Defconfig additions, removals, etc. Most of these are small changes adding
the options for newly upstreamed drivers, or drivers needed for new board
support. Nothing specifically sticks out this time.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=0DnU
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"Defconfig additions, removals, etc. Most of these are small changes
adding the options for newly upstreamed drivers, or drivers needed for
new board support. Nothing specifically sticks out this time"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits)
ARM: multi_v7_defconfig: enable CONFIG_EFI
ARM: multi_v7_defconfig: Build Atmel maXTouch driver as a module
ARM: defconfig: update the Integrator defconfig
ARM: keystone: defconfig: Fix USB configuration
ARM: imx_v6_v7_defconfig: Select the wm8960 codec driver
ARM: omap2plus_defconfig: switch to the IIO BMP085 driver
ARM: mvebu_v5_defconfig: use MV88E6XXX
ARM: davinci_all_defconfig: Enable some UBI modules
ARM: davinci_all_defconfig: Enable AEMIF as a module
ARM: multi_v7_defconfig: Enable SECCOMP
ARM: exynos_defconfig: Enable SECCOMP
ARM: imx_v6_v7_defconfig: Add CONFIG_MPL3115
ARM: imx_v6_v7_defconfig: Enable GPU support
ARM: s3c2410_defconfig: Remove CONFIG_IPV6_PRIVACY
ARM: exynos_defconfig: Enable PM_DEBUG
ARM: exynos_defconfig: Enable bus frequency scaling with devfreq
ARM: imx_v6_v7_defconfig: enable more USB configurations
ARM: davinci_all_defconfig: enable SMSC ethernet PHY
ARM: davinci_all_defconfig: enable RTC driver as module
ARM: multi_v7_defconfig: Enable ARM_IMX6Q_CPUFREQ
...
These are updates for platform specific code on 32-bit ARM machines,
essentially anything that can not (yet) be expressed using DT files.
Noteworthy changes include:
- We get support for running in big-endian mode on two platforms:
sunxi (Allwinner) and s3c24xx (old Samsung).
- The recently added Uniphier platform now uses standard PSCI
methods for SMP booting and we remove support for old bootloader
versions that did not support it yet.
- In sunxi, we gain support for the "Nextthing GR8" SoC, which
is a close relative of the Allwinner A13 and R8 chips.
- PXA completes its move over to the generic dmaengine framework
and removes its old private API
- mach-bcm gains support for BCM47189/BCM53573, their first ARM
SoC with integrated 802.11ac wireless networking.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=y4XF
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Arnd Bergmann:
"These are updates for platform specific code on 32-bit ARM machines,
essentially anything that can not (yet) be expressed using DT files.
Noteworthy changes include:
- We get support for running in big-endian mode on two platforms:
sunxi (Allwinner) and s3c24xx (old Samsung).
- The recently added Uniphier platform now uses standard PSCI methods
for SMP booting and we remove support for old bootloader versions
that did not support it yet.
- In sunxi, we gain support for the "Nextthing GR8" SoC, which is a
close relative of the Allwinner A13 and R8 chips.
- PXA completes its move over to the generic dmaengine framework and
removes its old private API
- mach-bcm gains support for BCM47189/BCM53573, their first ARM SoC
with integrated 802.11ac wireless networking"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
ARM: imx legacy: pca100: move peripheral initialization to .init_late
ARM: imx legacy: mx27ads: move peripheral initialization to .init_late
ARM: imx legacy: mx21ads: move peripheral initialization to .init_late
ARM: imx legacy: pcm043: move peripheral initialization to .init_late
ARM: imx legacy: mx35-3ds: move peripheral initialization to .init_late
ARM: imx legacy: mx27-3ds: move peripheral initialization to .init_late
ARM: imx legacy: imx27-visstrim-m10: move peripheral initialization to .init_late
ARM: imx legacy: vpr200: move peripheral initialization to .init_late
ARM: imx legacy: mx31moboard: move peripheral initialization to .init_late
ARM: imx legacy: armadillo5x0: move peripheral initialization to .init_late
ARM: imx legacy: qong: move peripheral initialization to .init_late
ARM: imx legacy: mx31-3ds: move peripheral initialization to .init_late
ARM: imx legacy: pcm037: move peripheral initialization to .init_late
ARM: imx legacy: mx31lilly: move peripheral initialization to .init_late
ARM: imx legacy: mx31ads: move peripheral initialization to .init_late
ARM: imx legacy: mx31lite: move peripheral initialization to .init_late
ARM: imx legacy: kzm: move peripheral initialization to .init_late
MAINTAINERS: update list of Oxnas maintainers
ARM: orion5x: remove extraneous NO_IRQ
ARM: orion: simplify orion_ge00_switch_init
...
