misspelled words for check:-
chcek
chck
cehck
I myself did these spell mistakes in changelog for patches, Thus
suggesting to add in spelling.txt, so that checkpatch.pl warns it
earlier. References:-
./arch/powerpc/kernel/exceptions-64e.S:456: . . . make sure you chcek
https://lkml.org/lkml/2015/6/25/289
./arch/x86/mm/pageattr.c:1368: * No need to cehck in that case
[akpm@linux-foundation.org: add whcih->which, whcih I always get wrong]
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We cannot detect clang before including the arch Makefile, because that
can set the default cross compiler. We also cannot detect clang after
including the arch Makefile, because powerpc wants to know about clang.
Solve this by using an deferred variable. This costs us a few shell
invocations, but this is only a constant number.
Reported-by: Behan Webster <behanw@converseincode.com>
Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
Make deb-pkg build both source and binary package like make rpm-pkg does.
For people who only need binary kernel package, there is now bindeb-pkg
target, same target also used to build the .deb files if built from the
source package using dpkg-buildpackage.
Generated source package will build the same kernel .config than what
was available for make deb-pkg. The name of the source package can
be set with KDEB_SOURCENAME enviroment variable.
The source package is useful for GPL compliance, or for feeding to a
automated debian package builder.
Cc: Chris J Arges <chris.j.arges@canonical.com>
Reviewed-by: maximilian attems <maks@stro.at>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
Split source tarball creation from rpm-pkg target
so it can be used from deb-pkg target as well. As
added bonus, we can now pretty print TAR the name of
tarball created in quiet mode
This patch prepares the groundwork for deb-pkg source
package adding bit.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
Pull locking and atomic updates from Ingo Molnar:
"Main changes in this cycle are:
- Extend atomic primitives with coherent logic op primitives
(atomic_{or,and,xor}()) and deprecate the old partial APIs
(atomic_{set,clear}_mask())
The old ops were incoherent with incompatible signatures across
architectures and with incomplete support. Now every architecture
supports the primitives consistently (by Peter Zijlstra)
- Generic support for 'relaxed atomics':
- _acquire/release/relaxed() flavours of xchg(), cmpxchg() and {add,sub}_return()
- atomic_read_acquire()
- atomic_set_release()
This came out of porting qwrlock code to arm64 (by Will Deacon)
- Clean up the fragile static_key APIs that were causing repeat bugs,
by introducing a new one:
DEFINE_STATIC_KEY_TRUE(name);
DEFINE_STATIC_KEY_FALSE(name);
which define a key of different types with an initial true/false
value.
Then allow:
static_branch_likely()
static_branch_unlikely()
to take a key of either type and emit the right instruction for the
case. To be able to know the 'type' of the static key we encode it
in the jump entry (by Peter Zijlstra)
- Static key self-tests (by Jason Baron)
- qrwlock optimizations (by Waiman Long)
- small futex enhancements (by Davidlohr Bueso)
- ... and misc other changes"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits)
jump_label/x86: Work around asm build bug on older/backported GCCs
locking, ARM, atomics: Define our SMP atomics in terms of _relaxed() operations
locking, include/llist: Use linux/atomic.h instead of asm/cmpxchg.h
locking/qrwlock: Make use of _{acquire|release|relaxed}() atomics
locking/qrwlock: Implement queue_write_unlock() using smp_store_release()
locking/lockref: Remove homebrew cmpxchg64_relaxed() macro definition
locking, asm-generic: Add _{relaxed|acquire|release}() variants for 'atomic_long_t'
locking, asm-generic: Rework atomic-long.h to avoid bulk code duplication
locking/atomics: Add _{acquire|release|relaxed}() variants of some atomic operations
locking, compiler.h: Cast away attributes in the WRITE_ONCE() magic
locking/static_keys: Make verify_keys() static
jump label, locking/static_keys: Update docs
locking/static_keys: Provide a selftest
jump_label: Provide a self-test
s390/uaccess, locking/static_keys: employ static_branch_likely()
x86, tsc, locking/static_keys: Employ static_branch_likely()
locking/static_keys: Add selftest
locking/static_keys: Add a new static_key interface
locking/static_keys: Rework update logic
locking/static_keys: Add static_key_{en,dis}able() helpers
...
Pull RCU updates from Ingo Molnar:
"The main RCU changes in this cycle are:
- the combination of tree geometry-initialization simplifications and
OS-jitter-reduction changes to expedited grace periods. These two
are stacked due to the large number of conflicts that would
otherwise result.
- privatize smp_mb__after_unlock_lock().
This commit moves the definition of smp_mb__after_unlock_lock() to
kernel/rcu/tree.h, in recognition of the fact that RCU is the only
thing using this, that nothing else is likely to use it, and that
it is likely to go away completely.
- documentation updates.
- torture-test updates.
- misc fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
rcu,locking: Privatize smp_mb__after_unlock_lock()
rcu: Silence lockdep false positive for expedited grace periods
rcu: Don't disable CPU hotplug during OOM notifiers
scripts: Make checkpatch.pl warn on expedited RCU grace periods
rcu: Update MAINTAINERS entry
rcu: Clarify CONFIG_RCU_EQS_DEBUG help text
rcu: Fix backwards RCU_LOCKDEP_WARN() in synchronize_rcu_tasks()
rcu: Rename rcu_lockdep_assert() to RCU_LOCKDEP_WARN()
rcu: Make rcu_is_watching() really notrace
cpu: Wait for RCU grace periods concurrently
rcu: Create a synchronize_rcu_mult()
rcu: Fix obsolete priority-boosting comment
rcu: Use WRITE_ONCE in RCU_INIT_POINTER
rcu: Hide RCU_NOCB_CPU behind RCU_EXPERT
rcu: Add RCU-sched flavors of get-state and cond-sync
rcu: Add fastpath bypassing funnel locking
rcu: Rename RCU_GP_DONE_FQS to RCU_GP_DOING_FQS
rcu: Pull out wait_event*() condition into helper function
documentation: Describe new expedited stall warnings
rcu: Add stall warnings to synchronize_sched_expedited()
...
including:
- Support for reproducible document builds, from Ben Hutchings and
company.
- The ability to automatically generate cross-reference links within a
single DocBook book and embedded descriptions for large structures.
From Danilo Cesar Lemes de Paula.
- A new document on how to add a system call from David Drysdale.
- Chameleon bus documentation from Johannes Thumshirn.
...plus the usual collection of improvements, typo fixes, and more.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=pQ1H
-----END PGP SIGNATURE-----
Merge tag 'docs-for-linus' of git://git.lwn.net/linux-2.6
Pull documentation updates from Jonathan Corbet:
"There's been a fair amount going on in the docs tree this time around,
including:
- Support for reproducible document builds, from Ben Hutchings and
company.
- The ability to automatically generate cross-reference links within
a single DocBook book and embedded descriptions for large
structures. From Danilo Cesar Lemes de Paula.
- A new document on how to add a system call from David Drysdale.
- Chameleon bus documentation from Johannes Thumshirn.
...plus the usual collection of improvements, typo fixes, and more"
* tag 'docs-for-linus' of git://git.lwn.net/linux-2.6: (39 commits)
Documentation, add kernel-parameters.txt entry for dis_ucode_ldr
Documentation/x86: Rename IRQSTACKSIZE to IRQ_STACK_SIZE
Documentation/Intel-IOMMU.txt: Modify definition of DRHD
docs: update HOWTO for 3.x -> 4.x versioning
kernel-doc: ignore unneeded attribute information
scripts/kernel-doc: Adding cross-reference links to html documentation.
DocBook: Fix non-determinstic installation of duplicate man pages
Documentation: minor typo fix in mailbox.txt
Documentation: describe how to add a system call
doc: Add more workqueue functions to the documentation
ARM: keystone: add documentation for SoCs and EVMs
scripts/kernel-doc Allow struct arguments documentation in struct body
SubmittingPatches: remove stray quote character
Revert "DocBook: Avoid building man pages repeatedly and inconsistently"
Documentation: Minor changes to men-chameleon-bus.txt
Doc: fix trivial typo in SubmittingPatches
MAINTAINERS: Direct Documentation/DocBook/media properly
Documentation: installed man pages don't need to be executable
fix Evolution submenu name in email-clients.txt
Documentation: Add MCB documentation
...
Here's the "big" char/misc driver update for 4.3-rc1.
Not much really interesting here, just a number of little changes all
over the place, and some nice consolidation of the nvmem drivers to a
common framework. As usual, the mei drivers stand out as the largest
"churn" to handle new devices and features in their hardware.
All have been in linux-next for a while with no issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlXV844ACgkQMUfUDdst+ymYfQCgmDKjq3fsVHCxNZPxnukFYzvb
xZkAnRb8fuub5gVQFP29A+rhyiuWD13v
=Bq9K
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver patches from Greg KH:
"Here's the "big" char/misc driver update for 4.3-rc1.
Not much really interesting here, just a number of little changes all
over the place, and some nice consolidation of the nvmem drivers to a
common framework. As usual, the mei drivers stand out as the largest
"churn" to handle new devices and features in their hardware.
All have been in linux-next for a while with no issues"
* tag 'char-misc-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (136 commits)
auxdisplay: ks0108: initialize local parport variable
extcon: palmas: Fix build break due to devm_gpiod_get_optional API change
extcon: palmas: Support GPIO based USB ID detection
extcon: Fix signedness bugs about break error handling
extcon: Drop owner assignment from i2c_driver
extcon: arizona: Simplify pdata symantics for micd_dbtime
extcon: arizona: Declare 3-pole jack if we detect open circuit on mic
extcon: Add exception handling to prevent the NULL pointer access
extcon: arizona: Ensure variables are set for headphone detection
extcon: arizona: Use gpiod inteface to handle micd_pol_gpio gpio
extcon: arizona: Add basic microphone detection DT/ACPI bindings
extcon: arizona: Update to use the new device properties API
extcon: palmas: Remove the mutually_exclusive array
extcon: Remove optional print_state() function pointer of struct extcon_dev
extcon: Remove duplicate header file in extcon.h
extcon: max77843: Clear IRQ bits state before request IRQ
toshiba laptop: replace ioremap_cache with ioremap
misc: eeprom: max6875: clean up max6875_read()
misc: eeprom: clean up eeprom_read()
misc: eeprom: 93xx46: clean up eeprom_93xx46_bin_read/write
...
This adds a simple perl script for reading two files as produced by
the stackusage script and computing the changes in stack usage. For
example:
$ scripts/stackusage -o /tmp/old.su CC=gcc-4.7 -j8 fs/ext4/
$ scripts/stackusage -o /tmp/new.su CC=gcc-5.0 -j8 fs/ext4/
$ scripts/stackdelta /tmp/{old,new}.su | sort -k5,5g
shows that gcc 5.0 generally produces less stack-hungry code than gcc
4.7. Obviously, the script can also be used for measuring the effect
of commits, .config tweaks or whatnot.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Michal Marek <mmarek@suse.com>
The current checkstack.pl script has a few problems, stemming from the
overly simplistic attempt at parsing objdump output with regular
expressions: For example, on x86_64 it doesn't take the push
instruction into account, making it consistently underestimate the
real stack use, and it also doesn't capture stack pointer adjustments
of exactly 128 bytes [1].
Since newer gcc (>= 4.6) knows about -fstack-usage, we might as well
take the information straight from the horse's mouth. This patch
introduces scripts/stackusage, which is a simple wrapper for running
make with KCFLAGS set to -fstack-usage. Example use is
scripts/stackusage -o out.su -j8 lib/
The script understands "-o foo" for writing to 'foo' and -h for a
trivial help text; anything else is passed to make.
Afterwards, we find all newly created .su files, massage them a
little, sort by stack use and write the result to a single output
file.
Note that the function names printed by (at least) gcc 4.7 are
sometimes useless. For example, the first three lines of out.su
generated above are
./lib/decompress_bunzip2.c:155 get_next_block 448 static
./lib/decompress_unlzma.c:537 unlzma 336 static
./lib/vsprintf.c:616 8 304 static
That function '8' is really the static symbol_string(), but it has
been subject to 'interprocedural scalar replacement of aggregates', so
its name in the object file is 'symbol_string.isra.8'. gcc 5.0 doesn't
have this problem; it uses the full name as seen in the object file.
[1] Since gcc encodes that by
48 83 c4 80 add $0xffffffffffffff80,%rsp
and not
48 81 ec 80 00 00 00 sub $0x80,%rsp
since -128 fits in an imm8.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Michal Marek <mmarek@suse.com>
...so "git status" doesn't nag us about them.
Cc: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
This causes conflicts when using multiple kernels built
with this mechanism.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
The clear_config() is called just once at the beginning of this
program, but the global variable hashtab[] is already zero-filled
at the start-up.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
If the target string matches "CONFIG_", move the pointer p
forward. This saves several 7-chars adjustments.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
The kernel-doc script gets confused by __attribute__(()) strings in
structures, so just clean the out. Also ignore the CRYPTO_MINALIGN_ATTR
macro used in the crypto subsystem.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Rebuild the parser after commit 1c722503fa (genksyms: Duplicate
function pointer type definitions segfault), using bison 2.7.
Signed-off-by: Michal Marek <mmarek@suse.com>
I noticed that genksyms will segfault when it sees duplicate function
pointer type declaration when I placed the same function pointer
definition in two separate headers in a local branch as an intermediate
step of some refactoring. This can be reproduced by piping the following
minimal test case into `genksyms -r /dev/null` or alternatively, putting
it into a C file attempting a build:
typedef int (*f)();
typedef int (*f)();
Attaching gdb to genksyms to understand this failure is useless without
changing CFLAGS to emit debuginfo. Once you have debuginfo, you will
find that the failure is that `char *s` was NULL and the program
executed `while(*s)`. At which point, further debugging requires
familiarity with compiler front end / parser development.
What happens is that flex identifies the first instance of the token "f"
as IDENT and the yacc parser adds it to the symbol table. On the second
instance, flex will identify "f" as TYPE, which triggers an error case
in the yacc parser. Given that TYPE would have been IDENT had it not
been in the symbol table, the the segmentaion fault could be avoided by
treating TYPE as IDENT in the affected rule.
