mirror of https://gitee.com/openkylin/linux.git
10080 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Peter Ujfalusi
|
7a7faedde6 |
ARM: DTS: da850: Use the new DT bindings for the eDMA3
Switch to use the ti,edma3-tpcc and ti,edma3-tptc binding for the eDMA3. With the new bindings boards can customize and tweak the DMA channel priority to match their needs. With the new binding the memcpy is safe to be used since with the old binding it was not possible for a driver to know which channel is allowed to be used as non HW triggered channel. Using the new binding will allow us to reserve PaRAM slots to be used by the DSP which was not possible before and prevented the da850 boards to be moved to DT only. Note that the DMA memcpy is disabled, it can be enabled by reserving channels for memcpy by adding the following property to the edma node: ti,edma-memcpy-channels = <20 21>; /* Reserving channel 20 and 21 for memcpy */ Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Sushaanth Srirangapathi <sushaanth.s@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> |
|
|
Peter Ujfalusi
|
dfaebb509b |
ARM: DTS: da850: fix edma0 reg space
The size of the eDMA0 CC register space is 0x8000 and not 0x10000. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Sushaanth Srirangapathi <sushaanth.s@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> |
|
|
Linus Torvalds
|
c0d6fe2f01 |
ARM: DT updates for v4.4
As usual, this is the massive branch we have for each release. Lots of various updates and additions of hardware descriptions on existing hardware, as well as the usual additions of new boards and SoCs. This is also the first release where we've started mixing 64- and 32-bit DT updates in one branch. (Specific details on what's actually here and new is pretty easy to tell from the diffstat, so there's little point in duplicating listing it here.) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJWQT2WAAoJEIwa5zzehBx37tgQAIBe5eDJFXFihTlyOQ2plL3q vVH4OCzXIHELfM1J8CGZNah1wCQqNOts8RAmDCzxr+zSYuLOwJOEDZ6NKmErMxl0 NTj3+BsqKO3NRym970ofPqU9JRLQmpZ8K7dzk8Nwj2+r1WZHFu/j6Jv44n/Ns0lw 7+wxnG322lTm7SnvALCMD5lD4Y7VpThooWy5SdFtRoAetn+cLbVCJIeeQvO6Vxkp NooeJR0t2e8cpbAND5Jwu6eeWRcIbrvgjYDe0omhrIY05i9yNvIsC2HuQFGjF43z p2CnQvcKnhOXTZw3yse1Fx5igA7jqwVjjC/lVeDyxhusAtLpmuB6qbSaj7DpqkSQ nJxX1d49WKm68K+aknmee1kYRrvc4DE/kORI4IxXnsVNMu16ifTVLnxKgUhwzukb eZdTP6rsqgNozaYvh0k1vfSFd+CNSkBg+E9nrI3tU95yo3LOIhobVBCvBcWlmUvQ JdavRztqosChjIx3a9i1eCNKJtCg9p4m+gWjUqVVWsxBHe/3HojzjZnsBSynIQMA uGIVm0TKhNl1Svxl3oJo9257UCUK7+5PqJHK9IHrcWDULYx05JGSjuZcyvNS6Fo+ u1DMf0ud4gXJYhecFBa7b3zRjk5YxptgCCTjeEEOTUJbbhZqDjGFZlNuFi6dmqD3 ILJ2QMe/DGiPIlUmCfsx =qY1q -----END PGP SIGNATURE----- Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Olof Johansson: "As usual, this is the massive branch we have for each release. Lots of various updates and additions of hardware descriptions on existing hardware, as well as the usual additions of new boards and SoCs. This is also the first release where we've started mixing 64- and 32-bit DT updates in one branch. (Specific details on what's actually here and new is pretty easy to tell from the diffstat, so there's little point in duplicating listing it here)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (499 commits) ARM: dts: uniphier: add system-bus-controller nodes ARM64: juno: disable NOR flash node by default ARM: dts: uniphier: add outer cache controller nodes arm64: defconfig: Enable PCI generic host bridge by default arm64: Juno: Add support for the PCIe host bridge on Juno R1 Documentation: of: Document the bindings used by Juno R1 PCIe host bridge ARM: dts: uniphier: add I2C aliases for ProXstream2 boards dts/Makefile: Add build support for LS2080a QDS & RDB board DTS dts/ls2080a: Add DTS support for LS2080a QDS & RDB boards dts/ls2080a: Update Simulator DTS to add support of various peripherals dts/ls2080a: Remove text about writing to Free Software Foundation dts/ls2080a: Update DTSI to add support of various peripherals doc: DTS: Update DWC3 binding to provide reference to generic bindings doc/bindings: Update GPIO devicetree binding documentation for LS2080A Documentation/dts: Move FSL board-specific bindings out of /powerpc Documentation: DT: Add entry for FSL LS2080A QDS and RDB boards arm64: Rename FSL LS2085A SoC support code to LS2080A arm64: Use generic Layerscape SoC family naming ARM: dts: uniphier: add ProXstream2 Vodka board support ARM: dts: uniphier: add ProXstream2 Gentil board support ... |
|
|
Linus Torvalds
|
b44a3d2a85 |
ARM: SoC driver updates for v4.4
As we've enabled multiplatform kernels on ARM, and greatly done away with
the contents under arch/arm/mach-*, there's still need for SoC-related
drivers to go somewhere.
Many of them go in through other driver trees, but we still have
drivers/soc to hold some of the "doesn't fit anywhere" lowlevel code
that might be shared between ARM and ARM64 (or just in general makes
sense to not have under the architecture directory).
This branch contains mostly such code:
- Drivers for qualcomm SoCs for SMEM, SMD and SMD-RPM, used to communicate
with power management blocks on these SoCs for use by clock, regulator and
bus frequency drivers.
- Allwinner Reduced Serial Bus driver, again used to communicate with PMICs.
- Drivers for ARM's SCPI (System Control Processor). Not to be confused with
PSCI (Power State Coordination Interface). SCPI is used to communicate with
the assistant embedded cores doing power management, and we have yet to see
how many of them will implement this for their hardware vs abstracting in
other ways (or not at all like in the past).
- To make confusion between SCPI and PSCI more likely, this release also
includes an update of PSCI to interface version 1.0.
- Rockchip support for power domains.
- A driver to talk to the firmware on Raspberry Pi.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=dm+I
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"As we've enabled multiplatform kernels on ARM, and greatly done away
with the contents under arch/arm/mach-*, there's still need for
SoC-related drivers to go somewhere.
Many of them go in through other driver trees, but we still have
drivers/soc to hold some of the "doesn't fit anywhere" lowlevel code
that might be shared between ARM and ARM64 (or just in general makes
sense to not have under the architecture directory).
This branch contains mostly such code:
- Drivers for qualcomm SoCs for SMEM, SMD and SMD-RPM, used to
communicate with power management blocks on these SoCs for use by
clock, regulator and bus frequency drivers.
- Allwinner Reduced Serial Bus driver, again used to communicate with
PMICs.
- Drivers for ARM's SCPI (System Control Processor). Not to be
confused with PSCI (Power State Coordination Interface). SCPI is
used to communicate with the assistant embedded cores doing power
management, and we have yet to see how many of them will implement
this for their hardware vs abstracting in other ways (or not at all
like in the past).
- To make confusion between SCPI and PSCI more likely, this release
also includes an update of PSCI to interface version 1.0.
- Rockchip support for power domains.
- A driver to talk to the firmware on Raspberry Pi"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (57 commits)
soc: qcom: smd-rpm: Correct size of outgoing message
bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus
bus: sunxi-rsb: Add Allwinner Reduced Serial Bus (RSB) controller bindings
ARM: bcm2835: add mutual inclusion protection
drivers: psci: make PSCI 1.0 functions initialization version dependent
dt-bindings: Correct paths in Rockchip power domains binding document
soc: rockchip: power-domain: don't try to print the clock name in error case
soc: qcom/smem: add HWSPINLOCK dependency
clk: berlin: add cpuclk
ARM: berlin: dts: add CLKID_CPU for BG2Q
ARM: bcm2835: Add the Raspberry Pi firmware driver
soc: qcom: smem: Move RPM message ram out of smem DT node
soc: qcom: smd-rpm: Correct the active vs sleep state flagging
soc: qcom: smd: delete unneeded of_node_put
firmware: qcom-scm: build for correct architecture level
soc: qcom: smd: Correct SMEM items for upper channels
qcom-scm: add missing prototype for qcom_scm_is_available()
qcom-scm: fix endianess issue in __qcom_scm_is_call_available
soc: qcom: smd: Reject send of too big packets
soc: qcom: smd: Handle big endian CPUs
...
|
|
|
Linus Torvalds
|
a5e1d715a8 |
ARM: SoC cleanups for v4.4
Again we have a sizable (but not huge) cleanup branch with a net delta of about
-3k lines.
Main contents here is:
- A bunch of development/cleanup of a few PXA boards
- Removal of bockw platforms on shmobile, since the platform has now gone
completely multiplatform. Whee!
- move of the 32kHz timer on OMAP to a proper timesource
- Misc cleanup of older OMAP material (incl removal of one board file)
- Switch over to new common PWM lookup support for several platforms
There's also a handful of other cleanups across the tree, but the above are
the major pieces.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=uI7R
-----END PGP SIGNATURE-----
Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Olof Johansson:
"Again we have a sizable (but not huge) cleanup branch with a net delta
of about -3k lines.
Main contents here is:
- A bunch of development/cleanup of a few PXA boards
- Removal of bockw platforms on shmobile, since the platform has now
gone completely multiplatform. Whee!
