Commit Graph

378 Commits

Author SHA1 Message Date
Benjamin Herrenschmidt 863c84b97c [PATCH] ppc: Fix ppc32 build after 64K pages
Oops, some last minute changes caused the 64K pages patch to break ppc32
build, this fixes it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:23 -08:00
David Gibson 7d24f0b8a5 [PATCH] ppc64: Fix bug in SLB miss handler for hugepages
This patch, however, should be applied on top of the 64k-page-size patch to
fix some problems with hugepage (some pre-existing, another introduced by
this patch).

The patch fixes a bug in the SLB miss handler for hugepages on ppc64
introduced by the dynamic hugepage patch (commit id
c594adad56) due to a misunderstanding of the
srd instruction's behaviour (mea culpa).  The problem arises when a 64-bit
process maps some hugepages in the low 4GB of the address space (unusual).
In this case, as well as the 256M segment in question being marked for
hugepages, other segments at 32G intervals will be incorrectly marked for
hugepages.

In the process, this patch tweaks the semantics of the hugepage bitmaps to
be more sensible.  Previously, an address below 4G was marked for hugepages
if the appropriate segment bit in the "low areas" bitmask was set *or* if
the low bit in the "high areas" bitmap was set (which would mark all
addresses below 1TB for hugepage).  With this patch, any given address is
governed by a single bitmap.  Addresses below 4GB are marked for hugepage
if and only if their bit is set in the "low areas" bitmap (256M
granularity).  Addresses between 4GB and 1TB are marked for hugepage iff
the low bit in the "high areas" bitmap is set.  Higher addresses are marked
for hugepage iff their bit in the "high areas" bitmap is set (1TB
granularity).

To avoid conflicts, this patch must be applied on top of BenH's pending
patch for 64k base page size [0].  As such, this patch also addresses a
hugepage problem introduced by that patch.  That patch allows hugepages of
1MB in size on hardware which supports it, however, that won't work when
using 4k pages (4 level pagetable), because in that case hugepage PTEs are
stored at the PMD level, and each PMD entry maps 2MB.  This patch simply
disallows hugepages in that case (we can do something cleverer to re-enable
them some other day).

Built, booted, and a handful of hugepage related tests passed on POWER5
LPAR (both ARCH=powerpc and ARCH=ppc64).

[0] http://gate.crashing.org/~benh/ppc64-64k-pages.diff

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:23 -08:00
Paul Mackerras c613523455 Merge ../linux-2.6 2005-11-07 14:42:09 +11:00
Paul Mackerras 2249ca9d60 powerpc: Various UP build fixes
Mostly this involves adding #include <asm/smp.h>, since that defines
things like boot_cpuid[_phys] and [gs]et_hard_smp_processor_id, which
are SMP-related but still needed on UP.  This incorporates fixes
posted by Olof Johansson and Heikki Lindholm.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-07 13:18:13 +11:00
David Gibson dcad47fc42 [PATCH] powerpc: Kill ppcdebug
The ancient ppcdebug/PPCDBG mechanism is now only used in two places.
First, in the hash setup code, one of the bits allows the size of the
hash table to be reduced by a factor of 8 - which would be better
accomplished with a command line option for that purpose.  The other
was a bunch of bus walking related messages in the iSeries code, which
would seem to be insufficient reason to keep the mechanism.

This patch removes the last traces of this mechanism.

Built and booted on iSeries and pSeries POWER5 LPAR (ARCH=powerpc).

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-07 12:37:45 +11:00
Olof Johansson 723925b7b1 [PATCH] powerpc: Nicer printing of address at oops
Add nicer printing of faulting address on unresolvable kernel faults.

Makes life a little easier for those who don't know how to decode our
register contents at oops time.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-07 12:37:28 +11:00
Benjamin Herrenschmidt 3c726f8dee [PATCH] ppc64: support 64k pages
Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel
base page size to 64K.  The resulting kernel still boots on any
hardware.  On current machines with 4K pages support only, the kernel
will maintain 16 "subpages" for each 64K page transparently.

Note that while real 64K capable HW has been tested, the current patch
will not enable it yet as such hardware is not released yet, and I'm
still verifying with the firmware architects the proper to get the
information from the newer hypervisors.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-06 16:56:47 -08:00
Paul Mackerras e2f2e58e79 powerpc: import a fix from arch/ppc/mm/pgtable.c
... namely, the change to the 2-argument pte_alloc_kernel.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-31 14:40:03 +11:00
Paul Mackerras 734d652480 powerpc: apply recent changes to merged code
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-31 13:57:01 +11:00
Paul Mackerras 23fd07750a Merge ../linux-2.6 by hand 2005-10-31 13:37:12 +11:00
Paul Mackerras cf00a8d18b powerpc: Fix bug arising from having multiple memory_limit variables
We had a static memory_limit in prom.c, and then another one defined
in setup_64.c and used in numa.c, which resulted in the kernel crashing
when mem=xxx was given on the command line.  This puts the declaration
in system.h and the definition in mem.c.  This also moves the
definition of tce_alloc_start/end out of setup_64.c.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-31 13:07:02 +11:00
Paul Mackerras 3ee1fcac33 powerpc: import a gfp_t fix to arch/powerpc/mm/pgtable_32.c
This applies the same fix as Al Viro recently made to
arch/ppc/mm/pgtable.c.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 22:10:38 +10:00
Roland Dreier 8b150478ae [PATCH] ppc: make phys_mem_access_prot() work with pfns instead of addresses
Change the phys_mem_access_prot() function to take a pfn instead of an
address.  This allows mmap64() to work on /dev/mem for addresses above 4G
on 32-bit architectures.  We start with a pfn in mmap_mem(), so there's no
need to convert to an address; in fact, it's actively bad, since the
conversion can overflow when the address is above 4G.

Similarly fix the ppc32 page_is_ram() function to avoid a conversion to an
address by directly comparing to max_pfn.  Working with max_pfn instead of
high_memory fixes page_is_ram() to give the right answer for highmem pages.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 14:25:49 +10:00
Kumar Gala cffb09ce6b [PATCH] powerpc: Fix warning related to do_dabr
do_dabr() is not relevant on 40x or Book-E processors so dont build it

Signed-off-by: Kumar K. Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 20:51:19 +10:00
David Gibson e37bc5df8e [PATCH] powerpc: Purge bootinfo.h
With ARCH=powerpc we assume the presence of a device tree, so we don't
require any support for the old bi_recs method of passing boot
parameters.  Likewise, we've never needed it for ppc64, but we still
had an include/asm-ppc64/bootinfo.h from which nothing was used.  This
patch removes that file, and all references to it in arch/ppc64 and
arch/powerpc.  A related, unused variable 'boot_mem_size' is also
removed from setup_32.c.  The bootinfo stuff remains in ARCH=ppc for
the time being.

Built and booted on Power5 (ARCH=ppc64 and ARCH=powerpc), built for
32-bit powermac (ARCH=powerpc and ARCH=ppc).

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 20:50:46 +10:00
Paul Mackerras fa39dc437a powerpc32: Limit memory to lowmem if !CONFIG_HIGHMEM.
This trims off the extra unusable memory from the lmb structure,
so we don't try to use it.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 21:54:21 +10:00
Paul Mackerras 985990137e Merge changes from linux-2.6 by hand 2005-10-22 16:51:34 +10:00
Paul Mackerras 5c8c56ebdf powerpc: Move agp_special_page export to where it is defined
... instead of exporting it in arch/*/kernel/ppc_ksyms.c.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-22 14:42:51 +10:00
Kumar Gala b15125fa81 [PATCH] powerpc: Some more fixes to allow building for a Book-E processor
Some minor fixes that are needed if we are building for a book-e
processor.

Signed-off-by: Kumar K. Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 09:43:32 +10:00
Paul Mackerras 30cd4a4e9c powerpc: Initialize btext subsystem later, after prom_init
We were initializing the btext stuff from prom_init(), thus breaking
the rule that all communication between prom_init() and the rest of
the kernel has to be via the flattened device tree.  This removes
the btext initialization calls from prom_init() and initializes it
instead after the device tree is unflattened.  It would be nice to
do it earlier, but that needs some more infrastructure to find the
properties we need in the flattened device tree.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-17 19:20:46 +10:00
Paul Mackerras 3eac8c69d1 powerpc: Move default hash table size calculation to hash_utils_64.c
We weren't computing the size of the hash table correctly on iSeries
because the relevant code in prom.c was #ifdef CONFIG_PPC_PSERIES.
This moves the code to hash_utils_64.c, makes it unconditional, and
cleans it up a bit.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-12 16:58:53 +10:00
Stephen Rothwell 3a5f8c5f78 powerpc: make iSeries boot again
On ARCH=ppc64 we were getting htab_hash_mask recalculated
to the correct value for our particular machine by accident.
In the merge tree, that code was commented out, so htab_hash_mask
was being corrupted.

We now set ppc64_pft_size instead which gets htab_has_mask
calculated correctly for us later.  We should put an
ibm,pft-size property in the device tree at some point.

Also set -mno-minimal-toc in some makefiles.
Allow iSeries to configure PROC_DEVICETREE.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-12 10:58:00 +10:00
Paul Mackerras b3b8dc6c07 powerpc: Use reg.h instead of processor.h when we just want reg names
Now that the register names and bit definitions are all in reg.h,
use that instead of processor.h in assembly code in a few places.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:20:10 +10:00
Paul Mackerras ab1f9dac6e powerpc: Merge arch/ppc64/mm to arch/powerpc/mm
This moves the remaining files in arch/ppc64/mm to arch/powerpc/mm,
and arranges that we use them when compiling with ARCH=ppc64.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 21:58:35 +10:00
Paul Mackerras 70d64ceaa1 powerpc: Rename files to have consistent _32/_64 suffixes
This doesn't change any code, just renames things so we consistently
have foo_32.c and foo_64.c where we have separate 32- and 64-bit
versions.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 21:52:43 +10:00
Paul Mackerras 7c8c6b9776 powerpc: Merge lmb.c and make MM initialization use it.
This also creates merged versions of do_init_bootmem, paging_init
and mem_init and moves them to arch/powerpc/mm/mem.c.  It gets rid
of the mem_pieces stuff.

I made memory_limit a parameter to lmb_enforce_memory_limit rather
than a global referenced by that function.  This will require some
small changes to ppc64 if we want to continue building ARCH=ppc64
using the merged lmb.c.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-06 12:23:33 +10:00
Paul Mackerras 20c8c21063 powerpc: Fixes to get the merged kernel to boot on powermac.
This merges ppc_ksyms.c, puts back the actual do_execve call in
sys_execve, makes init_MMU call find_end_of_memory rather than
ppc_md.find_end_of_memory (every platform has a device tree
with a /memory node now, right?) and fixes some problems with the
mpic initialization on newworld powermacs.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 20:28:14 +10:00
Paul Mackerras 14cf11af6c powerpc: Merge enough to start building in arch/powerpc.
This creates the directory structure under arch/powerpc and a bunch
of Kconfig files.  It does a first-cut merge of arch/powerpc/mm,
arch/powerpc/lib and arch/powerpc/platforms/powermac.  This is enough
to build a 32-bit powermac kernel with ARCH=powerpc.

For now we are getting some unmerged files from arch/ppc/kernel and
arch/ppc/syslib, or arch/ppc64/kernel.  This makes some minor changes
to files in those directories and files outside arch/powerpc.

The boot directory is still not merged.  That's going to be interesting.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 16:04:21 +10:00