Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We have a bunch of fixes for aacraid, a set of coherency fixes that
only affect non-coherent platforms and one coccinelle detected null
check after use.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=boPv
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"A bunch of fixes for aacraid, a set of coherency fixes that only
affect non-coherent platforms and one coccinelle detected null check
after use"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: libsas: align sata_device's rps_resp on a cacheline
scsi: use dma_get_cache_alignment() as minimum DMA alignment
scsi: dma-mapping: always provide dma_get_cache_alignment
scsi: ufs: ufshcd: fix potential NULL pointer dereference in ufshcd_config_vreg
scsi: aacraid: Prevent crash in case of free interrupt during scsi EH path
scsi: aacraid: Perform initialization reset only once
scsi: aacraid: Check for PCI state of device in a generic way
fix for a regression in iWarp if SELinux is enabled, a fix for a compilation
regression introduced in this merge window, and one obscure kconfig
combination that oops's the kernel.
For drivers, we have hns fixes needed to make their devices work on certain
ARM IOMMU configurations, a stack data leak for hfi1, and various testing
discovered -rc bug fixes for i40iw.
This cycle we pushed back on the driver maintainers to have better commit
messages for -rc material.
You may need to pull my latest PGP key from the GPG key servers for this, I am
not certain if the subkey update will make it to kernel.org's WKD before you
need it.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=YaUB
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Here is the first rc pull request for RDMA. This includes an important
core fix for a regression in iWarp if SELinux is enabled, a fix for a
compilation regression introduced in this merge window, and one
obscure kconfig combination that oops's the kernel.
For drivers, we have hns fixes needed to make their devices work on
certain ARM IOMMU configurations, a stack data leak for hfi1, and
various testing discovered -rc bug fixes for i40iw.
This cycle we pushed back on the driver maintainers to have better
commit messages for -rc material"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/core: Only enforce security for InfiniBand
RDMA/hns: Get rid of page operation after dma_alloc_coherent
RDMA/hns: Get rid of virt_to_page and vmap calls after dma_alloc_coherent
RDMA/hns: Fix the issue of IOVA not page continuous in hip08
IB/core: Init subsys if compiled to vmlinuz-core
RDMA/cma: Make sure that PSN is not over max allowed
i40iw: Notify user of established connection after QP in RTS
i40iw: Move MPA request event for loopback after connect
i40iw: Correct ARP index mask
i40iw: Do not free sqbuf when event is I40IW_TIMER_TYPE_CLOSE
i40iw: Allocate a sdbuf per CQP WQE
IB: INFINIBAND should depend on HAS_DMA
IB/hfi1: Initialize bth1 in 16B rc ack builder
Here are some small misc driver fixes for 4.15-rc3 to resolve reported
issues. Specifically these are:
- binder fix for a memory leak
- vpd driver fixes for a number of reported problems
- hyperv driver fix for memory accesses where it shouldn't be.
All of these have been in linux-next for a while. There's also one more
MAINTAINERS file update that came in today to get the Android
developer's emails correct, which is also in this pull request, that was
not in linux-next, but should not be an issue.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWia6IQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykaKwCgx1lw4qMmetUzjKBX+OMgEkFZo3UAoIL/DLiB
ZyMb52XWdP0pScSsFUyn
=riSs
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are some small misc driver fixes for 4.15-rc3 to resolve reported
issues. Specifically these are:
- binder fix for a memory leak
- vpd driver fixes for a number of reported problems
- hyperv driver fix for memory accesses where it shouldn't be.
All of these have been in linux-next for a while. There's also one
more MAINTAINERS file update that came in today to get the Android
developer's emails correct, which is also in this pull request, that
was not in linux-next, but should not be an issue"
* tag 'char-misc-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
MAINTAINERS: update Android driver maintainers.
firmware: vpd: Fix platform driver and device registration/unregistration
firmware: vpd: Tie firmware kobject to device lifetime
firmware: vpd: Destroy vpd sections in remove function
hv: kvp: Avoid reading past allocated blocks from KVP file
Drivers: hv: vmbus: Fix a rescind issue
ANDROID: binder: fix transaction leak.