The cleanups for v4.9 are a little larger that usual, but thankfully
that is almost exclusively due to removing a significant number of
files that have become obsolete after the still ongoing conversion
of old board files to devicetree.
- for mach-omap2, which is still the largest platform in arch/arm/,
the conversion to DT is finally complete after the Nokia N900 is
now fully supported there, along with the omap3 LDP, and we can
remove those two board files.
If no regressions are found, another large cleanup for the platform
will happen as a follow-up, removing dead code and restructuring
the platform based on being DT-only.
- In mach-imx, similar work is ongoing, but has not come that far.
This time, we remove the obsolete board file for the i.MX1
generation, which like i.MX25, i.MX5, i.MX6, and i.MX7 is now DT-only.
The remaining board files are for i.MX2 and i.MX3 machines
based on old ARM926 or ARM1136 cores that should work with DT
in principle.
- realview has just been converted from board files to DT, and a lot
of code gets removed in the process. This is the last
ARM/Keil/Versatile derived platform that was still using board
files, the other ones being integrator, versatile and vexpress.
We can probably merge the remaining code into a single directory
in the near future.
- clps711x had completed the conversion in v4.8, but we accidentally
left the files in place that should have been deleted then.
Conflicts: two files deleted here have been modified upstream,
the changes can be discarded.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=WaLy
-----END PGP SIGNATURE-----
Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Arnd Bergmann:
"The cleanups for v4.9 are a little larger that usual, but thankfully
that is almost exclusively due to removing a significant number of
files that have become obsolete after the still ongoing conversion of
old board files to devicetree.
- for mach-omap2, which is still the largest platform in arch/arm/,
the conversion to DT is finally complete after the Nokia N900 is
now fully supported there, along with the omap3 LDP, and we can
remove those two board files. If no regressions are found, another
large cleanup for the platform will happen as a follow-up, removing
dead code and restructuring the platform based on being DT-only.
- In mach-imx, similar work is ongoing, but has not come that far.
This time, we remove the obsolete board file for the i.MX1
generation, which like i.MX25, i.MX5, i.MX6, and i.MX7 is now
DT-only. The remaining board files are for i.MX2 and i.MX3 machines
based on old ARM926 or ARM1136 cores that should work with DT in
principle.
- realview has just been converted from board files to DT, and a lot
of code gets removed in the process. This is the last
ARM/Keil/Versatile derived platform that was still using board
files, the other ones being integrator, versatile and vexpress. We
can probably merge the remaining code into a single directory in
the near future.
- clps711x had completed the conversion in v4.8, but we accidentally
left the files in place that should have been deleted then"
* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
ARM: select PCI_DOMAINS config from ARCH_MULTIPLATFORM
ARM: stop *MIGHT_HAVE_PCI* config from being selected redundantly
ARM: imx: (trivial) fix typo and grammar
ARM: clps711x: remove extraneous files
ARM: imx: use IS_ENABLED() instead of checking for built-in or module
ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module
ARM: OMAP1: use IS_ENABLED() instead of checking for built-in or module
ARM: imx: remove platform-mxc_rnga
ARM: realview: imply device tree boot
ARM: realview: no need to select SMP_ON_UP explicitly
ARM: realview: delete the RealView board files
ARM: imx: no need to select SMP_ON_UP explicitly
ARM: i.MX: Move SOC_IMX1 into 'Device tree only'
ARM: i.MX: Remove i.MX1 non-DT support
ARM: i.MX: Remove i.MX1 Synertronixx SCB9328 board support
ARM: i.MX: Remove i.MX1 Armadeus APF9328 board support
ARM: mxs: remove obsolete startup code for TX28
ARM: i.MX31 iomux: remove duplicates with alternate name
ARM: i.MX31 iomux: remove plain duplicates
ARM: OMAP2+: Drop legacy board file for LDP
...
