mirror of https://gitee.com/openkylin/linux.git
330 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Sami Tolvanen
|
cf68fffb66 |
add support for Clang CFI
This change adds support for Clang’s forward-edge Control Flow Integrity (CFI) checking. With CONFIG_CFI_CLANG, the compiler injects a runtime check before each indirect function call to ensure the target is a valid function with the correct static type. This restricts possible call targets and makes it more difficult for an attacker to exploit bugs that allow the modification of stored function pointers. For more details, see: https://clang.llvm.org/docs/ControlFlowIntegrity.html Clang requires CONFIG_LTO_CLANG to be enabled with CFI to gain visibility to possible call targets. Kernel modules are supported with Clang’s cross-DSO CFI mode, which allows checking between independently compiled components. With CFI enabled, the compiler injects a __cfi_check() function into the kernel and each module for validating local call targets. For cross-module calls that cannot be validated locally, the compiler calls the global __cfi_slowpath_diag() function, which determines the target module and calls the correct __cfi_check() function. This patch includes a slowpath implementation that uses __module_address() to resolve call targets, and with CONFIG_CFI_CLANG_SHADOW enabled, a shadow map that speeds up module look-ups by ~3x. Clang implements indirect call checking using jump tables and offers two methods of generating them. With canonical jump tables, the compiler renames each address-taken function to <function>.cfi and points the original symbol to a jump table entry, which passes __cfi_check() validation. This isn’t compatible with stand-alone assembly code, which the compiler doesn’t instrument, and would result in indirect calls to assembly code to fail. Therefore, we default to using non-canonical jump tables instead, where the compiler generates a local jump table entry <function>.cfi_jt for each address-taken function, and replaces all references to the function with the address of the jump table entry. Note that because non-canonical jump table addresses are local to each component, they break cross-module function address equality. Specifically, the address of a global function will be different in each module, as it's replaced with the address of a local jump table entry. If this address is passed to a different module, it won’t match the address of the same function taken there. This may break code that relies on comparing addresses passed from other components. CFI checking can be disabled in a function with the __nocfi attribute. Additionally, CFI can be disabled for an entire compilation unit by filtering out CC_FLAGS_CFI. By default, CFI failures result in a kernel panic to stop a potential exploit. CONFIG_CFI_PERMISSIVE enables a permissive mode, where the kernel prints out a rate-limited warning instead, and allows execution to continue. This option is helpful for locating type mismatches, but should only be enabled during development. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210408182843.1754385-2-samitolvanen@google.com |
|
|
Linus Torvalds
|
2bd3f4eeb3 |
orphan-handling fix for v5.12-rc1
- Define SANTIZER_DISCARDS with CONFIG_GCOV_KERNEL=y (Nathan Chancellor)
-----BEGIN PGP SIGNATURE-----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=A/Ky
-----END PGP SIGNATURE-----
Merge tag 'orphan-handling-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull orphan handling fix from Kees Cook:
"Another case of bogus .eh_frame emission was noticed under
CONFIG_GCOV_KERNEL=y.
Summary:
- Define SANITIZER_DISCARDS with CONFIG_GCOV_KERNEL=y (Nathan
Chancellor)"
* tag 'orphan-handling-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
vmlinux.lds.h: Define SANITIZER_DISCARDS with CONFIG_GCOV_KERNEL=y
|
|
|
Nathan Chancellor
|
f5b6a74d9c |
vmlinux.lds.h: Define SANTIZER_DISCARDS with CONFIG_GCOV_KERNEL=y
clang produces .eh_frame sections when CONFIG_GCOV_KERNEL is enabled, even when -fno-asynchronous-unwind-tables is in KBUILD_CFLAGS: $ make CC=clang vmlinux ... ld: warning: orphan section `.eh_frame' from `init/main.o' being placed in section `.eh_frame' ld: warning: orphan section `.eh_frame' from `init/version.o' being placed in section `.eh_frame' ld: warning: orphan section `.eh_frame' from `init/do_mounts.o' being placed in section `.eh_frame' ld: warning: orphan section `.eh_frame' from `init/do_mounts_initrd.o' being placed in section `.eh_frame' ld: warning: orphan section `.eh_frame' from `init/initramfs.o' being placed in section `.eh_frame' ld: warning: orphan section `.eh_frame' from `init/calibrate.o' being placed in section `.eh_frame' ld: warning: orphan section `.eh_frame' from `init/init_task.o' being placed in section `.eh_frame' ... $ rg "GCOV_KERNEL|GCOV_PROFILE_ALL" .config CONFIG_GCOV_KERNEL=y CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y CONFIG_GCOV_PROFILE_ALL=y This was already handled for a couple of other options in commit |
|
|
Linus Torvalds
|
a6525b9999 |
- added n64 block driver
- fix for ubsan warnings - fix for bcm63xx platform - update of linux-mips mailinglist -----BEGIN PGP SIGNATURE----- iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAmA3+WoaHHRzYm9nZW5k QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHB+mw/9HVN4BVGO6PM62ZH/WOYc M6G8i0Bfa/ZO0XLiFMMUVlRtDkbXWaNbNIzO6f3ud6Me1+D3aLW8j4yhhVs+yki0 SuspDPDAwtnmsE1DMnr21eL+p5VSaMhdCLdL2pAWErLHBy3oXLSJ1kajhuMs+vVp 2Zq7k1rjJdiYAULep21VDi0CQfTTudFOCkJs0AqbSA6tmPiFZXp8Y/rDOHAu2wro 6iNd4qkh9ASpFgWWWBVuPmsKbTNAEaYIcjGMMm692sraKYOKxqeaCfwyG2odMNFk If8tnFJgRg+wdS+ZUnX/R9cxrSrZ/QeoUOl6qGUnJWodhlGpm/nSjYSYm5mS7mVX FPnG2NWjw6pvhf3reupyS4JqcdLJ9Ldk8KJZe8rLXIcrgd90kuMj0ahoc8NY04rs /ZMVLWZ72XgFvEJeCWdXWvVf21gi3F0MGFJiGPHXTk1leDhNLRFR+ExaEPRjt1HK KENlBNuXzO790EyfDe/Z7Abq3r4wf17RmXHcoU1FLSRxBtIT8gwF2E4jZB6gzlh7 WaXVHAkxyP0AO11Zo6h/eWaeeulH8lnPSKVvDL4px/apsvnlE56IPClBAMT3Fhhy ZEiFIiT7eJzs4reDnB9PxxySR4v79xQTdv9jRi1f3wVRQiNaqkGdcrAaj9SVeck5 FsD/Desev/Hu1+maUlY221g= =KT2b -----END PGP SIGNATURE----- Merge tag 'mips_5.12_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull more MIPS updates from Thomas Bogendoerfer: - added n64 block driver - fix for ubsan warnings - fix for bcm63xx platform - update of linux-mips mailinglist * tag 'mips_5.12_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: arch: mips: update references to current linux-mips list mips: bmips: init clocks earlier vmlinux.lds.h: catch even more instrumentation symbols into .data n64: store dev instance into disk private data n64: cleanup n64cart_probe() n64: cosmetics changes n64: remove curly brackets n64: use sector SECTOR_SHIFT instead 512 n64: use enums for reg n64: move module param at the top n64: move module info at the end n64: use pr_fmt to avoid duplicate string block: Add n64 cart driver |
|
|
Linus Torvalds
|
6fbd6cf85a |
Kbuild updates for v5.12
- Fix false-positive build warnings for ARCH=ia64 builds
- Optimize dictionary size for module compression with xz
- Check the compiler and linker versions in Kconfig
- Fix misuse of extra-y
- Support DWARF v5 debug info
- Clamp SUBLEVEL to 255 because stable releases 4.4.x and 4.9.x
exceeded the limit
- Add generic syscall{tbl,hdr}.sh for cleanups across arches
- Minor cleanups of genksyms
- Minor cleanups of Kconfig
-----BEGIN PGP SIGNATURE-----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=sLxb
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Fix false-positive build warnings for ARCH=ia64 builds
- Optimize dictionary size for module compression with xz
- Check the compiler and linker versions in Kconfig
- Fix misuse of extra-y
- Support DWARF v5 debug info
- Clamp SUBLEVEL to 255 because stable releases 4.4.x and 4.9.x
exceeded the limit
- Add generic syscall{tbl,hdr}.sh for cleanups across arches
- Minor cleanups of genksyms
- Minor cleanups of Kconfig
* tag 'kbuild-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (38 commits)
initramfs: Remove redundant dependency of RD_ZSTD on BLK_DEV_INITRD
kbuild: remove deprecated 'always' and 'hostprogs-y/m'
kbuild: parse C= and M= before changing the working directory
kbuild: reuse this-makefile to define abs_srctree
kconfig: unify rule of config, menuconfig, nconfig, gconfig, xconfig
kconfig: omit --oldaskconfig option for 'make config'
kconfig: fix 'invalid option' for help option
kconfig: remove dead code in conf_askvalue()
kconfig: clean up nested if-conditionals in check_conf()
kconfig: Remove duplicate call to sym_get_string_value()
Makefile: Remove # characters from compiler string
Makefile: reuse CC_VERSION_TEXT
kbuild: check the minimum linker version in Kconfig
kbuild: remove ld-version macro
scripts: add generic syscallhdr.sh
scripts: add generic syscalltbl.sh
arch: syscalls: remove $(srctree)/ prefix from syscall tables
arch: syscalls: add missing FORCE and fix 'targets' to make if_changed work
gen_compile_commands: prune some directories
kbuild: simplify access to the kernel's version
...
|
|
|
Linus Torvalds
|
21a6ab2131 |
Modules updates for v5.12
Summary of modules changes for the 5.12 merge window:
- Retire EXPORT_UNUSED_SYMBOL() and EXPORT_SYMBOL_GPL_FUTURE(). These export
types were introduced between 2006 - 2008. All the of the unused symbols have
been long removed and gpl future symbols were converted to gpl quite a long
time ago, and I don't believe these export types have been used ever since.
