g33 seems to sit somewhere between the 915/945/965 style and the
g4x style. The bits look like g4x, but we still need to do a full
reset including display.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
915/945 have the same reset registers as 965, so share the code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
On pre-ctg GPU reset also resets the display hardware. Force a mode
restore after the GPU reset, and also re-init clock gating.
v2: Use intel_modeset_init_hw() instead of intel_init_clock_gating()
in case more relevant stuff gets added there at some point
Restore interrupts after the reset as well
Tested-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
On pre-ctg the reset bit directly controls the reset signal. We must
assert it for >=20usec and then deassert it. Bit 1 is a RO status bit
which should also go down when the reset is no longer asserted.
Tested-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There's quite a few bug reports with error states where the error
reasons makes just about no sense at all. Like dying on tlbs for a
display plane that's not even there. Also users don't really report a
lot of bad side effects generally, just the error states.
Furthermore we don't even enable these interrupts any more on gen5+
(though the handling code is still there). So this mostly concerns old
platforms.
Given all that lets make our lives a bit easier and stop capturing
error states, in the hopes that we can just ignore them. In case
that's not true and the gpu indeed dies the hangcheck should
eventually kick in. And I've left some debug log in to make this case
noticeble. Referenced bug is just an example.
v2: Fix missing \n Jani spotted.
References: https://bugs.freedesktop.org/show_bug.cgi?id=82095
References: https://bugs.freedesktop.org/show_bug.cgi?id=85944
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The problem here is that SNA pins batchbuffers to etch out a bit more
performance. Iirc it started out as a w/a for i830M (which we've
implemented in the kernel since a long time already). The problem is
that the pin ioctl wasn't added in
commit d23db88c3a
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri May 23 08:48:08 2014 +0200
drm/i915: Prevent negative relocation deltas from wrapping
Fix this by simply disallowing pinning from userspace so that the
kernel is in full control of batch placement again. Especially since
distros are moving towards running X as non-root, so most users won't
even be able to see any benefits.
UMS support is dead now, but we need this minimal patch for
backporting. Follow-up patch will remove the pin ioctl code
completely.
Note to backporters: You must have both
commit b45305fce5
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Mon Dec 17 16:21:27 2012 +0100
drm/i915: Implement workaround for broken CS tlb on i830/845
which laned in 3.8 and
commit c4d69da167
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Mon Sep 8 14:25:41 2014 +0100
drm/i915: Evict CS TLBs between batches
which is also marked cc: stable. Otherwise this could introduce a
regression by disabling the userspace w/a without the kernel w/a being
fully functional on i830/45.
References: https://bugs.freedesktop.org/show_bug.cgi?id=76554#c116
Cc: stable@vger.kernel.org # requires c4d69da167 and v3.8
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
In all likelihood we will do a few hundred errnoneous register
operations if we do a single invalid register access whilst the device
is suspended. As each instance causes a WARN, this floods the system
logs and can make the system unresponsive.
The warning was first introduced in
commit b2ec142cb0
Author: Paulo Zanoni <paulo.r.zanoni@intel.com>
Date: Fri Feb 21 13:52:25 2014 -0300
drm/i915: call assert_device_not_suspended at gen6_force_wake_work
and despite the claims the WARN is still encountered in the wild today.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
CHV infoframes were not being enabled.
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When doing a nop modeset we currently leave crtc->new_config point at
the already freed temporary pipe_config. That will anger the sanity
checks in intel_modeset_update_state() when the nop modeset gets
followed by a GPU reset on gen3/4 where the display block gets fully
reinitialized during the reset.
So leave crtc->new_config alone until we know a modeset is actually
required.
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The DRM connector's encoder pointer is managed internally by the DRM
core and set to NULL when the DRM connector is disconnected from the
CRTC it was attached to. This results in a NULL pointer dereference in
the HDMI connector functions when trying to call the associated slave
encoder's operations.
Fix this by retrieving the slave encoder pointer from the R-Car
connector structure instead of the DRM connector structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
drm-intel-next-2014-11-21:
- infoframe tracking (for fastboot) from Jesse
- start of the dri1/ums support removal
- vlv forcewake timeout fixes (Imre)
- bunch of patches to polish the rps code (Imre) and improve it on bdw (Tom
O'Rourke)
- on-demand pinning for execlist contexts
- vlv/chv backlight improvements (Ville)
- gen8+ render ctx w/a work from various people
- skl edp programming (Satheeshakrishna et al.)
- psr docbook (Rodrigo)
- piles of little fixes and improvements all over, as usual
* tag 'drm-intel-next-2014-11-21-fixed' of git://anongit.freedesktop.org/drm-intel: (117 commits)
drm/i915: Don't pin LRC in GGTT when dumping in debugfs
drm/i915: Update DRIVER_DATE to 20141121
drm/i915/g4x: fix g4x infoframe readout
drm/i915: Only call mod_timer() if not already pending
drm/i915: Don't rely upon encoder->type for infoframe hw state readout
drm/i915: remove the IRQs enabled WARN from intel_disable_gt_powersave
drm/i915: Use ggtt error obj capture helper for gen8 semaphores
drm/i915: vlv: increase timeout when setting idle GPU freq
drm/i915: vlv: fix cdclk setting during modeset while suspended
drm/i915: Dump hdmi pipe_config state
drm/i915: Gen9 shadowed registers
drm/i915/skl: Gen9 multi-engine forcewake
drm/i915: Read power well status before other registers for drpc info
drm/i915: Pin tiled objects for L-shaped configs
drm/i915: Update ring freq for full gpu freq range
drm/i915: change initial rps frequency for gen8
drm/i915: Keep min freq above floor on HSW/BDW
drm/i915: Use efficient frequency for HSW/BDW
drm/i915: Can i915_gem_init_ioctl
drm/i915: Sanitize ->lastclose
...
Not just the userspace relocs, otherwise we won't wait
for a swapped out page tables to be swapped in again.
v2: rebased on Alex current drm-fixes-3.18
Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Original code sent always 0 as the index number of the node. This patch fixes
this bug by sending a variable which is incremented per node.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
This patch fixes a device QCM bug, where the number of queues were not
counted correctly for the operation of update queue. The count was incorrect
as there was no regard to the previous state of the queue.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
LRC object does not need to be mapped into the GGTT when dumping. A side-effect
of this patch is that a compiler warning goes away (not checking return value
of i915_gem_obj_ggtt_pin).
v2: Broke out individual context dumping into a new function as the indentation
was getting a bit crazy. Added notification of contexts with no gem object for
debugging purposes. Removed unnecessary pin_pages and unpin_pages, replaced
with explicit get_pages for the context object as there may be no backing store
allocated at this time (Comment for get_pages says "Ensure that the associated
pages are gathered from the backing storage and pinned into our object").
Improved error checking - get_pages and get_page are checked for failure.