* pm-cpufreq: (24 commits)
cpufreq: st: add missing \n to end of dev_err message
cpufreq: kirkwood: add missing \n to end of dev_err messages
cpufreq: CPPC: Avoid overflow when calculating desired_perf
cpufreq: ti: Use generic platdev driver
cpufreq: intel_pstate: Add io_boost trace
cpufreq: intel_pstate: Use IOWAIT flag in Atom algorithm
cpufreq: schedutil: Add iowait boosting
cpufreq / sched: SCHED_CPUFREQ_IOWAIT flag to indicate iowait condition
cpufreq: CPPC: Force reporting values in KHz to fix user space interface
cpufreq: create link to policy only for registered CPUs
intel_pstate: constify local structures
cpufreq: dt: Support governor tunables per policy
cpufreq: dt: Update kconfig description
cpufreq: dt: Remove unused code
MAINTAINERS: Add Documentation/cpu-freq/
cpufreq: dt: Add support for r8a7792
cpufreq / sched: ignore SMT when determining max cpu capacity
cpufreq: Drop unnecessary check from cpufreq_policy_alloc()
ARM: multi_v7_defconfig: Don't attempt to enable schedutil governor as module
ARM: exynos_defconfig: Don't attempt to enable schedutil governor as module
...
The Exynos MIPI driver does not work anymore (it is board file only) so
it is removed. Remove also config options.
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Donghwa Lee <dh09.lee@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
This enables CONFIG_EFI for multi_v7_defconfig, which adds support for
booting via EFI, and for the EFI framebuffer as builtin options. It
also enables the EFI rtc, the EFI variable pseudo-filesystem and the
EFI capsule loader as modules.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Drop i.MX1 board files and make i.MX1 a DT only platform.
- Remove obsolete ENET initialization code for TX28 board, since FEC
driver handles those setup well now.
- A couple of cleanups on i.MX31 IOMUX headers to drop duplications
- A few other random and trivial cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJX1k9/AAoJEFBXWFqHsHzOcXoH/1OqY6dSOI7MrzwocYhXE+mI
eqgQ/5/N3EsaA01NQpdreffGfa1FlNwIwZ6+9XY4EateQt2U/dPKWX0xDkMpo8c+
CNOciiZ4bZ811w+7NfYiEZ0BTIm2ouFuNJLbadPb6tl+0ssUGvEEelH/UbMjT331
DkzMWaqOv6W2ldKT++UF+IrDCGVUI55leqM5WrQDK8qFkBn6KdnYeFG3+4P58hZ3
XhXuv00UJUxB1L1E3TPG+1MVxDD8G5ge4ZXtIxzECgyAbAbQboyNkXai+qcr4dN9
XIleT0YCYtXSEsvEkfWoU3GjZC9pSZmUFhmlWtWmkuFh9H2zAalRZKNVEBNGpQQ=
=qHgE
-----END PGP SIGNATURE-----
Merge tag 'imx-cleanup-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/cleanup
Pull "i.MX cleanup for 4.9" from Shawn Guo:
- Drop i.MX1 board files and make i.MX1 a DT only platform.
- Remove obsolete ENET initialization code for TX28 board, since FEC
driver handles those setup well now.
- A couple of cleanups on i.MX31 IOMUX headers to drop duplications
- A few other random and trivial cleanups
* tag 'imx-cleanup-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx: (trivial) fix typo and grammar
ARM: imx: use IS_ENABLED() instead of checking for built-in or module
ARM: imx: remove platform-mxc_rnga
ARM: imx: no need to select SMP_ON_UP explicitly
ARM: i.MX: Move SOC_IMX1 into 'Device tree only'
ARM: i.MX: Remove i.MX1 non-DT support
ARM: i.MX: Remove i.MX1 Synertronixx SCB9328 board support
ARM: i.MX: Remove i.MX1 Armadeus APF9328 board support
ARM: mxs: remove obsolete startup code for TX28
ARM: i.MX31 iomux: remove duplicates with alternate name
ARM: i.MX31 iomux: remove plain duplicates
Simply enabling CONFIG_KEYSTONE_USB_PHY doesn't work anymore
as it depends on CONFIG_NOP_USB_XCEIV. We need to enable
that as well.