So, I think it should be safe to retire those export types now. (Christoph Hellwig)
- Refactor and clean up some aged code cruft in the module loader (Christoph Hellwig)
- Build {,module_}kallsyms_on_each_symbol only when livepatching is enabled, as
it is the only caller (Christoph Hellwig)
- Unexport find_module() and module_mutex and fix the last module
callers to not rely on these anymore. Make module_mutex internal to
the module loader. (Christoph Hellwig)
- Harden ELF checks on module load and validate ELF structures before checking
the module signature (Frank van der Linden)
- Fix undefined symbol warning for clang (Fangrui Song)
- Fix smatch warning (Dan Carpenter)
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=T29Q
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
- Retire EXPORT_UNUSED_SYMBOL() and EXPORT_SYMBOL_GPL_FUTURE(). These
export types were introduced between 2006 - 2008. All the of the
unused symbols have been long removed and gpl future symbols were
converted to gpl quite a long time ago, and I don't believe these
export types have been used ever since. So, I think it should be safe
to retire those export types now (Christoph Hellwig)
- Refactor and clean up some aged code cruft in the module loader
(Christoph Hellwig)
- Build {,module_}kallsyms_on_each_symbol only when livepatching is
enabled, as it is the only caller (Christoph Hellwig)
- Unexport find_module() and module_mutex and fix the last module
callers to not rely on these anymore. Make module_mutex internal to
the module loader (Christoph Hellwig)
- Harden ELF checks on module load and validate ELF structures before
checking the module signature (Frank van der Linden)
- Fix undefined symbol warning for clang (Fangrui Song)
- Fix smatch warning (Dan Carpenter)
* tag 'modules-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: potential uninitialized return in module_kallsyms_on_each_symbol()
module: remove EXPORT_UNUSED_SYMBOL*
module: remove EXPORT_SYMBOL_GPL_FUTURE
module: move struct symsearch to module.c
module: pass struct find_symbol_args to find_symbol
module: merge each_symbol_section into find_symbol
module: remove each_symbol_in_section
module: mark module_mutex static
kallsyms: only build {,module_}kallsyms_on_each_symbol when required
kallsyms: refactor {,module_}kallsyms_on_each_symbol
module: use RCU to synchronize find_module
module: unexport find_module and module_mutex
drm: remove drm_fb_helper_modinit
powerpc/powernv: remove get_cxl_module
module: harden ELF info handling
module: Ignore _GLOBAL_OFFSET_TABLE_ when warning for undefined symbols
|
|
|
Linus Torvalds
|
79db4d2293 |
clang-lto series for v5.12-rc1
- Clang LTO build infrastructure and arm64-specific enablement (Sami Tolvanen)
- Recursive build CC_FLAGS_LTO fix (Alexander Lobakin)
-----BEGIN PGP SIGNATURE-----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=6peY
-----END PGP SIGNATURE-----
Merge tag 'clang-lto-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull clang LTO updates from Kees Cook:
"Clang Link Time Optimization.
This is built on the work done preparing for LTO by arm64 folks,
tracing folks, etc. This includes the core changes as well as the
remaining pieces for arm64 (LTO has been the default build method on
Android for about 3 years now, as it is the prerequisite for the
Control Flow Integrity protections).
While x86 LTO enablement is done, it depends on some pending objtool
clean-ups. It's possible that I'll send a "part 2" pull request for
LTO that includes x86 support.
For merge log posterity, and as detailed in commit
|
|
|
Alexander Lobakin
|
49387f6288 |
vmlinux.lds.h: catch even more instrumentation symbols into .data
LKP caught another bunch of orphaned instrumentation symbols [0]: mipsel-linux-ld: warning: orphan section `.data.$LPBX1' from `init/main.o' being placed in section `.data.$LPBX1' mipsel-linux-ld: warning: orphan section `.data.$LPBX0' from `init/main.o' being placed in section `.data.$LPBX0' mipsel-linux-ld: warning: orphan section `.data.$LPBX1' from `init/do_mounts.o' being placed in section `.data.$LPBX1' mipsel-linux-ld: warning: orphan section `.data.$LPBX0' from `init/do_mounts.o' being placed in section `.data.$LPBX0' mipsel-linux-ld: warning: orphan section `.data.$LPBX1' from `init/do_mounts_initrd.o' being placed in section `.data.$LPBX1' mipsel-linux-ld: warning: orphan section `.data.$LPBX0' from `init/do_mounts_initrd.o' being placed in section `.data.$LPBX0' mipsel-linux-ld: warning: orphan section `.data.$LPBX1' from `init/initramfs.o' being placed in section `.data.$LPBX1' mipsel-linux-ld: warning: orphan section `.data.$LPBX0' from `init/initramfs.o' being placed in section `.data.$LPBX0' mipsel-linux-ld: warning: orphan section `.data.$LPBX1' from `init/calibrate.o' being placed in section `.data.$LPBX1' mipsel-linux-ld: warning: orphan section `.data.$LPBX0' from `init/calibrate.o' being placed in section `.data.$LPBX0' [...] Soften the wildcard to .data.$L* to grab these ones into .data too. [0] https://lore.kernel.org/lkml/202102231519.lWPLPveV-lkp@intel.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
|
|
Linus Torvalds
|
2671fe5e1d |
- added support for Nintendo N64
- added support for Realtek RTL83XX SoCs
- kaslr support for Loongson64
- first steps to get rid of set_fs()
- DMA runtime coherent/non-coherent selection cleanup
- cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=kQfQ
-----END PGP SIGNATURE-----
Merge tag 'mips_5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- added support for Nintendo N64
- added support for Realtek RTL83XX SoCs
- kaslr support for Loongson64
- first steps to get rid of set_fs()
- DMA runtime coherent/non-coherent selection cleanup
- cleanups and fixes
* tag 'mips_5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (98 commits)
Revert "MIPS: Add basic support for ptrace single step"
vmlinux.lds.h: catch more UBSAN symbols into .data
MIPS: kernel: Drop kgdb_call_nmi_hook
MAINTAINERS: Add git tree for KVM/mips
MIPS: Use common way to parse elfcorehdr
MIPS: Simplify EVA cache handling
Revert "MIPS: kernel: {ftrace,kgdb}: Set correct address limit for cache flushes"
MIPS: remove CONFIG_DMA_PERDEV_COHERENT
MIPS: remove CONFIG_DMA_MAYBE_COHERENT
driver core: lift dma_default_coherent into common code
MIPS: refactor the runtime coherent vs noncoherent DMA indicators
MIPS/alchemy: factor out the DMA coherent setup
MIPS/malta: simplify plat_setup_iocoherency
MIPS: Add basic support for ptrace single step
MAINTAINERS: replace non-matching patterns for loongson{2,3}
MIPS: Make check condition for SDBBP consistent with EJTAG spec
mips: Replace lkml.org links with lore
Revert "MIPS: microMIPS: Fix the judgment of mm_jr16_op and mm_jalr_op"
MIPS: crash_dump.c: Simplify copy_oldmem_page()
Revert "mips: Manually call fdt_init_reserved_mem() method"
...
|
|
|
Linus Torvalds
|
657bd90c93 |
Scheduler updates for v5.12:
[ NOTE: unfortunately this tree had to be freshly rebased today,
it's a same-content tree of 82891be90f3c (-next published)
merged with v5.11.
The main reason for the rebase was an authorship misattribution
problem with a new commit, which we noticed in the last minute,
and which we didn't want to be merged upstream. The offending
commit was deep in the tree, and dependent commits had to be
rebased as well. ]
- Core scheduler updates:
- Add CONFIG_PREEMPT_DYNAMIC: this in its current form adds the
preempt=none/voluntary/full boot options (default: full),
to allow distros to build a PREEMPT kernel but fall back to
close to PREEMPT_VOLUNTARY (or PREEMPT_NONE) runtime scheduling
behavior via a boot time selection.
There's also the /debug/sched_debug switch to do this runtime.
This feature is implemented via runtime patching (a new variant of static calls).
The scope of the runtime patching can be best reviewed by looking
at the sched_dynamic_update() function in kernel/sched/core.c.
( Note that the dynamic none/voluntary mode isn't 100% identical,
for example preempt-RCU is available in all cases, plus the
preempt count is maintained in all models, which has runtime
overhead even with the code patching. )
The PREEMPT_VOLUNTARY/PREEMPT_NONE models, used by the vast majority
of distributions, are supposed to be unaffected.
- Fix ignored rescheduling after rcu_eqs_enter(). This is a bug that
was found via rcutorture triggering a hang. The bug is that
rcu_idle_enter() may wake up a NOCB kthread, but this happens after
the last generic need_resched() check. Some cpuidle drivers fix it
by chance but many others don't.
In true 2020 fashion the original bug fix has grown into a 5-patch
scheduler/RCU fix series plus another 16 RCU patches to address
the underlying issue of missed preemption events. These are the
initial fixes that should fix current incarnations of the bug.
- Clean up rbtree usage in the scheduler, by providing & using the following
consistent set of rbtree APIs:
partial-order; less() based:
- rb_add(): add a new entry to the rbtree
- rb_add_cached(): like rb_add(), but for a rb_root_cached
total-order; cmp() based:
- rb_find(): find an entry in an rbtree
- rb_find_add(): find an entry, and add if not found
- rb_find_first(): find the first (leftmost) matching entry
- rb_next_match(): continue from rb_find_first()
- rb_for_each(): iterate a sub-tree using the previous two
- Improve the SMP/NUMA load-balancer: scan for an idle sibling in a single pass.
This is a 4-commit series where each commit improves one aspect of the idle
sibling scan logic.
- Improve the cpufreq cooling driver by getting the effective CPU utilization
metrics from the scheduler
- Improve the fair scheduler's active load-balancing logic by reducing the number
of active LB attempts & lengthen the load-balancing interval. This improves
stress-ng mmapfork performance.
- Fix CFS's estimated utilization (util_est) calculation bug that can result in
too high utilization values
- Misc updates & fixes:
- Fix the HRTICK reprogramming & optimization feature
- Fix SCHED_SOFTIRQ raising race & warning in the CPU offlining code
- Reduce dl_add_task_root_domain() overhead
- Fix uprobes refcount bug
- Process pending softirqs in flush_smp_call_function_from_idle()
- Clean up task priority related defines, remove *USER_*PRIO and
USER_PRIO()
- Simplify the sched_init_numa() deduplication sort
- Documentation updates
- Fix EAS bug in update_misfit_status(), which degraded the quality
of energy-balancing
- Smaller cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=pyaG
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core scheduler updates:
- Add CONFIG_PREEMPT_DYNAMIC: this in its current form adds the
preempt=none/voluntary/full boot options (default: full), to allow
distros to build a PREEMPT kernel but fall back to close to
PREEMPT_VOLUNTARY (or PREEMPT_NONE) runtime scheduling behavior via
a boot time selection.