Here are 3 small fixes for some reported issues:
- a debugfs build error that lots of people have reported
- a Kconfig help text cleanup now that the firmware is not in
the kernel tree
- a isa bus bug fix for a reported issue that has been there
since 2.6.18.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWia7Ag8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymIZACePFa9lQwqJpxToCCm0Z2Yi1x50f0AoNP6TI9g
mkCgELuNi6QdhvFYIVjW
=8HAh
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are 3 small fixes for some reported issues:
- a debugfs build error that lots of people have reported
- a Kconfig help text cleanup now that the firmware is not in the
kernel tree
- an ISA bus bug fix for a reported issue that has been there since
2.6.18.
All of these have been in linux-next with no reported issues"
* tag 'driver-core-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
firmware: cleanup FIRMWARE_IN_KERNEL message
isa: Prevent NULL dereference in isa_bus driver callbacks
debugfs: fix debugfs_real_fops() build error
Here are a number of small staging and iio driver fixes for reported
issues for 4.15-rc3. Nothing major here, the majority is IIO issues,
like normal, but there are also some small bugfixes for a few staging
drivers as well.
Full details are in the shortlog.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWia7tQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylHgACeNtnYUpuwRUI6K3JOxxClDVUzVRUAn22oMDn7
UlkqSVX7hMeC5jEvO8yj
=k+Ek
-----END PGP SIGNATURE-----
Merge tag 'staging-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and iio driver fixes from Greg KH:
"Here are a number of small staging and iio driver fixes for reported
issues for 4.15-rc3. Nothing major here, the majority is IIO issues,
like normal, but there are also some small bugfixes for a few staging
drivers as well.
Full details are in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: stm32: fix adc/trigger link error
iio: health: max30102: Temperature should be in milli Celsius
iio: fix kernel-doc build errors
iio: adc: meson-saradc: Meson8 and Meson8b do not have REG11 and REG13
iio: adc: meson-saradc: initialize the bandgap correctly on older SoCs
iio: adc: meson-saradc: fix the bit_idx of the adc_en clock
iio: proximity: sx9500: Assign interrupt from GpioIo()
iio: adc: cpcap: fix incorrect validation
staging: octeon-usb: use __delay() instead of cvmx_wait()
staging: rtl8188eu: Fix incorrect response to SIOCGIWESSID
staging: ccree: fix leak of import() after init()
staging: comedi: ni_atmio: fix license warning.
Here are some small serdev and serial fixes for 4.15-rc3. They resolve
some reported problems:
- a number of serdev fixes to resolve crashes
- MIPS build fixes for their serial port
- a new 8250 device id
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWia9GQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynSEgCfZ/zINl1ItdXcMUr1cnznwNgFGhAAoIoIpmre
+4qtH6PjV/+kq+2j2lmG
=bxjP
-----END PGP SIGNATURE-----
Merge tag 'tty-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small serdev and serial fixes for 4.15-rc3. They resolve
some reported problems:
- a number of serdev fixes to resolve crashes
- MIPS build fixes for their serial port
- a new 8250 device id
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
MIPS: Add custom serial.h with BASE_BAUD override for generic kernel
serdev: ttyport: fix tty locking in close
serdev: ttyport: fix NULL-deref on hangup
serdev: fix receive_buf return value when no callback
serdev: ttyport: add missing receive_buf sanity checks
serial: 8250_early: Only set divisor if valid clk & baud
serial: 8250_pci: Add Amazon PCI serial device ID
Fixes:
- A number of issues in the vgic discovered using SMATCH
- A bit one-off calculation in out stage base address mask (32-bit and
64-bit)
- Fixes to single-step debugging instructions that trap for other
reasons such as MMMIO aborts
- Printing unavailable hyp mode as error
- Potential spinlock deadlock in the vgic
- Avoid calling vgic vcpu free more than once
- Broken bit calculation for big endian systems
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJaJU3VAAoJEEtpOizt6ddyvmAH/jw+UAzN8lrcbfsYkyyulVDW
yTe+7PYMYEODQlY31R/IAlVQB23aR2KkGyMlKjb9IM6mcB13A7pUVTrFfFGMGzln
V75X20EV8CKcUBgdy8NRr9gsFwtDRHei0RIuQi8bkF0cV39QSiBgf36DW0oMCPFW
aqUP5UiFMlMr4UqpWmS+8W4E0OBqcqaJAJXIsvHoB0Wqv4j9AUTvLqoDEpQSVgOr
LzsaUc+K+zB2VOtEXEVSLZn6N4CRMmMUh3xfspC2Qv/zSLhHgl9QlOBjIpX6UYDp
a+md5qa1hMajKswGGZB7DF/yLUb76PWFcepWOn5F3DXSv9YLaxzY5DvrNSkl46w=
=tTiS
-----END PGP SIGNATURE-----
Merge tag 'kvm-arm-fixes-for-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm
KVM/ARM Fixes for v4.15.
