Commit Graph

809735 Commits

Author SHA1 Message Date
Chuck Lever ba69cd122e xprtrdma: Remove support for FMR memory registration
FMR is not supported on most recent RDMA devices. It is also less
secure than FRWR because an FMR memory registration can expose
adjacent bytes to remote reading or writing. As discussed during the
RDMA BoF at LPC 2018, it is time to remove support for FMR in the
NFS/RDMA client stack.

Note that NFS/RDMA server-side uses either local memory registration
or FRWR. FMR is not used.

There are a few Infiniband/RoCE devices in the kernel tree that do
not appear to support MEM_MGT_EXTENSIONS (FRWR), and therefore will
not support client-side NFS/RDMA after this patch. These are:

 - mthca
 - qib
 - hns (RoCE)

Users of these devices can use NFS/TCP on IPoIB instead.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02 12:05:17 -05:00
Chuck Lever a78868497c xprtrdma: Reduce max_frwr_depth
Some devices advertise a large max_fast_reg_page_list_len
capability, but perform optimally when MRs are significantly smaller
than that depth -- probably when the MR itself is no larger than a
page.

By default, the RDMA R/W core API uses max_sge_rd as the maximum
page depth for MRs. For some devices, the value of max_sge_rd is
1, which is also not optimal. Thus, when max_sge_rd is larger than
1, use that value. Otherwise use the value of the
max_fast_reg_page_list_len attribute.

I've tested this with CX-3 Pro, FastLinq, and CX-5 devices. It
reproducibly improves the throughput of large I/Os by several
percent.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02 12:05:17 -05:00
Chuck Lever 6946f82380 xprtrdma: Fix ri_max_segs and the result of ro_maxpages
With certain combinations of krb5i/p, MR size, and r/wsize, I/O can
fail with EMSGSIZE. This is because the calculated value of
ri_max_segs (the max number of MRs per RPC) exceeded
RPCRDMA_MAX_HDR_SEGS, which caused Read or Write list encoding to
walk off the end of the transport header.

Once that was addressed, the ro_maxpages result has to be corrected
to account for the number of MRs needed for Reply chunks, which is
2 MRs smaller than a normal Read or Write chunk.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02 12:05:16 -05:00
Chuck Lever 0c0829bcf5 xprtrdma: Don't wake pending tasks until disconnect is done
Transport disconnect processing does a "wake pending tasks" at
various points.

Suppose an RPC Reply is being processed. The RPC task that Reply
goes with is waiting on the pending queue. If a disconnect wake-up
happens before reply processing is done, that reply, even if it is
good, is thrown away, and the RPC has to be sent again.

This window apparently does not exist for socket transports because
there is a lock held while a reply is being received which prevents
the wake-up call until after reply processing is done.

To resolve this, all RPC replies being processed on an RPC-over-RDMA
transport have to complete before pending tasks are awoken due to a
transport disconnect.

Callers that already hold the transport write lock may invoke
->ops->close directly. Others use a generic helper that schedules
a close when the write lock can be taken safely.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02 12:05:16 -05:00
Chuck Lever 3d433ad812 xprtrdma: No qp_event disconnect
After thinking about this more, and auditing other kernel ULP imple-
mentations, I believe that a DISCONNECT cm_event will occur after a
fatal QP event. If that's the case, there's no need for an explicit
disconnect in the QP event handler.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02 12:05:16 -05:00
Chuck Lever 6d2d0ee27c xprtrdma: Replace rpcrdma_receive_wq with a per-xprt workqueue
To address a connection-close ordering problem, we need the ability
to drain the RPC completions running on rpcrdma_receive_wq for just
one transport. Give each transport its own RPC completion workqueue,
and drain that workqueue when disconnecting the transport.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02 12:05:16 -05:00
Chuck Lever 6ceea36890 xprtrdma: Refactor Receive accounting
Clean up: Divide the work cleanly:

- rpcrdma_wc_receive is responsible only for RDMA Receives
- rpcrdma_reply_handler is responsible only for RPC Replies
- the posted send and receive counts both belong in rpcrdma_ep

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02 12:05:16 -05:00
Chuck Lever b674c4b4a1 xprtrdma: Ensure MRs are DMA-unmapped when posting LOCAL_INV fails
The recovery case in frwr_op_unmap_sync needs to DMA unmap each MR.
frwr_release_mr does not DMA-unmap, but the recycle worker does.

Fixes: 61da886bf7 ("xprtrdma: Explicitly resetting MRs is ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02 12:05:16 -05:00
Chuck Lever e2f34e2671 xprtrdma: Yet another double DMA-unmap
While chasing yet another set of DMAR fault reports, I noticed that
the frwr recycler conflates whether or not an MR has been DMA
unmapped with frwr->fr_state. Actually the two have only an indirect
relationship. It's in fact impossible to guess reliably whether the
MR has been DMA unmapped based on its fr_state field, especially as
the surrounding code and its assumptions have changed over time.

A better approach is to track the DMA mapping status explicitly so
that the recycler is less brittle to unexpected situations, and
attempts to DMA-unmap a second time are prevented.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org # v4.20
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02 12:05:16 -05:00
Linus Torvalds 8e143b90e4 IOMMU Updates for Linux v4.21
Including (in no particular order):
 
 	- Page table code for AMD IOMMU now supports large pages where
 	  smaller page-sizes were mapped before. VFIO had to work around
 	  that in the past and I included a patch to remove it (acked by
 	  Alex Williamson)
 
 	- Patches to unmodularize a couple of IOMMU drivers that would
 	  never work as modules anyway.
 
 	- Work to unify the the iommu-related pointers in
 	  'struct device' into one pointer. This work is not finished
 	  yet, but will probably be in the next cycle.
 
 	- NUMA aware allocation in iommu-dma code
 
 	- Support for r8a774a1 and r8a774c0 in the Renesas IOMMU driver
 
 	- Scalable mode support for the Intel VT-d driver
 
 	- PM runtime improvements for the ARM-SMMU driver
 
 	- Support for the QCOM-SMMUv2 IOMMU hardware from Qualcom
 
 	- Various smaller fixes and improvements
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJcKkEoAAoJECvwRC2XARrjCCoQAJxsgaAF5Z0s7z8j2A9SkaGp
 SIMnUAI5mDOdyhTOAI+eehpRzg5UVYt/JjFYnHz8HWqbSc8YOvDvHafmhMFIwYvO
 hq5knbs6ns2jJNFO+M4dioDq+3THdqkGIF5xoHdGTP7cn9+XyQ8lAoHo0RuL122U
 PJGqX7Cp4XnFP4HMb3uQYhVeBV7mU+XqAdB+4aDnQkzI5LkQCRr74GcqOm+Rlnyc
 cmQWc2arUMjgc1TJIrex8dx9dT6lq8kOmhyEg/IjHeGaZyJ3HqA+30XDDLEExN0G
 MeVawuxJz40HgXlkXr+iZTQtIFYkXdKvJH6rptMbOfbDeDz+YZ01TbtAMMH9o4jX
 yxjjMjdcWTsWYQ/MHHdsoMP34cajCi/EYPMNksbycw+E3Y+X/bSReCoWC0HUK8/+
 Z4TpZ9mZVygtJR+QNZ+pE9oiJpb4sroM10zTnbMoVHNnvfsO01FYk7FMPkolSKLw
 zB4MDswQYgchoFR9Z4ZB4PycYTzeafLKYgDPDoD1vIJgDavuidwvDWDRTDc+aMWM
 siIIewq19To9jDJkVjX4dsT/p99KVKgAR/Ps6jjWkAroha7g6GcmlYZHIJnyop04
 jiaSXUsk8aRucP/CRz5xdMmaGoN7BsNmpUjcrquc6Povk/6gvXvpY04oCs1+gNMX
 ipL9E3GTFCVBubRFrksv
 =DT9A
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:

 - Page table code for AMD IOMMU now supports large pages where smaller
   page-sizes were mapped before. VFIO had to work around that in the
   past and I included a patch to remove it (acked by Alex Williamson)

 - Patches to unmodularize a couple of IOMMU drivers that would never
   work as modules anyway.

 - Work to unify the the iommu-related pointers in 'struct device' into
   one pointer. This work is not finished yet, but will probably be in
   the next cycle.

 - NUMA aware allocation in iommu-dma code

 - Support for r8a774a1 and r8a774c0 in the Renesas IOMMU driver

 - Scalable mode support for the Intel VT-d driver

 - PM runtime improvements for the ARM-SMMU driver

 - Support for the QCOM-SMMUv2 IOMMU hardware from Qualcom

 - Various smaller fixes and improvements

* tag 'iommu-updates-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (78 commits)
  iommu: Check for iommu_ops == NULL in iommu_probe_device()
  ACPI/IORT: Don't call iommu_ops->add_device directly
  iommu/of: Don't call iommu_ops->add_device directly
  iommu: Consolitate ->add/remove_device() calls
  iommu/sysfs: Rename iommu_release_device()
  dmaengine: sh: rcar-dmac: Use device_iommu_mapped()
  xhci: Use device_iommu_mapped()
  powerpc/iommu: Use device_iommu_mapped()
  ACPI/IORT: Use device_iommu_mapped()
  iommu/of: Use device_iommu_mapped()
  driver core: Introduce device_iommu_mapped() function
  iommu/tegra: Use helper functions to access dev->iommu_fwspec
  iommu/qcom: Use helper functions to access dev->iommu_fwspec
  iommu/of: Use helper functions to access dev->iommu_fwspec
  iommu/mediatek: Use helper functions to access dev->iommu_fwspec
  iommu/ipmmu-vmsa: Use helper functions to access dev->iommu_fwspec
  iommu/dma: Use helper functions to access dev->iommu_fwspec
  iommu/arm-smmu: Use helper functions to access dev->iommu_fwspec
  ACPI/IORT: Use helper functions to access dev->iommu_fwspec
  iommu: Introduce wrappers around dev->iommu_fwspec
  ...
2019-01-01 15:55:29 -08:00
Linus Torvalds 78e8696c23 dmaengine-4.21-rc1
dmaengine updates for v4.21-rc1
 
