Originally, calling ceph_get_fmode() for open files is by thread that
handles request reply. There is a small window between updating caps and
and waking the request initiator. We need to prevent ceph_check_caps()
from releasing wanted caps in the window.
Previous patches made fill_inode() call __ceph_touch_fmode() for open file
requests. This prevented ceph_check_caps() from releasing wanted caps for
'caps_wanted_delay_min' seconds, enough for request initiator to get
woken up and call ceph_get_fmode().
This allows us to now call ceph_get_fmode() in ceph_open() instead.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
__ceph_caps_file_wanted() already checks 'caps_wanted_delay_min' and
'caps_wanted_delay_max'. There is no need to duplicate the logic in
ceph_check_caps() and __send_cap()
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add i_last_rd and i_last_wr to ceph_inode_info. These fields are
used to track the last time the client acquired read/write caps for
the inode.
If there is no read/write on an inode for 'caps_wanted_delay_max'
seconds, __ceph_caps_file_wanted() does not request caps for read/write
even there are open files.
Call __ceph_touch_fmode() for dir operations. __ceph_caps_file_wanted()
calculates dir's wanted caps according to last dir read/modification. If
there is recent dir read, dir inode wants CEPH_CAP_ANY_SHARED caps. If
there is recent dir modification, also wants CEPH_CAP_FILE_EXCL.
Readdir is a special case. Dir inode wants CEPH_CAP_FILE_EXCL after
readdir, as with that, modifications do not need to release
CEPH_CAP_FILE_SHARED or invalidate all dentry leases issued by readdir.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Original code only renews caps for inodes with CEPH_I_CAP_DROPPED flag,
which indicates that mds has closed the session and caps were dropped.
Remove this flag in preparation for not requesting caps for idle open
files.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Otherwise ceph_d_delete() may return 1 for the dentry, which makes
dput() prune the dentry and clear parent dir's complete flag.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
With the Octopus release, the MDS will hand out directory create caps.
If we have Fxc caps on the directory, and complete directory information
or a known negative dentry, then we can return without waiting on the
reply, allowing the open() call to return very quickly to userland.
We use the normal ceph_fill_inode() routine to fill in the inode, so we
have to gin up some reply inode information with what we'd expect the
newly-created inode to have. The client assumes that it has a full set
of caps on the new inode, and that the MDS will revoke them when there
is conflicting access.
This functionality is gated on the wsync/nowsync mount options.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If a create is done, then typically we'll end up writing to the file
soon afterward. We don't want to wait for the reply before doing that
when doing an async create, so that means we need the layout for the
new file before we've gotten the response from the MDS.
All files created in a directory will initially inherit the same layout,
so copy off the requisite info from the first synchronous create in the
directory, and save it in a new i_cached_layout field. Zero out the
layout when we lose Dc caps in the dir.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add new request field to hold the delegated inode number. Encode that
into the message when it's set.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Starting in Octopus, the MDS will hand out caps that allow the client
to do asynchronous file creates under certain conditions. As part of
that, the MDS will delegate ranges of inode numbers to the client.
Add the infrastructure to decode these ranges, and stuff them into an
xarray for later consumption by the async creation code.
Because the xarray code currently only handles unsigned long indexes,
and those are 32-bits on 32-bit arches, we only enable the decoding when
running on a 64-bit arch.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The MDS is getting a new lock-caching facility that will allow it
to cache the necessary locks to allow asynchronous directory operations.
Since the CEPH_CAP_FILE_* caps are currently unused on directories,
we can repurpose those bits for this purpose.
When performing an unlink, if we have Fx on the parent directory,
and CEPH_CAP_DIR_UNLINK (aka Fr), and we know that the dentry being
removed is the primary link, then then we can fire off an unlink
request immediately and don't need to wait on reply before returning.
In that situation, just fix up the dcache and link count and return
immediately after issuing the call to the MDS. This does mean that we
need to hold an extra reference to the inode being unlinked, and extra
references to the caps to avoid races. Those references are put and
error handling is done in the r_callback routine.
If the operation ends up failing, then set a writeback error on the
directory inode, and the inode itself that can be fetched later by
an fsync on the dir.
The behavior of dir caps is slightly different from caps on normal
files. Because these are just considered an optimization, if the
session is reconnected, we will not automatically reclaim them. They
are instead considered lost until we do another synchronous op in the
parent directory.
Async dirops are enabled via the "nowsync" mount option, which is
patterned after the xfs "wsync" mount option. For now, the default
is "wsync", but eventually we may flip that.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If we don't have all of the cap bits for the want mask in
try_get_cap_refs, then just take refs on the need bits.
Signed-off-by: "Yan, Zheng" <ukernel@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Track and correctly handle directory caps for asynchronous operations.
Add aliases for Frc caps that we now designate at Dcu caps (when dealing
with directories).
Unlike file caps, we don't reclaim these when the session goes away, and
instead preemptively release them. In-flight async dirops are instead
handled during reconnect phase. The client needs to re-do a synchronous
operation in order to re-get directory caps.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Rename it to ceph_take_cap_refs and make it available to other files.
Also replace a comment with a lockdep assertion.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When we issue an async create, we must ensure that any later on-the-wire
requests involving it wait for the create reply.
Expand i_ceph_flags to be an unsigned long, and add a new bit that
MDS requests can wait on. If the bit is set in the inode when sending
caps, then don't send it and just return that it has been delayed.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Newer versions of the MDS will flag a dentry as "primary". In later
patches, we'll need to consult this info, so track it in di->flags.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
...and ensure that such requests are never queued. The MDS has need to
know that a request is asynchronous so add flags and proper
infrastructure for that.
Also, delegated inode numbers and directory caps are associated with the
session, so ensure that async requests are always transmitted on the
first attempt and are never queued to wait for session reestablishment.
If it does end up looking like we'll need to queue the request, then
have it return -EJUKEBOX so the caller can reattempt with a synchronous
request.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The last thing that this function does is release i_ceph_lock, so
have the caller do that instead. Add a lockdep assertion to
ensure that the function is always called with i_ceph_lock held.
Change the prototype to take a ceph_inode_info pointer and drop
the separate mdsc argument as we can get that from the session.
While at it, make it non-static. We'll need this to kick any
flushing caps once the create reply comes in.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
req->r_timeout is only used during mounting, so this error will
be more accurate.
URL: https://tracker.ceph.com/issues/44215
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This patch re-organizes copy_file_range, trying to fix a few issues in the
error handling. Here's the summary:
- Abort copy if initial do_splice_direct() returns fewer bytes than
requested.
- Move the 'size' initialization (with i_size_read()) further down in the
code, after the initial call to do_splice_direct(). This avoids issues
with a possibly stale value if a manual copy is done.
- Move the object copy loop into a separate function. This makes it
easier to handle errors (e.g, dirtying caps and updating the MDS
metadata if only some objects have been copied before an error has
occurred).
- Added calls to ceph_oloc_destroy() to avoid leaking memory with src_oloc
and dst_oloc
- After the object copy loop, the new file size to be reported to the MDS
(if there's file size change) is now the actual file size, and not the
size after an eventual extra manual copy.
- Added a few dout() to show the number of bytes copied in the two manual
copies and in the object copy loop.
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
On my machine (x86_64) this struct is 952 bytes, which gets rounded up
to 1024 by kmalloc. Move this to a dedicated slabcache, so we can
allocate them without the extra 72 bytes of overhead per.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Use the "page has been truncated" logic in page_mkwrite_check_truncate
instead of reimplementing it here. Other than with the existing code,
fail with -EFAULT / VM_FAULT_NOPAGE when page_offset(page) == size here
as well, as should be expected.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When a process exits, kernel closes its files. locks_remove_file()
is called to remove file locks on these files. locks_remove_file()
tries unlocking files even there is no file lock.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Since these helpers are only used by ceph.ko, move them there and
rename them with _sync_ qualifiers.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
CephFS doesn't set this bit to begin with, so there should be no need
to clear it.
Reported-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Although CEPH_DEFINE_SHOW_FUNC is much older, it now duplicates
DEFINE_SHOW_ATTRIBUTE from linux/seq_file.h.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
These bits will have new meaning for directory inodes.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In future patches we'll be taking and relying on Fx caps. Add proper
refcounting for them.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When the unsafe reply to a request comes in, the request is put on the
r_unsafe_dir inode's list. In future patches, we're going to need to
wait on requests that may not have gotten an unsafe reply yet.
Change __register_request to put the entry on the dir inode's list when
the pointer is set in the request, and don't check the
CEPH_MDS_R_GOT_UNSAFE flag when unregistering it.
The only place that uses this list today is fsync codepath, and with
the coming changes, we'll want to wait on all operations whether it has
gotten an unsafe reply or not.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
CEPH_OSDMAP_FULL/NEARFULL aren't set since mimic, so we need to consult
per-pool flags as well. Unfortunately the backwards compatibility here
is lacking:
- the change that deprecated OSDMAP_FULL/NEARFULL went into mimic, but
was guarded by require_osd_release >= RELEASE_LUMINOUS
- it was subsequently backported to luminous in v12.2.2, but that makes
no difference to clients that only check OSDMAP_FULL/NEARFULL because
require_osd_release is not client-facing -- it is for OSDs
Since all kernels are affected, the best we can do here is just start
checking both map flags and pool flags and send that to stable.
These checks are best effort, so take osdc->lock and look up pool flags
just once. Remove the FIXME, since filesystem quotas are checked above
and RADOS quotas are reflected in POOL_FLAG_FULL: when the pool reaches
its quota, both POOL_FLAG_FULL and POOL_FLAG_FULL_QUOTA are set.
Cc: stable@vger.kernel.org
Reported-by: Yanhu Cao <gmayyyha@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Sage Weil <sage@redhat.com>
For the old mount API, the module parameters parseing function will
be called in ceph_mount() and also just after the default posix acl
flag set, so we can control to enable/disable it via the mount option.
But for the new mount API, it will call the module parameters
parseing function before ceph_get_tree(), so the posix acl will always
be enabled.
Fixes: 82995cc6c5 ("libceph, rbd, ceph: convert to use the new mount API")
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
syzbot reported that 4fbc0c711b ("ceph: remove the extra slashes in
the server path") had caused a regression where an allocation could be
done under a spinlock -- compare_mount_options() is called by sget_fc()
with sb_lock held.
We don't really need the supplied server path, so canonicalize it
in place and compare it directly. To make this work, the leading
slash is kept around and the logic in ceph_real_mount() to skip it
is restored. CEPH_MSG_CLIENT_SESSION now reports the same (i.e.
canonicalized) path, with the leading slash of course.