Fixes:
- A number of issues in the vgic discovered using SMATCH
- A bit one-off calculation in out stage base address mask (32-bit and
64-bit)
- Fixes to single-step debugging instructions that trap for other
reasons such as MMMIO aborts
- Printing unavailable hyp mode as error
- Potential spinlock deadlock in the vgic
- Avoid calling vgic vcpu free more than once
- Broken bit calculation for big endian systems
Here are a few minor USB fixes for 4.15-rc3.
The largest here is the Kconfig text and configuration changes for the
USB TypeC build options that you reported during the -rc1 merge window.
The others are all just small fixes for reported issues, as well as some
new device ids.
The most "interesting" of anything here is the usbip fixes as it seems
lots of people are starting to pay attention to that driver at the
moment. These fixes should resolve all of the reported problems as of
now.
Of course there are the usual xhci and gadget fixes as well, can't go a
pull request without those...
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWia97w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynwMQCeL6klrbARdug4GQWqmO2eDIYr2aQAn2MFYd5P
VWCn8WsAf7toUTsB+J/g
=z/by
-----END PGP SIGNATURE-----
Merge tag 'usb-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a few minor USB fixes for 4.15-rc3.
The largest here is the Kconfig text and configuration changes for the
USB TypeC build options that you reported during the -rc1 merge
window. The others are all just small fixes for reported issues, as
well as some new device ids.
The most "interesting" of anything here is the usbip fixes as it seems
lots of people are starting to pay attention to that driver at the
moment. These fixes should resolve all of the reported problems as of
now.
Of course there are the usual xhci and gadget fixes as well, can't go
a pull request without those...
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
usb: xhci: fix panic in xhci_free_virt_devices_depth_first
xhci: Don't show incorrect WARN message about events for empty rings
usbip: fix usbip attach to find a port that matches the requested speed
usbip: Fix USB device hang due to wrong enabling of scatter-gather
uas: Always apply US_FL_NO_ATA_1X quirk to Seagate devices
usb: quirks: Add no-lpm quirk for KY-688 USB 3.1 Type-C Hub
usb: build drivers/usb/common/ when USB_SUPPORT is set
usb: hub: Cycle HUB power when initialization fails
USB: core: Add type-specific length check of BOS descriptors
usb: host: fix incorrect updating of offset
USB: ulpi: fix bus-node lookup
USB: usbfs: Filter flags passed in from user space
usb: add user selectable option for the whole USB Type-C Support
usb: f_fs: Force Reserved1=1 in OS_DESC_EXT_COMPAT
usb: gadget: core: Fix ->udc_set_speed() speed handling
usb: gadget: allow to enable legacy drivers without USB_ETH
usb: gadget: udc: renesas_usb3: fix number of the pipes
usb: gadget: don't dereference g until after it has been null checked
USB: serial: usb_debug: add new USB device id
usb: bdc: fix platform_no_drv_owner.cocci warnings
...
According to LS1021A RM, the value of PAL can be set so that the start of the
IP header in the receive data buffer is aligned to a 32-bit boundary. Normally,
setting PAL = 2 provides minimal padding to ensure such alignment of the IP
header.
However every incoming packet's 8-byte time stamp will be inserted into the
packet data buffer as padding alignment bytes when hardware time stamping is
enabled.