- move of the 32kHz timer on OMAP to a proper timesource
- Misc cleanup of older OMAP material (incl removal of one board
file)
- Switch over to new common PWM lookup support for several platforms
There's also a handful of other cleanups across the tree, but the
above are the major pieces"
* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (103 commits)
ARM: OMAP3: hwmod data: Remove legacy mailbox data and addrs
ARM: DRA7: hwmod data: Remove spinlock hwmod addrs
ARM: OMAP4: hwmod data: Remove spinlock hwmod addrs
ARM: DRA7/AM335x/AM437x: hwmod: Remove gpmc address space from hwmod data
ARM: Remove __ref on hotplug cpu die path
ARM: Remove open-coded version of IRQCHIP_DECLARE
arm: omap2: board-generic: use omap4_local_timer_init for AM437x
ARM: DRA7/AM335x/AM437x: hwmod: Remove elm address space from hwmod data
ARM: OMAP: Remove duplicated operand in OR operation
clocksource: ti-32k: make it depend on GENERIC_CLOCKSOURCE
ARM: pxa: remove incorrect __init annotation on pxa27x_set_pwrmode
ARM: pxa: raumfeld: make some variables static
ARM: OMAP: Change all cpu_is_* occurences to soc_is_* for id.c
ARM: OMAP2+: Rename cpu_is macros to soc_is
arm: omap2: timer: limit hwmod usage to non-DT boots
arm: omap2+: select 32k clocksource driver
clocksource: add TI 32.768 Hz counter driver
arm: omap2: timer: rename omap_sync32k_timer_init()
arm: omap2: timer: always call clocksource_of_init() when DT
arm: omap2: timer: move realtime_counter_init() around
...
|
|
|
Olof Johansson
|
3e4dda70cc |
Merge branch 'next/arm64' into next/dt
Merging in the few patches I had kept separate from main next/dt, since others got merged here directly. * next/arm64: arm64: defconfig: Enable PCI generic host bridge by default arm64: Juno: Add support for the PCIe host bridge on Juno R1 Documentation: of: Document the bindings used by Juno R1 PCIe host bridge arm64: dts: mt8173: Add clocks for SCPSYS unit arm64: dts: mt8173: Add subsystem clock controller device nodes + Linux 4.3-rc5 |
|
|
Linus Torvalds
|
7c623cac49 |
power supply fixes for the v4.4 series
Just a single revert for a patch, that I should not have queued.
Detailed description is inside the patch. It's totally my fault,
that this happened, sorry about that :(
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=E1FO
-----END PGP SIGNATURE-----
Merge tag 'for-v4.4-important-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fix from Sebastian Reichel:
"Just a single revert for a patch, that I should not have queued.
Detailed description is inside the patch. It's totally my fault, that
this happened, sorry about that :("
* tag 'for-v4.4-important-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
Revert "ARM: dts: twl4030: Add iio properties for bci subnode"
|
|
|
Sebastian Reichel
|
829a7da03f |
Revert "ARM: dts: twl4030: Add iio properties for bci subnode"
This reverts commit
|
|
|
Linus Torvalds
|
9bbd4b9f38 |
DeviceTree updates for 4.4:
- DT binding doc consolidation moving similar bindings to common
locations. The majority of these are display related which were
scattered in video/, fb/, drm/, gpu/, and panel/ directories.
- Add new config option, CONFIG_OF_ALL_DTBS, to enable building all dtbs
in the tree for most arches with dts files (except powerpc for now).
- OF_IRQ=n fixes for user enabled CONFIG_OF.
- of_node_put ref counting fixes from Julia Lawall.
- Common DT binding for wakeup-source and deprecation of all similar
bindings.
- DT binding for PXA LCD controller.
- Allow ignoring failed PCI resource translations in order to ignore
64-bit addresses on non-LPAE 32-bit kernels.
- Support setting the NUMA node from DT instead of only from parent
device.
- Couple of earlycon DT parsing fixes for address and options.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tGCy
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree updates from Rob Herring:
"A fairly large (by DT standards) pull request this time with the
majority being some overdue moving DT binding docs around to
consolidate similar bindings.
- DT binding doc consolidation moving similar bindings to common
locations. The majority of these are display related which were
scattered in video/, fb/, drm/, gpu/, and panel/ directories.
- Add new config option, CONFIG_OF_ALL_DTBS, to enable building all
dtbs in the tree for most arches with dts files (except powerpc for
now).
- OF_IRQ=n fixes for user enabled CONFIG_OF.
- of_node_put ref counting fixes from Julia Lawall.
- Common DT binding for wakeup-source and deprecation of all similar
bindings.
- DT binding for PXA LCD controller.
- Allow ignoring failed PCI resource translations in order to ignore
64-bit addresses on non-LPAE 32-bit kernels.
- Support setting the NUMA node from DT instead of only from parent
device.
- Couple of earlycon DT parsing fixes for address and options"
* tag 'devicetree-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (45 commits)
MAINTAINERS: update DT binding doc locations
devicetree: add Sigma Designs vendor prefix
of: simplify arch_find_n_match_cpu_physical_id() function
Documentation: arm: Fixed typo in socfpga fpga mgr example
Documentation: devicetree: fix reference to legacy wakeup properties
Documentation: devicetree: standardize/consolidate on "wakeup-source" property
drivers: of: removing assignment of 0 to static variable
xtensa: enable building of all dtbs
mips: enable building of all dtbs
metag: enable building of all dtbs
metag: use common make variables for dtb builds
h8300: enable building of all dtbs
arm64: enable building of all dtbs
arm: enable building of all dtbs
arc: enable building of all dtbs
arc: use common make variables for dtb builds
of: add config option to enable building of all dtbs
of/fdt: fix error checking for earlycon address
of/overlay: add missing of_node_put
of/platform: add missing of_node_put
...
|
|
|
Linus Torvalds
|
3e069adabc |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
"Items of note:
- evdev users can now limit or mask the kind of events they will
receive. This will allow applications such as power manager or
network manager to only be woken when user presses special keys
such as KEY_POWER or KEY_WIFI and not be bothered with ordinary
key presses coming from keyboard
- support for FocalTech FT6236 touchscreen controller
- support for ROHM BU21023/24 touchscreen controller
- edt-ft5x06 touchscreen driver got a face lift and can now be used
with FT5506
- support for Google Fiber TV Box remote controls
- improvements in xpad driver (with more to come)
- several parport-based drivers have been switched to the new device
model
- other miscellaneous driver improvements"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (70 commits)
HID: hid-gfrm: avoid warning for input_configured API change
HID: hid-input: allow input_configured callback return errors
Input: evdev - fix bug in checking duplicate clock change request
Input: add userio module
Input: evdev - add event-mask API
Input: snvs_pwrkey - remove duplicated semicolon
HID: hid-gfrm: Google Fiber TV Box remote controls
Input: e3x0-button - update Kconfig description
Input: tegra-kbc - drop use of IRQF_NO_SUSPEND flag
Input: tegra-kbc - enable support for the standard "wakeup-source" property
Input: xen - check return value of xenbus_printf
Input: hp_sdc_rtc - fix y2038 problem in proc_show
Input: nomadik-ske-keypad - fix a trivial typo
Input: xpad - fix clash of presence handling with LED setting
Input: edt-ft5x06 - work around FT5506 firmware bug
Input: edt-ft5x06 - add support for FT5506
Input: edt-ft5x06 - add support for different max support points
Input: edt-ft5x06 - use max support points to determine how much to read
Input: rotary-encoder - add support for quarter-period mode
Input: rotary-encoder - use of_property_read_bool
...
|
|
|
Linus Torvalds
|
400c5bd5a5 |
power supply and reset changes for the v4.4 series
* new AXP20X USB Power driver * new Qualcomm SMBB driver * new TPS65217 Charger driver * BQ24257: add BQ24250/BQ24251 support * overhaul bq27x00 battery driver, rename to bq27xxx * misc. fixes and cleanups -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABCgAGBQJWOn8oAAoJENju1/PIO/qahrEP/RPHXvTxtYv8YvhaFbqcr07x 11gRB8RRthKK5woC3s70QKlMtcHijFeCwKuacut+7tfgK2oZDIm+Bd43Pl93aypU Yk4oTwop5OyrLsGIGiTIPPV9HTwr4q69Or2Q91mqUAUe2wGB5uCuJiJmCowUwfZs piv+ISLSOcH+i1bTx3hQ7h7axsdAlaSz2o1JprZaxm3rM67M8zF1ZHSK7wlpAeBa DiDrtUvEDCeLL8dmCA9xkFV4yFB9T+KNh0730N2RY+zlZS6WjSpzryqwsUWWyQ6h U9gFgcs+DjVaGHuMsIX2zm7xXfXHgUBtXdSQoCBhpSrZsdufMsT/8VQqVZ0yqpXL pQ2EXy63k6tXnXEyAKTA0tAOX/WZNfmmNblkea4JiyZULn7b/WH09waMZUBJqe84 Yn3SatVdGDN4nawsivzdiM3zR9/WTE9R3DmEeAE+g1RRsSraNwWlkzpDXcmnWmbc DoprnjLsDJfqL3/1ysF2V2I4B26Bws73qq6UUjJ4KEGWf8Y1fVawxrbcYmnrvg1K zW/saEgtl70FYqtee/0lIqTpjOZRX/O6QH5i8p7VC8cUzftX0Twc8MvfvpamDywX Cr1Y7pIMEhc6TFUP5lOzx9xJelA5PHJMpAT+02fh6YXMAzCcBUzL113rY5zBrVVl gce0iHDKAybmvww77z1r =0be4 -----END PGP SIGNATURE----- Merge tag 'for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: - new AXP20X USB Power driver - new Qualcomm SMBB driver - new TPS65217 Charger driver - BQ24257: add BQ24250/BQ24251 support - overhaul bq27x00 battery driver, rename to bq27xxx - misc fixes and cleanups * tag 'for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (54 commits) power: bq27xxx_battery: Remove unneeded dependency in Kconfig power: bq27xxx_battery: move irq handler to i2c section power: bq27xxx_battery: fix platform probe twl4030_charger: add missing iio dependency power_supply: charger-manager: add missing of_node_put Documentation: power: bq24257: Document exported sysfs entries power: bq24257: Add various device-specific sysfs properties power: bq24257: Allow input current limit sysfs access power: bq24257: Add input DPM voltage threshold setting support power: bq24257: Add over voltage protection setting support power: bq24257: Add SW-based approach for Power Good determination power: bq24257: Allow manual setting of input current limit power: bq24257: Add bit definition for temp sense enable power: bq24257: Add basic support for bq24250/bq24251 dt: power: bq24257-charger: Cover additional devices power: bq24257: Simplify bq24257_power_supply_init() power: bq24257: Use managed power supply register power: bq24257: Streamline input current limit setup power: bq24257: Remove IRQ config through stat-gpios power: bq27xxx_battery: fix signedness bug in bq27xxx_battery_read_health() ... |
|
|
Linus Torvalds
|
8e483ed134 |
char/misc drivers for 4.4-rc1
Here is the big char/misc driver update for 4.4-rc1. Lots of different driver and subsystem updates, hwtracing being the largest with the addition of some new platforms that are now supported. Full details in the shortlog. All of these have been in linux-next for a long time with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEABECAAYFAlY6d/oACgkQMUfUDdst+yl93ACcCf91y+ufwU3cmcnq5LpwHPfx VbkAn08Cn6Wu6IcihoEpR4hqGgIOtjqW =1a3d -----END PGP SIGNATURE----- Merge tag 'char-misc-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver update for 4.4-rc1. Lots of different driver and subsystem updates, hwtracing being the largest with the addition of some new platforms that are now supported. Full details in the shortlog. All of these have been in linux-next for a long time with no reported issues" * tag 'char-misc-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (181 commits) fpga: socfpga: Fix check of return value of devm_request_irq lkdtm: fix ACCESS_USERSPACE test mcb: Destroy IDA on module unload mcb: Do not return zero on error path in mcb_pci_probe() mei: bus: set the device name before running fixup mei: bus: use correct lock ordering mei: Fix debugfs filename in error output char: ipmi: ipmi_ssif: Replace timeval with timespec64 fpga: zynq-fpga: Fix issue with drvdata being overwritten. fpga manager: remove unnecessary null pointer checks fpga manager: ensure lifetime with of_fpga_mgr_get fpga: zynq-fpga: Change fw format to handle bin instead of bit. fpga: zynq-fpga: Fix unbalanced clock handling misc: sram: partition base address belongs to __iomem space coresight: etm3x: adding documentation for sysFS's cpu interface vme: 8-bit status/id takes 256 values, not 255 fpga manager: Adding FPGA Manager support for Xilinx Zynq 7000 ARM: zynq: dt: Updated devicetree for Zynq 7000 platform. ARM: dt: fpga: Added binding docs for Xilinx Zynq FPGA manager. ver_linux: proc/modules, limit text processing to 'sed' ... |
|
|
Linus Torvalds
|
b0f85fa11a |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
Changes of note:
1) Allow to schedule ICMP packets in IPVS, from Alex Gartrell.