Some might consider placing identical function pointer type declarations
in different headers to be poor style might consider a failure to be
beneficial. However, failing through a segmentation fault makes the
cause non-obvious and can waste the time of anyone who encounters it.
Signed-off-by: Richard Yao <richard.yao@clusterhq.com>
Acked-by: Madhuri Yechuri <madhuriyechuri@clusterhq.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Certain platforms (e. g. BSD-based ones) define some ELF constants
according to host. This patch fixes problems with cross-building
Linux kernel on these platforms (e. g. building ARM 32-bit version
on x86-64 host).
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Add a check for the existence of input files and exit (with failure)
if they are missing.
Without this additional check, missing files produce error messages
but still result in an output file being generated and a successful
exit code.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
I happened to build a kernel with "make deb-pkg" on a machine with no
network connectivity, but this failed with:
[...]
INSTALL debian/headertmp/usr/include/asm/ (65 files)
hostname: Name or service not known
../scripts/package/Makefile:90: recipe for target 'deb-pkg' failed
make[2]: *** [deb-pkg] Error 1
In scripts/package/builddeb it tries to construct an email address (that
can be queried in /proc/version later on) but with no network,
the "hostname -f" fails. The following patch falls back to just use the
shortname if we cannot determine our FQDN.
Signed-off-by: Christian Kujau <lists@nerdbynature.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
i2c_add_driver (through i2c_register_driver) sets the owner field so we
can drop it also from i2c drivers, just like from platform drivers.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michal Marek <mmarek@suse.com>
Update the shipped files generated by flex and gperf to support the
explicit use of "---help---" and to emit warnings for unsupported
characters on COMMAND tokens.
As I could not find out which flex/gperf version was used to generate
the previous version, I used flex 2.5.35 and gperf 3.0.4 from
Ubuntu 14.04 - this also leads to the big number of changed lines
in this patch.
Signed-off-by: Andreas Ruprecht <andreas.ruprecht@fau.de>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
Tested-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
In Kconfig, definitions of options take the following form:
"<COMMAND> <PARAM> <PARAM> ...". COMMANDs and PARAMs are treated
slightly different by the underlying parser.
While commit 2e0d737fc7 ("kconfig: don't silently ignore unhandled
characters") introduced a warning for unsupported characters around
PARAMs, it does not cover situations where a COMMAND has additional
characters before it.
This change makes Kconfig emit a warning if superfluous characters
are found before COMMANDs. As the 'help' statement sometimes is
written as '---help---', the '-' character would now also be regarded
as unhandled and generate a warning. To avoid that, '-' is added to
the list of allowed characters, and the token '---help---' is included
in the zconf.gperf file.
Reported-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Andreas Ruprecht <andreas.ruprecht@fau.de>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
Tested-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
The sym_calc_value() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Michal Marek <mmarek@suse.com>
Every package needs /usr/share/doc/$package_name and
DEBIAN directory, so create them as part of create_package
function.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
Every tracepoint creates two functions, the usual one 'trace_*()'
and the rcuidle one 'trace_*_rcuidle()'. Add regex for the
rcuidle variant so that we can jump to the tracepoints that use
rcuidle.
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
Functions, Structs and Parameters definitions on kernel documentation
are pure cosmetic, it only highlights the element.
To ease the navigation in the documentation we should use <links> inside
those tags so readers can easily jump between methods directly.
This was discussed in 2014[1] and is implemented by getting a list
of <refentries> from the DocBook XML to generate a database. Then it looks
for <function>,<structnames> and <paramdef> tags that matches the ones in
the database. As it only links existent references, no broken links are
added.
[1] - lists.freedesktop.org/archives/dri-devel/2014-August/065404.html
Signed-off-by: Danilo Cesar Lemes de Paula <danilo.cesar@collabora.co.uk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Stephan Mueller <smueller@chronox.de>
Cc: Michal Marek <mmarek@suse.cz>
Cc: intel-gfx <intel-gfx@lists.freedesktop.org>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Since commit 1329e8cc69 ("modsign: Extract signing cert from
CONFIG_MODULE_SIG_KEY if needed"), the build system has carefully coped
with the signing key being specified as a relative path in either the
source or or the build trees.
However, the actual signing of modules has not worked if the filename
is relative to the source tree.
Fix that by moving the config_filename helper into scripts/Kbuild.include
so that it can be used from elsewhere, and then using it in the top-level
Makefile to find the signing key file.
Kill the intermediate $(MODPUBKEY) and $(MODSECKEY) variables too, while
we're at it. There's no need for them.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Fix the following warning:
scripts/sign-file.c: In function ‘main’:
scripts/sign-file.c:188: warning: value computed is not used
whereby the result of BIO_ctrl() is cast inside of BIO_reset() to an
integer of a different size - which we're not checking but probably should.
Reported-by: James Morris <jmorris@namei.org>
Signed-off-by: David Howells <dhowells@redhat.com>
A PKCS#7 or CMS message can have per-signature authenticated attributes
that are digested as a lump and signed by the authorising key for that
signature. If such attributes exist, the content digest isn't itself
signed, but rather it is included in a special authattr which then
contributes to the signature.
Further, we already require the master message content type to be
pkcs7_signedData - but there's also a separate content type for the data
itself within the SignedData object and this must be repeated inside the
authattrs for each signer [RFC2315 9.2, RFC5652 11.1].
We should really validate the authattrs if they exist or forbid them
entirely as appropriate. To this end:
(1) Alter the PKCS#7 parser to reject any message that has more than one
signature where at least one signature has authattrs and at least one
that does not.
(2) Validate authattrs if they are present and strongly restrict them.
Only the following authattrs are permitted and all others are
rejected:
(a) contentType. This is checked to be an OID that matches the
content type in the SignedData object.
(b) messageDigest. This must match the crypto digest of the data.
(c) signingTime. If present, we check that this is a valid, parseable
UTCTime or GeneralTime and that the date it encodes fits within
the validity window of the matching X.509 cert.
(d) S/MIME capabilities. We don't check the contents.
(e) Authenticode SP Opus Info. We don't check the contents.
(f) Authenticode Statement Type. We don't check the contents.
The message is rejected if (a) or (b) are missing. If the message is
an Authenticode type, the message is rejected if (e) is missing; if
not Authenticode, the message is rejected if (d) - (f) are present.
The S/MIME capabilities authattr (d) unfortunately has to be allowed
to support kernels already signed by the pesign program. This only
affects kexec. sign-file suppresses them (CMS_NOSMIMECAP).
The message is also rejected if an authattr is given more than once or
if it contains more than one element in its set of values.
(3) Add a parameter to pkcs7_verify() to select one of the following
restrictions and pass in the appropriate option from the callers:
(*) VERIFYING_MODULE_SIGNATURE
This requires that the SignedData content type be pkcs7-data and
forbids authattrs. sign-file sets CMS_NOATTR. We could be more
flexible and permit authattrs optionally, but only permit minimal
content.
(*) VERIFYING_FIRMWARE_SIGNATURE
This requires that the SignedData content type be pkcs7-data and
requires authattrs. In future, this will require an attribute
holding the target firmware name in addition to the minimal set.
(*) VERIFYING_UNSPECIFIED_SIGNATURE
This requires that the SignedData content type be pkcs7-data but
allows either no authattrs or only permits the minimal set.
(*) VERIFYING_KEXEC_PE_SIGNATURE
This only supports the Authenticode SPC_INDIRECT_DATA content type
and requires at least an SpcSpOpusInfo authattr in addition to the
minimal set. It also permits an SPC_STATEMENT_TYPE authattr (and
an S/MIME capabilities authattr because the pesign program doesn't
remove these).
(*) VERIFYING_KEY_SIGNATURE
(*) VERIFYING_KEY_SELF_SIGNATURE
These are invalid in this context but are included for later use
when limiting the use of X.509 certs.
(4) The pkcs7_test key type is given a module parameter to select between
the above options for testing purposes. For example:
echo 1 >/sys/module/pkcs7_test_key/parameters/usage
keyctl padd pkcs7_test foo @s </tmp/stuff.pkcs7
will attempt to check the signature on stuff.pkcs7 as if it contains a
firmware blob (1 being VERIFYING_FIRMWARE_SIGNATURE).
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
Fix up the dependencies somewhat too, while we're at it.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
This is not required for the module signing key, although it doesn't do any
harm — it just means that any additional certs in the PEM file are also
trusted by the kernel.
But it does allow us to use the extract-cert tool for processing the extra
certs from CONFIG_SYSTEM_TRUSTED_KEYS, instead of that horrid awk|base64
hack.
Also cope with being invoked with no input file, creating an empty output
file as a result.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Make sign-file use the OpenSSL CMS routines to generate a message to be
used as the signature blob instead of the PKCS#7 routines. This allows us
to change how the matching X.509 certificate is selected. With PKCS#7 the
only option is to match on the serial number and issuer fields of an X.509
certificate; with CMS, we also have the option of matching by subjectKeyId
extension. The new behaviour is selected with the "-k" flag.
Without the -k flag specified, the output is pretty much identical to the
PKCS#7 output.
Whilst we're at it, don't include the S/MIME capability list in the message
as it's irrelevant to us.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-By: David Woodhouse <David.Woodhouse@intel.com
Pull RCU changes from Paul E. McKenney:
- The combination of tree geometry-initialization simplifications
and OS-jitter-reduction changes to expedited grace periods.
These two are stacked due to the large number of conflicts
that would otherwise result.
[ With one addition, a temporary commit to silence a lockdep false
positive. Additional changes to the expedited grace-period
primitives (queued for 4.4) remove the cause of this false
positive, and therefore include a revert of this temporary commit. ]
- Documentation updates.
- Torture-test updates.
- Miscellaneous fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In kbuild it is allowed to define objects in files named "Makefile"
and "Kbuild".
Currently localmodconfig reads objects only from "Makefile"s and misses
modules like nouveau.
Link: http://lkml.kernel.org/r/1437948415-16290-1-git-send-email-richard@nod.at
Cc: stable@vger.kernel.org
Reported-and-tested-by: Leonidas Spyropoulos <artafinde@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Module symbols have a limited length, but currently the build system
allows the build finishing even if the driver code contains a too long
symbol name, which eventually overflows the modversion_info[] item.
The compiler may catch at compiling *.mod.c like
CC xxx.mod.o
xxx.mod.c:18:16: warning: initializer-string for array of chars is too long
but it's merely a warning.
This patch adds the check of the symbol length in modpost and stops
the build properly.
Currently MODULE_NAME_LEN is defined in modpost.c instead of referring
to the definition in kernel header because including linux/module.h is
messy and we must cover cross-compilation.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Where an external PEM file or PKCS#11 URI is given, we can get the cert
from it for ourselves instead of making the user drop signing_key.x509
in place for us.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
This is only the key; the corresponding *cert* still needs to be in
$(topdir)/signing_key.x509. And there's no way to actually use this
from the build system yet.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
We don't want this in the Kconfig since it might then get exposed in
/proc/config.gz. So make it a parameter to Kbuild instead. This also
means we don't have to jump through hoops to strip quotes from it, as
we would if it was a config option.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Make the -d option (which currently isn't actually wired to anything) write
out the PKCS#7 message as per the -p option and then exit without either
modifying the source or writing out a compound file of the source, signature
and metadata.
This will be useful when firmware signature support is added
upstream as firmware will be left intact, and we'll only require
the signature file. The descriptor is implicit by file extension
and the file's own size.
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Move to using PKCS#7 messages as module signatures because:
(1) We have to be able to support the use of X.509 certificates that don't
have a subjKeyId set. We're currently relying on this to look up the
X.509 certificate in the trusted keyring list.
(2) PKCS#7 message signed information blocks have a field that supplies the
data required to match with the X.509 certificate that signed it.
(3) The PKCS#7 certificate carries fields that specify the digest algorithm
used to generate the signature in a standardised way and the X.509
certificates specify the public key algorithm in a standardised way - so
we don't need our own methods of specifying these.
(4) We now have PKCS#7 message support in the kernel for signed kexec purposes
and we can make use of this.
To make this work, the old sign-file script has been replaced with a program
that needs compiling in a previous patch. The rules to build it are added
here.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Vivek Goyal <vgoyal@redhat.com>
Provide a utility that:
(1) Digests a module using the specified hash algorithm (typically sha256).
[The digest can be dumped into a file by passing the '-d' flag]
(2) Generates a PKCS#7 message that:
(a) Has detached data (ie. the module content).
(b) Is signed with the specified private key.
(c) Refers to the specified X.509 certificate.
(d) Has an empty X.509 certificate list.
[The PKCS#7 message can be dumped into a file by passing the '-p' flag]
(3) Generates a signed module by concatenating the old module, the PKCS#7
message, a descriptor and a magic string. The descriptor contains the
size of the PKCS#7 message and indicates the id_type as PKEY_ID_PKCS7.
(4) Either writes the signed module to the specified destination or renames
it over the source module.
This allows module signing to reuse the PKCS#7 handling code that was added
for PE file parsing for signed kexec.
Note that the utility is written in C and must be linked against the OpenSSL
crypto library.
Note further that I have temporarily dropped support for handling externally
created signatures until we can work out the best way to do those. Hopefully,
whoever creates the signature can give me a PKCS#7 certificate.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Vivek Goyal <vgoyal@redhat.com>
Copy string names to tokens in ASN.1 compiler rather than storing a pointer
into the source text. This means we don't have to use "%*.*s" all over the
place.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
Add an ASN.1 compiler option to dump the element tree to stdout.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-By: David Woodhouse <David.Woodhouse@intel.com>
Describing arguments at top of a struct definition works fine
for small/medium size structs, but it definitely doesn't work well
for struct with a huge list of elements.
Keeping the arguments list inside the struct body makes it easier
to maintain the documentation.
ie:
/**
* struct my_struct - short description
* @a: first member
* @b: second member
*
* Longer description
*/
struct my_struct {
int a;
int b;
/**
* @c: This is longer description of C
*
* You can use paragraphs to describe arguments
* using this method.
