On KASAN + 16K_PAGES + 48BIT_VA
arch/arm64/mm/kasan_init.c: In function ‘kasan_early_init’:
include/linux/compiler.h:484:38: error: call to ‘__compiletime_assert_95’ declared with attribute error: BUILD_BUG_ON failed: !IS_ALIGNED(KASAN_SHADOW_END, PGDIR_SIZE)
_compiletime_assert(condition, msg, __compiletime_assert_, __LINE__)
Currently KASAN will not work on 16K_PAGES and 48BIT_VA, so
forbid such configuration to avoid above build failure.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reported-by: Suzuki K. Poulose <Suzuki.Poulose@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Recent gcc versions warn about reading from a negative offset of
an on-stack array:
drivers/remoteproc/remoteproc_debugfs.c: In function 'rproc_recovery_write':
drivers/remoteproc/remoteproc_debugfs.c:167:9: warning: 'buf[4294967295u]' may be used uninitialized in this function [-Wmaybe-uninitialized]
I don't see anything in sys_write() that prevents us from
being called with a zero 'count' argument, so we should
add an extra check in rproc_recovery_write() to prevent the
access and avoid the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 2e37abb89a ("remoteproc: create a 'recovery' debugfs entry")
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Today, blockdev --rereadpt /dev/sda will fail with EBUSY if any
partition of sda is mounted (and will fail with EINVAL if pointed
at a partition). But it will pass if the entire block device is
formatted with a filesystem and mounted. I don't think this makes
sense; partitioning should surely not ever change out from under
a mounted device.
So check for bdev->bd_super, and fail that with -EBUSY as well.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Commit 4f258a4634 ("sd: Fix maximum I/O size for BLOCK_PC requests")
had the unfortunate side-effect of removing an implicit clamp to
BLK_DEF_MAX_SECTORS for REQ_TYPE_FS requests in the block layer
code. This caused problems for some SMR drives.
Debugging this issue revealed a few problems with the existing
infrastructure since the block layer didn't know how to deal with
device-imposed limits, only limits set by the I/O controller.
- Introduce a new queue limit, max_dev_sectors, which is used by the
ULD to signal the maximum sectors for a REQ_TYPE_FS request.
- Ensure that max_dev_sectors is correctly stacked and taken into
account when overriding max_sectors through sysfs.
- Rework sd_read_block_limits() so it saves the max_xfer and opt_xfer
values for later processing.
- In sd_revalidate() set the queue's max_dev_sectors based on the
MAXIMUM TRANSFER LENGTH value in the Block Limits VPD. If this value
is not reported, fall back to a cap based on the CDB TRANSFER LENGTH
field size.
- In sd_revalidate(), use OPTIMAL TRANSFER LENGTH from the Block Limits
VPD--if reported and sane--to signal the preferred device transfer
size for FS requests. Otherwise use BLK_DEF_MAX_SECTORS.
- blk_limits_max_hw_sectors() is no longer used and can be removed.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=93581
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: sweeneygj@gmx.com
Tested-by: Arzeets <anatol.pomozov@gmail.com>
Tested-by: David Eisner <david.eisner@oriel.oxon.org>
Tested-by: Mario Kicherer <dev@kicherer.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ruediger Meier observed a regression with the PREVENT ALLOW MEDIUM
REMOVAL command in lk 3.19:
http://www.spinics.net/lists/util-linux-ng/msg11448.html
Inspection indicated the same regression with VERIFY(10).
The patch is against lk 3.19.3 and also works with lk 4.3.0 . With this
patch both commands are accepted and do nothing.
ChangeLog:
- fix the lk 3.19 regression so that the PREVENT ALLOW MEDIUM REMOVAL
command is supported once again
- same fix for VERIFY(10)
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Reviewed-by: Ewan Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A device may report an OPTIMAL UNMAP GRANULARITY and UNMAP GRANULARITY
ALIGNMENT in the Block Limits VPD. These parameters describe the
device's internal provisioning allocation units. By default the block
layer will round and align any discard requests based on these limits.
If a device reports LBPRZ=1 to guarantee zeroes after discard, however,
it is imperative that the block layer does not leave out any parts of
the requested block range. Otherwise the device can not do the required
zeroing of any partial allocation units and this can lead to data
corruption.