  - New driver for UniPhier MIO DMA controller
  - Remove R-Mobile APE6 support
  - Sprd driver updates and support for cyclic link-list
  - Remove dma_slave_config direction usage from rest of drivers
  - Minor updates to dmatest, dw-dmac, zynqmp and bcm dma drivers
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcKipaAAoJEHwUBw8lI4NH87kQAJF5tSQzvh4alAwntJ+rNZfw
 bgiUW29f7PxEzEGDsTBuFsw9zPhGxPnwtXzLm2iSDBGqkEcwKc+yretuX3Pgkce+
 IpPkCBGcfXptSJxFz4XxBi3HCkZ+jlhy33pH+hkW/tA4SIcA+VJjfQLePiY3sVMO
 1QUFDaL9NEyEfgJTmUShaPvCiz+3OHjY/3LAMlbLqQer4C9zC3iyvZIf9lvPQQnt
 qJaFuEiqlhw6eOAGw+2frMYDEV57QEiRgghBZyFm5RxG19XCcPkVV9id22rz5TQb
 +mQXhyaLvDiztWf71dFlXW2nW8mjewcjNU4h5g3RTyLA7fpLNcpMyZY2WizIADVS
 x6a7/HSrDjD4CN6pGDmRi8vvqkTAEDCsrfUM6K43rAsoZzU5elVJwOv4m8WB3CCF
 pRlUwFi6ENt8Ov8CWgCCaY0/Bzj1FgjN3BY87amBsI9wF4fkpCPNdWw34a6lg1Kf
 SzyPty8Z+i+6rtKps7Mh9VOZI2tryPJzyAWrcOCDWQoiR/RWzgC3y6SuwCdiyaDf
 8hFV4xnB0oVJ8vsTjF1AgxVwEsqQ7TVTIsLAns6jEnTC5FAnOLd0iwh56a+rw+lR
 7e1iuQYllZ1rdMi+r5gWG4OCsZehmZgCqc250om51tzA1SDVDQ3bbx8clxZeha80
 AKr5MVrIVp7riYFEICvp
 =+pTt
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-4.21-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:
 "This includes a new driver, removes R-Mobile APE6 as it is no longer
  used, sprd cyclic dma support, last batch of dma_slave_config
  direction removal and random updates to bunch of drivers.

  Summary:
   - New driver for UniPhier MIO DMA controller
   - Remove R-Mobile APE6 support
   - Sprd driver updates and support for cyclic link-list
   - Remove dma_slave_config direction usage from rest of drivers
   - Minor updates to dmatest, dw-dmac, zynqmp and bcm dma drivers"

* tag 'dmaengine-4.21-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (48 commits)
  dmaengine: qcom_hidma: convert to DEFINE_SHOW_ATTRIBUTE
  dmaengine: pxa: remove DBGFS_FUNC_DECL()
  dmaengine: mic_x100_dma: convert to DEFINE_SHOW_ATTRIBUTE
  dmaengine: amba-pl08x: convert to DEFINE_SHOW_ATTRIBUTE
  dmaengine: Documentation: Add documentation for multi chan testing
  dmaengine: dmatest: Add transfer_size parameter
  dmaengine: dmatest: Add alignment parameter
  dmaengine: dmatest: Use fixed point div to calculate iops
  dmaengine: dmatest: Add support for multi channel testing
  dmaengine: rcar-dmac: Document R8A774C0 bindings
  dt-bindings: dmaengine: usb-dmac: Add binding for r8a774c0
  dmaengine: zynqmp_dma: replace spin_lock_bh with spin_lock_irqsave
  dmaengine: sprd: Add me as one of the module authors
  dmaengine: sprd: Support DMA 2-stage transfer mode
  dmaengine: sprd: Support DMA link-list cyclic callback
  dmaengine: sprd: Set cur_desc as NULL when free or terminate one dma channel
  dmaengine: sprd: Fix the last link-list configuration
  dmaengine: sprd: Get transfer residue depending on the transfer direction
  dmaengine: sprd: Remove direction usage from struct dma_slave_config
  dmaengine: dmatest: fix a small memory leak in dmatest_func()
  ...
2019-01-01 15:45:48 -08:00
Linus Torvalds fcf010449e kgdb patches for 4.20-rc1
Mostly clean ups although whilst Doug's was chasing down a odd
 lockdep warning he also did some work to improved debugger resilience
 when some CPUs fail to respond to the round up request.
 
 The main changes are:
 
  * Fixing a lockdep warning on architectures that cannot use an NMI for
    the round up plus related changes to make CPU round up and all CPU
    backtrace more resilient.
 
  * Constify the arch ops tables
 
  * A couple of other small clean ups
 
 Two of the three patchsets here include changes that spill over into
 arch/.  Changes in the arch space are relatively narrow in scope
 (and directly related to kgdb). Didn't get comprehensive acks but
 all impacted maintainers were Cc:ed in good time.
 
 Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJPBAABCAA5FiEELzVBU1D3lWq6cKzwfOMlXTn3iKEFAlwonoUbHGRhbmllbC50
 aG9tcHNvbkBsaW5hcm8ub3JnAAoJEHzjJV0594ihmooP/1uzSMGQIoQMB8XeU/jT
 Da2iILybi6hGp7ILA27d0yN3tsJBxWGWs8wzNdzMo3NQ3J0o4foAUnS/R0Vjkg9w
 uphe5EA4HDsIrH05OouNb984BeEgNaC9HSqtyr9fXuh024NboULFKIm7REYm+QHT
 C5SrBtmonL1xE7FmAhudLWjl7ZlvxM6DJeoVViH4kKq0raTiILt6VJaGl9JfcAdL
 m9GEf9r/nh0sCq3GNgyc0y4BvHed+Kxzy1fsIi3jE6t8elaYYR72gNRQ5LaFxcnQ
 F04/UtH75qB4rqYsqqV1q0rFi+tj+p9wYTmxixaGWsVDX4Gb5KXuLWJhaRb5IvwC
 bdq/0IAXRr4vUL3y0tFWfCj7pHGaVc/gfXi8aieRXLGAZG+tdfuu99NCiulIZTfc
 QqZz12Z+99/qi6dK7dBQtaN8SyPeB1QXKWefeGo2Bt5QqiBmcKHxsQYMUo3nkf3J
 UXHpj4LG6Ldsi/w8VZfvXmM0/vbO/jrus9m+X2v+4tJyisjrsyv0FRnREI4avfbC
 l09P1ajv7RrAaxtab0smV9krqWZ/mSn0zcgcaD6RdKe0+SwsiP/CEx1z1Wb1MH9c
 wjEiClXjdVB39YVT0YVfG2Ho7qH8WRErxVyNb/f4QKHMXL1Mu91hFWhBBpUOGUj2
 7Jrq2zK1uWramtt7GBDpHYYH
 =Aqlc
 -----END PGP SIGNATURE-----

Merge tag 'kgdb-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux

Pull kgdb updates from Daniel Thompson:
 "Mostly clean ups although while Doug's was chasing down a odd lockdep
  warning he also did some work to improved debugger resilience when
  some CPUs fail to respond to the round up request.

  The main changes are:

   - Fixing a lockdep warning on architectures that cannot use an NMI
     for the round up plus related changes to make CPU round up and all
     CPU backtrace more resilient.

   - Constify the arch ops tables

   - A couple of other small clean ups

  Two of the three patchsets here include changes that spill over into
  arch/. Changes in the arch space are relatively narrow in scope (and
  directly related to kgdb). Didn't get comprehensive acks but all
  impacted maintainers were Cc:ed in good time"

* tag 'kgdb-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
  kgdb/treewide: constify struct kgdb_arch arch_kgdb_ops
  mips/kgdb: prepare arch_kgdb_ops for constness
  kdb: use bool for binary state indicators
  kdb: Don't back trace on a cpu that didn't round up
  kgdb: Don't round up a CPU that failed rounding up before
  kgdb: Fix kgdb_roundup_cpus() for arches who used smp_call_function()
  kgdb: Remove irq flags from roundup
2019-01-01 15:38:14 -08:00
Linus Torvalds fbea8c7c79 OpenRISC updates for 4.21
Just one change for 4.21:
  - Update comments for name change or32 -> or1k from Geert Uytterhoeven
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcKpJrAAoJEMOzHC1eZifkDC4QAJCia7c68WOSv6AfCPkf4dNQ
 xAnBB4iMn041QnmXm90XVx5IVrupNrtUVWqqwGqD6R7FuRQDbz+LpKY6jRSUDQpk
 E7HgFmvUbjU9WOUFqPClZ9hu/5NdnrcmXsV9fld4nUwMpIjay2ehgDFQlf/PZoSo
 P2Mh4WBVY+3ARSrEqtDxkFKlYushvueVjJLofRwjjb3CdryY9pQEyf521K94DUeS
 UUFSxZTXgHHRn3jXaMiXsIp5PXL/XOics1D1u+n/8/hBiMOKo/j/+byFmmF3LU15
 jz7P1XUSZ/UI6Ulkwh9GSQWKMrxTbPSQvEExHqtLx5fgITKOhNxeBAh+c9Kzt8a0
 pWsMioBsvDlZ07i9kfhpCfMZMzxLDy8c7aiCSthxSeKNPf5+NTJE3Z+7glyUT12s
 u8m4FnTHGsbnfQgRt3GwNRLpp/Mhp7SNqgKGw2xRR2EbsxBooQeycdkoldW2EoBW
 bL6DGXFIivsf1iuonDeybV/FMGeeV/3IwXKGzatwjkirgkbbB9gDH1gCCJOpUwC5
 PWjxQw+4OL4/7z9bvnCCH75hYg0MjcLfxdJfczJfRLaSL2xyfyrmt0mav4Xs06rQ
 NNGfX8Yl7BQgxf6jVB/jRL33GXx/lpE/J5XT7i3T917T0bOhfuhQJJoo2+15lc/M
 uxEES4JraL6NXCkr06dv
 =bY+D
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://github.com/openrisc/linux

Pull OpenRISC update from Stafford Horne:
 "Just one change for 4.21: Update comments for name change or32 -> or1k
  from Geert Uytterhoeven"

* tag 'for-linus' of git://github.com/openrisc/linux:
  openrisc: Fix broken paths to arch/or32
2019-01-01 15:35:55 -08:00
Linus Torvalds 28e8c4bc8e RTC for 4.21
Subsystem:
  - new %ptR printk format
  - rename core files
  - allow registration of multiple nvmem devices
 