2) Provide FIB table ID in ipv4 route dumps just as ipv6 does, from
David Ahern.
3) Allow the user to ask for the statistics to be filtered out of
ipv4/ipv6 address netlink dumps. From Sowmini Varadhan.
4) More work to pass the network namespace context around deep into
various packet path APIs, starting with the netfilter hooks. From
Eric W Biederman.
5) Add layer 2 TX/RX checksum offloading to qeth driver, from Thomas
Richter.
6) Use usec resolution for SYN/ACK RTTs in TCP, from Yuchung Cheng.
7) Support Very High Throughput in wireless MESH code, from Bob
Copeland.
8) Allow setting the ageing_time in switchdev/rocker. From Scott
Feldman.
9) Properly autoload L2TP type modules, from Stephen Hemminger.
10) Fix and enable offload features by default in 8139cp driver, from
David Woodhouse.
11) Support both ipv4 and ipv6 sockets in a single vxlan device, from
Jiri Benc.
12) Fix CWND limiting of thin streams in TCP, from Bendik Rønning
Opstad.
13) Fix IPSEC flowcache overflows on large systems, from Steffen
Klassert.
14) Convert bridging to track VLANs using rhashtable entries rather than
a bitmap. From Nikolay Aleksandrov.
15) Make TCP listener handling completely lockless, this is a major
accomplishment. Incoming request sockets now live in the
established hash table just like any other socket too.
From Eric Dumazet.
15) Provide more bridging attributes to netlink, from Nikolay
Aleksandrov.
16) Use hash based algorithm for ipv4 multipath routing, this was very
long overdue. From Peter Nørlund.
17) Several y2038 cures, mostly avoiding timespec. From Arnd Bergmann.
18) Allow non-root execution of EBPF programs, from Alexei Starovoitov.
19) Support SO_INCOMING_CPU as setsockopt, from Eric Dumazet. This
influences the port binding selection logic used by SO_REUSEPORT.
20) Add ipv6 support to VRF, from David Ahern.
21) Add support for Mellanox Spectrum switch ASIC, from Jiri Pirko.
22) Add rtl8xxxu Realtek wireless driver, from Jes Sorensen.
23) Implement RACK loss recovery in TCP, from Yuchung Cheng.
24) Support multipath routes in MPLS, from Roopa Prabhu.
25) Fix POLLOUT notification for listening sockets in AF_UNIX, from Eric
Dumazet.
26) Add new QED Qlogic river, from Yuval Mintz, Manish Chopra, and
Sudarsana Kalluru.
27) Don't fetch timestamps on AF_UNIX sockets, from Hannes Frederic
Sowa.
28) Support ipv6 geneve tunnels, from John W Linville.
29) Add flood control support to switchdev layer, from Ido Schimmel.
30) Fix CHECKSUM_PARTIAL handling of potentially fragmented frames, from
Hannes Frederic Sowa.
31) Support persistent maps and progs in bpf, from Daniel Borkmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1790 commits)
sh_eth: use DMA barriers
switchdev: respect SKIP_EOPNOTSUPP flag in case there is no recursion
net: sched: kill dead code in sch_choke.c
irda: Delete an unnecessary check before the function call "irlmp_unregister_service"
net: dsa: mv88e6xxx: include DSA ports in VLANs
net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports
net/core: fix for_each_netdev_feature
vlan: Invoke driver vlan hooks only if device is present
arcnet/com20020: add LEDS_CLASS dependency
bpf, verifier: annotate verbose printer with __printf
dp83640: Only wait for timestamps for packets with timestamping enabled.
ptp: Change ptp_class to a proper bitmask
dp83640: Prune rx timestamp list before reading from it
dp83640: Delay scheduled work.
dp83640: Include hash in timestamp/packet matching
ipv6: fix tunnel error handling
net/mlx5e: Fix LSO vlan insertion
net/mlx5e: Re-eanble client vlan TX acceleration
net/mlx5e: Return error in case mlx5e_set_features() fails
net/mlx5e: Don't allow more than max supported channels
...
|
|
|
Linus Torvalds
|
ccc9d4a6d6 |
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Add support for cipher output IVs in testmgr
- Add missing crypto_ahash_blocksize helper
- Mark authenc and des ciphers as not allowed under FIPS.
Algorithms:
- Add CRC support to 842 compression
- Add keywrap algorithm
- A number of changes to the akcipher interface:
+ Separate functions for setting public/private keys.
+ Use SG lists.
Drivers:
- Add Intel SHA Extension optimised SHA1 and SHA256
- Use dma_map_sg instead of custom functions in crypto drivers
- Add support for STM32 RNG
- Add support for ST RNG
- Add Device Tree support to exynos RNG driver
- Add support for mxs-dcp crypto device on MX6SL
- Add xts(aes) support to caam
- Add ctr(aes) and xts(aes) support to qat
- A large set of fixes from Russell King for the marvell/cesa driver"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (115 commits)
crypto: asymmetric_keys - Fix unaligned access in x509_get_sig_params()
crypto: akcipher - Don't #include crypto/public_key.h as the contents aren't used
hwrng: exynos - Add Device Tree support
hwrng: exynos - Fix missing configuration after suspend to RAM
hwrng: exynos - Add timeout for waiting on init done
dt-bindings: rng: Describe Exynos4 PRNG bindings
crypto: marvell/cesa - use __le32 for hardware descriptors
crypto: marvell/cesa - fix missing cpu_to_le32() in mv_cesa_dma_add_op()
crypto: marvell/cesa - use memcpy_fromio()/memcpy_toio()
crypto: marvell/cesa - use gfp_t for gfp flags
crypto: marvell/cesa - use dma_addr_t for cur_dma
crypto: marvell/cesa - use readl_relaxed()/writel_relaxed()
crypto: caam - fix indentation of close braces
crypto: caam - only export the state we really need to export
crypto: caam - fix non-block aligned hash calculation
crypto: caam - avoid needlessly saving and restoring caam_hash_ctx
crypto: caam - print errno code when hash registration fails
crypto: marvell/cesa - fix memory leak
crypto: marvell/cesa - fix first-fragment handling in mv_cesa_ahash_dma_last_req()
crypto: marvell/cesa - rearrange handling for sw padded hashes
...
|
|
|
Linus Torvalds
|
e8a2a176dd |
- Move the out-of-LED-tree led-sead3 driver to the LED subsystem.
- Add 'invert' sysfs attribute to the heartbeat trigger.
- Add Device Tree support to the leds-netxbig driver and add
related DT nodes to the kirkwood-netxbig.dtsi and kirkwood-net5big.dts
files. Remove static LED setup from the related board files.
- Remove redundant brightness conversion operation from leds-netxbig.
- Improve leds-bcm6328 driver: improve default-state handling, add more
init configuration options, print invalid LED instead of warning only
about maximum LED value.
- Add a shutdown function for setting gpio-leds into off state
when shutting down.
- Fix DT flash timeout property naming in leds-aat1290.txt.
- Switch to using devm prefixed version of led_classdev_register()
(leds-cobalt-qube, leds-hp6xx, leds-ot200, leds-ipaq-micro,
leds-netxbig, leds-locomo, leds-menf21bmc, leds-net48xx,
leds-wrap).
- Add missing of_node_put (leds-powernv, leds-bcm6358, leds-bcm6328,
leds-88pm860x).
- Coding style fixes and cleanups: led-class/led-core, leds-ipaq-micro.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.17 (GNU/Linux)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=X8+e
-----END PGP SIGNATURE-----
Merge tag 'leds_for_4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski:
- Move the out-of-LED-tree led-sead3 driver to the LED subsystem.
- Add 'invert' sysfs attribute to the heartbeat trigger.
- Add Device Tree support to the leds-netxbig driver and add related DT
nodes to the kirkwood-netxbig.dtsi and kirkwood-net5big.dts files.
Remove static LED setup from the related board files.
- Remove redundant brightness conversion operation from leds-netxbig.
- Improve leds-bcm6328 driver: improve default-state handling, add more
init configuration options, print invalid LED instead of warning only
about maximum LED value.
- Add a shutdown function for setting gpio-leds into off state when
shutting down.
- Fix DT flash timeout property naming in leds-aat1290.txt.
- Switch to using devm prefixed version of led_classdev_register()
(leds-cobalt-qube, leds-hp6xx, leds-ot200, leds-ipaq-micro,
leds-netxbig, leds-locomo, leds-menf21bmc, leds-net48xx, leds-wrap).
- Add missing of_node_put (leds-powernv, leds-bcm6358, leds-bcm6328,
leds-88pm860x).
- Coding style fixes and cleanups: led-class/led-core, leds-ipaq-micro.
