As we're hold a ref on looking up the extent map, we need to drop the ref
before returning to callers.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
The performance was slowed down sometimes when we ran sysbench to measure
the performance of the sequential buffered write by 2 or more threads.
It was because the write order of the test threads might be confused
by the task scheduler, and the coming write would be beyond the end of
the file, in this case, we need insert dummy file extents and create
a hole for the area we skip. But in order to avoid the ongoing ordered
extents which are in the area, we need wait for them. Unfortunately,
the current code doesn't check if there are ordered extents in the area
or not, try to find and flush the dirty pages directly, but in fact,
there is no dirty page in that area, this step of the current code is
unnecessary, and just wastes time. Sometimes, it would increase
the contention of some locks, and makes the performance slow down suddenly.
So we remove the ordered extent flush function before the check, and flush
the dirty pages and wait for the ordered extents only when we find them.
According to my test, we got 1-2 times of the performance regression when
we ran the test by 10 times before applying this patch. After applying
this patch, the regression went away.
Test Environment:
CPU: 1CPU * 4Cores
Memory: 6GB
Partition: 20GB
Test Command:
# sysbench --test=fileio --file-total-size=16G --file-test-mode=seqwr \
> --num-threads=512 --file-block-size=16384 --max-time=60 --max-requests=0 run
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
When we did space balance and snapshot creation at the same time, we might
meet the following oops:
kernel BUG at fs/btrfs/inode.c:3038!
[SNIP]
Call Trace:
[<ffffffffa0411ec7>] btrfs_orphan_cleanup+0x293/0x407 [btrfs]
[<ffffffffa042dc45>] btrfs_mksubvol.isra.28+0x259/0x373 [btrfs]
[<ffffffffa042de85>] btrfs_ioctl_snap_create_transid+0x126/0x156 [btrfs]
[<ffffffffa042dff1>] btrfs_ioctl_snap_create_v2+0xd0/0x121 [btrfs]
[<ffffffffa0430b2c>] btrfs_ioctl+0x414/0x1854 [btrfs]
[<ffffffff813b60b7>] ? __do_page_fault+0x305/0x379
[<ffffffff811215a9>] vfs_ioctl+0x1d/0x39
[<ffffffff81121d7c>] do_vfs_ioctl+0x32d/0x3e2
[<ffffffff81057fe7>] ? finish_task_switch+0x80/0xb8
[<ffffffff81121e88>] SyS_ioctl+0x57/0x83
[<ffffffff813b39ff>] ? do_device_not_available+0x12/0x14
[<ffffffff813b99c2>] system_call_fastpath+0x16/0x1b
[SNIP]
RIP [<ffffffffa040da40>] btrfs_orphan_add+0xc3/0x126 [btrfs]
The reason of the problem is that the relocation root creation stole
the reserved space, which was reserved for orphan item deletion.
There are several ways to fix this problem, one is to increasing
the reserved space size of the space balace, and then we can use
that space to create the relocation tree for each fs/file trees.
But it is hard to calculate the suitable size because we doesn't
know how many fs/file trees we need relocate.
We fixed this problem by reserving the space for relocation root creation
actively since the space it need is very small (one tree block, used for
root node copy), then we use that reserved space to create the
relocation tree. If we don't reserve space for relocation tree creation,
we will use the reserved space of the balance.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Remove unused parameter, 'eb'. Unused since introduction in
5f39d397df
Updated to be rebased against current upstream and correct diff supplied this time!
Signed-off-by: Ross Kirk <ross.kirk@gmail.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
I was noticing the slab redzone stuff going off every once and a while during
transaction aborts. This was caused by two things
1) We would walk the pending snapshots and set their error to -ECANCELED. We
don't need to do this, the snapshot stuff waits for a transaction commit and if
there is a problem we just free our pending snapshot object and exit. Doing
this was causing us to touch the pending snapshot object after the thing had
already been freed.
2) We were freeing the transaction manually with wanton disregard for it's
use_count reference counter. To fix this I cleaned up the transaction freeing
loop to either wait for the transaction commit to finish if it was in the middle
of that (since it will be cleaned and freed up there) or to do the cleanup
oursevles.
I also moved the global "kill all things dirty everywhere" stuff outside of the
transaction cleanup loop since that only needs to be done once. With this patch
I'm no longer seeing slab corruption because of use after frees. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Noticed this when forcing errors to happen during delayed ref running. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
During transaction cleanup after an abort we are just removing roots from the
ordered roots list which is incorrect. We have a BUG_ON() to make sure that the
root is still part of the ordered roots list when we put our ordered extent
which we were tripping in this case. So do like we do everywhere else and just
move it to the tail of the ordered roots list and allow the normal cleanup to
take care of stuff. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
If we abort not during a transaction commit we won't clean up anything until we
unmount. Unfortunately if we abort in the middle of writing out an ordered
extent we won't clean it up and if somebody is waiting on that ordered extent
they will wait forever. To fix this just make the transaction kthread call the
cleanup transaction stuff if it notices theres an error, and make
btrfs_end_transaction wake up the transaction kthread if there is an error.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
I've been testing our error paths and I was tripping the BUG_ON() in
drop_outstanding_extent because our outstanding_extents is 0 for space cache
inodes. This is because we don't reserve metadata space for these inodes since
we depend on the global block reserve for our space. To fix this we need to
make sure the DO_ACCOUNTING stuff doesn't actually call release_metadata for
space cache inodes. With this patch I'm no longer panicing. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
If we abort a transaction in the middle of a commit we weren't undoing the
intwrite locking. This patch fixes that problem.
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
A user reported a problem where they were getting csum errors when running a
balance and running systemd's journal. This is because systemd is awesome and
fallocate()'s its log space and writes into it. Unfortunately we assume that
when we read in all the csums for an extent that they are sequential starting at
the bytenr we care about. This obviously isn't the case for prealloc extents,
where we could have written to the middle of the prealloc extent only, which
means the csum would be for the bytenr in the middle of our range and not the
front of our range. Fix this by offsetting the new bytenr we are logging to
based on the original bytenr the csum was for. With this patch I no longer see
the csum errors I was seeing. Thanks,
Cc: stable@vger.kernel.org
Reported-by: Chris Murphy <lists@colorremedies.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
In extent-tree.c:btrfs_write_dirty_block_groups(), if the call to
write_one_cache_group() failed, we would return without putting
the block group first.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Currently the fs sync function (super.c:btrfs_sync_fs()) doesn't
wait for delayed work to finish before returning success to the
caller. This change fixes this, ensuring that there's no data loss
if a power failure happens right after fs sync returns success to
the caller and before the next commit happens.
Steps to reproduce the data loss issue:
$ mkfs.btrfs -f /dev/sdb3
$ mount /dev/sdb3 /mnt/btrfs
$ perl -e '$d = ("\x41" x 6001); open($f,">","/mnt/btrfs/foobar"); print $f $d; close($f);' && btrfs fi sync /mnt/btrfs
Right after the btrfs fi sync command (a second or 2 for example), power
off the machine and reboot it. The file will be empty, as it can be verified
after mounting the filesystem and through btrfs-debug-tree:
$ btrfs-debug-tree /dev/sdb3 | egrep '\(257 INODE_ITEM 0\) itemoff' -B 3 -A 8
item 3 key (256 DIR_INDEX 2) itemoff 3751 itemsize 36
location key (257 INODE_ITEM 0) type FILE
namelen 6 datalen 0 name: foobar
item 4 key (257 INODE_ITEM 0) itemoff 3591 itemsize 160
inode generation 7 transid 7 size 0 block group 0 mode 100644 links 1
item 5 key (257 INODE_REF 256) itemoff 3575 itemsize 16
inode ref index 2 namelen 6 name: foobar
checksum tree key (CSUM_TREE ROOT_ITEM 0)
leaf 29429760 items 0 free space 3995 generation 7 owner 7
fs uuid 6192815c-af2a-4b75-b3db-a959ffb6166e
chunk uuid b529c44b-938c-4d3d-910a-013b4700bcae
uuid tree key (UUID_TREE ROOT_ITEM 0)
After this patch, the data loss no longer happens after a power failure and
btrfs-debug-tree shows:
$ btrfs-debug-tree /dev/sdb3 | egrep '\(257 INODE_ITEM 0\) itemoff' -B 3 -A 8
item 3 key (256 DIR_INDEX 2) itemoff 3751 itemsize 36
location key (257 INODE_ITEM 0) type FILE
namelen 6 datalen 0 name: foobar
item 4 key (257 INODE_ITEM 0) itemoff 3591 itemsize 160
inode generation 6 transid 6 size 6001 block group 0 mode 100644 links 1
item 5 key (257 INODE_REF 256) itemoff 3575 itemsize 16
inode ref index 2 namelen 6 name: foobar
item 6 key (257 EXTENT_DATA 0) itemoff 3522 itemsize 53
extent data disk byte 12845056 nr 8192
extent data offset 0 nr 8192 ram 8192
extent compression 0
checksum tree key (CSUM_TREE ROOT_ITEM 0)
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
In inode.c:btrfs_orphan_add() if we failed to insert the orphan
item, we would return without decrementing the orphan count that
we just incremented before attempting the insertion, leaving the
orphan inode count wrong.
In inode.c:btrfs_orphan_del(), we were decrementing the inode
orphan count if the bit BTRFS_INODE_ORPHAN_META_RESERVED was set,
which is logically wrong because it should be decremented if the
bit BTRFS_INODE_HAS_ORPHAN_ITEM was set - after all we increment
the count when we set the bit BTRFS_INODE_HAS_ORPHAN_ITEM elsewhere.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Similar to ocfs2, btrfs also supports that extents can be shared by
different inodes, and there are some userspace tools requesting
for this kind of 'space shared infomation'.[1]
ocfs2 uses flag FIEMAP_EXTENT_SHARED, so does btrfs.
[1]: http://thr3ads.net/ocfs2-devel/2010/09/489052-PATCH-3-3-shared-du-using-fiemap-to-figure-up-the-shared-extents-per-file-and-the-footprint-in
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Not used for anything, and removing it avoids caller's need to
allocate a path structure.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
We're doing a unnecessary extra lookup of the ino cache's
inode when we already have it (and holding a reference)
during the process of saving the ino cache contents to disk.
Therefore remove this extra lookup.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
While running some snashot aware defrag tests I noticed I was panicing every
once and a while in key_search. This is because of the optimization that says
if we find a key at slot 0 it will be at slot 0 all the way down the rest of the
tree. This isn't the case for btrfs_search_old_slot since it will likely replay
changes to a buffer if something has changed since we took our sequence number.
So short circuit this optimization by setting prev_cmp to -1 every time we call
key_search so we will do our normal binary search. With this patch I am no
longer seeing the panics I was seeing before. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
While looking at somebodys corruption I became completely convinced that
btrfs_split_item was broken, so I wrote this test to verify that it was working
as it was supposed to. Thankfully it appears to be working as intended, so just
add this test to make sure nobody breaks it in the future. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Remove unused eb parameter from btrfs_item_nr
Signed-off-by: Ross Kirk <ross.kirk@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
It is not necessary to store the NULL byte in a symlink inline file
extent. There's currently no code that requires the NULL byte to be
present in the extent. This change also doesn't break file format
compatibility nor the send/receive feature.
The VFS also doesn't need the NULL byte to be present in the extent,
as it reads up to inode->i_size bytes (which already excluded the NULL
byte) and sets the NULL byte for us (in fs/namei.c:page_getlink()).
So with this change we save 1 byte per symlink file extent (which is
always inlined in the btree leaf) without losing backward and forward
compatibility.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
The fact that btrfs_root_refs() returned 0 for the tree_root caused
bugs in the past, therefore it is set to 1 with this patch and
(hopefully) all affected code is adapted to this change.
I verified this change by temporarily adding WARN_ON() checks
everywhere where btrfs_root_refs() is used, checking whether the
logic of the code is changed by btrfs_root_refs() returning 1
instead of 0 for root->root_key.objectid == BTRFS_ROOT_TREE_OBJECTID.
With these added checks, I ran the xfstests './check -g auto'.
The two roots chunk_root and log_root_tree that are only referenced
by the superblock and the log_roots below the log_root_tree still
have btrfs_root_refs() == 0, only the tree_root is changed.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Pull scheduler changes from Ingo Molnar:
"The main changes in this cycle are:
- (much) improved CONFIG_NUMA_BALANCING support from Mel Gorman, Rik
van Riel, Peter Zijlstra et al. Yay!
- optimize preemption counter handling: merge the NEED_RESCHED flag
into the preempt_count variable, by Peter Zijlstra.
