This adds core architecture support for Imagination's Meta processor
cores, followed by some later miscellaneous arch/metag cleanups and
fixes which I kept separate to ease review:
- Support for basic Meta 1 (ATP) and Meta 2 (HTP) core architecture
- A few fixes all over, particularly for symbol prefixes
- A few privilege protection fixes
- Several cleanups (setup.c includes, split out a lot of metag_ksyms.c)
- Fix some missing exports
- Convert hugetlb to use vm_unmapped_area()
- Copy device tree to non-init memory
- Provide dma_get_sgtable()
Signed-off-by: James Hogan <james.hogan@imgtec.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)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=65cR
-----END PGP SIGNATURE-----
Merge tag 'metag-v3.9-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag
Pull new ImgTec Meta architecture from James Hogan:
"This adds core architecture support for Imagination's Meta processor
cores, followed by some later miscellaneous arch/metag cleanups and
fixes which I kept separate to ease review:
- Support for basic Meta 1 (ATP) and Meta 2 (HTP) core architecture
- A few fixes all over, particularly for symbol prefixes
- A few privilege protection fixes
- Several cleanups (setup.c includes, split out a lot of
metag_ksyms.c)
- Fix some missing exports
- Convert hugetlb to use vm_unmapped_area()
- Copy device tree to non-init memory
- Provide dma_get_sgtable()"
* tag 'metag-v3.9-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: (61 commits)
metag: Provide dma_get_sgtable()
metag: prom.h: remove declaration of metag_dt_memblock_reserve()
metag: copy devicetree to non-init memory
metag: cleanup metag_ksyms.c includes
metag: move mm/init.c exports out of metag_ksyms.c
metag: move usercopy.c exports out of metag_ksyms.c
metag: move setup.c exports out of metag_ksyms.c
metag: move kick.c exports out of metag_ksyms.c
metag: move traps.c exports out of metag_ksyms.c
metag: move irq enable out of irqflags.h on SMP
genksyms: fix metag symbol prefix on crc symbols
metag: hugetlb: convert to vm_unmapped_area()
metag: export clear_page and copy_page
metag: export metag_code_cache_flush_all
metag: protect more non-MMU memory regions
metag: make TXPRIVEXT bits explicit
metag: kernel/setup.c: sort includes
perf: Enable building perf tools for Meta
metag: add boot time LNKGET/LNKSET check
metag: add __init to metag_cache_probe()
...
Define rmb(), cpu_relax(), and CPUINFO_PROC for Meta so that the perf
tools can be built for Meta.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=NKkW
-----END PGP SIGNATURE-----
Merge tag 'arc-v3.9-rc1-late' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull new ARC architecture from Vineet Gupta:
"Initial ARC Linux port with some fixes on top for 3.9-rc1:
I would like to introduce the Linux port to ARC Processors (from
Synopsys) for 3.9-rc1. The patch-set has been discussed on the public
lists since Nov and has received a fair bit of review, specially from
Arnd, tglx, Al and other subsystem maintainers for DeviceTree, kgdb...
The arch bits are in arch/arc, some asm-generic changes (acked by
Arnd), a minor change to PARISC (acked by Helge).
The series is a touch bigger for a new port for 2 main reasons:
1. It enables a basic kernel in first sub-series and adds
ptrace/kgdb/.. later
2. Some of the fallout of review (DeviceTree support, multi-platform-
image support) were added on top of orig series, primarily to
record the revision history.
This updated pull request additionally contains
- fixes due to our GNU tools catching up with the new syscall/ptrace
ABI
- some (minor) cross-arch Kconfig updates."
* tag 'arc-v3.9-rc1-late' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (82 commits)
ARC: split elf.h into uapi and export it for userspace
ARC: Fixup the current ABI version
ARC: gdbserver using regset interface possibly broken
ARC: Kconfig cleanup tracking cross-arch Kconfig pruning in merge window
ARC: make a copy of flat DT
ARC: [plat-arcfpga] DT arc-uart bindings change: "baud" => "current-speed"
ARC: Ensure CONFIG_VIRT_TO_BUS is not enabled
ARC: Fix pt_orig_r8 access
ARC: [3.9] Fallout of hlist iterator update
ARC: 64bit RTSC timestamp hardware issue
ARC: Don't fiddle with non-existent caches
ARC: Add self to MAINTAINERS
ARC: Provide a default serial.h for uart drivers needing BASE_BAUD
ARC: [plat-arcfpga] defconfig for fully loaded ARC Linux
ARC: [Review] Multi-platform image #8: platform registers SMP callbacks
ARC: [Review] Multi-platform image #7: SMP common code to use callbacks
ARC: [Review] Multi-platform image #6: cpu-to-dma-addr optional
ARC: [Review] Multi-platform image #5: NR_IRQS defined by ARC core
ARC: [Review] Multi-platform image #4: Isolate platform headers
ARC: [Review] Multi-platform image #3: switch to board callback
...
I'm not sure why, but the hlist for each entry iterators were conceived
list_for_each_entry(pos, head, member)
The hlist ones were greedy and wanted an extra parameter:
hlist_for_each_entry(tpos, pos, head, member)
Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.
Besides the semantic patch, there was some manual work required:
- Fix up the actual hlist iterators in linux/list.h
- Fix up the declaration of other iterators based on the hlist ones.
- A very small amount of places were using the 'node' parameter, this
was modified to use 'obj->member' instead.
- Coccinelle didn't handle the hlist_for_each_entry_safe iterator
properly, so those had to be fixed up manually.
The semantic patch which is mostly the work of Peter Senna Tschudin is here:
@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;
type T;
expression a,c,d,e;
identifier b;
statement S;
@@
-T b;
<+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
...+>
[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This change adds a little documentation to the tests under
tools/testing/selftests/, based on akpm's explanation.
[akpm@linux-foundation.org: move from Documentation to tools/testing/selftests/README.txt]
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Do it one-per-line to reduce patch conflict pain.
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Test that reads from a newly-created efivarfs file (with no data written)
will return EOF.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Lingzhu Xiang <lxiang@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Lingzhu Xiang <lxiang@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This change adds a few initial efivarfs tests to the
tools/testing/selftests directory.
The open-unlink test is based on code from Lingzhu Xiang.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Lingzhu Xiang <lxiang@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Added ability to have all builds test warnings.
Fixed failing reboot when the reboot produces a non fatal error.
Config reading fixes and other cleanups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJRJEuRAAoJEOdOSU1xswtMXb8H/2zQDW4VAzJee4BQJohrIfSW
rpBIx8inOTPcmyFvJRpP2k+pCdaBnVah3K8tiOlTDWctl1kJzQP9e+Vep7BBuId4
Ujv844j8JFO5V2yv5V7xLofev9zFZ/cEZCns2Z1CL9kMFvu3sSoA/0hZ8JobOe0V
IeHdNBEZuyS2J7wWjo646SSVUH9FEMGqYretIDk90Sv86p5QQEyATZzh6j+hr964
PZSUYn/NeTTHLeml6oXgRJ7lRPszKJlrQEj8xTOkgm07NznNduqCx33/H4kJnnzf
G98TVVotKWHlVpEI4nAC5fpRLNsmulH6kHajjqiMLqkSQ+yfzSLAGjI6CWCKUyg=
=HvSU
-----END PGP SIGNATURE-----
Merge tag 'ktest-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest update from Steven Rostedt:
"Added ability to have all builds test warnings.
Fixed failing reboot when the reboot produces a non fatal error.
Config reading fixes and other cleanups"
* tag 'ktest-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Remove indexes from warnings check
ktest: Ignore warnings during reboot
ktest: Search for linux banner for successful reboot
ktest: Add make_warnings_file and process full warnings
ktest: Allow a test option to use its default option
ktest: Strip off '\n' when reading which files were modified
ktest: Do not require CONSOLE for build or install bisects
Here's the big char/misc driver patches for 3.9-rc1.
Nothing major here, just lots of different driver updates (mei, hyperv, ipack,
extcon, vmci, etc.).
All of these have been in the linux-next tree for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlEmZJgACgkQMUfUDdst+ymhZgCgo2dn37r9uMCwgTSpxSq92Je5
x8kAnRF1UnD6ZvySRIlLUBV5LW1YgFnK
=i5HH
-----END PGP SIGNATURE-----
Merge tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver patches from Greg Kroah-Hartman:
"Here's the big char/misc driver patches for 3.9-rc1.
Nothing major here, just lots of different driver updates (mei,
hyperv, ipack, extcon, vmci, etc.).
All of these have been in the linux-next tree for a while."
* tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (209 commits)
w1: w1_therm: Add force-pullup option for "broken" sensors
w1: ds2482: Added 1-Wire pull-up support to the driver
vme: add missing put_device() after device_register() fails
extcon: max8997: Use workqueue to check cable state after completing boot of platform
extcon: max8997: Set default UART/USB path on probe
extcon: max8997: Consolidate duplicate code for checking ADC/CHG cable type
extcon: max8997: Set default of ADC debounce time during initialization
extcon: max8997: Remove duplicate code related to set H/W line path
extcon: max8997: Move defined constant to header file
extcon: max77693: Make max77693_extcon_cable static
extcon: max8997: Remove unreachable code
extcon: max8997: Make max8997_extcon_cable static
extcon: max77693: Remove unnecessary goto statement to improve readability
extcon: max77693: Convert to devm_input_allocate_device()
extcon: gpio: Rename filename of extcon-gpio.c according to kernel naming style
CREDITS: update email and address of Harald Hoyer
extcon: arizona: Use MICDET for final microphone identification
extcon: arizona: Always take the first HPDET reading as the final one
extcon: arizona: Clear _trig_sts bits after jack detection
extcon: arizona: Don't HPDET magic when headphones are enabled
...
Here's the big USB merge for 3.9-rc1
Nothing major, lots of gadget fixes, and of course, xhci stuff.
All of this has been in linux-next for a while, with the exception of
the last 3 patches, which were reverts of patches in the tree that
caused problems, they went in yesterday.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlEmZ/kACgkQMUfUDdst+ylEhwCgyM0JEOgLuW7M8D+oNcitZn51
g7oAniD0IkLG8RCB8plLj+82AvthalCo
=bHSs
-----END PGP SIGNATURE-----
Merge tag 'usb-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB patches from Greg Kroah-Hartman:
"Here's the big USB merge for 3.9-rc1
Nothing major, lots of gadget fixes, and of course, xhci stuff.
All of this has been in linux-next for a while, with the exception of
the last 3 patches, which were reverts of patches in the tree that
caused problems, they went in yesterday."
* tag 'usb-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (190 commits)
Revert "USB: EHCI: make ehci-vt8500 a separate driver"
Revert "USB: EHCI: make ehci-orion a separate driver"
Revert "USB: update host controller Kconfig entries"
USB: update host controller Kconfig entries
USB: EHCI: make ehci-orion a separate driver
USB: EHCI: make ehci-vt8500 a separate driver
USB: usb-storage: unusual_devs update for Super TOP SATA bridge
USB: ehci-omap: Fix autoloading of module
USB: ehci-omap: Don't free gpios that we didn't request
USB: option: add Huawei "ACM" devices using protocol = vendor
USB: serial: fix null-pointer dereferences on disconnect
USB: option: add Yota / Megafon M100-1 4g modem
drivers/usb: add missing GENERIC_HARDIRQS dependencies
USB: storage: properly handle the endian issues of idProduct
testusb: remove all mentions of 'usbfs'
usb: gadget: imx_udc: make it depend on BROKEN
usb: omap_control_usb: fix compile warning
ARM: OMAP: USB: Add phy binding information
ARM: OMAP2: MUSB: Specify omap4 has mailbox
ARM: OMAP: devices: create device for usb part of control module
...
Here is the big driver core merge for 3.9-rc1
There are two major series here, both of which touch lots of drivers all
over the kernel, and will cause you some merge conflicts:
- add a new function called devm_ioremap_resource() to properly be
able to check return values.
- remove CONFIG_EXPERIMENTAL
If you need me to provide a merged tree to handle these resolutions,
please let me know.
Other than those patches, there's not much here, some minor fixes and
updates.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlEmV0cACgkQMUfUDdst+yncCQCfbmnQZju7kzWXk6PjdFuKspT9
weAAoMCzcAtEzzc4LXuUxxG/sXBVBCjW
=yWAQ
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core patches from Greg Kroah-Hartman:
"Here is the big driver core merge for 3.9-rc1
There are two major series here, both of which touch lots of drivers
all over the kernel, and will cause you some merge conflicts:
- add a new function called devm_ioremap_resource() to properly be
able to check return values.
- remove CONFIG_EXPERIMENTAL
Other than those patches, there's not much here, some minor fixes and
updates"
Fix up trivial conflicts
* tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits)
base: memory: fix soft/hard_offline_page permissions
drivercore: Fix ordering between deferred_probe and exiting initcalls
backlight: fix class_find_device() arguments
TTY: mark tty_get_device call with the proper const values
driver-core: constify data for class_find_device()
firmware: Ignore abort check when no user-helper is used
firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER
firmware: Make user-mode helper optional
firmware: Refactoring for splitting user-mode helper code
Driver core: treat unregistered bus_types as having no devices
watchdog: Convert to devm_ioremap_resource()
thermal: Convert to devm_ioremap_resource()
spi: Convert to devm_ioremap_resource()
power: Convert to devm_ioremap_resource()
mtd: Convert to devm_ioremap_resource()
mmc: Convert to devm_ioremap_resource()
mfd: Convert to devm_ioremap_resource()
media: Convert to devm_ioremap_resource()
iommu: Convert to devm_ioremap_resource()
drm: Convert to devm_ioremap_resource()
...
- Rework of the ACPI namespace scanning code from Rafael J. Wysocki
with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg,
Toshi Kani, and Yinghai Lu.
- ACPI power resources handling and ACPI device PM update from
Rafael J. Wysocki.
- ACPICA update to version 20130117 from Bob Moore and Lv Zheng
with contributions from Aaron Lu, Chao Guan, Jesper Juhl, and
Tim Gardner.
- Support for Intel Lynxpoint LPSS from Mika Westerberg.
- cpuidle update from Len Brown including Intel Haswell support, C1
state for intel_idle, removal of global pm_idle.
- cpuidle fixes and cleanups from Daniel Lezcano.
- cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri
with contributions from Stratos Karafotis and Rickard Andersson.
- Intel P-states driver for Sandy Bridge processors from
Dirk Brandewie.
- cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn.
- cpufreq fixes related to ordering issues between acpi-cpufreq and
powernow-k8 from Borislav Petkov and Matthew Garrett.
- cpufreq support for Calxeda Highbank processors from Mark Langsdorf
and Rob Herring.
- cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update
from Shawn Guo.
- cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat,
and Inderpal Singh.
- Support for "lightweight suspend" from Zhang Rui.
- Removal of the deprecated power trace API from Paul Gortmaker.
- Assorted updates from Andreas Fleig, Colin Ian King,
Davidlohr Bueso, Joseph Salisbury, Kees Cook, Li Fei,
Nishanth Menon, ShuoX Liu, Srinivas Pandruvada, Tejun Heo,
Thomas Renninger, and Yasuaki Ishimatsu.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=wijn
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael Wysocki:
- Rework of the ACPI namespace scanning code from Rafael J. Wysocki
with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg,
Toshi Kani, and Yinghai Lu.
- ACPI power resources handling and ACPI device PM update from Rafael
J Wysocki.
- ACPICA update to version 20130117 from Bob Moore and Lv Zheng with
contributions from Aaron Lu, Chao Guan, Jesper Juhl, and Tim Gardner.
- Support for Intel Lynxpoint LPSS from Mika Westerberg.
- cpuidle update from Len Brown including Intel Haswell support, C1
state for intel_idle, removal of global pm_idle.
- cpuidle fixes and cleanups from Daniel Lezcano.
- cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri with
contributions from Stratos Karafotis and Rickard Andersson.
- Intel P-states driver for Sandy Bridge processors from Dirk
Brandewie.
- cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn.
- cpufreq fixes related to ordering issues between acpi-cpufreq and
powernow-k8 from Borislav Petkov and Matthew Garrett.
- cpufreq support for Calxeda Highbank processors from Mark Langsdorf
and Rob Herring.
- cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update
from Shawn Guo.
- cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat,
and Inderpal Singh.
- Support for "lightweight suspend" from Zhang Rui.
- Removal of the deprecated power trace API from Paul Gortmaker.
- Assorted updates from Andreas Fleig, Colin Ian King, Davidlohr Bueso,
Joseph Salisbury, Kees Cook, Li Fei, Nishanth Menon, ShuoX Liu,
Srinivas Pandruvada, Tejun Heo, Thomas Renninger, and Yasuaki
Ishimatsu.
* tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (267 commits)
PM idle: remove global declaration of pm_idle
unicore32 idle: delete stray pm_idle comment
openrisc idle: delete pm_idle
mn10300 idle: delete pm_idle
microblaze idle: delete pm_idle
m32r idle: delete pm_idle, and other dead idle code
ia64 idle: delete pm_idle
cris idle: delete idle and pm_idle
ARM64 idle: delete pm_idle
ARM idle: delete pm_idle
blackfin idle: delete pm_idle
sparc idle: rename pm_idle to sparc_idle
sh idle: rename global pm_idle to static sh_idle
x86 idle: rename global pm_idle to static x86_idle
APM idle: register apm_cpu_idle via cpuidle
cpufreq / intel_pstate: Add kernel command line option disable intel_pstate.
cpufreq / intel_pstate: Change to disallow module build
tools/power turbostat: display SMI count by default
intel_idle: export both C1 and C1E
ACPI / hotplug: Fix concurrency issues and memory leaks
...
Pull cgroup changes from Tejun Heo:
"Nothing too drastic.
- Removal of synchronize_rcu() from userland visible paths.
- Various fixes and cleanups from Li.
- cgroup_rightmost_descendant() added which will be used by cpuset
changes (it will be a separate pull request)."
* 'for-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: fail if monitored file and event_control are in different cgroup
cgroup: fix cgroup_rmdir() vs close(eventfd) race
cpuset: fix cpuset_print_task_mems_allowed() vs rename() race
cgroup: fix exit() vs rmdir() race
cgroup: remove bogus comments in cgroup_diput()
cgroup: remove synchronize_rcu() from cgroup_diput()
cgroup: remove duplicate RCU free on struct cgroup
sched: remove redundant NULL cgroup check in task_group_path()
sched: split out css_online/css_offline from tg creation/destruction
cgroup: initialize cgrp->dentry before css_alloc()
cgroup: remove a NULL check in cgroup_exit()
cgroup: fix bogus kernel warnings when cgroup_create() failed
cgroup: remove synchronize_rcu() from rebind_subsystems()
cgroup: remove synchronize_rcu() from cgroup_attach_{task|proc}()
cgroup: use new hashtable implementation
cgroups: fix cgroup_event_listener error handling
cgroups: move cgroup_event_listener.c to tools/cgroup
cgroup: implement cgroup_rightmost_descendant()
cgroup: remove unused dummy cgroup_fork_callbacks()
Pull perf changes from Ingo Molnar:
"There are lots of improvements, the biggest changes are:
Main kernel side changes:
- Improve uprobes performance by adding 'pre-filtering' support, by
Oleg Nesterov.
- Make some POWER7 events available in sysfs, equivalent to what was
done on x86, from Sukadev Bhattiprolu.
- tracing updates by Steve Rostedt - mostly misc fixes and smaller
improvements.
- Use perf/event tracing to report PCI Express advanced errors, by
Tony Luck.
- Enable northbridge performance counters on AMD family 15h, by Jacob
Shin.
- This tracing commit:
tracing: Remove the extra 4 bytes of padding in events
changes the ABI. All involved parties (PowerTop in particular)
seem to agree that it's safe to do now with the introduction of
libtraceevent, but the devil is in the details ...
Main tooling side changes:
- Add 'event group view', from Namyung Kim:
To use it, 'perf record' should group events when recording. And
then perf report parses the saved group relation from file header
and prints them together if --group option is provided. You can
use the 'perf evlist' command to see event group information:
$ perf record -e '{ref-cycles,cycles}' noploop 1
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.385 MB perf.data (~16807 samples) ]
$ perf evlist --group
{ref-cycles,cycles}
With this example, default perf report will show you each event
separately.
You can use --group option to enable event group view:
$ perf report --group
...
# group: {ref-cycles,cycles}
# ========
# Samples: 7K of event 'anon group { ref-cycles, cycles }'
# Event count (approx.): 6876107743
#
# Overhead Command Shared Object Symbol
# ................ ....... ................. ..........................
99.84% 99.76% noploop noploop [.] main
0.07% 0.00% noploop ld-2.15.so [.] strcmp
0.03% 0.00% noploop [kernel.kallsyms] [k] timerqueue_del
0.03% 0.03% noploop [kernel.kallsyms] [k] sched_clock_cpu
0.02% 0.00% noploop [kernel.kallsyms] [k] account_user_time
0.01% 0.00% noploop [kernel.kallsyms] [k] __alloc_pages_nodemask
0.00% 0.00% noploop [kernel.kallsyms] [k] native_write_msr_safe
0.00% 0.11% noploop [kernel.kallsyms] [k] _raw_spin_lock
0.00% 0.06% noploop [kernel.kallsyms] [k] find_get_page
0.00% 0.02% noploop [kernel.kallsyms] [k] rcu_check_callbacks
0.00% 0.02% noploop [kernel.kallsyms] [k] __current_kernel_time
As you can see the Overhead column now contains both of ref-cycles
and cycles and header line shows group information also - 'anon
group { ref-cycles, cycles }'. The output is sorted by period of
group leader first.
- Initial GTK+ annotate browser, from Namhyung Kim.
- Add option for runtime switching perf data file in perf report,
just press 's' and a menu with the valid files found in the current
directory will be presented, from Feng Tang.
- Add support to display whole group data for raw columns, from Jiri
Olsa.
- Add per processor socket count aggregation in perf stat, from
Stephane Eranian.
- Add interval printing in 'perf stat', from Stephane Eranian.
- 'perf test' improvements
- Add support for wildcards in tracepoint system name, from Jiri
Olsa.
- Add anonymous huge page recognition, from Joshua Zhu.
- perf build-id cache now can show DSOs present in a perf.data file
that are not in the cache, to integrate with build-id servers being
put in place by organizations such as Fedora.
- perf top now shares more of the evsel config/creation routines with
'record', paving the way for further integration like 'top'
snapshots, etc.
- perf top now supports DWARF callchains.
- Fix mmap limitations on 32-bit, fix from David Miller.
- 'perf bench numa mem' NUMA performance measurement suite
- ... and lots of fixes, performance improvements, cleanups and other
improvements I failed to list - see the shortlog and git log for
details."
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (270 commits)
perf/x86/amd: Enable northbridge performance counters on AMD family 15h
perf/hwbp: Fix cleanup in case of kzalloc failure
perf tools: Fix build with bison 2.3 and older.
perf tools: Limit unwind support to x86 archs
perf annotate: Make it to be able to skip unannotatable symbols
perf gtk/annotate: Fail early if it can't annotate
perf gtk/annotate: Show source lines with gray color
perf gtk/annotate: Support multiple event annotation
perf ui/gtk: Implement basic GTK2 annotation browser
perf annotate: Fix warning message on a missing vmlinux
perf buildid-cache: Add --update option
uprobes/perf: Avoid uprobe_apply() whenever possible
uprobes/perf: Teach trace_uprobe/perf code to use UPROBE_HANDLER_REMOVE
uprobes/perf: Teach trace_uprobe/perf code to pre-filter
uprobes/perf: Teach trace_uprobe/perf code to track the active perf_event's
uprobes: Introduce uprobe_apply()
perf: Introduce hw_perf_event->tp_target and ->tp_list
uprobes/perf: Always increment trace_uprobe->nhit
uprobes/tracing: Kill uprobe_trace_consumer, embed uprobe_consumer into trace_uprobe
uprobes/tracing: Introduce is_trace_uprobe_enabled()
...
The index of a line where a warning is tested can be returned
differently on different versions of gcc (or same version compiled
differently). That is, a tab + space can give different results. This
causes the warning check to produce a false positive. Removing the
index from the check fixes this issue.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Although with uClibc there's more we need to do
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
The %name-prefix "prefix" syntax is not available on bison 2.3 and
older. Substitute with the -p "prefix" command-line option for
compatibility with older versions of bison.
This patch fixes this build error with older versions of bison.
CC util/sysfs.o
BISON util/pmu-bison.c
util/pmu.y:2.14-24: syntax error, unexpected string, expecting =
make: *** [util/pmu-bison.c] Error 1
Signed-off-by: Vinson Lee <vlee@twitter.com>
Tested-by: Li Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org # 3.4+
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/1360792138-29186-1-git-send-email-vlee@twitter.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's DWARF unwind support only for x86 archs, so limit the unwind.o
object to them only.
Without this building for other archs (e.g. cross compiling for ARM) is
broken.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: http://lkml.kernel.org/n/tip-viqtvd6hppqgt68zz4wlqm20@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add --skip-missing option for skipping symbols that cannot be used for
annotation. It's the case of kernel symbols that user doesn't have a
vmlinux image file.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360227734-375-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to differentiate source lines from asm line, print them with
gray color. To do this, it needs to be escaped since sometimes it
contains "<" and/or ">" characters so that it should not be considered
as a markup tags. Use glib's g_markup_escape_text() for this.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360227734-375-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Show multiple annotation result for each evsel. Each result represents
the most frquently sampled symbol/function for the evsel and it will be
shown in a tab window.
For this add a reference to main container (notebook) to the pgctx. At
the first call to annotate browser, hist_entry__find_annotations() will
setup a new browser, and next calls will add new tabs to the browser.
But it requires final perf_gtk__show_annotations() to start processing
GUI events.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360227734-375-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Basic implementation of perf annotate on GTK2. Currently only
shows first symbol. Add a new --gtk option to use it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360227734-375-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When perf annotate runs with no vmlinux file it cannot annotate kernel
symbols because the kallsyms only provides symbol addresses. So it
recommends to run perf buildid-cache to install proper vmlinux image.
But running perf buildid-cache -av vmlinux as the message gives me a
following error:
$ perf buildid-cache -av /home/namhyung/build/kernel/vmlinux
Couldn't add v: No such file or directory
Since the -a option receives a parameter, 'v' should not be after the
option.
In addition -a option is not work for this case since the build-id cache
already has a kallsyms with same build-id so it'll fail with EEXIST.
Use recently added -u (--update) option for it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360227734-375-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When adding vmlinux file to build-id cache, it'd be fail since kallsyms
dso with a same build-id was already added by perf record.
So one needs to remove the kallsyms first to add vmlinux into the cache.
Add --update option for doing it at once.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360227734-375-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The SMI counter is popular -- so display it by default
rather than requiring an option. What the heck,
we've blown the 80 column budget on many systems already...
Note that the value displayed is the delta
during the measurement interval.
The absolute value of the counter can still be seen with
the generic 32-bit MSR option, ie. -m 0x34
Signed-off-by: Len Brown <len.brown@intel.com>
When verbose is enabled, print the C1E-Enable
bit in MSR_IA32_POWER_CTL.
also delete some redundant tests on the verbose variable.
Signed-off-by: Len Brown <len.brown@intel.com>
This patch enables turbostat to run properly on the
next-generation Intel(R) Microarchitecture, code named "Haswell" (HSW).
HSW supports the BCLK and counters found in SNB.
Signed-off-by: Len Brown <len.brown@intel.com>
Commit 8a424bf40d (tools/usb: remove last USBFS
user) removed 'usbfs' files from the source but retained mentions of 'usbfs'
all over the place, most importantly in the misleading error messages printed
in case USB device files are not there. Remove all the mentions of 'usbfs'
for good now!
Signed-off-by: Sergei Shtylyov <sshtylyov@dev.rtsoft.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
So that we fix this regression:
[root@sandy linux]# perf test -v 15
15: Try 'use perf' in python, checking link problems :
--- start ---
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: /home/acme/git/build/perf/python/perf.so: undefined symbol: sysfs_find_mountpoint
---- end ----
Try 'use perf' in python, checking link problems: FAILED!
[root@sandy linux]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-8pf64bsdywg1gl9m55ul77hg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we avoid dragging symbol.o into the python binding.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-izjubje7ltd1srji5wb0ygwi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A sweep of the kernel for regex "kcalloc(sizeof" turned up 2 reversed
args, fixed in commit d3d09e1820 ("EDAC:
Fix kcalloc argument order") and also fixed in the networking commit
a1b1add07f ("gro: Fix kcalloc argument
order").
I know that was the regex used, because on seeing the 1st of these
changes, I wondered "how many other instances of this are there" and I
happened to just use "calloc(sizeof" as a regex and it in turn found
these additional reversed args instances in the perf code.
In the kcalloc cases, the changes are cosmetic, since the numbers are
simply multiplied. I had no desire to go data mining in userspace to
see if the same thing held true there, however.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1359594349-25912-1-git-send-email-paul.gortmaker@windriver.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ':GH' group modifier handling was just recently fixed, adding some
autommated tests to keep it that way. Adding tests for following events:
"{cycles,cache-misses:G}:H"
"{cycles,cache-misses:H}:G"
"{cycles:G,cache-misses:H}:u"
"{cycles:G,cache-misses:H}:uG"
Plus fixing test__group2 test.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1359971803-2343-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Let the perf_evsel::exclude_GH only prevent the reset of exclude_host
and exclude_guest attributes in case they were already set.
We cannot reset their values to 0, because they might have other
defaults set by event_attr_init.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1359971803-2343-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixing rwtop script race. The issue is caused by rwtop script triggering
SIGALRM and underneath pipe reading layer reporting error when
interrupted.
Fixing this by setting SA_RESTART for rwtop SIGALRM handler, which
avoids interruption of the pipe reading layer.
The discussion for this issue & fix is here:
https://lkml.org/lkml/2012/9/18/123
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Original-patch-by: Andrew Jones <drjones@redhat.com>
Cc: Andrew Jones <drjones@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360080351-3246-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we don't display group members' values for raw columns like
'Samples' and 'Period' when in group report mode.
Uniting '__hpp__percent_fmt' and '__hpp__raw_fmt' function under new
function __hpp__fmt. It's basically '__hpp__percent_fmt' code with new
'fmt_percent' bool parameter added saying whether raw number or
percentage should be printed.
This way raw columns print out all the group members when
in group report mode, like:
$ perf record -e '{cycles,cache-misses}' ls
...
$ perf report --group --show-total-period --stdio
...
# Overhead Period Command Shared Object Symbol
# ................ ........................ ....... ................. .................................
#
23.63% 11.24% 3331335 317 ls [kernel.kallsyms] [k] __lock_acquire
12.72% 0.00% 1793100 0 ls [kernel.kallsyms] [k] native_sched_clock
9.72% 0.00% 1369920 0 ls libc-2.14.90.so [.] _nl_find_locale
0.03% 0.07% 4476 2 ls [kernel.kallsyms] [k] intel_pmu_enable_all
0.00% 11.73% 0 331 ls ld-2.14.90.so [.] _dl_cache_libcmp
0.00% 11.06% 0 312 ls [kernel.kallsyms] [k] vma_interval_tree_insert
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1359981185-16819-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds per-processor socket count aggregation for system-wide
mode measurements. This is a useful mode to detect imbalance between
sockets.
