3DYVCTmANsv57CBKRuf01+F
 nB1kAys=
 =zSnJ
 -----END PGP SIGNATURE-----

Backmerge v5.5-rc7 into drm-next

msm needs 5.5-rc4, go to the latest.

Signed-off-by: Dave Airlie <airlied@redhat.com>
 2020-01-20 11:42:57 +10:00
David S. Miller b3f7e3f23a Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net 2020-01-19 22:10:04 +01:00
Linus Torvalds 11a8272947 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 
Pull networking fixes from David Miller:

 1) Fix non-blocking connect() in x25, from Martin Schiller.

 2) Fix spurious decryption errors in kTLS, from Jakub Kicinski.

 3) Netfilter use-after-free in mtype_destroy(), from Cong Wang.

 4) Limit size of TSO packets properly in lan78xx driver, from Eric
    Dumazet.

 5) r8152 probe needs an endpoint sanity check, from Johan Hovold.

 6) Prevent looping in tcp_bpf_unhash() during sockmap/tls free, from
    John Fastabend.

 7) hns3 needs short frames padded on transmit, from Yunsheng Lin.

 8) Fix netfilter ICMP header corruption, from Eyal Birger.

 9) Fix soft lockup when low on memory in hns3, from Yonglong Liu.

10) Fix NTUPLE firmware command failures in bnxt_en, from Michael Chan.

11) Fix memory leak in act_ctinfo, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits)
  cxgb4: reject overlapped queues in TC-MQPRIO offload
  cxgb4: fix Tx multi channel port rate limit
  net: sched: act_ctinfo: fix memory leak
  bnxt_en: Do not treat DSN (Digital Serial Number) read failure as fatal.
  bnxt_en: Fix ipv6 RFS filter matching logic.
  bnxt_en: Fix NTUPLE firmware command failures.
  net: systemport: Fixed queue mapping in internal ring map
  net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec
  net: dsa: sja1105: Don't error out on disabled ports with no phy-mode
  net: phy: dp83867: Set FORCE_LINK_GOOD to default after reset
  net: hns: fix soft lockup when there is not enough memory
  net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key()
  net/sched: act_ife: initalize ife->metalist earlier
  netfilter: nat: fix ICMP header corruption on ICMP errors
  net: wan: lapbether.c: Use built-in RCU list checking
  netfilter: nf_tables: fix flowtable list del corruption
  netfilter: nf_tables: fix memory leak in nf_tables_parse_netdev_hooks()
  netfilter: nf_tables: remove WARN and add NLA_STRING upper limits
  netfilter: nft_tunnel: ERSPAN_VERSION must not be null
  netfilter: nft_tunnel: fix null-attribute check
  ...
 2020-01-19 12:03:53 -08:00
Aleksa Sarai fddb5d430a open: introduce openat2(2) syscall 
/* Background. */
For a very long time, extending openat(2) with new features has been
incredibly frustrating. This stems from the fact that openat(2) is
possibly the most famous counter-example to the mantra "don't silently
accept garbage from userspace" -- it doesn't check whether unknown flags
are present[1].

This means that (generally) the addition of new flags to openat(2) has
been fraught with backwards-compatibility issues (O_TMPFILE has to be
defined as __O_TMPFILE|O_DIRECTORY|[O_RDWR or O_WRONLY] to ensure old
kernels gave errors, since it's insecure to silently ignore the
flag[2]). All new security-related flags therefore have a tough road to
being added to openat(2).

Userspace also has a hard time figuring out whether a particular flag is
supported on a particular kernel. While it is now possible with
contemporary kernels (thanks to [3]), older kernels will expose unknown
flag bits through fcntl(F_GETFL). Giving a clear -EINVAL during
openat(2) time matches modern syscall designs and is far more
fool-proof.

In addition, the newly-added path resolution restriction LOOKUP flags
(which we would like to expose to user-space) don't feel related to the
pre-existing O_* flag set -- they affect all components of path lookup.
We'd therefore like to add a new flag argument.

Adding a new syscall allows us to finally fix the flag-ignoring problem,
and we can make it extensible enough so that we will hopefully never
need an openat3(2).

/* Syscall Prototype. */
  /*
   * open_how is an extensible structure (similar in interface to
   * clone3(2) or sched_setattr(2)). The size parameter must be set to
   * sizeof(struct open_how), to allow for future extensions. All future
   * extensions will be appended to open_how, with their zero value
   * acting as a no-op default.
   */
  struct open_how { /* ... */ };

  int openat2(int dfd, const char *pathname,
              struct open_how *how, size_t size);

/* Description. */
The initial version of 'struct open_how' contains the following fields:

  flags
    Used to specify openat(2)-style flags. However, any unknown flag
    bits or otherwise incorrect flag combinations (like O_PATH|O_RDWR)
    will result in -EINVAL. In addition, this field is 64-bits wide to
    allow for more O_ flags than currently permitted with openat(2).

  mode
    The file mode for O_CREAT or O_TMPFILE.

    Must be set to zero if flags does not contain O_CREAT or O_TMPFILE.

  resolve
    Restrict path resolution (in contrast to O_* flags they affect all
    path components). The current set of flags are as follows (at the
    moment, all of the RESOLVE_ flags are implemented as just passing
    the corresponding LOOKUP_ flag).

    RESOLVE_NO_XDEV       => LOOKUP_NO_XDEV
    RESOLVE_NO_SYMLINKS   => LOOKUP_NO_SYMLINKS
    RESOLVE_NO_MAGICLINKS => LOOKUP_NO_MAGICLINKS
    RESOLVE_BENEATH       => LOOKUP_BENEATH
    RESOLVE_IN_ROOT       => LOOKUP_IN_ROOT

open_how does not contain an embedded size field, because it is of
little benefit (userspace can figure out the kernel open_how size at
runtime fairly easily without it). It also only contains u64s (even
though ->mode arguably should be a u16) to avoid having padding fields
which are never used in the future.

Note that as a result of the new how->flags handling, O_PATH|O_TMPFILE
is no longer permitted for openat(2). As far as I can tell, this has
always been a bug and appears to not be used by userspace (and I've not
seen any problems on my machines by disallowing it). If it turns out
this breaks something, we can special-case it and only permit it for
openat(2) but not openat2(2).

After input from Florian Weimer, the new open_how and flag definitions
are inside a separate header from uapi/linux/fcntl.h, to avoid problems
that glibc has with importing that header.

/* Testing. */
In a follow-up patch there are over 200 selftests which ensure that this
syscall has the correct semantics and will correctly handle several
attack scenarios.

In addition, I've written a userspace library[4] which provides
convenient wrappers around openat2(RESOLVE_IN_ROOT) (this is necessary
because no other syscalls support RESOLVE_IN_ROOT, and thus lots of care
must be taken when using RESOLVE_IN_ROOT'd file descriptors with other
syscalls). During the development of this patch, I've run numerous
verification tests using libpathrs (showing that the API is reasonably
usable by userspace).

/* Future Work. */
Additional RESOLVE_ flags have been suggested during the review period.
These can be easily implemented separately (such as blocking auto-mount
during resolution).

Furthermore, there are some other proposed changes to the openat(2)
interface (the most obvious example is magic-link hardening[5]) which
would be a good opportunity to add a way for userspace to restrict how
O_PATH file descriptors can be re-opened.

Another possible avenue of future work would be some kind of
CHECK_FIELDS[6] flag which causes the kernel to indicate to userspace
which openat2(2) flags and fields are supported by the current kernel
(to avoid userspace having to go through several guesses to figure it
out).

[1]: https://lwn.net/Articles/588444/
[2]: https://lore.kernel.org/lkml/CA+55aFyyxJL1LyXZeBsf2ypriraj5ut1XkNDsunRBqgVjZU_6Q@mail.gmail.com
[3]: commit 629e014bb8 ("fs: completely ignore unknown open flags")
[4]: https://sourceware.org/bugzilla/show_bug.cgi?id=17523
[5]: https://lore.kernel.org/lkml/20190930183316.10190-2-cyphar@cyphar.com/
[6]: https://youtu.be/ggD-eb3yPVs

Suggested-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 2020-01-18 09:19:18 -05:00
Lukas Bulwahn b2aa09178d MAINTAINERS: Mark simple firmware interface (SFI) obsolete 
Len Brown has not been active in this part since around 2010 and
confirmed that he is not maintaining this part of the kernel sources
anymore and the git log suggests that nobody is actively maintaining it.