So we set the padding 8+2 here to avoid the flooded alignment faults:
root@128:~# cat /proc/cpu/alignment
User: 0
System: 17539 (inet_gro_receive+0x114/0x2c0)
Skipped: 0
Half: 0
Word: 0
DWord: 0
Multi: 17539
User faults: 2 (fixup)
Also shown when exception report enablement
CPU: 0 PID: 161 Comm: irq/66-eth1_g0_ Not tainted 4.1.21-rt13-WR8.0.0.0_preempt-rt #16
Hardware name: Freescale LS1021A
[<8001b420>] (unwind_backtrace) from [<8001476c>] (show_stack+0x20/0x24)
[<8001476c>] (show_stack) from [<807cfb48>] (dump_stack+0x94/0xac)
[<807cfb48>] (dump_stack) from [<80025d70>] (do_alignment+0x720/0x958)
[<80025d70>] (do_alignment) from [<80009224>] (do_DataAbort+0x40/0xbc)
[<80009224>] (do_DataAbort) from [<80015398>] (__dabt_svc+0x38/0x60)
Exception stack(0x86ad1cc0 to 0x86ad1d08)
1cc0: f9b3e080 86b3d072 2d78d287 00000000 866816c0 86b3d05e 86e785d0 00000000
1ce0: 00000011 0000000e 80840ab0 86ad1d3c 86ad1d08 86ad1d08 806d7fc0 806d806c
1d00: 40070013 ffffffff
[<80015398>] (__dabt_svc) from [<806d806c>] (inet_gro_receive+0x114/0x2c0)
[<806d806c>] (inet_gro_receive) from [<80660eec>] (dev_gro_receive+0x21c/0x3c0)
[<80660eec>] (dev_gro_receive) from [<8066133c>] (napi_gro_receive+0x44/0x17c)
[<8066133c>] (napi_gro_receive) from [<804f0538>] (gfar_clean_rx_ring+0x39c/0x7d4)
[<804f0538>] (gfar_clean_rx_ring) from [<804f0bf4>] (gfar_poll_rx_sq+0x58/0xe0)
[<804f0bf4>] (gfar_poll_rx_sq) from [<80660b10>] (net_rx_action+0x27c/0x43c)
[<80660b10>] (net_rx_action) from [<80033638>] (do_current_softirqs+0x1e0/0x3dc)
[<80033638>] (do_current_softirqs) from [<800338c4>] (__local_bh_enable+0x90/0xa8)
[<800338c4>] (__local_bh_enable) from [<8008025c>] (irq_forced_thread_fn+0x70/0x84)
[<8008025c>] (irq_forced_thread_fn) from [<800805e8>] (irq_thread+0x16c/0x244)
[<800805e8>] (irq_thread) from [<8004e490>] (kthread+0xe8/0x104)
[<8004e490>] (kthread) from [<8000fda8>] (ret_from_fork+0x14/0x2c)
Signed-off-by: Zumeng Chen <zumeng.chen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix the UART2 RTS pin mode on Intel Denverton.
- Fix the direction_output() behaviour on the Armada 37xx.
- Fix the groups selection per-SoC on the Gemini.
- Fix the interrupt pin bank on the Sunxi A80.
- Fix the UART mux on the Sunxi A64.
- Disable the strict mode on the Sunxi H5 driver.
-----BEGIN PGP SIGNATURE-----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=/auO
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"As with GPIO not much action in pin control. All are driver fixes:
- fix the UART2 RTS pin mode on Intel Denverton
- fix the direction_output() behaviour on the Armada 37xx
- fix the groups selection per-SoC on the Gemini
- fix the interrupt pin bank on the Sunxi A80
- fix the UART mux on the Sunxi A64
- disable the strict mode on the Sunxi H5 driver"
* tag 'pinctrl-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: sunxi: Disable strict mode for H5 driver
pinctrl: sunxi: Fix A64 UART mux value
pinctrl: sunxi: Fix A80 interrupt pin bank
pinctrl: gemini: Fix usage of 3512 groups
pinctrl: armada-37xx: Fix direction_output() callback behavior
pinctrl: denverton: Fix UART2 RTS pin mode
- Fix a crash in the 74x164 driver
- Fix IRQ banks in the DaVinci driver
- Fix the vendor prefix in the PCA953x driver
-----BEGIN PGP SIGNATURE-----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=B3ae
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Three small fixes for GPIO. Not much, I'm surprised by the silence in
my subsystems. All driver fixes:
- fix a crash in the 74x164 driver
- fix IRQ banks in the DaVinci driver
- fix the vendor prefix in the PCA953x driver"
* tag 'gpio-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: pca953x: fix vendor prefix for PCA9654
gpio: davinci: Assign first bank regs for unbanked case
gpio: 74x164: Fix crash during .remove()
This reverts commit d6f295e9def0; some userspace (in the case
we noticed it's wpa_supplicant), is relying on the current
error code to determine that a fixed name interface already
exists.
Reported-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously we swapped the tx_packets, tx_bytes and tx_dropped counters
with rx_packets, rx_bytes and rx_dropped counters, respectively. This
behaviour is correct and expected for VF representors but it should not
be swapped for physical port mac representors.