This fixes USB on Keystone boards from v4.8-rc1 onwards.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This cycle is covering :
- the removal of the legacy DMA API
This is the major contributor to the negative diffstat, as dmaengine
have taken over in this area.
- IDE subsystem defconfig fixes
- preparation for pxa25x to be device-tree compliant
- various irq related fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=kAKB
-----END PGP SIGNATURE-----
Merge tag 'pxa-for-4.9' of https://github.com/rjarzmik/linux into next/soc
Pull "This is the pxa changes for v4.9 cycle" from Robert Jarzmik:
This cycle is covering :
- the removal of the legacy DMA API
This is the major contributor to the negative diffstat, as dmaengine
have taken over in this area.
- IDE subsystem defconfig fixes
- preparation for pxa25x to be device-tree compliant
- various irq related fixes
* tag 'pxa-for-4.9' of https://github.com/rjarzmik/linux:
ARM: pxa: pxa_cplds: fix interrupt handling
ARM: pxa: remove irq init from dt machines
ARM: pxa: Use kmalloc_array() in pxa_pm_init()
ARM: pxa: magician: Remove duplicated I2C pins declaration
ARM: pxa: fix GPIO double shifts
arm: trizeps4_defconfig: disable IDE subsystem
arm: pxa255-idp_defconfig: disable IDE subsystem
arm: lpda270_defconfig: disable IDE subsystem
arm: colibri_pxa270_defconfig: disable IDE subsystem
ARM: pxa: add pxa25x device-tree support
ARM: pxa: prepare pxa25x interrupts for device-tree platforms
ARM: pxa: remove platform dma code
ARM: pxa: remove devicetree boards from pxa_defconfig
- Enable i.MX6 SATA and cpufreq driver support in multi_v7_defconfig.
- Enable MPL3115, Etnaviv GPU, WM8960 Codec driver and more USB
functions support in imx_v6_v7_defconfig.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJX1lztAAoJEFBXWFqHsHzOIdcIALyc4nkJXR1XYYTfL7h+KkgC
YozZ7dX2JyU4n+lYtRz1wLc9SANUu3Of6Ecipk+Y7Djnen0G5Qet6rP5NXzFwmVM
gy5OwctXUaWv7muynLf3SIFyFZ5b+mKwO2n2b/88E5mbSEUXskD/b8lYm/i4XHeJ
Ev3NfAaKo5eDCA39VNsNuD8XkC9wz5CaHbQNCR3hBmHUo9Fjh2eMcloy7/zcbXE9
tVIrZrIzge7l9s5UE1gMYvChQKPE/3tQRhS7NlqFAM4zQfbhQYN1UjibZfoizlMi
jWQxpjZo5VsVOZ1uHPPjdMbjOVHfnUWkSV/l6AAmo4Mnftt83Y3fFxQ+jPHIWgY=
=/Z7R
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig
Merge "i.MX defconfig updates for 4.9" from Shawn Guo:
- Enable i.MX6 SATA and cpufreq driver support in multi_v7_defconfig.
- Enable MPL3115, Etnaviv GPU, WM8960 Codec driver and more USB
functions support in imx_v6_v7_defconfig.