The referenced git tree does not exist. Instead, I found an sfi branch
in Len's kernel git repository, but that has not been updated since 2014;
so that is not worth to be mentioned in MAINTAINERS now anymore either.

Len Brown expects no further systems to be shipped with SFI, so we can
mark it obsolete and schedule it for deletion.

This change was motivated after I found that I could not send any mails
to the sfi-devel mailing list, and that the mailing list does not exist
anymore.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200118082545.23464-1-lukas.bulwahn@gmail.com
 2020-01-18 11:38:37 +01:00
Nicolas Saenz Julienne e0b7094053 MAINTAINERS: Add brcmstb PCIe controller entry 
The controller serves both the Raspberry Pi 4 (bcm2711) and brcmstb
platforms.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
 2020-01-17 19:23:03 -08:00
Linus Torvalds 575966e080 ARM: SoC fixes 
I've been sitting on these longer than I meant, so the patch count is
 a bit higher than ideal for this part of the release. There's also some
 reverts of double-applied patches that brings the diffstat up a bit.
 
 With that said, the biggest changes are:
 
  - Revert of duplicate i2c device addition on two Aspeed (BMC) Devicetrees.
  - Move of two device nodes that got applied to the wrong part of the
    tree on ASpeed G6.
  - Regulator fix for Beaglebone X15 (adding 12/5V supplies)
  - Use interrupts for keys on Amlogic SM1 to avoid missed polls
 
 In addition to that, there is a collection of smaller DT fixes:
 
  - Power supply assignment fixes for i.MX6
  - Fix of interrupt line for magnetometer on i.MX8 Librem5 devkit
  - Build fixlets (selects) for davinci/omap2+
  - More interrupt number fixes for Stratix10, Amlogic SM1, etc.
  - ... and more similar fixes across different platforms
 
 And some non-DT stuff:
 
  - optee fix to register multiple shared pages properly
  - Clock calculation fixes for MMP3
  - Clock fixes for OMAP as well
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl4hIooPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3vckP/jT/yrodXuK3OLtBnDQI4Em5b14uJQxEAsh+
 fTaz1H3n82PaWJVaEXpRTYMa4WZnmMPazoAoDhuqWnz/VbzfXmufFIIXsQ0rJqbf
 Ht1LWvx7hd5q49aq2x1o9Nuo5OKMbW8igQqsx7PqjSOQRaAZTkxZhOI1C9pKnnnD
 oJU8nw19N8yCQILxXMmpBX2vczWyJ3tgH6v8rhB89riBXouqwcKbTRyI0ciFdO91
 mPlfF9qwqZ99bb+7WqalrtOr+/0VgvhB3oCNzoWYPptipiaLGdH4ZXVEhyCUDmrY
 WN1kZsBtK+jtDLcMdRqg+EmbijxcxA0DSLDCow1QwuMPNHxVN5du1JN7b4uTvCPX
 sHbrDO/YdiSWx20VZID/x/sWqcQyBrDqZkA3NWhoClm75JGQUHP16pZUURCN/awy
 IGApkQ5164Ac+2DFHgh3S7qKXWk7O+hY6iksyRPPZkj31d4mCimdVaHDV/c3aeI/
 EnUI6nj6H3ghYTX2gl3yhT8d4yCM+2uSawdIFWGNvB85vs1koAUEuczc6Me8JdZV
 4HWexVs8W0Jo1w3Ndq3Hxw0RTKccC34x1f4dnzSSSEF7t4GMveTdecd/D77aiT2x
 eVNox3PIAfjR96et2vQ1C+hVRyEqn/hDapvR5OI/78F2ampee8m8tWQDYIlH/RbZ
 pdBTN5CS
 =MMJu
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Olof Johansson:
 "I've been sitting on these longer than I meant, so the patch count is
  a bit higher than ideal for this part of the release. There's also
  some reverts of double-applied patches that brings the diffstat up a
  bit.

  With that said, the biggest changes are:

   - Revert of duplicate i2c device addition on two Aspeed (BMC)
     Devicetrees.

   - Move of two device nodes that got applied to the wrong part of the
     tree on ASpeed G6.

   - Regulator fix for Beaglebone X15 (adding 12/5V supplies)

   - Use interrupts for keys on Amlogic SM1 to avoid missed polls

  In addition to that, there is a collection of smaller DT fixes:

   - Power supply assignment fixes for i.MX6

   - Fix of interrupt line for magnetometer on i.MX8 Librem5 devkit

   - Build fixlets (selects) for davinci/omap2+

   - More interrupt number fixes for Stratix10, Amlogic SM1, etc.

   - ... and more similar fixes across different platforms

  And some non-DT stuff:

   - optee fix to register multiple shared pages properly

   - Clock calculation fixes for MMP3

   - Clock fixes for OMAP as well"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits)
  MAINTAINERS: Add myself as the co-maintainer for Actions Semi platforms
  ARM: dts: imx7: Fix Toradex Colibri iMX7S 256MB NAND flash support
  ARM: dts: imx6sll-evk: Remove incorrect power supply assignment
  ARM: dts: imx6sl-evk: Remove incorrect power supply assignment
  ARM: dts: imx6sx-sdb: Remove incorrect power supply assignment
  ARM: dts: imx6qdl-sabresd: Remove incorrect power supply assignment
  ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL
  ARM: omap2plus: select RESET_CONTROLLER
  ARM: davinci: select CONFIG_RESET_CONTROLLER
  ARM: dts: aspeed: rainier: Fix fan fault and presence
  ARM: dts: aspeed: rainier: Remove duplicate i2c busses
  ARM: dts: aspeed: tacoma: Remove duplicate flash nodes
  ARM: dts: aspeed: tacoma: Remove duplicate i2c busses
  ARM: dts: aspeed: tacoma: Fix fsi master node
  ARM: dts: aspeed-g6: Fix FSI master location
  ARM: dts: mmp3: Fix the TWSI ranges
  clk: mmp2: Fix the order of timer mux parents
  ARM: mmp: do not divide the clock rate
  arm64: dts: rockchip: Fix IR on Beelink A1
  optee: Fix multi page dynamic shm pool alloc
  ...
 2020-01-16 19:42:08 -08:00
Manivannan Sadhasivam 70db729fe1 MAINTAINERS: Add myself as the co-maintainer for Actions Semi platforms 
Since I've been doing the maintainership work for couple of cycles, we've
decided to add myself as the co-maintainer along with Andreas.

Link: https://lore.kernel.org/r/20200114084348.25659-2-manivannan.sadhasivam@linaro.org
Cc: "Andreas Färber" <afaerber@suse.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
 2020-01-16 15:49:19 -08:00
Niklas Söderlund 941a0e3bad dt-bindings: rcar-csi2: Convert bindings to json-schema 
Convert Renesas R-Car MIPI CSI-2 receiver bindings documentation to
json-schema.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Rob Herring <robh@kernel.org>
 2020-01-15 12:49:09 -06:00
Wolfram Sang d02e5ee09b Merge branch 'i2c/for-current' into i2c/for-5.6 2020-01-15 18:31:37 +01:00
Wolfram Sang 710b65335c i2c: parport-light: remove driver 
The justification of a light version of the parport driver was less
overhead for embedded systems. Well, today, even if an embedded system
still has a parport, it surely can handle the fully-fledged parport
driver. Remove it to reduce the maintenance burden.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
 2020-01-15 18:18:34 +01:00
Logan Gunthorpe 905ca51e63 dmaengine: plx-dma: Introduce PLX DMA engine PCI driver skeleton 
Some PLX Switches can expose DMA engines via extra PCI functions
on the upstream port. Each function will have one DMA channel.

This patch is just the core PCI driver skeleton and dma
engine registration.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://lore.kernel.org/r/20200103212021.2881-2-logang@deltatee.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
 2020-01-15 19:40:51 +05:30
Ley Foon Tan 051d75d3bb MAINTAINERS: Update Ley Foon Tan's email address 
@altera.com email is going to removed. Change to @intel.com email.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
 2020-01-15 11:11:22 +08:00
Laurentiu Tudor 7771b893f0 MAINTAINERS: Add myself as maintainer of ehv_bytechan tty driver 
Michael Ellerman made a call for volunteers from NXP to maintain
this driver and I offered myself.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Acked-by: Timur Tabi <timur@kernel.org>
Link: https://lore.kernel.org/r/20200114110012.17351-1-laurentiu.tudor@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2020-01-14 14:37:54 +01:00
Andrei Vagin 769071ac9f ns: Introduce Time Namespace 
Time Namespace isolates clock values.