Fixes: eadfa4c3be ("nfp: add stats and xmit helpers for representors")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We have phy-cells for usb_phy0, but it's missing for usb_phy1 and we get:
Warning (phys_property): Missing property '#phy-cells' in node
/ocp/l4ls@48000000/control@140000/usb-phy@1b00 or bad phandle
(referred from /ocp/usb@47400000/usb@47401800:phys[0])
Signed-off-by: Tony Lindgren <tony@atomide.com>
Looks like the interrupt property is missing the controller and level
information causing:
Warning (interrupts_property): interrupts size is (4), expected multiple
of 12 in /ocp/elm@48078000
Signed-off-by: Tony Lindgren <tony@atomide.com>
We had to disable BH _before_ calling __inet_twsk_hashdance() in commit
cfac7f836a ("tcp/dccp: block bh before arming time_wait timer").
This means we can revert 614bdd4d6e ("tcp: must block bh in
__inet_twsk_hashdance()").
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geert Uytterhoeven reported a NFS oops, and pointed out that some of the
numbers were hashed and useless.
We could just turn them from '%p' into '%px', but those numbers are
really just legacy, and useless even when not hashed.
So just remove them entirely.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Without masking out the old value, we can end up pointing the DDI to a
disabled PLL, which makes the system fall over. Mask out the previous
value before setting the PLL to DDI mapping.
This can be observed by running igt/testdisplay with both an eDP and
HDMI/DP output active.
v2: Add the Bugzilla link
Fixes: 555e38d273 ("drm/i915/cnl: DDI - PLL mapping")
Testcase: igt/testdisplay
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103997
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: James Ausmus <james.ausmus@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201021700.13504-1-james.ausmus@intel.com
(cherry picked from commit 23a7068ec5)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Previously I was under the impression that the scanline counter
reads 0 when the pipe is off. Turns out that's not correct, and
instead the scanline counter simply stops when the pipe stops, and
it retains it's last value until the pipe starts up again, at which
point the scanline counter jumps to vblank start.
These jumps can cause the timestamp to jump backwards by one frame.
Since we use the timestamps to guesstimage also the frame counter
value on gen2, that would cause the frame counter to also jump
backwards, which leads to a massice difference from the previous value.
The end result is that flips/vblank events don't appear to complete as
they're stuck waiting for the frame counter to catch up to that massive
difference.
Fix the problem properly by actually making sure the scanline counter
has started to move before we assume that it's safe to enable vblank
processing.
v2: Less pointless duplication in the code (Chris)
Cc: stable@vger.kernel.org
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: b7792d8b54 ("drm/i915: Wait for pipe to start before sampling vblank timestamps on gen2")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171129153732.3612-1-ville.syrjala@linux.intel.com
(cherry picked from commit 8fedd64dab)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
If the HW is already wedged, attempting to submit a request will
generate an -EIO. If we tried this during suspend, we would abort
whereas all we want to do is to go sleep and throw away the corrupt
state.
Fixes: 5ab57c7020 ("drm/i915: Flush logical context image out to memory upon suspend")
Testcase: igt/gem_eio/suspend
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171130102951.14965-1-chris@chris-wilson.co.uk
(cherry picked from commit ecf73eb2d2)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
When RADA is active, the hardware decrypts the packets and strips off
the MIC as it is useless after decryption. Indicate that to mac80211.
Cc: stable@vger.kernel.org # 4.13+
[this is needed for the 9000-series HW to work properly]
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Set the flag that indicates that ICV was stripped on if
this option was enabled in the HW.
Cc: stable@vger.kernel.org # 4.13+
[this is needed for the 9000-series HW to work properly]
Signed-off-by: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Before deleting a time event (remain-on-channel instance), flush
the queue so that frames cannot get stuck on it. We already flush
the AUX STA queues, but a separate station is used for the P2P
Device queue.
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
add 1 PCI ID for 9260 series and 1 for 22000 series.
Cc: stable@vger.kernel.org
Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Hendrik Brueckner says:
====================
Perf tool bpf selftests revealed a broken uapi for s390 and arm64.
With the BPF_PROG_TYPE_PERF_EVENT program type the bpf_perf_event
structure exports the pt_regs structure for all architectures.
This fails for s390 and arm64 because pt_regs are not part of the
user api and kept in-kernel only. To mitigate the broken uapi,
introduce a wrapper that exports pt_regs in an asm-generic way.
For arm64, export the exising user_pt_regs structure. For s390,
introduce a user_pt_regs structure that exports the beginning of
pt_regs.
Note that user_pt_regs must export from the beginning of pt_regs
as BPF_PROG_TYPE_PERF_EVENT program type is not the only type for
running BPF programs.