Fixes: 4fbc0c711b ("ceph: remove the extra slashes in the server path")
Reported-by: syzbot+98704a51af8e3d9425a9@syzkaller.appspotmail.com
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
In O_APPEND & O_DIRECT mode, the data from different writers will
be possibly overlapping each other since they take the shared lock.
For example, both Writer1 and Writer2 are in O_APPEND and O_DIRECT
mode:
Writer1 Writer2
shared_lock() shared_lock()
getattr(CAP_SIZE) getattr(CAP_SIZE)
iocb->ki_pos = EOF iocb->ki_pos = EOF
write(data1)
write(data2)
shared_unlock() shared_unlock()
The data2 will overlap the data1 from the same file offset, the
old EOF.
Switch to exclusive lock instead when O_APPEND is specified.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Pull vfs file system parameter updates from Al Viro:
"Saner fs_parser.c guts and data structures. The system-wide registry
of syntax types (string/enum/int32/oct32/.../etc.) is gone and so is
the horror switch() in fs_parse() that would have to grow another case
every time something got added to that system-wide registry.
New syntax types can be added by filesystems easily now, and their
namespace is that of functions - not of system-wide enum members. IOW,
they can be shared or kept private and if some turn out to be widely
useful, we can make them common library helpers, etc., without having
to do anything whatsoever to fs_parse() itself.
And we already get that kind of requests - the thing that finally
pushed me into doing that was "oh, and let's add one for timeouts -
things like 15s or 2h". If some filesystem really wants that, let them
do it. Without somebody having to play gatekeeper for the variants
blessed by direct support in fs_parse(), TYVM.
Quite a bit of boilerplate is gone. And IMO the data structures make a
lot more sense now. -200LoC, while we are at it"
* 'merge.nfs-fs_parse.1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (25 commits)
tmpfs: switch to use of invalfc()
cgroup1: switch to use of errorfc() et.al.
procfs: switch to use of invalfc()
hugetlbfs: switch to use of invalfc()
cramfs: switch to use of errofc() et.al.
gfs2: switch to use of errorfc() et.al.
fuse: switch to use errorfc() et.al.
ceph: use errorfc() and friends instead of spelling the prefix out
prefix-handling analogues of errorf() and friends
turn fs_param_is_... into functions
fs_parse: handle optional arguments sanely
fs_parse: fold fs_parameter_desc/fs_parameter_spec
fs_parser: remove fs_parameter_description name field
add prefix to fs_context->log
ceph_parse_param(), ceph_parse_mon_ips(): switch to passing fc_log
new primitive: __fs_parse()
switch rbd and libceph to p_log-based primitives
struct p_log, variants of warnf() et.al. taking that one instead
teach logfc() to handle prefices, give it saner calling conventions
get rid of cg_invalf()
...
Don't bother with "mixed" options that would allow both the
form with and without argument (i.e. both -o foo and -o foo=bar).
Rather than trying to shove both into a single fs_parameter_spec,
allow having with-argument and no-argument specs with the same
name and teach fs_parse to handle that.
There are very few options of that sort, and they are actually
easier to handle that way - callers end up with less postprocessing.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Unused now.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... turning it into struct p_log embedded into fs_context. Initialize
the prefix with fs_type->name, turning fs_parse() into a trivial
inline wrapper for __fs_parse().
This makes fs_parameter_description->name completely unused.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... and now errorf() et.al. are never called with NULL fs_context,
so we can get rid of conditional in those.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Don't do a single array; attach them to fsparam_enum() entry
instead. And don't bother trying to embed the names into those -
it actually loses memory, with no real speedup worth mentioning.
Simplifies validation as well.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
- a set of patches that fixes various corner cases in mount and umount
code (Xiubo Li). This has to do with choosing an MDS, distinguishing
between laggy and down MDSes and parsing the server path.
- inode initialization fixes (Jeff Layton). The one included here
mostly concerns things like open_by_handle() and there is another
one that will come through Al.
- copy_file_range() now uses the new copy-from2 op (Luis Henriques).
The existing copy-from op turned out to be infeasible for generic
filesystem use; we disable the copy offload if OSDs don't support
copy-from2.
- a patch to link "rbd" and "block" devices together in sysfs (Hannes
Reinecke)
And a smattering of cleanups from Xiubo, Jeff and Chengguang.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl47PUcTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi6LoCACmVli5N6bgnBE4sTixi/jz6aCCbk32
ZPlKiSesHnOGkY6KXHJT58JYy0paITBRik5ypdz06J8aCOtWyPLbn3uCemF9CYn2
g6dId2Lf5vGFrgSm4YSiqp9a86IZmYSDG41LbJD/IJWFDWdMWqNPMDqji6yaIO5O
NJI5N0tk+VFXdV+JyjV9X/FnP1r1D2ReZzz21ZiqTJXSmE8YIkioLjkq36QTMMG7
Gm5qdlc1x2r4qfzA1g+OiWgRQCUMgkuYerFzus4mVbW4hrphsavH2DArbOwFmsXF
46hOq+1uGVVyZILLJfKNiktf1GExBF0icbSREJtmjUHbQvNR8BH0C+fV
=vvIc
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.6-rc1' of https://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
- a set of patches that fixes various corner cases in mount and umount
code (Xiubo Li). This has to do with choosing an MDS, distinguishing
between laggy and down MDSes and parsing the server path.
- inode initialization fixes (Jeff Layton). The one included here
mostly concerns things like open_by_handle() and there is another one
that will come through Al.
- copy_file_range() now uses the new copy-from2 op (Luis Henriques).
The existing copy-from op turned out to be infeasible for generic
filesystem use; we disable the copy offload if OSDs don't support
copy-from2.
- a patch to link "rbd" and "block" devices together in sysfs (Hannes
Reinecke)
... and a smattering of cleanups from Xiubo, Jeff and Chengguang.
* tag 'ceph-for-5.6-rc1' of https://github.com/ceph/ceph-client: (25 commits)
rbd: set the 'device' link in sysfs
ceph: move net/ceph/ceph_fs.c to fs/ceph/util.c
ceph: print name of xattr in __ceph_{get,set}xattr() douts
ceph: print r_direct_hash in hex in __choose_mds() dout
ceph: use copy-from2 op in copy_file_range
ceph: close holes in structs ceph_mds_session and ceph_mds_request
rbd: work around -Wuninitialized warning
ceph: allocate the correct amount of extra bytes for the session features
ceph: rename get_session and switch to use ceph_get_mds_session
ceph: remove the extra slashes in the server path
ceph: add possible_max_rank and make the code more readable
ceph: print dentry offset in hex and fix xattr_version type
ceph: only touch the caps which have the subset mask requested
ceph: don't clear I_NEW until inode metadata is fully populated
ceph: retry the same mds later after the new session is opened
ceph: check availability of mds cluster on mount after wait timeout
ceph: keep the session state until it is released
ceph: add __send_request helper
ceph: ensure we have a new cap before continuing in fill_inode
ceph: drop unused ttl_from parameter from fill_inode
...
All of these functions are only called from CephFS, so move them into
ceph.ko, and drop the exports.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
It's hard to read, especially when it is:
ceph: __choose_mds 00000000b7bc9c15 is_hash=1 (-271041095) mode 0
At the same time, switch to __func__ to get rid of the checkpatch
warning.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Instead of using the copy-from operation, switch copy_file_range to the
new copy-from2 operation, which allows to send the truncate_seq and
truncate_size parameters.
If an OSD does not support the copy-from2 operation it will return
-EOPNOTSUPP. In that case, the kernel client will stop trying to do
remote object copies for this fs client and will always use the generic
VFS copy_file_range.
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Move s_ref up to plug a 4 byte hole, which plugs another.
Move r_kref to shave 8 bytes off per request on x86_64.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The total bytes may potentially be larger than 8.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Just in case the session's refcount reach 0 and is releasing, and
if we get the session without checking it, we may encounter kernel
crash.
Rename get_session to ceph_get_mds_session and make it global.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
It's possible to pass the mount helper a server path that has more
than one contiguous slash character. For example:
$ mount -t ceph 192.168.195.165:40176:/// /mnt/cephfs/
In the MDS server side the extra slashes of the server path will be
treated as snap dir, and then we can get the following debug logs:
ceph: mount opening path //
ceph: open_root_inode opening '//'
ceph: fill_trace 0000000059b8a3bc is_dentry 0 is_target 1
ceph: alloc_inode 00000000dc4ca00b
ceph: get_inode created new inode 00000000dc4ca00b 1.ffffffffffffffff ino 1
ceph: get_inode on 1=1.ffffffffffffffff got 00000000dc4ca00b
And then when creating any new file or directory under the mount
point, we can hit the following BUG_ON in ceph_fill_trace():
BUG_ON(ceph_snap(dir) != dvino.snap);
Have the client ignore the extra slashes in the server path when
mounting. This will also canonicalize the path, so that identical mounts
can be consilidated.
1) "//mydir1///mydir//"
2) "/mydir1/mydir"
3) "/mydir1/mydir/"
Regardless of the internal treatment of these paths, the kernel still
stores the original string including the leading '/' for presentation
to userland.
URL: https://tracker.ceph.com/issues/42771
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The m_num_mds here is actually the number for MDSs which are in
up:active status, and it will be duplicated to m_num_active_mds,
so remove it.
Add possible_max_rank to the mdsmap struct and this will be
the correctly possible largest rank boundary.
Remove the special case for one mds in __mdsmap_get_random_mds(),
because the validate mds rank may not always be 0.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In the debug logs about the di->offset or ctx->pos it is in hex
format, but some others are using the dec format. It is a little
hard to read.
For the xattr version, it is u64 type, using a shorter type may
truncate it.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
For the caps having no any subset mask requested we shouldn't touch
them.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Currently, we could have an open-by-handle (or NFS server) call
into the filesystem and start working with an inode before it's
properly filled out.
Don't clear I_NEW until we have filled out the inode, and discard it
properly if that fails. Note that we occasionally take an extra
reference to the inode to ensure that we don't put the last reference in
discard_new_inode, but rather leave it for ceph_async_iput.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If max_mds > 1 and a request is submitted that chooses a random mds
rank, and the relating session is not opened yet, the request will wait
until the session has been opened and resend again.
Every time the request goes through __do_request, it will release the
req->session first and choose a random one again, which may be a
completely different rank than the one it just waited on.
In the worst case, it will open all the mds sessions one by one just
before the request can be successfully sent out.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If all the MDS daemons are down for some reason, then the first mount
attempt will fail with EIO after the mount request times out. A mount
attempt will also fail with EIO if all of the MDS's are laggy.
This patch changes the code to return -EHOSTUNREACH in these situations
and adds a pr_info error message to help the admin determine the cause.