The kernel provides access to several clocks CLOCK_REALTIME,
CLOCK_MONOTONIC, CLOCK_BOOTTIME, etc.

CLOCK_REALTIME
      System-wide clock that measures real (i.e., wall-clock) time.

CLOCK_MONOTONIC
      Clock that cannot be set and represents monotonic time since
      some unspecified starting point.

CLOCK_BOOTTIME
      Identical to CLOCK_MONOTONIC, except it also includes any time
      that the system is suspended.

For many users, the time namespace means the ability to changes date and
time in a container (CLOCK_REALTIME). Providing per namespace notions of
CLOCK_REALTIME would be complex with a massive overhead, but has a dubious
value.

But in the context of checkpoint/restore functionality, monotonic and
boottime clocks become interesting. Both clocks are monotonic with
unspecified starting points. These clocks are widely used to measure time
slices and set timers. After restoring or migrating processes, it has to be
guaranteed that they never go backward. In an ideal case, the behavior of
these clocks should be the same as for a case when a whole system is
suspended. All this means that it is required to set CLOCK_MONOTONIC and
CLOCK_BOOTTIME clocks, which can be achieved by adding per-namespace
offsets for clocks.

A time namespace is similar to a pid namespace in the way how it is
created: unshare(CLONE_NEWTIME) system call creates a new time namespace,
but doesn't set it to the current process. Then all children of the process
will be born in the new time namespace, or a process can use the setns()
system call to join a namespace.

This scheme allows setting clock offsets for a namespace, before any
processes appear in it.

All available clone flags have been used, so CLONE_NEWTIME uses the highest
bit of CSIGNAL. It means that it can be used only with the unshare() and
the clone3() system calls.

[ tglx: Adjusted paragraph about clone3() to reality and massaged the
  	changelog a bit. ]

Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://criu.org/Time_namespace
Link: https://lists.openvz.org/pipermail/criu/2018-June/041504.html
Link: https://lore.kernel.org/r/20191112012724.250792-4-dima@arista.com
 2020-01-14 12:20:48 +01:00
Srinivas Pandruvada d81d18fd34 MAINTAINERS: Update for the intel uncore frequency control 
Add an entry for drivers/platform/x86/intel-uncore-frequency.c.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
 2020-01-13 21:02:36 +02:00
Masami Hiramatsu 7b9b816f4b Documentation: bootconfig: Add a doc for extended boot config 
Add a documentation for extended boot config under
admin-guide, since it is including the syntax of boot config.

Link: http://lkml.kernel.org/r/157867230658.17873.9309879174829924324.stgit@devnote2

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
 2020-01-13 13:19:40 -05:00
Masami Hiramatsu c1a3c36017 proc: bootconfig: Add /proc/bootconfig to show boot config list 
Add /proc/bootconfig which shows the list of key-value pairs
in boot config. Since after boot, all boot configs and tree
are removed, this interface just keep a copy of key-value
pairs in text.

Link: http://lkml.kernel.org/r/157867225967.17873.12155805787236073787.stgit@devnote2

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
 2020-01-13 13:19:39 -05:00
Masami Hiramatsu 950313ebf7 tools: bootconfig: Add bootconfig command 
Add "bootconfig" command which operates the bootconfig
config-data on initrd image.

User can add/delete/verify the boot config on initrd
image using this command.

e.g.
Add a boot config to initrd image
 # bootconfig -a myboot.conf /boot/initrd.img

Remove it.
 # bootconfig -d /boot/initrd.img

Or verify (and show) it.
 # bootconfig /boot/initrd.img

Link: http://lkml.kernel.org/r/157867223582.17873.14342161849213219982.stgit@devnote2

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
[ Removed extra blank line at end of bootconfig.c ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
 2020-01-13 13:19:39 -05:00
Masami Hiramatsu 76db5a27a8 bootconfig: Add Extra Boot Config support 
Extra Boot Config (XBC) allows admin to pass a tree-structured
boot configuration file when boot up the kernel. This extends
the kernel command line in an efficient way.

Boot config will contain some key-value commands, e.g.

key.word = value1
another.key.word = value2

It can fold same keys with braces, also you can write array
data. For example,

key {
   word1 {
      setting1 = data
      setting2
   }
   word2.array = "val1", "val2"
}

User can access these key-value pair and tree structure via
SKC APIs.

Link: http://lkml.kernel.org/r/157867221257.17873.1775090991929862549.stgit@devnote2

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
 2020-01-13 13:19:38 -05:00
Sean Christopherson 159348784f x86/vmx: Introduce VMX_FEATURES_* 
Add a VMX-specific variant of X86_FEATURE_* flags, which will eventually
supplant the synthetic VMX flags defined in cpufeatures word 8.  Use the
Intel-defined layouts for the major VMX execution controls so that their
word entries can be directly populated from their respective MSRs, and
so that the VMX_FEATURE_* flags can be used to define the existing bit
definitions in asm/vmx.h, i.e. force developers to define a VMX_FEATURE
flag when adding support for a new hardware feature.

The majority of Intel's (and compatible CPU's) VMX capabilities are
enumerated via MSRs and not CPUID, i.e. querying /proc/cpuinfo doesn't
naturally provide any insight into the virtualization capabilities of
VMX enabled CPUs.  Commit

  e38e05a858 ("x86: extended "flags" to show virtualization HW feature
		 in /proc/cpuinfo")

attempted to address the issue by synthesizing select VMX features into
a Linux-defined word in cpufeatures.

Lack of reporting of VMX capabilities via /proc/cpuinfo is problematic
because there is no sane way for a user to query the capabilities of
their platform, e.g. when trying to find a platform to test a feature or
debug an issue that has a hardware dependency.  Lack of reporting is
especially problematic when the user isn't familiar with VMX, e.g. the
format of the MSRs is non-standard, existence of some MSRs is reported
by bits in other MSRs, several "features" from KVM's point of view are
enumerated as 3+ distinct features by hardware, etc...

The synthetic cpufeatures approach has several flaws:

  - The set of synthesized VMX flags has become extremely stale with
    respect to the full set of VMX features, e.g. only one new flag
    (EPT A/D) has been added in the the decade since the introduction of
    the synthetic VMX features.  Failure to keep the VMX flags up to
    date is likely due to the lack of a mechanism that forces developers
    to consider whether or not a new feature is worth reporting.

  - The synthetic flags may incorrectly be misinterpreted as affecting
    kernel behavior, i.e. KVM, the kernel's sole consumer of VMX,
    completely ignores the synthetic flags.

  - New CPU vendors that support VMX have duplicated the hideous code
    that propagates VMX features from MSRs to cpufeatures.  Bringing the
    synthetic VMX flags up to date would exacerbate the copy+paste
    trainwreck.

Define separate VMX_FEATURE flags to set the stage for enumerating VMX
capabilities outside of the cpu_has() framework, and for adding
functional usage of VMX_FEATURE_* to help ensure the features reported
via /proc/cpuinfo is up to date with respect to kernel recognition of
VMX capabilities.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20191221044513.21680-10-sean.j.christopherson@intel.com
 2020-01-13 17:57:26 +01:00
Greg Kroah-Hartman 845f081002 Merge 5.5-rc6 into usb-next 
We need the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2020-01-13 12:11:40 +01:00
Greg Kroah-Hartman d40310f657 Merge 5.5-rc6 into staging-next 
We need the staging fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2020-01-13 07:52:17 +01:00
Jakub Kicinski c9f53049d4 MAINTAINERS: update my email address 
My Netronome email address may become inactive soon.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2020-01-11 14:33:39 -08:00
Jacob Keller 6c39e015f8 devlink: convert driver-specific files to reStructuredText 
Several drivers document what parameters they support in
a devlink-params-*.txt file. This file is supposed to contain both the
list of generic parameters implemented by the driver, as well as a list
of driver-specific parameters and their descriptions.