 New driver:
  - i.MX system controller RTC
 
 Drivers:
  - abx80x: handle voltage ioctls, correct binding doc
  - m41t80: correct month in alarm reads
  - pcf85363: add pcf85263 support
  - pcf8523: properly handle battery low flag
  - s3c: limit alarm to one year in the future as ALMYEAR is broken
  - sun6i: rework clock output binding
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEXx9Viay1+e7J/aM4AyWl4gNJNJIFAlwqU44ACgkQAyWl4gNJ
 NJJjGxAAgQMTkarMx16icKpN35iuXgwZdIKKmWIHGyCJeB1ykHS8TgwkP+4pE1aN
 UwTw6x9TBxa9KpuexCgrx8/zppM0i1jacaxJkDbrj1OBPAlGrbJrwcSH029qHAu6
 N1Oo0GvAIPlEmIJkKVWkgZhGqUwvMvcy2amk06S92PPOIfr5zJsRzNmduEE7bpcl
 86EckuFOp9c1p4IayeQhIT+GHPtum4WkmGVw3+j0j/E6aCUD3thLohT+KuGfzzKn
 jHbtZ+/d17etKtxxI26YrmixH603t66ZSuc64rSvKRKYR8u/qqR3ZTotYVonsPHj
 NNQsWiNRzwkpiN9n1Big0tLJyXJ6qbYQIrJLMc19Jr10tS815WF5rjmNinfdSazX
 4xucIJpMh7VgA3W5BpvN1+UEahiznp2QGiLjauoruMrB7XUUSLPv6VohFiKAfd9S
 7SyV2moPWVnj4pJPH6Af2zVLE9YyPoWGvUSwosLZKhpoFNLOnVZAU0vo32M/23wv
 ejv4YPhtqxqT94XUyrWKE1DaTpxMqBHcHj2ThV+NGCWe4C0+KfW0zmbKm1X588UJ
 ZhmGODV9acU+46It5mFoE2Zb9WPyEwljjxbvXKQZhdONKIoZ6lz1i7nzy6C2qerQ
 ZW5baiaCvQ5e/NyWLxEZwvHukBo2OBxkXe8isuk/wz+7Qyw3l34=
 =5He5
 -----END PGP SIGNATURE-----

Merge tag 'rtc-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "Subsystem:
   - new %ptR printk format
   - rename core files
   - allow registration of multiple nvmem devices

  New driver:
   - i.MX system controller RTC

  Driver updates:
   - abx80x: handle voltage ioctls, correct binding doc
   - m41t80: correct month in alarm reads
   - pcf85363: add pcf85263 support
   - pcf8523: properly handle battery low flag
   - s3c: limit alarm to one year in the future as ALMYEAR is broken
   - sun6i: rework clock output binding"

* tag 'rtc-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (54 commits)
  rtc: rename core files
  rtc: nvmem: fix possible use after free
  rtc: add i.MX system controller RTC support
  dt-bindings: fsl: scu: add rtc binding
  rtc: pcf2123: Add Microcrystal rv2123
  rtc: class: reimplement devm_rtc_device_register
  rtc: enforce rtc_timer_init private_data type
  rtc: abx80x: Implement RTC_VL_READ,CLR ioctls
  rtc: pcf85363: Add support for NXP pcf85263 rtc
  dt-bindings: rtc: pcf85363: Document pcf85263 real-time clock
  rtc: pcf8523: don't return invalid date when battery is low
  dt-bindings: rtc: use a generic node name for ds1307
  PM: Switch to use %ptR
  m68k/mac: Switch to use %ptR
  Input: hp_sdc_rtc - Switch to use %ptR
  rtc: tegra: Switch to use %ptR
  rtc: s5m: Switch to use %ptR
  rtc: s3c: Switch to use %ptR
  rtc: rx8025: Switch to use %ptR
  rtc: rx6110: Switch to use %ptR
  ...
2019-01-01 13:24:31 -08:00
Linus Torvalds c9bef4a651 Pin control bulk changes for the v4.21 kernel cycle:
No core changes this time.
 
 New drivers:
 
 - NXP (ex Freescale) i.MX 8 QXP SoC driver.
 
 - Mediatek MT6797 SoC driver.
 
 - Mediatek MT7629 SoC driver.
 
 - Actions Semiconductor S700 SoC driver.
 
 - Renesas RZ/A2 SoC driver.
 
 - Allwinner sunxi suniv F1C100 SoC driver.
 
 - Qualcomm PMS405 PMIC driver.
 
 - Microsemi Ocelot Jaguar2 SoC driver.
 
 Improvements:
 
 - Some RT improvements (using raw spinlocks where appropriate).
 
 - A lot of new pin sets on the Renesas PFC pin controllers.
 
 - GPIO hogs now work on the Qualcomm SPMI/SSBI pin controller GPIO
   chips, and Xway.
 
 - Major modernization of the Intel pin control drivers.
 
 - STM32 pin control driver will now synchronize usage of pins
   with another CPU using a hardware spinlock.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcKN2qAAoJEEEQszewGV1zK5wP/2QbrvH8eW+mF9YD+1fr11Sp
 oCe52C7n1YMKt5R6vSFyLtqPYDehCP9gTS0Zlbz4HKyTe2E9OIuigrmg+1uQwxWp
 GSvxmMx9QFlNqUcWOvc90DYDfOh5ZPVIsP16k3DIlodVsQlSu4O4KF0pJseRyuSh
 PVn/MjPrGtyTB2TJzO/Oj3sadHhVRzTb6Zlk7uk5hak6ys5AYHetBHhuxAcicFv4
 OGwEOvaV5DiTO5wbbyNSmkF5NI+ApV2o4DRRNTXC+mJJSPCpQxFskLTmHu9wYKmE
 /p6Gp9dtxSS3QLA4NXsY+IrFJsU1q261gEvIsFa2upW5j7T8bLzRAzoFG+/dil6t
 k5GDnx8t7qSPXLme8/nJlX40O2CJs4sXKwCQY4vjsySW31ryqBMm4JNSQKTxe9Ma
 1RrZ7UR+P6IwupUsEYZkcneuu+oGMNYpbDG48R2utgECY4KN17wUjjZHkYHZNiDi
 Yk/CMkOXXuZnAZGfmaj8R9yjkjFZMZAqOYDJcruMzLFjAkw6fCmFipZLoSIN4+sJ
 u4RERrbsF+e5PY4BOfxYw5NIzTl60AQquttj//RJyLQDsQ/HMU9jaovW6E3JQytO
 NgU9RtEwrtK50ef5OYS4EtTlNi2B3arU83noI/oX3R52SoAIdMTHtVMgyECm3dMg
 XeLn9x2Ffy7a4PRruLoy
 =cm6m
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "We have no core changes but lots of incremental development in drivers
  all over the place: Renesas, NXP, Mediatek and Actions Semiconductor
  keep churning out new SoCs.

  I have some subtree maintainers for Renesas and Intel helping out to
  keep down the load, it's been working smoothly (Samsung also have a
  subtree but it was not used this cycle.)

  New drivers:

   - NXP (ex Freescale) i.MX 8 QXP SoC driver.

   - Mediatek MT6797 SoC driver.

   - Mediatek MT7629 SoC driver.

   - Actions Semiconductor S700 SoC driver.

   - Renesas RZ/A2 SoC driver.

   - Allwinner sunxi suniv F1C100 SoC driver.

   - Qualcomm PMS405 PMIC driver.

   - Microsemi Ocelot Jaguar2 SoC driver.

  Improvements:

   - Some RT improvements (using raw spinlocks where appropriate).

   - A lot of new pin sets on the Renesas PFC pin controllers.

   - GPIO hogs now work on the Qualcomm SPMI/SSBI pin controller GPIO
     chips, and Xway.

   - Major modernization of the Intel pin control drivers.

   - STM32 pin control driver will now synchronize usage of pins with
     another CPU using a hardware spinlock"

* tag 'pinctrl-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (145 commits)
  dt-bindings: arm: fsl-scu: add imx8qm pinctrl support
  pinctrl: freescale: Break dependency on SOC_IMX8MQ for i.MX8MQ
  pinctrl: imx-scu: Depend on IMX_SCU
  pinctrl: ocelot: Add dependency on HAS_IOMEM
  pinctrl: ocelot: add MSCC Jaguar2 support
  pinctrl: bcm: ns: support updated DT binding as syscon subnode
  dt-bindings: pinctrl: bcm4708-pinmux: rework binding to use syscon
  MAINTAINERS: merge at91 pinctrl entries
  pinctrl: imx8qxp: break the dependency on SOC_IMX8QXP
  pinctrl: uniphier: constify uniphier_pinctrl_socdata
  pinctrl: mediatek: improve Kconfig dependencies
  pinctrl: msm: mark PM functions as __maybe_unused
  dt-bindings: pinctrl: sunxi: Add supply properties
  pinctrl: meson: meson8b: add the missing GPIO_GROUPs for BOOT and CARD
  pinctrl: meson: meson8: add the missing GPIO_GROUPs for BOOT and CARD
  pinctrl: meson: meson8: rename the "gpio" function to "gpio_periphs"
  pinctrl: meson: meson8: rename the "gpio" function to "gpio_periphs"
  pinctrl: meson: meson8b: fix the GPIO function for the GPIOAO pins
  pinctrl: meson: meson8: fix the GPIO function for the GPIOAO pins
  pinctrl: sh-pfc: Make pinmux_cfg_reg.var_field_width[] variable-length
  ...
2019-01-01 13:19:16 -08:00
Linus Torvalds 115502a6f3 linux-watchdog 4.21-rc1 tag
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iEYEABECAAYFAlwopYUACgkQ+iyteGJfRsqOZwCfXM0u0XQJS6TZFtEOZp5gKq+d
 f/4AnRXcblmb1wJiEVItizB03leOWHqk
 =jry0
 -----END PGP SIGNATURE-----

Merge tag 'linux-watchdog-4.21-rc1' of git://www.linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:
 - add TQ-Systems TQMX86 watchdog driver
 - add Qualcomm PM8916 watchdog driver
 - w83627hf_wdt: add quirk for Inves system
 - renesas_wdt: several improvements and document r8a774c0 support
 - mena21_wdt, mtx-1: Convert to use GPIO descriptor
 - bcm281xx, ie6xx_wdt: convert to DEFINE_SHOW_ATTRIBUTE
 - documentation: add PM usage and kernel-api: don't reference removed functions
 - update bindings for MT7629 SoC
 - several small fixes

* tag 'linux-watchdog-4.21-rc1' of git://www.linux-watchdog.org/linux-watchdog: (22 commits)
  watchdog: tqmx86: Add watchdog driver for the IO controller
  dt-bindings: watchdog: renesas-wdt: Document r8a774c0 support
  watchdog: docs: kernel-api: don't reference removed functions
  watchdog: add documentation for PM usage
  watchdog: mtx-1: Convert to use GPIO descriptor
  watchdog: mena21_wdt: Convert to GPIO descriptors
  dt-bindings: watchdog: Add Qualcomm PM8916 watchdog
  watchdog: Add pm8916 watchdog driver
  dt-bindings: watchdog: update bindings for MT7629 SoC
  watchdog: renesas_wdt: don't keep timer value during suspend/resume
  watchdog: ie6xx_wdt: convert to DEFINE_SHOW_ATTRIBUTE
  watchdog: bcm281xx: convert to DEFINE_SHOW_ATTRIBUTE
  watchdog: asm9260_wdt: make array mode_name static, shrinks object size
  watchdog/hpwdt: Update driver version.
  watchdog/hpwdt: Do not claim unsupported hardware
  watchdog/hpwdt: Exclude via blacklist
  Watchdog: remove outdated comment
  watchdog: w83627hf_wdt: Add quirk for Inves system
  watchdog: cpwd: add of_node_put()
  watchdog: renesas_wdt: don't set divider while watchdog is running
  ...
2019-01-01 13:16:45 -08:00
Eric Biggers 57b0e31453 KEYS: fix parsing invalid pkey info string
We need to check the return value of match_token() for Opt_err before
doing anything with it.

