This patch adds a new IV generator seqniv which is identical to
seqiv except that it skips the IV when authenticating. This is
intended to be used by algorithms such as rfc4106 that does the
IV authentication implicitly.
Note that the code used for seqniv is in fact identical to the
compatibility case for seqiv.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch converts the seqiv IV generator to work with the new
AEAD interface where IV generators are just normal AEAD algorithms.
Full backwards compatibility is paramount at this point since
no users have yet switched over to the new interface. Nor can
they switch to the new interface until IV generation is fully
supported by it.
So this means we are adding two versions of seqiv alongside the
existing one. The first one is the one that will be used when
the underlying AEAD algorithm has switched over to the new AEAD
interface. The second one handles the current case where the
underlying AEAD algorithm still uses the old interface.
Both versions export themselves through the new AEAD interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds a check for in scatterwalk_map_and_copy to avoid
copying from the same address to the same address. This is going
to be used for IV copying in AEAD IV generators.
There is no provision for partial overlaps.
This patch also uses the new scatterwalk_ffwd instead of doing
it by hand in scatterwalk_map_and_copy.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch makes gcm use the default null skcipher instead of
allocating a new one for each tfm.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds the basic structure of the new AEAD type. Unlike
the current version, there is no longer any concept of geniv. IV
generation will still be carried out by wrappers but they will be
normal AEAD algorithms that simply take the IPsec sequence number
as the IV.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch is the first step in the introduction of a new AEAD
alg type. Unlike normal conversions this patch only renames the
existing aead_alg structure because there are external references
to it.
Those references will be removed after this patch.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The primary user of AEAD, IPsec includes the IV in the AD in
most cases, except where it is implicitly authenticated by the
underlying algorithm.
The way it is currently implemented is a hack because we pass
the data in piecemeal and the underlying algorithms try to stitch
them back up into one piece.
This is why this patch is adding a new interface that allows a
single SG list to be passed in that contains everything so the
algorithm implementors do not have to stitch.
The new interface accepts a single source SG list and a single
destination SG list. Both must be laid out as follows:
AD, skipped data, plain/cipher text, ICV
The ICV is not present from the source during encryption and from
the destination during decryption.
For the top-level IPsec AEAD algorithm the plain/cipher text will
contain the generated (or received) IV.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds the scatterwalk_ffwd helper which can create an
SG list that starts in the middle of an existing SG list. The
new list may either be part of the existing list or be a chain
that latches onto part of the existing list.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As AEAD has switched over to using frontend types, the function
crypto_init_spawn must not be used since it does not specify a
frontend type. Otherwise it leads to a crash when the spawn is
used.
This patch fixes it by switching over to crypto_grab_aead instead.
Fixes: 5d1d65f8be ("crypto: aead - Convert top level interface to new style")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As AEAD has switched over to using frontend types, the function
crypto_init_spawn must not be used since it does not specify a
frontend type. Otherwise it leads to a crash when the spawn is
used.
This patch fixes it by switching over to crypto_grab_aead instead.
Fixes: 5d1d65f8be ("crypto: aead - Convert top level interface to new style")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto fix from Herbert Xu:
"This fixes a the crash in the newly added algif_aead interface when it
tries to link SG lists"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: algif_aead - fix invalid sgl linking
The call to asymmetric_key_hex_to_key_id() from ca_keys_setup()
silently fails with -ENOMEM. Instead of dynamically allocating
memory from a __setup function, this patch defines a variable
and calls __asymmetric_key_hex_to_key_id(), a new helper function,
directly.
This bug was introduced by 'commit 46963b774d ("KEYS: Overhaul
key identification when searching for asymmetric keys")'.
Changelog:
- for clarification, rename hexlen to asciihexlen in
asymmetric_key_hex_to_key_id()
- add size argument to __asymmetric_key_hex_to_key_id() - David Howells
- inline __asymmetric_key_hex_to_key_id() - David Howells
- remove duplicate strlen() calls
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # 3.18
Since MD5 IV are now available in crypto/md5.h, use them.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes it.
Also minor updates to comments.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch converts the top-level aead interface to the new style.
All user-level AEAD interface code have been moved into crypto/aead.h.
The allocation/free functions have switched over to the new way of
allocating tfms.
This patch also removes the double indrection on setkey so the
indirection now exists only at the alg level.
Apart from these there are no user-visible changes.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds a new primitive crypto_grab_spawn which is meant
to replace crypto_init_spawn and crypto_init_spawn2. Under the
new scheme the user no longer has to worry about reference counting
the alg object before it is subsumed by the spawn.
It is pretty much an exact copy of crypto_grab_aead.
Prior to calling this function spawn->frontend and spawn->inst
must have been set.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation for changing how struct net is refcounted
on kernel sockets pass the knowledge that we are creating
a kernel socket from sock_create_kern through to sk_alloc.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change the crypto 842 compression alg to use the software 842 compression
and decompression library. Add the crypto driver_name as "842-generic".
Remove the fallback to LZO compression.
Previously, this crypto compression alg attemped 842 compression using
PowerPC hardware, and fell back to LZO compression and decompression if
the 842 PowerPC hardware was unavailable or failed. This should not
fall back to any other compression method, however; users of this crypto
compression alg can fallback if desired, and transparent fallback tricks
callers into thinking they are getting 842 compression when they actually
get LZO compression - the failure of the 842 hardware should not be
transparent to the caller.