Signed-off-by: Thomas Daniel <thomas.daniel@intel.com>
[danvet: Align paramter continuation lines properly. Also add some
braces to the nested loops again for readability.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Otherwise we'll have backtraces in assert_panel_unlocked because the
BIOS locks the register. In the reporter's case this regression was
introduced in
commit c31407a367
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu Oct 18 21:07:01 2012 +0100
drm/i915: Add no-lvds quirk for Supermicro X7SPA-H
Reported-by: Alexey Orishko <alexey.orishko@gmail.com>
Cc: Alexey Orishko <alexey.orishko@gmail.com>
Cc: stable@vger.kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Francois Tigeot <ftigeot@wolfpond.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Tested-by: Alexey Orishko <alexey.orishko@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This patch adds the basic structure of a DRM Driver for Rockchip Socs.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Apparently PCH fifo underruns are tricky, we have plenty reports that
we see the occasional underrun (especially at boot-up).
So for a change let's see what happens when we don't re-enable pch
fifo underrun reporting when the pipe is disabled. This means that the
kernel can't catch pch fifo underruns when they happen (except when
all pipes are on on the pch). But we'll still catch underruns when
disabling the pipe again. So not a terrible reduction in test
coverage.
Since the DRM_ERROR is new and hence a regression plan B would be to
revert it back to a debug output. Which would be a lot worse than this
hack for underrun test coverage in the wild. See the referenced
discussions for more.
References: http://mid.gmane.org/CA+gsUGRfGe3t4NcjdeA=qXysrhLY3r4CEu7z4bjTwxi1uOfy+g@mail.gmail.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85898
References: https://bugs.freedesktop.org/show_bug.cgi?id=85898
References: https://bugs.freedesktop.org/show_bug.cgi?id=86233
References: https://bugs.freedesktop.org/show_bug.cgi?id=86478
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Tested-by: lu hua <huax.lu@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
- Tegra K1 voltage support, and coherency improvements
- GM204 support (modesetting, still waiting on NVIDIA for signed fw to
proceed further), and a lot of bios/i2c/devinit adjustments needed to
support it
- GT21x memory reclocking work
- Various other bits and pieces, most of which are prep-work for a
couple of bigger projects I didn't get finished in time
* 'linux-3.19' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (73 commits)
drm/nv50/kms: drop requirement that framebuffer bos be contig up-front
drm/nv50/kms: directly use cursor image from userspace buffer
drm/nouveau/kms: when pinning display-related buffers, force contig vram
drm/nouveau: teach nouveau_bo_pin() how to force a contig vram allocation
drm/nouveau/volt: add support for GK20A
drm/nouveau/platform: add GPU speedo information to nouveau platform
drm/nouveau/volt: allow non-bios voltage scaling
drm/gf100-/gr: return non-fatal error code when fw not present
drm/nouveau/devinit: bump priv ring timeouts before executing scripts
drm/nouveau/bios: translate ramcfg strap through M0203
drm/nouveau/fb: make use of M0203 routines for ram type determination
drm/nouveau/bios: add parsing of BIT M(v2) +0x03 table
drm/nouveau/core: allow vbios parsing without knowing chipset type
drm/nouveau/lib: add null backend
drm/nouveau/device: store revision
drm/nouveau/core: add some forgotten subdevs to disable mask
drm/gk20a/clk: fix max VCO value
drm/nouveau: we need pin_refcnt for nouveau_bo_placement_set()
drm/nv50-/kms: add some evo tracing ability for debugging
drm/nv50/kms: use sclass() instead of trial-and-error
...
Preparation for transition to planes, which use framebuffers for the
cursor image. We've always done copies from the userspace buffer up
until now for legacy reasons, there's no good reason to do so on the
chipsets this code covers.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We have the ability to move buffers around in the kernel if necessary,
and should probably use it rather than failing if userspace passes us
a non-contig buffer for a plane.
The NOUVEAU_GEM_TILE_NONCONTIG flag from userspace will become a mere
initial placement hint once all the relevant paths have been updated.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The voltage value are calculated by the hardware characterized
result.
Signed-off-by: Vince Hsu <vinceh@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
For GK20A we need the GPU speedo value to calculate voltage levels.
Signed-off-by: Vince Hsu <vinceh@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Move the vbios parsing out of init() and call it conditionally if the
platform has a vbios. Non-vbios platforms can use the ctor() to init the
data structures.
Signed-off-by: Vince Hsu <vinceh@nvidia.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
A machine has been spotted where the ramcfg strap is "8", and the ramcfg
xlat table goes 0-7,0-7, resulting in us selecting config 0 for memory
items. On this particular system, config "8" is available and supposed
to be used. It appears that starting from GT21x (where Mv2 appears),
we're supposed to use the value in this table instead.
One concern here is that not all the places we currently use ramcfg xlat
are supposed to be treated the same now. The strap xlat table wasn't
removed from the vbios either, presumably for some kind of good reason.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We only support one kind of matching here (ramcfg strap), but it appears
alternate methods are possible. I wrote a tool to scan our vbios repo
for other types, but did not see any used. Hopefully this means there
aren't any in the wild that will now break.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
For some reason max_vco was set to a lower value that it can support,
which prevented some clock states to be applied. Fix this by setting it
to the same value as downstream.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
On architectures for which access to GPU memory is non-coherent,
caches need to be flushed and invalidated explicitly when BO control
changes between CPU and GPU.
This patch adds buffer synchronization functions which invokes the
correct API (PCI or DMA) to ensure synchronization is effective.
Based on the TTM DMA cache helper patches by Lucas Stach.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Specify TTM_PL_FLAG_UNCACHED when allocating GPFIFOs and fences to
allow them to be safely accessed by the kernel without being synced
on non-coherent architectures.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Allow nouveau_bo_new() to recognize the TTM_PL_FLAG_UNCACHED flag, which
means that we want the allocated BO to be perfectly coherent between the
CPU and GPU. This is useful on non-coherent architectures for which we
do not want to manually sync some rarely-accessed buffers: typically,
fences and pushbuffers.
A TTM BO allocated with the TTM_PL_FLAG_UNCACHED on a non-coherent
architecture will be populated using the DMA API, and accesses to it
performed using the coherent mapping performed by dma_alloc_coherent().
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Add a function allowing us to know whether a device is CPU-coherent,
i.e. accesses performed by the CPU on GPU-mapped buffers will
be immediately visible on the GPU side and vice-versa.
For now, a device is considered to be coherent if it uses the PCI bus on
a non-ARM architecture.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Pinned BOs are supposed to remain in their current location until
unpinned. Display a warning for the supposedly-erroneous case where we
are trying to move such objects.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Probably missing something here, doesn't make a lot of sense to write
or+link data into a register whose offset is calculated by the same
or+link info..
This is the all I've witnessed the binary driver and vbios doing so
far, so it'll do.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The binary driver has been doing this since GF119, and we've somehow
gotten away with it. But, TMDS that hasn't been initialised already
by the x86 vbios code is distorted without it on GM204.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Logging at trace level, rather than as en error, as it seems conceivable
that failure could be normal under certain circumstances (new bios,
older sink that doesn't support a particular DPCD address)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Starting from GM204, certain registers are no longer accessible by the host
(or unsigned PMU firmware).
This commit implements devinit on PMU, using a signed microcode image, and
devinit data, from the VBIOS.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The field at +0x2 is technically processor specific, though I don't know
that it's ever mattered in practice (yet).
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We're about to need to be able to fetch additional chunks of data beyond
the primary bios image, which makes fetching a lot more complicated.
This splits out the verious shadowing routines to be nothing more than
very dumb "fetch this much data from this offset" routines, and leaves
the logic of what and how much to fetch in common code.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Just a couple of fixes for the fallout from the fence rework.
* 'linux-3.18' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/nouveau/gf116: remove copy1 engine
drm/nouveau: prevent stale fence->channel pointers, and protect with rcu
drm/nouveau/fifo/g84-: ack non-stall interrupt before handling it
Indications are that no GF116's actually have a copy engine there, but
actually have the decompression engine. This engine can be made to do
copies, but that should be done separately.
Unclear why this didn't turn up on all GF116's, but perhaps the
non-mobile ones came with enough VRAM to not trigger ttm migrations in
test scenarios.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=85465
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=59168
Cc: stable@vger.kernel.org
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Closes a very unlikely race that can occur if another NonStallInterrupt
method passes between checking fences and acking the previous interrupt.
With this change, the interrupt will re-fire under such conditions.
Tested-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
add gpio bitbanging i2c adapter on LPC device of atom e6xx
gpu chipset to access lvds EDID
tested on SECO QuadMo747-E6xx-EXTREME Qseven platform
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Jan Safrata <jan.nikitenko@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
So here's a pile of atomic fixes and improvements from various people.
There's still more patches in-flight, so I think I'll keep collecting them
in a separate branch.
* tag 'topic/core-stuff-2014-11-28' of git://anongit.freedesktop.org/drm-intel:
drm/atomic: clear plane's CRTC and FB when shutting down
drm: Handle atomic state properly in kms getfoo ioctl
drm: use mode_object_find helpers
drm: fix indentation
drm/msm: switch to atomic-helpers iterator macros
drm/atomic: add plane iterator macros
drm/atomic: track bitmask of planes attached to crtc
drm: Free atomic state during cleanup
drm: Make drm_atomic.h standalone includible
drm: Make drm_atomic_helper.h standalone includible
drm/plane: Add missing kerneldoc
drm/plane: Pass old state to ->atomic_update()
drm/atomic_helper: Cope with plane->crtc == NULL in disable helper
drm/atomic: Drop per-plane locking TODO
drm/atomic-helper: Skip vblank waits for unchanged fbs
drm: Document that drm_dev_alloc doesn't need a parent
The function will also be used by a later patch, so factor it out.
V2: make raw_edid const, define/declare before first use
V3: fix erroneuos removal of csum variable
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There is no need to dump the whole EDID block in case it contains no
information. Just print a single line stating the block is empty instead
of 8 lines containing only zeroes.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm_edid_is_zero will be used by drm_edid_block valid, move it up.
raw_edid argument can be const.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull drm fixes from Dave Airlie:
"Two i915 regressions and one dual-gpu laptop radeon fix"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: report disconnected for LVDS/eDP with PX if ddc fails
drm/i915: Cancel vdd off work before suspend
drm/i915: Ignore SURFLIVE and flip counter when the GPU gets reset
Two regression fixes from Ville.
* tag 'drm-intel-fixes-2014-11-27' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Cancel vdd off work before suspend
drm/i915: Ignore SURFLIVE and flip counter when the GPU gets reset
Otherwise we'd still end up w/ the plane attached to the CRTC, and
seemingly active, but without an FB. Which ends up going *boom*
in the drivers.
Slightly modified version of Daniel's irc suggestion.
Note that the big problem isn't drivers going *boom* here (since we
already have the situation of planes being left enabled when the crtc
goes down). The real issue is that the core assumes the primary plane
always goes down when calling ->set_config with a NULL mode. Ignoring
that assumption leads to the legacy state pointers plane->fb/crtc
getting out of sync with atomic, and that then leads to the subsequent
*boom* all over the place.
CC: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Rob Clark <robdclark@gmail.com>
[danvet: Drop my opinion of what's going sidewides here into the
commit message as a note.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
So the problem with async commit (especially async modeset commit) is
that the legacy pointers only get updated after the point of no
return, in the async part of the modeset sequence. At least as
implemented by the current helper functions. This is done in the
set_routing_links function in drm_atomic_helper.c.
Which also means that access isn't protected by locks but only
coordinated by synchronizing with async workers. No problem thus far,
until we lock at the getconnector/encoder ioctls.
So fix this up by adding special cases for atomic drivers: For those
we need to look at state objects. Unfortunately digging out the
correct encoder->crtc link is a bit of work, so wrap this up in a
helper function.
Moving the assignments of connector->encoder and encoder->crtc earlier
isn't a good idea because the point of the atomic helpers is that we
stage the state updates. That way the disable functions can still
inspect the links and rely upon them.
v2: Extract full encoder->crtc lookup into helper (Rob).
v3: Extract drm_connector_get_encoder too since - we need to always
return state->best_encoder when there is a state otherwise we might
return stale data if there's a pending async disable (and chase
unlocked pointers, too). Same issue with encoder_get_crtc but there
it's a bit more tricky to handle.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Lightly-Tested-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Chasing plane->state->crtc of planes that are *not* part of the same
atomic update is racy, making it incredibly awkward (or impossible) to
do something simple like iterate over all planes and figure out which
ones are attached to a crtc.
Solve this by adding a bitmask of currently attached planes in the
crtc-state.
Note that the transitional helpers do not maintain the plane_mask. But
they only support the legacy ioctls, which have sufficient brute-force
locking around plane updates that they can continue to loop over all
planes to see what is attached to a crtc the old way.
Signed-off-by: Rob Clark <robdclark@gmail.com>
[danvet:
- Drop comments about locking in set_crtc_for_plane since they're a
bit misleading - we already should hold lock for the current crtc.
- Also WARN_ON if get_state on the old crtc fails since that should
have been done already.
- Squash in fixup to check get_plane_state return value, reported by
Dan Carpenter and acked by Rob Clark.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If ddc fails, presumably the i2c mux (and hopefully the signal
mux) are switched to the other GPU so don't fetch the edid from
the vbios so that the connector reports disconnected.
bug:
https://bugzilla.opensuse.org/show_bug.cgi?id=904417
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The branch is based on a merge of drm-next and Simon's tags/renesas-dt-du-for-
v3.19 available at
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git, the latter
having been pulled in the ARM SoC tree for v3.19.
Compared to v1, I've rebased my branch on a later drm-next, added Julia's
error return code fix, and documented the "drm: Decouple EDID parsing from I2C
adapter" patch properly.
v1:
Here's a pull request that adds HDMI support to the R-Car DU driver, including
a new slave encoder driver for the adv7511.
* 'drm/du/adv7511' of git://linuxtv.org/pinchartl/fbdev:
drm: Add adv7511 encoder driver
video: Add ADV751[13] DT bindings documentation
drm: Decouple EDID parsing from I2C adapter
drm: rcar-du: Add HDMI encoder and connector support
drm: rcar-du: Replace drm_encoder with drm_slave_encoder
drm: rcar-du: Replace direct DRM encoder access with cast macro
drm: rcar-du: Pass the encoder DT node to rcar_du_encoder_init()
drm: rcar-du: Remove platform data support
drm: rcar-du: fix error return code
ARM: shmobile: koelsch: Enable DU device in DT
ARM: shmobile: koelsch-reference: Remove DU platform device
ARM: shmobile: lager: Enable DU device in DT
ARM: shmobile: lager-reference: Remove DU platform device
ARM: shmobile: marzen: Enable DU device in DT
ARM: shmobile: dts: Add common file for AA104XD12 panel
ARM: shmobile: r8a7791: Add DU node to device tree
ARM: shmobile: r8a7790: Add DU node to device tree
ARM: shmobile: r8a7779: Add DU node to device tree
ARM: shmobile: Remove FSF address from copyright headers
- Fixes for sparse warnings
- Memory leak fixes
- Fix for deadlock between amdkfd and iommu
* 'amdkfd-next-3.19' of git://people.freedesktop.org/~gabbayo/linux:
amdkfd: delete some dead code
amdkfd: Fix memory leak of mqds on dqm fini
amdkfd: fix an error handling bug in pqm_create_queue()
amdkfd: fix some error handling in ioctl
amdkfd: Remove DRM_AMDGPU dependency from Kconfig
amdkfd: explicitely include io.h in kfd_doorbell.c
amdkfd: Clear ctx cb before suspend
amdkfd: Instead of using get function, use container_of
amdkfd: use schedule() in sync_with_hw
amdkfd: Fix memory leak on process deregistration
amdkfd: add __iomem attribute to doorbell_ptr
amdkfd: fence_wait_timeout() can be static
amdkfd: is_occupied() can be static
amdkfd: Fix sparse warnings in kfd_flat_memory.c
amdkfd: pqm_get_kernel_queue() can be static
amdkfd: test_kq() can be static
amdkfd: Fix sparse warnings in kfd_topology.c
amdkfd: Fix sparse warnings in kfd_chardev.c
This patch adds a driver for the Analog Devices adv7511. The adv7511 is
a standalone HDMI transmitter chip. It features a HDMI output interface
on one end and video and audio input interfaces on the other.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The drm_get_edid() function performs direct I2C accesses to read EDID
blocks, assuming that the monitor DDC interface is directly connected to
the I2C bus. It can't thus be used with HDMI encoders that control the
DDC bus and expose EDID blocks through a different interface.
Refactor drm_do_get_edid() to take a block read callback function
instead of an I2C adapter, and export it for direct use by drivers.
As in the general case the DDC bus is accessible by the kernel at the
I2C level, drivers must make all reasonable efforts to expose it as an
I2C adapter and use drm_get_edid() instead of abusing this function.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
SoCs that integrate the DU have no internal HDMI encoder, support
external encoders only.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
DRM slave encoders require their associated struct drm_encoder instance
to be embedded in a struct drm_slave_encoder. This makes processing
encoders regardless of their types needlessly and painfully complex in
drivers that use a mix of slave encoders and custom encoders. Such a
driver will need to either create drm_slave_encoder instances that fake
their embedded encoder instance, or to turn all drm_encoder instances
into drm_slave_encoder instances.
Between the two evils, one must choose the lesser. Use drm_slave_encoder
everywhere.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add a new macro to downcast an rcar_du_encoder pointer to a drm_encoder
pointer and use it. This prepares for the replacement of the
rcar_drm_encoder encoder field with a drm_slave_encoder.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The encoder DT node will be needed to register an external HDMI encoder.
Pass it to the rcar_du_encoder_init() function to prepare for HDMI
support.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
All platforms now instantiate the DU through DT, platform data support
isn't needed anymore.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Propagate the error code on failure.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
identifier ret; expression e1,e2;
@@
(
if (\(ret < 0\|ret != 0\))
{ ... return ret; }
|
ret = 0
)
... when != ret = e1
when != &ret
*if(...)
{
... when != ret = e2
when forall
return ret;
}
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Currently we just make sure vdd is off before suspending, but we don't
cancel the vdd off work. The work wil not touch vdd if
want_panel_vdd==false so in theory this is fine.
In the past that was perfectly fine since the vdd off work didn't do
anything when want_panel_vdd==false, so even if the work would have been
run during system resume before i915 has resumed, nothing would happen.
However since pps_lock() will now grab the power domain references before
it can check want_panel_vdd, we may end up toggling the power wells on/off
already before the driver has resumed. That is not really acceptable, so
cancel the vdd off work when suspending the encoder.
The problem appeared when pps_lock() was introduced in:
commit 773538e860
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Thu Sep 4 14:54:56 2014 +0300
drm/i915: Reset power sequencer pipe tracking when disp2d is off
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The drm_prime_pages_to_sg() function never returns NULL pointers, only
error pointers and valid pointers.
Signed-off-by: Haixia Shi <hshi@chromium.org>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes dmabuf export failure with -E_NOMEM when the page is not mapped.
Signed-off-by: Haixia Shi <hshi@chromium.org>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The imx-drm driver was put into staging mostly for the following reasons,
all of which have been addressed or superseded:
- convert the irq driver to use linear irq domains
- work out the device tree bindings, this lead to the common of_graph
bindings being used
- factor out common helper functions, this mostly resulted in the
component framework and drm of_graph helpers.
Before adding new fixes, and certainly before adding new features,
move it into its proper place below drivers/gpu/drm.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Add Exynos4415 SoC support, some fixups and cleanups.
Summary:
- Resolve kernel lockup issue incurred by probe request in probe context.
. For this, it moves all register codes of sub drivers into init function
and adds component binding support for vidi driver.
- Add Exynos4415 SoC support.
- Make each manager and display object to be embedded
in each driver context.
- Fix and clean up FIMD and MIPI-DSI drivers.
- Clean up unnecesary or wrong descriptions.
- And trivial cleanups.
* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (58 commits)
drm/exynos: avoid leak if exynos_dpi_probe() fails
drm/exynos: Fix exynos_dpi_remove() parameter
drm/exynos: vidi: add component support
drm/exynos: fix exynos_drm_component_del
drm/exynos/ipp: fix error return code
drm/exynos: clean up machine compatible string check
drm/exynos: move Exynos platform drivers registration to init
Revert "drm/exynos: fix null pointer dereference issue"
drm/exynos/dpi: stop using display->ctx pointer
drm/exynos/dpi: embed display into private context
drm/exynos/dp: stop using display->ctx pointer
drm/exynos/dp: embed display into private context
drm/exynos/vidi: stop using display->ctx pointer
drm/exynos/vidi: embed display into private context
drm/exynos/hdmi: stop using display->ctx pointer
drm/exynos/hdmi: embed display into private context
drm/exynos/fimd: stop using manager->ctx pointer
drm/exynos/fimd: embed manager into private context
drm/exynos/vidi: stop using manager->ctx pointer
drm/exynos/vidi: embed manager into private context
...
This is dead code. We don't need to unbind here, we can just return
directly.
Reviewed-by: Oded Gabbay <oded.gabbay@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
The mqds array members are not freed when dqm is uninitialized.
Reviewed-by: Ben Goz <Ben.Goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
The current state of CRTCs, planes and connectors currently leaks during
DRM driver ->unload() unless drivers explicitly clean it up. Since there
is nothing driver-specific about it, that cleanup can be done within the
DRM core.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In most situations it will be useful to have the old state passed to the
->atomic_update() callback. For example if a plane is being disabled the
new state's .crtc field will be NULL, but some drivers may rely on this
field to program the CRTCs registers.
v2: rename variable to old_plane_state and remove redundant comment as
suggested by Daniel Vetter, remove an Exynos hunk that doesn't apply to
drm-next and add a hunk for pending MSM mdp5 changes
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The drm core can call the plane disable hook multiple times, which
means it can get called when plane->crtc is already NULL. That in turn
means we can't get at the implicit acquire ctx we use in the atomic
helpers for legacy entries points.
We could try to pass drm_modeset_legacy_acquire_ctx a drm_device
pointer so that it can cope with a NULL crtc. But that still doesn't
work since the cursor ioctls (remapped with the universal cursor plane
support code) only grabs the crtc locks. So the global acquire context
isn't set eitehr.
The real solution here would be to bite the bullet and wire up
explicit acquire context parameters to all relevant functions. We need
to do that anyway (to be able to get rid of some small allocations
which we can't cope with failing). But that's a lot of work and better
done once atomic has settled a bit.
So meanwhile just catch this case in the helper and bail out.
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: Completely rewrite commit message and comment but keep
Jasper's logic and author credits since his patch is the only
short-term solution that works.]
Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I've forgotten to remove that in my per-plane locking patch.
Reported-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Especially with legacy cursor ioctls existing userspace assumes that
you can pile up lots of updates in one go. The super-proper way to
support this would be a special commit mode which overwrites the last
update. But getting there will be quite a bit of work.
Meanwhile do what pretty much all the drivers have done for the plane
update functions: Simply skip the vblank wait for the buffer cleanup
if the buffer is the same. Since the universal cursor plane code will
not recreate framebuffers needlessly this allows us to not slow down
legacy pageflip events while someone moves the cursor around.
v2: Drop the async plane update hunk from a previous attempt at this
issue.
v3: Fix up kerneldoc.
v4: Don't oops so badly. Reported by Jasper.
Cc: Rob Clark <robdclark@gmail.com>
Cc: "Jasper St. Pierre" <jstpierre@mecheye.net>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Tested-by: Jasper St. Pierre <jstpierre@mecheye.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
The call to kernel_queue_uninit(NULL) will trigger a BUG(), and also the
error code is incorrect.
Fixes: 45102048f7 ('amdkfd: Add process queue manager module')
Reviewed-by: Oded Gabbay <oded.gabbay@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
There is a typo here so the errors from kfd_bind_process_to_device()
are not detected.
Reviewed-by: Oded Gabbay <oded.gabbay@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
The component must be deleted if the probe fails.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
exynos_dpi_remove() should receive a exynos_drm_display but when
DRM_EXYNOS_DPI was disabled it was receiving a struct device resulting in
ia compiler warning.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch adds component support for vidi driver.
vidi driver is a kms driver so it doesn't need to be registered
to exynos_drm_subdrv_list. For this, it changes for the component
framework to be used for vidi driver.
This patch fixes below error also,
# echo 1 > /sys/devices/platform/exynos-drm-vidi/connection
[ 55.618529] ------------[ cut here ]------------
[ 55.621960] WARNING: CPU: 0 PID: 1397 at drivers/gpu/drm/drm_irq.c:1203 exynos_drm_crtc_dpms+0x88/0x17c()
[ 55.631268] Modules linked in:
[ 55.634278] CPU: 0 PID: 1397 Comm: sh Not tainted 3.18.0-rc2-146253-g31449d7 #1154
[ 55.641885] [<c0014400>] (unwind_backtrace) from [<c0011570>] (show_stack+0x10/0x14)
[ 55.649597] [<c0011570>] (show_stack) from [<c04764f4>] (dump_stack+0x84/0xc4)
[ 55.656802] [<c04764f4>] (dump_stack) from [<c00218b8>] (warn_slowpath_common+0x6c/0x88)
[ 55.664866] [<c00218b8>] (warn_slowpath_common) from [<c0021970>] (warn_slowpath_null+0x1c/0x24)
[ 55.673632] [<c0021970>] (warn_slowpath_null) from [<c027a780>] (exynos_drm_crtc_dpms+0x88/0x17c)
[ 55.682482] [<c027a780>] (exynos_drm_crtc_dpms) from [<c027a910>] (exynos_drm_crtc_commit+0x14/0x44)
[ 55.691622] [<c027a910>] (exynos_drm_crtc_commit) from [<c025521c>] (drm_crtc_helper_set_mode+0x3d0/0x51c)
[ 55.701233] [<c025521c>] (drm_crtc_helper_set_mode) from [<c0255d68>] (drm_crtc_helper_set_config+0x87c/0x9dc)
[ 55.711230] [<c0255d68>] (drm_crtc_helper_set_config) from [<c026afa8>] (drm_mode_set_config_internal+0x58/0xd4)
[ 55.721380] [<c026afa8>] (drm_mode_set_config_internal) from [<c025c208>] (restore_fbdev_mode+0xcc/0xec)
[ 55.730834] [<c025c208>] (restore_fbdev_mode) from [<c025c244>] (drm_fb_helper_restore_fbdev_mode_unlocked+0x1c/0x30)
[ 55.741424] [<c025c244>] (drm_fb_helper_restore_fbdev_mode_unlocked) from [<c025e0a8>] (drm_fb_helper_set_par+0x1c/0x60)
[ 55.752271] [<c025e0a8>] (drm_fb_helper_set_par) from [<c025e174>] (drm_fb_helper_hotplug_event+0x88/0xc4)
[ 55.761906] [<c025e174>] (drm_fb_helper_hotplug_event) from [<c02571c4>] (drm_helper_hpd_irq_event+0xc8/0x134)
[ 55.771898] [<c02571c4>] (drm_helper_hpd_irq_event) from [<c028e27c>] (vidi_store_connection+0x90/0xc8)
[ 55.781268] [<c028e27c>] (vidi_store_connection) from [<c0125f80>] (kernfs_fop_write+0xc0/0x180)
[ 55.790045] [<c0125f80>] (kernfs_fop_write) from [<c00cdf60>] (vfs_write+0xa0/0x1ac)
[ 55.797757] [<c00cdf60>] (vfs_write) from [<c00ce468>] (SyS_write+0x44/0x9c)
[ 55.804790] [<c00ce468>] (SyS_write) from [<c000e6a0>] (ret_fast_syscall+0x0/0x30)
[ 55.812328] ---[ end trace 3c0fe4386702d4dd ]---
This issue occurs when modeset to vidi is tried in case that drm_vblank_init
is called prior to crtc creation of vidi driver. In this case, crtc number
of vidi is invalid so any requests with the crtc number will fail.