[ Not only did the old "-1" value for Opt_err cause problems for the
  __test_and_set_bit(), as fixed in commit 94c13f66e1 ("security:
  don't use a negative Opt_err token index"), but accessing
  "args[0].from" is invalid for the Opt_err case, as pointed out by Eric
  later.  - Linus ]

Reported-by: syzbot+a22e0dc07567662c50bc@syzkaller.appspotmail.com
Fixes: 00d60fd3b9 ("KEYS: Provide keyctls to drive the new key type ops for asymmetric keys [ver #2]")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: stable@kernel.org # 4.20
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-01 13:13:19 -08:00
Huazhong Tan e888402789 net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENT
For HNAE3_DOWN_CLIENT calling hns3_nic_net_stop(), HNAE3_UP_CLIENT
should call hns3_nic_net_open(), since if the number of queue or
the map of TC has is changed before HHAE3_UP_CLIENT is called,
it will cause problem.

Also the HNS3_NIC_STATE_RESETTING flag needs to be cleared before
hns3_nic_net_open() called, and set it back while hns3_nic_net_open()
failed.

Fixes: bb6b94a896 ("net: hns3: Add reset interface implementation in client")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-01 12:13:44 -08:00
Willem de Bruijn cb9f1b7838 ip: validate header length on virtual device xmit
KMSAN detected read beyond end of buffer in vti and sit devices when
passing truncated packets with PF_PACKET. The issue affects additional
ip tunnel devices.

Extend commit 76c0ddd8c3 ("ip6_tunnel: be careful when accessing the
inner header") and commit ccfec9e5cb ("ip_tunnel: be careful when
accessing the inner header").

Move the check to a separate helper and call at the start of each
ndo_start_xmit function in net/ipv4 and net/ipv6.

Minor changes:
- convert dev_kfree_skb to kfree_skb on error path,
  as dev_kfree_skb calls consume_skb which is not for error paths.
- use pskb_network_may_pull even though that is pedantic here,
  as the same as pskb_may_pull for devices without llheaders.
- do not cache ipv6 hdrs if used only once
  (unsafe across pskb_may_pull, was more relevant to earlier patch)

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-01 12:05:02 -08:00
Willem de Bruijn 8c76e77f90 tap: call skb_probe_transport_header after setting skb->dev
The BPF flow dissector expects either skb->sk or skb->dev set on
all skbs. Delay flow dissection until after skb->dev is set.

This requires calling from within an rcu read-side critical section.
That is fine, see also the call from tun_xdp_one.

Fixes: d0e13a1488 ("flow_dissector: lookup netns by skb->sk if skb->dev is NULL")
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-01 12:01:02 -08:00
Cong Wang aff6db4545 ptr_ring: wrap back ->producer in __ptr_ring_swap_queue()
__ptr_ring_swap_queue() tries to move pointers from the old
ring to the new one, but it forgets to check if ->producer
is beyond the new size at the end of the operation. This leads
to an out-of-bound access in __ptr_ring_produce() as reported
by syzbot.

Reported-by: syzbot+8993c0fa96d57c399735@syzkaller.appspotmail.com
Fixes: 5d49de5320 ("ptr_ring: resize support")
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-01 11:58:33 -08:00
Takashi Iwai 3e9ad24b0e ALSA: hda - Revert DSP detection on legacy HD-audio driver
This essentially reverts the commits
  c337104b1a ("ALSA: HD-Audio: SKL+: abort probe if DSP is present
  and Skylake driver selected")
and
  d82b51c855 ("ALSA: HD-Audio: SKL+: force HDaudio legacy or SKL+
  driver selection")
for the path of legacy HD-audio controller (snd-hda-intel).

The automatic DSP detection and skip of binding with the legacy driver
caused regressions on several machines like Dell XPS13.  They give the
PCI class 0x40380 indicating the availability of DSP while they don't
work with ASoC SKL driver (yet).

As the support of ASoC driver for such devices isn't available, it's
better to revert the whole DSP-detection-and-skip behavior of the
legacy driver, so that we can get the old good driver working on such
devices.

The pci_binding option for ASoC SKL driver is still kept so that it
can work without blacklisting.

Fixes: c337104b1a ("ALSA: HD-Audio: SKL+: abort probe if DSP is present and Skylake driver selected")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Hans de Goede <hdegoede@redhat.com>
Reported-by: Azat Khuzhin <dohardgopro@gmail.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-01 20:43:01 +01:00
Zhu Yanjun 4087d2bc0d net: rds: remove unnecessary NULL check
In kfree, the NULL check is done.

Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-01 09:54:19 -08:00
yupeng 2b96547223 add document for TCP OFO, PAWS and skip ACK counters
add document and examples for below counters:
TcpExtTCPOFOQueue
TcpExtTCPOFODrop
TcpExtTCPOFOMerge
TcpExtPAWSActive
TcpExtPAWSEstab
TcpExtTCPACKSkippedSynRecv
TcpExtTCPACKSkippedPAWS
TcpExtTCPACKSkippedSeq
TcpExtTCPACKSkippedFinWait2
TcpExtTCPACKSkippedTimeWait
TcpExtTCPACKSkippedChallenge

Signed-off-by: yupeng <yupeng0921@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-01 09:51:14 -08:00
Deepa Dinamani 3a0ed3e961 sock: Make sock->sk_stamp thread-safe
Al Viro mentioned (Message-ID
<20170626041334.GZ10672@ZenIV.linux.org.uk>)
that there is probably a race condition
lurking in accesses of sk_stamp on 32-bit machines.

sock->sk_stamp is of type ktime_t which is always an s64.
On a 32 bit architecture, we might run into situations of
unsafe access as the access to the field becomes non atomic.

Use seqlocks for synchronization.
This allows us to avoid using spinlocks for readers as
readers do not need mutual exclusion.

Another approach to solve this is to require sk_lock for all
modifications of the timestamps. The current approach allows
for timestamps to have their own lock: sk_stamp_lock.
This allows for the patch to not compete with already
existing critical sections, and side effects are limited
to the paths in the patch.

The addition of the new field maintains the data locality
optimizations from
commit 9115e8cd2a ("net: reorganize struct sock for better data
locality")

Note that all the instances of the sk_stamp accesses
are either through the ioctl or the syscall recvmsg.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-01 09:47:59 -08:00
Xiaozhou Liu 8b6b25cf93 selftests/bpf: fix error printing in test_devmap()
As a simple fix, just print the correct map type.

Signed-off-by: Xiaozhou Liu <liuxiaozhou@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-01 13:48:59 +01:00
Sameer Pujar 63d2a9ec31 ALSA: hda/tegra: clear pending irq handlers
Even after disabling interrupts on the module, it could be possible
that irq handlers are still running. System hang is seen during
suspend path. It was found that, there were pending writes on the
HDA bus and clock was disabled by that time.

Above mentioned issue is fixed by clearing any pending irq handlers
before disabling clocks and returning from hda suspend.

Suggested-by: Mohan Kumar <mkumard@nvidia.com>
Suggested-by: Dara Ramesh <dramesh@nvidia.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-01 09:31:37 +01:00
Jian-Hong Pan 82b01149ec ALSA: hda/realtek: Enable the headset mic auto detection for ASUS laptops
The headset mic of ASUS laptops like UX533FD, UX433FN and UX333FA, whose
CODEC is Realtek ALC294 has jack auto detection feature. This patch
enables the feature.

Fixes: 4e05110673 ("ALSA: hda/realtek: Enable audio jacks of ASUS UX533FD with ALC294")
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-01 09:30:04 +01:00
Linus Torvalds e1ef035d27 ARM: SoC defconfig updates
Most changes here are to enable new drivers and platforms in the various
 configs that affect them. Most of these have been covered and described
 in the other branches, we mostly keep defconfig separate to avoid
 conflicts between SoC/dt/driver updates that they otherwise would be
 grouped with.
 
 One thing worth mentioning here is that OMAP changes from using their
 own UART driver, to 8250, for the multi_v7_defconfig shared config on
 32-bit. This means that the console is now named ttyS* instead of ttyO*.
 This change was already done for omap2_defconfig a while back, so most
 users of these configs have either already updated, or can easily follow
 the same patterns as they did at that time. This makes platform support
 slightly easier for distros, since they no longer need to keep track of
 a separate console prefix for these platforms.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlwqg+4PHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3nHcQAKrzSPsi3NWZHAIyP9Gcsu/mqebeB7ATnUVB
 EfsYl+0ZLwZjex2pI7YmDih4QgOui3caOYU3rlqcu+zTSXYp03GnzA/fuW/aOBr3
 Y4UYQcUIJULJyYzE14y5MhYxMfedF5U4yfayQj/6Xn4dojSICb19/CxD7lEtxUBQ
 DqYizTnR5ABRVDnRXmgo0TcHCSa05xP5Hn48DL02fJUc1oHzv3RoH2MrC4j4a2QO
 k0INYeq9cRFv9kcuz4S0VRXDvpA6cLsa9RZ8I3eJ+tpDFK8HmNyrij98CQLBwb/S
 UzuC+DvD5MdJsf6Tp15enXIKtLKBtEQiXVncX5dCFLGW+lfZb0FyMa6Q4herGEL3
 NLifwcxDwiATKJkGuQKJHhCnMVGanUz+fn+7nXbHtloOsR/2ttofaTFCCURN0Pr+
 oIa79JSd58SES+Rqz7V17r08SuK5iMjF8XENDMuim095WIt2ysoKW7P11eq/CjNf
 qheaiBK/ANHeYaVLb6OG7V5SMjsxWYcUfvwONiA5Qs1HbjiOXamUBOAiBF8zMBZc
 rd21X2kqVpfU/IDgqhWTEawtl76gh9+1uCbbL5l+qiwyFfRw0b/9pakMs3szgD+v
 2w49p/WwOQQoxzV5jCBlo36ZzKISrKGnTEQhRadtxCPPnrg/8emUNU6S/aHB2OmH
 x1Vehuja
 =65qL
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC defconfig updates from Olof Johansson:
 "Most changes here are to enable new drivers and platforms in the
  various configs that affect them. Most of these have been covered and
  described in the other branches, we mostly keep defconfig separate to
  avoid conflicts between SoC/dt/driver updates that they otherwise
  would be grouped with.