The crypto compression alg for a hardware device also should not be located
in crypto/ so this is now a software-only implementation that uses the 842
software compression/decompression library.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This adds a couple of test cases for CRC32 (not CRC32c) to
ensure that the generic and arch specific implementations
are in sync.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Steve Capper <steve.capper@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the test manager, there are a number of if-statements with expressions of
the form !x == y that incur warnings with gcc-5 of the following form:
../crypto/testmgr.c: In function '__test_aead':
../crypto/testmgr.c:523:12: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses]
if (!ret == template[i].fail) {
^
By converting the 'fail' member of struct aead_testvec and struct
cipher_testvec to a bool, we can get rid of the warnings.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In testmgr, struct pcomp_testvec takes a non-const 'params' field, which is
pointed to a const deflate_comp_params or deflate_decomp_params object. With
gcc-5 this incurs the following warnings:
In file included from ../crypto/testmgr.c:44:0:
../crypto/testmgr.h:28736:13: warning: initialization discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers]
.params = &deflate_comp_params,
^
../crypto/testmgr.h:28748:13: warning: initialization discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers]
.params = &deflate_comp_params,
^
../crypto/testmgr.h:28776:13: warning: initialization discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers]
.params = &deflate_decomp_params,
^
../crypto/testmgr.h:28800:13: warning: initialization discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers]
.params = &deflate_decomp_params,
^
Fix this by making the parameters pointer const and constifying the things
that use it.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the user explicitly states that they don't care whether the
algorithm has been tested (type = CRYPTO_ALG_TESTED and mask = 0),
there is a corner case where we may erroneously return ENOENT.
This patch fixes it by correcting the logic in the test.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the user explicitly states that they don't care whether the
algorithm has been tested (type = CRYPTO_ALG_TESTED and mask = 0),
there is a corner case where we may erroneously return ENOENT.
This patch fixes it by correcting the logic in the test.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The commit 59afdc7b32 ("crypto:
api - Move module sig ifdef into accessor function") broke the
build when modules are completely disabled because we directly
dereference module->name.
This patch fixes this by using the accessor function module_name.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Highlights:
- "experimental" code for managing md/raid1 across a cluster using
DLM. Code is not ready for general use and triggers a WARNING if used.
However it is looking good and mostly done and having in mainline
will help co-ordinate development.
- RAID5/6 can now batch multiple (4K wide) stripe_heads so as to
handle a full (chunk wide) stripe as a single unit.
- RAID6 can now perform read-modify-write cycles which should
help performance on larger arrays: 6 or more devices.
- RAID5/6 stripe cache now grows and shrinks dynamically. The value
set is used as a minimum.
- Resync is now allowed to go a little faster than the 'mininum' when
there is competing IO. How much faster depends on the speed of the
devices, so the effective minimum should scale with device speed to
some extent.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=OHG6
-----END PGP SIGNATURE-----
Merge tag 'md/4.1' of git://neil.brown.name/md
Pull md updates from Neil Brown:
"More updates that usual this time. A few have performance impacts
which hould mostly be positive, but RAID5 (in particular) can be very
work-load ensitive... We'll have to wait and see.
Highlights:
- "experimental" code for managing md/raid1 across a cluster using
DLM. Code is not ready for general use and triggers a WARNING if
used. However it is looking good and mostly done and having in
mainline will help co-ordinate development.
- RAID5/6 can now batch multiple (4K wide) stripe_heads so as to
handle a full (chunk wide) stripe as a single unit.
- RAID6 can now perform read-modify-write cycles which should help
performance on larger arrays: 6 or more devices.
- RAID5/6 stripe cache now grows and shrinks dynamically. The value
set is used as a minimum.
- Resync is now allowed to go a little faster than the 'mininum' when
there is competing IO. How much faster depends on the speed of the
devices, so the effective minimum should scale with device speed to
some extent"
* tag 'md/4.1' of git://neil.brown.name/md: (58 commits)
md/raid5: don't do chunk aligned read on degraded array.
md/raid5: allow the stripe_cache to grow and shrink.
md/raid5: change ->inactive_blocked to a bit-flag.
md/raid5: move max_nr_stripes management into grow_one_stripe and drop_one_stripe
md/raid5: pass gfp_t arg to grow_one_stripe()
md/raid5: introduce configuration option rmw_level
md/raid5: activate raid6 rmw feature
md/raid6 algorithms: xor_syndrome() for SSE2
md/raid6 algorithms: xor_syndrome() for generic int
md/raid6 algorithms: improve test program
md/raid6 algorithms: delta syndrome functions
raid5: handle expansion/resync case with stripe batching
raid5: handle io error of batch list
RAID5: batch adjacent full stripe write
raid5: track overwrite disk count
raid5: add a new flag to track if a stripe can be batched
raid5: use flex_array for scribble data
md raid0: access mddev->queue (request queue member) conditionally because it is not set when accessed from dm-raid
md: allow resync to go faster when there is competing IO.
md: remove 'go_faster' option from ->sync_request()
...
All users of AEAD should include crypto/aead.h instead of
include/linux/crypto.h.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: David S. Miller <davem@davemloft.net>
All users of AEAD should include crypto/aead.h instead of
include/linux/crypto.h.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: David S. Miller <davem@davemloft.net>
All users of AEAD should include crypto/aead.h instead of
include/linux/crypto.h.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: David S. Miller <davem@davemloft.net>
Now that all fips_enabled users are including linux/fips.h directly
instead of getting it through internal.h, we can remove the fips.h
inclusions from internal.h.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
All users of fips_enabled should include linux/fips.h directly
instead of getting it through internal.h.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
All users of fips_enabled should include linux/fips.h directly
instead of getting it through internal.h which is reserved for
internal crypto API implementors.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is currently a large ifdef FIPS code section in proc.c.