*/
int c;
};
This patch allows the use of this kind of syntax. Only one argument
per comment and user can use how many paragraphs he needs. It should
start with /**, which is already being used by kernel-doc. If those
comment doesn't follow those rules, it will be ignored.
Signed-off-by: Danilo Cesar Lemes de Paula <danilo.cesar@collabora.co.uk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Stephan Mueller <smueller@chronox.de>
Cc: Michal Marek <mmarek@suse.cz>
Cc: linux-kernel@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: intel-gfx <intel-gfx@lists.freedesktop.org>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
An ANY object in an ASN.1 grammar that is marked OPTIONAL should be skipped
if there is no more data to be had.
This can be tested by editing X.509 certificates or PKCS#7 messages to
remove the NULL from subobjects that look like the following:
SEQUENCE {
OBJECT(2a864886f70d01010b);
NULL();
}
This is an algorithm identifier plus an optional parameter.
The modified DER can be passed to one of:
keyctl padd asymmetric "" @s </tmp/modified.x509
keyctl padd pkcs7_test foo @s </tmp/modified.pkcs7
It should work okay with the patch and produce EBADMSG without.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
In an ASN.1 description where there is a CHOICE construct that contains
elements with IMPLICIT tags that refer to constructed types, actions to be
taken on those elements should be conditional on the corresponding element
actually being matched. Currently, however, such actions are performed
unconditionally in the middle of processing the CHOICE.
For example, look at elements 'b' and 'e' here:
A ::= SEQUENCE {
CHOICE {
b [0] IMPLICIT B ({ do_XXXXXXXXXXXX_b }),
c [1] EXPLICIT C ({ do_XXXXXXXXXXXX_c }),
d [2] EXPLICIT B ({ do_XXXXXXXXXXXX_d }),
e [3] IMPLICIT C ({ do_XXXXXXXXXXXX_e }),
f [4] IMPLICIT INTEGER ({ do_XXXXXXXXXXXX_f })
}
} ({ do_XXXXXXXXXXXX_A })
B ::= SET OF OBJECT IDENTIFIER ({ do_XXXXXXXXXXXX_oid })
C ::= SET OF INTEGER ({ do_XXXXXXXXXXXX_int })
They each have an action (do_XXXXXXXXXXXX_b and do_XXXXXXXXXXXX_e) that
should only be processed if that element is matched.
The problem is that there's no easy place to hang the action off in the
subclause (type B for element 'b' and type C for element 'e') because
subclause opcode sequences can be shared.
To fix this, introduce a conditional action opcode(ASN1_OP_MAYBE_ACT) that
the decoder only processes if the preceding match was successful. This can
be seen in an excerpt from the output of the fixed ASN.1 compiler for the
above ASN.1 description:
[ 13] = ASN1_OP_COND_MATCH_JUMP_OR_SKIP, // e
[ 14] = _tagn(CONT, CONS, 3),
[ 15] = _jump_target(45), // --> C
[ 16] = ASN1_OP_MAYBE_ACT,
[ 17] = _action(ACT_do_XXXXXXXXXXXX_e),
In this, if the op at [13] is matched (ie. element 'e' above) then the
action at [16] will be performed. However, if the op at [13] doesn't match
or is skipped because it is conditional and some previous op matched, then
the action at [16] will be ignored.
Note that to make this work in the decoder, the ASN1_OP_RETURN op must set
the flag to indicate that a match happened. This is necessary because the
_jump_target() seen above introduces a subclause (in this case an object of
type 'C') which is likely to alter the flag. Setting the flag here is okay
because to process a subclause, a match must have happened and caused a
jump.
This cannot be tested with the code as it stands, but rather affects future
code.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
Fix the handling of CHOICE types in the ASN.1 compiler to make SEQUENCE and
SET elements in a CHOICE be correctly rendered as skippable and conditional
as appropriate.
For example, in the following ASN.1:
Foo ::= SEQUENCE { w1 INTEGER, w2 Bar, w3 OBJECT IDENTIFIER }
Bar ::= CHOICE {
x1 Seq1,
x2 [0] IMPLICIT OCTET STRING,
x3 Seq2,
x4 SET OF INTEGER
}
Seq1 ::= SEQUENCE { y1 INTEGER, y2 INTEGER, y3 INTEGER }
Seq2 ::= SEQUENCE { z1 BOOLEAN, z2 BOOLEAN, z3 BOOLEAN }
the output in foo.c generated by:
./scripts/asn1_compiler foo.asn1 foo.c foo.h
included:
// Bar
// Seq1
[ 4] = ASN1_OP_MATCH,
[ 5] = _tag(UNIV, CONS, SEQ),
...
[ 13] = ASN1_OP_COND_MATCH_OR_SKIP, // x2
[ 14] = _tagn(CONT, PRIM, 0),
// Seq2
[ 15] = ASN1_OP_MATCH,
[ 16] = _tag(UNIV, CONS, SEQ),
...
[ 24] = ASN1_OP_COND_MATCH_JUMP_OR_SKIP, // x4
[ 25] = _tag(UNIV, CONS, SET),
...
[ 27] = ASN1_OP_COND_FAIL,
as a result of the CHOICE - but this is wrong on lines 4 and 15 because
both of these should be skippable (one and only one of the four can be
picked) and the one on line 15 should also be conditional so that it is
ignored if anything before it matches.
After the patch, it looks like:
// Bar
// Seq1
[ 4] = ASN1_OP_MATCH_JUMP_OR_SKIP, // x1
[ 5] = _tag(UNIV, CONS, SEQ),
...
[ 7] = ASN1_OP_COND_MATCH_OR_SKIP, // x2
[ 8] = _tagn(CONT, PRIM, 0),
// Seq2
[ 9] = ASN1_OP_COND_MATCH_JUMP_OR_SKIP, // x3
[ 10] = _tag(UNIV, CONS, SEQ),
...
[ 12] = ASN1_OP_COND_MATCH_JUMP_OR_SKIP, // x4
[ 13] = _tag(UNIV, CONS, SET),
...
[ 15] = ASN1_OP_COND_FAIL,
where all four options are skippable and the second, third and fourth are
all conditional, as is the backstop at the end.
This hasn't been a problem so far because in the ASN.1 specs we have are
either using primitives or are using SET OF and SEQUENCE OF which are
handled correctly.
Whilst we're at it, also make sure that element labels get included in
comments in the output for elements that have complex types.
This cannot be tested with the code as it stands, but rather affects future
code.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-By: David Woodhouse <David.Woodhouse@intel.com>
Until now, checkkonfigsymbols.py did not check default statements for
references on missing Kconfig symbols (i.e., undefined Kconfig options).
Hence, add support to parse and check the Kconfig default statement.
Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Color output to make it more readable. Symbols will be printed yellow,
relevant commits (see --find) red.
Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Acked-by: Stefan Hengelein <stefan.hengelein@fau.de>
Acked-by: Andreas Ruprecht <andreas.ruprecht@fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add option -f/--find to find relevant commits when using the --diff
option. --find is useful in case a user wants to check commits that
potentially cause a Kconfig symbol to be missing. This is done via 'git
log -G $SYMBOL' (i.e., to get a list of commits that change $SYMBOL).
The relevant commits are printed below the "SYMBOL\tFILES" line,
followed by an empty line to increase readability.
Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Acked-by: Stefan Hengelein <stefan.hengelein@fau.de>
Acked-by: Andreas Ruprecht <andreas.ruprecht@fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The synchronize_rcu_expedited() and synchronize_sched_expedited()
expedited-grace-period primitives induce OS jitter, which can degrade
real-time response. This commit therefore adds a checkpatch.pl warning
on any patch adding them.
Note that this patch does not warn on synchronize_srcu_expedited()
because it does not induce OS jitter, courtesy of its otherwise
much-maligned read-side memory barriers.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
No one uses this anymore, and this is not the first time the
idea of replacing it with a (now possible) userspace side.
Lock stealing logic was removed long ago in when the lock
was granted to the highest prio.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1435782588-4177-2-git-send-email-dave@stgolabs.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Changes in ("checkpatch: categorize some long line length checks")
now erroneously reports long line defects in patch context.
Fix it.
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This fixes the compilation of policy generated by mdp with the recent
version of checkpolicy.
Signed-off-by: Laurent Bigonville <bigon@bigon.be>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Together with the preceding changes, this allows man pages to be built
reproducibly.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Regular expressions for highlights in kernel-doc are stored in a Perl
hash. These hashes are ordered differently for each Perl run. This will
prevent kernel-doc to behave deterministically when parsing “@foo()” as
in some runs it will be interpreted as a parameter and in the others it
will be interpreted as a function.
We now sort the %highlights hash to get the same behavior on every run.
Signed-off-by: Jérémy Bobbio <lunar@debian.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
- Fix for an ACPI resources management regression introduced
during the 4.1 cycle (that unfortunately went into -stable)
effectively reverting the bad commit along with the recent
fixups on top of it and using an alternative approach to
address the underlying issue (Rafael J Wysocki).
- Fix for a memory leak and an incorrect return value in an
error code path in the ACPI LPSS (Low-Power Subsystem) driver
(Rafael J Wysocki).
- Fix for a leftover dangling pointer in an error code path in
the new wakeup IRQ support code (Rafael J Wysocki).
- Fix to prevent infinite loops (due to errors in other places)
from happening in the core generic PM domains support code
(Geert Uytterhoeven).
- Hibernation documentation update/clarification (Uwe Geuder).
- Support for _CLS-based device enumeration in the ACPI core
and in the ATA subsystem (Suravee Suthikulpanit).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQIcBAABCAAGBQJVnZFwAAoJEILEb/54YlRxuysQALZ3y6QAtVFWurwOLXg0Zwoy
qoBWlfCRCEKsiLQNe1sDK+dqmfi+ZXvsEqm4y/4uU8dsJdTv1MByaX0aQxP0qmOj
Lre9AGNq28JxtTmU2o00qjLW9d9WIQKJn1N51+qqGKTVoqijmEcVlz5xVnqoJmBQ
s0Af2kAzG7CLFtNzPI6RbOPMm7S0VEiI/WQhKZXWqGheppfDaRG+wl0pKPv95G73
7wCG+yklSi4j5u2Aox/x1samOy+c+S/l2VgU+Decnv0ccPlChYBCMOzWSJuFn5v7
qVEvUrFYc2ItQElzaqTWc1uEPzf0yg/S4pWJjLBADpDAUBQNXExmaQ2wLlzgR00/
K/cGUqCn0APcw4tjZjVlGvTHmJg6ivdeceQuLdgxGoGgvph9V9JlHD9zmzFLqAXl
3VCJiuHnT9QyfEcAkOhZUvO5WcX892fNpHYe/riLQOll9ODwoWCr+TofGfIvHKZp
1XQ1r68rBpsZnnb5JpYT8F/LgaKa4nWZboLroFWi9SZ0jYdH4U7k88C2bCYpaZGz
S07l4GEICSuTPHpQNzshzYw6lWJqoXPFQ5okqnZxwNDWAE30ZII0LQwasuupmuR4
S1fFi30YTI23tiDEZRWgVWbMPD++jZdQoflBZq5Lo8s4EfPD5yS+LtxACzktDlM0
fq6bcUUO85Weo+zNxEa3
=qomE
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI updates from Rafael Wysocki:
"These are fixes on top of the previous PM+ACPI pull requests
(including one fix for a 4.1 regression) and two commits adding
_CLS-based device enumeration support to the ACPI core and the ATA
subsystem that waited for the latest ACPICA changes to be merged.
Specifics:
- Fix for an ACPI resources management regression introduced during
the 4.1 cycle (that unfortunately went into -stable) effectively
reverting the bad commit along with the recent fixups on top of it
and using an alternative approach to address the underlying issue
(Rafael J Wysocki).
- Fix for a memory leak and an incorrect return value in an error
code path in the ACPI LPSS (Low-Power Subsystem) driver (Rafael J
Wysocki).
- Fix for a leftover dangling pointer in an error code path in the
new wakeup IRQ support code (Rafael J Wysocki).
- Fix to prevent infinite loops (due to errors in other places) from
happening in the core generic PM domains support code (Geert
Uytterhoeven).
- Hibernation documentation update/clarification (Uwe Geuder).
- Support for _CLS-based device enumeration in the ACPI core and in
the ATA subsystem (Suravee Suthikulpanit)"
* tag 'pm+acpi-4.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / wakeirq: Avoid setting power.wakeirq too hastily
ata: ahci_platform: Add ACPI _CLS matching
ACPI / scan: Add support for ACPI _CLS device matching
PM / hibernate: clarify resume documentation
PM / Domains: Avoid infinite loops in attach/detach code
ACPI / LPSS: Fix up acpi_lpss_create_device()
ACPI / PNP: Reserve ACPI resources at the fs_initcall_sync stage
The tilegx and tilepro compilers use .coldtext for their unlikely
executed text section name, so an __attribute__((cold)) function
will (when compiled with higher optimization levels) land in
the .coldtext section.
Modify modpost to add .coldtext to the set of OTHER_TEXT_SECTIONS
so we don't get warnings about referencing such a section in an
__ex_table block, and then also modify arch/tile/lib/memcpy_user_64.c
so that it uses plain ".coldtext" instead of ".coldtext.memcpy".
The latter naming is a relic of an earlier use of -ffunction-sections,
which we no longer use by default.
Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Device drivers typically use ACPI _HIDs/_CIDs listed in struct device_driver
acpi_match_table to match devices. However, for generic drivers, we do not
want to list _HID for all supported devices. Also, certain classes of devices
do not have _CID (e.g. SATA, USB). Instead, we can leverage ACPI _CLS,
which specifies PCI-defined class code (i.e. base-class, subclass and
programming interface). This patch adds support for matching ACPI devices using
the _CLS method.