  One thing worth mentioning here is that OMAP changes from using their
  own UART driver, to 8250, for the multi_v7_defconfig shared config on
  32-bit. This means that the console is now named ttyS* instead of
  ttyO*. This change was already done for omap2_defconfig a while back,
  so most users of these configs have either already updated, or can
  easily follow the same patterns as they did at that time. This makes
  platform support slightly easier for distros, since they no longer
  need to keep track of a separate console prefix for these platforms"

* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits)
  Revert "arm64: defconfig: Enable FSL_MC_BUS and FSL_MC_DPIO"
  arm64: defconfig: Enable FSL_MC_BUS and FSL_MC_DPIO
  arm64: defconfig: Replace PINCTRL_MT7622 with PINCTRL_MTK_MOORE
  arm64: defconfig: Regenerate for v4.20
  ARM: multi_v7_defconfig: Add TOSHIBA TC358764 bridge driver
  ARM: multi_v7_defconfig: Add MAX8952 regulator driver
  ARM: exynos_defconfig: Add TOSHIBA TC358764 bridge driver
  ARM: exynos_defconfig: Add MAX8952 regulator driver
  ARM: exynos_defconfig: Add MAX8998 RTC and charger drivers
  ARM: imx_v6_v7_defconfig: add imx7ulp support
  ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX
  ARM: multi_v7_defconfig: enable STM32 analog & timer drivers
  arm64: defconfig: Enable GCC and PINCTRL for MSM8998
  arm64: defconfig: Enable core Qualcomm SDM845 options
  ARM: defconfig: Enable the PL111 DRM driver on vexpress
  ARM: defconfig: Update the vexpress defconfig
  arm64: defconfig: Enable some qcom remoteproc configs
  arm64: defconfig: Enable QCS404 configs
  ARM: imx_v6_v7_defconfig: Enable USB_ANNOUNCE_NEW_DEVICES
  ARM: imx_v6_v7_defconfig: Enable BT_BNEP
  ...
2018-12-31 17:40:14 -08:00
Linus Torvalds b7badd1d7a ARM: Device-tree updates
As usual, this is where the bulk of our changes end up landing each
 merge window.
 
 The individual updates are too many to enumerate, many many platforms
 have seen additions of device descriptions such that they are
 functionally more complete (in fact, this is often the bulk of updates
 we see).
 
 Instead I've mostly focused on highlighting the new platforms below as
 they are introduced. Sometimes the introduction is of mostly a fragment,
 that later gets filled in on later releases, and in some cases it's
 near-complete platform support. The latter is more common for derivative
 platforms that already has similar support in-tree.
 
 Two SoCs are slight outliers from the usual range of additions. Allwinner
 support for F1C100s, a quite old SoC (ARMv5-based) shipping in the
 Lychee Pi Nano platform. At the other end is NXP Layerscape LX2160A,
 a 16-core 2.2GHz Cortex-A72 SoC with a large amount of I/O aimed at
 infrastructure/networking.
 
 TI updates stick out in the diff stats too, in particular because they
 have moved the description of their L4 on-chip interconnect to devicetree,
 which opens up for removal of even more of their platform-specific
 'hwmod' description tables over the next few releases.
 
 SoCs:
  - Qualcomm QCS404 (4x Cortex-A53)
  - Allwinner T3 (rebranded R40) and f1c100s (armv5)
  - NXP i.MX7ULP (1x Cortex-A7 + 1x Cortex-M4)
  - NXP LS1028A (2x Cortex-A72), LX2160A (16x Cortex-A72)
 
 New platforms:
  - Rockchip: Gru Scarlet (RK3188 Tablet)
  - Amlogic: Phicomm N1 (S905D), Libretech S805-AC
  - Broadcom: Linksys EA6500 v2 Wi-Fi router (BCM4708)
  - Qualcomm: QCS404 base platform and EVB
  - Qualcomm: Remove of Arrow SD600
  - PXA: First PXA3xx DT board: Raumfeld
  - Aspeed: Facebook Backpack-CMM BMC
  - Renesas iWave G20D-Q7 (RZ/G1N)
  - Allwinner t3-cqa3t-bv3 (T3/R40) and Lichee Pi Nano (F1C100s)
  - Allwinner Emlid Neutis N5, Mapleboard MP130
  - Marvell Macchiatobin Single Shot (Armada 8040, no 10GbE)
  - i.MX: mtrion emCON-MX6, imx6ul-pico-pi, imx7d-sdb-reva
  - VF610: Liebherr's BK4 device, ZII SCU4 AIB board
  - i.MX7D PICO Hobbit baseboard
  - i.MX7ULP EVK board
  - NXP LX2160AQDS and LX2160ARDB boards
 
 Other:
  - Coresight binding updates across the board
  - CPU cooling maps updates across the board
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlwqgVYPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3ybAQAKAhd7XI5oY/wgdZZmxwcX+p7sU6LXeIlpWU
 XsPN1c14KU0siQv/znVA5OpF+fgn9eRqfWnMoDPlvdScTq07FM2NBmOJfVJYDPJa
 uvsll5m+84FCYanIR//YybS0tCM0b0BHoHo2DoyIxWeAwmw7BBVslddBdNg6R7hG
 S9rU9rUeqfCj7HbcPLqVn0DecMtEe7R8zmDtG1CSMqrhncifmoV4gtUnbYAg0GGT
 cSvj/zT8A1j0oJcU2Upl/Fr+7WJ7XB9pnku91nUOSXLv5VkyctLGomKq5F7O2/Xs
 2DhpH2yKwQt7S7TDiDd0jy64Of6+Xup35wEHevCeKrzGXcVRqqHwCkanLz9FdjVt
 yg4UrI/P1nY7h4ifZPplgigv+kA+IjRGiMrTRIEgSE5YK9U5AYkgembTWksRDikd
 5EpeJcMj2tBv4SDellNNtzh6GGTPBf3GJw3P9uRuxnQY/T31N2eX0XGeRikL+Lzf
 9nbQdJealmql3rCa5oFEJwSxrSaAv/ub7/294kPdEmXj8+3qUuH3hZAZOI9LSXGW
 GCuxsgccB2GF1M48x48/QpHgxb93okyXmndONZnU8uN8ba0zS4b8QLwvIY5rqv5Z
 kqD1VPBQf9kGVyzDyABRjFmGCDJcoOJf4QrzvNk9+xo8fXVk1xNtxu4MUsHvc2lS
 cU2RYWm/
 =sFVi
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM Device-tree updates from Olof Johansson:
 "As usual, this is where the bulk of our changes end up landing each
  merge window.

  The individual updates are too many to enumerate, many many platforms
  have seen additions of device descriptions such that they are
  functionally more complete (in fact, this is often the bulk of updates
  we see).

  Instead I've mostly focused on highlighting the new platforms below as
  they are introduced. Sometimes the introduction is of mostly a
  fragment, that later gets filled in on later releases, and in some
  cases it's near-complete platform support. The latter is more common
  for derivative platforms that already has similar support in-tree.

  Two SoCs are slight outliers from the usual range of additions.
  Allwinner support for F1C100s, a quite old SoC (ARMv5-based) shipping
  in the Lychee Pi Nano platform. At the other end is NXP Layerscape
  LX2160A, a 16-core 2.2GHz Cortex-A72 SoC with a large amount of I/O
  aimed at infrastructure/networking.

  TI updates stick out in the diff stats too, in particular because they
  have moved the description of their L4 on-chip interconnect to
  devicetree, which opens up for removal of even more of their
  platform-specific 'hwmod' description tables over the next few
  releases.

  SoCs:
   - Qualcomm QCS404 (4x Cortex-A53)
   - Allwinner T3 (rebranded R40) and f1c100s (armv5)
   - NXP i.MX7ULP (1x Cortex-A7 + 1x Cortex-M4)
   - NXP LS1028A (2x Cortex-A72), LX2160A (16x Cortex-A72)

  New platforms:
   - Rockchip: Gru Scarlet (RK3188 Tablet)
   - Amlogic: Phicomm N1 (S905D), Libretech S805-AC
   - Broadcom: Linksys EA6500 v2 Wi-Fi router (BCM4708)
   - Qualcomm: QCS404 base platform and EVB
   - Qualcomm: Remove of Arrow SD600
   - PXA: First PXA3xx DT board: Raumfeld
   - Aspeed: Facebook Backpack-CMM BMC
   - Renesas iWave G20D-Q7 (RZ/G1N)
   - Allwinner t3-cqa3t-bv3 (T3/R40) and Lichee Pi Nano (F1C100s)
   - Allwinner Emlid Neutis N5, Mapleboard MP130
   - Marvell Macchiatobin Single Shot (Armada 8040, no 10GbE)
   - i.MX: mtrion emCON-MX6, imx6ul-pico-pi, imx7d-sdb-reva
   - VF610: Liebherr's BK4 device, ZII SCU4 AIB board
   - i.MX7D PICO Hobbit baseboard
   - i.MX7ULP EVK board
   - NXP LX2160AQDS and LX2160ARDB boards

  Other:
   - Coresight binding updates across the board
   - CPU cooling maps updates across the board"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (648 commits)
  ARM: dts: suniv: Fix improper bindings include patch
  ARM: dts: sunxi: Enable Broadcom-based Bluetooth for multiple boards
  arm64: dts: allwinner: a64: bananapi-m64: Add Bluetooth device node
  ARM: dts: suniv: Fix improper bindings include patch
  arm64: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller
  arm64: dts: Remove unused properties from FSL QSPI driver nodes
  ARM: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller
  ARM: dts: imx6sx-sdb: Fix the reg properties for the FSL QSPI nodes
  ARM: dts: Remove unused properties from FSL QSPI driver nodes
  arm64: dts: ti: k3-am654: Enable main domain McSPI0
  arm64: dts: ti: k3-am654: Add McSPI DT nodes
  arm64: dts: ti: k3-am654: Populate power-domain property for UART nodes
  arm64: dts: ti: k3-am654-base-board: Enable ECAP PWM
  arm64: dts: ti: k3-am65-main: Add ECAP PWM node
  arm64: dts: ti: k3-am654-base-board: Add I2C nodes
  arm64: dts: ti: am654-base-board: Add pinmux for main uart0
  arm64: dts: ti: k3-am65: Add pinctrl regions
  dt-bindings: pinctrl: k3: Introduce pinmux definitions
  ARM: dts: exynos: Specify I2S assigned clocks in proper node
  ARM: dts: exynos: Add missing CPUs in cooling maps for Odroid X2
  ...
2018-12-31 17:36:02 -08:00
Linus Torvalds d36377c6eb ARM: SoC driver updates
Misc driver updates for platforms, many of them power related.
 