Ostensibly it's there because the fips_enabled sysctl sits under
/proc/sys/crypto. However, no other crypto sysctls exist.
In fact, the whole ethos of the crypto API is against such user
interfaces so this patch moves all the FIPS sysctl code over to
fips.c.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The header file internal.h is only meant for internal crypto API
implementors such as rng.c. So fips has no business in including
it.
This patch removes that inclusions and instead adds inclusions of
the actual features used by fips.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
All users of fips_enabled should include linux/fips.h directly
instead of getting it through internal.h.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch removes the unnecessary CRYPTO_FIPS ifdef from
drbg_healthcheck_sanity so that the code always gets checked
by the compiler.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Stephan Mueller <smueller@chronox.de>
Currently we're hiding mod->sig_ok under an ifdef in open code.
This patch adds a module_sig_ok accessor function and removes that
ifdef.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
The function crypto_ahash_init can also be asynchronous just
like update and final. So all callers must be able to handle
an async return.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If we allocate a seed on behalf ot the user in crypto_rng_reset,
we must ensure that it is zeroed afterwards or the RNG may be
compromised.
Reported-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that crypto_rng_reset takes a const argument, we no longer
need to cast away the const qualifier.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that all rng implementations have switched over to the new
interface, we can remove the old low-level interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch ocnverts the ANSI CPRNG implementation to the new
low-level rng interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The file internal.h is only meant to be used by internel API
implementation and not algorithm implementations. In fact it
isn't even needed here so this patch removes it.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This patch converts the DRBG implementation to the new low-level
rng interface.
This allows us to get rid of struct drbg_gen by using the new RNG
API instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Stephan Mueller <smueller@chronox.de>
This patch adds the helpers that allow the registration and removal
of multiple RNG algorithms.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch converts the low-level crypto_rng interface to the
"new" style.
This allows existing implementations to be converted over one-
by-one. Once that is complete we can then remove the old rng
interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is no reason why crypto_rng_reset should modify the seed
so this patch marks it as const. Since our algorithms don't
export a const seed function yet we have to go through some
contortions for now.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Glue it altogehter. The raid6 rmw path should work the same as the
already existing raid5 logic. So emulate the prexor handling/flags
and split functions as needed.
1) Enable xor_syndrome() in the async layer.
2) Split ops_run_prexor() into RAID4/5 and RAID6 logic. Xor the syndrome
at the start of a rmw run as we did it before for the single parity.
3) Take care of rmw run in ops_run_reconstruct6(). Again process only
the changed pages to get syndrome back into sync.
4) Enhance set_syndrome_sources() to fill NULL pages if we are in a rmw
run. The lower layers will calculate start & end pages from that and
call the xor_syndrome() correspondingly.
5) Adapt the several places where we ignored Q handling up to now.
Performance numbers for a single E5630 system with a mix of 10 7200k
desktop/server disks. 300 seconds random write with 8 threads onto a
3,2TB (10*400GB) RAID6 64K chunk without spare (group_thread_cnt=4)
bsize rmw_level=1 rmw_level=0 rmw_level=1 rmw_level=0
skip_copy=1 skip_copy=1 skip_copy=0 skip_copy=0
4K 115 KB/s 141 KB/s 165 KB/s 140 KB/s
8K 225 KB/s 275 KB/s 324 KB/s 274 KB/s
16K 434 KB/s 536 KB/s 640 KB/s 534 KB/s
32K 751 KB/s 1,051 KB/s 1,234 KB/s 1,045 KB/s
64K 1,339 KB/s 1,958 KB/s 2,282 KB/s 1,962 KB/s
128K 2,673 KB/s 3,862 KB/s 4,113 KB/s 3,898 KB/s
256K 7,685 KB/s 7,539 KB/s 7,557 KB/s 7,638 KB/s
512K 19,556 KB/s 19,558 KB/s 19,652 KB/s 19,688 Kb/s
Signed-off-by: Markus Stockhausen <stockhausen@collogia.de>
Signed-off-by: NeilBrown <neilb@suse.de>
This patch adds the new top-level function crypto_rng_generate
which generates random numbers with additional input. It also
extends the mid-level rng_gen_random function to take additional
data as input.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch converts the top-level crypto_rng to the "new" style.
It was the last algorithm type added before we switched over
to the new way of doing things exemplified by shash.
All users will automatically switch over to the new interface.
Note that this patch does not touch the low-level interface to
rng implementations.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds a crypto_alg_extsize helper that can be used
by algorithm types such as pcompress and shash.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Initialising the RNG in drbg_kcapi_init is a waste of precious
entropy because all users will immediately seed the RNG after
the allocation.
In fact, all users should seed the RNG before using it. So there
is no point in doing the seeding in drbg_kcapi_init.
This patch removes the initial seeding and the user must seed
the RNG explicitly (as they all currently do).
This patch also changes drbg_kcapi_reset to allow reseeding.
That is, if you call it after a successful initial seeding, then
it will not reset the internal state of the DRBG before mixing
the new input and entropy.
If you still wish to reset the internal state, you can always
free the DRBG and allocate a new one.
