Add a i8042 filter to hp_accel to remove accelerometer's data with acpi
id HPQ6000 from keyboard bus stream. The codes sent by accelerometer are
e0 25, e0 26, e0 27 and e0 28. The relevant information is already
passed through /dev/freefall so no need to send these undocumented weird
signals through the keyboard bus. Also, unclogs `dmesg` because atkbd
complained about weird scan codes, saves processing power and disk
space.
Signed-off-by: Giedrius Statkevičius <giedriuswork@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The Yoga 3 does not contain any physical rfkill switch. Therefore
disable the rfkill switch identically to the Yoga 2 approach.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The acpi-video backlight interface on the Acer KAV80 is broken, and worse
it causes the entire machine to slow down significantly after a suspend/resume.
Blacklist it, and use the acer-wmi backlight interface instead. Note that
the KAV80 is somewhat unique in that it is the only Acer model where we
fall back to acer-wmi after blacklisting, rather then using the native
(e.g. intel) backlight driver. This is done because there is no native
backlight interface on this model.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1128309
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The acpi-video backlight interface on the NC210 does not work, blacklist it
and use the samsung-laptop interface instead.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=861573
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
X550VB as many others Asus laptops need wapf4 quirk to make RFKILL
switch be functional. Otherwise system boots with wireless card
disabled and is only possible to enable it by suspend/resume.
Bug report:
http://bugzilla.redhat.com/show_bug.cgi?id=1089731#c23
Reported-and-tested-by: Vratislav Podzimek <vpodzime@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
As bug #72551, the Toshiba TECRA A50-A series models also come with the
new keymap layout as found out by Azael Avalos, so add it to the dmi
table.
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=76971
Reported-and-tested-by: Blindekinder <rafael.raccuia@blindekinder.com>
Cc: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The kernel used to contain two functions for length-delimited,
case-insensitive string comparison, strnicmp with correct semantics and
a slightly buggy strncasecmp. The latter is the POSIX name, so strnicmp
was renamed to strncasecmp, and strnicmp made into a wrapper for the new
strncasecmp to avoid breaking existing users.
To allow the compat wrapper strnicmp to be removed at some point in the
future, and to avoid the extra indirection cost, do
s/strnicmp/strncasecmp/g.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
Cc: Darren Hart <dvhart@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
dell-wmi: Fix access out of memory
eeepc-laptop: Cleanups, refactoring, sysfs perms, and improved error handling
intel-rst: ACPI and error handling cleanups
thinkpad-acpi: Whitespace cleanup
toshiba_acpi: HCI/SCI interface update, keyboard backlight type 2 support,
new scancodes, cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUOZYVAAoJEKbMaAwKp364ai0H/1ih+WdnPD2OWRdLxFlg71i8
muVP1XVzkizEuZNXheMSgF/NMvQBkhbsl7yGf40EBlFlNro/AOQztmNzHG+ttGDs
86Y+zDlAxfLR8ro9wBRumelOhKWhctAR3dkV2xBW0T0iO76P2KUnyn2flAjbfmAT
NVQ9U4dzrUzDlTbsvkI9mXPlKYbWRbNOmoZ6L6ExNGffJjk9jPQevtvw+TmxDL7e
2Qt19kNEcCoqOT/Oe6rhL4iaCWx+b43PZBKp6krKposezxeegJeJmcA4CCWUkk+L
oz9ur3m5I6s0qCcQUtDAYhZgM3H9zlfkewYJknCrTpFj0JBks8Erh9fOco1K8rs=
=b2qK
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v3.18-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x86 platform driver updates from Darren Hart:
"The following have all spent at least a few days in linux-next, most
for more than a week. These are mostly cleanups and error handling
improvements with a few updates to extend existing support to newer
hardware.
Details:
- dell-wmi: fix access out of memory
- eeepc-laptop: cleanups, refactoring, sysfs perms, and improved
error handling
- intel-rst: ACPI and error handling cleanups
- thinkpad-acpi: whitespace cleanup
- toshiba_acpi: HCI/SCI interface update, keyboard backlight type 2
support, new scancodes, cleanups"
* tag 'platform-drivers-x86-v3.18-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (23 commits)
toshiba_acpi: Adapt kbd_bl_timeout_store to the new kbd type
toshiba_acpi: Change HCI/SCI functions return code type
toshiba_acpi: Unify return codes prefix from HCI/SCI to TOS
toshiba_acpi: Rename hci_raw to tci_raw
dell-wmi: Fix access out of memory
eeepc-laptop: clean up control flow in *_rfkill_notifier
eeepc-laptop: store_cpufv: return error if set_acpi fails
eeepc-laptop: check proper return values in get_cpufv
eeepc-laptop: make fan1_input really read-only
eeepc-laptop: pull out SENSOR_STORE_FUNC and SENSOR_SHOW_FUNC macros
eeepc-laptop: tell sysfs that the disp attribute is write-only
eeepc-laptop: pull out ACPI_STORE_FUNC and ACPI_SHOW_FUNC macros
eeepc-laptop: use DEVICE_ATTR* to instantiate device_attributes
eeepc-laptop: change sysfs function names to API expectations
eeepc-laptop: clean up coding style
eeepc-laptop: simplify parse_arg()
intel-rst: Clean up ACPI add function
intel-rst: Use ACPI_FAILURE() macro instead !ACPI_SUCCESS() for error checking
x86: thinkpad_acpi.c: fixed spacing coding style issue
toshiba_acpi: Support new keyboard backlight type
...
- Rework the handling of wakeup IRQs by the IRQ core such that
all of them will be switched over to "wakeup" mode in
suspend_device_irqs() and in that mode the first interrupt
will abort system suspend in progress or wake up the system
if already in suspend-to-idle (or equivalent) without executing
any interrupt handlers. Among other things that eliminates the
wakeup-related motivation to use the IRQF_NO_SUSPEND interrupt
flag with interrupts which don't really need it and should not
use it (Thomas Gleixner and Rafael J Wysocki).
- Switch over ACPI to handling wakeup interrupts with the help
of the new mechanism introduced by the above IRQ core rework
(Rafael J Wysocki).
- Rework the core generic PM domains code to eliminate code that's
not used, add DT support and add a generic mechanism by which
devices can be added to PM domains automatically during
enumeration (Ulf Hansson, Geert Uytterhoeven and Tomasz Figa).
- Add debugfs-based mechanics for debugging generic PM domains
(Maciej Matraszek).
- ACPICA update to upstream version 20140828. Included are updates
related to the SRAT and GTDT tables and the _PSx methods are in
the METHOD_NAME list now (Bob Moore and Hanjun Guo).
- Add _OSI("Darwin") support to the ACPI core (unfortunately, that
can't really be done in a straightforward way) to prevent
Thunderbolt from being turned off on Apple systems after boot
(or after resume from system suspend) and rework the ACPI Smart
Battery Subsystem (SBS) driver to work correctly with Apple
platforms (Matthew Garrett and Andreas Noever).
- ACPI LPSS (Low-Power Subsystem) driver update cleaning up the
code, adding support for 133MHz I2C source clock on Intel Baytrail
to it and making it avoid using UART RTS override with Auto Flow
Control (Heikki Krogerus).
- ACPI backlight updates removing the video_set_use_native_backlight
quirk which is not necessary any more, making the code check the
list of output devices returned by the _DOD method to avoid
creating acpi_video interfaces that won't work and adding a quirk
for Lenovo Ideapad Z570 (Hans de Goede, Aaron Lu and Stepan Bujnak).
- New Win8 ACPI OSI quirks for some Dell laptops (Edward Lin).
- Assorted ACPI code cleanups (Fabian Frederick, Rasmus Villemoes,
Sudip Mukherjee, Yijing Wang, and Zhang Rui).
- cpufreq core updates and cleanups (Viresh Kumar, Preeti U Murthy,
Rasmus Villemoes).
- cpufreq driver updates: cpufreq-cpu0/cpufreq-dt (driver name
change among other things), ppc-corenet, powernv (Viresh Kumar,
Preeti U Murthy, Shilpasri G Bhat, Lucas Stach).
- cpuidle support for DT-based idle states infrastructure, new
ARM64 cpuidle driver, cpuidle core cleanups (Lorenzo Pieralisi,
Rasmus Villemoes).
- ARM big.LITTLE cpuidle driver updates: support for DT-based
initialization and Exynos5800 compatible string (Lorenzo Pieralisi,
Kevin Hilman).
- Rework of the test_suspend kernel command line argument and
a new trace event for console resume (Srinivas Pandruvada,
Todd E Brandt).
- Second attempt to optimize swsusp_free() (hibernation core) to
make it avoid going through all PFNs which may be way too slow on
some systems (Joerg Roedel).
- devfreq updates (Paul Bolle, Punit Agrawal, Ãrjan Eide).
- rockchip-io Adaptive Voltage Scaling (AVS) driver and AVS
entry update in MAINTAINERS (Heiko Stübner, Kevin Hilman).
- PM core fix related to clock management (Geert Uytterhoeven).
- PM core's sysfs code cleanup (Johannes Berg).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=sIv/
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael Wysocki:
"Features-wise, to me the most important this time is a rework of
wakeup interrupts handling in the core that makes them work
consistently across all of the available sleep states, including
suspend-to-idle. Many thanks to Thomas Gleixner for his help with
this work.
Second is an update of the generic PM domains code that has been in
need of some care for quite a while. Unused code is being removed, DT
support is being added and domains are now going to be attached to
devices in bus type code in analogy with the ACPI PM domain. The
majority of work here was done by Ulf Hansson who also has been the
most active developer this time.
Apart from this we have a traditional ACPICA update, this time to
upstream version 20140828 and a few ACPI wakeup interrupts handling
patches on top of the general rework mentioned above. There also are
several cpufreq commits including renaming the cpufreq-cpu0 driver to
cpufreq-dt, as this is what implements generic DT-based cpufreq
support, and a new DT-based idle states infrastructure for cpuidle.
In addition to that, the ACPI LPSS driver is updated, ACPI support for
Apple machines is improved, a few bugs are fixed and a few cleanups
are made all over.
Finally, the Adaptive Voltage Scaling (AVS) subsystem now has a tree
maintained by Kevin Hilman that will be merged through the PM tree.
Numbers-wise, the generic PM domains update takes the lead this time
with 32 non-merge commits, second is cpufreq (15 commits) and the 3rd
place goes to the wakeup interrupts handling rework (13 commits).
Specifics:
- Rework the handling of wakeup IRQs by the IRQ core such that all of
them will be switched over to "wakeup" mode in suspend_device_irqs()
and in that mode the first interrupt will abort system suspend in
progress or wake up the system if already in suspend-to-idle (or
equivalent) without executing any interrupt handlers. Among other
things that eliminates the wakeup-related motivation to use the
IRQF_NO_SUSPEND interrupt flag with interrupts which don't really
need it and should not use it (Thomas Gleixner and Rafael Wysocki)
- Switch over ACPI to handling wakeup interrupts with the help of the
new mechanism introduced by the above IRQ core rework (Rafael Wysocki)
- Rework the core generic PM domains code to eliminate code that's
not used, add DT support and add a generic mechanism by which
devices can be added to PM domains automatically during enumeration
(Ulf Hansson, Geert Uytterhoeven and Tomasz Figa).
- Add debugfs-based mechanics for debugging generic PM domains
(Maciej Matraszek).
- ACPICA update to upstream version 20140828. Included are updates
related to the SRAT and GTDT tables and the _PSx methods are in the
METHOD_NAME list now (Bob Moore and Hanjun Guo).
- Add _OSI("Darwin") support to the ACPI core (unfortunately, that
can't really be done in a straightforward way) to prevent
Thunderbolt from being turned off on Apple systems after boot (or
after resume from system suspend) and rework the ACPI Smart Battery
Subsystem (SBS) driver to work correctly with Apple platforms
(Matthew Garrett and Andreas Noever).
- ACPI LPSS (Low-Power Subsystem) driver update cleaning up the code,
adding support for 133MHz I2C source clock on Intel Baytrail to it
and making it avoid using UART RTS override with Auto Flow Control
(Heikki Krogerus).
- ACPI backlight updates removing the video_set_use_native_backlight
quirk which is not necessary any more, making the code check the
list of output devices returned by the _DOD method to avoid
creating acpi_video interfaces that won't work and adding a quirk
for Lenovo Ideapad Z570 (Hans de Goede, Aaron Lu and Stepan Bujnak)
- New Win8 ACPI OSI quirks for some Dell laptops (Edward Lin)
- Assorted ACPI code cleanups (Fabian Frederick, Rasmus Villemoes,
Sudip Mukherjee, Yijing Wang, and Zhang Rui)
- cpufreq core updates and cleanups (Viresh Kumar, Preeti U Murthy,
Rasmus Villemoes)
- cpufreq driver updates: cpufreq-cpu0/cpufreq-dt (driver name change
among other things), ppc-corenet, powernv (Viresh Kumar, Preeti U
Murthy, Shilpasri G Bhat, Lucas Stach)
- cpuidle support for DT-based idle states infrastructure, new ARM64
cpuidle driver, cpuidle core cleanups (Lorenzo Pieralisi, Rasmus
Villemoes)
- ARM big.LITTLE cpuidle driver updates: support for DT-based
initialization and Exynos5800 compatible string (Lorenzo Pieralisi,
Kevin Hilman)
- Rework of the test_suspend kernel command line argument and a new
trace event for console resume (Srinivas Pandruvada, Todd E Brandt)
- Second attempt to optimize swsusp_free() (hibernation core) to make
it avoid going through all PFNs which may be way too slow on some
systems (Joerg Roedel)
- devfreq updates (Paul Bolle, Punit Agrawal, Ãrjan Eide).
- rockchip-io Adaptive Voltage Scaling (AVS) driver and AVS entry
update in MAINTAINERS (Heiko Stübner, Kevin Hilman)
- PM core fix related to clock management (Geert Uytterhoeven)
- PM core's sysfs code cleanup (Johannes Berg)"
* tag 'pm+acpi-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (105 commits)
ACPI / fan: printk replacement
PM / clk: Fix crash in clocks management code if !CONFIG_PM_RUNTIME
PM / Domains: Rename cpu_data to cpuidle_data
cpufreq: cpufreq-dt: fix potential double put of cpu OF node
cpufreq: cpu0: rename driver and internals to 'cpufreq_dt'
PM / hibernate: Iterate over set bits instead of PFNs in swsusp_free()
cpufreq: ppc-corenet: remove duplicate update of cpu_data
ACPI / sleep: Rework the handling of ACPI GPE wakeup from suspend-to-idle
PM / sleep: Rename platform suspend/resume functions in suspend.c
PM / sleep: Export dpm_suspend_late/noirq() and dpm_resume_early/noirq()
ACPICA: Introduce acpi_enable_all_wakeup_gpes()
ACPICA: Clear all non-wakeup GPEs in acpi_hw_enable_wakeup_gpe_block()
ACPI / video: check _DOD list when creating backlight devices
PM / Domains: Move dev_pm_domain_attach|detach() to pm_domain.h
cpufreq: Replace strnicmp with strncasecmp
cpufreq: powernv: Set the cpus to nominal frequency during reboot/kexec
cpufreq: powernv: Set the pstate of the last hotplugged out cpu in policy->cpus to minimum
cpufreq: Allow stop CPU callback to be used by all cpufreq drivers
PM / devfreq: exynos: Enable building exynos PPMU as module
PM / devfreq: Export helper functions for drivers
...
cycle:
- Increase the default ARCH_NR_GPIO from 256 to 512. This
was done to avoid having a custom <asm/gpio.h> header for
the x86 architecture - GPIO is custom and complicated
enough as it is already! We want to move to a radix to
store the descriptors going forward, and finally get rid
of this fixed array size altogether.
- Endgame patching of the gpio_remove() semantics initiated
by Abdoulaye Berthe. It is not accepted by the system that
the removal of a GPIO chip fails during e.g. reboot or
shutdown, and therefore the return value has now painfully
been refactored away. For special cases like GPIO expanders
on a hot-pluggable bus like USB, we may later add some
gpiochip_try_remove() call, but for the cases we have now,
return values are moot.
- Some incremental refactoring of the gpiolib core and ACPI
GPIO library for more descriptor usage.
- Refactor the chained IRQ handler set-up method to handle
also threaded, nested interrupts and set up the parent IRQ
correctly. Switch STMPE and TC3589x drivers to use this
registration method.
- Add a .irq_not_threaded flag to the struct gpio_chip, so
that also GPIO expanders that block but are still not
using threaded IRQ handlers.
- New drivers for the ARM64 X-Gene SoC GPIO controller.
- The syscon GPIO driver has been improved to handle the
"DSP GPIO" found on the TI Keystone 2 SoC:s.
- ADNP driver switched to use gpiolib irqchip helpers.
- Refactor the DWAPB driver to support being instantiated
from and MFD cell (platform device).
- Incremental feature improvement in the Zynq, MCP23S08,
DWAPB, OMAP, Xilinx and Crystalcove drivers.