  - Rockchip adds power domain support for rk3066 and rk3188
  - Amlogic adds a power measurement driver
  - Allwinner adds SRAM support for three platforms (F1C100, H5, A64 C1)
  - Wakeup and ti-sysc (platform bus) fixes for OMAP/DRA7
  - Broadcom fixes suspend/resume with Thumb2 kernels, and improves
    stability of a handful of firmware/platform interfaces
  - PXA completes their conversion to dmaengine framework
  - Renesas does a bunch of PM cleanups across many platforms
  - Tegra adds support for suspend/resume on T186/T194, which includes
    some driver cleanups and addition of wake events
  - Tegra also adds a driver for memory controller (EMC) on Tegra2
  - i.MX tweaks power domain bindings, and adds support for i.MX8MQ in GPC
  - Atmel adds identifiers and LPDDR2 support for a new SoC, SAM9X60
 
  + misc cleanups across several platforms
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlwqd4APHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3HXoP/icWJTGrbf9R6T7r0RWB3xeV8ouTPMM8YM5C
 6wD4LkkjgZ16Hz/ellJ0Oug77LdnJ/ZI7jH2u0IcKRXr4sL94hEo11jAJLLtCHpt
 rGiItMuEDMhNFcAK/yREI6FtRqjNZhsTuR+gkcjzMnGLCaTA1+RwQNdugH0hh0fF
 z8C6tjN+fRIeS0wInBzR/402GcgRU0DIJrr0kmklS0u6tc2QW24ffv8ymvMiVO46
 l8VemmdxVZsBU2iehraPy6mSXsyTm04dNTuHnrIw3nE3kTJF7jMvpqI/euU1eZl6
 6EzrrCym8nC66IlqhHMBB427PK8sRqJTqwqSXO6e90AqiK4H2bMovXKiob/Psq+e
 yWqPOrAr8YBLqTgauvCzVm/xneT5rZM4N0BYhOk172Uk52qenNWDnqHj41A4CMSM
 /id3L1cHs5nf2qwuMncXvLX+Y2vO2n6cMmF8cDRLu592OBZRcVepUM0xoaSdZScv
 LJsP3jH3RRcY3L2rf7bY2Mitp48bDgZMZdw/viSHsFS+SVr225uNFALFDQ9kNEoZ
 2d9i9IvC7xOMhdVAX03U7DuRcpKXBPcv+arA57PiVvR4M1HeU7VvD4ayP5loVX2J
 GoDIKiPQitAsOKzyPyZ5Jw04lxio3xZbrbmmVzEH8uKWIV5omdiMnSrFsEfduRCT
 rU+Mqe2j
 =yEX2
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "Misc driver updates for platforms, many of them power related.

   - Rockchip adds power domain support for rk3066 and rk3188

   - Amlogic adds a power measurement driver

   - Allwinner adds SRAM support for three platforms (F1C100, H5, A64
     C1)

   - Wakeup and ti-sysc (platform bus) fixes for OMAP/DRA7

   - Broadcom fixes suspend/resume with Thumb2 kernels, and improves
     stability of a handful of firmware/platform interfaces

   - PXA completes their conversion to dmaengine framework

   - Renesas does a bunch of PM cleanups across many platforms

   - Tegra adds support for suspend/resume on T186/T194, which includes
     some driver cleanups and addition of wake events

   - Tegra also adds a driver for memory controller (EMC) on Tegra2

   - i.MX tweaks power domain bindings, and adds support for i.MX8MQ in
     GPC

   - Atmel adds identifiers and LPDDR2 support for a new SoC, SAM9X60

  and misc cleanups across several platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits)
  ARM: at91: add support in soc driver for new SAM9X60
  ARM: at91: add support in soc driver for LPDDR2 SiP
  memory: omap-gpmc: Use of_node_name_eq for node name comparisons
  bus: ti-sysc: Check for no-reset and no-idle flags at the child level
  ARM: OMAP2+: Check also the first dts child for hwmod flags
  soc: amlogic: meson-clk-measure: Add missing REGMAP_MMIO dependency
  soc: imx: gpc: Increase GPC_CLK_MAX to 7
  soc: renesas: rcar-sysc: Fix power domain control after system resume
  soc: renesas: rcar-sysc: Merge PM Domain registration and linking
  soc: renesas: rcar-sysc: Remove rcar_sysc_power_{down,up}() helpers
  soc: renesas: r8a77990-sysc: Fix initialization order of 3DG-{A,B}
  dt-bindings: sram: sunxi: Add compatible for the A64 SRAM C1
  dt-bindings: sram: sunxi: Add bindings for the H5 with SRAM C1
  dt-bindings: sram: Add Allwinner suniv F1C100s
  soc: sunxi: sram: Add support for the H5 SoC system control
  soc: sunxi: sram: Enable EMAC clock access for H3 variant
  soc: imx: gpcv2: add support for i.MX8MQ SoC
  soc: imx: gpcv2: move register access table to domain data
  soc: imx: gpcv2: prefix i.MX7 specific defines
  dmaengine: pxa: make the filter function internal
  ...
2018-12-31 17:32:35 -08:00
Linus Torvalds 0922275ef1 ARM: SoC platform updates
SoC updates, mostly refactorings and cleanups of old legacy platforms,
 but also a few more things:
 
 New SoC support this release:
  - NXP/Freescale i.MX7ULP (1x Cortex-A7, Cortex-M4, graphics, etc)
  - Allwinner F1C100, older platform with an ARM926-EJS (ARMv5) core
 
 Cleanups of various platforms:
  - OMAP1 ams-delta does some GPIO cleanups
  - Davinci removes of at24 platform data
  - Samsung cleans up old wakeup, PM debug and secondary core boot code
  - Renesas moves around config options and PM code to drivers/soc for
    sharing with 64-bit and more consistency
  - i.MX, Broadcom and SoCFPGA all have tweaks to lowlevel debug console setups
  - SoCFPGA adds explicit selection of ARM errata and removes some unused code
 
 This tag also contains a few patches that I had queued up as fixes for
 4.20 but didn't send in before the release.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlwqdD8PHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3NQQP+gNhDCR01wy8EqmCuUn1nmoatnF9ViYER9yw
 tlWysax29ba5DGuSKkBCRooTDUNlVIMPdb7vE74CWoDVubexab67qFVJz+uRsXC5
 Gt/10STcU/i/Ga4bpkJxz47PfLHpVw1IwKUV1eoFWtLF7QQwfxiH8mr7vZj7XQo2
 3K95Adf13E6iIfbHcfBgEF0CjImUiZVq2E0DWMsE0Yti0ygVkNZeRXGHAUfQm/kD
 bBYOaHuuuiCXKp7dF9vzAC+iAqerudWYvxuHKPY0pU8T8hpj5P+UjGgCSeRdsLJz
 30MRr3t9WhPKvUYDVdIwsE5o1y1S2ZzO1FrTeRiJ8pem8PTliljXE3bIeTvu7uct
 n9lNquwvcjVutX7uYOesUmfGLGKQlCwwgg0l997OLe7/o9hzAdnptVvTciCVoanI
 r0ACjazbgIHGdb5rFLb5/Kkb+IqOc0d57CHiQacri1MN5zSQ9wLCZpXH8YEdibcI
 zY0DBlH2ga7Qh7rtlPi4I0gLNUG8jYclUwRbQYUKGlh0Bsv/J4abR49UC4byn2Vj
 kdEO1ASaNIwMJgBgSNAIoop/JhEnO+/ECJoB/pYCvNts6W/LckbMtPVhAofTIVTz
 B0pAexDPT4HW//vQ7iOmXraIeUi/HDTaT/64gWsoMnF6LntgcF79NDx4KJDXNRId
 Jra+EkHq
 =m7me
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm SoC platform updates from Olof Johansson:
 "SoC updates, mostly refactorings and cleanups of old legacy platforms,
  but also a few more things:

  New SoC support this release:
   - NXP/Freescale i.MX7ULP (1x Cortex-A7, Cortex-M4, graphics, etc)
   - Allwinner F1C100, older platform with an ARM926-EJS (ARMv5) core

  Cleanups of various platforms:
   - OMAP1 ams-delta does some GPIO cleanups
   - Davinci removes of at24 platform data
   - Samsung cleans up old wakeup, PM debug and secondary core boot code
   - Renesas moves around config options and PM code to drivers/soc for
     sharing with 64-bit and more consistency
   - i.MX, Broadcom and SoCFPGA all have tweaks to lowlevel debug
     console setups
   - SoCFPGA adds explicit selection of ARM errata and removes some
     unused code

  This also contains a few patches that I had queued up as fixes for
  4.20 but didn't send in before the release"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (68 commits)
  arm64: dts: renesas: draak: Fix CVBS input
  ARM: omap2: avoid section mismatch warning
  ARM: tegra: avoid section mismatch warning
  ARM: ks8695: fix section mismatch warning
  ARM: pxa: avoid section mismatch warning
  ARM: mmp: fix pxa168_device_usb_phy use on aspenite
  ARM: mmp: fix timer_init calls
  ARM: OMAP1: fix USB configuration for device-only setups
  ARM: OMAP1: add MMC configuration for Palm Tungsten E
  ARM: imx: fix dependencies on imx7ulp
  ARM: meson: select HAVE_ARM_TWD and ARM_GLOBAL_TIMER
  MAINTAINERS: add drivers/soc/amlogic/ to amlogic list
  ARM: imx: add initial support for imx7ulp
  ARM: debug-imx: only define DEBUG_IMX_UART_PORT if needed
  ARM: dts: Fix OMAP4430 SDP Ethernet startup
  ARM: dts: am335x-pdu001: Fix polarity of card detection input
  ARM: OMAP1: ams-delta: Fix audio permanently muted
  ARM: dts: omap5: Fix dual-role mode on Super-Speed port
  arm64: dts: rockchip: fix rk3399-rockpro64 regulator gpios
  ARM: davinci: da850-evm: remove unnecessary include
  ...
2018-12-31 17:27:54 -08:00
Tyrel Datwyler 756af9c642 ibmveth: fix DMA unmap error in ibmveth_xmit_start error path
Commit 33a48ab105 ("ibmveth: Fix DMA unmap error") fixed an issue in the
normal code path of ibmveth_xmit_start() that was originally introduced by
Commit 6e8ab30ec6 ("ibmveth: Add scatter-gather support"). This original
fix missed the error path where dma_unmap_page is wrongly called on the
header portion in descs[0] which was mapped with dma_map_single. As a
result a failure to DMA map any of the frags results in a dmesg warning
when CONFIG_DMA_API_DEBUG is enabled.