* tag 'imx-defconfig-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Select the wm8960 codec driver
ARM: imx_v6_v7_defconfig: Add CONFIG_MPL3115
ARM: imx_v6_v7_defconfig: Enable GPU support
ARM: imx_v6_v7_defconfig: enable more USB configurations
ARM: multi_v7_defconfig: Enable ARM_IMX6Q_CPUFREQ
ARM: multi_v7_defconfig: Enable AHCI_IMX
- update dsa config with new symbol
- add flash related config for mvebu v7
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlfMQVUACgkQCwYYjhRyO9XsjwCfXdMXmR+QEF+zFB/K/Z5E2BWO
RFYAnRWBOjELgMuH1Q14Sw8ANEj1H5/A
=ZV+v
-----END PGP SIGNATURE-----
Merge tag 'mvebu-defconfig-4.9-1' of git://git.infradead.org/linux-mvebu into next/defconfig
Pull "mvebu defconfig for 4.9 (part 1)" from Gregory CLEMENT:
- update dsa config with new symbol
- add flash related config for mvebu v7
* tag 'mvebu-defconfig-4.9-1' of git://git.infradead.org/linux-mvebu:
ARM: mvebu_v5_defconfig: use MV88E6XXX
ARM: mvebu: enable UBI and UBIFS in mvebu_v7_defconfig
ARM: mvebu: enable MTD command line partition table in mvebu_v7_defconfig
Keystone usb phy needs CONFIG_NOP_USB_XCEIV to be enabled.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=jzCV
-----END PGP SIGNATURE-----
Merge tag 'keystone_config_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/defconfig
Pull "ARM: config: Add CONFIG_NOP_USB_XCEIV" from Santosh Shilimkar:
Keystone usb phy needs CONFIG_NOP_USB_XCEIV to be enabled.
* tag 'keystone_config_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: keystone: defconfig: Fix USB configuration
defconfigs.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=So6k
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-schedutil-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into pm-cpufreq-sched
The schedutil cpufreq governor will be switched from tristate to bool. Fix
defconfigs.
* tag 'samsung-defconfig-schedutil-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: multi_v7_defconfig: Don't attempt to enable schedutil governor as module
ARM: exynos_defconfig: Don't attempt to enable schedutil governor as module
generic IIO BMP280 driver instead of the BMP085.
-----BEGIN PGP SIGNATURE-----
iQIuBAABCAAYBQJXyEuvERx0b255QGF0b21pZGUuY29tAAoJEBvUPslcq6Vz6EQP
/2z/gH28OwmhS6HoScrZqIbY+aojTgjk+tUBpPeEY3rfaEQYX459bNAw1eUfbgex
Bw1BFqwG2S4ETKs0Yf5YSQ9ctgfCkNfINmVMTLRcP0A0ZhkixGRIZ4Rax8WhilAx
8NdKhndEiprUunGbuCAI4cjhdhZsxql6yn5YmSQpW/D/TYyd+e28pLqH/ZQOdmkU
+kyw0m5UBd8CiN763D1WyG7XL7jrfH8BwvkeVDJAW63sm8aJxG5vtWRR1TRjal8d
T2EIu5gEyqYdG4b2l7iR+vlqBSAQen6aNGN5yNYNtAFz2D3FYBsOev83Dz8FiN7Z
+PdvlwbURuu/IK4+glvJfHPXTDqP9gh+zOa9GijkpRhCJ28zkL7wUDBq++1yVCUV
nGWa6DX0Gbb1n0CcplRSflwC2nNTERArLE6Db2erzdVOzjIkdrGsdzjyK3nJZ8Kw
uvYteBtQASLILS2jR5TDgKuA0DbMN1y94Y1i2VkK3hE85CHsx66/LVL3UC61GSM3
XuidS/dIxizW1xx1S/9UZnBppZNj4m+wOWlC5afXrw1ONZEjtE88i/FEpY+iRK22
UhTjtt6KpRcyPrTYx6KiEktwM8HF0nx/7thiMY8wDBC0Gyh7BKFOL1jc0TViVNgD
zre9BdiLamh16KBjrDMYdrRlxkczpR+4yCVGTeq98LGI
=XyS9
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.9/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig
Merge "omap defconfig updates for v4.9 merge window" from Tony Lindgren:
A patch from Linus Walleij <linus.walleij@linaro.org> to switch to use
generic IIO BMP280 driver instead of the BMP085.
* tag 'omap-for-v4.9/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: switch to the IIO BMP085 driver
1. Device dynamic frequency and voltage scalling is now supported
on many Exynos boards, enable it.
2. Enable PM_DEBUG, cleanup old IPV6_PRIVACY.
3. Enable SECCOMP for Systemd on Arch.
4. cpufreq schedutil cannot be module anymore.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2fYj
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig
Merge "Samsung defconfig update for v4.9" from Krzysztof Kozlowski:
1. Device dynamic frequency and voltage scalling is now supported
on many Exynos boards, enable it.