- Various minor fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=8InA
-----END PGP SIGNATURE-----
Merge tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO changes from Linus Walleij:
"This is the bulk of GPIO changes for the v3.18 development cycle:
- Increase the default ARCH_NR_GPIO from 256 to 512. This was done
to avoid having a custom <asm/gpio.h> header for the x86
architecture - GPIO is custom and complicated enough as it is
already! We want to move to a radix to store the descriptors going
forward, and finally get rid of this fixed array size altogether.
- Endgame patching of the gpio_remove() semantics initiated by
Abdoulaye Berthe. It is not accepted by the system that the
removal of a GPIO chip fails during eg reboot or shutdown, and
therefore the return value has now painfully been refactored away.
For special cases like GPIO expanders on a hot-pluggable bus like
USB, we may later add some gpiochip_try_remove() call, but for the
cases we have now, return values are moot.
- Some incremental refactoring of the gpiolib core and ACPI GPIO
library for more descriptor usage.
- Refactor the chained IRQ handler set-up method to handle also
threaded, nested interrupts and set up the parent IRQ correctly.
Switch STMPE and TC3589x drivers to use this registration method.
- Add a .irq_not_threaded flag to the struct gpio_chip, so that also
GPIO expanders that block but are still not using threaded IRQ
handlers.
- New drivers for the ARM64 X-Gene SoC GPIO controller.
- The syscon GPIO driver has been improved to handle the "DSP GPIO"
found on the TI Keystone 2 SoC:s.
- ADNP driver switched to use gpiolib irqchip helpers.
- Refactor the DWAPB driver to support being instantiated from and
MFD cell (platform device).
- Incremental feature improvement in the Zynq, MCP23S08, DWAPB, OMAP,
Xilinx and Crystalcove drivers.
- Various minor fixes"
* tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (52 commits)
gpio: pch: Build context save/restore only for PM
pinctrl: abx500: get rid of unused variable
gpio: ks8695: fix 'else should follow close brace '}''
gpio: stmpe: add verbose debug code
gpio: stmpe: fix up interrupt enable logic
gpio: staticize xway_stp_init()
gpio: handle also nested irqchips in the chained handler set-up
gpio: set parent irq on chained handlers
gpiolib: irqchip: use irq_find_mapping while removing irqchip
gpio: crystalcove: support virtual GPIO
pinctrl: bcm281xx: make Kconfig dependency more strict
gpio: kona: enable only on BCM_MOBILE or for compile testing
gpio, bcm-kona, LLVMLinux: Remove use of __initconst
gpio: Fix ngpio in gpio-xilinx driver
gpio: dwapb: fix pointer to integer cast
gpio: xgene: Remove unneeded #ifdef CONFIG_OF guard
gpio: xgene: Remove unneeded forward declation for struct xgene_gpio
gpio: xgene: Fix missing spin_lock_init()
gpio: ks8695: fix switch case indentation
gpiolib: add irq_not_threaded flag to gpio_chip
...
With the introduction of the new keyboard backlight
implementation, the *_timeout_store function is
broken, as it only supports the first kbd_type.
This patch adapts such function for the new kbd_type,
as well as converts from using sscanf to kstrtoint.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Currently the HCI/SCI read/write functions are returning
the status of the ACPI call and also assigning the
returned value of the HCI/SCI function, however, only
the HCI/SCI status is being checked.
This patch changes such functions, returning the value
of the HCI/SCI function instead of the ACPI call status,
eliminating one parameter, and returning something
useful that indeed is being checked.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The return codes are split in between HCI/SCI prefixes,
but they are shared (used) by both interfaces, mixing
hci_read/write calls with SCI_* return codes, and
sci_read/write calls with HCI_* ones.
This patch changes the prefix of the return codes
definitions, dropping the HCI/SCI naming and instead
replacing it with TOS (for TOShiba).
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The function name hci_raw was used before to reflect
a raw (read/write) call to Toshiba's Hardware
Configuration Interface (HCI), however, since the
introduction of the System Configuration Interface
(SCI), that "name" no longer applies.
This patch changes the name of that function to
tci_raw (for Toshiba Configuration Interface), and
change the comments about it.
Also, the HCI_WORDS definition was changed to TCI_RAW,
to better reflect that we're no longer using pure HCI
calls, but a combination of HCI and SCI, which form
part of the Toshiba Configuration Interface.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Without this patch, dell-wmi is trying to access elements of dynamically
allocated array without checking the array size. This can lead to memory
corruption or a kernel panic. This patch adds the missing checks for
array size.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch fix spelling typos found in Kconfig.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Handle errors immediately in eeepc_register_rfkill_notifier and
eeepc_unregister_rfkill_notifier. This clears up the control flow for the
reader. It also removes unnecessary indentation.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The result of set_acpi is left unchecked, but it may return errors. If
one occurs, send the error to the caller. There's no reason to lie about
it, if set_acpi fails.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
In get_cpufv the return value of get_acpi is stored in the cpufv struct.
Right before this value is checked for errors, it is and'ed with 0xff.
This means c->cur can never be less than zero. Besides that, the actual
error value is ignored.
c->num is also and'ed with 0xff, which means we can ignore values below
zero.
Check the result of get_acpi() right away. While at it, propagate the
error if we got one.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
In the instantiation of the fan1_input device attribute, NULL is passed
as set function to store_sys_hwmon. The function pointer is never
checked before dereferencing it. This is fine if we can guarantee that
it will never be called with an invalid pointer, but we can't. If
someone from user space decides to change the permissions on this
attribute and write to it, kernel will crash.
Introduce EEEPC_CREATE_SENSOR_ATTR_RO() to instantiate a read-only
attribute, and declare fan1_input with it. This ensures store_sys_hwmon
is never called with NULL parameters. If someone tries to write the
attribute, the system will at least keep its sanity.
This also causes EEEPC_CREATE_SENSOR_ATTR() to be only used for R/W
attributes.This enables us to drop the _mode argument from the macro
and use DEVICE_ATTR_RW() internally while we're at it. Append _RW to the
name for readability.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Pull out EEEPC_SENSOR_STORE_FUNC and EEEPC_SENSOR_SHOW_FUNC. These
macros define functions that call store_sys_hwmon() and show_sys_hwmon()
respectively. This helps prevent duplication later on.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The disp attribute is write-only, but sysfs doesn't know this. Currently
show_sys_acpi() is mimicking sysfs behavior, if the underlying acpi call
should fail. This was introduced in 6dff29b63a "eeepc-laptop:
disp attribute should be write-only". This is not ideal; behaving like
sysfs is better left to sysfs.
Introduce EEEPC_CREATE_DEVICE_ATTR_WO() to instantiate a write-only
attribute, and declare the disp attribute with it. Sysfs makes sure
userspace can only write to disp at all times. This removes the need for
mimicking the sysfs behavior in show_sys_acpi() and store_sys_acpi(),
but we'll stick with -EIO, as changing sysfs return values should not be
taken lightly.
This change also causes EEEPC_CREATE_DEVICE_ATTR() to be used only for
R/W attributes. This enables us to drop the _mode argument from the
macro and use DEVICE_ATTR_RW() internally while we're at it. Append _RW
to the name for readability.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Pull out macros EEEPC_ACPI_STORE_FUNC and EEEPC_ACPI_SHOW_FUNC. These
macros define functions that call store_sys_acpi() and show_sys_acpi()
respectively. This helps prevent duplication later on.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Device attributes are instantiated manually, while we have DEVICE_ATTR*
macros available to do much of the work for us. Let's use them.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The eeepc-laptop driver follows the function naming convention
<action>_<attrname>(), while the sysfs macros are built around the
convention <attrname>_<action>(). Rename the sysfs functions to the
convention used by sysfs. This makes it easier to use the available API
later on.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Correct indentation and brace usage to comply with
Documentation/CodingStyle.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
this remove all reference to gpio_remove retval in all driver
except pinctrl and gpio. the same thing is done for gpio and
pinctrl in two different patches.
Signed-off-by: Abdoulaye Berthe <berthe.ab@gmail.com>
Acked-by: Michael Büsch <m@bues.ch>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
parse_arg() has three possible return values:
-EINVAL if sscanf(), in short, fails;
zero if "count" is zero; and
"count" in all other cases
But "count" will never be zero. See, parse_arg() is called by the
various store functions. And the callchain of these functions starts
with sysfs_kf_write(). And that function checks for a zero "count". So
we can stop checking for a zero "count", drop the "count" argument
entirely, and transform parse_arg() into a function that returns zero on
success or a negative error. That, in turn, allows to make those store
functions just return "count" on success. The net effect is that the
code becomes a bit easier to understand.
A nice side effect is that this GCC warning is silenced too:
drivers/platform/x86/eeepc-laptop.c: In function ‘store_sys_acpi’:
drivers/platform/x86/eeepc-laptop.c:279:10: warning: ‘value’ may be used uninitialized in this function [-Wmaybe-uninitialized]
int rv, value;
Which is, of course, the reason to have a look at parse_arg().
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
There is no need to initialize the error since it is going to be assigned
with the return status of at least on of the device_create_file() call.
We can return directly in case the first file creation fails.
All the labels for goto can be removed (along with the gotos) as well.
Tell the compiler that the failures are unlikely so it can create better
binaries.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
ACPI_SUCCESS is defined as:
#define ACPI_SUCCESS(a) (!(a))
There is no need for the the double ! since there is already a macro
defined for failures: ACPI_FAILURE()
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Fixed 22 similar coding style issues: "ERROR: spaces required around that '?'"
Signed-off-by: Jan van den Berg <janvdberg@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Newer Toshiba models now come with a new (and different) keyboard
backlight implementation with three modes of operation: TIMER,
ON and OFF, and the LED is now controlled internally by the firmware.
This patch adds support for that type of backlight, changing the
existing code to accomodate the new implementation.
The timeout value range is now 1-60 seconds, and the accepted
modes are now: 1 (FN-Z), 2 (AUTO or TIMER), 8 (ON) and 10 (OFF),
this adds two new entries kbd_type and available_kbd_modes,
the first shows the keyboard type and the latter shows the
supported modes depending on the keyboard type.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The function toshiba_touchpad_store is not checking
for invalid values and simply returns silently.
This patch checks for invalid values and returns accordingly.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Some Toshiba models with illumination support set a different
value on the returned codes, thus not allowing the illumination
LED to be registered, where it should be.
This patch removes a check from toshiba_illumination_available
function to allow such models to register the illumination LED.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Appart from reporting hotkeys, the INFO method is used
as a system wide event notifier for hardware or
software changes.
This patch adds additional "events" to the keymap list,
ignored by now, until we find them a good use.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Fujitsu backlight and hotkey devices have ACPI drivers.
The PNP MODULE_DEVICE_TABLE in fujitsu-laptop driver is just used as an
indicator for module autoloading, but this is wrong because what we
need is ACPI module device table instead, because the driver is probing
ACPI devices.
Thus remove those IDs from ACPI PNP scan handler list as we don't
have a PNP driver for them, and convert the fujitsu-laptop PNP
MODULE_DEVICE_TABLE to ACPI MODULE_DEVICE_TABLE.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=81971
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Dirk Griesbach <spamthis@freenet.de>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The current code just returns -EINVAL because mode can't be equal to
both 1 and 2.
Also this function is messy so I have cleaned it up:
1) Remove initializers like "int time = -1". Initializing variables to
garbage values turns off GCC's uninitialized variable warnings so it
can lead to bugs.
2) Use kstrtoint() instead of sscanf().
3) Use SCI_KBD_MODE_FNZ and SCI_KBD_MODE_AUTO instead of magic numbers 1
and 2.
4) Don't check for "mode == -1" because that can't happen.
5) Preserve the error code from toshiba_kbd_illum_status_set().
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
On the Toshiba Tecra Z40, after a suspend-to-disk, some FN hotkeys
driven by toshiba_acpi are not functional.
Calling the ACPI object ENAB on resume makes them back alive.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This is a follow-up patch to commit 49458e8308 ("ideapad-laptop:
Constify DMI table and other r/o variables") to do what its commit
message says. The actual commit differs from the patch posted at
https://www.mail-archive.com/platform-driver-x86@vger.kernel.org/msg05340.html
significantly, probably due to a bad merge conflict resolution. Fix up
the mess and constify the DMI table for real and fix the bogus
double-const of ideapad_rfk_data[].
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Cc: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
I've received a bug report from a user that the touchpad control part
of the ideapad-laptop ACPI interface does work for him on his
"Lenovo Yoga 2 13", and that this patch causes a regression for him.
Since it did not work for me when I had a "Lenovo Yoga 2 11" in my own
hands (loaned from a friend). It seems that this is a bit of hit and miss.
Since the result of having a false positive here is worse, then the minor
annoyance of a false touchpad disabled messages being shown after suspend /
resume on models (or is it firmware versions?) where the interface does not
work, simply revert the patch.
This reverts commit f79a901331.
Reported-by: GOESSEL Guillaume <g_goessel@outlook.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Makefile and Kconfig build support patch for the newly introduced
kernel module toshiba_haps.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This driver adds support for the built-in accelereometer found
on recent Toshiba laptops with HID TOS620A.
This driver receives ACPI notify events 0x80 when the sensor
detects a sudden move or a harsh vibration, as well as an
ACPI notify event 0x81 whenever the movement or vibration has
been stabilized.
Also provides sysfs entries to get/set the desired protection
level and reseting the HDD protection interface.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Not all HW supporting WMAX method will support the HDMI mux feature.
Explicitly quirk the HW that does support it.
Signed-off-by: Mario Limonciello <mario_limonciello@dell.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Constify the rfkill_blacklist[] DMI table, the ideapad_rfk_data[] table
and the ideapad_attribute_group attribute group. There's no need to have
them writeable during runtime.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The actual x401u does not use the so named x401u quirk but the x55u quirk.
All that the x401u quirk does it setting wapf to 4, so rename it to wapf4 to
stop the confusion.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Change the name of the hwmon interface from "compal-laptop" to "compal".
A dash is an invalid character for a hwmon name and caused the call to
hwmon_device_register_with_groups() to fail.
Signed-off-by: Roald Frederickx <roald.frederickx@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The Toshiba Qosmio X75-A series models also come with
the new keymap layout.
This patch adds this model to the alt_keymap_dmi list,
along with an extra key found on these models.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Some Toshiba models (most notably Qosmios) come with an
incomplete backlight method where the AML code doesn't
check for write or read commands and always returns
HCI_SUCCESS and the actual brightness (and in some
cases the max brightness), thus allowing the backlight
interface to be registered without write support.
This patch changes the set_lcd_brightness function,
checking the returned values for values greater than
zero to avoid registering a broken backlight interface.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
If this is going away, it won't be in 2012.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Yoga models don't offer touchpad ctrl through the ideapad interface, causing
ideapad_sync_touchpad_state to send wrong touchpad enable/disable events.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
These variables don't need to be visible outside of this compilation
unit, make them static.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Mark volume_alsa_control_vol and volume_alsa_control_mute as __initdata,
as snd_ctl_new1() will copy the relevant parts, so there is no need to
keep the master copies around after initialization.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The DMI table is only ever used during initialization. Mark it as
__initconst so its memory can be released afterwards -- roughly 1.5 kB.
In turn, the callback functions can be marked with __init, too.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
These functions are only called from other initialization routines, so
can be marked __init, too.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Constify the lis3lv02d_device_ids[] ACPI and the lis3lv02d_dmi_ids[] DMI
tables. There's no need to have them writeable during runtime.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The DMI table is already marked as __initconst, so can be the callback
functions as they're only used in that context.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Robert Gerlach <khnz@gmx.de>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The dell_quirks[] DMI table is only ever used during initialization.
Mark it as __initconst so its memory can be released afterwards --
roughly 5.7 kB. In turn, the callback function can be marked with
__init, too.
Also the touchpad_led_init() function can be marked __init as it's only
referenced from dell_init() -- an __init function.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Constify the asus_quirks[] DMI table. There's no need to have it
writeable during runtime.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Quite a lot of code and data of acer-wmi.c is only ever used during
initialization. Mark those accordingly -- and constify, where
appropriate -- so the memory can be released afterwards.
All in all those changes move ~10 kB of code and data to the .init
sections, marking them for release after initialization has finished.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Constify the asus_quirks[] DMI table. There's no need to have it
writeable during runtime.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The DMI table is only ever used during initialization. Mark it as
__initconst so its memory can be released appropriately. In turn, the
callback function can be marked with __init, too.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Encapsulate acer_suspend() and acer_resume with #ifdef CONFIG_PM_SLEEP
to get rid of the following warnings:
../acer-wmi.c:2046:12: warning: ‘acer_suspend’ defined but not used [-Wunused-function]
../acer-wmi.c:2068:12: warning: ‘acer_resume’ defined but not used [-Wunused-function]
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
sparse_keymap_setup() will make a copy of the keymap, so we can release
the master copy after initialization.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This patch removes the null test on block. block is initialized at the
beginning of the function to &wblock->gblock. Since wblock is
dereferenced prior to the null test, wblock must be a valid pointer,
and &wblock->gblock cannot be null.
The following Coccinelle script is used for detecting the change:
@r@
expression e,f;
identifier g,y;
statement S1,S2;
@@
*e = &f->g
<+...
f->y
...+>
*if (e != NULL || ...)
S1 else S2
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
As reported here: https://bugs.launchpad.net/bugs/1277959
the X550CL needs wapf=4 too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
BIOS won't light on the wifi-led after S3, so asus-wmi driver needs to
control the wifi and wifi-led status.
But, it'll lead to bt status error if asus-wmi driver controls bt as well.
So, for X200CA, asus-wmi driver controls wifi status only and have to set
wapf to 1.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Wifi will be controlled by asus-wmi driver when wapf > 0
So, controls the wifi-led when wapf > 0
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
When bl_power support got added to asus-wmi, the error handling for it was
written to ignore -ENODEV, to avoid not registering a backlight interface for
models which have no bl_power control, but do have brightness control.
At the same time the error handling for brightness_max was modified to do the
same, this is wrong, when there is no brightness_max asus-wmi should not
register a backlight interface.
Note the caller of asus_wmi_backlight_init already special cases -ENODEV,
and will not cause the wmi driver regristration to fail because of a
-ENODEV return from asus_wmi_backlight_init.
https://bugzilla.redhat.com/show_bug.cgi?id=1097436
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Some Asus motherboards for desktop PC-s export an acpi-video interface
advertising backlight support. Test the dmi chassis-type and tell acpi-video
to not register a backlight interface on desktops.
https://bugzilla.redhat.com/show_bug.cgi?id=1097436
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
It seems that the same problems which lead to adding an rfkill blacklist and
putting the Lenovo Yoga 2 11 on it are also present on the Lenovo Yoga 2 13
and Lenovo Yoga 2 Pro too:
https://bugzilla.redhat.com/show_bug.cgi?id=1021036https://forums.lenovo.com/t5/Linux-Discussion/Yoga-2-13-not-Pro-Linux-Warning/m-p/1517612
Testing has shown that the firmware rfkill settings are persistent over
reboots. So blacklisting the driver is not good enough, if the wifi is blocked
at the firmware level the wifi needs to be explictly unblocked through the
ideapad-laptop interface.
And at least on the Lenovo Yoga 2 13 the VPCCMD_RF register which on devices
with hardware kill switch reports the hardware switch state, needs to be
explictly set to 1 (radio enabled / not blocked).
So this patch does 3 things to get proper rfkill handling on these models:
1) Instead of blacklisting the rfkill functionality, which means that people
with a firmware blocked wifi get stuck in that situation, ignore the value
reported by the not present hardware rfkill switch, as this is what is causing
ideapad-laptop to wrongly report all radios as hardware blocks. But do register
the rfkill interfaces so that the user can soft [un]block them.
2) On models without a hardware rfkill switch, explictly set VPCCMD_RF to 1
3) Drop the " 11" postfix from the dmi match string, as the entire Yoga 2
series is affected.
Yoga 2 11:
Reported-and-tested-by: Vincent Gerris <vgerris@gmail.com>
Yoga 2 13:
Tested-by: madls05 <http://ubuntuforums.org/showthread.php?t=2215044>
Yoga 2 Pro:
Reported-and-tested-by: Peter F. Patel-Schneider <pfpschneider@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The new keyboard found on the *40 models is also being sold as a standalone
keyboard (with trackpoint):
http://shop.lenovo.com/us/en/itemdetails/0B47189/460/60AC6A0372B14F5BA7B12F1FF88E33C7
This uses a standard HUT code for the F12 key with the 6 square boxes on it,
which gets mapped to KEY_FILE by the kernel. Change the mapping done of
identical laptop key done by thinkpad_acpi to also send KEY_FILE for
consistency.
Cc: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The _set and _get arguments to the EEEPC_CREATE_SENSOR_ATTR() macro
are confusingly named: _set should be _get and vice versa. Rename these
arguments.
Drop the trailing semicolon from that macro, while we're at it.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
When CONFIG_FUJITSU_LAPTOP_DEBUG is disabled and W=1, the
fujitsu-laptop driver builds with the following warnings:
drivers/platform/x86/fujitsu-laptop.c: In function "bl_update_status":
drivers/platform/x86/fujitsu-laptop.c:409:8: warning: suggest braces around empty body in an "if" statement [-Wempty-body]
ret);
^
drivers/platform/x86/fujitsu-laptop.c:418:8: warning: suggest braces around empty body in an "if" statement [-Wempty-body]
ret);
^
Rework the debug printk helper macro to get rid of these. I verified
that this change has no effect on the generated binary, both in the
debug and non-debug case.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The 'asus-nb-wmi' WAPF parameter must be set to 4, so the internal Wireless LAN device is operational.
Signed-off-by: poma <pomidorabelisima@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to
meet kernel coding style guidelines. This issue was reported by checkpatch.
A simplified version of the semantic patch that makes this change is as
follows (http://coccinelle.lip6.fr/):
// <smpl>
@@
identifier i;
declarer name DEFINE_PCI_DEVICE_TABLE;
initializer z;
@@
- DEFINE_PCI_DEVICE_TABLE(i)
+ const struct pci_device_id i[]
= z;
// </smpl>
[bhelgaas: add semantic patch]
Signed-off-by: Benoit Taine <benoit.taine@lip6.fr>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Updates to the Chromebook/box platform drivers:
- A bugfix to pstore registration that makes it also work on non-Google
systems
- Addition of new shipped Chromebooks (later models have more probing
through ACPI so the need for these updates will be less over time).
- A couple of minor coding style updates
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=TuFN
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform
Pull chrome platform updates from Olof Johansson:
"Updates to the Chromebook/box platform drivers:
- a bugfix to pstore registration that makes it also work on
non-Google systems
- addition of new shipped Chromebooks (later models have more probing
through ACPI so the need for these updates will be less over time).
- A couple of minor coding style updates"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform:
platform/chrome: chromeos_laptop - Add a limit for deferred retries
platform/chrome: Add support for the acer c720p touchscreen.
platform/chrome: pstore: fix dmi table to match all chrome systems
platform/chrome: coding style fixes
platform/chrome: chromeos_laptop - Add Toshiba CB35 Touch
platform/chrome: chromeos_laptop - Add Dell Chromebook 11 touch
platform/chrome: chromeos_laptop - Add HP Chromebook 14
platform/chrome: chromeos_laptop - Add support for Acer C720
Pull input updates from Dmitry Torokhov:
- big update to Wacom driver by Benjamin Tissoires, converting it to
HID infrastructure and unifying USB and Bluetooth models
- large update to ALPS driver by Hans de Goede, which adds support for
newer touchpad models as well as cleans up and restructures the code
- more changes to Atmel MXT driver, including device tree support
- new driver for iPaq x3xxx touchscreen
- driver for serial Wacom tablets
- driver for Microchip's CAP1106
- assorted cleanups and improvements to existing drover and input core
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (93 commits)
Input: wacom - update the ABI doc according to latest changes
Input: wacom - only register once the MODULE_* macros
Input: HID - remove hid-wacom Bluetooth driver
Input: wacom - add copyright note and bump version to 2.0
Input: wacom - remove passing id for wacom_set_report
Input: wacom - check for bluetooth protocol while setting OLEDs
Input: wacom - handle Intuos 4 BT in wacom.ko
Input: wacom - handle Graphire BT tablets in wacom.ko
Input: wacom - prepare the driver to include BT devices
Input: hyperv-keyboard - register as a wakeup source
Input: imx_keypad - remove ifdef round PM methods
Input: jornada720_ts - get rid of space indentation and use tab
Input: jornada720_ts - switch to using managed resources
Input: alps - Rushmore and v7 resolution support
Input: mcs5000_ts - remove ifdef around power management methods
Input: mcs5000_ts - protect PM functions with CONFIG_PM_SLEEP
Input: ads7846 - release resources on failure for clean exit
Input: wacom - add support for 0x12C ISDv4 sensor
Input: atmel_mxt_ts - use deep sleep mode when stopped
ARM: dts: am437x-gp-evm: Update binding for touchscreen size
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTzJFGAAoJEHm+PkMAQRiGNzQH/087gQch5K+A2HKvPzjUXq57
G82DJHLONMMq8+NY3Vqhp8g2V8zRbXGJEvMJMsyuscO37Vo7ADcrYo8lqY9w5bIl
h+Zarhkqz0rqRs2SfMMIVzdd2W7MzL+lqj3GplGPxHztw0+qk7PRKILx6eRppGaH
JaD4NfkD5+1vfve/2d1ze9D5pCiw6PFNzjesKZxScQhNhIyLdRamfSTY4r9XeURo
CxpwjphEYfvAcgc39mwzEHPHyKSqULu0By6R8FXQpJ9QjVtzcGEiF+cPqGncpZOR
5ZSyU5e1CpBl9w8o6Lm9ewXmaCSnBU/VFrOwWvZrXfokZedXBOz7KdShU93XFjU=
=0VJM
-----END PGP SIGNATURE-----
Merge tag 'v3.16-rc6' into next
Merge with mainline to bring in changes to MFD to allow merging
ipaq-micro-ts driver.
The existing implementation which encodes the configuration as a binary
blob in platform data is unsatisfactory since it requires a kernel
recompile for the configuration to be changed, and it doesn't deal well
with firmware changes that move values around on the chip.
Atmel define an ASCII format for the configuration which can be exported
from their tools. This patch implements a parser for that format which
loads the configuration via the firmware loader and sends it to the MXT
chip.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
Acked-by: Yufeng Shen <miletus@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Limit the number of times we allow deferred probing to attempt to add
i2c devices. This will help with some device flakiness at probe time.
For example, some touchpads and touchscreens may be in transition between
bootloader and operational mode and may appear at neither address briefly.
Adapters, however, have no limit as it depends on when the i2c adapter driver
module is loaded. The module may even be loaded manually by the user using
modprobe or insmod.
By default, set MAX_I2C_DEVICE_DEFERALS to 5.
Based on this patch from the chromeos-kernel :
https://chromium-review.googlesource.com/168130
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Add support for the acer c720p touchscreen.
Tested manually by using the touchscreen on the acer c720p-2664
Based on the following patch by Dave Parker <dparker@chromium.org>:
https://chromium-review.googlesource.com/#/c/167136/
Signed-off-by: Michael Mullin <masmullin@gmail.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Turns out that DMI_SYSTEM_VENDOR is actually the native vendor of each
Chromebook/box. I tested the original patch on a Pixel that -- surprise,
has Google as vendor. *facepalm*.
The only other data I can think of to probe on is Google_* in the version
string. Checking with our firmware team, all systems should have this
and nothing else than Chrome hardware should have the coreboot + Google_*
combination to date.
So, we'll switch to this. For future platforms we are going to move to
using an ACPI device to configure this instead of a DMI table (yay!),
so longer-term that will sort itself out.
Signed-off-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Benson Leung <bleung@chromium.org>
added blank lines after declarations in some places
Signed-off-by: Robin Schroer <sulamiification@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Add support for Leon touch devices, which is the same as
falco/peppy/wolf on the same buses using the LynxPoint-LP I2C
via the i2c-designware-pci driver.
Based on these patches from the chromeos-3.8 kernel:
https://chromium-review.googlesource.com/168351https://chromium-review.googlesource.com/173445
Signed-off-by: Gene Chen <gene.chen@intel.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Tested-by: Scot Doyle <lkml14@scotdoyle.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Add support for Dell Chromebook 11's touch device, which is the same
as falco/peppy on the same bus using the LynxPoint-LP I2C via the
i2c-designware-pci driver.
Based on these patches from the chromeos-3.8 kernel:
https://chromium-review.googlesource.com/#/c/65320/https://chromium-review.googlesource.com/#/c/174664/
Signed-off-by: Mohammed Habibulla <moch@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Add support for the trackpad on HP Chromebook 14.
Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Acer C720 has touchpad and light sensor connected to a separate I2C buses.
Since the designware I2C host controller driver has two instances on this
particular machine we need a way to match the correct instance. Add support
for this and then register both C720 touchpad and light sensor.
This code is based on following patch from Benson Leung:
https://patchwork.kernel.org/patch/3074411/
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Since backlight core returns props.brightness in case get_brightness
is not implemented trivial implementations are not needed anymore.
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Pull x86 platform driver updates from Matthew Garrett:
"Very little of excitement here - the most significant is a new driver
for detecting device freefall on Dells, other than that it's pretty
much entirely minor fixes for specific machines"
* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86:
hp-wmi: Enable hotkeys on some systems
thinkpad_acpi: Add mappings for F9 - F12 hotkeys on X240 / T440 / T540
platform: x86: dell-smo8800: Dell Latitude freefall driver (ACPI SMO8800/SMO8810)
ideapad_laptop: Introduce the use of the managed version of kzalloc
platform/x86: Fix run-time dependencies of OLPC drivers
platform: x86: asus-wmi.c: Cleaning up uninitialized variables
ix86/mid/thermal: Introduce the use of the managed version of kzalloc
platform x86 Kconfig: Refer to the laptop list in the Compal driver help
Documentation: Add list of laptop models supported by the Compal driver
ideapad-laptop: Blacklist rfkill control on the Lenovo Yoga 2 11
asus-wmi: Set WAPF to 4 for Asus X550CA
alienware-wmi: For WMAX HDMI method, introduce a way to query HDMI cable status
alienware-wmi: Update WMAX brightness method limit to 15
pvpanic: Set high notifier priority
platform/x86: samsung-laptop: Add support for Samsung's NP7[34]0U3E models.
toshiba_acpi: Add alternative keymap support for Satellite M840
platform-drivers-x86: intel_pmic_gpio: Fix off-by-one valid offset range check
This is a third attempt to enable these buttons. The new variable being
commit 997daa1bd9 (i.e. hp-wmi: detect
"2009 BIOS or later"). Older systems that do not have the 2009 BIOS query
method respond with a dummy value, in this case 4. Using that, we can
target a fairly narrow group of systems. i.e. old enough to not have
HPWMI_FEATURE_QUERY 0xd, but new enough to have HPWMI_BIOS_QUERY 0x9.
This group may be further limited if some systems respond with something
other than 4 to non-existant feature queries.
Signed-off-by: Kyle Evans <kvans32@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The T440s user guide says that when Fn-lock is not active, the *40s' F9 - F12
keys should be mapped to: control-panel, search, show-all-windows and Computer.
These keys generate the sofar unused 28 - 31 hotkey scancodes.
For the first 2 this nicely matches the icons on the keys, for the latter 2
the icons are somewhat creative, which is why I ended up looking them up in
the user manual.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This acpi driver provide supports for freefall sensors SMO8800/SMO8810 which
can be found on Dell Latitude laptops. Driver register /dev/freefall misc
device which has same interface as driver hp_accel freefall driver. So any
existing applications for HP freefall sensor /dev/freefall will work for with
this new driver for Dell Latitude laptops too.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Cc: Sonal Santan <sonal.santan@gmail.com>
Tested-By: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-By: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This patch moves data allocated using kzalloc to managed data allocated
using devm_kzalloc and cleans now unnecessary kfrees in probe and remove
functions. The label sysfs_failed is removed as it is no longer
required. Also, linux/device.h is added to make sure the devm_*()
routine declarations are unambiguously available.
The following Coccinelle semantic patch was used for making the change:
@platform@
identifier p, probefn, removefn;
@@
struct platform_driver p = {
.probe = probefn,
.remove = removefn,
};
@prb@
identifier platform.probefn, pdev;
expression e, e1, e2;
@@
probefn(struct platform_device *pdev, ...) {
<+...
- e = kzalloc(e1, e2)
+ e = devm_kzalloc(&pdev->dev, e1, e2)
...
?-kfree(e);
...+>
}
@rem depends on prb@
identifier platform.removefn;
expression e;
@@
removefn(...) {
<...
- kfree(e);
...>
}
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Let the xo15-ebook driver depend on OLPC as all other OLPC drivers
already do. Add COMPILE_TEST as an alternative for both xo1-rfkill
and xo15-ebook, to increase the build testing coverage.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
There is a risk that the variable will be used without being initialized.
This was largely found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This patch moves data allocated using kzalloc to managed data allocated
using devm_kzalloc and cleans now unnecessary kfrees in probe and remove
functions.
The following Coccinelle semantic patch was used for making the change:
@platform@
identifier p, probefn, removefn;
@@
struct platform_driver p = {
.probe = probefn,
.remove = removefn,
};
@prb@
identifier platform.probefn, pdev;
expression e, e1, e2;
@@
probefn(struct platform_device *pdev, ...) {
<+...
- e = kzalloc(e1, e2)
+ e = devm_kzalloc(&pdev->dev, e1, e2)
...
?-kfree(e);
...+>
}
@rem depends on prb@
identifier platform.removefn;
expression e;
@@
removefn(...) {
<...
- kfree(e);
...>
}
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The Lenovo Yoga 2 11 always reports everything as blocked, causing userspace
to not even try to use the wlan / bluetooth even though they work fine.
Note this patch also removes the "else priv->rfk[i] = NULL;" bit of the
rfkill initialization, it is not necessary as the priv struct is allocated
with kzalloc.
Reported-and-tested-by: Vincent Gerris <vgerris@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The 'asus-nb-wmi' WAPF parameter must be set to 4, so the internal Wireless LAN device is operational.
Signed-off-by: Andreas Utterberg <andreas.utterberg@thundera.se>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Since there are now multiple HDMI attributes associated with the WMAX method,
create a sysfs group for them instead.
Signed-off-by: Mario Limonciello <mario_limonciello@dell.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Pull input updates from Dmitry Torokhov:
"A big update to the Atmel touchscreen driver, devm support for polled
input devices, several drivers have been converted to using managed
resources, and assorted driver fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (87 commits)
Input: synaptics - fix resolution for manually provided min/max
Input: atmel_mxt_ts - fix invalid return from mxt_get_bootloader_version
Input: max8997_haptic - add error handling for regulator and pwm
Input: elantech - don't set bit 1 of reg_10 when the no_hw_res quirk is set
Input: elantech - deal with clickpads reporting right button events
Input: edt-ft5x06 - fix an i2c write for M09 support
Input: omap-keypad - remove platform data support
ARM: OMAP2+: remove unused omap4-keypad file and code
Input: ab8500-ponkey - switch to using managed resources
Input: max8925_onkey - switch to using managed resources
Input: 88pm860x-ts - switch to using managed resources
Input: 88pm860x_onkey - switch to using managed resources
Input: intel-mid-touch - switch to using managed resources
Input: wacom - process outbound for newer Cintiqs
Input: wacom - set stylus_in_proximity when pen is in range
DTS: ARM: OMAP3-N900: Add tsc2005 support
Input: tsc2005 - add DT support
Input: add common DT binding for touchscreens
Input: jornada680_kbd - switch top using managed resources
Input: adp5520-keys - switch to using managed resources
...
This more closely reflects what the hardware can actually support.
Signed-off-by: Mario Limonciello <mario_limonciello@dell.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
We've observed the missing pvpanic call at panic, and it turned out
that this was blocked by the broken notifier of drm_fb_helper, where
scheduling may be called during switching to the fb console.
It's fairly difficult to fix the drm_fb problem and a quick fix isn't
foreseen, a simpler solution for the missing pvpanic call would be
just to call this earlier.
In order to assure that, this patch sets a higher priority to pvpanic
notifier_block. Once when the issue of drm_fb is resolved, we can
remove this priority again.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
These models have only 4 levels of keyboard backlight brightness and forget
how to work the backlight after resuming from S3 sleep. I've added a quirk
to set the appropriate number of backlight levels, and one to re-enable the
keyboard backlight on resume.
(Whitespace cleaned up by Matthew Garrett)
Signed-off-by: Scott Thrasher <scott.thrasher@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Toshiba Satellite M840 laptop has a complete different keymap although
it's bound with the same ACPI ID "TOS1900". This patch provides an
alternative keymap specific to this machine by identifying via DMI
matching. The keymap table doesn't fill all entries that were used
before since some keys aren't found on this machine at all.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=69761
Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=812209
Reported-and-tested-by: Federico Vecchiarelli <fedev@gmx.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Only pin 0-7 support input, so the valid offset range should be 0 ~ 7.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
- ACPICA update to upstream version 20140424. That includes a
number of fixes and improvements related to things like GPE
handling, table loading, headers, memory mapping and unmapping,
DSDT/SSDT overriding, and the Unload() operator. The acpidump
utility from upstream ACPICA is included too. From Bob Moore,
Lv Zheng, David Box, David Binderman, and Colin Ian King.
- Fixes and cleanups related to ACPI video and backlight interfaces
from Hans de Goede. That includes blacklist entries for some new
machines and using native backlight by default.
- ACPI device enumeration changes to create platform devices
rather than PNP devices for ACPI device objects with _HID by
default. PNP devices will still be created for the ACPI device
object with device IDs corresponding to real PNP devices, so
that change should not break things left and right, and we're
expecting to see more and more ACPI-enumerated platform devices
in the future. From Zhang Rui and Rafael J Wysocki.
- Updates for the ACPI LPSS (Low-Power Subsystem) driver allowing
it to handle system suspend/resume on Asus T100 correctly.
From Heikki Krogerus and Rafael J Wysocki.
- PM core update introducing a mechanism to allow runtime-suspended
devices to stay suspended over system suspend/resume transitions
if certain additional conditions related to coordination within
device hierarchy are met. Related PM documentation update and
ACPI PM domain support for the new feature. From Rafael J Wysocki.
- Fixes and improvements related to the "freeze" sleep state. They
affect several places including cpuidle, PM core, ACPI core, and
the ACPI battery driver. From Rafael J Wysocki and Zhang Rui.
- Miscellaneous fixes and updates of the ACPI core from Aaron Lu,
Bjørn Mork, Hanjun Guo, Lan Tianyu, and Rafael J Wysocki.
- Fixes and cleanups for the ACPI processor and ACPI PAD (Processor
Aggregator Device) drivers from Baoquan He, Manuel Schölling,
Tony Camuso, and Toshi Kani.
- System suspend/resume optimization in the ACPI battery driver from
Lan Tianyu.
- OPP (Operating Performance Points) subsystem updates from
Chander Kashyap, Mark Brown, and Nishanth Menon.
- cpufreq core fixes, updates and cleanups from Srivatsa S Bhat,
Stratos Karafotis, and Viresh Kumar.
- Updates, fixes and cleanups for the Tegra, powernow-k8, imx6q,
s5pv210, nforce2, and powernv cpufreq drivers from Brian Norris,
Jingoo Han, Paul Bolle, Philipp Zabel, Stratos Karafotis, and
Viresh Kumar.
- intel_pstate driver fixes and cleanups from Dirk Brandewie,
Doug Smythies, and Stratos Karafotis.
- Enabling the big.LITTLE cpufreq driver on arm64 from Mark Brown.
- Fix for the cpuidle menu governor from Chander Kashyap.
- New ARM clps711x cpuidle driver from Alexander Shiyan.
- Hibernate core fixes and cleanups from Chen Gang, Dan Carpenter,
Fabian Frederick, Pali Rohár, and Sebastian Capella.
- Intel RAPL (Running Average Power Limit) driver updates from
Jacob Pan.
- PNP subsystem updates from Bjorn Helgaas and Fabian Frederick.
- devfreq core updates from Chanwoo Choi and Paul Bolle.
- devfreq updates for exynos4 and exynos5 from Chanwoo Choi and
Bartlomiej Zolnierkiewicz.
- turbostat tool fix from Jean Delvare.
- cpupower tool updates from Prarit Bhargava, Ramkumar Ramachandra
and Thomas Renninger.
- New ACPI ec_access.c tool for poking at the EC in a safe way
from Thomas Renninger.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=tpdF
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm into next
Pull ACPI and power management updates from Rafael Wysocki:
"ACPICA is the leader this time (63 commits), followed by cpufreq (28
commits), devfreq (15 commits), system suspend/hibernation (12
commits), ACPI video and ACPI device enumeration (10 commits each).
We have no major new features this time, but there are a few
significant changes of how things work. The most visible one will
probably be that we are now going to create platform devices rather
than PNP devices by default for ACPI device objects with _HID. That
was long overdue and will be really necessary to be able to use the
same drivers for the same hardware blocks on ACPI and DT-based systems
going forward. We're not expecting fallout from this one (as usual),
but it's something to watch nevertheless.
The second change having a chance to be visible is that ACPI video
will now default to using native backlight rather than the ACPI
backlight interface which should generally help systems with broken
Win8 BIOSes. We're hoping that all problems with the native backlight
handling that we had previously have been addressed and we are in a
good enough shape to flip the default, but this change should be easy
enough to revert if need be.
In addition to that, the system suspend core has a new mechanism to
allow runtime-suspended devices to stay suspended throughout system
suspend/resume transitions if some extra conditions are met
(generally, they are related to coordination within device hierarchy).
However, enabling this feature requires cooperation from the bus type
layer and for now it has only been implemented for the ACPI PM domain
(used by ACPI-enumerated platform devices mostly today).
Also, the acpidump utility that was previously shipped as a separate
tool will now be provided by the upstream ACPICA along with the rest
of ACPICA code, which will allow it to be more up to date and better
supported, and we have one new cpuidle driver (ARM clps711x).
The rest is improvements related to certain specific use cases,
cleanups and fixes all over the place.
Specifics:
- ACPICA update to upstream version 20140424. That includes a number
of fixes and improvements related to things like GPE handling,
table loading, headers, memory mapping and unmapping, DSDT/SSDT
overriding, and the Unload() operator. The acpidump utility from
upstream ACPICA is included too. From Bob Moore, Lv Zheng, David
Box, David Binderman, and Colin Ian King.
- Fixes and cleanups related to ACPI video and backlight interfaces
from Hans de Goede. That includes blacklist entries for some new
machines and using native backlight by default.
- ACPI device enumeration changes to create platform devices rather
than PNP devices for ACPI device objects with _HID by default. PNP
devices will still be created for the ACPI device object with
device IDs corresponding to real PNP devices, so that change should
not break things left and right, and we're expecting to see more
and more ACPI-enumerated platform devices in the future. From
Zhang Rui and Rafael J Wysocki.
- Updates for the ACPI LPSS (Low-Power Subsystem) driver allowing it
to handle system suspend/resume on Asus T100 correctly. From
Heikki Krogerus and Rafael J Wysocki.
- PM core update introducing a mechanism to allow runtime-suspended
devices to stay suspended over system suspend/resume transitions if
certain additional conditions related to coordination within device
hierarchy are met. Related PM documentation update and ACPI PM
domain support for the new feature. From Rafael J Wysocki.
- Fixes and improvements related to the "freeze" sleep state. They
affect several places including cpuidle, PM core, ACPI core, and
the ACPI battery driver. From Rafael J Wysocki and Zhang Rui.
- Miscellaneous fixes and updates of the ACPI core from Aaron Lu,
Bjørn Mork, Hanjun Guo, Lan Tianyu, and Rafael J Wysocki.
- Fixes and cleanups for the ACPI processor and ACPI PAD (Processor
Aggregator Device) drivers from Baoquan He, Manuel Schölling, Tony
Camuso, and Toshi Kani.
- System suspend/resume optimization in the ACPI battery driver from
Lan Tianyu.
- OPP (Operating Performance Points) subsystem updates from Chander
Kashyap, Mark Brown, and Nishanth Menon.
- cpufreq core fixes, updates and cleanups from Srivatsa S Bhat,
Stratos Karafotis, and Viresh Kumar.
- Updates, fixes and cleanups for the Tegra, powernow-k8, imx6q,
s5pv210, nforce2, and powernv cpufreq drivers from Brian Norris,
Jingoo Han, Paul Bolle, Philipp Zabel, Stratos Karafotis, and
Viresh Kumar.
- intel_pstate driver fixes and cleanups from Dirk Brandewie, Doug
Smythies, and Stratos Karafotis.
- Enabling the big.LITTLE cpufreq driver on arm64 from Mark Brown.
- Fix for the cpuidle menu governor from Chander Kashyap.
- New ARM clps711x cpuidle driver from Alexander Shiyan.
- Hibernate core fixes and cleanups from Chen Gang, Dan Carpenter,
Fabian Frederick, Pali Rohár, and Sebastian Capella.
- Intel RAPL (Running Average Power Limit) driver updates from Jacob
Pan.
- PNP subsystem updates from Bjorn Helgaas and Fabian Frederick.
- devfreq core updates from Chanwoo Choi and Paul Bolle.
- devfreq updates for exynos4 and exynos5 from Chanwoo Choi and
Bartlomiej Zolnierkiewicz.
- turbostat tool fix from Jean Delvare.
- cpupower tool updates from Prarit Bhargava, Ramkumar Ramachandra
and Thomas Renninger.
- New ACPI ec_access.c tool for poking at the EC in a safe way from
Thomas Renninger"
* tag 'pm+acpi-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (187 commits)
ACPICA: Namespace: Remove _PRP method support.
intel_pstate: Improve initial busy calculation
intel_pstate: add sample time scaling
intel_pstate: Correct rounding in busy calculation
intel_pstate: Remove C0 tracking
PM / hibernate: fixed typo in comment
ACPI: Fix x86 regression related to early mapping size limitation
ACPICA: Tables: Add mechanism to control early table checksum verification.
ACPI / scan: use platform bus type by default for _HID enumeration
ACPI / scan: always register ACPI LPSS scan handler
ACPI / scan: always register memory hotplug scan handler
ACPI / scan: always register container scan handler
ACPI / scan: Change the meaning of missing .attach() in scan handlers
ACPI / scan: introduce platform_id device PNP type flag
ACPI / scan: drop unsupported serial IDs from PNP ACPI scan handler ID list
ACPI / scan: drop IDs that do not comply with the ACPI PNP ID rule
ACPI / PNP: use device ID list for PNPACPI device enumeration
ACPI / scan: .match() callback for ACPI scan handlers
ACPI / battery: wakeup the system only when necessary
power_supply: allow power supply devices registered w/o wakeup source
...
Here is the big staging driver pull request for 3.16-rc1.
Lots of stuff here, tons of cleanup patches, a few new drivers, and some
removed as well, but I think we are still adding a few thousand more
lines than we remove, due to the new drivers being bigger than the ones
deleted.
One notible bit of work did stand out, Jes Sorensen has gone on a tear,
fixing up a wireless driver to be "more sane" than it originally was
from the vendor, with over 500 patches merged here. Good stuff, and a
number of users laptops are better off for it.
All of this has been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iEYEABECAAYFAlONXKQACgkQMUfUDdst+ynIwgCgq5pPIn+2aewaFK8rrN18xqls
F3YAoNDYeqMpQepvRe50HcjRrgDvsV2n
=VenO
-----END PGP SIGNATURE-----
Merge tag 'staging-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging into next
Pull staging driver updates from Greg KH:
"Here is the big staging driver pull request for 3.16-rc1.
Lots of stuff here, tons of cleanup patches, a few new drivers, and
some removed as well, but I think we are still adding a few thousand
more lines than we remove, due to the new drivers being bigger than
the ones deleted.
One notible bit of work did stand out, Jes Sorensen has gone on a
tear, fixing up a wireless driver to be "more sane" than it originally
was from the vendor, with over 500 patches merged here. Good stuff,
and a number of users laptops are better off for it.
All of this has been in linux-next for a while"
* tag 'staging-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1703 commits)
staging: skein: fix sparse warning for static declarations
staging/mt29f_spinand: coding style fixes
staging: silicom: fix sparse warning for static variable
staging: lustre: Fix coding style
staging: android: binder.c: Use more appropriate functions for euid retrieval
staging: lustre: fix integer as NULL pointer warnings
Revert "staging: dgap: remove unneeded kfree() in dgap_tty_register_ports()"
Staging: rtl8192u: r8192U_wx.c Fixed a misplaced brace
staging: ion: shrink highmem pages on kswapd
staging: ion: use compound pages on high order pages for system heap
staging: ion: remove struct ion_page_pool_item
staging: ion: simplify ion_page_pool_total()
staging: ion: tidy up a bit
staging: rtl8723au: Remove redundant casting in usb_ops_linux.c
staging: rtl8723au: Remove redundant casting in rtl8723a_hal_init.c
staging: rtl8723au: Remove redundant casting in rtw_xmit.c
staging: rtl8723au: Remove redundant casting in rtw_wlan_util.c
staging: rtl8723au: Remove redundant casting in rtw_sta_mgt.c
staging: rtl8723au: Remove redundant casting in rtw_recv.c
staging: rtl8723au: Remove redundant casting in rtw_mlme.c
...
pci_bus_add_device() always returns 0, so there's no point in returning
anything at all. Make it a void function and remove the tests of the
return value from the callers.
[bhelgaas: changelog, remove unused "err" from i82875p_setup_overfl_dev()]
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
By reading the touchscreen configuration from the settings that the
maXTouch chip is actually using, we can remove some platform data.
The matrix size is not used for anything, and results in some rather
confusing code to re-read it because it may change when configuration
is downloaded, so don't print it out.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
Acked-by: Yufeng Shen <miletus@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The Aspire 5741 has broken acpi-video backlight control, so add it to the
quirk table.
References: https://bugzilla.redhat.com/show_bug.cgi?id=1012674
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Switch from acpi_video_unregister(), to acpi_video_unregister_backlight(),
so that the hotkeys handler registered by acpi-video stays in place.
Since there are no mappings for the atkbd raw codes for the brightness
keys used by newer Acer models in /lib/udev/hwdb.d/60-keyboard.hwdb, and
since we map the wmi events with a code of KE_IGNORE, we rely on acpi-video
to do the hotkey handling for us.
For laptops such as the Acer Aspire 5750 which uses intel gfx this works
despite us calling acpi_video_unregister() because the following happens:
1) acpi-video module gets loaded (as it is a dependency of acer-wmi and i915)
2) acpi-video does NOT call acpi_video_register()
3) acer-wmi loads (assume it loads before i915), calls
acpi_video_dmi_promote_vendor(); which sets
ACPI_VIDEO_BACKLIGHT_DMI_VENDOR
4) calls acpi_video_unregister -> not registered, nop
5) i915 loads, calls acpi_video_register
6) acpi_video_register registers the acpi_notifier for the hotkeys,
does NOT register a backlight device because of
ACPI_VIDEO_BACKLIGHT_DMI_VENDOR
But on the Acer Aspire 5750G, which uses nvidia graphics the following happens:
1) acpi-video module gets loaded (as it is a dependency of acer-wmi)
2) acpi-video calls acpi_video_register()
3) acpi_video_register registers the acpi_notifier for the hotkeys,
and a backlight device
4) acer-wmi loads, calls acpi_video_dmi_promote_vendor()
5) calls acpi_video_unregister, this unregisters BOTH the acpi_notifier for
the hotkeys AND the backlight device
And we end up without any handler for the brightness hotkeys. This patch fixes
this by switching over to acpi_video_unregister_backlight() which keeps the
hotkey handler in place.
References: https://bugzilla.kernel.org/show_bug.cgi?id=35622
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* The mapping of the GPIO numbers into the T19 status byte varies between
different maXTouch chips. Some have up to 7 GPIOs. Allowing a keycode array
of up to 8 items is simpler and more generic. So replace #define with
configurable number of keys which also allows the removal of is_tp.
* Rename platform data parameters to include "t19" to prevent confusion with
T15 key array.
* Probe aborts early on when pdata is NULL, so no need to check.
* Move "int i" to beginning of function (mixed declarations and code)
* Use API calls rather than __set_bit()
* Remove unused dev variable.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Yufeng Shen <miletus@chromium.org>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
It is not necessary to download these values to the maXTouch chip on every
probe, since they are stored in NVRAM. It makes life difficult when tuning
the device to keep them in sync with the config array/file, and requires a
new kernel build for minor tweaks.
These parameters only represent a tiny subset of the available
configuration options, tracking all of these options in platform data would
be a endless task. In addition, different versions of maXTouch chips may
have these values in different places or may not even have them at all.
Having these values also makes life more complex for device tree and other
platforms where having to define a static configuration isn't helpful.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
Acked-by: Yufeng Shen <miletus@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
drivers/platform/goldfish/goldfish_pipe.c: In function 'goldfish_cmd_status':
drivers/platform/goldfish/goldfish_pipe.c:164:14: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
writel((u32)(u64)pipe, dev->base + PIPE_REG_CHANNEL);
^
drivers/platform/goldfish/goldfish_pipe.c: In function 'goldfish_cmd':
drivers/platform/goldfish/goldfish_pipe.c:180:14: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
writel((u32)(u64)pipe, dev->base + PIPE_REG_CHANNEL);
^
drivers/platform/goldfish/goldfish_pipe.c: In function 'goldfish_pipe_read_write':
drivers/platform/goldfish/goldfish_pipe.c:337:16: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
writel((u32)(u64)pipe, dev->base + PIPE_REG_CHANNEL);
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Jun Tian <jun.j.tian@intel.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/platform/goldfish/pdev_bus.c: In function 'goldfish_new_pdev':
drivers/platform/goldfish/pdev_bus.c:136:14: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
writel((u32)(u64)name, pdev_bus_base + PDEV_BUS_GET_NAME);
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Jun Tian <jun.j.tian@intel.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the 64bit helper method to scrub most of the ifdefs from the driver. The
pipe reading has a funny case we can't scrub completely.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patchs adds a new register to pass the upper 32bits for the
device name address when running in 64bit mode.
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Jun Tian <jun.j.tian@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When using multiple adb on 64 bit kernel to transfer data,
the goldfish pipe interrupt will crash the kernel.
Signed-off-by: Jun Tian <jun.j.tian@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Support 64-bit channel and address for the goldfish pipe driver.
Signed-off-by: Jun Tian <jun.j.tian@intel.com>
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Brian Wood <brian.j.wood@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a bug fix that has been lurking in the Google tree but not pushed
upstream.
From: Octavian Purdila <octavian.purdila@intel.com>
The memory region is already reserved in goldfish_init() during
platform init.
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Jun Tian <jun.j.tian@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Intel test builder caught a few instances that should test if kzalloc failed to
allocate memory as well as a scenario that platform_driver wasn't properly
initialized.
Signed-off-by: Mario Limonciello <mario_limonciello@dell.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The button mappings for the Fujitsu Lifebook T901 and T902 are quite different
from the generic Lifebook T mappings that are defined. This patch adds
mappings that are specific to the hardware on these machines, and allows
users to take advantage of features like screen rotation.
Signed-off-by: Scott K Logan <logans@cottsay.net>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
... so that one can know what this option is about without opening the
long help text.
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The only real change is passing in event_mask to the formerly nested functions.
Otherwise it's just moving around function and macro code.
This is the only place in the Linux kernel where nested functions are still in
use. Nested functions aren't part of the C standards, and complicate the
generated code. Although the Linux Kernel has never set out to be entirely C
standard compliant, it is increasingly compliant to the standard which is
supported by other compilers such as Clang. The LLVMLinux project is working on
being able to compile the Linux kernel with Clang. The use of nested functions
blocks this effort.
Signed-off-by: Behan Webster <behanw@converseincode.com>
Signed-off-by: Jan-Simon Möller <dl9pf@gmx.de>
CC: David Woodhouse <David.Woodhouse@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
CC: ibm-acpi-devel@lists.sourceforge.net
CC: platform-driver-x86@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Dan Aloni has submitted a patch to set adaptive mode to function mode
when system resume back. Thanks Dan. :)
Following patch can make it to be restored to previous mode like What
Windows does.
Thanks,
Shuduo
>From 0ca960138518ceab23110141a0d7c0cafd54a859 Mon Sep 17 00:00:00 2001
From: Shuduo Sang <shuduo.sang@canonical.com>
Date: Thu, 27 Mar 2014 17:51:24 +0800
Subject: [PATCH] save and restore adaptive keyboard mode for suspend and
resume
The mode of adaptive keyboard on X1 Carbon need be saved first before
suspend then it can be restored after resume. Otherwise it will be
unusable.
Signed-off-by: Bruce Ma <bruce.ma@canonical.com>
Signed-off-by: Shuduo Sang <shuduo.sang@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Submit patch V4 to support Adaptive Keyboard on Thinkpad X1 Carbon 2nd
generation according to Tobias's comments.
Thanks,
Shuduo
>From b153a7b14791c6e01892c0e274e23eefd625fb8d Mon Sep 17 00:00:00 2001
From: Shuduo Sang <shuduo.sang@canonical.com>
Date: Mon, 3 Mar 2014 14:29:32 +0800
Subject: [PATCH] support thinkpad X1 Carbon's adaptive keyboard
Thinkpad X1 Carbon's adaptive keyboard has five modes including Home
mode, Web browser mode, Web conference mode, Function mode and Lay-flat
mode. We support Home mode and Function mode currently.
Signed-off-by: Bruce Ma <bruce.ma@canonical.com>
Signed-off-by: Shuduo Sang <shuduo.sang@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Given that some new features were added to the
driver, bump its version to 0.20 and add myself
to the copyright list for these new features
that were added.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Recent Toshiba laptops now come equiped with a built in
accelerometer (TOS620A) device, but such device does not
expose the axes information, however, HCI calls 0x006d
and 0x00a6 can be used to query such info.
This patch adds support to read the axes values by
exposing them through the _position_ sysfs file.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Newer Toshiba laptops now come with a feature called
ECO Mode, where the system is put in low power consupmtion
state and a green (world shaped with leaves) icon illuminates
indicating that the system is in such power state.
This patch adds support to turn on/off the ECO led by
creating and registering the toshiba::eco_mode led.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Toshiba laptops have two ways of letting userspace
know the touchpad has changed state, one with a
button on top of the touchpad that simply emmits
scancodes whenever enabled/disabled, and another one
by pressing Fn-F9 (touchpad toggle) hotkey.
This patch adds support to enable/disable the touchpad
by exposing the _touchpad_ file in sysfs that simply
makes a call to a SCI register, imitating what
Toshiba provided software does on Windows.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Toshiba laptops equiped with an illuminated keyboard
can operate in two different modes: Auto and FN-Z.
The Auto mode turns on the led on keystrokes and
automatically turns it off after some (configurable)
time the last key was pressed.
The FN-Z mode is used to toggle the keyboard led on/off
by userspace.
This patch adds support to set the desired KBD mode and
timeout via sysfs, creates and registers toshiba::kbd_backlight
led device whenever the mode is set to FN-Z.
The acceptable values for mode are: 1 (Auto) and 2 (Fn-Z)
The time values range are: 1-60 seconds
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Change the toshiba_illumination_* code to use the
newly introduced SCI functions, making the code
more robust in detecting Illumination capabilities
properly, since it was only opening the SCI and
the return value was never checked for errors or
actual Illumination support.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
SCI stands for System Configuration Interface,
which aim is to conceal differences in hardware
between different models.
This patch introduces four new calls: sci_open,
sci_close, sci_read and sci_write, along with
its definitions and return codes which will be
used by later patches.
More information about the SCI can be found at
Jonathan Buzzard's website [1].
[1] http://www.buzzard.me.uk/toshiba/docs.html
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The mute LED states have to be restored after resume.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70351
Cc: <stable@vger.kernel.org> [v3.13+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This reverts commit 997ab407d2. This driver is
replaced by the more general SOC IOSF driver in commit 4618441536.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The current value is not available through the SNC device and therefore
the attribute is writable only.
Signed-off-by: Javier Achirica <jachirica@gmail.com>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Keyboard backlight can be always off, use some automatic trigger
(activity and light sensor), always on.
The behaviour of the driver changes whereby previously when passed 1 it
tried to turn on backlight immediately now it does nothing. This is
however a bug fix since (a) it makes little sense to turn on the
backlight when control is automatic and (b) this behaviour is
consistent with what the windows driver does.
Signed-off-by: Javier Achirica <jachirica@gmail.com>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Allows to specify if the USB socket should charge attached devices while
the laptop is suspended to ram.
Signed-off-by: Javier Achirica <jachirica@gmail.com>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Vaio Pro uses a different handle and doesn't support all the options as
other models (only S5 setting v/s S3/4/5).
Minor code rework to generalize functions by Mattia Dongili.
Signed-off-by: Javier Achirica <jachirica@gmail.com>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Hi all,
my panasonic cf-51 does no longer react to the suspend and hibernate
keys. I cannot tell when this started since I no longer use the machine
on a daily basis, but I suspect it started when userspace switched from
using /proc/acpi/event to the input layer, wich was quite some time ago ;-)
Today I investigated the issue and found that the firmware simply does
not generate any event on "key down" for those keys, but only on "key up".
The attached patch works around the problem.
Best regards,
Stefan
--
Stefan Seyfried
Linux Consultant & Developer -- GPG Key: 0x731B665B
B1 Systems GmbH
Osterfeldstraße 7 / 85088 Vohburg / http://www.b1-systems.de
GF: Ralph Dehner / Unternehmenssitz: Vohburg / AG: Ingolstadt,HRB 3537
>From 7c96fee748cfd3e64732a7ac142f5dea07d7379f Mon Sep 17 00:00:00 2001
From: Stefan Seyfried <seife+kernel@b1-systems.com>
Date: Sun, 2 Mar 2014 17:50:01 +0100
Subject: [PATCH] panasonic-laptop: fix sleep keys on CF-51
At least on my CF-51, both sleep and hibernate keys do not
generate "key down" events, only "key up". Because of this,
the input layer does ignore both keys. The work around is
to generate a key down event before the key up. To avoid
double events on non-broken firmware, this is only done if
no key down is ever seen for those keys.
Signed-off-by: Stefan Seyfried <seife+kernel@b1-systems.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
There have been lots of changes in ALSA core, HD-audio and ASoC, also
most of PCI drivers touched by conversions of printks. All these
resulted in a high volume and wide ranged patch sets in this release.
Many changes are fairly trivial, but also lots of nice cleanups and
refactors. There are a few new drivers, most notably, the Intel
Haswell and Baytrail ASoC driver.
Core changes:
- A bit modernization; embed the device struct into snd_card struct,
so that it may be referred from the beginning. A new snd_card_new()
function is introduced for that, and all drivers have been
converted.
- Simplification in the device management code in ALSA core;
now managed by a simple priority list instead
- Converted many kernel messages to use the standard dev_err() & co;
this would be the pretty visible difference, especially for
HD-audio.
HD-audio:
- Conexant codecs use the auto-parser as default now;
the old static code still remains in case of regressions.
Some old quirks have been rewritten with the fixups for auto-parser.
- C-Media codecs also use the auto-parser as default now, too.
- A device struct is assigned to each HD-audio codec, and the formerly
hwdep attributes are accessible over the codec sysfs, too.
hwdep attributes still remain for compatibility.
- Split the PCI-specific stuff for HD-audio controller into a separate
module, ane make a helper module for the generic controller driver.
This is a preliminary change for supporting Tegra HDMI controller in
near future, which slipped from 3.15 merge.
- Device-specific fixes: mute LED support for Lenovo Ideapad,
mic LED fix for HP laptops, more ASUS subwoofer quirks, yet more
Dell laptop headset quirks
- Make the HD-audio codec response a bit more robust
- A few improvements on Realtek ALC282 / 283 about the pop noises
- A couple of Intel HDMI fixes
ASoC:
- Lots of cleanups for enumerations; refactored lots of error prone
original codes to use more modern APIs
- Elimination of the ASoC level wrappers for I2C and SPI moving us
closer to converting to regmap completely and avoiding some
randconfig hassle
- Provide both manually and transparently locked DAPM APIs rather than
a mix of the two fixing some concurrency issues
- Start converting CODEC drivers to use separate bus interface drivers
rather than having them all in one file helping avoid dependency
issues
- DPCM support for Intel Haswell and Bay Trail platforms, lots of
fixes
- Lots of work on improvements for simple-card, DaVinci and the Renesas
rcar drivers.
- New drivers for Analog Devices ADAU1977, TI PCM512x and parts of the
CSR SiRF SoC, TLV320AIC31XXX, Armada 370 DB, Cirrus cs42xx8
- Fixes for the simple-card DAI format DT mess
- DT support for a couple more devices.
- Use of the tdm_slot mapping in a few drivers
Others:
- Support of reset_resume callback for improved S4 in USB-audio driver;
the device with boot quirks have been little tested, which we need
to watch out in this development cycle
- Add PM support for ICE1712 driver (finally!);
it's still pretty partial support, only for M-Audio devices
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=Y476
-----END PGP SIGNATURE-----
Merge tag 'sound-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"There have been lots of changes in ALSA core, HD-audio and ASoC, also
most of PCI drivers touched by conversions of printks. All these
resulted in a high volume and wide ranged patch sets in this release.
Many changes are fairly trivial, but also lots of nice cleanups and
refactors. There are a few new drivers, most notably, the Intel
Haswell and Baytrail ASoC driver.
Core changes:
- A bit modernization; embed the device struct into snd_card struct,
so that it may be referred from the beginning. A new
snd_card_new() function is introduced for that, and all drivers
have been converted.
- Simplification in the device management code in ALSA core; now
managed by a simple priority list instead
- Converted many kernel messages to use the standard dev_err() & co;
this would be the pretty visible difference, especially for
HD-audio.
HD-audio:
- Conexant codecs use the auto-parser as default now; the old static
code still remains in case of regressions. Some old quirks have
been rewritten with the fixups for auto-parser.
- C-Media codecs also use the auto-parser as default now, too.
- A device struct is assigned to each HD-audio codec, and the
formerly hwdep attributes are accessible over the codec sysfs, too.
hwdep attributes still remain for compatibility.
- Split the PCI-specific stuff for HD-audio controller into a
separate module, ane make a helper module for the generic
controller driver. This is a preliminary change for supporting
Tegra HDMI controller in near future, which slipped from 3.15
merge.
- Device-specific fixes: mute LED support for Lenovo Ideapad, mic LED
fix for HP laptops, more ASUS subwoofer quirks, yet more Dell
laptop headset quirks
- Make the HD-audio codec response a bit more robust
- A few improvements on Realtek ALC282 / 283 about the pop noises
- A couple of Intel HDMI fixes
ASoC:
- Lots of cleanups for enumerations; refactored lots of error prone
original codes to use more modern APIs
- Elimination of the ASoC level wrappers for I2C and SPI moving us
closer to converting to regmap completely and avoiding some
randconfig hassle
- Provide both manually and transparently locked DAPM APIs rather
than a mix of the two fixing some concurrency issues
- Start converting CODEC drivers to use separate bus interface
drivers rather than having them all in one file helping avoid
dependency issues
- DPCM support for Intel Haswell and Bay Trail platforms, lots of
fixes
- Lots of work on improvements for simple-card, DaVinci and the
Renesas rcar drivers.
- New drivers for Analog Devices ADAU1977, TI PCM512x and parts of
the CSR SiRF SoC, TLV320AIC31XXX, Armada 370 DB, Cirrus cs42xx8
- Fixes for the simple-card DAI format DT mess
- DT support for a couple more devices.
- Use of the tdm_slot mapping in a few drivers
Others:
- Support of reset_resume callback for improved S4 in USB-audio
driver; the device with boot quirks have been little tested, which
we need to watch out in this development cycle
- Add PM support for ICE1712 driver (finally!); it's still pretty
partial support, only for M-Audio devices"
* tag 'sound-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (610 commits)
ALSA: ice1712: Add suspend support for M-Audio ICE1712-based cards
ALSA: ice1712: add suspend support for ICE1712 chip
ALSA: hda - Enable beep for ASUS 1015E
ALSA: asihpi: fix some indenting in snd_card_asihpi_pcm_new()
ALSA: hda - add headset mic detect quirks for three Dell laptops
ASoC: tegra: move AC97 clock handling to the machine driver
ASoC: simple-card: Handle many DAI links
ASoC: simple-card: Add DT documentation for multi-DAI links
ASoC: simple-card: dynamically allocate the DAI link and properties
ASoC: imx-ssi: Add .xlate_tdm_slot_mask() support.
ASoC: fsl-esai: Add .xlate_tdm_slot_mask() support.
ASoC: fsl-utils: Add fsl_asoc_xlate_tdm_slot_mask() support.
ASoC: core: remove the 'of_' prefix of of_xlate_tdm_slot_mask.
ASoC: rcar: subnode tidyup for renesas,rsnd.txt
ASoC: Remove name_prefix unset during DAI link init hack
ALSA: hda - Inform the unexpectedly ignored pins by auto-parser
ASoC: rcar: bugfix: it cares about the non-src case
ARM: bockw: fixup SND_SOC_DAIFMT_CBx_CFx flags
ASoC: pcm: Drop incorrect double/extra frees
ASoC: mfld_machine: Fix compile error
...
The fujitsu-laptop driver includes <linux/video_output.h> but doesn't
call any of its functions. Drop the unneeded include to avoid
unnecessary driver rebuilds.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI_VIDEO no longer depends on VIDEO_OUTPUT_CONTROL, so drivers which
want to select ACPI_VIDEO no longer have to select
VIDEO_OUTPUT_CONTROL.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* Use deferred probing on Chrome OS platforms for the i2c
device registration. This fixes a long-standing race of initialization
of touchpad/screen on Chromebooks.
* Added in platform device registration for pstore console on supported hardware
* Misc smaller fixes (__initdata, module exit cleanup, etc)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=nO2m
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform
Pull chrome platform cleanups and improvements from Olof Johansson:
- Use deferred probing on Chrome OS platforms for the i2c device
registration. This fixes a long-standing race of initialization of
touchpad/screen on Chromebooks.
- Added in platform device registration for pstore console on supported
hardware
- Misc smaller fixes (__initdata, module exit cleanup, etc)
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform:
platform/chrome: unregister platform driver/device when module exit
platform/chrome: Make i2c_adapter_names static
platform/chrome: chromeos_laptop - fix incorrect placement of __initdata tag
platform/chrome: chromeos_laptop - Use deferred probing
platform/chrome: chromeos_laptop - Restructure device associations
platform/chrome: Add pstore platform_device
Pull x86 platform drivers update from Matthew Garrett:
"Nothing amazingly special here. Some cleanups, a new driver to
support a single button on some new HPs, a tiny amount of hardware
enablement"
* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86:
ipc: add intel-mid's pci id macros
hp-wireless: new driver for hp wireless button for Windows 8
toshiba_acpi: Support RFKILL hotkey scancode
hp_accel: Add a new PnP ID HPQ6007 for new HP laptops
sony-laptop: remove unnecessary assigment of len
fujitsu-laptop: fix error return code
dell-laptop: Only install the i8042 filter when rfkill is active
X86 platform: New BayTrail IOSF-SB MBI driver
drivers: platform: Include appropriate header file in mxm-wmi.c
drivers: platform: Mark functions as static in hp_accel.c
dell-laptop: rkill whitelist Precision models
ipc: simplify platform data approach
asus-wmi: Convert to use devm_hwmon_device_register_with_groups
compal-laptop: Use devm_hwmon_device_register_with_groups
compal-laptop: Replace SENSOR_DEVICE_ATTR with DEVICE_ATTR
eeepc-laptop: Convert to use devm_hwmon_device_register_with_groups
compal-laptop: Use devm_kzalloc to allocate local data structure
dell-laptop: fix to return error code in dell_send_intensity()
- ACPI core changes to make it create a struct acpi_device object for every
device represented in the ACPI tables during all namespace scans regardless
of the current status of that device. In accordance with this, ACPI hotplug
operations will not delete those objects, unless the underlying ACPI tables
go away.
- On top of the above, new sysfs attribute for ACPI device objects allowing
user space to check device status by triggering the execution of _STA for
its ACPI object. From Srinivas Pandruvada.
- ACPI core hotplug changes reducing code duplication, integrating the
PCI root hotplug with the core and reworking container hotplug.
- ACPI core simplifications making it use ACPI_COMPANION() in the code
"glueing" ACPI device objects to "physical" devices.
- ACPICA update to upstream version 20131218. This adds support for the
DBG2 and PCCT tables to ACPICA, fixes some bugs and improves debug
facilities. From Bob Moore, Lv Zheng and Betty Dall.
- Init code change to carry out the early ACPI initialization earlier.
That should allow us to use ACPI during the timekeeping initialization
and possibly to simplify the EFI initialization too. From Chun-Yi Lee.
- Clenups of the inclusions of ACPI headers in many places all over from
Lv Zheng and Rashika Kheria (work in progress).
- New helper for ACPI _DSM execution and rework of the code in drivers
that uses _DSM to execute it via the new helper. From Jiang Liu.
- New Win8 OSI blacklist entries from Takashi Iwai.
- Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun Guo,
Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava, Rashika Kheria,
Tang Chen, Zhang Rui.
- intel_pstate driver updates, including proper Baytrail support, from
Dirk Brandewie and intel_pstate documentation from Ramkumar Ramachandra.
- Generic CPU boost ("turbo") support for cpufreq from Lukasz Majewski.
- powernow-k6 cpufreq driver fixes from Mikulas Patocka.
- cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark Brown.
- Assorted cpufreq drivers fixes and cleanups from Anson Huang, John Tobias,
Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh Kumar.
- cpuidle cleanups from Bartlomiej Zolnierkiewicz.
- Support for hibernation APM events from Bin Shi.
- Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC disabled
during thaw transitions from Bjørn Mork.
- PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf Hansson.
- PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente Kurusa,
Rashika Kheria.
- New tool for profiling system suspend from Todd E Brandt and a cpupower
tool cleanup from One Thousand Gnomes.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=dRf6
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael Wysocki:
"As far as the number of commits goes, the top spot belongs to ACPI
this time with cpufreq in the second position and a handful of PM
core, PNP and cpuidle updates. They are fixes and cleanups mostly, as
usual, with a couple of new features in the mix.
The most visible change is probably that we will create struct
acpi_device objects (visible in sysfs) for all devices represented in
the ACPI tables regardless of their status and there will be a new
sysfs attribute under those objects allowing user space to check that
status via _STA.
Consequently, ACPI device eject or generally hot-removal will not
delete those objects, unless the table containing the corresponding
namespace nodes is unloaded, which is extremely rare. Also ACPI
container hotplug will be handled quite a bit differently and cpufreq
will support CPU boost ("turbo") generically and not only in the
acpi-cpufreq driver.
Specifics:
- ACPI core changes to make it create a struct acpi_device object for
every device represented in the ACPI tables during all namespace
scans regardless of the current status of that device. In
accordance with this, ACPI hotplug operations will not delete those
objects, unless the underlying ACPI tables go away.
- On top of the above, new sysfs attribute for ACPI device objects
allowing user space to check device status by triggering the
execution of _STA for its ACPI object. From Srinivas Pandruvada.
- ACPI core hotplug changes reducing code duplication, integrating
the PCI root hotplug with the core and reworking container hotplug.
- ACPI core simplifications making it use ACPI_COMPANION() in the
code "glueing" ACPI device objects to "physical" devices.
- ACPICA update to upstream version 20131218. This adds support for
the DBG2 and PCCT tables to ACPICA, fixes some bugs and improves
debug facilities. From Bob Moore, Lv Zheng and Betty Dall.
- Init code change to carry out the early ACPI initialization
earlier. That should allow us to use ACPI during the timekeeping
initialization and possibly to simplify the EFI initialization too.
From Chun-Yi Lee.
- Clenups of the inclusions of ACPI headers in many places all over
from Lv Zheng and Rashika Kheria (work in progress).
- New helper for ACPI _DSM execution and rework of the code in
drivers that uses _DSM to execute it via the new helper. From
Jiang Liu.
- New Win8 OSI blacklist entries from Takashi Iwai.
- Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun
Guo, Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava,
Rashika Kheria, Tang Chen, Zhang Rui.
- intel_pstate driver updates, including proper Baytrail support,
from Dirk Brandewie and intel_pstate documentation from Ramkumar
Ramachandra.
- Generic CPU boost ("turbo") support for cpufreq from Lukasz
Majewski.
- powernow-k6 cpufreq driver fixes from Mikulas Patocka.
- cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark
Brown.
- Assorted cpufreq drivers fixes and cleanups from Anson Huang, John
Tobias, Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh
Kumar.
- cpuidle cleanups from Bartlomiej Zolnierkiewicz.
- Support for hibernation APM events from Bin Shi.
- Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC
disabled during thaw transitions from Bjørn Mork.
- PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf
Hansson.
- PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente
Kurusa, Rashika Kheria.
- New tool for profiling system suspend from Todd E Brandt and a
cpupower tool cleanup from One Thousand Gnomes"
* tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (153 commits)
thermal: exynos: boost: Automatic enable/disable of BOOST feature (at Exynos4412)
cpufreq: exynos4x12: Change L0 driver data to CPUFREQ_BOOST_FREQ
Documentation: cpufreq / boost: Update BOOST documentation
cpufreq: exynos: Extend Exynos cpufreq driver to support boost
cpufreq / boost: Kconfig: Support for software-managed BOOST
acpi-cpufreq: Adjust the code to use the common boost attribute
cpufreq: Add boost frequency support in core
intel_pstate: Add trace point to report internal state.
cpufreq: introduce cpufreq_generic_get() routine
ARM: SA1100: Create dummy clk_get_rate() to avoid build failures
cpufreq: stats: create sysfs entries when cpufreq_stats is a module
cpufreq: stats: free table and remove sysfs entry in a single routine
cpufreq: stats: remove hotplug notifiers
cpufreq: stats: handle cpufreq_unregister_driver() and suspend/resume properly
cpufreq: speedstep: remove unused speedstep_get_state
platform: introduce OF style 'modalias' support for platform bus
PM / tools: new tool for suspend/resume performance optimization
ACPI: fix module autoloading for ACPI enumerated devices
ACPI: add module autoloading support for ACPI enumerated devices
ACPI: fix create_modalias() return value handling
...
For readability matters, this patch replaces the hardcoded pci ids by
human readable macros.
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This scancode is used in new 2013 models like Satellite P75-A7200.
Signed-off-by: Unai Uribarri <unaiur@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The DriveGuard chips on the new HP laptops are with a new PnP ID
"HPQ6007". It should be compatible with older chips.
Acked-by: Éric Piel <eric.piel@tremplin-utc.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The assignment of len = len is unnecessary, so remove it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
These functions mix the use of result and error. In acpi_fujitsu_add,
result does not seem useful; it would seem reasonable to propagate the
return value of acpi_bus_update_power in an error case. On the other hand,
in the case of acpi_fujitsu_hotkey_add, there is an initialization of
result that can lead to what looks like a failure case, but that does not
abort the function. The variable result is kept for this case.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
{ ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
when != &ret
*if(...)
{
... when != ret = e2
when forall
return ret;
}
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Installing the i8042 filter is not useful on machines where rfkill is not
whitelisted, so move the filter installation into dell_setup_rfkill,
after the whitelist check.
This avoids doing a needless and potentially troublesome rfkill query
(dell_send_request(buf, 17, 11)) when the wireless Fn key gets pressed on
non whitelisted laptops.
This patch was written as a result of:
https://bugzilla.redhat.com/show_bug.cgi?id=1045807
It is not yet clear if this is related, but it is a good idea to not register
the i8042 filter in general.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Current Intel SOC cores use a MailBox Interface (MBI) to provide access to unit
devices connected to the system fabric. This driver implements access to this
interface on BayTrail platforms. This is a requirement for drivers that need
access to unit registers on the platform (e.g. accessing the PUNIT for power
management features such as RAPL). Serialized access is handled by all exported
routines with spinlocks.
The API includes 3 functions for access to unit registers:
int bt_mbi_read(u8 port, u8 opcode, u32 offset, u32 *mdr)
int bt_mbi_write(u8 port, u8 opcode, u32 offset, u32 mdr)
int bt_mbi_modify(u8 port, u8 opcode, u32 offset, u32 mdr, u32 mask)
port: indicating the unit being accessed
opcode: the read or write port specific opcode
offset: the register offset within the port
mdr: the register data to be read, written, or modified
mask: bit locations in mdr to change
Returns nonzero on error
Note: GPU code handles access to the GFX unit. Therefore access to that unit
with this driver is disallowed to avoid conflicts.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This patch includes appropriate header file linux/mxm-wmi.h in
x86/mxm-wmi.c because functions mxm_wmi_call_mxds(), mxm_wmi_call_mxmx()
and mxm_wmi_supported() have their prototype declaration in
linux/mxm-wmi.h.
Thus, it also eliminates the following warnings in x86/mxm-wmi.c:
drivers/platform/x86/mxm-wmi.c:43:5: warning: no previous prototype for ‘mxm_wmi_call_mxds’ [-Wmissing-prototypes]
drivers/platform/x86/mxm-wmi.c:68:5: warning: no previous prototype for ‘mxm_wmi_call_mxmx’ [-Wmissing-prototypes]
drivers/platform/x86/mxm-wmi.c:93:6: warning: no previous prototype for ‘mxm_wmi_supported’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This patch marks the functions lis3lv02d_acpi_init(),
lis3lv02d_acpi_read() and lis3lv02d_acpi_write() as static in
x86/hp_accel.c because they are not used outside this file.
Thus, it also eliminates the following warnings in x86/hp_accel.c:
drivers/platform/x86/hp_accel.c:91:5: warning: no previous prototype for ‘lis3lv02d_acpi_init’ [-Wmissing-prototypes]
drivers/platform/x86/hp_accel.c:109:5: warning: no previous prototype for ‘lis3lv02d_acpi_read’ [-Wmissing-prototypes]
drivers/platform/x86/hp_accel.c:132:5: warning: no previous prototype for ‘lis3lv02d_acpi_write’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Given that Precision mobile workstations are top of the line Dell products,
I expect the functionality of rfkill there to be as reliable as on Latitudes
so whitelist Precisions.
https://bugzilla.kernel.org/show_bug.cgi?id=65731
Reported-by: Calum Lind <calumlind@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This patch removes the unnecessary enum for platform type to handle the
array of pdatas. We can set pdata directly to pci_device_id struct
instead.
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Simplify the code and avoid race conditions due to late sysfs attribute
registration. Also replace SENSOR_DEVICE_ATTR with DEVICE_ATTR;
the additional parameter is not used and thus unnecessary.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Simplify the code and create hwmon attributes as well as hwmon device in one go.
With the new hwmon API, hwmon attributes are now attached to the hwmon device.
Therefore, split hwmon and device attributes into two separate groups.
Platform attributes are still attached to the platform device.
Also use devm_kzalloc to allocate local data structures for further
simplification.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The extra argument to SENSOR_DEVICE_ATTR is not used. It is therefore not
necessary to use SENSOR_DEVICE_ATTR in the first place. Replace it with
DEVICE_ATTR.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Simplify the code and avoid race condition caused by creating sysfs attributes
after creating the hwmon device.
Also replace SENSOR_DEVICE_ATTR with DEVICE_ATTR since the extra argument
is not used and SENSOR_DEVICE_ATTR is not needed.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Fix to return error code instead always return 0 from function
dell_send_intensity().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Multiple race conditions are possible between the rfkill hotplug in the
asus-wmi and eeepc-laptop drivers and the generic PCI bus rescan and device
removal that can be triggered via sysfs.
To avoid those race conditions make asus-wmi and eeepc-laptop use global
PCI rescan-remove locking around the rfkill hotplug.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* acpi-cleanup: (22 commits)
ACPI / tables: Return proper error codes from acpi_table_parse() and fix comment.
ACPI / tables: Check if id is NULL in acpi_table_parse()
ACPI / proc: Include appropriate header file in proc.c
ACPI / EC: Remove unused functions and add prototype declaration in internal.h
ACPI / dock: Include appropriate header file in dock.c
ACPI / PCI: Include appropriate header file in pci_link.c
ACPI / PCI: Include appropriate header file in pci_slot.c
ACPI / EC: Mark the function acpi_ec_add_debugfs() as static in ec_sys.c
ACPI / NVS: Include appropriate header file in nvs.c
ACPI / OSL: Mark the function acpi_table_checksum() as static
ACPI / processor: initialize a variable to silence compiler warning
ACPI / processor: use ACPI_COMPANION() to get ACPI device
ACPI: correct minor typos
ACPI / sleep: Drop redundant acpi_disabled check
ACPI / dock: Drop redundant acpi_disabled check
ACPI / table: Replace '1' with specific error return values
ACPI: remove trailing whitespace
ACPI / IBFT: Fix incorrect <acpi/acpi.h> inclusion in iSCSI boot firmware module
ACPI / i915: Fix incorrect <acpi/acpi.h> inclusions via <linux/acpi_io.h>
SFI / ACPI: Fix warnings reported during builds with W=1
...
Conflicts:
drivers/acpi/nvs.c
drivers/hwmon/asus_atk0110.c
Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and
<acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h>
inclusions and remove some inclusions of those files that aren't
necessary.
First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>
should not be included directly from any files that are built for
CONFIG_ACPI unset, because that generally leads to build warnings about
undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set,
<linux/acpi.h> includes those files and for CONFIG_ACPI unset it
provides stub ACPI symbols to be used in that case.
Second, there are ordering dependencies between those files that always
have to be met. Namely, it is required that <acpi/acpi_bus.h> be included
prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the
latter depends on are always there. And <acpi/acpi.h> which provides
basic ACPICA type declarations should always be included prior to any other
ACPI headers in CONFIG_ACPI builds. That also is taken care of including
<linux/acpi.h> as appropriate.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff)
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We have registered platform driver and device when module
init, and need unregister them when module exit.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Olof Johansson <olof@lixom.net>
Follow-up to commit 294d31e822 ("sony-laptop: don't change keyboard
backlight settings"): avoid messing up the state on resume. Leave it to
what was before suspending as it's anyway likely that we still don't
know what value we should write to the EC registers. This fix is also
required in 3.12
Cc: stable@vger.kernel.org
Tested-by: Karol Babioch <karol@babioch.de>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Not used outside of the file, so declaration should be static. Picked up by
sparse:
drivers/platform/chrome/chromeos_laptop.c:44:12: warning: symbol
'i2c_adapter_names' was not declared. Should it be static?
Signed-off-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Benson Leung <bleung@chromium.org>
__initdata tag should be placed between the variable name and equal
sign for the variable to be placed in the intended .init.data section.
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Further refactor chromeos_laptop, adding a probe function.
Init will call dmi_check_system, but will only use the match to select
a chromeos_laptop structure of the current board.
Probe will add the devices, and on errors return -EPROBE_DEFER.
If i2c adapters are loaded after chromeos_laptop inits, the deferred
probe will instantiate the peripherals when the bus appears.
Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
The previous code had a single DMI matching entry
for each device on a board. Instead provide a single
DMI entry for each board which references a structure
about each board that lists the associated peripherals.
This allows for a lower number of DMI matching sequences
as well making it easier to add new boards.
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
I just fixed this same bug in arch/powerpc/kernel/vio.c and took a quick
look for other similar errors in the kernel.
modalias_show() should return an empty string on error, not errno.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This patch adds support for ipc command interrupt mode.
Also added platform data option to select 'irq_mode'
irq_mode = 1: configure the driver to receive IOC interrupt
for each successful ipc_command.
irq_mode = 0: makes driver use polling method to
track the command completion status.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Handle error conditions in intel_scu_ipc_command() and
pwr_reg_rdwr().
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Since the same ipc driver can be used by many platforms, using
macros for defining ipc_base and i2c_base addresses is not
a scalable approach. So added a platform data structure to pass
this information.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Cc: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
SNDRV_CARDS can be specified via Kconfig since 3.11 kernel, so this
can be over 32bit integer range, which leads to a build error.
Cc: <stable@vger.kernel.org> [v3.11+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
It makes sense to split out the Chromebook/Chromebox hardware platform
drivers to a separate subdirectory, since some of it will be shared
between ARM and x86.
This moves over the existing chromeos_laptop driver without making
any other changes, and adds appropriate Kconfig entries for the new
directory. It also adds a MAINTAINERS entry for the new subdir.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Some HP BIOS has dummy WMI 0x05 cmd and it causes wireless set cmd to fail.
This patch fixes the problem by detecting "2009 BIOS or later" flag which
determines whether WMI 0x1b is supported and is used to replace WMI 0x05.
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Emitting an OOM message isn't necessary after input_allocate_device
as there's a generic OOM and a dump_stack already done.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Some BIOS versions/Vaio models apparently ship with two nearly identical
functions to handle backlight related controls.
The only difference seems to be:
If (LEqual (BUF1, 0x40))
{
Store (0x40, P80H)
Store (BUF2, Local0)
- And (Local0, One, Local0)
+ And (Local0, 0x03, Local0)
Store (Local0, ^^H_EC.KLPC)
}
Avoid erroring out on initialization and messing things up on cleanup
for now since we never call into these methods with anything different
than 1 or 0.
This issue was found on a Sony VPCSE1V9E/BIOS R2087H4.
Cc: Marco Krüger <krgsch@gmail.com>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
All my testing has been on laptops with a hw killswitch, so to be on the
safe side disable rfkill functionality on models without a hw killswitch for
now. Once we gather some feedback on laptops without a hw killswitch this
decision maybe reconsidered.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Setting force_rfkill will cause the dell-laptop rfkill code to skip its
whitelist checks, this will allow individual users to override the whitelist,
as well as to gather info from users to improve the checks.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Some time is needed for the BIOS to do its work, but 250ms should be plenty.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Instead when hw-blocked always write 1 to the blocked bit for the radio in
question. This is necessary to properly set all the blocked bits for hw-switch
controlled radios to 1 after power-on and resume.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This is necessary for 3 reasons:
1) To apply sw_state changes made while hw-blocked
2) To set all the blocked bits for hw-switch controlled radios to 1 when the
switch gets changed to off, this is necessary on some models to actually
turn the radio status LEDs off.
3) On some models non hw-switch controlled radios will have their block bit
cleared (potentially undoing a soft-block) on hw-switch toggle, this
restores the sw-block in this case.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This makes dell-laptop's rfkill code consistent with other drivers which
allow sw_state changes while hw blocked.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
On machines with a hardware switch, the blocking settings can not be changed
through a Fn + wireless-key combo, so there is no reason to read back the
blocking state from the BIOS.
Reading back is not only not necessary it is actually harmful, since on some
machines the blocking state will be cleared to all 0 after a wireless switch
toggle, even for radios not controlled by the hw-switch (yeah firmware bugs).
This causes "magic" changes to the sw_state. This is inconsistent with other
rfkill drivers which preserve the sw_state over a hw kill on / off.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The query callback should only update the hw_state, see the comment in
net/rfkill/core.c in rfkill_set_block, which is its only caller.
rfkill_set_block will modify the sw_state directly after calling query so
calling set_sw_state is an expensive NOP.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
To ensure we don't enter any hw-switch related code paths on machines without
a hw-switch.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The rfkill functionality was removed from the dell-laptop driver because it
was causing problems on various non Latitude models, and the blacklist kept
growing and growing. In the thread discussing this Dell mentioned that they
only QA the rfkill acpi interface on Latitudes and indeed there have been
no blacklist entries for Latitudes.
Note that the blacklist contained no Vostros either, and most Vostros have
a hardware switch too, so we could consider supporting Vostros with a
hardware switch too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Without rfkill functionality in dell-laptop I have the following problems:
-If the hardware radio switch is set to disable the radio, then userspace
will still think it can use wireless and bluetooth.
-The wwan / 3g modem cannot be soft blocked without the dell-laptop rfkill
functionality
I know the rfkill functionality was removed from the dell-laptop driver because
it caused more problems then it fixed, and the blacklist for it was growing out
of control.
But in the thread discussing this Dell mentioned that they only QA the rfkill
acpi interface on Latitudes and indeed there have been no blacklist entries
for Latitudes. Therefor I would like to bring the rfkill functionality back
only for Latitudes. This patch is a straight-forward revert. The next patch
in this set will drop the blacklist and replace it with a Latitude check.
This reverts commit a6c2390cd6.
Conflicts:
drivers/platform/x86/dell-laptop.c
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
- ACPI-based device hotplug fixes for issues introduced recently and
a fix for an older error code path bug in the ACPI PCI host bridge
driver.
- Fix for recently broken OMAP cpufreq build from Viresh Kumar.
- Fix for a recent hibernation regression related to s2disk.
- Fix for a locking-related regression in the ACPI EC driver from
Puneet Kumar.
- System suspend error code path fix related to runtime PM and
runtime PM documentation update from Ulf Hansson.
- cpufreq's conservative governor fix from Xiaoguang Chen.
- New processor IDs for intel_idle and turbostat and removal of
an obsolete Kconfig option from Len Brown.
- New device IDs for the ACPI LPSS (Low-Power Subsystem) driver and
ACPI-based PCI hotplug (ACPIPHP) cleanup from Mika Westerberg.
- Removal of several ACPI video DMI blacklist entries that are not
necessary any more from Aaron Lu.
- Rework of the ACPI companion representation in struct device and
code cleanup related to that change from Rafael J Wysocki,
Lan Tianyu and Jarkko Nikula.
- Fixes for assigning names to ACPI-enumerated I2C and SPI devices
from Jarkko Nikula.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=QMp+
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI and power management updates from Rafael Wysocki:
- ACPI-based device hotplug fixes for issues introduced recently and a
fix for an older error code path bug in the ACPI PCI host bridge
driver
- Fix for recently broken OMAP cpufreq build from Viresh Kumar
- Fix for a recent hibernation regression related to s2disk
- Fix for a locking-related regression in the ACPI EC driver from
Puneet Kumar
- System suspend error code path fix related to runtime PM and runtime
PM documentation update from Ulf Hansson
- cpufreq's conservative governor fix from Xiaoguang Chen
- New processor IDs for intel_idle and turbostat and removal of an
obsolete Kconfig option from Len Brown
- New device IDs for the ACPI LPSS (Low-Power Subsystem) driver and
ACPI-based PCI hotplug (ACPIPHP) cleanup from Mika Westerberg
- Removal of several ACPI video DMI blacklist entries that are not
necessary any more from Aaron Lu
- Rework of the ACPI companion representation in struct device and code
cleanup related to that change from Rafael J Wysocki, Lan Tianyu and
Jarkko Nikula
- Fixes for assigning names to ACPI-enumerated I2C and SPI devices from
Jarkko Nikula
* tag 'pm+acpi-2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits)
PCI / hotplug / ACPI: Drop unused acpiphp_debug declaration
ACPI / scan: Set flags.match_driver in acpi_bus_scan_fixed()
ACPI / PCI root: Clear driver_data before failing enumeration
ACPI / hotplug: Fix PCI host bridge hot removal
ACPI / hotplug: Fix acpi_bus_get_device() return value check
cpufreq: governor: Remove fossil comment in the cpufreq_governor_dbs()
ACPI / video: clean up DMI table for initial black screen problem
ACPI / EC: Ensure lock is acquired before accessing ec struct members
PM / Hibernate: Do not crash kernel in free_basic_memory_bitmaps()
ACPI / AC: Remove struct acpi_device pointer from struct acpi_ac
spi: Use stable dev_name for ACPI enumerated SPI slaves
i2c: Use stable dev_name for ACPI enumerated I2C slaves
ACPI: Provide acpi_dev_name accessor for struct acpi_device device name
ACPI / bind: Use (put|get)_device() on ACPI device objects too
ACPI: Eliminate the DEVICE_ACPI_HANDLE() macro
ACPI / driver core: Store an ACPI device pointer in struct acpi_dev_node
cpufreq: OMAP: Fix compilation error 'r & ret undeclared'
PM / Runtime: Fix error path for prepare
PM / Runtime: Update documentation around probe|remove|suspend
cpufreq: conservative: set requested_freq to policy max when it is over policy max
...
Use this new function to make code more comprehensible, since we are
reinitialzing the completion, not initializing.
[akpm@linux-foundation.org: linux-next resyncs]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since DEVICE_ACPI_HANDLE() is now literally identical to
ACPI_HANDLE(), replace it with the latter everywhere and drop its
definition from include/acpi.h.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- New power capping framework and the the Intel Running Average Power
Limit (RAPL) driver using it from Srinivas Pandruvada and Jacob Pan.
- Addition of the in-kernel switching feature to the arm_big_little
cpufreq driver from Viresh Kumar and Nicolas Pitre.
- cpufreq support for iMac G5 from Aaro Koskinen.
- Baytrail processors support for intel_pstate from Dirk Brandewie.
- cpufreq support for Midway/ECX-2000 from Mark Langsdorf.
- ARM vexpress/TC2 cpufreq support from Sudeep KarkadaNagesha.
- ACPI power management support for the I2C and SPI bus types from
Mika Westerberg and Lv Zheng.
- cpufreq core fixes and cleanups from Viresh Kumar, Srivatsa S Bhat,
Stratos Karafotis, Xiaoguang Chen, Lan Tianyu.
- cpufreq drivers updates (mostly fixes and cleanups) from Viresh Kumar,
Aaro Koskinen, Jungseok Lee, Sudeep KarkadaNagesha, Lukasz Majewski,
Manish Badarkhe, Hans-Christian Egtvedt, Evgeny Kapaev.
- intel_pstate updates from Dirk Brandewie and Adrian Huang.
- ACPICA update to version 20130927 includig fixes and cleanups and
some reduction of divergences between the ACPICA code in the kernel
and ACPICA upstream in order to improve the automatic ACPICA patch
generation process. From Bob Moore, Lv Zheng, Tomasz Nowicki,
Naresh Bhat, Bjorn Helgaas, David E Box.
- ACPI IPMI driver fixes and cleanups from Lv Zheng.
- ACPI hotplug fixes and cleanups from Bjorn Helgaas, Toshi Kani,
Zhang Yanfei, Rafael J Wysocki.
- Conversion of the ACPI AC driver to the platform bus type and
multiple driver fixes and cleanups related to ACPI from Zhang Rui.
- ACPI processor driver fixes and cleanups from Hanjun Guo, Jiang Liu,
Bartlomiej Zolnierkiewicz, Mathieu Rhéaume, Rafael J Wysocki.
- Fixes and cleanups and new blacklist entries related to the ACPI
video support from Aaron Lu, Felipe Contreras, Lennart Poettering,
Kirill Tkhai.
- cpuidle core cleanups from Viresh Kumar and Lorenzo Pieralisi.
- cpuidle drivers fixes and cleanups from Daniel Lezcano, Jingoo Han,
Bartlomiej Zolnierkiewicz, Prarit Bhargava.
- devfreq updates from Sachin Kamat, Dan Carpenter, Manish Badarkhe.
- Operation Performance Points (OPP) core updates from Nishanth Menon.
- Runtime power management core fix from Rafael J Wysocki and update
from Ulf Hansson.
- Hibernation fixes from Aaron Lu and Rafael J Wysocki.
- Device suspend/resume lockup detection mechanism from Benoit Goby.
- Removal of unused proc directories created for various ACPI drivers
from Lan Tianyu.
- ACPI LPSS driver fix and new device IDs for the ACPI platform scan
handler from Heikki Krogerus and Jarkko Nikula.
- New ACPI _OSI blacklist entry for Toshiba NB100 from Levente Kurusa.
- Assorted fixes and cleanups related to ACPI from Andy Shevchenko,
Al Stone, Bartlomiej Zolnierkiewicz, Colin Ian King, Dan Carpenter,
Felipe Contreras, Jianguo Wu, Lan Tianyu, Yinghai Lu, Mathias Krause,
Liu Chuansheng.
- Assorted PM fixes and cleanups from Andy Shevchenko, Thierry Reding,
Jean-Christophe Plagniol-Villard.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=JCxk
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael J Wysocki:
- New power capping framework and the the Intel Running Average Power
Limit (RAPL) driver using it from Srinivas Pandruvada and Jacob Pan.
- Addition of the in-kernel switching feature to the arm_big_little
cpufreq driver from Viresh Kumar and Nicolas Pitre.
- cpufreq support for iMac G5 from Aaro Koskinen.
- Baytrail processors support for intel_pstate from Dirk Brandewie.
- cpufreq support for Midway/ECX-2000 from Mark Langsdorf.
- ARM vexpress/TC2 cpufreq support from Sudeep KarkadaNagesha.
- ACPI power management support for the I2C and SPI bus types from Mika
Westerberg and Lv Zheng.
- cpufreq core fixes and cleanups from Viresh Kumar, Srivatsa S Bhat,
Stratos Karafotis, Xiaoguang Chen, Lan Tianyu.
- cpufreq drivers updates (mostly fixes and cleanups) from Viresh
Kumar, Aaro Koskinen, Jungseok Lee, Sudeep KarkadaNagesha, Lukasz
Majewski, Manish Badarkhe, Hans-Christian Egtvedt, Evgeny Kapaev.
- intel_pstate updates from Dirk Brandewie and Adrian Huang.
- ACPICA update to version 20130927 includig fixes and cleanups and
some reduction of divergences between the ACPICA code in the kernel
and ACPICA upstream in order to improve the automatic ACPICA patch
generation process. From Bob Moore, Lv Zheng, Tomasz Nowicki, Naresh
Bhat, Bjorn Helgaas, David E Box.
- ACPI IPMI driver fixes and cleanups from Lv Zheng.
- ACPI hotplug fixes and cleanups from Bjorn Helgaas, Toshi Kani, Zhang
Yanfei, Rafael J Wysocki.
- Conversion of the ACPI AC driver to the platform bus type and
multiple driver fixes and cleanups related to ACPI from Zhang Rui.
- ACPI processor driver fixes and cleanups from Hanjun Guo, Jiang Liu,
Bartlomiej Zolnierkiewicz, Mathieu Rhéaume, Rafael J Wysocki.
- Fixes and cleanups and new blacklist entries related to the ACPI
video support from Aaron Lu, Felipe Contreras, Lennart Poettering,
Kirill Tkhai.
- cpuidle core cleanups from Viresh Kumar and Lorenzo Pieralisi.
- cpuidle drivers fixes and cleanups from Daniel Lezcano, Jingoo Han,
Bartlomiej Zolnierkiewicz, Prarit Bhargava.
- devfreq updates from Sachin Kamat, Dan Carpenter, Manish Badarkhe.
- Operation Performance Points (OPP) core updates from Nishanth Menon.
- Runtime power management core fix from Rafael J Wysocki and update
from Ulf Hansson.
- Hibernation fixes from Aaron Lu and Rafael J Wysocki.
- Device suspend/resume lockup detection mechanism from Benoit Goby.
- Removal of unused proc directories created for various ACPI drivers
from Lan Tianyu.
- ACPI LPSS driver fix and new device IDs for the ACPI platform scan
handler from Heikki Krogerus and Jarkko Nikula.
- New ACPI _OSI blacklist entry for Toshiba NB100 from Levente Kurusa.
- Assorted fixes and cleanups related to ACPI from Andy Shevchenko, Al
Stone, Bartlomiej Zolnierkiewicz, Colin Ian King, Dan Carpenter,
Felipe Contreras, Jianguo Wu, Lan Tianyu, Yinghai Lu, Mathias Krause,
Liu Chuansheng.
- Assorted PM fixes and cleanups from Andy Shevchenko, Thierry Reding,
Jean-Christophe Plagniol-Villard.
* tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (386 commits)
cpufreq: conservative: fix requested_freq reduction issue
ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines
PM / runtime: Use pm_runtime_put_sync() in __device_release_driver()
ACPI / event: remove unneeded NULL pointer check
Revert "ACPI / video: Ignore BIOS initial backlight value for HP 250 G1"
ACPI / video: Quirk initial backlight level 0
ACPI / video: Fix initial level validity test
intel_pstate: skip the driver if ACPI has power mgmt option
PM / hibernate: Avoid overflow in hibernate_preallocate_memory()
ACPI / hotplug: Do not execute "insert in progress" _OST
ACPI / hotplug: Carry out PCI root eject directly
ACPI / hotplug: Merge device hot-removal routines
ACPI / hotplug: Make acpi_bus_hot_remove_device() internal
ACPI / hotplug: Simplify device ejection routines
ACPI / hotplug: Fix handle_root_bridge_removal()
ACPI / hotplug: Refuse to hot-remove all objects with disabled hotplug
ACPI / scan: Start matching drivers after trying scan handlers
ACPI: Remove acpi_pci_slot_init() headers from internal.h
ACPI / blacklist: fix name of ThinkPad Edge E530
PowerCap: Fix build error with option -Werror=format-security
...
Conflicts:
arch/arm/mach-omap2/opp.c
drivers/Kconfig
drivers/spi/spi.c
There are no too intrusive changes in this update batch. The biggest
LOC is found in the new DICE driver, and other small changes are
scattered over the whole sound subtree (which is a common pattern).
Below are highlights:
- ALSA core:
* Memory allocation support with genpool
* Fix blocking in drain ioctl of compress_offload
- HD-audio:
* Improved AMD HDMI supports
* Intel HDMI detection improvements
* thinkpad_acpi mute-key integration
* New PCI ID, New ALC255,285,293 codecs, CX20952
- USB-audio:
* New buffer size management
* Clean up endpoint handling codes
- ASoC:
* Further work on the dmaengine helpers, including support for
configuring the parameters for DMA by reading the capabilities of
the DMA controller which removes some guesswork and magic numbers
from drivers.
* A refresh of the documentation.
* Conversions of many drivers to direct regmap API usage in order to
allow the ASoC level register I/O code to be removed, this will
hopefully be completed by v3.14.
* Support for using async register I/O in DAPM, reducing the time
taken to implement power transitions on systems that support it.
- Fireiwre: DICE driver
- Lots of small fixes for bugs reported by Coverity
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=lxuj
-----END PGP SIGNATURE-----
Merge tag 'sound-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"There are no too intrusive changes in this update batch. The biggest
LOC is found in the new DICE driver, and other small changes are
scattered over the whole sound subtree (which is a common pattern).
Below are highlights:
- ALSA core:
* Memory allocation support with genpool
* Fix blocking in drain ioctl of compress_offload
- HD-audio:
* Improved AMD HDMI supports
* Intel HDMI detection improvements
* thinkpad_acpi mute-key integration
* New PCI ID, New ALC255,285,293 codecs, CX20952
- USB-audio:
* New buffer size management
* Clean up endpoint handling codes
- ASoC:
* Further work on the dmaengine helpers, including support for
configuring the parameters for DMA by reading the capabilities of
the DMA controller which removes some guesswork and magic numbers
from drivers.
* A refresh of the documentation.
* Conversions of many drivers to direct regmap API usage in order
to allow the ASoC level register I/O code to be removed, this
will hopefully be completed by v3.14.
* Support for using async register I/O in DAPM, reducing the time
taken to implement power transitions on systems that support it.
- Firewire: DICE driver
- Lots of small fixes for bugs reported by Coverity"
* tag 'sound-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (382 commits)
ALSA: hda/realtek - Add new codec ALC255/ALC3234 UAJ supported
ALSA: hda - Apply MacBook fixups for CS4208 correctly
ASoC: fsl: imx-wm8962: remove an unneeded check
ASoC: fsl: imx-pcm-fiq: Remove unused 'runtime' variable
ALSA: hda/realtek - Make fixup regs persist after resume
ALSA: hda_intel: ratelimit "spurious response" message
ASoC: generic-dmaengine-pcm: Use SNDRV_DMA_TYPE_DEV_IRAM as default
ASoC: dapm: Use WARN_ON() instead of BUG_ON()
ASoC: wm_adsp: Fix BUG_ON() and WARN_ON() usages
ASoC: Replace BUG() with WARN()
ASoC: wm_hubs: Replace BUG() with WARN()
ASoC: wm8996: Replace BUG() with WARN()
ASoC: wm8962: Replace BUG() with WARN()
ASoC: wm8958: Replace BUG() with WARN()
ASoC: wm8904: Replace BUG() with WARN()
ASoC: wm8900: Replace BUG() with WARN()
ASoC: wm8350: Replace BUG() with WARN()
ASoC: txx9: Use WARN_ON() instead of BUG_ON()
ASoC: sh: Use WARN_ON() instead of BUG_ON()
ASoC: rcar: Use WARN_ON() instead of BUG_ON()
...
Pull x86/intel-mid changes from Ingo Molnar:
"Update the 'intel mid' (mobile internet device) platform code as Intel
is rolling out more SoC designs.
This gets rid of most of the 'MRST' platform code in the process,
mostly by renaming and shuffling code around into their respective
'intel-mid' platform drivers"
* 'x86-intel-mid-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, intel-mid: Do not re-introduce usage of obsolete __cpuinit
intel_mid: Move platform device setups to their own platform_<device>.* files
x86: intel-mid: Add section for sfi device table
intel-mid: sfi: Allow struct devs_id.get_platform_data to be NULL
intel_mid: Moved SFI related code to sfi.c
intel_mid: Added custom handler for ipc devices
intel_mid: Added custom device_handler support
intel_mid: Refactored sfi_parse_devs() function
intel_mid: Renamed *mrst* to *intel_mid*
pci: intel_mid: Return true/false in function returning bool
intel_mid: Renamed *mrst* to *intel_mid*
mrst: Fixed indentation issues
mrst: Fixed printk/pr_* related issues
A few final updates for v3.13, all driver updates apart from some DPCM
and Coverity fixes which should have minor impact on practical systems.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=EOnb
-----END PGP SIGNATURE-----
Merge tag 'asoc-v3.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Final updates for v3.13
A few final updates for v3.13, all driver updates apart from some DPCM
and Coverity fixes which should have minor impact on practical systems.
* acpi-video:
ACPI: Add Toshiba NB100 to Vista _OSI blacklist
ACPI / video: Ignore BIOS initial backlight value for HP 250 G1
ACPI / video: Add Lenovo IdeaPad Yoga 13 to acpi video detect blacklist
thinkpad-acpi: fix handle locate for video and query of _BCL
ACPI / video: Do not register backlight if win8 and native interface exists
ACPI / video: seperate backlight control and event interface
backlight: introduce backlight_device_registered
ACPI: add missing win8 OSI comment to blacklist
ACPI: update win8 OSI blacklist
* acpi-conversion:
ACPI / AC: Remove AC's proc directory.
ideapad_laptop: convert ideapad device/driver to platform bus
ideapad_laptop: remove ideapad_handle and ideapad_priv
ideapad_laptop: convert internal function calls to use ideapad_private as parameter
ideapad_laptop: introduce struct acpi_device pointer to ideapad_private structure
ideapad_laptop: introduce #ifdef CONFIG_PM_SLEEP for PM specific code
ACPI / AC: convert ACPI ac driver to platform bus
Fix build error in asus_wmi.c when ASUS_WMI=y and ACPI_VIDEO=m
by preventing that combination.
drivers/built-in.o: In function `asus_wmi_probe':
asus-wmi.c:(.text+0x65ddb4): undefined reference to `acpi_video_unregister'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Do not touch keyboard backlight unless explicitly passed a module
parameter. In this way we won't make wrong assumptions about what are
good default values since they actually are different from model to
model.
The only side effect is that we won't know what is the current value
until set via the sysfs attributes.
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mrst is used as common name to represent all intel_mid type
soc's. But moorsetwon is just one of the intel_mid soc. So
renamed them to use intel_mid.
This patch mainly renames the variables and related
functions that uses *mrst* prefix with *intel_mid*.
To ensure that there are no functional changes, I have compared
the objdump of related files before and after rename and found
the only difference is symbol and name changes.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: http://lkml.kernel.org/r/1382049336-21316-6-git-send-email-david.a.cohen@linux.intel.com
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Following files contains code that is common to all intel mid
soc's. So renamed them as below.
mrst/mrst.c -> intel-mid/intel-mid.c
mrst/vrtc.c -> intel-mid/intel_mid_vrtc.c
mrst/early_printk_mrst.c -> intel-mid/intel_mid_vrtc.c
pci/mrst.c -> pci/intel_mid_pci.c
Also, renamed the corresponding header files and made changes
to the driver files that included these header files.
To ensure that there are no functional changes, I have compared
the objdump of renamed files before and after rename and found
that the only difference is file name change.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: http://lkml.kernel.org/r/1382049336-21316-4-git-send-email-david.a.cohen@linux.intel.com
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The LEDs are currently not visible to userspace, for security
reasons. They are exported through thinkpad_acpi.h for use by the
snd-hda-intel driver.
Thanks to Alex Hung <alex.hung@canonical.com> and Takashi Iwai
<tiwai@suse.de> for writing parts of this patch.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The tpacpi_acpi_handle_locate function makes use of acpi_get_devices to
locate handle for ACPI video by HID, the problem is, ACPI video node
doesn't really have HID defined(i.e. no _HID control method is defined
for video device), so.. that function would fail. This can be solved by
enhancing the callback function for acpi_get_devices, where we can use
acpi_device_hid function to check if the ACPI node corresponds to a
video controller.
In addition to that, the _BCL control method only exists under a video
output device node, not a video controller device node. So to evaluate
_BCL, we need the handle of a video output device node, which is child
of the located video controller node from tpacpi_acpi_handle_locate.
The two fix are necessary for some Thinkpad models to emit notification
on backlight hotkey press as a result of evaluation of _BCL.
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Tested-by: Igor Gnatenko <i.gnatenko.brain@gmail.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch does two things,
1. enumerate the ideapad device node to platform bus.
2. convert the current driver from ACPI bus to platform bus.
Note, with this patch, the platform device node created by ACPI,
with the name VPC2004:00, is used as the parent device of
the input, backlight, rfkill sysfs class device.
Plus the ideapad_platform private sysfs attributes,
i.e. camera_power and fan_mode, are also moved to the new
platform device node.
The previous platform device node "ideapad" is removed.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
CC: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The current code use ideapad_handle and ideapad_priv to store
some information for the ideapad device.
But as they are global/static variables, the driver will be broken
if there are more than one ideapad ACPI device node on a platform.
Although this does not happen for now and may not happen in the future,
but still, this is a software bug.
Remove these two variables in this patch.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
CC: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As struct ideapad_private has all the information needed for any operations,
convert ideapad_register_rfkill()/ideapad_unregister_rfkill() and
ideapad_sync_touchpad_state() to use struct ideapad_private as the parameter,
to be consistent with the others.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
CC: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Introduce struct acpi_device pointer to ideapad_private structure.
At the same time, replace all adevice with adev to be short and consistent.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
CC: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ideapad_acpi_resume() and ideapad_pm is meaningful
only if CONFIG_PM_SLEEP is set.
Thus introduce #ifdef for this piece of code.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
CC: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_evaluate_integer() is an ACPI API introduced to evaluate an
ACPI control method that is known to have an integer return value.
This API can simplify the code because the calling function does not need to
use the specified acpi_buffer structure required by acpi_evaluate_object();
Convert acpi_evaluate_object() to acpi_evaluate_integer()
in drivers/platform/x86/toshiba_acpi.c in this patch.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_evaluate_integer() is an ACPI API introduced to evaluate an
ACPI control method that is known to have an integer return value.
This API can simplify the code because the calling function does not need to
use the specified acpi_buffer structure required by acpi_evaluate_object();
Convert acpi_evaluate_object() to acpi_evaluate_integer()
in drivers/platform/x86/intel-smartconnect.c in this patch.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_evaluate_integer() is an ACPI API introduced to evaluate an
ACPI control method that is known to have an integer return value.
This API can simplify the code because the calling function does not need to
use the specified acpi_buffer structure required by acpi_evaluate_object();
Convert acpi_evaluate_object() to acpi_evaluate_integer()
in drivers/platform/x86/intel-rst.c in this patch.
Plus, this should also fix a memory leak that
the acpi_buffer is not freed in some cases.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_evaluate_integer() is an ACPI API introduced to evaluate an
ACPI control method that is known to have an integer return value.
This API can simplify the code because the calling function does not need to
use the specified acpi_buffer structure required by acpi_evaluate_object();
Convert acpi_evaluate_object() to acpi_evaluate_integer()
in drivers/platform/x86/fujitsu-laptop.c in this patch.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_has_method() is a new ACPI API introduced to check
the existence of an ACPI control method.
It can be used to replace acpi_get_handle() in the case that
1. the calling function doesn't need the ACPI handle of the control method.
and
2. the calling function doesn't care the reason why the method is unavailable.
Convert acpi_get_handle() to acpi_has_method()
in drivers/platform/x86/wmi.c in this patch.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_has_method() is a new ACPI API introduced to check
the existence of an ACPI control method.
It can be used to replace acpi_get_handle() in the case that
1. the calling function doesn't need the ACPI handle of the control method.
and
2. the calling function doesn't care the reason why the method is unavailable.
Convert acpi_get_handle() to acpi_has_method()
in drivers/platform/x86/toshiba_acpi.c in this patch.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_has_method() is a new ACPI API introduced to check
the existence of an ACPI control method.
It can be used to replace acpi_get_handle() in the case that
1. the calling function doesn't need the ACPI handle of the control method.
and
2. the calling function doesn't care the reason why the method is unavailable.
Convert acpi_get_handle() to acpi_has_method()
in drivers/platform/x86/sony-laptop.c in this patch.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
CC: Mattia Dongili <malattia@linux.it>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_has_method() is a new ACPI API introduced to check
the existence of an ACPI control method.
It can be used to replace acpi_get_handle() in the case that
1. the calling function doesn't need the ACPI handle of the control method.
and
2. the calling function doesn't care the reason why the method is unavailable.
Convert acpi_get_handle() to acpi_has_method()
in drivers/platform/x86/intel_menlow.c in this patch.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_has_method() is a new ACPI API introduced to check
the existence of an ACPI control method.
It can be used to replace acpi_get_handle() in the case that
1. the calling function doesn't need the ACPI handle of the control method.
and
2. the calling function doesn't care the reason why the method is unavailable.
Convert acpi_get_handle() to acpi_has_method()
in drivers/platform/x86/fujitsu-laptop.c in this patch.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_execute_simple_method() is a new ACPI API introduced to invoke
an ACPI control method that has single integer parameter and no return value.
Convert acpi_evaluate_object() to acpi_execute_simple_method()
in drivers/platform/x86/wmi.c
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_execute_simple_method() is a new ACPI API introduced to invoke
an ACPI control method that has single integer parameter and no return value.
Convert acpi_evaluate_object() to acpi_execute_simple_method()
in drivers/platform/x86/toshiba_acpi.c
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_execute_simple_method() is a new ACPI API introduced to invoke
an ACPI control method that has single integer parameter and no return value.
Convert acpi_evaluate_object() to acpi_execute_simple_method()
in drivers/platform/x86/topstar-laptop.c
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
CC: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Giedrius Statkevicius