It would also be good if the driver documentation included other
driver-specific implementations, such as info versions, devlink
regions, and so forth.

Convert all of these documentation files to reStructuredText, and rename
them to just the driver name. Future changes will include other
driver-specific implementations. Each file will contain a table for the
generic parameters implemented, as well as a separate table for the
driver-specific parameters.

Future sections such as for devlink info versions will be added to these
files. This avoids creating additional devlink-<feature>-<driver> files
for each devlink feature, reducing clutter in the documentation folder.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Ido Schimmel <idosch@mellanox.com>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2020-01-10 17:06:59 -08:00
Jacob Keller f4bdd71036 devlink: move devlink documentation to subfolder 
Combine the documentation for devlink into a subfolder, and provide an
index.rst file that can be used to generally describe devlink.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2020-01-10 17:06:59 -08:00
Kees Cook 46d1a0f03d selftests/lkdtm: Add tests for LKDTM targets 
This adds a basic framework for running all the "safe" LKDTM tests. This
will allow easy introspection into any selftest logs to examine the
results of most LKDTM tests.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
 2020-01-10 14:50:28 -07:00
Daniel W. S. Almeida a1986433a9 Documentation: filesystems: convert vfat.txt to RST 
Converts vfat.txt to the reStructuredText format, improving presentation
without changing the underlying content.

Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
-----------------------------------------------------------
Changes in v3:
Removed unnecessary markup.
Removed section "BUG REPORTS" as recommended by the maintainer.

Changes in v2:
Refactored long lines as pointed out by Jonathan
Copied the maintainer
Updated the reference in the MAINTAINERS file for vfat

I did not move this into admin-guide, waiting on what the
maintainer has to say about this and also about old sections
in the text, if any.

Link: https://lore.kernel.org/r/20191223010030.434902-1-dwlsalmeida@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
 2020-01-10 10:58:45 -07:00
John Garry 99eb0a1221
MAINTAINERS: Add a maintainer for the HiSilicon v3xx SFC driver 
Set John Garry @ Huawei as the maintainer.

Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1575900490-74467-4-git-send-email-john.garry@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
 2020-01-10 14:14:47 +00:00
Greg Kroah-Hartman 821f7ce79f First set of new device support, features and cleanups for IIO in the 5.6 cycle 
New device support
 
 * ad7091r5 ADC
   - New driver with follow up patch adding scale and vref support.
   - DT bindings
 * ad7923
   - Support for ad7908, ad7918 and ad7928 added to driver.
 * bma180
   - Support the BMA254 accelerometer. Required fairly substantial rework
     to allow for small differences between this an existing parts.
 * bma400 accelerometer
   - New driver with follow up patch for regulator support.
   - DT bindings.
 * asc dlhl60d
   - New driver support this range of pressure and temperature sensors.
   - DT bindings.
 * ltc2496 ADC
   - New driver to support this ADC.
   - Split the existing LTC2497 driver generic component out and reuse.
   - DT bindings.
 * parallax ping
   - New driver supporting ultrasonic and laser tof distance sensors.
   - Bindings for these sensors.
 
 New features
 
 * core
   - New char type for read_raw returns, used for thermocouple types.
   - Rename read_first_n callback to read.   The reasons behind the original
     naming are lost to the mists of time.
 * ad799x
   - Allow pm_ops to disable device completely allowing regulator power down.
 * bma180
   - Enable basic regulator support.
 * dmaengine buffer
   - Report platform data alignment requirements via new ABI.
 * max31856
   - Add option to set mains filter rejection frequency and document
     new in_temp_filter_notch_center_frequency ABI.
   - Add support for configuring HW averaging (oversampling ratio)
   - Add runtime configuration of thermocouple type and document new ABI.
 * maxim-thermocouple
   - Add read only access to thermocouple type using new ABI, includes
     adding more specific compatibles to reflect which variant of the
     chip is being used.
 * mpu6050
   - Provide option to support the PMU9150 in package magnetometer directly
     rather than via auxiliary bus.
 * stm32_adc
   - Add overrun interrupt checks to detect if this happens.
 * st_lsm6dsx
   - Enable the sensor-hub support for lsm6dsm. Includes various reworks to
     allow this.
 
 Cleanups and minor fixes
 
 * Subsystem wide
   - Tidy up indentation in Kconfig and fix alphabetical order of AD7091R5.
   - Drop linux/gpio.h and linux/of_gpio.h from drivers that don't use them.
 * ad7266
   - Convert to GPIO descriptors.
 * ad7303
   - Avoid a dance with checking if the regulator is supplied by just
     using the optional request interface.
 * ad7887
   - Simplify channel specification assignment to enable adding more devices.
 * ad7923
   - Drop some unused and largely pointless defines of BOB_N==N variety.
   - Tidy up checkpatch warnings.
   - Add missing of_device_id table.
 * adf4350
   - Convert to GPIO descriptors.
 * ak8975
   - Convert to GPIO descriptors.
 * ADIS library and drivers
   - Expand scope of txrx_lock to cover all state and rename as state_lock
   - Add unlocked read / write to allow grouping of consecutive calls under
     single lock / unlock.
   - Add unlocked check_status, reset to allow grouping under single
     lock / unlock.
   - Remove remaining uses of core mlock for local state protection.
     mlock should never be used directly as it protects tightly defined
     core IIO device management state.
 * adis16240
   - Enforce only supported SPI mode on driver load + add DT binding doc.
 * atlas-ph-sensor
   - Rename to atlas-sensor given it now covers things beyond ph sensors.
 * bma180
   - Use local dev variable to tidy up code.
   - Use c99 style explicity .member assignment to make driver more readable.
 * bmp280
   - Drop ACPI support. No evidence this was used and appropriate ID is not
     registered.
   - Allow ACPI to bind device via PRP0001
 * dmaengine buffer
   - Use dma_request_chan instead of dma_request_slave_channel_reason as that
     ABI is going away.
   - Add module info to avoid tainting the kernel.
 * hts221
   - Avoid magic number defines when only used to fill structure elements
     that are self describing.
 * lm3533
   - Drop a stray semicolon.
 * max9611
   - Cleanup enum handling to be more resilient to future changes.
 * mpu6050
   - Delete MPU9150 from supported SPI devices as doesn't provide SPI.
   - Select I2C_MUX again after kbuild issue fixed elsewhere.
 * stm32-timer
   - Drop an unnecessary register update.
 * ssp_sensors
   - Convert to GPIO descriptors.
 * st_sensors
   - drop !CONFIG_ACPI defines as ACPI_PTR() will stop them being used
     anyway.
   - Make default platform data structures __maybe_unsued.
   - Fill in some missing kernel-doc function parameters.
 * st_lsm6dsx
   - white space fixes.
   - Mark some constants that aren't always used as __maybe_unused.
   - Drop of ID table guards as they just pervent use under ACPI.
   - Switch to device properties to allow ACPI usage.
 * st_uvis25
   - Drop acpi.h include as no ACPI APIs used.
 * ti-ads1015
   - Drop legacy platform data as no one seems to be using it.
   - Use the device property API instead of OF specific.
 * ti-ads7950
   - typo fix in error message.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl4R2mwRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0Fogfow//Rfsrd2oiAwy4ypm70ZWGnr84C3O/Vpic
 Agwdd2/lHiCA2Gjg+n7ZT6XkKQmKiojuBMT05PuskEm5onJVQuSAKMVppXwU6UDP
 uOUS5MAbo87GLogzXJnAR/eCrx/VkC4UqFRBSi7IUIj+lTpjiOhmoqm78VTMxkgT
 hvp5PVN/mLNxNV3eVrR9uILjZLpbBjKjWil00IS2zj0o78sGtd2QtMIdTbn3iBLp
 m0ngCDww1KDH+idwbOIn8YX8GSK8mTjNV5q4r9+xnjoAk8RPk+H317idyRHCKfCM
 wWFSFB6u/oqtHXRgQVi3ndRrZnPLTycA/R20f3ezzhVYZzf3RpH8Upcx0lqqCmrB
 +ZTbYW1L7KL6zCSR4ZYIEmw2TeQngfCGy0yDoEDXm9V8/B2nGWFc3Iknq+fK415V
 7OgJCWAw6ybF2LZfJHpcuJTb0EPxCKnInHbRsaxCsSAPRyERSdAz8RLn3lpH/k2D
 X32Q9hz/6sXKzIAD1Y0jv8ll28D5S7d2FgaWufy1tpB+CMb0Mp0RQn+Ho8lNMh70
 Zh9SF8RvknAiCT9iHeVIdbJxoYEtMuCaDwScliukVcg12gVViY5VzXMbSV/4jCnZ
 bAVZDpcM3LVLxCGbWqCNxjQ9wle99LsVHRld/KDpOfI6VIYDb8Y900Nf6efkQkAs
 a6z6rhpVdDg=
 =8FmM
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new device support, features and cleanups for IIO in the 5.6 cycle