2. Enable PM_DEBUG, cleanup old IPV6_PRIVACY.
3. Enable SECCOMP for Systemd on Arch.
4. cpufreq schedutil cannot be module anymore.
* tag 'samsung-defconfig-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: multi_v7_defconfig: Don't attempt to enable schedutil governor as module
ARM: exynos_defconfig: Don't attempt to enable schedutil governor as module
ARM: multi_v7_defconfig: Enable SECCOMP
ARM: exynos_defconfig: Enable SECCOMP
ARM: s3c2410_defconfig: Remove CONFIG_IPV6_PRIVACY
ARM: exynos_defconfig: Enable PM_DEBUG
ARM: exynos_defconfig: Enable bus frequency scaling with devfreq
savedefconfig and enabling various commonly used
drivers as modules.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=APJu
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.9/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig
Merge "DaVinci defconfig updates for v4.9" from Sekhar Nori:
DaVinci defconfig updates include cleanup using
savedefconfig and enabling various commonly used
drivers as modules.
* tag 'davinci-for-v4.9/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci_all_defconfig: Enable some UBI modules
ARM: davinci_all_defconfig: Enable AEMIF as a module
ARM: davinci_all_defconfig: enable SMSC ethernet PHY
ARM: davinci_all_defconfig: enable RTC driver as module
ARM: davinci_all_defconfig: enable DA850 audio as modules
ARM: davinci_all_defconfig: cleanup with savedefconfig
The driver is for a trackpad device so is not needed for booting and
makes more sense to have it as module to reduce the kernel image size.
It was probably enabled as built-in because module autoload was not
working when the I2C device was registered by OF but this got fixed
in commit b7d21058b4 ("Input: atmel_mxt_ts - add maxtouch to I2C
table for module autoload") so it's safe to enable as a module now.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Integrators defconfig have changed due to changes in
Kconfig for the CPU types, they use the physmap OF NOR
driver and syscon for LEDs.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Simply enabling CONFIG_KEYSTONE_USB_PHY doesn't work anymore
as it depends on CONFIG_NOP_USB_XCEIV. We need to enable
that as well.
This fixes USB on Keystone boards from v4.8-rc1 onwards.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Select CONFIG_SND_SOC_WM8960 so that we can have audio functional
by default on imx6ul-evk and imx7-sdb boards.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This alters the OMAP2plus defconfig to use the IIO BMP280
driver, which is compatible with the BMP085 instead of the old
BMP085-specific misc driver. The IIO driver nowadays have all
the features of the old driver and more.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This enables UBI+UBIFS to handle the NAND MTDs, including the useful
MTD_UBI_BLOCK.
Signed-off-by: Karl Beldan <kbeldan@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The schedutil CPUFreq governor could be built as a module but the change
"cpufreq / sched: Pass flags to cpufreq_update_util()" made it
non-modular so attempting to enable as module leads to a warning:
warning: symbol value 'm' invalid for CPU_FREQ_GOV_SCHEDUTIL
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The schedutil CPUFreq governor could be built as a module but the change
"cpufreq / sched: Pass flags to cpufreq_update_util()" made it
non-modular so attempting to enable as module leads to a warning:
warning: symbol value 'm' invalid for CPU_FREQ_GOV_SCHEDUTIL
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This enables the use of the memory/ti-aemif.c driver.
ATM most davinci boards use the mach-davinci aemif code which gets in
the way of genericity and proper DT boot.
Signed-off-by: Karl Beldan <kbeldan@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Systemd already supports seccomp. It seems some distros are building
systemd with seccomp, e.g. Arch on ARM, thus leading to boot errors:
systemd-logind.service: Failed at step SECCOMP spawning /usr/lib/systemd/systemd-logind: Invalid argument
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Systemd already supports seccomp. It seems some distros are building
systemd with seccomp, e.g. Arch on ARM, thus leading to boot errors:
systemd-logind.service: Failed at step SECCOMP spawning /usr/lib/systemd/systemd-logind: Invalid argument
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Add MPL3115 NXP pressure sensor configuration.
This sensor is used by warp7 board.
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Select CONFIG_DRM_ETNAVIV, so that GPU support can be enabled by default.
Generated by manually selecting CONFIG_DRM_ETNAVIV and
then running:
make savedefconfig
cp defconfig arch/arm/configs/imx_v6_v7_defconfig
,which results in additional cleanup.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Option is long gone, see
5d9efa7ee9 ("ipv6: Remove privacy config option.")
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
PM_DEBUG and PM_ADVANCED_DEBUG bring some information useful for
development and they should not cause any significant overhead. Enable
them in default configuration so debugging would be slightly easier.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Kukjin Kim <kgene@kernel.org>
This patch enables the bus frequency scaling driver with devfreq and
devfreq-event framework. Devfreq is already supported on Odroid U3/XU3,
Trats2 and Rinato/Monk boards.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[k.kozlowski: Don't enable symbols already selected, adjust commit msg]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
This patch moves SOC_IMX1 into 'Device tree only' category and renames
imx1-dt.c to mach-imx1.c to align with the name schema of other
i.MX DT only platforms.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Synertronixx SCB9328 board is very similar to Armadeus APF9328,
so it can be easily reimplemented in DT way.
This patch removes support for non-DT support for this board.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
mach-apf9328.c can be replaced with devicetree equivalent: imx1-apf9328.dts,
so remove the board file.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- USB test module
- USB gadget functions using configfs which are just ready within
several release cycles.
- USB audio gadget
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The LCDK embeds a LAN8710.
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Karl Beldan <kbeldan@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This driver handles the RTC of most davinci SoCs.
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Karl Beldan <kbeldan@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This patch disables deprecated IDE subsystem in trizeps4_defconfig
(ide-cs host driver is selected in this config but pata_pcmcia
libata PATA host driver is also selected so ide-cs is redundant
and can be disabled together with the whole IDE subsystem).
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
This patch disables deprecated IDE subsystem in pxa255-idp_defconfig
(no IDE host drivers are selected in this config so there is no valid
reason to enable IDE subsystem itself).
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
This patch disables deprecated IDE subsystem in lpd270_defconfig
(no IDE host drivers are selected in this config so there is no
valid reason to enable IDE subsystem itself).
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
This patch disables deprecated IDE subsystem in colibri_pxa270_defconfig
(no IDE host drivers are selected in this config so there is no valid
reason to enable IDE subsystem itself).
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
If both legacy and device-tree machines are mixed in the same defconfig,
the legacy boards don't boot up anymore with gpio request deferral
errors.
This is seen when attempting to run akita, borzoi, spitz, terrier, or
tosa in qemu with pxa_defconfig.
The real reason behind is that gpio handling for pxa in its current
state cannot be built for _both_ a devicetree machine (ie. pxa-dt.c) and
a non devicetree machine (ie. corgi, tosa, ...).
This is turn is because for devicetree a pinctrl is enforced for the
machine, and a pinctrl driver is required. If it's not available,
pxa_gpio_request() fails on pinctrl_request_gpio() and returns
-EPROBE_DEFER. It was introduced by commit f806dac593
("ARM: pxa: activate pinctrl for device-tree machines").
Now the true chicken and egg problem is than machine files,
ie. arch/arm/mach-pxa/xxx.c are using gpio before the drivers are
probed, in the init_machine() function, and that's why pinctrl/gpio for
legacy machine files is a bit difficult.
As for now, to keep the compilation coverage and testing of legacy
machines, this patch removes the 2 devicetree machines from
pxa_defconfig.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Tested-by: Guenter Roeck <linux@roeck-us.net>
The Wandboard Quad can make use of the cpufreq support provided by the
driver. Enable it and its dependency, REGULATOR_ANATOP, by default.
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Wandboard Quad comes with a SATA port. Enable the IMX SATA driver by
default to make it easy to have the root filesystem on it.
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
UBIFS is commonly used on Marvell EBU v7 platforms to store the root
file-system, so it makes sense to have those options enabled by default
in mvebu_v7_defconfig.
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Linus Torvalds