Since the dm thinp personality relies on the block layer's current
behavior and is unable to deal with partial discard blocks we work
around the problem by setting the granularity to match the logical block
size when LBPRZ is enabled.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull vfs fixes from Al Viro:
"A couple of fixes for sendfile lockups caught by Dmitry + a fix for
ancient sysvfs symlink breakage"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: Avoid softlockups with sendfile(2)
vfs: Make sendfile(2) killable even better
fix sysvfs symlinks
- A series of audio changes for dra7 that missed the merge window but turned
out to be necessary to fix a boot time imprecise external abort error and to
getaudio working
- Fix l4 related boot time errors for dm81xx
- Use lockless cldm/pwrdm api in omap4_boot_secondary
- Remove t410 custom abort handler that is no longer needed and may
hide other critical errors
- Mark cpuidle tracepoints as _rcuidle
- Fix module alias for omap-ocp2scp
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=G8ox
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.4/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Merge "Fixes for omaps for v4.4-rc cycle" from Tony Lindgren:
- A series of audio changes for dra7 that missed the merge window but turned
out to be necessary to fix a boot time imprecise external abort error and to
getaudio working
- Fix l4 related boot time errors for dm81xx
- Use lockless cldm/pwrdm api in omap4_boot_secondary
- Remove t410 custom abort handler that is no longer needed and may
hide other critical errors
- Mark cpuidle tracepoints as _rcuidle
- Fix module alias for omap-ocp2scp
* tag 'omap-for-v4.4/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP4+: SMP: use lockless clkdm/pwrdm api in omap4_boot_secondary
arm: omap2+: add missing HWMOD_NO_IDLEST in 81xx hwmod data
ARM: OMAP2+: remove custom abort handler for t410
ARM: OMAP: DRA7: hwmod: Add data for McASP3
ARM: OMAP2+: hwmod: Add hwmod flag for HWMOD_OPT_CLKS_NEEDED
ARM: dts: dra7: Fix McASP3 node regarding to clocks
bus: omap-ocp2scp: Fix module alias
ARM: OMAP2+: PM: Denote the cpuidle tracepoints as _rcuidle()
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWUmHZAAoJEHm+PkMAQRiGHtcH/RVRsn8re0WdRWYaTr9+Hknm
CGlRJN4LKecttgYQ/2bS1QsDbt8usDPBiiYVopqGXQxPBmjyDAqPjsa+8VzCaVc6
WA+9LDB+PcW28lD6BO+qSZCOAm7hHSZq7dtw9x658IqO+mI2mVeCybsAyunw2iWi
Kf5q90wq6tIBXuT8YH9MXGrSCQw00NclbYeYwB9CmCt9hT/koEFBdl7uFUFitB+Q
GSPTz5fXhgc5Lms85n7flZlrVKoQKmtDQe4/DvKZm+SjsATHU9ru89OxDBdS5gSG
YcEIM4zc9tMjhs3GC9t6WXf6iFOdctum8HOhUoIN/+LVfeOMRRwAhRVqtGJ//Xw=
=DCUg
-----END PGP SIGNATURE-----
Merge tag 'v4.4-rc2' into fixes
Linux 4.4-rc2 is backmerged from the keystone fixes.
- Add missing .irq_set_type for i.MX GPC irq_chip. It fixes an issue
that device IRQ type setting doesn't match the one specified in device
tree, since stacked IRQ domain is adopted in GPC driver.
- Fix the wrong spi-num-chipselects settings for Vybrid DSPI devices.
- Fix a merge error in Vybrid dts regarding to ADC device property
fsl,adck-max-frequency
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWVbYUAAoJEFBXWFqHsHzOUGwH/1leThviODjyQpau7fEP0qQs
/yfdo+QSKDA/qsv3PK0yyqI1W+eVnlt0EtW38fgnpmgK53dML4eneK5qFTCFJlqp
9+lZAw+yyip3AOK5Cfpr6GnzB5JS60JWotUvrT+ZFIWycL/foGB7By9F7r4KBNWT
P9Lz6bqYVVh/qPAAvWF8Xq0BW8CSdyRkUrjCWJoZjiXRTCxRP4bSF0FYiFw51qMv
x1PZf79ANAsKUtfT8wh71Iiiq10dJqSdmvmnIs1Kk2jfv0fvVz4YKGodNCX/nZdO
xozx+SMcb0j2iefRMoS/wHNFpHAcJC4nnostS9Dk47oFzaatNqELqwBXhxKIJe0=
=ExDB
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
Merge "The i.MX fixes for 4.4" from Shawn Guo:
- Add missing .irq_set_type for i.MX GPC irq_chip. It fixes an issue
that device IRQ type setting doesn't match the one specified in device
tree, since stacked IRQ domain is adopted in GPC driver.
- Fix the wrong spi-num-chipselects settings for Vybrid DSPI devices.
- Fix a merge error in Vybrid dts regarding to ADC device property
fsl,adck-max-frequency
* tag 'imx-fixes-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: vfxxx: Fix dspi[01] spi-num-chipselects.
ARM: imx: add platform irq type setting in gpc
ARM: dts: vfxxx: Fix erroneous property in esdhc0 node
If hardware-driven P-state selection (HWP) is enabled, the
"performance" mode of intel_pstate should only allow the processor
to use the highest-performance P-state available. That is not
the case currently, so make it actually happen.
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com>
[ rjw: Subject and changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
commit f1ccd24931 allowed the cmdline "cpu_init_udelay=" to work
with all values, including the default of 10000.
But in setting the default of 10000, it over-rode the code that sets
the delay 0 on modern processors.
Also, tidy up use of INT/UINT.
Fixes: f1ccd24931 "x86/smpboot: Fix cpu_init_udelay=10000 corner case boot parameter misbehavior"
Reported-by: Shane <shrybman@teksavvy.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: dparsons@brightdsl.net
Cc: stable@kernel.org
Link: http://lkml.kernel.org/r/9082eb809ef40dad02db714759c7aaf618c518d4.1448232494.git.len.brown@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
pnfs_layout_process will check the returned layout stateid against what
the kernel has in-core. If it turns out that the stateid we received is
older, then we should resend the LAYOUTGET instead of falling back to
MDS I/O.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Cc: stable@vger.kernel.org # 3.18+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If we pass in an empty nfs_fattr struct to nfs_update_inode, it will
(correctly) not update any of the attributes, but it then clears the
NFS_INO_INVALID_ATTR flag, which indicates that the attributes are
up to date. Don't clear the flag if the fattr struct has no valid
attrs to apply.
Reviewed-by: Steve French <steve.french@primarydata.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If we get no post-op attributes back from a SETATTR operation, then no
attributes will of course be updated during the call to
nfs_update_inode.
We know however that the attributes are invalid at that point, since we
just changed some of them. At the very least, the ctime will be bogus.
If we get no post-op attributes back on the call, mark the attrcache
invalid to reflect that fact.
Reviewed-by: Steve French <steve.french@primarydata.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Commit b3a72384fe ("ARM/PCI: Replace pci_sys_data->align_resource with
global function pointer") introduced an ARM-specific align_resource()
function pointer. This is not portable to other arches and doesn't work
for platforms with two different PCIe host bridge controllers.
Move the function pointer to the pci_host_bridge structure so each host
bridge driver can specify its own align_resource() function.
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Pull more block layer fixes from Jens Axboe:
"I wasn't going to send off a new pull before next week, but the blk
flush fix from Jan from the other day introduced a regression. It's
rare enough not to have hit during testing, since it requires both a
device that rejects the first flush, and bad timing while it does
that. But since someone did hit it, let's get the revert into 4.4-rc3
so we don't have a released rc with that known issue.
Apart from that revert, three other fixes:
- From Christoph, a fix for a missing unmap in NVMe request
preparation.
- An NVMe fix from Nishanth that fixes data corruption on powerpc.
- Also from Christoph, fix a list_del() attempt on blk-mq that didn't
have a matching list_add() at timer start"
* 'for-linus' of git://git.kernel.dk/linux-block:
Revert "blk-flush: Queue through IO scheduler when flush not required"
block: fix blk_abort_request for blk-mq drivers
nvme: add missing unmaps in nvme_queue_rq
NVMe: default to 4k device page size
OMAP CPU hotplug uses cpu1's clocks and power domains for CPU1 wake up
from low power states (or turn on CPU1). This part of code is also
part of system suspend (disable_nonboot_cpus()).
>From other side, cpu1's clocks and power domains are used by CPUIdle. All above
functionality is mutually exclusive and, therefore, lockless clkdm/pwrdm api
can be used in omap4_boot_secondary().