Finally this patch removes locking from drbg_uninstantiate because
it's now only called from the destruction path which must not be
executed in parallel with normal operations.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Stephan Mueller <smueller@chronox.de>
As we moved the mutex init out of drbg_instantiate and into cra_init
we need to explicitly initialise the mutex in drbg_healthcheck_sanity.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Stephan Mueller <smueller@chronox.de>
As the DRBG does not operate on shadow copies of the DRBG instance
any more, the cipher handles only need to be allocated once during
initalization time and deallocated during uninstantiate time.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The creation of a shadow copy is intended to only hold a short term
lock. But the drawback is that parallel users have a very similar DRBG
state which only differs by a high-resolution time stamp.
The DRBG will now hold a long term lock. Therefore, the lock is changed
to a mutex which implies that the DRBG can only be used in process
context.
The lock now guards the instantiation as well as the entire DRBG
generation operation. Therefore, multiple callers are fully serialized
when generating a random number.
As the locking is changed to use a long-term lock to avoid such similar
DRBG states, the entire creation and maintenance of a shadow copy can be
removed.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The drbg_generate returns 0 in success case. That means that
drbg_generate_long will always only generate drbg_max_request_bytes at
most. Longer requests will be truncated to drbg_max_request_bytes.
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The buffer uses for temporary data must be cleared entirely. In AES192
the used buffer is drbg_statelen(drbg) + drbg_blocklen(drbg) as
documented in the comment above drbg_ctr_df.
This patch ensures that the temp buffer is completely wiped.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 9c521a200b ("crypto: api - remove instance when test failed")
tried to grab a module reference count before the module was even set.
Worse, it then goes on to free the module reference count after it is
set so you quickly end up with a negative module reference count which
prevents people from using any instances belonging to that module.
This patch moves the module initialisation before the reference
count.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The networking updates from David Miller removed the iocb argument from
sendmsg and recvmsg (in commit 1b784140474e: "net: Remove iocb argument
from sendmsg and recvmsg"), but the crypto code had added new instances
of them.
When I pulled the crypto update, it was a silent semantic mis-merge, and
I overlooked the new warning messages in my test-build. I try to fix
those in the merge itself, but that relies on me noticing. Oh well.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull crypto update from Herbert Xu:
"Here is the crypto update for 4.1:
New interfaces:
- user-space interface for AEAD
- user-space interface for RNG (i.e., pseudo RNG)
New hashes:
- ARMv8 SHA1/256
- ARMv8 AES
- ARMv8 GHASH
- ARM assembler and NEON SHA256
- MIPS OCTEON SHA1/256/512
- MIPS img-hash SHA1/256 and MD5
- Power 8 VMX AES/CBC/CTR/GHASH
- PPC assembler AES, SHA1/256 and MD5
- Broadcom IPROC RNG driver
Cleanups/fixes:
- prevent internal helper algos from being exposed to user-space
- merge common code from assembly/C SHA implementations
- misc fixes"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (169 commits)
crypto: arm - workaround for building with old binutils
crypto: arm/sha256 - avoid sha256 code on ARMv7-M
crypto: x86/sha512_ssse3 - move SHA-384/512 SSSE3 implementation to base layer
crypto: x86/sha256_ssse3 - move SHA-224/256 SSSE3 implementation to base layer
crypto: x86/sha1_ssse3 - move SHA-1 SSSE3 implementation to base layer
crypto: arm64/sha2-ce - move SHA-224/256 ARMv8 implementation to base layer
crypto: arm64/sha1-ce - move SHA-1 ARMv8 implementation to base layer
crypto: arm/sha2-ce - move SHA-224/256 ARMv8 implementation to base layer
crypto: arm/sha256 - move SHA-224/256 ASM/NEON implementation to base layer
crypto: arm/sha1-ce - move SHA-1 ARMv8 implementation to base layer
crypto: arm/sha1_neon - move SHA-1 NEON implementation to base layer
crypto: arm/sha1 - move SHA-1 ARM asm implementation to base layer
crypto: sha512-generic - move to generic glue implementation
crypto: sha256-generic - move to generic glue implementation
crypto: sha1-generic - move to generic glue implementation
crypto: sha512 - implement base layer for SHA-512
crypto: sha256 - implement base layer for SHA-256
crypto: sha1 - implement base layer for SHA-1
crypto: api - remove instance when test failed
crypto: api - Move alg ref count init to crypto_check_alg
...
This updated the generic SHA-512 implementation to use the
generic shared SHA-512 glue code.
It also implements a .finup hook crypto_sha512_finup() and exports
it to other modules. The import and export() functions and the
.statesize member are dropped, since the default implementation
is perfectly suitable for this module.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This updates the generic SHA-256 implementation to use the
new shared SHA-256 glue code.
It also implements a .finup hook crypto_sha256_finup() and exports
it to other modules. The import and export() functions and the
.statesize member are dropped, since the default implementation
is perfectly suitable for this module.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This updated the generic SHA-1 implementation to use the generic
shared SHA-1 glue code.
It also implements a .finup hook crypto_sha1_finup() and exports
it to other modules. The import and export() functions and the
.statesize member are dropped, since the default implementation
is perfectly suitable for this module.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A cipher instance is added to the list of instances unconditionally
regardless of whether the associated test failed. However, a failed
test implies that during another lookup, the cipher instance will
be added to the list again as it will not be found by the lookup
code.
That means that the list can be filled up with instances whose tests
failed.