To support loadable module, current design uses _HID or _CID to match device's
modalias. With the new way of matching with _CLS this would requires modification
to the current ACPI modalias key to include _CLS. This patch appends PCI-defined
class-code to the existing ACPI modalias as following.
acpi:<HID>:<CID1>:<CID2>:..:<CIDn>:<bbsspp>:
E.g:
# cat /sys/devices/platform/AMDI0600:00/modalias
acpi:AMDI0600:010601:
where bb is th base-class code, ss is te sub-class code, and pp is the
programming interface code
Since there would not be _HID/_CID in the ACPI matching table of the driver,
this patch adds a field to acpi_device_id to specify the matching _CLS.
static const struct acpi_device_id ahci_acpi_match[] = {
{ ACPI_DEVICE_CLASS(PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff) },
{},
};
In this case, the corresponded entry in modules.alias file would be:
alias acpi*:010601:* ahci_platform
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull kbuild updates from Michal Marek:
"Just a few kbuild core commits this time:
- kallsyms fix for CONFIG_XIP_KERNEL
- bashisms in scripts/link-vmlinux.sh fixed
- workaround to make DEBUG_INFO_REDUCED more useful yet still space
efficient
- clang is not wrongly detected when cross-compiling"
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: include core debug info when DEBUG_INFO_REDUCED
scripts: link-vmlinux: Don't pass page offset to kallsyms if XIP Kernel
scripts: fix link-vmlinux.sh bash-ism
Makefile: Fix detection of clang when cross-compiling
Pull kconfig updates from Michal Marek:
- kconfig conditions can use usual less/greater than comparisons
- kconfig warns about stray characters in Kconfig files
- bogus expression simplification removed
- some minor fixes
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kconfig: re-generate *.c_shipped files after previous change
kconfig: allow use of relations other than (in)equality
kconfig: don't silently ignore unhandled characters
kconfig: Wrap long "make help" text lines
scripts/kconfig/Makefile: Cosmetic fixes
scripts/kconfig/Makefile: Fix spelling of Qt
Kconfig: Remove bad inference rules expr_eliminate_dups2()
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=qNLm
-----END PGP SIGNATURE-----
Merge tag 'cpuinit-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
Pull __cpuinit removal from Paul Gortmaker:
"Remove __cpuinit macros and users.
We removed the __cpuinit stuff in 3.11-rc1 with commit 22f0a27367
("init.h: remove __cpuinit sections from the kernel") but we left some
no-op stubs as a courtesy to unmerged code.
Here we get rid of the stubs as well, since (as can be seen in these
changes) they are enabling use cases to sneak back in, primarily from
older BSP code that has been living out of tree for some time prior to
getting mainlined. So we get rid of these "new" users 1st and then
get rid of the stubs.
Obviously, getting rid of the stubs can't happen until all the users
are gone, so I had to keep this together as a series, even though some
of these commits since got picked up into maintainers trees as well.
The nature of this change is such that it should have zero impact on
the generated runtime.
This is one of several independent cleanup branches aimed at enabling
better organization in the init.h and module.h code. They have been
getting coverage in the linux-next tree for the last month, in
addition to my local testing, which also covers approximately a half
dozen or more architectures"
* tag 'cpuinit-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
init: delete the __cpuinit related stubs
kernel/cpu.c: remove new instance of __cpuinit that crept back in
sched/core: remove __cpuinit section tag that crept back in.
mips/mm/tlbex: remove new instance of __cpuinit that crept back in
mips/c-r4k: remove legacy __cpuinit section that crept in
mips/bcm77xx: remove legacy __cpuinit sections that crept in
mips/ath25: remove legacy __cpuinit section that crept in
arm/mach-hisi: remove legacy __CPUINIT section that crept in
arm/mach-rockchip: remove legacy __cpuinit section that crept in
arm/mach-mvebu: remove legacy __cpuinit sections that crept in
arm/mach-keystone: remove legacy __cpuinit sections that crept in
A whole lot of bug fixes. Nothing stands out here except the ability to
enable CONFIG_OF on every architecture, and an import of a newer version
of dtc.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tm5y
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux
Pull devicetree updates from Grant Likely:
"A whole lot of bug fixes.
Nothing stands out here except the ability to enable CONFIG_OF on
every architecture, and an import of a newer version of dtc"
* tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux: (22 commits)
of/irq: Rename "intc_desc" to "of_intc_desc" to fix OF on sh
of/irq: Fix pSeries boot failure
Documentation: DT: Fix a typo in the filename "lantiq,<chip>-pinumx.txt"
of: define of_find_node_by_phandle for !CONFIG_OF
of/address: use atomic allocation in pci_register_io_range()
of: Add vendor prefix for Zodiac Inflight Innovations
dt/fdt: add empty versions of early_init_dt_*_memory_arch
of: clean-up unnecessary libfdt include paths
of: make unittest select OF_EARLY_FLATTREE instead of depend on it
of: make CONFIG_OF user selectable
MIPS: prepare for user enabling of CONFIG_OF
of/fdt: fix argument name and add comments of unflatten_dt_node()
of: return NUMA_NO_NODE from fallback of_node_to_nid()
tps6507x.txt: Remove executable permission
of/overlay: Grammar s/an negative/a negative/
of/fdt: Make fdt blob input parameters of unflatten functions const
of: add helper function to retrive match data
of: Grammar s/property exist/property exists/
of: Move OF flags to be visible even when !CONFIG_OF
scripts/dtc: Update to upstream version 9d3649bd3be245c9
...
Merge third patchbomb from Andrew Morton:
- the rest of MM
- scripts/gdb updates
- ipc/ updates
- lib/ updates
- MAINTAINERS updates
- various other misc things
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (67 commits)
genalloc: rename of_get_named_gen_pool() to of_gen_pool_get()
genalloc: rename dev_get_gen_pool() to gen_pool_get()
x86: opt into HAVE_COPY_THREAD_TLS, for both 32-bit and 64-bit
MAINTAINERS: add zpool
MAINTAINERS: BCACHE: Kent Overstreet has changed email address
MAINTAINERS: move Jens Osterkamp to CREDITS
MAINTAINERS: remove unused nbd.h pattern
MAINTAINERS: update brcm gpio filename pattern
MAINTAINERS: update brcm dts pattern
MAINTAINERS: update sound soc intel patterns
MAINTAINERS: remove website for paride
MAINTAINERS: update Emulex ocrdma email addresses
bcache: use kvfree() in various places
libcxgbi: use kvfree() in cxgbi_free_big_mem()
target: use kvfree() in session alloc and free
IB/ehca: use kvfree() in ipz_queue_{cd}tor()
drm/nouveau/gem: use kvfree() in u_free()
drm: use kvfree() in drm_free_large()
cxgb4: use kvfree() in t4_free_mem()
cxgb3: use kvfree() in cxgb_free_mem()
...
- Add "make xenconfig" to assist in generating configs for Xen guests.
- Preparatory cleanups necessary for supporting 64 KiB pages in ARM
guests.
- Automatically use hvc0 as the default console in ARM guests.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJVkpoqAAoJEFxbo/MsZsTRu3IH/2AMPx2i65hoSqfHtGf3sz/z
XNfcidVmOElFVXGaW83m0tBWMemT5LpOGRfiq5sIo8xt/8xD2vozEkl/3kkf3RrX
EmZDw3E8vmstBdBTjWdovVhNenRc0m0pB5daS7wUdo9cETq1ag1L3BHTB3fEBApO
74V6qAfnhnq+snqWhRD3XAk3LKI0nWuWaV+5HsmxDtnunGhuRLGVs7mwxZGg56sM
mILA0eApGPdwyVVpuDe0SwV52V8E/iuVOWTcomGEN2+cRWffG5+QpHxQA8bOtF6O
KfqldiNXOY/idM+5+oSm9hespmdWbyzsFqmTYz0LvQvxE8eEZtHHB3gIcHkE8QU=
=danz
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.2-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from David Vrabel:
"Xen features and cleanups for 4.2-rc0:
- add "make xenconfig" to assist in generating configs for Xen guests
- preparatory cleanups necessary for supporting 64 KiB pages in ARM
guests
- automatically use hvc0 as the default console in ARM guests"
* tag 'for-linus-4.2-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
block/xen-blkback: s/nr_pages/nr_segs/
block/xen-blkfront: Remove invalid comment
block/xen-blkfront: Remove unused macro MAXIMUM_OUTSTANDING_BLOCK_REQS
arm/xen: Drop duplicate define mfn_to_virt
xen/grant-table: Remove unused macro SPP
xen/xenbus: client: Fix call of virt_to_mfn in xenbus_grant_ring
xen: Include xen/page.h rather than asm/xen/page.h
kconfig: add xenconfig defconfig helper
kconfig: clarify kvmconfig is for kvm
xen/pcifront: Remove usage of struct timeval
xen/tmem: use BUILD_BUG_ON() in favor of BUG_ON()
hvc_xen: avoid uninitialized variable warning
xenbus: avoid uninitialized variable warning
xen/arm: allow console=hvc0 to be omitted for guests
arm,arm64/xen: move Xen initialization earlier
arm/xen: Correctly check if the event channel interrupt is present
ARCv2 is the next generation ISA from Synopsys and basis for the
HS3{4,6,8} families of processors which retain the traditional ARC mantra of
low power and configurability and are now more performant and feature rich.
HS38x is a 10 stage pipeline core which supports MMU (with huge pages) and
SMP (upto 4 cores) among other features.
+ www.synopsys.com/dw/ipdir.php?ds=arc-hs38-processor
+ http://news.synopsys.com/2014-10-14-New-DesignWare-ARC-HS38-Processor-Doubles-Performance-for-Embedded-Linux-Applications
+ http://www.embedded.com/electronics-news/4435975/Synopsys-ARC-HS38-core-gives-2X-boost-to-Linux-based-apps
- Support for ARC SDP (Software Development platform): Main Board + CPU Cards
= AXS101: CPU Card with ARC700 in silicon @ 700 MHz
= AXS103: CPU Card with HS38x in FPGA
- Refactoring of ARCompact port to accomodate new ARCv2 ISA
- Miscll updates/cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=KwNo
-----END PGP SIGNATURE-----
Merge tag 'arc-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC architecture updates from Vineet Gupta:
- support for HS38 cores based on ARCv2 ISA
ARCv2 is the next generation ISA from Synopsys and basis for the
HS3{4,6,8} families of processors which retain the traditional ARC mantra of
low power and configurability and are now more performant and feature rich.
HS38x is a 10 stage pipeline core which supports MMU (with huge pages) and
SMP (upto 4 cores) among other features.
+ www.synopsys.com/dw/ipdir.php?ds=arc-hs38-processor
+ http://news.synopsys.com/2014-10-14-New-DesignWare-ARC-HS38-Processor-Doubles-Performance-for-Embedded-Linux-Applications
+ http://www.embedded.com/electronics-news/4435975/Synopsys-ARC-HS38-core-gives-2X-boost-to-Linux-based-apps
- support for ARC SDP (Software Development platform): Main Board + CPU Cards
= AXS101: CPU Card with ARC700 in silicon @ 700 MHz
= AXS103: CPU Card with HS38x in FPGA
- refactoring of ARCompact port to accomodate new ARCv2 ISA
- misc updates/cleanups
* tag 'arc-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (72 commits)
ARC: Fix build failures for ARCompact in linux-next after ARCv2 support
ARCv2: Allow older gcc to cope with new regime of ARCv2/ARCompact support
ARCv2: [vdk] dts files and defconfig for HS38 VDK
ARCv2: [axs103] Support ARC SDP FPGA platform for HS38x cores
ARC: [axs101] Prepare for AXS103
ARCv2: [nsim*hs*] Support simulation platforms for HS38x cores
ARCv2: All bits in place, allow ARCv2 builds
ARCv2: SLC: Handle explcit flush for DMA ops (w/o IO-coherency)
ARCv2: STAR 9000837815 workaround hardware exclusive transactions livelock
ARC: Reduce bitops lines of code using macros
ARCv2: barriers
arch: conditionally define smp_{mb,rmb,wmb}
ARC: add smp barriers around atomics per Documentation/atomic_ops.txt
ARC: add compiler barrier to LLSC based cmpxchg
ARCv2: SMP: intc: IDU 2nd level intc for dynamic IRQ distribution
ARCv2: SMP: clocksource: Enable Global Real Time counter
ARCv2: SMP: ARConnect debug/robustness
ARCv2: SMP: Support ARConnect (MCIP) for Inter-Core-Interrupts et al
ARC: make plat_smp_ops weak to allow over-rides
ARCv2: clocksource: Introduce 64bit local RTC counter
...
This makes the usage more flexible.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Thiébaud Weksteen <thiebaud@weksteen.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a gdb script to verify the consistency of lists.
Signed-off-by: Thiébaud Weksteen <thiebaud@weksteen.fr>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here's the big USB patchset for 4.2-rc1. As is normal these days, the
majority of changes are in the gadget drivers, with a bunch of other
small driver changes.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlWNobIACgkQMUfUDdst+ylXtQCgwTnzFBzly+3h1Npa2CWkr/Lw
TWAAn31qEP28MLjm8iVJLNPwdVd2kt1w
=hrdz
-----END PGP SIGNATURE-----
Merge tag 'usb-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB updates from Greg KH:
"Here's the big USB patchset for 4.2-rc1. As is normal these days, the
majority of changes are in the gadget drivers, with a bunch of other
small driver changes.