------------[ cut here ]------------
DMA-API: ibmveth 30000002: device driver frees DMA memory with wrong function
  [device address=0x000000000a430000] [size=172 bytes] [mapped as page] [unmapped as single]
WARNING: CPU: 1 PID: 8426 at kernel/dma/debug.c:1085 check_unmap+0x4fc/0xe10
...
<snip>
...
DMA-API: Mapped at:
ibmveth_start_xmit+0x30c/0xb60
dev_hard_start_xmit+0x100/0x450
sch_direct_xmit+0x224/0x490
__qdisc_run+0x20c/0x980
__dev_queue_xmit+0x1bc/0xf20

This fixes the API misuse by unampping descs[0] with dma_unmap_single.

Fixes: 6e8ab30ec6 ("ibmveth: Add scatter-gather support")
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-31 15:40:11 -08:00
Olof Johansson cac1fc8fb5 Merge branch 'fixes' into next/soc
Merge in fixes here, since the last batch didn't make it in before the
release of 4.20, and we might as well group them with this set of
patches.

* fixes: (822 commits)
  arm64: dts: renesas: draak: Fix CVBS input
  ARM: dts: Fix OMAP4430 SDP Ethernet startup
  ARM: dts: am335x-pdu001: Fix polarity of card detection input
  ARM: OMAP1: ams-delta: Fix audio permanently muted
  ARM: dts: omap5: Fix dual-role mode on Super-Speed port
  arm64: dts: rockchip: fix rk3399-rockpro64 regulator gpios
  ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock
  ARM: imx: update the cpu power up timing setting on i.mx6sx
  Revert "arm64: dts: marvell: add CPU Idle power state support on Armada 7K/8K"
  ARM: dts: imx7d-pico: Describe the Wifi clock
  ARM: dts: realview: Fix some more duplicate regulator nodes
  MAINTAINERS: update entry for MMP platform
  ARM: mmp/mmp2: fix cpu_is_mmp2() on mmp2-dt
  MAINTAINERS: mediatek: Update SoC entry
  ARM: dts: bcm2837: Fix polarity of wifi reset GPIOs
  + Linux 4.20-rc5

Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-31 11:54:03 -08:00
Linus Torvalds 495d714ad1 Tracing changes for v4.21:
- Rework of the kprobe/uprobe and synthetic events to consolidate all
    the dynamic event code. This will make changes in the future easier.
 
  - Partial rewrite of the function graph tracing infrastructure.
    This will allow for multiple users of hooking onto functions
    to get the callback (return) of the function. This is the ground
    work for having kprobes and function graph tracer using one code base.
 
  - Clean up of the histogram code that will facilitate adding more
    features to the histograms in the future.
 
  - Addition of str_has_prefix() and a few use cases. There currently
    is a similar function strstart() that is used in a few places, but
    only returns a bool and not a length. These instances will be
    removed in the future to use str_has_prefix() instead.
 
  - A few other various clean ups as well.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXCawlBQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qhbcAQCFeT0fWWTUxofBQz5jqsHaRnVg21+9
 X4sTldYRYEn4YgEAmWOyiwq7zvrsAu4ZwkNBMeqxn3tVymYHiGOGe3Y4BAw=
 =u96o
 -----END PGP SIGNATURE-----

Merge tag 'trace-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:

 - Rework of the kprobe/uprobe and synthetic events to consolidate all
   the dynamic event code. This will make changes in the future easier.

 - Partial rewrite of the function graph tracing infrastructure. This
   will allow for multiple users of hooking onto functions to get the
   callback (return) of the function. This is the ground work for having
   kprobes and function graph tracer using one code base.

 - Clean up of the histogram code that will facilitate adding more
   features to the histograms in the future.

 - Addition of str_has_prefix() and a few use cases. There currently is
   a similar function strstart() that is used in a few places, but only
   returns a bool and not a length. These instances will be removed in
   the future to use str_has_prefix() instead.

 - A few other various clean ups as well.

* tag 'trace-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (57 commits)
  tracing: Use the return of str_has_prefix() to remove open coded numbers
  tracing: Have the historgram use the result of str_has_prefix() for len of prefix
  tracing: Use str_has_prefix() instead of using fixed sizes
  tracing: Use str_has_prefix() helper for histogram code
  string.h: Add str_has_prefix() helper function
  tracing: Make function ‘ftrace_exports’ static
  tracing: Simplify printf'ing in seq_print_sym
  tracing: Avoid -Wformat-nonliteral warning
  tracing: Merge seq_print_sym_short() and seq_print_sym_offset()
  tracing: Add hist trigger comments for variable-related fields
  tracing: Remove hist trigger synth_var_refs
  tracing: Use hist trigger's var_ref array to destroy var_refs
  tracing: Remove open-coding of hist trigger var_ref management
  tracing: Use var_refs[] for hist trigger reference checking
  tracing: Change strlen to sizeof for hist trigger static strings
  tracing: Remove unnecessary hist trigger struct field
  tracing: Fix ftrace_graph_get_ret_stack() to use task and not current
  seq_buf: Use size_t for len in seq_buf_puts()
  seq_buf: Make seq_buf_puts() null-terminate the buffer
  arm64: Use ftrace_graph_get_ret_stack() instead of curr_ret_stack
  ...
2018-12-31 11:46:59 -08:00
Linus Torvalds f12e840c81 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha
Pull alpha architecture updates from Matt Turner:
 "A few small changes for alpha as well as the new system call table
  generation support from Firoz Khan"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
  alpha: Remove some unused variables
  alpha: rtc: simplify alpha_rtc_init
  alpha: Fix a typo on ptrace.h
  alpha: fix spelling mistake QSD_PORT_ACTUVE -> QSD_PORT_ACTIVE
  alpha: generate uapi header and syscall table header files
  alpha: add system call table generation support
  alpha: add __NR_syscalls along with NR_SYSCALLS
  alpha: remove CONFIG_OSF4_COMPAT flag from syscall table
  alpha: move __IGNORE* entries to non uapi header
2018-12-31 09:57:14 -08:00
Linus Torvalds e3ed513bcf Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
 "This is a revert for a lockup in cgroups-intense workloads - the real
  fixes will come later"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix infinite loop in update_blocked_averages() by reverting a9e7f6544b
2018-12-31 09:54:17 -08:00
Linus Torvalds 2a1a2c1a76 dax fix 4.21
* Clean up unnecessary usage of prepare_to_wait_exclusive()
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcJ8sYAAoJEB7SkWpmfYgCdJ8QAJ6uPXu26SOfwew3MITNfNGO
 8VXnjDlOq8mi9u51xPeurcT+4h3g1AiEMGl6ugI8Jxx704a4/P80fnAjVTmYvugy
 7Ub29tTpqFPaermaT2N/K4zyqZxo/ozo5k1q3EqvNYc2IIBDlHKwKcirQpTqzIJ/
 hv8sgLLf/f9J6CtBNSXeGfsV6DKp8bmqXvSGzSsphhbkcW/i1UMCey5rXN5iIT4/
 gSdSeLxP6asjzeGm1/sC1G6g3Pi6USVmWe6Cs7dMbPSgkmzpGirkobmx+e34npBQ
 gmabFMxaClPCar2vAGorhPbtXu5uZrHCURirVpMvmIj9MJlK/8uX4kbgn6r6N5nS
 hZRZlnIvvjfucb66xCyFE/1I2xL7iIdOlcLSyG4f6bGAZTmupFGGOsoyf+BQSeT0
 08n4rvmBWQ/thUXAzkR4yUu77zRmQkmwbTjnOXUv4GNocvMoUcLwazh1QeY8W2rW
 RnUkk8B3iEgjfpKrjok/6MWd8qokwUVozOKUSVvKc8MEMraPVNzQMDKIl0hWUuE5
 kjF+YXv+qozYvLR7IToqx+2TZp6VcZUujV5qof05nPQGHIztkwHIKZg7EimZe8qa
 hKZA2X+1XOv2EGYLq5XexxR8rehiqgH7HlaMwuQBYqEnmkTx4tVWHwax2+vzVnVh
 UcpyHRN2RFwPWIIUTaeN
 =2anQ
 -----END PGP SIGNATURE-----

Merge tag 'dax-fix-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull dax fix from Dan Williams:
 "Clean up unnecessary usage of prepare_to_wait_exclusive().

  While I feel a bit silly sending a single-commit pull-request there is
  nothing else queued up for dax this cycle. This change has shipped in
  -next for multiple releases"

* tag 'dax-fix-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  dax: Use non-exclusive wait in wait_entry_unlocked()
2018-12-31 09:46:39 -08:00
Linus Torvalds 9ab97aea85 f2fs-for-4.21-rc1
In this round, we've focused on bug fixes since Pixel devices have been
 shipping with f2fs. Some of them were related to hardware encryption support
 which are actually not an issue in mainline, but would be better to merge
 them in order to avoid potential bugs.
 