To enable this mode, use --aggr-socket in addition
to -a. (system-wide).
The output includes the socket number and the number of online
processors on that socket. This is useful to gauge the amount of
aggregation.
# ./perf stat -I 1000 -a --aggr-socket -e cycles sleep 2
# time socket cpus counts events
1.000097680 S0 4 5,788,785 cycles
2.000379943 S0 4 27,361,546 cycles
2.001167808 S0 4 818,275 cycles
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1360161962-9675-3-git-send-email-eranian@google.com
[ committer note: Added missing man page entry based on above comments ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds:
- cpu_map__get_socket: get socked id from cpu
- cpu_map__build_socket_map: build socket map
- cpu_map__socket: gets acutal socket from logical socket
Those functions are used by uncore and processor socket-level
aggregation modes.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1360161962-9675-2-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I am getting segfaults *after* the time sorting of perf samples where
the event type is off the charts:
(gdb) bt
\#0 0x0807b1b2 in hists__inc_nr_events (hists=0x80a99c4, type=1163281902) at util/hist.c:1225
\#1 0x08070795 in perf_session_deliver_event (session=0x80a9b90, event=0xf7a6aff8, sample=0xffffc318, tool=0xffffc520,
file_offset=0) at util/session.c:884
\#2 0x0806f9b9 in flush_sample_queue (s=0x80a9b90, tool=0xffffc520) at util/session.c:555
\#3 0x0806fc53 in process_finished_round (tool=0xffffc520, event=0x0, session=0x80a9b90) at util/session.c:645
This is bizarre because the event has already been processed once --
before it was added to the samples queue -- and the event was found to
be sane at that time.
There seem to be 2 causes:
1. perf_evlist__mmap_read updates the read location even though there
are outstanding references to events sitting in the mmap buffers via the
ordered samples queue.
2. There is a single evlist->event_copy for all evlist entries.
event_copy is used to handle an event wrapping at the mmap buffer
boundary.
This patch addresses the second problem - making event_copy local to
each perf_mmap. With this change my highly repeatable use case no longer
fails.
The first problem is much more complicated and will be the subject of a
future patch.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1360098762-61827-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When setup_sorting() is called, 'str' is passed to strtok_r() but it's
not checked to have a valid pointer. As strtok_r() accepts NULL pointer
on a first argument and use the third argument in that case, it can
cause a trouble since our third argument, tmp, is not initialized.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1360130237-9963-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the setup_sorting() is called for parsing sort keys and exits
if it failed to add the sort key. As it's included in libperf it'd be
better returning an error code rather than exiting application inside of
the library.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1360130237-9963-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current _sort__sym_cmp() function is used for comparing symbols between
two hist entries on symbol, symbol_from and symbol_to sort keys. Those
functions pass addresses of symbols but it's meaningless since it gets
over-written inside of the _sort__sym_cmp function to a start address of
the symbol. So just get rid of them.
This might cause a difference than prior output for branch stacks since
it seems not using start address of the symbol but branch address.
However AFAICS it'd be same as it gets overwritten anyway.
Also remove redundant part of code in sort__sym_cmp().
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1360130237-9963-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Check whether both executables are present on the system before
continuing with the build instead of failing halfway, if either are
missing.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1359979554-9160-1-git-send-email-bp@alien8.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The __perf_evlist__set_leader() was setting the leader for all events in
the list except the first. Which means it assumed the first event
already had event->leader = event.
Seems like this should be the role of the function to also do this. This
is a requirement for an upcoming patch set.
Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20130131125437.GA3656@quad
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is for tui browser only. This patch will check the returned key of
tui hists browser, if it's K_SWITH_INPUT_DATA, then recreate a session
for the new selected data file.
V2: Move the setup_brower() before the "repeat" jump point.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1359873501-24541-2-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Based on perf report/top/scripts browser integration idea from acme.
This will enable user to runtime switch the data file, when this option
is selected, it will popup all the legal data files in current working
directory, and the filename selected by user is saved in the global
variable "input_name", and a new key 'K_SWITCH_INPUT_DATA' will be
passed back to the built-in command which will perform the switch.
This initial version only enables it for 'perf report'.
v2: rebase to latest 'perf/core' branch (6e1d4dd) of acme's perf tree
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1359873501-24541-1-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Change the default location to install acpidump into from /usr/bin
to /usr/sbin, as this tool needs to be run as root.
[rjw: Subject and changelog]
Signed-off-by: Thomas Renninger <trenn@suse.de>
Tested-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The reboot just wants to get to the next kernel. But if a warning (Call
Trace) appears, the monitor will report an error, and the reboot will
think something went wrong and power cycle the box, even though we
successfully made it to the next kernel.
Ignore warnings during the reboot until we get to the next kernel. It
will still timeout if we never get to the next kernel and then a power
cycle will happen. That's what we want it to do.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Sometimes when a test kernel passed fine, but on reboot it crashed,
ktest could get stuck and not proceed. This would be frustrating if you
let a test run overnight to find out the next morning that it was stuck
on the first test.
To fix this, I made reboot check for the REBOOT_SUCCESS_LINE. If the
line was not detected, then it would power cycle the box.
What it didn't cover was if the REBOOT_SUCCESS_LINE wasn't defined or if
a 'good' kernel did not display the line. Instead have it search for the
Linux banner "Linux version". The reboot just needs to get to the start
of the next kernel, it does not need to test if the next kernel makes it
to a boot prompt.
After we find the next kernel has booted, then we just wait for either
the REBOOT_SUCCESS_LINE to appear or the timeout.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There is no .gitignore in tools/vm, so 'git status' always show built
binaries. To ignore this, add .gitignore.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add '-g/--group' option for showing event groups. For simplicity it is
currently not compatible with other options.
$ perf evlist --group
{ref-cycles,cycles}
$ perf evlist
ref-cycles
cycles
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-20-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add report.group config option for setting default value of event
group view. It affects the report output only if perf.data contains
event group info.
A user can write .perfconfig file like below to enable group view by
default:
$ cat ~/.perfconfig
[report]
group = true
And it can be disabled through command line:
$ perf report --no-group
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-19-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When using event group viewer, it's better to show the group description
rather than the leader information alone.
If a leader did not contain any member, it's a non-group event.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-17-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we have all necessary information in the leader events and other
members don't, bypass members. Member events will be shown along with
the leaders if event group is enabled.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-16-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When event group feature is enabled, each column header is expanded to
match with the whole group column width. But this is not needed for
GTK+ browser since ti usually use variable-width fonts. So trim it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-15-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Show group members's overhead also when showing leader's if event
group is enabled.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranina@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-13-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Show group members' overhead also when showing the leader's if event
group is enabled.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-12-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move coloring logic into the hpp functions so that each value can
be colored independently. It'd required for event group view.
For overhead column, add a callback for printing 'folded_sign' of
callchains of a hist entry.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1358845787-1350-11-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Show group member's overhead also when showing the leader's if event
group is enabled.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-10-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hpp helpers do same job for each field so it was implemented as
macro in order to access those fields easily. But it gets cumbersome to
maintain a large function in a macro as the function grows. Factor it
out to a function with a little helper macro to access field.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hpp helpers do same job for each field so it was implemented as
macro in order to access those fields easily. But it gets cumbersome
to maintain a large function in a macro as the function grows. Factor
it out to a function with a little helper macro to access field.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Most of hpp helper functions do same jobs for different fields thus
consolidate them to appropriate functions/macros.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When event group is enabled, sorting hist entries on periods for output
should consider groups members' period also. To do that, build period
table using link/pair information and compare the table.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now the event grouping viewing requires linking all member hists in a
group to the leader's. Thus hists__output_resort should be called after
linking all events in evlist.
Introduce symbol_conf.event_group flag to determine whether the feature
is enabled or not.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Save group relationship information so that it can be restored when perf
report is running.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As some new fields for handling groups added, check them to be sure to
have valid values in test__group* cases.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a few of group-related field in struct perf_{evlist,evsel} so that
the group information in a evlist can be known easily. It only counts
groups which have more than 1 members since leader-only groups are
treated as non-group events.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removing one more memory leak found with valgrind.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-gnb1gms0k8wictmtm2umpr8u@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just return to the perf main() routine so that an unified exit path can
be followed and resources released, helping in finding memory leaks.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ro8oeodo96490nrhcph57atr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Although the patchcheck test checks for warnings in the files that were
changed, this check does not catch warnings that were caused by header
file changes and the warnings appear in C files not touched by the
commit.
Add a new option called WARNINGS_FILE. If this option is set, then the
file it points to is read before bulid, and the file should contain a
list of known warnings. If a warning appears in the build, this file is
checked, and if the warning does not exist in this file, then it fails
the build showing the new warning.
If the WARNINGS_FILE points to a file that does not exist, this will
cause any warning in the build to fail.
A new test is also added called "make_warnings_file". This test will
create do a build and record any warnings it finds into the
WARNINGS_FILE. This test is something that can be run before other tests
to build a warnings file of "known warnings", ie, warnings that were
there before your changes.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Options are allowed to use other options, for example:
LOG_FILE = ${OUTPUT_DIR}/${MACHINE}.log
where the option LOG_FILE used the options OUTPUT_DIR and MACHINE.
But if a test option were to use a default option, it will not get
substituted:
OUTPUT_DIR = ${THIS_DIR}/${MACHINE}
TEST_START
OUTPUT_DIR = ${OUTPUT_DIR}/t1
For the above test, OUTPUT_DIR will stay literally "${OUTPUT_DIR}/t1"
and not be converted to "${THIS_DIR}/${MACHINE}/t1". When the test runs,
it will pass the ${OUTPUT_DIR} to the shell, which would probaly
interpret it as "", and the output directory will end up as "/t1".
Change the code where if a test option has its own option name in
its defined field, and a default option exists, then substitute the
default option in its place.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The patchcheck test looks at what files are modified for each patch it
checks and makes sure that those files do not produce any warnings.
Unfortunately, when it read the diffstat, the newlines were added on the
files and this made compares miss warnings, and commits that should not
have passed, ktest let pass.