Some more background:
For the bpf_perf_event, there is a uapi definition that is
passed to the BPF program. For other "probe" points like
trace points, kprobes, and uprobes, there is no uapi and the
BPF program is always passed pt_regs (which is OK as the BPF
program runs in the kernel context). The perf tool can attach
BPF programs to all of these "probe" points and, optionally,
can create a BPF prologue to access particular arguments
(passed as registers). For this, it uses DWARF/CFI
information to obtain the register and calls a perf-arch
backend function, regs_query_register_offset(). This function
returns the index into (user_)pt_regs for a particular
register. Then, perf creates a BPF prologue that accesses
this register based on the passed stucture from the "probe"
point.
Part of this series, are also updates to the testing and bpf selftest
to deal with asm-specifics. To complete the bpf support in perf, the
the regs_query_register_offset function is added for s390 to support
BPF prologue creation.
Changelog v1 -> v2:
- Correct kbuild test bot issues by including
asm-generic/bpf_perf_event.h for archictectures that do not have
their own asm version.
- Added patch to clean-up whitespace and coding style issues in s390
asm/ptrace.h (#4/6) as suggested by Alexei.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The regs_query_register_offset() helper function converts
register name like "%r0" to an offset of a register in user_pt_regs
It is required by the BPF prologue generator.
The user_pt_regs structure was recently added to "asm/ptrace.h".
Hence, update tools/perf/check-headers.sh to keep the header file
in sync with kernel changes.
Suggested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Synchronize the uapi kernel header files which solves the broken
uapi export of pt_regs. Because of arch-specific uapi headers,
extended the include path in the Makefile.
With this change, the test_verifier program compiles and runs successfully
on s390.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Correct whitespace and coding style issues in the s390 asm/ptrace.h
uapi header file. This is preparatory work to copy it to the tools/
directory for inclusion by selftests and perf.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Correct the broken uapi for the BPF_PROG_TYPE_PERF_EVENT program type
by exporting the user_pt_regs structure instead of the pt_regs structure
that is in-kernel only.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
To mitigate and correct the broken uapi for the BPF_PROG_TYPE_PERF_EVENT
program type, introduce a user_pt_regs structure (similar to arm64) that
exports parts from the beginnig of the pt_regs structure.
The export must start with the beginning of the pt_regs structure because
to correctly calculate BPF prologues for perf (regs_query_register_offset()).
For BPF_PROG_TYPE_PERF_EVENT program types, the BPF program is then passed
a user_pt_regs structure.
Note: Depending on future changes to the s390 pt_regs structure, consider
the user_pt_regs structure to be stable for a particular kernel version
only. (Of course, s390 tries to ensure keep it stable as much as possible.)
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Commit 0515e5999a ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT
program type") introduced the bpf_perf_event_data structure which
exports the pt_regs structure. This is OK for multiple architectures
but fail for s390 and arm64 which do not export pt_regs. Programs
using them, for example, the bpf selftest fail to compile on these
architectures.
For s390, exporting the pt_regs is not an option because s390 wants
to allow changes to it. For arm64, there is a user_pt_regs structure
that covers parts of the pt_regs structure for use by user space.
To solve the broken uapi for s390 and arm64, introduce an abstract
type for pt_regs and add an asm/bpf_perf_event.h file that concretes
the type. An asm-generic header file covers the architectures that
export pt_regs today.
The arch-specific enablement for s390 and arm64 follows in separate
commits.
Reported-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Fixes: 0515e5999a ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT program type")
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This reverts commit a3b2cb30f2.
That commit tried to fix problems with panic on powerpc in certain
circumstances, where some output from the generic panic code was being
dropped.
Unfortunately, it breaks things worse in other circumstances. In
particular when running a PAPR guest, it will now attempt to reboot
instead of informing the hypervisor (KVM or PowerVM) that the guest
has crashed. The crash notification is important to some
virtualization management layers.
Revert it for now until we can come up with a better solution.
Fixes: a3b2cb30f2 ("powerpc: Do not call ppc_md.panic in fadump panic notifier")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[mpe: Tweak change log a bit]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add new support for ALC257 codec.
[ It's supposed to be almost equivalent with other ALC25x variants,
just adding another type and id -- tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Martin Cermak reported that setting a uprobe doesn't work. Reason for
this is that the common uprobes code tries to get an unmapped area at
the last possible page within an address space.