Note: tests only fail in reality in FIPS mode when a cipher is not
marked as fips_allowed=1. This can be seen with cmac(des3_ede) that does
not have a fips_allowed=1. When allocating the cipher, the allocation
fails with -ENOENT due to the missing fips_allowed=1 flag (which
causes the testmgr to return EINVAL). Yet, the instance of
cmac(des3_ede) is shown in /proc/crypto. Allocating the cipher again
fails again, but a 2nd instance is listed in /proc/crypto.
The patch simply de-registers the instance when the testing failed.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We currently initialise the crypto_alg ref count in the function
__crypto_register_alg. As one of the callers of that function
crypto_register_instance needs to obtain a ref count before it
calls __crypto_register_alg, we need to move the initialisation
out of there.
Since both callers of __crypto_register_alg call crypto_check_alg,
this is the logical place to perform the initialisation.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Stephan Mueller <smueller@chronox.de>
trivial conflict in net/socket.c and non-trivial one in crypto -
that one had evaded aio_complete() removal.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The function crypto_alg_match returns an algorithm without taking
any references on it. This means that the algorithm can be freed
at any time, therefore all users of crypto_alg_match are buggy.
This patch fixes this by taking a reference count on the algorithm
to prevent such races.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fix a spelling typo in crypto/Kconfig.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch makes crypto_unregister_instance take a crypto_instance
instead of a crypto_alg. This allows us to remove a duplicate
CRYPTO_ALG_INSTANCE check in crypto_unregister_instance.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There are multiple problems in crypto_unregister_instance:
1) The cra_refcnt BUG_ON check is racy and can cause crashes.
2) The cra_refcnt check shouldn't exist at all.
3) There is no reference on tmpl to protect the tmpl->free call.
This patch rewrites the function using crypto_remove_spawn which
now morphs into crypto_remove_instance.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
After the TX sgl is expanded we need to explicitly mark end of data
at the last buffer that contains data.
Changes in v2
- use type 'bool' and true/false for 'mark'.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
No need to use kzalloc to allocate sgls as the structure is initialized anyway.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use EXPORT_SYMBOL_GPL instead of EXPORT_SYMBOL.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mcryptd is used as a wrapper around internal ciphers. Therefore,
the mcryptd must process the internal cipher by marking mcryptd as
internal if the underlying cipher is an internal cipher.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
With ciphers that now cannot be accessed via the kernel crypto API,
callers shall be able to identify the ciphers that are not callable. The
/proc/crypto file is added a boolean field identifying that such
internal ciphers.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The cryptd is used as a wrapper around internal ciphers. Therefore, the
cryptd must process the internal cipher by marking cryptd as internal if
the underlying cipher is an internal cipher.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Allocate the ciphers irrespectively if they are marked as internal
or not. As all ciphers, including the internal ciphers will be
processed by the testmgr, it needs to be able to allocate those
ciphers.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Several hardware related cipher implementations are implemented as
follows: a "helper" cipher implementation is registered with the
kernel crypto API.
Such helper ciphers are never intended to be called by normal users. In
some cases, calling them via the normal crypto API may even cause
failures including kernel crashes. In a normal case, the "wrapping"
ciphers that use the helpers ensure that these helpers are invoked
such that they cannot cause any calamity.
Considering the AF_ALG user space interface, unprivileged users can
call all ciphers registered with the crypto API, including these
helper ciphers that are not intended to be called directly. That
means, with AF_ALG user space may invoke these helper ciphers
and may cause undefined states or side effects.
To avoid any potential side effects with such helpers, the patch
prevents the helpers to be called directly. A new cipher type
flag is added: CRYPTO_ALG_INTERNAL. This flag shall be used
to mark helper ciphers. These ciphers can only be used if the
caller invoke the cipher with CRYPTO_ALG_INTERNAL in the type and
mask field.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change type from unsigned long to int to fix an issue reported by kbuild robot:
crypto/algif_skcipher.c:596 skcipher_recvmsg_async() warn: unsigned 'used' is
never less than zero.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The way the algif_skcipher works currently is that on sendmsg/sendpage it
builds an sgl for the input data and then on read/recvmsg it sends the job
for encryption putting the user to sleep till the data is processed.
This way it can only handle one job at a given time.
This patch changes it to be asynchronous by adding AIO support.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Due to the change to RNGs to always return zero in success case, the RNG
interface must zeroize the buffer with the length provided by the
caller.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Due to the change to RNGs to always return zero in success case, the
invocation of the RNGs in the test manager must be updated as otherwise
the RNG self tests are not properly executed any more.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Alexander Bergmann <abergmann@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This moves all Kconfig symbols defined in crypto/Kconfig that depend
on CONFIG_ARM to a dedicated Kconfig file in arch/arm/crypto, which is
where the code that implements those features resides as well.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enable user to select OCTEON SHA1/256/512 modules.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change the RNGs to always return 0 in success case.
This patch ensures that seqiv.c works with RNGs other than krng. seqiv
expects that any return code other than 0 is an error. Without the
patch, rfc4106(gcm(aes)) will not work when using a DRBG or an ANSI
X9.31 RNG.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The DRBG code contains memset(0) calls to initialize a varaible
that are not necessary as the variable is always overwritten by
the processing.
This patch increases the CTR and Hash DRBGs by about 5%.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CTR DRBG only encrypts one single block at a time. Thus, use the
single block crypto API to avoid additional overhead from the block
chaining modes.
With the patch, the speed of the DRBG increases between 30% and 40%.
