Heiko Stübner justified pretty well the change in commit e330eb86ba
("ARM: multi_v7_defconfig: enable Rockchip io-domain driver"). This
change is also needed for arm64 rockchip boards, so, do the same for arm64.
The io-domain driver is necessary to notify the soc about voltages
changes happening on supplying regulators. Probably the most important
user right now is the mmc tuning code, where the soc needs to get
notified when the voltage is dropped to the 1.8V point.
As this option is necessary to successfully tune UHS cards etc, it
should get built in. Otherwise, tuning will fail with,
dwmmc_rockchip fe320000.dwmmc: All phases bad!
mmc0: tuning execution failed: -5
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enables typec phyter and extcon driver for cable detection that is used by
USB 3.0 controller for Rockchip rk3399 SoCs.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Alexandre Courbot <acourbot@chromium.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable the following to allow them to be more widely exercised:
* Newly added R8A77965 and R8A77980 SoCs
* PWM and USB as used on R-Car Gen3 SoCs
-----BEGIN PGP SIGNATURE-----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=heZq
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-defconfig-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Pull "Renesas ARM64 Based SoC Defconfig Updates for v4.17" from Simon Horman:
Enable the following to allow them to be more widely exercised:
* Newly added R8A77965 and R8A77980 SoCs
* PWM and USB as used on R-Car Gen3 SoCs
* tag 'renesas-arm64-defconfig-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: defconfig: enable R8A77965 SoC
arm64: defconfig: Enable PWM and USB for R-Car
arm64: defconfig: enable R8A77980 SoC
Enable the BPMP thermal and CPU frequency drivers as well as make sure
that the Tegra SMMU is enabled by default because there's no fun without
it. Also enable initial Tegra194 support.
-----BEGIN PGP SIGNATURE-----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=Lnk+
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.17-arm64-defconfig' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc
Pull "arm64: Default configuration updates for v4.17-rc1" from Thierry Reding:
Enable the BPMP thermal and CPU frequency drivers as well as make sure
that the Tegra SMMU is enabled by default because there's no fun without
it. Also enable initial Tegra194 support.
* tag 'tegra-for-4.17-arm64-defconfig' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Enable the Tegra SMMU by default
arm64: defconfig: Enable CONFIG_TEGRA_BPMP_THERMAL
arm64: defconfig: Enable CONFIG_ARM_TEGRA186_CPUFREQ
arm64: defconfig: Enable NVIDIA Tegra194 support
This patch enables the CONFIG_STMMAC_ETH to the default arm64 defconfig:
-CONFIG_STMMAC_ETH=m
+CONFIG_STMMAC_ETH=y
+CONFIG_DWMAC_IPQ806X=m
+CONFIG_DWMAC_MESON=m
+CONFIG_DWMAC_ROCKCHIP=m
+CONFIG_DWMAC_SUNXI=m
+CONFIG_DWMAC_SUN8I=m
The STMMAC ethernet controller is on the Stratix10 platform, and thus needs
driver to be in the kernel image for NFS to work.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Display and graphics can't work together without an SMMU, so it is
effectively always getting enabled anyway.
Signed-off-by: Thierry Reding <treding@nvidia.com>
- Enable deadline IO scheduler to improve the performnace for some
usecaese without changing the default IO scheduler
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJaoqFIAAoJEAvIV27ZiWZcK1oP/3lBn9Yex3n9zrRfv/3KWZxX
Spri2eoAHAGXVnjgQOG6Hr3Xd8xss3UovRecJ5Vbla3/5S/wVGfA4dxdmBxl8x6g
mwUFaBhLS2ir2/apnLdppgfNpzOftHBqHDIjjxFMeWxLBD/00vvOAZNMdEzDZldB
g7fHotVsrZvVQWUe8luKRXrc7+I7XHS+JOZcqOk+4iAjz4YIwghbe1jlBHmTjN3q
J3yb8Pz4PfNMpnst4bW6zKS7Cw++yzyUZiZB+0A6kajzGR5e2pdcJI3tEHfb0Py9
8ThWH49uIOR/BHCGy5g6UAZ7amvZt0A4tA38QCb0gbXtV1ebr3Coe3Mo9Dm3nhPf
bBPX4OY114JRlsAH0dXWxtHI+pBh5xPbjMe7urD6bNP1ZxpG0LLRcb1XsGKqBPoB
zjdtMWb6T4jKj3n9W4SqT3a/1rwG6Ki0ACBRo9GVZEI3pWop0sCTyilLIpkbwqCl
9aU4QmdfsqKz8oxy63wqdjMk/ep8ybKSOSXXaGr/jUmwZ25kpkhb1K9AUiMZWU2k
cguV+zq4bb8L9L/qaLIQesMqwp76fvAIFP6qJ2lEtH+NuWUx6FtGkVV+0dSjGeCT
PZ/FkmvlJ5dBPZqM8dOf4zHh6k1tXn/Gyau9KnQYp5MJCHlDdHhLooS2AvfXJjzh
5hfhdS27JQc3IcURri6n
=BscW
-----END PGP SIGNATURE-----
Merge tag 'hisi-defconfig-for-4.17' of git://github.com/hisilicon/linux-hisi into next/soc
Pull "ARM64: hisilicon: defconfig updates for 4.17" from Wei Xu:
- Enable deadline IO scheduler to improve the performnace for some
usecaese without changing the default IO scheduler
* tag 'hisi-defconfig-for-4.17' of git://github.com/hisilicon/linux-hisi:
arm64: defconfig: enable IOSCHED_DEADLINE
Enable Tegra BPMP thermal sensor support by default, built as a module.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable Tegra186 CPU frequency scaling support by default.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable the various CPUFREQ governors and statistics to ease development.
Don't change the default governor - performance governor.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Enable the driver for the TSENS IP that is present across several QCOM
SoCs.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The APCS block is present on several Qualcomm SoCs e.g. 8916, 8996. On the
8916 it is needed to enable the clock controller that in turn enables
cpufreq on the platform while on the 8996 it is needed for communication
with RPM.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Enable NVIDIA Tegra194 support in the default 64-bit ARM configuration.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable support in arm64's defconfig for Socionext SynQuacer based
platforms, by enabling the arch Kconfig symbol, and enabling builtin
support for the ethernet, GPIO and SDHCI controllers
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
New crypto drivers have been introduced in v4.16 that implement the
SHA-512, SHA3 and SM3 secure hash algorithms using ARMv8.2 optional
instructions. Add these drivers to arm64's defconfig as modules.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
For certain workloads the deadline IO scheduler offers
particular advantages over other schedulers and has shown
to perform better, so enable it.
The default IO scheduler is unaffected by this change, and
currently is CFQ.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Enable the Renesas R-Car M3-N (R8A77965) SoC in the ARM64 defconfig.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Enables PWM controller, USB-DMAC that is used by HS-USB, USB 3.0
peripheral controller and USB 3.0 PHY for R-Car SoCs.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable the Renesas R-Car V3H (R8A77980) SoC in the ARM64 defconfig.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
These are mostly minor bugfixes, cleanup and many defconfig updates to
support added drivers. In particular OMAP and PXA keep cleaning up the
legacy code base, as usual.
Nvidia adds some more SoC support code for Tegra 186.
For the first time on years, we are actually adding a non-DT platform for,
the EP93xx based Liebherr controller BK3.1. It's a minor variation of
the EP93xx reference design and in active use, while EP93xx apparently
doesn't have enough new development to have any device tree support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=frm4
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Arnd Bergmann:
"These are mostly minor bugfixes, cleanup and many defconfig updates to
support added drivers. In particular OMAP and PXA keep cleaning up the
legacy code base, as usual.
Nvidia adds some more SoC support code for Tegra 186.
For the first time on years, we are actually adding a non-DT platform
for the EP93xx based Liebherr controller BK3.1. It's a minor variation
of the EP93xx reference design and in active use, while EP93xx
apparently doesn't have enough new development to have any device tree
support"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits)
ARM: omap: hwmod: fix section mismatch warnings
ARM: pxa/tosa-bt: add MODULE_LICENSE tag
arm64: defconfig: enable CONFIG_ACPI_APEI_EINJ
arm64: defconfig: enable EDAC GHES option
arm64: defconfig: enable CONFIG_ACPI_APEI_MEMORY_FAILURE
ARM: imx_v6_v7_defconfig: enable CONFIG_CPU_FREQ_STAT
Wind down ARM/TANGO port
ARM: davinci: constify gpio_led
ARM: davinci: drop unneeded newline
soc: Add SoC driver for Gemini
ARM: SAMSUNG: Add SPDX license identifiers
ARM: S5PV210: Add SPDX license identifiers
ARM: S3C64XX: Add SPDX license identifiers
ARM: S3C24XX: Add SPDX license identifiers
ARM: EXYNOS: Add SPDX license identifiers
ARM: imx: remove unused imx3 pm definitions
ARM: imx: don't abort MMDC probe if power saving status doesn't match
ARM: imx_v6_v7_defconfig: enable RTC_DRV_MXC_V2
ARM: imx_v6_v7_defconfig: Add missing config for DART-MX6 SoM
ARM: davinci: Use PTR_ERR_OR_ZERO()
...
Enable APEI EINJ for ARM64 to support the error injection.
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Acked-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable CONFIG_EDAC_GHES option for ARM64,so that the memory errors
are processed and reported to the user space.
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Acked-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable ACPI APEI MEMORY FAILURE option for ARM64,
so that memory errors will be handled.
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Acked-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Choose to compile and embed marvell_nand.c as NAND controller driver
instead of the legacy pxa3xx_nand.c for platforms with Marvell EBU
SoCs.
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Enables MUSB driver and the Allwinner glue layer driver by default.
All Allwinner SoCs (excluding the A80) have the Mentor Graphics Inventra
Multi-Point Hi-Speed OTG Controller (MHDRC). Enabling this extends test
coverage to this peripheral.
-----BEGIN PGP SIGNATURE-----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=ykqf
-----END PGP SIGNATURE-----
Merge tag 'sunxi-config64-for-4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/soc
Allwinner arm64 defconfig changes for 4.16
Enables MUSB driver and the Allwinner glue layer driver by default.
All Allwinner SoCs (excluding the A80) have the Mentor Graphics Inventra
Multi-Point Hi-Speed OTG Controller (MHDRC). Enabling this extends test
coverage to this peripheral.
* tag 'sunxi-config64-for-4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: defconfig: enable MUSB HDRC along with Allwinner glue
Signed-off-by: Olof Johansson <olof@lixom.net>
Adding the cpu frequency scaling support for Armada 37xx
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWjzhHyMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71WygAJ9poqfM0F76
GCywSaql9D//YLIMBwCggBJU4OCJCgNJx/KN9n0+WmaM65M=
=D4Xs
-----END PGP SIGNATURE-----
Merge tag 'mvebu-arm64-4.16-1' of git://git.infradead.org/linux-mvebu into next/soc
mvebu arm64 for 4.16 (part 1)
Adding the cpu frequency scaling support for Armada 37xx
* tag 'mvebu-arm64-4.16-1' of git://git.infradead.org/linux-mvebu:
arm64: defconfig: enable ARM_ARMADA_37XX_CPUFREQ
Signed-off-by: Olof Johansson <olof@lixom.net>
No Qualcomm SoC requires the "phy-qcom-8x16-usb.c" USB phy driver
support any more. Remove the code, and remove the config option
from the arm64 defconfig.
Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
No Qualcomm SoC requires the "phy-msm-usb.c" USB phy driver support
any more. Remove the code, and remove the config option from the
arm64 defconfig.
Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
No Qualcomm SoC requires the "ehci-msm.c" code any more. So remove
the code, and remove the config option from the arm64 defconfig.
Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Most development boards and devices have one or more LEDs. It is useful
during debugging if they can be wired to show different behaviours such as
disk or cpu activity or a load-average dependent heartbeat. Enable panic
and disk activity triggers so they can be tied to LED activity during
debugging as well.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add the cpu frequency scaling support for Armada 37xx by default, this
should allow a better coverage in kernel continuous integration tests.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Allwinner SoCs typically have a Mentor Graphics Inventra MUSB
dual role controller for USB OTG. This is need for verifying
gadget functions, so enable them by default.
Tested 'otg' mode with mass storage function.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
For Armada 7K/8K, enable NAND, RTC, comphy and 10G PHY in the
defconfig
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWeoQjSMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71SAGAJwN7iJ6Xywi
3DGgmYy/KtEm0/ZxcwCfZ6dFcGrSWo4IsPictpUL+x4TETk=
=Gmg4
-----END PGP SIGNATURE-----
Merge tag 'mvebu-arm64-4.15-1' of git://git.infradead.org/linux-mvebu into next/soc
Pull "mvebu arm64 for 4.15 (part 1)" from Gregory CLEMENT:
For Armada 7K/8K, enable NAND, RTC, comphy and 10G PHY in the
defconfig
* tag 'mvebu-arm64-4.15-1' of git://git.infradead.org/linux-mvebu:
arm64: defconfig: enable RTC on Armada 7K/8K SoCs
arm64: defconfig: enable NAND on Armada 7K/8K SoCs
arm64: defconfig: enable Marvell CP110 comphy
arm64: defconfig: enable the Marvell 10G PHY as a module
This enables the PCI host controller on 64-bit ARM. It is supported and
enabled via device tree on Tegra210 and Tegra186.
-----BEGIN PGP SIGNATURE-----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=nDdS
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.15-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc
Pull "arm64: tegra: Default configuration updates for v4.15-rc1" from Thierry Reding:
This enables the PCI host controller on 64-bit ARM. It is supported and
enabled via device tree on Tegra210 and Tegra186.
* tag 'tegra-for-4.15-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Enable Tegra PCI controller
Enable QCOM IOMMU driver for 'B' family devices, such as APQ8016 found on the
Dragonboard 410c. With this change, graphics console and GPU are working
fine (using mesa/freedreno for GPU driver).
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ThunderX needs its PCI host drivers to do anything useful, and
it's probably helpful to have networking by default too.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The driver has supported the 64-bit Tegra210 for a while now, so enable
it in the defconfig.
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Stephen Boyd reworked some Qualcomm USB code earlier this year.
The result requires a few different config options to be enabled
in order for the USB on the DragonBoard 410c to continue working,
but these were never added to arm64 "defconfig". As a result, USB
on that board stopped working during the v4.13-rc1 merge window.
Re-enable this functionality by setting the needed config options
in the arm64 "defconfig" file.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The Armada 38x RTC driver supports also the RTC controller found on the
Armada 7K/8K SoCs, so enable it.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Enable QCOM IOMMU driver for 'B' family devices, such as APQ8016 found on the
Dragonboard 410c. With this change, graphics console and GPU are working
fine (using mesa/freedreno for GPU driver).
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Enric Balletbo i Serra