URL: https://tracker.ceph.com/issues/4386
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When reconnecting the session but if it is denied by the MDS due
to client was in blacklist or something else, kclient will receive
a session close reply, and we will never see the important log:
"ceph: mds%d reconnect denied"
And with the confusing log:
"ceph: handle_session mds0 close 0000000085804730 state ??? seq 0"
Let's keep the session state until its memories is released.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If the caller passes in a NULL cap_reservation, and we can't allocate
one then ensure that we fail gracefully.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
During umount, if there has no any unsafe request in the mdsc and
some requests still in-flight and not got reply yet, and if the
rest requets are all safe ones, after that even all of them in mdsc
are unregistered, the umount must wait until after mount_timeout
seconds anyway.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Even the MDS is in up:active state, but it also maybe laggy. Here
will skip the laggy MDSs.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In case the max_mds > 1 in MDS cluster and there is no any standby
MDS and all the max_mds MDSs are in up:active state, if one of the
up:active MDSs is dead, the m->m_num_laggy in kclient will be 1.
Then the mount will fail without considering other healthy MDSs.
There manybe some MDSs still "in" the cluster but not in up:active
state, we will ignore them. Only when all the up:active MDSs in
the cluster are laggy will treat the cluster as not be available.
In case decreasing the max_mds, the cluster will not stop the extra
up:active MDSs immediately and there will be a latency. During it
the up:active MDS number will be larger than the max_mds, so later
the m_info memories will 100% be reallocated.
Here will pick out the up:active MDSs as the m_num_mds and allocate
the needed memories once.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
ceph_pagelist_encode_string() will not fail in reserved case,
also, we do not check err code here, so remove unnecessary
assignment.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
We print session's refcount in debug message inside
ceph_put_mds_session() and get_session(), so we don't have to
print it in con_get()/__ceph_lookup_mds_session()/con_put().
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Currently, we just assume that it will stick around by virtue of the
submitter's reference, but later patches will allow the syscall to
return early and we can't rely on that reference at that point.
While I'm not aware of any reports of it, Xiubo pointed out that this
may fix a use-after-free. If the wait for a reply times out or is
canceled via signal, and then the reply comes in after the syscall
returns, the client can end up trying to access r_parent without a
reference.
Take an extra reference to the inode when setting r_parent and release
it when releasing the request.
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Show the laggy state.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
__ceph_is_any_caps is a duplicate helper.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The nr in ceph_reclaim_caps_nr() is very possibly larger than 1,
so we may miss it and the reclaim work couldn't triggered as expected.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add some visibility of tasks that are waiting for caps to the "caps"
debugfs file. Display the tgid of the waiting task, inode number, and
the caps the task needs and wants.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Most of these values should never be negative, so convert them to
unsigned values. Add some sanity checking to the parsed values, and
clean up some unneeded casts.
Note that while caps_max should never be negative, this patch leaves
it signed, since this value ends up later being compared to a signed
counter. Just ensure that userland never passes in a negative value
for caps_max.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Since ceph always uses ns granularity, skip the
truncation which is a no-op.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: jlayton@kernel.org
Cc: ceph-devel@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
mappings are handled and a conversion to the new mount API (slightly
complicated by the fact that we had a common option parsing framework
that called out into rbd and the filesystem instead of them calling
into it). Also included a few scattered fixes and a MAINTAINERS update
for rbd, adding Dongsheng as a reviewer.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl3oDqwTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi8/OCACAhPEoSkG8J0XOgP0NlFQGRvikugKq
wlUfpNhkJOVmyM1t9LgiHHirTa7/kA76wPo/iHtnvjIZuZoaX3+NoZX5DwgKVCo1
SCQdXR4ohVPiYxUpK+z/fDXxpYHhaO2SAww+RRHSDxnlN5CHqFBcBhRBPfhraZT5
dwiQt7++UOnp/hfk1Dqg5EogmSdLxqWyjClKf2lliZkzbU9YXmGapqQsur6sBk+e
cLRmRBmMw4cDAKLL1taCympN0AxNMcePs1njvdwQ7XabNWrT061yFyt1ZNwAV/Nu
0nCyh/9IwQcsR0EvK7FCdUEJPy88Reufd+GleS4nkEZpbxQBzo0aGow0
=Egtk
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.5-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"The two highlights are a set of improvements to how rbd read-only
mappings are handled and a conversion to the new mount API (slightly
complicated by the fact that we had a common option parsing framework
that called out into rbd and the filesystem instead of them calling
into it).
Also included a few scattered fixes and a MAINTAINERS update for rbd,
adding Dongsheng as a reviewer"
* tag 'ceph-for-5.5-rc1' of git://github.com/ceph/ceph-client:
libceph, rbd, ceph: convert to use the new mount API
rbd: ask for a weaker incompat mask for read-only mappings
rbd: don't query snapshot features
rbd: remove snapshot existence validation code
rbd: don't establish watch for read-only mappings
rbd: don't acquire exclusive lock for read-only mappings
rbd: disallow read-write partitions on images mapped read-only
rbd: treat images mapped read-only seriously
rbd: introduce RBD_DEV_FLAG_READONLY
rbd: introduce rbd_is_snap()
ceph: don't leave ino field in ceph_mds_request_head uninitialized
ceph: tone down loglevel on ceph_mdsc_build_path warning
rbd: update MAINTAINERS info
ceph: fix geting random mds from mdsmap
rbd: fix spelling mistake "requeueing" -> "requeuing"
ceph: make several helper accessors take const pointers
libceph: drop unnecessary check from dispatch() in mon_client.c
As part of the cleanup of some remaining y2038 issues, I came to
fs/compat_ioctl.c, which still has a couple of commands that need support
for time64_t.
In completely unrelated work, I spent time on cleaning up parts of this
file in the past, moving things out into drivers instead.
After Al Viro reviewed an earlier version of this series and did a lot
more of that cleanup, I decided to try to completely eliminate the rest
of it and move it all into drivers.
This series incorporates some of Al's work and many patches of my own,
but in the end stops short of actually removing the last part, which is
the scsi ioctl handlers. I have patches for those as well, but they need
more testing or possibly a rewrite.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=lgCl
-----END PGP SIGNATURE-----
Merge tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground
Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann:
"As part of the cleanup of some remaining y2038 issues, I came to
fs/compat_ioctl.c, which still has a couple of commands that need
support for time64_t.
In completely unrelated work, I spent time on cleaning up parts of
this file in the past, moving things out into drivers instead.
After Al Viro reviewed an earlier version of this series and did a lot
more of that cleanup, I decided to try to completely eliminate the
rest of it and move it all into drivers.
This series incorporates some of Al's work and many patches of my own,
but in the end stops short of actually removing the last part, which
is the scsi ioctl handlers. I have patches for those as well, but they
need more testing or possibly a rewrite"
* tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits)
scsi: sd: enable compat ioctls for sed-opal
pktcdvd: add compat_ioctl handler
compat_ioctl: move SG_GET_REQUEST_TABLE handling
compat_ioctl: ppp: move simple commands into ppp_generic.c
compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t
compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic
compat_ioctl: unify copy-in of ppp filters
tty: handle compat PPP ioctls
compat_ioctl: move SIOCOUTQ out of compat_ioctl.c
compat_ioctl: handle SIOCOUTQNSD
af_unix: add compat_ioctl support
compat_ioctl: reimplement SG_IO handling
compat_ioctl: move WDIOC handling into wdt drivers
fs: compat_ioctl: move FITRIM emulation into file systems
gfs2: add compat_ioctl support
compat_ioctl: remove unused convert_in_user macro
compat_ioctl: remove last RAID handling code
compat_ioctl: remove /dev/raw ioctl translation
compat_ioctl: remove PCI ioctl translation
compat_ioctl: remove joystick ioctl translation
...
Convert the ceph filesystem to the new internal mount API as the old
one will be obsoleted and removed. This allows greater flexibility in
communication of mount parameters between userspace, the VFS and the
filesystem.
See Documentation/filesystems/mount_api.txt for more information.
[ Numerous string handling, leak and regression fixes; rbd conversion
was particularly broken and had to be redone almost from scratch. ]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
We currently just pass junk in this field unless we're retransmitting a
create, but in later patches, we'll need a mechanism to pass a delegated
inode number on an initial create request. Prepare for this by ensuring
this field is zeroed out.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When this occurs, it usually means that we raced with a rename, and
there is no need to warn in that case. Only printk if we pass the
rename sequence check but still ended up with pos < 0.
Either way, this doesn't warrant a KERN_ERR message. Change it to
KERN_WARNING.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
For example, if we have 5 mds in the mdsmap and the states are:
m_info[5] --> [-1, 1, -1, 1, 1]
If we get a random number 1, then we should get the mds index 3 as
expected, but actually we will get index 2, which the state is -1.
The issue is that the for loop increment will advance past any "up"
MDS that was found during the while loop search.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
None of these helper functions change anything in memory, so we can
declare their arguments as const.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Ceph can in some cases issue an async DIO request, in which case we can
end up calling ceph_end_io_direct before the I/O is actually complete.
That may allow buffered operations to proceed while DIO requests are
still in flight.
Fix this by incrementing the i_dio_count when issuing an async DIO
request, and decrement it when tearing down the aio_req.
Fixes: 321fe13c93 ("ceph: add buffered/direct exclusionary locking for reads and writes")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Most of the time, we (or the vfs layer) takes the inode_lock and then
acquires caps, but ceph_read_iter does the opposite, and that can lead
to a deadlock.
When there are multiple clients treading over the same data, we can end
up in a situation where a reader takes caps and then tries to acquire
the inode_lock. Another task holds the inode_lock and issues a request
to the MDS which needs to revoke the caps, but that can't happen until
the inode_lock is unwedged.
Fix this by having ceph_read_iter take the inode_lock earlier, before
attempting to acquire caps.
Fixes: 321fe13c93 ("ceph: add buffered/direct exclusionary locking for reads and writes")
Link: https://tracker.ceph.com/issues/36348
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If someone requests fscache on the mount, and the kernel doesn't
support it, it should fail the mount.
[ Drop ceph prefix -- it's provided by pr_err. ]
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
copy_file_range tries to use the OSD 'copy-from' operation, which simply
performs a full object copy. Unfortunately, the implementation of this
system call assumes that stripe_count is always set to 1 and doesn't take
into account that the data may be striped across an object set. If the
file layout has stripe_count different from 1, then the destination file
data will be corrupted.
For example:
Consider a 8 MiB file with 4 MiB object size, stripe_count of 2 and
stripe_size of 2 MiB; the first half of the file will be filled with 'A's
and the second half will be filled with 'B's:
0 4M 8M Obj1 Obj2
+------+------+ +----+ +----+
file: | AAAA | BBBB | | AA | | AA |
+------+------+ |----| |----|
| BB | | BB |
+----+ +----+
If we copy_file_range this file into a new file (which needs to have the
same file layout!), then it will start by copying the object starting at
file offset 0 (Obj1). And then it will copy the object starting at file
offset 4M -- which is Obj1 again.
Unfortunately, the solution for this is to not allow remote object copies
to be performed when the file layout stripe_count is not 1 and simply
fallback to the default (VFS) copy_file_range implementation.
Cc: stable@vger.kernel.org
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If ceph_atomic_open is handed a !d_in_lookup dentry, then that means
that it already passed d_revalidate so we *know* that it's negative (or
at least was very recently). Just return -ENOENT in that case.
This also addresses a subtle bug in dentry handling. Non-O_CREAT opens
call atomic_open with the parent's i_rwsem shared, but calling
d_splice_alias on a hashed dentry requires the exclusive lock.
If ceph_atomic_open receives a hashed, negative dentry on a non-O_CREAT
open, and another client were to race in and create the file before we
issue our OPEN, ceph_fill_trace could end up calling d_splice_alias on
the dentry with the new inode with insufficient locks.
Cc: stable@vger.kernel.org
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
We should not play with dcache without parent locked...
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
For RCU case ->d_revalidate() is called with rcu_read_lock() and
without pinning the dentry passed to it. Which means that it
can't rely upon ->d_inode remaining stable; that's the reason
for d_inode_rcu(), actually.
Make sure we don't reload ->d_inode there.
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
KASAN reports a use-after-free when running xfstest generic/531, with the
following trace:
[ 293.903362] kasan_report+0xe/0x20
[ 293.903365] rb_erase+0x1f/0x790
[ 293.903370] __ceph_remove_cap+0x201/0x370
[ 293.903375] __ceph_remove_caps+0x4b/0x70
[ 293.903380] ceph_evict_inode+0x4e/0x360
[ 293.903386] evict+0x169/0x290
[ 293.903390] __dentry_kill+0x16f/0x250
[ 293.903394] dput+0x1c6/0x440
[ 293.903398] __fput+0x184/0x330
[ 293.903404] task_work_run+0xb9/0xe0
[ 293.903410] exit_to_usermode_loop+0xd3/0xe0
[ 293.903413] do_syscall_64+0x1a0/0x1c0
[ 293.903417] entry_SYSCALL_64_after_hwframe+0x44/0xa9
This happens because __ceph_remove_cap() may queue a cap release
(__ceph_queue_cap_release) which can be scheduled before that cap is
removed from the inode list with
rb_erase(&cap->ci_node, &ci->i_caps);
And, when this finally happens, the use-after-free will occur.
This can be fixed by removing the cap from the inode list before being
removed from the session list, and thus eliminating the risk of an UAF.
Cc: stable@vger.kernel.org
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The ceph_ioctl function is used both for files and directories, but only
the files support doing that in 32-bit compat mode.
On the s390 architecture, there is also a problem with invalid 31-bit
pointers that need to be passed through compat_ptr().
Use the new compat_ptr_ioctl() to address both issues.
Note: When backporting this patch to stable kernels, "compat_ioctl:
add compat_ptr_ioctl()" is needed as well.
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In the future, we're going to want to extend the ceph_reply_info_extra
for create replies. Currently though, the kernel code doesn't accept an
extra blob that is larger than the expected data.
Change the code to skip over any unrecognized fields at the end of the
extra blob, rather than returning -EIO.
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
- automatic recovery of a blacklisted filesystem session (Zheng Yan).
This is disabled by default and can be enabled by mounting with the
new "recover_session=clean" option.
- serialize buffered reads and O_DIRECT writes (Jeff Layton). Care is
taken to avoid serializing O_DIRECT reads and writes with each other,
this is based on the exclusion scheme from NFS.
- handle large osdmaps better in the face of fragmented memory (myself)
- don't limit what security.* xattrs can be get or set (Jeff Layton).
We were overly restrictive here, unnecessarily preventing things like
file capability sets stored in security.capability from working.
- allow copy_file_range() within the same inode and across different
filesystems within the same cluster (Luis Henriques)
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl2LoD8THGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzixRYB/9H5S4fif8Pn9eiXkIJiT9UZR/o7S1k
ikfQNPeDxlBLKnoZXpDp2HqCu1/YuCcJ0zpZzPGGrKECZb7r+NaayxhmEXAZ+Vsg
YwsO3eNHBbb58pe9T4oiHp19sflwcTOeNwg8wlvmvrgfBupFz2pU8Xm72EdFyoYm
tP0QNTOCAuQK3pJcgozaptAO1TzBL3LomyVM0YzAKcumgMg47zALpaSLWJLGtDLM
5+5WLvcVfBGLVv60h4B62ldS39eBxqTsFodcRMUaqAsnhLK70HVfKlwR3GgtZggr
PDqbsuIfw/O3b65U2XDKZt1P9dyG3OE/ucueduXUxJPYNGmooEE+PpE+
=DRVP
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.4-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"The highlights are:
- automatic recovery of a blacklisted filesystem session (Zheng Yan).
This is disabled by default and can be enabled by mounting with the
new "recover_session=clean" option.
- serialize buffered reads and O_DIRECT writes (Jeff Layton). Care is
taken to avoid serializing O_DIRECT reads and writes with each
other, this is based on the exclusion scheme from NFS.
- handle large osdmaps better in the face of fragmented memory
(myself)
- don't limit what security.* xattrs can be get or set (Jeff Layton).
We were overly restrictive here, unnecessarily preventing things
like file capability sets stored in security.capability from
working.
- allow copy_file_range() within the same inode and across different
filesystems within the same cluster (Luis Henriques)"
* tag 'ceph-for-5.4-rc1' of git://github.com/ceph/ceph-client: (41 commits)
ceph: call ceph_mdsc_destroy from destroy_fs_client
libceph: use ceph_kvmalloc() for osdmap arrays
libceph: avoid a __vmalloc() deadlock in ceph_kvmalloc()
ceph: allow object copies across different filesystems in the same cluster
ceph: include ceph_debug.h in cache.c
ceph: move static keyword to the front of declarations
rbd: pull rbd_img_request_create() dout out into the callers
ceph: reconnect connection if session hang in opening state
libceph: drop unused con parameter of calc_target()
ceph: use release_pages() directly
rbd: fix response length parameter for encoded strings
ceph: allow arbitrary security.* xattrs
ceph: only set CEPH_I_SEC_INITED if we got a MAC label
ceph: turn ceph_security_invalidate_secctx into static inline
ceph: add buffered/direct exclusionary locking for reads and writes
libceph: handle OSD op ceph_pagelist_append() errors
ceph: don't return a value from void function
ceph: don't freeze during write page faults
ceph: update the mtime when truncating up
ceph: fix indentation in __get_snap_name()
...
OSDs are able to perform object copies across different pools. Thus,
there's no need to prevent copy_file_range from doing remote copies if the
source and destination superblocks are different. Only return -EXDEV if
they have different fsid (the cluster ID).
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Move the static keyword to the front of declarations of
snap_handle_length, handle_length and connected_handle_length,
and resolve the following compiler warnings that can be seen
when building with warnings enabled (W=1):
fs/ceph/export.c:38:2: warning:
‘static’ is not at beginning of declaration [-Wold-style-declaration]
fs/ceph/export.c:88:2: warning:
‘static’ is not at beginning of declaration [-Wold-style-declaration]
fs/ceph/export.c:90:2: warning:
‘static’ is not at beginning of declaration [-Wold-style-declaration]
Signed-off-by: Krzysztof Wilczynski <kw@linux.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If client mds session is evicted in CEPH_MDS_SESSION_OPENING state,
mds won't send session msg to client, and delayed_work skip
CEPH_MDS_SESSION_OPENING state session, the session hang forever.
Allow ceph_con_keepalive to reconnect a session in OPENING to avoid
session hang. Also, ensure that we skip sessions in RESTARTING and
REJECTED states since those states can't be resurrected by issuing
a keepalive.
Link: https://tracker.ceph.com/issues/41551
Signed-off-by: Erqi Chen chenerqi@gmail.com
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
release_pages() has been available to modules since Oct, 2010,
when commit 0be8557bcd ("fuse: use release_pages()") added
EXPORT_SYMBOL(release_pages). However, this ceph code was still
using a workaround.
Remove the workaround, and call release_pages() directly.
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Most filesystems don't limit what security.* xattrs can be set or
fetched. I see no reason that we need to limit that on cephfs either.
Drop the special xattr handler for "security." xattrs, and allow the
"other" xattr handler to handle security xattrs as well.
In addition to fixing xfstest generic/093, this allows us to support
per-file capabilities (a'la setcap(8)).
Link: https://tracker.ceph.com/issues/41135
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
__ceph_getxattr will set the CEPH_I_SEC_INITED flag whenever it gets
any xattr that starts with "security.". We only want to set that flag
when fetching the MAC label for the currently-active LSM, however.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
No need to do an extra jump here. Also add some comments on the endifs.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
xfstest generic/451 intermittently fails. The test does O_DIRECT writes
to a file, and then reads back the result using buffered I/O, while
running a separate set of tasks that are also doing buffered reads.
The client will invalidate the cache prior to a direct write, but it's
easy for one of the other readers' replies to race in and reinstantiate
the invalidated range with stale data.
To fix this, we must to serialize direct I/O writes and buffered reads.
We could just sprinkle in some shared locks on the i_rwsem for reads,
and increase the exclusive footprint on the write side, but that would
cause O_DIRECT writes to end up serialized vs. other direct requests.
Instead, borrow the scheme used by nfs.ko. Buffered writes take the
i_rwsem exclusively, but buffered reads take a shared lock, allowing
them to run in parallel.
O_DIRECT requests also take a shared lock, but we need for them to not
run in parallel with buffered reads. A flag on the ceph_inode_info is
used to indicate whether it's in direct or buffered I/O mode. When a
conflicting request is submitted, it will block until the inode can be
flipped to the necessary mode.
Link: https://tracker.ceph.com/issues/40985
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This fixes a build warning to that effect.
Fixes: 1a829ff2a6 ("ceph: no need to check return value of debugfs_create functions")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Prevent freezing operations during write page faults. This is good
practice for most filesystems, but especially for ceph since we're
monkeying with the signal table here.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If we have Fx caps, and the we're truncating the size to be larger, then
we'll cache the size attribute change, but the mtime won't be updated.
Move the size handling before the mtime, and add ATTR_MTIME to ia_valid
in that case to make sure the mtime also gets updated.