The DRBG still passes the CTR DRBG CAVS test.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Integrate the module into the kernel config tree.
Signed-off-by: Markus Stockhausen <stockhausen@collogia.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enable compilation of the AEAD AF_ALG support and provide a Kconfig
option to compile the AEAD AF_ALG support.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds the AEAD support for AF_ALG.
The implementation is based on algif_skcipher, but contains heavy
modifications to streamline the interface for AEAD uses.
To use AEAD, the user space consumer has to use the salg_type named
"aead".
The AEAD implementation includes some overhead to calculate the size of
the ciphertext, because the AEAD implementation of the kernel crypto API
makes implied assumption on the location of the authentication tag. When
performing an encryption, the tag will be added to the created
ciphertext (note, the tag is placed adjacent to the ciphertext). For
decryption, the caller must hand in the ciphertext with the tag appended
to the ciphertext. Therefore, the selection of the used memory
needs to add/subtract the tag size from the source/destination buffers
depending on the encryption type. The code is provided with comments
explaining when and how that operation is performed.
A fully working example using all aspects of AEAD is provided at
http://www.chronox.de/libkcapi.html
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
After TIPC doesn't depend on iocb argument in its internal
implementations of sendmsg() and recvmsg() hooks defined in proto
structure, no any user is using iocb argument in them at all now.
Then we can drop the redundant iocb argument completely from kinds of
implementations of both sendmsg() and recvmsg() in the entire
networking stack.
Cc: Christoph Hellwig <hch@lst.de>
Suggested-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Integrate the module into the kernel config tree.
Signed-off-by: Markus Stockhausen <stockhausen@collogia.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Integrate the module into the kernel configuration
Signed-off-by: Markus Stockhausen <stockhausen@collogia.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Integrate the module into the kernel config tree.
Signed-off-by: Markus Stockhausen <stockhausen@collogia.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto update from Herbert Xu:
"Here is the crypto update for 3.20:
- Added 192/256-bit key support to aesni GCM.
- Added MIPS OCTEON MD5 support.
- Fixed hwrng starvation and race conditions.
- Added note that memzero_explicit is not a subsitute for memset.
- Added user-space interface for crypto_rng.
- Misc fixes"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (71 commits)
crypto: tcrypt - do not allocate iv on stack for aead speed tests
crypto: testmgr - limit IV copy length in aead tests
crypto: tcrypt - fix buflen reminder calculation
crypto: testmgr - mark rfc4106(gcm(aes)) as fips_allowed
crypto: caam - fix resource clean-up on error path for caam_jr_init
crypto: caam - pair irq map and dispose in the same function
crypto: ccp - terminate ccp_support array with empty element
crypto: caam - remove unused local variable
crypto: caam - remove dead code
crypto: caam - don't emit ICV check failures to dmesg
hwrng: virtio - drop extra empty line
crypto: replace scatterwalk_sg_next with sg_next
crypto: atmel - Free memory in error path
crypto: doc - remove colons in comments
crypto: seqiv - Ensure that IV size is at least 8 bytes
crypto: cts - Weed out non-CBC algorithms
MAINTAINERS: add linux-crypto to hw random
crypto: cts - Remove bogus use of seqiv
crypto: qat - don't need qat_auth_state struct
crypto: algif_rng - fix sparse non static symbol warning
...
Commit 1d10eb2f15 ("crypto: switch af_alg_make_sg() to iov_iter")
broke af_alg_make_sg() and skcipher_recvmsg() in the process of moving
them to the iov_iter interfaces. The 'npages' calculation in the formar
calculated the number of *bytes* in the pages, and in the latter case
the conversion didn't re-read the value of 'ctx->used' after waiting for
it to become non-zero.
This reverts to the original code for both these cases.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The working copy of IV is the same size as the transformation's IV.
It is not necessary to copy more than that from the template since
iv_len is usually less than MAX_IVLEN and the rest of the copied data
is garbage.
Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- This fixes the intent of the code to limit the last scatterlist to
either a full PAGE or a fraction of it, depending on the number of
pages needed by buflen and the available space advertised by XBUFLEN.
The original code always sets the last scatterlist to a fraction of a
PAGE because the first 'if' is never executed.
- Rearrange the second part of the code to remove the conditional from
the loop
Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
With that, all ->sendmsg() instances are converted to iov_iter primitives
and are agnostic wrt the kind of iov_iter they are working with.
So's the last remaining ->recvmsg() instance that wasn't kind-agnostic yet.
All ->sendmsg() and ->recvmsg() advance ->msg_iter by the amount actually
copied and none of them modifies the underlying iovec, etc.
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This gcm variant is popular for ipsec use, and there are folks who would
like to use it while in fips mode. Mark it with fips_allowed=1 to
facilitate that.
CC: LKML <linux-kernel@vger.kernel.org>
CC: Stephan Mueller <smueller@atsec.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Stephan Mueller <smueller@atsec.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Modify crypto drivers to use the generic SG helper since
both of them are equivalent and the one from crypto is redundant.
See also:
468577abe3 reverted in
b2ab4a57b0
Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since seqiv is designed for IPsec we need to be able to accomodate
the whole IPsec sequence number in order to ensure the uniqueness
of the IV.
This patch forbids any algorithm with an IV size of less than 8
from using it. This should have no impact on existing users since
they all have an IV size of 8.