This broke with commit 1aea9b3f92 ("s390/mm: implement 5 level pages
tables") which introduced an off-by-one bug which prevents to map
anything at the last possible page within an address space.
The check with the off-by-one bug however can be removed since with
commit 8ab867cb08 ("s390/mm: fix BUG_ON in crst_table_upgrade") the
necessary check is done at both call sites.
Reported-by: Martin Cermak <mcermak@redhat.com>
Bisected-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Fixes: 1aea9b3f92 ("s390/mm: implement 5 level pages tables")
Cc: <stable@vger.kernel.org> # v4.13+
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
More files under arch/s390 have been tagged with the SPDX identifier,
a few of those files have a GPL license text. Remove the GPL text
as it is no longer needed.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add the correct SPDX license to a few more files under arch/s390 and
drivers/s390 which have been missed to far.
The SPDX identifier is a legally binding shorthand, which can be used
instead of the full boiler plate text.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Prevent that a prefix flag is set based on invalid configuration data.
The validity.verify_base flag should only be set for alias devices.
Usually the unit address type is either one of base, PAV alias or
HyperPAV alias. But in cases where the unit address type is not set or
any other value the validity.verify_base flag might be set as well.
This would lead to follow on errors.
Explicitly check for alias devices and set the validity flag only for
them.
Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The switch_to() macro has an optimization to avoid saving and
restoring register contents that aren't needed for kernel threads.
There is however the possibility that a kernel thread execve's a user
space program. In such a case the execve'd process can partially see
the contents of the previous process, which shouldn't be allowed.
To avoid this, simply always save and restore register contents on
context switch.
Cc: <stable@vger.kernel.org> # v2.6.37+
Fixes: fdb6d070ef ("switch_to: dont restore/save access & fpu regs for kernel threads")
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
getnstimeofday() and timespec are deprecated since they can
overflow on 32-bit architectures. This simply changes to the
explicitly typed timespec64 version that doesn't have that
problem.
It would be nice to also convert to monotonic timestamps
and call ktime_get_ts64() rather than ktime_get_real_ts64(),
but that would be a user-visible change.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The 'no target buffer empty' error code only applies to HiperSockets.
If this code is reported on a different queue type, be sure to make the
same amount of noise as for any other error code.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
In the unlikely case that an ERROR buffer (presented by the HW)
consumed the last available slot on the input queue, increment the
corresponding statistics counter.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The original intent of the virtio header relicensing
from 2008 was to make sure anyone can implement compatible
devices/drivers. The virtio-ccw was omitted by mistake.
We have an ack from the only contributor as well as the
maintainer from IBM, so it's not too late to fix that.
Make it dual-licensed with GPLv2, as the whole kernel is GPL2.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
a problem with the new warning mode: it can break the build when confronted
with a source file containing malformed kerneldoc comments.
-----BEGIN PGP SIGNATURE-----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=ZKWF
-----END PGP SIGNATURE-----
Merge tag 'docs-4.15-fixes' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"A handful of documentation fixes.
The most significant of these addresses a problem with the new warning
mode: it can break the build when confronted with a source file
containing malformed kerneldoc comments"
* tag 'docs-4.15-fixes' of git://git.lwn.net/linux:
Documentation: fix docs build error after source file removed
scsi: documentation: Fix case of 'scsi_device' struct mention(s)
genericirq.rst: Remove :c:func:`...` in code blocks
dmaengine: doc : Fix warning "Title underline too short" while make xmldocs
scripts/kernel-doc: Don't fail with status != 0 if error encountered with -none
The irq_balancing_disabled and irq_is_percpu{,_devid} functions are
clearly intended to return bool like the functions in
kernel/irq/settings.h, but actually return an int containing a masked
value of desc->status_use_accessors. This can lead to subtle breakage
if, for example, the return value is subsequently truncated when
assigned to a narrower type.
As Linus points out:
| In particular, what can (and _has_ happened) is that people end up
| using these functions that return true or false, and they assign the
| result to something like a bitfield (or a char) or whatever.
|
| And the code looks *obviously* correct, when you have things like
|
| dev->percpu = irq_is_percpu_devid(dev->irq);
|
| and that "percpu" thing is just one status bit among many. It may even
| *work*, because maybe that "percpu" flag ends up not being all that
| important, or it just happens to never be set on the particular
| hardware that people end up testing.
|
| But while it looks obviously correct, and might even work, it's really
| fundamentally broken. Because that "true or false" function didn't
| actually return 0/1, it returned 0 or 0x20000.
|
| And 0x20000 may not fit in a bitmask or a "char" or whatever.