New device support

* ad7091r5 ADC
  - New driver with follow up patch adding scale and vref support.
  - DT bindings
* ad7923
  - Support for ad7908, ad7918 and ad7928 added to driver.
* bma180
  - Support the BMA254 accelerometer. Required fairly substantial rework
    to allow for small differences between this an existing parts.
* bma400 accelerometer
  - New driver with follow up patch for regulator support.
  - DT bindings.
* asc dlhl60d
  - New driver support this range of pressure and temperature sensors.
  - DT bindings.
* ltc2496 ADC
  - New driver to support this ADC.
  - Split the existing LTC2497 driver generic component out and reuse.
  - DT bindings.
* parallax ping
  - New driver supporting ultrasonic and laser tof distance sensors.
  - Bindings for these sensors.

New features

* core
  - New char type for read_raw returns, used for thermocouple types.
  - Rename read_first_n callback to read.   The reasons behind the original
    naming are lost to the mists of time.
* ad799x
  - Allow pm_ops to disable device completely allowing regulator power down.
* bma180
  - Enable basic regulator support.
* dmaengine buffer
  - Report platform data alignment requirements via new ABI.
* max31856
  - Add option to set mains filter rejection frequency and document
    new in_temp_filter_notch_center_frequency ABI.
  - Add support for configuring HW averaging (oversampling ratio)
  - Add runtime configuration of thermocouple type and document new ABI.
* maxim-thermocouple
  - Add read only access to thermocouple type using new ABI, includes
    adding more specific compatibles to reflect which variant of the
    chip is being used.
* mpu6050
  - Provide option to support the PMU9150 in package magnetometer directly
    rather than via auxiliary bus.
* stm32_adc
  - Add overrun interrupt checks to detect if this happens.
* st_lsm6dsx
  - Enable the sensor-hub support for lsm6dsm. Includes various reworks to
    allow this.

Cleanups and minor fixes

* Subsystem wide
  - Tidy up indentation in Kconfig and fix alphabetical order of AD7091R5.
  - Drop linux/gpio.h and linux/of_gpio.h from drivers that don't use them.
* ad7266
  - Convert to GPIO descriptors.
* ad7303
  - Avoid a dance with checking if the regulator is supplied by just
    using the optional request interface.
* ad7887
  - Simplify channel specification assignment to enable adding more devices.
* ad7923
  - Drop some unused and largely pointless defines of BOB_N==N variety.
  - Tidy up checkpatch warnings.
  - Add missing of_device_id table.
* adf4350
  - Convert to GPIO descriptors.
* ak8975
  - Convert to GPIO descriptors.
* ADIS library and drivers
  - Expand scope of txrx_lock to cover all state and rename as state_lock
  - Add unlocked read / write to allow grouping of consecutive calls under
    single lock / unlock.
  - Add unlocked check_status, reset to allow grouping under single
    lock / unlock.
  - Remove remaining uses of core mlock for local state protection.
    mlock should never be used directly as it protects tightly defined
    core IIO device management state.
* adis16240
  - Enforce only supported SPI mode on driver load + add DT binding doc.
* atlas-ph-sensor
  - Rename to atlas-sensor given it now covers things beyond ph sensors.
* bma180
  - Use local dev variable to tidy up code.
  - Use c99 style explicity .member assignment to make driver more readable.
* bmp280
  - Drop ACPI support. No evidence this was used and appropriate ID is not
    registered.
  - Allow ACPI to bind device via PRP0001
* dmaengine buffer
  - Use dma_request_chan instead of dma_request_slave_channel_reason as that
    ABI is going away.
  - Add module info to avoid tainting the kernel.
* hts221
  - Avoid magic number defines when only used to fill structure elements
    that are self describing.
* lm3533
  - Drop a stray semicolon.
* max9611
  - Cleanup enum handling to be more resilient to future changes.
* mpu6050
  - Delete MPU9150 from supported SPI devices as doesn't provide SPI.
  - Select I2C_MUX again after kbuild issue fixed elsewhere.
* stm32-timer
  - Drop an unnecessary register update.
* ssp_sensors
  - Convert to GPIO descriptors.
* st_sensors
  - drop !CONFIG_ACPI defines as ACPI_PTR() will stop them being used
    anyway.
  - Make default platform data structures __maybe_unsued.
  - Fill in some missing kernel-doc function parameters.
* st_lsm6dsx
  - white space fixes.
  - Mark some constants that aren't always used as __maybe_unused.
  - Drop of ID table guards as they just pervent use under ACPI.
  - Switch to device properties to allow ACPI usage.
* st_uvis25
  - Drop acpi.h include as no ACPI APIs used.
* ti-ads1015
  - Drop legacy platform data as no one seems to be using it.
  - Use the device property API instead of OF specific.
* ti-ads7950
  - typo fix in error message.

* tag 'iio-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (99 commits)
  iio: accel: bma180: BMA254 support
  iio: pressure: bmp280: Allow device to be enumerated from ACPI
  iio: pressure: bmp280: Drop ACPI support
  dt-bindings: iio: adc: convert sd modulator to json-schema
  iio: buffer: rename 'read_first_n' callback to 'read'
  iio: buffer-dmaengine: Report buffer length requirements
  bindings: iio: pressure: Add documentation for dlh driver
  dt-bindings: Add asc vendor
  iio: pressure: Add driver for DLH pressure sensors
  iio: buffer-dmaengine: Add module information
  iio: accel: bma180: Use explicit member assignment
  iio: accel: bma180: Basic regulator support
  iio: accel: bma180: Add dev helper variable
  iio: imu: st_lsm6dsx: enable sensor-hub support for lsm6dsm
  iio: imu: st_lsm6dsx: rename st_lsm6dsx_shub_read_reg in st_lsm6dsx_shub_read_output
  iio: imu: st_lsm6dsx: check if shub_output reg is located in primary page
  iio: imu: st_lsm6dsx: check if pull_up is located in primary page
  iio: imu: st_lsm6dsx: check if master_enable is located in primary page
  iio: imu: st_lsm6dsx: export max num of slave devices in st_lsm6dsx_shub_settings
  iio: light: remove unneeded semicolon
  ...
 2020-01-10 10:44:00 +01:00
Mat Martineau 3ee17bc78e mptcp: Add MPTCP to skb extensions 
Add enum value for MPTCP and update config dependencies

v5 -> v6:
 - fixed '__unused' field size

Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2020-01-09 18:41:41 -08:00
David S. Miller a2d6d7ae59 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 
The ungrafting from PRIO bug fixes in net, when merged into net-next,
merge cleanly but create a build failure.  The resolution used here is
from Petr Machata.

Signed-off-by: David S. Miller <davem@davemloft.net>
 2020-01-09 12:13:43 -08:00
Linus Torvalds a5f48c7878 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 
Pull networking fixes from David Miller:

 1) Missing netns pointer init in arp_tables, from Florian Westphal.

 2) Fix normal tcp SACK being treated as D-SACK, from Pengcheng Yang.

 3) Fix divide by zero in sch_cake, from Wen Yang.

 4) Len passed to skb_put_padto() is wrong in qrtr code, from Carl
    Huang.

 5) cmd->obj.chunk is leaked in sctp code error paths, from Xin Long.

 6) cgroup bpf programs can be released out of order, fix from Roman
    Gushchin.

 7) Make sure stmmac debugfs entry name is changed when device name
    changes, from Jiping Ma.

 8) Fix memory leak in vlan_dev_set_egress_priority(), from Eric
    Dumazet.

 9) SKB leak in lan78xx usb driver, also from Eric Dumazet.