This fixes xfstest generic/313.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
It doesn't do anything to invalidate the cache when dropping RD caps.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
cap->session is always non-NULL, so we can just do a single test for
equality w/o testing explicitly for a NULL pointer.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Currently, this function returns ci->i_dirty_caps, but the callers have
to check that that isn't 0 before calling this function. Have the
callers grab that value directly out of the inode, and have
__mark_caps_flushing return the flush_tid instead.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
We actually need the ci->i_ceph_lock here. The necessity of the s_mutex
is less clear. Also add a lockdep assertion for the i_ceph_lock.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
It's only used to keep count of caps being trimmed, but that requires
that we hold the session->s_mutex to prevent multiple trimming
operations from running concurrently.
We can achieve the same effect using an integer on the stack, which
allows us to (eventually) not need the s_mutex.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
It's protected by the s_gen_ttl_lock, so we should fetch under it
and ensure that we're using the same generation in both places.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
We already mark the mapping in that case, and doing this can cause
false positives to occur at fsync time, as well as spurious read
errors.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Make client use osd reply and session message to infer if itself is
blacklisted. Client reconnect to cluster using new entity addr if it
is blacklisted. Auto reconnect is limited to once every 30 minutes.
Auto reconnect is disabled by default. It can be enabled/disabled by
recover_session=<no|clean> mount option. In 'clean' mode, client drops
any dirty data/metadata, invalidates page caches and invalidates all
writable file handles. After reconnect, file locks become stale because
MDS loses track of them. If an inode contains any stale file locks,
read/write on the indoe are not allowed until applications release all
stale file locks.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
After mds evicts session, file locks get lost sliently. It's not safe to
let programs continue to do read/write.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
It closes mds sessions, drop all caps and invalidates page caches,
then use new entity address to reconnect to the cluster.
After reconnect, all dirty data/metadata are dropped, file locks
get lost sliently. Open files continue to work because client will
try renewing caps on later read/write.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Also change several other functions' arguments, no logical changes.
This is preparetion for later patch that checks filp error.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Use errseq_t to track and report errors of async metadata operations,
similar to how kernel handles errors during writeback.
If any dirty caps or any unsafe request gets dropped during session
eviction, record -EIO in corresponding inode's i_meta_err. The error
will be reported by subsequent fsync,
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
CEPH_MDS_SESSION_{RESTARTING,RECONNECTING} are for for mds failover,
they are sub-states of CEPH_MDS_SESSION_OPEN. So __close_session()
should send close request for session in these two state.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Most filesystems that provide virtual xattrs (e.g. CIFS) don't display
them via listxattr(). Ceph does, and that causes some of the tests in
xfstests to fail.
Have cephfs stop listing vxattrs in listxattr. Userspace can always
query them directly when the name is known.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
There is no reason to prevent this. The OSD should be able to handle
this as long as the objects are different, and the existing code falls
back when the offset into the object is different.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Luis Henriques <lhenriques@suse.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When filling an inode with info from the MDS, i_blkbits is being
initialized using fl_stripe_unit, which contains the stripe unit in
bytes. Unfortunately, this doesn't make sense for directories as they
have fl_stripe_unit set to '0'. This means that i_blkbits will be set
to 0xff, causing an UBSAN undefined behaviour in i_blocksize():
UBSAN: Undefined behaviour in ./include/linux/fs.h:731:12
shift exponent 255 is too large for 32-bit type 'int'
Fix this by initializing i_blkbits to CEPH_BLOCK_SHIFT if fl_stripe_unit
is zero.
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Fill in the appropriate limits to avoid inconsistencies
in the vfs cached inode times when timestamps are
outside the permitted range.
According to the disscussion in
https://patchwork.kernel.org/patch/8308691/ we agreed to use
unsigned 32 bit timestamps on ceph.
Update the limits accordingly.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Cc: zyan@redhat.com
Cc: sage@redhat.com
Cc: idryomov@gmail.com
Cc: ceph-devel@vger.kernel.org
When ceph_mdsc_do_request returns an error, we can't assume that the
filelock_reply pointer will be set. Only try to fetch fields out of
the r_reply_info when it returns success.
Cc: stable@vger.kernel.org
Reported-by: Hector Martin <hector@marcansoft.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
clear_page_dirty_for_io(page) before mapping->a_ops->invalidatepage().
invalidatepage() clears page's private flag, if dirty flag is not
cleared, the page may cause BUG_ON failure in ceph_set_page_dirty().
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/40862
Signed-off-by: Erqi Chen <chenerqi@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Calling ceph_buffer_put() in fill_inode() may result in freeing the
i_xattrs.blob buffer while holding the i_ceph_lock. This can be fixed by
postponing the call until later, when the lock is released.
The following backtrace was triggered by fstests generic/070.
BUG: sleeping function called from invalid context at mm/vmalloc.c:2283
in_atomic(): 1, irqs_disabled(): 0, pid: 3852, name: kworker/0:4
6 locks held by kworker/0:4/3852:
#0: 000000004270f6bb ((wq_completion)ceph-msgr){+.+.}, at: process_one_work+0x1b8/0x5f0
#1: 00000000eb420803 ((work_completion)(&(&con->work)->work)){+.+.}, at: process_one_work+0x1b8/0x5f0
#2: 00000000be1c53a4 (&s->s_mutex){+.+.}, at: dispatch+0x288/0x1476
#3: 00000000559cb958 (&mdsc->snap_rwsem){++++}, at: dispatch+0x2eb/0x1476
#4: 000000000d5ebbae (&req->r_fill_mutex){+.+.}, at: dispatch+0x2fc/0x1476
#5: 00000000a83d0514 (&(&ci->i_ceph_lock)->rlock){+.+.}, at: fill_inode.isra.0+0xf8/0xf70
CPU: 0 PID: 3852 Comm: kworker/0:4 Not tainted 5.2.0+ #441
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-prebuilt.qemu.org 04/01/2014
Workqueue: ceph-msgr ceph_con_workfn
Call Trace:
dump_stack+0x67/0x90
___might_sleep.cold+0x9f/0xb1
vfree+0x4b/0x60
ceph_buffer_release+0x1b/0x60
fill_inode.isra.0+0xa9b/0xf70
ceph_fill_trace+0x13b/0xc70
? dispatch+0x2eb/0x1476
dispatch+0x320/0x1476
? __mutex_unlock_slowpath+0x4d/0x2a0
ceph_con_workfn+0xc97/0x2ec0
? process_one_work+0x1b8/0x5f0
process_one_work+0x244/0x5f0
worker_thread+0x4d/0x3e0
kthread+0x105/0x140
? process_one_work+0x5f0/0x5f0
? kthread_park+0x90/0x90
ret_from_fork+0x3a/0x50
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Calling ceph_buffer_put() in __ceph_build_xattrs_blob() may result in
freeing the i_xattrs.blob buffer while holding the i_ceph_lock. This can
be fixed by having this function returning the old blob buffer and have
the callers of this function freeing it when the lock is released.
The following backtrace was triggered by fstests generic/117.
BUG: sleeping function called from invalid context at mm/vmalloc.c:2283
in_atomic(): 1, irqs_disabled(): 0, pid: 649, name: fsstress
4 locks held by fsstress/649:
#0: 00000000a7478e7e (&type->s_umount_key#19){++++}, at: iterate_supers+0x77/0xf0
#1: 00000000f8de1423 (&(&ci->i_ceph_lock)->rlock){+.+.}, at: ceph_check_caps+0x7b/0xc60
#2: 00000000562f2b27 (&s->s_mutex){+.+.}, at: ceph_check_caps+0x3bd/0xc60
#3: 00000000f83ce16a (&mdsc->snap_rwsem){++++}, at: ceph_check_caps+0x3ed/0xc60
CPU: 1 PID: 649 Comm: fsstress Not tainted 5.2.0+ #439
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-prebuilt.qemu.org 04/01/2014
Call Trace:
dump_stack+0x67/0x90
___might_sleep.cold+0x9f/0xb1
vfree+0x4b/0x60
ceph_buffer_release+0x1b/0x60
__ceph_build_xattrs_blob+0x12b/0x170
__send_cap+0x302/0x540
? __lock_acquire+0x23c/0x1e40
? __mark_caps_flushing+0x15c/0x280
? _raw_spin_unlock+0x24/0x30
ceph_check_caps+0x5f0/0xc60
ceph_flush_dirty_caps+0x7c/0x150
? __ia32_sys_fdatasync+0x20/0x20
ceph_sync_fs+0x5a/0x130
iterate_supers+0x8f/0xf0
ksys_sync+0x4f/0xb0
__ia32_sys_sync+0xa/0x10
do_syscall_64+0x50/0x1c0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7fc6409ab617
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Calling ceph_buffer_put() in __ceph_setxattr() may end up freeing the
i_xattrs.prealloc_blob buffer while holding the i_ceph_lock. This can be
fixed by postponing the call until later, when the lock is released.
The following backtrace was triggered by fstests generic/117.
BUG: sleeping function called from invalid context at mm/vmalloc.c:2283
in_atomic(): 1, irqs_disabled(): 0, pid: 650, name: fsstress
3 locks held by fsstress/650:
#0: 00000000870a0fe8 (sb_writers#8){.+.+}, at: mnt_want_write+0x20/0x50
#1: 00000000ba0c4c74 (&type->i_mutex_dir_key#6){++++}, at: vfs_setxattr+0x55/0xa0
#2: 000000008dfbb3f2 (&(&ci->i_ceph_lock)->rlock){+.+.}, at: __ceph_setxattr+0x297/0x810
CPU: 1 PID: 650 Comm: fsstress Not tainted 5.2.0+ #437
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-prebuilt.qemu.org 04/01/2014
Call Trace:
dump_stack+0x67/0x90
___might_sleep.cold+0x9f/0xb1
vfree+0x4b/0x60
ceph_buffer_release+0x1b/0x60
__ceph_setxattr+0x2b4/0x810
__vfs_setxattr+0x66/0x80
__vfs_setxattr_noperm+0x59/0xf0
vfs_setxattr+0x81/0xa0
setxattr+0x115/0x230
? filename_lookup+0xc9/0x140
? rcu_read_lock_sched_held+0x74/0x80
? rcu_sync_lockdep_assert+0x2e/0x60
? __sb_start_write+0x142/0x1a0
? mnt_want_write+0x20/0x50
path_setxattr+0xba/0xd0
__x64_sys_lsetxattr+0x24/0x30
do_syscall_64+0x50/0x1c0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7ff23514359a
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Pull dcache and mountpoint updates from Al Viro:
"Saner handling of refcounts to mountpoints.
Transfer the counting reference from struct mount ->mnt_mountpoint
over to struct mountpoint ->m_dentry. That allows us to get rid of the
convoluted games with ordering of mount shutdowns.
The cost is in teaching shrink_dcache_{parent,for_umount} to cope with
mixed-filesystem shrink lists, which we'll also need for the Slab
Movable Objects patchset"
* 'work.dcache2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
switch the remnants of releasing the mountpoint away from fs_pin
get rid of detach_mnt()
make struct mountpoint bear the dentry reference to mountpoint, not struct mount
Teach shrink_dcache_parent() to cope with mixed-filesystem shrink lists
fs/namespace.c: shift put_mountpoint() to callers of unhash_mnt()
__detach_mounts(): lookup_mountpoint() can't return ERR_PTR() anymore
nfs: dget_parent() never returns NULL
ceph: don't open-code the check for dead lockref
- support for rbd object-map and fast-diff features (myself). This
will speed up reads, discards and things like snap diffs on sparse
images.
- ceph.snap.btime vxattr to expose snapshot creation time (David
Disseldorp). This will be used to integrate with "Restore Previous
Versions" feature added in Windows 7 for folks who reexport ceph
through SMB.
- security xattrs for ceph (Zheng Yan). Only selinux is supported
for now due to the limitations of ->dentry_init_security().
- support for MSG_ADDR2, FS_BTIME and FS_CHANGE_ATTR features (Jeff
Layton). This is actually a single feature bit which was missing
because of the filesystem pieces. With this in, the kernel client
will finally be reported as "luminous" by "ceph features" -- it is
still being reported as "jewel" even though all required Luminous
features were implemented in 4.13.
- stop NULL-terminating ceph vxattrs (Jeff Layton). The convention
with xattrs is to not terminate and this was causing inconsistencies
with ceph-fuse.
- change filesystem time granularity from 1 us to 1 ns, again fixing
an inconsistency with ceph-fuse (Luis Henriques).
On top of this there are some additional dentry name handling and cap
flushing fixes from Zheng. Finally, Jeff is formally taking over for
Zheng as the filesystem maintainer.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl0u+X8THGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi9byB/9fIxzoxtDMvixtJabuGSJRtlijDlWF
GlO6yIWCXl/8v8easR2PCF75U/xv0+QFQmze8PVi8u4Xz589P247NnEuyEZ9n84i
aCavARho6QLZPEL+B04NaqoHBl+ORKQTA6eKGhyKwRp/rn83z5Ubuw2tN7krHT3b
kCY61FuTQGxNY2o/WKv/iLwINYr7H23hCf0WwyyKH1bp7OegiQ14Ebn1NtfS3sMx
hS6h8Ya826vmUW0bCSS/9kzKYBCjksTig0HphUOHq6BoZJs++0b7GukIulRyuLfD
J9Gr9HGPoDCVzdmFfpn2FSlxdmqfO9amUSagd0ftLQfFlPlrpoULi0GW
=Bgxr
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.3-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"Lots of exciting things this time!
- support for rbd object-map and fast-diff features (myself). This
will speed up reads, discards and things like snap diffs on sparse
images.
- ceph.snap.btime vxattr to expose snapshot creation time (David
Disseldorp). This will be used to integrate with "Restore Previous
Versions" feature added in Windows 7 for folks who reexport ceph
through SMB.
- security xattrs for ceph (Zheng Yan). Only selinux is supported for
now due to the limitations of ->dentry_init_security().
- support for MSG_ADDR2, FS_BTIME and FS_CHANGE_ATTR features (Jeff
Layton). This is actually a single feature bit which was missing
because of the filesystem pieces. With this in, the kernel client
will finally be reported as "luminous" by "ceph features" -- it is
still being reported as "jewel" even though all required Luminous
features were implemented in 4.13.
- stop NULL-terminating ceph vxattrs (Jeff Layton). The convention
with xattrs is to not terminate and this was causing
inconsistencies with ceph-fuse.
- change filesystem time granularity from 1 us to 1 ns, again fixing
an inconsistency with ceph-fuse (Luis Henriques).
On top of this there are some additional dentry name handling and cap
flushing fixes from Zheng. Finally, Jeff is formally taking over for
Zheng as the filesystem maintainer"
* tag 'ceph-for-5.3-rc1' of git://github.com/ceph/ceph-client: (71 commits)
ceph: fix end offset in truncate_inode_pages_range call
ceph: use generic_delete_inode() for ->drop_inode
ceph: use ceph_evict_inode to cleanup inode's resource
ceph: initialize superblock s_time_gran to 1
MAINTAINERS: take over for Zheng as CephFS kernel client maintainer
rbd: setallochint only if object doesn't exist
rbd: support for object-map and fast-diff
rbd: call rbd_dev_mapping_set() from rbd_dev_image_probe()
libceph: export osd_req_op_data() macro
libceph: change ceph_osdc_call() to take page vector for response
libceph: bump CEPH_MSG_MAX_DATA_LEN (again)
rbd: new exclusive lock wait/wake code
rbd: quiescing lock should wait for image requests
rbd: lock should be quiesced on reacquire
rbd: introduce copyup state machine
rbd: rename rbd_obj_setup_*() to rbd_obj_init_*()
rbd: move OSD request allocation into object request state machines
rbd: factor out __rbd_osd_setup_discard_ops()
rbd: factor out rbd_osd_setup_copyup()
rbd: introduce obj_req->osd_reqs list
...
Here is the "big" driver core and debugfs changes for 5.3-rc1
It's a lot of different patches, all across the tree due to some api
changes and lots of debugfs cleanups. Because of this, there is going
to be some merge issues with your tree at the moment, I'll follow up
with the expected resolutions to make it easier for you.
Other than the debugfs cleanups, in this set of changes we have:
- bus iteration function cleanups (will cause build warnings
with s390 and coresight drivers in your tree)
- scripts/get_abi.pl tool to display and parse Documentation/ABI
entries in a simple way
- cleanups to Documenatation/ABI/ entries to make them parse
easier due to typos and other minor things
- default_attrs use for some ktype users
- driver model documentation file conversions to .rst
- compressed firmware file loading
- deferred probe fixes
All of these have been in linux-next for a while, with a bunch of merge
issues that Stephen has been patient with me for. Other than the merge
issues, functionality is working properly in linux-next :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXSgpnQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykcwgCfS30OR4JmwZydWGJ7zK/cHqk+KjsAnjOxjC1K
LpRyb3zX29oChFaZkc5a
=XrEZ
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the "big" driver core and debugfs changes for 5.3-rc1
It's a lot of different patches, all across the tree due to some api
changes and lots of debugfs cleanups.
Other than the debugfs cleanups, in this set of changes we have:
- bus iteration function cleanups
- scripts/get_abi.pl tool to display and parse Documentation/ABI
entries in a simple way
- cleanups to Documenatation/ABI/ entries to make them parse easier
due to typos and other minor things
- default_attrs use for some ktype users
- driver model documentation file conversions to .rst
- compressed firmware file loading
- deferred probe fixes
All of these have been in linux-next for a while, with a bunch of
merge issues that Stephen has been patient with me for"
* tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits)
debugfs: make error message a bit more verbose
orangefs: fix build warning from debugfs cleanup patch
ubifs: fix build warning after debugfs cleanup patch
driver: core: Allow subsystems to continue deferring probe
drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT
arch_topology: Remove error messages on out-of-memory conditions
lib: notifier-error-inject: no need to check return value of debugfs_create functions
swiotlb: no need to check return value of debugfs_create functions
ceph: no need to check return value of debugfs_create functions
sunrpc: no need to check return value of debugfs_create functions
ubifs: no need to check return value of debugfs_create functions
orangefs: no need to check return value of debugfs_create functions
nfsd: no need to check return value of debugfs_create functions
lib: 842: no need to check return value of debugfs_create functions
debugfs: provide pr_fmt() macro
debugfs: log errors when something goes wrong
drivers: s390/cio: Fix compilation warning about const qualifiers
drivers: Add generic helper to match by of_node
driver_find_device: Unify the match function with class_find_device()
bus_find_device: Unify the match callback with class_find_device
...
- Create a generic copy_file_range handler and make individual
filesystems responsible for calling it (i.e. no more assuming that
do_splice_direct will work or is appropriate)
- Refactor copy_file_range and remap_range parameter checking where they
are the same
- Install missing copy_file_range parameter checking(!)
- Remove suid/sgid and update mtime like any other file write
- Change the behavior so that a copy range crossing the source file's
eof will result in a short copy to the source file's eof instead of
EINVAL
- Permit filesystems to decide if they want to handle cross-superblock
copy_file_range in their local handlers.
-----BEGIN PGP SIGNATURE-----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=qM44
-----END PGP SIGNATURE-----
Merge tag 'copy-file-range-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull copy_file_range updates from Darrick Wong:
"This fixes numerous parameter checking problems and inconsistent
behaviors in the new(ish) copy_file_range system call.
Now the system call will actually check its range parameters
correctly; refuse to copy into files for which the caller does not
have sufficient privileges; update mtime and strip setuid like file
writes are supposed to do; and allows copying up to the EOF of the
source file instead of failing the call like we used to.
Summary:
- Create a generic copy_file_range handler and make individual
filesystems responsible for calling it (i.e. no more assuming that
do_splice_direct will work or is appropriate)
- Refactor copy_file_range and remap_range parameter checking where
they are the same
- Install missing copy_file_range parameter checking(!)
- Remove suid/sgid and update mtime like any other file write
- Change the behavior so that a copy range crossing the source file's
eof will result in a short copy to the source file's eof instead of
EINVAL
- Permit filesystems to decide if they want to handle
cross-superblock copy_file_range in their local handlers"
* tag 'copy-file-range-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
fuse: copy_file_range needs to strip setuid bits and update timestamps
vfs: allow copy_file_range to copy across devices
xfs: use file_modified() helper
vfs: introduce file_modified() helper
vfs: add missing checks to copy_file_range
vfs: remove redundant checks from generic_remap_checks()
vfs: introduce generic_file_rw_checks()
vfs: no fallback for ->copy_file_range
vfs: introduce generic_copy_file_range()
Commit e450f4d1a5 ("ceph: pass inclusive lend parameter to
filemap_write_and_wait_range()") fixed the end offset parameter used to
call filemap_write_and_wait_range and invalidate_inode_pages2_range.
Unfortunately it missed truncate_inode_pages_range, introducing a
regression that is easily detected by xfstest generic/130.
The problem is that when doing direct IO it is possible that an extra page
is truncated from the page cache when the end offset is page aligned.
This can cause data loss if that page hasn't been sync'ed to the OSDs.
While there, change code to use PAGE_ALIGN macro instead.
Cc: stable@vger.kernel.org
Fixes: e450f4d1a5 ("ceph: pass inclusive lend parameter to filemap_write_and_wait_range()")
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
ceph_drop_inode() implementation is not any different from the generic
function, thus there's no point in keeping it around.
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
remove_session_caps() relies on __wait_on_freeing_inode(), to wait for
freeing inode to remove its caps. But VFS wakes freeing inode waiters
before calling destroy_inode().
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/40102
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Having granularity set to 1us results in having inode timestamps with a
accurancy different from the fuse client (i.e. atime, ctime and mtime will
always end with '000'). This patch normalizes this behaviour and sets the
granularity to 1.
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Sage Weil <sage@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This list item remained from when we had safe and unsafe replies
(commit vs ack). It has since become a private list item for use by
clients.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The convention with xattrs is to not store the termination with string
data, given that it returns the length. This is how setfattr/getfattr
operate.
Most of ceph's virtual xattr routines use snprintf to plop the string
directly into the destination buffer, but snprintf always NULL
terminates the string. This means that if we send the kernel a buffer
that is the exact length needed to hold the string, it'll end up
truncated.
Add a ceph_fmt_xattr helper function to format the string into an
on-stack buffer that should always be large enough to hold the whole
thing and then memcpy the result into the destination buffer. If it does
turn out that the formatted string won't fit in the on-stack buffer,
then return -E2BIG and do a WARN_ONCE().
Change over most of the virtual xattr routines to use the new helper. A
couple of the xattrs are sourced from strings however, and it's
difficult to know how long they'll be. Just have those memcpy the result
in place after verifying the length.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Acked-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The getxattr manpage states that we should return ERANGE if the
destination buffer size is too small to hold the value.
ceph_vxattrcb_layout does this internally, but we should be doing
this for all vxattrs.
Fix the only caller of getxattr_cb to check the returned size
against the buffer length and return -ERANGE if it doesn't fit.
Drop the same check in ceph_vxattrcb_layout and just rely on the
caller to handle it.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Acked-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The getxattr_cb functions return size_t, which is unsigned and then
cast that value to int and then ssize_t before returning it. While all
of this works, it relies on implicit casting rules for signed/unsigned
conversions.
Change getxattr_cb to return ssize_t to better conform with what the
caller actually wants. Also, remove some suspicious casts.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Acked-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Client uses this flag to tell mds if there is more cap snap need to
flush. It's mainly for the case that client needs to re-send cap/snap
flushes after mds failover, but CEPH_CAP_ANY_FILE_WR on corresponding
inodes are all released before mds failover.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
We don't set SB_I_VERSION on ceph since we need to manage it ourselves,
so we must increment it whenever we update the file times.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
handle_cap_export() may add placeholder caps to session that is in
opening state. These caps' session pointer become wild after session get
unregistered.
The fix is not to unregister session in opening state during mds failovers,
just let client to reconnect later when mds is recovered.
Link: https://tracker.ceph.com/issues/40190
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
get_quota_realm() enters infinite loop if quota inode has no caps.
This can happen after client gets evicted.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Luis Henriques <lhenriques@suse.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When creating new file/directory, use security_dentry_init_security() to
prepare selinux context for the new inode, then send openc/mkdir request
to MDS, together with selinux xattr.
security_dentry_init_security() only supports single security module and
only selinux has dentry_init_security hook. So only selinux is supported
for now. We can add support for other security modules once kernel has a
generic version of dentry_init_security()
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Also rename ceph_release_acls_info() to ceph_release_acl_sec_ctx().
And move their definitions to different files. This is preparation
for security label support.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
change1: fix below warning reported by coccicheck
/fs/ceph/export.c:371:33-39: WARNING: PTR_ERR_OR_ZERO can be used
change2: typecasted PTR_ERR_OR_ZERO to long as dout expecting long
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
It should call __ceph_dentry_dir_lease_touch() under dentry->d_lock.
Besides, ceph_dentry(dentry) can be NULL when called by LOOKUP_RCU
d_revalidate()
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
d_name_cmp() and update_dentry_lease() lock and unlock dentry->d_lock
respectively. Dentry may get renamed between them. The fix is moving
the dentry name compare into update_dentry_lease().
This patch introduce two version of update_dentry_lease(). One version
is for the case that parent inode is locked. It does not need to check
parent/target inode and dentry name. Another version is for the case
that parent inode is not locked. It checks parent/target inode and
dentry name after locking dentry->d_lock.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This barrier only applies to the read-modify-write operations; in
particular, it does not apply to the atomic64_set() primitive.
Replace the barrier with an smp_mb().
Fixes: fdd4e15838 ("ceph: rework dcache readdir")
Reported-by: "Paul E. McKenney" <paulmck@linux.ibm.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The vxattr value incorrectly places a "09" prefix to the nanoseconds
field, instead of providing it as a zero-pad width specifier after '%'.
Fixes: 3489b42a72 ("ceph: fix three bugs, two in ceph_vxattrcb_file_layout()")
Link: https://tracker.ceph.com/issues/39943
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
ceph_listxattr() now calculates the length of vxattrs dynamically, so
these helpers, which incorrectly ignore vxattr.exists_cb(), can be
removed.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
ceph_listxattr() incorrectly returns a length based on the static
ceph_vxattrs_name_size() value, which only takes into account whether
vxattrs are hidden, ignoring vxattr.exists_cb().
When filling the xattr buffer ceph_listxattr() checks VXATTR_FLAG_HIDDEN
and vxattr.exists_cb(). If both are false, we return an incorrect
(oversize) length.
Fix this behaviour by always calculating the vxattrs length at runtime,
taking both vxattr.hidden and vxattr.exists_cb() into account.
This bug is only exposed with the new "ceph.snap.btime" vxattr, as all
other vxattrs with a non-null exists_cb also carry VXATTR_FLAG_HIDDEN.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
MDS InodeStat v3 wire structures include a trailing snapshot creation
time member. Unmarshall this and retain it for a future vxattr.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
.name_size should use the same string as .name.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The problem is that if ceph_mdsc_build_path() fails then we set "path"
to NULL and the "pathlen" variable is uninitialized. Then we call
ceph_mdsc_free_path(path, pathlen) to clean up. Since "path" is NULL,
the function is a no-op but Smatch and UBSan still complain that
"pathlen" is uninitialized.
This patch doesn't change run time, it just silence the warnings.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
This cleanup allows the return value of the functions to be made void,
as no logic should care if these files succeed or not.
Cc: "Yan, Zheng" <zyan@redhat.com>
Cc: Sage Weil <sage@redhat.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: ceph-devel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20190612145538.GA18772@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When ceph_mdsc_build_path is handed a positive dentry, it will return a
zero-length path string with the base set to that dentry. This is not
what we want. Always include at least one path component in the string.
ceph_mdsc_build_path has behaved this way for a long time but it didn't
matter until recent d_name handling rework.
Fixes: 964fff7491 ("ceph: use ceph_mdsc_build_path instead of clone_dentry_name")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
We want to enable cross-filesystem copy_file_range functionality
where possible, so push the "same superblock only" checks down to
the individual filesystem callouts so they can make their own
decisions about cross-superblock copy offload and fallack to
generic_copy_file_range() for cross-superblock copy.
[Amir] We do not call ->remap_file_range() in case the files are not
on the same sb and do not call ->copy_file_range() in case the files
do not belong to the same filesystem driver.
This changes behavior of the copy_file_range(2) syscall, which will
now allow cross filesystem in-kernel copy. CIFS already supports
cross-superblock copy, between two shares to the same server. This
functionality will now be available via the copy_file_range(2) syscall.
Cc: Steve French <stfrench@microsoft.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that we have generic_copy_file_range(), remove it as a fallback
case when offloads fail. This puts the responsibility for executing
fallbacks on the filesystems that implement ->copy_file_range and
allows us to add operational validity checks to
generic_copy_file_range().
Rework vfs_copy_file_range() to call a new do_copy_file_range()
helper to execute the copying callout, and move calls to
generic_file_copy_range() into filesystem methods where they
currently return failures.
[Amir] overlayfs is not responsible of executing the fallback.
It is the responsibility of the underlying filesystem.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The function return 0 even when interrupted or try_get_cap_refs()
return error.
Fixes: 1199d7da2d ("ceph: simplify arguments and return semantics of try_get_cap_refs")
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
iput_final() may wait for reahahead pages. The wait can cause deadlock.
For example:
Workqueue: ceph-msgr ceph_con_workfn [libceph]
Call Trace:
schedule+0x36/0x80
io_schedule+0x16/0x40
__lock_page+0x101/0x140
truncate_inode_pages_range+0x556/0x9f0
truncate_inode_pages_final+0x4d/0x60
evict+0x182/0x1a0
iput+0x1d2/0x220
iterate_session_caps+0x82/0x230 [ceph]
dispatch+0x678/0xa80 [ceph]
ceph_con_workfn+0x95b/0x1560 [libceph]
process_one_work+0x14d/0x410
worker_thread+0x4b/0x460
kthread+0x105/0x140
ret_from_fork+0x22/0x40
Workqueue: ceph-msgr ceph_con_workfn [libceph]
Call Trace:
__schedule+0x3d6/0x8b0
schedule+0x36/0x80
schedule_preempt_disabled+0xe/0x10
mutex_lock+0x2f/0x40
ceph_check_caps+0x505/0xa80 [ceph]
ceph_put_wrbuffer_cap_refs+0x1e5/0x2c0 [ceph]
writepages_finish+0x2d3/0x410 [ceph]
__complete_request+0x26/0x60 [libceph]
handle_reply+0x6c8/0xa10 [libceph]
dispatch+0x29a/0xbb0 [libceph]
ceph_con_workfn+0x95b/0x1560 [libceph]
process_one_work+0x14d/0x410
worker_thread+0x4b/0x460
kthread+0x105/0x140
ret_from_fork+0x22/0x40
In above example, truncate_inode_pages_range() waits for readahead pages
while holding s_mutex. ceph_check_caps() waits for s_mutex and blocks
OSD dispatch thread. Later OSD replies (for readahead) can't be handled.
ceph_check_caps() also may lock snap_rwsem for read. So similar deadlock
can happen if iput_final() is called while holding snap_rwsem.
In general, it's not good to call iput_final() inside MDS/OSD dispatch
threads or while holding any mutex.
The fix is introducing ceph_async_iput(), which calls iput_final() in
workqueue.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
We have three workqueue for inode works. Later patch will introduce
one more work for inode. It's not good to introcuce more workqueue
and add more 'struct work_struct' to 'struct ceph_inode_info'.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to free software
foundation 51 franklin street fifth floor boston ma 02111 1301 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 27 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528170026.981318839@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license v2 as published
by the free software foundation this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 021110 1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 1 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.485313544@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have MODULE_LICENCE("GPL*") inside which was used in the initial
scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- a fix to enforce quotas set above the mount point (Luis Henriques)
- support for exporting snapshots through NFS (Zheng Yan)
- proper statx implementation (Jeff Layton). statx flags are mapped
to MDS caps, with AT_STATX_{DONT,FORCE}_SYNC taken into account.
- some follow-up dentry name handling fixes, in particular elimination
of our hand-rolled helper and the switch to __getname() as suggested
by Al (Jeff Layton)
- a set of MDS client cleanups in preparation for async MDS requests
in the future (Jeff Layton)
- a fix to sync the filesystem before remounting (Jeff Layton)
On the rbd side, work is on-going on object-map and fast-diff image
features.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAlzdgEkTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi2w0B/9AsskuQezu8HP0NumCNfdgfI02r6d1
1ZixMp6q8AAtOZYHP0bmiLzaETwC3+sRkD+8nX5DWuFISyjkTlRn8f7wnoziWkBT
bBmL21fufkSKXN41VFCdolAbUPCKuA8+Fr7YE2hCl517ejbf47W+htv7+a56eTiR
iAiDyVYokB8sj7WTVW6ET4HJTvJly1Z4QUNmy9Ljfzc8AvL2LFLOe6FRsJtIThdx
aE00RX9EQsKO2v9ROd6jDmZocg50TvFmgF14A5GFfMmFrxJuri2yEI4iZd3hSKu2
yZ+fBWmRy4E9w5E20qufrM+bSVjA+Zi7aiTMriaBm54aYtflgJ5gxhFI
=68dZ
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.2-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"On the filesystem side we have:
- a fix to enforce quotas set above the mount point (Luis Henriques)
- support for exporting snapshots through NFS (Zheng Yan)
- proper statx implementation (Jeff Layton). statx flags are mapped
to MDS caps, with AT_STATX_{DONT,FORCE}_SYNC taken into account.
- some follow-up dentry name handling fixes, in particular
elimination of our hand-rolled helper and the switch to __getname()
as suggested by Al (Jeff Layton)
- a set of MDS client cleanups in preparation for async MDS requests
in the future (Jeff Layton)
- a fix to sync the filesystem before remounting (Jeff Layton)
On the rbd side, work is on-going on object-map and fast-diff image
features"
* tag 'ceph-for-5.2-rc1' of git://github.com/ceph/ceph-client: (29 commits)
ceph: flush dirty inodes before proceeding with remount
ceph: fix unaligned access in ceph_send_cap_releases
libceph: make ceph_pr_addr take an struct ceph_entity_addr pointer
libceph: fix unaligned accesses in ceph_entity_addr handling
rbd: don't assert on writes to snapshots
rbd: client_mutex is never nested
ceph: print inode number in __caps_issued_mask debugging messages
ceph: just call get_session in __ceph_lookup_mds_session
ceph: simplify arguments and return semantics of try_get_cap_refs
ceph: fix comment over ceph_drop_caps_for_unlink
ceph: move wait for mds request into helper function
ceph: have ceph_mdsc_do_request call ceph_mdsc_submit_request
ceph: after an MDS request, do callback and completions
ceph: use pathlen values returned by set_request_path_attr
ceph: use __getname/__putname in ceph_mdsc_build_path
ceph: use ceph_mdsc_build_path instead of clone_dentry_name
ceph: fix potential use-after-free in ceph_mdsc_build_path
ceph: dump granular cap info in "caps" debugfs file
ceph: make iterate_session_caps a public symbol
ceph: fix NULL pointer deref when debugging is enabled
...
Hi Linus,
This is my very first pull-request. I've been working full-time as
a kernel developer for more than two years now. During this time I've
been fixing bugs reported by Coverity all over the tree and, as part
of my work, I'm also contributing to the KSPP. My work in the kernel
community has been supervised by Greg KH and Kees Cook.
OK. So, after the quick introduction above, please, pull the following
patches that mark switch cases where we are expecting to fall through.
These patches are part of the ongoing efforts to enable -Wimplicit-fallthrough.
They have been ignored for a long time (most of them more than 3 months,
even after pinging multiple times), which is the reason why I've created
this tree. Most of them have been baking in linux-next for a whole development
cycle. And with Stephen Rothwell's help, we've had linux-next nag-emails
going out for newly introduced code that triggers -Wimplicit-fallthrough
to avoid gaining more of these cases while we work to remove the ones
that are already present.
I'm happy to let you know that we are getting close to completing this
work. Currently, there are only 32 of 2311 of these cases left to be
addressed in linux-next. I'm auditing every case; I take a look into
the code and analyze it in order to determine if I'm dealing with an
actual bug or a false positive, as explained here:
https://lore.kernel.org/lkml/c2fad584-1705-a5f2-d63c-824e9b96cf50@embeddedor.com/
While working on this, I've found and fixed the following missing
break/return bugs, some of them introduced more than 5 years ago:
84242b82d87850b51b6c5e420fe63509186e5034b5be8531817264235ee7cc5034a5d2479826cc865340f23df8df997abeeb2f10d82373307b00c5e65d25ff7a54a7ed5b3e7dc24bfa8f21ad0eaee6199ba8376ce1dc586a60a1a8e9b186f14e57562b4860747828eac5b974bee9cc44ba91162c930e3d0a
Once this work is finish, we'll be able to universally enable
"-Wimplicit-fallthrough" to avoid any of these kinds of bugs from
entering the kernel again.
Thanks
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
-----BEGIN PGP SIGNATURE-----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=k30z
-----END PGP SIGNATURE-----
Merge tag 'Wimplicit-fallthrough-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull Wimplicit-fallthrough updates from Gustavo A. R. Silva:
"Mark switch cases where we are expecting to fall through.
This is part of the ongoing efforts to enable -Wimplicit-fallthrough.
Most of them have been baking in linux-next for a whole development
cycle. And with Stephen Rothwell's help, we've had linux-next
nag-emails going out for newly introduced code that triggers
-Wimplicit-fallthrough to avoid gaining more of these cases while we
work to remove the ones that are already present.
We are getting close to completing this work. Currently, there are
only 32 of 2311 of these cases left to be addressed in linux-next. I'm
auditing every case; I take a look into the code and analyze it in
order to determine if I'm dealing with an actual bug or a false
positive, as explained here:
https://lore.kernel.org/lkml/c2fad584-1705-a5f2-d63c-824e9b96cf50@embeddedor.com/
While working on this, I've found and fixed the several missing
break/return bugs, some of them introduced more than 5 years ago.
Once this work is finished, we'll be able to universally enable
"-Wimplicit-fallthrough" to avoid any of these kinds of bugs from
entering the kernel again"
* tag 'Wimplicit-fallthrough-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (27 commits)
memstick: mark expected switch fall-throughs
drm/nouveau/nvkm: mark expected switch fall-throughs
NFC: st21nfca: Fix fall-through warnings
NFC: pn533: mark expected switch fall-throughs
block: Mark expected switch fall-throughs
ASN.1: mark expected switch fall-through
lib/cmdline.c: mark expected switch fall-throughs
lib: zstd: Mark expected switch fall-throughs
scsi: sym53c8xx_2: sym_nvram: Mark expected switch fall-through
scsi: sym53c8xx_2: sym_hipd: mark expected switch fall-throughs
scsi: ppa: mark expected switch fall-through
scsi: osst: mark expected switch fall-throughs
scsi: lpfc: lpfc_scsi: Mark expected switch fall-throughs
scsi: lpfc: lpfc_nvme: Mark expected switch fall-through
scsi: lpfc: lpfc_nportdisc: Mark expected switch fall-through
scsi: lpfc: lpfc_hbadisc: Mark expected switch fall-throughs
scsi: lpfc: lpfc_els: Mark expected switch fall-throughs
scsi: lpfc: lpfc_ct: Mark expected switch fall-throughs
scsi: imm: mark expected switch fall-throughs
scsi: csiostor: csio_wr: mark expected switch fall-through
...
Pull vfs inode freeing updates from Al Viro:
"Introduction of separate method for RCU-delayed part of
->destroy_inode() (if any).
Pretty much as posted, except that destroy_inode() stashes
->free_inode into the victim (anon-unioned with ->i_fops) before
scheduling i_callback() and the last two patches (sockfs conversion
and folding struct socket_wq into struct socket) are excluded - that
pair should go through netdev once davem reopens his tree"
* 'work.icache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (58 commits)
orangefs: make use of ->free_inode()
shmem: make use of ->free_inode()
hugetlb: make use of ->free_inode()
overlayfs: make use of ->free_inode()
jfs: switch to ->free_inode()
fuse: switch to ->free_inode()
ext4: make use of ->free_inode()
ecryptfs: make use of ->free_inode()
ceph: use ->free_inode()
btrfs: use ->free_inode()
afs: switch to use of ->free_inode()
dax: make use of ->free_inode()
ntfs: switch to ->free_inode()
securityfs: switch to ->free_inode()
apparmor: switch to ->free_inode()
rpcpipe: switch to ->free_inode()
bpf: switch to ->free_inode()
mqueue: switch to ->free_inode()
ufs: switch to ->free_inode()
coda: switch to ->free_inode()
...
xfstest generic/452 was triggering a "Busy inodes after umount" warning.
ceph was allowing the mount to go read-only without first flushing out
dirty inodes in the cache. Ensure we sync out the filesystem before
allowing a remount to proceed.
Cc: stable@vger.kernel.org
Link: http://tracker.ceph.com/issues/39571
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
GCC9 is throwing a lot of warnings about unaligned accesses by
callers of ceph_pr_addr. All of the current callers are passing a
pointer to the sockaddr inside struct ceph_entity_addr.
Fix it to take a pointer to a struct ceph_entity_addr instead,
and then have the function make a copy of the sockaddr before
printing it.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
To make it easier to correlate with MDS logs.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
I originally thought there was a potential race here, but the fact
that this is called with the mdsc->mutex held, ensures that the
last reference to the session can't be put here.
Still, it's clearer to just return the value from get_session here,
and may prevent a bug later if we ever rework this code to be less
reliant on mutexes.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The return of this function is rather complex. It can return 0 or 1,
and in the case of a 1 return, the "err" pointer will be filled out.
This necessitates a lot of copying of values.
We can achieve the same effect by just returning 0, 1 or a negative
error code, and drop the "err" argument from this function.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
It's not clear what AUTH_RDCACHE means in this context, and we're
clearly just dropping LINK caps here.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Yan, Zheng