All of these have been in linux-next with no reported issues"
* tag 'usb-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (175 commits)
usb: dwc3: Use ASCII space in Kconfig
usb: chipidea: add work-around for Marvell HSIC PHY startup
usb: chipidea: allow multiple instances to use default ci_default_pdata
dt-bindings: Consolidate ChipIdea USB ci13xxx bindings
phy: add Marvell HSIC 28nm PHY
phy: Add Marvell USB 2.0 OTG 28nm PHY
dt-bindings: Add Marvell PXA1928 USB and HSIC PHY bindings
USB: ssb: use devm_kzalloc
USB: ssb: fix error handling in ssb_hcd_create_pdev()
usb: isp1760: check for null return from kzalloc
cdc-acm: Add support of ATOL FPrint fiscal printers
usb: chipidea: usbmisc_imx: Remove unneeded semicolon
USB: usbtmc: add device quirk for Rigol DS6104
USB: serial: mos7840: Use setup_timer
phy: twl4030-usb: add ABI documentation
phy: twl4030-usb: remove incorrect pm_runtime_get_sync() in probe function.
phy: twl4030-usb: remove pointless 'suspended' test in 'suspend' callback.
phy: twl4030-usb: make runtime pm more reliable.
drivers:usb:fsl: Fix compilation error for fsl ehci drv
usb: renesas_usbhs: Don't disable the pipe if Control write status stage
...
Here's the big char/misc driver pull request for 4.2-rc1.
Lots of mei, extcon, coresight, uio, mic, and other driver updates in
here. Full details in the shortlog. All of these have been in
linux-next for some time with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlWNn0gACgkQMUfUDdst+ykCCQCgvdF4F2+Hy9+RATdk22ak1uq1
JDMAoJTf4oyaIEdaiOKfEIWg9MasS42B
=H5wD
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here's the big char/misc driver pull request for 4.2-rc1.
Lots of mei, extcon, coresight, uio, mic, and other driver updates in
here. Full details in the shortlog. All of these have been in
linux-next for some time with no reported problems"
* tag 'char-misc-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (176 commits)
mei: me: wait for power gating exit confirmation
mei: reset flow control on the last client disconnection
MAINTAINERS: mei: add mei_cl_bus.h to maintained file list
misc: sram: sort and clean up included headers
misc: sram: move reserved block logic out of probe function
misc: sram: add private struct device and virt_base members
misc: sram: report correct SRAM pool size
misc: sram: bump error message level on unclean driver unbinding
misc: sram: fix device node reference leak on error
misc: sram: fix enabled clock leak on error path
misc: mic: Fix reported static checker warning
misc: mic: Fix randconfig build error by including errno.h
uio: pruss: Drop depends on ARCH_DAVINCI_DA850 from config
uio: pruss: Add CONFIG_HAS_IOMEM dependence
uio: pruss: Include <linux/sizes.h>
extcon: Redefine the unique id of supported external connectors without 'enum extcon' type
char:xilinx_hwicap:buffer_icap - change 1/0 to true/false for bool type variable in function buffer_icap_set_configuration().
Drivers: hv: vmbus: Allocate ring buffer memory in NUMA aware fashion
parport: check exclusive access before register
w1: use correct lock on error in w1_seq_show()
...
Merge second patchbomb from Andrew Morton:
- most of the rest of MM
- lots of misc things
- procfs updates
- printk feature work
- updates to get_maintainer, MAINTAINERS, checkpatch
- lib/ updates
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (96 commits)
exit,stats: /* obey this comment */
coredump: add __printf attribute to cn_*printf functions
coredump: use from_kuid/kgid when formatting corename
fs/reiserfs: remove unneeded cast
NILFS2: support NFSv2 export
fs/befs/btree.c: remove unneeded initializations
fs/minix: remove unneeded cast
init/do_mounts.c: add create_dev() failure log
kasan: remove duplicate definition of the macro KASAN_FREE_PAGE
fs/efs: femove unneeded cast
checkpatch: emit "NOTE: <types>" message only once after multiple files
checkpatch: emit an error when there's a diff in a changelog
checkpatch: validate MODULE_LICENSE content
checkpatch: add multi-line handling for PREFER_ETHER_ADDR_COPY
checkpatch: suggest using eth_zero_addr() and eth_broadcast_addr()
checkpatch: fix processing of MEMSET issues
checkpatch: suggest using ether_addr_equal*()
checkpatch: avoid NOT_UNIFIED_DIFF errors on cover-letter.patch files
checkpatch: remove local from codespell path
checkpatch: add --showfile to allow input via pipe to show filenames
...
Make this message similar to the "false positives" message and emit it
only once when scanning multiple files instead of after each file scanned.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
People often put diff snippets in changelogs. This causes problems
when one tries to apply a file containing both the changelog and the
diff because patch(1) tries to apply the diff which it found in the
changelog.
Warn once when what seems to be a diff snippet in the changelog exists.
Signed-off-by: Joe Perches <joe@perches.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is a well defined list of expected values for MODULE_LICENSE so warn
the user upon usage of unknown values.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggest using eth_zero_addr() or eth_broadcast_addr() instead of memset().
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Acked-by: Joe Perches <joe@perches.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove 's' modifier to avoid reporting the same warning several times.
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Acked-by: Joe Perches <joe@perches.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Check if memcmp() is used to compare ethernet addresses and suggest using
ether_addr_equal() or ether_addr_equal_unaligned()
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Acked-by: Joe Perches <joe@perches.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make an exception for the "Does not appear to be a unified-diff" error
when scanning what appears to be git generated cover letters.
Signed-off-by: Joe Perches <joe@perches.com>
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
local is typically used for manually installed apps.
For apps installed from distro the right path is /usr/share.
Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using "git diff | ./scripts/checkpatch -" does not have an
easy mechanism to see the files and lines actually modified.
Add --showfile to see the file and line specified in the diff.
When --showfile is used without --terse, the second line of each
message output is redundant, so it is removed.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add optional colors to make seeing message types a bit easier.
Add --color command line switch, default:on
Error is RED, warning is YELLOW, check is GREEN. The message type, if
shown, is BLUE.
Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Petr Mladek <pmladek@suse.cz>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If there are multiple patches/files on the command line,
use a prefix before the patch/file message output like:
--------------
patch/filename
--------------
to make the identifying which messages go with which
file/patch a bit easier to parse.
Move the perl version and false positive messages after
all the files have been scanned so that they are emitted
only once.
Standardize the NOTE: <...> form to always emit a blank
line before the NOTE and always use print << "EOM" style.
Signed-off-by: Joe Perches <joe@perches.com>
Suggested-by: Petr Mladek <pmladek@suse.cz>
Tested-by: Petr Mladek <pmladek@suse.cz>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Many lines of code extend beyond the maximum line length. Some of these
are possibly justified by use type.
For instance:
structure definitions where comments are added per member like:
struct foo {
type member; /* some long description */
And lines that don't fit the typical logging message style
where a string constant is used like:
SOME_MACRO(args, "Some long string");
Categorize these long line types so that checkpatch can use a command-line
--ignore=<type> option to avoid emitting some long line warnings.
One of the existing checkpatch exclusions allowed kernel-doc argument
documentation to exceed 80 columns because old versions of kernel-doc
required single line documentation. The requirement was removed in 2009
so remove that exclusion.
Add documentation to make the test a bit clearer.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Michael Shuey <shuey@purdue.edu>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
String detection where a source line with a string constant is converted
can either have an X or a space.
Some of the string detection regexes do not allow the space character, but
there is a handy $String variable that does.
Convert the remaining uses of string detection regexes to use the $String
variable to reduce possible false negatives.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
checkpatch uses various cues in its input patches and files to discover
the names of user-defined types and modifiers. It then uses that
information when processing expressions to discover potential style
issues.
Unfortunately, in rare cases, this means that checkpatch may give
different results if you run it on several input files in one execution,
or one by one!
The reason is that it may identify a type (or something that looks like a
type) in one file, and then carry this information over when processing a
different file.
For example, drivers/staging/media/bcm2048/radio-bcm2048.c contains this
line (in a macro):
size value;
and drivers/staging/media/davinci_vpfe/vpfe_video.c has this line:
while (size * *nbuffers > vpfe_dev->video_limit)
If checkpatch processes these 2 files in a single command like:
./scripts/checkpatch.pl -f $file1 $file2
the (spurious) "size" type detected in the first file will cause it to flag
the second file for improper use of the pointer dereference operator.
To fix this, store types and modifiers found in a file in separate arrays
from built-in ones, and reset the arrays of types and modifiers found in
files at the beginning of each new source file.
Signed-off-by: Alex Dowad <alexinbeijing@gmail.com>
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using declarations like u_int16_t in kernel code is not preferred.
Suggest the kernel sized types instead of the c99 types when not in the
uapi directory.
Add a $typeC99Typedefs variable for the types to check and neaten the
other typedef variables.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus sayeth:
: Pretty much every single time people use this "if
: (waitqueue_active())" model, it tends to be a bug, because it means
: that there is zero serialization with people who are just about to go
: to sleep. It's fundamentally racy against all the "wait_event()" loops
: that carefully do memory barriers between testing conditions and going
: to sleep, because the memory barriers now don't exist on the waking
: side.
:
: So I'm making a new rule: if you use waitqueue_active(), I want an
: explanation for why it's not racy with the waiter. A big comment about
: the memory ordering, or about higher-level locks that are held by the
: caller, or something.
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Perl 5.22 emits a deprecated message when "\C" is used in a regex. Perl
5.24 will disallow it altogether.
Fix it by using [A-Z] instead of \C.
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Tested-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Section headers can be quite long and some are very long and duplicated
for many initial characters.
The current maximum length emitted for a section header is 20 bytes (or
17 bytes then ... when the section header length is > 20).
Change that length to 50 so more of the section is shown.
Example new output:
$ ./scripts/get_maintainer.pl -f drivers/net/ethernet/broadcom/bnx2x/
Ariel Elior <ariel.elior@qlogic.com> (supporter:BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER)
netdev@vger.kernel.org (open list:BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER)
linux-kernel@vger.kernel.org (open list)
Old:
$ ./scripts/get_maintainer.pl -f drivers/net/ethernet/broadcom/bnx2x/
Ariel Elior <ariel.elior@qlogic.com> (supporter:BROADCOM BNX2X 10...)
netdev@vger.kernel.org (open list:BROADCOM BNX2X 10...)
linux-kernel@vger.kernel.org (open list)
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some people prefer not to be cc'd on patches. Add an ability to have a
file (.get_maintainer.ignore) with names and email addresses that are
excluded from being listed except when specifically listed as a maintainer
in a section.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=fE8E
-----END PGP SIGNATURE-----
Merge tag 'for-4.2' of git://git.sourceforge.jp/gitroot/uclinux-h8/linux
Pull Renesas H8/300 architecture re-introduction from Yoshinori Sato.
We dropped arch/h8300 two years ago as stale and old, this is a new and
more modern rewritten arch support for the same architecture.
* tag 'for-4.2' of git://git.sourceforge.jp/gitroot/uclinux-h8/linux: (27 commits)
h8300: fix typo.
h8300: Always build dtb
h8300: Remove ARCH_WANT_IPC_PARSE_VERSION
sh-sci: Get register size from platform device
clk: h8300: fix error handling in h8s2678_pll_clk_setup()
h8300: Symbol name fix
h8300: devicetree source
h8300: configs
h8300: IRQ chip driver
h8300: clocksource
h8300: clock driver
h8300: Build scripts
h8300: library functions
h8300: Memory management
h8300: miscellaneous functions
h8300: process helpers
h8300: compressed image support
h8300: Low level entry
h8300: kernel startup
h8300: Interrupt and exceptions
...
h8300's nm output have a lot of local symbols.
ex)
00000000 N .Lframe0
00000013 N .LLST1
00000026 N .LLST2
00000039 N .LLST3
0000004c N .LLST4
Added new pattern " .L" to filter rule.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Pull x86 core updates from Ingo Molnar:
"There were so many changes in the x86/asm, x86/apic and x86/mm topics
in this cycle that the topical separation of -tip broke down somewhat -
so the result is a more traditional architecture pull request,
collected into the 'x86/core' topic.
The topics were still maintained separately as far as possible, so
bisectability and conceptual separation should still be pretty good -
but there were a handful of merge points to avoid excessive
dependencies (and conflicts) that would have been poorly tested in the
end.
The next cycle will hopefully be much more quiet (or at least will
have fewer dependencies).
The main changes in this cycle were:
* x86/apic changes, with related IRQ core changes: (Jiang Liu, Thomas
Gleixner)
- This is the second and most intrusive part of changes to the x86
interrupt handling - full conversion to hierarchical interrupt
domains:
[IOAPIC domain] -----
|
[MSI domain] --------[Remapping domain] ----- [ Vector domain ]
| (optional) |
[HPET MSI domain] ----- |
|
[DMAR domain] -----------------------------
|
[Legacy domain] -----------------------------
This now reflects the actual hardware and allowed us to distangle
the domain specific code from the underlying parent domain, which
can be optional in the case of interrupt remapping. It's a clear
separation of functionality and removes quite some duct tape
constructs which plugged the remap code between ioapic/msi/hpet
and the vector management.
- Intel IOMMU IRQ remapping enhancements, to allow direct interrupt
injection into guests (Feng Wu)
* x86/asm changes:
- Tons of cleanups and small speedups, micro-optimizations. This
is in preparation to move a good chunk of the low level entry
code from assembly to C code (Denys Vlasenko, Andy Lutomirski,
Brian Gerst)
- Moved all system entry related code to a new home under
arch/x86/entry/ (Ingo Molnar)
- Removal of the fragile and ugly CFI dwarf debuginfo annotations.
Conversion to C will reintroduce many of them - but meanwhile
they are only getting in the way, and the upstream kernel does
not rely on them (Ingo Molnar)
- NOP handling refinements. (Borislav Petkov)
* x86/mm changes:
- Big PAT and MTRR rework: making the code more robust and
preparing to phase out exposing direct MTRR interfaces to drivers -
in favor of using PAT driven interfaces (Toshi Kani, Luis R
Rodriguez, Borislav Petkov)
- New ioremap_wt()/set_memory_wt() interfaces to support
Write-Through cached memory mappings. This is especially
important for good performance on NVDIMM hardware (Toshi Kani)
* x86/ras changes:
- Add support for deferred errors on AMD (Aravind Gopalakrishnan)
This is an important RAS feature which adds hardware support for
poisoned data. That means roughly that the hardware marks data
which it has detected as corrupted but wasn't able to correct, as
poisoned data and raises an APIC interrupt to signal that in the
form of a deferred error. It is the OS's responsibility then to
take proper recovery action and thus prolonge system lifetime as
far as possible.