There's also the /debug/sched_debug switch to do this runtime.
This feature is implemented via runtime patching (a new variant of
static calls).
The scope of the runtime patching can be best reviewed by looking
at the sched_dynamic_update() function in kernel/sched/core.c.
( Note that the dynamic none/voluntary mode isn't 100% identical,
for example preempt-RCU is available in all cases, plus the
preempt count is maintained in all models, which has runtime
overhead even with the code patching. )
The PREEMPT_VOLUNTARY/PREEMPT_NONE models, used by the vast
majority of distributions, are supposed to be unaffected.
- Fix ignored rescheduling after rcu_eqs_enter(). This is a bug that
was found via rcutorture triggering a hang. The bug is that
rcu_idle_enter() may wake up a NOCB kthread, but this happens after
the last generic need_resched() check. Some cpuidle drivers fix it
by chance but many others don't.
In true 2020 fashion the original bug fix has grown into a 5-patch
scheduler/RCU fix series plus another 16 RCU patches to address the
underlying issue of missed preemption events. These are the initial
fixes that should fix current incarnations of the bug.
- Clean up rbtree usage in the scheduler, by providing & using the
following consistent set of rbtree APIs:
partial-order; less() based:
- rb_add(): add a new entry to the rbtree
- rb_add_cached(): like rb_add(), but for a rb_root_cached
total-order; cmp() based:
- rb_find(): find an entry in an rbtree
- rb_find_add(): find an entry, and add if not found
- rb_find_first(): find the first (leftmost) matching entry
- rb_next_match(): continue from rb_find_first()
- rb_for_each(): iterate a sub-tree using the previous two
- Improve the SMP/NUMA load-balancer: scan for an idle sibling in a
single pass. This is a 4-commit series where each commit improves
one aspect of the idle sibling scan logic.
- Improve the cpufreq cooling driver by getting the effective CPU
utilization metrics from the scheduler
- Improve the fair scheduler's active load-balancing logic by
reducing the number of active LB attempts & lengthen the
load-balancing interval. This improves stress-ng mmapfork
performance.
- Fix CFS's estimated utilization (util_est) calculation bug that can
result in too high utilization values
Misc updates & fixes:
- Fix the HRTICK reprogramming & optimization feature
- Fix SCHED_SOFTIRQ raising race & warning in the CPU offlining code
- Reduce dl_add_task_root_domain() overhead
- Fix uprobes refcount bug
- Process pending softirqs in flush_smp_call_function_from_idle()
- Clean up task priority related defines, remove *USER_*PRIO and
USER_PRIO()
- Simplify the sched_init_numa() deduplication sort
- Documentation updates
- Fix EAS bug in update_misfit_status(), which degraded the quality
of energy-balancing
- Smaller cleanups"
* tag 'sched-core-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
sched,x86: Allow !PREEMPT_DYNAMIC
entry/kvm: Explicitly flush pending rcuog wakeup before last rescheduling point
entry: Explicitly flush pending rcuog wakeup before last rescheduling point
rcu/nocb: Trigger self-IPI on late deferred wake up before user resume
rcu/nocb: Perform deferred wake up before last idle's need_resched() check
rcu: Pull deferred rcuog wake up to rcu_eqs_enter() callers
sched/features: Distinguish between NORMAL and DEADLINE hrtick
sched/features: Fix hrtick reprogramming
sched/deadline: Reduce rq lock contention in dl_add_task_root_domain()
uprobes: (Re)add missing get_uprobe() in __find_uprobe()
smp: Process pending softirqs in flush_smp_call_function_from_idle()
sched: Harden PREEMPT_DYNAMIC
static_call: Allow module use without exposing static_call_key
sched: Add /debug/sched_preempt
preempt/dynamic: Support dynamic preempt with preempt= boot option
preempt/dynamic: Provide irqentry_exit_cond_resched() static call
preempt/dynamic: Provide preempt_schedule[_notrace]() static calls
preempt/dynamic: Provide cond_resched() and might_resched() static calls
preempt: Introduce CONFIG_PREEMPT_DYNAMIC
static_call: Provide DEFINE_STATIC_CALL_RET0()
...
|
|
|
Linus Torvalds
|
02f9fc286e |
Power management updates for 5.12-rc1
- Add new power capping facility called DTPM (Dynamic Thermal Power
Management), based on the existing power capping framework, to
allow aggregate power constraints to be applied to sets of devices
in a distributed manner, along with a CPU backend driver based on
the Energy Model (Daniel Lezcano, Dan Carpenter, Colin Ian King).
- Add AlderLake Mobile support to the Intel RAPL power capping
driver and make it use the topology interface when laying out the
system topology (Zhang Rui, Yunfeng Ye).
- Drop the cpufreq tango driver belonging to a platform that is not
supported any more (Arnd Bergmann).
- Drop the redundant CPUFREQ_STICKY and CPUFREQ_PM_NO_WARN cpufreq
driver flags (Viresh Kumar).
- Update cpufreq drivers:
* Fix max CPU frequency discovery in the intel_pstate driver and
make janitorial changes in it (Chen Yu, Rafael Wysocki, Nigel
Christian).
* Fix resource leaks in the brcmstb-avs-cpufreq driver (Christophe
JAILLET).
* Make the tegra20 driver use the resource-managed API (Dmitry
Osipenko).
* Enable boost support in the qcom-hw driver (Shawn Guo).
- Update the operating performance points (OPP) framework:
* Clean up the OPP core (Dmitry Osipenko, Viresh Kumar).
* Extend the OPP API by adding new helpers to it (Dmitry Osipenko,
Viresh Kumar).
* Allow required OPPs to be used for devfreq devices and update
the devfreq governor code accordingly (Saravana Kannan).
* Prepare the framework for introducing new dev_pm_opp_set_opp()
helper (Viresh Kumar).
* Drop dev_pm_opp_set_bw() and update related drivers (Viresh
Kumar).
* Allow lazy linking of required-OPPs (Viresh Kumar).
- Simplify and clean up devfreq somewhat (Lukasz Luba, Yang Li,
Pierre Kuo).
- Update the generic power domains (genpd) framework:
* Use device's next wakeup to determine domain idle state (Lina
Iyer).
* Improve initialization and debug (Dmitry Osipenko).
* Simplify computations (Abaci Team).
- Make janitorial changes in the core code handling system sleep
and PM-runtime (Bhaskar Chowdhury, Bjorn Helgaas, Rikard Falkeborn,
Zqiang).
- Update the MAINTAINERS entry for the exynos cpuidle driver and
drop DEBUG definition from intel_idle (Krzysztof Kozlowski, Tom
Rix).
- Extend the PM clock layer to cover clocks that must sleep (Nicolas
Pitre).
- Update the cpupower utility:
* Update cpupower command, add support for AMD family 0x19 and clean
up the code to remove many of the family checks to make future
family updates easier (Nathan Fontenot, Robert Richter).
* Add Makefile dependencies for install targets to allow building
cpupower in parallel rather than serially (Ivan Babrou).
- Make janitorial changes in power management Kconfig (Lukasz Luba).
-----BEGIN PGP SIGNATURE-----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=9xhj
-----END PGP SIGNATURE-----
Merge tag 'pm-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add a new power capping facility allowing aggregate power
constraints to be applied to sets of devices in a distributed manner,
add a new CPU ID to the RAPL power capping driver and improve it, drop
a cpufreq driver belonging to a platform that is not supported any
more, drop two redundant cpufreq driver flags, update cpufreq drivers
(intel_pstate, brcmstb-avs, qcom-hw), update the operating performance
points (OPP) framework (code cleanups, new helpers, devfreq-related
modifications), clean up devfreq, extend the PM clock layer, update
the cpupower utility and make assorted janitorial changes.
Specifics:
- Add new power capping facility called DTPM (Dynamic Thermal Power
Management), based on the existing power capping framework, to
allow aggregate power constraints to be applied to sets of devices
in a distributed manner, along with a CPU backend driver based on
the Energy Model (Daniel Lezcano, Dan Carpenter, Colin Ian King).
- Add AlderLake Mobile support to the Intel RAPL power capping driver
and make it use the topology interface when laying out the system
topology (Zhang Rui, Yunfeng Ye).
- Drop the cpufreq tango driver belonging to a platform that is not
supported any more (Arnd Bergmann).
- Drop the redundant CPUFREQ_STICKY and CPUFREQ_PM_NO_WARN cpufreq
driver flags (Viresh Kumar).
- Update cpufreq drivers:
* Fix max CPU frequency discovery in the intel_pstate driver and
make janitorial changes in it (Chen Yu, Rafael Wysocki, Nigel
Christian).
* Fix resource leaks in the brcmstb-avs-cpufreq driver (Christophe
JAILLET).
* Make the tegra20 driver use the resource-managed API (Dmitry
Osipenko).
* Enable boost support in the qcom-hw driver (Shawn Guo).
- Update the operating performance points (OPP) framework:
* Clean up the OPP core (Dmitry Osipenko, Viresh Kumar).
* Extend the OPP API by adding new helpers to it (Dmitry Osipenko,
Viresh Kumar).
* Allow required OPPs to be used for devfreq devices and update
the devfreq governor code accordingly (Saravana Kannan).
* Prepare the framework for introducing new dev_pm_opp_set_opp()
helper (Viresh Kumar).
* Drop dev_pm_opp_set_bw() and update related drivers (Viresh
Kumar).
* Allow lazy linking of required-OPPs (Viresh Kumar).
- Simplify and clean up devfreq somewhat (Lukasz Luba, Yang Li,
Pierre Kuo).
- Update the generic power domains (genpd) framework:
* Use device's next wakeup to determine domain idle state (Lina
Iyer).
* Improve initialization and debug (Dmitry Osipenko).
* Simplify computations (Abaci Team).
- Make janitorial changes in the core code handling system sleep and
PM-runtime (Bhaskar Chowdhury, Bjorn Helgaas, Rikard Falkeborn,
Zqiang).