- wait.h fixes and code reorganization from Peter Zijlstra
- cfs_bandwidth fixes from Ben Segall
- SMP load-balancer cleanups from Peter Zijstra
- idle balancer improvements from Jason Low
- other fixes and cleanups"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits)
ftrace, sched: Add TRACE_FLAG_PREEMPT_RESCHED
stop_machine: Fix race between stop_two_cpus() and stop_cpus()
sched: Remove unnecessary iteration over sched domains to update nr_busy_cpus
sched: Fix asymmetric scheduling for POWER7
sched: Move completion code from core.c to completion.c
sched: Move wait code from core.c to wait.c
sched: Move wait.c into kernel/sched/
sched/wait: Fix __wait_event_interruptible_lock_irq_timeout()
sched: Avoid throttle_cfs_rq() racing with period_timer stopping
sched: Guarantee new group-entities always have weight
sched: Fix hrtimer_cancel()/rq->lock deadlock
sched: Fix cfs_bandwidth misuse of hrtimer_expires_remaining
sched: Fix race on toggling cfs_bandwidth_used
sched: Remove extra put_online_cpus() inside sched_setaffinity()
sched/rt: Fix task_tick_rt() comment
sched/wait: Fix build breakage
sched/wait: Introduce prepare_to_wait_event()
sched/wait: Add ___wait_cond_timeout() to wait_event*_timeout() too
sched: Remove get_online_cpus() usage
sched: Fix race in migrate_swap_stop()
...
A bit of cleanup plus some gratuitous variable renaming. I think using
structures instead of numeric offsets makes this code much more
understandable.
Also added a comment about current time range expected by
the server.
Acked-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Opens on current cifs/smb2/smb3 mounts with O_DIRECT flag fail
even when caching is disabled on the mount. This was
reported by those running SMB2 benchmarks who need to
be able to pass O_DIRECT on many of their open calls to
reduce caching effects, but would also be needed by other
applications.
When mounting with forcedirectio ("cache=none") cifs and smb2/smb3
do not go through the page cache and thus opens with O_DIRECT flag
should work (when posix extensions are negotiated we even are
able to send the flag to the server). This patch fixes that
in a simple way.
The 9P client has a similar situation (caching is often disabled)
and takes the same approach to O_DIRECT support ie works if caching
disabled, but if client caching enabled it fails with EINVAL.
A followon idea for a future patch as Pavel noted, could
be that files opened with O_DIRECT could cause us to change
inode->i_fop on the fly from
cifs_file_strict_ops
to
cifs_file_direct_ops
which would allow us to support this on non-forcedirectio mounts
(cache=strict and cache=loose) as well.
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
Andrey reported that he was seeing cifs.ko spam the logs with messages
like this:
CIFS VFS: Unexpected lookup error -26
He was listing the root directory of a server and hitting an error when
trying to QUERY_PATH_INFO against hiberfil.sys and pagefile.sys. The
right fix would be to switch the lookup code over to using FIND_FIRST,
but until then we really don't need to report this at a level of
KERN_ERR. Convert this message over to FYI level.
Reported-by: "Andrey Shernyukov" <andreysh@nioch.nsc.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Sometimes, the server will report an error that basically indicates
that it's running out of resources. These include these under SMB1:
NT_STATUS_NO_MEMORY
NT_STATUS_SECTION_TOO_BIG
NT_STATUS_TOO_MANY_PAGING_FILES
...and this one under SMB2:
STATUS_NO_MEMORY
Currently, this gets mapped to ENOMEM by the client, but that's
confusing as an ENOMEM error is typically an indicator that the
client is out of memory.
Change these errors to instead map to EREMOTEIO to indicate that
the problem is actually server-side and not on the client.
Reported-by: "ISHIKAWA,chiaki" <ishikawa@yk.rim.or.jp>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Now we treat any reparse point as a symbolic link and map it to a Unix
one that is not true in a common case due to many reparse point types
supported by SMB servers.
Distinguish reparse point types into two groups:
1) that can be accessed directly through a reparse point
(junctions, deduplicated files, NFS symlinks);
2) that need to be processed manually (Windows symbolic links, DFS);
and map only Windows symbolic links to Unix ones.
Cc: <stable@vger.kernel.org>
Acked-by: Jeff Layton <jlayton@redhat.com>
Reported-and-tested-by: Joao Correia <joaomiguelcorreia@gmail.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
o Changes from v1
Use find_next(_zero)_bit suggested by jg.kim
When f2fs issues discard command, if segment is contiguous,
let's issue more large segment to gather adjacent segments.
** blktrace **
179,1 0 5859 42.619023770 971 C D 131072 + 2097152 [0]
179,1 0 33665 108.840475468 971 C D 2228224 + 2494464 [0]
179,1 0 33671 109.131616427 971 C D 14909440 + 344064 [0]
179,1 0 33677 109.137100677 971 C D 15261696 + 4096 [0]
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
some clean ups and some patches to use the new generic lru list
code. There is still plenty of scope for some further changes in
due course - faster lookups of quota structures is very much
on the todo list. Also, a start has been made towards the more tricky
issue of using the generic lru code with glocks, but that will
have to be completed in a subsequent merge window.
The other, more minor feature, is that there have been a number of
performance patches which relate to block allocation. In particular
they will improve performance when the disk is nearly full.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=qwXe
-----END PGP SIGNATURE-----
Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw
Pull gfs2 updates from Steven Whitehouse:
"The main feature of interest this time is quota updates. There are
some clean ups and some patches to use the new generic lru list code.
There is still plenty of scope for some further changes in due course -
faster lookups of quota structures is very much on the todo list.
Also, a start has been made towards the more tricky issue of using the
generic lru code with glocks, but that will have to be completed in a
subsequent merge window.
The other, more minor feature, is that there have been a number of
performance patches which relate to block allocation. In particular
they will improve performance when the disk is nearly full"
* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw:
GFS2: Use generic list_lru for quota
GFS2: Rename quota qd_lru_lock qd_lock
GFS2: Use reflink for quota data cache
GFS2: Use lockref for glocks
GFS2: Protect quota sync generation
GFS2: Inline qd_trylock into gfs2_quota_unlock
GFS2: Make two similar quota code fragments into a function
GFS2: Remove obsolete quota tunable
GFS2: Move gfs2_icbit_munge into quota.c
GFS2: Speed up starting point selection for block allocation
GFS2: Add allocation parameters structure
GFS2: Clean up reservation removal
GFS2: fix dentry leaks
GFS2: new function gfs2_rbm_incr
GFS2: Introduce rbm field bii
GFS2: Do not reset flags on active reservations
GFS2: introduce bi_blocks for optimization
GFS2: optimize rbm_from_block wrt bi_start
GFS2: d_splice_alias() can't return error
NFSv4 uses leases to guarantee that clients can cache metadata as well
as data.
Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Cc: David Howells <dhowells@redhat.com>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: Dustin Kirkland <dustin.kirkland@gazzang.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We'll need the same logic for rename and link.
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We need to break delegations on any operation that changes the set of
links pointing to an inode. Start with unlink.
Such operations also hold the i_mutex on a parent directory. Breaking a
delegation may require waiting for a timeout (by default 90 seconds) in
the case of a unresponsive NFS client. To avoid blocking all directory
operations, we therefore drop locks before waiting for the delegation.
The logic then looks like:
acquire locks
...
test for delegation; if found:
take reference on inode
release locks
wait for delegation break
drop reference on inode
retry
It is possible this could never terminate. (Even if we take precautions
to prevent another delegation being acquired on the same inode, we could
get a different inode on each retry.) But this seems very unlikely.
The initial test for a delegation happens after the lock on the target
inode is acquired, but the directory inode may have been acquired
further up the call stack. We therefore add a "struct inode **"
argument to any intervening functions, which we use to pass the inode
back up to the caller in the case it needs a delegation synchronously
broken.
Cc: David Howells <dhowells@redhat.com>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: Dustin Kirkland <dustin.kirkland@gazzang.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We'll be using dentry->d_inode in one more place.
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Implement NFSv4 delegations at the vfs level using the new FL_DELEG lock
type.
Note nfsd is the only delegation user and is only using read
delegations. Warn on any attempt to set a write delegation for now.
We'll come back to that case later.
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
For now FL_DELEG is just a synonym for FL_LEASE. So this patch doesn't
change behavior.
Next we'll modify break_lease to treat FL_DELEG leases differently, to
account for the fact that NFSv4 delegations should be broken in more
situations than Windows oplocks.
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
A read delegation is used by NFSv4 as a guarantee that a client can
perform local read opens without informing the server.
The open operation takes the last component of the pathname as an
argument, thus is also a lookup operation, and giving the client the
above guarantee means informing the client before we allow anything that
would change the set of names pointing to the inode.
Therefore, we need to break delegations on rename, link, and unlink.
We also need to prevent new delegations from being acquired while one of
these operations is in progress.
We could add some completely new locking for that purpose, but it's
simpler to use the i_mutex, since that's already taken by all the
operations we care about.
The single exception is rename. So, modify rename to take the i_mutex
on the file that is being renamed.
Also fix up lockdep and Documentation/filesystems/directory-locking to
reflect the change.
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
I_MUTEX_QUOTA is now just being used whenever we want to lock two
non-directories. So the name isn't right. I_MUTEX_NONDIR2 isn't
especially elegant but it's the best I could think of.
Also fix some outdated documentation.
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reserve I_MUTEX_PARENT and I_MUTEX_CHILD for locking of actual
directories.
(Also I_MUTEX_QUOTA isn't really a meaningful name for this locking
class any more; fixed in a later patch.)
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We want to do this elsewhere as well.
Also catch any attempts to use it for directories (where this ordering
would conflict with ancestor-first directory ordering in lock_rename).
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Dave Chinner <david@fromorbit.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Suppose we're given the filehandle for a directory whose closest
ancestor in the dcache is its Nth ancestor.
The main loop in reconnect_path searches for an IS_ROOT ancestor of
target_dir, reconnects that ancestor to its parent, then recommences the
search for an IS_ROOT ancestor from target_dir.
This behavior is quadratic in N. And there's really no need to restart
the search from target_dir each time: once a directory has been looked
up, it won't become IS_ROOT again. So instead of starting from
target_dir each time, we can continue where we left off.
This simplifies the code and improves performance on very deep directory
heirachies. (I can't think of any reason anyone should need heirarchies
a hundred or more deep, but the performance improvement may be valuable
if only to limit damage in case of abuse.)
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Replace another unhelpful acronym.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Also replace 3 easily-confused three-letter acronyms by more helpful
variable names.
Just cleanup, no change in functionality, with one exception: the
dentry_connected() check in the "out_reconnected" case will now only
check the ancestors of the current dentry instead of checking all the
way from target_dir. Since we've already verified connectivity up to
this dentry, that should be sufficient.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Note this counter is now being set to 0 on every pass through the loop,
so it no longer serves any useful purpose.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
There are two places here where we could race with a rename or remove:
- We could find the parent, but then be removed or renamed away
from that parent directory before finding our name in that
directory.
- We could find the parent, and find our name in that parent,
but then be renamed or removed before we look ourselves up by
that name in that parent.
In both cases the concurrent rename or remove will take care of
reconnecting the directory that we're currently examining. Our target
directory should then also be connected. Check this and clear
DISCONNECTED in these cases instead of looping around again.
Note: we *do* need to check that this actually happened if we want to be
robust in the face of corrupted filesystems: a corrupted filesystem
could just return a completely wrong parent, and we want to fail with an
error in that case before starting to clear DISCONNECTED on
non-DISCONNECTED filesystems.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Once we've found any connected parent, we know all our parents are
connected--that's true even if there's a concurrent rename. May as well
clear them all at once and be done with it.
Reviewed-by: Cristoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This would indicate a nasty bug in the dcache and has never triggered in
the past 10 years as far as I know.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The DCACHE_NEED_LOOKUP case referred to here was removed with
39e3c9553f "vfs: remove
DCACHE_NEED_LOOKUP".
There are only four real_lookup() callers and all of them pass in an
unhashed dentry just returned from d_alloc.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
DCACHE_DISCONNECTED should not be cleared until we're sure the dentry is
connected all the way up to the root of the filesystem. It *shouldn't*
be cleared as soon as the dentry is connected to a parent. That will
cause bugs at least on exportable filesystems.
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
I can't for the life of me see any reason why anyone should care whether
a dentry that is never hooked into the dentry cache would need
DCACHE_DISCONNECTED set.
This originates from 4b936885ab "fs:
improve scalability of pseudo filesystems", which probably just made the
false assumption the DCACHE_DISCONNECTED was meant to be set on anything
not connected to a parent somehow.
So this is just confusing. Ideally the only uses of DCACHE_DISCONNECTED
would be in the filehandle-lookup code, which needs it to ensure
dentries are connected into the dentry tree before use.
I left d_alloc_pseudo there even though it's now equivalent to
__d_alloc(), just on the theory the name is better documentation of its
intended use outside dcache.c.
Cc: Nick Piggin <npiggin@kernel.dk>
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Every hashed dentry is either hashed in the dentry_hashtable, or a
superblock's s_anon list.