Fix the problem by consistently using bool as the return type for these
functions.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: marc.zyngier@arm.com
Link: https://lkml.kernel.org/r/1512142179-24616-1-git-send-email-will.deacon@arm.com
The previous commit which made the operator precedence in
irq_matrix_available() explicit made the implicit brokenness explicitely
wrong. It was wrong in the original commit already. The overworked
maintainer did not notice it either when merging the patch.
Replace the confusing '?' construct by a simple and obvious if ().
Fixes: 75f1133873 ("genirq/matrix: Make - vs ?: Precedence explicit")
Reported-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@chromium.org>
A couple of bugfixes that just became ready.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaIW15AAoJECgfDbjSjVRprxIH/RzUfSAfgaxhIVm2j3CRarGS
G0xJvKxuXpiDnEtfu5st9QRqNo8CMuPV02kIaOb0Aqq2GfdEb0sCFMTLbfnYuXul
uECu3uquXMUbuRXffQCHnDN4qqDWKRim8STIDPUlxjnBQqkos+JFn+MQ3vF2KEI0
SeA8u1YQs5Ji10ZPjZ7FEAirbxDFiLPb0Hb0tphBGSZPXBRV3qoA4qeKNOy45EkQ
F4J/1YxX/nWca0HYjBl2NceIqc4U/HcNZpner5YcJLad6SQSU9mSfEnJJIhOrRmu
/Ivn6Q1822/YVdePDcffLIrvFvM4HprT4BUYv0Cd/cTZZRFMCa16OXmDcPrWcLo=
=Nvzh
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"virtio and qemu bugfixes
A couple of bugfixes that just became ready"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_balloon: fix increment of vb->num_pfns in fill_balloon()
virtio: release virtio index when fail to device_register
fw_cfg: fix driver remove
Pull networking fixes from David Miller:
1) Various TCP control block fixes, including one that crashes with
SELinux, from David Ahern and Eric Dumazet.
2) Fix ACK generation in rxrpc, from David Howells.
3) ipvlan doesn't set the mark properly in the ipv4 route lookup key,
from Gao Feng.
4) SIT configuration doesn't take on the frag_off ipv4 field
configuration properly, fix from Hangbin Liu.
5) TSO can fail after device down/up on stmmac, fix from Lars Persson.
6) Various bpftool fixes (mostly in JSON handling) from Quentin Monnet.
7) Various SKB leak fixes in vhost/tun/tap (mostly observed as
performance problems). From Wei Xu.
8) mvpps's TX descriptors were not zero initialized, from Yan Markman.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (57 commits)
tcp: use IPCB instead of TCP_SKB_CB in inet_exact_dif_match()
tcp: add tcp_v4_fill_cb()/tcp_v4_restore_cb()
rxrpc: Fix the MAINTAINERS record
rxrpc: Use correct netns source in rxrpc_release_sock()
liquidio: fix incorrect indentation of assignment statement
stmmac: reset last TSO segment size after device open
ipvlan: Add the skb->mark as flow4's member to lookup route
s390/qeth: build max size GSO skbs on L2 devices
s390/qeth: fix GSO throughput regression
s390/qeth: fix thinko in IPv4 multicast address tracking
tap: free skb if flags error
tun: free skb in early errors
vhost: fix skb leak in handle_rx()
bnxt_en: Fix a variable scoping in bnxt_hwrm_do_send_msg()
bnxt_en: fix dst/src fid for vxlan encap/decap actions
bnxt_en: wildcard smac while creating tunnel decap filter
bnxt_en: Need to unconditionally shut down RoCE in bnxt_shutdown
phylink: ensure we take the link down when phylink_stop() is called
sfp: warn about modules requiring address change sequence
sfp: improve RX_LOS handling
...
The chip family of TILEPro and TILE-Gx was developed by Tilera, which
was eventually acquired by Mellanox. The tile architecture was added to
the kernel in 2010 and first appeared in 2.6.36.
Now at Mellanox we are developing new chips based on the ARM64
architecture; our last TILE-Gx chip (the Gx72) was released in 2013, and
our customers using tile architecture products are not, as far as we
know, looking to upgrade to newer kernel releases. In the absence of
someone in the community stepping up to take over maintainership, this
commit marks the architecture as orphaned.
Cc: Chris Metcalf <metcalf@alum.mit.edu>
Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roger He