Reported-by: Maciej ?enczykowski <zenczykowski@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Maciej ?enczykowski <zenczykowski@gmail.com>
The cts algorithm as currently implemented assumes the underlying
is a CBC-mode algorithm. So this patch adds a check for that to
eliminate bogus combinations of cts with non-CBC modes.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The seqiv generator is completely inappropriate for cts as it's
designed for IPsec algorithms. Since cts users do not actually
use the IV generator we can just fall back to the default.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Maciej ?enczykowski <zenczykowski@gmail.com>
Fixes the following sparse warnings:
crypto/algif_rng.c:185:13: warning:
symbol 'rng_exit' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Stephan Mueller <smueller@chronox.de>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
tcrypt/testmgr uses wait_for_completion_interruptible() everywhere when
it waits for a request to be completed. If it's interrupted, then the
test is aborted and the request is freed.
However, if any of these calls actually do get interrupted, the result
will likely be a kernel crash, when the driver handles the now-freed
request. Use wait_for_completion() instead.
Signed-off-by: Rabin Vincent <rabin.vincent@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 5d26a105b5 ("crypto: prefix module autoloading with "crypto-"")
changed the automatic module loading when requesting crypto algorithms
to prefix all module requests with "crypto-". This requires all crypto
modules to have a crypto specific module alias even if their file name
would otherwise match the requested crypto algorithm.
Even though commit 5d26a105b5 added those aliases for a vast amount of
modules, it was missing a few. Add the required MODULE_ALIAS_CRYPTO
annotations to those files to make them get loaded automatically, again.
This fixes, e.g., requesting 'ecb(blowfish-generic)', which used to work
with kernels v3.18 and below.
Also change MODULE_ALIAS() lines to MODULE_ALIAS_CRYPTO(). The former
won't work for crypto modules any more.
Fixes: 5d26a105b5 ("crypto: prefix module autoloading with "crypto-"")
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This reverts commit 421d82f5b3.
None of the data zeroed are on the stack so the compiler cannot
optimise them away.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enable compilation of the RNG AF_ALG support and provide a Kconfig
option to compile the RNG AF_ALG support.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds the random number generator support for AF_ALG.
A random number generator's purpose is to generate data without
requiring the caller to provide any data. Therefore, the AF_ALG
interface handler for RNGs only implements a callback handler for
recvmsg.
The following parameters provided with a recvmsg are processed by the
RNG callback handler:
* sock - to resolve the RNG context data structure accessing the
RNG instance private to the socket
* len - this parameter allows userspace callers to specify how
many random bytes the RNG shall produce and return. As the
kernel context for the RNG allocates a buffer of 128 bytes to
store random numbers before copying them to userspace, the len
parameter is checked that it is not larger than 128. If a
caller wants more random numbers, a new request for recvmsg
shall be made.
The size of 128 bytes is chose because of the following considerations:
* to increase the memory footprint of the kernel too much (note,
that would be 128 bytes per open socket)
* 128 is divisible by any typical cryptographic block size an
RNG may have
* A request for random numbers typically only shall supply small
amount of data like for keys or IVs that should only require
one invocation of the recvmsg function.
Note, during instantiation of the RNG, the code checks whether the RNG
implementation requires seeding. If so, the RNG is seeded with output
from get_random_bytes.
A fully working example using all aspects of the RNG interface is
provided at http://www.chronox.de/libkcapi.html
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
alg_setkey should zeroize the sensitive data after use.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
algif_skcipher sends 127 sgl buffers for encryption regardless of how
many buffers acctually have data to process, where the few first with
valid len and the rest with zero len. This is not very eficient.
This patch marks the last one with data as the last one to process.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use setsockopt on the tfm FD to provide the authentication tag size for
an AEAD cipher. This is achieved by adding a callback function which is
intended to be used by the AEAD AF_ALG implementation.
The optlen argument of the setsockopt specifies the authentication tag
size to be used with the AEAD tfm.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds a panic if the FIPS 140-2 self test error failed.
Note, that entire code is only executed with fips_enabled (i.e. when the
kernel is booted with fips=1. It is therefore not executed for 99.9% of
all user base.
As mathematically such failure cannot occur, this panic should never be
triggered. But to comply with NISTs current requirements, an endless
loop must be replaced with the panic.
When the new version of FIPS 140 will be released, this entire
continuous self test function will be ripped out as it will not be
needed any more.
This patch is functionally equivalent as implemented in ansi_cprng.c and drivers/char/random.c.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixed style error identified by checkpatch.
WARNING: Missing a blank line after declarations
+ int err = crypto_remove_alg(&inst->alg, &users);
+ BUG_ON(err);
Signed-off-by: Joshua I. James <joshua@cybercrimetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixed style error identified by checkpatch.
WARNING: Missing a blank line after declarations
+ unsigned int unaligned = alignmask + 1 - (offset & alignmask);
+ if (nbytes > unaligned)
Signed-off-by: Joshua I. James <joshua@cybercrimetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixed style error identified by checkpatch.
ERROR: space required before the open parenthesis '('
+ switch(cmsg->cmsg_type) {
Signed-off-by: Joshua I. James <joshua@cybercrimetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixed style error identified by checkpatch.
ERROR: do not use assignment in if condition
+ if ((err = crypto_register_instance(tmpl, inst))) {
Signed-off-by: Joshua I. James <joshua@cybercrimetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixed style errors reported by checkpatch.