- Update the MAINTAINERS entry for the exynos cpuidle driver and drop
DEBUG definition from intel_idle (Krzysztof Kozlowski, Tom Rix).
- Extend the PM clock layer to cover clocks that must sleep (Nicolas
Pitre).
- Update the cpupower utility:
* Update cpupower command, add support for AMD family 0x19 and
clean up the code to remove many of the family checks to make
future family updates easier (Nathan Fontenot, Robert Richter).
* Add Makefile dependencies for install targets to allow building
cpupower in parallel rather than serially (Ivan Babrou).
- Make janitorial changes in power management Kconfig (Lukasz Luba)"
* tag 'pm-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (89 commits)
MAINTAINERS: cpuidle: exynos: include header in file pattern
powercap: intel_rapl: Use topology interface in rapl_init_domains()
powercap: intel_rapl: Use topology interface in rapl_add_package()
PM: sleep: Constify static struct attribute_group
PM: Kconfig: remove unneeded "default n" options
PM: EM: update Kconfig description and drop "default n" option
cpufreq: Remove unused flag CPUFREQ_PM_NO_WARN
cpufreq: Remove CPUFREQ_STICKY flag
PM / devfreq: Add required OPPs support to passive governor
PM / devfreq: Cache OPP table reference in devfreq
OPP: Add function to look up required OPP's for a given OPP
PM / devfreq: rk3399_dmc: Remove unneeded semicolon
opp: Replace ENOTSUPP with EOPNOTSUPP
opp: Fix "foo * bar" should be "foo *bar"
opp: Don't ignore clk_get() errors other than -ENOENT
opp: Update bandwidth requirements based on scaling up/down
opp: Allow lazy-linking of required-opps
opp: Remove dev_pm_opp_set_bw()
devfreq: tegra30: Migrate to dev_pm_opp_set_opp()
drm: msm: Migrate to dev_pm_opp_set_opp()
...
|
|
|
Josh Poimboeuf
|
73f44fe19d |
static_call: Allow module use without exposing static_call_key
When exporting static_call_key; with EXPORT_STATIC_CALL*(), the module can use static_call_update() to change the function called. This is not desirable in general. Not exporting static_call_key however also disallows usage of static_call(), since objtool needs the key to construct the static_call_site. Solve this by allowing objtool to create the static_call_site using the trampoline address when it builds a module and cannot find the static_call_key symbol. The module loader will then try and map the trampole back to a key before it constructs the normal sites list. Doing this requires a trampoline -> key associsation, so add another magic section that keeps those. Originally-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20210127231837.ifddpn7rhwdaepiu@treble |
|
|
Alexander Lobakin
|
fa07eca8d8 |
vmlinux.lds.h: catch more UBSAN symbols into .data
LKP triggered lots of LD orphan warnings [0]:
mipsel-linux-ld: warning: orphan section `.data.$Lubsan_data299' from
`init/do_mounts_rd.o' being placed in section `.data.$Lubsan_data299'
mipsel-linux-ld: warning: orphan section `.data.$Lubsan_data183' from
`init/do_mounts_rd.o' being placed in section `.data.$Lubsan_data183'
mipsel-linux-ld: warning: orphan section `.data.$Lubsan_type3' from
`init/do_mounts_rd.o' being placed in section `.data.$Lubsan_type3'
mipsel-linux-ld: warning: orphan section `.data.$Lubsan_type2' from
`init/do_mounts_rd.o' being placed in section `.data.$Lubsan_type2'
mipsel-linux-ld: warning: orphan section `.data.$Lubsan_type0' from
`init/do_mounts_rd.o' being placed in section `.data.$Lubsan_type0'
[...]
Seems like "unnamed data" isn't the only type of symbols that UBSAN
instrumentation can emit.
Catch these into .data with the wildcard as well.
[0] https://lore.kernel.org/linux-mm/202102160741.k57GCNSR-lkp@intel.com
Fixes:
|
|
|
Nick Desaulniers
|
3c4fa46b30 |
vmlinux.lds.h: add DWARF v5 sections
We expect toolchains to produce these new debug info sections as part of DWARF v5. Add explicit placements to prevent the linker warnings from --orphan-section=warn. Compilers may produce such sections with explicit -gdwarf-5, or based on the implicit default version of DWARF when -g is used via DEBUG_INFO. This implicit default changes over time, and has changed to DWARF v5 with GCC 11. .debug_sup was mentioned in review, but without compilers producing it today, let's wait to add it until it becomes necessary. Cc: stable@vger.kernel.org Link: https://bugzilla.redhat.com/show_bug.cgi?id=1922707 Reported-by: Chris Murphy <lists@colorremedies.com> Suggested-by: Fangrui Song <maskray@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Mark Wielaard <mark@klomp.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |
|
|
Fangrui Song
|
793f49a87a |
firmware_loader: align .builtin_fw to 8
arm64 references the start address of .builtin_fw (__start_builtin_fw)
with a pair of R_AARCH64_ADR_PREL_PG_HI21/R_AARCH64_LDST64_ABS_LO12_NC
relocations. The compiler is allowed to emit the
R_AARCH64_LDST64_ABS_LO12_NC relocation because struct builtin_fw in
include/linux/firmware.h is 8-byte aligned.
The R_AARCH64_LDST64_ABS_LO12_NC relocation requires the address to be a
multiple of 8, which may not be the case if .builtin_fw is empty.
Unconditionally align .builtin_fw to fix the linker error. 32-bit
architectures could use ALIGN(4) but that would add unnecessary
complexity, so just use ALIGN(8).
Link: https://lkml.kernel.org/r/20201208054646.2913063-1-maskray@google.com
Link: https://github.com/ClangBuiltLinux/linux/issues/1204
Fixes:
|
|
|
Christoph Hellwig
|
367948220f |
module: remove EXPORT_UNUSED_SYMBOL*
EXPORT_UNUSED_SYMBOL* is not actually used anywhere. Remove the unused functionality as we generally just remove unused code anyway. Reviewed-by: Miroslav Benes <mbenes@suse.cz> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jessica Yu <jeyu@kernel.org> |
|
|
Christoph Hellwig
|
f1c3d73e97 |
module: remove EXPORT_SYMBOL_GPL_FUTURE
As far as I can tell this has never been used at all, and certainly not any time recently. Reviewed-by: Miroslav Benes <mbenes@suse.cz> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jessica Yu <jeyu@kernel.org> |
|
|
Alexander Lobakin
|
f41b233de0 |
vmlinux.lds.h: catch UBSAN's "unnamed data" into data
When building kernel with both LD_DEAD_CODE_DATA_ELIMINATION and UBSAN, LLVM stack generates lots of "unnamed data" sections: ld.lld: warning: net/built-in.a(netfilter/utils.o): (.data.$__unnamed_2) is being placed in '.data.$__unnamed_2' ld.lld: warning: net/built-in.a(netfilter/utils.o): (.data.$__unnamed_3) is being placed in '.data.$__unnamed_3' ld.lld: warning: net/built-in.a(netfilter/utils.o): (.data.$__unnamed_4) is being placed in '.data.$__unnamed_4' ld.lld: warning: net/built-in.a(netfilter/utils.o): (.data.$__unnamed_5) is being placed in '.data.$__unnamed_5' [...] Also handle this by adding the related sections to generic definitions. Signed-off-by: Alexander Lobakin <alobakin@pm.me> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
|
|
Alexander Lobakin
|
9a427556fb |
vmlinux.lds.h: catch compound literals into data and BSS
When building kernel with LD_DEAD_CODE_DATA_ELIMINATION, LLVM stack generates separate sections for compound literals, just like in case with enabled LTO [0]: ld.lld: warning: drivers/built-in.a(mtd/nand/spi/gigadevice.o): (.data..compoundliteral.14) is being placed in '.data..compoundliteral.14' ld.lld: warning: drivers/built-in.a(mtd/nand/spi/gigadevice.o): (.data..compoundliteral.15) is being placed in '.data..compoundliteral.15' ld.lld: warning: drivers/built-in.a(mtd/nand/spi/gigadevice.o): (.data..compoundliteral.16) is being placed in '.data..compoundliteral.16' ld.lld: warning: drivers/built-in.a(mtd/nand/spi/gigadevice.o): (.data..compoundliteral.17) is being placed in '.data..compoundliteral.17' [...] Handle this by adding the related sections to generic definitions as suggested by Sami [0]. [0] https://lore.kernel.org/lkml/20201211184633.3213045-3-samitolvanen@google.com Suggested-by: Sami Tolvanen <samitolvanen@google.com> Suggested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Alexander Lobakin <alobakin@pm.me> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
|
|
Sami Tolvanen
|
dc5723b02e |
kbuild: add support for Clang LTO
This change adds build system support for Clang's Link Time Optimization (LTO). With -flto, instead of ELF object files, Clang produces LLVM bitcode, which is compiled into native code at link time, allowing the final binary to be optimized globally. For more details, see: https://llvm.org/docs/LinkTimeOptimization.html The Kconfig option CONFIG_LTO_CLANG is implemented as a choice, which defaults to LTO being disabled. To use LTO, the architecture must select ARCH_SUPPORTS_LTO_CLANG and support: - compiling with Clang, - compiling all assembly code with Clang's integrated assembler, - and linking with LLD. While using CONFIG_LTO_CLANG_FULL results in the best runtime performance, the compilation is not scalable in time or memory. CONFIG_LTO_CLANG_THIN enables ThinLTO, which allows parallel optimization and faster incremental builds. ThinLTO is used by default if the architecture also selects ARCH_SUPPORTS_LTO_CLANG_THIN: https://clang.llvm.org/docs/ThinLTO.html To enable LTO, LLVM tools must be used to handle bitcode files, by passing LLVM=1 and LLVM_IAS=1 options to make: $ make LLVM=1 LLVM_IAS=1 defconfig $ scripts/config -e LTO_CLANG_THIN $ make LLVM=1 LLVM_IAS=1 To prepare for LTO support with other compilers, common parts are gated behind the CONFIG_LTO option, and LTO can be disabled for specific files by filtering out CC_FLAGS_LTO. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20201211184633.3213045-3-samitolvanen@google.com |
|
|
Daniel Lezcano
|
a20d0ef97a |
powercap/drivers/dtpm: Add API for dynamic thermal power management
On the embedded world, the complexity of the SoC leads to an increasing number of hotspots which need to be monitored and mitigated as a whole in order to prevent the temperature to go above the normative and legally stated 'skin temperature'. Another aspect is to sustain the performance for a given power budget, for example virtual reality where the user can feel dizziness if the GPU performance is capped while a big CPU is processing something else. Or reduce the battery charging because the dissipated power is too high compared with the power consumed by other devices. The userspace is the most adequate place to dynamically act on the different devices by limiting their power given an application profile: it has the knowledge of the platform. These userspace daemons are in charge of the Dynamic Thermal Power Management (DTPM). Nowadays, the dtpm daemons are abusing the thermal framework as they act on the cooling device state to force a specific and arbitrary state without taking care of the governor decisions. Given the closed loop of some governors that can confuse the logic or directly enter in a decision conflict. As the number of cooling device support is limited today to the CPU and the GPU, the dtpm daemons have little control on the power dissipation of the system. The out of tree solutions are hacking around here and there in the drivers, in the frameworks to have control on the devices. The common solution is to declare them as cooling devices. There is no unification of the power limitation unit, opaque states are used. This patch provides a way to create a hierarchy of constraints using the powercap framework. The devices which are registered as power limit-able devices are represented in this hierarchy as a tree. They are linked together with intermediate nodes which are just there to propagate the constraint to the children. The leaves of the tree are the real devices, the intermediate nodes are virtual, aggregating the children constraints and power characteristics. Each node have a weight on a 2^10 basis, in order to reflect the percentage of power distribution of the children's node. This percentage is used to dispatch the power limit to the children. The weight is computed against the max power of the siblings. This simple approach allows to do a fair distribution of the power limit. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Kees Cook
|
3e6631485f |
vmlinux.lds.h: Keep .ctors.* with .ctors
Under some circumstances, the compiler generates .ctors.* sections. This
is seen doing a cross compile of x86_64 from a powerpc64el host:
x86_64-linux-gnu-ld: warning: orphan section `.ctors.65435' from `kernel/trace/trace_clock.o' being
placed in section `.ctors.65435'
x86_64-linux-gnu-ld: warning: orphan section `.ctors.65435' from `kernel/trace/ftrace.o' being
placed in section `.ctors.65435'
x86_64-linux-gnu-ld: warning: orphan section `.ctors.65435' from `kernel/trace/ring_buffer.o' being
placed in section `.ctors.65435'
Include these orphans along with the regular .ctors section.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes:
|
|
|
Linus Torvalds
|
7cf726a594 |
linux-kselftest-kunit-5.10-rc1
This Kunit update for Linux 5.10-rc1 consists of: - add Kunit to kernel_init() and remove KUnit from init calls entirely. This addresses the concern Kunit would not work correctly during late init phase. - add a linker section where KUnit can put references to its test suites. This patch is the first step in transitioning to dispatching all KUnit tests from a centralized executor rather than having each as its own separate late_initcall. - add a centralized executor to dispatch tests rather than relying on late_initcall to schedule each test suite separately. Centralized execution is for built-in tests only; modules will execute tests when loaded. - convert bitfield test to use KUnit framework - Documentation updates for naming guidelines and how kunit_test_suite() works. - add test plan to KUnit TAP format -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAl+Mr68ACgkQCwJExA0N Qxy7HxAAuToPP6uUHwTC3KzVVE4hjP9a3t4hiD7kP/gI0umN+2nrccm6Vx6E+r9t Jkjiv9Yxj3riOkE5jJ8KriAx228mwz3N1yBEDfpp+8iCWOK3iOuFKKTTWOoZY4hf Enlf7n4Yp2TOEmIH0xwh/H67zl0+3FwT3fGWC6DDPXHuw+X+mGphCl9XPB70rZcT q/s0dwx1CmWBm30MgFXN+SZ7CgLP13lRAvkVO4t56/O1SkTbpCe7U1zqT2p5UoOY x7qvzs3pdCaWbpCsAqFWr46iECDHuVQjIgLuddOF/OgWVcCZlv7T7ESd7IDPHUPx DD3zYG0ODV0jKZHmpwkSojSbu3z6v5FnfhLpAcaHoEMBeRu5UIar7EjPHwqrqiU7 JqE7dBECmcD308sr9u0w44DK15nmsD3+njrBQ/AJmsWdg0wtnMvA01nAHKObbk0n 33aIu4Iny1dH35/rt9dV2DKT09f5r0ANCjoJMX8gu/li66FHGfULOaqr6KLLqi5X VPgHCKzyT9nD+Bc2LYzRWmhhAj+5Iwyglgpe9ZiOlPQ5i+hLvfPPAZxVYSbVA1Sk aVZi+ibKUqHSBfXcaLf/OKX7Csf4zni3F+WfFT5ZIC4Y6iEF+0tvS2HW2/pcUAN/ OSPYYmyqhwYIl8tvbQENgBsyU/K1rECxJpqWAznJLRCebkY5a/s= =0Sco -----END PGP SIGNATURE----- Merge tag 'linux-kselftest-kunit-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull more Kunit updates from Shuah Khan: - add Kunit to kernel_init() and remove KUnit from init calls entirely. This addresses the concern that Kunit would not work correctly during late init phase. - add a linker section where KUnit can put references to its test suites. This is the first step in transitioning to dispatching all KUnit tests from a centralized executor rather than having each as its own separate late_initcall. - add a centralized executor to dispatch tests rather than relying on late_initcall to schedule each test suite separately. Centralized execution is for built-in tests only; modules will execute tests when loaded. - convert bitfield test to use KUnit framework - Documentation updates for naming guidelines and how kunit_test_suite() works. - add test plan to KUnit TAP format * tag 'linux-kselftest-kunit-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: lib: kunit: Fix compilation test when using TEST_BIT_FIELD_COMPILE lib: kunit: add bitfield test conversion to KUnit Documentation: kunit: add a brief blurb about kunit_test_suite kunit: test: add test plan to KUnit TAP format init: main: add KUnit to kernel init kunit: test: create a single centralized executor for all tests vmlinux.lds.h: add linker section for KUnit test suites Documentation: kunit: Add naming guidelines |
|
|
Linus Torvalds
|
dd502a8107 |
This tree introduces static_call(), which is the idea of static_branch()
applied to indirect function calls. Remove a data load (indirection) by
modifying the text.
They give the flexibility of function pointers, but with better
performance. (This is especially important for cases where
retpolines would otherwise be used, as retpolines can be pretty
slow.)
API overview:
DECLARE_STATIC_CALL(name, func);
DEFINE_STATIC_CALL(name, func);
DEFINE_STATIC_CALL_NULL(name, typename);
static_call(name)(args...);
static_call_cond(name)(args...);
static_call_update(name, func);
x86 is supported via text patching, otherwise basic indirect calls are used,
with function pointers.
There's a second variant using inline code patching, inspired by jump-labels,
implemented on x86 as well.
The new APIs are utilized in the x86 perf code, a heavy user of function pointers,
where static calls speed up the PMU handler by 4.2% (!).
The generic implementation is not really excercised on other architectures,
outside of the trivial test_static_call_init() self-test.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=JvpF
-----END PGP SIGNATURE-----
Merge tag 'core-static_call-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull static call support from Ingo Molnar:
"This introduces static_call(), which is the idea of static_branch()
applied to indirect function calls. Remove a data load (indirection)
by modifying the text.
They give the flexibility of function pointers, but with better
performance. (This is especially important for cases where retpolines
would otherwise be used, as retpolines can be pretty slow.)
API overview:
DECLARE_STATIC_CALL(name, func);
DEFINE_STATIC_CALL(name, func);
DEFINE_STATIC_CALL_NULL(name, typename);
static_call(name)(args...);
static_call_cond(name)(args...);
static_call_update(name, func);
x86 is supported via text patching, otherwise basic indirect calls are
used, with function pointers.
There's a second variant using inline code patching, inspired by
jump-labels, implemented on x86 as well.
The new APIs are utilized in the x86 perf code, a heavy user of
function pointers, where static calls speed up the PMU handler by
4.2% (!).
The generic implementation is not really excercised on other
architectures, outside of the trivial test_static_call_init()
self-test"
* tag 'core-static_call-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
static_call: Fix return type of static_call_init
tracepoint: Fix out of sync data passing by static caller
tracepoint: Fix overly long tracepoint names
x86/perf, static_call: Optimize x86_pmu methods
tracepoint: Optimize using static_call()
static_call: Allow early init
static_call: Add some validation
static_call: Handle tail-calls
static_call: Add static_call_cond()
x86/alternatives: Teach text_poke_bp() to emulate RET
static_call: Add simple self-test for static calls
x86/static_call: Add inline static call implementation for x86-64
x86/static_call: Add out-of-line static call implementation
static_call: Avoid kprobes on inline static_call()s
static_call: Add inline static call infrastructure
static_call: Add basic static call infrastructure
compiler.h: Make __ADDRESSABLE() symbol truly unique
jump_label,module: Fix module lifetime for __jump_label_mod_text_reserved()
module: Properly propagate MODULE_STATE_COMING failure
module: Fix up module_notifier return values
...
|
|
|
Linus Torvalds
|
34eb62d868 |
Orphan link sections were a long-standing source of obscure bugs,
because the heuristics that various linkers & compilers use to handle them (include these bits into the output image vs discarding them silently) are both highly idiosyncratic and also version dependent. Instead of this historically problematic mess, this tree by Kees Cook (et al) adds build time asserts and build time warnings if there's any orphan section in the kernel or if a section is not sized as expected. And because we relied on so many silent assumptions in this area, fix a metric ton of dependencies and some outright bugs related to this, before we can finally enable the checks on the x86, ARM and ARM64 platforms. Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl+Edv4RHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1hiKBAApdJEOaK7hMc3013DYNctklIxEPJL2mFJ 11YJRIh4pUJTF0TE+EHT/D+rSIuRsyuoSmOQBQ61/wVSnyG067GjjVJRqh/eYaJ1 fDhJi2FuHOjXl+CiN0KxzBjjp+V4NhF7jHT59tpQSvfZeg7FjteoxfztxaCp5ek3 S3wHB3CC4c4jE3lfjHem1E9/PwT4kwPYx1c3gAUdEqJdjkihjX9fWusfjLeqW6/d Y5VkApi6bL9XiZUZj5l0dEIweLJJ86+PkKJqpo3spxxEak1LSn1MEix+lcJ8e1Kg sb/bEEivDcmFlFWOJnn0QLquCR0Cx5bz1pwsL0tuf0yAd4+sXX5IMuGUysZlEdKM BHL9h5HbevGF4BScwZwZH7lyEg7q67s5KnRu4hxy0Swfcj7y0oT/9lXqpbpZ2DqO Hd+bRRQKIbqnTMp0hcit9LfpLp93vj0dBlaV5ocAJJlu62u9VnwGG5HQuZ5giLUr kA1SLw63Y1wopFRxgFyER8les7eLsu0zxHeK44rRVlVnfI99OMTOgVNicmDFy3Fm AfcnfJG0BqBEJGQz5es34uQQKKBwFPtC9NztopI62KiwOspYYZyrO1BNxdOc6DlS mIHrmO89HMXuid5eolvLaFqUWirHoWO8TlycgZxUWVHc2txVPjAEU/axouU/dSSU w/6GpzAa+7g= =fXAw -----END PGP SIGNATURE----- Merge tag 'core-build-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull orphan section checking from Ingo Molnar: "Orphan link sections were a long-standing source of obscure bugs, because the heuristics that various linkers & compilers use to handle them (include these bits into the output image vs discarding them silently) are both highly idiosyncratic and also version dependent. Instead of this historically problematic mess, this tree by Kees Cook (et al) adds build time asserts and build time warnings if there's any orphan section in the kernel or if a section is not sized as expected. And because we relied on so many silent assumptions in this area, fix a metric ton of dependencies and some outright bugs related to this, before we can finally enable the checks on the x86, ARM and ARM64 platforms" * tag 'core-build-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) x86/boot/compressed: Warn on orphan section placement x86/build: Warn on orphan section placement arm/boot: Warn on orphan section placement arm/build: Warn on orphan section placement arm64/build: Warn on orphan section placement x86/boot/compressed: Add missing debugging sections to output x86/boot/compressed: Remove, discard, or assert for unwanted sections x86/boot/compressed: Reorganize zero-size section asserts x86/build: Add asserts for unwanted sections x86/build: Enforce an empty .got.plt section x86/asm: Avoid generating unused kprobe sections arm/boot: Handle all sections explicitly arm/build: Assert for unwanted sections arm/build: Add missing sections arm/build: Explicitly keep .ARM.attributes sections arm/build: Refactor linker script headers arm64/build: Assert for unwanted sections arm64/build: Add missing DWARF sections arm64/build: Use common DISCARDS in linker script arm64/build: Remove .eh_frame* sections due to unwind tables ... |
|
|
Brendan Higgins
|
90a025a859 |
vmlinux.lds.h: add linker section for KUnit test suites
Add a linker section where KUnit can put references to its test suites. This patch is the first step in transitioning to dispatching all KUnit tests from a centralized executor rather than having each as its own separate late_initcall. Co-developed-by: Iurii Zaikin <yzaikin@google.com> Signed-off-by: Iurii Zaikin <yzaikin@google.com> Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
|
|
Tony Ambardar
|
65c2043989 |
bpf: Prevent .BTF section elimination
Systems with memory or disk constraints often reduce the kernel footprint
by configuring LD_DEAD_CODE_DATA_ELIMINATION. However, this can result in
removal of any BTF information.
Use the KEEP() macro to preserve the BTF data as done with other important
sections, while still allowing for smaller kernels.
Fixes:
|
|
|
Josh Poimboeuf
|
1e7e478838 |
x86/static_call: Add inline static call implementation for x86-64
Add the inline static call implementation for x86-64. The generated code is identical to the out-of-line case, except we move the trampoline into it's own section. Objtool uses the trampoline naming convention to detect all the call sites. It then annotates those call sites in the .static_call_sites section. During boot (and module init), the call sites are patched to call directly into the destination function. The temporary trampoline is then no longer used. [peterz: merged trampolines, put trampoline in section] Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20200818135804.864271425@infradead.org |
|
|
Josh Poimboeuf
|
9183c3f9ed |
static_call: Add inline static call infrastructure
Add infrastructure for an arch-specific CONFIG_HAVE_STATIC_CALL_INLINE option, which is a faster version of CONFIG_HAVE_STATIC_CALL. At runtime, the static call sites are patched directly, rather than using the out-of-line trampolines. Compared to out-of-line static calls, the performance benefits are more modest, but still measurable. Steven Rostedt did some tracepoint measurements: https://lkml.kernel.org/r/20181126155405.72b4f718@gandalf.local.home This code is heavily inspired by the jump label code (aka "static jumps"), as some of the concepts are very similar. For more details, see the comments in include/linux/static_call.h. [peterz: simplified interface; merged trampolines] Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20200818135804.684334440@infradead.org |
|
|
Nick Desaulniers
|
eff8728fe6 |
vmlinux.lds.h: Add PGO and AutoFDO input sections
Basically, consider .text.{hot|unlikely|unknown}.* part of .text, too.
When compiling with profiling information (collected via PGO
instrumentations or AutoFDO sampling), Clang will separate code into
.text.hot, .text.unlikely, or .text.unknown sections based on profiling
information. After D79600 (clang-11), these sections will have a
trailing `.` suffix, ie. .text.hot., .text.unlikely., .text.unknown..
When using -ffunction-sections together with profiling infomation,
either explicitly (FGKASLR) or implicitly (LTO), code may be placed in
sections following the convention:
.text.hot.<foo>, .text.unlikely.<bar>, .text.unknown.<baz>
where <foo>, <bar>, and <baz> are functions. (This produces one section
per function; we generally try to merge these all back via linker script
so that we don't have 50k sections).
For the above cases, we need to teach our linker scripts that such
sections might exist and that we'd explicitly like them grouped
together, otherwise we can wind up with code outside of the
_stext/_etext boundaries that might not be mapped properly for some
architectures, resulting in boot failures.
If the linker script is not told about possible input sections, then
where the section is placed as output is a heuristic-laiden mess that's
non-portable between linkers (ie. BFD and LLD), and has resulted in many
hard to debug bugs. Kees Cook is working on cleaning this up by adding
--orphan-handling=warn linker flag used in ARCH=powerpc to additional
architectures. In the case of linker scripts, borrowing from the Zen of
Python: explicit is better than implicit.
Also, ld.bfd's internal linker script considers .text.hot AND
.text.hot.* to be part of .text, as well as .text.unlikely and
.text.unlikely.*. I didn't see support for .text.unknown.*, and didn't
see Clang producing such code in our kernel builds, but I see code in
LLVM that can produce such section names if profiling information is
missing. That may point to a larger issue with generating or collecting
profiles, but I would much rather be safe and explicit than have to
debug yet another issue related to orphan section placement.
Reported-by: Jian Cai <jiancai@google.com>
Suggested-by: Fāng-ruì Sòng <maskray@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Luis Lozano <llozano@google.com>
Tested-by: Manoj Gupta <manojgupta@google.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: linux-arch@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commitdiff;h=add44f8d5c5c05e08b11e033127a744d61c26aee
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commitdiff;h=1de778ed23ce7492c523d5850c6c6dbb34152655
Link: https://reviews.llvm.org/D79600
Link: https://bugs.chromium.org/p/chromium/issues/detail?id=1084760
Link: https://lore.kernel.org/r/20200821194310.3089815-7-keescook@chromium.org
Debugged-by: Luis Lozano <llozano@google.com>
|
|
|
Kees Cook
|
a840c4de56 |
vmlinux.lds.h: Add .symtab, .strtab, and .shstrtab to ELF_DETAILS
When linking vmlinux with LLD, the synthetic sections .symtab, .strtab, and .shstrtab are listed as orphaned. Add them to the ELF_DETAILS section so there will be no warnings when --orphan-handling=warn is used more widely. (They are added above comment as it is the more common order[1].) ld.lld: warning: <internal>:(.symtab) is being placed in '.symtab' ld.lld: warning: <internal>:(.shstrtab) is being placed in '.shstrtab' ld.lld: warning: <internal>:(.strtab) is being placed in '.strtab' [1] https://lore.kernel.org/lkml/20200622224928.o2a7jkq33guxfci4@google.com/ Reported-by: Fangrui Song <maskray@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: linux-arch@vger.kernel.org Link: https://lore.kernel.org/r/20200821194310.3089815-6-keescook@chromium.org |
|
|
Kees Cook
|
c604abc3f6 |
vmlinux.lds.h: Split ELF_DETAILS from STABS_DEBUG
The .comment section doesn't belong in STABS_DEBUG. Split it out into a new macro named ELF_DETAILS. This will gain other non-debug sections that need to be accounted for when linking with --orphan-handling=warn. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: linux-arch@vger.kernel.org Link: https://lore.kernel.org/r/20200821194310.3089815-5-keescook@chromium.org |
|
|
Kees Cook
|
d812db7828 |
vmlinux.lds.h: Avoid KASAN and KCSAN's unwanted sections
KASAN (-fsanitize=kernel-address) and KCSAN (-fsanitize=thread) produce unwanted[1] .eh_frame and .init_array.* sections. Add them to COMMON_DISCARDS, except with CONFIG_CONSTRUCTORS, which wants to keep .init_array.* sections. [1] https://bugs.llvm.org/show_bug.cgi?id=46478 Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Marco Elver <elver@google.com> Cc: linux-arch@vger.kernel.org Link: https://lore.kernel.org/r/20200821194310.3089815-4-keescook@chromium.org |
|
|
Kees Cook
|
dfbe69689b |
vmlinux.lds.h: Add .gnu.version* to COMMON_DISCARDS
For vmlinux linking, no architecture uses the .gnu.version* sections, so remove it via the COMMON_DISCARDS macro in preparation for adding --orphan-handling=warn more widely. This is a work-around for what appears to be a bug[1] in ld.bfd which warns for this synthetic section even when none is found in input objects, and even when no section is emitted for an output object[2]. [1] https://sourceware.org/bugzilla/show_bug.cgi?id=26153 [2] https://lore.kernel.org/lkml/202006221524.CEB86E036B@keescook/ Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Fangrui Song <maskray@google.com> Cc: linux-arch@vger.kernel.org Link: https://lore.kernel.org/r/20200821194310.3089815-3-keescook@chromium.org |
|
|
Kees Cook
|
03c2b85cb7 |
vmlinux.lds.h: Create COMMON_DISCARDS
Collect the common DISCARD sections for architectures that need more specialized discard control than what the standard DISCARDS section provides. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: linux-arch@vger.kernel.org Link: https://lore.kernel.org/r/20200821194310.3089815-2-keescook@chromium.org |
|
|
Romain Naour
|
7f897acbe5 |
include/asm-generic/vmlinux.lds.h: align ro_after_init
Since the patch [1], building the kernel using a toolchain built with binutils 2.33.1 prevents booting a sh4 system under Qemu. Apply the patch provided by Alan Modra [2] that fix alignment of rodata. [1] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=ebd2263ba9a9124d93bbc0ece63d7e0fae89b40e [2] https://www.sourceware.org/ml/binutils/2019-12/msg00112.html Signed-off-by: Romain Naour <romain.naour@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alan Modra <amodra@gmail.com> Cc: Bin Meng <bin.meng@windriver.com> Cc: Chen Zhou <chenzhou10@huawei.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Rich Felker <dalias@libc.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Arnd Bergmann <arnd@arndb.de> Cc: <stable@vger.kernel.org> Link: https://marc.info/?l=linux-sh&m=158429470221261 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Linus Torvalds
|
47ec5303d7 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from David Miller:
1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.
2) Support UDP segmentation in code TSO code, from Eric Dumazet.
3) Allow flashing different flash images in cxgb4 driver, from Vishal
Kulkarni.
4) Add drop frames counter and flow status to tc flower offloading,
from Po Liu.
5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.
6) Various new indirect call avoidance, from Eric Dumazet and Brian
Vazquez.
7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
Yonghong Song.
8) Support querying and setting hardware address of a port function via
devlink, use this in mlx5, from Parav Pandit.
9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.
10) Switch qca8k driver over to phylink, from Jonathan McDowell.
11) In bpftool, show list of processes holding BPF FD references to
maps, programs, links, and btf objects. From Andrii Nakryiko.
12) Several conversions over to generic power management, from Vaibhav
Gupta.
13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
Yakunin.
14) Various https url conversions, from Alexander A. Klimov.
15) Timestamping and PHC support for mscc PHY driver, from Antoine
Tenart.
16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.
17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.
18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.
19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
drivers. From Luc Van Oostenryck.
20) XDP support for xen-netfront, from Denis Kirjanov.
21) Support receive buffer autotuning in MPTCP, from Florian Westphal.
22) Support EF100 chip in sfc driver, from Edward Cree.
23) Add XDP support to mvpp2 driver, from Matteo Croce.
24) Support MPTCP in sock_diag, from Paolo Abeni.
25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
infrastructure, from Jakub Kicinski.
26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.
27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.
28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.
29) Refactor a lot of networking socket option handling code in order to
avoid set_fs() calls, from Christoph Hellwig.
30) Add rfc4884 support to icmp code, from Willem de Bruijn.
31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.
32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.
33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.
34) Support TCP syncookies in MPTCP, from Flowian Westphal.
35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
Brivio.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
net: thunderx: initialize VF's mailbox mutex before first usage
usb: hso: remove bogus check for EINPROGRESS
usb: hso: no complaint about kmalloc failure
hso: fix bailout in error case of probe
ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
selftests/net: relax cpu affinity requirement in msg_zerocopy test
mptcp: be careful on subflow creation
selftests: rtnetlink: make kci_test_encap() return sub-test result
selftests: rtnetlink: correct the final return value for the test
net: dsa: sja1105: use detected device id instead of DT one on mismatch
tipc: set ub->ifindex for local ipv6 address
ipv6: add ipv6_dev_find()
net: openvswitch: silence suspicious RCU usage warning
Revert "vxlan: fix tos value before xmit"
ptp: only allow phase values lower than 1 period
farsync: switch from 'pci_' to 'dma_' API
wan: wanxl: switch from 'pci_' to 'dma_' API
hv_netvsc: do not use VF device if link is down
dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
net: macb: Properly handle phylink on at91sam9x
...
|
|
|
Linus Torvalds
|
1785d11612 |
Char/Misc driver patches for 5.9-rc1
Here is the large set of char and misc and other driver subsystem patches for 5.9-rc1. Lots of new driver submissions in here, and cleanups and features for existing drivers. Highlights are: - habanalabs driver updates - coresight driver updates - nvmem driver updates - huge number of "W=1" build warning cleanups from Lee Jones - dyndbg updates - virtbox driver fixes and updates - soundwire driver updates - mei driver updates - phy driver updates - fpga driver updates - lots of smaller individual misc/char driver cleanups and fixes Full details are in the shortlog. All of these have been in linux-next with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXylccQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymofgCfZ1CxNWd0ZVM0YIn8cY9gO6ON7MsAnRq48hvn Vjf4rKM73GC11bVF4Gyy =Xq1R -----END PGP SIGNATURE----- Merge tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the large set of char and misc and other driver subsystem patches for 5.9-rc1. Lots of new driver submissions in here, and cleanups and features for existing drivers. Highlights are: - habanalabs driver updates - coresight driver updates - nvmem driver updates - huge number of "W=1" build warning cleanups from Lee Jones - dyndbg updates - virtbox driver fixes and updates - soundwire driver updates - mei driver updates - phy driver updates - fpga driver updates - lots of smaller individual misc/char driver cleanups and fixes Full details are in the shortlog. All of these have been in linux-next with no reported issues" * tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (322 commits) habanalabs: remove unused but set variable 'ctx_asid' nvmem: qcom-spmi-sdam: Enable multiple devices dt-bindings: nvmem: SID: add binding for A100's SID controller nvmem: update Kconfig description nvmem: qfprom: Add fuse blowing support dt-bindings: nvmem: Add properties needed for blowing fuses dt-bindings: nvmem: qfprom: Convert to yaml nvmem: qfprom: use NVMEM_DEVID_AUTO for multiple instances nvmem: core: add support to auto devid nvmem: core: Add nvmem_cell_read_u8() nvmem: core: Grammar fixes for help text nvmem: sc27xx: add sc2730 efuse support nvmem: Enforce nvmem stride in the sysfs interface MAINTAINERS: Add git tree for NVMEM FRAMEWORK nvmem: sprd: Fix return value of sprd_efuse_probe() drivers: android: Fix the SPDX comment style drivers: android: Fix a variable declaration coding style issue drivers: android: Remove braces for a single statement if-else block drivers: android: Remove the use of else after return drivers: android: Fix a variable declaration coding style issue ... |
|
|
Linus Torvalds
|
e4cbce4d13 |
The main changes in this cycle were:
- Improve uclamp performance by using a static key for the fast path
- Add the "sched_util_clamp_min_rt_default" sysctl, to optimize for
better power efficiency of RT tasks on battery powered devices.
(The default is to maximize performance & reduce RT latencies.)
- Improve utime and stime tracking accuracy, which had a fixed boundary
of error, which created larger and larger relative errors as the values
become larger. This is now replaced with more precise arithmetics,
using the new mul_u64_u64_div_u64() helper in math64.h.
- Improve the deadline scheduler, such as making it capacity aware
- Improve frequency-invariant scheduling
- Misc cleanups in energy/power aware scheduling
- Add sched_update_nr_running tracepoint to track changes to nr_running
- Documentation additions and updates
- Misc cleanups and smaller fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=PbO7
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Improve uclamp performance by using a static key for the fast path
- Add the "sched_util_clamp_min_rt_default" sysctl, to optimize for
better power efficiency of RT tasks on battery powered devices.
(The default is to maximize performance & reduce RT latencies.)
- Improve utime and stime tracking accuracy, which had a fixed boundary
of error, which created larger and larger relative errors as the
values become larger. This is now replaced with more precise
arithmetics, using the new mul_u64_u64_div_u64() helper in math64.h.
- Improve the deadline scheduler, such as making it capacity aware
- Improve frequency-invariant scheduling
- Misc cleanups in energy/power aware scheduling
- Add sched_update_nr_running tracepoint to track changes to nr_running
- Documentation additions and updates
- Misc cleanups and smaller fixes
* tag 'sched-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
sched/doc: Factorize bits between sched-energy.rst & sched-capacity.rst
sched/doc: Document capacity aware scheduling
sched: Document arch_scale_*_capacity()
arm, arm64: Fix selection of CONFIG_SCHED_THERMAL_PRESSURE
Documentation/sysctl: Document uclamp sysctl knobs
sched/uclamp: Add a new sysctl to control RT default boost value
sched/uclamp: Fix a deadlock when enabling uclamp static key
sched: Remove duplicated tick_nohz_full_enabled() check
sched: Fix a typo in a comment
sched/uclamp: Remove unnecessary mutex_init()
arm, arm64: Select CONFIG_SCHED_THERMAL_PRESSURE
sched: Cleanup SCHED_THERMAL_PRESSURE kconfig entry
arch_topology, sched/core: Cleanup thermal pressure definition
trace/events/sched.h: fix duplicated word
linux/sched/mm.h: drop duplicated words in comments
smp: Fix a potential usage of stale nr_cpus
sched/fair: update_pick_idlest() Select group with lowest group_util when idle_cpus are equal
sched: nohz: stop passing around unused "ticks" parameter.
sched: Better document ttwu()
sched: Add a tracepoint to track rq->nr_running
...
|
|
|
Greg Kroah-Hartman
|
65a9bde6ed |
Linux 5.8-rc7
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8d8h4eHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGd0sH/2iktYhMwPxzzpnb eI3OuTX/mRn4vUFOfpx9dmGVleMfKkpbvnn3IY7wA62Qfv7J7lkFRa1Bd1DlqXfW yyGTGDSKG5chiRCOU3s9ni92M4xIzFlrojyt/dIK2lUGMzUPI9FGlZRGQLKqqwLh 2syOXRWbcQ7e52IHtDSy3YBNveKRsP4NyqV+GxGiex18SMB/M3Pw9EMH614eDPsE QAGQi5uGv4hPJtFHgXgUyBPLFHIyFAiVxhFRIj7u2DSEKY79+wO1CGWFiFvdTY4B CbqKXLffY3iQdFsLJkj9Dl8cnOQnoY44V0EBzhhORxeOp71StUVaRwQMFa5tp48G 171s5Hs= =BQIl -----END PGP SIGNATURE----- Merge 5.8-rc7 into char-misc-next This should resolve the merge/build issues reported when trying to create linux-next. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
David S. Miller
|
a57066b1a0 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
The UDP reuseport conflict was a little bit tricky.