This patch guarantees drm_vblank_init to be called after all kms drivers
are ready by using component framework.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch resolves the issue that component object isn't removed
correctly.
A given component object couldn't be placed to head of drm_component_list
so all component objects added to the drm_component_list should be checked
to remove the given component object.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Propagate the returned error code on failure.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
identifier ret; expression e1,e2;
@@
(
if (\(ret < 0\|ret != 0\))
{ ... return ret; }
|
ret = 0
)
... when != ret = e1
when != &ret
*if(...)
{
... when != ret = e2
when forall
return ret;
}
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Registering the Exynos DRM subdevices platform drivers in the probe
function is causing an infinite loop. Fix this by moving it to the
exynos_drm_init() function to register the drivers on module init.
Registering drivers in the probe functions causes a deadlock in the parent
device lock. See Grant Likely explanation on the topic:
"I think the problem is that exynos_drm_init() is registering a normal
(non-OF) platform device, so the parent will be /sys/devices/platform.
It immediately gets bound against exynos_drm_platform_driver which
calls the exynos drm_platform_probe() hook. The driver core obtains
device_lock() on the device *and on the device parent*.
Inside the probe hook, additional platform_drivers get registered.
Each time one does, it tries to bind against every platform device in
the system, which includes the ones created by OF. When it attempts to
bind, it obtains device_lock() on the device *and on the device
parent*.
Before the change to move of-generated platform devices into
/sys/devices/platform, the devices had different parents. Now both
devices have /sys/devices/platform as the parent, so yes they are
going to deadlock.
The real problem is registering drivers from within a probe hook. That
is completely wrong for the above deadlock reason. __driver_attach()
will deadlock. Those registrations must be pulled out of .probe().
Registering devices in .probe() is okay because __device_attach()
doesn't try to obtain device_lock() on the parent."
INFO: task swapper/0:1 blocked for more than 120 seconds.
Not tainted 3.18.0-rc3-next-20141105 #794
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
swapper/0 D c052534c 0 1 0 0x00000000
[<c052534c>] (__schedule) from [<c0525b34>] (schedule_preempt_disabled+0x14/0x20)
[<c0525b34>] (schedule_preempt_disabled) from [<c0526d44>] (mutex_lock_nested+0x1c4/0x464
[<c0526d44>] (mutex_lock_nested) from [<c02be908>] (__driver_attach+0x48/0x98)
[<c02be908>] (__driver_attach) from [<c02bcc00>] (bus_for_each_dev+0x54/0x88)
[<c02bcc00>] (bus_for_each_dev) from [<c02bdce0>] (bus_add_driver+0xe4/0x200)
[<c02bdce0>] (bus_add_driver) from [<c02bef94>] (driver_register+0x78/0xf4)
[<c02bef94>] (driver_register) from [<c029e99c>] (exynos_drm_platform_probe+0x34/0x234)
[<c029e99c>] (exynos_drm_platform_probe) from [<c02bfcf0>] (platform_drv_probe+0x48/0xa4)
[<c02bfcf0>] (platform_drv_probe) from [<c02be680>] (driver_probe_device+0x13c/0x37c)
[<c02be680>] (driver_probe_device) from [<c02be954>] (__driver_attach+0x94/0x98)
[<c02be954>] (__driver_attach) from [<c02bcc00>] (bus_for_each_dev+0x54/0x88)
[<c02bcc00>] (bus_for_each_dev) from [<c02bdce0>] (bus_add_driver+0xe4/0x200)
[<c02bdce0>] (bus_add_driver) from [<c02bef94>] (driver_register+0x78/0xf4)
[<c02bef94>] (driver_register) from [<c029e938>] (exynos_drm_init+0x70/0xa0)
[<c029e938>] (exynos_drm_init) from [<c00089b0>] (do_one_initcall+0xac/0x1f0)
[<c00089b0>] (do_one_initcall) from [<c074bd90>] (kernel_init_freeable+0x10c/0x1d8)
[<c074bd90>] (kernel_init_freeable) from [<c051eabc>] (kernel_init+0x8/0xec)
[<c051eabc>] (kernel_init) from [<c000f268>] (ret_from_fork+0x14/0x2c)
3 locks held by swapper/0/1:
#0: (&dev->mutex){......}, at: [<c02be908>] __driver_attach+0x48/0x98
#1: (&dev->mutex){......}, at: [<c02be918>] __driver_attach+0x58/0x98
#2: (&dev->mutex){......}, at: [<c02be908>] __driver_attach+0x48/0x98
Changelog v2:
- call platform_driver_register after all kms and non kms drivers are
registered
- rebased it to exynos-drm-next
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This reverts commit cea24824ab432f8acabb254d6805e9aa756de6af.
Moving subdriver probe to exynos_drm_platform_probe() was making
exynos_drm_device_subdrv_probe() fail because the platform data wasn't set
yet. It only gets set in exynos_drm_load.
We need to find a smarter way to fix this issue.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The patch replaces accesses to display->ctx pointer by container_of
construct. The field is removed as well as dpi was the last user of it.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
exynos_drm_display is used by internal Exynos DRM framework for
representing encoder:connector pair. As it should be mapped 1:1 to dpi
private context it seems more reasonable to embed it directly in that context.
As a result further code simplification will be possible.
Moreover it will be possible to handle multiple dpi devices in the system.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The patch replaces accesses to display->ctx pointer by container_of
construct. It will allow to remove ctx field in the future.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
exynos_drm_display is used by internal Exynos DRM framework for
representing encoder:connector pair. As it should be mapped 1:1 to dp
private context it seems more reasonable to embed it directly in that context.
