change the sw ctf setting to smu_v11_0_set_thermal_range()
since software_shutdown_temp shares the same definition and
name in all the smu11 project.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
guest vm gets 0xffffffff when reading RCC_DEV0_EPF0_STRAP0,
as a consequence, the rev_id and external_rev_id are wrong.
workaround it by hardcoding the rev_id to 0, which is the default value.
v2. add comment in the code
Signed-off-by: Tiecheng Zhou <Tiecheng.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There is a use case that link loss happens accidentally,
and we need to recover that link loss as soon as possible.
Under this circumstance, we will perform link training,
and try to recover the link that's just lost.
However, if link PHY is disabled before link training
happens, then DP display will never come back again.
Also, please note that dropping this disable_phy function
call won't break USB-C hotplug functionality.
(This line of code was firstly introduced associated with
a patch to fix USB-C hotplug issue)
[How]
Don't disable DP transmitter and its encoder before link
training happens, even if link loss is detected.
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SDMA edc counter registers were added in gfx edc counters
array. When querying gfx error counter in that array, there
is no way to differentiate sdma instance number for different
asic and then results to NULL pointer access when trying to
read sdma register base address for instances greater
than 2 on Vega20.
In addition, this also results to wrong gfx error counters
since it actually added sdma edc counters.
Therefore, sdma edc counter registers should be separated
from gfx edc counter regsiter array and only get initialized
when driver tries to enable sdma ras.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
move ras_late_init and ras_fini to sdma_ras_funcs table
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
invoke sdma query_ras_error_count to get sdma single
bit error count
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
query_ras_error_count function will be invoked to query
single bit error count detected in sdma ip block
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With default PSP FW loading
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ucodes for instances are from different location
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Do not ignore amdgpu_irq_add_id return value while registering
VMC page fault interrupt.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This can save users much troubles. As they do not
actually need to care whether swSMU or traditional
powerplay routine should be used.
V2: apply the fixes to vi.c and cik.c also
V3: squash in oops fix
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The SOC15_REG_OFFSET() macro needs to dereference adev->reg_offset[IP]
pointer, which is sometimes NULL when there are fewer than 8 sdma engines.
Avoid that by not initializing the array regardless.
v2: squash in warning fixes
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
UAPI Changes:
Cross-subsystem Changes:
- Convert simple panel bindings to a template.
Core Changes:
- Revert drm-bridge-state changes, it causes a dependency error
between drm and drm_kms_helper.
- Fix when disabling crc's.
- Assorted Kconfig fixes.
Driver Changes:
- Add ddc symlinks to more drivers.
- Fix chained bridge handling in exynos and vc4.
- More clock rate fixes in sun4i.
- Add support for AUO B116XAK01, GiantPlus GPM940B0, Sony ACX424AKP,
BOE NV140FHM-N49, Satoz SAT050AT40H12R2 and Sharp LS020B1DD01D panels.
- Assorted small bugfixes.
-----BEGIN PGP SIGNATURE-----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=P/VK
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2020-01-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.6:
UAPI Changes:
Cross-subsystem Changes:
- Convert simple panel bindings to a template.
Core Changes:
- Revert drm-bridge-state changes, it causes a dependency error
between drm and drm_kms_helper.
- Fix when disabling crc's.
- Assorted Kconfig fixes.
Driver Changes:
- Add ddc symlinks to more drivers.
- Fix chained bridge handling in exynos and vc4.
- More clock rate fixes in sun4i.
- Add support for AUO B116XAK01, GiantPlus GPM940B0, Sony ACX424AKP,
BOE NV140FHM-N49, Satoz SAT050AT40H12R2 and Sharp LS020B1DD01D panels.
- Assorted small bugfixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1e8d4944-68d7-0df3-f39b-31f6fba22a2a@linux.intel.com
[why]
Compilation error "undefined reference to `__udivdi3'" was
thrown on i386 architecture.
[how]
Use div_u64 for unsigned long division instead of a divide operator.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the parameter is the mst manager, not the port.
Reviewed-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
We need to minimally initialize the remote aux channel, e.g. the
crc work struct of remote aux to dump the sink's DPRX CRCs in MST
setup.
[how]
Add helper that only initializes the crc work struct of the remote
aux, hooke crc work queue to 'drm_dp_aux_crc_work'. Then call this
helper in DP MST port initialization.
This, plus David Francis' patch [1], fix the issue of MST remote
aux DPCD CRCs read.
[1] https://patchwork.kernel.org/patch/11217941/
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: David (Dingchen) Zhang <dingchen.zhang@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Whenever a connector on an MST network is attached, detached, or
undergoes a modeset, the DSC configs for each stream on that
topology will be recalculated. This can change their required
bandwidth, requiring a full reprogramming, as though a modeset
was performed, even if that stream did not change timing.