__d_drop() assumes it can determine which is the case by checking
DCACHE_DISCONNECTED; this is not true.
It is true that when DCACHE_DISCONNECTED is cleared, the dentry is not
only hashed on dentry_hashtable, but is fully connected to its parents
back to the root.
But the converse is *not* true: fs/exportfs/expfs.c:reconnect_path()
attempts to connect a directory (found by filehandle lookup) back to
root by ascending to parents and performing lookups one at a time. It
does not clear DCACHE_DISCONNECTED until it's done, and that is not at
all an atomic process.
In particular, it is possible for DCACHE_DISCONNECTED to be set on a
dentry which is hashed on the dentry_hashtable.
Instead, use IS_ROOT() to check which hash chain a dentry is on. This
*does* work:
Dentries are hashed only by:
- d_obtain_alias, which adds an IS_ROOT() dentry to sb_anon.
- __d_rehash, called by _d_rehash: hashes to the dentry's
parent, and all callers of _d_rehash appear to have d_parent
set to a "real" parent.
- __d_rehash, called by __d_move: rehashes the moved dentry to
hash chain determined by target, and assigns target's d_parent
to its d_parent, before dropping the dentry's d_lock.
Therefore I believe it's safe for a holder of a dentry's d_lock to
assume that it is hashed on sb_anon if and only if IS_ROOT(dentry) is
true.
I believe the incorrect assumption about DCACHE_DISCONNECTED was
originally introduced by ceb5bdc2d2 "fs: dcache per-bucket dcache hash
locking".
Also add a comment while we're here.
Cc: Nick Piggin <npiggin@kernel.dk>
Acked-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Symptoms were spurious -ENOENTs on stat of an NFS filesystem from a
32-bit NFS server exporting a very large XFS filesystem, when the
server's cache is cold (so the inodes in question are not in cache).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reported-by: Trevor Cordes <trevor@tecnopolis.ca>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The filehandle lookup code wants this version of getattr.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Put a type field into struct dentry::d_flags to indicate if the dentry is one
of the following types that relate particularly to pathwalk:
Miss (negative dentry)
Directory
"Automount" directory (defective - no i_op->lookup())
Symlink
Other (regular, socket, fifo, device)
The type field is set to one of the first five types on a dentry by calls to
__d_instantiate() and d_obtain_alias() from information in the inode (if one is
given).
The type is cleared by dentry_unlink_inode() when it reconstitutes an existing
dentry as a negative dentry.
Accessors provided are:
d_set_type(dentry, type)
d_is_directory(dentry)
d_is_autodir(dentry)
d_is_symlink(dentry)
d_is_file(dentry)
d_is_negative(dentry)
d_is_positive(dentry)
A bunch of checks in pathname resolution switched to those.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Don't abuse anon_inodes.c to host private files needed by aio;
we can bloody well declare a mini-fs of our own instead of
patching up what anon_inodes can create for us.
Tested-by: Benjamin LaHaise <bcrl@kvack.org>
Acked-by: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... and deal with short writes properly - the output might be to pipe, after
all; as it is, e.g. no-MMU case of elf_fdpic coredump can write a whole lot
more than a page worth of data at one call.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
dump_write() analog, takes core_dump_params instead of file,
keeps track of the amount written in cprm->written and checks for
cprm->limit. Start using it in binfmt_elf.c...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The only thing we need it for is alt-sysrq-r (emergency remount r/o)
and these days we can do just as well without going through the
list of files.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* RCU-delayed freeing of vfsmounts
* vfsmount_lock replaced with a seqlock (mount_lock)
* sequence number from mount_lock is stored in nameidata->m_seq and
used when we exit RCU mode
* new vfsmount flag - MNT_SYNC_UMOUNT. Set by umount_tree() when its
caller knows that vfsmount will have no surviving references.
* synchronize_rcu() done between unlocking namespace_sem in namespace_unlock()
and doing pending mntput().
* new helper: legitimize_mnt(mnt, seq). Checks the mount_lock sequence
number against seq, then grabs reference to mnt. Then it rechecks mount_lock
again to close the race and either returns success or drops the reference it
has acquired. The subtle point is that in case of MNT_SYNC_UMOUNT we can
simply decrement the refcount and sod off - aforementioned synchronize_rcu()
makes sure that final mntput() won't come until we leave RCU mode. We need
that, since we don't want to end up with some lazy pathwalk racing with
umount() and stealing the final mntput() from it - caller of umount() may
expect it to return only once the fs is shut down and we don't want to break
that. In other cases (i.e. with MNT_SYNC_UMOUNT absent) we have to do
full-blown mntput() in case of mount_lock sequence number mismatch happening
just as we'd grabbed the reference, but in those cases we won't be stealing
the final mntput() from anything that would care.
* mntput_no_expire() doesn't lock anything on the fast path now. Incidentally,
SMP and UP cases are handled the same way - no ifdefs there.
* normal pathname resolution does *not* do any writes to mount_lock. It does,
of course, bump the refcounts of vfsmount and dentry in the very end, but that's
it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Someone cut and pasted md's md_trim_bio() into xen-blkfront.c. Come on,
we should know better than this.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Neil Brown <neilb@suse.de>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__get_cpu_var() is used for multiple purposes in the kernel source. One of
them is address calculation via the form &__get_cpu_var(x). This calculates
the address for the instance of the percpu variable of the current processor
based on an offset.
Other use cases are for storing and retrieving data from the current
processors percpu area. __get_cpu_var() can be used as an lvalue when
writing data or on the right side of an assignment.
__get_cpu_var() is defined as :
#define __get_cpu_var(var) (*this_cpu_ptr(&(var)))
__get_cpu_var() always only does an address determination. However, store
and retrieve operations could use a segment prefix (or global register on
other platforms) to avoid the address calculation.
this_cpu_write() and this_cpu_read() can directly take an offset into a
percpu area and use optimized assembly code to read and write per cpu
variables.
This patch converts __get_cpu_var into either an explicit address
calculation using this_cpu_ptr() or into a use of this_cpu operations that
use the offset. Thereby address calculations are avoided and less registers
are used when code is generated.
At the end of the patch set all uses of __get_cpu_var have been removed so
the macro is removed too.
The patch set includes passes over all arches as well. Once these operations
are used throughout then specialized macros can be defined in non -x86
arches as well in order to optimize per cpu access by f.e. using a global
register that may be set to the per cpu base.
Transformations done to __get_cpu_var()
1. Determine the address of the percpu instance of the current processor.
DEFINE_PER_CPU(int, y);
int *x = &__get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(&y);
2. Same as #1 but this time an array structure is involved.
DEFINE_PER_CPU(int, y[20]);
int *x = __get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(y);
3. Retrieve the content of the current processors instance of a per cpu
variable.
DEFINE_PER_CPU(int, y);
int x = __get_cpu_var(y)
Converts to
int x = __this_cpu_read(y);
4. Retrieve the content of a percpu struct
DEFINE_PER_CPU(struct mystruct, y);
struct mystruct x = __get_cpu_var(y);
Converts to
memcpy(&x, this_cpu_ptr(&y), sizeof(x));
5. Assignment to a per cpu variable
DEFINE_PER_CPU(int, y)
__get_cpu_var(y) = x;
Converts to
this_cpu_write(y, x);
6. Increment/Decrement etc of a per cpu variable
DEFINE_PER_CPU(int, y);
__get_cpu_var(y)++
Converts to
this_cpu_inc(y)
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There were two places where return value from bdi_init was not tested.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Many of the uses of get_random_bytes() do not actually need
cryptographically secure random numbers. Replace those uses with a
call to prandom_u32(), which is faster and which doesn't consume
entropy from the /dev/random driver.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If we failed to init&add kobject when fill_super, stats info and proc object of
f2fs will not be released.
We should free them before we finish fill_super.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
use genernal method supported by kernel
o changes from v1
If any waiter exists at end io, wake up it.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Commit ec22ba8e ("ext4: disable merging of uninitialized extents")
ensured that if either extent under consideration is uninit, we
decline to merge, and ext4_can_extents_be_merged() returns false.
So there is no need for the caller to then test whether the
extent under consideration is unitialized; if it were, we
wouldn't have gotten that far.
The comments were also inaccurate; ext4_can_extents_be_merged()
no longer XORs the states, it fails if *either* is uninit.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Pull CIFS updates from Steve French:
"Includes a couple of fixes, plus changes to make multiplex identifiers
easier to read and correlate with network traces, and a set of
enhancements for SMB3 dialect. Also adds support for per-file
compression for both cifs and smb2/smb3 ("chattr +c filename).
Should have at least one other merge request ready by next week with
some new SMB3 security features and copy offload support"
* 'for-linus' of git://git.samba.org/sfrench/cifs-2.6:
Query network adapter info at mount time for debugging
Fix unused variable warning when CIFS POSIX disabled
Allow setting per-file compression via CIFS protocol
Query File System Alignment
Query device characteristics at mount time from server on SMB2/3 not just on cifs mounts
cifs: Send a logoff request before removing a smb session
cifs: Make big endian multiplex ID sequences monotonic on the wire
cifs: Remove redundant multiplex identifier check from check_smb_hdr()
Query file system attributes from server on SMB2, not just cifs, mounts
Allow setting per-file compression via SMB2/3
Fix corrupt SMB2 ioctl requests
Highlights include:
- Changes to the RPC socket code to allow NFSv4 to turn off timeout+retry
- Detect TCP connection breakage through the "keepalive" mechanism
- Add client side support for NFSv4.x migration (Chuck Lever)
- Add support for multiple security flavour arguments to the "sec=" mount
option (Dros Adamson)
- fs-cache bugfixes from David Howells:
- Fix an issue whereby caching can be enabled on a file that is open for
writing
- More NFSv4 open code stable bugfixes
- Various Labeled NFS (selinux) bugfixes, including one stable fix
- Fix buffer overflow checking in the RPCSEC_GSS upcall encoding
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=gflJ
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.13-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
- Changes to the RPC socket code to allow NFSv4 to turn off
timeout+retry:
* Detect TCP connection breakage through the "keepalive" mechanism
- Add client side support for NFSv4.x migration (Chuck Lever)
- Add support for multiple security flavour arguments to the "sec="
mount option (Dros Adamson)
- fs-cache bugfixes from David Howells:
* Fix an issue whereby caching can be enabled on a file that is
open for writing
- More NFSv4 open code stable bugfixes
- Various Labeled NFS (selinux) bugfixes, including one stable fix
- Fix buffer overflow checking in the RPCSEC_GSS upcall encoding"
* tag 'nfs-for-3.13-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (68 commits)
NFSv4.2: Remove redundant checks in nfs_setsecurity+nfs4_label_init_security
NFSv4: Sanity check the server reply in _nfs4_server_capabilities
NFSv4.2: encode_readdir - only ask for labels when doing readdirplus
nfs: set security label when revalidating inode
NFSv4.2: Fix a mismatch between Linux labeled NFS and the NFSv4.2 spec
NFS: Fix a missing initialisation when reading the SELinux label
nfs: fix oops when trying to set SELinux label
nfs: fix inverted test for delegation in nfs4_reclaim_open_state
SUNRPC: Cleanup xs_destroy()
SUNRPC: close a rare race in xs_tcp_setup_socket.
SUNRPC: remove duplicated include from clnt.c
nfs: use IS_ROOT not DCACHE_DISCONNECTED
SUNRPC: Fix buffer overflow checking in gss_encode_v0_msg/gss_encode_v1_msg
SUNRPC: gss_alloc_msg - choose _either_ a v0 message or a v1 message
SUNRPC: remove an unnecessary if statement
nfs: Use PTR_ERR_OR_ZERO in 'nfs/nfs4super.c'
nfs: Use PTR_ERR_OR_ZERO in 'nfs41_callback_up' function
nfs: Remove useless 'error' assignment
sunrpc: comment typo fix
SUNRPC: Add correct rcu_dereference annotation in rpc_clnt_set_transport
...
This reverts commit cb26a31157.
It mysteriously causes NetworkManager to not find the wireless device
for me. As far as I can tell, Tejun *meant* for this commit to not make
any semantic changes, but there clearly are some. So revert it, taking
into account some of the calling convention changes that happened in
this area in subsequent commits.
Cc: Tejun Heo <tj@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here's the big driver core / sysfs update for 3.13-rc1.
There's lots of dev_groups updates for different subsystems, as they all
get slowly migrated over to the safe versions of the attribute groups
(removing userspace races with the creation of the sysfs files.) Also
in here are some kobject updates, devres expansions, and the first round
of Tejun's sysfs reworking to enable it to be used by other subsystems
as a backend for an in-kernel filesystem.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlJ6xAMACgkQMUfUDdst+yk1kQCfcHXhfnrvFZ5J/mDP509IzhNS
ddEAoLEWoivtBppNsgrWqXpD1vi4UMsE
=JmVW
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core / sysfs patches from Greg KH:
"Here's the big driver core / sysfs update for 3.13-rc1.
There's lots of dev_groups updates for different subsystems, as they
all get slowly migrated over to the safe versions of the attribute
groups (removing userspace races with the creation of the sysfs
files.) Also in here are some kobject updates, devres expansions, and
the first round of Tejun's sysfs reworking to enable it to be used by
other subsystems as a backend for an in-kernel filesystem.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (83 commits)
sysfs: rename sysfs_assoc_lock and explain what it's about
sysfs: use generic_file_llseek() for sysfs_file_operations
sysfs: return correct error code on unimplemented mmap()
mdio_bus: convert bus code to use dev_groups
device: Make dev_WARN/dev_WARN_ONCE print device as well as driver name
sysfs: separate out dup filename warning into a separate function
sysfs: move sysfs_hash_and_remove() to fs/sysfs/dir.c
sysfs: remove unused sysfs_get_dentry() prototype
sysfs: honor bin_attr.attr.ignore_lockdep
sysfs: merge sysfs_elem_bin_attr into sysfs_elem_attr
devres: restore zeroing behavior of devres_alloc()
sysfs: fix sysfs_write_file for bin file
input: gameport: convert bus code to use dev_groups
input: serio: remove bus usage of dev_attrs
input: serio: use DEVICE_ATTR_RO()
i2o: convert bus code to use dev_groups
memstick: convert bus code to use dev_groups
tifm: convert bus code to use dev_groups
virtio: convert bus code to use dev_groups
ipack: convert bus code to use dev_groups
...
Introduce flag KM_ZERO which is used to alloc zeroed entry, and convert
kmem_{zone_}zalloc to call kmem_{zone_}alloc() with KM_ZERO directly,
in order to avoid the setting to zero step.
And following Dave's suggestion, make kmem_{zone_}zalloc static inline
into kmem.h as they're now just a simple wrapper.
V2:
Make kmem_{zone_}zalloc static inline into kmem.h as Dave suggested.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
To help track down AGI/AGF lock ordering issues, I added these
tracepoints to tell us when an AGI or AGF is read and locked. With
these we can now determine if the lock ordering goes wrong from
tracing captures.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
I debugging a log tail issue on a RHEL6 kernel, I added these trace
points to trace log items being added, moved and removed in the AIL
and how that affected the log tail LSN that was written to the log.
They were very helpful in that they immediately identified the cause
of the problem being seen. Hence I'd like to always have them
available for use.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Currently seqlocks and seqcounts don't support lockdep.
After running across a seqcount related deadlock in the timekeeping
code, I used a less-refined and more focused variant of this patch
to narrow down the cause of the issue.
This is a first-pass attempt to properly enable lockdep functionality
on seqlocks and seqcounts.
Since seqcounts are used in the vdso gettimeofday code, I've provided
non-lockdep accessors for those needs.
I've also handled one case where there were nested seqlock writers
and there may be more edge cases.
Comments and feedback would be appreciated!
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/1381186321-4906-3-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A NULL point should avoid to be used in destroy_segment_manager after allocating
memory fail for f2fs_sm_info.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Conflicts:
kernel/Makefile
There are conflicts in kernel/Makefile due to file moving in the
scheduler tree - resolve them.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Move the audit_bprm() call from search_binary_handler() to exec_binprm(). This
allows us to get rid of the mm member of struct audit_aux_data_execve since
bprm->mm will equal current->mm.
This also mitigates the issue that ->argc could be modified by the
load_binary() call in search_binary_handler().
audit_bprm() was being called to add an AUDIT_EXECVE record to the audit
context every time search_binary_handler() was recursively called. Only one
reference is necessary.
Reported-by: Oleg Nesterov <onestero@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
---
This patch is against 3.11, but was developed on Oleg's post-3.11 patches that
introduce exec_binprm().
Historically, when a syscall that creates a dentry fails, you get an audit
record that looks something like this (when trying to create a file named
"new" in "/tmp/tmp.SxiLnCcv63"):
type=PATH msg=audit(1366128956.279:965): item=0 name="/tmp/tmp.SxiLnCcv63/new" inode=2138308 dev=fd:02 mode=040700 ouid=0 ogid=0 rdev=00:00 obj=staff_u:object_r:user_tmp_t:s15:c0.c1023
This record makes no sense since it's associating the inode information for
"/tmp/tmp.SxiLnCcv63" with the path "/tmp/tmp.SxiLnCcv63/new". The recent
patch I posted to fix the audit_inode call in do_last fixes this, by making it
look more like this:
type=PATH msg=audit(1366128765.989:13875): item=0 name="/tmp/tmp.DJ1O8V3e4f/" inode=141 dev=fd:02 mode=040700 ouid=0 ogid=0 rdev=00:00 obj=staff_u:object_r:user_tmp_t:s15:c0.c1023
While this is more correct, if the creation of the file fails, then we
have no record of the filename that the user tried to create.
This patch adds a call to audit_inode_child to may_create. This creates
an AUDIT_TYPE_CHILD_CREATE record that will sit in place until the
create succeeds. When and if the create does succeed, then this record
will be updated with the correct inode info from the create.
This fixes what was broken in commit bfcec708.
Commit 79f6530c should also be backported to stable v3.7+.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
If a task has CAP_AUDIT_CONTROL allow that task to unset their loginuid.
This would allow a child of that task to set their loginuid without
CAP_AUDIT_CONTROL. Thus when launching a new login daemon, a
priviledged helper would be able to unset the loginuid and then the
daemon, which may be malicious user facing, do not need priv to function
correctly.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Commit 8e3dffc651 "Ext2: mark inode dirty after the function
dquot_free_block_nodirty is called" unveiled a bug in __ext2_get_block()
called from ext2_get_xip_mem(). That function called ext2_get_block()
mistakenly asking it to map 0 blocks while 1 was intended. Before the
above mentioned commit things worked out fine by luck but after that commit
we started returning that we allocated 0 blocks while we in fact
allocated 1 block and thus allocation was looping until all blocks in
the filesystem were exhausted.
Fix the problem by properly asking for one block and also add assertion
in ext2_get_blocks() to catch similar problems.
Reported-and-tested-by: Andiry Xu <andiry.xu@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
All async fuse requests must be supplied with extra reference to a fuse
file. This is necessary to ensure that the fuse file is not released until
all in-flight requests are completed. Fuse secondary writeback requests
must obey this rule as well.
Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
BDI_WRITTEN counter is used to estimate bdi bandwidth. It must be
incremented every time as bdi ends page writeback. No matter whether it
was fulfilled by actual write or by discarding the request (e.g. due to
shrunk i_size).
Note that even before writepages patches, the case "Got truncated off
completely" was handled in fuse_send_writepage() by calling
fuse_writepage_finish() which updated BDI_WRITTEN unconditionally.
Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
If writeback happens while fuse is in FUSE_NOWRITE condition, the request
will be queued but not processed immediately (see fuse_flush_writepages()).
Until FUSE_NOWRITE becomes relaxed, more writebacks can happen. They will
be queued as "secondary" requests to that first ("primary") request.
Existing implementation crops only primary request. This is not correct
because a subsequent extending write(2) may increase i_size and then
secondary requests won't be cropped properly. The result would be stale
data written to the server to a file offset where zeros must be.
Similar problem may happen if secondary requests are attached to an
in-flight request that was already cropped.
The patch solves the issue by cropping all secondary requests in
fuse_writepage_end(). Thanks to Miklos for idea.
Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
fuse_writepage_in_flight() returns false if it fails to find request with
given index in fi->writepages. Then the caller proceeds with populating
data->orig_pages[] and incrementing req->num_pages. Hence,
fuse_writepage_in_flight() must revert changes it made in request before
returning false.
Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
This reverts commit 7ebe40f203. We forgot
the nfs4_put_delegation call in fs/nfsd/nfs4callback.c which should not
be unhashing the stateid. This lead to warnings from the idr code when
we tried to removed id's twice.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We already check for nfs_server_capable(inode, NFS_CAP_SECURITY_LABEL)
in nfs4_label_alloc()
We check the minor version in _nfs4_server_capabilities before setting
NFS_CAP_SECURITY_LABEL.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We don't want to be setting capabilities and/or requesting attributes
that are not appropriate for the NFSv4 minor version.
- Ensure that we clear the NFS_CAP_SECURITY_LABEL capability when appropriate
- Ensure that we limit the attribute bitmasks to the mounted_on_fileid
attribute and less for NFSv4.0
- Ensure that we limit the attribute bitmasks to suppattr_exclcreat and
less for NFSv4.1
- Ensure that we limit it to change_sec_label or less for NFSv4.2
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently, if the server is doing NFSv4.2 and supports labeled NFS, then
our on-the-wire READDIR request ends up asking for the label information,
which is then ignored unless we're doing readdirplus.
This patch ensures that READDIR doesn't ask the server for label information
at all unless the readdir->bitmask contains the FATTR4_WORD2_SECURITY_LABEL
attribute, and the readdir->plus flag is set.
While we're at it, optimise away the 3rd bitmap field if it is zero.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently, we fetch the security label when revalidating an inode's
attributes, but don't apply it. This is in contrast to the readdir()
codepath where we do apply label changes.
Cc: Dave Quigley <dpquigl@davequigley.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Removing an inode from the namespace involves removing the directory
entry and dropping the link count on the inode. Removing the
directory entry can result in locking an AGF (directory blocks were
freed) and removing a link count can result in placing the inode on
an unlinked list which results in locking an AGI.
The big problem here is that we have an ordering constraint on AGF
and AGI locking - inode allocation locks the AGI, then can allocate
a new extent for new inodes, locking the AGF after the AGI.
Similarly, freeing the inode removes the inode from the unlinked
list, requiring that we lock the AGI first, and then freeing the
inode can result in an inode chunk being freed and hence freeing
disk space requiring that we lock an AGF.
Hence the ordering that is imposed by other parts of the code is AGI
before AGF. This means we cannot remove the directory entry before
we drop the inode reference count and put it on the unlinked list as
this results in a lock order of AGF then AGI, and this can deadlock
against inode allocation and freeing. Therefore we must drop the
link counts before we remove the directory entry.
This is still safe from a transactional point of view - it is not
until we get to xfs_bmap_finish() that we have the possibility of
multiple transactions in this operation. Hence as long as we remove
the directory entry and drop the link count in the first transaction
of the remove operation, there are no transactional constraints on
the ordering here.
Change the ordering of the operations in the xfs_remove() function
to align the ordering of AGI and AGF locking to match that of the
rest of the code.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Commit ec22ba8e ("ext4: disable merging of uninitialized extents")
ensured that if either extent under consideration is uninit, we
decline to merge, and immediately return.
But right after that test, we test again for an uninit
extent; we can never hit this. So just remove the impossible
test and associated variable.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
The if_dqblk struct has a 4 byte hole at the end of the struct so
uninitialized stack information is leaked to user space.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
By using the generic list_lru code, we can now separate the
per sb quota list locking from the lru locking. The lru
lock is made into the inner-most lock.
As a result of this new lock order, we may occasionally see
items on the per-sb quota list which are "dead" so that the
two places where we traverse that list are updated to take
account of that.
As a result of this patch, the gfs2 quota shrinker is now
NUMA zone aware, and we are also laying the foundations for
further improvments in due course.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Abhijith Das <adas@redhat.com>
Tested-by: Abhijith Das <adas@redhat.com>
Cc: Dave Chinner <dchinner@redhat.com>
This is a straight forward rename which is in preparation for
introducing the generic list_lru infrastructure in the
following patch.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Abhijith Das <adas@redhat.com>
Tested-by: Abhijith Das <adas@redhat.com>
This patch adds reflink support to the quota data cache. It
looks a bit strange because we still don't have a sensible
split in the lookup by id and the lru list. That is coming in
later patches though.
The intent here is just to swap the current ref count for
reflinks in all cases with as little as possible other change.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Abhijith Das <adas@redhat.com>
Tested-by: Abhijith Das <adas@redhat.com>
In wait_on_node_pages_writeback we will test and clear error flag for all
pages in radix tree, but not necessary.
So we only do this for pages belong to the specified inode.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
When CONFIG_CIFS_STATS2 enabled query adapter info for debugging
It is easy now in SMB3 to query the information about the server's
network interfaces (and at least Windows 8 and above do this, if not
other clients) there are some useful pieces of information you can get
including:
- all of the network interfaces that the server advertises (not just
the one you are mounting over), and with SMB3 supporting multichannel
this helps with more than just failover (also aggregating multiple
sockets under one mount)
- whether the adapter supports RSS (useful to know if you want to
estimate whether setting up two or more socket connections to the same
address is going to be faster due to RSS offload in the adapter)
- whether the server supports RDMA
- whether the server has IPv6 interfaces (if you connected over IPv4
but prefer IPv6 e.g.)
- what the link speed is (you might want to reconnect over a higher
speed interface if available)
(Of course we could also rerequest this on every mount cheaplly to the
same server, as Windows apparently does, so we can update the adapter
info on new mounts, and also on every reconnect if the network
interface drops temporarily - so we don't have to rely on info from
the first mount to this server)
It is trivial to request this information - and certainly will be useful
when we get to the point of doing multichannel (and eventually RDMA),
but some of this (linkspeed etc.) info may help for debugging in
the meantime. Enable this request when CONFIG_CIFS_STATS2 is on
(only for smb3 mounts since it is an SMB3 or later ioctl).
Signed-off-by: Steve French <smfrench@gmail.com>
Fix unused variable warning when CONFIG_CIFS_POSIX disabled.
fs/cifs/ioctl.c: In function 'cifs_ioctl':
>> fs/cifs/ioctl.c:40:8: warning: unused variable 'ExtAttrMask' [-Wunused-variable]
__u64 ExtAttrMask = 0;
^
Pointed out by 0-DAY kernel build testing backend
Signed-off-by: Steve French <smfrench@gmail.com>
An earlier patch allowed setting the per-file compression flag
"chattr +c filename"
on an smb2 or smb3 mount, and also allowed lsattr to return
whether a file on a cifs, or smb2/smb3 mount was compressed.
This patch extends the ability to set the per-file
compression flag to the cifs protocol, which uses a somewhat
different IOCTL mechanism than SMB2, although the payload
(the flags stored in the compression_state) are the same.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
In SMB3 it is now possible to query the file system
alignment info, and the preferred (for performance)
sector size and whether the underlying disk
has no seek penalty (like SSD).
Query this information at mount time for SMB3,
and make it visible in /proc/fs/cifs/DebugData
for debugging purposes.
This alignment information and preferred sector
size info will be helpful for the copy offload
patches to setup the right chunks in the CopyChunk
requests. Presumably the knowledge that the
underlying disk is SSD could also help us
make better readahead and writebehind
decisions (something to look at in the future).
Signed-off-by: Steve French <smfrench@gmail.com>
Currently SMB2 and SMB3 mounts do not query the device information at mount time
from the server as is done for cifs. These can be useful for debugging.
This is a minor patch, that extends the previous one (which added ability to
query file system attributes at mount time - this returns the device
characteristics - also via in /proc/fs/cifs/DebugData)
Signed-off-by: Steve French <smfrench@gmail.com>
Send a smb session logoff request before removing smb session off of the list.
On a signed smb session, remvoing a session off of the list before sending
a logoff request results in server returning an error for lack of
smb signature.
Never seen an error during smb logoff, so as per MS-SMB2 3.2.5.1,
not sure how an error during logoff should be retried. So for now,
if a server returns an error to a logoff request, log the error and
remove the session off of the list.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
The multiplex identifier (MID) in the SMB header is only
ever used by the client, in conjunction with PID, to match responses
from the server. As such, the endianess of the MID is not important.
However, When tracing packet sequences on the wire, protocol analyzers
such as wireshark display MID as little endian. It is much more informative
for the on-the-wire MID sequences to match debug information emitted by the
CIFS driver. Therefore, one should write and read MID in the SMB header
assuming it is always little endian.
Observed from wireshark during the protocol negotiation
and session setup:
Multiplex ID: 256
Multiplex ID: 256
Multiplex ID: 512
Multiplex ID: 512
Multiplex ID: 768
Multiplex ID: 768
After this patch on-the-wire MID values begin at 1 and increase monotonically.
Introduce get_next_mid64() for the internal consumers that use the full 64 bit
multiplex identifier.
Introduce the helpers get_mid() and compare_mid() to make the endian
translation clear.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Tim Gardner <timg@tpi.com>
Signed-off-by: Steve French <smfrench@gmail.com>
sysfs_assoc_lock is an odd piece of locking. In general, whoever owns
a kobject is responsible for synchronizing sysfs operations and sysfs
proper assumes that, for example, removal won't race with any other
operation; however, this doesn't work for symlinking because an entity
performing symlink doesn't usually own the target kobject and thus has
no control over its removal.
sysfs_assoc_lock synchronizes symlink operations against kobj->sd
disassociation so that symlink code doesn't end up dereferencing
already freed sysfs_dirent by racing with removal of the target
kobject.
This is quite obscure and the generic name of the lock and lack of
comments make it difficult to understand its role. Let's rename it to
sysfs_symlink_target_lock and add comments explaining what's going on.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
13c589d5b0 ("sysfs: use seq_file when reading regular files")
converted regular sysfs files to use seq_file. The commit substituted
generic_file_llseek() with seq_lseek() for llseek implementation.
Before the change, all regular sysfs files were allowed to seek to any
position in [0, PAGE_SIZE] as the file size is always PAGE_SIZE and
generic_file_llseek() allows any seeking inside the range under file
size; however, seq_lseek()'s behavior is different. It traverses the
output by repeatedly invoking ->show() until it reaches the target
offset or traversal indicates EOF. As seq_files are fully dynamic and
may not end at all, it doesn't support seeking from the end
(SEEK_END).
Apparently, there are userland tools which uses SEEK_END to discover
the buffer size to use and the switch to seq_lseek() disturbs them as
SEEK_END fails with -EINVAL.
The only benefits of using seq_lseek() instead of
generic_file_llseek() are
* Early failure. If traversing to certain file position should fail,
seq_lseek() will report such failures on lseek(2) instead of the
following read/write operations.
* EOF detection. While SEEK_END is not supported, SEEK_SET/CUR +
large offset can be used to detect eof - eof at the time of the seek
anyway as the file size may change dynamically.
Both aren't necessary for sysfs or prospect kernfs users. Revert to
genefic_file_llseek() and preserve the original behavior.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Link: https://lkml.kernel.org/r/20131031114358.GA5551@osiris
Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Security labels in setattr calls are currently ignored because we forget
to set label->len.
Cc: stable@vger.kernel.org
Reported-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that _nfs4_do_get_security_label() also initialises the
SEQUENCE call correctly, by having it call into nfs4_call_sync().
Reported-by: Jeff Layton <jlayton@redhat.com>
Cc: stable@vger.kernel.org # 3.11+
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Resolve cherry-picking conflicts:
Conflicts:
mm/huge_memory.c
mm/memory.c
mm/mprotect.c
See this upstream merge commit for more details:
52469b4fcd Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We do not want to dirty the dentry->d_flags cacheline in dput() just to
set the DCACHE_REFERENCED flag when it is already set in the common case
anyway. This way the first cacheline of the dentry (which contains the
RCU lookup information etc) can stay shared among multiple CPU's.
This finishes off some of the details of all the scalability patches
merged during the merge window.
Also don't mark dentry_kill() for inlining, since it's the uncommon path
and inlining it just makes the common path slower due to extra function
entry/exit overhead.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
At xfs_iext_add(), if extent(s) are being appended to the last page in
the indirection array and the new extent(s) don't fit in the page, the
number of extents(erp->er_extcount) in a new allocated entry should be
the minimum value between count and XFS_LINEAR_EXTS, instead of count.
For now, there is no existing test case can demonstrates a problem with
the er_extcount being set incorrectly here, but it obviously like a bug.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
This reverts commit 05713082ab. The idea
to remove __GFP_NOFAIL was opposed by Andrew Morton. Although mm guys do
want to get rid of __GFP_NOFAIL users, opencoding the allocation retry
is even worse.
See emails following
http://www.gossamer-threads.com/lists/linux/kernel/1809153#1809153
Signed-off-by: Jan Kara <jack@suse.cz>
commit 6686390bab (NFS: remove incorrect "Lock reclaim failed!"
warning.) added a test for a delegation before checking to see if any
reclaimed locks failed. The test however is backward and is only doing
that check when a delegation is held instead of when one isn't.
Cc: NeilBrown <neilb@suse.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Fixes: 6686390bab6a: NFS: remove incorrect "Lock reclaim failed!" warning.
Cc: stable@vger.kernel.org # 3.12
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
A bg that's been flagged "corrupt" by definition has no free blocks,
so that the allocator won't be tempted to use the damaged bg.
Therefore, we shouldn't count the clusters in the damaged group when
calculating free counts.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Previously, f2fs_sync_file() waits for all the node blocks to be written.
But, we don't need to do that, but wait only the inode-related node blocks.
This patch adds wait_on_node_pages_writeback() in which waits inode-related
node blocks that are on writeback.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The server does allow NFS over v4.2, even if it doesn't add any new
operations yet.
I also switch to using constants to represent the last operation for
each minor version since this makes the code cleaner and easier to
understand at a quick glance.
Signed-off-by: Anna Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Today, if xfs_sb_read_verify encounters a v4 superblock
with junk past v4 fields which includes data in sb_crc,
it will be treated as a failing checksum and a significant
corruption.
There are known prior bugs which leave junk at the end
of the V4 superblock; we don't need to actually fail the
verification in this case if other checks pan out ok.
So if this is a secondary superblock, and the primary
superblock doesn't indicate that this is a V5 filesystem,
don't treat this as an actual checksum failure.
We should probably check the garbage condition as
we do in xfs_repair, and possibly warn about it
or self-heal, but that's a different scope of work.
Stable folks: This can go back to v3.10, which is what
introduced the sb CRC checking that is tripped up by old,
stale, incorrect V4 superblocks w/ unzeroed bits.
Cc: stable@vger.kernel.org
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
In xlog_verify_iclog a debug check of the incore log buffers prints an
error if icptr is null and then goes on to dereference the pointer
regardless. Convert this to an assert so that the intention is clear.
This was reported by Coverty.
Signed-off-by: Ben Myers <bpm@sgi.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
ASSERT on args takes place after args dereference.
This assertion is redundant since we are going to panic anyway.
Found by Linux Driver Verification project (linuxtesting.org) -
PVS-Studio analyzer.
Signed-off-by: Denis Efremov <yefremov.denis@gmail.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Page cache allocation doesn't always go through ->begin_write and
hence we don't always get the opportunity to set the allocation
context to GFP_NOFS. Failing to do this means we open up the direct
relcaim stack to recurse into the filesystem and consume a
significant amount of stack.
On RHEL6.4 kernels we are seeing ra_submit() and
generic_file_splice_read() from an nfsd context recursing into the
filesystem via the inode cache shrinker and evicting inodes. This is
causing truncation to be run (e.g EOF block freeing) and causing
bmap btree block merges and free space btree block splits to occur.
These btree manipulations are occurring with the call chain already
30 functions deep and hence there is not enough stack space to
complete such operations.
To avoid these specific overruns, we need to prevent the page cache
allocation from recursing via direct reclaim. We can do that because
the allocation functions take the allocation context from that which
is stored in the mapping for the inode. We don't set that right now,
so the default is GFP_HIGHUSER_MOVABLE, which is effectively a
GFP_KERNEL context. We need it to be the equivalent of GFP_NOFS, so
when we initialise an inode, set the mapping gfp mask appropriately.
This makes the use of AOP_FLAG_NOFS redundant from other parts of
the XFS IO path, so get rid of it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
The kbuild test robot indicated that there were some new sparse
warnings in fs/xfs/xfs_dquot_buf.c. Actually, there were a lot more
that is wasn't warning about, so fix them all up.
Reported-by: kbuild test robot
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The directory block format verifier fails to check that the leaf
entry count is in a valid range, and so if it is corrupted then it
can lead to derefencing a pointer outside the block buffer. While we
can't exactly validate the count without first walking the directory
block, we can ensure the count lands in the valid area within the
directory block and hence avoid out-of-block references.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Rather than hiding the ftype field size accounting inside the dirent
padding for the ".." and first entry offset functions for v2
directory formats, add explicit functions that calculate it
correctly.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Many of the vectorised function calls now take no parameters and
return a constant value. There is no reason for these to be vectored
functions, so convert them to constants
Binary sizes:
text data bss dec hex filename
794490 96802 1096 892388 d9de4 fs/xfs/xfs.o.orig
792986 96802 1096 890884 d9804 fs/xfs/xfs.o.p1
792350 96802 1096 890248 d9588 fs/xfs/xfs.o.p2
789293 96802 1096 887191 d8997 fs/xfs/xfs.o.p3
789005 96802 1096 886903 d8997 fs/xfs/xfs.o.p4
789061 96802 1096 886959 d88af fs/xfs/xfs.o.p5
789733 96802 1096 887631 d8b4f fs/xfs/xfs.o.p6
791421 96802 1096 889319 d91e7 fs/xfs/xfs.o.p7
791701 96802 1096 889599 d92ff fs/xfs/xfs.o.p8
791205 96802 1096 889103 d91cf fs/xfs/xfs.o.p9
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Next step in the vectorisation process is the directory free block
encode/decode operations. There are relatively few of these, though
there are quite a number of calls to them.
Binary sizes:
text data bss dec hex filename
794490 96802 1096 892388 d9de4 fs/xfs/xfs.o.orig
792986 96802 1096 890884 d9804 fs/xfs/xfs.o.p1
792350 96802 1096 890248 d9588 fs/xfs/xfs.o.p2
789293 96802 1096 887191 d8997 fs/xfs/xfs.o.p3
789005 96802 1096 886903 d8997 fs/xfs/xfs.o.p4
789061 96802 1096 886959 d88af fs/xfs/xfs.o.p5
789733 96802 1096 887631 d8b4f fs/xfs/xfs.o.p6
791421 96802 1096 889319 d91e7 fs/xfs/xfs.o.p7
791701 96802 1096 889599 d92ff fs/xfs/xfs.o.p8
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Conversion from on-disk structures to in-core header structures
currently relies on magic number checks. If the magic number is
wrong, but one of the supported values, we do the wrong thing with
the encode/decode operation. Split these functions so that there are
discrete operations for the specific directory format we are
handling.
In doing this, move all the header encode/decode functions to
xfs_da_format.c as they are directly manipulating the on-disk
format. It should be noted that all the growth in binary size is
from xfs_da_format.c - the rest of the code actaully shrinks.
text data bss dec hex filename
794490 96802 1096 892388 d9de4 fs/xfs/xfs.o.orig
792986 96802 1096 890884 d9804 fs/xfs/xfs.o.p1
792350 96802 1096 890248 d9588 fs/xfs/xfs.o.p2
789293 96802 1096 887191 d8997 fs/xfs/xfs.o.p3
789005 96802 1096 886903 d8997 fs/xfs/xfs.o.p4
789061 96802 1096 886959 d88af fs/xfs/xfs.o.p5
789733 96802 1096 887631 d8b4f fs/xfs/xfs.o.p6
791421 96802 1096 889319 d91e7 fs/xfs/xfs.o.p7
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The remaining non-vectorised code for the directory structure is the
node format blocks. This is shared with the attribute tree, and so
is slightly more complex to vectorise.
Introduce a "non-directory" directory ops structure that is attached
to all non-directory inodes so that attribute operations can be
vectorised for all inodes.
Once we do this, we can vectorise all the da btree operations.
Because this patch adds more infrastructure than it removes the
binary size does not decrease:
text data bss dec hex filename
794490 96802 1096 892388 d9de4 fs/xfs/xfs.o.orig
792986 96802 1096 890884 d9804 fs/xfs/xfs.o.p1
792350 96802 1096 890248 d9588 fs/xfs/xfs.o.p2
789293 96802 1096 887191 d8997 fs/xfs/xfs.o.p3
789005 96802 1096 886903 d8997 fs/xfs/xfs.o.p4
789061 96802 1096 886959 d88af fs/xfs/xfs.o.p5
789733 96802 1096 887631 d8b4f fs/xfs/xfs.o.p6
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Next step in the vectorisation process is the leaf block
encode/decode operations. Most of the operations on leaves are
handled by the data block vectors, so there are relatively few of
them here.
Because of all the shuffling of code and having to pass more state
to some functions, this patch doesn't directly reduce the size of
the binary. It does open up many more opportunities for factoring
and optimisation, however.
text data bss dec hex filename
794490 96802 1096 892388 d9de4 fs/xfs/xfs.o.orig
792986 96802 1096 890884 d9804 fs/xfs/xfs.o.p1
792350 96802 1096 890248 d9588 fs/xfs/xfs.o.p2
789293 96802 1096 887191 d8997 fs/xfs/xfs.o.p3
789005 96802 1096 886903 d8997 fs/xfs/xfs.o.p4
789061 96802 1096 886959 d88af fs/xfs/xfs.o.p5
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Convert the rest of the directory data block encode/decode
operations to vector format.
This further reduces the size of the built binary:
text data bss dec hex filename
794490 96802 1096 892388 d9de4 fs/xfs/xfs.o.orig
792986 96802 1096 890884 d9804 fs/xfs/xfs.o.p1
792350 96802 1096 890248 d9588 fs/xfs/xfs.o.p2
789293 96802 1096 887191 d8997 fs/xfs/xfs.o.p3
789005 96802 1096 886903 d8997 fs/xfs/xfs.o.p4
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Following from the initial patches to vectorise the shortform
directory encode/decode operations, convert half the data block
operations to use the vector. The rest will be done in a second
patch.
This further reduces the size of the built binary:
text data bss dec hex filename
794490 96802 1096 892388 d9de4 fs/xfs/xfs.o.orig
792986 96802 1096 890884 d9804 fs/xfs/xfs.o.p1
792350 96802 1096 890248 d9588 fs/xfs/xfs.o.p2
789293 96802 1096 887191 d8997 fs/xfs/xfs.o.p3
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Following from the initial patch to introduce the directory
operations vector, convert the rest of the shortform directory
operations to use vectored ops rather than superblock feature
checks. This further reduces the size of the built binary:
text data bss dec hex filename
794490 96802 1096 892388 d9de4 fs/xfs/xfs.o.orig
792986 96802 1096 890884 d9804 fs/xfs/xfs.o.p1
792350 96802 1096 890248 d9588 fs/xfs/xfs.o.p2
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Lots of the dir code now goes through switches to determine what is
the correct on-disk format to parse. It generally involves a
"xfs_sbversion_hasfoo" check, deferencing the superblock version and
feature fields and hence touching several cache lines per operation
in the process. Some operations do multiple checks because they nest
conditional operations and they don't pass the information in a
direct fashion between each other.
Hence, add an ops vector to the xfs_inode structure that is
configured when the inode is initialised to point to all the correct
decode and encoding operations. This will significantly reduce the
branchiness and cacheline footprint of the directory object decoding
and encoding.
This is the first patch in a series of conversion patches. It will
introduce the ops structure, the setup of it and add the first
operation to the vector. Subsequent patches will convert directory
ops one at a time to keep the changes simple and obvious.
Just this patch shows the benefit of such an approach on code size.
Just converting the two shortform dir operations as this patch does
decreases the built binary size by ~1500 bytes:
$ size fs/xfs/xfs.o.orig fs/xfs/xfs.o.p1
text data bss dec hex filename
794490 96802 1096 892388 d9de4 fs/xfs/xfs.o.orig
792986 96802 1096 890884 d9804 fs/xfs/xfs.o.p1
$
That's a significant decrease in the instruction cache footprint of
the directory code for such a simple change, and indicates that this
approach is definitely worth pursuing further.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Both POSIX.1-2008 and Linux Programmer's Manual have a dedicated return
error code for a case, when a file doesn't support mmap(), it's ENODEV.
This change replaces overloaded EINVAL with ENODEV in a situation
described above for sysfs binary files.
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When using FITRIM ioctl on a file system without journal it will
only trim the block group once, no matter how many times you invoke
FITRIM ioctl and how many block you release from the block group.
It is because we only clear EXT4_GROUP_INFO_WAS_TRIMMED_BIT in journal
callback. Fix this by clearing the bit in no journal mode as well.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Jorge Fábregas <jorge.fabregas@gmail.com>
A comment claims the caller should take it, but that's not being done.
Note we don't want it around the cancel_delayed_work_sync since that may
wait on work which holds the client lock.
Reported-by: Benny Halevy <bhalevy@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This reverts commit 9745cdb36d (select: use freezable blocking call)
that triggers problems during resume from suspend to RAM on Paul Bolle's
32-bit x86 machines. Paul says:
Ever since I tried running (release candidates of) v3.11 on the two
working i686s I still have lying around I ran into issues on resuming
from suspend. Reverting 9745cdb36d (select: use freezable blocking
call) resolves those issues.
Resuming from suspend on i686 on (release candidates of) v3.11 and
later triggers issues like:
traps: systemd[1] general protection ip:b738e490 sp:bf882fc0 error:0 in libc-2.16.so[b731c000+1b0000]
and
traps: rtkit-daemon[552] general protection ip:804d6e5 sp:b6cb32f0 error:0 in rtkit-daemon[8048000+d000]
Once I hit the systemd error I can only get out of the mess that the
system is at that point by power cycling it.
Since we are reverting another freezer-related change causing similar
problems to happen, this one should be reverted as well.
References: https://lkml.org/lkml/2013/10/29/583
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Fixes: 9745cdb36d (select: use freezable blocking call)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 3.11+ <stable@vger.kernel.org> # 3.11+
This reverts commit 1c441e9212 (epoll: use freezable blocking call)
which is reported to cause user space memory corruption to happen
after suspend to RAM.
Since it appears to be extremely difficult to root cause this
problem, it is best to revert the offending commit and try to address
the original issue in a better way later.
References: https://bugzilla.kernel.org/show_bug.cgi?id=61781
Reported-by: Natrio <natrio@list.ru>
Reported-by: Jeff Pohlmeyer <yetanothergeek@gmail.com>
Bisected-by: Leo Wolf <jclw@ymail.com>
Fixes: 1c441e9212 (epoll: use freezable blocking call)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 3.11+ <stable@vger.kernel.org> # 3.11+
We were using a different array of function pointers to represent each
minor version. This makes adding a new minor version tedious, since it
needs a step to copy, paste and modify a new version of the same
functions.
This patch combines the v4 and v4.1 arrays into a single instance and
will check minor version support inside each decoder function.
Signed-off-by: Anna Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In ext4_read_inline_dir(), if there is inline data, the successful
return value is the return value of ext4_read_inline_data(). Howewer,
this is used by ext4_readdir(), and while it seems harmless to return
a positive value on success, it's inconsistent, since historically
we've always return 0 on success.
Signed-off-by: BoxiLiu <lewis.liulei@huawei.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Tao Ma <boyu.mt@taobao.com>
Pair the two trace events to make troubeshooting writepages
easier, and it should be more convinient to write a simple script
to parse the traces.
Cc: linux-ext4@vger.kernel.org
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Previously, check_block_count check valid_map with bit data type in common
scenario that sit has all ones or zeros bitmap, it makes low mount performance.
So let's check the special bitmap with integer data type instead of the bit one.
v1-->v2:
o use find_next_{zero_}bit_le for better performance and readable as Jaegeuk
suggested.
o use neat logogram in comment as Gu Zheng suggested.
o search continuous ones or zeros for better performance when checking mixed
bitmap.
Suggested-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Signed-off-by: Shu Tan <shu.tan@samsung.com>
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
npages_for_summary_flush uses (SUMMARY_SIZE + 1) as the size of a f2fs_summary
while its actual size is SUMMARY_SIZE. So the result sometimes is bigger than
actual number by one, which causes checkpoint can't be written into disk
contiguously, and sometimes summary blocks can't be compacted like they should.
Besides, when writing summary blocks into pages, if remain space in a page
isn't big enough for one f2fs_summary, it will be left unused, current code
seems not to take it into account.
Signed-off-by: Fan Li <fanofcode.li@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Separate out sysfs_warn_dup() out of sysfs_add_one(). This will help
separating out the core sysfs functionalities into kernfs so that it
can be used by non-sysfs users too.
This doesn't make any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Most removal related logic is implemented in fs/sysfs/dir.c. Move
sysfs_hash_and_remove() to fs/sysfs/dir.c so that __sysfs_remove()
doesn't have to be public.
This is pure relocation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sysfs_get_dentry() has been gone for years now. Remove the left-over
prototype.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ignore_lockdep is currently honored only for regular files. There's
no reason to ignore it for bin files. Update sysfs_ignore_lockdep()
so that bin_attr.attr.ignore_lockdep works too.
While this doesn't have any in-kernel user, this unifies the behaviors
between regular and bin files and will help later changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3124eb1679 ("sysfs: merge regular and bin file handling") folded bin
file handling into regular file handling. Among other things, bin
file now shares the same open path including sysfs_open_dirent
association using sysfs_dirent->s_attr.open. This is buggy because
->s_bin_attr lives in the same union and doesn't have the field. This
bug doesn't trigger because sysfs_elem_bin_attr doesn't have an active
field at the conflicting position. It does have a field "buffers" but
it isn't used anymore.
This patch collapses sysfs_elem_bin_attr into sysfs_elem_attr so that
the bin_attr is accessed through ->s_attr.bin_attr which lives with
->s_attr.attr in an anonymous union. The code paths already assume
bin_attr contains attr as the first element, so this doesn't add any
more assumptions while making it explicit that the two types are
handled together.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we're going to refuse to accept these it would be polite of us to at
least say so....
This introduces a slight complication since we need to grandfather in
exportfs's ill-advised use of -1 uid and gid on its test_export.
If it turns out there are other users passing down -1 we may need to
do something else.
Best might be to drop the checks entirely, but I'm not sure if other
parts of the kernel might assume that a task can't run as uid or gid -1.
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Someone noticed exportfs happily accepted exports that would later be
rejected when mountd tried to give them to the kernel. Fix this.
This is a regression from 4c1e1b34d5
"nfsd: Store ex_anon_uid and ex_anon_gid as kuids and kgids".
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: stable@vger.kernel.org
Reported-by: Yin.JianHong <jiyin@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The reporter saw a NULL dereference when a filesystem's ->mknod returned
success but left the dentry negative, and then nfsd tried to dereference
d_inode (in this case because the CREATE was followed by a GETATTR in
the same nfsv4 compound).
fh_update already checks for this and another broken case, but for some
reason it returns success and leaves nfsd trying to soldier on. If it
failed we'd avoid the crash. There's only so much we can do with a
buggy filesystem, but it's easy enough to bail out here, so let's do
that.
Reported-by: Antti Tönkyrä <daedalus@pingtimeout.net>
Tested-by: Antti Tönkyrä <daedalus@pingtimeout.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
[use list_splice_init]
Signed-off-by: Benny Halevy <bhalevy@primarydata.com>
[bfields: no need for recall_lock here]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
idr_remove is about to be called before kmem_cache_free so unhashing it
is redundant
Signed-off-by: Benny Halevy <bhalevy@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
During xattr updating, free size should be corrected to remainder free size
+ old entry size.
It can avoid ENOSPC error when we update old entry with the same size new
entry at fully filled xattr.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
If you want to remove unnecessary BUG_ONs, you can just turn off F2FS_CHECK_FS
in your kernel config.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This config will support an option to remove so many BUG_ONs that degrade
the performance potentially.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Pull fs-cache fixes from David Howells:
Can you pull these commits to fix an issue with NFS whereby caching can be
enabled on a file that is open for writing by subsequently opening it for
reading. This can be made to crash by opening it for writing again if you're
quick enough.
The gist of the patchset is that the cookie should be acquired at inode
creation only and subsequently enabled and disabled as appropriate (which
dispenses with the backing objects when they're not needed).
The extra synchronisation that NFS does can then be dispensed with as it is
thenceforth managed by FS-Cache.
Could you send these on to Linus?
This likely will need fixing also in CIFS and 9P also once the FS-Cache
changes are upstream. AFS and Ceph are probably safe.
* 'fscache' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
NFS: Use i_writecount to control whether to get an fscache cookie in nfs_open()
FS-Cache: Provide the ability to enable/disable cookies
FS-Cache: Add use/unuse/wake cookie wrappers
This check was added by Al Viro with
d9e80b7de9 "nfs d_revalidate() is too
trigger-happy with d_drop()", with the explanation that we don't want to
remove the root of a disconnected tree, which will still be included on
the s_anon list.
But DCACHE_DISCONNECTED does *not* actually identify dentries that are
disconnected from the dentry tree or hashed on s_anon. IS_ROOT() is the
way to do that.
Also add a comment from Al's commit to remind us why this check is
there.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Use 'PTR_ERR_OR_ZERO()' rather than 'IS_ERR(...) ? PTR_ERR(...) : 0'.
Signed-off-by: Geyslan G. Bem <geyslan@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Use 'PTR_ERR_OR_ZERO()' rather than 'IS_ERR(...) ? PTR_ERR(...) : 0'.
Signed-off-by: Geyslan G. Bem <geyslan@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
the 'error' variable was been assigned twice in vain.
Signed-off-by: Geyslan G. Bem <geyslan@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
All calls to nfs4_put_delegation are preceded with remove_stid.
Signed-off-by: Benny Halevy <bhalevy@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In the out_free: path, the newly allocated stid must be removed rather
than unhashed so it can never be found.
Signed-off-by: Benny Halevy <bhalevy@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This patch adds support for multiple security options which can be
specified using a colon-delimited list of security flavors (the same
syntax as nfsd's exports file).
This is useful, for instance, when NFSv4.x mounts cross SECINFO
boundaries. With this patch a user can use "sec=krb5i,krb5p"
to mount a remote filesystem using krb5i, but can still cross
into krb5p-only exports.
New mounts will try all security options before failing. NFSv4.x
SECINFO results will be compared against the sec= flavors to
find the first flavor in both lists or if no match is found will
return -EPERM.
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Since the parsed sec= flavor is now stored in nfs_server->auth_info,
we no longer need an nfs_server flag to determine if a sec= option was
used.
This flag has not been completely removed because it is still needed for
the (old but still supported) non-text parsed mount options ABI
compatability.
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cache the auth_info structure in nfs_server and pass these values to submounts.
This lays the groundwork for supporting multiple sec= options.
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When filling parsed_mount_data, store the parsed sec= mount option in
the new struct nfs_auth_info and the chosen flavor in selected_flavor.
This patch lays the groundwork for supporting multiple sec= options.
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In nfs4_wait_clnt_recover(), hold a reference to the clp being
waited on. The state manager can reduce clp->cl_count to 1, in
which case the nfs_put_client() in nfs4_run_state_manager() can
free *clp before wait_on_bit() returns and allows
nfs4_wait_clnt_recover() to run again.
The behavior at that point is non-deterministic. If the waited-on
bit still happens to be zero, wait_on_bit() will wake the waiter as
expected. If the bit is set again (say, if the memory was poisoned
when freed) wait_on_bit() can leave the waiter asleep.
This is a narrow fix which ensures the safety of accessing *clp in
nfs4_wait_clnt_recover(), but does not address the continued use
of a possibly freed *clp after nfs4_wait_clnt_recover() returns
(see nfs_end_delegation_return(), for example).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Broadly speaking, v4.1 migration is untested. There are no servers
in the wild that support NFSv4.1 migration. However, as server
implementations become available, we do want to enable testing by
developers, while leaving it disabled for environments for which
broken migration support would be an unpleasant surprise.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
With the advent of NFSv4 sessions in NFSv4.1 and following, a "lease
moved" condition is reported differently than it is in NFSv4.0.
NFSv4 minor version 0 servers return an error status code,
NFS4ERR_LEASE_MOVED, to signal that a lease has moved. This error
causes the whole compound operation to fail. Normal compounds
against this server continue to fail until the client performs
migration recovery on the migrated share.
Minor version 1 and later servers assert a bit flag in the reply to
a compound's SEQUENCE operation to signal LEASE_MOVED. This is not
a fatal condition: operations against this server continue normally.
The server asserts this flag until the client performs migration
recovery on the migrated share.
Note that servers MUST NOT return NFS4ERR_LEASE_MOVED to NFSv4
clients not using NFSv4.0.
After the server asserts any of the sr_status_flags in the SEQUENCE
operation in a typical compound, our client initiates standard lease
recovery. For NFSv4.1+, a stand-alone SEQUENCE operation is
performed to discover what recovery is needed.
If SEQ4_STATUS_LEASE_MOVED is asserted in this stand-alone SEQUENCE
operation, our client attempts to discover which FSIDs have been
migrated, and then performs migration recovery on each.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
With NFSv4 minor version 0, the asynchronous lease RENEW
heartbeat can return NFS4ERR_LEASE_MOVED. Error recovery logic for
async RENEW is a separate code path from the generic NFS proc paths,
so it must be updated to handle NFS4ERR_LEASE_MOVED as well.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently the Linux NFS client ignores the operation status code for
the RELEASE_LOCKOWNER operation. Like NFSv3's UMNT operation,
RELEASE_LOCKOWNER is a courtesy to help servers manage their
resources, and the outcome is not consequential for the client.
During a migration, a server may report NFS4ERR_LEASE_MOVED, in
which case the client really should retry, since typically
LEASE_MOVED has nothing to do with the current operation, but does
prevent it from going forward.
Also, it's important for a client to respond as soon as possible to
a moved lease condition, since the client's lease could expire on
the destination without further action by the client.
NFS4ERR_DELAY is not included in the list of valid status codes for
RELEASE_LOCKOWNER in RFC 3530bis. However, rfc3530-migration-update
does permit migration-capable servers to return DELAY to clients,
but only in the context of an ongoing migration. In this case the
server has frozen lock state in preparation for migration, and a
client retry would help the destination server purge unneeded state
once migration recovery is complete.
Interestly, NFS4ERR_MOVED is not valid for RELEASE_LOCKOWNER, even
though lock owners can be migrated with Transparent State Migration.
Note that RFC 3530bis section 9.5 includes RELEASE_LOCKOWNER in the
list of operations that renew a client's lease on the server if they
succeed. Now that our client pays attention to the operation's
status code, we can note that renewal appropriately.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
A migration on the FSID in play for the current NFS operation
is reported via the error status code NFS4ERR_MOVED.
"Lease moved" means that a migration has occurred on some other
FSID than the one for the current operation. It's a signal that
the client should take action immediately to handle a migration
that it may not have noticed otherwise. This is so that the
client's lease does not expire unnoticed on the destination server.
In NFSv4.0, a moved lease is reported with the NFS4ERR_LEASE_MOVED
error status code.
To recover from NFS4ERR_LEASE_MOVED, check each FSID for that server
to see if it is still present. Invoke nfs4_try_migration() if the
FSID is no longer present on the server.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Introduce a mechanism for probing a server to determine if an FSID
is present or absent.
The on-the-wire compound is different between minor version 0 and 1.
Minor version 0 appends a RENEW operation to identify which client
ID is probing. Minor version 1 has a SEQUENCE operation in the
compound which effectively carries the same information.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When a server returns NFS4ERR_MOVED during a delegation recall,
trigger the new migration recovery logic in the state manager.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When a server returns NFS4ERR_MOVED, trigger the new migration
recovery logic in the state manager.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
I'm going to use this exit label also for migration recovery
failures.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Migration recovery and state recovery must be serialized, so handle
both in the state manager thread.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
NFS_SB() returns the pointer to an nfs_server struct, given a
pointer to a super_block. But we have no way to go back the other
way.
Add a super_block backpointer field so that, given an nfs_server
struct, it is easy to get to the filesystem's root dentry.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The nfs4_proc_fs_locations() function is invoked during referral
processing to perform a GETATTR(fs_locations) on an object's parent
directory in order to discover the target of the referral. It
performs a LOOKUP in the compound, so the client needs to know the
parent's file handle a priori.
Unfortunately this function is not adequate for handling migration
recovery. We need to probe fs_locations information on an FSID, but
there's no parent directory available for many operations that
can return NFS4ERR_MOVED.
Another subtlety: recovering from NFS4ERR_LEASE_MOVED is a process
of walking over a list of known FSIDs that reside on the server, and
probing whether they have migrated. Once the server has detected
that the client has probed all migrated file systems, it stops
returning NFS4ERR_LEASE_MOVED.
A minor version zero server needs to know what client ID is
requesting fs_locations information so it can clear the flag that
forces it to continue returning NFS4ERR_LEASE_MOVED. This flag is
set per client ID and per FSID. However, the client ID is not an
argument of either the PUTFH or GETATTR operations. Later minor
versions have client ID information embedded in the compound's
SEQUENCE operation.
Therefore, by convention, minor version zero clients send a RENEW
operation in the same compound as the GETATTR(fs_locations), since
RENEW's one argument is a clientid4. This allows a minor version
zero server to identify correctly the client that is probing for a
migration.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Allow code in nfsv4.ko to use _nfs_display_fhandle().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The differences between minor version 0 and minor version 1
migration will be abstracted by the addition of a set of migration
recovery ops.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Introduce functions that can walk through an array of returned
fs_locations information and connect a transport to one of the
destination servers listed therein.
Note that NFS minor version 1 introduces "fs_locations_info" which
extends the locations array sorting criteria available to clients.
This is not supported yet.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
New function nfs4_update_server() moves an nfs_server to a different
nfs_client. This is done as part of migration recovery.
Though it may be appealing to think of them as the same thing,
migration recovery is not the same as following a referral.
For a referral, the client has not descended into the file system
yet: it has no nfs_server, no super block, no inodes or open state.
It is enough to simply instantiate the nfs_server and super block,
and perform a referral mount.
For a migration, however, we have all of those things already, and
they have to be moved to a different nfs_client. No local namespace
changes are needed here.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cached opens have already been handled by _nfs4_opendata_reclaim_to_nfs4_state
and can safely skip being reprocessed, but must still call update_open_stateid
to make sure that all active fmodes are recovered.
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Cc: stable@vger.kernel.org # 3.7.x: f494a6071d3: NFSv4: fix NULL dereference
Cc: stable@vger.kernel.org # 3.7.x: a43ec98b72a: NFSv4: don't fail on missin
Cc: stable@vger.kernel.org # 3.7.x
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently, if the call to nfs_refresh_inode fails, then we end up leaking
a reference count, due to the call to nfs4_get_open_state.
While we're at it, replace nfs4_get_open_state with a simple call to
atomic_inc(); there is no need to do a full lookup of the struct nfs_state
since it is passed as an argument in the struct nfs4_opendata, and
is already assigned to the variable 'state'.
Cc: stable@vger.kernel.org # 3.7.x: a43ec98b72a: NFSv4: don't fail on missing
Cc: stable@vger.kernel.org # 3.7.x
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This is an unneeded check that could cause the client to fail to recover
opens.
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The current caching model calls for the security label to be set on
first lookup and/or on any subsequent label changes. There is no
need to do it as part of an open reclaim.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
nfs_parse_mount_options returns 0 on error, not -errno.
Reported-by: Karel Zak <kzak@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
As of commit 5d422301f9 we no longer zero the
state.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The only call site for check_smb_header() assigns 'mid' from the SMB
packet, which is then checked again in check_smb_header(). This seems
like redundant redundancy.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Tim Gardner <timg@tpi.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Currently SMB2 and SMB3 mounts do not query the file system attributes
from the server at mount time as is done for cifs. These can be useful for debugging.
Signed-off-by: Steve French <smfrench@gmail.com>
Allow cifs/smb2/smb3 to return whether or not a file is compressed
via lsattr, and allow SMB2/SMB3 to set the per-file compression
flag ("chattr +c filename" on an smb3 mount).
Windows users often set the compressed flag (it can be
done from the desktop and file manager). David Disseldorp
has patches to Samba server to support this (at least on btrfs)
which are complementary to this
Signed-off-by: Steve French <smfrench@gmail.com>
We were off by one calculating the length of ioctls in some cases
because the protocol specification for SMB2 ioctl includes a mininum
one byte payload but not all SMB2 ioctl requests actually have
a data buffer to send. We were also not zeroing out the
return buffer (in case of error this is helpful).
Signed-off-by: Steve French <smfrench@gmail.com>
The deadlock is found through the following scenario.
sys_mkdir()
-> f2fs_add_link()
-> __f2fs_add_link()
-> init_inode_metadata()
: lock_page(inode);
-> f2fs_init_acl()
-> f2fs_set_acl()
-> f2fs_setxattr(..., NULL)
: This NULL page incurs a deadlock at update_inode_page().
So, likewise f2fs_init_security(), this patch adds a parameter to transfer the
locked inode page to f2fs_setxattr().
Found by Linux File System Verification project (linuxtesting.org).
Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Only one dirty type is set in __locate_dirty_segment and we can know
dirty type of segment. So we don't need to check other dirty types.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
We should not support the MLC nand for jffs2. So if the nand type is
MLC, we quit immediatly.
Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
The description text for CONFIG_NFSD_V4_SECURITY_LABEL has an unpaired
quote sign which breaks syntax highlighting for the nfsd Kconfig file.
Remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
With power-cut emulation, it is possible that sometimes no data at all is
corrupted and that confusing messages are printed due to errors in the
computation of data corruption range.
[1] The start of the range should be [0..len-1], not [0..len].
[2] The end of the range should always be at least 1 greater than the start.
Signed-off-by: Mats Karrman <mats.karrman@tritech.se>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Fix to return -ENOMEM in the kmalloc() and d_make_root() error handling
case instead of 0, as done elsewhere in those functions.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
This issue was first pointed out by Jiaxing Wang several months ago, but no
further comments:
https://lkml.org/lkml/2013/6/29/41
As we know pread() does not change f_pos, so after pread(), file->f_pos
and m->read_pos become different. And seq_lseek() does not update file->f_pos
if offset equals to m->read_pos, so after pread() and seq_lseek()(lseek to
m->read_pos), then a subsequent read may read from a wrong position, the
following program produces the problem:
char str1[32] = { 0 };
char str2[32] = { 0 };
int poffset = 10;
int count = 20;
/*open any seq file*/
int fd = open("/proc/modules", O_RDONLY);
pread(fd, str1, count, poffset);
printf("pread:%s\n", str1);
/*seek to where m->read_pos is*/
lseek(fd, poffset+count, SEEK_SET);
/*supposed to read from poffset+count, but this read from position 0*/
read(fd, str2, count);
printf("read:%s\n", str2);
out put:
pread:
ck_netbios_ns 12665
read:
nf_conntrack_netbios
/proc/modules:
nf_conntrack_netbios_ns 12665 0 - Live 0xffffffffa038b000
nf_conntrack_broadcast 12589 1 nf_conntrack_netbios_ns, Live 0xffffffffa0386000
So we always update file->f_pos to offset in seq_lseek() to fix this issue.
Signed-off-by: Jiaxing Wang <hello.wjx@gmail.com>
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Previously, set_page_dirty is called every time after writting one summary info
into compacted summary page,
To avoid redundant set_page_dirty, we only call set_page_dirty before release
page.
Signed-off-by: Yu Chao <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch adds a control method in sysfs to reclaim prefree segments.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch merges some background jobs into this new function.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Previously, f2fs postpones reclaiming prefree segments into free segments
as much as possible.
However, if user writes and deletes a bunch of data without any sync or fsync
calls, some flash storages can suffer from garbage collections.
So, this patch adds the reclaiming codes to f2fs_write_node_pages and background
GC thread.
If there are a lot of prefree segments, let's do checkpoint so that f2fs
submits discard commands for the prefree regions to the flash storage.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
- Fix long standing memory leak in the (rarely used) public key support
- Fix large file corruption on 32 bit architectures
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
iQIcBAABCgAGBQJSaX/HAAoJENaSAD2qAscKdpQQAI6Rvsv5y/Gj+8/9rCUnNYhw
8YWYkOko2+cyGl6ro+nIm2nmKOuaGrjijvubOjOAe4WkMzS0EyJjku/9NT3S6KzC
SqHC0ZeZf0jaFC9zUkUN69RY9m96Ak94HAagXO3Qm39DCSj8xijxODOVnVzkEs2x
ylOU8OgRbD/AIDzmLxgHaOtuAmQ0GNvbVoYK6ZErVmOMENU2/67iH3OsyGD4OFpr
Oaq1i8m7rxPmwv3QNSGhXSK6EScqs2jgM4aPWx3aG+OhYv6sGWkL8jJgPS/uSUBc
ttD1Ou/d9yyvZPDFd9wmiHhenbCVbEdl6JAIS8zKv4NkSQ3V7AVWwAoe6JMfbREo
U+Om7FwGLgKlZ/19+IxBMGTITuOjUkKq97vJMiYbXuWzdrZSflv5GiGGKbxchmnA
CnfYaN1HYVcpLsbXoDTBomML7VTtbifgmY0diUJ2aJ1eTg86Gs1DXjhnuLF70Jjd
dfuYfOKkJguuRfZ50yrpWfEQ0iOudXI1v+PrramLof33lNKWI8XeKjgDxyUrAjOZ
UjFT639EXIRzYDIOCPZicQKdNO3BRziKi1cSnXQQp9cNTMs6/FIxK2zrQmjgqvww
Hwj+M6czLs45lbfjQIxi3FlEAYYdXBQwrEiAu4cmt9j1bxIZnwIa7Fu0bXSxphfD
dUo0GN7CkF45BkNvotFX
=74EV
-----END PGP SIGNATURE-----
Merge tag 'ecryptfs-3.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs
Pull ecryptfs fixes from Tyler Hicks:
"Two important fixes
- Fix long standing memory leak in the (rarely used) public key
support
- Fix large file corruption on 32 bit architectures"
* tag 'ecryptfs-3.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
eCryptfs: fix 32 bit corruption issue
ecryptfs: Fix memory leakage in keystore.c
Before patch(sysfs: prepare path write for unified regular / bin
file handling), when size of bin file is zero, writting still can
continue, but this patch changes the behaviour.
The worse thing is that firmware loader is broken by this patch,
and user space application can't write to firmware bin file any more
because both firmware loader and drivers can't know at advance how
large the firmware file is and have to set its initialized size as
zero.
This patch fixes the problem and keeps behaviour of writting to bin
as before.
Reported-by: Lothar Waßmann <LW@karo-electronics.de>
Tested-by: Lothar Waßmann <LW@karo-electronics.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
...which just returns -EBUSY if a directory alias would be created.
This is to be used by fuse mkdir to make sure that a buggy or malicious
userspace filesystem doesn't do anything nasty. Previously fuse used a
private mutex for this purpose, which can now go away.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Instead of passing the direction as argument (and checking it on every
step through the hash chain), just have separate __lookup_mnt() and
__lookup_mnt_last(). And use the standard iterators...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
aka br_write_{lock,unlock} of vfsmount_lock. Inlines in fs/mount.h,
vfsmount_lock extern moved over there as well.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
wake_up_interruptible/poll_wait provide sufficient barriers;
just use ACCESS_ONCE() to fetch ns->event and that's it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If the underlying dentry doesn't have ->d_revalidate(), there's no need to
force dropping out of RCU mode. All we need for that is to make freeing
ecryptfs_dentry_info RCU-delayed.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Shifting page->index on 32 bit systems was overflowing, causing
data corruption of > 4GB files. Fix this by casting it first.
https://launchpad.net/bugs/1243636
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reported-by: Lars Duesing <lars.duesing@camelotsweb.de>
Cc: stable@vger.kernel.org # v3.11+
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
xfs_rtalloc.c is partially shared with userspace. Split the file up
into two parts - one that is kernel private and the other which is
wholly shared with userspace.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Currently the xfs_inode.h header has a dependency on the definition
of the BMAP btree records as the inode fork includes an array of
xfs_bmbt_rec_host_t objects in it's definition.
Move all the btree format definitions from xfs_btree.h,
xfs_bmap_btree.h, xfs_alloc_btree.h and xfs_ialloc_btree.h to
xfs_format.h to continue the process of centralising the on-disk
format definitions. With this done, the xfs inode definitions are no
longer dependent on btree header files.
The enables a massive culling of unnecessary includes, with close to
200 #include directives removed from the XFS kernel code base.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
xfs_trans.h has a dependency on xfs_log.h for a couple of
structures. Most code that does transactions doesn't need to know
anything about the log, but this dependency means that they have to
include xfs_log.h. Decouple the xfs_trans.h and xfs_log.h header
files and clean up the includes to be in dependency order.
In doing this, remove the direct include of xfs_trans_reserve.h from
xfs_trans.h so that we remove the dependency between xfs_trans.h and
xfs_mount.h. Hence the xfs_trans.h include can be moved to the
indicate the actual dependencies other header files have on it.
Note that these are kernel only header files, so this does not
translate to any userspace changes at all.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
We don't do callbacks at transaction commit time, no do we have any
infrastructure to set up or run such callbacks, so remove the
variables and typedefs for these operations. If we ever need to add
callbacks, we can reintroduce the variables at that time.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Parts of userspace want to be able to read and modify dquot buffers
(e.g. xfs_db) so we need to split out the reading and writing of
these buffers so it is easy to shared code with libxfs in userspace.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
The on-disk format definitions for the directory and attribute
structures are spread across 3 header files right now, only one of
which is dedicated to defining on-disk structures and their
manipulation (xfs_dir2_format.h). Pull all the format definitions
into a single header file - xfs_da_format.h - and switch all the
code over to point at that.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
All of the buffer operations structures are needed to be exported
for xfs_db, so move them all to a common location rather than
spreading them all over the place. They are verifying the on-disk
format, so while xfs_format.h might be a good place, it is not part
of the on disk format.
Hence we need to create a new header file that we centralise these
related definitions. Start by moving the bffer operations
structures, and then also move all the other definitions that have
crept into xfs_log_format.h and xfs_format.h as there was no other
shared header file to put them in.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
In ubifs_garbage_collect,local variable "space_before" calculate twice. In
fact, at the beginning of the loop, there is no need to calculate this
variable. Calculate it before call "ubifs_garbage_collect_leb" is enough. This
patch just remove the unnecessary calculate code.
Signed-off-by: wang bo <wang.bo116@zte.com.cn>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Introduce the unfailed version of kmem_cache_alloc named f2fs_kmem_cache_alloc
to hide the retry routine and make the code a bit cleaner.
v2:
Fix the wrong use of 'retry' tag pointed out by Gao feng.
Use more neat code to remove redundant tag suggested by Haicheng Li.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Move kernel-doc notation to immediately before its function to eliminate
kernel-doc warnings introduced by commit db14fc3abc ("vfs: add
d_walk()")
Warning(fs/dcache.c:1343): No description found for parameter 'data'
Warning(fs/dcache.c:1343): No description found for parameter 'dentry'
Warning(fs/dcache.c:1343): Excess function parameter 'parent' description in 'check_mount'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Miklos Szeredi <mszeredi@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add @path parameter to fix kernel-doc warning.
Also fix a spello/typo.
Warning(fs/namei.c:2304): No description found for parameter 'path'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Because one dirty seg can only be mapped to one dirty_type. Otherwise, it's a bug.
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
[Jaegeuk Kim: modify a comment related to this patch]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Liu Bo