As a result further code simplification will be possible.
Moreover it will be possible to handle multiple dp devices in the system.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The patch replaces accesses to display->ctx pointer by container_of
construct. It will allow to remove ctx field in the future.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
exynos_drm_display is used by internal Exynos DRM framework for
representing encoder:connector pair. As it should be mapped 1:1 to vidi
private context it seems more reasonable to embed it directly in that context.
As a result further code simplification will be possible.
Moreover it will be possible to handle multiple vidi devices in the system.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The patch replaces accesses to display->ctx pointer by container_of
construct. It will allow to remove ctx field in the future.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
exynos_drm_display is used by internal Exynos DRM framework for
representing encoder:connector pair. As it should be mapped 1:1 to hdmi
private context it seems more reasonable to embed it directly in that context.
As a result further code simplification will be possible.
Moreover it will be possible to handle multiple hdmi devices in the system.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The patch replaces accesses to manager->ctx pointer by container_of
construct. As fimd was the last user of ctx the patch removes
this field as well.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
exynos_drm_manager is used by internal Exynos DRM framework for
representing crtc. As it should be mapped 1:1 to fimd private context
it seems more reasonable to embed it directly in that context.
As a result further code simplification will be possible.
Moreover it will be possible to handle multiple FIMD devices in the system.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The patch replaces accesses to manager->ctx pointer by container_of
construct. It will allow to remove ctx field in the future.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
exynos_drm_manager is used by internal Exynos DRM framework for
representing crtc. As it should be mapped 1:1 to vidi private context
it seems more reasonable to embed it directly in that context.
As a result further code simplification will be possible.
Moreover it will be possible to handle multiple mixer devices in the system.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The patch replaces accesses to manager->ctx pointer by container_of
construct. It will allow to remove ctx field in the future.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
exynos_drm_manager is used by internal Exynos DRM framework for
representing crtc. As it should be mapped 1:1 to fimd private context
it seems more reasonable to embed it directly in that context.
As a result further code simplification will be possible.
Moreover it will be possible to handle multiple mixer devices in the system.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The exynos_dsi_te_irq_handler() works only dsi(DPMS) is on.
So it is enough to enable and disable TE GPIO IRQ in
exynos_dsi_enable(disable)_irq() like DSI IRQ.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>a
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The drm_helper_hpd_irq_event() does dpms control and
the panel is initialized and displayed on by it.
So the exynos_dsi_te_irq_handler() should be registered
beforehand.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The drm_handle_vblank should be called whenever be vsync, te interrupt
means vsync on i80 interface.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
There is a case like set config which requires triggering
but vblank is not enabled yet.
So triggering unset routine is required to exit from
triggering mode.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
For the I80 interface, the video interrupt pending register(VIDINTCON1)
should be handled in fimd_irq_handler() and the video interrupt control
register(VIDINTCON0) should be handled in fimd_enable_vblank() and
fimd_disable_vblank() like RGB interface.
So this patch moves each set / unset routines into proper positions.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This function is valid only the SoC has SHADOWCON register
and it should be used together with fimd_enable_video_output()
to match the ENWIN_F bit in WINCON# and C#_EN_F bit in SHADOWCON.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This bit is used for video output and logic signal control.
So it is better for readability.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The C#_EN_F in SHADOWCON register is updated per frame.
So it should be protected by fimd_shadow_protect_win().
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
It's better to be checking whether triggerring in fimd_trigger function.
Also it will return if in triggerring on fimd_te_handler, then it can't
execute remain codes.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The exynos fimd provides video type selection bits from system register
but exynos3 series don't has it, so needs has_vtsel flag and we can
distinguish whether set video type selection bits.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
During system resume from suspend to RAM the Exynos DRM driver forced
CRTC mode thus turning display on (DPMS_ON). This lead to runtime resuming
of DSI which failed because whole LCD power domain was off and it was
not allowed to turn on because of system resume in progress.
Forcing mode should not be needed and removing it solves this particular
problem.
This necessary fix for following scenario reproduced on Exynos DRM:
1. Power domain is off before suspending the system.
2. System is suspended to RAM.
3. Resuming starts. The Exynos DRM driver resume callback is called.
4. The Exynos DRM driver calls drm_helper_resume_force_mode() which turns
on the screen by calling exynos_dsi_dpms with DRM_MODE_DPMS_ON.
5. The Exynos DSI driver calls pm_runtime_get. The driver runtime
resumes and this should turn LCD power domain on.
6. Unfortunately the domain cannot be turned on because system resume is
in progress and genpd->prepared_count is positive.
Steps to reproduce:
1. Add runtime PM to Exynos DSI driver.
2. Build Exynos DRM/FB without FRAMEBUFFER_CONSOLE.
3. Enable the connector and screen (e.g. with modeset-vsync).
4. echo 3 > /sys/devices/platform/exynos-drm/graphics/fb0/blank
5. echo mem > /sys/power/state
6. Resume.
[ 77.712469] PM: early resume of devices complete after 3.854 msecs
[ 77.712739] exynos-dsi 11c80000.dsi: pm_genpd_resume()
[ 77.712758] exynos4-fimc 11800000.fimc: pm_genpd_resume()
[ 77.712774] exynos4-fimc 11810000.fimc: pm_genpd_resume()
[ 77.712787] exynos-drm-fimc 11820000.fimc: pm_genpd_resume()
[ 77.712802] exynos-drm-fimc 11830000.fimc: pm_genpd_resume()
[ 77.712815] s5p-mipi-csis 11880000.csis: pm_genpd_resume()
[ 77.712829] s5p-mipi-csis 11890000.csis: pm_genpd_resume()
[ 77.712843] exynos-fimc-lite 12390000.fimc-lite: pm_genpd_resume()
[ 77.712856] exynos-fimc-lite 123a0000.fimc-lite: pm_genpd_resume()
[ 77.713788] exynos4-fb 11c00000.fimd: pm_genpd_resume()
[ 77.713912] wake disabled for irq 184
[ 77.713923] wake disabled for irq 185
[ 77.714082] wake disabled for irq 173
[ 77.715676] wake disabled for irq 176
[ 77.718540] exynos4-fb 11c00000.fimd: pm_genpd_runtime_resume()
[ 77.718567] exynos4-fb 11c00000.fimd: state restore latency exceeded, new value 1708 ns
[ 77.718636] exynos-dsi 11c80000.dsi: pm_genpd_runtime_resume()
[ 77.892366] exynos-dsi 11c80000.dsi: PLL failed to stabilize
[ 77.892377] exynos-dsi 11c80000.dsi: failed to configure DSI PLL
[ 78.192168] exynos-dsi 11c80000.dsi: timeout waiting for reset
[ 78.211578] exynos-dsi 11c80000.dsi: waiting for bus lanes timed out
[ 78.307173] exynos-dsi 11c80000.dsi: xfer timed out: d1 00 (null)
[ 78.307190] panel_s6e8aa0 11c80000.dsi.0: error -110 reading dcs seq(0xd1)
[ 78.307199] panel_s6e8aa0 11c80000.dsi.0: read id failed
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The command mode panel should draw image earlier than the display
on command execution to prevent showing garbage GRAM screen data.