10) Ridiculous TCA_FQ_QUANTUM values configured can cause loops in fq
    packet scheduler, reject them. From Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
  tipc: fix wrong connect() return code
  tipc: fix link overflow issue at socket shutdown
  netfilter: ipset: avoid null deref when IPSET_ATTR_LINENO is present
  netfilter: conntrack: dccp, sctp: handle null timeout argument
  atm: eni: fix uninitialized variable warning
  macvlan: do not assume mac_header is set in macvlan_broadcast()
  net: sch_prio: When ungrafting, replace with FIFO
  mlxsw: spectrum_qdisc: Ignore grafting of invisible FIFO
  MAINTAINERS: Remove myself as co-maintainer for qcom-ethqos
  gtp: fix bad unlock balance in gtp_encap_enable_socket
  pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM
  tipc: remove meaningless assignment in Makefile
  tipc: do not add socket.o to tipc-y twice
  net: stmmac: dwmac-sun8i: Allow all RGMII modes
  net: stmmac: dwmac-sunxi: Allow all RGMII modes
  net: usb: lan78xx: fix possible skb leak
  net: stmmac: Fixed link does not need MDIO Bus
  vlan: vlan_changelink() should propagate errors
  vlan: fix memory leak in vlan_dev_set_egress_priority
  stmmac: debugfs entry name is not be changed when udev rename device name.
  ...
 2020-01-09 10:34:07 -08:00
James Hogan 9c48c48cd4
MAINTAINERS: Drop James Hogan as MIPS maintainer 
I haven't been active for 18 months, and Paul seems to be doing a grand
job, so drop me from MIPS maintainership.

Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Paul Burton <paulburton@kernel.org>
 2020-01-09 09:37:56 -08:00
Helen Koike 2a0a0bc702 media: MAINTAINERS: add entry for Rockchip ISP1 driver 
Add MAINTAINERS entry for the rockchip isp1 driver.

Signed-off-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
 2020-01-09 16:45:01 +01:00
Linus Walleij 8152c2bfd7 drm/panel: Add driver for Sony ACX424AKP panel 
The Sony ACX424AKP is a command/videomode DSI panel for
mobile devices. It is used on the ST-Ericsson HREF520
reference design. We support video mode by default, but
it is possible to switch the panel into command mode
by using the bool property "dsi-command-mode".

Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109072815.334867-1-linus.walleij@linaro.org
 2020-01-09 15:12:12 +01:00
Gary R Hook e91e785e18 crypto: ccp - Update MAINTAINERS for CCP driver 
Remove Gary R Hook as CCP maintainer.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
 2020-01-09 11:30:53 +08:00
Niklas Cassel cb6f74a1ea MAINTAINERS: Remove myself as co-maintainer for qcom-ethqos 
As I am no longer with Linaro, I no longer have access to documentation
for this IP. The Linaro email will start bouncing soon.

Vinod is fully capable to maintain this driver by himself, therefore
remove myself as co-maintainer for qcom-ethqos.

Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2020-01-08 12:44:21 -08:00
Olof Johansson 40a9012a3b Initial support for hierarchical CPU arrangement, managed by PSCI and its 
corresponding cpuidle driver. This support is based upon using the generic
 PM domain, which already supports devices belonging to CPUs.
 
 Finally, these is a DTS patch that enables the hierarchical topology to be
 used for the Qcom 410c Dragonboard, which supports the PSCI OS-initiated
 mode.
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAl4OEkgXHHVsZi5oYW5z
 c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCmEZw//Zr7kQS4NMBZjtLtKxLofvzXz
 rtdNV3aO6xkDeU3qlaZzz8gFpsO6U5Ohg2LjQFDSAv+kDAHY8ll2Ivl20n56adWT
 CXUjBriID1MDWgDe3F1wDTcgAoilpgI36yAKsZsZaSg5hYg01ooVnwEctQj+IWT/
 9CzoOghTeDFxL1LoeCMCs6VZ9+qU4sPDcCwKB22YOirDGIlCpNmMt8FPcyN0Qxr6
 XfRPlzSUXDKPVS4Uf4BJanQdd4fc2hSXTGf9ha6yByEtft8yb96ZyuJFhzEa91Fq
 zM9UXkoL2hxHm8y9jMqrrOsg61+bOLNP73GToQMrLHUJTU970XNvOM+yWVAUshCH
 KwfAwPMOTmwC61sGb8WyO7cnuul4sxsGKMGRjGcY/SvTCqB/hZcIke+AJH97zzC6
 XcB/vt42cKFzATG0WHpmMcJ6v0ahpAVfDYcXvao+v86EvZTzZD8DBHQC/iWOysC/
 XK+BUi7NTas2x3CC8cktFgHgU5kPdQG6Mu6mZe6fjGDMGrwMO0+eoFVwIbAYcCLJ
 MEDvKepPhpYpqPQCz9bTxnGoTrv00r58UYwXukR5ohTEt+j+GaFH9FD++x53cBGZ
 kQPkTJwZDh6Ozc98Ii9uEjXHSc4uq9aYURrrr8Qjs4/uAKRve2iyeKmFjnsJJt1f
 WiAO6lSo2C546AV+ZEI=
 =WFox
 -----END PGP SIGNATURE-----

Merge tag 'cpuidle_psci-v5.5-rc4' of git://git.linaro.org/people/ulf.hansson/linux-pm into arm/drivers

Initial support for hierarchical CPU arrangement, managed by PSCI and its
corresponding cpuidle driver. This support is based upon using the generic
PM domain, which already supports devices belonging to CPUs.

Finally, these is a DTS patch that enables the hierarchical topology to be
used for the Qcom 410c Dragonboard, which supports the PSCI OS-initiated
mode.

* tag 'cpuidle_psci-v5.5-rc4' of git://git.linaro.org/people/ulf.hansson/linux-pm: (611 commits)
  arm64: dts: Convert to the hierarchical CPU topology layout for MSM8916
  cpuidle: psci: Add support for PM domains by using genpd
  PM / Domains: Introduce a genpd OF helper that removes a subdomain
  cpuidle: psci: Support CPU hotplug for the hierarchical model
  cpuidle: psci: Manage runtime PM in the idle path
  cpuidle: psci: Prepare to use OS initiated suspend mode via PM domains
  cpuidle: psci: Attach CPU devices to their PM domains
  cpuidle: psci: Add a helper to attach a CPU to its PM domain
  cpuidle: psci: Support hierarchical CPU idle states
  cpuidle: psci: Simplify OF parsing of CPU idle state nodes
  cpuidle: dt: Support hierarchical CPU idle states
  of: base: Add of_get_cpu_state_node() to get idle states for a CPU node
  firmware: psci: Export functions to manage the OSI mode
  dt: psci: Update DT bindings to support hierarchical PSCI states
  cpuidle: psci: Align psci_power_state count with idle state count
  Linux 5.5-rc4
  locks: print unsigned ino in /proc/locks
  riscv: export flush_icache_all to modules
  riscv: reject invalid syscalls below -1
  riscv: fix compile failure with EXPORT_SYMBOL() & !MMU
  ...

Link: https://lore.kernel.org/r/20200102160820.3572-1-ulf.hansson@linaro.org
Signed-off-by: Olof Johansson <olof@lixom.net>
 2020-01-08 10:26:29 -08:00
Saravanan Sekar c5bae95b4e
MAINTAINERS: Add entry for mpq7920 PMIC driver 
Add MAINTAINERS entry for Monolithic Power Systems mpq7920 PMIC driver.

Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Link: https://lore.kernel.org/r/20200108131234.24128-5-sravanhome@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
 2020-01-08 15:57:31 +00:00
Mika Westerberg 7dad8e6f04 MAINTAINERS: Use linux-usb mailing list for Thunderbolt and USB4 patches 
Now that Thunderbolt public specification is called USB4 and is coming
from USB IF it makes sense to use linux-usb as mailing list for patches
touching this driver.

Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20200108125317.36444-3-mika.westerberg@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2020-01-08 16:55:42 +01:00
Mauro Carvalho Chehab 8821e92879 Linux 5.5-rc5 
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl4SYegeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG4m4H+QGCUN8SXN+2B+0/
 BfzOf7PFoKzAx3NwDbJQIZqhSl+Zfa4n3VGPEF8sXsvoQgdYvuJnS/5JiAZ9iRIH
 HAfFzegzQ3mCl8Du+SqCvQKs2Jt4OMCX62KGRebRBhpoKfZdwmN7n7pn9lWO771K
 9rxTpeItXhmK46jOFRbi5oyQfmkfSfyUN1b9CB53FXFS+ZDkDNA7QQiIYnKOD7SZ
 RrL7czhZ580QOC61qOlnz1GIhRzvU5SXg4OtuI3YfoOJRY5FKC3YtOgLReT0vPs+
 vEhAyP93upVXIhqm10WHNjd4t4a45Vy5ff64uFsQ9QV4nnqsC2C70YwWbVDdtz/W
 Lm0mvE8=
 =NECs
 -----END PGP SIGNATURE-----

Merge tag 'v5.5-rc5' into patchwork

Linux 5.5-rc5

* tag 'v5.5-rc5': (1006 commits)
  Linux 5.5-rc5
  Documentation: riscv: add patch acceptance guidelines
  riscv: prefix IRQ_ macro names with an RV_ namespace
  clocksource: riscv: add notrace to riscv_sched_clock
  apparmor: fix aa_xattrs_match() may sleep while holding a RCU lock
  hexagon: define ioremap_uc
  ocfs2: fix the crash due to call ocfs2_get_dlm_debug once less
  ocfs2: call journal flush to mark journal as empty after journal recovery when mount
  mm/hugetlb: defer freeing of huge pages if in non-task context
  mm/gup: fix memory leak in __gup_benchmark_ioctl
  mm/oom: fix pgtables units mismatch in Killed process message
  fs/posix_acl.c: fix kernel-doc warnings
  hexagon: work around compiler crash
  hexagon: parenthesize registers in asm predicates
  fs/namespace.c: make to_mnt_ns() static
  fs/nsfs.c: include headers for missing declarations
  fs/direct-io.c: include fs/internal.h for missing prototype
  mm: move_pages: return valid node id in status if the page is already on the target node
  memcg: account security cred as well to kmemcg
  kcov: fix struct layout for kcov_remote_arg
  ...
 2020-01-08 11:13:25 +01:00
Jose Abreu 1501125460 MAINTAINERS: Add stmmac Ethernet driver documentation entry 
Add the missing entry for the file that documents the stmicro Ethernet
driver stmmac.

Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2020-01-07 13:38:56 -08:00
Paul Moore 89b223bfb8 selinux: deprecate disabling SELinux and runtime 
Deprecate the CONFIG_SECURITY_SELINUX_DISABLE functionality.  The
code was originally developed to make it easier for Linux
distributions to support architectures where adding parameters to the
kernel command line was difficult.  Unfortunately, supporting runtime
disable meant we had to make some security trade-offs when it came to
the LSM hooks, as documented in the Kconfig help text:

  NOTE: selecting this option will disable the '__ro_after_init'
  kernel hardening feature for security hooks.   Please consider
  using the selinux=0 boot parameter instead of enabling this
  option.

Fortunately it looks as if that the original motivation for the
runtime disable functionality is gone, and Fedora/RHEL appears to be
the only major distribution enabling this capability at build time
so we are now taking steps to remove it entirely from the kernel.
The first step is to mark the functionality as deprecated and print
an error when it is used (what this patch is doing).  As Fedora/RHEL
makes progress in transitioning the distribution away from runtime
disable, we will introduce follow-up patches over several kernel
releases which will block for increasing periods of time when the
runtime disable is used.  Finally we will remove the option entirely
once we believe all users have moved to the kernel cmdline approach.

Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
 2020-01-07 10:19:43 -05:00
Olof Johansson 4081b33559 Merge branch 'mmp/hsic' into arm/dt 
* mmp/hsic:
  ARM: dts: mmp3-dell-ariel: Enable the HSIC
  ARM: dts: mmp3: Add HSIC controllers
  dt-bindings: phy: Add binding for marvell,mmp3-hsic-phy
  clk: mmp2: Add HSIC clocks
  dt-bindings: marvell,mmp2: Add clock ids for the HSIC clocks
  + Linux 5.5-rc2
 2020-01-06 09:33:53 -08:00
Olof Johansson 965af1cfbb ARM SCMI updates for v5.6 
1. Addition of multiple device support per protocol to enable use of
    some procotols by multiple kernel subsystems simultaneously and
    corresponding updates to the existing scmi drivers
 2. Addition of trace events around the scmi transfer code to measure
    any delays and capture anomalies that can also be used during
    investigation of some platform firmware related issues
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEunHlEgbzHrJD3ZPhAEG6vDF+4pgFAl4J8IgACgkQAEG6vDF+
 4pipkxAAj2Unbr9epBk08ffLZ9GXCNzCbzOcEoxKCYY1qBnmX04EROj3Ke29lDEj
 ai9JeXRAQWbzO4VjopwgNSmNU0rQxpp0dJ/1GHWbL87dDFz40Qppm6d0PwwowCnX
 LI1gTvvDC7SPq0ev4x7iW/E4smyQsRkDS/nAuF4dgTxvk0TMxo70M2r6lRtnjnlW
 nTtOwOYXrorJ+a70oz9VwV+UAI/b9F+HGtCFTifQgwWrLSGBacrIAUswD2WOve4l
 aVK6jHtiC6VXR1Uomllps8lGXF0GjAr/OwBvIMsortT7kIulpYw5S4GHzEs8AHJX
 olpxxNtJHSMuWIkPjUUxHSJKILS9eKCiDntQJw1o9buv/Vx2YBwlqoJEx5Wlof6O
 LzRlCJtHh0YlfZ7I0SClQYcyDGesJifoY24uGExr74AfsAIR8R6zhIlKQUtme5DJ
 baQvFDFEkf70ii8xutOEOXTENi+9851XN+MB0P2qT7LOxGTo1pJS1XGk3o0bBDu7
 Hz8B18ClwRm3Wj51Ttn4aUOOS6sM6+EnhBJ9sSJMDjLw0E4vAA0/JmsNm9OlMXkQ
 rm2oYYuaqO+DOMj26LrePWWq29hQp+pSJredFeZk9YS6heU0/chxQUMHOVbKoRqe
 sTuJi3R2Lu94NXOUumRSvMLT9TDfCIoqlWW/PfwZq2PJl12CZe8=
 =2CXP
 -----END PGP SIGNATURE-----

Merge tag 'scmi-updates-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers

ARM SCMI updates for v5.6

1. Addition of multiple device support per protocol to enable use of
   some procotols by multiple kernel subsystems simultaneously and
   corresponding updates to the existing scmi drivers
2. Addition of trace events around the scmi transfer code to measure
   any delays and capture anomalies that can also be used during
   investigation of some platform firmware related issues

* tag 'scmi-updates-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  drivers: firmware: scmi: Extend SCMI transport layer by trace events
  include: trace: Add SCMI header with trace events
  reset: reset-scmi: Match scmi device by both name and protocol id
  hwmon: (scmi-hwmon) Match scmi device by both name and protocol id
  cpufreq: scmi: Match scmi device by both name and protocol id
  clk: scmi: Match scmi device by both name and protocol id
  firmware: arm_scmi: Skip protocol initialisation for additional devices
  firmware: arm_scmi: Stash version in protocol init functions
  firmware: arm_scmi: Match scmi device by both name and protocol id
  firmware: arm_scmi: Add versions and identifier attributes using dev_groups
  firmware: arm_scmi: Add names to scmi devices created
  firmware: arm_scmi: Skip scmi mbox channel setup for addtional devices
  firmware: arm_scmi: Add support for multiple device per protocol

Link: https://lore.kernel.org/r/20191230182956.GA29349@bogus
Signed-off-by: Olof Johansson <olof@lixom.net>
 2020-01-06 09:23:06 -08:00
Krzysztof Kozlowski 15a821f050 MAINTAINERS: Drop obsolete entries from Samsung sxgbe ethernet driver 
The emails to ks.giri@samsung.com and vipul.pandya@samsung.com bounce
with 550 error code:

    host mailin.samsung.com[203.254.224.12] said: 550
    5.1.1 Recipient address rejected: User unknown (in reply to RCPT TO
    command)"

Drop Girish K S and Vipul Pandya from sxgbe maintainers entry.

Cc: Byungho An <bh74.an@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2020-01-05 14:49:31 -08:00
Linus Torvalds 768fc661d1 RISC-V updates for v5.5-rc5 
Several fixes for RISC-V:
 
 - Fix function graph trace support
 
 - Prefix the CSR IRQ_* macro names with "RV_", to avoid collisions
   with macros elsewhere in the Linux kernel tree named "IRQ_TIMER"
 
 - Use __pa_symbol() when computing the physical address of a kernel
   symbol, rather than __pa()
 
 - Mark the RISC-V port as supporting GCOV
 
 One DT addition:
 
 - Describe the L2 cache controller in the FU540 DT file
 
 One documentation update:
 
 - Add patch acceptance guideline documentation
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEElRDoIDdEz9/svf2Kx4+xDQu9KksFAl4Re3wACgkQx4+xDQu9
 KkvPNA/6AmDvw90JX1Xm6jK2J/eYaUr29dJZ7KYdQ7HhbsixkJecTqjW3huyWfv6
 ynsqWA0e87iSGyV+zBshw6nxVyGgDZgRam5100eiP25ZiTR5cbR8e6JmVVplGdkH
 VOONhAM64Pknoy+lCL0emP01+qa27PqTCQomxDDIxgrpfgbR9PPjgpuA7B0gCOz1
 yhc6EjfbSRKLJjnowoSdvHcDvzU0oIPjMPxQz1gUmBmUKRp5Idn/xTtWG9p/M5T8
 6XPzh8hEfbgvi0ur0Dlz9hav2g5mSL2S5n4CPitAAOyrG/jDktlQgYcs7nSTAk7m
 vtU6oUZTMJ9nmMyPQspI+krW2Q4g5BUUVRwm3ckNe6sqwrs8TlXIeTQb8Yb+B4Xm
 3EaS5YvfMNoHjlHQZ814EPAFNEqROgI04O2Sl97+gqEpQUwC9qLSeXiVQHgxcW9/
 8UqlbY/9XvKnZq6btGAJElXAirbt5j+TWKCULyUKLu8mz3644ascIr2sBOkMSb61
 ZRZbxEbK8Avwf2etv7hap1Gd2j+ywlK0IziKOsAPBr0Pif0lAdawf1PjH491spVc
 //re3g/rZu3I2+NK4qKNCoxZwzT5w/kK8rKJJ7sw8KVB2kTVjV7Qrmktt5Zeh021
 PXPT/tUgLMvZW6RRCqPCXZru28qJxlLAhuQEtHC/KbSYcm2sSJc=
 =8HSd
 -----END PGP SIGNATURE-----

Merge tag 'riscv/for-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V fixes from Paul Walmsley:
 "Several fixes for RISC-V:

   - Fix function graph trace support

   - Prefix the CSR IRQ_* macro names with "RV_", to avoid collisions
     with macros elsewhere in the Linux kernel tree named "IRQ_TIMER"

   - Use __pa_symbol() when computing the physical address of a kernel
     symbol, rather than __pa()

   - Mark the RISC-V port as supporting GCOV

  One DT addition:

   - Describe the L2 cache controller in the FU540 DT file

  One documentation update:

   - Add patch acceptance guideline documentation"

* tag 'riscv/for-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  Documentation: riscv: add patch acceptance guidelines
  riscv: prefix IRQ_ macro names with an RV_ namespace
  clocksource: riscv: add notrace to riscv_sched_clock
  riscv: ftrace: correct the condition logic in function graph tracer
  riscv: dts: Add DT support for SiFive L2 cache controller
  riscv: gcov: enable gcov for RISC-V
  riscv: mm: use __pa_symbol for kernel symbols
 2020-01-05 11:15:31 -08:00
Paul Walmsley 0e194d9da1 Documentation: riscv: add patch acceptance guidelines 
Formalize, in kernel documentation, the patch acceptance policy for
arch/riscv.  In summary, it states that as maintainers, we plan to
only accept patches for new modules or extensions that have been
frozen or ratified by the RISC-V Foundation.

We've been following these guidelines for the past few months.  In the
meantime, we've received quite a bit of feedback that it would be
helpful to have these guidelines formally documented.

Based on a suggestion from Matthew Wilcox, we also add a link to this
file to Documentation/process/index.rst, to make this document easier
to find.  The format of this document has also been changed to align
to the format outlined in the maintainer entry profiles, in accordance
with comments from Jon Corbet and Dan Williams.

Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Krste Asanovic <krste@berkeley.edu>
Cc: Andrew Waterman <waterman@eecs.berkeley.edu>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
 2020-01-04 21:49:01 -08:00
James Hogan 31f715dd48 media: MAINTAINERS: Orphan img-ir driver 
I haven't been active for 18 months, and don't have the hardware set up
to test the img-ir driver, so mark it as orphaned and remove myself as
maintainer.

I used to test this driver using a Minimorph board with Meta based
TZ1090 SoC, but the Meta arch port is long gone from the kernel. The
only remaining platform in-tree using this driver is the Imagination
Pistachio SoC, and the only Pistachio based board with DTS in-tree (MIPS
Creator Ci40) doesn't bring the IR out.

However I presume the IP persists under the guardianship of Sondrel, and
its possible current & future SoCs/boards may continue to use this IP.

Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: James Hartley <james.hartley@sondrel.com>
Cc: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
 2020-01-03 16:28:04 +01:00
David S. Miller cd82dbf0d3 net: Update GIT url in maintainers. 
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2020-01-02 17:45:34 -08:00
David S. Miller 31d518f35e Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 
Simple overlapping changes in bpf land wrt. bpf_helper_defs.h
handling.

Signed-off-by: David S. Miller <davem@davemloft.net>
 2019-12-31 13:37:13 -08:00
Linus Torvalds 738d290277 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 
Pull networking fixes from David Miller:

 1) Fix big endian overflow in nf_flow_table, from Arnd Bergmann.

 2) Fix port selection on big endian in nft_tproxy, from Phil Sutter.

 3) Fix precision tracking for unbound scalars in bpf verifier, from
    Daniel Borkmann.

 4) Fix integer overflow in socket rcvbuf check in UDP, from Antonio
    Messina.

 5) Do not perform a neigh confirmation during a pmtu update over a
    tunnel, from Hangbin Liu.

 6) Fix DMA mapping leak in dpaa_eth driver, from Madalin Bucur.

 7) Various PTP fixes for sja1105 dsa driver, from Vladimir Oltean.

 8) Add missing to dummy definition of of_mdiobus_child_is_phy(), from
    Geert Uytterhoeven

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
  hsr: fix slab-out-of-bounds Read in hsr_debugfs_rename()
  net/sched: add delete_empty() to filters and use it in cls_flower
  tcp: Fix highest_sack and highest_sack_seq
  ptp: fix the race between the release of ptp_clock and cdev
  net: dsa: sja1105: Reconcile the meaning of TPID and TPID2 for E/T and P/Q/R/S
  Documentation: net: dsa: sja1105: Remove text about taprio base-time limitation
  net: dsa: sja1105: Remove restriction of zero base-time for taprio offload
  net: dsa: sja1105: Really make the PTP command read-write
  net: dsa: sja1105: Take PTP egress timestamp by port, not mgmt slot
  cxgb4/cxgb4vf: fix flow control display for auto negotiation
  mlxsw: spectrum: Use dedicated policer for VRRP packets
  mlxsw: spectrum_router: Skip loopback RIFs during MAC validation
  net: stmmac: dwmac-meson8b: Fix the RGMII TX delay on Meson8b/8m2 SoCs
  net/sched: act_mirred: Pull mac prior redir to non mac_header_xmit device
  net_sched: sch_fq: properly set sk->sk_pacing_status
  bnx2x: Fix accounting of vlan resources among the PFs
  bnx2x: Use appropriate define for vlan credit
  of: mdio: Add missing inline to of_mdiobus_child_is_phy() dummy
  net: phy: aquantia: add suspend / resume ops for AQR105
  dpaa_eth: fix DMA mapping leak
  ...
 2019-12-31 11:14:58 -08:00
Lukasz Luba 257d0e20ec include: trace: Add SCMI header with trace events 
Adding trace events would help to measure the speed of the communication
channel. It can be also potentially used helpful during investigation
of some issues platforms which use different transport layer.

Update also MAINTAINERS file with information that the new trace events
are maintained.

Suggested-by: Jim Quinlan <james.quinlan@broadcom.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
 2019-12-30 12:34:29 +00:00