- Add support for Intel "Local MCE"s: upcoming CPUs will support
CPU-local MCE interrupts, as opposed to the traditional system-
wide broadcasted MCE interrupts (Ashok Raj)
- Misc cleanups (Borislav Petkov)
* x86/platform changes:
- Intel Atom SoC updates
... and lots of other cleanups, fixlets and other changes - see the
shortlog and the Git log for details"
* 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (222 commits)
x86/hpet: Use proper hpet device number for MSI allocation
x86/hpet: Check for irq==0 when allocating hpet MSI interrupts
x86/mm/pat, drivers/infiniband/ipath: Use arch_phys_wc_add() and require PAT disabled
x86/mm/pat, drivers/media/ivtv: Use arch_phys_wc_add() and require PAT disabled
x86/platform/intel/baytrail: Add comments about why we disabled HPET on Baytrail
genirq: Prevent crash in irq_move_irq()
genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain
iommu, x86: Properly handle posted interrupts for IOMMU hotplug
iommu, x86: Provide irq_remapping_cap() interface
iommu, x86: Setup Posted-Interrupts capability for Intel iommu
iommu, x86: Add cap_pi_support() to detect VT-d PI capability
iommu, x86: Avoid migrating VT-d posted interrupts
iommu, x86: Save the mode (posted or remapped) of an IRTE
iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip
iommu: dmar: Provide helper to copy shared irte fields
iommu: dmar: Extend struct irte for VT-d Posted-Interrupts
iommu: Add new member capability to struct irq_remap_ops
x86/asm/entry/64: Disentangle error_entry/exit gsbase/ebx/usermode code
x86/asm/entry/32: Shorten __audit_syscall_entry() args preparation
x86/asm/entry/32: Explain reloading of registers after __audit_syscall_entry()
...
The __cpuinit support was removed several releases ago in 3.11-rc1 with
commit 22f0a27367 ("init.h: remove __cpuinit
sections from the kernel")
People have had a chance to update their out of tree code, so now we remove
the no-op stubs to ensure no more new use cases can creep back in.
Also delete the mention of __cpuinitdata from the tag script.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
This lets you build a kernel which can support xen dom0
or xen guests on i386, x86-64 and arm64 by just using:
make xenconfig
You can start from an allnoconfig and then switch to xenconfig.
This also splits out the options which are available currently
to be built with x86 and 'make ARCH=arm64' under a shared config.
Technically xen supports a dom0 kernel and also a guest
kernel configuration but upon review with the xen team
since we don't have many dom0 options its best to just
combine these two into one.
A few generic notes: we enable both of these:
CONFIG_INET=y
CONFIG_BINFMT_ELF=y
although technically not required given you likely will
end up with a pretty useless system otherwise.
A few architectural differences worth noting:
$ make allnoconfig; make xenconfig > /dev/null ; \
grep XEN .config > 64-bit-config
$ make ARCH=i386 allnoconfig; make ARCH=i386 xenconfig > /dev/null; \
grep XEN .config > 32-bit-config
$ make ARCH=arm64 allnoconfig; make ARCH=arm64 xenconfig > /dev/null; \
grep XEN .config > arm64-config
Since the options are already split up with a generic config and
architecture specific configs you anything on the x86 configs
are known to only work right now on x86. For instance arm64 doesn't
support MEMORY_HOTPLUG yet as such although we try to enabe it
generically arm64 doesn't have it yet, so we leave the xen
specific kconfig option XEN_BALLOON_MEMORY_HOTPLUG on x86's config
file to set expecations correctly.
Then on x86 we have differences between i386 and x86-64. The difference
between 64-bit-config and 32-bit-config is you don't get XEN_MCE_LOG as
this is only supported on 64-bit. You also do not get on i386
XEN_BALLOON_MEMORY_HOTPLUG, there does not seem to be any technical
reasons to not allow this but I gave up after a few attempts.
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: penberg@kernel.org
Cc: levinsasha928@gmail.com
Cc: mtosatti@redhat.com
Cc: fengguang.wu@intel.com
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: xen-devel@lists.xenproject.org
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Michal Marek <mmarek@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
We'll be adding options for xen as well.
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: penberg@kernel.org
Cc: levinsasha928@gmail.com
Cc: mtosatti@redhat.com
Cc: fengguang.wu@intel.com
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: xen-devel@lists.xenproject.org
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Before rpm release 4.1, in 2002, either the rpm command or the
rpmbuild command could be used in the rpm-pkg or binrpm-pkg targets,
and the Makefile chose the rpm command if the rpmbuild command wasn't
found.
After release 4.1, however, the rpm command could no longer be used in
place of the rpmbuild command. As the rpmbuild command is not
installed by default, this can lead to failures with the rpm-pkg and
binrpm-pkg targets:
rpm --define "_builddir ." --target \
x86_64 -bb ./binkernel.spec
rpm --target: unknown option
scripts/package/Makefile:60: recipe for target 'binrpm-pkg' failed
Change the Makefile to use rpmbuild unconditionally to avoid this.
Signed-off-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Over the years I found it desirable to be able to use all sorts of
relations, not just (in)equality. And apparently I'm not the only one,
as there's at least one example in the tree where the programmer
assumed this would work (see DEBUG_UART_8250_WORD in
arch/arm/Kconfig.debug). Another possible use would e.g. be to fold the
two SMP/NR_CPUS prompts into one: SMP could be promptless, simply
depending on NR_CPUS > 1.
A (desirable) side effect of this change - resulting from numeric
values now necessarily being compared as numbers rather than as
strings - is that comparing hex values now works as expected: Other
than int ones (which aren't allowed to have leading zeroes), zeroes
following the 0x prefix made them compare unequal even if their values
were equal.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
At the very least we should tell people that what they wrote is not
what the utility understands.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Commit d5e616fc1c ("checkpatch: add a few more --fix corrections")
broke the GLOBAL_INITIALISERS test with bad parentheses and optional
leading spaces.
Fix it.
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Bandan Das <bsd@makefile.in>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This resolves a merge issue in musb_core.c and we want the fixes that
were in Linus's tree in this branch as well for testing.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some "make help" text lines extend beyond 80 characters. Wrap them at 79
characters.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The build time generated syscall definitions are entry code related, move
them into the arch/x86/entry/ directory.
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Insert a blank line in order to improve the readability of the
generated patch and also make it consistent with the other
.cocci files.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
A previous commit, c93b76b34b ("mei: bus: report also uuid in module
alias") caused a build error as I missed applying a needed patch to add
some macros to uapi/linux/uuid.h. Instead of those additional macros,
change the mei code to use the existing uuid structure directly.
Fixes: c93b76b34b
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 2f35c41f58 ("module: Replace module_ref with atomic_t refcnt")
changes the way refcnt is handled but did not update the gdb script to
use the new variable.
Since refcnt is not per-cpu anymore, we can directly read its value.
Signed-off-by: Adrien Schildknecht <adrien+dev@schischi.me>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Pantelis Koukousoulas <pktoss@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Improve the commit log of the generated patch by mentioning the commit
log that makes threaded IRQs without a primary handler to be requested
with the IRQF_ONESHOT flag.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked- by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
expr_eliminate_dups2() in scripts/kconfig/expr.c applies two invalid
inference rules:
(FOO || BAR) && (!FOO && !BAR) -> n
(FOO && BAR) || (!FOO || !BAR) -> y
They would be correct in propositional logic, but this is a three-valued
logic, and here it is wrong in that it changes semantics. It becomes
immediately visible when assigning the value 1 to both, FOO and BAR:
(FOO || BAR) && (!FOO && !BAR)
-> min(max(1, 1), min(2-1, 2-1)) = min(1, 1) = 1
while n evaluates to 0 and
(FOO && BAR) || (!FOO || !BAR)
-> max(min(1, 1), max(2-1, 2-1)) = max(1, 1) = 1
with y evaluating to 2.
Fix it by removing expr_eliminate_dups2() and the functions that have no
use anywhere else: expr_extract_eq_and(), expr_extract_eq_or(),
and expr_extract_eq() from scripts/kconfig/expr.c
Currently the bug is not triggered in mainline, so this patch does not
modify the configuration space there. To observe the bug consider this
example:
config MODULES
def_bool y
option modules
config FOO
def_tristate m
config BAR
def_tristate m
config TEST1
def_tristate y
depends on (FOO || BAR) && (!FOO && !BAR)
if TEST1 = n
comment "TEST1 broken"
endif
config TEST2
def_tristate y
depends on (FOO && BAR) || (!FOO || !BAR)
if TEST2 = y
comment "TEST2 broken"
endif
config TEST3
def_tristate y
depends on m && !m
if TEST3 = n
comment "TEST3 broken"
endif
TEST1, TEST2 and TEST3 should all evaluate to m, but without the patch,
none of them does. It is probably not obvious that TEST3 is the same bug,
but it becomes clear when considering what happens internally to the
expression
m && !m":
First it expands to
(m && MODULES) && !(m && MODULES),
then it is transformed into
(m && MODULES) && (!m || !MODULES),
and finally due to the bug it is replaced with n.
As a side effect, this patch reduces code size in expr.c by roughly 10%
and slightly improves startup time for all configuration frontends.
Signed-off-by: Martin Walch <walch.martin@web.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Some more recent distributions set the default interpreter to python3,
causing the script to break since it's written for python2.
Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sometimes a user might be interested to filter certain reports (e.g.,
the many defconfigs). Now, this can be achieved by specifying a Python
regex with -i / --ignore.
Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to automate modules matching add device uuid
which is reported in client enumeration, keep also
the name that is needed in for nfc distinguishing radio vendor
Report mei:name:uuid
Cc: linux-api@vger.kernel.org
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This semantic patch replaces explicit computations of vma page count
with explicit function call.
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
When Kernel is executed in place from ROM, the symbol addresses can be
lower than the page offset.
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Correct form is 'always requested'.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
According to Documentation/SubmittingPatches:
"Describe your changes in imperative mood, e.g. "make xyzzy do frotz"
instead of "[This patch] makes xyzzy do frotz" or "[I] changed xyzzy
to do frotz", as if you are giving orders to the codebase to change
its behaviour.
So do as recommended.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
According to Documentation/SubmittingPatches:
"Describe your changes in imperative mood, e.g. "make xyzzy do frotz"
instead of "[This patch] makes xyzzy do frotz" or "[I] changed xyzzy
to do frotz", as if you are giving orders to the codebase to change
its behaviour."
So do as recommended.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Make the sentence sensible.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
According to Documentation/SubmittingPatches:
"Describe your changes in imperative mood, e.g. "make xyzzy do frotz"
instead of "[This patch] makes xyzzy do frotz" or "[I] changed xyzzy
to do frotz", as if you are giving orders to the codebase to change
its behaviour."
So do as recommended.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Insert a blank line in order to improve the readability of the
generated patch and also make it consistent with the other
.cocci files.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
When building a package with make deb-pkg (say, for arm), the dtb files are
not added to the package. Given that things are still evolving on arm, it
make sense to have them along with the kernel and modules.
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
UTMI+ Low Pin Interface (ULPI) is a commonly used PHY
interface for USB 2.0. The ULPI specification describes a
standard set of registers which the vendors can extend for
their specific needs. ULPI PHYs provide often functions
such as charger detection and ADP sensing and probing.
There are two major issues that the bus type is meant to
tackle:
Firstly, ULPI registers are accessed from the controller.
The bus provides convenient method for the controller
drivers to share that access with the actual PHY drivers.
Secondly, there are already platforms that assume ULPI PHYs
are runtime detected, such as many Intel Baytrail based
platforms. They do not provide any kind of hardware
description for the ULPI PHYs like separate ACPI device
object that could be used to enumerate a device from.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
While building linux with dash shell:
LINK vmlinux
trap: SIGHUP: bad trap
/src/linux-4.0/Makefile:933: recipe for target 'vmlinux' failed
make[1]: *** [vmlinux] Error 1
See the following document for behavior of posix shell trap instruction:
http://pubs.opengroup.org/onlinepubs/000095399/utilities/trap.html
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sylvain BERTRAND <sylvain.bertrand@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
If CONFIG_MODULE_SIG_ALL is set, then user expects that all modules are
automatically signed in the result package, as it's for rpm-pkg, binrpm-pkg,
tar, tar-*. For deb-pkg this is correct only if CONFIG_DEBUG_INFO
is NOT set. In that case deb-package contains signed modules.
But if CONFIG_DEBUG_INFO is set, builddeb creates separate package with
debug information. To do that, debug information from all modules
is copied into separate files by objcopy. And loadable kernel modules are
stripped afterwards. Stripping removes previously (during modules_install)
added signatures from loadable kernel modules. Therefore final deb-package
contains unsigned modules despite of set option CONFIG_MODULE_SIG_ALL.
This patch resigns all stripped modules if CONFIG_MODULE_SIG_ALL is set
to solve this problem.
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Sync dtc with upstream as of commit 9d3649bd3be2 (Add testcases for
fdt_path_offset_namelen()).
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: devicetree@vger.kernel.org
The following script is used to import dtc upstream
into kernel. It was missing import of dtc/libfdt, with
this commit it will include the same.
Also, currently in arch and driver code that needs early access to
the flattened device tree it is necessary to add specific CFLAGS
so that when scripts/dtc/libfdt/libfdt.h is included the C
preprocessor is able to locate the libfdt versions of libfdt_env.h
and fdt.h without generating an error. So, this script replaces
angular brackets with quotation used to include header files
fdt.h and libfdt_env.h
Signed-off-by: Gaurav Minocha <gaurav.minocha.os@gmail.com>
[robh: reword commit headline and add 'git add']
Signed-off-by: Rob Herring <robh@kernel.org>
create_package() function tries to resolve used architecture
for everry package. Split the setting the architecture to a
new function, set_debarch(), called once on startup.