* tag 'leds_for_4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (27 commits)
leds: 88pm860x: add missing of_node_put
leds: bcm6328: add missing of_node_put
leds: bcm6358: add missing of_node_put
powerpc/powernv: add missing of_node_put
leds: leds-wrap.c: Use devm_led_classdev_register
leds: aat1290: Fix property naming of flash-timeout-us
leds: leds-net48xx: Use devm_led_classdev_register
leds: leds-menf21bmc.c: Use devm_led_class_register
leds: leds-locomo.c: Use devm_led_classdev_register
leds: leds-gpio: add shutdown function
Documentation: leds: update DT bindings for leds-bcm6328
leds-bcm6328: add more init configuration options
leds-bcm6328: simplify and improve default-state handling
leds-bcm6328: print invalid LED
leds: netxbig: set led_classdev max_brightness
leds: netxbig: convert to use the devm_ functions
ARM: mvebu: remove static LED setup for netxbig boards
ARM: Kirkwood: add LED DT entries for netxbig boards
leds: netxbig: add device tree binding
leds: triggers: add invert to heartbeat
...
|
|
|
Simon Guinot
|
767361fac0 |
ARM: Kirkwood: add LED DT entries for netxbig boards
This patch adds DT entries for the LEDs found on the Kirkwood-based LaCie boards 2Big and 5Big Network v2. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> |
|
|
Linus Torvalds
|
bc9d8c20ff |
This is the big bulk of pin control changes for the
v4.4 kernel development cycle:
Infrastructure:
- Doug Anderson wrote a patch adding an "init" state
different from the "default" state for pin control
state handling in the core framework. This is applied
before the driver's probe() call if defined and takes
precedence over "default". If both are defined, "init"
will be applied *before* probe() and "default" will be
applied *after* probe().
Significant subdriver improvements:
- SH PFC is switched to getting GPIO ranges from the
device tree ranges property on DT platforms.
- Got rid of CONFIG_ARCH_SHMOBILE_LEGACY, we are all
modernized.
- Got rid of SH PFC hardcoded IRQ numbers.
- Allwinner sunxi external interrupt through the "r"
controller.
- Moved the Cygnus driver to use DT-provided GPIO
ranges.
New drivers:
- Atmel PIO4 pin controller for the SAMA4D2 family
New subdrivers:
- Rockchip RK3036 subdriver
- Renesas SH PFC R8A7795 subdriver
- Allwinner sunxi A83T PIO subdriver
- Freescale i.MX7d iomux lpsr subdriver
- Marvell Berlin BG4CT subdriver
- SiRF Atlas 7 step B SoC subdriver
- Intel Broxton SoC subdriver
Apart from this, the usual slew if syntactic and semantic
fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=0t3B
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the big bulk of pin control changes for the v4.4 kernel
development cycle. Development pace is high in pin control again this
merge window. 28 contributors, 83 patches.
It hits a few sites outside the pin control subsystem:
- Device tree bindings in Documentation (as usual)
- MAINTAINERS
- drivers/base/* for the "init" state handling by Doug Anderson.
This has been ACKed by Greg.
- drivers/usb/renesas_usbhs/rcar2.c, for a dependent Renesas change
in the USB subsystem. This has been ACKed by both Greg and Felipe.
- arch/arm/boot/dts/sama5d2.dtsi - this should ideally have gone
through the ARM SoC tree but ended up here.
This time I am using Geert Uytterhoeven as submaintainer for SH PFC
since the are three-four people working in parallel with new Renesas
ASICs.
Summary of changes:
Infrastructure:
- Doug Anderson wrote a patch adding an "init" state different from
the "default" state for pin control state handling in the core
framework. This is applied before the driver's probe() call if
defined and takes precedence over "default". If both are defined,
"init" will be applied *before* probe() and "default" will be
applied *after* probe().
Significant subdriver improvements:
- SH PFC is switched to getting GPIO ranges from the device tree
ranges property on DT platforms.
- Got rid of CONFIG_ARCH_SHMOBILE_LEGACY, we are all modernized.
- Got rid of SH PFC hardcoded IRQ numbers.
- Allwinner sunxi external interrupt through the "r" controller.
- Moved the Cygnus driver to use DT-provided GPIO ranges.
New drivers:
- Atmel PIO4 pin controller for the SAMA4D2 family
New subdrivers:
- Rockchip RK3036 subdriver
- Renesas SH PFC R8A7795 subdriver
- Allwinner sunxi A83T PIO subdriver
- Freescale i.MX7d iomux lpsr subdriver
- Marvell Berlin BG4CT subdriver
- SiRF Atlas 7 step B SoC subdriver
- Intel Broxton SoC subdriver
Apart from this, the usual slew if syntactic and semantic fixes"
* tag 'pinctrl-v4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (81 commits)
pinctrl: pinconf: remove needless loop
pinctrl: uniphier: guard uniphier directory with CONFIG_PINCTRL_UNIPHIER
pinctrl: zynq: fix UTF-8 errors
pinctrl: zynq: Initialize early
pinctrl: at91: add missing of_node_put
pinctrl: tegra-xusb: Correct lane mux options
pinctrl: intel: Add Intel Broxton pin controller support
pinctrl: intel: Allow requesting pins which are in ACPI mode as GPIOs
pinctrl: intel: Add support for multiple GPIO chips sharing the interrupt
drivers/pinctrl: Add the concept of an "init" state
pinctrl: uniphier: set input-enable before pin-muxing
pinctrl: cygnus: Add new compatible string for gpio controller driver
pinctrl: cygnus: Remove GPIO to Pinctrl pin mapping from driver
pinctrl: cygnus: Optional DT property to support pin mappings
pinctrl: sunxi: Add irq pinmuxing to sun6i "r" pincontroller
pinctrl: sunxi: Fix irq_of_xlate for the r_pio pinctrl block
pinctrl: sh-pfc: Remove obsolete r8a7778 platform_device_id entry
pinctrl: sh-pfc: Remove obsolete r8a7779 platform_device_id entry
pinctrl: sh-pfc: Stop including <linux/platform_data/gpio-rcar.h>
usb: renesas_usbhs: Remove unneeded #include <linux/platform_data/gpio-rcar.h>
...
|
|
|
Linus Torvalds
|
17a1359034 |
MMC core:
- Add new API to set VCCQ voltage - mmc_regulator_set_vqmmc() - Add new ioctl to allow userspace to send multi commands - Wait for card busy signalling before starting SDIO requests - Remove MMC_CLKGATE - Enable tuning for DDR50 mode - Some code clean-up/improvements to mmc pwrseq - Use highest priority for eMMC restart handler - Add DT bindings for eMMC hardware reset support - Extend the mmc_send_tuning() API - Improve ios show for debugfs - A couple of code optimizations MMC host: - Some generic OF improvements - Various code clean-ups - sirf: Add support for DDR50 - sunxi: Add support for card busy detection - mediatek: Use MMC_CAP_RUNTIME_RESUME - mediatek: Add support for eMMC HW-reset - mediatek: Add support for HS400 - dw_mmc: Convert to use the new mmc_regulator_set_vqmmc() API - dw_mmc: Add external DMA interface support - dw_mmc: Some various improvements - dw_mmc-rockchip: MMC tuning with the clock phase framework - sdhci: Properly clear IRQs during resume - sdhci: Enable tuning for DDR50 mode - sdhci-of-esdhc: Use IRQ mode for card detection - sdhci-of-esdhc: Support both BE and LE host controller - sdhci-pci: Build o2micro support in the same module - sdhci-pci: Support for new Intel host controllers - sdhci-acpi: Support for new Intel host controllers -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJWNyuHAAoJEP4mhCVzWIwpHHUP/38kYyuhHNWEagna2taCnb5r tacx0IEfjvEmkzFNX4qLyBlu8lvDMJPx/GYx1RxE10/ZEsdllBpgtuS2+4SLHdlR naUwPsjjMigf4FavsnMxYe9yqsHsDkzFgJ2zsrRm/5h+0G4Uj3X+ejgGPjAFu3KK 6Ldha83dagR065MT8AIQRkVfjwME2mQC4RbWxmIpEQrzS2mJi3QZ0UikVWs6TWuE +1pxCobspYXK4Q9UC455JvrMJtOjDi1JNBmVyTA2fS+SBeQ1ZqbnNSbK1VAXI43b TKgUN/wp2SGqNCL+dhsebTOdEwKUgxcRRCReZRR0DBvTDvETmXRZ6ji6XUtaSAHL TY4hbNL9bWJN0JoidgdUKcQ5GjZcvDQk3eY6L0FP/C/plDEBIel7Ndf8pQco9NBQ l1CXuhjNZvkmHf9w44FgdeEGM5l/hn8J725mrVU+XNrMKv1RuNQZ56h2i33ktk6c b3+uGLMAqat59yecyaFqZibI+9WQ0pS+zz0IgQxyWxU5i86z3hrk4fbxHpmFZuEz 7awBMjiXldrbUY0fvWK6KlnTz+kqHHKxD5o9Pr9xBo6H28AwL4zGFwcU8dDpaOSk o13lLvWcZYsSMuUwO+y5jQdGejTkD2ZeJY8LqAY+SB124qAngRXLwdyBp5uqnzLS mBJh2R2ztcin5TzaJN3c =gn/m -----END PGP SIGNATURE----- Merge tag 'mmc-v4.4' of git://git.linaro.org/people/ulf.hansson/mmc Pull MMC updates from Ulf Hansson: "MMC core: - Add new API to set VCCQ voltage - mmc_regulator_set_vqmmc() - Add new ioctl to allow userspace to send multi commands - Wait for card busy signalling before starting SDIO requests - Remove MMC_CLKGATE - Enable tuning for DDR50 mode - Some code clean-up/improvements to mmc pwrseq - Use highest priority for eMMC restart handler - Add DT bindings for eMMC hardware reset support - Extend the mmc_send_tuning() API - Improve ios show for debugfs - A couple of code optimizations MMC host: - Some generic OF improvements - Various code clean-ups - sirf: Add support for DDR50 - sunxi: Add support for card busy detection - mediatek: Use MMC_CAP_RUNTIME_RESUME - mediatek: Add support for eMMC HW-reset - mediatek: Add support for HS400 - dw_mmc: Convert to use the new mmc_regulator_set_vqmmc() API - dw_mmc: Add external DMA interface support - dw_mmc: Some various improvements - dw_mmc-rockchip: MMC tuning with the clock phase framework - sdhci: Properly clear IRQs during resume - sdhci: Enable tuning for DDR50 mode - sdhci-of-esdhc: Use IRQ mode for card detection - sdhci-of-esdhc: Support both BE and LE host controller - sdhci-pci: Build o2micro support in the same module - sdhci-pci: Support for new Intel host controllers - sdhci-acpi: Support for new Intel host controllers" * tag 'mmc-v4.4' of git://git.linaro.org/people/ulf.hansson/mmc: (73 commits) mmc: dw_mmc: fix the wrong setting for UHS-DDR50 mode mmc: dw_mmc: fix the CardThreshold boundary at CardThrCtl register mmc: dw_mmc: NULL dereference in error message mmc: pwrseq: Use highest priority for eMMC restart handler mmc: mediatek: add HS400 support mmc: mmc: extend the mmc_send_tuning() mmc: mediatek: add implement of ops->hw_reset() mmc: mediatek: fix got GPD checksum error interrupt when data transfer mmc: mediatek: change the argument "ddr" to "timing" mmc: mediatek: make cmd_ints_mask to const mmc: dt-bindings: update Mediatek MMC bindings mmc: core: Add DT bindings for eMMC hardware reset support mmc: omap_hsmmc: Enable omap_hsmmc for Keystone 2 mmc: sdhci-acpi: Add more ACPI HIDs for Intel controllers mmc: sdhci-pci: Add more PCI IDs for Intel controllers arm: lpc18xx_defconfig: remove CONFIG_MMC_DW_IDMAC arm: hisi_defconfig: remove CONFIG_MMC_DW_IDMAC arm: exynos_defconfig: remove CONFIG_MMC_DW_IDMAC arc: axs10x_defconfig: remove CONFIG_MMC_DW_IDMAC mips: pistachio_defconfig: remove CONFIG_MMC_DW_IDMAC ... |
|
|
David S. Miller
|
b75ec3af27 | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net | |
|
Masahiro Yamada
|
1b38b0e334 |
ARM: dts: uniphier: add system-bus-controller nodes
The System Bus Controller block has two register regions, but having only the second one in a separate node was not nice. Replace it with a new node with two register regions in it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Rob Herring
|
efd8c4ff73 |
arm: enable building of all dtbs
Enable building all dtb files when CONFIG_OF_ALL_DTBS is enabled. The dtbs are not really dependent on a platform being enabled or any other kernel config, so for testing coverage it is convenient to build all of the dtbs. This builds all dts files in the tree, not just targets listed. This is simpler for arm64 which has a bunch of sub-dirs. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> |
|
|
Masahiro Yamada
|
7c62f299ba |
ARM: dts: uniphier: add outer cache controller nodes
Add L2 cache controller nodes for all the UniPhier SoC DTSI. Also, add an L3 cache controller node for PH1-Pro5 DTSI. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Heiko Stuebner
|
c41d31f71d |
ARM: dts: rockchip: add tuning related settings to veyron devices
This allows the tuning code to run and use higher speeds on capable cards. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> |
|
|
Alexandru M Stan
|
f71ddc5873 |
ARM: dts: rockchip: Add drive/sample clocks for rk3288 dw_mmc devices
The drive/sample clocks can be phase shifted. The drive clock could be used in a future patch to adjust hold times. The sample clock is used for tuning. Signed-off-by: Alexandru M Stan <amstan@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> |
|
|
Olof Johansson
|
3d2ef3b396 |
Allwinner DT changes for 4.4, round 3
A bunch of new boards, but mostly enable the support for the Audio Codec on the older SoCs (A10, A10s, A13, A20, R8) and enable it on various boards. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJWKnQ1AAoJEBx+YmzsjxAgkSsQAJlnSjbaMRDoOgQdn32Sw98T CoZHJAtzwH8Wz9ydzLqpr987QceCrqr/dWh92KUuIfLhUy+etFL61Ht4/BbBSnCd RMxYVWCCbmtdRVyZRarE4wLMM/gGh/mK8dNxnm16O3Oy9y4HUcnYCVihJZPjL8aQ Ix5Dh2tPZiNsGNxsd3dcPFVqcd67Td9PpJfiFxZSVErxSeT/Idt6+ZsdTks9OLWx mY9wCIv3T0/1nlt9d6OCiAD3+ZgmxIZjxGiua4wsoqh/LbtFW1Md03Mes1k/i9g2 TmsqphaTF29tWP0QXSV1EM8CjuLlJrvZa0SCIXFDM9dXZJ7UQ8ONg0MnFTLSrTWq SrON05TCVWOagYvbKc2GZJUrjDeKf9oXsno5b+6TvUarB07Z06ZYAapnaHqB7abi FD85ZogjAiJ5zGHkU4Eejw36Neqwga0HTwTcUOnwK1RmAPmJ40BOQjdU6S4L4aV2 +6qxOk7g3sMCFcz/V3OtEXMtO0M2E0gxSqGT+ctX9KDkTI9hoWBnQgI5RSiINhcu 46osc6GkTCixuq9iLLR40eRf0qLQbrtTjtrtaQF29A6l+LZSUA2V9qebWda/cHYd bDaq8g2CeljdZcwClloXMNMCsB37F/LLUGoz/+OlGB2mYEHoOrCqHWrdN6+pEnTa B4mvMNsrf8/U1qy3uGbh =3gHY -----END PGP SIGNATURE----- Merge tag 'sunxi-dt-for-4.4-3' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt Allwinner DT changes for 4.4, round 3 A bunch of new boards, but mostly enable the support for the Audio Codec on the older SoCs (A10, A10s, A13, A20, R8) and enable it on various boards. * tag 'sunxi-dt-for-4.4-3' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: dts: sun6i: Add dts file for MSI Primo81 tablet ARM: dts: sun6i: Add simplefb node labels to reference at board level ARM: dts: sun4i: Enable audio codec on Marsboard A10. ARM: dts: sun4i: Add dts file for the pov protab2-ips9 tablet ARM: sun4i: Enable cubieboard audio codec ARM: sun5i: chip: Enable the audio codec ARM: sun4i: Enable audio-codec on Mele A1000 ARM: sun7i: Enable cubieboard2 audio codec ARM: sun7i: dt: enable audio codec on Cubietruck ARM: sun7i: Add sunxi codec device node ARM: sun5i: Add the Audio codec DT node ARM: sun4i: Add sunxi codec device node ARM: sun7i: Add audio codec clock ARM: sun5i: Add audio codec clock ARM: sun4i: Add audio codec clock ARM: sun7i: Add audio PLL ARM: sun5i: Add audio PLL ARM: sun4i: Add audio PLL ARM: dts: sun7i: Enable USB DRC on pcDuino v3 Nano ARM: dts: sun6i: Add support for Sinlinx A31s SDK board Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Olof Johansson
|
64ebda3acd |
Merge tag 'arm/soc/for-4.4/rpi-dt-v2' of https://github.com/Broadcom/stblinux into next/dt
This pull request contains the DT changes for BCM2835 in 4.4. It pulls in clk/clk-bcm2835 (which Stephen Boyd has said would be stable) because the DT changes to enable the clock driver need the driver itself to be present. These changes include the following: - Eric Anholt, moves the bcm2835 clock driver under bcm/ where it belongs with other Broadcom clock providers drivers, defines the binding for new clock driver, adds support for programming the BCM2835 audio domain, adds the DDC I2C controller to Device Tree, and finally migrates the Device Tree to use the new clock driver binding - Lubomir Rintel adds support for the Raspberry Pi Model A+ and B revision 2, and remove the I2S controller which is non-existent on Raspberry Pi Model B - Stefan Wahren adds an uart0 label for referencing the UART adapter * tag 'arm/soc/for-4.4/rpi-dt-v2' of https://github.com/Broadcom/stblinux: ARM: bcm2835: Add the DDC I2C controller to the device tree. ARM: bcm2835: Switch to using the new clock driver support. ARM: bcm2835: dt: Add Raspberry Pi Model A+ ARM: bcm2835: dt: Add Raspberry Pi Model B rev2 ARM: bcm2835: dt: Raspberry Pi Model B had no I2S ARM: bcm2835: add label for uart0 clk: bcm2835: Add support for programming the audio domain clocks clk: bcm2835: Add binding docs for the new platform clock driver. clk: bcm2835: Move under bcm/ with other Broadcom SoC clk drivers. Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Masahiro Yamada
|
5f76048695 |
ARM: dts: uniphier: add I2C aliases for ProXstream2 boards
Add aliases to fix the I2C indexes like the other UniPhier boards. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Olof Johansson
|
99b6eb55ce |
Samsung 2nd DT updates for v4.4
- use exynos5420-dw-mshc instead of exynos5250 for exynos3250 - add DISP1 clocks and the DISP1 power domain of two closk on exynos5250 (clock commit got Stephen's ack) - add vbus regulators on exynos3250, exynos4210 and exynos4412 boards - fix typo in regulator enable GPIO property on s5pv20-aquila and goni - document: correct the example of exynos power domain clocks - document: consolidate exynos SoC dt-bindings and non-Samsung boards related compatibles (FriendlyARM, Google, Hardkernel and Insignal) - update MAINTAINER entries accordingly (documentation) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJWKp8kAAoJEA0Cl+kVi2xq5fUP/Rf+zO2xnnM+nW31k/6GCQQu 4BgjBfiK6/coAfQ+mq1PNs3aOFDUmO1g3vwoly64vJbhylCd6jFEzPlbgb109ZnI A7JrqoiZ0LE+i/RXjfgxJm/0v1gn7TOOBKkwWlIEJpgV7i8wWjdCnMxlNw+amSGF H0pJ14TCN7OfsPZtX1S7dgz/dLSeQzCzMn8cJk4ccPcsN+1LqI4whFQ31ykOYCaT 5b3/EvORjqkn0gdEiQ/i2WtaM1yKgfNUYXaJP69j605ipzKaUCMt9WnBY9EB6RaJ im36eKNQXW73dYGEuuf1I5L58Hb+poAmlz4TtI4re/ykQ1mrvOj1xYwgfD9Sjw+z ZS4Io5WMZgdJrmMXFPxnd7BQHu4IbnEfU+408cgOVP/fPrAHxYtO8tVr7/n2lgJ3 3Hio2MBzAWAXMz45IfhCz2n/ITKBCkfjHFOkno7Rmmm/83cORM6ZleldMqtrj5sQ oqGDcBwI0ijKptZIfaLFQfndMmzUd4t5i+UQTjyIDE1nBmvPyqHgPyetHQttQQM+ bWTCJU+SlKze7CIwogmrrFEfw2RhNU+FS/T9D7t5JCWLb4B5CgLnHt7NWth2cQUQ NuiTIgoU+znke+t2A1PxE85CmBr5yuezqxq8bJv8qnGHrF/ougPaNCOdXPef0ci4 bfK3nV/axFga/7ag900e =UPmG -----END PGP SIGNATURE----- Merge tag 'samsung-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt Samsung 2nd DT updates for v4.4 - use exynos5420-dw-mshc instead of exynos5250 for exynos3250 - add DISP1 clocks and the DISP1 power domain of two closk on exynos5250 (clock commit got Stephen's ack) - add vbus regulators on exynos3250, exynos4210 and exynos4412 boards - fix typo in regulator enable GPIO property on s5pv20-aquila and goni - document: correct the example of exynos power domain clocks - document: consolidate exynos SoC dt-bindings and non-Samsung boards related compatibles (FriendlyARM, Google, Hardkernel and Insignal) - update MAINTAINER entries accordingly (documentation) * tag 'samsung-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: MAINTAINERS: Add documentation and dt-bindings for exynos stuff dt-bindings: EXYNOS: Document compatibles from other vendors dt-bindings: Consolidate Exynos SoC bindings ARM: dts: Add clocks to DISP1 domain in exynos5250 dt-bindings: Correct the example for Exynos power domain clocks ARM: dts: Fix typo in regulator enable GPIO property in s5pv210-goni ARM: dts: Fix typo in regulator enable GPIO property in s5pv210-aquila ARM: dts: Add vbus regulator to USB2 phy nodes on exynos3250, exynos4210 and exynos4412 boards clk: samsung: exynos5250: Add DISP1 clocks ARM: dts: use exynos5420-dw-mshc compatible for exynos3250 Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Olof Johansson
|
3eb52a06d5 |
ARM: tegra: Devicetree changes for v4.4-rc1
Mostly a bunch of updates to the Toradex Apalis and Colibri platforms along with a couple of cleanup patches. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJWJjUyAAoJEN0jrNd/PrOhSTUP/30KgnjyQI5SvMoj5brg5nHW NPAHVYoi8PtjFhf5vMUllgfTbU/nh+Q+AdXT2Hg6Fo9xRcNNquGGj+Ek2pLUg4Gn 4L14EMDzJX9IR6uxEKSsRdG6W7Gw4hGWtyGVJATXxzA9OF0Ovte09cBZ9wYqhLU5 y+cio34Jd3C/l91b+ywvrUhaCutAvtlAS+z0zZXEazA/Znjo1iKC0fIOARYOOBpi YuGaJ/Zo9AlFnkriD/Bkx6rHPjO8qL56mCVpGcOfalGMq4BIBF1y68R8oJ+zGPHz Cn5Gw1kAy5SAUM33yFbyl/pZbrKtWvn+omYQCJmYjRocW8brOr+k+LVXdB/PFCLG DI6Lgq/QuIkIwyrISmVD1lRDtDK2vObcsAD3J1No3GvmYtMIqMG2hIjsU7ZzMw0b 5OtMrpcbgBtk91d+KsFdZv0ARAeg3dpHSvd1655kexBTZoMLgODOHP/pOHdltHTz zYK+Hc7XulaRxRiXCJGKYwGcCPL9iLMQdiN4dTCnMVSCysSgzX7KtXSlrTH4MPXr ZWZfqw/P4OiUFuwyPPaMq+l/Nr1AK18UJb4E1ZkmnLZ9ruObKHtV3/Y6Kf0ApgLW XQLQG/nY3QpIZVP9qKG6Tc+RV/aH3cTXD2Vb2ZG4EC6OVONr4USLERRVkDVXTd5h VaDZKW1rpb+WCxL5o3Uh =1DQA -----END PGP SIGNATURE----- Merge tag 'tegra-for-4.4-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt ARM: tegra: Devicetree changes for v4.4-rc1 Mostly a bunch of updates to the Toradex Apalis and Colibri platforms along with a couple of cleanup patches. * tag 'tegra-for-4.4-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (25 commits) ARM: tegra: Use consistent indentation for SATA node ARM: tegra: colibri-eval: Fix power/wakeup key ARM: tegra: colibri-eval: Add comment concerning SD/MMC ARM: tegra: colibri-eval: Fix vendor string of M41T0M6 RTC ARM: tegra: colibri: Properly align pin names ARM: tegra: colibri: Replace eMMC label by comment ARM: tegra: colibri: Activate STMPE811 touch controller ARM: tegra: colibri: Add touch pen interrupt pin muxing ARM: tegra: colibri: Fix comment about 3v3 fixed supply ARM: tegra: colibri: Add pin muxing for on-module power I2C ARM: tegra: colibri: Improve comment about thermal alert pin ARM: tegra: colibri: Fix HDMI supplies ARM: tegra: colibri: Update hardware revisions compatibility ARM: tegra: apalis-eval: Fix power/wakeup key ARM: tegra: apalis-eval: Fix backlight PWM comment ARM: tegra: apalis-eval: Set OTG dr_mode ARM: tegra: apalis-eval: Enable HDA controller ARM: tegra: apalis: Properly align pin names ARM: tegra: apalis: Add digital audio pin muxing ARM: tegra: apalis: Add comment concerning eMMC ... Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Arnd Bergmann
|
920c74f0df |
Second batch of DT changes for 4.4:
- some DT fixes: pullups, disabled property - the PMC is now a syscon - great improvement of sama5d2 support -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABCAAGBQJWJ/W8AAoJEKbNnwlvZCyzyuMQAMgLV1qsqRFBCHNBkaA4IJ4Y QdMuJeUaqrlgZNrBC7GoD50vLYRHgESlFm1/oE1xomyXNh/dBcG9mHnQBP3qsBJ/ 6EBpR2b8JzUzcF5Iyr9gwzn/3weIfC8CzhHZoPMiaFydX6tolfHiJFhnRIHoJxHQ UFG2IZHh5lMPJNhhHzFfy5MH5H7u+OVnLnRUh+O61tWksAc7FyxX4KUaRlfGQjdO MM3cly+CQ+PN7KWIEnZJYNSXdZo5e/YkU95ARO5VL6HO6sSWu6rIrVm+84aNKgpd WvbJMHe0mZKF1sGE4lcB2bXp0Xp+b5pkgYiKzWYAA50DeGrDSjcEZoMjwBgJDqKV s5vkDPUr05RekaDws1xRgScnx6rLLc//51XrFw+IvDRZ16LNZ+eJBwbz331sgn/W LVs99U2kNn1bCm6++c+yAPKJy1lfsT9umWJIgJRyK1fy9jizl38GScQJI/p5lUsb FR6SzOxY3N4gxr98zfGje6URZJEGhdixBtVs1U99nDJex+LbMbVLIuDrDHn4i47G kJODYjDaUgYPKh4qm6K3MsiZUc0u9aEIiEbqdwkzOPxuq9e5p//XY3ILmulTfUdw B2r9t3uhnUBbeTabY7ig1GIMI8YXC9h3MzY18K2BxjW35V46njJgqzngGoOYGIY8 ocCT5WZNC9n6dYKyUXmc =KaMl -----END PGP SIGNATURE----- Merge tag 'at91-ab-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt Merge "Second batch of DT changes for 4.4" from Alexandre Belloni: - some DT fixes: pullups, disabled property - the PMC is now a syscon - great improvement of sama5d2 support * tag 'at91-ab-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: at91/dt: sama5d2: add missing devices ARM: at91/dt: sama5d4: add the macb1 node ARM: at91/dt: add pullup on mmc2 data signals ARM: at91/dt: sama5d2_xplained: add regulator nodes ARM: at91/dt: fix "disabled" property on at91rm9200 ARM: at91/dt: use syscon for PMC |
|
|
Arnd Bergmann
|
8d1a327c7b |
Few more omap dts changes for v4.4 merge window, mostly to fix and clean
up some omap5 issues to allow adding other omap5 boards. Also some other fixes and clean-up: - Fix SDIO WLAN for omap5 that's been broken for a while. As further patches are still needed for wl18xx, no need for stable on this one. - Move most of omap5 support into omap5-board-common.dtsi as most omap5 boards seem to share the same basic set of devices. - Add minimal IGEPv5 support using based on omap5-board-common.dtsi - Remove now unneedes gpio hogging for dra72-evm - Update Javier Martinez Canillas email address - Change earlier IGEP boards to use IOPAD pinmux macros -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJWJnbkAAoJEBvUPslcq6VzfYEP/0AuSHyu0hYSDjWZ9Rtjgomq ntoY6nSKktkzrTiZYaZB1k1dVniv3s4ipHUjOFvSIDTww/bzl8p2Sinougvz4WOO tYBIweZ8ZFrEXLhX0l4tkfKbL/h5N0AK2lClILPkhMIbsD25exViRQ4GSjFFofR9 ND9rCS0FsX8aOKMziQI0QTD51Ew82qXjVZBkOC+QakWheERDidrQ3CZ8R0zwenuq UUCmPDQ/lPiK91YOamYoXbkajWHU28PKiVNFSe8Vsb5PuGXypZCEByOxTX5jCuun UnKi4o+d5F+1chO/lKwfPpD1yHc4bG0DTPsUs15hxXnirT05wUX8KyzdfJpLeK9M 9K9bue/S7vT2aWQmD4uE1ta8e9AqFhU0y7PKuInld7sqlwqPcRfWQtSmXVqd4P7T 0Sz6c52208f3vm1MGg6gaIWwmLGSt4wYuiOKDIC1tVQqs3Z7IMKLifh2qrNHxnvh Q7nSyPl0R8NcYQhv1qCIPUzT8sNxd3SNlT3EaOxmLIxP6z5QCuJOBozq8wDT0v+L lBgy7nxSNAYTKdH+SP7bQyOptX3WCQc3rA8gXWbgjDbJUD4c9YOq9DJEs4pqDAqP /TQMdMjPRzPVp5qxt4bUFGJLFPViNHi7NRbW4QCTfqKWVrr8zMow5KZ4vJtCHOkU Sny+gIeda4tx6SonqGCm =2bcN -----END PGP SIGNATURE----- Merge tag 'omap-for-v4.4/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Merge "omap dts changes for v4.4 merge window, part 2" from Tony Lindgren: Few more omap dts changes for v4.4 merge window, mostly to fix and clean up some omap5 issues to allow adding other omap5 boards. Also some other fixes and clean-up: - Fix SDIO WLAN for omap5 that's been broken for a while. As further patches are still needed for wl18xx, no need for stable on this one. - Move most of omap5 support into omap5-board-common.dtsi as most omap5 boards seem to share the same basic set of devices. - Add minimal IGEPv5 support using based on omap5-board-common.dtsi - Remove now unneedes gpio hogging for dra72-evm - Update Javier Martinez Canillas email address - Change earlier IGEP boards to use IOPAD pinmux macros * tag 'omap-for-v4.4/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x-base0033: Use IOPAD pinmux macro ARM: dts: am335x-igep0033: Use IOPAD pinmux macro ARM: dts: omap3-igep0020: Use IOPAD pinmux macro ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_ts ARM: dts: Update Javier Martinez Canillas's email ARM: dts: dra72-evm: remove cpsw gpio hogging and add mode-gpios ARM: dts: Add basic support for isee igepv5 ARM: dts: Move most of omap5-uevm.dts to omap5-board-common.dtsi ARM: dts: Fix WLAN regression on omap5-uevm |
|
|
Masahiro Yamada
|
13e77e6b52 |
ARM: dts: uniphier: add ProXstream2 Vodka board support
Initial version of DTS for ProXstream2 Vodka board. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
|
|
Masahiro Yamada
|
97593f7731 |
ARM: dts: uniphier: add ProXstream2 Gentil board support
Initial version of DTS for ProXstream2 Gentil board. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
|
|
Masahiro Yamada
|
06ff6b2d63 |
ARM: dts: uniphier: use stdout-path instead of console
Specifying both console and stdout-path is redundant. Add options ":115200n8" to stdout-path and drop "console=ttyS0,115200". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
|
|
Arnd Bergmann
|
a3de778b1f |
Highlights:
----------- - Use STiH418's A9 PLL - Add Ethernet support to STiH407 family -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJWH82EAAoJEMo4jShGhw+Jh6IQAMIukt+F11AS20ZtqNTlv4lY Nj6zPAWBtyobRQe44n+2L+6MLQiG115nWNvuS57/5I2m8Ps1BsnhkfvPeKbhJES4 jydFdxeEOfmV+N1YwIuOCuxc/aXo+XODrJWJNR+gRjVX364cEYvlkq2TyL415lvw m7D8syKKpECRQoZwiSbYh33nd5FEK+2fcGzWyjfvvSHoZyhYsaczN7pkpkLwfGkj j3eyKaSrzrNXjK5F6GbMuIaFRsKcsDpovwLM4i+QGY66jaFAQ1neJI4xC38KjL8g ptDpZdJ2AFedW3EFtbAWAaZ2dTtsVJQMSZK2GY4K+gowePsukreZhfbvDdLmJ0wa Riythd7drHpBm7CP1Ox9gxBgryOkcvy6tVdvQiyl2ruL2LjT6uVCsDpKulhq8BTv MdPYbRkcNmns2OEBOpIedNkiVNqx2O1JLNPVB7gviKM6pedUobM+pvdfYEB4JyBe eYr2cxSyaFUznQCfvIJOiQOeq2CwWoMBoB9NrmPvvwoiKfMj9joh5+rEUTrA6xMd ILNzHpxscqQbu81vpnUq8Q+GbwaW3QLzmkgf8EsB6GkxGVd9SicklUROz3ZM8Fsv gAgRmnteYM+c/0dF8/S3fPAL9my0Ueo606Ok+huUvNH17fQqV6CNUtJvjDWNPkVp 0LyyGPPukT5tydUM7i7N =nzUU -----END PGP SIGNATURE----- Merge tag 'sti-dt-for-v4.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti into next/dt Merge "STi DT changes for v4.4, round 2" from Maxime Coquelin: - Use STiH418's A9 PLL - Add Ethernet support to STiH407 family * tag 'sti-dt-for-v4.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti: ARM: STi: DT: Add support for stih418 A9 pll ARM: dts: Enable Ethernet on STi's B2199 board ARM: dts: Enable Ethernet on STi's B2120 boards ARM: dts: Add Ethernet node to STiH407 family ARM: dts: Fix RGMII pinctrl timings |
|
|
Vladimir Zapolskiy
|
7007c60c28 |
ARM: dts: WM8750: fix cpu compatible value
The change corrects cpu compatible property to a defined one, see Documentation/devicetree/bindings/arm/cpus.txt Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
|
|
Vladimir Zapolskiy
|
dffc912e2c |
ARM: dts: TI-Nspire: fix cpu compatible value
The change corrects cpu compatible property to a defined one, see Documentation/devicetree/bindings/arm/cpus.txt Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
|
|
Tomeu Vizoso
|
69636a85df |
ARM: dts: Add clocks to DISP1 domain in exynos5250
Adds to the node of the DISP1 power domain the two clocks that need to be reparented while the domain is powered off: CLK_MOUT_ACLK200_DISP1_SUB and CLK_MOUT_ACLK300_DISP1_SUB. Otherwise the state is unknown at power up and the mixer's clocks are all messed up. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Link: http://lkml.kernel.org/g/561CDC33.7050103@collabora.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org> |
|
|
Laurent Pinchart
|
1f7ce3d1c9 |
ARM: dts: Fix typo in regulator enable GPIO property in s5pv210-goni
The property name should be "gpio", not "gpios". Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org> |
|
|
Laurent Pinchart
|
698da378a3 |
ARM: dts: Fix typo in regulator enable GPIO property in s5pv210-aquila
The property name should be "gpio", not "gpios". Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org> |
|
|
Marek Szyprowski
|
4ae9a4c66c |
ARM: dts: Add vbus regulator to USB2 phy nodes on exynos3250, exynos4210 and exynos4412 boards
Exynos USB2 PHY driver now supports VBUS regulator, so add it to all boards which have it available. This also fixes commit |
|
|
Jaehoon Chung
|
b29dd5fa56 |
ARM: dts: use exynos5420-dw-mshc compatible for exynos3250
There are some differences of mobile storage host between exynos3250 and exnos5250. For example, exynos3250 supports the HS400 mode, but exynos5250 doesn't support it. Since exynos3250 can perform the similar function with exynos5420 compatible, this patch changes the compatible from exynos5250 to exynos5420 for mshc. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org> |
|
|
Olof Johansson
|
355d1ef1ad |
The i.MX device tree changes for 4.4:
- Add IOMUXC LPSR (Low Power State Retention) device for i.MX7D.
- Add a few low power mode related devices and touch controller for
i.MX6UL.
- Add a number of devices for i.MX7D SDB board support, USB, Dual FEC,
and eMMC5.0.
- i.MX6 Boundary Devices updates: relicense under GPLv2/X11, add Okaya
LCD, touch and wifi support, add new boards Nitrogen6_Lite and
Nitrogen6_Max.
- Enable touch screen and NAND Flash controller for a few Vybrid
devices.
- Some random and small updates on LS1021A and MXS support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWJQUPAAoJEFBXWFqHsHzOo+cH/irx+abVdFV97q6M0VwFsQ3/
Tf4/CsdiTjM5ZDrKZEtXzP8BZl+ZO4tQXLspP+wVceQ+PVUiVvdAHu0l68iuJRrA
+Bj9VrLIzMDf7FVpzbZHZD3kd1NALGh/5i0TerkuZMNl1KH57HyGjLnjKH43n7uz
mFPeZFAQMwSjEnRJj/6217Itqi+LurARJsnXQs6uhQ7feSsA88HU3EQ8QsiZqiAu
MULAJBYaE09shlokuXIKx67t8outdb8C0Uue64nt42y8NR0m5eVVG7NJoF+23T6C
CRX5zveYa7D2QXTkihvjdRpazhLiPnwV3RCVejLOZMk0G14hD9U39jkTp+9ws1w=
=kPBq
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
The i.MX device tree changes for 4.4:
- Add IOMUXC LPSR (Low Power State Retention) device for i.MX7D.
- Add a few low power mode related devices and touch controller for
i.MX6UL.
- Add a number of devices for i.MX7D SDB board support, USB, Dual FEC,
and eMMC5.0.
- i.MX6 Boundary Devices updates: relicense under GPLv2/X11, add Okaya
LCD, touch and wifi support, add new boards Nitrogen6_Lite and
Nitrogen6_Max.
- Enable touch screen and NAND Flash controller for a few Vybrid
devices.
- Some random and small updates on LS1021A and MXS support.
* tag 'imx-dt-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (53 commits)
ARM: dts: ls1021a: Add quirk for Erratum A009116
ARM: imx6sx-sdb: Fix typo in regulator enable GPIO property
ARM: dts: imx6: phyFLEX: fix typo in "pinctrl-names"
ARM: dts: imx6: change the core clock of spdif
ARM: dts: vf-colibri: enable NAND flash controller
ARM: dts: vf610twr: add NAND flash controller peripherial
ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board
ARM: dts: imx: add Boundary Devices Nitrogen6_Max board
ARM: dts: imx6dl-nitrogen6x: change manufacturer to Boundary Devices
ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices
of: Add Boundary Devices Inc. vendor prefix
ARM: dts: imx6qdl-sabrelite: relicense under GPLv2/X11
ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11
ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support
ARM: dts: imx6dql-nitrogen6x: add touchscreen support
ARM: dts: imx6qdl-sabrelite: add Okaya LCD panel
ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD panel
ARM: dts: vf500-colibri: Add device tree node for touchscreen support
ARM: dts: i.MX35: fix cpu compatible value
ARM: dts: i.MX31: fix cpu compatible value
...
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
|
Olof Johansson
|
de0b2a545c |
Delete regulator-compatible usage in mt8135-evbp1.dts.