Therefore, whenever a crtc has drm_atomic_crtc_needs_modeset,
for each crtc that shares a MST topology with that stream and
supports DSC, add that crtc (and all affected connectors and
planes) to the atomic state and set mode_changed on its state
v2: Do this check only on Navi and before adding connectors
and planes on modesetting crtcs
v3: Call the drm_dp_mst_add_affected_dsc_crtcs() to update
all affected CRTCs
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Whenever a connector on an MST network is changed or
undergoes a modeset, the DSC configs for each stream on that
topology will be recalculated. This can change their required
bandwidth, requiring a full reprogramming, as though a modeset
was performed, even if that stream did not change timing.
[how]
Adding helper to trigger modesets on MST DSC connectors
by setting mode_changed flag on CRTCs in the same topology
as affected connector
v2: use drm_dp_mst_dsc_aux_for_port function to verify
if the port is DSC capable
v3: - added _must_check attribute
- removed topology manager check
- fix typos and indentations
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Since for DSC MST connector's PBN is claculated differently
due to compression, we have to recalculate both PBN and
VCPI slots for that connector.
[how]
The function iterates through all the active streams to
find, which have DSC enabled, then recalculates PBN for
it and calls drm_dp_helper_update_vcpi_slots_for_dsc to
update connector's VCPI slots.
v2: - use drm_dp_mst_atomic_enable_dsc per port to
enable/disable DSC
v3: - Iterate through connector states from the state passed
- On each connector state get stream from dc_state,
instead CRTC state
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If driver fails to update update VCPI allocation during
compute_mst_dsc_configs_for_state - fail the function
by return early.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If there is limited link bandwidth on a MST network,
it must be divided fairly between the streams on that network
Implement an algorithm to determine the correct DSC config
for each stream
The algorithm:
This
[ ] ( )
represents the range of bandwidths possible for a given stream.
The [] area represents the range of DSC configs, and the ()
represents no DSC. The bandwidth used increases from left to right.
First, try disabling DSC on all streams
[ ] (|)
[ ] (|)
Check this against the bandwidth limits of the link and each branch
(including each endpoint). If it passes, the job is done
Second, try maximum DSC compression on all streams
that support DSC
[| ] ( )
[| ] ( )
If this does not pass, then enabling this combination of streams
is impossible
Otherwise, divide the remaining bandwidth evenly amongst the streams
[ | ] ( )
[ | ] ( )
If one or more of the streams reach minimum compression, evenly
divide the reamining bandwidth amongst the remaining streams
[ |] ( )
[ |] ( )
[ | ] ( )
[ | ] ( )
If all streams can reach minimum compression, disable compression
greedily
[ |] ( )
[ |] ( )
[ ] (|)
Perform this algorithm on each full update, on each MST link
with at least one DSC stream on it
After the configs are computed, call
dcn20_add_dsc_to_stream_resource on each stream with DSC enabled.
It is only after all streams are created that we can know which
of them will need DSC.
Do all of this at the end of amdgpu atomic check. If it fails,
fail check; This combination of timings cannot be supported.
v2: Use drm_dp_mst_atomic_check to validate bw for certain dsc
configurations
v3: Use dc_dsc_policy structure to get min and max bpp rate
for DSC configuration
Acked-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Need to calculate VCPI slots differently for DSC
to take in account current link rate, link count
and FEC.
[how]
Add helper to get pbn_div from dc_link
Acked-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
drm_dp_mst_atomic_check_topology_state() should be renamed
to reflect more specific type of check. Since it is verifying
payload allocation limit it should be renamed into
drm_dp_mst_atomic_check_vcpi_alloc_limit()
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Adding PBN attribute to drm_dp_vcpi_allocation structure to
keep track of how much bandwidth each Port requires.
Adding drm_dp_mst_atomic_check_bw_limit to verify that
state's bandwidth needs doesn't exceed available bandwidth.
The funtion is called in drm_dp_mst_atomic_check after
drm_dp_mst_atomic_check_topology_state to fully verify that
the proposed topology is supported.
v2: Fixing some typos and indenting
v3: Return correct error enums if no bw space available
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adding a helper function to be called by
drivers outside of DRM to enable DSC on
the MST ports.
Function is called to recalculate VCPI allocation
if DSC is enabled and raise the DSC flag to enable.
In case of disabling DSC the flag is set to false
and recalculation of VCPI slots is expected to be done
in encoder's atomic_check.
v2: squash separate functions into one and call it per
port
v3: Fix comment typos
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
For DSC case we cannot use topology manager's PBN divider
variable. The default divider does not take FEC into account.
Therefore the driver has to calculate its own divider based
on the link rate and lane count its handling, as it is hw specific.
[how]
Pass pbn_div as an argument, which is used if its more than
zero, otherwise default topology manager's pbn_div will be used.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rework the dm_helpers_write_dsc_enable callback to
handle the MST case.
Use the cached dsc_aux field.
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During MST mode enumeration, if a new dc_sink is created,
populate it with dsc caps as appropriate.
Use drm_dp_mst_dsc_aux_for_port to get the raw caps,
then parse them onto dc_sink with dc_dsc_parse_dsc_dpcd.
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For DSC MST, sometimes monitors would break out
in full-screen static. The issue traced back to the
PPS generation code, where these variables were being used
uninitialized and were picking up garbage.
memset to 0 to avoid this
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Synaptics DP1.4 hubs (BRANCH_ID 0x90CC24) do not
support virtual DPCD registers, but do support DSC.
The DSC caps can be read from the physical aux,
like in SST DSC. These hubs have many different
DEVICE_IDs. Add a new quirk to detect this case.
v2: Fix error when checking return of drm_dp_read_desc
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add drm_dp_mst_dsc_aux_for_port. To enable DSC, the DSC_ENABLED
register might have to be written on the leaf port's DPCD,
its parent's DPCD, or the MST manager's DPCD. This function
finds the correct aux for the job.
As part of this, add drm_dp_mst_is_virtual_dpcd. Virtual DPCD
is a DP feature new in DP v1.4, which exposes certain DPCD
registers on virtual ports.
v2: Remember to unlock mutex on all paths
v3: Refactor to match coding style and increase brevity
v4: - Check DSC capable MST sink connected directly to the device.
- Check branch's port_parent to be set
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This field on drm_dp_mst_branch was never filled
It is initialized to zero when the port is kzallocced.
When a port is added to the list, increment num_ports,
and when a port is removed from the list, decrement num_ports.
v2: remember to decrement on port removal
v3: don't explicitly init to 0
v4: move decrement of num_ports to unlink_port function
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of having drm_dp_dpcd_read/write and
drm_dp_mst_dpcd_read/write as entry points into the
aux code, have drm_dp_dpcd_read/write handle both.
This means that DRM drivers can make MST DPCD read/writes.
v2: Fix spacing
v3: Dump dpcd access on MST read/writes
v4: Fix calling wrong function on DPCD write
v5: delete deprecated include of drmP.h
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As of DP1.4, ENUM_PATH_RESOURCES returns a bit indicating
if FEC can be supported up to that point in the MST network.
The bit is the first byte of the ENUM_PATH_RESOURCES ack reply,
bottom-most bit (refer to section 2.11.9.4 of DP standard,
v1.4)
That value is needed for FEC and DSC support
Store it on drm_dp_mst_port
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With DSC, bpp can be fractional in multiples of 1/16.
Change drm_dp_calc_pbn_mode to reflect this, adding a new
parameter bool dsc. When this parameter is true, treat the
bpp parameter as having units not of bits per pixel, but
1/16 of a bit per pixel
v2: Don't add separate function for this
v3: In the equation divide bpp by 16 as it is expected
not to leave any remainder
v4: Added DSC test parameters for selftest
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use filep->private_data to store a pointer to the kfd_process data
structure. Take an extra reference for that, which gets released in
the kfd_release callback. Check that the process calling kfd_ioctl
is the same that opened the file descriptor. Return -EBADF if it's
not, so that this error can be distinguished in user mode.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The Allwinner SoCs have a display engine composed of several controllers
assembled differently depending on the SoC, the number and type of output
they have, and the additional features they provide. A number of those are
supported in Linux, with the matching bindings.
Now that we have the DT validation in place, let's split into separate file
and convert the device tree bindings for those controllers to schemas.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200103152801.47254-1-maxime@cerno.tech
Add bindings for the BOE NV140FHM-N49 14" 1920x1080 panel.
The panel is used by the pine64 Pinebook Pro.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Tobias Schramm <t.schramm@manjaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109140742.GA12940@ravnborg.org
The Sony ACX424AKP is a command/videomode DSI panel for
mobile devices. It is used on the ST-Ericsson HREF520
reference design. We support video mode by default, but
it is possible to switch the panel into command mode
by using the bool property "dsi-command-mode".
Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109072815.334867-1-linus.walleij@linaro.org
The udl driver for DisplayLink devices depends on support for host-side
USB controllers, which is enabled with CONFIG_USB. Plain USB support as
given by CONFIG_USB_SUPPORT is not sufficient.
This patch changes dependencies for udl to depend on CONFIG_USB, instead
of CONFIG_USB_SUPPORT. Users will have to enable CONFIG_USB and select a
USB host controller. With this change udl dependencies work the same way
as dependencies for PCI drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106141016.9562-1-tzimmermann@suse.de
Kenneth Feng