The net-next code, via bpf-next, extracted the reuseport handling
into a helper so that the BPF sk lookup code could invoke it.
At the same time, the logic for reuseport handling of unconnected
sockets changed via commit
|
|
|
Jim Cromie
|
e5ebffe18e |
dyndbg: rename __verbose section to __dyndbg
dyndbg populates its callsite info into __verbose section, change that to a more specific and descriptive name, __dyndbg. Also, per checkpatch: simplify __attribute(..) to __section(__dyndbg) declaration. and 1 spelling fix, decriptor Acked-by: <jbaron@akamai.com> Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20200719231058.1586423-6-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Joerg Roedel
|
de2b41be8f |
x86, vmlinux.lds: Page-align end of ..page_aligned sections
On x86-32 the idt_table with 256 entries needs only 2048 bytes. It is page-aligned, but the end of the .bss..page_aligned section is not guaranteed to be page-aligned. As a result, objects from other .bss sections may end up on the same 4k page as the idt_table, and will accidentially get mapped read-only during boot, causing unexpected page-faults when the kernel writes to them. This could be worked around by making the objects in the page aligned sections page sized, but that's wrong. Explicit sections which store only page aligned objects have an implicit guarantee that the object is alone in the page in which it is placed. That works for all objects except the last one. That's inconsistent. Enforcing page sized objects for these sections would wreckage memory sanitizers, because the object becomes artificially larger than it should be and out of bound access becomes legit. Align the end of the .bss..page_aligned and .data..page_aligned section on page-size so all objects places in these sections are guaranteed to have their own page. [ tglx: Amended changelog ] Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200721093448.10417-1-joro@8bytes.org |
|
|
Jiri Olsa
|
5a2798ab32 |
bpf: Add BTF_ID_LIST/BTF_ID/BTF_ID_UNUSED macros
Adding support to generate .BTF_ids section that will hold BTF ID lists for verifier. Adding macros that will help to define lists of BTF ID values placed in .BTF_ids section. They are initially filled with zeros (during compilation) and resolved later during the linking phase by resolve_btfids tool. Following defines list of one BTF ID value: BTF_ID_LIST(bpf_skb_output_btf_ids) BTF_ID(struct, sk_buff) It also defines following variable to access the list: extern u32 bpf_skb_output_btf_ids[]; The BTF_ID_UNUSED macro defines 4 zero bytes. It's used when we want to define 'unused' entry in BTF_ID_LIST, like: BTF_ID_LIST(bpf_skb_output_btf_ids) BTF_ID(struct, sk_buff) BTF_ID_UNUSED BTF_ID(struct, task_struct) Suggested-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200711215329.41165-4-jolsa@kernel.org |
|
|
Peter Zijlstra
|
85c2ce9104 |
sched, vmlinux.lds: Increase STRUCT_ALIGNMENT to 64 bytes for GCC-4.9
For some mysterious reason GCC-4.9 has a 64 byte section alignment for
structures, all other GCC versions (and Clang) tested (including 4.8
and 5.0) are fine with the 32 bytes alignment.
Getting this right is important for the new SCHED_DATA macro that
creates an explicitly ordered array of 'struct sched_class' in the
linker script and expect pointer arithmetic to work.
Fixes:
|
|
|
Steven Rostedt (VMware)
|
c3a340f7e7 |
sched: Have sched_class_highest define by vmlinux.lds.h
Now that the sched_class descriptors are defined by the linker script, and this needs to be aware of the existance of stop_sched_class when SMP is enabled or not, as it is used as the "highest" priority when defined. Move the declaration of sched_class_highest to the same location in the linker script that inserts stop_sched_class, and this will also make it easier to see what should be defined as the highest class, as this linker script location defines the priorities as well. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20191219214558.682913590@goodmis.org |
|
|
Steven Rostedt (VMware)
|
590d697963 |
sched: Force the address order of each sched class descriptor
In order to make a micro optimization in pick_next_task(), the order of the sched class descriptor address must be in the same order as their priority to each other. That is: &idle_sched_class < &fair_sched_class < &rt_sched_class < &dl_sched_class < &stop_sched_class In order to guarantee this order of the sched class descriptors, add each one into their own data section and force the order in the linker script. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/157675913272.349305.8936736338884044103.stgit@localhost.localdomain |
|
|
Thomas Gleixner
|
6553896666 |
vmlinux.lds.h: Create section for protection against instrumentation
Some code pathes, especially the low level entry code, must be protected against instrumentation for various reasons: - Low level entry code can be a fragile beast, especially on x86. - With NO_HZ_FULL RCU state needs to be established before using it. Having a dedicated section for such code allows to validate with tooling that no unsafe functions are invoked. Add the .noinstr.text section and the noinstr attribute to mark functions. noinstr implies notrace. Kprobes will gain a section check later. Provide also a set of markers: instrumentation_begin()/end() These are used to mark code inside a noinstr function which calls into regular instrumentable text section as safe. The instrumentation markers are only active when CONFIG_DEBUG_ENTRY is enabled as the end marker emits a NOP to prevent the compiler from merging the annotation points. This means the objtool verification requires a kernel compiled with this option. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200505134100.075416272@linutronix.de |
|
|
Linus Torvalds
|
29d9f30d4c |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from David Miller:
"Highlights:
1) Fix the iwlwifi regression, from Johannes Berg.
2) Support BSS coloring and 802.11 encapsulation offloading in
hardware, from John Crispin.
3) Fix some potential Spectre issues in qtnfmac, from Sergey
Matyukevich.
4) Add TTL decrement action to openvswitch, from Matteo Croce.
5) Allow paralleization through flow_action setup by not taking the
RTNL mutex, from Vlad Buslov.
6) A lot of zero-length array to flexible-array conversions, from
Gustavo A. R. Silva.
7) Align XDP statistics names across several drivers for consistency,
from Lorenzo Bianconi.
8) Add various pieces of infrastructure for offloading conntrack, and
make use of it in mlx5 driver, from Paul Blakey.
9) Allow using listening sockets in BPF sockmap, from Jakub Sitnicki.
10) Lots of parallelization improvements during configuration changes
in mlxsw driver, from Ido Schimmel.
11) Add support to devlink for generic packet traps, which report
packets dropped during ACL processing. And use them in mlxsw
driver. From Jiri Pirko.
12) Support bcmgenet on ACPI, from Jeremy Linton.
13) Make BPF compatible with RT, from Thomas Gleixnet, Alexei
Starovoitov, and your's truly.
14) Support XDP meta-data in virtio_net, from Yuya Kusakabe.
15) Fix sysfs permissions when network devices change namespaces, from
Christian Brauner.
16) Add a flags element to ethtool_ops so that drivers can more simply
indicate which coalescing parameters they actually support, and
therefore the generic layer can validate the user's ethtool
request. Use this in all drivers, from Jakub Kicinski.
17) Offload FIFO qdisc in mlxsw, from Petr Machata.
18) Support UDP sockets in sockmap, from Lorenz Bauer.
19) Fix stretch ACK bugs in several TCP congestion control modules,
from Pengcheng Yang.
20) Support virtual functiosn in octeontx2 driver, from Tomasz
Duszynski.
21) Add region operations for devlink and use it in ice driver to dump
NVM contents, from Jacob Keller.
22) Add support for hw offload of MACSEC, from Antoine Tenart.
23) Add support for BPF programs that can be attached to LSM hooks,
from KP Singh.
24) Support for multiple paths, path managers, and counters in MPTCP.
From Peter Krystad, Paolo Abeni, Florian Westphal, Davide Caratti,
and others.
25) More progress on adding the netlink interface to ethtool, from
Michal Kubecek"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2121 commits)
net: ipv6: rpl_iptunnel: Fix potential memory leak in rpl_do_srh_inline
cxgb4/chcr: nic-tls stats in ethtool
net: dsa: fix oops while probing Marvell DSA switches
net/bpfilter: remove superfluous testing message
net: macb: Fix handling of fixed-link node
net: dsa: ksz: Select KSZ protocol tag
netdevsim: dev: Fix memory leak in nsim_dev_take_snapshot_write
net: stmmac: add EHL 2.5Gbps PCI info and PCI ID
net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID
net: stmmac: create dwmac-intel.c to contain all Intel platform
net: dsa: bcm_sf2: Support specifying VLAN tag egress rule
net: dsa: bcm_sf2: Add support for matching VLAN TCI
net: dsa: bcm_sf2: Move writing of CFP_DATA(5) into slicing functions
net: dsa: bcm_sf2: Check earlier for FLOW_EXT and FLOW_MAC_EXT
net: dsa: bcm_sf2: Disable learning for ASP port
net: dsa: b53: Deny enslaving port 7 for 7278 into a bridge
net: dsa: b53: Prevent tagged VLAN on port 7 for 7278
net: dsa: b53: Restore VLAN entries upon (re)configuration
net: dsa: bcm_sf2: Fix overflow checks
hv_netvsc: Remove unnecessary round_up for recv_completion_cnt
...
|
|
|
H.J. Lu
|
84d5f77fc2 |
x86, vmlinux.lds: Add RUNTIME_DISCARD_EXIT to generic DISCARDS
In the x86 kernel, .exit.text and .exit.data sections are discarded at runtime, not by the linker. Add RUNTIME_DISCARD_EXIT to generic DISCARDS and define it in the x86 kernel linker script to keep them. The sections are added before the DISCARD directive so document here only the situation explicitly as this change doesn't have any effect on the generated kernel. Also, other architectures like ARM64 will use it too so generalize the approach with the RUNTIME_DISCARD_EXIT define. [ bp: Massage and extend commit message. ] Signed-off-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lkml.kernel.org/r/20200326193021.255002-1-hjl.tools@gmail.com |