The regualtor-compatible binding is deprecated, instead the node name is used. Mediatek timer driver supports as well mt8127, mt8135 and mt8173. Add these SOCs to the bindings list. Power domains venc and venc_lt need clocks two extra clocks to access their registers. We update the bindings documentation about this. Update SMP bindings documentation by adding support for mt6589 and mt81xx SOCs. Update mt8127.dtsi and mt8135.dtsi to enable SMP support. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJWI4nIAAoJELQ5Ylss8dNDznQQAK9O/IgeKz069P+UT/HxnflC K21RbkMX5KKej8QS23yqYxZVz+c2HyZLpYF5sAl/k9p5oMsm1EvfNVfDC7acWmfM CY65ZgNOPixi9Yrd29qgN0IMtTzsQtMnS7dhiKloyZr9sszuRw0SHeAQOOjGFv2H rZ+N7fbH3RH6vDeWIurVY8bNppu3FJNeIFm6xbotiXcQvsXX8hJjoN6E8BI7Rzg+ i/p80IEmGRFvxHebZjrRCgVFIdqIfo0M02kxNVc4erH+Z7mLOmHZuYXIg7S3825M E5W+mJd6fqNh62qbPZUi2/0Y9TAsOPiIpxU+QDp2cBO37nse2/MeWPhJyg6DfCO/ RuC0Y+tJx1fxF+5+/7lkXeWqsvzo5twJTGcLu+D0pPSTVb5Gy0P9671QMJPBknf+ 6zy4qqjSYNpsIz+OqbwlZHeQJEuDjt/DEVWqFmvW3DoUr5O8hRjHpFa4lJ6F084u tvSkSOuiJKtO1htAZLeVmMQOYylAPxpxKTc1AqIcLIiBkgkNKhz7v43vtdwETNIv 8qkJVNKGF8WNDdskM2/GamlC2hTabw8kMoPxeYtqzZz5BYBALeOND0TvclEMecnh nDzdTwlhJDdHOlT5hQ7ur9UecakFQSMzQnoJ35LbjU+lVKXOyFIphXuBAmlX7Fvi hgbvHY7WClquwgKJ+PUF =Lj7i -----END PGP SIGNATURE----- Merge tag 'v4.3-next-dts' of https://github.com/mbgg/linux-mediatek into next/dt Delete regulator-compatible usage in mt8135-evbp1.dts. The regualtor-compatible binding is deprecated, instead the node name is used. Mediatek timer driver supports as well mt8127, mt8135 and mt8173. Add these SOCs to the bindings list. Power domains venc and venc_lt need clocks two extra clocks to access their registers. We update the bindings documentation about this. Update SMP bindings documentation by adding support for mt6589 and mt81xx SOCs. Update mt8127.dtsi and mt8135.dtsi to enable SMP support. * tag 'v4.3-next-dts' of https://github.com/mbgg/linux-mediatek: ARM: dts: mt8127: enable basic SMP bringup for mt8127 ARM: dts: mt8135: enable basic SMP bringup for mt8135 devicetree: bindings: add new SMP enable method Mediatek SoC dt-bindings: soc: Add clocks for Mediatek SCPSYS unit dt-bindings: add more MediaTek SoC to mtk-timer binding ARM: dts: mt8135-evbp1: remove regulator-compatible usage Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Olof Johansson
|
4751424117 |
SPDIF device nodes for the newly added driver.
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABCAAGBQJWIlmfAAoJEPOmecmc0R2BQGIH/16YsYkAoxTnZBQ3dgRu5dpf 2vFkFZz11eQzdxIbaaMCNoDw6MeMZr3JsBg3vT3UkDbPnQD0US0dCETotXhs78An M07EyrUAVgIaJ4eyZtlGuC315uebSpj0uS9+oaiV0XaTP/WT2n+JNYci238Z96MZ +8+Kp3hfGHcTal2bWoJJLDwuJZRXdv5W/zXpSR5pi0eMM1z5A4RDokLwdOZt2Yup TxL1dhlIguOloXoT4zjMuv4nRqdiz/DnxyJtetT3mIhVE7/zVLm+wdziejipMrYN qISuUF3EYDikpaBv8fFdfRJs0kJMqIOeoGB0LmbuGSM9BnG0xCw0X5O6/jDuy7U= =4bh1 -----END PGP SIGNATURE----- Merge tag 'v4.4-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt SPDIF device nodes for the newly added driver. * tag 'v4.4-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Add SPDIF optical out on Radxa Rock2 Square ARM: dts: rockchip: Add SPDIF transceiver for RK3288 ARM: dts: rockchip: Add SPDIF optical out on Radxa Rock ARM: dts: rockchip: Add SPDIF transceiver for RK3188 Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Olof Johansson
|
d8f440b6aa |
Allwinner DT changes for 4.4, round 2
More DT patches for 4.4, mostly with new boards coming in (CHIP, BananaPi M2, pcduino2), further consolidation for the q8-based designs and a bunch of random patches enhancing support for existing boards -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJWInnmAAoJEBx+YmzsjxAg6u8P/AvVaiwT4/XrwD1G4ms47+kq gRFLJ5xqWWnY0285Uaf4A33fU60dIJwYz4qbAiHdCOWZ+/bQy1lVNiB1o+RdKjIh zJHYbpKKREArwoanw9JogwpeSBVU5QnsoHeEHxPfYWHBnluU8cfKeS6Xgd1CQz1G oV00i4H0HjBNbEJCbZnyGPbZoeFbzkpFJ8Pb26W2Xv6bG4dwH7uI/Kzq672G+Uop uPa908Gwvid/HFNI4pQKgg1JGk6F08zM1pO9HwHdF3bxUs6Jl7IDnxhv7Q1BpbYo u6vNs7YP8SzUoTAlaEDwdCLUtH0S/PZs+ZkAMo43JAztFXHmf72HDId+XTznqQkZ nEk5p6yUAykSAGlXf3nj2ET6jlitjUqkhk909YpcowAlTloEjbdbijabixZgDfql jqF8WNSc3ilYrqTl+3TGsP+GupTQdl0S7XFyBgCTAQFhOTFPf6UognWJfWEmnHuR /lTRjPTt84DZ0o1zCHLfzpHFCE/jP+lGDmLc7aOQLxVZuUK4KsIjyilNGIcJgLKv dQNNHQKAi15KMLuLzhnxfmcCBTr0FxIgvlZEW/BeQ5O+LIbAYw0wPRyxiPuYdHTf Ro3z6Osex0YFSmjyGiKH3NaqbEAHfmPJB/SoGsbcmWcRSX+yPLYs/6wB3P3vgfmO Jd2TnpNnEGGaX6oUuPoG =vcTX -----END PGP SIGNATURE----- Merge tag 'sunxi-dt-for-4.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt Allwinner DT changes for 4.4, round 2 More DT patches for 4.4, mostly with new boards coming in (CHIP, BananaPi M2, pcduino2), further consolidation for the q8-based designs and a bunch of random patches enhancing support for existing boards * tag 'sunxi-dt-for-4.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (27 commits) ARM: dts: sun6i: Add a dts file for the Sinovoip BPI-M2 board ARM: dts: sun6i: Add mmc2_pins_a pinmux setting to sun6i-a31.dtsi ARM: dts: sunxi: Fix interrupt-cells for [r]pio on A23/A31/A33/A80 ARM: dts: sun8i: Add NMI interrupt controller node ARM: dts: sun6i: hummingbird: Enable AXP221 DC5LDO regulator as "vdd-cpus" ARM: dts: sun6i: hummingbird: Use axp22x.dtsi for AXP221 regulators ARM: dts: sun6i: hummingbird: Fix VDD-CPU and VDD-GPU regulator names ARM: dts: sun7i: Add regulator configuration for pcDuino v3 Nano ARM: dts: sun6i: Turn on gmac on Colombus ARM: dts: sun8i: Make et-q8-v1.6.dts a symlink to q8-tablet.dts ARM: dts: sun8i: Make ippo-q8h-v*.dts a symlink to q8-tablet.dts ARM: dts: sun8i: Add sun8i-a23-q8-tablet.dts file ARM: dts: sun5i: Add backlight node to sun5i-q8-common.dtsi ARM: dts: sunxi: Enable PWM controller on Q8 format tablets ARM: dts: sun5i: Add PWM channel 0 pinmux setting for A13/A10s ARM: dts: sun5i: Add PWM controller node for A13 / A10s ARM: sun5i: Add C.H.I.P DTS ARM: dts: sunxi: Add dtsi for AXP22x PMIC ARM: dts: sun7i: Correct USB regulators on pcDuino v3 Nano ARM: sun5i: dt: Add UART3 CTS and RTS pins ... Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Eric Anholt
|
121432c7a0 |
ARM: bcm2835: Add the DDC I2C controller to the device tree.
We need to use it for getting video modes over HDMI. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Stephen Warren <swarren@wwwdotorg.org> |
|
|
Eric Anholt
|
94cb7f76ca |
ARM: bcm2835: Switch to using the new clock driver support.
This will give us the ability to set the pixel and HDMI state machine clocks for the VC4 KMS driver, change the CPU frequency, and potentially gate clocks in the future (once we also write a power domain driver). It also gives the uart an explicit clock reference, so that we don't need to change the physical addresses of the old fixed clk_bcm2835.c clocks for Raspberry Pi 2 port. Two clocks get their frequencies updated as a result of this. One is uart's apb_pclk, which was previously accidentally grabbing the fixed uart0_pclk due to the apb_pclk not having clk_register_clkdev() called. The uart doesn't seem to do anything with apb_pclk other than make sure it's on, so that appears safe (also, as far as I can see, the apb clock is actually the same as the VPU clock). The other is EMMC, which according to the docs was supposed to be in the 50-100Mhz range, but it turns out the firmware needed to change to running it at the 250Mhz core clock speed to avoid a bug in clock domain crossing. Additionally, anything using BCM2835_CLOCK_VPU will now have a correct clock rate if the user configures the boot-time core clock speed using config.txt. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Stephen Warren <swarren@wwwdotorg.org> |
|
|
Karsten Merker
|
a5ea06d0bc |
ARM: dts: sun6i: Add dts file for MSI Primo81 tablet
The MSI Primo81 is an A31s based tablet, with 1G RAM, 16G NAND, 768x1024 IPS LCD display, mono speaker, 0.3 MP front camera, 2.0 MP rear camera, 3500 mAh battery, gt911 touchscreen, mma8452 accelerometer and rtl8188etv usb wifi. Has "power", "volume+" and "volume-" buttons (both volume buttons are also connected to the UBOOT_SEL pin). The external connectors are represented by MicroSD slot, MiniHDMI, MicroUSB OTG and 3.5mm headphone jack. USB OTG is enabled in host only mode. AXP221 USB power supply and GPIO support are required for full USB OTG support. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> |
|
|
Chen-Yu Tsai
|
c0949308dd |
ARM: dts: sun6i: Add simplefb node labels to reference at board level
Some boards, such as tablets, have regulators providing power to parts of the display pipeline, like signal converters and LCD panels. Add labels to the simplefb device nodes so that we can reference them in the board dts files to add regulator supply properties. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> |