WARNING: Missing a blank line after declarations
+ u8 *end_page = (u8 *)(((unsigned long)(start + len - 1)) & PAGE_MASK);
+ return max(start, end_page);
WARNING: line over 80 characters
+ scatterwalk_start(&walk->out, scatterwalk_sg_next(walk->out.sg));
WARNING: Missing a blank line after declarations
+ int err = ablkcipher_copy_iv(walk, tfm, alignmask);
+ if (err)
ERROR: do not use assignment in if condition
+ if ((err = crypto_register_instance(tmpl, inst))) {
Signed-off-by: Joshua I. James <joshua@cybercrimetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If a request is backlogged, it's complete() handler will get called
twice: once with -EINPROGRESS, and once with the final error code.
af_alg's complete handler, unlike other users, does not handle the
-EINPROGRESS but instead always completes the completion that recvmsg()
is waiting on. This can lead to a return to user space while the
request is still pending in the driver. If userspace closes the sockets
before the requests are handled by the driver, this will lead to
use-after-frees (and potential crashes) in the kernel due to the tfm
having been freed.
The crashes can be easily reproduced (for example) by reducing the max
queue length in cryptod.c and running the following (from
http://www.chronox.de/libkcapi.html) on AES-NI capable hardware:
$ while true; do kcapi -x 1 -e -c '__ecb-aes-aesni' \
-k 00000000000000000000000000000000 \
-p 00000000000000000000000000000000 >/dev/null & done
Cc: stable@vger.kernel.org
Signed-off-by: Rabin Vincent <rabin.vincent@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto update from Herbert Xu:
- The crypto API is now documented :)
- Disallow arbitrary module loading through crypto API.
- Allow get request with empty driver name through crypto_user.
- Allow speed testing of arbitrary hash functions.
- Add caam support for ctr(aes), gcm(aes) and their derivatives.
- nx now supports concurrent hashing properly.
- Add sahara support for SHA1/256.
- Add ARM64 version of CRC32.
- Misc fixes.
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (77 commits)
crypto: tcrypt - Allow speed testing of arbitrary hash functions
crypto: af_alg - add user space interface for AEAD
crypto: qat - fix problem with coalescing enable logic
crypto: sahara - add support for SHA1/256
crypto: sahara - replace tasklets with kthread
crypto: sahara - add support for i.MX53
crypto: sahara - fix spinlock initialization
crypto: arm - replace memset by memzero_explicit
crypto: powerpc - replace memset by memzero_explicit
crypto: sha - replace memset by memzero_explicit
crypto: sparc - replace memset by memzero_explicit
crypto: algif_skcipher - initialize upon init request
crypto: algif_skcipher - removed unneeded code
crypto: algif_skcipher - Fixed blocking recvmsg
crypto: drbg - use memzero_explicit() for clearing sensitive data
crypto: drbg - use MODULE_ALIAS_CRYPTO
crypto: include crypto- module prefix in template
crypto: user - add MODULE_ALIAS
crypto: sha-mb - remove a bogus NULL check
crytpo: qat - Fix 64 bytes requests
...
Introduce helper macro for_each_cmsghdr as a wrapper of the enumerating
cmsghdr from msghdr, just cleanup.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Note that the code _using_ ->msg_iter at that point will be very
unhappy with anything other than unshifted iovec-backed iov_iter.
We still need to convert users to proper primitives.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch allows the testing of arbitrary hash functions specified
by the alg module parameter by using them in mode 300 (for sync hash)
and mode 400 (for async hash).
For example, you could do
modprobe tcrypt mode=300 alg='vmac(aes)'
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
AEAD requires the caller to specify the following information separate
from the data stream. This information allows the AEAD interface handler
to identify the AAD, ciphertext/plaintext and the authentication tag:
* Associated authentication data of arbitrary length and
length
* Length of authentication tag for encryption
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When using the algif_skcipher, the following call sequence causess a
re-initialization:
1. sendmsg with ALG_SET_OP and iov == NULL, iovlen == 0 (i.e
initializing the cipher, but not sending data)
2. sendmsg with msg->msg-controllen == 0 and iov != NULL (using the initalized
cipher handle by sending data)
In step 2, the cipher operation type (encryption or decryption) is reset
to always decryption, because the local variable of enc is put into
ctx->enc as ctx->user is still zero.
The same applies when all send data is processed and ctx->used falls to
zero followed by user space to send new data.
This patch changes the behavior to only reset the cipher operation type
(and the IV) if such configuration request is received.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As most (all?) users of algif_skcipher are single-threaded and
therefore always write before reading from an algif_skcipher
socket, they never block and exercise that code-path.
It turns out that code path doesn't even work because we never
reload ctx->used after waking up so we never even see the new
data and immediately return an error (and a loud WARN_ON).
This patch fixes this by always reloading ctx->used.
Reported-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Stephan Mueller <smueller@chronox.de>
Compiler dead store optimization can sometimes remove final calls
to memset() used to clear sensitive data at the end of a function.
Replace trailing memset() calls with memzero_explicit() to
preclude unwanted removal.
Signed-off-by: Nickolaus Woodruff <nickolauswoodruff@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the crypto- prefix for the DRBG implementations.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This adds the module loading prefix "crypto-" to the template lookup
as well.
For example, attempting to load 'vfat(blowfish)' via AF_ALG now correctly
includes the "crypto-" prefix at every level, correctly rejecting "vfat":
net-pf-38
algif-hash
crypto-vfat(blowfish)
crypto-vfat(blowfish)-all
crypto-vfat
Reported-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
To allow automatic loading of the crypto_user kernel module, the netlink
MODULE_ALIAS is added.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu