Use a bit-mask of EOF irqs to determine when all required idmac
channel EOFs have been received for a tile conversion, and only do
tile completion processing after all EOFs have been received. Otherwise
it was found that a conversion would stall after the completion of a
tile and the start of the next tile, because the input/read idmac
channel had not completed and entered idle state, thus locking up the
channel when attempting to re-start it for the next tile.
Fixes: 0537db801b ("gpu: ipu-v3: image-convert: reconfigure IC per tile")
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Combine the rotate_irq() and norotate_irq() handlers into a single
eof_irq() handler.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
RGB32 and BGR32 formats were inadvertently removed from the switch
statement in ipu_pixelformat_to_colorspace(). Restore them.
Fixes: a59957172b ("gpu: ipu-v3: enable remaining 32-bit RGB V4L2 pixel formats")
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The first pixel of the next tile is only sampled by the hardware if the
fractional input position corresponding to the last written output pixel
is not an integer position.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Burst aligned input and output width can be calculated once per column,
instead of repeatedly for each tile in the column. The same goes for
input and output height per row. Also don't round up the same values
repeatedly.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
If we managed to create tiles sized 0x0 because of a bug in the seam
calculation, return with an error message instead of letting the driver
run into a division by zero later. Also check for tile sizes that are
larger than supported by the hardware.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This patch effectively reverts commit 912bbf7e9c ("gpu: ipu-v3:
image-convert: Fix image downsize coefficients") and replaces it with a
different solution based on the preceding patches.
The previous fix tried to solve the problem of intermediate tile size
between IC downsizing and main processing sections not being limited to
1024 pixels by downsizing the input image to a smaller intermediate size
in the downsizing box filter. This causes unnecessary blurring,
especially for scaling factors close to 1.
Now that the seam position calculation makes sure that the 1024 pixel
intermediate tile size limit is not exceeded, calculate the number of
tiles from the maximum of intermediate size and output size and avoid
unnecessary downsizing.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Limit the input seam position to an interval that guarantees the tile
size does not exceed 1024 pixels after the IC downsizing section and
that space is left for the next tile.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This fixes a failure to determine any seam if the output size is
exactly 1024 multiplied by the number of tiles in a given direction.
In that case an empty interval out_start == out_end is being passed
to find_best_seam, which looks for a seam out_start <= x < out_end.
Also reduce the interval for all but the left column / top row, to
avoid returning position 0 as best fit.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Support is already implemented for the corresponding DRM formats,
just hook up the remaining V4L2 pixel formats.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
For the write channels with 4:2:0 subsampled YUV formats, avoid chroma
overdraw by only writing chroma for even lines (skip odd chroma rows).
This reduces necessary write memory bandwidth by at least 25% (more
with rotation enabled).
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add support for Rec.709 encoding and inverse encoding.
Reported-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add support for encodings to or from limited range quantization.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Only providing the input and output RGB/YUV space to the IC task init
functions is not sufficient. To fully characterize a colorspace
conversion, the Y'CbCr encoding standard, and quantization also
need to be specified.
Define a 'struct ipu_ic_colorspace' that includes all the above.
This allows to actually enforce the fact that the IC:
- can only encode to/from YUV and RGB full range. A follow-up patch will
remove this restriction.
- can only encode using BT.601 standard. A follow-up patch will add
Rec.709 encoding support.
The determination of the CSC coefficients based on the input/output
'struct ipu_ic_colorspace' are moved to a new exported function
ipu_ic_calc_csc(), and 'struct ic_csc_params' is exported as
'struct ipu_ic_csc_params'. ipu_ic_calc_csc() fills a 'struct ipu_ic_csc'
with the input/output 'struct ipu_ic_colorspace' and the calculated
'struct ic_csc_params' from those input/output colorspaces.
The functions ipu_ic_task_init(_rsc)() now take a filled 'struct
ipu_ic_csc'.
The existing CSC coefficient tables and ipu_ic_calc_csc() are moved
to a new module ipu-ic-csc.c. This is in preparation for adding more
coefficient tables for limited range quantization and more encoding
standards.
The existing ycbcr2rgb and inverse rgb2ycbcr tables defined the BT.601
Y'CbCr encoding coefficients. The rgb2ycbcr table specifically described
the BT.601 encoding from full range RGB to full range YUV. Table
comments have been added in ipu-ic-csc.c to make this more clear.
The ycbcr2rgb inverse table described encoding YUV limited range to RGB
full range. To be consistent with the rgb2ycbcr table, this table is
converted to YUV full range to RGB full range, and the comments are
expanded in ipu-ic-csc.c.
The ic_csc_rgb2rgb table was just an identity matrix, so it is renamed
'identity' in ipu-ic-csc.c.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
[p.zabel@pengutronix.de: removed a superfluous blank line]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The saturation bit was being set at bit 9 in the second 32-bit word
of the TPMEM CSC. This isn't correct, the saturation bit is bit 42,
which is bit 10 of the second word.
Fixes: 1aa8ea0d2b ("gpu: ipu-v3: Add Image Converter unit")
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The output of the IC downsizer unit in both dimensions must be <= 1024
before being passed to the IC resizer unit. This was causing corrupted
images when:
input_dim > 1024, and
input_dim / 2 < output_dim < input_dim
Some broken examples were 1920x1080 -> 1024x768 and 1920x1080 ->
1280x1080.
Fixes: 70b9b6b3bc ("gpu: ipu-v3: image-convert: calculate per-tile
resize coefficients")
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The input bytesperline calculation for packed pixel formats was
incorrect. The min/max clamping values must be multiplied by the
packed bits-per-pixel. This was causing corrupted converted images
when the input format was RGB4 (probably also other input packed
formats).
Fixes: d966e23d61 ("gpu: ipu-v3: image-convert: fix bytesperline
adjustment")
Reported-by: Harsha Manjula Mallikarjun <Harsha.ManjulaMallikarjun@in.bosch.com>
Suggested-by: Harsha Manjula Mallikarjun <Harsha.ManjulaMallikarjun@in.bosch.com>
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The output width and height alignment values were being used in the
input bytesperline calculation. Fix by separating local vars w_align
and h_align into w_align_in, h_align_in, w_align_out, and h_align_out.
Fixes: d966e23d61 ("gpu: ipu-v3: image-convert: fix bytesperline
adjustment")
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation this program
is distributed in the hope it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 263 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
the code contained herein is licensed under the gnu general public
license you may obtain a copy of the gnu general public license
version 2 or later at the following locations http www opensource
org licenses gpl license html http www gnu org copyleft gpl html
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 161 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.383790741@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 3 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [kishon] [vijay] [abraham]
[i] [kishon]@[ti] [com] this program is distributed in the hope that
it will be useful but without any warranty without even the implied
warranty of merchantability or fitness for a particular purpose see
the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [graeme] [gregory]
[gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
[kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
[hk] [hemahk]@[ti] [com] this program is distributed in the hope
that it will be useful but without any warranty without even the
implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1105 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Initialize the flow input colorspaces to unknown and reset to that value
when the channel gets disabled. This avoids the state getting mixed up
with a previous mode.
Also keep the CSC settings for the background flow intact when disabling
the foreground flow.
Root-caused-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
-----BEGIN PGP SIGNATURE-----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=tD1x
-----END PGP SIGNATURE-----
Merge tag 'media/v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- remove sensor drivers that got converted from soc_camera
- remaining soc_camera drivers got moved to staging
- some documentation cleanups and improvements
- the imx staging driver now supports imx7
- the ov9640, mt9m001 and mt9m111 got converted from soc_camera
- the vim2m driver now does what a m2m convert driver expects to do
- epoll() fixes on media subsystems
- several drivers fixes, typos, cleanups and improvements
* tag 'media/v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (346 commits)
media: dvb/earth-pt1: fix wrong initialization for demod blocks
media: vim2m: Address some coding style issues
media: vim2m: don't use BUG()
media: vim2m: speedup passthrough copy
media: vim2m: add an horizontal scaler
media: vim2m: don't accept YUYV anymore as output format
media: vim2m: add vertical linear scaler
media: vim2m: better handle cap/out buffers with different sizes
media: vim2m: use different framesizes for bayer formats
media: vim2m: add support for VIDIOC_ENUM_FRAMESIZES
media: vim2m: ensure that width is multiple of two
media: vim2m: improve debug messages
media: vim2m: add bayer capture formats
media: a few more typos at staging, pci, platform, radio and usb
media: Documentation: fix several typos
media: staging: fix several typos
media: include: fix several typos
media: common: fix several typos
media: v4l2-core: fix several typos
media: usb: fix several typos
...
This allows channels using the PRG to check if a requested configuration
update has been applied or is still pending.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
[p.zabel@pengutronix.de: inverted logic: done -> pending]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This allows the upper layers to check if a double buffer update has
been applied by the PRE or is still pending.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
[p.zabel@pengutronix.de: inverted logic: done -> pending]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlxqHJYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGWl8H/jPI4EipzD2GbnjZ
GaFpMBBjcXBaVmoA+Y69so+7BHx1Ql+5GQtqbK0RHJRb9qEPLw3FBhHNjM/N8Sgf
nSrK+GnBZp9s+k/NR/Yf2RacUR3jhz+Q9JEoQd3u9bFUeQyvE8Rf3vgtoBBwFOfz
+t7N1memYVF3asLGWB4e4sP1YVMGfseTQpSPojvM30YWM86Bv+QtSx1AGgHczQIM
kMKealR8ZPelN6JAXgLhQ5opDojBrE4YKB98pwsMDI6abz0Tz2JLFEUTTxsv5XNN
o/Iz+XDoylskEyxN2unNWfHx7Swkvoklog8J/hDg5XlTvipL/WkT66PHBgcGMNvj
BW9GgU8=
=ZizU
-----END PGP SIGNATURE-----
Merge tag 'v5.0-rc7' into patchwork
Linux 5.0-rc7
* tag 'v5.0-rc7': (1667 commits)
Linux 5.0-rc7
Input: elan_i2c - add ACPI ID for touchpad in Lenovo V330-15ISK
Input: st-keyscan - fix potential zalloc NULL dereference
Input: apanel - switch to using brightness_set_blocking()
powerpc/64s: Fix possible corruption on big endian due to pgd/pud_present()
efi/arm: Revert "Defer persistent reservations until after paging_init()"
arm64, mm, efi: Account for GICv3 LPI tables in static memblock reserve table
sunrpc: fix 4 more call sites that were using stack memory with a scatterlist
include/linux/module.h: copy __init/__exit attrs to init/cleanup_module
Compiler Attributes: add support for __copy (gcc >= 9)
lib/crc32.c: mark crc32_le_base/__crc32c_le_base aliases as __pure
auxdisplay: ht16k33: fix potential user-after-free on module unload
x86/platform/UV: Use efi_runtime_lock to serialise BIOS calls
i2c: bcm2835: Clear current buffer pointers and counts after a transfer
i2c: cadence: Fix the hold bit setting
drm: Use array_size() when creating lease
dm thin: fix bug where bio that overwrites thin block ignores FUA
Revert "exec: load_script: don't blindly truncate shebang string"
Revert "gfs2: read journal in large chunks to locate the head"
net: ethernet: freescale: set FEC ethtool regs version
...
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
On a NOP double buffer update where current buffer address is the same
as the next buffer address, the SDW_UPDATE bit clears too late. As we
are now using this bit to determine when it is safe to signal flip
completion to userspace this will delay completion of atomic commits
where one plane doesn't change the buffer by a whole frame period.
Fix this by remembering the last buffer address and just skip the
double buffer update if it would not change the buffer address.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
[p.zabel@pengutronix.de: initialize last_bufaddr in ipu_pre_configure]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The CSI offsets are wrong for both CSI0 and CSI1. They are at
physical address 0x1e030000 and 0x1e038000 respectively.
Fixes: 2ffd48f2e7 ("gpu: ipu-v3: Add Camera Sensor Interface unit")
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The CSI0/CSI1 registers offset is at +0xe030000/+0xe038000 relative
to the control module registers on IPUv3EX.
This patch fixes wrong values for i.MX51 CSI0/CSI1.
Fixes: 2ffd48f2e7 ("gpu: ipu-v3: Add Camera Sensor Interface unit")
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
To support interlaced scan with planar formats, cpmem SLUV must
be programmed with the correct chroma line stride. For full and
partial planar 4:2:2 (YUV422P, NV16), chroma line stride must
be doubled. For full and partial planar 4:2:0 (YUV420, YVU420, NV12),
chroma line stride must _not_ be doubled, since a single chroma line
is shared by two luma lines.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The function ipu_csi_init_interface() was inverting the F-bit for
NTSC case, in the CCIR_CODE_1/2 registers. The result being that
for NTSC bottom-top field order, the CSI would swap fields and
capture in top-bottom order.
Instead, base field swap on the field order of the input to the CSI,
and the field order of the requested output. If the input/output
fields are sequential but different, swap fields, otherwise do
not swap. This requires passing both the input and output mbus
frame formats to ipu_csi_init_interface().
Move this code to a new private function ipu_csi_set_bt_interlaced_codes()
that programs the CCIR_CODE_1/2 registers for interlaced BT.656 (and
possibly interlaced BT.1120 in the future).
When detecting input video standard from the input frame width/height,
make sure to double height if input field type is alternate, since
in that case input height only includes lines for one field.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
If width or height are in the [2049, 3072] range, allow to
use just three tiles in this dimension, instead of four.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Steve Longerbeam <slongerbeam@gmail.com>
Tested-by: Steve Longerbeam <slongerbeam@gmail.com>
Double-buffering only works if tile sizes are the same and the resizing
coefficient does not change between tiles, even for non-planar formats.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Steve Longerbeam <slongerbeam@gmail.com>
Tested-by: Steve Longerbeam <slongerbeam@gmail.com>
Visualize the scaling and rotation pipeline with some ASCII art
diagrams. Remove the FIXME comment about missing seam prevention.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Steve Longerbeam <slongerbeam@gmail.com>
For planar formats, bytesperline does not depend on BPP. It must always
be larger than width and aligned to tile width alignment restrictions.
The input bytesperline to ipu_image_convert_adjust() may be
uninitialized, so don't rely on input bytesperline as the
minimum value for clamp_align(). Use 2 << w_align as the minimum
instead.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
[slongerbeam@gmail.com: clamp input bytesperline]
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
For the planar but U/V-packed formats NV12 and NV16, 8 pixel width
alignment is good enough to fulfill the 8 byte stride requirement.
If we allow the input 8-pixel DMA bursts to overshoot the end of the
line, the only input alignment restrictions are dictated by the pixel
format and 8-byte aligned line start address.
Since different tile sizes are allowed, the output tile with / height
alignment doesn't need to be multiplied by number of columns / rows.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
[slongerbeam@gmail.com: Bring in the fixes to format width and
height alignment restrictions from imx-media-mem2mem.c.]
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Since tile dimensions now vary between tiles, add debug output for each
tile's position and dimensions.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Steve Longerbeam <slongerbeam@gmail.com>
Tested-by: Steve Longerbeam <slongerbeam@gmail.com>
Select seam positions that minimize distortions during seam hiding while
satifying input and output IDMAC, rotator, and image format constraints.
This code looks for aligned output seam positions that minimize the
difference between the fractional corresponding ideal input positions
and the input positions rounded to alignment requirements.
Since now tiles can be sized differently, alignment restrictions of the
complete image can be relaxed in the next step.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Steve Longerbeam <slongerbeam@gmail.com>
Tested-by: Steve Longerbeam <slongerbeam@gmail.com>
Move tile_width_align and tile_height_align up so they
can be used by the tile edge position calculation code.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Steve Longerbeam <slongerbeam@gmail.com>
Tested-by: Steve Longerbeam <slongerbeam@gmail.com>
This will allow to calculate seam positions after initializing the
ipu_image base structure but before calculating tile dimensions.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Steve Longerbeam <slongerbeam@gmail.com>
Tested-by: Steve Longerbeam <slongerbeam@gmail.com>
Store tile top/left position in pixels in the tile structure.
This will allow overlapping tiles with different sizes later.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Steve Longerbeam <slongerbeam@gmail.com>
Tested-by: Steve Longerbeam <slongerbeam@gmail.com>
For differently sized tiles or if the resizing coefficients change,
we have to stop, reconfigure, and restart the IC between tiles.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Steve Longerbeam <slongerbeam@gmail.com>
Tested-by: Steve Longerbeam <slongerbeam@gmail.com>
Slightly modifying resize coefficients per-tile allows to completely
hide the seams between tiles and to sample the correct input pixels at
the bottom and right edges of the image.
Tiling requires a bilinear interpolator reset at each tile start, which
causes the image to be slightly shifted if the starting pixel should not
have been sampled from an integer pixel position in the source image
according to the full image resizing ratio. To work around this
hardware limitation, calculate per-tile resizing coefficients that make
sure that the correct input pixels are sampled at the tile end.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Steve Longerbeam <slongerbeam@gmail.com>
Tested-by: Steve Longerbeam <slongerbeam@gmail.com>
Let convert_start start from a given tile index, allocate intermediate
tile with maximum tile size.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Steve Longerbeam <slongerbeam@gmail.com>
Tested-by: Steve Longerbeam <slongerbeam@gmail.com>
Catch calculated tile offsets that are not 8-byte aligned as required by the
IDMAC engine and return error in calc_tile_offsets().
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Gustavo A. R. Silva