This allows using debarch from other parts of script as
needed.
v2: Follow Michals suggestion on setting variables at
top scope and also setting the fallback $debarch in the
new function
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
No need for the intermediary vmlinux.orig - bzip2 can keep the original
files used for compression with --keep.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
but most architectures seem fixed now. Thanks to all involved.
Last minute rebase because I noticed a "[PATCH]" had snuck into a commit
message somehow.
Cheers,
Rusty.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=EYrW
-----END PGP SIGNATURE-----
Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull module updates from Rusty Russell:
"Quentin opened a can of worms by adding extable entry checking to
modpost, but most architectures seem fixed now. Thanks to all
involved.
Last minute rebase because I noticed a "[PATCH]" had snuck into a
commit message somehow"
* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
modpost: don't emit section mismatch warnings for compiler optimizations
modpost: expand pattern matching to support substring matches
modpost: do not try to match the SHT_NUL section.
modpost: fix extable entry size calculation.
modpost: fix inverted logic in is_extable_fault_address().
modpost: handle -ffunction-sections
modpost: Whitelist .text.fixup and .exception.text
params: handle quotes properly for values not of form foo="bar".
modpost: document the use of struct section_check.
modpost: handle relocations mismatch in __ex_table.
scripts: add check_extable.sh script.
modpost: mismatch_handler: retrieve tosym information only when needed.
modpost: factorize symbol pretty print in get_pretty_name().
modpost: add handler function pointer to sectioncheck.
modpost: add .sched.text and .kprobes.text to the TEXT_SECTIONS list.
modpost: add strict white-listing when referencing sections.
module: do not print allocation-fail warning on bogus user buffer size
kernel/module.c: fix typos in message about unused symbols
Here's the usual "low-priority fixes that didn't make it into the last
few -rcs, with a twist: We had a fixes pull request that I didn't send
in time to get into 4.0, so we'll send some of them to Greg for -stable as
well.
Contents here is as usual not all that controversial:
- A handful of randconfig fixes from Arnd, in particular for older Samsung
platforms
- Exynos fixes, !SMP building, DTS updates for MMC and lid switch
- Kbuild fix to create output subdirectory for DTB files
- Misc minor fixes for OMAP
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=o/4N
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Here's the usual "low-priority fixes that didn't make it into the last
few -rcs, with a twist: We had a fixes pull request that I didn't send
in time to get into 4.0, so we'll send some of them to Greg for
-stable as well.
Contents here is as usual not all that controversial:
- a handful of randconfig fixes from Arnd, in particular for older
Samsung platforms
- Exynos fixes, !SMP building, DTS updates for MMC and lid switch
- Kbuild fix to create output subdirectory for DTB files
- misc minor fixes for OMAP"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits)
ARM: at91/dt: sama5d3 xplained: add phy address for macb1
kbuild: Create directory for target DTB
ARM: mvebu: Disable CPU Idle on Armada 38x
ARM: DRA7: Enable Cortex A15 errata 798181
ARM: dts: am57xx-beagle-x15: Add thermal map to include fan and tmp102
ARM: dts: DRA7: Add bandgap and related thermal nodes
bus: ocp2scp: SYNC2 value should be changed to 0x6
ARM: dts: am4372: Add "ti,am437x-ocp2scp" as compatible string for OCP2SCP
ARM: OMAP2+: remove superfluous NULL pointer check
ARM: EXYNOS: Fix build breakage cpuidle on !SMP
ARM: dts: fix lid and power pin-functions for exynos5250-spring
ARM: dts: fix mmc node updates for exynos5250-spring
ARM: OMAP4: remove dead kconfig option OMAP4_ERRATA_I688
MAINTAINERS: add OMAP defconfigs under OMAP SUPPORT
ARM: OMAP1: PM: fix some build warnings on 1510-only Kconfigs
ARM: cns3xxx: don't export static symbol
ARM: S3C24XX: avoid a Kconfig warning
ARM: S3C24XX: fix header file inclusions
ARM: S3C24XX: fix building without PM_SLEEP
ARM: S3C24XX: use SAMSUNG_WAKEMASK for s3c2416
...
Currently an allyesconfig build [gcc-4.9.1] can generate the following:
WARNING: vmlinux.o(.text.unlikely+0x3864): Section mismatch in
reference from the function cpumask_empty.constprop.3() to the
variable .init.data:nmi_ipi_mask
which comes from the cpumask_empty usage in arch/x86/kernel/nmi_selftest.c.
Normally we would not see a symbol entry for cpumask_empty since it is:
static inline bool cpumask_empty(const struct cpumask *srcp)
however in this case, the variant of the symbol gets emitted when GCC does
constant propagation optimization.
Fix things up so that any locally optimized constprop variants don't warn
when accessing variables that live in the __init sections.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently the match() function supports a leading * to match any
prefix and a trailing * to match any suffix. However there currently
is not a combination of both that can be used to target matches of
whole families of functions that share a common substring.
Here we expand the *foo and foo* match to also support *foo* with
the goal of targeting compiler generated symbol names that contain
strings like ".constprop." and ".isra."
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Trying to match the SHT_NUL section isn't useful and causes build failures
on parisc and mn10300 since the addition of section strict white-listing
and __ex_table sanitizing.
Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 050e57fd59 ("modpost: add strict white-listing when referencing....")
Fixes: 52dc0595d5 ("modpost: handle relocations mismatch in __ex_table.")
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As Guenter pointed out, we were never really calculating the extable entry
size because the pointer arithmetic was simply wrong. We want to check
we're handling the second relocation in __ex_table to infer an entry size,
but we were using (void*) pointers instead of Elf_Rel[a]* ones.
This fixes the problem by moving that check in the caller (since we can
deal with different types of relocations) and add is_second_extable_reloc()
to make the whole thing more readable.
Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
CC: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As Guenter pointed out, we want to assert that extable_entry_size has been
discovered and not the other way around. Moreover, this sanity check is
only valid when we're not dealing with the first relocation in __ex_table,
since we have not discovered the extable entry size at that point.
This was leading to a divide-by-zero on some architectures and make the
build fail.
Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
CC: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
52dc0595d5 introduced OTHER_TEXT_SECTIONS for identifying what
sections could validly have __ex_table entries. Unfortunately, it
wasn't tested with -ffunction-sections, which some architectures
use.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
32-bit and 64-bit ARM use these sections to store executable code, so
they must be whitelisted in modpost's table of valid text sections.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Here's the big char/misc driver patchset for 4.1-rc1.
Lots of different driver subsystem updates here, nothing major, full
details are in the shortlog below.
All of this has been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlU2IMEACgkQMUfUDdst+yloDQCfbyIRL23WVAn9ckQse/y8gbjB
OT4AoKTJbwndDP9Kb/lrj2tjd9QjNVrC
=xhen
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here's the big char/misc driver patchset for 4.1-rc1.
Lots of different driver subsystem updates here, nothing major, full
details are in the shortlog.
All of this has been in linux-next for a while"
* tag 'char-misc-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (133 commits)
mei: trace: remove unused TRACE_SYSTEM_STRING
DTS: ARM: OMAP3-N900: Add lis3lv02d support
Documentation: DT: lis302: update wakeup binding
lis3lv02d: DT: add wakeup unit 2 and wakeup threshold
lis3lv02d: DT: use s32 to support negative values
Drivers: hv: hv_balloon: correctly handle num_pages>INT_MAX case
Drivers: hv: hv_balloon: correctly handle val.freeram<num_pages case
mei: replace check for connection instead of transitioning
mei: use mei_cl_is_connected consistently
mei: fix mei_poll operation
hv_vmbus: Add gradually increased delay for retries in vmbus_post_msg()
Drivers: hv: hv_balloon: survive ballooning request with num_pages=0
Drivers: hv: hv_balloon: eliminate jumps in piecewiese linear floor function
Drivers: hv: hv_balloon: do not online pages in offline blocks
hv: remove the per-channel workqueue
hv: don't schedule new works in vmbus_onoffer()/vmbus_onoffer_rescind()
hv: run non-blocking message handlers in the dispatch tasklet
coresight: moving to new "hwtracing" directory
coresight-tmc: Adding a status interface to sysfs
coresight: remove the unnecessary configuration coresight-default-sink
...
Pull misc kbuild updates:
"This is the remaining part of kbuild stuff for v4.1-rc1:
- One wew coccinelle script and a clarification of the proposed fix
in bugon.coccinelle
- CONFIG_KERNEL_LZ4 support for extract-ikconfig"
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
scripts/coccinelle/misc/bugon.cocci: update bug_on conversion warning
scripts/extract-ikconfig: Support LZ4-compressed images.
irqf_oneshot.cocci: add check of devm_request_threaded_irq()
Pull MIPS updates from Ralf Baechle:
"This is the main pull request for MIPS for Linux 4.1. Most
noteworthy:
- Add more Octeon-optimized crypto functions
- Octeon crypto preemption and locking fixes
- Little endian support for Octeon
- Use correct CSR to soft reset Octeons
- Support LEDs on the Octeon-based DSR-1000N
- Fix PCI interrupt mapping for the Octeon-based DSR-1000N
- Mark prom_free_prom_memory() as __init for a number of systems
- Support for Imagination's Pistachio SOC. This includes arch and
CLK bits. I'd like to merge pinctrl bits later
- Improve parallelism of csum_partial for certain pipelines
- Organize DTB files in subdirs like other architectures
- Implement read_sched_clock for all MIPS platforms other than
Octeon
- Massive series of 38 fixes and cleanups for the FPU emulator /
kernel
- Further FPU remulator work to support new features. This sits on a
separate branch which also has been pulled into the 4.1 KVM branch
- Clean up and fixes for the SEAD3 eval board; remove unused file
- Various updates for Netlogic platforms
- A number of small updates for Loongson 3 platforms
- Increase the memory limit for ATH79 platforms to 256MB
- A fair number of fixes and updates for BCM47xx platforms
- Finish the implementation of XPA support
- MIPS FDC support. No, not floppy controller but Fast Debug Channel :)
- Detect the R16000 used in SGI legacy platforms
- Fix Kconfig dependencies for the SSB bus support"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (265 commits)
MIPS: Makefile: Fix MIPS ASE detection code
MIPS: asm: elf: Set O32 default FPU flags
MIPS: BCM47XX: Fix detecting Microsoft MN-700 & Asus WL500G
MIPS: Kconfig: Disable SMP/CPS for 64-bit
MIPS: Hibernate: flush TLB entries earlier
MIPS: smp-cps: cpu_set FPU mask if FPU present
MIPS: lose_fpu(): Disable FPU when MSA enabled
MIPS: ralink: add missing symbol for RALINK_ILL_ACC
MIPS: ralink: Fix bad config symbol in PCI makefile.
SSB: fix Kconfig dependencies
MIPS: Malta: Detect and fix bad memsize values
Revert "MIPS: Avoid pipeline stalls on some MIPS32R2 cores."
MIPS: Octeon: Delete override of cpu_has_mips_r2_exec_hazard.
MIPS: Fix cpu_has_mips_r2_exec_hazard.
MIPS: kernel: entry.S: Set correct ISA level for mips_ihb
MIPS: asm: spinlock: Fix addiu instruction for R10000_LLSC_WAR case
MIPS: r4kcache: Use correct base register for MIPS R6 cache flushes
MIPS: Kconfig: Fix typo for the r2-to-r6 emulator kernel parameter
MIPS: unaligned: Fix regular load/store instruction emulation for EVA
MIPS: unaligned: Surround load/store macros in do {} while statements
...
Merge third patchbomb from Andrew Morton:
- various misc things
- a couple of lib/ optimisations
- provide DIV_ROUND_CLOSEST_ULL()
- checkpatch updates
- rtc tree
- befs, nilfs2, hfs, hfsplus, fatfs, adfs, affs, bfs
- ptrace fixes
- fork() fixes
- seccomp cleanups
- more mmap_sem hold time reductions from Davidlohr
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (138 commits)
proc: show locks in /proc/pid/fdinfo/X
docs: add missing and new /proc/PID/status file entries, fix typos
drivers/rtc/rtc-at91rm9200.c: make IO endian agnostic
Documentation/spi/spidev_test.c: fix warning
drivers/rtc/rtc-s5m.c: allow usage on device type different than main MFD type
.gitignore: ignore *.tar
MAINTAINERS: add Mediatek SoC mailing list
tomoyo: reduce mmap_sem hold for mm->exe_file
powerpc/oprofile: reduce mmap_sem hold for exe_file
oprofile: reduce mmap_sem hold for mm->exe_file
mips: ip32: add platform data hooks to use DS1685 driver
lib/Kconfig: fix up HAVE_ARCH_BITREVERSE help text
x86: switch to using asm-generic for seccomp.h
sparc: switch to using asm-generic for seccomp.h
powerpc: switch to using asm-generic for seccomp.h
parisc: switch to using asm-generic for seccomp.h
mips: switch to using asm-generic for seccomp.h
microblaze: use asm-generic for seccomp.h
arm: use asm-generic for seccomp.h
seccomp: allow COMPAT sigreturn overrides
...
It might be annoying to constantly see this:
scripts/Makefile.kasan:16: Cannot use CONFIG_KASAN: -fsanitize=kernel-address is not supported by compiler
while performing allmodconfig/allyesconfig build tests.
Disable this warning if CONFIG_COMPILE_TEST=y.
Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 1f65f947a6 ("checkpatch: add checks for question mark and
colon spacing") back in 2008, checkpatch has reported false positive for
asm volatile uses of "::" checkpatch thinks colons should always have
spaces around it.
Add an exception for colons with colons on either side for this valid asm
volatile (and c++) use.
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Yehuda Yitschak <yehuday@marvell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If a patch touches multiple files, the --fix and --fix-inplace option
doesn't keep the proper line count and makes the new patch file not able
to be applied via bad offset line numbers when lines are added or deleted
by the --fix option.
Dunno how that extra backslash snuck in there.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ENOSYS means that a nonexistent system call was called. We have a
bad habit of using it for things like invalid operations on
otherwise valid syscalls. We should avoid this in new code.
Pervasive incorrect usage of ENOSYS came up at the kernel summit ABI
review discussion. Let's see if checkpatch can help.