This fixes below back-trace on -RT which is triggered by
pwrdm_lock/unlock():
BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917
in_atomic(): 1, irqs_disabled(): 0, pid: 118, name: sh
9 locks held by sh/118:
#0: (sb_writers#4){.+.+.+}, at: [<c0144a6c>] vfs_write+0x13c/0x164
#1: (&of->mutex){+.+.+.}, at: [<c01b4c70>] kernfs_fop_write+0x48/0x19c
#2: (s_active#24){.+.+.+}, at: [<c01b4c78>] kernfs_fop_write+0x50/0x19c
#3: (device_hotplug_lock){+.+.+.}, at: [<c03cbff0>] lock_device_hotplug_sysfs+0xc/0x4c
#4: (&dev->mutex){......}, at: [<c03cd284>] device_online+0x14/0x88
#5: (cpu_add_remove_lock){+.+.+.}, at: [<c003af90>] cpu_up+0x50/0x1a0
#6: (cpu_hotplug.lock){++++++}, at: [<c003ae48>] cpu_hotplug_begin+0x0/0xc4
#7: (cpu_hotplug.lock#2){+.+.+.}, at: [<c003aec0>] cpu_hotplug_begin+0x78/0xc4
#8: (boot_lock){+.+...}, at: [<c002b254>] omap4_boot_secondary+0x1c/0x178
Preemption disabled at:[< (null)>] (null)
CPU: 0 PID: 118 Comm: sh Not tainted 4.1.12-rt11-01998-gb4a62c3-dirty #137
Hardware name: Generic DRA74X (Flattened Device Tree)
[<c0017574>] (unwind_backtrace) from [<c0013be8>] (show_stack+0x10/0x14)
[<c0013be8>] (show_stack) from [<c05a8670>] (dump_stack+0x80/0x94)
[<c05a8670>] (dump_stack) from [<c05ad158>] (rt_spin_lock+0x24/0x54)
[<c05ad158>] (rt_spin_lock) from [<c0030dac>] (clkdm_wakeup+0x10/0x2c)
[<c0030dac>] (clkdm_wakeup) from [<c002b2c0>] (omap4_boot_secondary+0x88/0x178)
[<c002b2c0>] (omap4_boot_secondary) from [<c0015d00>] (__cpu_up+0xc4/0x164)
[<c0015d00>] (__cpu_up) from [<c003b09c>] (cpu_up+0x15c/0x1a0)
[<c003b09c>] (cpu_up) from [<c03cd2d4>] (device_online+0x64/0x88)
[<c03cd2d4>] (device_online) from [<c03cd360>] (online_store+0x68/0x74)
[<c03cd360>] (online_store) from [<c01b4ce0>] (kernfs_fop_write+0xb8/0x19c)
[<c01b4ce0>] (kernfs_fop_write) from [<c0144124>] (__vfs_write+0x20/0xd8)
[<c0144124>] (__vfs_write) from [<c01449c0>] (vfs_write+0x90/0x164)
[<c01449c0>] (vfs_write) from [<c01451e4>] (SyS_write+0x44/0x9c)
[<c01451e4>] (SyS_write) from [<c0010240>] (ret_fast_syscall+0x0/0x54)
CPU1: smp_ops.cpu_die() returned, trying to resuscitate
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add missing HWMOD_NO_IDLEST hwmod flag for entries not
having omap4 clkctrl values.
The emac0 hwmod flag fixes the davinci_emac driver probe
since the return of pm_resume() call is now checked.
This solves the following boot errors :
[ 0.121429] omap_hwmod: l4_ls: _wait_target_ready failed: -16
[ 0.121441] omap_hwmod: l4_ls: cannot be enabled for reset (3)
[ 0.124342] omap_hwmod: l4_hs: _wait_target_ready failed: -16
[ 0.124352] omap_hwmod: l4_hs: cannot be enabled for reset (3)
[ 1.967228] omap_hwmod: emac0: _wait_target_ready failed: -16
Cc: Brian Hutchinson <b.hutchman@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Currently, when having map file descriptors pointing to program arrays,
there's still the issue that we unconditionally flush program array
contents via bpf_fd_array_map_clear() in bpf_map_release(). This happens
when such a file descriptor is released and is independent of the map's
refcount.
Having this flush independent of the refcount is for a reason: there
can be arbitrary complex dependency chains among tail calls, also circular
ones (direct or indirect, nesting limit determined during runtime), and
we need to make sure that the map drops all references to eBPF programs
it holds, so that the map's refcount can eventually drop to zero and
initiate its freeing. Btw, a walk of the whole dependency graph would
not be possible for various reasons, one being complexity and another
one inconsistency, i.e. new programs can be added to parts of the graph
at any time, so there's no guaranteed consistent state for the time of
such a walk.
Now, the program array pinning itself works, but the issue is that each
derived file descriptor on close would nevertheless call unconditionally
into bpf_fd_array_map_clear(). Instead, keep track of users and postpone
this flush until the last reference to a user is dropped. As this only
concerns a subset of references (f.e. a prog array could hold a program
that itself has reference on the prog array holding it, etc), we need to
track them separately.
Short analysis on the refcounting: on map creation time usercnt will be
one, so there's no change in behaviour for bpf_map_release(), if unpinned.
If we already fail in map_create(), we are immediately freed, and no
file descriptor has been made public yet. In bpf_obj_pin_user(), we need
to probe for a possible map in bpf_fd_probe_obj() already with a usercnt
reference, so before we drop the reference on the fd with fdput().
Therefore, if actual pinning fails, we need to drop that reference again
in bpf_any_put(), otherwise we keep holding it. When last reference
drops on the inode, the bpf_any_put() in bpf_evict_inode() will take
care of dropping the usercnt again. In the bpf_obj_get_user() case, the
bpf_any_get() will grab a reference on the usercnt, still at a time when
we have the reference on the path. Should we later on fail to grab a new
file descriptor, bpf_any_put() will drop it, otherwise we hold it until
bpf_map_release() time.
Joint work with Alexei.
Fixes: b2197755b2 ("bpf: add support for persistent maps/progs")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 1b2ff19e6a.
Jan writes:
--
Thanks for report! After some investigation I found out we allocate
elevator specific data in __get_request() only for non-flush requests. And
this is actually required since the flush machinery uses the space in
struct request for something else. Doh. So my patch is just wrong and not
easy to fix since at the time __get_request() is called we are not sure
whether the flush machinery will be used in the end. Jens, please revert
1b2ff19e6a. Thanks!
I'm somewhat surprised that you can reliably hit the race where flushing
gets disabled for the device just while the request is in flight. But I
guess during boot it makes some sense.
--
So let's just revert it, we can fix the queue run manually after the
fact. This race is rare enough that it didn't trigger in testing, it
requires the specific disable-while-in-flight scenario to trigger.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJWVcuuAAoJEL/70l94x66DmUEIAKnU6SCojoFOxWY0/EH/PBue
m53mjiRiHp+YH/74dW0XF843+IKLfbLiADRaWHTqc9VW0ifnXmRjOv/bYpC7I/+R
8XKHaJZQfpb6yvICEqWvMItBpddoakbhv8DJOf4bUfipNY0zx5F2STFfx0KICtbc
mHTB4y5bFgIz8mJBLX+Dmh/UyXL0kbjSnksu0WA80Szr0pq2Sr4Csrx8PqGAEfIJ
e5DUW0h3UXY77J5fQbpgJs93hzp1YwkuRKEeYpB8POx4fmvssHoybmOk46sP0Ipb
IYxrJ+CUQ4o6Vpp3LTMjzMfJ4Y/NaOHCvYxL0okhxtUuq+UbUZjM5ziclfQ/32M=
=cbxQ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Bug fixes for all architectures. Nothing really stands out"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
KVM: nVMX: remove incorrect vpid check in nested invvpid emulation
arm64: kvm: report original PAR_EL1 upon panic
arm64: kvm: avoid %p in __kvm_hyp_panic
KVM: arm/arm64: vgic: Trust the LR state for HW IRQs
KVM: arm/arm64: arch_timer: Preserve physical dist. active state on LR.active
KVM: arm/arm64: Fix preemptible timer active state crazyness
arm64: KVM: Add workaround for Cortex-A57 erratum 834220
arm64: KVM: Fix AArch32 to AArch64 register mapping
ARM/arm64: KVM: test properly for a PTE's uncachedness
KVM: s390: fix wrong lookup of VCPUs by array index
KVM: s390: avoid memory overwrites on emergency signal injection
KVM: Provide function for VCPU lookup by id
KVM: s390: fix pfmf intercept handler
KVM: s390: enable SIMD only when no VCPUs were created
KVM: x86: request interrupt window when IRQ chip is split
KVM: x86: set KVM_REQ_EVENT on local interrupt request from user space
KVM: x86: split kvm_vcpu_ready_for_interrupt_injection out of dm_request_for_irq_injection
KVM: x86: fix interrupt window handling in split IRQ chip case
MIPS: KVM: Uninit VCPU in vcpu_create error path
MIPS: KVM: Fix CACHE immediate offset sign extension
...