So should set dsi->state as DSIM_STATE_ENABLED between calling
exynos_dsi_set_display_enable() and drm_panel_enable() to transmit
image data before executing display on command.
And moves the display on command execution routine from prepare()
to enable() in drm_panel_funcs also.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
For providing VBLANK information, drm_handle_vblank() should
be called properly, but it is blocked by wait_vsync_event
condition which is set by manager_ops->wait_for_vblank().
So moves it out from wait_vsync_event routine.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
The exynos_drm_crtc_dpms() waits until pended page flip
queue is empty, calls the drm_vblank_off() then calls
manager->ops->dpms() when mode is DRM_MODE_DPMS_OFF.
The fimd_dpms() is one of manager->ops->dpms()s and
finally calls fimd_window_suspend().
But there is no active window and vblank is already off
when it is called.
So addtional waiting vblank is not necessary any more.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Now that we have moved to generic phy based bindings,
we don't need to have any code related to older dptx-phy.
Nobody is using this dptx-phy anymore, so removing the
same.
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
They are not implemented anywhere, so wipe them out.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Description of the @create_connector callback was missing,
and the @manager was no longer needed.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Save a few bytes by compiling them all in the same byte.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This is a leftover, all code using this macro have been removed/
changed already.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Re-declare struct is not a good practice, let's use the original
drm and exynos declarations.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Re-declare struct is not a good practice, let's use the original
drm declarations.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The struct is defined in the same file, declare it here is just
unnecessary
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The struct is defined in the same file, declare it here is just
unnecessary.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
It is not even used in this header anymore.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The patch replaces accesses to display->ctx pointer by container_of
construct. It will allow to remove ctx field in the future.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The patch removes redundant encoder field from private DSI context.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The patch replaces multiple evaluation of device address
with local variable.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
exynos_dsi_display is used by internal Exynos DRM framework for
representing pair encoder->connecter. As it should be mapped 1:1 to dsi
private context it seems more reasonable to embed it directly
in that context. As a result further code simplification will be possible.
Moreover it will be possible to handle multiple DSI devices in the system.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The patch replaces separate calls to driver (de)registration by
loops over the array of drivers. As a result it significantly
decreases number of ifdefs. Additionally it moves device registration
related ifdefs to header file.
Changelog v2:
- Rebased.
- Consider non kms driver in respect to infinite loop issue.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch fixes null pointer dereference issue incurred
when ipp driver is enabled and Exynos drm driver is closed.
Non kms driver should register its own sub driver to setup necessary
resources, which is done by load(). So null pointer dereference
occurs when ipp driver is enabled and Exynos drm driver is closed
because ipp core device is registered after component_master_add_with_match
call.
This patch makes exynos_drm_device_subdrv_probe() to be called after all non
kms drivers are registered.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch fixes a null pointer dereference issue incurred by
calling g2d_remove when exynos_drm_platform_probe is failed.
cmdlist_pool of g2d is allocated when g2d sub driver is probed.
So if exynos_drm_platform_probe is failed, the g2d sub driver is
not probed and the cmdlist_pool is still NULL.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch resovles the infinite loop issue incurred
when Exyno drm driver is enabled but all kms drivers
are disabled on Exynos board by returning -EPROBE_DEFER
only in case that there is kms device registered.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch resolves temporarily infinite loop issue incurred
when Exynos drm driver is enabled and multi-platform kernel
is used by registering Exynos drm device object only in case
of Exynos SoC. So this patch will be replaced with more generic
way later.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
During a GPU reset we need to get pending page flip cleared out
since the ring contents are gone and flip will never complete
on its own. This used to work until the mmio vs. CS flip race
detection came about. That piece of code is looking for a
specific surface address in the SURFLIVE register, but as
a flip to that address may never happen the check may never
pass. So we should just skip the SURFLIVE and flip counter
checks when the GPU gets reset.
intel_display_handle_reset() tries to effectively complete
the flip anyway by calling .update_primary_plane(). But that
may not satisfy the conditions of the mmio vs. CS race
detection since there's no guarantee that a modeset didn't
sneak in between the GPU reset and intel_display_handle_reset().
Such a modeset will not wait for pending flips due to the ongoing GPU
reset, and then the primary plane updates performed by
intel_display_handle_reset() will already use the new surface
address, and thus the surface address the flip is waiting for
might never appear in SURFLIVE. The result is that the flip
will never complete and attempts to perform further page flips
will fail with -EBUSY.
During the GPU reset intel_crtc_has_pending_flip() will return
false regardless, so the deadlock with a modeset vs. the error
work acquiring crtc->mutex was avoided. And the reset_counter
check in intel_crtc_has_pending_flip() actually made this bug
even less severe since it allowed normal modesets to go through
even though there's a pending flip.
This is a regression introduced by me here:
commit 75f7f3ec60
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Tue Apr 15 21:41:34 2014 +0300
drm/i915: Fix mmio vs. CS flip race on ILK+
Testcase: igt/kms_flip/flip-vs-panning-vs-hang
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Some radeon ASICs don't support all 64 address bits of MSIs despite
advertising support for 64-bit MSIs in their configuration space.
This breaks on systems such as IBM POWER7/8, where 64-bit MSIs can
be assigned with some of the high address bits set.
This makes use of the newly introduced "no_64bit_msi" flag in structure
pci_dev to allow the MSI allocation code to fallback to 32-bit MSIs
on those adapters.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
CC: <stable@vger.kernel.org>
---
Adding Alex's review tag. Patch to the driver is identical to the
reviewed one, I dropped the arch/powerpc hunk rewrote the subject
and cset comment.
In disable_outputs() we need to shut down the outgoing encoder, not the
incoming one (we have already swapped-state at this point). Without
this, we end up telling the driver to crtc->dpms(OFF) without first
encoder->dpms(OFF), and that makes some hw quite unhappy.
v2: missing WARN_ON() hunk and comment
Reviewed-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The intention is that drivers can set crtc_state->mode_changed in their
atomic_check() fxns if they encounter a scenario that requires full
modeset.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch removes the dependency of amdkfd upon DRM_AMDGPU symbol in amdkfd's
Kconfig file.
This is done because amdgpu driver is not yet upstreamed and therefore,
DRM_AMDGPU symbol is not present in any Kconfig file.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Ville Syrjälä