 Enhancement:
  - do GC sub-sections when the section is large
  - add a flag in ioctl(SHUTDOWN) to trigger fsck for QA
  - use kvmalloc() in order to give another chance to avoid ENOMEM
 
 Bug fix:
  - fix accessing memory boundaries in a malformed iamge
  - GC gives stale unencrypted block
  - GC counts in large sections
  - detect idle time more precisely
  - block allocation of DIO writes
  - race conditions between write_begin and write_checkpoint
  - allow GCs for node segments via ioctl()
 
 There are various clean-ups and minor bug fixes as well.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE00UqedjCtOrGVvQiQBSofoJIUNIFAlwmkzcACgkQQBSofoJI
 UNLIlw//RUd8rH8VMW/BcXQ3fwB8qFCk296cIVlWQu12BV7vmMKY886Sc+C9uAuR
 9Lze4D6Iyg1k2KLkaWKhnE2E4ZWQ2O5zVf11r4amm1bN9glPJAKfLWbenJhMfeGa
 IdWo1ksntxgjfqLim2QlGSv5cBUjEo8zf32D446BbQURQMD/mm/lndywItS5vTx1
 2eGKJ3pSXX6geFzyf1pD/wmC/7j6roKaTKAIMBagIuINNukeHctT/gRfklmYmOFC
 lRbXlsYhjIfGln6gktY6r4qyZbouOMad2fDl+dkp+UewQM4/2xLUaMqiN2eqd7Hr
 cag9LGe80MGgWwesqS6VOJHQviOlNd78Ie//iO1+ZsaIxKrvgzocRSDdxZswv+Vq
 reZNsEKH0s4/0ik9hiprW1NdQLvtg7e/UWPyrRvVRlDVitW/BXOWRBpGVgkdg01K
 OmAxNrVcr2+Gxp8jZL7M+rQdpApL/ms31x9HE/8u5ABBZfmCy3zhpICTZ6Hdngp1
 3iUi2PvKUg+Y7KgII1nK2HLDpmZZ5UkLm8NhxLI0ntBWExjQjOBasOxPJf4en/UR
 TAtK3ozNKim3fQ01NCBy3B8WMKRtovxLK6PgqNPROJparlKJ3FEHnPIrYKglDUPg
 sxWCm1gFSraRGP86TaeGeD+v+PP6erI9CTaf6F/U3pWFgIpHoPg=
 =NEns
 -----END PGP SIGNATURE-----

Merge tag 'f2fs-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs

Pull f2fs updates from Jaegeuk Kim:
 "In this round, we've focused on bug fixes since Pixel devices have
  been shipping with f2fs. Some of them were related to hardware
  encryption support which are actually not an issue in mainline, but
  would be better to merge them in order to avoid potential bugs.

  Enhancements:
   - do GC sub-sections when the section is large
   - add a flag in ioctl(SHUTDOWN) to trigger fsck for QA
   - use kvmalloc() in order to give another chance to avoid ENOMEM

  Bug fixes:
   - fix accessing memory boundaries in a malformed iamge
   - GC gives stale unencrypted block
   - GC counts in large sections
   - detect idle time more precisely
   - block allocation of DIO writes
   - race conditions between write_begin and write_checkpoint
   - allow GCs for node segments via ioctl()

  There are various clean-ups and minor bug fixes as well"

* tag 'f2fs-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (43 commits)
  f2fs: sanity check of xattr entry size
  f2fs: fix use-after-free issue when accessing sbi->stat_info
  f2fs: check PageWriteback flag for ordered case
  f2fs: fix validation of the block count in sanity_check_raw_super
  f2fs: fix missing unlock(sbi->gc_mutex)
  f2fs: fix to dirty inode synchronously
  f2fs: clean up structure extent_node
  f2fs: fix block address for __check_sit_bitmap
  f2fs: fix sbi->extent_list corruption issue
  f2fs: clean up checkpoint flow
  f2fs: flush stale issued discard candidates
  f2fs: correct wrong spelling, issing_*
  f2fs: use kvmalloc, if kmalloc is failed
  f2fs: remove redundant comment of unused wio_mutex
  f2fs: fix to reorder set_page_dirty and wait_on_page_writeback
  f2fs: clear PG_writeback if IPU failed
  f2fs: add an ioctl() to explicitly trigger fsck later
  f2fs: avoid frequent costly fsck triggers
  f2fs: fix m_may_create to make OPU DIO write correctly
  f2fs: fix to update new block address correctly for OPU
  ...
2018-12-31 09:41:37 -08:00
Finn Thain 427c5ce441 block/swim3: Fix regression on PowerBook G3
As of v4.20, the swim3 driver crashes when loaded on a PowerBook G3
(Wallstreet).

MacIO PCI driver attached to Gatwick chipset
MacIO PCI driver attached to Heathrow chipset
swim3 0.00015000:floppy: [fd0] SWIM3 floppy controller in media bay
0.00013020:ch-a: ttyS0 at MMIO 0xf3013020 (irq = 16, base_baud = 230400) is a Z85c30 ESCC - Serial port
0.00013000:ch-b: ttyS1 at MMIO 0xf3013000 (irq = 17, base_baud = 230400) is a Z85c30 ESCC - Infrared port
macio: fixed media-bay irq on gatwick
macio: fixed left floppy irqs
swim3 1.00015000:floppy: [fd1] Couldn't request interrupt
Unable to handle kernel paging request for data at address 0x00000024
Faulting instruction address: 0xc02652f8
Oops: Kernel access of bad area, sig: 11 [#1]
BE SMP NR_CPUS=2 PowerMac
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.20.0 #2
NIP:  c02652f8 LR: c026915c CTR: c0276d1c
REGS: df43ba10 TRAP: 0300   Not tainted  (4.20.0)
MSR:  00009032 <EE,ME,IR,DR,RI>  CR: 28228288  XER: 00000100
DAR: 00000024 DSISR: 40000000
GPR00: c026915c df43bac0 df439060 c0731524 df494700 00000000 c06e1c08 00000001
GPR08: 00000001 00000000 df5ff220 00001032 28228282 00000000 c0004ca4 00000000
GPR16: 00000000 00000000 00000000 c073144c dfffe064 c0731524 00000120 c0586108
GPR24: c073132c c073143c c073143c 00000000 c0731524 df67cd70 df494700 00000001
NIP [c02652f8] blk_mq_free_rqs+0x28/0xf8
LR [c026915c] blk_mq_sched_tags_teardown+0x58/0x84
Call Trace:
[df43bac0] [c0045f50] flush_workqueue_prep_pwqs+0x178/0x1c4 (unreliable)
[df43bae0] [c026915c] blk_mq_sched_tags_teardown+0x58/0x84
[df43bb00] [c02697f0] blk_mq_exit_sched+0x9c/0xb8
[df43bb20] [c0252794] elevator_exit+0x84/0xa4
[df43bb40] [c0256538] blk_exit_queue+0x30/0x50
[df43bb50] [c0256640] blk_cleanup_queue+0xe8/0x184
[df43bb70] [c034732c] swim3_attach+0x330/0x5f0
[df43bbb0] [c034fb24] macio_device_probe+0x58/0xec
[df43bbd0] [c032ba88] really_probe+0x1e4/0x2f4
[df43bc00] [c032bd28] driver_probe_device+0x64/0x204
[df43bc20] [c0329ac4] bus_for_each_drv+0x60/0xac
[df43bc50] [c032b824] __device_attach+0xe8/0x160
[df43bc80] [c032ab38] bus_probe_device+0xa0/0xbc
[df43bca0] [c0327338] device_add+0x3d8/0x630
[df43bcf0] [c0350848] macio_add_one_device+0x444/0x48c
[df43bd50] [c03509f8] macio_pci_add_devices+0x168/0x1bc
[df43bd90] [c03500ec] macio_pci_probe+0xc0/0x10c
[df43bda0] [c02ad884] pci_device_probe+0xd4/0x184
[df43bdd0] [c032ba88] really_probe+0x1e4/0x2f4
[df43be00] [c032bd28] driver_probe_device+0x64/0x204
[df43be20] [c032bfcc] __driver_attach+0x104/0x108
[df43be40] [c0329a00] bus_for_each_dev+0x64/0xb4
[df43be70] [c032add8] bus_add_driver+0x154/0x238
[df43be90] [c032ca24] driver_register+0x84/0x148
[df43bea0] [c0004aa0] do_one_initcall+0x40/0x188
[df43bf00] [c0690100] kernel_init_freeable+0x138/0x1d4
[df43bf30] [c0004cbc] kernel_init+0x18/0x10c
[df43bf40] [c00121e4] ret_from_kernel_thread+0x14/0x1c
Instruction dump:
5484d97e 4bfff4f4 9421ffe0 7c0802a6 bf410008 7c9e2378 90010024 8124005c
2f890000 419e0078 81230004 7c7c1b78 <81290024> 2f890000 419e0064 81440000
---[ end trace 12025ab921a9784c ]---

Reverting commit 8ccb8cb189 ("swim3: convert to blk-mq") resolves the
problem.

That commit added a struct blk_mq_tag_set to struct floppy_state and
initialized it with a blk_mq_init_sq_queue() call. Unfortunately, there
is a memset() in swim3_add_device() that subsequently clears the
floppy_state struct. That means fs->tag_set->ops is a NULL pointer, and
it gets dereferenced by blk_mq_free_rqs() which gets called in the
request_irq() error path. Move the memset() to fix this bug.

BTW, the request_irq() failure for the left mediabay floppy (fd1) is not
a regression. I don't know why it happens. The right media bay floppy
(fd0) works fine however.

Reported-and-tested-by: Stan Johnson <userm57@yahoo.com>
Fixes: 8ccb8cb189 ("swim3: convert to blk-mq")
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-31 10:19:19 -07:00
Finn Thain 296dcc40f2 block/swim3: Fix -EBUSY error when re-opening device after unmount
When the block device is opened with FMODE_EXCL, ref_count is set to -1.
This value doesn't get reset when the device is closed which means the
device cannot be opened again. Fix this by checking for refcount <= 0
in the release method.

Reported-and-tested-by: Stan Johnson <userm57@yahoo.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-31 10:19:15 -07:00
Finn Thain f3010ec5b7 block/swim3: Remove dead return statement
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-31 10:19:13 -07:00
Finn Thain d4d179c37c block/amiflop: Don't log error message on invalid ioctl
Cc: linux-m68k@lists.linux-m68k.org
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-31 10:19:11 -07:00
Vasily Averin 0ad30ff67b nfs: fixed broken compilation in nfs_callback_up_net()
Patch fixes compilation error in nfs_callback_up_net()
serv->sv_bc_enabled is defined under enabled CONFIG_SUNRPC_BACKCHANNEL,
however nfs_callback_up_net() can access it even if this config option
was not set.

Fixes: a289ce5311 (sunrpc: replace svc_serv->sv_bc_xprt by boolean flag)
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-12-31 11:25:16 -05:00
Vinod Koul 660611827c Merge branch 'topic/xilinx' into for-linus 2018-12-31 19:32:32 +05:30
Vinod Koul 69ca36b3d6 Merge branch 'topic/uniphier' into for-linus 2018-12-31 19:32:27 +05:30
Vinod Koul 990beed934 Merge branch 'topic/sprd' into for-linus 2018-12-31 19:32:21 +05:30
Vinod Koul f782086a49 Merge branch 'topic/sh' into for-linus 2018-12-31 19:32:16 +05:30
Vinod Koul 56e8e1a118 Merge branch 'topic/sa11x0' into for-linus 2018-12-31 19:32:10 +05:30
Vinod Koul 68ded1dcd1 Merge branch 'topic/mtk' into for-linus 2018-12-31 19:31:59 +05:30