Commit 35a4a57 ("isdn: clean up debug format string usage") introduced
a safeguard to avoid accidential format string interpolation of data
when calling debugl1 or HiSax_putstatus. This did however not take into
account VHiSax_putstatus (called by HiSax_putstatus) does *not* call
vsprintf if the head parameter is NULL - the format string is treated
as plain text then instead. As a result, the string "%s" is processed
literally, and the actual information is lost. This affects the isdnlog
userspace program which stopped logging information since that commit.
So revert the HiSax_putstatus invocations to the previous state.
Fixes: 35a4a5733b ("isdn: clean up debug format string usage")
Cc: Kees Cook <keescook@chromium.org>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
"Could not force DPM to low", etc. is usually harmless and
just confuses users.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The kernel may use a page granularity of 4K, 16K, or 64K depending on
configuration.
When mapping EFI runtime regions, we use memrange_efi_to_native to round
the physical base address of a region down to a kernel page boundary,
and round the size up to a kernel page boundary, adding the residue left
over from rounding down the physical base address. We do not round down
the virtual base address.
In __create_mapping we account for the offset of the virtual base from a
granule boundary, adding the residue to the size before rounding the
base down to said granule boundary.
Thus we account for the residue twice, and when the residue is non-zero
will cause __create_mapping to map an additional page at the end of the
region. Depending on the memory map, this page may be in a region we are
not intended/permitted to map, or may clash with a different region that
we wish to map. In typical cases, mapping the next item in the memory
map will overwrite the erroneously created entry, as we sort the memory
map in the stub.
As __create_mapping can cope with base addresses which are not page
aligned, we can instead rely on it to map the region appropriately, and
simplify efi_virtmap_init by removing the unnecessary code.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We are missing descriptions for some valid xFSC values in the fault info
table (e.g. "TLB conflict abort"), and have erroneous descriptions for
reserved values (e.g. "asynchronous external abort", "debug event").
This patch adds the missing xFSC values, and removes erroneous decoding
of values reserved by the architecture, as described in ARM DDI 0487A.h.
At the same time, fixed the unbalanced brackets for the synchronous
parity error strings in the table.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
As reported by Michal Simek, building an ARM64 kernel with CONFIG_UID16
disabled currently fails because the system call table still needs to
reference the individual function entry points that are provided by
kernel/sys_ni.c in this case, and the declarations are hidden inside
of #ifdef CONFIG_UID16:
arch/arm64/include/asm/unistd32.h:57:8: error: 'sys_lchown16' undeclared here (not in a function)
__SYSCALL(__NR_lchown, sys_lchown16)
I believe this problem only exists on ARM64, because older architectures
tend to not need declarations when their system call table is built
in assembly code, while newer architectures tend to not need UID16
support. ARM64 only uses these system calls for compatibility with
32-bit ARM binaries.
This changes the CONFIG_UID16 check into CONFIG_HAVE_UID16, which is
set unconditionally on ARM64 with CONFIG_COMPAT, so we see the
declarations whenever we need them, but otherwise the behavior is
unchanged.
Fixes: af1839eb4b ("Kconfig: clean up the long arch list for the UID16 config option")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently a DDI port may register the DP hotplug handler even though
it's used with HDMI, and the DP HPD handler overrides the encoder
type forcibly to DP. This caused the inconsistency on a machine
connected with a HDMI monitor; upon a hotplug event, the DDI port is
suddenly switched to be handled as a DP although the same monitor is
kept connected, and this leads to the erroneous blank output.
This patch papers over the bug by excluding the previous HDMI encoder
type from this override. This should be fixed more fundamentally,
e.g. by moving the encoder type reset from the HPD or by having
individual encoder objects for HDMI and DP. But since the bug has
been present for a long time (3.17), it's better to have a
quick-n-dirty fix for now, and keep working on a cleaner fix.
Bugzilla: http://bugzilla.opensuse.org/show_bug.cgi?id=955190
Fixes: 0e32b39cee ('drm/i915: add DP 1.2 MST support (v0.7)')
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1447931396-19147-1-git-send-email-tiwai@suse.de
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The commit [cfb23ed622d0: drm/i915: Allow fuzzy matching in
pipe_config_compare, v2] relaxed the way to compare the pipe
configurations, but one new comparison sneaked in there: it added the
strict has_drrs value check. This causes a regression on many
machines, typically HP laptops with a docking port, where the kernel
spews warnings and eventually fails to set the mode properly like:
[drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in has_drrs (expected 1, found 0)
------------[ cut here ]------------
WARNING: CPU: 0 PID: 79 at drivers/gpu/drm/i915/intel_display.c:12700 intel_modeset_check_state+0x5aa/0x870 [i915]()
pipe state doesn't match!
....
This patch just removes the check again for fixing the regression.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=104041
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92456
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=956397
Fixes: cfb23ed622 ('drm/i915: Allow fuzzy matching in pipe_config_compare, v2')
Cc: <stable@vger.kernel.org> # v4.3+
Reported-and-tested-by: Max Lin <mlin@suse.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1448461607-16868-1-git-send-email-tiwai@suse.de
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Commit 5be9fc23cd ("ARM: orion5x: fix legacy orion5x IRQ numbers") shifted
IRQ numbers by one but didn't update the get_irqnr_and_base macro
accordingly. This macro is involved when CONFIG_MULTI_IRQ_HANDLER
is not defined.
[jac: 5d6bed2a9c went in to v4.2, but was backported to v3.18]
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Fixes: 5be9fc23cd ("ARM: orion5x: fix legacy orion5x IRQ numbers")
Cc: <stable@vger.kernel.org> # v3.18+
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Commit 5d6bed2a9c ("ARM: dove: fix legacy dove IRQ numbers") shifted
IRQ numbers by one but didn't update the get_irqnr_and_base macro
accordingly. This macro is involved when CONFIG_MULTI_IRQ_HANDLER
is not defined.
[jac: 5d6bed2a9c went in to v4.2, but was backported to v3.18]
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Fixes: 5d6bed2a9c ("ARM: dove: fix legacy dove IRQ numbers")
Cc: <stable@vger.kernel.org> # v3.18+
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This patch removes the vpid check when emulating nested invvpid
instruction of type all-contexts invalidation. The existing code is
incorrect because:
(1) According to Intel SDM Vol 3, Section "INVVPID - Invalidate
Translations Based on VPID", invvpid instruction does not check
vpid in the invvpid descriptor when its type is all-contexts
invalidation.
(2) According to the same document, invvpid of type all-contexts
invalidation does not require there is an active VMCS, so/and
get_vmcs12() in the existing code may result in a NULL-pointer
dereference. In practice, it can crash both KVM itself and L1
hypervisors that use invvpid (e.g. Xen).
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's a regression in 4.4-rc since commit bc3094673f
(btrfs: extend balance filter usage to take minimum and maximum) in that
existing (non-ranged) balance with -dusage=x no longer works; all chunks
are skipped.
After staring at the code for a while and wondering why a non-ranged
balance would even need min and max thresholds (..which then were not
set correctly, leading to the bug) I realized that the only problem
was the fact that the filter functions were named wrong, thanks to
patching copypasta. Simply renaming both functions lets the existing
btrfs-progs call balance with -dusage=x and now the non-ranged filter
function is invoked, properly using only a single chunk limit.
Signed-off-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com>
Fixes: bc3094673f ("btrfs: extend balance filter usage to take minimum and maximum")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Commit 0ed4792 ('btrfs: qgroup: Switch to new extent-oriented qgroup
mechanism.') removed our qgroup accounting during
btrfs_drop_snapshot(). Predictably, this results in qgroup numbers
going bad shortly after a snapshot is removed.
Fix this by adding a dirty extent record when we encounter extents during
our shared subtree walk. This effectively restores the functionality we had
with the original shared subtree walking code in 1152651 (btrfs: qgroup:
account shared subtrees during snapshot delete).
The idea with the original patch (and this one) is that shared subtrees can
get skipped during drop_snapshot. The shared subtree walk then allows us a
chance to visit those extents and add them to the qgroup work for later
processing. This ultimately makes the accounting for drop snapshot work.
The new qgroup code nicely handles all the other extents during the tree
walk via the ref dec/inc functions so we don't have to add actions beyond
what we had originally.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Chris Mason <clm@fb.com>
The backref code will look up the fs_root we're trying to resolve our indirect
refs for, unfortunately we use btrfs_read_fs_root_no_name, which returns -ENOENT
if the ref is 0. This isn't helpful for the qgroup stuff with snapshot delete
as it won't be able to search down the snapshot we are deleting, which will
cause us to miss roots. So use btrfs_get_fs_root and send false for check_ref
so we can always get the root we're looking for. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Chris Mason <clm@fb.com>
There's a race condition that leads to a NULL pointer dereference if you
disable quotas while a quota rescan is running. To fix this, we just need
to wait for the quota rescan worker to actually exit before tearing down
the quota structures.
Signed-off-by: Justin Maggard <jmaggard@netgear.com>
Signed-off-by: Chris Mason <clm@fb.com>
When a block group becomes unused and the cleaner kthread is currently
running, we can end up getting the current transaction aborted with error
-ENOENT when we try to commit the transaction, leading to the following
trace:
[59779.258768] WARNING: CPU: 3 PID: 5990 at fs/btrfs/extent-tree.c:3740 btrfs_write_dirty_block_groups+0x17c/0x214 [btrfs]()
[59779.272594] BTRFS: Transaction aborted (error -2)
(...)
[59779.291137] Call Trace:
[59779.291621] [<ffffffff812566f4>] dump_stack+0x4e/0x79
[59779.292543] [<ffffffff8104d0a6>] warn_slowpath_common+0x9f/0xb8
[59779.293435] [<ffffffffa04cb81f>] ? btrfs_write_dirty_block_groups+0x17c/0x214 [btrfs]
[59779.295000] [<ffffffff8104d107>] warn_slowpath_fmt+0x48/0x50
[59779.296138] [<ffffffffa04c2721>] ? write_one_cache_group.isra.32+0x77/0x82 [btrfs]
[59779.297663] [<ffffffffa04cb81f>] btrfs_write_dirty_block_groups+0x17c/0x214 [btrfs]
[59779.299141] [<ffffffffa0549b0d>] commit_cowonly_roots+0x1de/0x261 [btrfs]
[59779.300359] [<ffffffffa04dd5b6>] btrfs_commit_transaction+0x4c4/0x99c [btrfs]
[59779.301805] [<ffffffffa04b5df4>] btrfs_sync_fs+0x145/0x1ad [btrfs]
[59779.302893] [<ffffffff81196634>] sync_filesystem+0x7f/0x93
(...)
[59779.318186] ---[ end trace 577e2daff90da33a ]---
The following diagram illustrates a sequence of steps leading to this
problem:
CPU 1 CPU 2
<at transaction N>
adds bg A to list
fs_info->unused_bgs
adds bg B to list
fs_info->unused_bgs
<transaction kthread
commits transaction N
and wakes up the
cleaner kthread>
cleaner kthread
delete_unused_bgs()
sees bg A in list
fs_info->unused_bgs
btrfs_start_transaction()
<transaction N + 1 starts>
deletes bg A
update_block_group(bg C)
--> adds bg C to list
fs_info->unused_bgs
deletes bg B
sees bg C in the list
fs_info->unused_bgs
btrfs_remove_chunk(bg C)
btrfs_remove_block_group(bg C)
--> checks if the block group
is in a dirty list, and
because it isn't now, it
does nothing
--> the block group item
is deleted from the
extent tree
--> adds bg C to list
transaction->dirty_bgs
some task calls
btrfs_commit_transaction(t N + 1)
commit_cowonly_roots()
btrfs_write_dirty_block_groups()
--> sees bg C in cur_trans->dirty_bgs
--> calls write_one_cache_group()
which returns -ENOENT because
it did not find the block group
item in the extent tree
--> transaction aborte with -ENOENT
because write_one_cache_group()
returned that error
So fix this by adding a block group to the list of dirty block groups
before adding it to the list of unused block groups.
This happened on a stress test using fsstress plus concurrent calls to
fallocate 20G and truncate (releasing part of the space allocated with
fallocate).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Currently scrub can race with the cleaner kthread when the later attempts
to delete an unused block group, and the result is preventing the cleaner
kthread from ever deleting later the block group - unless the block group
becomes used and unused again. The following diagram illustrates that
race:
CPU 1 CPU 2
cleaner kthread
btrfs_delete_unused_bgs()
gets block group X from
fs_info->unused_bgs and
removes it from that list
scrub_enumerate_chunks()
searches device tree using
its commit root
finds device extent for
block group X
gets block group X from the tree
fs_info->block_group_cache_tree
(via btrfs_lookup_block_group())
sets bg X to RO
sees the block group is
already RO and therefore
doesn't delete it nor adds
it back to unused list
So fix this by making scrub add the block group again to the list of
unused block groups if the block group is still unused when it finished
scrubbing it and it hasn't been removed already.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Andrey Ryabinin