I'll submit a separate patch for include/uapi/asm-generic/errno.h.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
const objects shouldn't be __read_mostly. They are read-only.
Marking these objects as __read_mostly causes section conflicts with LTO
linking.
So add a test to try to avoid this issue.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Code such as:
x = timercmp(&now, &end, <);
Will currently trigger a checkpatch error. e.g.
ERROR: spaces required around that '<'
This is because the "Ignore operators passed as parameters" check looks
only for a comma following the operator. Improve the check by also
looking for a close parenthesis.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a test for sizeof(foo)/sizeof(foo[0]) that could be ARRAY_SIZE(foo).
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add another struct to the list of normally const struct types
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are #defines with long string constants like:
#define foo "some really long string > 80 columns"
Add a long line exception for them.
Miscellanea:
Use the $String variable for slightly better readability
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Madalin-Cristian Bucur <madalin.bucur@freescale.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit messages lines are sometimes overly long.
Suggest line wrapping at 75 columns so the default git commit log
indentation of 4 plus the commit message text still fits on an 80 column
screen.
Add a checkpatch test for long commit messages lines too.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: David Miller <davem@davemloft.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ian Morris <ipm@chirality.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently checkpatch warns when asm/file.h is included and linux/file.h
exists. That conversion can be made when linux/file.h includes asm/file.h
which is not always the case.(See signal.h)
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Andy Whitcroft <apw@canonical.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using 'const <type> const *' is generally meant to be written 'const
<type> * const'.
Add a test for the miswritten form.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a few conditions to the test to find
return (ERRNO);
Make the output message a bit less cryptic too.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently checkpatch will fuss if one uses world writable settings in
debugfs files and DEVICE_ATTR uses by testing S_IWUGO but not testing
S_IWOTH, S_IRWXUGO or S_IALLUGO.
Extend the check to catch all cases exporting world writable permissions
including octal values.
[akpm@linux-foundation.org: remove stray $]
Signed-off-by: Joe Perches <joe@perches.com>
Original-patch-by: Nicholas Mc Guire <hofrat@osadl.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If a codespell dictionary exists, use it if desired. default is off,
maybe it could be turned on later.
codespell's dictionary format allows multiple possible corrections, ignore
that for now and only use the first suggestion.
Also add \b to spelling test so that consecutive misspelled words
are found properly.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Masanari Iida <standby24x7@gmail.com>
Cc: Lucas De Marchi <lucas.de.marchi@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Only commit log and patch additions are checked for typos and spelling
errors currently. Add a check of the email subject line too.
Signed-off-by: Joe Perches <joe@perches.com>
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Tested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The "no space is necessary after a cast" sizeof exclusion doesn't work
properly.
The test reports a false positive for code like:
BUILD_BUG_ON(sizeof(struct batadv_bla_claim_dst) != 6);
Make it work, simplify the exclusions, and add some comments.
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Use a single source list of hypercalls, generating other tables
etc. at build time.
- Add a "Xen PV" APIC driver to support >255 VCPUs in PV guests.
- Significant performance improve to guest save/restore/migration.
- scsiback/front save/restore support.
- Infrastructure for multi-page xenbus rings.
- Misc fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJVL6OZAAoJEFxbo/MsZsTRs3YH/2AycBHs129DNnc2OLmOklBz
AdD43k+FOfZlv0YU80WmPVmOpGGHGB5Pqkix2KtnvPYmtx3pb/5ikhDwSTWZpqBl
Qq6/RgsRjYZ8VMKqrMTkJMrJWHQYbg8lgsP5810nsFBn/Qdbxms+WBqpMkFVo3b2
rvUZj8QijMJPS3qr55DklVaOlXV4+sTAytTdCiubVnaB/agM2jjRflp/lnJrhtTg
yc4NTrIlD1RsMV/lNh92upBP/pCm6Bs0zQ2H1v3hkdhBBmaO0IVXpSheYhfDOHfo
9v209n137N7X86CGWImFk6m2b+EfiFnLFir07zKSA+iZwkYKn75znSdPfj0KCc0=
=bxTm
-----END PGP SIGNATURE-----
Merge tag 'stable/for-linus-4.1-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen features and fixes from David Vrabel:
- use a single source list of hypercalls, generating other tables etc.
at build time.
- add a "Xen PV" APIC driver to support >255 VCPUs in PV guests.
- significant performance improve to guest save/restore/migration.
- scsiback/front save/restore support.
- infrastructure for multi-page xenbus rings.
- misc fixes.
* tag 'stable/for-linus-4.1-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/pci: Try harder to get PXM information for Xen
xenbus_client: Extend interface to support multi-page ring
xen-pciback: also support disabling of bus-mastering and memory-write-invalidate
xen: support suspend/resume in pvscsi frontend
xen: scsiback: add LUN of restored domain
xen-scsiback: define a pr_fmt macro with xen-pvscsi
xen/mce: fix up xen_late_init_mcelog() error handling
xen/privcmd: improve performance of MMAPBATCH_V2
xen: unify foreign GFN map/unmap for auto-xlated physmap guests
x86/xen/apic: WARN with details.
x86/xen: Provide a "Xen PV" APIC driver to support >255 VCPUs
xen/pciback: Don't print scary messages when unsupported by hypervisor.
xen: use generated hypercall symbols in arch/x86/xen/xen-head.S
xen: use generated hypervisor symbols in arch/x86/xen/trace.c
xen: synchronize include/xen/interface/xen.h with xen
xen: build infrastructure for generating hypercall depending symbols
xen: balloon: Use static attribute groups for sysfs entries
xen: pcpu: Use static attribute groups for sysfs entry
Pull kconfig updates from Michal Marek:
"Here is the kconfig stuff for v4.1-rc1:
- fixes for mergeconfig (used by make kvmconfig/tinyconfig)
- header cleanup
- make -s *config is silent now"
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kconfig: Do not print status messages in make -s mode
kconfig: Simplify Makefile
kbuild: add generic mergeconfig target, %.config
merge_config.sh: rename MAKE to RUNMAKE
merge_config.sh: improve indentation
kbuild: mergeconfig: remove redundant $(objtree)
kbuild: mergeconfig: move an error check to merge_config.sh
kbuild: mergeconfig: fix "jobserver unavailable" warning
kconfig: Remove unnecessary prototypes from headers
kconfig: Remove dead code
kconfig: Get rid of the P() macro in headers
kconfig: fix a misspelling in scripts/kconfig/merge_config.sh
Pull kbuild updates from Michal Marek:
"Here is the first round of kbuild changes for v4.1-rc1:
- kallsyms fix for ARM and cleanup
- make dep(end) removed (developers have no sense of nostalgia these
days...)
- include Makefiles by relative path
- stop useless rebuilds of asm-offsets.h and bounds.h"
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
Kbuild: kallsyms: drop special handling of pre-3.0 GCC symbols
Kbuild: kallsyms: ignore veneers emitted by the ARM linker
kbuild: ia64: use $(src)/Makefile.gate rather than particular path
kbuild: include $(src)/Makefile rather than $(obj)/Makefile
kbuild: use relative path more to include Makefile
kbuild: use relative path to include Makefile
kbuild: do not add $(bounds-file) and $(offsets-file) to targets
kbuild: remove warning about "make depend"
kbuild: Don't reset timestamps in include/generated if not needed
if()/BUG conversion to BUG_ON must be avoided when there's side effect
in condition. The reason being BUG_ON won't execute the condition when
CONFIG_BUG is not defined.
Inspired-by: J. Bruce Fields <bfields@fieldses.org>
Suggested-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Support for kernel image LZ4 compression was added around 3.11, but not
the corresponding kernel .config extraction.
This makes possible extracting the kernel config for LZ4-compressed
kernels you're not running, or the current LZ4-compressed kernel if
compiled without /proc/config.gz support.
Signed-off-by: Alex Pilon <alp+linux@alexpilon.ca>
Signed-off-by: Michal Marek <mmarek@suse.cz>
if()/BUG conversion to BUG_ON must be avoided when there's side effect
in condition. The reason being BUG_ON won't execute the condition when
CONFIG_BUG is not defined.
With inspiration from Bruce Fields.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Suggested-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
struct section_check is used as a generic way of describing what
relocations are authorized/forbidden when running modpost. This commit
tries to describe how each field is used.
Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (Fixed "mist"ake)
__ex_table is a simple table section where each entry is a pair of
addresses - the first address is an address which can fault in kernel
space, and the second address points to where the kernel should jump to
when handling that fault. This is how copy_from_user() does not crash the
kernel if userspace gives a borked pointer for example.
If one of these addresses point to a non-executable section, something is
seriously wrong since it either means the kernel will never fault from
there or it will not be able to jump to there. As both cases are serious
enough, we simply error out in these cases so the build fails and the
developper has to fix the issue.
In case the section is executable, but it isn't referenced in our list of
authorized sections to point to from __ex_table, we just dump a warning
giving more information about it. We do this in case the new section is
executable but isn't supposed to be executed by the kernel. This happened
with .altinstr_replacement, which is executable but is only used to copy
instructions from - we should never have our instruction pointer pointing
in .altinstr_replacement. Admitedly, a proper fix in that case would be to
just set .altinstr_replacement NX, but we need to warn about future cases
like this.
Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (added long casts)
This shell script can be used to sanity check the __ex_table section on an
object file, making sure the relocations in there are pointing to valid
executable sections. If it finds some suspicious relocations, it'll use
addr2line to try and dump where this is coming from.
This works best with CONFIG_DEBUG_INFO.
Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This will be useful when we want to have special handlers which need to go
through more hops to print useful information to the user.
Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
sched.text and .kprobes.text should behave exactly like .text with regards
to how we should warn about referencing sections which might get discarded
at runtime.
Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Prints a warning when a section references a section outside a strict
white-list. This will be useful to print a warning if __ex_table
references a non-executable section.
Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Add an -s option to the various frontends and pass it when make -s is
used. Also, use $(kecho) instead of @echo in the Makefile.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Since we have required at least GCC v3.2 for some time now, we
can drop the special handling of the 'gcc[0-9]_compiled.' label
which is not emitted anymore since GCC v3.0.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
When linking large kernels on ARM, the linker will insert veneers
(i.e., PLT like stubs) when function symbols are out of reach for
the ordinary relative branch/branch-and-link instructions.
However, due to the fact that the kallsyms region sits in .rodata,
which is between .text and .init.text, additional veneers may be
emitted in the second pass due to the fact that the size of the
kallsyms region itself has pushed the .init.text section further
apart, requiring even more veneers.
So ignore the veneers when generating the symbol table. Veneers
have no corresponding source code, and they will not turn up in
backtraces anyway.
This patch also lightly refactors the symbol_valid() function
to use a local 'sym_name' rather than the obfuscated 'sym + 1'
and 'sym + offset'
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
When building specific DTBs out of the kernel tree the vendor subdirs
(boot/dts/<vendor>) are not created, ensure that they are before
building the DTB.
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
This commit actually has no impact because $(src) and $(obj) point
to the same path, but $(src)/Makefile looks better when we include
source files.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The "MAKEFLAGS += --include-dir=$(srctree)" line in the top Makefile
allows us to do this.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Add MIPS Common Device Memory Map (CDMM) support in the form of a bus in
the standard Linux device model. Each device attached via CDMM is
discoverable via an 8-bit type identifier and may contain a number of
blocks of memory mapped registers in the CDMM region. IRQs are expected
to be handled separately.
Due to the per-cpu (per-VPE for MT cores) nature of the CDMM devices,
all the driver callbacks take place from workqueues which are run on the
right CPU for the device in question, so that the driver doesn't need to
be as concerned about which CPU it is running on. Callbacks also exist
for when CPUs are taken offline, so that any per-CPU resources used by
the driver can be disabled so they don't get forcefully migrated. CDMM
devices are created as children of the CPU device they are attached to.
Any existing CDMM configuration by the bootloader will be inherited,
however platforms wishing to enable CDMM should implement the weak
mips_cdmm_phys_base() function (see asm/cdmm.h) so that the bus driver
knows where it should put the CDMM region in the physical address space
if the bootloader hasn't already enabled it.
A mips_cdmm_early_probe() function is also provided to allow early boot
or particularly low level code to set up the CDMM region and probe for a
specific device type, for example early console or KGDB IO drivers for
the EJTAG Fast Debug Channel (FDC) CDMM device.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/9599/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Since commit 1c6c69525b ("genirq: Reject
bogus threaded irq requests") threaded IRQs without a primary handler
need to be requested with IRQF_ONESHOT, otherwise the request will fail.
Until now, this coccinelle script only checked request_threaded_irq().
However, the counterpart devm function (see kernel/irq/devres.c) is also
affected by the missing flag which can be detected with this patch.
Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
"scripts/kconfig/merge_config.sh && make oldconfig" works well
enough for merging local config fragments, but Kbuild currently has
the entry points only for "kvmconfig" and "tinyconfig".
This commit provides the generic target for mergeconfig, so we can
manage our own config fragments easily:
put "foo.config" in arch/$(SRCARCH)/configs/ or kernel/configs/,
and then run "make foo.config".
Now "make kvmconfig" is just a shorthand of "make kvm_guest.config".
Likewise, "make tinyconfig" is equivalent to
"make allnoconfig tiny.config".
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The variable "MAKE" is used to store the command name that has
invoked the Makefile. (Actually, it is already set to "make"
if you run this script from a Makefile.)
In this script, however, it is used to determine if Make should be
run or not. It is not what we usually expect.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
It is true that we do not want to move the code too far to the
right, but something like below is not preferred:
if [ "x$PREV_VAL" != "x$NEW_VAL" ] ; then
echo Value of $CFG is redefined by fragment $MERGE_FILE:
echo Previous value: $PREV_VAL
echo New value: $NEW_VAL
echo
elif [ "$WARNREDUN" = "true" ]; then
echo Value of $CFG is redundant by fragment $MERGE_FILE:
fi
To fix this, call "continue" if the "grep" command fails to find the
given CONFIG.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Maninder Singh