Fix this by using the perl command "chomp" that strips off whitespace at
the end of lines.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If the user is doing a build or install bisect, there's no reason to
have them define CONSOLE, as the console does not need to be read. The
console only needs to be read for boot tests.
CONSOLE is not required for normal build or install tests, let's not
require it for bisect tests with BISECT_TYPE of build or install.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
cppcheck reported:
[util/header.c:983]: (error) Used file that is not opened.
Thanks to Arnaldo Carvalho de Melo for pointing out that
fclose(NULL) is undefined behavior -> protect against it.
Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Link: http://lkml.kernel.org/r/1751778.SZQB4fNdIh@storm
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
cppcheck message:
[tools/perf/util/sort.c:277]: (error) Mismatching allocation and deallocation: fp
Also fix descriptor leak on error and always initialize the "fp" variable.
Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Link: http://lkml.kernel.org/r/1359112354.yZcisNZ4k0@storm
Link: http://lkml.kernel.org/r/2266358.qvDXKLvJ67@storm
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Can only be triggered via CROSS_COMPILE env var.
Detected by cppcheck.
Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Link: http://lkml.kernel.org/r/36736865.AIlztKhDqN@storm
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We print several '__u64' quantities using '%llu'. On powerpc, we by
default include '<asm-generic/int-l64.h> which results in __u64 being an
unsigned long. This causes compile warnings which are treated as errors
due to '-Werror'.
By defining __SANE_USERSPACE_TYPES__ we include <asm-generic/int-ll64.h>
and define __u64 as unsigned long long.
Changelog[v2]:
[Michael Ellerman] Use __SANE_USERSPACE_TYPES__ and avoid PRIu64
format specifier - which as Jiri Olsa pointed out, breaks on x86-64.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Anton Blanchard <anton@au1.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <ellerman@au1.ibm.com>
Cc: linuxppc-dev@ozlabs.org
Link: http://lkml.kernel.org/r/20130124054439.GA31588@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ->counts field was never freed in the current code. Add
perf_evsel__free_counts() function to free it properly.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1359078284-32080-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds a new printing mode for perf stat. It allows interval
printing. That means perf stat can now print event deltas at regular
time interval. This is useful to detect phases in programs.
The -I option enables interval printing. It expects an interval duration
in milliseconds. Minimum is 100ms. Once, activated perf stat prints
events deltas since last printout. All modes are supported.
$ perf stat -I 1000 -e cycles noploop 10
noploop for 10 seconds
# time counts events
1.000109853 2,388,560,546 cycles
2.000262846 2,393,332,358 cycles
3.000354131 2,393,176,537 cycles
4.000439503 2,393,203,790 cycles
5.000527075 2,393,167,675 cycles
6.000609052 2,393,203,670 cycles
7.000691082 2,393,175,678 cycles
The output format makes it easy to feed into a plotting program such as
gnuplot when the -I option is used in combination with the -x option:
$ perf stat -x, -I 1000 -e cycles noploop 10
noploop for 10 seconds
1.000084113,2378775498,cycles
2.000245798,2391056897,cycles
3.000354445,2392089414,cycles
4.000459115,2390936603,cycles
5.000565341,2392108173,cycles
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1359460064-3060-3-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This field will be used by commands which print counter deltas on
regular timer intervals, such as perf stat -I.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1359460064-3060-2-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit "perf: Add 'perf bench numa mem'..." added a NUMA performance
benchmark to perf. Make this optional and test for required
dependencies.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1359337882-21821-1-git-send-email-peter@hurleysoftware.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a suite of NUMA performance benchmarks.
The goal was simulate the behavior and access patterns of real NUMA
workloads, via a wide range of parameters, so this tool goes well
beyond simple bzero() measurements that most NUMA micro-benchmarks use:
- It processes the data and creates a chain of data dependencies,
like a real workload would. Neither the compiler, nor the
kernel (via KSM and other optimizations) nor the CPU can
eliminate parts of the workload.
- It randomizes the initial state and also randomizes the target
addresses of the processing - it's not a simple forward scan
of addresses.
- It provides flexible options to set process, thread and memory
relationship information: -G sets "global" memory shared between
all test processes, -P sets "process" memory shared by all
threads of a process and -T sets "thread" private memory.
- There's a NUMA convergence monitoring and convergence latency
measurement option via -c and -m.
- Micro-sleeps and synchronization can be injected to provoke lock
contention and scheduling, via the -u and -S options. This simulates
IO and contention.
- The -x option instructs the workload to 'perturb' itself artificially
every N seconds, by moving to the first and last CPU of the system
periodically. This way the stability of convergence equilibrium and
the number of steps taken for the scheduler to reach equilibrium again
can be measured.
- The amount of work can be specified via the -l loop count, and/or
via a -s seconds-timeout value.
- CPU and node memory binding options, to test hard binding scenarios.
THP can be turned on and off via madvise() calls.
- Live reporting of convergence progress in an 'at glance' output format.
Printing of convergence and deconvergence events.
The 'perf bench numa mem -a' option will start an array of about 30
individual tests that will each output such measurements:
# Running 5x5-bw-thread, "perf bench numa mem -p 5 -t 5 -P 512 -s 20 -zZ0q --thp 1"
5x5-bw-thread, 20.276, secs, runtime-max/thread
5x5-bw-thread, 20.004, secs, runtime-min/thread
5x5-bw-thread, 20.155, secs, runtime-avg/thread
5x5-bw-thread, 0.671, %, spread-runtime/thread
5x5-bw-thread, 21.153, GB, data/thread
5x5-bw-thread, 528.818, GB, data-total
5x5-bw-thread, 0.959, nsecs, runtime/byte/thread
5x5-bw-thread, 1.043, GB/sec, thread-speed
5x5-bw-thread, 26.081, GB/sec, total-speed
See the help text and the code for more details.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It is allocated at ui_browser__show(), so free it in its counterpart,
ui_browser__hide().
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-g449kvnbcpli4ceyxbe2jp1e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The callers of this function (perf_event__process_tracing_data) already
handles a negative value return as error, so just use pr_err() to log
the problem and return -1 instead of panic'ing.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-eeeljnecpi0zi5s7ux1mzdv9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of hand coded equivalent.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-42ldngi973f4ssvzlklo8t2k@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have memdup() exactly for that, remove open coded dup.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-tnsoexrgv6u9l125srq2c7su@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As suggested by tglx, 'self' should be replaced by something that is
more useful.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vse2c54m0yahx6p79tmoel03@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As suggested by tglx, 'self' should be replaced by something that is
more useful.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-933537sxtcz47qs0e0ledmrp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixing the dynamic array format field parsing.
Currently the event_read_fields function could segfault while parsing
dynamic array other than string type. The reason is the event->pevent
does not need to be set and gets dereferenced unconditionaly.
Also adding proper initialization of field->elementsize based on the
parsed dynamic type.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1359060403-32422-1-git-send-email-jolsa@redhat.com
[ committer note: Made a char pointer parameter const, as requested by Steven ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sometimes a test is problematic for some reason and one wants to skip it,
for instance:
[root@sandy ~]# perf test
1: vmlinux symtab matches kallsyms : Ok
2: detect open syscall event : Ok
3: detect open syscall event on all cpus : Ok
4: read samples using the mmap interface : Ok
5: parse events tests : Warning: bad op token {
Warning: bad op token {
Warning: bad op token {
Warning: bad op token {
Warning: bad op token {
Warning: function is_writable_pte not defined
Segmentation fault (core dumped)
So now we can use -s/--skip while the problematic tests are being fixed,
allowing us to test all the other entries:
[root@sandy ~]# perf test -s 5
1: vmlinux symtab matches kallsyms : Ok
2: detect open syscall event : Ok
3: detect open syscall event on all cpus : Ok
4: read samples using the mmap interface : Ok
5: parse events tests : Skip (user override)
6: x86 rdpmc test : Ok
7: Validate PERF_RECORD_* events & perf_sample fields : Ok
8: Test perf pmu format parsing : Ok
9: Test dso data interface : Ok
10: roundtrip evsel->name check : Ok
11: Check parsing of sched tracepoints fields : Ok
12: Generate and check syscalls:sys_enter_open event fields: Ok
13: struct perf_event_attr setup : Ok
14: Test matching and linking mutliple hists : Ok
15: Try 'use perf' in python, checking link problems : Ok
[root@sandy ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-klzd8p57jzdryafqkmlppcb1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just like strlist allows passing a list of entries to parse.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-em50vqvvmlnc6k9tw4xtixus@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can work with optional parameters that may not set up an
intlist.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-e9tmvgdzehqrza11zs0nbg7g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tracepoints used by the workqueue-stats script no longer exist so
trying to run the script results in:
# perf script record workqueue-stats
invalid or unsupported event: 'workqueue:workqueue_creation'
Run 'perf list' for a list of valid events
So remove the script until it can be reworked using the new workqueue
tracepoints.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lkml.kernel.org/r/e7a7637d5df9df86887c3bff7683574665ec5360.1358527965.git.tom.zanussi@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running the check-perf-trace scripts causes segfaults in both the Perl
and Python cases:
# perf script record check-perf-trace
# perf script -s libexec/perf-core/scripts/python/check-perf-trace.py
trace_begin
Segmentation fault (core dumped)
The reason is that the 'pevent' field was added to
perf_scripting_context but it wasn't hooked up with an actual pevent in
either case, so when one of the 'common' fields is accessed (in
util/trace-event-parse.c:get_common_fields()), pevent->events tries to
dereference a NULL pointer.
This sets the pevent field when the scripting context is set up.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lkml.kernel.org/r/d2b1b8166a6ca0a36e1f5255b88a8289058ba236.1358527965.git.tom.zanussi@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Only display the trace info if using the default event display. When
invoking scripts we assume they have complete control of what's
displayed so we shouldn't unconditionally display the trace info, and
when generating scripts we don't expect to see trace info obscuring the
output message.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lkml.kernel.org/r/12ec084ef2870178915c907d16cd1dfa19fbb39e.1358527965.git.tom.zanussi@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For some reason the libtraceevent tracepoint-parsing code is missing
the FIELD_IS_SIGNED flag-setting code, which causes problems for the
Perl trace event binding at least, since it ends up unable to
recognize negative numbers.
Things like checking for negative return values therefore fail, causing
scripts like rwtop to instead interpret the negative return value as a
large positive value, which in turn get added to e.g. read totals with
insanely invalid results.
So set the FIELD_IS_SIGNED flag for tracepoint events that specify
"signed:1".
Before:
# perf script record rw-by-pid
# perf script report rw-by-pid
read counts by pid:
pid comm # reads bytes_requested bytes_read
------ -------------------- ----------- ---------- ----------
753 Xorg 88 512000 7.74763251095801e+20
1619 firefox 42 462 2.58254417031934e+20
1232 gnome-shell 11 176 1.10680464442257e+20
1471 gnome-terminal 3 16366 18446744073709551615
1408 libsocialweb-co 2 32 18446744073709551613
After:
# perf script report rw-by-pid
read counts by pid:
pid comm # reads bytes_requested bytes_read
------ -------------------- ----------- ---------- ----------
753 Xorg 88 512000 2764
1619 firefox 42 462 126
1232 gnome-shell 11 176 40
1471 gnome-terminal 3 16366 10
1408 libsocialweb-co 2 32 8
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lkml.kernel.org/r/1471b5968821a455cf5168bb4567964e74ecf530.1358527965.git.tom.zanussi@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some would just call exit() anyway right after calling die() and the
main routine doesn't have to call it, just return the exit value.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-nzq0sdur6oq6lgkt2ipf4o8s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
They are only used in pmu.c, so no need to make them public in pmu.h.
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-3gu6vhyro22ywqcldy0gtegv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were using a homebrew equivalent, use the macro that is used
everywhere for this function.
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bp3wokafua1ecairau77jcy0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In tools/perf we use a convention where __ separates the struct name
from the function name for functions that operate on a struct instance.
Fix this usage by removing it from the struct names and fix also the
associated functions.
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kdcoh7uitivx68otqcz12aaz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In tools/perf we use a convention where __ separates the struct name
from the function name for functions that operate on a struct instance.
Fix this usage by removing it from the struct names and fix also the
associated functions.
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-rfj7acng5tukftb8hy1rrw08@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In tools/perf we use a convention where __ separates the struct name
from the function name for functions that operate on a struct instance.
Fix this usage by removing it from the struct names and fix also the
associated functions.
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-1tepcpohpvfg589pizx7tlkq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In tools/perf we use a convention where __ separates the struct name
from the function name for functions that operate on a struct instance.
Fix this usage by removing it from the struct parse_events_term and fix
also its associated functions.
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-h6vkql4jr7dv0096f1s6hldm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As we have ltrim() implementation in builtin-script.c move it to the
more generic location of util/string.c so that it can be used from other
places.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1358845787-1350-14-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On POWER, the 'perf format parsing' test always fails.
Looks like it is because memset() is being passed number of longs rather
than number of bytes. It is interesting that the test always passes on
my x86 box.
With this patch, the test passes on POWER and continues to pass on x86.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Anton Blanchard <anton@au1.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@ozlabs.org
Link: http://lkml.kernel.org/r/20130117172814.GA18882@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When make runs it tries to update the Makefile rules by reading all of
included Makefiles. During the perf build it checks PERF-VERSION-FILE
to get the current version number. But it triggers Makefile update so
that make runs again with the update Makefile and, in turn, users will
see duplicate CHK message on the second path.
Running make with -d option for debugging tells me this:
GNU Make 3.82
Built for x86_64-redhat-linux-gnu
Copyright (C) 2010 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Reading makefiles...
Reading makefile `Makefile'...
Reading makefile `../scripts/Makefile.include' (search path) (no ~ expansion)...
Reading makefile `config/utilities.mak' (search path) (no ~ expansion)...
Reading makefile `PERF-VERSION-FILE' (search path) (don't care) (no ~ expansion)...
Reading makefile `config/feature-tests.mak' (search path) (don't care) (no ~ expansion)...
CHK -fstack-protector-all
CHK -Wstack-protector
CHK -Wvolatile-register-var
...
Updating makefiles....
Considering target file `PERF-VERSION-FILE'.
Must remake target `PERF-VERSION-FILE'.
Invoking recipe from Makefile:52 to update target `PERF-VERSION-FILE'.
Putting child 0x14037a0 (PERF-VERSION-FILE) PID 31925 on the chain.
Live child 0x14037a0 (PERF-VERSION-FILE) PID 31925
PERF_VERSION = 3.8.rc3.gf751db6
Reaping winning child 0x14037a0 PID 31925
Removing child 0x14037a0 PID 31925 from chain.
Successfully remade target file `PERF-VERSION-FILE'.
...
Re-executing[1]: make -d <------------ here
GNU Make 3.82
Built for x86_64-redhat-linux-gnu
Copyright (C) 2010 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Reading makefiles...
Reading makefile `Makefile'...
Reading makefile `../scripts/Makefile.include' (search path) (no ~ expansion)...
Reading makefile `config/utilities.mak' (search path) (no ~ expansion)...
Reading makefile `PERF-VERSION-FILE' (search path) (don't care) (no ~ expansion)...
Reading makefile `config/feature-tests.mak' (search path) (don't care) (no ~ expansion)...
CHK -fstack-protector-all
CHK -Wstack-protector
CHK -Wvolatile-register-var
...
Actually PERF-VERSION-FILE is used only for perf.c to #define
PERF_VERSION macro. So make it like a C header file and include it
during compiling the perf.c file will remove the need of being
included into Makefile. Hench no need to update the Makefile and no
CHK lines anymore.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1358337594-10916-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These lines are came from GIT Makefile and never used for perf.
I found it from make -d output during working on previous patch.
Updating makefiles....
Considering target file `arch/x86/Makefile'.
No need to remake target `arch/x86/Makefile'.
Considering target file `config.mak'.
File `config.mak' does not exist.
Must remake target `config.mak'.
Failed to remake target file `config.mak'.
Considering target file `config.mak.autogen'.
File `config.mak.autogen' does not exist.
Must remake target `config.mak.autogen'.
Failed to remake target file `config.mak.autogen'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1358337594-10916-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Although the '>=' (and '<=') operator is handled properly in
libtraceevent, it emitted following spurious warnings on perf test:
$ perf test
5: parse events tests :
...
Warning: unknown op '>='
Warning: unknown op '>='
Warning: unknown op '>='
Warning: unknown op '>='
Warning: unknown op '>='
Warning: unknown op '>='
...
Add the operator to the checks.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1358236939-17393-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As noticed by Jiri, the hist_entry->branch_info.to/from maps need to be
marked as referenced to avoid problems later on. So we do this when the
hist_entry is allocated.
Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20130114140245.GA4692@quad
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factorize jump sanity checks from mark_jump_targets() and
draw_current_jump() in an is_valid_jump() function.
This fixes a segfault when moving the cursor over an invalid jump.
Signed-off-by: Frederik Deweerdt <frederik.deweerdt@xprog.eu>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20130114194716.GA4973@ks398093.ip-192-95-24.net
[ committer note: Make it a disasm_line method ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add description of sort keys to the perf-report document and also add
missing cpu and srcline keys to the command line help string.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1356599507-14226-11-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current perf report gets segmentation fault when a branch stack specific
sort key is provided by --sort option to a perf.data file which contains
no branch infomation. It's because those sort keys reference branch
info of a hist entry unconditionally. Maybe we can change it checks
whether such branch info is valid or not. But if the branch stacks are
not recorded, it'd be nop. Thus it'd be better to make those keys are
unselectable.
This patch separates those keys to a different dimension array, so that
if user passes such a key to a file which has no branch stack will get
following message rather than a segfault.
Error: Invalid --sort key: `symbol_from'
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reported-by: Stefan Beller <stefanbeller@googlemail.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1356599507-14226-10-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It doesn't need to compare to every sort key names since the index
already has the required information.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1356599507-14226-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When hists__calc_col_len() called, most of column length are refreshed
but it missed parent column. So if the parent sort key was used along
with other keys rests will be misalinged since parent has no proper
column width.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1356599507-14226-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The "pid" sort key prints "Command: Pid" output but it's misaligned.
It's because of the offset of 6 was added to the column length during
the calculation in order to reserve an space for Pid part but it isn't
honored when printed. The output before this patch was like this:
# Overhead Command: Pid Shared Object
# ........ ............. .................
#
99.70% noploop:17814 noploop
0.29% noploop:17814 [kernel.kallsyms]
0.01% noploop:17814 ld-2.15.so
Fix it by subtracting 6 for printing comm part.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1356599507-14226-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some functions have set __maybe_unused on its arguments that are used
actually. Remove them.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1356599507-14226-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some functions are misplaced along with other entries. Move them to a
right place so that it can be found together with related functions.
No functional change intended.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1356599507-14226-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before casting a type of a variable to string, convert_variable_type()
confirms that the type is a pointer or an array. then if it is a pointer
to char, it is casted to string. but in case of an array of char, it
isn't
Signed-off-by: H.C. Lee <hyc.lee@gmail.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/CANFS6bb75e8a_UtyAD9yF73hfXDy0N8tSjDz=a+Vna=Y8ORMHg@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Judging anonymous memory's vm_area_struct, perf_mmap_event's filename
will be set to "//anon" indicating this vma belongs to anonymous
memory.
Once hugepage is used, vma's vm_file points to hugetlbfs. In this way,
this vma will not be regarded as anonymous memory by is_anon_memory() in
perf user space utility.
Signed-off-by: Joshua Zhu <zhu.wen-jie@hp.com>
Cc: Akihiro Nagai <akihiro.nagai.hw@hitachi.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joshua Zhu <zhu.wen-jie@hp.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1357363797-3550-1-git-send-email-zhu.wen-jie@hp.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf bench prints header message for bench suite before starting the
benchmark. However if the stdout is redirected to a file and bench
suite forks child processes this (and possibly other debugging
messages too) will be repeated multiple times.
$ perf bench sched messaging
# Running sched/messaging benchmark...
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.100 [sec]
$ perf bench sched messaging > result.txt
$ wc -l result.txt
391
In this file, there were so many "Running sched/messaging benchmark..."
lines. This was because stdout is converted to fully-buffered due to
the redirection and inherited child processes. Other lines are printed
after reaping all those tasks.
So fix it by flushing stdout before starting bench suites.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1357637966-8216-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The elf.h header file is used for NO_LIBELF build too so it should be
included anyway. Also remove duplicated include of the header file in
symbol-*.c. This patch fixes following build error on NO_LIBELF build:
CC tests/hists_link.o
tests/hists_link.c: In function ‘setup_fake_machine’:
tests/hists_link.c:132:8: error: ‘STB_GLOBAL’ undeclared (first use in this function)
tests/hists_link.c:132:8: note: each undeclared identifier is reported only once for each function it appears in
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1356679009-32122-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
cppcheck reported:
[tools/perf/util/sysfs.c:50]: (error) Width 4096 given in format string
(no. 1) is larger than destination buffer 'sysfs_mountpoint[4096]',
use %4095s to prevent overflowing it
-> All other places in the kernel that use STR(PATH_MAX)
have a buffer size of PATH_MAX + 1.
Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Link: http://lkml.kernel.org/r/50D9D30B.8090002@intra2net.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
According to Documentation/Changes, the kernel should be buildable with
GNU make 3.80+. tools/perf/config/utilities.mak contains the "$(or"
construct, which requires make 3.81. This causes "make" to fail on
systems with GNU make 3.80.
Replace "$(or" with an equivalent "$(if" expression, to restore backward
compatibility. Also fix an issue where _get_attempt was called with only
one argument. This prevented the error message from printing the name of
the variable that can be used to fix the problem.
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1357680156-15520-1-git-send-email-alcooperx@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding a missing copyright header to parse-utils.c. Assuminng that the
license is LGPL like the rest of the trace-cmd library code.
Signed-off-by: Jon Stanley <jonstanley@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1347127251-4695-1-git-send-email-jonstanley@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
we've tested the wrong variable for allocation failure, fix it to
test the right one.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1356120062-2648-1-git-send-email-sasha.levin@oracle.com
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ui__error/warning functions use gtk infobar or statusbar and pr_*
functions use statusbar too. But after perf gtk context created but
those infobar and/or statusbar not yet set up, calling one of those
functions will get a segment fault.
Although current code has no problem, move these setting as early as
possible so that it can prevent the segfault from future change.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1356078018-31905-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Separate out common codes for setting up a browser, and move report/hist
browser codes into hists.c. The common codes can be used for annotation
browser.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1356078018-31905-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We already check that sym_l and sum_r are non-NULLs, no need to do it
twice.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1356030701-16284-12-git-send-email-sasha.levin@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that Jiri introduced TEST_SKIP, don't fail on the first test, just
skip it.
Requested-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-wtgs8rd7fjwfhx72pv4la127@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test can currently return one of 3 states: ok, fail, skip.
The ok and fail states are self-explanatory. The skip state means that
some of the conditions for running the test was not met, making it
impossible to even run the test. For instance, if the hardware doesn't
support the 'precise' level required by a test, it will be skipped.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/n/tip-04vnsdndarctfb1eii5c9hcy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 3786063 commit:
perf kvm: Rename perf_kvm to perf_kvm_stat
Moved the file_name from inside a local struct var that initialized some
of its members, thus zero initializing the not explicitely initialized
variables, one of which was 'file_name', to a standalone local variable,
but forgot to initialize it explicitely to NULL, so it then got some
undefined value, causing a segfault in strdup when it wasn't, by luck,
zero.
Fix it by explicitely initializing it to NULL.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/n/tip-qo2jevp1bdcnh8khzdazs17s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is always there, no sense in calling a function named
"perf_session__find_host_machine".
Also no sense in checking if that function return is NULL, so ditch
needless error handling.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-a6a3zx3afbrxo8p2zqm5mxo8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If there's not OUTPUT variable defined the PYTHONPATH ends up with
/python. We need to remove the extra '/'.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-h1hzfyfcdxjnuq9fin2cjwlr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That consolidates the grouping of host + guests, isolating a bit more of
functionality now centered on 'perf_session' that can be used
independently in tools that don't need a 'perf_session' instance, but
needs to have all the thread/map/symbol machinery.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-c700rsiphpmzv8klogojpfut@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was being used just for its stats member, so ditch session->hists and
use just what is needed, session->stats.
This completes the move support multiple events in the hists layer, the
last user of session->hists was 'perf diff' but Jiri Olsa has fixed that
some time ago.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pimk92kek8kcp4dmb1jakoro@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As this function deals exclusively with hists->stats.
Preparatory patch for removing the by now needless session->hists, that
should be just session->stats.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-be0o8si9f1z40cwoa534f7me@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were calling perf_session__process_machines(), that would first pass
the struct machine associated with the host to the provided callback,
perf_event__synthesize_guest_os() that would test if it was the host and
if so wouldn't do anything.
Ditch this contraption, just call directly machines__process with the
list of guests.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-x65vsxgzg4dvo3zqohtrrb9o@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use readn instead of read and check return value of do_write.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1355726345-29553-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current perf test code tries to execute python version 2 in order to
test attributes on perf_event_open syscall. However it's not default
python version anymore a system can have python v3 only or v2 with a
different name (e.g. python2). So if there's no such python interpreter
with the name 'python', the test would fail like this (yes, it's
happened on my new archlinux laptop :).
13: struct perf_event_attr setup :sh: python: command not found
FAILED!
As we can pass name of the python interpreter on make, use it for
the attr test also.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1355729101-31317-1-git-send-email-namhyung@kernel.org
[ committer note: Added the same mechanism to the python binding test ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding event parsing test for '*:*' tracepoints. Checking the count
matches all the tracepoints available plus current standard tracepoint
perf_event_attr check.
This test exposes warnings from traceevent lib about not being able to
parse some tracepoints' format data. Exposing these messages in the
automated test suite will probably speed up the fix ;-)
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1355749718-4355-4-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding support for wildcards '*?" in the tracepoint system part.
It's now possible to open all available tracepoints like:
# perf stat -e '*:*' ls
You might need to increase limit for open files via ulimit.
If ftrace events tracepoints are configured in, the record command fails
on above event selection because of them.
The stat command disables counters that fails to open, the record
command fails completely. We probably want to be smarter here.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1355749718-4355-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The test_attr infrastructure hooks on the sys_perf_event_open call,
checking if a variable is set and if so calling a function to intercept
calls and do the checking.
But both the variable and the function aren't on objects that are
linked on the python binding, breaking it:
# perf test -v 15
15: Try 'use perf' in python, checking link problems :
--- start ---
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: /home/acme/git/build/perf//python/perf.so: undefined symbol: test_attr__enabled
---- end ----
Try 'use perf' in python, checking link problems: FAILED!
#
Fix it by moving the variable to one of the linked object files and
providing a stub for the function in the python.o object, that is only
linked in the python binding.
Now 'perf test' is happy again:
# perf test 15
15: Try 'use perf' in python, checking link problems : Ok
#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-0rsca2kn44b38rgdpr3tz6n5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It just will add the O= builddir to PYTHONPATH and try to 'use perf',
which will, in verbose mode show the python backtrace with the missing
symbols, such as in the problem fixed in the patch after this one:
# perf test -v 15
15: Try 'use perf' in python, checking link problems :
--- start ---
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: /home/acme/git/build/perf//python/perf.so: undefined symbol: test_attr__enabled
---- end ----
Try 'use perf' in python, checking link problems: FAILED!
#
Loooong overdue, done.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zmd2oq9gz6t1u145ub7qm2nv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That consolidates the error messages in 'record', 'stat' and 'top', that
now get a consistent set of messages and allow other tools to use the
new method to report problems using whatever UI toolkit.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-1cudb7wl996kz7ilz83ctvhr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The only fallback right now is for HW cpu-cycles -> SW cpu-clock, that
was done in the same way in both 'top' and 'record'.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-58l1mgibh9oa9m0pd3fasxa5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of doing it in stat, top, record or any other tool that opens
event descriptors.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vr8hzph83d5t2mdlkf565h84@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now we'll see the command being run and if it fails, the fields that had
unexpected values and the expected values, example testing a problem in the
next patch:
# perf test -v 13
13: struct perf_event_attr setup :
--- start ---
SNIP
running 'PERF_TEST_ATTR=/tmp/tmpDNIE6M /home/acme/bin/perf record -o /tmp/tmpDNIE6M/perf.data --group -e cycles,instructions kill >/dev/null 2>&1' ret 0
running 'PERF_TEST_ATTR=/tmp/tmpV5lKro /home/acme/bin/perf stat -o /tmp/tmpV5lKro/perf.data -dd kill >/dev/null 2>&1' ret 1
expected config=3, got 65540
expected exclude_guest=1, got 0
FAILED '/home/acme/libexec/perf-core/tests/attr/test-stat-detailed-2' - match failure
---- end ----
struct perf_event_attr setup: FAILED!
#
While in the past we would see at the '-v' level many more messages for the
fields that matched, something we may want to see only in the '-vv' log level.
Keeping the 'running' messages so that we can see the tools tests that
succeeded so that we can compare it to the one that failed, helping pinpointing
the command line switch combo that leads to the problem.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-9avmwxv5ipxyafwqxbk52ylg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of > /tmp/krava, direct it to /dev/null.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-oo4yhij2327u8ircz4d0y5p4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As they are used from diff and event group report, add a test case to
verify their behaviors.
In this test I made a fake machine and two evsel. Each evsel got 10
samples (so hist entries) - 5 are common and the rests are not. So
after hists__match() both of them will have 5 entries with pair set.
And the second evsel has a collapsed entry so that the total number is 9
- I made it in order to simulate more realistic case. Thus after
hists__link the first entry will have 14 entries - 5 are common (w/
pair), 5 are unmatch (w/o pair) and 4 are dummy (w/ pair). And the
second entry will have 9 entries all have its pair.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1355128197-18193-5-git-send-email-namhyung@kernel.org
[ committer note: fixed up clashes with cset that moved methods to machine.h ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no reason to run hists_compute_resort() using output tree.
Convert it to use internal tree so that it can remove unnecessary
_output_resort.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1355128197-18193-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For matching and/or linking hist entries, they need to be sorted by
given sort keys. However current hists__match/link did this on the
output trees, so that the entries in the output tree need to be resort
before doing it.
This looks not so good since we have trees for collecting or collapsing
entries before passing them to an output tree and they're already sorted
by the given sort keys. Since we don't need to print anything at the
time of matching/linking, we can use these internal trees directly
instead of bothering with double resort on the output tree.
Its only user - at the time of this writing - perf diff can be easily
converted to use the internal tree and can save some lines too by
getting rid of unnecessary resorting codes.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1355128197-18193-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When comparing entries for collapsing put the given entry first, and
then the iterated entry. This is not the case of hist_entry__cmp() when
called if given sort keys don't require collapsing. So change the order
for the sake of consistency. It will be required for matching and/or
linking multiple hist entries.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1355128197-18193-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
. perf build-id cache now can show DSOs present in a perf.data file that are
not in the cache, to integrate with build-id servers being put in place by
organizations such as Fedora.
. perf buildid-list -i an-elf-file-instead-of-a-perf.data is back showing its
build-id.
. No need to do feature checks when doing a 'make tags'
. Fix some 'perf test' errors and make them use the tracepoint evsel constructor.
. perf top now shares more of the evsel config/creation routines with 'record',
paving the way for further integration like 'top' snapshots, etc.
. perf top now supports DWARF callchains.
. perf evlist decodes sample_type and read_format, helping diagnose problems.
. Fix mmap limitations on 32-bit, fix from David Miller.
. perf diff fixes from Jiri Olsa.
. Ignore ABS symbols when loading data maps, fix from Namhyung Kim
. Hists improvements from Namhyung Kim
. Don't check configuration on make clean, from Namhyung Kim
. Fix dso__fprintf() print statement, from Stephane Eranian.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=r7FE
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
. perf build-id cache now can show DSOs present in a perf.data file that are
not in the cache, to integrate with build-id servers being put in place by
organizations such as Fedora.
. perf buildid-list -i an-elf-file-instead-of-a-perf.data is back showing its
build-id.
. No need to do feature checks when doing a 'make tags'
. Fix some 'perf test' errors and make them use the tracepoint evsel constructor.
. perf top now shares more of the evsel config/creation routines with 'record',
paving the way for further integration like 'top' snapshots, etc.
. perf top now supports DWARF callchains.
. perf evlist decodes sample_type and read_format, helping diagnose problems.
. Fix mmap limitations on 32-bit, fix from David Miller.
. perf diff fixes from Jiri Olsa.
. Ignore ABS symbols when loading data maps, fix from Namhyung Kim
. Hists improvements from Namhyung Kim
. Don't check configuration on make clean, from Namhyung Kim
. Fix dso__fprintf() print statement, from Stephane Eranian.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
By popular demand, arch/aarch64 is now known as arch/arm64. However,
uname -m (and indeed the GNU triplet) still use aarch64 as the machine
string.
This patch fixes native builds of both the kernel and perf tools by
updating the relevant Makefiles to munge the output of uname -m and
set the ARCH variable appropriately.
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Use CLOEXEC flag when opening kvp_pool_x files to prevent file
descriptor leakage. Not using it was causing a problem when
SELinux was enabled.
Signed-off-by: Tomas Hozza <thozza@redhat.com>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix for the daemon code and for hv_set_ifconfig.sh script, so
that the created ifcfg-* file is consistent with initscripts
documentation.
Signed-off-by: Tomas Hozza <thozza@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's silly to create directories without execute permission, or to
give permissions to 'other' but not the group-owner.
Write the permissions in octal and 'ls -l' format since these are much
easier to read than the named macros.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Tomas Hozza <thozza@redhat.com>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Initial patch by Ben Hutchings <ben@decadent.org.uk>
We will install this in /usr, so it must use /var/lib for its state.
Only programs installed under /opt should use /var/opt.
Signed-off-by: Tomas Hozza <thozza@redhat.com>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Basically remove unneeded code. Since that 'continue' is at the end
of the for() there's no need for it.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: Davidlohr Bueso <dave@gnu.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Thanks (mostly) to uapi the package created from perf-*-src-pkg FTBFS:
| CC perf.o
|In file included from util/../perf.h:8:0,
| from util/cache.h:7,
| from perf.c:12:
|arch/x86/include/asm/unistd.h:4:29: fatal error: uapi/asm/unistd.h: No such file or directory
|
| CC perf.o
|In file included from util/../perf.h:106:0,
| from util/cache.h:7,
| from perf.c:12:
|include/linux/perf_event.h:17:35: fatal error: uapi/linux/perf_event.h: No such file or directory
|
| CC perf.o
|In file included from include/uapi/linux/perf_event.h:19:0,
| from util/../perf.h:106,
| from util/cache.h:7,
| from perf.c:12:
|util/include/asm/byteorder.h:2:49: fatal error: ../../../../include/uapi/linux/swab.h: No such file or directory
|
| CC perf.o
|In file included from util/include/../../../../include/linux/list.h:7:0,
| from util/include/linux/list.h:4,
| from util/parse-events.h:7,
| from perf.c:15:
|util/include/linux/const.h:1:50: fatal error: ../../../../include/uapi/linux/const.h: No such file or directory
|
|In file included from builtin-kvm.c:26:0:
|arch/x86/include/asm/svm.h:4:26: fatal error: uapi/asm/svm.h: No such file or directory
|
|In file included from util/evsel.c:21:0:
|include/linux/hw_breakpoint.h:5:38: fatal error: uapi/linux/hw_breakpoint.h: No such file or directory
|
| CC util/evsel.o
|In file included from util/perf_regs.h:5:0,
| from util/evsel.c:23:
|arch/x86/include/perf_regs.h:6:27: fatal error: asm/perf_regs.h: No such file or directory
|
| CC util/rbtree.o
|In file included from ../../lib/rbtree.c:24:0:
|util/include/linux/rbtree_augmented.h:2:56: fatal error: ../../../../include/linux/rbtree_augmented.h: No such file or directory
This patch adds the missing files.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1357654134-28538-1-git-send-email-bigeasy@linutronix.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The error handling in cgroup_event_listener.c did not correctly deal
with either an error opening either <control_file> or
cgroup.event_control. Due to an uninitialized variable the program
exit code was undefined if either of these opens failed.
This patch simplifies and corrects cgroup_event_listener.c error
handling by:
1. using err*() rather than printf(),exit()
2. depending on process exit to close open files
With this patch failures always return non-zero error.
Signed-off-by: Greg Thelen <gthelen@google.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Move the cgroup_event_listener.c tool from Documentation into the new
tools/cgroup directory.
This change involves wiring cgroup_event_listener.c into the tools/
make system so that is can be built with:
$ make tools/cgroup
Signed-off-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This test can be used to check wheither kernel supports IPC message queue
copy and restore features (required by CRIU project).
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Latinoware 2012.
There's a slightly non-trivial merge in virtio-net, as we cleaned up the
virtio add_buf interface while DaveM accepted the mq virtio-net patches.
You can see my solution in my pending-rebases branch, if that helps, but I
know you love merging:
https://git.kernel.org/?p=linux/kernel/git/rusty/linux.git;a=commit;h=12e4e64fa66a4c812e4855de32abdb4d819526fe
Cheers,
Rusty.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=myDR
-----END PGP SIGNATURE-----
Merge tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull virtio update from Rusty Russell:
"Some nice cleanups, and even a patch my wife did as a "live" demo for
Latinoware 2012.
There's a slightly non-trivial merge in virtio-net, as we cleaned up
the virtio add_buf interface while DaveM accepted the mq virtio-net
patches."
* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (27 commits)
virtio_console: Add support for remoteproc serial
virtio_console: Merge struct buffer_token into struct port_buffer
virtio: add drv_to_virtio to make code clearly
virtio: use dev_to_virtio wrapper in virtio
virtio-mmio: Fix irq parsing in command line parameter
virtio_console: Free buffers from out-queue upon close
virtio: Convert dev_printk(KERN_<LEVEL> to dev_<level>(
virtio_console: Use kmalloc instead of kzalloc
virtio_console: Free buffer if splice fails
virtio: tools: make it clear that virtqueue_add_buf() no longer returns > 0
virtio: scsi: make it clear that virtqueue_add_buf() no longer returns > 0
virtio: rpmsg: make it clear that virtqueue_add_buf() no longer returns > 0
virtio: net: make it clear that virtqueue_add_buf() no longer returns > 0
virtio: console: make it clear that virtqueue_add_buf() no longer returns > 0
virtio: make virtqueue_add_buf() returning 0 on success, not capacity.
virtio: console: don't rely on virtqueue_add_buf() returning capacity.
virtio_net: don't rely on virtqueue_add_buf() returning capacity.
virtio-net: remove unused skb_vnet_hdr->num_sg field
virtio-net: correct capacity math on ring full
virtio: move queue_index and num_free fields into core struct virtqueue.
...
Pull powertool update from Len Brown:
"This updates the tree w/ the latest version of turbostat, which
reports temperature and - on SNB and later - Watts."
Fix up semantic merge conflict as per Len.
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools: Allow tools to be installed in a user specified location
tools/power: turbostat: make Makefile a bit more capable
tools/power x86_energy_perf_policy: close /proc/stat in for_every_cpu()
tools/power turbostat: v3.0: monitor Watts and Temperature
tools/power turbostat: fix output buffering issue
tools/power turbostat: prevent infinite loop on migration error path
x86 power: define RAPL MSRs
tools/power/x86/turbostat: share kernel MSR #defines
I was curious why sys_kcmp wasn't working, which led me to the testcase.
It turned out I hadn't enabled CHECKPOINT_RESTORE in the kernel I was
testing. Add a decoding of errno to the testcase to make that obvious.
Signed-off-by: Dave Jones <davej@redhat.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In case breakpoint test exit non zero value it will cause make error.
Better way is just print the test failure status.
Signed-off-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In case kcmp_test exit non zero value it will cause make error.
Better way is just print the test failure status.
Signed-off-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
make run_tests need the target is run_tests instead of run-tests
Also gcc output should be kcmp_test. Fix these two issues.
Signed-off-by: Dave Young <dyoung@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Original behavior:
bash-4.1$ make -C mqueue run_tests
make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/mqueue'
./mq_open_tests /test1
Not running as root, but almost all tests require root in order to modify
system settings. Exiting.
make: *** [run_tests] Error 1
make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/mqueue'
After applying the patch:
bash-4.1$ make -C mqueue run_tests
make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/mqueue'
Not running as root, but almost all tests require root in order to modify
system settings. Exiting.
mq_open_tests: [FAIL]
Not running as root, but almost all tests require root in order to modify
system settings. Exiting.
mq_perf_tests: [FAIL]
make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/mqueue'
Signed-off-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Original behavior:
bash-4.1$ make -C vm run_tests
make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/vm'
/bin/sh ./run_vmtests
./run_vmtests: line 24: /proc/sys/vm/nr_hugepages: Permission denied
Please run this test as root
make: *** [run_tests] Error 1
make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/vm'
After applying the patch:
bash-4.1$ make -C vm run_tests
make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/vm'
./run_vmtests: line 24: /proc/sys/vm/nr_hugepages: Permission denied
Please run this test as root
vmtests: [FAIL]
make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/vm'
Signed-off-by: Dave Young <dyoung@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds